Poly-Planar IP-100 IPod Cable Owner's Manual PDF

1 of 1
1 of 1

Summary of Content for Poly-Planar IP-100 IPod Cable Owner's Manual PDF

IP-100 IPod Connection Kit Installation Instructions

IMPORTANT! Before installing these components disconnect the Poly Planar MRD60 / MRD70 Power connection. This is the

white plastic 12 pin plug on the back of the radio. Reconnect when all work has been completed

IMPORTANT! These components are not waterproof. The control module must be mounted in a dry location.

GETTING STARTED:

Find a dry flat location within 12 inches of the radio to

attach the IP100 Module. This may be on the top of the

radio or panel.

Peel the adhesive back off the Velcro and attach to the

Module first then to the panel

Press firmly to adhere the Velcro

Find the CD Changer plug on the back of the MRD60 /MRD70

Remove the rubber plug from the Radio connector and insert the DIN

connector on cable A as shown. Be sure to fully insert this plug. Connect

the 24pin connector to the Module

Insert the Round end of cable B into the Module. Connect the opposite

end to your IPod.

Operation:

With the radio on, use the source button to toggle to CD Changer.

If Display shows No Disc Loaded check connections

Following normal IPod protocol select a Playlist or Category

The IP100 will play up to 99 tracks from a Playlist or Category.

Use the Tune ^ (Up) or TUNE v (Down) to change tracks.

The IP100 charges the IPod battery whenever the unit is attached to the

system. Even when not using it as the source.

Scan, Random, Repeat and Pause functions are usable in this mode.

Check your radio Manual for more information on these functions.

A A

B

Works with all IPods with

bottom multi pin con

Manualsnet FAQs

If you want to find out how the IP-100 Poly-Planar works, you can view and download the Poly-Planar IP-100 IPod Cable Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Poly-Planar IP-100 as well as other Poly-Planar manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Poly-Planar IP-100. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Poly-Planar IP-100 IPod Cable Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Poly-Planar IP-100 IPod Cable Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Poly-Planar IP-100 IPod Cable Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Poly-Planar IP-100 IPod Cable Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Poly-Planar IP-100 IPod Cable Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.