Roland GO KEYS 61KL Owner's Manual PDF

Before using this unit, carefully read USING THE UNIT SAFELY and IMPORTANT NOTES (the leaflet USING THE UNIT SAFELY and the Owners Manual (p. 13)). After reading, keep the document(s) where it will be available for immediate reference.

Copyright 2017 ROLAND CORPORATION

Provision of Bluetooth functionality Please be aware that depending on the country in which you purchased the unit, Bluetooth functionality might not be included.

If Bluetooth functionality is included The Bluetooth logo appears when you turn on the power.

[PIANO] StageGrand

01

Contents Operating Guide 2

Selecting a Tone 2 Adjusting the Overall Volume 2 Applying an Effect to the Performance 2 Playing Back / Recording 2 Using the Keyboard to Play Patterns (Loop Mix Function) 3 Display 3 Confirming an Operation / Changing a Value 3 Making Various Settings (Setting) 3 Sounding Patterns According to the Chord You Play (Interactive Chord) 3 Clearing the Performance State 3 Connecting Equipment 4

Installing Batteries 4 Turning the Power On/Off 4

Performing with the Loop Mix Function 5 Playing Patterns According to the Chord You Play (Interactive Chord) 5

Recording with the Loop Mix Function 6

Convenient Functions 7 Loading a Song (SONG LOAD) 7 Deleting a Song (SONG DEL) 7 Backing-Up or Restoring Songs and Settings 7

Backing Up (BACKUP) 7 Restoring (RESTORE) 8

Restoring the Factory Settings (FACTORY RST) 8

Setting Various Functions (Setting) 8 Basic Operations in Setting 8

Adjusting the Volume of the Part (PART VOLUME) 8 Changing the Tempo (TEMPO) 8 Adjusting the Reverberation (REVERB LEVEL) 9

Changing the Pitch Range of the Keyboard in Steps of an Octave (OCTAVE SHIFT) 9 Transposing the Pitch (TRANSPOSE) 9 Matching the Pitch with Other Instruments (MASTER TUNE) 9 Specifying the Feel (Touch Response) of the Keyboard (KEY TOUCH) 9 Emitting an Operation Sound When You Press a Button (TOUCH SOUND) 9 Muting the Speakers When Headphones Are Connected (SP PHONES SW) 9 Displaying GM2 Tones (GM2 TONE) 9 Preserving the Settings When the Power Turns off (KEEP SETTING) 9 Making the Power Automatically Turn off After a Time (AUTO OFF) 9 Adjusting the Brightness of the Display (LCD CONTRAST) 9

Using the Bluetooth Functionality 10 Heres What You Can Do 10 Using Bluetooth Audio 10

Registering a Mobile Device (Pairing) 10 Connecting an Already-Paired Mobile Device 10

Transferring MIDI Data 11 Disabling the Bluetooth Functionality 11

Troubleshooting 12

USING THE UNIT SAFELY 13

IMPORTANT NOTES 13 Placing This Unit on a Stand 14 Main Specifications 14

Owners Manual Main features

5 The Loop Mix function lets you perform great-sounding music simply by selecting a genre and pressing keys.You can perform easily, without paying attention to pitch or timing. In addition, you can use the performance pads to apply effects in real time.

5 Bluetooth functionality allows interoperation with your smartphone or tablet. Music or the audio from a music video on your smartphone or tablet can be played via this instrument while you perform along with the music. You can also use this instruments keyboard to play a music app that supports Bluetooth MIDI (only for units equipped with Bluetooth).

5 The portable all-in-one design is compact and light-weight, featuring battery- powered operation, built-in high-quality speakers, and a stylish shape thats free of protrusions.

2

Operating Guide

Adjusting the Overall Volume You can adjust the volume of the speakers if youre using the built-in speakers, or the volume of the headphones if headphones are connected.

Adjusting the volume 020

Applying an Effect to the Performance While performing, you can vary the pitch or apply vibrato by touching your fingertip to the performance pad and moving it left or right.

Upper row

Lower row

Upper row Vary the pitch or apply vibrato, etc.

Lower row Pitch change

Applying a roll or filter effect

The effect thats applied when you touch the performance pad can be switched between roll and filter. 1 Press the [FUNC] button ( is lit)

Upper row Filter effect Lower row Roll effect

Selecting a Tone This instrument lets you enjoy performing with a variety of tones.

The tones are organized into eight groups, and are assigned to the corresponding tone buttons.

1 Press a tone button such as [PIANO], and then use the [] [+] buttons. If a tone other than a drum tone is selected: is lit

If a drum tone is selected: is lit

Reference For details on the tones, refer to Tone List at the end of this manual.

Tone groups

Button Explanation [PIANO] button Piano tones

[ORGAN] button Organ tones

[STRINGS] button Strings tones

[BRASS] button Brass tones

[DRUM] button Drum tones

[BASS] button Bass tones

[SYNTH] button Synthesizer tones

[FX/GUITAR] button Sound effects/Guitar tones

Playing Back / Recording Heres how to play back or record a song.

Play/Stop Press the [s] button.

Record-standby While stopped, press the [t] button.

Record From record-standby, press the [s] button.

Load a different song Loading a saved song (Load) (p. 7).

New recording

1 Select the sound (part) that you want to record.

2 Press the [t] button (t blinks). A count is heard in time with the tempo of the song (p. 8).

3 Play the keyboard to start recording (t is lit).

4 Press the [s] button to stop (t is unlit). A confirmation message appears.

5 To save, press the [ENTER] button. If you decide to cancel, press the [EXIT] button.

Overdubbing

1 Select a different sound (part) than you recorded in New recording. Alternatively, you can select the same sound and overdub it.

2 Press the [t] button (t blinks).

3 Play the keyboard to start recording (t is lit).

4 Press the [s] button to stop (t is unlit). A confirmation message appears.

5 To save, press the [ENTER] button. If you decide to cancel, press the [EXIT] button.

About the recording function

This instrument lets you overdub, where a performance using one of the tone buttons is considered as one part.

Tone button Song Piano part

Organ part

Brass tones

Strings part

FX/Guitar tones

PIANO

ORGAN

BRASS

STRINGS

FX/GUITAR

When playing back or recording, the screen shows the current measure, and the status of play/record progress within one measure.

Current measure

001

Play/record position

One measure

3

Operating Guide

Using the Keyboard to Play Patterns (Loop Mix Function) You can play patterns (accompaniment tones or drum tones) by pressing notes on the keyboard (loop mix function).

Patterns play repeatedly (as a loop) with a length of two measures.

By recording with the loop mix function, you can easily create a song.

Confirming an Operation / Changing a Value

Confirm an operation / Advance to the next screen

Press the [ENTER] button.

Cancel an operation / Return to the previous screen

Press the [EXIT] button.

Change a value Use the [] [+] buttons.

Making Various Settings (Setting) You can make various detailed settings for this instrument. 1 Press the [SETTING] button to select an item ( is lit).

The item switches each time you press the [SETTING] button.

2 Use the [] [+] buttons to change the value of the setting. Depending on the item that is selected, proceed with the operation by pressing a button such as [ENTER].

3 Press the [EXIT] button when youre finished making settings ( is unlit).

MEMO When youre making settings (while is lit), you can press the performance pad to select the setting item. C A

Display This shows the sound group name, the sound name, and the functions that are currently enabled.

Screen at startup (the Play screen)

[PIANO] StageGrand

01

Bluetooth connection status

Tone number

Current measure (only during playback/recording)

Playback/ recording position

Tone group name

Tone name

A non-drum tone is selected

page 8

page 5

page 6

Sounding Patterns According to the Chord You Play (Interactive Chord) While the loop mix function is playing patterns, you can switch patterns according to the chords you play (interactive chord function). 1 Use the loop mix function to play back patterns (p. 5).

2 Press the [CHORD] button ( blinks).

3 Play the keyboard in the left-most two-octave region. The pattern changes according to the chord you play. The screen shows the currently-played chord.

* For some patterns, the chords might not be displayed correctly, or the change might be difficult to understand.

4 Press the [CHORD] button to exit the interactive chord function ( is unlit).

MEMO 5 While the chord function is on,

the left-most two octaves of the keyboard are used only for inputting chords. Playing the keys in this region wont produce sound.

5 If you want to change the volume of the sound that youre playing in the right-hand region, adjust the PART VOLUME (p. 8).

Only for chord input

Clearing the Performance State Heres how to clear (erase) the loaded song and reset the sound settings. This is convenient if the song or sound settings have gotten into a state that you did not intend. You can recall the cleared song by loading it again (p. 7).

1 Press the [CLEAR] button. A confirmation message appears. If you decide to cancel, press the [EXIT] button.

2 Press the [ENTER] button.

MEMO 5 When the settings are reset, a piano tone (number 01) is selected. 5 Pressing the [CLEAR] button also clears the pattern playback status of the loop mix function. If you press the [CLEAR] button during pattern playback, all patterns stop, and the playback status is cleared.

4

Operating Guide

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.

Installing Batteries If six commercially available nickel-metal hydride or alkaline AA batteries are installed, you can perform without connecting an AC adaptor.

1 Remove the battery cover.

2 Install the batteries, making sure that they are oriented correctly.

3 Close the battery cover. * If you handle batteries improperly, you risk explosion and fluid leakage. Make sure that you

carefully observe all of the items related to batteries that are listed in USING THE UNIT SAFELY and IMPORTANT NOTES (leaflet USING THE UNIT SAFELY and Owners Manual p. 13).

* When the batteries run low, the display indicates Battery Low! When this occurs, install fresh batteries.

Turning the Power On/Off 1 Press the [L] (power) button to turn on the power.

2 Use the [ ] [ ] buttons to adjust the volume.

3 To turn the power off, hold down the [L](power) button for one second or longer.

Concerning the Auto Off function The power to this unit will be turned off automatically after a predetermined amount of time has passed since it was last used for playing music, or its buttons or controls were operated (Auto Off function).

If you do not want the power to be turned off automatically, disengage the Auto Off function (p. 9).

NOTE

To restore power, turn the power on again.

1 2

Connecting Equipment

USB COMPUTER port You can connect this instrument to your computer, and back up this instruments song data and settings to the computer (p. 7). Use a commercially available micro USB cable to make this connection. * Do not use a micro USB cable that is

designed only for charging a device. Charge-only cables cannot transmit data.

DC IN jack Connect the included AC adaptor here.

PEDAL jack You can connect a pedal switch (sold separately: DP series) and use it as a hold pedal.

If this is connected, is lit.

PHONES/OUTPUT jack You can connect headphones (sold separately) or an amplified speaker here.

If this is connected, is lit.

AUX IN jack You can connect an audio player (such as a smartphone) or other audio playback device here.

5

Loop mix is a function that lets you play patterns (accompaniment tones or drum tones) by pressing notes on the keyboard.

Patterns for each tone part are assigned to five areas of the keyboard. These five areas are collectively called a loop mix set.

One pattern can be played in each area; patterns are two measures long, and play back repeatedly (as a loop).

In every loop mix set, a drum pattern is assigned to area 1 and a bass pattern is assigned to area 2.

This instrument lets you enjoy performing with loop mix sets that cover a wide variety of musical genres.

* The song function and the loop mix function cant be used at the same time.

MEMO

5 You can change the tempo of the pattern (p. 8).

5 Only in area 5, you can play patterns with multiple tone parameters. You can also press multiple keys at the same time to play them simultaneously.

5 For details on the loop mix sets and patterns, refer to Loop Mix Set List at the end of this manual.

Here we explain the procedure for performing a bass tone while sounding a drum tone.

3 4

51 2

Selecting a loop mix set 1 Press the [LOOP MIX] button to turn the loop mix function on ( is lit).

If you press the [LOOP MIX] button while a song is loaded, the display indicates CLEAR SONG? If you want to use the loop mix function, press the [ENTER] button to clear the song. You can recall the cleared song by loading it again (p. 7).

2 Use the [] [+] buttons to select the loop mix set that you want.

Playing a drum part pattern 3 Press one of the keys in area 1.

A drum tone pattern sounds.

Area

1 42 3 5

During playback: blinking

Playing a bass part pattern 4 Press keys in area 2 one at a time.

A bass tone pattern sounds.

If you want to add more parts to the playback, press keys in each of the other areas.

5 Press the [LOOP MIX] button to return to the normal performance state ( is unlit). To stop the pattern, press the [s] button.

Playing Patterns According to the Chord You Play (Interactive Chord) While the loop mix function is playing patterns, you can use the interactive chord function to vary the patterns according to the chords that you play.

For more about the interactive chord function, refer to Sounding Patterns According to the Chord You Play (Interactive Chord) (p. 3).

To stop the patterns

To stop one pattern

Press the right-most key of the area whose pattern you want to stop.

To stop all patterns

Press the [s] button. If you press the [s] button once again, the patterns play in the previous state.

Performing with the Loop Mix Function

Set of five areas

Area

1 4

Loop mix set

2 Drum pattern

Bass pattern

3 5

6

Recording with the Loop Mix Function You can easily create a song by recording with the loop mix function.

* If you want to record a new song, clear the song before you proceed (p. 3).

Here we explain the procedure for recording the drum tone and bass tone.

4

7

1

3 25

6

Selecting a loop mix set

1 Press the [LOOP MIX] button to turn the loop mix function on ( is lit).

2 Use the [] [+] buttons to select the loop mix set that you want.

Recording your performance

3 Press the [t] button (t blinks). Now youre in the record-standby state.

4 Press a key in each area to start recording (t is lit). When you press a key, recording starts and the number of recorded measures is shown in the screen.

Current measure

001

Record position

One measure

MEMO

Your performance using the interactive chord function (p. 3) is also recorded.

5 Press the [s] button to stop recording (t is unlit). A confirmation message appears.

6 To save, press the [ENTER] button. If you decide to cancel, press the [EXIT] button.

7 When you once again press the [s] button, the recorded performance plays back.

7

Convenient Functions

Loading a Song (SONG LOAD) Heres how to load a song thats saved in internal memory.

* When you load a song, the recorded data of the current song is lost. If youve created a song that you want to keep, you should save it.

1 Press the [SETTING] button several times to make the display indicate SONG LOAD.

SONG LOAD Press[ENTER]

2 Press the [ENTER] button. 3 Use the [] [+] buttons to select the song that you

want to load.

SONG LOAD SONG01.MID

4 Press the [ENTER] button. When a song is loaded, the indicator in the lower part of the screen is lit.

001

Deleting a Song (SONG DEL) Heres how to delete a song thats saved in internal memory.

1 Press the [SETTING] button several times to make the display indicate SONG DEL.

SONG DEL Press[ENTER]

2 Press the [ENTER] button. 3 Use the [] [+] buttons to select the song that you

want to delete.

SONG DEL SONG01.MID

4 Press the [ENTER] button. A confirmation message appears.

SONG DEL Sure?

If you decide to cancel, press the [EXIT] button.

5 Press the [ENTER] button.

The song is deleted.

Backing-Up or Restoring Songs and Settings

Songs (SMF format) and settings that youve saved in this instrument can be backed-up to your computer. Songs and settings that youve backed-up on your computer can also be restored to this instrument.

* Before you execute backup or restore, use a micro USB cable to connect this instrument to your computer.

MEMO

Since songs are in SMF format, you can use them in your DAW or other music software.

Backing Up (BACKUP) 1 Press the [SETTING] button several times to make

the display indicate BACKUP.

BACKUP Press[ENTER]

2 Press the [ENTER] button. The BACKUP drive appears in the screen of your computer.

3 Copy the GO-61 folder of the BACKUP drive to your computer. * Copy this entire GO-61 folder to your computer. Similarly

when executing restore, copy the entire GO-61 folder. Backup or restore wont occur correctly if you copy just the folder thats inside the GO-61 folder, or if you copy only some of the files.

4 On your computer, perform the appropriate steps to end (unmount) the connection with this instrument. The normal screen of this instrument reappears.

MEMO

When backing up or restoring data, there might be cases in which backup or restore does not proceed even if you end (unmount) the connection on your computer.

If so, end the connection on your computer, and then press the [EXIT] button of this instrument.

If youre using a Mac, end the connection; then when youre finished, press this instruments [EXIT] button.

8

Setting Various Functions (Setting)

Setting Various Functions (Setting)

Basic Operations in Setting 1 Press the [SETTING] button to select an

item ( is lit). The item switches each time you press the [SETTING] button

2 Use the [] [+] buttons to change the value of the setting.

3 Press the [EXIT] button when youre finished making settings ( is unlit).

Indication Value/Explanation

PART VOLUME *1

Adjusting the Volume of the Part (PART VOLUME)

This adjusts the volume of the part. * Use a tone button to select the part that you want to adjust. 0127

TEMPO *1

Changing the Tempo (TEMPO) This changes the tempo of the song and pattern.

MEMO You can also specify the tempo by pressing the performance pad at the appropriate interval of timing (tap tempo).

5300

MEMO 5 When youre making settings (while is lit), you can press the performance pad to select the setting item.

C A

5 The lower part of the screen shows the position of the selected item.

01

Beginning End

5 These settings can be backed up (p. 7).

Restoring (RESTORE) 1 Press the [SETTING] button several times to make

the display indicate RESTORE.

RESTORE Press[ENTER]

2 Press the [ENTER] button. The RESTORE drive appears in the screen of your computer.

3 Copy the GO-61 folder into the RESTORE drive.

4 On your computer, perform the appropriate steps to end (unmount) the connection with this instrument. When the connection is ended, restore begins.

When restore is completed, the screen indicates Completed. TurnOffPower.

5 Turn the power of this instrument off and on again (p. 4).

Restoring the Factory Settings (FACTORY RST)

Heres how the settings of this instrument can be returned to their factory-set state. This operation is called factory reset.

NOTE

When you execute this operation, all songs and settings saved in this instrument are lost. If there are songs that you want to keep, back them up to your computer (p. 7).

1 Press the [SETTING] button several times to make the display indicate FACTORY RST.

FACTORY RST Press[ENTER]

2 Press the [ENTER] button. A confirmation message appears.

FACTORY RST Sure?

If you decide to cancel, press the [EXIT] button.

3 Press the [ENTER] button. The factory reset is executed.

9

Setting Various Functions (Setting)

Indication Value/Explanation

REVERB LEVEL *1 Adjusting the Reverberation (REVERB LEVEL)

This adds reverberation that is characteristic of a performance in a concert hall. 010

OCTAVE SHIFT *1 Changing the Pitch Range of the Keyboard in Steps of an Octave (OCTAVE SHIFT)

This shifts the pitch of the keyboard in steps of an octave. -303

TRANSPOSE *1

Transposing the Pitch (TRANSPOSE) The keyboard can be transposed in semitone steps.

For example if a song is in the key of E major but you want to play it using the fingering of the C major scale, you would set the keyboard transpose setting to 4. -50+6

MASTER TUNE

Matching the Pitch with Other Instruments (MASTER TUNE) When playing ensemble with other instruments and in other such instances, you can match the standard pitch to another instrument. The standard pitch generally refers to the pitch of the note thats played when you finger the middle A key. For a cleaner ensemble sound while performing with one or more other instruments, ensure that each instruments standard pitch is in tune with that of the other instruments. This tuning of all the instruments to a standard pitch is called master tuning. 415.3 Hz440.0 Hz466.2 Hz

KEY TOUCH

Specifying the Feel (Touch Response) of the Keyboard (KEY TOUCH) This changes the feel (touch response) of the keyboard. If youve specified Fix, notes will sound at the same volume regardless of how strongly you play the keyboard. Fix, Light, Medium, Heavy

TOUCH SOUND Emitting an Operation Sound When You Press a Button (TOUCH SOUND)

You can specify whether an operation sound is played (On) or is not played (Off) when you press one of this instruments buttons.

SP PHONES SW Muting the Speakers When Headphones Are Connected (SP PHONES SW)

This specifies whether connecting headphones automatically mutes this instruments speakers (On) or does not mute them (Off).

GM2 TONE

Displaying GM2 Tones (GM2 TONE) This specifies whether GM2 tones are shown (On) or not shown (Off) when youre selecting tones.

Reference For details on the GM2 tones, refer to Tone List at the end of this manual.

KEEP SETTING

Preserving the Settings When the Power Turns off (KEEP SETTING) The following settings return to their default values when you turn off the power; however by turning this setting On, you can preserve the settings that were in use when the power was turned off. The next time the power turns on, those previous settings are reproduced. Settings that can be preserved: PART VOLUME, TEMPO, REVERB LEVEL, OCTAVE SHIFT, TRANSPOSE, and the tone that is selected for each group

SONG LOAD Refer to Loading a Song (SONG LOAD) (p. 7).

SONG DEL Refer to Deleting a Song (SONG DEL) (p. 7). BLUETOOTH

Refer to Using the Bluetooth Functionality (p. 10).BT PAIRING BLUETOOTH ID BACKUP Refer to Backing-Up or Restoring Songs and Settings (p. 7). RESTORE

AUTO OFF

Making the Power Automatically Turn off After a Time (AUTO OFF) This instrument automatically turns off its power when 30 minutes have elapsed since it was last played or operated (this is the factory setting).

If you dont want the power to turn off automatically, set Auto Off to Off. Off, 30, 240 (min)

LCD CONTRAST Adjusting the Brightness of the Display (LCD CONTRAST)

Adjusts the brightness of this instruments display. 010

FACTORY RST Refer to Restoring the Factory Settings (FACTORY RST) (p. 8). VERSION This shows the version of this instruments program.

*1: Settings that can be preserved by KEEP SETTING

If you play C E G0It will sound E G B

10

Using the Bluetooth Functionality

Provision of Bluetooth functionality Please be aware that depending on the country in which you purchased the unit, Bluetooth functionality might not be included. If Bluetooth functionality is included

[PIANO] StageGrand

01

The Bluetooth logo appears when you turn on the power.

Heres What You Can Do Bluetooth functionality creates a wireless connection between a mobile device such as a smartphone or tablet (subsequently referred to as the mobile device) and this unit, allowing you to do the following.

Bluetooth audio You can use the speakers of this instrument to listen to music or music videos played on your mobile device.

MIDI data transmission and reception MIDI data can be exchanged between this unit and the mobile device.

You can use the keyboard of this instrument to play a music app that supports Bluetooth MIDI.

Using Bluetooth Audio * The volume of the Bluetooth audio cannot be adjusted from

this unit. Adjust the volume on the mobile device.

Registering a Mobile Device (Pairing) Pairing is the procedure by which the mobile device that you want to use is registered on this unit (the two devices recognize each other).

Make settings so that music data saved on the mobile device can be played wirelessly via this unit.

MEMO

5 Once a mobile device has been paired with this unit, there is no need to perform pairing again. If you want to connect this unit with a mobile device that has already been paired, refer to Connecting an Already-Paired Mobile Device (p. 10).

5 Pairing is required again if you execute a Factory Reset (p. 8).

5 The following explanation of the procedure is only one example. For details, refer to the owners manual of your mobile device.

* Make sure that this units Bluetooth function is On (settings0BLUETOOTH turned On).

1 Place the mobile device that you want to connect nearby this unit.

MEMO

If you have more than one unit of this model, power-on only the unit that you want to pair (power-off the other units).

2 Press the [SETTING] button several times to make the display indicate BT PAIRING.

3 Press the [ENTER] button. The display indicates PAIRING..., and this unit waits for a response from the mobile device.

MEMO

If you decide to cancel pairing, press the [Exit] button.

4 Turn on the Bluetooth function of the mobile device.

MEMO

The explanation here uses the iPhone as an example. For details, refer to the owners manual of your mobile device.

5 Tap GO:KEYS Audio that is shown in the Bluetooth device screen of your mobile device. This unit is paired with the mobile device. When pairing succeeds, GO:KEYS Audio is added to the list of Paired Devices on your mobile device.

6 Press the [EXIT] button when youre finished making settings.

Specifying the Bluetooth ID You can specify a number that is added following the device name of this unit when it is displayed by a Bluetooth connected application.

If you own multiple units of the same instrument, this is a convenient way to distinguish them.

1 Press the [SETTING] button several times to make the display indicate BLUETOOTH ID.

2 Use the [] [+] buttons to edit the value of the setting.

Parameter Explanation

Off, 19 Set to Off: GO:KEYS Audio, GO:KEYS MIDI (default value)

Set to 1: GO:KEYS Audio 1, GO:KEYS MIDI 1

Connecting an Already-Paired Mobile Device 1 Turn on the Bluetooth function of the mobile

device. MEMO

5 If you were unable to establish a connection using the procedure above, tap GO:KEYS Audio that is displayed in the Bluetooth device screen of the mobile device.

5 To disconnect, either turn this units Bluetooth Audio function Off (Setting0turn BLUETOOTH Off) or turn the mobile devices Bluetooth function off.

Pairing

11

Using the Bluetooth Functionality

Transferring MIDI Data Heres how to make settings for transmitting and receiving MIDI data between this unit and the mobile device.

Note when using an already-paired iOS device The following operation is required after each time that you execute a factory reset.

1 Disconnect GO:KEYS MIDI. 2

Turn off.

GO:KEYS MIDI

GO:KEYS MIDI

For details, refer to the owners manual of your iOS device.

* Make sure that this units Bluetooth function is On (settings0BLUETOOTH turned On).

1 Place the mobile device that you want to connect nearby this unit.

MEMO

If you have more than one unit of this model, power-on only the unit that you want to pair (power-off the other units).

2 Turn on the Bluetooth function of the mobile device.

MEMO

The explanation here uses the iPhone as an example. For details, refer to the owners manual of your mobile device.

3 In the mobile devices app (e.g., GarageBand), establish a connection with this unit.

NOTE

Do not tap the GO:KEYS MIDI that is shown in the Bluetooth settings of the mobile device.

Disabling the Bluetooth Functionality Disable the Bluetooth functionality if you dont want this unit to be connected via Bluetooth with your mobile device.

1 Press the [SETTING] button several times to make the display indicate BLUETOOTH.

2 Use the [] [+] buttons to turn the setting Off.

3 Press the [EXIT] button when youre finished making settings.

12

Troubleshooting Problem Items to check Action Page

Power turns off on its own Could the auto-off setting be something other than Off?

If you dont need the power to turn off automatically, turn the Auto Off setting Off. p. 9

Power turns on unexpectedly

Is the AC adaptor connected correctly? Could the batteries be exhausted? Install fresh batteries. p. 4 If you connect the AC adaptor and turn on the power when batteries are installed, the AC adaptor will be used preferentially. Even if batteries are installed, the power will not turn on unless the AC adaptor is connected to an AC outlet.

If youre using batteries, disconnect the AC adaptor from this unit. If batteries are installed, connecting or disconnecting the power cord from the outlet or connecting or disconnecting the DC plug of the AC adaptor while this unit is turned on will cause the power to turn off.

Pedal does not work, or is stuck Is the pedal connected correctly? p. 4

The volume level of the unit connected to AUX IN jack is too low Could the volume of the connected device be turned down?

No sound

Are your amp, speakers, headphones, etc., connected correctly? p. 4 Is the volume turned down? p. 2

Could the interactive chord function be turned on?

Turn off the interactive chord function.

While the chord function is on, the left-most two octaves of the keyboard are used only for inputting chords. Playing the keys in this region wont produce sound.

p. 3

Notes dont sound right The notes you play on the keyboard dont sound

Could the loop mix function be turned on? Turn off the loop mix function. p. 5

The notes have the wrong pitch Could you have changed the transpose setting? p. 9

Problems with Bluetooth functionality

Problem Items to check/Action Page

This unit does not appear in the Bluetooth device list of your mobile device

Could the Bluetooth function be turned Off?

Turn the Bluetooth function On.

Setting0turn BLUETOOTH On

Bluetooth Audio function:

A device named GO:KEYS Audio appears.

Bluetooth MIDI function:

A device named GO:KEYS MIDI appears.

You can check this from the settings inside an app such as GarageBand.

p. 11

Cant connect to Bluetooth audio

If this unit is visible as a device in the mobile devices Bluetooth settings

Delete the devices registration, turn the Bluetooth Audio function Off and then On again, and establish pairing once again. p. 11

If this unit is not visible as a device Turn the mobile devices Bluetooth function off and then on again, and initiate pairing from this unit to re-establish pairing. p. 10

Cant connect to Bluetooth MIDI

In some cases, the connection with the mobile device might become unavailable when you switch the Bluetooth MIDI function.

After unpairing the GO:KEYS MIDI that is registered on the mobile device, turn the mobile devices Bluetooth function off and then on again, and reconnect it.

Cant connect via MIDI

You must make the connection not from the mobile devices Bluetooth setting but from the setting within GarageBand or other app that youre using.

Cant establish pairing with the MIDI function

The MIDI function is paired when you first select a device on the mobile device and establish a connection. There is no need to initiate pairing from this unit.

Cant connect a paired mobile device

If the connection breaks immediately after it is established, turning the Bluetooth devices Bluetooth switch off and then on again may allow connection to occur.

MEMO

If checking these points does not solve the problem, please refer to the Roland support website.

http://www roland com/support/

13

USING THE UNIT SAFELY

WARNING Concerning the Auto Off function

The power to this unit will be turned off automatically after a predetermined amount of time has passed since it was last used for playing music, or its buttons or controls were operated (Auto Off function). If you do not want the power to be turned off automatically, disengage the Auto Off function (p. 9).

Use only the stand that is recommended

This unit should be used only with a stand that is recommended by Roland.

Do not place in a location that is unstable

When using the unit with a stand recommended by Roland, the stand must be carefully placed so it is level and sure to remain stable. If not using a stand, you still need to make sure that any location you choose for placing the unit provides a level surface that will properly support the unit, and keep it from wobbling.

WARNING Precautions regarding placement of this unit on a stand

Be sure to follow the instructions in the Owners Manual carefully when placing this unit on a stand (p. 14).

If it is not set up properly, you risk creating an unstable situation which could lead to the unit falling or the stand toppling, and may result in injury.

Use only the supplied AC adaptor and the correct voltage

Be sure to use only the AC adaptor supplied with the unit. Also, make sure the line voltage at the installation matches the input voltage specified on the AC adaptors body. Other AC adaptors may use a different polarity, or be designed for a different voltage, so their use could result in damage, malfunction, or electric shock.

CAUTION Use only the specified stand(s)

This unit is designed to be used in combination with specific stands (KS-12) manufactured by Roland. If used in combination with other stands, you risk sustaining injuries as the result of this product dropping down or toppling over due to a lack of stability.

Evaluate safety issues before using stands

Even if you observe the cautions given in the owners manual, certain types of handling may allow this product to fall from the stand, or cause the stand to overturn. Please be mindful of any safety issues before using this product.

IMPORTANT NOTES Power Supply: Use of Batteries

If operating this unit on batteries, please use alkaline batteries, rechargeable Ni- MH batteries.

Even if batteries are installed, the power turns off if the power cord is disconnected from the AC outlet while the power is on, or if the AC adaptor is disconnected from this instrument. In this case, unsaved data might be lost. Be sure to turn off the power before you disconnect the power cord or the AC adaptor.

Placement Do not allow objects to remain on top

of the keyboard. This can be the cause of malfunction, such as keys ceasing to produce sound.

Depending on the material and temperature of the surface on which you place the unit, its rubber feet may discolor or mar the surface.

Repairs and Data Before sending the unit away for repairs,

be sure to make a backup of the data stored within it; or you may prefer to write down the needed information. Although we will do our utmost to preserve the data stored in your unit when we carry out repairs, in some cases, such as when the memory section is physically damaged, restoration of the stored content may be impossible. Roland assumes no liability concerning the restoration of any stored content that has been lost.

Care of the Keyboard Do not write on the keyboard with any

pen or other implement, and do not stamp or place any marking on the instrument. Ink will seep into the surface lines and become unremovable.

Do not affix stickers on the keyboard. You may be unable to remove stickers that use strong adhesives, and the adhesive may cause discoloration.

To remove stubborn dirt, use a commercially available keyboard cleaner that does not contain abrasives. Start by wiping lightly. If the dirt does not come off, wipe using gradually increasing amounts of pressure while taking care not to scratch the keys.

Additional Precautions Any data stored within the unit can be

lost as the result of equipment failure, incorrect operation, etc. To protect yourself against the irretrievable loss of data, try to make a habit of creating regular backups of the data youve stored in the unit.

Roland assumes no liability concerning the restoration of any stored content that has been lost.

Never strike or apply strong pressure to the display.

Do not use connection cables that contain a built-in resistor.

Caution Regarding Radio Frequency Emissions The following actions may subject you to

penalty of law.

Disassembling or modifying this device.

Removing the certification label affixed to the back of this device.

14

IMPORTANT NOTES

Placing This Unit on a Stand Be careful not to pinch your fingers when setting up the stand (KS-12; sold separately).

Place the instrument on the stand as follows.

Adjust the width of the stand so that the rubber feet at the front of the GO:KEYS fit into the corresponding holes.

Top View

Main Specifications Roland GO:KEYS : Music Creation Keyboard

Keyboard 61 keys (Ivory Feel and Box-shape Keys with velocity)

Bluetooth

Bluetooth Ver 4.2

Profile Support: A2DP (Audio), GATT (MIDI over Bluetooth Low Energy)

Codec: SBC (Support to the content protection of the SCMS-T method)

Power Supply AC adaptor or Alkaline battery (AA, LR6) / Rechargeable Ni-MH battery (AA, HR6) x 6

* Carbon-zinc batteries cannot be used.

Current Draw 1,000 mA

Battery Life for Continuous Use

Rechargeable Ni-MH batteries (AA, HR6): Approximately 6 hours (When using batteries having a capacity of 1,900 mAh.)

Alkaline batteries (AA, LR6): Approximately 4 hours

* This figure will vary depending on the actual conditions of use.

Dimensions 877 (W) x 271 (D) x 82 (H) mm

34-9/16 (W) x 10-11/16 (D) x 3-1/4 (H) inches

Weight 3.9 kg/8 lbs 10 oz (excluding AC adaptor)

Accessories Owners manual, Leaflet USING THE UNIT SAFELY, AC adaptor

Options (sold separately)

Keyboard stand: KS-12

Pedal switch: DP series

* This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to the Roland website.

Intellectual Property Right It is forbidden by law to make an audio

recording, video recording, copy or revision of a third partys copyrighted work (musical work, video work, broadcast, live performance, or other work), whether in whole or in part, and distribute, sell, lease, perform, or broadcast it without the permission of the copyright owner.

Do not use this product for purposes that could infringe on a copyright held by a third party. We assume no responsibility whatsoever with regard to any infringements of third-party copyrights arising through your use of this product.

The copyright of content in this product (the sound waveform data, style data, accompaniment patterns, phrase data, audio loops and image data) is reserved by Roland Corporation.

Purchasers of this product are permitted to utilize said content (except song data such as Demo Songs) for the creating, performing, recording and distributing original musical works.

Purchasers of this product are NOT permitted to extract said content in original or modified form, for the purpose of distributing recorded medium of said content or making them available on a computer network.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Roland is under license.

Roland and GO:KEYS are either registered trademarks or trademarks of Roland Corporation in the United States and/or other countries.

Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.

Tone List PIANO No. Tone name 01 StageGrand 02 ConcertGrand 03 Pop Piano 04 Rokkin' pF 05 Mellow Tune 06 Phase EP 07 Pure EP Trem 08 sin(EP) 09 FM EP mix 10 Pop Bell 11 Frends Bell 12 D50Fantasia 13 Fairy Piano 14 Grand Hall 15 Piano+Str 16 Piano+Pad 17 Layers 18 Rapsody 19 Dyno EP 20 SA Dance Pno 21 TEL Stage EP 22 Back2the60s 23 Mk2 Stg phsr 24 TineEP+Pad 25 Wurly Trem 26 Vintage Tine 27 Pulse Clavi 28 Snappy Clavi 29 Funky D 30 Biting Clavi 31 BPF Clavi Ph 32 EP Bell 33 Candy Bell 34 J-Bell 35 Chime 36 Vibe Trem 37 50`SteelDrms 38 Housechord GM2 39 Piano 1 40 Piano 1w 41 European Pf 42 Piano 2 43 Piano 2w 44 Piano 3 45 Piano 3w 46 Honky-tonk 47 Honky-tonk 2 48 E.Piano 1 49 St.Soft EP 50 FM+SA EP 51 Wurly 52 E.Piano 2 53 Detuned EP 2 54 St.FM EP 55 EP Legend 56 EP Phase 57 Harpsichord 58 Coupled Hps. 59 Harpsi.w 60 Harpsi.o 61 Clav. 62 Pulse Clav 63 Celesta 64 Glockenspiel 65 Music Box 66 Vibraphone 67 Vibraphone w 68 Marimba 69 Marimba w 70 Xylophone 71 Tubular-bell 72 Church Bell 73 Carillon 74 Tinkle Bell 75 Echo Drops 76 Echo Bell 77 Echo Pan 78 Star Theme

ORGAN No. Tone name 01 Pop Organ 02 B Org 03 Perc Organ 04 Rochno Org 05 HardRockORG 06 GT Org Stack 07 FullStop Org 08 FullDraw Org 09 StakDraw Org 10 D.Bar Org 1 11 D.Bar Org 2 12 D.Bar Org 3 13 Rhythm'n'B 14 R&B Organ 1 15 R&B Organ 2 16 SuperDist Ld 17 Smoky Organ 18 Soap Opera 19 Crummy Organ 20 Chapel Organ 21 Cathedral 22 Pipe Organ 1 23 Pipe Organ 2 24 Squeeze Me! 25 J-Harm 26 Blues harp 27 Jazz Scat 28 Syn Opera 29 Vox Pad 30 Gospel Oohs 31 Morning Star 32 Paradise GM2 33 Organ 1 34 Trem. Organ 35 60's Organ 1 36 70's E.Organ 37 Organ 2 38 Chorus Or.2 39 Perc. Organ 40 Organ 3 41 Church Org.1 42 Church Org.2 43 Church Org.3 44 Reed Organ 45 Puff Organ 46 Accordion Fr 47 Accordion It 48 Harmonica 49 Bandoneon

STRINGS No. Tone name 01 String Ens 02 Staccato 03 Pizzicato 04 Super SynStr 05 JP Strings 06 Syn Strings 07 Strings Pad 08 Stringship 09 Sahara Str 10 Chamber Str 11 Marcato 12 Full Strings 13 Oct Strings 14 Biggie Bows 15 Str Stacc mp 16 Orch Pizz 17 BrightViolin 18 Bright Cello 19 Clustered!?! 20 Movie Scene 21 Tronic Str 22 Symphonika 23 Cheezy Movie 24 StepPitShift 25 NuSoundtrack 26 Reso Pad 27 Slow Saw Str 28 Summer Pad 29 Frends Pad 30 Borealis GM2 31 Violin 32 Slow Violin 33 Viola 34 Cello 35 Contrabass 36 Tremolo Str 37 PizzicatoStr 38 Strings 39 Orchestra 40 60s Strings 41 Slow Strings 42 Syn.Strings1 43 Syn.Strings3 44 Syn.Strings2 45 Choir Aahs 46 Chorus Aahs 47 Voice Oohs 48 Humming 49 SynVox 50 Analog Voice 51 Fiddle 52 OrchestraHit 53 Bass Hit 54 6th Hit 55 Euro Hit

BRASS No. Tone name 01 BreakOut Brs 02 DetuneSawBrs 03 J-Pop Brass 04 JUNO-106 Brs 05 Wide Syn Brs 06 80s Brass 07 Dual Saw Brs 08 Poly Brass 09 BreakOut Key 10 Brass & Sax 11 BrassPartOut 12 Ambi Tp 13 Harmon Mute 14 Soft Tb 15 Spit Flugel 16 JP8000 Brass 17 J-Brass 18 Super Saw 19 SoftSynBrass 20 Windy Synth 21 Silky JP 22 Cheesy Brass 23 Stacked Brs 24 Horny Sax 25 XP TnrBrethy 26 Ethnic Lead 27 Lochscape GM2 28 Trumpet 29 Dark Trumpet 30 Trombone 31 Trombone 2 32 Bright Tb 33 Tuba 34 MutedTrumpet 35 MuteTrumpet2 36 French Horns 37 Fr.Horn 2 38 Brass 1 39 Brass 2 40 Synth Brass1 41 Pro Brass 42 Oct SynBrass 43 Jump Brass 44 Synth Brass2 45 SynBrass sfz 46 Velo Brass 1 47 Soprano Sax 48 Alto Sax 49 Tenor Sax 50 Baritone Sax 51 Oboe 52 English Horn 53 Bassoon 54 Clarinet 55 Piccolo 56 Flute 57 Recorder 58 Pan Flute 59 Bottle Blow 60 Shakuhachi 61 Whistle 62 Ocarina 63 Bagpipe 64 Shanai

DRUM No. Tone name 01 HipHop Kit 02 R&B Kit 03 Pop Kit 1 04 Pop Kit 2 05 Rock Kit 06 Dance Kit 1 07 Dance Kit 2 08 Dance Kit 3 09 Dance Kit 4 10 Brush Jz Kit GM2 11 GM2 STANDARD 12 GM2 ROOM 13 GM2 POWER 14 GM2 ELECTRIC 15 GM2 ANALOG 16 GM2 JAZZ 17 GM2 BRUSH 18 GM2 ORCHSTRA 19 GM2 SFX 20 Timpani 21 Agogo 22 Steel Drums 23 Woodblock 24 Castanets 25 Taiko 26 Concert BD 27 Melo. Tom 1 28 Melo. Tom 2 29 Synth Drum 30 808 Tom 31 Elec Perc 32 Reverse Cym.

Tone List

BASS No. Tone name 01 Saw&MG Bass1 02 Mini Like! 03 Moogy Bass 04 SH Sawtooth 05 Foundation 06 Return2Base! 07 Chorus Bass 08 A Big Pick 09 Ulti Ac Bass 10 Big Mini 1 11 Big Mini 2 12 Bs TB 13 SH-101 Bs 14 SH-2 Bs 15 JUNO-106 Bs 16 Garage Bass 17 Low Bass 18 Downright Bs 19 Cmp'd Fng Bs 20 FingerMaster 21 Finger Bs 22 RichFretless 23 Fat RubberBs 24 JUNO Acid Bs 25 Oil Can Bass 26 Big Mini 3 27 Moogy Bass 2 28 JUNO Reso 29 Alpha SynBs2 30 SH Square 31 MC-404 Bass 32 Electro Rubb 33 DCO Bass 34 Saw&MG Bass2 35 Not a Bass 36 Punch MG 1 37 MKS-50 SynBs 38 Kickin' Bass 39 OilDrum Bass 40 Dust Bass 41 Glide-iator 42 Acid Punch 43 MC-TB Bass 44 Acdg Bass 45 Unplug it! 46 S&H Bass 47 Destroyed Bs 48 Muffled MG 49 Intrusive Bs 50 TransistorBs GM2 51 Acoustic Bs. 52 Fingered Bs. 53 Finger Slap 54 Picked Bass 55 Fretless Bs. 56 Slap Bass 1 57 Slap Bass 2 58 Synth Bass 1 59 SynthBass101 60 Acid Bass 61 Clavi Bass 62 Hammer 63 Synth Bass 2 64 Beef FM Bass 65 RubberBass 2 66 Attack Pulse

No. Tone name 01 Saw Lead 02 Jump Poly 03 JP OctAttack 04 Gwyo Press 05 Spooky Lead 06 GR Lead 07 Anadroid 08 Octa Juice 09 Saw Keystep 10 Synth Key 11 Pure Square 12 Sqr-Seqence 13 forSequence 14 Synthi Fizz 15 Legato Saw 16 Digitaless 17 Dance Saws 18 Houze Clavi 19 Hot Coffee 20 Digi-vox Syn 21 Wind Syn Ld 22 JUNO Lead 23 Octa Sync 24 DC Triangle 25 Griggley 26 Dual Profs 27 Clean? 28 Syn Lead 1 29 Syn Lead 2 30 Destroyed Ld 31 Sync Ld 32 Vintagolizer 33 Tri Lead 34 Sine Lead 35 Sqr Lead 36 Evangelized 37 Stacc Heaven 38 Oct Unison 39 Tempest 40 HPF Sweep 41 BPF Saw 42 Tekno Gargle 43 Dance floor 44 Nu Trance X 45 AllinOneRiff 46 YZ Again 47 LoFiSequence 48 Strobe 49 Rhythmic 5th 50 Step Trance 51 Jazzy Arps 52 Echo Echo 53 Keep going GM2 54 Square Wave 55 MG Square 56 2600 Sine 57 Saw Wave 58 OB2 Saw 59 Doctor Solo 60 Natural Lead 61 SequencedSaw 62 Syn.Calliope 63 Chiffer Lead 64 Charang 65 Wire Lead 66 Solo Vox 67 5th Saw Wave 68 Bass & Lead 69 Delayed Lead 70 Fantasia 71 Warm Pad 72 Sine Pad 73 Polysynth 74 Space Voice 75 Itopia 76 Bowed Glass 77 Metal Pad 78 Halo Pad 79 Sweep Pad 80 Ice Rain

No. Tone name 81 Soundtrack 82 Crystal 83 Syn Mallet 84 Brightness

No. Tone name 01 Morpher 02 Alpha Said.. 03 Try This! 04 C64 Lead 05 Synchro Lead 06 TB Booster 07 Mini Growl 08 DoubleBubble 09 Periscope 10 MelodicDrums 11 Acid Lead 12 Shroomy 13 Lazer Points 14 Hot Sync 15 CerealKiller 16 Dance Steam 17 Philly Hit 18 Good Old Hit 19 2ble Action 20 In da Cave 21 Fairy's Song 22 New Planetz 23 Seq Saw 24 Repertition 25 Technotribe 26 Crunch Twin 27 Hurtling Gtr 28 Wet Nyln Gtr 29 SoftNyln Gtr 30 So good ! 31 DynoJazz Gtr 32 Clean Gtr 33 Funk Gtr 34 Nice Oct Gtr 35 Crimson Gtr 36 Plugged!! 37 Chunk Atk 38 Power Chord 39 Sitar on C 40 Elec Sitar 41 Pat is away 42 Nice Kalimba 43 Harpiness 44 Monsoon 45 Bend Koto 46 Wired Synth 47 4DaCommonMan 48 Orgaenia 49 Sleeper GM2 50 Nylon-str.Gt 51 Ukulele 52 Nylon Gt.o 53 Nylon Gt.2 54 Steel-str.Gt 55 12-str.Gt 56 Mandolin 57 Steel + Body 58 Jazz Gt. 59 Pedal Steel 60 Clean Gt. 61 Chorus Gt. 62 Mid Tone GTR 63 Muted Gt. 64 Funk Pop 65 Funk Gt.2 66 Jazz Man 67 Overdrive Gt 68 Guitar Pinch 69 DistortionGt 70 Feedback Gt. 71 Dist Rtm GTR 72 Gt.Harmonics 73 Gt. Feedback 74 Santur 75 Atmosphere 76 Harp 77 Yang Qin 78 Goblin 79 Sitar 80 Sitar 2

No. Tone name 81 Banjo 82 Shamisen 83 Koto 84 Taisho Koto 85 Kalimba 86 Gt.FretNoise 87 Gt.Cut Noise 88 String Slap 89 Breath Noise 90 Fl.Key Click 91 Seashore 92 Rain 93 Thunder 94 Wind 95 Stream 96 Bubble 97 Bird 98 Dog 99 Horse-Gallop 100 Bird 2 101 Telephone 1 102 Telephone 2 103 DoorCreaking 104 Door 105 Scratch 106 Wind Chimes 107 Helicopter 108 Car-Engine 109 Car-Stop 110 Car-Pass 111 Car-Crash 112 Siren 113 Train 114 Jetplane 115 Starship 116 Burst Noise 117 Applause 118 Laughing 119 Screaming 120 Punch 121 Heart Beat 122 Footsteps 123 Gun Shot 124 Machine Gun 125 Lasergun 126 Explosion

SYNTH FX/GUITAR

Loop Mix Set List

Loop mix set name

Tone name

1 DRUM

2 BASS

3 PART A

4

PART B

5 PART X

Key Tempo

01: Trance Dance Kit 2 Mini Like! Hot Sync (FX/GUITAR)

Synthi Fizz (SYNTH)

DC Triangle (SYNTH)

JP Strings (STRINGS) sin(EP) (PIANO) Piano+Str (PIANO)

Cm 128

02: Funk (*1) Pop Kit 1 SH Sawtooth DetuneSawBrs (BRASS)

Pure EP Trem (PIANO)

Crunch Twin (FX/GUITAR)

Saw Keystep (SYNTH) Full Strings (STRINGS) B Organ (ORGAN)

Dm 116

03: House Dance Kit 2 Garage Bass Piano+Pad (PIANO)

JP OctAttack (SYNTH)

Synthi Fizz (SYNTH)

Reso Pad (STRINGS)

Pure EP Trem (PIANO)

Cm 120

04: Drum N Bass Dance Kit 2 MKS-50 SynBs Tempest (SYNTH) Synchro Lead (FX/GUITAR)

Sqr-Sequence (SYNTH)

SoftSynBrass (BRASS) Pure EP Trem (PIANO) Piano+Pad (PIANO)

Cm 175

05: Neo HipHop (*1) HipHop Kit Ulti Ac Bass Wurly Trem (PIANO)

BreakOut Key (BRASS)

Gwyo Press (SYNTH)

Funk Gtr (FX/GUITAR) Philly Hit (FX/GUITAR) String Ens (STRINGS)

C 100

06: Pop (*1) Rock Kit A Big Pick Anadroid (SYNTH) Pop Bell (PIANO) Crimson Gtr (FX/GUITAR)

Jazzy Arps (SYNTH) Symphonika (STRINGS) R&B Organ 2 (ORGAN)

Cm 119

07: Bright Rock (*1) Rock Kit A Big Pick Clean Gtr (FX/GUITAR)

Plugged! (FX/GUITAR)

HPF Sweep (SYNTH)

Chunk Atk (FX/GUITAR) Rokkin Pf (PIANO) HArdRockOrg (ORGAN)

C 180

08: Trap Step Dance Kit 2 MKS-50 SynBs C64 Lead (FX/GUITAR)

Hot Coffee (SYNTH)

Pure Square (SYNTH)

Digi-vox Syn (SYNTH) Horny Sax (BRASS) Vintage Tine (PIANO)

Cm 152

09: Future Bass (*1) Dance Kit 2 SH Square J-Pop Brass (BRASS)

Syn Lead 2 (SYNTH)

sin(EP) (PIANO)

Try This! (FX/GUITAR) 50SteelDrms (PIANO) Pizzicato (STRINGS)

Am 120

10: Trad HipHop R&B Kit Finger Bs Staccato (STRINGS)

StageGrand (PIANO)

BreakOut Brs (BRASS)

2ble Action (FX/GUITAR) Soap Opera (ORGAN) Dual Profs (SYNTH)

Cm 96

11: EDM Dance Kit 2 DCO Bass JP OctAttack

(SYNTH) Synchro Lead (FX/GUITAR)

Octa Juice (SYNTH)

DC Triangle (SYNTH) B Org (ORGAN) Layers (PIANO)

Cm 132

Loop mix set name

Tone name

1 DRUM

2 BASS

3 PART A

4

PART B

5 PART X

Key Tempo

12: R&B HipHop Kit Oil Can Bass Repertition (FX/GUITAR)

Mellow Tune (PIANO)

Morpher (FX/GUITAR)

Alpha Said (FX/GUITAR) Super Syn Str (STRINGS) R&B Organ2 (ORGAN)

B 110

13: Reggaeton (*1) HipHop Kit SH Square SA Dance Pno (PIANO)

Wet Nyln Gtr (FX/GUITAR)

Try This! (FX/GUITAR)

Digitaless (SYNTH) Accordion Fr (ORGAN) Nu Trance X (SYNTH)

Dm 100

14: Cumbia Pop Kit 1 FingerMaster Rokkin pF (PIANO) Chorus Gt. (FX/GUITAR)

Chorus Or.2 (ORGAN)

Brass 1 (BRASS) Accordion Fr (ORGAN) Tenor Sax (BRASS)

Cm 180

15: ColombianPop Pop Kit 1 FingerMaster So good ! (FX/GUITAR)

Accordion Fr (ORGAN)

OrchestraHit (STRINGS)

BreakOut Brs (BRASS) Chorus Or.2 (ORGAN) Stacc Heaven (STRINGS)

C 106

16: Bossa Lounge R&B Kit Garage Bass TEL Stage EP (PIANO)

DynoJazz Gtr (FX/GUITAR)

Tronic Str (STRINGS)

Rokkin pF (PIANO) Ethnic Lead (BRASS) String Ens (STRINGS)

C 78

17: Arrocha Pop Kit 1 FingerMaster Phase EP (PIANO) Smoky Organ (ORGAN)

Marimba w (PIANO)

Clean Gtr (FX/GUITAR) BrassPartOut (BRASS) String Ens (STRINGS)

C 135

18: Drumn Bossa Dance Kit 2 Foundation HPF Sweep (SYNTH)

Wet Nyln Gtr (FX/GUITAR)

Harmon Mute (BRASS)

Sine Lead (SYNTH) In da Cave (FX/GUITAR) Jazz Scat (ORGAN)

D 169

19: Bahia Mix Pop Kit 1 Return2Base Phase EP (PIANO) D.Bar Org 1 (ORGAN)

Marimba (PIANO)

Crunch Twin (FX/GUITAR) BrassPartOut (BRASS) String Ens (STRINGS)

C 85

20: Power Rock Rock Kit Cmpd Fng Bs Hurtling Gtr (FX/GUITAR)

Plugged (FX/GUITAR)

Fairy Piano (PIANO)

Power Chord (FX/GUITAR) Tekno Gargle (SYNTH) HardRock ORG (ORGAN)

Am 154

21: Classic Rock Pop Kit 1 A Big Pick Rokkin pF (PIANO) R&B Organ2 (ORGAN)

BreakOut Brs (BRASS)

Blues Harp (ORGAN) Plugged (FX/GUITAR) Clean Gtr (FX/GUITAR)

C 72

22: J-P