Roland MDS-12X Owner's Manual PDF

1 of 2
1 of 2

Summary of Content for Roland MDS-12X Owner's Manual PDF

Drum Stand MDS-12X

TDM

120 1.3

1,2007001,100mm

1,5001,2001,250mm

38.1mm

22.2mm

16.8kg

1 7

B600mm L550mm

CR

A

B L600mm550mm

C R

D 300mm

E 625mm

F 650mmL

G 650mmR

H 520mm

I 3

J 2

K 2

L 22

600mm

550mm

A B

C

E

D

F G H I J K

L

KIK SNR T1 T2 T3 HH HHC

KICK SNARE TOM1 TOM2 TOM3 HI-HAT HHCTRL

CR1 CR2 RD RDE AX1 AX2

CRASH1 CRASH2 RIDE EDGE AUX1 AUX2

* 5 1 0 0 0 1 2 3 9 3 - 0 1 *

2009 RolandV-Drums

L

K

K L

A B

B

C

E

D

F G

H

I

I

I

J J

4

3

1

2 5

6

7

L

1.3 m

120 120

Drum Stand Owners ManualMDS-12X

Important in Setting Up the Stand

** Make sure to firmly tighten all hand knobs and bolts after you have assembled the stand and attached any components. You should probably also try to make a habit of checking and retightening them if necessary before every performance. You risk injury if you have loose screws or clamps, since a pad or component can fall unexpectedly.

** When setting up or storing the stand, be careful not to pinch your hands or fingers in the stand joints.

** Do not apply undue force to the hand knobs, pipes, mounts, etc.

** Do not open the stand wider than 120 degrees outward. Be sure the

two pipes at the ends tare no more than 1.3 meters apart. Doing so

can damage the cables inside the stand or cause the stand to fall over.

** Never pull on any cables with excessive force.

** There are labels on the ends of the cables allowing easy connection

to your sound module.

For about connections, refer to the owners manual that came with

your sound module.

The names on the labels correspond to trigger input jack names as follows.

(input names shown here are for the TD-12 modules)

Before using this unit, carefully read the sections entitled: USING THE UNIT SAFELY and IMPORTANT NOTES (separate sheet). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owners manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference.

Setting Up The Stand

Components

Main Features Fully Assembled View

View of Stand When Spread Open

Specifications

** We recommend using an optional Roland drum mat (TDM series) to prevent scarring or discoloration of

flooring by the rubber feet of the stand.

View of Stand When Spread Open

* A very solid and stable stand featuring ball clamps that allow precise adjustments for all pads and cymbals.

* Cables are inside the pipes, providing a clean look and quick breakdown or setup.

1.3 m (51-3/16)

120 120

Required Space for Set-up 1,200 (W) x 700 (D) x 1,100 (H) mm / 47-1/4 (W) x 27-9/16 (D) x 43-5/16 (H) inches (Drum Stand only) 1,500 (W) x 1,200 (D) x 1,250 (H) mm / 59-1/16 (W) x 47-1/4 (D) x 49-1/4 (H) inches (including Sound Module, Kick Pad, Cymbals and Stool)

Tube Diameter Stand: 38.1 mm / 1-1/2 inches Pad Arm/Cymbal Arm: 22.2 mm / 7/8 inches

Weight 16.8 kg / 37 lbs 1 oz (including Pad Mounts and Cymbal Mounts)

* In the interest of product improvement, the specifications and/ or appearance of this unit are subject to change without prior notice.

Working in order, following numbers 17 in the illustration, attach the curved pipes to the straight pipes.

** Of pipes B, the long one (600 mm) is Curved Pipe L, and the short one (550 mm)

is the Center Pipe.

** Do not pass any cables through pipe C (Curved Pipe R).

A Sound module mounting pipe (including the mounting plate)

B Curved pipe L 600mm, Center pipe 550 mm (connection cables are inside)

C Curved pipe R

D Snare pipe 300 mm

E Straight pipe 625 mm

F Straight pipe 650 mm L

G Straight pipe 650 mm R

H Straight pipe 520 mm

I Cymbal arm x 3

J Pad arm x 2

K Holder x 2

L Pad mount x 2, Memory lock (for pad mount) x 2

Drum key Cable clip Owners manual (this leaflet)

Label KIK SNR T1 T2 T3 HH HHC

Jack KICK SNARE TOM 1 TOM 2 TOM 3 HI-HAT HH CTRL

Label CR1 CR2 RD RDE AX1 AX2

Jack CRASH1 CRASH2 RIDE EDGE AUX 1 AUX 2

Cable

Use the cable clips as shown below, to secure the cables.

Cable clip

600 mm

550 mm

Height memory

Label

A B

C

E F G H I J K

L

* Position the cable in front

* Align to position of Height Memory

A B

B

C

E

D

F G

H

I

I

I

J J*

* Align to position of Height Memory

* 5 1 0 0 0 1 2 3 9 3 - 0 1 *

Copyright 2009 ROLAND CORPORATION

All rights reserved. No part of this publication may be reproduced in

any form without the written permission of ROLAND CORPORATION. Roland and V-Drums are either registered trademarks or trademarks of Roland

Corporation in the United States and/or o

Manualsnet FAQs

If you want to find out how the MDS-12X Roland works, you can view and download the Roland MDS-12X Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Roland MDS-12X as well as other Roland manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Roland MDS-12X. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Roland MDS-12X Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Roland MDS-12X Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Roland MDS-12X Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Roland MDS-12X Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Roland MDS-12X Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.