Pyle PTC20LD TV Operating Manual PDF

Model PTC20L D 16:10 DIGITAL LCD-TV-Monitor

OPERATING MANUAL

19 Hi-Definition LCD Flat Panel TV w/Built-in DVD Player

Turning on and off TV Select on screen language

Choosing a TV channel Selecting input source

How to adjust the OSD Volume adjustment

Picture menu options Audio menu options Setup menu options Feature menu options VGA menu options YPbPr menu options HDMI menu options

Contents

SAFETY PRECAUTIONS

2

FRONT, BACK, CONNECTIONS OF LCD

3

TV INSTALLATION GUIDE

4

1 PREFACE 3

3

5

4.1 CONNECTION ANTENNAS

4.2 AV VIDEO INPUT DRAWING

4.3 S-VIDEO INPUT DRAWING

4.4 PC (VGA) CONNEXION DRAWING

7

7

7

8

5

9

9

9 10 10 10

11 11 12 14 16 17 17

6

7

REMOTE CONTROLS SETUP

1

22 A Remote control instructions

B Battery Usage Caution

20

ACCESSORIES 22

9 TROUBLESHOOTING AND ADVICE

10 SPECIFICATIONS

32

33

THE DVD SETUP MENU SYSTEM8

Contents

2

258.2.3 Dolby Digital Setup

8.2.4 Video Setup

8.2.5 Preference Setup

26

28

8.1 Basic Operation

8.2 DVD Setup Mode

8.2.1 General Setup

8.2.2 8.2.2 Speaker Setup Page

23

25

23

23

3

PREFACE Thank you for buying this TV ! Please read this manual thoroughly before operating the monitor. Make sure the monitor was not damaged in transit. Should the monitor is damaged, do no instal l it and contact your dealer. Check that you have all the accessories according to the model.

SAFETY PRECAUTIONS Preparation

Put the monitor on a stable surface.

Do not use the monitor with others fixations than those provided or suggested by the manufacturer.

Do not place any material on the monitor.

Do not block or cover the ventilation openings on the monitor

If you have a wall mount, check that it is steady

The monitor must be plugged with a tension source of 110 volts and 60 Hz.

Power cord and cables must be properly routed and protected to prevent people from stepping on them and causing the monitor to fall.

Power source

Connexion cables

Minimum distances 10cm

20cm

10cm 5cm

4

Heating sources and humidity

Keep the monitor dry and away from humidity.

Keep the monitor away from heat sources

Cleaning and maintenance

Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the monitor.

Only clean the monitor with a soft and dry cloth.

In case of troubleshooting, do not use spare parts other than those suggested by the manufacturer. Using inadequate spare parts can lead to electric shocks, short-circuits fire or other incidents.

Departure in holidays

Unplug the LCD during lighting storms or when unused for long periods of time.

Front , Back , Connections of LCD Front View

5

Back View and Control Connections

IR ON OFF LED/

HDMI

13 11 10 9 8 7 6 5 3 2 1

VGA Y Pb PrDC IN R IN RF INS VID EOPC AUDIO

4

V INPHONE L IN

12

1 2 3 4 5 6 7 8 9

10 11 12 13

RF IN

VGA PC AUDIO

Y Pb Pr

PHONE

S VIDEO HDMI

DC IN

V IN

R IN L IN

6

Side View DVD Player Control

Disc Slot inside

(Label side toward user)

DVD Function Keys

EJECT DISK BUTTON PLAY / PAUSE

7

TV INSTALLTION DRAWINGS

To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as shown can be sourced from TV equipment shops, which will provide service for correct installation and connection. After installation, insert the 75-ohm antenna plug into the antenna jack as shown.In case of signal of closed circuit TV,

CONNECTION ANTENNAS

75 OHM ANTENNA PLUG

POWER PLUG OF ANTENNA AMPLIFIER

OUTDOOR ANTENNA AMPLIFIER

VHF ANTENNA VHF ANTENNA

INDOOR ANTENNA AMPLIFIER

VIDEO CONNECTION

S VIDEO CONNECTION

HDMI

VGA Y Pb PrDC IN R IN RF INS VID EOPC AUDIO V INPHONE L IN

HDMI

VGA Y Pb PrDC IN R IN RF INS VID EOPC AUDIO V INPHONE L IN

8

PCINPUT CONNECTION

VGA PC AUDIO

HDMI

VGA Y Pb PrDC IN R IN RF INS VIDEOPC A UDIO V INPHONE L IN

9

Menu Operation

1. Connecting to the AC input cable then press the main power switch to switch ON LCD TV. At this time the TV will enter standby mode and indicator show red.

2. Use POWER button can turn ON LCD TV from standby mode.

1. Press POWER button or button on the remote control to enter standby mode. The indicator is red. 2. Using main power switch turns off LCD TV completely.

Press to display the main menu.

Press / repeatedly to select the . Use / and / to select .

ress and button to select your desired language.

MENU SET MENU

LANGUAGE P

When you are satisfied with your choice, press the

to exit.

MENU

Audio

Setup

Feature To Move To Select To Exit

Tuning Band DTV-Signal Auto Ch Search Add On Ch Search Manual Ch Set Channel Labels

AirPicture

Menu Language English

1. Press to adjust the volume.VOL+/-

2. If you want to switch the sound OFF , press the MUTE .

3. You can cancel this function by pressing or .MUTE VOL+

Enter Menu

10

Menu Operation

Press to increase channel number. Press to decrease channel number.

CH+ CH -

You can select the channel number by pressing 0 to 9 or -/--.

- Press the button to display the main menu.MENU

- Use / / / buttons to select and adjust the available menus.

The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides graphical presentation.

You can select the input source by pressing the on the remote control or on the front panel.INPUT

Picture

Audio

Setup

Feature To Move To Select To Exi tEnter

Picture Mode

Menu

Contras t 50 Brightness Sharpness Color

Tint Aspect Ratio

User

Wide

Audio

Setup

Feature To Move To Select To Exit

Audio Mode Audio Language Bass 30 Treble 30 Balance 0

Digital Audio Output

VoicePicture English

PCM

Audio

Setup

Feature To Move To Select To Exit

Tuning Band DTV-Signal Auto Ch Search Add On Ch Search Manual Ch Set Channel Labels

AirPicture

Menu Language English

Audio

Setup

Feature To Move To Select To Exi t

Time Set Sleep Timer Advanced Video Menu Password Set Parenta l Control Digital Closed Caption

Picture Off

To select 1-digit channel (e.g. Channel 5): Press the 5 button. To select 2-digit channel (e.g. Channel 20): Press the -/-- button repeatedly to display -- then press 2, follow by 0. To select 3-digit channel (e.g. Channel 103): Press the -/-- button repeatedly to display -- then press 1, follow by 0, follow by 3.

Enter Menu

Enter Menu

Enter Menu

50 50 50

50

Reset Ntscc Atscc

CC

CC

Menu Operation

11

In this manual, the OSD ( On Screen Display) may be different from your TV s because it is just example to help the TV operation.

3. When you are satisfied with your adjustment, press to exit the main menu.MENU

2. Press and button to adjust.

Press / button and then use / to adjust the contrast of the picture.

Press / button and then use / to adjust the brightness of the picture.

Press / button and then use / to adjust the color saturation.

Press / button and then use / to adjust the sharpness level of picture.

1. Use / to select what you want to adjust in the menu.Picture

Picture

Audio

Setup

Feature To Move To Select To Exit

Picture Mode Contrast 50 Brightness Sharpness Color

Tint Aspect Ratio

User

Wide

Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in PICTURE menu. You may select the picture mode directly by pressing the PMODE button on the remote control.

Press / button and then use / to adjust the tint of picture.

Press / to select the ratio of picture display such as Normal/ Zoom/ Wide and Cinema.

Enter Menu

50 50 50

50

Ch Video 1

Video 2 Video 3

Video 4 Video 5

Video 6

Menu Operation

12

3. When you are satisfied with your adjustment, press or to exit the main menu.MENU EXIT

2. Press and button to adjust.

1. Use / to select what you want to adjust in the menu.Audio

Press / button and then use / to adjust the audio output between left and right speakers.

Press / button and then use / to increase or decrease the level of the lower-pitched sounds.

Press / button and then use / to increase or decrease the level of the higher-pitched sounds.

3. When you are satisfied with your adjustment, press to exit the main menu.MENU

2. Press and button to adjust.

1. Use / to select what you want to adjust in the menu.Setup

Audio

Setup

Feature To Move To Select To Exit

Audio Mode Audio Language Bass 30 Treble 30 Balance 0

Digital Audio Output

VoicePicture English

PCM

You can select the type of sound which best corresponds to your listening requirements by selecting Sound in SOUND menu. You may select the sound mode directly by pressing the SMODE button on the remote control.

Press / to select one of the audio language such as English/ French and Spain, but the condition is that the program system has included the language code.

Press / to select the one of mode of the digital audio output such as PCM and RAW.

Audio

Setup

Feature To Move To Select To Exit

Tuning Band DTV-Signal Auto Ch Search Add On Ch Search Manual Ch Set Channel Labels

AirPicture

Menu Language English

Press key to select Air, Cable, Cable HRC, Cable IRC or Cable Auto.Enter

In DTV mode, you can tune manually and adjust the angle, orientation of the antenna etc

Enter Menu

Enter Menu

Reset

Menu Operation

13

Press / key to move the cursor to the item to be selected (item selected is highlighted in yellow). Press key to enter your selection and scan. After the scan is finished, the following menu will display. The channels found are automatically saved as below:

Enter

Analog Channels Found

Autoprogram Menu NTSC Channel 19

Digital Channels Found

Not Found

Progress(%) 12

2

0

When the channels are found, use / to add it to the channel list.

Press Enter button to display a channel list that you can select channel as below:

To Move To Select To Exit

Manual Channel Set Menu

Ch 42 -1 ATSCdmo Viewable

Ch 2 -0 Viewable

Ch 11 -0 Viewable

Ch 22 -0 Viewable

Ch 31 -0 Viewable

Ch 52 -0 Viewable

Ch 54 -0 Viewable

Ch 66 -0 Viewable

Ch 68 -0 Viewable

Allows you to name the channel that is selected. Use / to move the cursor and use / to input the name and then press Menu or Enter to return or exit as following:

Channel Labels Menu

To Move To Change To Exit

Ch 42-1 ATSC dmo

To select language of the OSD such as English/ French and Spain

Enter M enu

Enter Me nu

Menu Operation

14

Audio

Setup

Feature To Move To Select To Exit

Time Set Sleep Timer Advanced Video Menu Password Set Parenta l Contro l Dig ita l Closed Caption

Picture Off

3. When you are satisfied with your adjustment, press to exit the main menu.MENU

2. Press and button to adjust.

1. Use / to select what you want to adjust in the menu.Feature

Press / button and then use Enter the time set menu as below that allows you to set the time the TV will display.

To Move To Select To Exit

Time Zone

Time Set Menu Time Set Mode

Year Date Time

Auto

Pacific

Dec 29

12:00 AM

2006

You can select one of auto and manual to set the time. When selected auto, the item of year/date and time will be disabled and can not to adjust. When select the manual

mode, you can press / and / to set the corresponding functions.

Press / to select the time zone such as Pacific/ Alaska/ Hawaii/ Eastern/ Central/Mountain.

Press / to select the amount of time before your TV turn off automatically and press the Enter that can select the 30 min /60min/90min and OFF.

Press Enter to enter the advance video menu as below:

To Move To Select To Exit

Noise Reduction-- Speckle

Advance Video Menu Noise Reduction--Spatial

Noise Reduction-- Temporal Color Temperature 3D Y/C Adaptive Contrast Setting

Off

Off

Normal

On

Off

Preset

On

Enter Menu

Enter Me nu

Ent er M enu

Menu Operation

15

- Noise Reduction--Spatial: press Enter to select on or off.

- Noise Reduction--Speckle: press Enter to select on or off.

- Noise Reduction--Temporal: press Enter to select on or off.

- Auto Contrast Enhancement: press Enter to select on or off.

- Color Temperature: press Enter to select one of Normal/Cool

and Warm.

- 3D Y/C: press Enter to select on or off.

- Adaptive Contrast: press Enter to select on or off.

- Setting: press Enter to return to the factory setting.

Press Enter to enter the Enter Old Password menu, and then input the number of 0-9 as below, and you can change the password when you input the new one twice.

Enter Old Password

Press Enter to enter the sub-menu and then uses the 0-9 to enter the correct password.

This item allows you to set the closed caption, and press Enter to enter Closed Caption Options menu as below:

To Move To Select To Exit

Size

Digital Closed Caption Style

Font Text Color

Automatic

Automatic

Text Opacity Background Color Background Opacity Edge Effect Edge Color

Automatic

Automatic

Automatic

Automatic

Automatic

Automatic

Automatic

DECIDED BY BROADCASTING

To Move To Select To Exit

Candlan Rating Menu

Candlan English Candlan French

E

C

C8+

G

PG

14+

18+

E

G

8 ans+

13 ans+

16 ans+

18 ans+

Enter Menu

Ent er M enu

Menu Operation

16

- Style: press Enter to select one of Automatic and Custom, when you select automatic, the others are disable and can not be

adjusted.

- Size: press to select one of Normal/Large and Small.

- Font: press to select one of Default and from Font1 to Font7.

- Text Color: press to select one of Red/Green/Blue/Yellow/Magenta/Cyan/Black and White.

- Text Opacity: press to select one of the Solid/Flashing/Transparent/Translucent.

- Background Color: press to select one of the Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.

- Background Opacity: press to select one of the Solid/Flashing/Transparent/Translucent.

- Edge Effect press to select one of the None/Raised/Depressed/Uniform/Left Shadow/Right Shadow.

- Edge Color press to select one of the Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.

Enter

Enter

Enter

Enter

Enter

Enter

Enter

Enter

Audio

Setup

Feature To Move To Select To Exit

Time Set Sleep Timer Advanced Video Menu

Picture Off

VGA Set

3. When you are satisfied with your adjustment, press to exit the main menu.MENU

2. Press and button to adjust.

1. Use / to select what you want to adjust in the menu.Feature

Press / button and then use Enter to enter the VGA set menu as below:

To Move To Select To Exit

V-Pos

VGA Setting-1024x768@70Hz H-Pos

Clock Phase Auto Adjust

50 50 50 50

Setting Preset

Press / button and then use / to adjust the phase of the picture.

Press / button and then use / to adjust the clock of the picture.

Press / button and then use / adjust the vertical position of the picture.

Press / button and then use / adjust the horizontal position of the picture.

Enter Menu

Enter Menu

Menu Operation

17

-Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters

-Clock This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size also will change.

-Position This function is to adjust the picture to Left/Right and Up/Down as you prefer..

Press / button and then use / to do auto adjust that automatically adjusts the available options for the best viewing configuration.

Press Enter to do preset that can return to the factory setting.

Audio

Setup

Feature To Move To Select To Exi t

Time Set Sleep Timer Advanced Video Menu

Picture Off

Component Set

3. When you are satisfied with your adjustment, press to exit the main menu.MENU

2. Press and button to adjust.

1. Use / to select what you want to adjust in the menu.Feature

Press / button and then use Enter to enter the VGA set menu as below:

To Move To Select To Exit

V-Pos

Component Setting-720x480I@30/29.97Hz H-Pos

Clock Phase Auto Adjust

50 50 50 50

Setting Preset

Enter M enu

Enter M enu

Menu Operation

18

Audio

Setup

Feature To Move To Select To Exit

Time Set Sleep Timer Advanced Video Menu

Picture Off

Press / button and then use Enter the time set menu as below that allows you to set the time the TV will display.

Press / to select the amount of time before your TV turn off automatically and press the Enter that can select the 30 min /60min/90min and OFF.

Press Enter to enter the advance video menu.

To Move To Change To ExitMenu

On

Advanced Video Menu Noise Reduction --Spatial Noise Reduction --Speckle Noise Reduction --Temporal Color Temperature 3D Y/C

Normal

On

On

On

Enter Menu

19

REMOTE CONTROL Remote control instructions

MTS

MENU CCD EXIT DISPLAY

D DISPLAY.

VOL

VOL CH

CH

DVD SETUP ZOOM EPG

Switch on LCD TV when at standby mode or vice versa.

Press to mute the sound. Press again or press VOL+ to unmute.

Press to cycle through the input source in following: Ch Video1 Video2 Video3 Video4

Video5Video6

Press repeatedly to cycle through the available video picture modes.

Press to cycle through the different sound settings.

Audio selection button.

Lets you select amount of time before your TV turn itself off automatically.

Press 0-9 to select a TV channel directly when you are watching TV. The channel change after 2 seco- nds.

-/-- Press this button to enter a program number for multiple program channel such as 2-1,etc.

Return to the previous channel viewed.

20

MTS

MENU CCD EXIT DISPLAY

D DISPLAY.

VOL

VOL CH

CH

DVD SETUP ZOOM EPG

Brings up the main menu to the screen.

Closed caption button.

Clears all on-screen displays and returns to TV viewing from any menu.

Press to display the source and channels info- rmation.

Allows you to navigate the on-screen menus and adjust the system settings to your preference.

Press to scan through channels. To scan quickly channels, press and hold down either +/-button.

Press to increase / decrease the sound level.

DVD ZOOM.

Display Electronic Program Guide.

DVD DISPLAY

To display subtitle in DVD mode.

21

MTS

MENU CCD EXIT DISPLAY

D DISPLAY.

VOL

VOL CH

CH

DVD SETUP ZOOM EPG

Jump to next track.

Jump to previous track.

DVD THUMB STICK/OK.

DVD STOP

Fast backward key.

Fast forward key.

PLAY/PAUSE

OPEN/CLOSE

22

Battery Usage Caution a)Open the cover b)AA size batteries, When inserting the batteries, make sure correct polarities as per+and -marks on the batteries and within the battery compartment c)Replace the battery cover

1.Install all batteries correctly, and as marked on the remote control. 2.Do not mix batteries:(OLD and NEW or CARBON and ALKALINE, etc) Remove batteries when the remote is not used for a long time.

To prevent battery leakage which may result in bodily injury or damage to the remote:

ACCESSORIES 1 Adapter Plug 2 One Remote Control 3 2 Batteries 1.5V 4 One User Manual

23

THE DVD SETUP MENU SYSTEM 8.1 Basic Operation

.2 DVD Setup Mode

.2.1 General Setup TV Display

PS

LB

Wide

Angle Mark

ON OFF

1. Press TV/DVD button on the remote controller or DVD button on the TV set to turn on ( or off ) DVD .

2. Press OPEN / CLOSE button to load disc into disc tray. 3. Press OPEN / CLOSE button to close the tray. Hold the disc without touching either of its surfaces, position it with the printed title side facing up, align it with the guides, and place it in its proper position.

Setup Mode provides the menu for the configuration of General Setup Page, Speaker Setup Page, Dolby Digital Setup ,Video Setup Page and Preference Page . Item selection in the Setup Menu is done by using the Navigation Arrows, SETUP button and the OK button. Press the SETUP button first , enter into SETUP menu, then press the DIRECTION RIGHT button, you can enter into the next Sub-menu. Press the SETUP button again to exit the Setup Menu.

This is selected when the DVD player is connected to a normal TV. Wide-screen images are shown on the screen, but with some parts cut automatically.

This is selected when the player is connected to a normal TV. Wide-screen images are shown on the screen, with black belt on the top and bottom.

This is selected when the player is connected to a wide-screen TV.

This only works when there is an angle mark on the disc. Select ON, the screen shows the mark when playing DVD.

8

8

24

OSD Language

Screen Saver

English French Spanish

On Off

This is used to select the OSD language.

Start the screen saver, the screen saver image will appear when the player stops or the picture is frozen for a few minutes. This saver can keep the screen from being damaged.

(Start the screen saver) (Remove the screen saver).

25

8.2.2 Speaker Setup Page Downmix

LT/RT

Stereo

A disc recorded multi channel soundtrack, the output signal will be incorporated to left and right channel.

A disc recorded multi channel soundtrack, The output signal will be incorporated to stereo.

8.2.3 Dolby Digital Setup Dual Mono This is used to select the Stereo, L-MONO, R-MONO and MIX-MONO.

26

Dynamic

Sharpness

High Medium Low

This option is used to set the compression ratio in order to control the sound (Vume) contrast.

This option is used to set the sharpness level of the sharpness of the video output

8.2.4 Video Setup

27

Contrast User can set the level of contrast for the image displayed. It is ranged from -16 to 16.

Brightness User can set the level of brightness for the image displayed. is ranged from -20 to 20.

28

8.2.5 Preference Setup You must press twice to enter Preference Page

This is selected when the player is connected to an PAL System TV.

The player will set the TV system according to the disc in the tray.

This is selected when the player is connected to a NTSC System TV.

STOP

TV Type PAL

MULTI

NTSC

29

Audio

English French Spanish Chinese Japanese German Duch Italian

Subtitle

English French Spanish Chinese Japanese German Duch Italian

If a language listed below is recorded on the disc, you can play the sound in such language. If not, the language recorded wil l be used.

If a language listed below is recorded on the disc, you set the subtitle to be displayed in such language. If not, the language recorded wil l be used.

30

Disc Menu

English French Spanish Chinese Japanese German Duch Italian

Parental

KID SAFE G PG PG 13 P GR R NC 17 ADULT

If a language listed below is record on the disc, you can set the Menu to be displayed in such language. If not, the language recorded will be used.

When playing disc with parental lock function, you may select an Age Control Grade according to grade of disc and your own preference. For example, if PG is selected, DVD Video disc rated higher than the PG grade cannot be played.

31

Default User can load the original factory setting by choose RESET and press OK button .

Password

NOTE:(Default password is 3308 )

User can change the password that is required when the user wants to change the Age Control Grade in the Parental Lock function.

32

TROUBLESHOOTING AND ADVICE Before calling our SAS centre, please check if you can solve the troubleshooting by yourself.

ControlTroubleshooting

No signal

No color shades

Stain show on the screen.

Double or multiple display image

Snow on the screen

The remote control does not work

"Zip" made noise on TV cover

No sound

Please check that all cables and cord's are correctly plugged in.

Adjust the contrast, the color and the brightness

May be result from a lighting signal from car, motor, neon light and other electrical devices or appliances.

May be the result of an electrical wave disturb from other TV, Computer and Game machine or Radio

The cables of the antenna are not correctly plugged in.

Please check the batteries order and alignment.Check that the IR of the remote control is not hidden by something.

Even if the display image is correct, the noise may come from an unsteady fixation of the panel.

Make sure that you have not press the MUTE button of the panel or of the remote control.

No DVD

DVD player not working properly

Make sure if the TV Set have been switched to DVD mode

Ensure disc is correctly inserted into the player. Ensure the disc does not damaged and with correct format. Please wait patiently as some discs need longer time to play.

33

SPECIFICATIONS

Screen Size

Display Type

Resolution(Pixel)

Brightness

Color

Contrast Ratio

View Angle(H/V)

Aspect Ratio

AC INPUT

TV System

Video Input Format

Antenna Input

Audio Output

Input

Video

S-Video

PC

Audio (Videos-Video-PC)

Weight

Dimensions (with stand)

TFT LCD

NTSC

NTSC

L / R 10W*2

Y:1.0Vp-p3db C:0.3Vp-p3db

This manual is only for your reference, any change to the design and specification will not be advised.

Standard antenna socket 75

R L200mVrms max3 0vp p 20 kRCA/ ( . - )

Video 0vp p75 RCA1. - ;

Disc Physical Format

DV