Summary of Content for Rangemaster Amethyst 1 Granite Inset Ash Black User Guide PDF
1... Place the sink upside down on the worktop... Position the sink on the worktop as required... Make sure the cabinet framework will clear all parts of the sink... Using a soft, sharp pencil draw around the sink as accurately as possible (Fig... 1... 3)... Remove the sink...
* NB... This cut out option will leave a 15mm visible trim around the sink when fitted to the worktop
Tap hole locations are part cut into the underside of the sink... The upper section of the tap hole will have to be knocked out... ALWAYS knock out from the top of the sink and NOT the underside, this may damage the front top surface of the sink... After deciding which tap hole to use, mark the location of the tap hole centre onto the front face of the sink using a soft pencil (This may already be marked with a coloured adhesive dot)... The area around the rear of the tap hole will require support... Place the tip of a screwdriver or similar tool on the marked position, ensuring that the shaft of the screwdriver is at 90 to the sink surface (NOT angled)... Strike the screwdriver with a hammer... The upper section of the tap hole should knock out... The tap hole will have rough edges... Use a suitable rasp to smooth the edges of the hole... Always work towards the sink surface avoiding upward strokes that may chip the sink surface...
1... Position the clamps over the holes in the sink... Push the clamps down ensuring that the base of the clamps are flat against the sink surface... If a clip is tight then, using a flat screwdriver, tap on the base until it snaps into place...
1... The worktop should already be upside down with silicon sealant in place... Lay the sink on to the worktop... Fit the U clamps into place using the screws supplied (Fig... 1... 12) this is the most effective method, although if the worktop has been fitted to the cabinet the sink can be fixed in position from underneath...
Day-to-day care Although your sink is made from extremely durable materials and will withstand a great deal of hard use, it can be scratched by hard or sharp objects... If the surfaces are to be kept in a blemish free condition reasonable care should be taken when handling such items...
If you want to find out how the Igneous Granite Inset Rangemaster works, you can view and download the Rangemaster Amethyst 1 Granite Inset Ash Black User Guide on the Manualsnet website.
Yes, we have the User Guide for Rangemaster Igneous Granite Inset as well as other Rangemaster manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The User Guide should include all the details that are needed to use a Rangemaster Igneous Granite Inset. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Rangemaster Amethyst 1 Granite Inset Ash Black User Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Rangemaster Amethyst 1 Granite Inset Ash Black User Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Rangemaster Amethyst 1 Granite Inset Ash Black User Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Rangemaster Amethyst 1 Granite Inset Ash Black User Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Rangemaster Amethyst 1 Granite Inset Ash Black User Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.