Roland KSC-68 Stand Owner's Manual PDF

1 of 8
1 of 8

Summary of Content for Roland KSC-68 Stand Owner's Manual PDF

Before using this stand, carefully read the sections entitled USING THE UNIT SAFELY and IMPORTANT NOTES. Additionally this manual should be saved and kept on hand as a convenient reference.

Before you begin assembling the stand, check that all the parts were supplied.

1

2

3

A BC

Owners Manual

Make sure that another person is on hand to help with the assembly and setup. Be very careful, when you assemble and move the piano, to make sure that you do not drop it on your

hands or feet. Prepare an area in which you can perform the assembly safely. Do not use a power tool (e.g., an electric screwdriver) to assemble the stand. You risk damaging or

stripping the screws. The KSC-68 is designed specifically to be used with the F-20.

Assembly Procedure

Parts Check

* You will also need to have a Phillips screwdriver.

* Fasten each screw tightly, then place the stand in a stable and horizontal place.

* Do not allow the pedal cord or power cord to get twisted or pinched while assembling the stand.

* In the interest of product improvement, the specifications and/or appearance of this stand are subject to change without prior notice.

1 StandAssembly

At first, assemble the entire stand in a temporary fashion, without really tightening the screws. Then, after checking the overall alignment of the boards (and gently shifting certain parts where necessary), go around and tightly fasten each of the screws.

1. Attach the side board (left) for the left sides to the center board (so that the metal parts face inside) using screws a (M5 x 20 mm).

2. Use screws a (M5 x 20 mm) to attach the side board (right) in the same way.

12

Center board Side board (left)

Side board (right)

Position the metal parts of the center board so that they face the rear.

Screw a (x 6)

Front

Rear

2 InstallingthePianoontheStand

1. Set the piano on the stand, then firmly attach the four screws a (M5 x 20 mm).

* When handling the piano, firmly grasp it. Be careful, so you do not get your fingers pinched.

Screw a (x 4)

Side board

Underneath the Piano

Please dont get your fingers pinched!

Fasten the screws so that the stand does not protrude outward.

3 AttachingtheHeadphoneHook

1. Attach the headphone hook using screws b (M4 x 16 mm).

Screw b (x 2)

Headphone hook

Keyboard stand for F-20 KSC-68

A Side board (left) 1 pcs.

B Side board (right) 1 pcs.

C Center board 1 pcs.

1 Screw a (M5 x 20 mm) 10 pcs.

2 Headphone hook 1 pcs.

3 Screw b (M4 x 16 mm) 2 pcs.

* 5 1 0 0 0 3 6 1 4 0 - 0 1 *

IMPORTANT NOTES

Copyright 2013 ROLAND CORPORATION

All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. Roland is a registered trademark of Roland Corporation in the United States and/or other countries.

USING THE UNIT SAFELY D

eutsch Franais

Italiano Espaol

Portugus N

ederlands English

Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly.

* Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings, as well to domestic animals or pets.

Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.

The symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the power-cord plug must be unplugged from the outlet.

The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled.

About WARNING and CAUTION Notices About the Symbols

ALWAYS OBSERVE THE FOLLOWING

Do not disassemble or modify by yourself Do not carry out anything unless you are instructed to do so in the owners manual. Otherwise, you risk causing malfunction.

Do not repair or replace parts by yourself Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the Information.

Do not use or store in the following types of locations Subject to temperature

extremes (e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are

Damp (e.g., baths, washrooms, on wet floors); or are

Exposed to steam or smoke; or are

Subject to salt exposure; or are

Exposed to rain; or are

Dusty or sandy; or are

Subject to high levels of vibration and shakiness.

Do not place in an unstable location Otherwise, you risk injury as the result of the stand toppling over or dropping down.

Be cautious to protect children from injury Always make sure that an adult is on hand to provide supervision and guidance when using the stand in places where children are present, or when a child will be using the stand.

Do not drop or subject to strong impact Otherwise, you risk causing damage or malfunction.

CAUTION

Use the stand only for the specified products This stand is designed specifically to be used with the Roland F-20. If used in combination with other products, you risk sustaining injuries as the result of the product dropping down or toppling over due to a lack of stability.

Evaluate safety issues before using stands Even if you observe the cautions given in the owners manual, certain types of handling may allow F-20 to fall from the stand, or cause the stand to overturn. Please be mindful of any safety issues before using this product.

Avoid climbing on top of the stand, or placing heavy objects on it Otherwise, you risk injury as the result of the stand toppling over or dropping down.

Keep small items out of the reach of children To prevent accidental ingestion of the parts listed below, always keep them out of the reach of small children.

Removable Parts Screw

WARNING

WARNING This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.

For C.A. US (Proposition 65)

WARNING

Placement

Do not expose the stand to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Also, do not allow lighting devices that normally are used while their light source is very close to the stand (such as a piano light), or powerful spotlights to shine upon the same area of the stand for extended periods of time. Excessive heat can deform or discolor the stand.

Do not allow rubber, vinyl, or similar materi- als to remain on this stand long periods of time. Such objects can deform or discolor the stand.

Do not paste stickers, decals, or the like to this stand. Peeling such matter off the instrument may damage the exterior finish.

Depending on the material and temperature of the surface on which you place the stand, its rubber feet may discolor or mar the surface. You can place a piece of felt or cloth under the rubber feet to prevent this from happen- ing. If you do so, please make sure that the stand will not slip or move accidentally.

Maintenance

To clean the stand, use a dry, soft cloth; or one that is slightly dampened. Try to wipe the entire surface using an equal amount of strength, moving the cloth along with the grain of the wood. Rubbing too hard in the same area can damage the finish.

Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.

As with any wood-crafted product, some expansion and contraction of the wood can occur depending on the way the stand is used and the environment in which it is used. Over time, this can cause some of the screws to start coming loose. To ensure safe, worry-free use of the stand, you should periodically check the tightness of the screws shown in the illustrations in the Assembly Procedure. If you find any that are loose, use a screwdriver to tighten them.

D eu

ts ch

Fr an

a is

Ita lia

no Es

pa o

l Po

rt ug

u s

N ed

er la

nd s

En gl

is h

11

Lesen Sie zuerst die Abschnitte SICHERHEITSHINWEISE und WICHTIGE HINWEISE. Bewahren Sie die Anleitung auf und verwenden Sie diese als Referenz.

Bevor Sie mit dem Aufbau beginnen, berprfen Sie, ob alle Teile mitgeliefert wurden.

1

2

3

A BC

Bedienungsanleitung

Der Stnder sollte von zwei Personen aufgebaut werden. Seien Sie vorsichtig, wenn Sie das Instrument aufbauen und bewegen, damit es nicht auf Ihre Hnde oder

Fe fllt. Bereiten Sie einen Bereich vor, in dem Sie den Stnder mit gengend Platz und sicher aufbauen knnen. Verwenden Sie kein elektronisches Werkzeug wie z.B. einen Akkuschrauber; Sie knnten damit den

Stnder beschdigen oder die Schrauben berdrehen. Der KSC-68-Stnder ist speziell fr das F-20 entwickelt worden.

Montageanleitung

berprfen der Einzelteile

* Sie bentigen zustzlich einen Kreuzschlitz-Schraubendreher.

* Ziehen Sie jede Schraube fest an. Stellen Sie den Stnder auf einen festen und ebenerdigen Untergrund.

* Achten Sie beim Aufbau darauf, keines der Kabel zu verdrehen oder einzuklemmen.

* nderungen der technischen Daten und des Designs sind mglich. Fr Druckfehler wird keine Haftung bernommen.

1 Aufbauen des Stnders

Bauen Sie den Stnder zunchst nur lose zusammen, ohne die Schrauben ganz fest zu drehen. Nachdem Sie die korrekte Ausrichtung aller Teile berprft und ggf. korrigiert haben, ziehen Sie jede Schraube fest an.

1. Befestigen Sie das linke Seitenteil am Mittelteil, so dass die Metallteile nach innen zeigen. Verwenden Sie die Schrauben a (M5 x 20 mm).

2. Befestigen Sie das rechte Seitenteil auf die gleiche Weise.

12

Mittelteil Seitenteil (links)

Seitenteil (rechts)

Die Metallteile mssen nach hinten zeigen.

Schraube a (x 6)

Vorderseite

Rckseite

2 Aufstellen des Pianos auf den Stnder

1. Stellen Sie das Piano auf den Stnder, und befestigen Sie es mit den vier Schrauben a (M5 x 20 mm).

* Halten Sie das Piano dabei gut fest. Klemmen Sie sich nicht die Finger!

Schraube a (x 4)

Seitenteil

Unterseite des Pianos

Klemmen Sie sich nicht die Finger!

Achten Sie darauf, dass der Stnder nicht an den Seiten bersteht.

3 Befestigen der Kopfhrer-Halterung

1. Befestigen Sie die Halterung fr den Kopfhrer mit den Schrauben b (M4 x 16 mm).

Schraube b (x 2)

Kopfhrer-Halterung

Stnder fr F-20 KSC-68

A Seitenteil (links) 1 x

B Seitenteil (rechts) 1 x

C Mittelteil 1 x

1 Schraube a (M5 x 20 mm) 10 x

2 Halterung fr Kopfhrer 1 x

3 Schraube b (M4 x 16 mm) 2 x

* 5 1 0 0 0 3 6 1 4 0 - 0 1 *

WICHTIGE HINWEISE

Copyright 2013 ROLAND CORPORATION

Alle Rechte vorbehalten. Vervielfltigung, als Print oder Datei, als Ganzes oder in Teilen, bedarf einer schriftlichen Genehmigung der ROLAND CORPORATION.

Roland ist ein eingetragenes Warenzeichen der Roland Corporation in den USA und/oder anderen Lndern.

SICHERER BETRIEB DES GERTS D

eutsch Franais

Italiano Espaol

Portugus N

ederlands English

ber die Hinweise WARNUNG und ACHTUNG

Das Symbol weist den Anwender auf Vorgnge hin, die niemals ausgefhrt werden drfen (verboten sind). Welcher Vorgang genau nicht ausgefhrt werden soll, ist an der Abbildung innerhalb des Kreises zu erkennen. Im Falle des links abgebildeten Symbols bedeutet es hier, dass das Gert niemals auseinander genommen werden darf.

ber die Symbole

ANWEISUNGEN ZUR VERMEIDUNG VON FEUER, ELEKTRISCHEM SCHLAG ODER PERSONENSCHDEN

Wird fr Anweisungen verwendet, die den Anwender vor Lebensgefahr oder der Mglichkeit schwerer Verletzungen bei falscher Anwendung des Gerts warnen sollen.

WARNUNG

Wird fr Anweisungen verwendet, die den Anwender vor Verletzungsgefahr oder der Mglichkeit von Sachbeschdigung bei falscher Anwendung des Gertes warnen sollen. * Als Sachbeschdigung werden Schden

oder andere unerwnschte Auswirkungen bezeichnet, die sich auf Haus/Wohnung und die darin enthaltene Einrichtung sowie Nutz- oder Haustiere beziehen.

ACHTUNG

Das Symbol weist den Anwender auf wichtige Anweisungen oder Warnungen hin. Die genaue Bedeutung des Symbols ist an der Abbildung innerhalb des Dreiecks zu erkennen. Im Falle des links abgebildeten Symbols sind dies allgemeine Vorsichtsma- nahmen, Warnungen oder Gefahrenhinweise.

Das Symbol weist den Anwender auf Vorgnge hin, die ausgefhrt werden mssen. Welcher Vorgang genau ausgefhrt werden soll, ist an der Abbildung innerhalb des Kreises zu erkennen. Im Falle des links abgebildeten Symbols bedeutet es hier, dass das Netzkabel aus der Steckdose gezogen werden muss.

BEACHTEN SIE IMMER FOLGENDES

Gert und Netzadapter nicht modifizieren Das Instrument bzw. der Netzadapter drfen nicht geffnet oder in irgendeiner Weise verndert werden.

Reparaturen nicht selbst ausfhren Nehmen Sie keine eigenen Reparaturversuche vor. berlassen Sie dieses einem qualifizierten Techniker Ihres Roland Service- Centers (siehe Liste der Roland- Vertretungen am Ende dieser Anleitung)

Unvertrgliche Umgebungen vermeiden

Vermeiden Sie Umgebungen mit:

extremen Temperaturen (z.B. direkte Sonneneinstrahlung, direkte Nhe zu einem Heizkrper usw.)

Feuchtigkeit bzw. zu hoher Luftfeuchtigkeit, Regen

Staub, Rauchentwicklung

Luft mit zu hohem Salzgehalt

Vibration.

Keine instabilen Flchen Sorgen Sie dafr, dass das Gert bzw. der Stnder auf einer ebenen, stabilen Unterlage aufgestellt wird, auf der es nicht wackeln kann.

Aufsichtspflicht von Erwachsenen In Haushalten mit Kindern sollte ein Erwachsener solange fr Aufsicht sorgen, bis das betreffende Kind das Instrument unter Beachtung aller Sicherheitsvorschriften zu bedienen wei.

Beschdigungen vermeiden Bewahren Sie das Instrument vor heftigen Sten, und lassen Sie es nicht fallen.

VORSICHT

Den Stnder nur mit diesem Gert verwenden Dieser Stnder wurde speziell fr das Roland F-20 hergestellt. Verwenden Sie diesen Stnder nicht mit anderen Instrumenten, ansonsten besteht das Risiko von Instabililtt und ggf. Beschdigungen.

Sicherheitshinweise fr die Verwendung von Stndern Auch bei Beachtung aller in der Bedienungsanleitung be- schriebenen Vorsichtsmanahmen kann es unter besonderen Umstn- den zum Herunterfallen des Gertes vom Stnder bzw. zu einem Umkippen des Stnders kommen. Prfen Sie selber Fragen der Sicherheit, bevor Sie dieses Produkt verwenden.

Den Stnder nicht belasten Steigen Sie niemals auf den Stnder, und stellen Sie keine schweren Gegenstnde darauf ab.

Kleine Gegenstnde auerhalb der Reichweite von Kindern aufbewahren Bewahren Sie kleine Gegenstnde immer auerhalb der Reichweite von Kindern auf, damit diese Gegen- stnde nicht versehentlich ver- schluckt werden.

bei diesem Stnder: Schrauben

WARNUNG

WARNING This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.

For C.A. US (Proposition 65)

WARNUNG

Positionierung

Setzen Sie den Stnder keinen extremen Temperaturen aus (z.B. Sonneneinstrahlung, Heizkrper, Piano-Lampe). Die Oberflche kann dadurch beschdigt werden. Dieses kann ebenfalls passieren, wenn der Stnder direkt mit einer starken Lichtquelle (z.B. Lichtspot) angestrahlt wird.

Lassen Sie keine Gegenstnde aus Gummi oder hnlichem Material lnger auf dem Stnder liegen, da ansonsten die Oberflche verfrben kann.

Befestigen Sie keine Aufkleber am Stnder, da bei Abziehen des Aufklebers Rckstnde eventuell nicht mehr zu entfernen sind bzw. die Oberflche des Stnders beschdigt wird.

Dieser Stnder besitzt Gummife. Da diese die Oberflche z.B. eines Bodens verfrben knnen, legen Sie unter die Gummife ein Tuch o... Achten Sie aber gleichzeitig darauf, dass der Stnder nicht verrutschen kann.

Reinigung

Verwenden Sie ein trockenes oder feuchtes, weiches Tuch. Verwenden Sie klares Wasser oder ein mildes neutrales Reinigungsmittel, und trocknen Sie die Oberflche immer grndlich mit einem weichen Tuch. Wischen Sie immer mit der Maserung der Oberflche. Drcken Sie das Tuch nicht zu fest an.

Verwenden Sie keinesfalls Benzin, Verdn- nung, Alkohol oder hnliche Mittel, da die Oberflache verfrbt oder beschdigt werden kann.

Da der Stnder aus dem Naturprodukt Holz besteht, welches arbeitet, knnen sich im Laufe der Zeit z.B. die Schrauben selbstndig lockern. berprfen Sie daher regelmig die Festigkeit der Schrauben.

D eu

ts ch

Fr an

a is

Ita lia

no Es

pa o

l Po

rt ug

u s

N ed

er la

nd s

En gl

is h

22

Avant dutiliser le support, veuillez lire attentivement les sections intitules  CONSIGNES DE SCURIT et  REMARQUES IMPORTANTES . Vous devez en outre conserver ce manuel porte de main afin de pouvoir vous y reporter si besoin.

Avant de dmarrer lassemblage du support, vrifiez que vous tes bien en possession de toutes les pices.

1

2

3

A BC

Mode demploi

Assurez-vous quune autre personne est prsente pour vous aider lors de lassemblage et de la configuration. Lorsque vous assemblez et dplacez le piano, soyez trs prudent et veillez ne pas le faire tomber sur vos

mains ou vos pieds. Prparez un endroit qui vous permettra de procder lassemblage en toute scurit. Nutilisez pas doutils lectriques (par exemple un tournevis lectrique) pour assembler le support.

Vous risquez dendommager ou de rayer les vis. Le KSC-68 est conu spcialement pour tre utilis avec le F-20.

Procdure dassemblage

Vrification des pices

* Il vous faudra galement un tournevis Phillips.

* Resserrez bien chaque vis, puis placez le support sur une surface stable et plane.

* Veillez ce que le cordon de la pdale ou le cordon dalimentation ne soit pas tordu ou coinc lors de lassemblage du support.

* Dans lintrt de lamlioration du produit, les caractristiques, laspect et/ou le contenu de ce support sont sujets des modifications sans pravis.

1 Assemblagedusupport

Pour commencer, montez lintgralit du support de faon provisoire, sans serrer les vis fond. Ensuite, aprs avoir vrifi lalignement gnral des panneaux (et avoir ajust certaines pices avec prcaution, le cas chant), faites le tour du support et serrez solidement toutes les vis.

1. Fixez le panneau latral (gauche) des cts gauches au panneau central (de sorte que les parties mtalliques soient orientes vers lintrieur) en utilisant des vis  a  (M5 x 20 mm).

2. Utilisez des vis  a  (M5 x 20 mm) pour fixer le panneau latral (droit) de la mme manire.

12

Panneau central Panneau latral (gauche)

Panneau latral (droite)

Positionnez les parties mtalliques du panneau central de manire ce quelles soient orientes vers larrire.

Vis  a  (x 6)

Avant

Arrire

2 Installationdupianosurlesupport

1. Installez le piano sur le support et fixez fermement les quatre vis  a  (M5 x 20 mm).

* Lorsque vous manipulez le piano, saisissez-le fermement. Faites attention ne pas vous coincer les doigts.

Vis  a  (x 4)

Panneau latral

Sous le piano

Veillez ne pas vous coincer les doigts.

Resserrez les vis de manire ce que le support ne dpasse pas.

3 Fixationducrochetpourcasque

1. Fixez le crochet pour casque laide de vis  b  (M4 x 16 mm).

Vis  b  (x 2)

Crochet pour casque

Support clavier pour F-20 KSC-68

A Panneau latral (gauche) 1 pice

B Panneau latral (droite) 1 pice

C Panneau central 1 pice

1 Vis  a  (M5 x 20 mm) 10 pices

2 Crochet pour casque 1 pice

3 Vis  b  (M4 x 16 mm) 2 pices

* 5 1 0 0 0 3 6 1 4 0 - 0 1 *

REMARQUES IMPORTANTES

Copyright 2013 ROLAND CORPORATION

Tous droits rservs. La reproduction intgrale ou partielle de cette publication est interdite sous quelque forme que ce soit sans lautorisation crite de ROLAND CORPORATION. Roland est une marque dpose ou une marque commerciale de Roland Corporation aux tats-Unis et/ou dans dautres pays.

CONSIGNES DE SCURIT D

eutsch Franais

Italiano Espaol

Portugus N

ederlands English

Utilis pour les instructions destines prvenir les utilisateurs dun risque de blessure ou de dommages matriels en cas dutilisation incorrecte de lappareil. * Les dommages matriels font rfrence aux dommages ou autres consquences prjudiciables relatifs au domicile et son ameublement, ainsi quaux animaux de compagnie.

Utilis pour les instructions destines prvenir les utilisateurs dun danger de mort ou dun risque de blessure grave en cas dutilisation incorrecte de lappareil.

Le symbole attire lattention des utilisateurs sur des actions obligatoires. Laction spcifique effectuer est indique par limage reprsente dans le cercle. Le symbole prsent gauche indique que le cordon dalimentation doit tre dbranch de la prise.

Le symbole attire lattention des utilisateurs sur des instructions ou des avertissements importants. La signification de chaque symbole est dtermine par limage reprsente dans le triangle. Le symbole prsent gauche est utilis pour des prcautions, des avertissements ou des alertes caractre gnral signalant des dangers.

Le symbole attire lattention des utilisateurs sur des manipulations interdites. La manipulation interdite est indique par limage reprsente dans le cercle. Le symbole prsent gauche indique une interdiction de dmonter lappareil.

propos des messages de type AVERTISSEMENT et ATTENTION propos des symboles

VEUILLEZ TOUJOURS RESPECTER LES CONSIGNES SUIVANTES

CONSIGNE D SCURIT

AVERTISSEMENT

ATTENTION

CONSIGNES RESPECTER POUR VITER TOUT RISQUE DLECTROCUTION, DINCENDIE ET DE BLESSURE

Neffectuez aucun dsassemblage ou aucune modification vous-mme Neffectuez aucune opration autre que celle dcrite dans le mode demploi Vous risquez sinon de provoquer un dysfonctionnement.

Ne rparez et ne remplacez aucune pice vous-mme Pour toute opration dentretien, prenez contact avec votre revendeur, avec le centre de maintenance Roland le plus proche, ou avec un distributeur Roland agr (voir la page Information).

Nutilisez pas le support et ne le rangez pas dans les types demplacement suivants exposs des tempratures

extrmes (par exemple, exposition directe la lumire du soleil dans un vhicule ferm, prs dun conduit de chauffage, ou sur un quipement produisant de la chaleur) ;

embus (par exemple, salle de bains, cabinet de toilettes, sol mouill) ;

exposs la vapeur ou la fume ; exposs au sel ; exposs la pluie ; poussireux ou sableux ; soumis de fortes vibrations et secousses.

Ne linstallez pas sur une surface instable Vous risquez sinon de vous blesser si le support bascule ou chute.

Veillez ce que les enfants ne se blessent pas Veillez ce quun adulte assure toujours une surveillance et un accompagnement lorsque le support est utilis en prsence denfants ou par un enfant.

Ne laissez pas tomber le support et ne le soumettez pas de forts impacts Vous risquez sinon de provoquer des dommages ou un dysfonctionnement.

ATTENTION

Utilisez le support uniquement pour les produits spcifis Ce support est conu spcifiquement pour une utilisation avec le modle Roland F-20. Sil est utilis en association avec dautres produits, vous risquez de vous blesser si le produit chute ou bascule en raison dun manque de stabilit.

valuez les risques de scurit avant dutiliser les supports Mme si vous tenez compte des avertissements mentionns dans le mode demploi, il peut arriver que le F-20 tombe du support ou que le support bascule suite certaines manipulations. Prenez en considration tous les risques de scurit avant dutiliser ce produit.

vitez de grimper sur le dessus du support ou de placer des objets lourds dessus Vous risquez de vous blesser si le support bascule ou chute.

Tenez les pices de petite taille hors de porte des enfants en bas ge Pour viter tout ingestion accidentelle des pices indiques ci-dessous, tenez-les toujours hors de porte des enfants en bas ge.

Pices amovibles Vis

AVERTISSEMENT

WARNING This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.

For C.A. US (Proposition 65)

AVERTISSEMENT

Installation

Nexposez pas le support la lumire directe du soleil, ne le placez pas proximit dappareils produisant de la chaleur, ne le laissez pas lintrieur dun vhicule ferm, et ne le soumettez pas de quelque manire que ce soit des tempratures extrmes. Par ailleurs, vitez de laisser des luminaires utiliss normalement proximit immdiate du support (comme une lampe de piano), ou des projecteurs puissants illuminer la mme zone du support pendant une priode prolonge. Une chaleur excessive peut dformer ou dcolorer le support.

vitez de dposer du caoutchouc, du vinyle ou des matriaux similaires sur le support pour une priode prolonge. Une chaleur excessive peut dformer ou dcolorer le support.

Ne collez pas dautocollants, de dcalcomanies ou dautres objets similaires sur ce support. Vous risqueriez dendommager la finition de linstrument en les dcollant.

Suivant le matriau et la temprature de la surface sur laquelle vous placez le support, il est possible que ses pieds en caoutchouc dcolorent ou dtriorent la surface. Pour viter cela, vous pouvez disposer un bout de feutre ou de chiffon sous les pieds en caoutchouc. Ce faisant, assurez-vous que le support ne risque pas de glisser ou dtre dplac accidentellement.

Entretien

Pour nettoyer le support, utilisez un chiffon doux et sec, ou un chiffon lgrement imbib deau. Les parties en bois doivent tre nettoyes dans le sens du grain en appliquant une pression gale sur lensemble de la surface. Un frottement excessif un mme endroit peut endommager la finition.

Nutilisez jamais de benzine, de diluant, dalcool ou de solvants de quelque sorte que ce soit, afin dviter tout risque de dcoloration et/ou de dformation.

Comme pour tout produit fabriqu en bois, une certaine expansion ou contraction du bois peut se produire selon les conditions et lenvironnement dutilisation du support. terme, ces phnomnes peuvent entraner un desserrement de certaines vis. Pour une utilisation du support en toute scurit, veillez vrifier rgulirement que les vis sont bien serres comme indiqu dans les illustrations de la section  Procdure dassemblage . Si vous constatez que des vis sont desserres, resserrez-les laide dun tournevis.

D eu

ts ch

Fr an

a is

Ita lia

no Es

pa o

l Po

rt ug

u s

N ed

er la

nd s

En gl

is h

3 3

Prima di usare questo supporto, leggere attentamente le sezioni "UTILIZZO SICURO DELL'UNIT" e "NOTE IMPORTANTI". Conservare il manuale e tenerlo a portata di mano per usarlo come riferimento.

Prima di iniziare a montare il supporto, controllare tutte le parti in dotazione.

1

2

3

A BC

Manuale dell'utente

Farsi aiutare da un'altra persona per il montaggio e il collocamento del supporto. Quando si monta e si sposta il pianoforte, fare attenzione a non farlo cadere sui piedi o sulle mani. Preparare la zona in cui eseguire la procedura di montaggio. Non utilizzare un cacciavite elettrico o utensili simili per montare il supporto. Le viti potrebbero

danneggiarsi o perdere la filettatura. Il supporto KSC-68 progettato specificatamente per essere utilizzato con l'unit F-20.

Procedura di montaggio

Controllo delle parti

* necessario disporre di un cacciavite a stella.

* Avvitare saldamente tutte le viti, quindi collocare il supporto su una superficie stabile e piana.

* Evitare che il cavo del pedale o di alimentazione si attorcigli o si schiacci durante il montaggio del supporto.

* Per garantire un costante miglioramento dei nostri prodotti, le specifiche tecniche e/o l'aspetto del supporto sono soggetti a variazioni senza ulteriore preavviso.

1 Montaggiodelsupporto

Per prima cosa, accostare tutte le parti senza avvitare realmente le viti. Quindi, dopo aver verificato il corretto allineamento dei pannelli (e aver attentamente spostato alcune parti, ove necessario), avvitare tutte le viti.

1. Collegare il pannello laterale (sinistro) al pannello centrale (con le parti metalliche rivolte verso l'interno) usando le viti "a" (M5 x 20 mm).

2. Usare le viti "a" (M5 x 20 mm) per collegare il pannello laterale (destro) nello stesso modo.

12

Pannello centrale Pannello laterale (sinistro)

Pannello laterale (destro)

Posizionare le parti metalliche del pannello centrale in modo che siano rivolte verso il retro.

Vite "a" (x 6)

Frontale

Retro

2 Posizionamentodelpianofortesulsupporto

1. Posizionare il pianoforte sul supporto, quindi stringere saldamente le quattro viti "a" (M5 x 20 mm).

* Tenere saldamente il piano quando viene maneggiato. Fare attenzione a non schiacciarsi le dita.

Vite "a" (x 4)

Pannello laterale

Sotto il pianoforte

Fare attenzione a non schiacciarsi le dita.

Stringere le viti in modo che il supporto non sporga verso l'esterno.

3 Fissaggiodelganciodellecuffie

1. Fissare il gancio delle cuffie usando le viti "b" (M4 x 16 mm).

Vite "b" (x 2)

Gancio delle cuffie

Supporto per tastiera per F-20 KSC-68

A Pannello laterale (sinistra) 1 pezzo

B Pannello laterale (destra) 1 pezzo

C Pannello centrale 1 pezzo

1 Vite "a" (M5 x 20 mm) 10 pezzi

2 Gancio delle cuffie 1 pezzo

3 Vite "b" (M4 x 16 mm) 2 pezzi

* 5 1 0 0 0 3 6 1 4 0 - 0 1 *

NOTE IMPORTANTI

Copyright 2013 ROLAND CORPORATION

Tutti i diritti riservati. Nessuna parte di questa pubblicazione pu essere riprodotta, in alcuna forma, senza autorizzazione scritta di ROLAND CORPORATION. Roland un marchio registrato di Roland Corporation negli Stati Uniti d'America e/o in altri paesi.

UTILIZZO SICURO DELL'UNIT D

eutsch Franais

Italiano Espaol

Portugus N

ederlands English

Utilizzato per istruzioni intese ad avvisare l'utente del rischio di lesioni o danni materiali in caso di utilizzo improprio dell'unit.

* L'espressione "danno materiale" si riferisce a danni o altri effetti avversi causati all'ambiente circostante e ai mobili, nonch ad animali domestici.

Utilizzato per istruzioni intese ad avvisare l'utente del rischio di morte o lesioni gravi in caso di utilizzo improprio dell'unit.

Il simbolo richiama l'attenzione dell'utente su azioni che devono essere eseguite. L'azione specifica da eseguire indicata dall'immagine contenuta nel cerchio. Il simbolo a sinistra indica che la spina del cavo di alimentazione deve essere staccata dalla presa.

Il simbolo richiama l'attenzione dell'utente su istruzioni o avvisi importanti. Il significato specifico del simbolo dall'immagine contenuta nel triangolo. Il simbolo a sinistra utilizzato per avvertenze o avvisi di presenza di pericolo.

Il simbolo richiama l'attenzione dell'utente su azioni che non devono mai essere eseguite (sono proibite). L'azione specifica vietata indicata dall'immagine contenuta nel cerchio. Il simbolo a sinistra indica che l'unit non deve mai essere smontata.

Informazioni sulle note AVVISO e ATTENZIONE Informazioni sui simboli

OSSERVARE SEMPRE QUANTO SEGUE

UTILIZZO SICURO D L'UNIT ISTRUZIONI PER LA PREVENZIONE DI INCENDI, SCOSSE ELETTRICHE O LESIONI PERSONALI

AVVISO

ATTENZIONE

Non tentare di smontare o modificare il supporto Non eseguire alcuna operazione a meno che non sia espressamente specificata nel Manuale dell'utente. In caso contrario, si rischia di provocare guasti.

Non tentare di riparare o sostituire le parti Per qualsiasi tipo di assistenza, rivolgersi al proprio rivenditore, al Roland Service Center pi vicino o a un distributore Roland autorizzato, come indicato nella pagina delle informazioni.

Evitare di utilizzare o conservare il supporto nelle seguenti condizioni In ambienti soggetti a

temperature eccessive (ad esempio, la luce solare diretta in un veicolo chiuso, vicino a una fonte di calore, su apparecchiature che generano calore);

In luoghi umidi (ad esempio, bagni, lavanderie, pavimenti bagnati);

All'esposizione di vapore o fumo;

In luoghi soggetti a esposizione salina;

All'esposizione della pioggia;

In ambienti polverosi o sabbiosi;

Su superfici soggette a livelli elevati di vibrazione e tremolio.

Non collocare su superfici instabili La mancanza di stabilit potrebbe causare la caduta o il rovesciamento del supporto, causando infortuni alle persone.

Proteggere i bambini da possibili lesioni personali In presenza di bambini o in caso di utilizzo del supporto da parte dei bambini, necessaria la supervisione di un adulto.

Non far cadere il supporto o sottoporlo a forti impatti In caso contrario, si rischia di provocare danni o guasti.

ATTENZIONE

Utilizzare solo il supporto solo per i prodotti specificati Il supporto progettato specificatamente per essere utilizzato con l'unit F-20. Se utilizzato con altri prodotti, la mancanza di stabilit potrebbe far cadere o far rovesciare il supporto, causando infortuni alle persone.

Valutare tutti gli aspetti relativi alla sicurezza prima di utilizzare un supporto Anche rispettando tutte le avvertenze fornite nel Manuale dell'utente, alcuni movimenti potrebbero far cadere l'unit F-20 dal supporto o far rovesciare quest'ultimo. Tenere a mente tutte le avvertenze sulla sicurezza prima di utilizzare il prodotto.

Evitare di salire o collocare oggetti pesanti sul supporto La mancanza di stabilit potrebbe causare la caduta o il rovesciamento del supporto, causando infortuni alle persone.

Tenere lontano dalla portata dei bambini le parti di piccole dimensioni Tenere sempre lontano dalla portata dei bambini le parti elencate di seguito per evitare che vengano ingerite accidentalmente.

Parti rimovibili Viti

AVVISO

WARNING This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.

For C.A. US (Proposition 65)

AVVISO

Posizionamento

Non esporre il supporto alla luce solare diretta, non posizionarlo in prossimit di dispositivi che irradiano calore, non lasciarlo all'interno di un veicolo chiuso o sottoporlo in altri modi a temperature eccessive. Inoltre, non collocare fonti di illuminazione troppo vicine al supporto (come ad esempio una luce per pianoforte), n utilizzare faretti molto luminosi sulla medesima area del supporto per periodi di tempo prolungati. Il calore eccessivo pu deformare o scolorire il supporto.

Non lasciare gomma, plastica o materiali simili sul supporto per prolungati periodi di tempo. Questi oggetti possono deformare o scolorire il supporto.

Non incollare adesivi, decalcomanie o simili sul supporto. La rimozione di tali elementi potrebbe danneggiare la finitura esterna.

A seconda della temperatura e del materiale sul quale si posiziona il supporto, possibile che i piedini in gomma della tastiera possano scolorire o marcare la superficie di appoggio. Se si desidera impedire ci, porre dei feltrini o un panno sotto i piedini in gomma. In tal caso, assicurarsi che il supporto non scivoli o non si sposti in modo accidentale.

Manutenzione

Per pulire il supporto, utilizzare un panno asciutto e morbido o uno leggermente inumidito. Strofinare l'intera superficie utilizzando possibilmente la stessa forza, muovendo il panno seguendo le nervature del legno. Strofinare troppo la stessa area pu danneggiare la finitura.

Non utilizzare mai benzina, diluenti, alcool o solventi di alcun tipo, per evitare la possibilit di scolorimento e/o deformazione.

Come per qualsiasi prodotto in legno, si potrebbero verificare espansioni o contrazioni del legno a seconda della modalit d'uso del supporto e dell'ambiente in cui viene utilizzato. Nel corso del tempo, ci potrebbe causare l'allentamento di alcune viti. Per garantire un utilizzo sicuro del supporto, controllare periodicamente se le viti indicate nell'immagine della sezione "Procedura di montaggio" sono ben fissate. Se sono allentate, stringerle con un cacciavite.

D eu

ts ch

Fr an

a is

Ita lia

no Es

pa o

l Po

rt ug

u s

N ed

er la

nd s

En gl

is h

44

Antes de usar este soporte, lea con atencin las secciones UTILIZACIN SEGURA DE LA UNIDAD y NOTAS IMPORTANTES. Asimismo, conserve este manual y tngalo a mano para consultarlo como referencia.

Antes de iniciar el montaje del soporte, verifique si tiene todas las piezas necesarias.

1

2

3

A BC

Manual de instrucciones

Asegrese de que haya otra persona disponible para ayudarle con el montaje y la instalacin. Cuando monte y mueva el piano, tenga mucho cuidado de que no se le caiga encima de las manos o los

pies. Prepare una zona en la que pueda llevar a cabo el montaje con seguridad. No use herramientas elctricas (por ejemplo, un destornillador elctrico) para montar el soporte.

Corre el riesgo de daar o estropear los tornillos. El modelo KSC-68 est diseado especficamente para ser utilizado con el F-20.

Procedimiento de montaje

Piezas incluidas

* Tambin necesitar un destornillador Phillips.

* Apriete bien cada uno de los tornillos y luego coloque el soporte en una superficie horizontal estable.

* No deje que el cable del pedal ni el cable de alimentacin estn doblados ni que queden atrapados al montar el soporte.

* Con el fin de mejorar el producto, las especificaciones y/o el acabado de este soporte estn sujetos a cambios sin previo aviso.

1 Montajedelsoporte

En primer lugar, monte el soporte completo de forma provisional, sin apretar los tornillos del todo. A continuacin, tras comprobar la alineacin de los tableros (y ajustando con cuidado las piezas que lo necesiten), empiece a apretar del todo los tornillos.

1. Acople el tablero lateral (izquierdo) del lado izquierdo al tablero central (de forma que las piezas metlicas queden orientadas hacia el interior) con los tornillos a (M5 x 20 mm).

2. Use los tornillos a (M5 x 20 mm) para acoplar el tablero lateral (derecho) del mismo modo.

12

Tablero central Tablero lateral (izquierdo)

Tablero lateral (derecho)

Coloque las piezas metlicas del tablero central de modo que queden orientadas hacia la parte posterior.

Tornillo a (x 6)

Parte delantera

Parte trasera

2 Instalacindelpianosobreelsoporte

1. Coloque el piano sobre el soporte y, seguidamente, apriete bien los cuatro tornillos a (M5 x 20 mm).

* Cuando manipule el piano, sujtelo con firmeza. Tenga cuidado de no pillarse los dedos.

Tornillo a (x 4)

Tablero lateral

Parte de debajo del piano

Procure no pillarse los dedos.

Apriete los tornillos de modo que el soporte no sobresalga.

3 Acoplamientodelganchoparaauriculares

1. Acople el gancho para los auriculares con los tornillos b (M4 x 16 mm).

Tornillo b (x 2)

Gancho para auriculares

Soporte para el teclado F-20 KSC-68

A Tablero lateral (izquierdo) 1 pieza

B Tablero lateral (derecho) 1 pieza

C Tablero central 1 pieza

1 Tornillo a (M5 x 20 mm) 10 piezas

2 Gancho para auriculares 1 pieza

3 Tornillo b (M4 x 16 mm) 2 piezas

* 5 1 0 0 0 3 6 1 4 0 - 0 1 *

NOTAS IMPORTANTES

Copyright 2013 ROLAND CORPORATION

Todos los derechos reservados. Se prohbe la reproduccin de cualquier parte de esta publicacin, en cualquier formato, sin la previa autorizacin por escrito de ROLAND CORPORATION. Roland es una marca comercial registrada de Roland Corporation en los Estados Unidos y/o en otros pases.

UTILIZACIN SEGURA DE LA UNIDAD D

eutsch Franais

Italiano Espaol

Portugus N

ederlands English

Se utiliza para destacar las instrucciones cuyo objeto es advertir al usuario sobre el riesgo de lesiones o daos materiales si la unidad no se utiliza correctamente. * Por daos materiales se entienden

los daos o efectos adversos causados en el hogar y su contenido, as como a los animales domsticos o mascotas.

Se utiliza para destacar las instrucciones cuyo objeto es advertir al usuario sobre el riesgo de lesiones graves o mortales si la unidad no se utiliza correctamente.

El smbolo tiene por objeto advertir al usuario sobre acciones que es necesario realizar. La accin concreta que debe realizarse viene indicada por el dibujo que hay dentro del crculo. En el caso del smbolo de la izquierda, signica que el enchufe del cable de alimentacin debe desenchufarse de la toma de corriente.

El smbolo tiene por objeto advertir al usuario sobre instrucciones o advertencias importantes. El signicado concreto del smbolo viene determinado por el dibujo que hay dentro del tringulo. Por ejemplo, el smbolo de la izquierda se usa para precauciones generales, advertencias o alertas de peligro.

El smbolo tiene por objeto advertir al usuario sobre acciones que nunca deben realizarse (estn prohibidas). La accin concreta que no debe realizarse viene indicada por el dibujo que hay dentro del crculo. En el caso del smbolo de la izquierda, signica que la unidad nunca debe desmontarse.

Acerca de los smbolos

ADVERTENCIA

PRECAUCIN

Acerca de los avisos ADVERTENCIA y PRECAUCIN

INSTRUCCIONES PARA LA PREVENCIN DE INCENDIOS, DESCARGAS ELCTRICAS O LESIONES PERSONALES

TENGA SIEMPRE EN CUENTA LO SIGUIENTE

No desmonte ni modifique usted mismo la unidad No lleve a cabo ninguna operacin a menos que el Manual de instrucciones le indique que lo haga. En caso contrario, corre el riesgo de que se produzca algn fallo de funcionamiento.

No repare ni sustituya las piezas usted mismo Si fuera necesaria algn tipo de reparacin, pngase en contacto con su proveedor, con el centro de servicio Roland ms cercano o con un distribuidor autorizado de Roland; encontrar sus datos en la lista de la pgina Informacin.

No utilice ni guarde la unidad en un lugar con las siguientes caractersticas Lugares expuestos a temperaturas

extremas (por ejemplo, bajo la luz directa del sol en un vehculo cerrado, cerca de un conducto de calefaccin, encima de algn equipo que genere calor, etc.)

Lugares hmedos (por ejemplo, cuartos de bao o suelos mojados)

Lugares expuestos a vapor o a humos

Lugares expuestos a entornos salinos

Lugares expuestos a la lluvia

Lugares polvorientos o arenosos

Lugares expuestos a altos niveles de vibraciones y sacudidas.

No coloque la unidad en un lugar inestable Si lo hace, corre el riesgo de sufrir alguna lesin si el soporte volcara o se cayera.

Tenga precaucin y proteja a los nios de posibles lesiones Asegrese siempre de que haya un adulto cerca para supervisar y vigilar cuando el soporte se vaya a utilizar en un lugar donde haya nios, o cuando es un nio el que est utilizando el soporte.

No caiga ni someta la unidad a impactos fuertes Si lo hace, corre el riesgo de provocarle algn dao o que funcione incorrectamente.

PRECAUCIN

Utilice este soporte nicamente con los productos especificados Este soporte est diseado especficamente para ser utilizado con el modelo Roland F-20. Si se utiliza con otros productos, el soporte podra caerse o volcar por falta de estabilidad, y provocar lesiones.

Evale todos los aspectos de seguridad antes de utilizar los soportes Aunque observe las precauciones recomendadas en el Manual de instrucciones, determinados modos de manejar el producto pueden hacer que el F-20 se caiga del soporte o que este ltimo vuelque. Tenga en cuenta todos los protocolos de seguridad antes de utilizar este producto.

No se suba nunca sobre el soporte ni le coloque objetos pesados encima Si lo hace, corre el riesgo de sufrir alguna lesin si el soporte volcara o se cayera.

Mantenga las piezas pequeas fuera del alcance de los nios Para evitar que los nios puedan tragarse sin querer los siguientes componentes, mantngalos siempre fuera de su alcance.

Piezas extrables Tornillo

ADVERTENCIA

WARNING This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.

For C.A. US (Proposition 65)

ADVERTENCIA

Colocacin

No exponga el soporte a la luz solar directa, no lo coloque cerca de dispositivos que desprendan calor, no lo deje dentro de un vehculo cerrado ni lo someta a temperaturas extremas. Tampoco site cerca del soporte equipos de iluminacin muy potentes, como luces de pianos o focos potentes, ni permita que proyecten su luz sobre el mismo lugar del soporte durante mucho tiempo. El calor excesivo puede deformar o decolorar el soporte.

No deje que materiales como goma, vinilo o similares permanezcan sobre el soporte durante largos periodos de tiempo. Este tipo de materiales puede deformar o decolorar el soporte.

No pegue adhesivos, calcomanas, ni elementos similares a este soporte. Al despegarlos se podra daar el acabado exterior.

Segn el material y la temperatura de la superficie sobre la que coloque el soporte, es posible que los tacos de goma decoloren o estropeen la superficie. Para evitarlo, puede colocar un trozo de fieltro o de tejido debajo de los tacos de goma. Si opta por hacer esto, asegrese de que el soporte no pueda resbalarse ni desplazarse accidentalmente.

Mantenimiento

Para limpiar el soporte, utilice un pao seco y suave, o uno ligeramente humedecido. Limpie toda la superficie aplicando la misma fuerza, y mueva el pao siguiendo las aguas de la madera. Si frota demasiado fuerte en la misma zona puede daar el acabado.

No utilice alcohol o benceno, ni disolventes de ningn tipo para evitar cualquier posible deformacin o decoloracin.

Como sucede con cualquier producto que incluya madera en su diseo, la madera puede hincharse o contraerse un poco en funcin de cmo se utiliza el soporte y su entorno de utilizacin. Con el tiempo, esto puede hacer que los tornillos se aflojen. Para garantizar la utilizacin segura y sin complicaciones del soporte, es recomendable comprobar peridicamente que los tornillos indicados en las ilustraciones del Procedimiento de montaje estn bien apretados. Si nota que estn flojos, apritelos con un destornillador.

D eu

ts ch

Fr an

a is

Ita lia

no Es

pa o

l Po

rt ug

u s

N ed

er la

nd s

En gl

is h

5 5

Antes de usar esse suporte, leia com ateno as sees chamadas USO SEGURO DO EQUIPAMENTO e OBSERVAES IMPORTANTES. Alm disso, o manual dever ser guardado em um local de fcil acesso para consultas futuras.

Antes de comear a montar o suporte, verifique se todas as peas foram fornecidas.

1

2

3

A BC

Manual do Proprietrio

Certifique-se de que outra pessoa esteja disponvel para ajudar com a montagem e instalao. Tenha muito cuidado, ao montar e mover o piano, para certificar-se de no deix-lo cair sobre suas mos

ou ps. Prepare uma rea na qual voc possa realizar a montagem com segurana. No use uma ferramenta eltrica (p.ex., chave de fenda eltrica) para montar o suporte. Voc corre o risco

de danificar ou espanar os parafusos. O KSC-68 projetado especificamente para ser usado com o F-20.

Procedimento de Montagem

Verificao de Peas

* Tambm ser necessrio ter uma chave de fenda Phillips.

* Aperte cada parafuso firmemente e, em seguida, coloque o suporte em um local estvel e horizontal.

* No permita que o cabo do pedal ou de fora seja dobrado ou esmagado durante a montagem do suporte.

* Com a finalidade de aprimorar o produto, as especificaes e/ou a aparncia deste suporte esto sujeitas a alteraes sem aviso prvio.

1 MontagemdoSuporte

Primeiramente, monte toda a estante temporariamente, sem apertar os parafusos. Depois, aps verificar o alinhamento geral das placas (e mexendo suavemente em algumas peas onde for necessrio) aperte com firmeza cada um dos parafusos.

1. Prenda a placa lateral (esquerda) do lado esquerdo placa central (de forma que as peas de metal fiquem para dentro) usando parafusos a (M5 x 20 mm).

2. Use parafusos a (M5 x 20 mm) para prender a placa lateral (direita) da mesma maneira.

12

Placa central Placa lateral (esquerda)

Placa lateral (direita)

Posicione as peas de metal da placa central de forma que elas fiquem na parte traseira.

Parafuso a (x 6)

Frente

Traseira

2 InstalaodoPianonoSuporte

1. Coloque o piano no suporte e depois prenda firmemente os quatro parafusos a (M5 x 20 mm).

* Ao manusear o piano, segure-o com firmeza. Tenha cuidado para no prender seus dedos.

Parafuso a (x 4)

Placa lateral

Abaixo do Piano

Cuidado para no esmagar seus dedos!

Aperte os parafusos para que o suporte no se projete para fora.

3 Fixaodoganchodefonesdeouvido

1. Prenda o gancho de fones de ouvido usando parafusos b (M4 x 16 mm).

Parafuso b (x 2)

Gancho para fones de ouvido

Suporte de teclado para F-20 KSC-68

A Placa lateral (esquerda) 1 pea

B Placa lateral (direita) 1 pea

C Placa central 1 pea

1 Parafuso a (M5 x 20 mm) 10 peas

2 Gancho para fones de ouvido 1 pea

3 Parafuso b (M4 x 16 mm) 2 peas

* 5 1 0 0 0 3 6 1 4 0 - 0 1 *

OBSERVAES IMPORTANTES

Copyright 2013 ROLAND CORPORATION

Todos os direitos reservados. Nenhuma parte desta publicao poder ser reproduzida em qualquer formato sem permisso por escrito da ROLAND CORPORATION. Roland uma marca registrada da Roland Corporation nos Estados Unidos e/ou em outros pases.

USO SEGURO DO EQUIPAMENTO D

eutsch Franais

Italiano Espaol

Portugus N

ederlands English

Ele usado para instrues com o objetivo de alertar o usurio para o risco de ferimento ou dano material se o equipamento for usado inadequadamente.

* Dano material se refere a danos ou efeitos adversos causados residncia e a todos os mveis, assim como a animais domsticos ou bichos de estimao.

Ele usado para instrues com o objetivo de alertar o usurio para o risco de morte ou ferimento grave se o equipamento for usado inadequadamente.

O smbolo alerta o usurio sobre as coisas que devem ser feitas. A coisa especfica que deve ser feita indicada pela figura dentro do crculo. No caso do smbolo esquerda, ele significa que o plugue do cabo de fora tem que ser desligado da tomada.

O smbolo alerta o usurio sobre instrues e avisos importantes. O significado especfico do smbolo determinado pela figura dentro do tringulo. No caso do smbolo esquerda, ele usado para cuidados gerais, avisos ou alertas de perigo.

O smbolo alerta o usurio sobre as coisas que nunca devem ser feitas (proibidas). A coisa especfica que no deve ser feita indicada pela figura dentro do crculo. No caso do smbolo esquerda, ele significa que o equipamento nunca deve ser desmontado.

Sobre alertas de AVISO e CUIDADO Sobre os smbolos

SEMPRE OBSERVE O SEGUINTE

USO SEGURO D UIPAMENTO INSTRUES PARA A PREVENO DE INCNDIOS, CHOQUES ELTRICOS OU FERIMENTOS EM PESSOAS

AVISO

CUIDADO

No desmonte ou faa qualquer modificao por conta prpria No faa nenhum procedimento que no seja instrudo pelo manual do proprietrio. Caso contrrio, h o risco de causar um defeito.

No repare ou substitua peas por conta prpria Para manuteno, entre em contato com o revendedor, o Centro de Servios da Roland ou um distribuidor autorizado da Roland, conforme listado na pgina Informaes.

No use ou armazene nos seguintes tipos de locais Sujeitos a temperaturas

extremas (por exemplo, luz solar direta em veculos fechados, prximo a um duto de aquecimento, em cima de um equipamento que gera calor);

Molhados (por exemplo, banheiros, lavatrios ou pisos molhados);

Expostos ao vapor ou fumaa;

Sujeitos exposio ao sol;

Expostos chuva;

Empoeirados ou com areia;

Sujeitos a altos nveis de vibrao e instabilidade.

No coloque em local instvel Caso contrrio, h o risco de se ferir, caso o produto caia ou tombe

Tenha o cuidado de proteger crianas contra ferimentos Certifique-se sempre de que um adulto esteja disponvel para fornecer superviso e orientao ao usar o suporte em locais onde crianas estejam presentes, ou quando uma criana esteja usando o suporte.

No derrube ou submeta a impactos fortes Caso contrrio, h o risco de causar dano ou defeito.

CUIDADO

Use o suporte apenas para os produtos especificados Este suporte projetado especificamente para ser usado com o Roland F-20. Ao us-lo com outros produtos, voc correr o risco de se ferir se o produto cair ou tombar por falta de estabilidade.

Avalie a segurana antes de usar suportes Mesmo se voc observar os avisos do manual do proprietrio, certas formas de manuseio podem fazer o F-20 cair do suporte ou o suporte virar. Fique atento a qualquer problema de segurana antes de usar o produto.

Evite pisar no suporte ou colocar objetos pesados sobre ele Caso contrrio, h o risco de se ferir, caso o produto caia ou tombe.

Mantenha as peas pequenas fora do alcance de crianas Para evitar ingesto acidental das peas listadas abaixo, sempre mantenha as mesmas fora do alcance de crianas pequenas.

Peas removveis Parafuso

AVISO

WARNING This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.

For C.A. US (Proposition 65)

AVISO

Posicionamento

No exponha o suporte luz solar direta, coloque-o perto de dispositivos que irradiam calor, deixe-o dentro de um veculo fechado ou sujeite-o a temperaturas extremas em geral. Alm disso, no permita que dispositivos luminosos que normalmente so usados tendo a sua fonte de luz muito prxima do suporte (como uma luminria para pianos) ou holofotes poderosos sejam direcionados para a rea onde est o suporte por perodos prolongados. O calor excessivo pode deformar ou descolorir o suporte.

No deixe que borracha, vinil ou materiais similares permaneam sobre este suporte por perodos prolongados. Tais objetos podem deformar ou descolorir o suporte.

No cole adesivos, decalques ou similares neste suporte. A remoo de tais materiais do instrumento pode danificar o acabamento exterior.

Dependendo do material e da temperatura da superfcie sobre a qual voc colocar o suporte, os ps de borracha podero perder a cor ou marcar a superfcie. Voc pode colocar um pedao de feltro ou pano sob os ps de borracha para evitar que isso acontea. Se fizer isso, certifique-se de que o suporte no possa deslizar ou se mover acidentalmente.

Manuteno

Para limpar o suporte, utilize um pano seco e macio, ou levemente umedecido. Tente limpar toda a superfcie usando uma quantidade igual de fora, movendo o pano na direo da madeira. Esfregar a mesma rea com muita fora pode danificar o acabamento.

Nunca use benzina, diluentes, lcool ou solventes de nenhum tipo, para evitar descolorao e/ou deformao.

Como com qualquer produto feito em madeira, pode ocorrer alguma expanso ou contrao da madeira dependendo da maneira que o suporte usado e o ambiente no qual ele usado. Ao longo do tempo, isso pode fazer com que alguns parafusos comecem a ficar frouxos. Para garantir um uso seguro e sem preocupaes do suporte, voc dever periodicamente verificar se os parafusos mostrados nas ilustraes em Procedimento de Montagem esto firmes. Se encontrar algum frouxo, use uma chave de venda para apert-lo.

D eu

ts ch

Fr an

a is

Ita lia

no Es

pa o

l Po

rt ug

u s

N ed

er la

nd s

En gl

is h

66

Lees zorgvuldig de hoofdstukken HET APPARAAT VEILIG GEBRUIKEN en BELANGRIJKE OPMERKINGEN voordat u de standaard gaat gebruiken. Deze handleiding moet bovendien als handige referentie worden bewaard en voorhanden zijn.

Controleer of alle onderdelen werden meegeleverd voordat u de standaard begint te monteren.

1

2

3

A BC

Gebruikershandleiding

Zorg ervoor dat er een tweede persoon in de buurt is die u kan helpen bij de montage en opstelling van de standaard.

Wees voorzichtig wanneer u de piano monteert en verplaatst en zorg dat u deze niet op uw handen of voeten laat vallen.

Voorzie een veilige locatie wanneer u de standaard monteert. Gebruik geen machinegereedschap (bijvoorbeeld een elektrische schroevendraaier) om de standaard te

monteren. U kunt de schroeven hiermee beschadigen. De KSC-68 is speciaal ontworpen voor gebruik met de F-20.

Montageprocedure

Controle van de onderdelen

* U hebt ook een Phillips-kruisschroevendraaier nodig.

* Schroef elke schroef goed vast en plaats de standaard vervolgens op een stabiele en horizontale ondergrond.

* Zorg ervoor dat de pedaalkabel en het netsnoer niet verdraaid of geklemd raken wanneer u de standaard monteert.

* De specificaties en/of het uiterlijk van de standaard zijn, in het belang van productverbetering, onderhevig aan veranderingen zonder voorafgaande kennisgeving.

1 Montagevandestandaard

Monteer de standaard eerst zonder hierbij de schroeven volledig vast te draaien. Controleer vervolgens of alle panelen goed op elkaar aansluiten (verschuif waar nodig voorzichtig bepaalde onderdelen) en draai daarna alle schroeven stevig vast.

1. Bevestig het zijpaneel (links) met de schroeven a (M5 x 20 mm) aan de linkerzijde van het middenpaneel (zodat de metalen onderdelen naar binnen wijzen).

2. Gebruik schroeven a (M5 x 20 mm) om het zijpaneel (rechts) op dezelfde manier te bevestigen.

12

Middenpaneel Zijpaneel (links)

Zijpaneel (rechts)

Plaats de metalen onderdelen van het middenpaneel in de richting van de achterkant.

Schroef a (x 6)

Voorkant

Achterkant

2 Depianoopdestandaardinstalleren

1. Plaats de piano op de standaard en draai de vier schroeven a (M5 x 20 mm) goed vast.

* Zorg ervoor dat u de piano stevig vasthoudt wanneer u deze hanteert. Let op dat uw vingers niet geklemd raken.

Schroef a (x 4)

Zijpaneel

Onderkant van de piano

Zorg ervoor dat uw vingers niet geklemd raken.

Draai de schroeven stevig vast en zorg dat de standaard niet uitsteekt.

3 Dehoofdtelefoonhaakbevestigen

1. Bevestig de hoofdtelefoonhaak met de schroeven b (M4 x 16 mm).

Schroef b (x 2)

Hoofdtelefoonhaak

Klavierstandaard voor F-20 KSC-68

A Zijpaneel (links) 1 st.

B Zijpaneel (rechts) 1 st.

C Middenpaneel 1 st.

1 Schroef a (M5 x 20 mm) 10 st.

2 Hoofdtelefoonhaak 1 st.

3 Schroef b (M4 x 16 mm) 2 st.

* 5 1 0 0 0 3 6 1 4 0 - 0 1 *

BELANGRIJKE OPMERKINGEN

Copyright 2013 ROLAND CORPORATION

Alle rechten voorbehouden. Niets uit deze uitgave mag op enige wijze worden gereproduceerd zonder schriftelijke toestemming van ROLAND CORPORATION. Roland is een gedeponeerd handelsmerk van Roland Corporation in de Verenigde Staten en/of andere landen.

HET APPARAAT VEILIG GEBRUIKEN D

eutsch Franais

Italiano Espaol

Portugus N

ederlands English

Gebruikt voor instructies die de gebruiker waarschuwen voor risico's op verwondingen of materiaalschade indien het apparaat verkeerd wordt gebruikt.

* Materiaalschade verwijst naar schade of negatieve effecten die veroorzaakt worden met betrekking tot de woning en de volledige inrichting, alsook huisdieren.

Gebruikt voor instructies die de gebruiker waarschuwen voor levensgevaarlijke risico's of risico's op verwondingen indien het apparaat verkeerd wordt gebruikt.

Het -symbool wijst de gebruiker op handelingen die moeten worden uitgevoerd. De specifieke handeling die moet worden uitgevoerd, wordt door het pictogram binnen de cirkel aangeduid. Het symbool links geeft aan dat het netsnoer uit het stopcontact moet worden getrokken.

Het -symbool waarschuwt de gebruiker voor belangrijke instructies of waarschuwingen. De specifieke betekenis van het symbool wordt bepaald door het pictogram binnen de driehoek. Het symbool links wordt gebruikt voor algemene waarschuwingen voor gevaar.

Het -symbool waarschuwt de gebruiker voor items die nooit mogen worden gebruikt (verboden). De specifieke handeling die niet mag worden gedaan, wordt door het pictogram binnen de cirkel aangeduid. Het symbool links betekent dat het apparaat nooit gedemonteerd mag worden.

Over aanduidingen WAARSCHUWING en OPGELET Over de symbolen

LET STEEDS OP HET VOLGENDE

HET APPARA EILI GEBRUIKEN INSTRUCTIES TER VERMIJDING VAN BRAND, ELEKTRISCHE SCHOKKEN OF VERWONDING VAN PERSONEN

WAARSCHUWING

OPGELET

Demonteer of wijzig de standaard nooit zelf Voer geen wijzigingen of herstellingen uit tenzij de gebruikershandleiding specifieke instructies geeft om dat te doen. Als u dit toch doet, kunt u defecten en/of schade aan de standaard veroorzaken.

Herstel of vervang zelf geen onderdelen Laat het onderhoud over aan uw handelaar, het dichtstbijzijnde Roland Service Center of een erkende Roland- verdeler, zoals vermeld in Informatie.

Gebruik of bewaar de standaard niet op de volgende plaatsen die aan extreme temperaturen

worden blootgesteld (bv. rechtstreeks zonlicht in een gesloten voertuig, in de buurt van een verwarmingsleiding, op materiaal dat warmte produceert);

nat zijn (bv. badkamers, wasruimtes, op natte vloeren);

aan damp of rook worden blootgesteld; aan zout worden blootgesteld; aan regen worden blootgesteld; stoffig of zanderig zijn; aan hoge trillingsniveaus en schokken

worden blootgesteld.

Plaats de standaard niet op een instabiele ondergrond Als u dit toch doet, loopt u het risico op letsel wanneer de standaard valt of omslaat.

Wees voorzichtig wanneer kinderen in de buurt zijn Een volwassene dient toezicht te houden en advies te geven wanneer de standaard gebruikt wordt op plaatsen waar kinderen aanwezig zijn of wanneer kinderen de standaard gebruiken.

Laat de standaard niet vallen en bescherm deze tegen zware schokken Als dit toch gebeurt, kan dit leiden tot defecten en/of schade aan de standaard.

OPGELET

Gebruik de standaard alleen voor de opgegeven producten De standaard is speciaal ontworpen voor gebruik in combinatie met de F-20 van Roland. Wanneer u de standaard gebruikt in combinatie met andere producten, loopt u het risico op letsel wanneer het product valt of omslaat als gevolg van onvoldoende stabiliteit.

Beoordeel de veiligheidsaspecten vooraleer u standaarden gebruikt Zelfs wanneer u de voorzorgsmaatregelen vermeld in de gebruikershandleiding opvolgt, kunnen sommige manieren van omgaan met de F-20 ervoor zorgen dat het toch van de standaard valt, of dat de standaard omslaat. Ga bewust om met de veiligheidsaspecten vooraleer dit apparaat te gebruiken.

Klim nooit op de standaard en plaats er geen zware voorwerpen op Als u dit toch doet, loopt u het risico op letsel wanneer de standaard valt of omslaat.

Houd kleine items buiten het bereik van kinderen Bewaar de volgende kleine onderdelen buiten het bereik van kleine kinderen om het per ongeluk inslikken van deze onderdelen te voorkomen.

Verwijderbare onderdelen Schroef

WAARSCHUWING

WARNING This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.

For C.A. US (Proposition 65)

WAARSCHUWING

Plaatsing

Stel de standaard niet bloot aan rechtstreeks zonlicht, plaats deze niet in de buurt van warmtebronnen, laat deze niet achter in een gesloten voertuig en stel deze niet bloot aan extreme temperaturen. Laat ook geen verlichting die in de buurt van de standaard wordt gebruikt (zoals een pianolamp) of sterke spots gedurende langere tijd op dezelfde plaats op de standaard schijnen. Overmatige hitte kan de standaard vervormen of verkleuren.

Laat geen rubber, vinyl of soortgelijke materialen gedurende langere tijd achter op de standaard. Dergelijke voorwerpen kunnen de standaard vervormen of verkleuren.

Kleef geen etiketten, stickers en dergelijke op de standaard. Als dergelijke materialen van het instrument verwijderd moeten worden, kan de afwerking beschadigd raken.

Afhankelijk van het materiaal en de temperatuur van het oppervlak waarop u de standaard plaatst, kunnen de rubberen voetstukken mogelijk het oppervlak verkleuren of ontsieren. U kunt een stuk vilt of stof onder de rubberen voetstukken plaatsen om dit te voorkomen. Zorg er in dat geval voor dat de standaard niet verschuift of per ongeluk in beweging komt.

Onderhoud

Gebruik voor het reinigen van de standaard een droge, zachte doek of een licht bevochtigde doek. Probeer het volledige oppervlak met dezelfde kracht te reinigen met de nerf van het hout mee. Als u te hard op eenzelfde plek wrijft, kan de afwerking beschadigd raken.

Gebruik geen benzine, verdunningsmiddelen, alcohol of oplosmiddelen om verkleuring en/of vervorming te voorkomen.

Net als met andere uit hout vervaardigde producten kan het hout van de standaard uitzetten en krimpen afhankelijk van de manier waarop en de omgeving waarin de standaard wordt gebruikt. In de loop van de tijd kunnen sommige schroeven hierdoor los komen te zitten. Om een veilig gebruik van de standaard te garanderen, moet u de stabiliteit van de schroeven regelmatig controleren volgens de afbeeldingen in de Montageprocedure. Als er schroeven los zijn komen te zitten, gebruikt u een schroevendraaier om ze terug vast te draaien.

D eu

ts ch

Fr an

a is

Ita lia

no Es

pa o

l Po

rt ug

u s

N ed

er la

nd s

En gl

is h

7 7

1

2

3

A BC

2 KSC-68 F-20

1

1. aM5 20mm

2. aM520mm

12

a 6

2

1. aM520mm

a4

3

1. bM416mm

b2

A 1 B 1 C 1 1 aM520mm 10 2 1 3 bM416mm 2

Keyboard stand for F-20 KSC-68

2013 Roland

F-20

F-20

8

Manualsnet FAQs

If you want to find out how the KSC-68 Roland works, you can view and download the Roland KSC-68 Stand Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Roland KSC-68 as well as other Roland manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Roland KSC-68. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Roland KSC-68 Stand Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Roland KSC-68 Stand Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Roland KSC-68 Stand Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Roland KSC-68 Stand Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Roland KSC-68 Stand Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.