RCA ROKU TV RHOR406 TV User Guide PDF
Summary of Content for RCA ROKU TV RHOR406 TV User Guide PDF
User Guide
Models:RHOR406
English
Illustrations in this guide are provided for reference only and may differ from actual product appearance.
Product design and specification may be changed without notice.
2
Safety instructions WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into our outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15) To prevent the spread of fie, keep candles or other open flames way from this product at all
times.
16) The ventilation should not be impeded by covering the ventilation openings with items, such
as newspapers, tablecloths, curtains, etc
3
17) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids,
such as vases, should not be placed on the apparatus.
18) When you install your TV, maintain a distance of at least 4 inches between the TV and other
objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper
ventilation may result in a fire or a problem with the product caused by an increase in its
internal temperature.
19) Attention should be drawn to the environmental aspects of battery disposal. Dont throw
used batteries in dustbin.
20) An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits, as contact with them might be fatal.
21) Do not overload wall outlets and extension cords, as this can result in a risk of fie or electric
shock.
22) Do not push objects through any openings in this unit, as they may touch dangerous voltage
points or short out parts that could result in fie or electric shock. Never spill or spray any type
of liquid into the unit.
23) If an outside antenna or cable system is connected to the unit, be sure the antenna or cable
system is grounded to provide some protection against voltage surges and built-up static
charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information
with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements for the grounding
electrode.
24) When replacement parts are required, be sure the service technician uses replacement parts
specified y the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fie, electric shock or other hazards.
25) Upon completion of any service or repairs to this unit, ask the service technician to perform
safety checks to determine that the unit is in proper operating condition.
26) When you connect the product to other equipment, turn off the power and unplug all of the
equipment from the wall outlet. Failure to do so may cause an electric shock and serious
personal injury. Read the owner's manual of the other equipment carefully and follow the
instructions when making any connections.
27) Do not allow the product to output distorted sound for an extended period of time. It may
cause speaker overheating and fie.
28) This reminder is provided to call the cable TV system installers attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical.
29) Sudden high volume sound may cause hearing or speaker damage. When you use
headphones, (if the unit is equipped with a headphone jack) keep the volume at a moderate
level. If you use headphones continuously with high volume sound, it may cause hearing
damage.
30) The mains plug is used as the disconnect and shall remain readily operable.
4
31) The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such
as sunshine, fire or the like.
32) This equipment is a Class or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
33) The use of apparatus in moderate climates.
Operating Temperature: 5C to 35C Operating Humidity: 80% Storage
Temperature: -15C to 45C Storage Humidity: 90%
HOW TO HANDLE THE LCD PANEL
Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury
may occur.
If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel.
This may cause skin inflammation.
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the
liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15
minutes or longer in clean water.
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel
for long periods of time, the image can become permanently engrained in the LCD Panel and
cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR
WARRANTY. Never leave your LCD Panel on for long periods of time while it is displaying the
following formats or images:
Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9)
media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style
(4:3) media on a widescreen (16:9) display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction but technical limitation. Therefore we
disclaim any responsibility for these symptoms.
LCD Panels are manufactured using an extremely high level of precision technology, however
sometimes parts of the screen may be missing picture elements or have luminous spots.
Do not install the LCD Panel near electronic equipment that produces electromagnetic waves.
Some equipment placed too near this unit may cause interference.
Effect on infrared devices There may be interference while using infrared devices such as
infrared cordless headphones.
Power source
This television is designed to operate on 120 volts 60 Hz, AC current. Insert the power cord into a
120 volts 60 Hz outlet.
To prevent electric shock, do not use the televisions (AC) plug with an extension cord, receptacle,
or other outlet unless the blades can be fully inserted to prevent blade exposure.
Never connect the television to 50 Hz, direct current, or anything other than the specified
voltage.
Warning
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Caution
Never remove the back cover of the television as this can expose you to very high voltages and
other hazards. If the television does not operate properly, unplug the television and call your
authorized dealer or service center. Adjust only those controls that are covered in the
instructions, as improper changes or modifications not expressly approved by RCA could void the
users warranty.
5
PERSONAL SAFETY NOTICE
ALWAYS read and follow all instructions for the installation and use of the TV.
Place the TV in a location that is level and sturdy.
DO NOT place the TV on a furniture with drawers that can be used as steps by small children.
DO NOT allow children to pull the TV or climb on the furniture where the TV is placed.
DO NOT allow children to play in front of or around the TV.
ALWAYS route all the cables connecting to the TV so the cables cannot be easily pulled and
grabbed by children.
When installing the TV on a wall, please purchase a TV mount recommended by a professional
TV installer, and follow the installation instructions that come with the TV mount.
Before installing the TV on a wall, please check to make sure the wall structure can support the
weight of the TV and the mount. If in doubt, please ask the advice from a professional TV
installer.
FCC Statement Note: This equipment has been tested and found to comply with the limits for a class B digital
Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio Communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment.
The Wi-Fi Module complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This device should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
This Class B digital apparatus complies with Canadian ICES-003.
Declaration of Conformity
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2)This device must accept any interference received, including interference that may cause undesired operation
6
Attach the TV stand or wall mount bracket (not included)
Attach the TV Stand
CAUTION:
Be sure to disconnect the AC power cord before installing a stand or wall mount brackets.
The LED display is very fragile and must be protected at all times when installing the legs that
form the stand. Be sure to protect the TV screen from getting scratched or damaged by any hard
objects. In addition, DO NOT exert pressure on the front of the TV at any time because it could
crack.
To attach the left and right legs that forms the stand:
1. Carefully place your TV face down on a soft, flat surface to prevent damage to the TV or
scratching to the screen.
2. Place the legs into the bottom slots of the TV, insert and tighten the screws (found in the
accessories bag) in the circled area with the screwdriver (not provided).
3. The the TV is ready for use.
NOTE: Be sure to follow the above instructions. Insufficient tightening or incorrect installation of the stand will not support your TV correctly, and could result in damage or injury from tip- over.
7
Attach the Wall Mount Bracket (not included)
Before you begin the third-party manufacturer instructions, be sure to do the following things:
1. Place the TV face down on a clean, safe and cushioned surface.
2. Remove the TV stand if you already attached it.
3. Place the spacers (not included) in the corresponding bracket holes.
CAUTION:
When you attach the mount, be sure to use the spacers ( provided by the third-party manufacturer ) between the TV and the bracket.
To prevent internal damage to the TV and ensure it is mounted securely, be sure to use fixing screws (not provided) that are 10 mm in length when measured from the attaching surface of the mounting hook.
Wall mount hole pattern VESA (mm) 200 200
Wall mount screw size (mm) M6
Follow instructions provided with the wall mount bracket.
To complete the installation, please contact the wall mount manufacturer or the retailer from
which you purchased the TV.
The selected screws are 10 mm in length when measured from the attaching surface of the rear
cover. The diameter and length of the screws differ depending on the wall mount bracket model.
NOTE: The diameter and length of the screws differ depending on the wall mount bracket model.
10 mm
Wall mount bracket
Screw
Spacer Rear cover of the TV
8
Connect your TV
Connecting an antenna, cable, or satellite box
If you are using an antenna, CATV cable without a set-top box, or a cable or satellite box that has
only an antenna output, connect a 75-ohm coaxial cable (not provided) from the device to the
ANT/CABLE input on the TV.
Tip: If you are using an antenna with a 300 ohm twin-lead cable, you need to use a 300-75 ohm
adapter (not provided) to adapt the cable to a connection that is compatible with the TVs antenna
input.
TV label Port Cable External Equipment
AIR/CABLE
Tip: If you receive your TV stations through a set top box from a cable or satellite TV provider,
connect it to the TV using the best connection method available. From most to least desirable:
HDMI input Digital HD and SD video
AV input analog SD video
Antenna input analog SD video using NTSC
Connecting a component with a composite AV video cable
If the best connection available on your component is AV or composite video output, connect it to
the TV using a composite AV cable (not provided). Composite AV cables typically have three RCA-
type plugs on each end, color coded as follows:
Yellow: Video
Red: Audio, right channel
White or black: Audio, left channel
Connect each plug to the corresponding connector on the component and on the TV.
TV label Port Cable External Equipment
AV IN
VIDEO
AUDIO- L
AUDIO- R
Antenna RF Out
Yellow
White
Red
VCR
DVD Player/Recorder
Set-top Box
9
Connecting a component with an HDMI cable
If possible, connect your devices using HDMI cables (not provided). They help to provide the best
video quality and also carry audio signals, so that only one cable is needed. For better picture
quality, we recommend that you use cables designated as High Speed HDMI cables.
Tip: You might need to configure the component to send its signal through its HDMI connector.
The connector labeled HDMI (ARC) has the additional ability to use the audio return channel to
send digital audio to a receiver or sound bar.
TV label Port Cable External Equipment
HDMI IN
Connecting headphones or analog sound bar
You can connect headphones or an analog sound bar (not provided) to the TVs headphone jack.
Tip: Inserting a plug in the headphone jack disables the sound from the TVs built-in speakers.
[[Partner-specific illustration showing headphone connection]]
Warning: Loud noise can damage your hearing. When using headphones, use the lowest volume
setting on your headphones that still lets you hear the sound.
TV label Port Cable External Equipment
Headphones
Connecting an AV receiver or digital sound bar
You can enjoy Dolby Digital multichannel sound from your TV if you connect a digital amplifier or
sound bar (not provided) in either of two ways:
OPTICAL (Digital audio out) Connect an optical cable (not provided) from an external digital
audio system.
VCR
DVD Player/Recorder
Set-top Box
Satellite Receiver
Satellite antenna cable
10
HDMI ARC Connect an HDMI cable (not provided) from the HDMI (ARC) connector to the
HDMI input on your receiver or sound bar. This connection uses the Audio Return Channel
(ARC) feature of the HDMI specification to output sound from the TV to a compatible device.
To use this feature, you must configure the TV to enable HDMI ARC.
TV label Port Cable External Equipment
OPTICAL
HDMI /ARC
Preparing for Internet connectivity
Connecting to a Wireless Network
Connect it to the Internet through a wireless modem/router or a wireless access point (not
provided). The TV has a built-in wireless LAN adapter.
Connect your TV to your network wirelessly, you need a wireless router or modem. See the
illustration below.
NOTES:
The TV supports only its internal wireless network adapterit does not support the use of a
USB network adapter. For the best viewing experience, we recommend using a wireless router
or access point that supports the following wireless networking standards, depending on your
TV model:
If the wireless router supports DHCP, your TV can connect more easily to the wireless
network.
If you apply a security system other than the systems listed below, it will not work with the
Speaker
Audio Amplifier / Sound Bar
Bar
Audio Amplifier
11
TV.
Security system: WPA, WEP, WPA2.
AC power
Plug your TV into a power outlet. You can tell that the TV has power because the status light on the
front of the TV lights up.
Remote control batteries
Open the back of your Roku TV remote control and insert the included batteries as indicated in the
label in the battery compartment. Reattach the back cover.
IMPORTANT NOTICE:
Depending on the country where the TV is installed, certain Roku channels may not be available.
The quick launch buttons on the remote control associated with those channels will therefore not
work. All other functionalities of the remote will work as designed.
Roku TV User Guide Detailed instructions on using your RCA Roku TV are available in the Roku TV User Guide that
is available as a PDF file. To obtain your copy of the user guide:
1. From your computer or mobile device, go to http://go.roku.com/tvmanual. The page,
How to set up your Roku TV opens.
2. Click the Roku TV User Guide link in this article to download the user guide.
3. If the user guide does not open automatically after the download completes, go to your
browsers download location and open Roku-TV-User-Guide-n-n.pdf. (n-n represents the
current version number of the Roku TV software described in the user guide.)
12
FAQ When you experience an issue with your TV, turn it off and unplug it, wait 30 seconds, and then
reconnect the AC power. If this does not resolve the problem, then refer to the tips below. If the
problem is still not resolved, then contact Manufacturer Customer Care.
PROBLEM POSSIBLE SOLUTIONS
You do not see a picture when turning on the TV
If the TV is Off, check that the status LED is On. If the TV is On, press any button on the remote control to make sure it is not in power saver mode.
The TV may be in Standby mode. Press the Power button on the remote control to activate the unit from Standby.
Check if the power cord is plugged into an active electrical outlet.
You have connected an external source to your TV but cannot find it on the Home screen
Make sure your external source is turned on. Check to see if the correct input tile is selected on the Home
Screen for the external source you want to view. Make sure you have not removed the input from your Home
screen. To add it back, select Settings > TV Inputs. Check to see if the external source device connection is snug
and fully inserted into the TV port.
When you turn on your TV, there is a delay for a few seconds before the picture appears
This is normal. If you have already set up your TV, it is initializing and restoring previous setting information.
You see a normal picture but do not hear any sound
Check that volume is turned up. Check if Mute mode is ON. Turn off mute by pressing the
Mute button again, or pressing volume up. Make sure there is nothing plugged into headphone jack on
the TV. Connecting headphone to the TV will mute the main
speakers. Make sure TV speakers are enabled. To enable them, go to
Settings > Audio > TV Speakers.
You hear sound but picture color is faded or in black and white
Check that the Color value is set to 50 or greater.
Check the color on another channel or input tile.
Your sound or picture is distorted or appears wavy
Turn off and/or remove any electrical appliance that may be
nearby the TV panel.
Insert the power plug of the TV set into another power outlet.
Your sound or picture is blurry or cuts out
If you are using an external antenna, check the connections for a snug and tight fit.
Adjust or reposition the antenna placement. You are too far from the TV station to receive a satisfactory
signal. Consider hiding the channel by going to Settings > TV inputs > Antenna TV > Edit channel lineup.
You see horizontal/vertical stripes on the picture, or it is shaking
Turn off and/or remove any electrical appliance that may be nearby the TV panel.
Insert the TV power cord into another electrical outlet.
You cannot connect to your wireless network
Make sure you have selected the correct wireless network name on the Choose Wireless Network screen.
Make sure that you entered the correct wireless password
13
For the latest answers to Frequently Asked Questions, visit the Roku support website
(www.roku.com/support).
Specifications
Disclaimer: All product, product specifications, and data are subject to change without notice to
improve reliability, function, design or otherwise.
for your network (passwords are case sensitive). If you have turned off SSID broadcasting on your wireless
router, add your network by selecting Add Private Network from the Select Wireless Network screen.
To check if it is a password problem, temporarily disable security on the wireless router.
If you are not getting 3 or more signal strength bars above the wireless network icon, adjust the position of the TV (if possible) or the wireless router. Even a few inches in one direction or another may help.
Your remote control is not responding to button presses
Check that the TV is still on. Check that the batteries are good and are inserted properly. Check that there are no obstacles between the remote
control and the front of the TV. Try moving closer to the TV. If the LED on the TV flashes
when you press any of the buttons on the remote control, the issue is not with the remote control.
If all of these measures fail, try unplugging the TV, waiting 30 seconds, and then reconnecting AC power.
Model Name RHOR406
Dimension (W H D)
Without Stand
35.6 x 20.3 x 3.2 inches (904 x 516 x 80 mm)
With Stand 35.6 x 22.2 x 7.1 inches (904 x 563 x 180 mm)
Weight Without Stand
11.7 lbs (5.3kg)
With Stand 11.9 lbs (5.4kg)
Active Screen Size (Diagonal)
39.5 inches
Screen Resolution 1920 1080 Audio Power 8 W + 8 W Rated Power Consumption 65 W Standby Power consumption
<0.5 W
Power Supply 120 V ~ 60 Hz
Refresh rate HDMI Input 480i / 60HZ, 720p / 60Hz, 1080i / 60Hz, 1080p /60Hz,
Receiving systems
Analog NTSC
Digital ATSC
Ports 3 HDMI ports, 1 USB ports,1 Optical Output, 1 RF Input, 1 Earphone Audio Output, 1RCA Composite Video Input,1 left/right Audio Input for Composite
Other features Smart TV, Dynamic contrast picture, VESA standard wall mount support
14
Service and warranty information To make a warranty claim, please email support@curtiscs.com or call 1-800-968-9853.
1 Year Warranty
This product is warranted to be free from defects in material and workmanship for a period of one
(1) year from the date of original purchase. During this period, your exclusive remedy is repair or
replacement of this product or component found to be defective, at our option; however, you are
responsible for all costs associated with returning the product to us. If the product or component
is no longer available, we will replace with a similar one of equal or greater value. Prior to a
replacement being sent, the product must be rendered inoperable or returned to us.
This warranty does not cover glass, filters, wear from normal use, use not in conformity with the
printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse.
This warranty extends only to the original consumer purchaser or gift recipient. Keep the original
sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the
product is used for other than single-family household use or subjected to any voltage and
waveform other than as on the specified rating on the label (e.g., 120V~60Hz).
We exclude all claims for special, incidental, and consequential damages caused by breach of
express or implied warranty. All liability is limited to the amount of the purchase price. Every
implied warranty, including any statutory warranty or condition of merchantability or fitness for
a particular purpose, is disclaimed except to the extent prohibited by law, in which case such
warranty or condition is limited to the duration of this written warranty. This warranty gives you
specific legal rights. You may have other legal rights that vary depending on where you live. Some
states or provinces do not allow limitations on implied warranties or special, incidental, or
consequential damages, so the foregoing limitations may not apply to you.
For faster service, locate the model, type, and serial numbers on your appliance.
90 Day Warranty
Remote controls are warranted from date of purchase for a period of ninety (90) days, provided
remote has been used as intended and free from damage.
ATTACH YOUR PROOF OF PURCHASE HERE, PROOF OF PURCHASE IS REQUIRED TO OBTAIN
WARRANTY SERVICE.
Please have the following information available when you contact the Support Team:
Name, address and telephone number.
Model number and serial number.
A clear, detailed description of the problem.
Proof of purchase including dealer or retailer name, address and date of purchase.
15
Dolby Digital
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
HDMI
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Roku
ROKU, ROKU TV and the ROKU logo are the trademarks or registered trademarks of Roku, Inc. All other trademarks and logos herein are the property of their respective owners.
RCA
RCA, the RCA logo, the two dogs (Nipper and Chipper) logo, are registered trademarks or trademarks of RCA Trademark Management and are used under license by Curtis International Ltd.
Any other product, service, company, trade or product name and logo referenced herein are neither endorsed or sponsored by RCA Trademark Management or its affiliates.
2
Manuel Utile
Modles:RHOR406
Franais
Les illustrations dans ce mode demploi sont seulement pour votre rfrence et peuvent
diffrer de lapparence du produit rel.
La conception et les spcifications du produit peuvent tre modifies sans pravis.
3
Consignes de scurit AVERTISSEMENT:
AFIN DE REQUIRE LES RISQUES DE CHOC ELECTRIQUE, NE RETIREZ PAS LE COUVERCLE (OU LE PANNEAU ARRIERE). AUCUNE PIECE NE PEUT ETRE REPAREE PAR LUTILISATEUR. CONFIEZ LAPPAREIL A UN TECHNICIEN QUALIFIE.
Le symbole reprsentant un clair dans un triangle quilatral a pour but davertir lutilisateur du danger prsent par des pices non isoles lintrieur de lappareil et dont la tenstion est suffisante pour provoquer des dcharges lectriques dangeruses. Le point dexclamation dans un triangle quilatral a pour but davertir lutilisateur que des instructions importantes relatives lutilisation et lentretien se trouvent dans le manuel accompagnant lappareil.
IMPORTANT SAFETY INSTRUCTIONS 1) Lisez ces consignes.
2) Gardez ces consignes.
3) Conformez-vous tous les avertissements.
4) Suivez toutes les consignes applicables.
5) Nutilisez pas cet appareil prs de leau.
6) Nettoyez uniquement Iaide dun chiffon sec
7) Nobstruez jamais les orifices daation de lappareil et installez-le en conformit avec les
instructions du fabricant.
8) Ninstallez pas lappareil proximit dune source de chaleur telle que radiateurs, registres
de chaleur, poles ou autre appareil (y compris les amplificateurs) qui poduit de la chaleur.
9) Nallez pas lencontre de Iobjectif de scurit de la fiche polarise ou vec mise la terre.
Une fiche polarise a deux lames, une tant plus large que Iautre. Une fiche vec mise la
terre a deux lames et une troisime broche de terre. La lame large ou la troisime broche est
destine vous protger. Si la fiche ournie ne sinsre pas dans votre prise, contactez un
lectricien pour faire remplacer la prise dsute.
10) Empchez Ie cordon dtre pitin ou pinc, surtout aux fiche, prises de courant, et au point
de leur sortie de Iappareil.
11) Utilisez uniquement les accessoires prciss par Ie fabricant.
12) Nutilisez cet appareil quavec un chariot, un socle, un trpied, une console ou
une table conu pour supporter le poids et la taille de lappareil. Si vous utilisez
un chariot, manuvrez avec prcaution lensemble chariot/appareil pour viter
toute blessure rsultant dun basculement.
13) Dbranchez cet appareil durant les orages lectriques ou lorsquil nest pas utilis pendant
des priodes prolonges.
14) Confiez tout la rpaation de cet appareil du personnel qualifi Une rparation peut tre
requise lorsque lappareil a te endommag de quelque manire que ce soit, tel quun
cordon ou une fiche endommag, du liquide ders ou des objets tombs dans Iappareil,
Iappareil a t expos la pluie ou a Ihumidit, un appareil qui ne fonctionne pas
normalement ou qui est tomb.
15) Pour viter la propagation du feu, garder les chandelles ou autres flammes vives loignes de
ce produit tout moment.
16) La ventilation ne doit pas tre gne en recouvrant les orifices d'aration avec des objets tels
que journaux, nappes, rideaux, etc.
17) Lappareil ne doit pas tre expos des gouttements deau ou des claboussures, et de plus
aucun objet rempli de liquide, tel que des vases, ne doit tre plac sur Iappareil.
4
18) Lorsque vous installez votre tlviseur, maintenez une distance d'au moins 10cm entre
l'appareil et les objets environnants (murs, parois de meubles, etc) afin d'assurer une bonne
ventilation. Le fait de ne pas assurer une bonne ventilation peut conduire un incendie ou
des problmes de l'appareil, causs par une augmentation de sa temprature interne.
19) Prtez une attention la protection de lenvironnement lors de llimination des piles uses.
Ne pas jeter les piles uses dans la poubelle.
20) Lantenne extrieure ne doit pas tre place proximit de lignes dalimentation ariennes
ni de circuits lectriques, ni de telle faon quelle puisse toucher ces lignes ou fils en tombant
Faites preuve dextrme prudence pendant linstallation dune antenne extrieure et veillez
ne pas toucher ces lignes ou circuits car leur contact peut tre fatal.
21) Ne surchargez pas les prises lectriques murales ni les cordons de rallonge, car cela risque de
causer un incendie ou des chocs lectriques. Do not overload wall outlets and extension
cords, as this can result in a risk of fie or electric shock.
22) Ninsert pas dobjets lintrieur de lappareil, car cela peut toucher des points de tension
dangereux, causer un court- circuit, un incendie ou des chocs lectriques. Ne versez, ni ne
vaporisez jamais de liquide sur lappareil.Do not push objects through any openings in this
unit, as they may touch dangerous voltage points or short out parts that could result in fie or
electric shock. Never spill or spray any type of liquid into the unit.
23) Si une antenne extrieure ou un systme de transmission par cble est reli lappareil, vous
devez vous assurer que lantenne ou le systme de transmission par cble est
convenablement mis la terre de manire tre protg, dans toute la mesure du possible,
contre les surtensions et les charges dlectricit statique. La section 810 du code national de
llectricit (ANSI/NFPA 70) vous renseigne sur les moyens appropris de mettre le mt et la
structure de support la terre.
24) Quand il est ncessaire de remplacer certaines pices de lappareil, assurez-vous que le
rparateur utilise des pices recommandes par le fabricant ou ayant les mmes
caractristiques que les pices originales. Le remplacement par des pices non autorises
peut causer un incendie, des chocs lectriques ou tre la source dautres dangers.
25) Aprs service ou rparation, demandez au technicien deffectuer des vrifications de scurit
pour sasser que lappareil soit en bon tat de fonctionnement.
26) Lorsque vous dsirez raccorder cet appareil un autre appareil, teignez toutes les appareils
et dbranchez-les du rseau lectrique. Car autrement, vous risquez de subir un choc
lectrique ou des blessures. Lisez attentivement les guides dutilisateurs accompagnant tous
les appareils et suivez les directives lorsque vous effectuez les raccordements.
27) Ne laissez pas les haut-parleurs fournir une reproduction sonore comportant de la distorsion
pendant une trop longue priode car cela risque de faire surchauffer les enceintes
acoustiques et causer un incendi.
28) Cet avis est destin informer linstallateur dune antenne extrieure que larticle 820-40 du
Code national de llectricit (NEC) fournit les directives suivre et les consignes respecter
pour effectuer une mise la tere adquate de lappareil et stipule que le dispositif de mise
la terre du cble doit tre raccord un systme de mise la terre de ldific, aussi prs
que possible de son point dentre .
29) Un haut volume de son inattendu peut endommager laudition ou les enceintes. Lorsque
vous utilisez un casque couteurs, (si lappareil est quip dune prise casque), maintenez
le volume un niveau modr. Si vous utilisez toujours un casque couteurs avec un
volume lev, cela pourrait causer des dommages auditifs.
30) La principale prise est utilise pour dconnecter et devra rester facilement accessible.
31) Les piles (le paquet de piles ou les piles installes) ne doivent pas tre exposes une
chaleur excessive comme le soleil, le feu, etc.
32) Cet appareil lectrique appartient la classe II (double isolation). Il a t conu de telle
manire qu'il ne ncessite pas une connexion de scurit la terre.
5
33) Lutilisation des appareils dans les climats modrs.
Temprature d'utilisation: de 5C 35C Niveau d'humidit d'utilisation: 80%
Temprature de stockage: de -15C 45C Niveau d'humidit de stockage:90%
PRCAUTIONS PRENDRE AVEC LCRAN Nappliquez aucune pression sur lcran LCD et ne le secouez daucune faon. Il peut causer le verre bris et des blessures peuvent survenir. En cas de bris de lcran LCD, veillez surtout ne pas toucher le liquide qui schappe de lcran. Cela pourrait irriter la peau. Si le liquide pntre dans la bouche, il faut le cracher immdiatement et consulter un docteur sans dlai. Pareillement, si le liquide entre en contact avec les yeux ou la peau, il faut tout dabord rincer grande eau les parties touches pendant au moins 15 minutes puis consultez un docteur sans tarder. EFFECTS INDESIRABLE POSSIBLE SUR ECRAN LCD: Ne figez pas dimages sur lcan LCD trop longtemps car cela peut entraner une rmanence lcranLCD, galement appele brlure dcran et peux causer des images fantmes fixe. LA GARANTIE NE COUVRE PAS LES DOMMAGES CAUSES PAR LA REMANENCE Ne jamais laisser votre cran LCD sur de longues priodes de temps lorsquil affiche lesormats suivants ou les images. Images fixes: Comme bousiers, Image de jeu vido, de PC, logo de stations de tlvision, et site web. Les formats spciaux qui ne couvrent pas lentiret de lcran LCD. Par exemple, les formats (16:9) sur un cran normal (4:3) (lignes en haut et en bas de lcran); ou les formats dimage rguliers (4:3) sur un cran large (16:9) (lignes gauche et droite de lcran). Les symptmes suivants ne sont pas dus un dfaut de lappareil mais ses caractristiques techniques. Dans les cas noncs ci-aprs, aucun recours la garantie dusine ne pourra tre rclam. Lcran LCD de ce tlviseur est constitu de cellules minces et est le fruit dune technologie trs prcise. Il peut y avoir des cellules qui nmettent pas de lumire ou qui restent allumes. Ceci nest pas d un dfaut de lappareil. Ninstallez pas le lcran LCD prs dquipement lectronique sensible aux ondes lectromagntiques. II existe de lquipement qui, trop proche de lappareil, peut gnrer des interfrences. Effet sur les priphriques infa-rouges Des interfrences peuvent tre provoques, par exemple, par lutilisation dun casque sans fil cause des rayons infra-rouges. Alimentation Ce tlviseur LCD est conu pour fonctionner sur 100-120 volts 60 Hz, courant alternatif. Insrez le cordon dalimentation dans une prise de courant 100-120 volts 60 Hz. Pour viter tout choc lectrique, nutilisez pas fiche polarise de la tlvision CD avec une rallonge, un rceptacle ou toute autre prise sauf si les lames peuvent tre insres compltement pour viter lexposition de la lame. Ne jamais raccorder la tlvision courant continu50 Hz, ou autre chose que la tension spcifi. Avertissement Pour viter tout risqu dincendie ou de choc, nexposez pas cet appareil la pluie ou un environnement humide.
Mise en garde
Ne retirez jamais le couvercle arrire du tlviseur car vous seriez ainsi expos des risques de
chocs lectriques ou dangers divers. Si votre appareil ne fonctionne pas adquatement,
dbranchez-le et contactez un marchand ou un centre de dpannage autoris. Ajuster seulement
les commandes que sont traites dans les instructions, comme une mauvaise changements ou
modifications non xpressment approuvs par Hitachi pourraient annuler la garantie de
lutilisateur.Rgler uniquement les commandes qui sont illustres dans les directives; les
modifications ou changements qui ne sont pasexpressment approuvs par Hitachi pourraient
retirer le droit dusage de lutilisateur.
6
Avis de scurit personnelle Toujours lire et suivre toutes les instructions pour l'installation et l'utilisation dutlviseur. Placez le tlviseur dans un endroit de niveau et solide.
Ne placez pas le tlviseur sur un meuble avec des tiroirs qui peuvent tre utiliss comme marches par les petits enfants.
Ne laissez pas les enfants tirer sur le tlviseur ou monter sur les meubles o le tlviseur est plac.
Ne laissez pas les enfants jouer devant ou autour du tlviseur.
Acheminez toujours tous les cbles connects au tlviseur afin que les cbles ne puissent pas tre facilement tirs et saisis par les enfants.
Lors de l'installation du tlviseur sur un mur, veuillez acheter une monture TV recommande par un installateur de tlvision professionnel et suivre les instructions d'installation fournies avec la monture TV.
Avant d'installer le tlviseur sur un mur, assurez-vous que la structure du mur peut supporter le poids du tlviseur et du support. En cas de doute, s'il vous plait demander les conseils d'un installateur de tlvision professionnel.
Avertissment de la FCC Note: Cet appareil a t test et est en conformit avec les limites dun appareil numrique de
classe B en vertu de la partie 15 des rglements de la FCC. Ces limites sont destines fournir
une protection raisonnable contre linterfrence humaine dans une installation rsidentielle. Cet
appareil gnre, utilise et peut mettre lnergie de frquences radio et, sil nest pas install et
utilis en accord avec les instructions, pourrait causer des interfrences nuisibles pour les
communications radio.
Cependant, il nexiste pas de garantie que linterfrence nadviendra pas sur une installation en
particulier. Si cet appareil ne cause pas dinterfrence nuisible pour une rception radio ou
tlvision, qui peut tre dtermine par lallumage ou non de lappareil, lutilisateur est
encourag corriger les interfrences en suivant une ou plusieurs des mesures suivantes :
Rorienter ou replacer lantenne.
Augmenter la sparation entre lappareil et le recepteur.
Connecter lappareil dans une prise dun circuit diffrent que celui du rcepteur.
Consulter le dtaillant ou un technicien expriment radio/TVpour une assistance.
NOTE: Le fabricant nest pas responsable des interfrences radio ou TV causes par des modifications non-autorises dquipements. De telles modifications pourrait annuler lautorit de lutilisateur doprer sur lquipement.
Le module Wifi est en conformit avec les limites de la FCC relatives lexposition aux
rayonnements pour un environnement non-contrl. Cet appareil doit tre install et mis en
service une distance minimum de 20 cm entre le radiateur et votre corps.
Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.
Dclaration de conformit
Cet appareil est conforme la partie 15 de la rglementation de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) Ce dispositif ne doit pas causer d'interfrences nuisibles et (2) Ce dispositif doit accepter toute interfrence reue, y compris les interfrences qui pourraient causer un fonctionnement non souhait.
7
Monter le support TV ou le support mural (non inclus)
Monter le support TV
AVERTISSEMENT:
Assurez-vous davoir dconnect le cordon dalimentation du secteur avant dinstaller le support
TV ou support mural
Laffichage de la LED est trs fragile et doit tre protg tout moment lorsque vous installez
les pieds qui forment le support. Assurez-vous de protger lcran TV dgratignure ou
dendommagement par des objets lourds. De plus, NE JAMAIS exercer de pression sur la face
avant de la TV car elle pourrait se casser.
Pour monter les pieds droit et gauche qui forment le support :
4. Placer avec soin la TV sur la face avant sur une surface plane et lisse, afin dempcherdes
dommages sur la TV ou des gratignures sur lcran.
5. Placer les pieds dans les fentes au bas de la TV, insrez et resserrez les vis (disponibles dans le
sachet daccessoires) dans la zone encercle laide du tournevis (non fourni).
6. La tlvision est prt tre utilis maintenant.
REMARQUE : Veuillez suivre les instructions ci-dessus. Le resserrement insuffisant ou la mauvaise installation du support ne supportera pas bien votre tlviseur et pourrait entraner des dommages ou des blessures causs par le basculement.
Monter le support mural (non inclus)
Avant de suivre les instructions du fabricant tiers, assurez-vous deffectuer les tapes suivantes
4. Placer la TV sur la face avant sur une surface propre, scurise et rembourre.
8
5. Retirer le support TV si vous lavez dj attach.
6. Placer les cales despacement (non inclus) dans les trous du support.
AVERTISSEMENT:
Lorsque vous assemblez le support, assurez-vous dutiliser les cales despacement (fournies par le fabricant tiers) tre la TV et le support.
Afin de prvenir des endommagements internes sur la TV et de scuriser son assemblage, assurez-vous dutiliser des vis de montage (non fourni) dune longueur de 10 mm de la surface au jusqu la face arrire.
Dimensions du trou norme VESA(mm) 200 200
Taille des trous de vis du support mural (mm) M6
Suivez les instructions pour le support mural
Pour complter linstallation, veuillez contacter le fabricant du support mural ou le dtaillant o
vous avez achet la TV.
Les vis slectionnes ont une longueur de 10 mm depuis la surface dattache jusqu la face
arrire. Le diamtre et la longueur des vis diffrent en fonction des modles de support muraux.
NOTE: Le diamtre et la longueur des vis diffrent en fonction des modles de support muraux.
Connexion votre tlviseur
Connexion dune antenne, un cble ou une bote satellite
Si vous utilisez une antenne, un cble CATV sans un botier dcodeur, un cble ou une bote
satellite qui na quune sortie dantenne, connectez un cble coaxial de 75-ohm (non fourni) de
10 mm
Trou de support
Vis
Cale despacement Face arrire de la TV
9
lappareil lentre ANT/CABLE sur le tlviseur.
Marque de la
TV
Port Cble Equipement externe
AIR/CABLE
Conseil : En utilisant une antenne avec un cble jumel de 300 ohm, vous devez utiliser un
adaptateur de 300-75 ohm (non fourni) pour adapter le cble une connexion qui est compatible
avec lentre de lantenne du tlviseur.
HDMI entre HD Numrique et vido SD
AV Entre vido SD analogique
Entre dantenne vido SD analogique en utilisant NTSC
Connexion dun composant avec un cble vido AV composite
Si la meilleure connexion sur votre composant est la sortie vido AV ou la sortie vido composite,
connectez-la au tlviseur laide dun cble AV composite (non fourni). Les cbles AV
composites ont gnralement trois fiches RCA-type chaque extrmit, codes par couleur
comme suit :
Jaune : Vido
Rouge : Audio, canal droit
Blanc ou noir : Audio, canal gauche
Connectez chaque fiche au connecteur correspondant sur le composant et sur le tlviseur.
Marque de la TV Port Cble Equipement externe
AV IN
VIDEO
AUDIO- L
AUDIO- R
Connexion dun composant avec un cble HDMI
Si possible, connectez votre appareil en utilisant cbles HDMI (non fournis). Ils aident fournir la
meilleure qualit vido et transporter des audio-signaux de sorte quun seul cble est requis.
Pour une meilleure qualit des images, nous vous recommandons dutiliser les cbles HDMI
grande vitesse.
Antenne RF Out
Jaune
Blanc
Rouge
VCR
DVD Player/Recorder
Dcodeur
10
Conseil : Vous devrez peut-tre configurer le composant pour envoyer son signal travers son
HDMI connecteur.
Le connecteur tiquet HDMI (ARC) a une fonction supplmentaire en utilisant le canal de retour
audio pour envoyer les audionumriques un rcepteur ou une barre de son.
Marque
de la TV
Port Cble Equipement externe
HDMI IN
Connexion du casque couteurs ou une barre de son
analogique
Vous pouvez connecter un casque couteurs ou une barre de son analogique (non fourni) la
prise du casque couteurs du tlviseur.
Conseil : Insrez une fiche dans la prise casque pour dsactiver le son des enceintes intgres du
tlviseur.
[[Lillustration spcifique au partenaire montrant la connexion des casques couteurs]]
Avertissement : Le fort bruit peut endommager votre audition. Lors de lutilisation dun casque
couteurs, tournez le volume sur un rglage le plus bas jusqu ce que vous entendiez le son.
Marque de la TV Port Cble Equipement externe
Headphones
Connexion dun rcepteur AV ou dune barre de son
numrique
Vous pouvez profiter du son multicanaux Dolby Digital de votre tlviseur si vous connectez un
amplificateur numrique ou une barre de son (non fourni) dans lune ou lautre manire :
VCR
DVD Player/Recorder
Dcodeur
Rcepteur satellite
Satellite antenne cble
11
OPTIQUE (Sortie audio numrique) Connectez un cble optique (non fourni) dun systme
audio numrique externe.
HDMI ARC Connectez un cble HDMI (non fourni) du connecteur HDMI (ARC) lentre
HDMI sur votre rcepteur ou une barre de son. Cette connexion utilise la fonction du Canal
de Retour Audio (ARC) du HDMI pour envoyer le son du tlviseur un appareil compatible.
Pour utiliser cette fonction, vous devez configurer le tlviseur pour activer HDMI ARC.
Marque de la TV Port Cble Equipement externe
OPTICAL
HDMI /ARC
Rparation pour la connectivit Internet
Se connecter un rseau sans fil
Connectez-le linternet laide dun modem/routeur sans fil ou un point daccs sans fil (non
fourni). Le tlviseur possde dun adaptateur LAN sans fil intgr.
Pour connecter votre tlviseur votre rseau sans fil, vous avez besoin dun routeur ou dun
modem. Voir lillustration suivant.
REMARQUE :
Le tlviseur supporte uniquement son adaptateur rseau sans fil interne-il ne supporte pas
lutilisation dun adaptateur rseau USB. Pour une meilleure exprience de visionnement, nous
vous recommondons dutiliser un routeur sans fil ou un point daccs qui supporte les normes
haut-
parleur
Amplificateur Audio / Sound Bar
Amplficateur Audio
12
de rseau sans fil suivantes, selon votre modle du tlviseur :
Si le routeur sans fil nest pas compatible avec DHCP, votre TV peut se connecter facilement au
rseau sans fil.
Si vous appliquez un systme de scurit autre que lun des systmes lists ci-dessous, il ne
fonctionnera pas avec la TV.
Systme de scurit : WPA, WEP, WPA2.
Puissance AC
Branchez votre tlviseur dans la prise de courant. Vous pouvez savoir le tlviseur est sous tension
lorsque le voyant situ lavant du tlviseur sallume.
Piles de la tlcommande
Ouvrez le couvercle arrire de la tlcommande de votre Roku TV et insrez les piles comprises
comme indiqu sur ltiquette du compartiment piles. Replacez le couvercle arrire en position.
Avis important:
Selon le pays o le tlviseur est install, certains canaux Roku peuvent ne pas tre disponibles.
Les boutons de lancement rapide de la tlcommande associe ces canaux ne fonctionneront
donc pas. Toutes les autres fonctionnalits de la tlcommande fonctionneront comme prvu.
Mode demploi Roku TV Les instructions dtailles en ce qui concernant lutilisation de votre RCA Roku TV sont
prsentes dans le Mode demploi en forme de fichier PDF. Pour obtenir une copie du mode
demploi :
4. A laide de votre ordinateur ou appareil mobile, accdez http://go.roku.com/tvmanual.
Ouvrez ce page How to set up your Roku TV
5. Cliquez sur le lien Mode demploi Roku TV pour tlcharger.
6. Si le mode demploi ne souvre pas automatiquement la fin du tlchargement,
accdez au lien de tlchargement et ouvrez Roku-TV-User-Guide-n-n.pdf. (n-nsignifie le
numro de la version actuelle du logiciel Roku TV dcrit dans le mode demploi.)
13
FAQ Lorsquun problme de votre tlviseur se produit, teignez-le et dbranchez-le, attendez 30
secondes, puis reconnectez lalimentation secteur. Si le problme nest pas rsolu, rfrez-vous
aux conseils ci-dessous. Si le problme persiste, contactez le service aprs-vente du client.
PROBLEMES SOLUTIONS POSSIBLE
Vous ne voyez pas dimage lorsque vous allumez la TV
Lorsque le tlviseur est teint, verifiez si le voyant LED est allum. Si le tlviseur sallume, pressez nimporte quel bouton de la tlcommande pour sassurer quil nest pas en mode dconomie dnergie.
La TV peut tre en veille. Appuyez sur le bouton Power de la tlcommande pour activer lunit.
Vrifiez que le cordon d'alimentation est branch sur une prise lectrique.
Vous avez connect une source externe sur votre TV mais vous ne la voyez pas sur lcran daccueil
Assurez-vous que la source externe est allume. Vrifiez que case approprie est slectionne sur lcran
daccueil pour la source externe que vous souhaitez faire apparatre.
Assurez-vous que vous navez pas supprim lente de votre cran daccueil. Pour ajouter, slectionnez Settings > TV Inputs.
Vrifiez si la connexion de lappareil externe est ajuste et correctement insre dans le port TV.
Lorsque vous allumez votre TV, il y a un petit dlai de quelques secondes avant que limage napparaisse
Ceci est normal. Si vous avez dj configur votre tlviseur, il initialise et rtablit les informations de configuration prcdente.
Vous voyez une image normale mais vous navez pas de son
Vrifiez que le volume est allum. Vrifiez que le mode Muet est sur On. Eteignez-le en
appuyant sur le bouton Muet de nouveau ou en augmentant le bouton.
Assurez-vous qu'il n'y a rien dans le jack dcouteur de la tlvision. La connexion des couteurs la tlvision va mettre les principaux haut-parleurs muets. Assurez-vous que les enceintes du tlviseur sont actives.
Pour les activer, accdez Settings > Audio > TV Speakers.
Vous entendez du son mais la couleur de limage est ternie ou en noir et blanc
Vrifiez que la valeur de la couleur est suprieure ou gale 50.
Vrifiez la couleur sur une autre chane ou dans une autre case dentre.
Le son ou limage est dforme
Eteignez et/ou retirez tout appareil lectrique qui pourrait tre proche de la TV.
Insrez le cble dalimentation de la TV dans une autre prise.
Limage ou le son est flou(e) ou se coupe
Si vous utilisez une antenne externe, assurez-vous que les connexions sont ajustes et serres.
Ajustez ou repositionnez lantenne. Vous tre trop loin de la station de tlvision pour recevoir un
signal satisfaisant. Si vous envisagez de cacher la chane, accdez Settings > TV inputs > Antenna TV > Edit channel lineup.
14
Pour les dernires rponses aux questions frquemment poses, visitez le site Web de support
Roku (www.roku.com/support).
Spcifications
Vous voyez des lignes horizontales/verticales sur limage,ou elles remuent
Eteignez et/ou retirez tout appareil lectrique qui pourrait se trouver prs de la TV.
Insrez le cble dalimentation de la TV dans une autre prise.
Vous ne pouvez pas connecter votre rseau Wifi
Assurez-vous davoir slectionn le bon nom de rseau sans fil depuis lcran Choisir le rseau sans fil
Assurez-vous davoir entr le bon mot de passe pour votre rseau(les mots de pass sont sensibles la case).
Si vous avez teint votre diffusion SSID sur votre routeur sans fil, ajoutez votre rseau en slectionnant Ajouter un rseau priv depuis lcran Slectionner le rseau sans fil .
Pour vrifier sil sagit dun problme, dsactiver temporairement la scurit du routeur sans fil.
Si vous ne recevez pas plus de 3 barres sur licne de Wifi, ajustez la position de la TV(sipossible) ou le routeur sans fil. Mme quelques centimtres dans une direction ou une autre peuvent aider.
Votre tlcommande ne rpond pas aux pressions sur les boutons
Vrifiez que la TV est toujours allume. Vrifiez que les piles sont en bon tat et fonctionnent
correctement. Vrifiez quil ny a pas dobstacles entre la tlcommande et
lavant de la TV. Essayez davancer plus prs de la TV. Si la LED de la TV
clignote lorsque vous appuyez sur lun des boutons de la tlcommande.
Si toutes ces mesures chouent, essayez de dbrancher le tlviseur, en attendant 30 secondes, puis reconnectez lalimentation secteur.
Nom du modle RHOR406
Dimension (W H D)
Sans support
35.6 x 20.3 x 3.2 inches (904 x 516 x 80 mm)
Avec le support
35.6 x 22.2 x 7.1 inches (904 x 563 x 180 mm)
Poids Sans support
11.7 lbs (5.3kg)
Avec support
11.9 lbs (5.4kg)
Taille de lcran actif (Diagonale)
39.5 inches
Rsolution de lcran 1920 1080 Puissance audio 8 W + 8 W Consommation lectrique 65 W Consommation d'nergie en mode veille
<0.5 W
Alimentation lectrique 120 V ~ 60 Hz
Taux de rafraichissement de
lentre HDMI 480i / 60HZ, 720p / 60Hz, 1080i / 60Hz, 1080p /60Hz,
Receiving systems
Analogue NTSC
Digital ATSC
Ports 3orts HDMI, 1port USB, 1 Optique sortie, 1 entre RF, 1 sortie jack pour couteurs, 1 entre video RCA composite, 1 entre audio gauche / droite pour composite
15
Clause de non-responsabilit: Toutes les produits, caractristiques de produits et donnes sont susceptibles dvoluer sans pravis afin damliorer la fiabilit, la fonctionnalit, le design ou autre. Consommation de courant
Informations sur le service et la garantie
Pour faire une demande de garantie, veuillez envoyer un courriel lectronique support@curtiscs.com ou appeler le 1-800-968-9853. 1 ans de garantie Ce produit est garanti contre tout dfaut de matriel et de fabrication pendant une priode de un (1) ans compter de la date d'achat d'origine. Pendant cette priode, votre seul recours est la rparation ou le remplacement de ce produit ou composant jug dfectueux, notre choix; Cependant, vous tes responsable de tous les cots associs au retour du produit. Si le produit ou le composant n'est plus disponible, nous le remplacerons par un produit similaire de valeur gale ou suprieure. Avant l'envoi d'un produit de remplacement, le produit doit tre rendu inutilisable ou nous tre renvoy. Cette garantie ne couvre pas le verre, les filtres, lusure normale, une utilisation non conforme aux instructions imprimes, ni les dommages matriels rsultant dun accident, dune altration, dune utilisation abusive ou abusive. Cette garantie sapplique uniquement lacheteur initial ou au destinataire du cadeau. Conservez le reu de vente original, car une preuve d'achat est ncessaire pour faire une rclamation de garantie. Cette garantie est annule si le produit est utilis pour un usage autre que domestique ou s'il est soumis une tension ou une forme d'onde autre que celle indique sur l'tiquette (par exemple, 120V ~ 60Hz). Nous excluons toute rclamation pour des dommages spciaux, accessoires et conscutifs causs par une violation de la garantie explicite ou implicite. Toute responsabilit est limite au montant du prix d'achat. Toute garantie implicite, y compris toute garantie lgale ou condition de qualit marchande ou d'adquation un usage particulier, est refuse sauf dans la mesure o la loi l'interdit, auquel cas cette garantie ou condition est limite la dure de cette garantie crite. Cette garantie vous confre des droits lgaux spcifique. Vous pouvez avoir d'autres droits lgaux qui varient selon votre lieu de rsidence. Certains tats ou provinces n'autorisant pas les limitations de garanties implicites ou de dommages spciaux, accessoires ou indirects, les limitations ci-dessus peuvent ne pas vous concerner. Pour un service plus rapide, trouver le modle, le type et les numros de srie sur votre appareil. Garantie de 90 jours Les tlcommandes sont garanties compter de la date d'achat pour une priode de quatre- vingt-dix (90) jours, condition que la tlcommande ait t utilise comme prvu et exempte de dommages.
JOIGNEZ VOTRE PREUVE D'ACHAT ICI, UNE PREUVE D'ACHAT EST NCESSAIRE POUR OBTENIR UN
SERVICE DE GARANTIE.
Veuillez avoir linformation suivantes lorsque vous contactez l'quipe d'assistance :
Nom, adresse et numro de tlphone.
Numro de modle et numro de srie.
Une description claire et dtaille du problme.
Preuve d'achat comprenant le nom, l'adresse et la date d'achat du revendeur ou du dtaillant.
Autres fonctionnalits Smart TV, Dynamic contrast Picture,support mural standard VESA
16
Dolby Digital
Fabriqus sous licence par Dolby Laboratories. Dolby, Dolby Audio, et le symbole du double D sont des marques de Dolby Laboratories.
HDMI
Les termes HDMI et HDMI High-Definition Multimedia Interface, et le logo HDMI des marques ou des marques dposes de HDMI Licensing LLC aux Etats-Unis et dans dautres pays.
Roku
ROKU, ROKU TV et le logo ROKU sont des marques dposes et a proprit de Roku, Inc. Les autres logos de chanes, marques et noms de produits sont des marques et marques dposes de leurs dtenteurs respectifs.
RCA
RCA, le logo RCA logo, le logo des deux chiens (Nipperet Chipper) logo, sont des marques
Related manuals for RCA ROKU TV RHOR406 TV User Guide
Manualsnet FAQs
If you want to find out how the ROKU TV RCA works, you can view and download the RCA ROKU TV RHOR406 TV User Guide on the Manualsnet website.
Yes, we have the User Guide for RCA ROKU TV as well as other RCA manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The User Guide should include all the details that are needed to use a RCA ROKU TV. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the RCA ROKU TV RHOR406 TV User Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This RCA ROKU TV RHOR406 TV User Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download RCA ROKU TV RHOR406 TV User Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print RCA ROKU TV RHOR406 TV User Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the RCA ROKU TV RHOR406 TV User Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.