Contents

Polaris Ranger 1000, Crew 1000 v12 Owner's Manual PDF

1 of 196
1 of 196

Summary of Content for Polaris Ranger 1000, Crew 1000 v12 Owner's Manual PDF

OWNERS MANUAL

For Maintenance and Safety

RANGER 1000 RANGER CREW 1000

2022

WARNING Operating, servicing, and maintaining a passenger vehicle or off-road

vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize

exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves

or wash your hands frequently when servicing your vehicle.

For more information go to www.P65Warnings.ca.gov/passenger-vehicle.

! WARNING Read, understand, and follow all of the instructions and safety

precautions in this manual and on all product labels.

Failure to follow the safety precautions could result in serious injury or death.

For videos and more information about a safe riding experience with your Polaris vehicle, scan this QR

code with your smartphone.

!

2022 Owners Manual

RANGER 1000 RANGER 1000 - EPS

RANGER 1000 Premium RANGER CREW 1000

RANGER CREW 1000 Premium RANGER 1000 Premium + Winter Prep

RANGER CREW 1000 Premium + Winter Prep

RANGER CREW 1000 Machinery Directive

Unless noted, trademarks are the property of Polaris Industries Inc. Loctite is a registered trademark of Henkel Corporation. Recreational Off-Highway Vehicle Association and ROHVA are registered trademarks of Recreational Off-Highway Vehicle Association. WD-40 is registered to WD- 40 Manufacturing Company. QR Code is a registered trademark of DENSO WAVE INCORPORATED. OSHA is a registered trademark of the Occupational Safety and Health Administration. U. S. Dept. of Labor, MACPHERSON RIDE is a trademark of Aftermarket Auto Parts Alliance, Inc. NGK is a registered trademark of NGK Spark Plug Co., Ltd. Tread Lightly is a registered trademark of the United States Department of Agriculture. Autolite is a registered trademark of BMO HARRIS BANK N.A. Google Play is a registered trademark of Google LLC. BatteryMINDer is a registered trademark of VDC Electronics Inc. Apple and APP Store are registered trademarks of Apple Inc. NYOGEL is a registered trademark of Nye Lubricants, Inc.

Copyright 2022 Polaris Inc. All information contained within this publication is based on the latest product information at the time of publication. Due to constant improvements in the design and quality of production components, some minor discrepancies may result between the actual vehicle and the information presented in this publication. Depictions and/or procedures in this publication are intended for reference use only. No liability can be accepted for omissions or inaccuracies. Any reprinting or reuse of the depictions and/or procedures contained within, whether whole or in part, is expressly prohibited.

The original instructions for this vehicle are in English. Other languages are provided as translations of the original instructions.

Printed in U.S.A. 9940494 R01

Thank you for purchasing a POLARIS vehicle, and welcome to our world-wide family of POLARIS enthusiasts. Be sure to visit us online at www.polaris.com for the latest news, new product introductions, upcoming events, career opportunities and more.

Here at POLARIS we proudly produce an exciting line of utility and recreational products. We believe POLARIS sets a standard of excellence for all utility and recreational vehicles manufactured in the world today. Many years of experience have gone into the engineering, design, and development of your POLARIS vehicle, making it the finest machine weve ever produced.

For safe and enjoyable operation of your vehicle, be sure to follow the instructions and recommendations in this owners manual. Your manual contains instructions for minor maintenance, but information about major repairs is outlined in the POLARIS Service Manual and can be performed by a factory certified Master Service Dealer (MSD) technician.

Your POLARIS dealer knows your vehicle best and is interested in your total satisfaction. Your POLARIS dealership can perform all of your service needs during and after the warranty period.

For the most up-to-date owners manual visit https://www. polaris. com/en-us/ owners-manuals.

3

WELCOME

4

WELCOME

Introduction . . . . . . . . . . . . . . . . . . . . 7 Safety . . . . . . . . . . . . . . . . . . . . . . 13 Features and Controls . . . . . . . . . . . . . . 47 Operation . . . . . . . . . . . . . . . . . . . . 85 Winch Guide. . . . . . . . . . . . . . . . . . . 105 Emission Control Systems . . . . . . . . . . . . . 115 Maintenance . . . . . . . . . . . . . . . . . . 117 Specifications . . . . . . . . . . . . . . . . . . 163 POLARIS Products . . . . . . . . . . . . . . . . 169 Troubleshooting . . . . . . . . . . . . . . . . . 171 Warranty . . . . . . . . . . . . . . . . . . . . 177 Maintenance Log . . . . . . . . . . . . . . . . 187

5

6

INTRODUCTION BEFORE YOU RIDE This POLARIS vehicle is an off-road vehicle. Familiarize yourself with all laws and regulations concerning the operation of this vehicle in your area.

WARNING

Failure to heed the warnings and safety precautions contained in this manual can result in severe injury or death. Your POLARIS vehicle is not a toy and can be hazardous to operate. This vehicle handles differently than cars, trucks or other off-road vehicles. A collision or rollover can occur quickly, even during

routine maneuvers like turning, or driving on hills or over obstacles, if you fail to take proper precautions.

Read this owners manual and review the safety DVD that came with your vehicle. A free extra copy of the DVD can be obtained by contacting your local POLARIS dealer. Understand all safety warnings, precautions and operating procedures before operating the vehicle. Keep this manual with the vehicle.

Never operate this vehicle without proper instruction. Take an authorized training course. See the Safety Training section for more information.

This vehicle is an ADULT VEHICLE ONLY. You MUST be at least age 16 and have a valid drivers license to operate this vehicle.

Always use the cab nets (or doors) while riding in this vehicle. Always keep hands, feet and all other body parts inside the vehicle at all times.

Always wear a helmet, eye protection, gloves, long-sleeve shirt, long pants and over-the-ankle boots.

Never operate this vehicle under the influence of drugs or alcohol, as these conditions impair judgement and reduce the operators ability to react.

Complete the New Operator Driving Procedures outlined in this manual. Never allow a guest to operate this vehicle until the guest has completed the New Operator Driving Procedures.

Never permit a guest to operate this vehicle unless the guest has reviewed the owners manual and all safety labels and has completed a safety training

7

INTRODUCTION

SAFETY SYMBOLS AND SIGNALWORDS The following signal words and symbols appear throughout this manual and on your vehicle. Your safety is involved when these words and symbols are used. Become familiar with their meanings before reading the manual.

DANGER DANGER indicates a hazardous situation which, if not avoided, WILL result in

death or serious injury.

WARNING WARNING indicates a hazardous situation which, if not avoided, COULD result

in death or serious injury.

CAUTION CAUTION indicates a hazardous situation which, if not avoided, COULD result

in minor to moderate injury.

NOTICE

NOTICE provides key information by clarifying instructions.

IMPORTANT IMPORTANT provides key reminders during disassembly, assembly, and

inspection of components.

The Prohibition Safety Sign indicates an action NOT to take in order to avoid a hazard.

The Mandatory Action Sign indicates an action that NEEDS to be taken to avoid a hazard.

8

INTRODUCTION

NEAR-FIELD COMMUNICATION (NFC) (IF EQUIPPED) Some Polaris vehicles come equipped with a near-field communication (NFC) chip. The NFC chip is embedded in the Polaris emblem located at the front of the vehicle and seamlessly connects you to a digital platform of vehicle information and tools. See your dealer for more information.

IMPORTANT Not all devices are equipped with an NFC reader. Additionally, some devices require third party applications to access NFC content. For questions regarding

the NFC reader on your device, refer to the devices user manual.

On models equipped with NFC, place your smartphone directly over the Polaris emblem to do the following:

View vehicle specific information

Access your Polaris Garage Download and view the owners manual

View accessory instructions Watch helpful videos Access warranty information Check for service notifications

RIDE COMMANDWITH NFC Additional NFC features are available when using the Ride Command mobile app. To access these features, do the following:

1. Download the Ride Command mobile app from the Apple App Store or Google Play store.

2. Create or log in to an existing account.

3. From the Ride Command mobile app home screen, select Add Vehicle. 4. On the vehicle, tap the NFC-enabled badge with the phone to scan the

vehicle.

5. Confirm information, name your vehicle, and tap add to garage.

SYSTEM REQUIREMENTS Refer to device manufacturers instructions to verify NFC read capability, and/or NFC-capable add-ons.

9

INTRODUCTION

EUROPEAN VIBRATION AND NOISE The driver-perceived noise and hand/arm and whole body vibration levels of this machinery is measured per EN 15997.

The operating conditions of the machinery during testing:

The vehicles were in like-new condition. The environment was controlled as indicated by the test procedure(s).

The uncertainty of vibration exposure measurement is dependent on many factors, including:

Instrument and calibration uncertainty Variations in the machine such as wear of components Variation of machine operators such as experience or physique Ability of the worker to reproduce typical work during measurements Environmental factors such as ambient noise or temperature

10

INTRODUCTION

DECLARATION OF CONFORMITY

11

INTRODUCTION

VEHICLE IDENTIFICATION NUMBERS Record your vehicle's identification numbers and key number in the spaces provided. Remove the spare key and store it in a safe place. An ignition key can be duplicated only by ordering a POLARIS key blank (using your key number) and mating it with one of your existing keys. The ignition switch must be replaced if all keys are lost.

NOTE The images below are for reference only. Depending on model, your vehicle

may differ slightly.

The engine serial number can be found on a decal applied to the front of the engine crankcaseq or stamped into the crankcase on the PTO side of the enginew.

The VIN can be found stamped on a portion of the left rear framee, above the PVTcover.

Vehicle Model Number:

Vehicle Identification Number (VIN):

Engine Serial Number:

Key Number

12

INTRODUCTION

SAFETY SAFETY TRAINING Safety training is a top priority for POLARIS. POLARIS strongly encourages you and any family members who will be riding this vehicle to take a training course.

For more information about safety, contact an authorized POLARIS dealer or visit the POLARIS web site at www.polaris.com

Your POLARIS vehicle is considered an on-road vehicle. Familiarize yourself with all laws and regulations concerning the operation of this vehicle in your area.

We strongly advise you to strictly follow the recommended maintenance program outlined in your owner's manual. This preventive maintenance program is designed to ensure that all critical components on your vehicle are thoroughly inspected at specific intervals.

SAFE RIDING GEAR Always wear a helmet, eye protection, gloves, long-sleeve shirt, long pants, over-the-ankle boots and seat belt at all times. Protective gear reduces the chance of injury.

RIDER COMFORT Under certain operating conditions, heat generated by the engine and exhaust system can elevate temperatures in the rider cab area. The condition occurs most frequently when a vehicle is being operated in high ambient temperatures at low speeds and/or high load conditions for an extended period of time. The use of certain windshield, roof and/or cab systems may contribute to this condition by restricting airflow.

Any discomfort due to heat buildup in this area can be minimized by wearing proper riding apparel and by varying speeds to increase airflow.

q Helmet w Eye Protection e Long Sleeves r Gloves t Long Pants y Over-the-Ankle Boots

13

SAFETY

HELMET Wearing a helmet can prevent a severe head injury. Whenever riding this POLARIS vehicle, always wear a helmet that meets or exceeds established safety standards. Clasp the buckle and pull each strap tight to ensure the helmet is properly secured to the head.

Approved helmets in the USA and Canada bear a U.S. Department of Transportation (DOT) label.

Approved helmets in Europe, Asia and Oceania bear the ECE 22.05 label. The ECE mark consists of a circle surrounding the letter E, followed by the distinguishing number of the country which has granted approval. The approval number and serial number will also be displayed on the label.

EYE PROTECTION Do not depend on eyeglasses or sunglasses for eye protection. Whenever riding this POLARIS vehicle, always wear shatterproof goggles or use a shatterproof helmet face shield. POLARIS recommends wearing approved Personal Protective Equipment (PPE) bearing markings such as VESC 8, V-8, Z87.1, or CE. Make sure protective eye wear is kept clean.

GLOVES Wear gloves for comfort and for protection from sun, cold weather and other elements.

BOOTS Wear sturdy over-the-ankle boots for support and protection. Never ride a POLARIS vehicle with bare feet or sandals.

CLOTHING Wear long sleeves and long pants to protect arms and legs.

14

SAFETY

RANGER 1000 SAFETY LABELS AND LOCATIONS Warning labels have been placed on the vehicle for your protection. Read and follow the instructions of the labels on the vehicle carefully. If any of the labels depicted in this manual differ from the labels on your vehicle, always read and follow the instructions of the labels on the vehicle.

If any label becomes illegible or comes off, contact your POLARIS dealer to purchase a replacement. Replacement safety labels are provided by POLARIS at no charge. The part number is printed on the label.

BELT WARNING The Belt Warning label is located on the clutch cover.

WARNING Improper service or maintenance of this PVTsystem can result in vehicle damage, SEVERE INJURYor DEATH. Always look for and remove debris inside and around clutch and vent system when replacing belt. Read owners manual or see authorized Polaris dealer.

Part number: 7177469 (English), 7177469F (French Canadian)

15

SAFETY

FUELTRANSPORT WARNING The Fuel Transport Warning label is located in the cargo box.

WARNING NEVER carry fuel or other flammable liquids on this vehicle Failure to follow this instruction could lead to serious burn injuries or death.

Part number: 7186122 (English), 7186122F (French Canadian)

PROPER USE WARNING The Proper Use Warning label is located on the ROPS.

WARNING Require Proper Use of Your Vehicle Do your part to prevent injuries: Do not allow careless or reckless driving.

Make sure operators are 16 or older with a valid drivers license.

Do not let people drive or ride after using alcohol or drugs.

Do not allow operation on public roads (unless designated for off-highway vehicle access) collisions with cars and trucks can occur.

Do not exceed seating capacity: 3 occupants.

Part Number: 7187260 (English), 7187260F (French Canadian)

16

SAFETY

SEAT BELT/ DRIVER RESPONSIBLY WARNING The Seat Belt/ Driver Responsibility Warning label is located on the console.

WARNING Improper vehicle use can result in SEVERE INJURYor DEATH Be Prepared

Fasten seat belts. Wear an approved helmet and protective gear. ALWAYS use vehicle cab nets and/or doors. Each rider must be able to sit with back against seat, feet flat on the floor, and hands on steering wheel or handholds. Stay completely inside the vehicle.

Drive Responsibly

Avoid loss of control and rollovers: Avoid abrupt maneuvers, sideways sliding, skidding, or fishtailing, and never do donuts.

Slow down before entering a turn. Avoid hard acceleration when turning, even from a stop. Plan for hills, rough terrain, ruts, and other changes in traction and terrain. Avoid paved surfaces.

Avoid side hilling (riding across slopes).

Be Sure Riders Pay Attention and Plan Ahead If you think or feel the vehicle may tip or roll, reduce your risk to injury:

Keep a firm grip on the steering wheel or handholds and brace yourself. Do not put any part of your body outside of the vehicle for any reason.

Rollovers have caused severe injuries and death, even on flat, open areas.

Part number: 7186122 (English), 7186122F (French Canadian)

17

SAFETY

MAXIMUM PAYLOAD WARNING WARNING

The Maximum Payload Warning label is located on the ROPS.

Part number: 7300067 (English), 7300067F (French Canadian)

RANGER NEVER EXCEED IF TOTAL PAYLOAD EXCEEDS

1000 40 mph (64 kph) 550 lbs (250 kg)

1000 25 mph (40kph) 1050 lbs (476 kg)

1000 CA 40 mph (64 kph) 550 lbs (250 kg)

1000 CA 25 mph (40kph) 1050 lbs (476 kg)

CREW 1000 40 mph (64 kph) 970 lbs (440 kg)

CREW 1000 CA 40 mph (64 kph) 970 lbs (440 kg)

CAUTION To avoid transmission damage, shift only when vehicle is stationary and at idle. When vehicle is stopped, place shift in parked position.

18

SAFETY

PASSENGER/ TIRE PRESSURE WARNING Standard/ Standard EPS Models The Passenger/ Tire Pressure Warning is located on the cargo box.

WARNING Never carry passengers in cargo box. Passengers can be thrown off. This can cause serious injury or death.

If total payload is greater than 500 lbs, the vehicle must be operated in LOW range.

WARNING IMPROPER TIRE PRESSURE OR OVERLOADING CAN CAUSE LOSS OF CONTROL RESULTING IN SERIOUS INJURY OR DEATH. Reduce speed and allow greater distance for braking when carrying cargo.

Overloading or carrying tall, off- center, or unsecured loads will increase your risk of losing control. Loads should be centered and carried as low as possible in box.

For stability on rough or hilly terrain, reduce speed and cargo.

RANGER 1000 CA 1000

MAXIMUM CARGO BOX LOAD 1000 lbs (454 Kg) 600 lbs (272 Kg)

TIRE PRESSURE IN PSI (KPa)

Front 10 (69) Rear 14 (96)

Front 10 (69) Rear 14 (96)

MAXIMUMWEIGHT CAPACITY INCLUDES WEIGHT OF OPERATOR, PASSENGER, CARGO, AND ACCESSORIES

1500 lbs. (680 Kg) 1100 lbs. (499 Kg)

Read Operation & Maintenance Manual for more detailed loading information.

Part number: 7300068 (English), 7300068F (French Canadian)

19

SAFETY

PASSENGER/ TIRE PRESSURE WARNING Premium Models The Passenger/ Tire Pressure Warning is located on the cargo box.

WARNING Never carry passengers in cargo box. Passengers can be thrown off. This can cause serious injury or death.

If total payload is greater that 500 lbs, the vehicle must be operated in LOW range.

WARNING IMPROPER TIRE PRESSURE OR OVERLOADING CAN CAUSE LOSS OF CONTROL RESULTING IN SERIOUS INJURY OR DEATH. Reduce speed and allow greater distance for braking when carrying cargo.

Overloading or carrying tall, off- center, or unsecured loads will increase your risk of losing control. Loads should be centered and carried as low as possible in box.

For stability on rough or hilly terrain, reduce speed and cargo.

RANGER 1000 CA 1000

MAXIMUM CARGO BOX LOAD 1000 lbs (454 Kg) 600 lbs (272 Kg)

TIRE PRESSURE IN PSI (KPa)

Front 12 (83) Rear 14 (97)

Front 12 (83) Rear 14 (97)

MAXIMUMWEIGHT CAPACITY INCLUDES WEIGHT OF OPERATOR, PASSENGER, CARGO, AND ACCESSORIES

1500 lbs. (680 Kg) 1100 lbs. (499 Kg)

Read Operation & Maintenance Manual for more detailed loading information.

Part number: 7300387 (English), 7300387F (French Canadian)

20

SAFETY

AIR FILTER CAUTION The Air Filter Caution label is located on the air filter housing.

CAUTION Use a Polaris approved air filter. The use of a non-Polaris approved air filter may cause engine damage. Before installing filter, ensure there is no dirt or debris in the clean side of the intake tube. The air filter must be properly seated before the lid is reinstalled. Please reference your owners manual for additional information regarding air filter service.

Part Number 7182652 (English), 7182652F (French Canadian)

21

SAFETY

RANGER CREW 1000 SAFETY LABELS AND LOCATIONS Warning labels have been placed on the vehicle for your protection. Read and follow the instructions of the labels on the vehicle carefully. If any of the labels depicted in this manual differ from the labels on your vehicle, always read and follow the instructions of the labels on the vehicle.

If any label becomes illegible or comes off, contact your POLARIS dealer to purchase a replacement. Replacement safety labels are provided by POLARIS at no charge. The part number is printed on the label.

BELT WARNING The Belt Warning label is located on the clutch cover.

WARNING Improper service or maintenance of this PVTsystem can result in vehicle damage, SEVERE INJURYor DEATH. Always look for and remove debris inside and around clutch and vent system when replacing belt. Read owners manual or see authorized Polaris dealer.

Part number: 7177469 (English), 7177469F (French Canadian)

22

SAFETY

FUELTRANSPORT WARNING The Fuel Transport Warning label is located in the cargo box.

WARNING NEVER carry fuel or other flammable liquids on this vehicle Failure to follow this instruction could lead to serious burn injuries or death.

Part number: 7186122 (English), 7186122F (French Canadian)

SEAT BELT/ DRIVER RESPONSIBLY WARNING The Seat Belt/ Driver Responsibility Warning label is located on the console.

WARNING Improper vehicle use can result in SEVERE INJURYor DEATH Be Prepared

Fasten seat belts. Wear an approved helmet and protective gear. ALWAYS use vehicle cab nets and/or doors. Each rider must be able to sit with back against seat, feet flat on the floor, and hands on steering wheel or handholds. Stay completely inside the vehicle.

Drive Responsibly

Avoid loss of control and rollovers: Avoid abrupt maneuvers, sideways sliding, skidding, or fishtailing, and never do donuts.

Slow down before entering a turn. Avoid hard acceleration when turning, even from a stop. Plan for hills, rough terrain, ruts, and other changes in traction and terrain. Avoid paved surfaces.

Avoid side hilling (riding across slopes).

23

SAFETY

Be Sure Riders Pay Attention and Plan Ahead If you think or feel the vehicle may tip or roll, reduce your risk to injury:

Keep a firm grip on the steering wheel or handholds and brace yourself. Do not put any part of your body outside of the vehicle for any reason.

Rollovers have caused severe injuries and death, even on flat, open areas.

Part number: 7186122 (English), 7186122F (French Canadian)

PROPER USE WARNING The Proper Use Warning label is located on the ROPS.

WARNING Require Proper Use of Your Vehicle Do your part to prevent injuries: Do not allow careless or reckless driving.

Make sure operators are 16 or older with a valid drivers license.

Do not let people drive or ride after using alcohol or drugs.

Do not allow operation on public roads (unless designated for off-highway vehicle access) collisions with cars and trucks can occur.

Do not exceed seating capacity: 6 occupants.

Part Number: 7188582 (English), 7188582F (French Canadian)

24

SAFETY

MAXIMUM PAYLOADWARNING WARNING

The Maximum Payload Warning label is located on the ROPS.

Part number: 7300067 (English), 7300067F (French Canadian)

RANGER NEVER EXCEED IF TOTAL PAYLOAD EXCEEDS

1000 40 mph (64 kph) 550 lbs (250 kg)

1000 25 mph (40kph) 1050 lbs (476 kg)

1000 CA 40 mph (64 kph) 550 lbs (250 kg)

1000 CA 25 mph (40kph) 1050 lbs (476 kg)

CREW 1000 40 mph (64 kph) 970 lbs (440 kg)

CREW 1000 CA 40 mph (64 kph) 970 lbs (440 kg)

CAUTION To avoid transmission damage, shift only when vehicle is stationary and at idle. When vehicle is stopped, place shift in parked position.

PASSENGER/ TIRE PRESSURE WARNING Standard Models The Passenger/ Tire Pressure Warning is located on the cargo box.

25

SAFETY

WARNING Never carry passengers in cargo box. Passengers can be thrown off. This can cause serious injury or death.

If total payload is greater than 500 lbs, the vehicle must be operated in LOW range.

WARNING IMPROPER TIRE PRESSURE OR OVERLOADING CAN CAUSE LOSS OF CONTROL RESULTING IN SERIOUS INJURY OR DEATH. Reduce speed and allow greater distance for braking when carrying cargo.

Overloading or carrying tall, off- center, or unsecured loads will increase your risk of losing control. Loads should be centered and carried as low as possible in box.

For stability on rough or hilly terrain, reduce speed and cargo.

RANGER CREW 1000

CA CREW 1000

MAXIMUM CARGO BOX LOAD 1000 lbs (454 Kg) 600 lbs (272 Kg)

TIRE PRESSURE IN PSI (KPa)

Front 16 (110) Rear 20 (138)

Front 16 (110) Rear 20 (138)

MAXIMUM WEIGHT CAPACITY INCLUDES WEIGHT OF OPERATOR, PASSENGER, CARGO, AND ACCESSORIES

1750 lbs. (794 Kg) 1350 lbs. (612 Kg)

Read Operation & Maintenance Manual for more detailed loading information.

Part number: 7300069 (English), 7300069F (French Canadian)

26

SAFETY

27

SAFETY

PASSENGER/ TIRE PRESSURE WARNING Premium Models The Passenger/ Tire Pressure Warning is located on the cargo box.

WARNING Never carry passengers in cargo box. Passengers can be thrown off. This can cause serious injury or death.

If total payload is greater than 500 lbs, the vehicle must be operated in LOW range.

WARNING IMPROPER TIRE PRESSURE OR OVERLOADING CAN CAUSE LOSS OF CONTROL RESULTING IN SERIOUS INJURY OR DEATH. Reduce speed and allow greater distance for braking when carrying cargo.

Overloading or carrying tall, off- center, or unsecured loads will increase your risk of losing control. Loads should be centered and carried as low as possible in box.

For stability on rough or hilly terrain, reduce speed and cargo.

RANGER CREW 1000

CA CREW 1000

MAXIMUM CARGO BOX LOAD 1000 lbs (454 Kg) 600 lbs (272 Kg)

TIRE PRESSURE IN PSI (KPa)

Front 16 (110) Rear 18 (124)

Front 16 (110) Rear 18 (124)

MAXIMUM WEIGHT CAPACITY INCLUDES WEIGHT OF OPERATOR, PASSENGER, CARGO, AND ACCESSORIES

1750 lbs. (794 Kg) 1350 lbs. (612 Kg)

Read Operation & Maintenance Manual for more detailed loading information.

Part number: 7300388 (English), 7300388F (French Canadian)

28

SAFETY

AIR FILTER CAUTION The Air Filter Caution label is located on the air filter housing.

CAUTION Use a Polaris approved air filter. The use of a non-Polaris approved air filter may cause engine damage. Before installing filter, ensure there is no dirt or debris in the clean side of the intake tube. The air filter must be properly seated before the lid is reinstalled. Please reference your owners manual for additional information regarding air filter service.

Part Number 7182652 (English), 7182652F (French Canadian)

RANGER CREW 1000 MACHINERY DIRECTIVE SAFETY LABELS AND LOCATIONS Warning labels have been placed on the vehicle for your protection. Read and follow the instructions of the labels on the vehicle carefully. If any of the labels depicted in this manual differ from the labels on your vehicle, always read and follow the instructions of the labels on the vehicle.

If any label becomes illegible or comes off, contact your POLARIS dealer to purchase a replacement. Replacement safety labels are provided by POLARIS at no charge. The part number is printed on the label.

CLUTCH COVER ALERT The Clutch Cover Alert decal is located on the clutch cover

CAUTION Read your owners manual. Keep body parts away from belt.

Part number: 7181427

29

SAFETY

INTAKE ALERT The Intake Alert Caution label is located on the air intake.

CAUTION Use a Polaris approved air filter. The use of a non-Polaris approved air filter may cause engine damage. Before installing filter ensure there is no dirt or debris in the clean side of the intake tube. The air filter must be properly seated and the hinges fully inserted when the lid is reinstalled. Please reference your owners manual for additional information regarding the air filter service.

Part number: 7185975

GENERAL ALERT The General Alert decal is location on the cargo box.

WARNING Read your owners manual. Never allow anyone under 16 years of age to operate this vehicle. Never use alcohol or drugs before or while driving or riding. Do not allow operation on public roads (unless designated for off-highway vehicle access). Wear approved helmet, goggles, and protective clothing. Always wear seat belts. Always use the cab nets or doors. Never exceed seating capacity.

Part number: 7187455

30

SAFETY

SHIFTALERT The Shift Alert is located on the console.

WARNING To avoid transmission damage, shift only when vehicle is stationary and at idle. APPLY BRAKE TO START. When this vehicle is not in operation, or unattended, place shift in the park position.

Part number: 7188513

31

SAFETY

LOAD/PASSENGER/TIRE PRESSURE ALERT Never carry passengers in cargo box. Passengers can be thrown off. This can cause serious injury or death. Read owner's manual. NEVER carry fuel or other flammable liquids on this vehicle. Failure to follow this instruction could lead to serious burn injuries or death.

RANGER TR

MAXIMUM CARGO BOX LOAD 454 kg

TIRE PRESSURE IN kPa (bar) FRONT 69 kPa (0,69 bar) REAR 97 kPa (0,97 bar)

32

SAFETY

TIRE PRESSURE WITH FULL LOAD (MAX CARGO + PASSENGER) IN kPa (bar)

FRONT 69 kPa (0,69 bar) REAR 170 kPa (1,7 bar)

MAXIMUMWEIGHT CAPACITY INCLUDES WEIGHT OF OPERATOR, PASSENGER, CARGO AND ACCESSORIES

598 kg

Read Operation and Maintenance Manual for more detailed loading information.

RANGER EU/ZUG

MAXIMUM CARGO BOX LOAD 454 kg

TIRE PRESSURE IN kPa (bar) FRONT 69 kPa (0,69 bar) REAR 97 kPa (0,97 bar)

TIRE PRESSURE WITH FULL LOAD (MAX CARGO + PASSENGER) IN kPa (bar)

FRONT 69 kPa (0,69 bar) REAR 210 kPa (2,1 bar)

MAXIMUMWEIGHT CAPACITY INCLUDES WEIGHT OF OPERATOR, PASSENGER, CARGO AND ACCESSORIES

738 kg

Read Operation and Maintenance Manual for more detailed loading information.

RANGER CREW, EU

MAXIMUM CARGO BOX LOAD 454 kg

TIRE PRESSURE IN kPa (bar) FRONT 69 kPa (0,69 bar) REAR 110 kPa (1,10 bar)

TIRE PRESSURE WITH FULL LOAD (MAX CARGO + PASSENGER) IN kPa (bar)

FRONT 69 kPa (0,69 bar) REAR 210 kPa (2,10 bar)

MAXIMUMWEIGHT CAPACITY INCLUDES WEIGHT OF OPERATOR, PASSENGER, CARGO AND ACCESSORIES

794 kg

Read Operation and Maintenance Manual for more detailed loading information.

Part number: 7300061

33

SAFETY

HITCH CAPACITYALERT The Hitch Capacity Alert is located on the hitch receiver.

WARNING Read the owners manual. MAXIMUM DRAWBAR PULL: 3200 N ON LEVEL GROUND MAXIMUM VERTICAL LOAD: 1700 N

Part number: 7183974

34

SAFETY

OPERATOR SAFETY WARNING

Serious injury or death can result if you do not follow these instructions and procedures, which are outlined in further detail within your owner's manual.

Read this entire manual and all labels carefully. Follow the operating procedures described.

Never allow anyone under the age of 16 to operate this vehicle and never allow anyone without a valid driver's license to operate this vehicle.

Do not carry a passenger until you have at least two hours of driving experience with this vehicle.

No person under the age of 12 may ride as a passenger in this vehicle. All riders must be able to sit with backs against the seat, both feet flat on the floor and both hands on the steering wheel (if driving) or on a passenger hand hold (if equipped).

The driver and all passengers must wear helmet, eye protection, gloves, long- sleeve shirt, long pants, over-the-ankle boots and seat belt at all times.

Always use the cab nets (or doors) while riding in this vehicle. Always keep hands and feet inside the vehicle at all times. Always keep both hands on the steering wheel and both feet on the floorboards of the vehicle during operation.

Never permit a guest to operate this vehicle unless the guest has read this manual and all product labels.

To reduce rollover risk, be especially careful when encountering obstacles and slopes and when braking on hills or during turns.

This vehicle is approved for on-road operation. Never consume alcohol or drugs before or while operating this vehicle. Never operate at excessive speeds. Always travel at a speed proper for the terrain, visibility and operating conditions, and your experience.

Never attempt jumps or other stunts. Always inspect the vehicle before each use to make sure it's in safe operating condition. Always follow the inspection procedures described in this manual.

Always travel slowly and use extra caution when operating on unfamiliar terrain. Be alert to changing terrain.

Never operate on excessively rough, slippery or loose terrain. Always follow proper procedures for turning. Practice turning at slow speeds before attempting to turn at faster speeds. Never turn at excessive speeds.

Always have this vehicle checked by an authorized POLARIS dealer if it has been involved in an accident.

Never operate this vehicle on hills too steep for the vehicle or for your abilities. Practice on smaller hills before attempting larger hills.

35

SAFETY

Always follow proper procedures for climbing hills as described in this manual. Check the terrain carefully before attempting to climb a hill. Never climb hills with excessively slippery or loose surfaces. Never apply throttle suddenly. Never make sudden gear changes. Never go over the top of a hill at high speed.

Always follow the proper procedures outlined in this manual for traveling downhill and for braking on hills. Check the terrain carefully before descending a hill. Never travel downhill at high speed. Avoid going downhill at an angle, which would cause the vehicle to lean sharply to one side. Travel straight down the hill where possible.

Always check for obstacles before operating in a new area. Never attempt to operate over large obstacles such as large rocks or fallen trees. Always follow the proper procedures outlined in this manual when operating over obstacles.

Always be careful of skidding or sliding. On slippery surfaces such as ice, travel slowly and exercise caution to reduce the chance of skidding or sliding out of control.

Never operate your vehicle in fast-flowing water or in water deeper than that specified in this manual. Wet brakes may have reduced stopping ability. Test your brakes after leaving water. If necessary, apply them lightly several times to let friction dry out the pads.

Always be sure there are no obstacles or people behind your vehicle when operating in reverse. When its safe to proceed in reverse, move slowly. Avoid turning at sharp angles in reverse.

Always use the proper size and type of tires specified in this manual. Always maintain proper tire pressure as specified on safety labels.

Never modify this vehicle through improper installation or use of non- POLARIS approved accessories.

Never exceed the stated load capacity for this vehicle. Cargo should be properly distributed and securely attached. Reduce speed and follow the instructions in this manual for hauling cargo or pulling a trailer. Allow a greater distance for braking.

Always place the transmission in PARK before getting out of the vehicle. Always engage the park brake when leaving the vehicle unattended. Always stop the engine before refueling. Remove flammable material containers from the box before filling them with fuel. Make sure the refueling area is well ventilated and free of any source of flame or sparks. Gasoline is extremely flammable.

Always remove the ignition key when the vehicle is not in use to prevent unauthorized use by someone under the age of 16 or without a drivers license and proper training, or accidental starting.

36

SAFETY

EQUIPMENT MODIFICATIONS Do not install any non-POLARIS approved accessory or modify the vehicle for the purpose of increasing speed or power. Any modifications or installation of non-POLARIS approved accessories could create a substantial safety hazard and increase the risk of bodily injury.

The warranty on your POLARIS vehicle will be terminated if any non-POLARIS approved equipment and/or modifications have been added to the vehicle that increase speed or power.

The addition of certain accessories, including (but not limited to) mowers, blades, tires, sprayers, or large racks, may change the handling characteristics of the vehicle. Use only POLARIS-approved accessories, and familiarize yourself with their function and effect on the vehicle.

For more information about safety, contact an authorized POLARIS dealer or visit the POLARIS web site at http://www.polaris.com

37

SAFETY

PROPER OPERATION Failure to operate the RANGER properly can result in a collision, loss of control, accident or rollover, which may result in serious injury or death. Heed all safety warnings outlined in this section of the owners manual. See the OPERATION section of the owners manual for proper operating procedures.

OPERATING WITHOUT INSTRUCTION Operating this vehicle without proper instruction increases the risk of an accident. The operator must understand how to operate the vehicle properly in different situations and on different types of terrain. All operators must read and understand the Owner's Manual and all warning and instruction labels before operating the vehicle.

38

SAFETY

AGE RESTRICTIONS This vehicle is an ADULT VEHICLE ONLY. NEVER operate this vehicle if you are under age 16 and NEVER operate without a valid drivers license. Never operate with a passenger under the age of 12. All riders must be able to sit with backs against the seat, both feet flat on the floor and both hands on the steering wheel (if driving) or on a passenger hand hold (if equipped).

USING ALCOHOL OR DRUGS Never consume alcohol or drugs before or while operating this vehicle.

Operating this vehicle after consuming alcohol or drugs could adversely affect operator judgment, reaction time, balance and perception.

39

SAFETY

SEAT BELTS Riding in this vehicle without wearing the seat belt increases the risk of serious injury in the event of rollover, loss of control, other accident or sudden stop. Seat belts may reduce the severity of injury in these circumstances. All riders must wear seat belts at all times.

PROTECTIVE APPAREL Riding in this vehicle without wearing an approved helmet and protective eyewear increases the risk of a serious injuries in the event of an accident. Operator and all passenger must always wear an approved helmet that fits properly and eye protection (goggles or face shield).

JUMPS AND STUNTS CAUTION

Exhibition driving increases the risk of an accident or rollover. DO NOT do power slides, donuts, jumps or other driving stunts. Avoid exhibition driving.

CAB NETS Riding in this vehicle without using the cab nets (or doors, if equipped) increases the risk of serious injury or death in the event of an accident or rollover. Cab nets (or doors) must be used by both operator and passengers at all times. Make sure all latches are secure before operating the vehicle.

Always inspect cab nets and latches for tightness, wear and damage before each use of the vehicle. Use the strap adjusters to tighten any loose straps. Promptly replace worn or damaged cab nets and latches with new cab nets and latches. Your POLARIS dealer can assist.

40

SAFETY

FAILURE TO INSPECT BEFORE OPERATING WARNING

Failure to inspect and verify that the vehicle is in safe operating condition before operating increases the risk of an accident. Always perform the Pre- Ride Inspection outlined in the Operation chapter before each use of your vehicle to make sure it's in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in this owners manual. See the Periodic Maintenance section of the Maintenance

chapter.

41

SAFETY

OPERATING WITH A LOAD ON THE VEHICLE The weight of the cargo, operator, and passengers impacts vehicle operation and stability. For your safety and the safety of others, carefully consider how your vehicle is loaded and how to safely operate the vehicle. Follow the instructions in this manual for loading, tire pressure, gear selection and speed.

Do not exceed vehicle weight capacities. The vehicles maximum weight capacity is listed in the specifications section of this manual and on a label on the vehicle. When determining the weight you are adding to the vehicle, include the weight of the operator, passengers, accessories, loads in the rack or box and the load on the trailer tongue. The combined weight of these items must not exceed the maximum weight capacity.

The recommended tire pressures are listed in the specifications section of this manual and on a label on the vehicle.

Always follow these guidelines:

UNDER ANY OF THESE CONDITIONS: DO ALL OF THESE STEPS:

Operator and/or cargo exceeds half the maximum weight capacity

1. Slow down.

2. Verify tire pressure.

3. Use extra caution when operating.

Operating in rough terrain

Operating over obstacles

Climbing an incline

Towing

42

SAFETY

HOT EXHAUST SYSTEMS WARNING

Exhaust system components are very hot during and after use of the vehicle. Hot components can cause burns and fire. Do not touch hot exhaust system components. Always keep combustible materials away from the exhaust

system. Use caution when traveling through tall grass, especially dry grass and when traveling through muddy conditions. Always inspect the underside of the vehicle and areas near the exhaust system after driving through tall grass,

weeds, brush, other tall ground cover, and muddy conditions. Promptly remove any grass, debris or foreign matter clinging to the vehicle and pay particular

attention to the exhaust system area.

EXPOSURE TO EXHAUST Engine exhaust fumes are poisonous and can cause loss of consciousness or death in a short time. Never start the engine or let it run in an enclosed area.

The engine exhaust from this product contains chemicals known to cause cancer, birth defects or other reproductive harm. Operate this vehicle only outdoors or in well-ventilated areas.

IMPROPER TIRE MAINTENANCE WARNING

Operating this vehicle with improper tires or with improper or uneven tire pressure could cause loss of control or accident. Always use the size and type of tires specified for your vehicle. Always maintain proper tire pressure as

described in the owner's manual and on safety labels.

UNAUTHORIZED USE OF THE VEHICLE Leaving the keys in the ignition can lead to unauthorized use of the vehicle by someone under the age of 16, without a drivers license, or without proper training. This could result in an accident or rollover. Always remove the ignition key when the vehicle is not in use.

43

SAFETY

TURNING IMPROPERLY CAUTION

Turning improperly could cause loss of traction, loss of control, accident or rollover. Always follow proper procedures for turning as described in this

owners manual.

Avoid sharp turns. Never turn while applying heavy throttle. Never make abrupt steering maneuvers. Practice turning at slow speeds before attempting to turn at faster speeds.

IMPROPER HILL CLIMBING CAUTION

Improper hill climbing could cause loss of control or rollover. Use extreme caution when operating on hills. Always follow proper procedures for hill

climbing as described in this owner's manual.

DESCENDING HILLS IMPROPERLY CAUTION

Improperly descending a hill could cause loss of control or rollover. Always follow proper procedures for traveling down hills as described in this owners

manual.

STALLING WHILE CLIMBING A HILL CAUTION

Stalling or rolling backwards while climbing a hill could cause a rollover. Maintain a steady speed when climbing a hill.

If you lose all forward speed:

Apply the brakes gradually until the vehicle is fully stopped. Place the transmission in reverse and slowly allow the vehicle to roll straight downhill while applying light brake pressure to control speed.

If you begin rolling downhill:

Never apply engine power. Apply the brakes gradually until the vehicle is fully stopped. Place the transmission in reverse and slowly allow the vehicle to roll straight downhill while applying light brake pressure to control speed.

44

SAFETY

SKIDDING OR SLIDING CAUTION

Failure to use extra caution when operating on excessively rough, slippery or loose terrain could cause loss of traction, loss of control, accident or rollover. Do not operate on excessively slippery surfaces. Always slow down and use

additional caution when operating on slippery surfaces.

CAUTION Skidding or sliding due to loss of traction can cause loss of control or rollover (if

tires regain traction unexpectedly). Always follow proper procedures for operating on slippery surfaces as described in this owner's manual.

OPERATING ON FROZEN BODIES OF WATER WARNING

Serious injury or death can result if the vehicle and/or the operator fall through the ice. Never operate the vehicle on a frozen body of water unless you have first verified that the ice is sufficiently thick to support the weight and moving force of the vehicle, you and your cargo, together with any other vehicles in

your party.

Always check with local authorities and residents to confirm ice conditions and thickness over your entire route. Vehicle operators assume all risk associated with ice conditions on frozen bodies of water.

OPERATING A DAMAGED VEHICLE CAUTION

Operating a damaged vehicle can result in an accident. After any rollover or other accident, have a qualified service dealer inspect the entire machine for possible damage, including (but not limited to) seat belts, rollover protection

devices, brakes, throttle, and steering systems.

OPERATING AT EXCESSIVE SPEEDS CAUTION

Operating this vehicle at excessive speeds increases the operator's risk of losing control. Always operate at a speed that's appropriate for the terrain, the

visibility and operating conditions and your skills and experience.

45

SAFETY

OPERATING ON PAVEMENT This vehicle's tires are designed for off-road use only, not for use on pavement. Operating this vehicle on paved surfaces (including sidewalks, paths, parking lots and driveways) may adversely affect the handling of the vehicle and may increase the risk of loss of control and accident or rollover. Avoid operating the vehicle on pavement. If it's unavoidable, travel slowly, travel short distances and avoid sudden turns or stops.

OPERATING IN UNFAMILIAR TERRAIN CAUTION

Failure to use extra caution when operating on unfamiliar terrain could result in an accident or rollover.

CAUTION Unfamiliar terrain may contain hidden rocks, bumps, or holes that could cause

loss of control or rollover.

Travel slowly and use extra caution when operating on unfamiliar terrain. Always be alert to changing terrain conditions.

REFUELING Gasoline is highly flammable and explosive under certain conditions.

Always exercise extreme caution whenever handling gasoline. Always turn off the engine when refueling. Always refuel outdoors or in a well ventilated area free of any source of flame or sparks.

NEVER carry fuel or other flammable liquids on this vehicle. Failure to follow this instruction could lead to serious burn injuries or death.

Do not smoke or allow open flames or sparks in or near the area where refueling is performed or where gasoline is stored.

Do not overfill the tank. Do not fill the tank neck. If gasoline spills on your skin or clothing, immediately wash it off with soap and water and change clothing.

LIGHTNING AND POWERLINES Avoid operating this vehicle when lightning could occur and when near powerlines. Rubber tires, rubber handgrips, and a foam seat will not protect a rider from lightning strikes or electrical surges. Always seek safe shelter when lightning is imminent, and keep a safe distance from powerlines at all times.

46

SAFETY

FEATURES AND CONTROLS RANGER 1000 COMPONENT LOCATIONS

q Console w Headlights e Bumper r Radiator t Tailgate y Taillights u Receiver Hitch

i Air Filter o ROPS Cab Frame a Cargo Box s Fuel Cap d Brake Fluid Reservoir f Fuse Block (under seat)

47

FEATURES AND CONTROLS

RANGER CREW 1000 COMPONENT LOCATIONS

q Console w Headlights e Bumper r Radiator t Tailgate y Taillights u Receiver Hitch

i Air Filter o ROPS Cab Frame a Cargo Box s Fuel Cap d Brake Fluid Reservoir f Fuse Block (under seat)

48

FEATURES AND CONTROLS

CONSOLE

q Instrument Cluster w Gear Selector (Shifter) e AWD Switch r Storage Compartment t 12VAuxiliary Outlet

yBattery Trickle-Charging Outlet u 12VAuxiliary Outlet i Ignition Switch o Steering Wheel Adjustment Lever a Light Switch

49

FEATURES AND CONTROLS

CONSOLE (WINTER PREP MODELS ONLY)

q Instrument Cluster w Gear Selector (Shifter) e AWD Switch r Heater Control Panel t Storage Compartment y 12VAuxiliary Outlet

uBattery Trickle-Charging Outlet i 12VAuxiliary Outlet o Ignition Switch a Steering Wheel Adjustment Lever s Light Switch

STEERING WHEEL The steering wheel can be tilted upward or downward for rider preference. Lift and hold the steering wheel adjustment leverq while moving the steering wheel upward or downward. Release the lever when the steering wheel is at the desired position. Always make sure the steering wheel position does not impede proper operation of the brake pedal, throttle pedal and all other controls.

50

FEATURES AND CONTROLS

GEAR SELECTOR

To change gears, stop the vehicle, and with the engine idling, move the leverq to the desired gear. Do not attempt to shift gears with engine speed above idle or while the vehicle is moving.

H: High Gear L: Low Gear N: Neutral R: Reverse P: Park

Low gear is the primary driving range for the RANGER. High gear is intended for use on hard-packed surfaces with light loads. Whenever the vehicle is left unattended, always place the transmission in PARK.

TIP Maintaining shift linkage adjustment is important to assure proper transmission function. Your POLARIS dealer can assist in resolving any shifting problems.

NOTICE

Do not attempt to shift the transmission while the vehicle is moving or damage to the transmission could result. Always shift when the vehicle is stationary and

the engine is at idle.

51

FEATURES AND CONTROLS

USING LOW GEAR Low gear is the primary driving range for the RANGER. High gear is intended for use on hard-packed surfaces with light loads. Whenever the vehicle is left unattended, always place the transmission in PARK.

Always shift into low gear for any of the following conditions.

Operating in rough terrain or over obstacles Loading the vehicle onto a trailer Climbing hills Towing heavy loads Driving slowly - under 10 MPH (16 km/h) Operating with mud Operating a CREW vehicle with more than one passenger

SWITCHES Not all switches are present on every model.

IGNITION SWITCH The ignition switchq is a three-position, key-operated switch. The key can be removed from the switch when it is in the OFF position.

OFF The engine is off. Electrical circuits are off.

ON Electrical circuits are on. Electrical equipment can be used.

START Turn the key to the START position to engage the electric starter. The key returns to the ON position when released.

52

FEATURES AND CONTROLS

IGNITION SWITCH (MACHINE DIRECTIVE MODELS ONLY) The ignition switchq is a three-position, key-operated switch. The key can be removed from the switch when it is in the OFF position.

OFF The engine is off. Electrical circuits are off.

ON Electrical circuits are on. Electrical equipment can be used.

START Turn the key to the START position to engage the electric starter. The key returns to the ON position when released.

LIGHT SWITCH The ignition switch key must be in the ON/RUN position to operate the headlights. Press the top of the rocker switch toward the dash to place the headlights on high beam. Move the rocker switch to the center position to place the headlights on low beam. Press the bottom of the rocker switch to turn off the headlights.

53

FEATURES AND CONTROLS

DRIVELINE MODE SWITCH The Driveline Mode Switch has three positions: All Wheel Drive (AWD), Differential Lock/Two Wheel Drive (2WD) and Off (Turf Mode).

q AWD: Press the top of the switch to engage All Wheel Drive (AWD). w 2WD:Move the switch to the center position to lock the differential and operate in two wheel drive (2WD). e TURF Mode: Press the bottom of the switch for Turf Mode (unlocked differential power). In Turf Mode, the rear drive wheels operate independently (1WD) depending on tire traction. This mode of operation is well suited to turf driving or when active traction is not needed.

WINCH SWITCH Press the top of the rocker switch to spool line out from the winch. Press the bottom of the rocker switch to spool line in to the winch. Move the rocker switch to the center position to stop spooling.

WIRELESS WINCH REMOTE (IF EQUIPPED) Press and hold the OUT button on the switch to spool line out from the winch. Press and hold the IN button of the switch to spool line in to the winch. Release either button to stop spooling.

54

FEATURES AND CONTROLS

AUXILIARY OUTLET The vehicle is equipped with 12volt accessory outlets on the dash. Use the outlets to power an auxiliary light or other optional accessories or lights. For service, the dash outlet connection is under the dash.

BATTERY TRICKLE-CHARGING OUTLET The vehicle is equipped with a dedicated outlet for trickle-charging the battery during periods of extended inactivity.

If you do not drive the vehicle for more than TWO WEEKS, Polaris recommends using a BatteryMINDer 2012 AGM - 2 AMP charger (PN 2415295), which can be ordered through your dealer.

Polaris provides a charging accessory with your vehicle that allows easy connection to the battery through the Battery Trickle-Charging Outlet, located on the dash. While charging, place the charger outside of the vehicle and protect it from moisture.

55

FEATURES AND CONTROLS

FOOT PEDALS

BRAKE PEDAL Depress the brake pedalq to slow or stop the vehicle. Apply the brakes while starting the engine.

When the brake pedal is depressed, the brake light comes on. Check the brake light before each ride.

1. Turn the ignition switch to the ON position.

2. Apply the brakes. The brake light should come on after about 10 mm (0.4 in.) of pedal travel.

THROTTLE PEDAL Push the throttle pedalw down to increase engine speed. Spring pressure returns the pedal to the rest position when released. Always check that the throttle pedal returns normally before starting the engine.

TIP If the throttle pedal and brake pedal are applied simultaneously, engine power

may be limited.

56

FEATURES AND CONTROLS

SEATING - STANDARD/ STANDARD - EPS MODELS SEAT REMOVAL To access the under-seat area, pull the rear edge of a seat upward to release the latch pins from the grommets. Then roll the seat forward.

To completely remove a seat, roll the seat forward and lift the seat tabs from the seat base mounts.

Always make sure all seats are properly installed and securely latched before operating. Push down firmly on the rear of each seat until the latch pins are fully seated into the grommets.

SEAT BELT INSPECTION Inspect all seat belts for proper operation before each use of the vehicle.

1. Push the latch plate into the buckle until it clicks. The latch plate must slide smoothly into the buckle. A click indicates that it's securely latched.

2. Push the red release latch in the middle of the buckle to make sure it releases freely.

3. Pull each seat belt completely out and inspect the full length for any damage, including cuts, wear, fraying or stiffness. If any damage is found, or if the seat belt does not operate properly, have the seat belt system checked and/or replaced by an authorized dealer.

4. To clean dirt or debris from the seat belts, sponge the straps with mild soap and water. Do not use bleach, dye or household detergents. Rinse the entire length of the belt webbing. Use a garden hose to flush out the retractor and latch housings regularly.

57

FEATURES AND CONTROLS

SEAT BELTS

This vehicle is equipped with three-point lap and diagonal seat belts for the operator and any passengers. Always make sure the seat belts are secured for all riders before operating. The drivers seat belt is equipped with a seat belt interlock. Vehicle speed will be limited to 15 MPH (24 km/h) if the seat belt is not secured.

WARNING Falling from a moving vehicle could result in serious injury or death. Always fasten your seat belt securely before operating or riding in the vehicle.

To wear the seat belt properly, follow this procedure:

1. For 3-point belts, pull the seat belt latchq downward and across your chest toward the buckle at the inner edge of the seat. The belt should fit snugly across your hips and diagonally across your chest. Make sure the belt is not twisted.

2. Push the latch plateq into the bucklew until it clicks.

3. Release the strap, it will self tighten.

4. To release the seat belt, press the square red button in the buckles center.

58

FEATURES AND CONTROLS

SEATAND STORAGE COMPARTMENTS The electrical compartment is located under the center rear-most seat. Never use this area for storage. Storage compartments are located under all other seats. Remove the storage bin under the right rear-most passenger seat to access the battery.

Pull the rear edge of a seat upward to release the latch pins from the grommets. Roll the seat forward to access the under-seat area. To completely remove a seat, roll the seat forward and lift the seat tabs from the seat base mounts.

Always make sure all seats are properly installed and securely latched before operating. Push down firmly on the rear of each seat until the latch pins are fully seated into the grommets.

59

FEATURES AND CONTROLS

SEATING - PREMIUM MODELS SEAT REMOVAL To remove the drivers seat, lift up on the rear of the seat and rotate the seat base up and forward.

For the passenger seat, pull the rear edge of the seat upward to release the latch pins from the grommets. Then roll the seat forward to access the under- seat area. To completely remove the seat, roll the seat forward and lift the seat tabs from the seat base mounts.

SEAT BELT INSPECTION Inspect all seat belts for proper operation before each use of the vehicle.

1. Push the latch plate into the buckle until it clicks. The latch plate must slide smoothly into the buckle. A click indicates that it's securely latched.

2. Push the red release latch in the middle of the buckle to make sure it releases freely.

3. Pull each seat belt completely out and inspect the full length for any damage, including cuts, wear, fraying or stiffness. If any damage is found, or if the seat belt does not operate properly, have the seat belt system checked and/or replaced by an authorized dealer.

4. To clean dirt or debris from the seat belts, sponge the straps with mild soap and water. Do not use bleach, dye or household detergents. Rinse the entire length of the belt webbing. Use a garden hose to flush out the retractor and latch housings regularly.

60

FEATURES AND CONTROLS

SEAT BELTS

This vehicle is equipped with three-point lap and diagonal seat belts for the operator and any passengers. Always make sure the seat belts are secured for all riders before operating. The drivers seat belt is equipped with a seat belt interlock. Vehicle speed will be limited to 15 MPH (24 km/h) if the seat belt is not secured.

WARNING Falling from a moving vehicle could result in serious injury or death. Always fasten your seat belt securely before operating or riding in the vehicle.

To wear the seat belt properly, follow this procedure:

1. For 3-point belts, pull the seat belt latchq downward and across your chest toward the buckle at the inner edge of the seat. The belt should fit snugly across your hips and diagonally across your chest. Make sure the belt is not twisted.

2. Push the latch plateq into the bucklew until it clicks.

3. Release the strap, it will self tighten.

4. To release the seat belt, press the square red button in the buckles center.

61

FEATURES AND CONTROLS

SEATAND STORAGE COMPARTMENTS The electrical compartment is located under the center rear-most seat. Never use this area for storage. Storage compartments are located under all other seats. Remove the storage bin under the right rear-most passenger seat to access the battery.

Always make sure all seats are properly installed before operating. Push down firmly on the rear of each seat until the latch pins are fully seated into the grommets.

DRIVERS SEAT To access the storage area under the drivers seat, reach behind the drivers seat and pull up on the latch. Roll the bottom of the seat forward toward steering wheel.

PASSENGERS SEAT To access the storage area under the passenger seat, pull the rear edge of the seat upward to release the latch pins from the grommets. Roll the seat forward to access the under-seat area. To completely remove the seat, roll the seat forward and lift the seat tabs from the seat base mounts.

62

FEATURES AND CONTROLS

ELECTRONIC POWER STEERING (IF EQUIPPED) Electronic power steering (EPS) engages when the ignition key is turned to the ON position. EPS remains engaged whether the vehicle is moving or idle. To conserve battery power, the EPS will shut down 5 minutes after the engine is stopped if the key remains in the ON position. The EPS warning indicator will illuminate to indicate the EPS has shut down. Turn the key off and on to reset the unit. If the light remains on after starting the engine, the EPS system is inoperative. See your POLARIS dealer, or other qualified person, as soon as possible for repair. Continued operation could result in permanent damage to the EPS unit and increased steering effort.

FUEL CAP The fuel tank filler capq is located on the left-hand side of the vehicle near the drivers seat. To close, tighten the fuel cap until it clicks twice. When refueling, always use either leaded or unleaded gasoline with a minimum pump octane number of 87 R+M/2 octane. Do not use fuel with ethanol content greater than 10 percent, such as E-85 fuel.

Always ensure that the fuel tank filler cap is fully tightened and secure before operating or transporting the vehicle.

CAB NETS (IF EQUIPPED) WARNING

Riding in this vehicle without using the cab nets (or doors, if equipped) increases the risk of serious injury or death in the event of an accident or

rollover. Cab nets (or doors) must be used by both operator and passengers at all times. Make sure all latches are secure before operating the vehicle

Always inspect cab nets and latches for tightness, wear and damage before each use of the vehicle. Use the strap adjusters to tighten any loose straps. Promptly replace worn or damaged cab nets and latches with new cab nets and latches. Your POLARIS dealer or qualified technician can assist.

63

FEATURES AND CONTROLS

SECURING THE NET 1. Position the lower net rod into the mount at floor level.

2. Connect the latch at the top edge of the net to the receiver latch mounted on the front frame.

OPENING THE NET 1. To exit the vehicle, release the top front latch.

2. Rotate the net rearward and slide the lower net rod out of the mount to remove it.

3. Allow the net to hang freely outside the vehicle while dismounting.

ROLLOVER PROTECTIVE STRUCTURE (ROPS) The Rollover Protective Structure (ROPS) on this vehicle meets OSHA 1928.53 rollover performance requirements. Always have your authorized dealer thoroughly inspect the ROPS if it ever becomes damaged in any way.

No device can assure occupant protection in the event of a rollover. Always follow all safe operating practices outlined in this manual to avoid vehicle rollover.

WARNING Vehicle rollover could cause severe injury or death. Always avoid operating in

a manner that could result in vehicle rollover.

HOOD LATCHES To remove the hood, rotate the hood latchesq 1/4-turn and lift the hood away from the vehicle.

64

FEATURES AND CONTROLS

TRAILER HITCH BRACKET This vehicle is equipped with a receiver hitch bracket for a trailer hitch. Trailer towing equipment is not supplied with this vehicle.

To avoid injury and property damage, always heed the warnings and towing capacities.

65

FEATURES AND CONTROLS

INSTRUMENT CLUSTER OVERVIEW

NOTICE Features and telltales vary by model.

DISPLAYAREA FUNCTION

q Gear Indicator H = High Gear L = Low Gear N = Neutral R = Reverse Gear P = Park = Gear Signal Error (or shifter between gears)

w Display Area 2 This area displays odometer, trip meter, trip meter 2, voltage, engine temperature, engine hour meter, programmable service hour interval, ground speed, or engine RPM.

e Display Area 1 This area displays engine RPM, ground speed, or coolant temperature.

r Fuel Gauge The segments of the fuel gauge show the level of fuel in the fuel tank. When the last segment clears, a low fuel warning is activated. All segments including the fuel icon will flash. Refuel immediately.

66

FEATURES AND CONTROLS

DISPLAYAREA FUNCTION

t Service Indicator A flashing wrench symbol alerts the operator that the preset service interval has been reached. Your POLARIS dealer can provide scheduled maintenance. See page 83 for more information.

y Clock The clock displays time in a 12-hour or 24-hour format.

u Driveline Mode Indicator

Segments of the indicator illuminate based on driveline mode engaged.

INDICATOR LAMPS INDICATOR ICON FUNCTION Check Engine This indicator appears if a fault occurs.

Do not operate the vehicle if this warning appears. Serious engine damage could result. Your authorized POLARIS dealer can assist.

EPS Warning (if equipped)

This indicator illuminates when a fault has occurred in the EPS system. Your authorized POLARIS dealer can assist. EPS operation is possible with key on/ engine off for up to 5 minutes.

Engine Hot This lamp illuminates to indicate an overheated engine. If the indicator flashes, a severe overheating condition exists.

Neutral This lamp illuminates when the transmission is in neutral and the ignition key is in the ON position.

Helmet/Seat Belt

This lamp flashes for several seconds when the key is turned to the ON position. The lamp is a reminder to wear helmet and seat belt (if equipped) before operating.

67

FEATURES AND CONTROLS

INDICATOR ICON FUNCTION High Beam This lamp illuminates when the headlamp

switch is set to high beam.

Brake Failure (if equipped)

Lamp illuminates when Brake System (if Brake Failure Alarm is equipped) detects low fluid level in brake hydraulic system. Verify brake fluid in reservoir.

68

FEATURES AND CONTROLS

DISPLAYAREA 1 Pressing the MODE button will change the information displayed in Area 1q.

DISPLAYAREA 1 FUNCTION

Speed The vehicles speed will be displayed in mph, or km/h.

Engine Temperature

The vehicles current engine temperature will be displayed.

RPM The vehicles RPM will be displayed.

69

FEATURES AND CONTROLS

DISPLAYAREA 2 Toggle the Up/Down buttons to change the information displayed in Area 2w.

DISPLAYAREA 2 FUNCTION

Odometer The vehicles odometer reading will be displayed.

Engine Temperature

The vehicle Engine Temperature will be displayed.

Trip 1 The vehicle Trip 1 mileage will be displayed.

Trip 2 The vehicle Trip 2 mileage will be displayed.

RPM The vehicle RPM will be displayed.

Voltage The vehicles current battery voltage will be displayed.

Speed The vehicles current speed will be displayed.

Engine Hours The vehicles engine hours will be displayed.

Service Hours The vehicles service hours will be displayed.

70

FEATURES AND CONTROLS

OPTIONS MENU From the options menu you can view diagnostic codes, access the advanced menu, set the clock, and much more. For a full list of available options see below.

To enter the Options Menu, press and hold the MODE button.

OPTIONS MENU NOTES

Diagnostic Codes Only displays if fault codes are present or stored

Advanced Menu (if equipped) Set maximum speed, and geofencing settings.

Units - Distance Select MPH or KPH

Units - Temp Select between F and C

Clock (if equipped) Select between 12H or 24H, and set time

Backlight Color Select between Blue or Red

Backlight Level Set backlight brightness level

Service Hours View/Set Service hours

Exit Menu Exit

71

FEATURES AND CONTROLS

DIAGNOSTIC CODE Diagnostic Code Screen will show available MIL that has come on during that ignition cycle.

To access the Diagnostic Code Screen, do the following:

1. Press and hold the MODE button to enter the Options Menu. OPTIONS will display on the screen for 3 seconds before showing first menu item.

2. Select Diagnostic Codes from the Options Menu by pressing the MODE button.

Toggle the Up/Down Buttons to cycle through Code(s).

NOTICE

This option will only be available if a fault code was set or is active during the current ignition key 'on' cycle. Turning off the ignition will clear any save fault

codes from the gauge.

q Display area 1 will show FMI w Display area 2 will show SPN e Clock Area will show Count.

72

FEATURES AND CONTROLS

NOTICE When the gauge is displaying a fault code, the warning telltale (check engine

or EPS) will blink to indicate which controller set the fault code.

3. To exit the Options Menu the user can select Exit Menu function from Options Menu, can hold Mode Button and exit out of Options Menu, or not press any button for 10 seconds, which will exit out of the Options Menu.

DIAGNOSTIC DISPLAY CODE DEFINITIONS Open Load:There is a break in the wires that lead to the item listed in the chart (injector, fuel pump, etc.), or the item has failed.

Short-to-Ground:The wire is shorted to ground between the electronic control unit and the item listed in the chart.

Shorted Load:The wires leading to the item listed in the chart are shorted together, or the item has shorted internally.

Short-to-Battery:The wire leading from the item listed in the chart to the electronic control unit is shorted to a wire at battery voltage.

DIAGNOSTIC CODES

COMPONENT CONDITION SPN FMI

Throttle Position Sensor

Voltage Too High 51 3

Voltage Too Low 51 4

Engine Temperature Sensor

Voltage Too High 110 3

Voltage Too Low 110 4

Temperature Too High 110 16

Engine Overheat Shutdown 110 0

Intake Air Temperature Sensor

Voltage Too High 105 3

Voltage Too Low 105 4

Manifold Absolute Pressure Sensor

Voltage Too High 102 3

Voltage Too Low 102 4

Signal Out of Range 102 2

Crankshaft Position Sensor

Circuit Fault 636 8

Plausibility Fault 636 2

73

FEATURES AND CONTROLS

DIAGNOSTIC CODES

COMPONENT CONDITION SPN FMI

Vehicle Speed Signal Speed Too High 84 8

Plausibility Fault 84 2

Gear Sensor Signal Voltage Too Low 523 4

Voltage Too High 523 3

Signal Fault 523 2

Injector 1 (MAG) (SDI Part Load)

Driver Circuit Open/ Grounded 651 5

Driver Circuit Short to B+ 651 3

Driver Circuit Grounded 651 4

Injector 2 (PTO) (SDI Part Load)

Driver Circuit Open/ Grounded 652 5

Driver Circuit Short to B+ 652 3

Driver Circuit Grounded 652 4

Ignition Coil Primary Driver 1 (MAG)

Driver Circuit Short to B+ 1268 3

Ignition Coil Primary Driver 2 (PTO)

Driver Circuit Short to B+ 1269 3

Fuel Pump Driver Circuit

Driver Circuit Open/ Grounded 1347 5

Driver Circuit Short to B+ 1347 3

Driver Circuit Grounded 1347 4

Fan Relay Driver Circuit

Driver Circuit Open/ Grounded 1071 5

Driver Circuit Short to B+ 1071 3

Driver Circuit Grounded 1071 4

Idle Air Control Driver Circuit Open/ Grounded 634 5

74

FEATURES AND CONTROLS

DIAGNOSTIC CODES

COMPONENT CONDITION SPN FMI

Driver Circuit Short to B+ 634 3

Driver Circuit Grounded 634 4

Position Out of Range 634 7

Starter Enable Circuit Driver Circuit Open/ Grounded 1321 5

Driver Circuit Short to B+ 1321 3

Driver Circuit Grounded 1321 4

Chassis Relay Driver Circuit Open/ Grounded 520208 5

Driver Circuit Short to B+ 520208 3

Driver Circuit Grounded 520208 4

All Wheel Drive Control

Driver Circuit Open/ Grounded 520207 5

Driver Circuit Short to B+ 520207 3

Driver Circuit Grounded 520207 4

System Power Voltage Too High 168 3

Voltage Too Low 168 4

Throttle Safety Signal Voltage Too High 520194 3

Voltage Too Low 520194 4

Signal Out of Range 520194 2

Throttle Stuck 520194 7

Active Descent Control System

Driver Circuit Open/ Grounded 520203 5

Driver Circuit Short to B+ 520203 3

75

FEATURES AND CONTROLS

DIAGNOSTIC CODES

COMPONENT CONDITION SPN FMI

Driver Circuit Grounded 520203 4

Idle Speed Speed Too High 520211 3

Speed Too Low 520211 4

Right Hand Control Momentary Driveline Mode Switch Press 520468 31

DIAGNOSTIC CODES

COMPONENT CONDITION SPN FMI

EPS MODELS ONLY

Vehicle Speed Sensor Data Valid But Above Normal Operational Range - Most Severe Level

84 0

Data Erratic, Intermittent Or Incorrect

84 2

Abnormal Rate Of Change 84 10

Received Network Data In Error 84 19

System Power Data Valid But Above Normal Operational Range - Most Severe Level

168 0

Voltage Above Normal, Or Shorted To High Source

168 3

Voltage Below Normal, Or Shorted To Low Source

168 4

Engine Speed Data Valid But Above Normal Operational Range - Most Severe Level

190 0

Data Erratic, Intermittent Or Incorrect

190 2

76

FEATURES AND CONTROLS

DIAGNOSTIC CODES

COMPONENT CONDITION SPN FMI

EPS MODELS ONLY

Received Network Data In Error 190 19

ECU Memory Bad Intelligent Device Or Component 628 12

Out Of Calibration 628 13

Calibration Out Of Calibration 630 13

Steering Over Current Shut Down

Current Above Normal Or Grounded Circuit 520221 6

Steering Excessive Current Error

Current Above Normal Or Grounded Circuit 520222 6

Steering Torque Partial Failure

Condition Exists 520223 31

Steering Torque Full Failure

Condition Exists 520224 31

EPAS Inverter Temperature

Data Valid But Above Normal Operational Range - Most Severe Level

520225 0

Data Valid But Above Normal Operating Range - Moderately Severe Level

520225 16

EPAS Communications Receive Data Error

Data Erratic, Intermittent Or Incorrect

520226 2

Condition Exists 520226 31

Position Encoder Error

Root Cause Not Known 520228 11

Bad Intelligent Device Or Component 520228 12

Condition Exists 520228 31

EPAS Software Error Bad Intelligent Device Or Component 520229 12

Condition Exists 520229 31

EPAS Power Save Condition

Condition Exists 520231 31

77

FEATURES AND CONTROLS

DIAGNOSTIC CODES

COMPONENT CONDITION SPN FMI

EPS MODELS ONLY

EPS SEPIC Voltage Error

Voltage Above Normal, Or Shorted To High Source

524086 3

Voltage Below Normal, Or Shorted To Low Source

524086 4

UNIT SELECTION DISTANCE

1. Press and hold the MODE button to enter the Options Menu.

NOTICE

OPTIONS will display on the screen for 3 seconds before showing first menu item.

2. Select Units-Distance from the Options Menu by pressing the MODE button.

Reference the image shown above:

q Press the MODE button.

w Toggle the Up/Down Buttons to change the units (MPH or KPH)

eWith the correct unit displayed, Press the mode button which will set the unit and return to the Options Menu.

3. To exit the Options Menu the user can select Exit Menu function from Options Menu, can hold Mode Button and exit out of Options Menu, or not press any button for 10 seconds, which will exit out of the Options Menu.

78

FEATURES AND CONTROLS

UNIT SELECTION TEMPERATURE

1. Press and hold the MODE button to enter the Options Menu.

NOTICE

OPTIONS will display on the screen for 3 seconds before showing first menu item.

2. Select Units - Temp from the Options Menu by pressing the MODE button.

Reference the image shown above:

q Press the MODE button.

w Toggle the Up/Down Buttons to change the units (F or C)

eWith the correct unit displayed, Press the mode button which will set the unit and return to the Options Menu.

3. To exit the Options Menu the user can select Exit Menu function from Options Menu, can hold Mode Button and exit out of Options Menu, or not press any button for 10 seconds, which will exit out of the Options Menu.

79

FEATURES AND CONTROLS

CLOCK

1. Press and hold the MODE button to enter the Options Menu.

NOTICE

OPTIONS will display on the screen for 3 seconds before showing first menu item.

2. Select Clock from the Options Menu by pressing the MODE button.

Reference the image shown above: q Press the MODE button. w Toggle the Up/Down Buttons to change the units (12H or 24H) eWith the correct unit displayed, Press the mode button which will set the unit. r Toggle the Up/Down Buttons to change the units (Cycles Hours) tWith the correct unit displayed, Press the mode button which will set the unit. y Toggle the Up/Down Buttons to change the units (Cycles 10s of Minutes) uWith the correct unit displayed, Press the mode button which will set the unit. i Toggle the Up/Down Buttons to change the units (Cycles 1s of Minutes) oWith the correct unit displayed. Press the mode button which will set the unit and return to the Options menu.

3. To exit the Options Menu the user can select Exit Menu function from Options Menu, can hold Mode Button and exit out of Options Menu, or not press any button for 10 seconds, which will exit out of the Options Menu.

80

FEATURES AND CONTROLS

BACK LIGHT COLOR

1. Press and hold the MODE button to enter the Options Menu.

NOTICE

OPTIONS will display on the screen for 3 seconds before showing first menu item.

2. Select Backlight Color from the Options Menu by pressing the MODE button.

Reference the image shown above:

q Press the MODE button.

w Toggle the Up/Down Buttons to change the units (Blue or Red)

eWith the correct unit displayed, Press the mode button which will set the unit and return to the Options Menu.

3. To exit the Options Menu the user can select Exit Menu function from Options Menu, can hold Mode Button and exit out of Options Menu, or not press any button for 10 seconds, which will exit out of the Options Menu.

81

FEATURES AND CONTROLS

BACK LIGHT LEVEL

1. Press and hold the MODE button to enter the Options Menu.

NOTICE

OPTIONS will display on the screen for 3 seconds before showing first menu item.

2. Select Backlight Level from the Options Menu by pressing the MODE button.

Reference the image shown above:

q Press the MODE button.

w Toggle the Up/Down Buttons to change the units (Increase or De- crease Level)

eWith the correct unit displayed, Press the mode button which will set the unit and return to the Options Menu.

3. To exit the Options Menu the user can select Exit Menu function from Options Menu, can hold Mode Button and exit out of Options Menu, or not press any button for 10 seconds, which will exit out of the Options Menu.

82

FEATURES AND CONTROLS

SERVICE HOURS

1. Press and hold the MODE button to enter the Options Menu.

NOTICE

OPTIONS will display on the screen for 3 seconds before showing first menu item.

2. Select Service Hours from the Options Menu by pressing the MODE button.

Reference the image shown above:

q Press the MODE button.

w Toggle the Up/Down Buttons to change the units (0, 5, 10 - 95, 100)

eWith the correct unit displayed, press the MODE button, which will set the unit and return you to the Options Menu.

NOTICE

To reset service hours after they have counted down to "0.0", reselect the existing setpoint or select a new service hour value.

3. To exit the Options Menu the user can select Exit Menu function from Options Menu, can hold Mode Button and exit out of Options Menu, or not press any button for 10 seconds, which will exit out of the Options Menu.

83

FEATURES AND CONTROLS

84

OPERATION IMPORTANT INFORMATION

WARNING Failure to operate the vehicle properly can result in a collision, loss of control, accident or rollover, which may result in serious injury or death. Read and understand all safety warnings outlined in the safety section of this owners

manual.

VEHICLE BREAK-IN PERIOD The break-in period for your new vehicle is the first 25 hours of operation, or the time it takes to use the first 2 full tanks of gasoline. No single action on your part is as important as a proper break-in period. Careful treatment of a new engine will result in more efficient performance and longer life for the engine. Perform the following procedures carefully.

NOTICE

Excessive heat build-up during the first 3 hours of operation will damage close- fitted engine parts and drive components. Do not operate at full throttle or high

speeds during the first 3 hours of use.

ENGINE AND DRIVETRAIN BREAK-IN 1. Fill the fuel tank with gasoline. Always exercise extreme caution whenever

handling gasoline.

2. Check the oil level. Add the recommended oil as needed to maintain the oil level in the safe operating range.

3. Complete the New Operator Driving Procedures.

4. Avoid aggressive use of the brakes.

5. Vary throttle positions. Do not operate at sustained idle.

6. Pull only light loads.

7. Perform regular checks on fluid levels, controls and areas outlined on the daily pre-ride inspection checklist.

8. During the break-in period, change both the oil and the filter at 25 hours or one month.

9. Check fluid levels of transmission and all gearcases after the first 25 hours of operation and every 100 hours thereafter.

85

OPERATION

BRAKE SYSTEM BREAK-IN Apply only moderate braking force for the first 50 stops. Aggressive or overly forceful braking when the brake system is new could damage brake pads and rotors.

PVT BREAK-IN (CLUTCHES/BELT) A proper break-in of the clutches and drive belt will ensure a longer life and better performance. Break in the clutches and belt by operating at slower speeds, in L gear, during the break-in period as recommended. Pull only light loads. Avoid aggressive acceleration and high speed operation during the break-in period.

If a belt fails, always clean any debris from the PVT intake and outlet duct and from the clutch and engine compartments when replacing the belt.

KNOW YOUR RIDING AREA/TREAD LIGHTLY Familiarize yourself with all laws and regulations concerning the operation of this vehicle in your area. Respect the environment in which you ride your vehicle. Find out where the designated riding areas are by contacting your POLARIS dealer, a local riding club, or local officials.

Help keep our trails open for recreational vehicle use. As an off-road enthusiast, you represent the sport and can set a good example (or a poor example) for others to follow. Tread lightly Operate with respect for the terrain, avoid littering, and always stay on the designated trails.

TRAIL ETIQUETTE Always practice good etiquette when riding. Allow a safe distance between your vehicle and other vehicles operating in the same area. Communicate to oncoming operators by signaling the number of vehicles in your group. When stopping, move your vehicle to the edge of the trail as far as possible to allow others to pass safely.

SAFE OPERATION PRACTICES 1. Visit the Recreational Off-Highway Vehicle Association web site and take

the free on-line training course. Complete the recommended safety training before operating this vehicle. Visit www.rohva.org or call 866-267-2751.

2. Do not allow anyone under 16 years of age or without a valid drivers license to operate this vehicle.

3. Engine exhaust fumes are poisonous and can cause loss of consciousness or death in a short time. Never start the engine or let it run in an enclosed area.

4. Never operate with accessories not approved by POLARIS for use on this vehicle.

86

OPERATION

5. Operate this vehicle off-road only. Never operate this vehicle on any public street, road or highway, including dirt and gravel roads (unless designated for off-highway use).

6. Use caution and drive at reduced speeds in conditions of reduced visibility such as fog, rain and darkness. Clean headlights frequently and replace burned out headlamps promptly.

7. Always operate at a speed that's appropriate for the terrain, the visibility and operating conditions and your skills and experience. Never operate at excessive speeds. Never attempt wheelies, jumps, or other stunts. Keep both hands on the steering wheel during operation.

8. Never consume alcohol or drugs before or while operating this vehicle.

9. Always use the size and type of tires specified for your vehicle. Always maintain proper tire pressure.

10.Never operate a damaged vehicle. After any rollover or accident, have a qualified service dealer inspect the entire machine for possible damage.

11. Never operate the vehicle on a frozen body of water unless you have first verified that the ice is sufficiently thick to support the weight and moving force of the vehicle, you and your cargo, together with any other vehicles in your party.

12.Do not touch hot exhaust system components. Always keep combustible materials away from the exhaust system.

13.Always remove the ignition key when the vehicle is not in use to prevent unauthorized use.

87

OPERATION

PRE-RIDE INSPECTION WARNING

Failure to inspect and verify that the vehicle is in safe operating condition before operating increases the risk of an accident. Always inspect the vehicle

before each use to make sure it's in safe operating condition.

ITEM REMARKS PAGE

Brake system/pedal travel Ensure proper operation page 141

Brake fluid Ensure proper level page 141

Front suspension Inspect, lubricate if necessary page 120

Rear suspension Inspect, lubricate if necessary page 120

Steering Ensure free operation -

Tires Inspect condition and pressure page 145

Wheels/fasteners Inspect, ensure fastener tightness page 145

Frame nuts, bolts, fasteners Inspect, ensure tightness -

Drive Belt Inspect, ensure installed correctly -

Fuel and oil Ensure proper levels page 121

Coolant level Ensure proper level page 129

Coolant hoses Inspect for leaks -

Throttle Ensure proper operation page 56

Indicator lights/switches Ensure proper operation page 52

Intake pre-filters Inspect, clean -

Headlamps Check operation, apply POLARIS dielectric grease when lamp is replaced

page 147

Brake light/tail lamps Check operation -

Seat Latch Push down on the seat back to ensure the latch is secure

-

Seat Belt Check length of belt for damage, check latches for proper operation

page 61

88

OPERATION

ITEM REMARKS PAGE

Cab Doors (if equipped) Check doors and latches for wear or damage. -

Grass and leaves Remove grass, leaves, foreign matter, and other flammable material or debris, especially near the exhaust system

-

89

OPERATION

STARTING THE ENGINE 1. Position the vehicle on a level surface outdoors or in a well ventilated area.

2. Sit in the driver's seat and fasten the seat belt. Secure the cab doors (if equipped).

3. Place the transmission in PARK.

4. Apply the brakes. Do not press the throttle pedal while starting the engine.

5. Turn the ignition key past the ON/RUN position to START. Engage the starter for a maximum of five seconds. Release the key when the engine starts.

6. If the engine does not start within five seconds, return the ignition switch to the OFF position and wait five seconds. Repeat steps 5 and 6 until the engine starts.

7. Vary the engine RPM slightly with the throttle to aid in warm up until the engine idles smoothly.

NOTICE Operating the vehicle immediately after starting could cause engine damage. Allow the engine to warm up for several minutes before operating the vehicle.

STOPPING THE ENGINE 1. Release the throttle pedal completely and brake to a complete stop.

2. Place the transmission in PARK.

3. Turn the key to the OFF position.

4. Slowly release the brake pedal and make sure the transmission is in PARK before exiting the vehicle.

WARNING A rolling vehicle can cause serious injury. Always place the transmission in

PARK before stopping the engine.

COLD WEATHER OPERATION If the vehicle is used year-round, check the oil level frequently. A rising oil level could indicate the accumulation of contaminates such as water or excess fuel in the bottom of the crankcase. Water in the bottom of the crankcase can lead to engine damage and must be drained. Water accumulation increases as outside temperature decreases.

90

OPERATION

BRAKING 1. Release the throttle pedal completely.

NOTICE When the throttle pedal is released completely and engine speed slows to near

idle, the vehicle has no engine braking.

2. Press on the brake pedal evenly and firmly. Practice starting and stopping (using the brakes) until you're familiar with the controls.

PARKING THE VEHICLE 1. Stop the vehicle on a level surface. When parking inside a garage or other

structure, be sure that the structure is well ventilated and that the vehicle is not close to any source of flame or sparks, including any appliance with pilot lights.

2. Place the transmission in PARK.

3. Turn the engine off.

4. Engage the parking brake (if equipped).

5. Slowly release the brake pedal and make sure the transmission is in PARK before exiting the vehicle.

6. Remove the ignition key to prevent unauthorized use.

91

OPERATION

HAULING CARGO WARNING

Overloading the vehicle or carrying or towing cargo improperly can alter vehicle handling and may cause loss of control or brake instability. Always

follow these precautions when hauling cargo: Never exceed the stated load capacity for this vehicle.

REDUCE SPEED AND ALLOW GREATER DISTANCES FOR BRAKING WHEN HAULING CARGO.

NEVER EXCEED THE MAXIMUMWEIGHT CAPACITYof the vehicle. When determining the weight you are adding to the vehicle, include the weight of the operator, passenger, accessories, loads in the rack or box and the load on the trailer tongue. The combined weight of these items must not exceed the

maximum weight capacity. Always load the cargo box with the load as far forward and as low as possible. When operating over rough or hilly terrain, reduce speed and cargo to maintain

stable driving conditions. Always operate the vehicle with extreme care when hauling or towing loads.

Slow down and drive in the lowest gear available. SECURE ALL LOADS BEFORE OPERATING. Unsecured loads can create unstable operating conditions, which could result in loss of control of the

vehicle. OPERATE ONLY WITH STABLE AND SAFELYARRANGED LOADS. When handling off-centered loads that cannot be centered, securely fasten the load

and operate with extra caution. Always attach the tow load to the hitch point designated for your vehicle.

HEAVY LOADS CAN CAUSE BRAKING AND CONTROL PROBLEMS. Use extreme caution when applying brakes with a loaded vehicle. Avoid terrain or

situations that may require backing downhill. USE EXTREME CAUTION when operating with loads that extend over the rack sides. Stability and maneuverability may be adversely affected, causing

vehicle rollover. DO NOT TRAVEL FASTER THAN THE RECOMMENDED SPEEDS. Vehicle should never exceed 10 MPH (16 km/h) while towing a load on a level grass surface. Vehicle speed should never exceed 5 MPH (8 km/h) when towing

loads in rough terrain, while cornering, or while ascending or descending a hill. Carrying a passenger in the cargo box could result in a fall from the vehicle or contact with moving components. Never allow a passenger to ride in the cargo

box.

92

OPERATION

WARNING

If the vehicle is capable, never exceed:

RANGER 1000 40 mph (64 kph) if total payload exceeds 550 lbs. (250 kg) or 25 mph (40 kph) if total payload exceeds 1050 lbs. (476 kg).

RANGER 1000 CA 40 mph (64 kph) if total payload exceeds 550 lbs. (250 kg) or 25 mph (40 kph) if total payload exceeds 1050 lbs. (476 kg).

RANGER CREW 1000 40 mph (64 kph) if total payload exceeds 970 lbs. (440 kg).

RANGER CREW 1000 CA 40 mph (64 kph) if total payload exceeds 970 lbs. (440 kg).

Your vehicle has been designed to carry or tow specific capacities. Reduce speed and allow a greater distance for braking when carrying cargo.

Loads should be centered on the vehicle and carried as low as possible in the box. For stability on rough or hilly terrain, reduce both speed and cargo. Exercise caution if the cargo load extends over the side of the box.

Always read and understand the load distribution warnings listed on warning labels and in this manual. Never exceed the maximum capacities specified for your vehicle.

BELT LIFE To extend belt life, use low gear when hauling or towing heavy cargo.

TOWING LOADS WARNING

Towing improperly can alter vehicle handling and may cause loss of control or brake instability.

Always follow these precautions when towing:

1. Never load more than 250 lbs. (113 kg) tongue weight on the towing bracket.

2. When towing a disabled vehicle, place the disabled vehicles transmission in neutral. Do not operate the vehicle faster than 10 MPH (16 km/h) when towing.

93

OPERATION

3. Towing a trailer increases braking distance. Do not operate the vehicle faster than 10 MPH (16 km/h) when towing.

4. Do not tow more than the recommended weight for the vehicle.

5. Attach a trailer to the trailer hitch bracket only. Do not attach a trailer to any other location, which could result in loss of control of the vehicle.

6. The total load (operator, accessories, cargo and weight on hitch) must not exceed the maximum weight capacity of the vehicle.

TOTALTOWED LOAD WEIGHT

(LEVEL GROUND)

TOTALTOWED LOAD WEIGHT (15 GRADE)

TOTAL HITCH VERTICAL WEIGHT

MAXIMUM TOWING SPEED

2500 lbs. (1134 kg)

850 lbs. (386 kg)

250 lbs (113 kg)

10 MPH (16 km/h)

94

OPERATION

DUMPING THE CARGO BOX To dump the cargo box, do the following:

1. Select a level site to dump the cargo box. Do not attempt to dump or unload the vehicle while parked on an incline.

2. Apply the brakes.

3. Shift the gear selector to the Park position.

4. Turn the key to the off position.

5. Dismount vehicle.

6. Ensure that the cargo is positioned evenly or toward the front of the cargo box.

7. Open the tailgate.

8. Stand clear and pull up on the cargo box release lever.

9. Lift the front of the cargo box to dump the cargo.

10.Lower the cargo box and push down securely to latch.

11. Close the tailgate.

WARNING Operating the vehicle while the cargo box is raised could result in severe injury. The box could close unexpectedly and cause injury to the driver or passenger. The rear tires will also catch the rear of a raised box, damaging the vehicle and creating hazardous driving conditions. Never operate this vehicle with the

cargo box in the raised position.

95

OPERATION

ALLWHEEL DRIVE/REAR DIFFERENTIAL SYSTEM If your model is equipped with a lockable differential, you can choose to operate with an open differential or a closed differential.

ENGAGING AWD NOTICE

Switching to AWD while the rear wheels are spinning may cause severe drive shaft and clutch damage. Always switch to AWD while the rear wheels have

traction or are at rest.

q All-Wheel Drive (AWD) w Differential Lock (2WD) e Differential Unlock (TURF Mode)

Press the top of the driveline mode switch to engage All Wheel Drive (AWD). The 4X4 indicator illuminates in the rider information center to indicate that the vehicle is in AWD. When the AWD switch is on, the front gearcase will automatically engage any time the rear wheels lose traction. When the rear wheels regain traction, the front gearcase will automatically disengage. There is no limit to the length of time the vehicle may remain in AWD. Initially, the vehicle's electronic system will not enable the AWD until the engine RPM is below 3100. Once enabled, the AWD remains enabled until the switch is turned off. If the switch is turned off while the front gearcase is moving, it will not disengage until the rear wheels regain traction.

Engage the AWD before getting into conditions where front wheel drive may be needed. If the rear wheels are spinning, release the throttle before switching to AWD.

96

OPERATION

DISENGAGING AWD Move the driveline mode switch to the center or bottom position to disengage AWD. If the switch is turned off while the front hubs are driving, they will not release until the rear wheels regain traction.

In some situations, the front gearcase may remain locked after turning the AWD switch off. If this occurs, you may notice increased steering effort and some vehicle speed restriction. Perform the following procedure to unlock the front gearcase.

To disengage AWD, do the following:

1. Stop the vehicle.

2. Operate in reverse for at least 3 m.

3. Stop completely.

4. Shift into low gear and drive forward.

5. If the front gearcase remains locked after following these instructions, see your dealer or other qualified service person for service.

LOCKING THE DIFFERENTIAL Move the switch to the center position to lock the differential and operate in two wheel drive (2WD). Locking the differential in slippery or low traction conditions helps improve traction. When the rear differential is locked, both rear wheels rotate at the same speed.

UNLOCKING THE DIFFERENTIAL (TURF MODE) When operating in TURF mode, the inside rear wheel will rotate independently from the outside wheel during turns. Operate in TURF mode only as needed to protect smooth, level surfaces from tire damage. DO NOToperate in TURF mode when climbing or descending hills, when sidehilling, or when operating on uneven, loose, or slippery terrain such as sand, gravel, ice, snow, obstacles, and water crossings. Always operate in AWD on these types of terrain.

WARNING Operating in TURF mode (if equipped) when on sloped, uneven, or loose terrain could cause loss of control and result in serious injury or death. One rear wheel may slip and lose traction or may lift up and grab when it touches

the ground again.

Press the bottom of the switch to unlock the differential and allow the rear drive wheels to operate independently (1WD). When the rear differential is unlocked, the rear wheels can rotate at different speeds. Unlock the differential to make maneuvering easier and minimize damage to turf.

97

OPERATION

NOTICE Damage to the differential can occur if it is engaged while the vehicle is

traveling at high speeds or while the rear wheels are spinning. Slow the vehicle to nearly stopped before engaging the differential.

WARNING Never operate in TURF mode (if equipped) while operating on a hill or other irregular terrain. Always move the switch to AWD before ascending or

descending a hill.

98

OPERATION

DRIVING PROCEDURES NEW OPERATOR DRIVING PROCEDURES 1. Read and understand the owner's manual and all warning and instruction

labels before operating this vehicle.

2. Visit the Recreational Off-Highway Vehicle Association web site and take the free on-line training course. Visit www.rohva.org or call 866-267-2751. Hands-on training is also available through ROHVA.

3. Perform the pre-ride inspection.

4. Do not tow or carry cargo during this period.

5. Select an open area that allows room to familiarize yourself with vehicle operation and handling.

6. The driver must wear helmet, eye protection, gloves, long-sleeve shirt, long pants, over-the-ankle boots and seat belt at all times.

7. Sit in the driver's seat and fasten the seat belt.

8. Always make sure all cab doors are closed and latched when riding in this vehicle.

9. Place the transmission in PARK.

10.Start the engine.

11. Apply the brakes and shift into low gear.

12.Check your surroundings and determine your path of travel.

13.Keeping both hands on the steering wheel, slowly release the brakes and depress the throttle with your right foot to begin driving.

14.Drive slowly at first. On level surfaces, practice starting, stopping, turning, maneuvering, using the throttle and brakes and driving in reverse. Learn how the vehicle handles when making both left and right turns at a slow speed.

WARNING Operating in TURF mode (if equipped) when on sloped, uneven, or loose terrain could cause loss of control and result in serious injury or death. One rear wheel may slip and lose traction or may lift up and grab when it touches

the ground again.

15. Increase speed only after mastering all maneuvers at a slow speed.

16.After you become skilled at making turns and begin to operate at faster speeds, follow these precautions:

99

OPERATION

Avoid sharp turns. Never turn while applying heavy throttle. Never make abrupt steering maneuvers. Operate at speeds appropriate for your skills, the conditions and the terrain.

DO NOT do power slides, donuts, jumps or other driving stunts.

DRIVING WITH PASSENGERS Perform the pre-ride inspection. Make sure all passengers are at least 12 years of age and tall enough to comfortably and safely sit in a passenger seat with the seat belt secured and both feet on the floor.

Make sure all passengers are wearing helmets, eye protection, gloves, long- sleeve shirt, long pants and over-the-ankle boots.

Make sure all cab nets or doors (if equipped) are properly secured. Do not carry more than the recommended number of passengers for your vehicle.

Allow a passenger to ride only in a passenger seat. Slow down. Always travel at a speed appropriate for your skills, your passengers skills, and operating conditions. Avoid unexpected or aggressive maneuvers that could cause discomfort or injury to a passenger.

Vehicle handling may change with a passenger and/or cargo on board. Allow more time and distance for braking.

Always follow all operating guidelines as outlined on safety labels and in this manual.

100

OPERATION

DRIVING ON SLIPPERY SURFACES WARNING

Skidding or sliding can cause loss of control or rollover (if tires regain traction unexpectedly). When operating on slippery surfaces such as ice or loose

gravel, reduce speed and use extra caution to reduce the chance of skidding or sliding out of control. Do not operate on excessively slippery surfaces.

When driving on slippery surfaces such as wet trails, loose gravel, or ice, be alert for the possibility of skidding and sliding. Follow these precautions when encountering slippery conditions:

Do not operate on excessively rough, slippery or loose terrain. Slow down before entering slippery areas. Maintain a high level of alertness, reading the trail and avoiding quick, sharp turns, which can cause skids.

Engage all-wheel drive before wheels begin to lose traction.

NOTICE Severe damage to the drive train may occur if the AWD is engaged while the wheels are spinning. Always allow the wheels to stop spinning before engaging

AWD.

Correct a skid by turning the steering wheel in the direction of the skid. Never apply the brakes during a skid.

DRIVING OVER OBSTACLES Follow these precautions when operating over obstacles:

Always check for obstacles before operating in a new area. Look ahead and learn to read the terrain. Be constantly alert for hazards such as logs, rocks and low hanging branches.

Travel slowly and use extra caution when operating on unfamiliar terrain. Not all obstacles are immediately visible.

Move the gear selector to Low Gear, if needed. Avoid operating over large obstacles such as large rocks and fallen trees. If unavoidable, use extreme caution and operate slowly.

Always have all passengers dismount and move away from the vehicle before operating over an obstacle that could cause a rollover.

101

OPERATION

DRIVING UPHILL Whenever traveling uphill, follow these precautions:

1. Avoid excessively steep hills.

2. Always travel straight uphill.

3. Keep both feet on the floor.

4. Always check the terrain carefully before ascending any hill. Never climb hills with excessively slippery or loose surfaces.

5. Proceed at a steady rate of speed and throttle opening. Never open the throttle suddenly.

6. Never go over the crest of a hill at high speed. An obstacle, a sharp drop, or another vehicle or person could be on the other side of the hill.

DRIVING DOWNHILL When driving downhill, follow these precautions:

1. Avoid excessively steep hills.

2. Always descend a hill with the direction selector switch on forward. Never descend a hill with the switch on neutral.

3. Drive straight downhill. Avoid descending a hill at an angle, which would cause the vehicle to lean sharply to one side. Travel straight downhill when possible.

4. Slow down.

5. Apply the brakes slightly to aid in slowing.

DRIVING ON A SIDEHILL (SIDEHILLING) Driving on a sidehill is not recommended. Improper procedure could cause loss of control or rollover. Avoid crossing the side of any hill unless absolutely necessary.

If crossing a sidehill is unavoidable, follow these precautions:

1. Slow down.

2. Exercise extreme caution.

3. Avoid crossing the side of a steep hill.

102

OPERATION

DRIVING THROUGHWATER Your vehicle can operate through water up to a maximum recommended depth equal to the floorboards.

NOTE If your vehicle becomes immersed or is operated in water that exceeds the floor level, service is required before starting the engine. Your dealer can

provide this service. If it's impossible to bring the vehicle in before starting the engine, perform the service outlined in the Spark Arrester section, and take the

vehicle in for service at the first opportunity.

Follow these procedures when operating through water:

1. Determine water depths and current before entering water.

2. Choose a crossing where both banks have gradual inclines.

3. Proceed slowly, avoiding rocks and obstacles.

4. Avoid operating through deep or fast-flowing water.

WARNING The large tires on your vehicle may cause the vehicle to float in deep or fast- flowing water, which could result in loss of control and lead to serious injury or

death. Never cross deep or fast-flowing water with your vehicle

5. After leaving water, always dry the brakes by applying light pressure to the pedal repeatedly until braking action is normal.

NOTE After running your vehicle in water, it's critical that you perform the services

outlined in the Periodic Maintenance Chart. Give special attention to engine oil, transmission oil, front and rear gearcases (if equipped), and all grease fittings.

DRIVING IN REVERSE Follow these precautions when operating in reverse:

Always check for obstacles or people behind the vehicle. Always inspect left and right fields of vision before backing.

Always avoid backing downhill. Back slowly. Apply the brakes lightly for stopping.

103

OPERATION

Avoid turning at sharp angles. Never open the throttle suddenly.

PARKING THE VEHICLE To park the vehicle, do the following:

1. Apply the brakes. Stop the vehicle on a level surface.

2. When parking inside a garage or other structure, be sure that the structure is well ventilated and that the vehicle is not close to any source of flame or sparks, including any appliance with pilot lights.

3. Place the transmission in PARK.

4. Turn the engine off.

5. Engage the park brake (if equipped).

6. Slowly release the brake pedal and make sure the transmission is in PARK before exiting the vehicle.

7. Remove the ignition switch key to prevent unauthorized use.

PARKING ON AN INCLINE Avoid parking on an incline if possible. If it's unavoidable, follow these precautions:

1. Apply the brakes.

2. Place the transmission in PARK.

3. Engage the parking brake (if equipped).

4. Turn the engine off.

5. Slowly release the brake pedal and make sure the transmission is in PARK before exiting the vehicle.

6. Block the rear wheels on the downhill side.

104

OPERATION

WINCH GUIDE WINCH SAFETY These safety warnings and instructions apply if your vehicle came equipped with a winch or if you choose to add an accessory winch to your vehicle.

WARNING Improper winch use can result in SEVERE INJURYor DEATH. Always follow

all winch instructions and warnings in this manual.

Your winch may have a cable made of either wire rope or specially designed synthetic rope. The term winch cable will be used for either unless noted otherwise.

WINCH SAFETY PRECAUTIONS 1. Read all sections of this manual.

2. Never use alcohol or drugs before or while operating the winch.

3. Never allow children under 16 years of age to operate the winch.

4. Always wear eye protection and heavy gloves when operating the winch.

5. Always keep body, hair, clothing and jewelry clear of the winch cable, fairlead and hook when operating winch.

6. Never attempt to jerk a load attached to the winch with a moving vehicle. See the Shock Loading section on page 113.

7. Always keep the area around the vehicle, winch, winch cable, and load clear of people (especially children) and distractions while operating the winch.

8. Always turn the vehicle ignition power OFF when it and the winch are not being used.

9. Always be sure that at least five (5) full turns of winch cable are wrapped around the winch drum at all times. The friction provided by this wrapped cable allows the drum to pull on the winch cable and move the load.

10.Always apply your vehicles park brake and/or park mechanism to hold the vehicle in place during winching. Use wheel chocks if needed.

11. Always align the vehicle and winch with the load directly in front of the vehicle as much as possible. Avoid winching with the winch cable at an angle to the winching vehicles centerline whenever possible.

105

WINCH GUIDE

12. If winching at an angle is unavoidable, follow these precautions:

a. Look at the winch drum occasionally. Never let the winch cable stack or accumulate at one end of the winch drum. Too much winch cable at one end of the winch drum can damage the winch and the winch cable.

b. If stacking occurs, stop winching. Follow step 15 of Winch Operation to feed and rewind the cable evenly before continuing the winch operation.

13.Never winch up or down at sharp angles. This can destabilize the winching vehicle and possibly cause it to move without warning.

14.Never attempt to winch loads that weigh more than the winchs rated capacity.

15.The winch motor may become hot during winch use. If you winch for more than 45 seconds, or if the winch stalls during operation, stop winching and permit the winch to cool down for 10 minutes before using it again.

16.Never touch, push, pull or straddle the winch cable while winching a load.

17.Never let the winch cable run through your hands, even if wearing heavy gloves.

18.Never release the clutch on the winch when the winch cable is under load.

19.Never use the winch for lifting or transporting people.

20.Never use the winch to hoist or suspend a vertical load.

21.Always inspect your winch and winch cable before each use.

22.Never winch the hook fully into the winch. This can cause damage to winch components.

23.Unplug the remote control from the vehicle when the winch is not in use to prevent inadvertent activation and use by unauthorized persons.

24.Never grease or oil the winch cable. This will cause the winch cable to collect debris that will shorten the life of the cable.

106

WINCH GUIDE

WINCH OPERATION Read the Winch Safety Precautions in the preceding pages before using your winch.

TIP

Consider practicing the operation and use of your winch before you actually need to use it in the field.

WARNING

Improper winch use can result in SEVERE INJURYor DEATH. Always follow all winch instructions and warnings in this manual.

Each winching situation is unique.

Take your time to think through the winching you are about to do. Proceed slowly and deliberately. Never hurry or rush during winching. Always pay attention to your surroundings. You may need to change your winching strategy if it is not working. Always remember that your winch is very powerful. There are simply some situations that you and your winch will not be able to deal with. Do not be afraid to ask others to help when this happens.

1. Always inspect the vehicle, winch, winch cable and winch controls for any signs of damage or parts in need of repair or replacement before each use. Pay particular attention to the first 3 feet (1 meter) of winch cable if the winch is being used (or has been used) for lifting an accessory plow assembly. Promptly replace any worn or damaged cable.

2. Never operate a winch or a vehicle in need of repair or service.

3. Always apply your vehicles park brake and/ or park mechanism to hold the vehicle in place during winching. Use wheel chocks if needed.

4. Always use the hook strap when handling the hook.

107

WINCH GUIDE

WARNING Never put your fingers into the hook. This could lead to SEVERE INJURY.

Attach the hook itself onto the load or use a tow strap or chain to secure the load to the winch cable.

TIP A tow strap is NOT intended to stretch. A recovery strap is designed to

stretch.

WARNING Never use a recovery strap when winching due to the excessive energy that can be released if the winch cable breaks. This can result in SEVERE INJURY

or DEATH. See the Shock Loading section on page 113.

Never hook the winch cable back onto itself. This will damage the winch cable and may result in winch cable failure.

WARNING Replace the winch cable at the first sign of damage to prevent SEVERE INJURYor DEATH in the event of failure. For your safety, always replace POLARIS winch parts (including the cable) with genuine POLARIS

replacement parts available at your authorized POLARIS dealer, or other qualified dealer.

108

WINCH GUIDE

If possible, keep the winch cable aligned with the centerline of the winching vehicle. This will help the spooling of the winch cable and reduce the load on the fairlead.

If freeing a stuck vehicle by attaching to a tree, use an item such as a tow strap to avoid damaging the tree during winch operation. Sharp cables and chains can damage and even kill trees. Please remember to TreadLightly (treadlightly.org).

Before operating the winch, be sure that the safety latch on the winch cable hook is fully seated when the load is attached.

Never operate your winch with a damaged hook or latch. Always replace damaged parts before using the winch.

5. Never remove the hook strap from the hook.

6. Release the winch clutch and pull out the winch cable.

7. Pulling out as much cable as possible maximizes the winchs pulling capacity. Always be sure that at least five (5) full turns of winch cable are wrapped around the winch drum at all times. The friction provided by this wrapped cable allows the drum to pull on the winch cable and move the load.

8. Read and adhere to the following information for winch damping to ensure safe winch use.

a. In order to absorb energy that could be released by a winch cable failure, always place a damper on the winch cable. A damper can be heavy jacket, tarp, or other soft, dense object. A damper can absorb much of the energy released if a winch cable breaks when winching. Even a tree limb can help as a damper if no other items are available to you.

b. Lay the damper on top of the mid-point of the winch cable length that is spooled out.

109

WINCH GUIDE

c. On a long pull, it may be necessary to stop winching so that the damper can be repositioned to the new mid-point of the winch cable. Always release the tension on the winch cable before repositioning the damper.

d. Avoid being directly in line with the winch cable whenever possible. Also, never permit others to stand near or in line with the winch cable during winch operation.

9. Never hook the winch cable back onto itself. This will damage the winch cable and may result in winch cable failure.

10.Never use straps, chains or other rigging items that are damaged or worn.

11. The ONLY time a winch-equipped vehicle should be moving when using the winch is when that vehicle itself is stuck. The winch equipped vehicle should NEVER be in motion to shock load the winch cable in an attempt to move a second stuck vehicle. See the Shock Loading section on page 113. For your safety, always follow these guidelines when winching a vehicle free:

a. Release the winch clutch and spool out the necessary length of winch cable.

b. Align the winch cable as close as possible to the winching vehicles centerline.

c. Attach the winch cable hook to the anchor point or the stuck vehicles frame following instructions in this manual.

d. Re-engage the clutch on the winch.

e. Slowly winch in the slack in the winch cable.

f. Select the proper vehicle gear to propel the stuck vehicle in the direction of winching.

g. Shift to the lowest gear available on the stuck vehicle.

h. Slowly and carefully apply vehicle throttle and winch together to free the vehicle.

i. Stop winching as soon as the stuck vehicle is able to propel itself without the help of the winch.

j. Detach the winch cable hook.

k. Rewind the winch cable evenly back onto the winch drum following the instructions in this manual.

12.Never attempt to winch another stuck vehicle by attaching the winch cable to a suspension component, brush guard, bumper or cargo rack. Vehicle damage may result. Instead, attach the winch to a strong portion of the vehicle frame or hitch.

110

WINCH GUIDE

13.Extensive winching will run down the battery on the winching vehicle. Let the winching vehicles engine run while operating the winch to prevent the battery from running low if winching for long periods.

14.The winch motor may become hot during winch use. If you winch for more than 45 seconds, or if the winch stalls during operation, stop winching and permit the winch to cool down for 10 minutes before using it again.

15.After winching is complete, especially if winching at an angle, it may be necessary to re-distribute the winch cable across the winch drum. You will need an assistant to perform this task.

a. Release the clutch on the winch.

b. Feed out the winch cable that is unevenly bunched up in one area.

c. Re-engage the winch clutch.

d. Have an assistant pull the winch cable tightly with about 100 lbs. (45 kg) of tension using the hook strap.

e. Slowly winch the cable in while your assistant moves the end of the winch cable back and forth horizontally to evenly distribute the winch cable on the drum.

f. Doing this reduces the chances of the winch cable wedging itself between lower layers of winch cable.

111

WINCH GUIDE

WINCH CABLE CARE WARNING

Use of worn or damaged cable could lead to sudden failure and SEVERE INJURY.

For your safety, always replace POLARIS winch parts (including the cable) with genuine POLARIS replacement parts available at your authorized POLARIS dealer, or other qualified person.

1. Always inspect your winch before each use. Inspect for worn or loose parts including mounting hardware. Never use the winch if any part needs repair or replacement.

2. Always inspect your winch cable before each use. Inspect for worn or kinked winch cable. A kinked winch cable made of wire rope is shown at right. Even after being straightened out, this cable has already been permanently and severely damaged. Promptly discontinue use of a winch cable in this condition.

A kinked winch cable made of wire rope that has been straightened out is shown at right. Even though it may look usable, the cable has been permanently and severely damaged. It can no longer transmit the load that it could prior to kinking. Promptly discontinue use of a winch cable in this condition.

A winch cable made of synthetic rope should be inspected for signs of fraying. Replace the cable if fraying is observed (shown below). Promptly discontinue use of a winch cable in this condition. Also replace the winch cable if there are fused or melted fibers. Such an area of the synthetic rope will be stiff and appear smooth or glazed. Promptly discontinue use of a winch cable in this condition.

112

WINCH GUIDE

SHOCK LOADING WARNING

Your winch cable is very strong but it is NOT designed for dynamic, or shock loading. Shock loading may tension a winch cable beyond its strength and cause the cable to break. The end of a broken winch cable under such high loading can cause SEVERE INJURYor DEATH to you and other bystanders.

Winch cables are designed to NOTabsorb energy. This is true of both wire-rope and synthetic-rope winch cables.

1. Never attempt to jerk a load with the winch. For example, never take up slack in the winch cable by moving the winching vehicle in an attempt to move an object. This is a dangerous practice. It generates high winch cable loads that may exceed the strength of the cable. Even a slowly moving vehicle can create large shock loads in a winch cable.

WARNING SEVERE INJURYor DEATH can result from a broken winch cable.

2. Never quickly turn the winch ON and OFF repeatedly (jogging). This puts extra load on the winch, winch cable, and generates excessive heat from the motor. This is a form of shock loading.

3. Never tow a vehicle or other object with your winch. Towing an object with a winch produces shock loading of the cable even when towing at slow speeds. Towing from a winch also positions the towing force high on the vehicle. This can cause instability of the vehicle and possibly lead to an accident.

4. Never use recovery straps with your winch. Recovery straps are designed to stretch and can store energy. This stored energy in the recovery strap is released if a winch cable fails making the event even more hazardous. Similarly, never use elastic bungie cords for winching.

5. Never use the winch to tie down a vehicle to a trailer or other transportation vehicle. This type of use also causes shock loading that can cause damage to the winch, winch cable, or vehicles used.

Your winch cable is designed and tested to withstand the loads produced by the winch motor when operated from a stationary vehicle. Always remember that the winch and winch cable are NOT designed for shock loading.

113

WINCH GUIDE

WINCH MAINTENANCE AND SERVICE SAFETY WARNING

Improper or lack of winch maintenance and service could lead to SEVERE INJURYor DEATH. Always follow all winch instructions and warnings in this

manual.

1. Always inspect your winch before each use. Inspect for worn or kinked winch cable. Also inspect for worn or loose parts including mounting hardware.

2. Permit your winch motor to cool down prior to servicing your winch.

3. Never work on your winch without first disconnecting the battery connections to prevent accidental activation of the winch.

4. For your safety, always replace POLARIS winch parts (including the cable) with genuine POLARIS replacement parts available at your authorized POLARIS dealer, or other qualified person.

5. Some winch models use wire rope as the winch cable. Other winches use a specially designed synthetic rope as the winch cable.

6. Never replace a synthetic-rope winch cable with a consumer-grade polymer rope such as can be purchased in a hardware store. Although they may look similar, they are NOTalike. A polymer rope not designed for winch use will stretch and store excessive energy when winching.

WARNING Failure of a stretched rope under winching conditions will release all of the

stored energy. This will increase the chances of SEVERE INJURYor DEATH.

REMOTE WINCH SWITCH (IF EQUIPPED) Pull the remote winch switch and cable out from the dash storage area. Press the power button to activate the winch. Press and hold the pad labelled OUT to spool line out from the winch. Press and hold the pad labelled IN to spool line in the winch.

114

WINCH GUIDE

EMISSION CONTROL SYSTEMS NOISE EMISSION CONTROL SYSTEM Do not modify the engine, intake or exhaust components, as doing so may affect compliance with U.S.A. EPA noise control requirements (40 CFR 205) and local noise level requirements.

OPERATION ON PUBLIC LANDS IN THE U.S.A. Your vehicle has a spark arrestor that was tested and qualified to be in accordance with the USFS standard 5100-1a. Federal law requires that this spark arrestor be installed and functional when the vehicle is operated on public lands.

Operation of off-road vehicles on public lands in the U.S.A. is regulated by 43 CFR 420. Violations are subject to monetary penalties. Federal regulations can be viewed online at https://ecfr.federalregister.gov/current/title-43/subtitle-B/ chapter-I/part-420.

CRANKCASE EMISSION CONTROL SYSTEM This engine is equipped with a closed crankcase system. Blow-by gases are forced back to the combustion chamber by the intake system. All exhaust gases exit through the exhaust system.

EXHAUST EMISSION CONTROL SYSTEM Exhaust emissions are controlled by engine design. An electronic fuel injection (EFI) system controls fuel delivery. The engine and EFI components are set at the factory for optimal performance and are not adjustable.

The emissions label is located on the inside of the lower left frame tube (below drivers foot area).

ELECTROMAGNETIC INTERFERENCE This spark ignition system complies with Canadian ICES-002.

This vehicle complies with the EMC requirements of UN ECE Regulation 10.

Non-ionizing Radiation: This vehicle emits some electromagnetic energy. People with active or non-active implantable medical devices (such as heart monitoring or controlling devices) should review the limitations of their device and the applicable electromagnetic standards and directives that apply to this vehicle.

115

EMISSION CONTROL SYSTEMS

116

MAINTENANCE POLARIS MAINTENANCE SCHEDULE The intervals shown in this table are based on vehicles operated under normal conditions.

Each interval is given in hours and miles (kilometers). Items should be serviced at whichever interval comes first.

Continue to reference the following maintenance schedules at the given intervals as hours and miles (kilometers) increase on the vehicle.

Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, and short trip cold weather operation.

INITIAL BREAK-IN SERVICE FIRST 25 HOURS / 250 MILES (400 KM)

Brake System Initial fluid level inspection; inspect for fluid leaks; add lubricant if needed. Inspect brake pad wear.

Engine Oil and Filter Change the engine oil and filter.

Front Gearcase Fluid Change fluid.

Transmission Fluid Initial fluid level inspection; inspect for fluid leaks; add lubricant if needed.

The break-in period consists of the first 25 hours of operation. Careful treatment of a new engine and drive components will result in more efficient performance and longer life for these components. The items outlined in this service interval only need to be performed at the first 25 hours of operation. They do not need to be performed every 25 hours.

Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, and short trip cold weather operation.

EVERY 50 HOURS / 500 MILES (800 KM)

Brake Pad Wear Inspect; replace as needed.

General Lubrication Locate all applicable fittings and grease.

Engine Breather Inspect; clean as needed

117

MAINTENANCE

Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, and short trip cold weather operation.

EVERY 100 HOURS / 1000 MILES (1600 KM) OR YEARLY

Air Filter Replace air filter. Ensure proper installation of filter and airbox cover. Inspect ducts and screens; clean as necessary.

Battery Check terminals; terminals should be tight and free of corrosion. Clean, test, and replace as necessary.

Clutches* Inspect bushings, rollers, wearable parts; clean; replace worn parts.

Cooling System Fluid level inspection; inspect for fluid leaks; add coolant if needed. Inspect coolant strength seasonally; pressure test system yearly.

Drive Belt Inspect; replace as needed.

Engine Oil and Filter Change the engine oil and filter.

Exhaust Silencer / Pipe Inspect for leaks or damage.

Front Gearcase Fluid Change fluid.

Front / Rear Suspension Lubricate (if applicable).

Fuel System* Cycle key to pressurize fuel pump; check for leaks at fuel system connections, check for leaks at fill cap.

Parking Brake (if applicable)* Inspect and adjust as needed.

Spark Arrestor Clean out.

Spark Plugs Inspect; replace as needed.

Suspension Components* Inspect tie rods, wheel bearings, suspension bushings, and ball joints for loose or worn components; replace as needed. Inspect shock absorbers for leaks or damage.

Transmission Fluid Change fluid.

118

MAINTENANCE

EVERY 100 HOURS / 1000 MILES (1600 KM) OR YEARLY

Wiring Inspect for wear, routing, and retention.

* It is recommended to have an authorized Polaris dealer perform these services.

Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, and short trip cold weather operation.

ADDITIONAL MAINTENANCE INTERVALS

Every 200 hours / 2000 miles (3200 km)

Shock Absorbers* Change shock oil or rebuild (if applicable). Inspect seals and replace as needed.

Brake Fluid Change fluid (DOT 4).

Every 500 hours / 5000 miles (8000 km) Valve Clearance* Inspect; adjust as

needed.

Every 600 hours / 6000 miles (9700 km) PVT

Perform PVTservice procedure, inspect drive belt.

Every 60 months / 5 years Coolant Change fluid.

* It is recommended to have an authorized Polaris dealer perform these services.

119

MAINTENANCE

LUBRICATION RECOMMENDATIONS Check and lubricate all components at the intervals outlined in the Periodic Maintenance Chart, or more often under severe use, such as wet or dusty conditions. Items not listed in the chart should be lubricated at the general lubrication interval.

ITEM LUBE METHOD

Engine Oil PS-4 5W-50 4-Cycle Oil Add to proper level on dipstick. See page 121.

Brake Fluid DOT 4 Brake Fluid Maintain level between fill lines. See page 141.

Transmission Oil (Main Gearcase)

AGL Gearcase Lubricant & Transmission Fluid

See page 125.

Demand Drive Fluid (Front Gearcase)

Demand Drive Fluid See page 126.

Prop Shaft U-Joint Grease Locate fittings and grease.

120

MAINTENANCE

ENGINE OIL Always check and change the oil at the intervals outlined in the Periodic Maintenance Chart. Always use the recommended engine oil. Always change the oil filter whenever changing oil.

Pay special attention to the oil level. A rise in oil level during cold weather can indicate contaminants collecting in the oil sump or crankcase. Change oil immediately if the oil level begins to rise. Monitor the oil level, and if it continues to rise, discontinue use and determine the cause. Your dealer can assist.

WARNING Vehicle operation with insufficient, deteriorated, or contaminated engine oil will cause accelerated wear and may result in engine seizure, accident and injury. Always perform the maintenance procedures as outlined in the Periodic

Maintenance Chart.

OIL RECOMMENDATIONS POLARIS recommends the use of POLARIS PS-4 5W-50 4-Cycle Oil or a similar oil. Refer to the Specifications section for capacities.

Oil may need to be changed more frequently if POLARIS PS-4 engine oil is not used. Follow the manufacturer's recommendations for ambient temperature operation. See the Polaris Products section for part numbers.

NOTICE

Mixing brands or using a non-recommended oil may cause serious engine damage. Always use the recommended oil. Never substitute or mix oil brands.

121

MAINTENANCE

OIL CHECK

The oil dipstick is located on the engine. Access the dipstick through the right rear wheel well.

To check the oil, do the following:

1. Position vehicle on a level surface and place the transmission in PARK.

2. Stop the engine and allow it to cool down before removing the dipstick.

3. Raise the cargo box. Unlock the dipstick leverq. Remove the dipstick and wipe it dry with a clean cloth.

4. Reinstall the dipstick and push it into place. Do not lock the dipstick.

NOTE Make certain the dipstick is inserted all the way into the dipstick tube to keep

the depth of the dipstick consistent.

5. Remove the dipstick and check the oil level.

6. Add the recommended oil as necessary to bring the oil level within the SAFE range on dipstick. Do not overfill (see NOTE below).

NOTE A rising oil level between checks during cold weather operation can indicate contaminants such as gas or moisture collecting in the crankcase. If the oil

level is over the upper mark, change the oil immediately.

7. With the cargo box raised, add engine oil through the oil fill capw located on top of the valve cover, under the cargo box.

8. When finished, reinstall dipstick and lock the lever. Lower the cargo box and secure in position.

122

MAINTENANCE

ENGINE OIL AND FILTER REPLACEMENT Always change engine oil and filter at the intervals outlined in the Periodic Maintenance Chart. Always change the oil filter whenever changing the engine oil.

The engine oil dipstick is located on the right front side of the engine. The engine oil fill cap is located on top of the valve cover. Access the oil dipstick and oil fill cap by tilting the rear cargo box.

The crankcase drain plug is located on the bottom of the crankcase. Access the drain plug through the skid plate access hole located directly under the crankcase.

1. Position vehicle on a level surface and place the transmission in PARK.

2. Stop the engine and allow it to cool down.

3. Clean the area around the crankcase drain plugq.

CAUTION Use caution when performing this procedure. Do not allow hot engine oil to

come into contact with skin, as serious burns may result.

4. Place a drain pan under the engine crankcase and remove the drain plug. Allow the oil to drain completely.

5. Remove all cargo from the cargo box.

CAUTION Always remove all cargo from the cargo box before lifting the box to access the

engine.

6. Pull up on the cargo box release lever to tilt the box.

7. Using the Oil Filter Wrench, turn the oil filterw counter-clockwise to remove it.

123

MAINTENANCE

8. Using a clean dry cloth, clean the filter sealing surface on the engine crankcase.

9. Lubricate the O-ring on the new oil filter with a film of fresh engine oil. Check to make sure the O-ring is in good condition. Install it to specification.

TORQUE

Oil Filter: Turn by hand until filter O-ring contacts sealing surface, then turn an additional 3/4 turn.

10.Replace the sealing washer on drain plug.

NOTE The sealing surface on the drain plug should be clean and free of burrs, nicks

or scratches.

11. Reinstall the engine crankcase drain plug. Torque drain plug to specification.

TORQUE

Crankcase Drain Plug: 12 ft-lbs (16 Nm)

12.Remove oil fill cap. Fill engine with recommended engine oil.

13.Verify the transmission is still in PARK.

14.Start the engine and allow it to idle for 30 seconds.

15.Stop the engine and inspect for oil leaks. Wait at least 15 seconds before removing the dipstick.

16.Unlock the dipstick lever. Remove the dipstick and wipe it dry with a clean cloth.

17.Reinstall the dipstick and push it into place. Do not lock the dipstick.

NOTE Make certain the dipstick is inserted all the way into the dipstick tube to keep

the depth of the dipstick consistent.

18.Remove the dipstick and check the oil level.

19.Add the recommended oil as necessary to bring the oil level within the SAFE range on dipstick. Do not overfill.

20.When finished, reinstall the oil fill cap, oil dipstick and lock the lever.

21.Dispose of used oil and filter properly.

124

MAINTENANCE

GEARCASES GEARCASE SPECIFICATION CHART

GEARCASE LUBRICANT CAPACITY FILL PLUG TORQUE

DRAIN PLUG/ LEVEL CHECK PLUG TORQUE

Transmission (Main Gearcase)

AGL Gearcase Lubricant & Transmission Fluid

41 fl oz (1200 mL)

1014 ft-lbs (1419 Nm)

1014 ft-lbs (1419 Nm)

Demand Drive Unit (Front Gearcase)

Demand Drive Fluid

9.3 fl oz (275 mL)

810 ft-lbs (1114 Nm)

11 ft-lbs (15 Nm)

TRANSMISSION (MAIN GEARCASE) TRANSMISSION OIL CHECK Always check and change the transmission oil at the intervals outlined in the Periodic Maintenance Chart. Maintain the oil level even with the bottom thread of the fill plug hole.

The fill plug is located on the rear of the gearcase. Maintain the fluid level at the bottom of the fill plug hole.

To check the transmission fluid, do the following:

1. Position the vehicle on a level surface.

2. Remove the fill plugq.

3. Check the fluid level.

4. Add the recommended fluid to the bottom of the fill plug hole. Do not overfill.

5. Reinstall the fill plug. Torque to specification.

125

MAINTENANCE

TRANSMISSION OIL CHANGE The drain plug is located on the bottom of the gearcase. Access the drain plug through the hole in the skid plate.

1. Remove the fill plugq.

2. Place a drain pan under the drain plugw.

3. Remove the drain plug. Allow the fluid to drain completely.

4. Clean and reinstall the drain plug. Torque to specification.

5. Add the recommended fluid to the bottom of the fill plug hole. Do not overfill.

6. Reinstall the fill plug. Torque to specification.

7. Check for leaks. Discard used fluid properly.

DEMAND DRIVE (FRONT GEARCASE) DEMAND DRIVE OIL CHECK Always check and change the demand drive fluid at the intervals outlined in the Periodic Maintenance Chart. Maintain the oil level even with the bottom thread of the fill plug hole. Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and torque specifications.

The front gearcase fill plugq is located on the right side of the front gearcase.

1. Position the vehicle on a level surface.

2. Remove the fill plugq. Check the oil level.

3. Add the recommended oil as needed.

4. Reinstall the fill plug. Torque to specification.

126

MAINTENANCE

DEMAND DRIVE OIL CHANGE 1. Support the vehicle securely with a jackstand.

2. Remove the front tire on the passenger's side for ease of access (optional).

3. Remove the fill plug.

4. Place a drain pan under the drain plugw on the bottom right-hand side.

5. Remove the drain plug. Drain the oil.

6. Clean and reinstall the drain plug. Torque to specification.

7. Add the recommended fluid to the bottom of the fill plug hole. Do not overfill.

8. Reinstall the fill plug. Torque to specification.

9. Check for leaks.

10.Discard used oil properly.

127

MAINTENANCE

SPARK PLUGS SPARK PLUG RECOMMENDATIONS Refer to the Specifications section for the recommended spark plug type for your vehicle. Always torque spark plugs to specification.

NOTICE

Using non-recommended spark plugs can result in serious engine damage. Always use POLARIS-recommended spark plugs or their equivalent.

SPARK PLUG GAP/TORQUE ELECTRODE GAP NEW OR USED PLUG TORQUE

0.03 in (0.85 mm) 9 ft-lbs (12 Nm)

SPARK PLUG INSPECTION Spark plug condition is indicative of engine operation. The spark plug firing end condition should be read after the engine is warmed up and the vehicle is driven at higher speeds. Immediately check the spark plug for correct color.

CAUTION A hot exhaust system and engine can cause burns. Wear protective gloves

when removing a spark plug for inspection.

To inspect the spark plugs, do the following:

1. Lift the cargo box to access the spark plugs.

2. Remove the spark plug cap. Using the spark plug wrench provided in the tool kit, remove the plug by rotating it counter-clockwise.

3. Reverse the procedure for spark plug installation.

4. Torque to specification.

NORMAL PLUG The normal insulator tip is gray, tan or light brown. There will be few combustion deposits. The electrodes are not burned or eroded. This indicates the proper type and heat range for the engine and the service.

The tip should not be white. A white insulator tip indicates overheating, caused by use of an improper spark plug or incorrect throttle body adjustments.

128

MAINTENANCE

WET FOULED PLUG The wet fouled insulator tip is black. A damp oil film covers the firing end. There may be a carbon layer over the entire nose. Generally, the electrodes are not worn. General causes of fouling are excessive oil, use of non-recommended oil or poor fuel quality.

COOLING SYSTEM The engine coolant level is controlled or maintained by the recovery system. The recovery system components are the overflow bottle, radiator filler neck, radiator pressure cap and connecting hose.

As coolant operating temperature increases, the expanding (heated) excess coolant is forced out of the radiator, past the pressure cap, and into the overflow bottle. As engine coolant temperature decreases, the contracting (cooled) coolant is drawn back up from the tank, past the pressure cap, and into the radiator.

Some coolant level drop on new vehicles is normal as the system is purging itself of trapped air. Observe coolant levels and maintain as recommended by adding coolant to the overflow bottle.

ADDING OR CHANGING COOLANT POLARIS recommends the use of POLARIS Antifreeze 50/50 Premix. This antifreeze is already premixed and ready to use. Do not dilute with water.

To ensure that the coolant maintains its ability to protect the engine, we recommend that the system be completely drained every five (5) years and fresh Antifreeze 50/50 Premix added.

Any time the cooling system has been drained for maintenance or repair, replace the coolant with fresh Antifreeze 50/50 Premix. If the recovery bottle has run dry, the level in the radiator should be inspected. Add coolant as needed.

RADIATOR AND COOLING FAN Always check and clean the screen and radiator fins at the intervals outlined in the Periodic Maintenance Chart. Do not obstruct or deflect air flow through the radiator by installing unauthorized accessories in front of the radiator or behind the cooling fan. Interference with the radiator air flow can lead to overheating and consequent engine damage.

NOTICE Washing the vehicle with a high-pressure hose could damage the radiator fins and impair the radiator's effectiveness. Using a high-pressure system is not

recommended.

129

MAINTENANCE

RADIATOR COOLANT LEVEL 1. Remove the hood panel

CAUTION Escaping steam can cause burns.

Never remove the pressure cap while the engine is warm or hot. Always allow the engine to cool before removing the pressure cap.

2. Slowly remove the radiator capq.

3. View the coolant level through the opening.

4. Use a funnel and slowly add coolant as needed.

TIP This procedure is required only if the cooling system has been drained for maintenance and/or repair. But, if the overflow bottle has run dry, the level in the radiator should be inspected.

5. Reinstall the pressure cap. Use of a non-standard pressure cap will not allow the recovery system to function properly. Your POLARIS dealer can provide the correct replacement part.

OVERFLOW BOTTLE COOLANT LEVEL Always check and change the coolant at the intervals outlined in the Periodic Maintenance Chart. Maintain the coolant level between the minimum and maximum marks on the bottle (when the fluid is cool).

130

MAINTENANCE

1. Position the vehicle on a level surface.

2. Lift the hood. View the coolant level in the overflow bottlew.

3. If the coolant level is below the safe operating range, lift the hood and locate the overflow bottle lid. Remove the cap and use a funnel to add coolant through the filler opening. Reinstall the cap.

TIP If coolant must be added often, or if the overflow bottle runs completely dry,

there may be a leak in the system. Your dealer can inspect the cooling system.

131

MAINTENANCE

132

MAINTENANCE

POLARIS VARIABLE TRANSMISSION (PVT) SYSTEM

WARNING

Failure to comply with the instructions in this warning can result in severe injury or death. Do not modify any component of the PVTsystem. Doing so may reduce its strength so that a failure may occur at a high speed. The PVT

system has been precision balanced. Any modification will cause the system to be out of balance, creating vibration and additional loads on components. The PVTsystem rotates at high speeds, creating large amounts of force on clutch components. As the owner, you have the following responsibilities for

your own safety and the safety of others:

Always follow all recommended maintenance procedures. Always look for and remove debris inside and around the clutch and vent system when replacing the belt.

See your dealer or other qualified service person as outlined in the owner's manual.

This PVTsystem is intended for use on POLARIS products only. Do not install it in any other product.

Always make sure the PVT housing is securely in place during operation.

133

MAINTENANCE

BELT REMOVAL If a belt fails, always clean any debris from the clutch air duct and from the clutch and engine compartments when replacing the belt.

WARNING Failure to remove ALL debris when replacing the belt could result in vehicle

damage, loss of control and severe injury or death.

NOTE

Inspect the entire clutch outlet duct (including the outlet duct screen) when replacing a drive belt. Remove any debris found in the outlet duct or outlet duct

screen.

To remove the belt, do the following:

1. Remove the nine fastenersq that retain the outer clutch cover.

NOTE Removal of left rear wheel or left rear shock is NOT necessary for belt

replacement.

2. To remove the clutch cover, pull the cover (starting at the bottom), lift up over the suspension, and then out of the vehicle.

NOTE Use care when lifting clutch cover upwards. Do not damage cover, intake boot,

or electrical harness.

134

MAINTENANCE

3. Mark the drive belt direction of rotation so that it can be installed in the same direction.

4. Insert clutch spreader tool into threaded hole on driven clutch as shown and turn clockwise to spread clutch.

NOTE Clutch spreader tool part number 2875911 is found in vehicle tool kit.

5. Walk the belt out of the driven clutch and drive clutch. Remove the belt from the vehicle.

BELT INSPECTION To inspect the drive belt, do the following:

1. Inspect belt for hour-glassing (extreme circular wear in at least one spot and on both sides of the belt). Hour glassing occurs when the drive train does not move and the drive clutch engages the belt.

2. Inspect belt for loose cords, missing cogs, cracks, abrasions, thin spots, or excessive wear. Compare belt measurements with a new drive belt. Replace if necessary.

3. Belts with thin spots, burn marks, etc., should be replaced to eliminate noise, vibration, or erratic PVToperation.

135

MAINTENANCE

BELT INSTALLATION NOTE

Be sure to install belt in the same direction as it was removed.

1. With the clutch spreader tool installed, loop the belt over the drive clutch and over the driven clutch.

2. Rotate the driven clutch and walk the belt into the clutch.

3. Turn the clutch spreader tool counterclockwise to remove from the driven clutch.

4. Rotate / spin the driven clutch and belt approximately 5-7 times to properly seat the belt in the driven clutch.

136

MAINTENANCE

5. Install the clutch cover into wheel well by installing the top half first, then the bottom half over the suspension.

NOTE Use care when installing the clutch cover. Do not damage cover, intake boot, or

electrical harness.

6. Install and torque the outer clutch cover boltsq to specification.

TORQUE

PVT Outer Cover Fasteners: 44 in-lbs (5 Nm)

VEHICLE IMMERSION WARNING

If your vehicle becomes immersed, major engine damage can result if the machine is not thoroughly inspected. Take the vehicle in for service before

starting the engine. Your POLARIS dealer can provide this service.

If it's impossible to take your RANGER to a dealer before starting it, follow the steps outlined below:

1. Move the vehicle to dry land or at the very least, to water below the footrests.

2. Dry any water present in the air box. Filter replacement is required if water is present.

3. Remove the spark plugs. Turn the engine over several times using the electric start.

137

MAINTENANCE

4. Dry the spark plugs and reinstall, or replace with new plugs.

5. Attempt to start the engine. If necessary, repeat the drying procedure.

6. Take the vehicle in for service as soon as possible, whether you succeed in starting it or not. Your POLARIS dealer can provide the required service.

7. If water has been ingested into the PVT follow the procedure for drying.

138

MAINTENANCE

FILTER SYSTEMS AIR FILTER REPLACEMENT Inspect the air filter at the intervals outlined in the Periodic Maintenance Chart. In extremely dusty conditions, air filter replacement will be required more often.

1. Tilt the rear cargo box to access the airbox.

2. Release the two airbox cover latchesq and lift the cover up and out to access the air filter element.

3. Remove the air filter elementw.

4. Inspect the airbox for oil or water deposits. Wipe away any deposits with a clean shop towel.

NOTE If the filter has been soaked with fuel or oil it must be replaced.

DO NOTattempt to clean the air filter.

5. Place the air filter into the airbox. Reposition the lower airbox cover and install the three retaining latches.

NOTE Make sure the hinge pins are properly seated when reassembling the airbox

139

MAINTENANCE

SPARK ARRESTER WARNING

Never operate the vehicle without the spark arrester. Remove any combustible materials from the area.

Failure to heed the following warnings while servicing the spark arrestor could result in serious injury or death.

Never run the engine in an enclosed area. Exhaust contains poisonous carbon monoxide gas that can cause loss of consciousness or death in a very short time.

Do NOT perform service on the spark arrester while the system is HOT. Exhaust system temperatures can reach extreme temperatures. Allow components to cool sufficiently before proceeding.

Do not stand behind or in front of the vehicle while purging the exhaust system.

Never go under the vehicle while it is inclined. Wear eye protection and gloves while servicing.

Use the following procedure to periodically purge accumulated carbon from the exhaust pipe.

1. Turn off engine and allow exhaust to cool sufficiently.

2. Remove the spark arrester from the tailpipe of the muffler.

3. Remove any debris from spark arrester and the tailpipe.

4. Inspect spark arrester for holes in mesh screen. Replace as needed.

5. Replace spark arrester and torque bolt to specification.

TORQUE Spark Arrester Bolt: 8 ft-lbs (11 Nm)

140

MAINTENANCE

BRAKES The front and rear brakes are hydraulic disc type brakes. Press down on the brake pedal to engage the brakes.

BRAKE FLUID Inspect the brake system routinely. Inspect the level of the brake fluid before each operation.

WARNING After opening a bottle of brake fluid, always discard any unused portion. Never store or use a partial bottle. Brake fluid is hygroscopic, meaning it rapidly

absorbs moisture from the air. The moisture causes the boiling temperature of the brake fluid to drop, which can lead to early brake fade and the possibility of

accident or severe injury.

Change the brake fluid every two years and any time the fluid becomes contaminated, the fluid level is below the minimum, or if the type and brand of the fluid in the reservoir are unknown.

1. Position the vehicle on a level surface and turn off the engine.

2. View the brake fluid level at the reservoir in the drivers side wheel well. The level should be between the upper (MAX) and lower (MIN) level lines.

3. If the fluid level is lower than the upper level line, remove the master cylinder cap and add brake fluid to the upper (MAX) line.

4. Apply the brake forcefully for a few seconds and check for fluid leakage around the fittings.

141

MAINTENANCE

BRAKE INSPECTION WARNING

Do not apply WD-40or any petroleum product to brake discs. These types of products are flammable and may also reduce the friction between the brake

pad and caliper.

1. Check the brake system for fluid leaks.

2. Check the brake pedal for excessive travel or a spongy feel.

3. Check the friction pads for wear, damage and looseness.

4. Check brake discs for signs of cracks, excessive corrosion, warping or other damage. Clean any grease using an approved brake cleaner or alcohol.

5. Inspect the brake disc spline and pad wear surfaceq for excessive wear. Change pads when worn to 0.030" (0.762 mm).

142

MAINTENANCE

FRONT SUSPENSION ADJUSTMENT The front suspension can be adjusted to provide a stiffer suspension, if necessary.

1. Remove the top shock mounting bolts from the inside mounting positionsq.

2. Reposition the shocks to the outside mounting holesw.

3. Reinstall the shock mounting bolts. Torque to 40 ft-lbs (54.2 Nm).

CAM ADJUSTMENT Adjust the front and rear shock absorber springs by rotating the adjustment cam either clockwise or counter-clockwise to increase or decrease spring tension.

Always heed the following rules if you make adjustments to this suspension.

Always return the suspension to the lowest (softest) setting after the load is removed from the vehicle. The increased suspension height will negatively impact vehicle stability when operating without a load.

Always apply the same adjustment setting to both rear wheels.

143

MAINTENANCE

REAR CAM ADJUSTMENTS The rear suspension cams can be adjusted to provide a stiffer suspension, if necessary.

Adjust the front and rear shock absorber springs by rotating the adjustment cam either clockwise or counter-clockwise to increase or decrease spring tension.

Always heed the following rules if you make adjustments to this suspension.

Always return the suspension to the lowest (softest) setting after the load is removed from the vehicle. The increased suspension height will negatively impact vehicle stability when operating without a load.

Always apply the same adjustment setting to both rear wheels.

STEERING WHEEL INSPECTION Check the steering wheel for specified freeplay and smooth operation at the intervals outlined in the Periodic Maintenance Chart section.

1. Position the vehicle on level ground.

2. Lightly turn the steering wheel left and right.

3. There should be 0.8-1.0 in (20-25 mm) of freeplay.

4. If there is excessive freeplay or strange noises, or the steering feels rough or catchy, have the steering system inspected by an authorized dealer.

144

MAINTENANCE

TIRES WARNING

Operating your vehicle with worn tires will increase the possibility of skidding, loss of control and an accident, which could result in serious injury or death. Always replace tires when the tread depth measures 1/8 in (3 mm) or less. Improper tire inflation or the use of non-standard size or type of tires may adversely affect vehicle handling, which could result in vehicle damage or personal injury. Always maintain proper tire pressure. Always use POLARIS

approved size and type of tires for this vehicle when replacing tires.

TIRE TREAD DEPTH Always replace tires when tread depth is worn to 3 mm (1/8) or less.

AXLE AND WHEEL NUT TORQUE SPECIFICATIONS Inspect the following items occasionally for tightness, and if they've been loosened for maintenance service. Do not lubricate the stud or the lug nut.

Lug Nut (Aluminum Wheels)

Front and Rear 120 ft-lbs (163 Nm)

Lug Nut (Steel Wheels) Front and Rear 60 ft-lbs (81 Nm)

Cone Washer and Iron Hub Front and Rear 180 ft. lbs. (245 Nm)

145

MAINTENANCE

WHEEL REMOVAL 1. Position the vehicle on a level surface.

2. Apply the brakes. Put the vehicle in PARK, and set the park brake (if equipped). Turn the key off.

3. Loosen the wheel nuts slightly.

4. Elevate the side of the vehicle by placing a suitable stand under the frame.

5. Remove the wheel nuts. Remove the wheel.

WHEEL INSTALLATION WARNING

Improperly installed wheels can adversely affect tire wear and vehicle handling, which can result in serious injury or death. Always ensure that all

nuts are torqued to specification. Do not service axle nuts that have a cotter pin installed. Your dealer can assist.

1. Place the transmission in PARK.

2. Place the wheel on the hub with the valve stem toward the outside and rotation arrows on the tire pointing toward forward rotation.

3. Attach the wheel nuts and finger-tighten.

4. Carefully lower the vehicle to the ground.

5. Torque the wheel nuts to specification.

146

MAINTENANCE

LIGHTS Poor lighting can result in reduced visibility when driving. Headlight and taillight lenses become dirty during normal operation. Clean lights frequently and replace burned out lamps promptly. Do not operate this vehicle at night or in low light conditions until the headlight is replaced. Always make sure lights are adjusted properly for best visibility.

When servicing a halogen lamp, don't touch the lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp.

HEADLIGHT BULB REPLACEMENT 1. Remove the hood from the front cab.

2. Locate the bulb on the back side of the headlight housing.

3. Disconnect the harness from the bulb. Be sure to pull on the connectorq, not on the wiring.

4. Turn the bulb counterclockwise and remove it from the headlight housing, as shown above.

5. Install the new bulb into the housing and rotate it clockwise 90 to lock it in place.

NOTE Make sure the tab on the bulb locates properly in the housing.

6. Install the harness onto the new headlight bulb and install the hood.

147

MAINTENANCE

HEADLIGHTADJUSTMENT The headlight beams are adjustable.

1. Place the vehicle on a level surface with the headlight approximately 25 ft. (7.6 m)w from a wall.

ITEM DESCRIPTION

q Measure Distance = 7.5 in (19.0 cm)

w Measure Distance = 25 ft (7.6 m)

e Headlight Center of Bulb

2. Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height.

3. With the machine in PARK, start the engine and turn the headlight switch to the LOW position.

4. The most intense part of the LOW beam headlight beam should be aimed 7.5 in (19.0 cm)q below the mark placed on the wall.

NOTE Rider weight must be included in the seat while performing this procedure.

148

MAINTENANCE

5. Adjust the beam to the desired position by loosening or tightening the bottom screwr and moving the lamp to the appropriate height.

6. Adjust the beam to desired position. Repeat the procedure to adjust the other headlight.

WARNING Due to the nature of light utility vehicles and where they are operated,

headlight lenses become dirty. Frequently washing is necessary to maintain lighting quality. Riding with poor lighting can result in severe injury or death.

BRAKE LIGHTS When the brake pedal is depressed, the brake light comes on. Check the brake light before each ride.

To check the brake lights, do the following:

1. Turn the key to the ON position.

2. Depress the brake pedal. The brake light should come on after about 0.4 in (10 mm) of pedal travel. If the light doesn't come on, check the bulb.

FUSES If the engine stops or will not start, or if you experience other electrical failures, a fuse may need replacement. Locate and correct any short circuits that may have caused the blown fuse, then replace the fuse. The fuse box is located under the hood. Spare fuses are provided in the fuse box.

If you suspect that a fuse or relay may not be working properly, your dealer can assist.

149

MAINTENANCE

FUSE SIZE FEATURE SUPPORTED

20A Chassis

15A Lights

10A Key Switch

10A Trickle Charge

10A ECM

15A Drive

30A EPS

20A Accessory

7.5A Winch

15A Plug and Power

7.5A Display

200A (Non-Servicable) B+

150

MAINTENANCE

151

MAINTENANCE

BATTERY WARNING

Battery electrolyte is poisonous. It contains sulfuric acid. Serious burns can result from contact with skin, eyes or clothing.

Antidote: External: Flush with water.

Internal: Drink large quantities of water or milk. Follow with milk of magnesia, beaten egg, or vegetable oil. Call physician immediately.

Eyes: Flush with water for 15 minutes and get prompt medical attention. Batteries produce explosive gases. Keep sparks, flame, cigarettes, etc. away. Ventilate when charging or using in an enclosed space. Always shield eyes when working near batteries. KEEP OUT OF REACH OF CHILDREN.

Your vehicle has a low-maintenance flooded battery. It does not require refilling.

Always keep battery terminals and connections free of corrosion. If cleaning is necessary, remove the corrosion with a stiff wire brush. Wash with a solution of one tablespoon baking soda and one cup water. Rinse well with tap water and dry off with clean shop towels. Coat the terminals with dielectric grease or petroleum jelly. Be careful not to allow cleaning solution or tap water into a conventional battery.

WARNING Improperly connecting or disconnecting battery cables can result in an explosion and cause serious injury or death. When removing the battery, always disconnect the negative (black) cable first. When reinstalling the

battery, always connect the negative (black) cable last.

152

MAINTENANCE

BATTERY MAINTENANCE AND CHARGING WARNING

An overheated battery may explode, causing severe injury or death. Always watch charging times carefully. Stop charging if the battery becomes very

warm to the touch. Allow it to cool before resuming charging.

The sealed battery is already filled with electrolyte and has been sealed and fully charged at the factory. Never pry the sealing strip off or add any other fluid to this battery.

The single most important thing about maintaining a sealed battery is to keep it fully charged. Check the battery voltage with a voltmeter or multimeter. A fully charged battery will register 12.8 V or higher. If the voltage falls below 12.5V, charge it immediately, or the battery runs the risk of sulfation and reduced battery life.

If you do not drive the vehicle for more than TWOWEEKS, Polaris recommends using a BatteryMINDer 2012 AGM - 2 AMP charger (PN 2830438), which can be ordered through your dealer.

Polaris provides a charging accessory with your vehicle that allows easy connection to the battery through the 12V auxiliary outlet, located on the dash. During charging, place the charger outside of the vehicle and protect it from moisture.

IMPORTANT The 12V socket located in the rear of 4 seat vehicles is powered after key-on

and CANNOT be used for charging.

If you plan to store the vehicle for THREE MONTHS or longer, remove the battery from the vehicle, then store the battery in a cool and dry location. Continue to maintain the battery with the BatteryMINDer 2012 AGM - 2 AMP charger.

When using an automatic charger other than a BatteryMINDer 2012-AGM - 2 AMP charger, refer to the charger manufacturer's instructions for recharging.

If using a constant current charger (instead of BatteryMINDer 2012 AGM - 2 AMP charger), use the guidelines below. Always verify battery condition before and 1-2 hours after the end of charging.

153

MAINTENANCE

STATE OF CHARGE VOLTAGE (DC) ACTION CHARGE TIME*

100% 12.8-13.0 volts None, check monthly

None required

75%-100% 12.6-12.8 volts May need slight charge, if no charge given, check in 2

weeks

3-6 hours

50%-75% 12.3-12.6 volts Needs charge 5-11 hours

25%-50% 12.0-12.3 volts Needs charge At least 13 hours

0%-25% 12.0 volts or less Needs charge At least 20 hours

* Using AGM specific charger at standard amps specified on top of battery

BATTERY INSTALLATION 1. Ensure that the battery is fully charged.

2. Place the battery in the battery holder.

3. Coat the terminals with dielectric grease or petroleum jelly.

4. Connect and tighten the red (positive) cable first.

5. Connect and tighten the black (negative) cable last.

6. Install the battery hold-down strap and tighten the screws.

7. Verify that cables are properly routed.

8. Reinstall the seat.

BATTERY REMOVAL WARNING

Improperly connecting or disconnecting battery cables can result in an explosion and cause serious injury or death. When removing the battery, always disconnect the negative (black) cable first. When reinstalling the

battery, always connect the negative (black) cable last.

To remove the battery, do the following:

1. Remove the storage bin under the passenger seat to access the battery.

2. Disconnect the black (-) battery cable first. Disconnect the red (+) battery cable last.

154

MAINTENANCE

3. Remove the battery hold-down strap.

4. Lift the battery out of the vehicle. Be careful not to tip a flooded battery sideways, which could spill electrolyte.

NOTICE If electrolyte spills, immediately wash it off with a solution of one tablespoon

baking soda and one cup water to prevent damage to the vehicle.

BATTERY STORAGE Whenever the vehicle is not used for a period of three months or more, remove the battery from the vehicle, ensure that it's fully charged, and store it out of the sun in a cool, dry place. Check battery voltage each month during storage and recharge as needed to maintain a full charge.

TIP Battery charge can be maintained by using a POLARIS Battery Tender charger or by charging about once a month to make up for normal self discharge. Battery Tender can be left connected during the storage period, and will

automatically charge the battery if the voltage drops below a predetermined point.

155

MAINTENANCE

CLEANING AND STORAGE WASHING THE VEHICLE Keeping your POLARIS vehicle clean will not only improve its appearance but it can also extend the life of various components.

NOTICE High water pressure may damage components. POLARIS recommends washing the vehicle by hand or with a garden hose, using mild soap.

NOTICE Certain products, including insect repellents and chemicals, will damage

plastic surfaces. Do not allow these types of products to contact the vehicle.

The best and safest way to clean your POLARIS vehicle is with a garden hose and a pail of mild soap and water.

1. Use a professional-type washing cloth, cleaning the upper body first and the lower parts last.

2. Rinse with clean water frequently.

3. Dry surfaces with a chamois to prevent water spots.

WASHING TIPS Avoid the use of harsh cleaners, which can scratch the finish. Do not use a power washer to clean the vehicle. Do not use medium to heavy duty compounds on the finish. Always use clean cloths and pads for cleaning and polishing. Old or reused cloths and pads may contain dirt particles that will scratch the finish.

Grease all zerk fittings immediately after washing. Allow the engine to run for a while to evaporate any water that may have entered the engine or exhaust system.

If a high pressure water system is used for cleaning (not recommended), exercise extreme caution. The water may damage components and could remove paint and labels. Avoid directing the water stream at the following items:

Wheel bearings Radiator Transmission seals Brakes Door seals (if equipped)

Cab and body panels Labels and decals Electrical components and wiring Air intake components Window seals (if equipped)

156

MAINTENANCE

If an informational or graphic label becomes illegible or comes off, contact your POLARIS dealer, or other qualified person, to purchase a replacement. Replacement safety labels are provided by POLARIS at no charge.

157

MAINTENANCE

STORAGE TIPS NOTICE

Starting the engine during the storage period will disturb the protective film created by fogging and damage could occur. Never start the engine during the

storage period.

CLEAN THE EXTERIOR Make any necessary repairs and clean the vehicle as recommended.

STABILIZE THE FUEL 1. Fill the fuel tank.

2. Add POLARIS Carbon Clean Fuel Treatment or POLARIS Fuel Stabilizer or equivalent fuel treatments or stabilizers. Follow the instructions on the container for the recommended amount. Carbon Clean removes water from fuel systems, stabilizes fuel and removes carbon deposits from pistons, rings, valves and exhaust systems.

3. Allow the engine to run for 15-20 minutes to allow the stabilizer to disperse through the entire fuel delivery system.

OIL AND FILTER Change the oil and filter. See the Engine Oil section.

AIR FILTER / AIR BOX Replace the air filter. See Maintenance Chapter. Clean the air box.

FLUID LEVELS Inspect the fluid levels. Add or change fluids as recommended in the Periodic Maintenance Chart.

Demand drive fluid (front gearcase) Rear gearcase fluid (if equipped) Transmission fluid Brake fluid (change every two years and any time the fluid looks dark or contaminated)

Coolant (test strength/fill)

INSPECTAND LUBRICATE Inspect all cables and lubricate all areas of the vehicle as recommended in the Periodic Maintenance Chart.

158

MAINTENANCE

FOG THE ENGINE 1. Treat the fuel system with POLARIS Carbon Clean or other equivalent fuel

treatment. Follow the instructions on the container. Start the engine. Allow it to idle for several minutes so the Carbon Clean reaches the injectors. Stop the engine.

2. Remove the spark plugs and add 11.5 oz. (29.544 cc.) of engine oil. To access the plug holes, use a section of clear 6 mm (1/4) hose and a small plastic squeeze bottle filled with the pre-measured amount of oil. Do this carefully! If you miss the plug holes, oil will drain from the spark plug cavities into the hole at the front of the cylinder head, and appear to be an oil leak.

3. Reinstall the spark plugs. Torque to specification.

4. Apply dielectric grease to the inside of each spark plug cap. Do not reinstall the cap onto the plug at this step.

5. Turn the engine over several times. Oil will be forced in and around the piston rings and ring lands, coating the cylinder with a protective film of fresh oil.

6. Reinstall the spark plug caps.

7. If POLARIS fuel system additive is not used, fuel tank, fuel lines, and injectors should be completely drained of gasoline.

STORAGE AREA / COVERS Be sure the storage area is well ventilated. Cover the vehicle with a genuine POLARIS cover. Do not use plastic or coated materials. They do not allow enough ventilation to prevent condensation, and may promote corrosion and oxidation.

159

MAINTENANCE

REMOVAL FROM STORAGE WARNING

Engine exhaust contains poisonous carbon monoxide and can cause loss of consciousness or death. Never run an engine in an enclosed area.

1. Check the battery electrolyte level and charge the battery if necessary. Install it in the vehicle. Make sure the battery vent hose is routed properly and that it's not pinched or restricted in any way.

2. Make sure spark plugs are tight.

3. Fill the fuel tank with fuel.

4. Check all the points listed in the Daily Pre-Ride Inspection. Tightness of the bolts, nuts and other fasteners should be checked by an authorized dealer or other qualified service facility.

5. Lubricate at the intervals outlined in the Periodic Maintenance Chart.

TRANSPORTING THE VEHICLE Follow these procedures when transporting the vehicle.

1. Apply the brakes.

2. Place the transmission in PARK. Stop the engine.

3. Slowly release the brake pedal and make sure the transmission is in PARK before exiting the vehicle.

4. Remove the key to prevent loss during transporting.

5. Secure the fuel cap and seat. Ensure that the seat is attached correctly and is not loose.

WARNING Cargo and other loose vehicle parts may fly off while transporting this vehicle.

Secure or remove all cargo, and inspect the unit for loose parts prior to transport.

If transporting the vehicle in a non-enclosed trailer, then the vehicle must FACE FORWARD, or roof must be removed.

Failure to comply may allow airflow, vibration, or other factors to separate the roof from the vehicle and cause an accident, resulting in serious personal

injury or death.

6. Using suitable straps or rope, always secure the vehicle to the trailer using the designated tie down points (front and rear).

160

MAINTENANCE

FRONT TIE-DOWN LOCATION q Front tie-down points, one or both

161

MAINTENANCE

REAR TIE-DOWN LOCATION w Rear tie-down points

162

MAINTENANCE

SPECIFICATIONS RANGER 1000 Maximum Weight Capacity (includes weight of operator, passenger, cargo, accessories)

Standard Models:-1500 lb (680 kg) CA Models: 1100 lb (499 kg) EPS Models: 1500 lb (680 kg)

Premium Models: 1500 lb (680 kg)

Dry Weight* Standard Models:-1437 lb (652 kg) EPS Models: 1485 lb (674 kg)

Premium Models: 1485 lb (674 kg)

*Dry weight is also listed on the Certificate of Origin for your vehicle in the Shipping Weight field. The dry weight is estimated based on the manufactured weight of the vehicle minus any serviceable fluids and may also exclude the weight of factory installed accessories not essential to the vehicles basic operation as outlined in the ANSI/ROHVA 1-2016 standard.

Test GVW - Rollover Protection System (ROPS)

3600 lbs. (1633 kg) per OSHA 29 CFR 1928.53

Fuel Capacity 11.35 gal (43 L)

Engine Oil Capacity 2.5 qts. (2.4 l)

Coolant Capacity 5 qts. (4.75 l) Winter Prep Models- 5.5 qts (5.5 l)

Overall Length 120 in. (305 cm)

Overall Width 62.5 in. (159 cm)

Overall Height 75 in. (191 cm)

Wheelbase 81 in (206 cm)

Cargo Box Dimensions (Inside)

36.5 x 54 x 11.5 in. (93 x 137 x 29 cm)

Ground Clearance 12 in (30.5 cm)

Min. Turning Radius 160 in. (406 cm)

Towing Capacity 2500 lbs. (1134 kg)

Hitch Tongue Capacity

250 lbs. (113 kg)

163

SPECIFICATIONS

Max. Cargo Box Load

1,000 lbs (454 kg) 600 lbs (272 kg) (Models sold in California)

Engine 4-Stroke SOHC Twin Cylinder

Displacement 999 cc

Bore x Stroke (mm) 93 mm x 73.5 mm

Vehicle Charging System Output

660 W@ 3000 RPM or 900 W@ 3000 RPM (if equipped)

Compression Ratio 10.5:1

Starting System Electric

Fuel System Electronic Fuel Injection

Ignition Timing ECU Controlled 32 +/- 2 @ 5000 RPM

Spark Plug/ Gap Autolite 5684 / 0.85 mm Nominal

Lubrication System Wet Sump

Cooling Liquid

Front Suspension Dual A-Arm, IFS 10.0 in (25.4 cm) Travel

Rear Suspension Dual A-Arm, IRS 10.0" (25.4 cm) Travel

Ignition System Digital CDI

Driving System Type

PVT

Shift Type Single Lever (H/L/N/R/P)

Gear Reduction - Low

Front 8.56:1/ Rear 25.59:1

Gear Reduction - Reverse

Front 7.67:1 / Rear 22.92:1

Gear Reduction - High

Front 4.03:1 / Rear 12.05:1

Drive Ratio - Front 3.82:1 (non-EPS) 3.25:1 (EPS)

Tire Size - Front Standard Models: 25 x 10-12 NHS; 489

164

SPECIFICATIONS

Premium/Winter Prep Models: 26 x 9-12; PXT 2.0

Tire Size - Rear Standard/ Standard - EPS Models: 25 x 11-12; 489 Premium/ Winter Prep Models: 26 x 11-12; PXT 2.0

Tire Pressure - Front

Standard/ Standard - EPS: 10 psi (69 kPa) Premium/Winter Prep Models: 12 psi (83 kPa)

Tire Pressure - Rear 14 psi (97 kPa)

Brakes, Front/Rear Foot Activated, 4 wheel hydraulic disc

Hood Headlights 2 single beam, 50W, quartz/halogen

Taillights 10 L.E.D. (.28W)

Brake Light 10 L.E.D. (3.1W)

CO2 Emissions 949 g/kWh This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.

165

SPECIFICATIONS

RANGER CREW 1000 Maximum Weight Capacity (includes weight of operator, passenger, cargo, accessories)

Standard Models: 1750 lb (794 kg) CA Models: 1350 lb (612 kg)

Premium Models: 1750 lb (794 kg)

Dry Weight* Standard Models: 1640 lb (744 kg) Premium Models: 1794 lb (814)

*Dry weight is also listed on the Certificate of Origin for your vehicle in the Shipping Weight field. The dry weight is estimated based on the manufactured weight of the vehicle minus any serviceable fluids and may also exclude the weight of factory installed accessories not essential to the vehicles basic operation as outlined in the ANSI/ROHVA 1-2016 standard.

Test GVW - Rollover Protection System (ROPS)

3750 lbs. (1701 kg) per OSHA 29 CFR 1928.53

Fuel Capacity 11.35 gal (43 L)

Engine Oil Capacity 2.5 qts. (2.4 l)

Coolant Capacity Standard/ Premium Models: 5.5 qts. (5.2 l) Winter Prep: 6 qts. (5.7 l)

Overall Length 152 in. (385 cm)

Overall Width 62.5 in. (159 cm)

Overall Height 75 in. (191 cm)

Wheelbase 113 in (287 cm)

Cargo Box Dimensions (Inside)

36.5 x 54 x 11.5 in. (93 x 137 x 29 cm)

Ground Clearance 12 in (30.5 cm)

Min. Turning Radius 200 in. (508 cm)

Towing Capacity 2500 lbs. (1134 kg)

Hitch Tongue Capacity

250 lbs. (113 kg)

Max. Cargo Box Load

1,000 lbs (454 kg) 600 lbs (272 kg) (CA Models)

166

SPECIFICATIONS

Engine 4-Stroke SOHC Twin Cylinder

Displacement 999 cc

Bore x Stroke (mm) 93 mm x 73.5 mm

Vehicle Charging System Output

660 W@ 3000 RPM 900 W@ 3000 RPM (Winter Prep Models)

Compression Ratio 10.5:1

Starting System Electric

Fuel System Electronic Fuel Injection

Ignition Timing ECU Controlled 32 +/- 2 @ 5000 RPM

Spark Plug/ Gap Autolite 5684 / 0.85 mm Nominal

Lubrication System Wet Sump

Cooling Liquid

Front Suspension Dual A-Arm, IFS 10.0 (25.4 cm) Travel

Rear Suspension Dual A-Arm, IRS 10.0" (25.4 cm) Travel

Ignition System Digital CDI

Driving System Type

Pro-PVTi

Shift Type Single Lever (H/L/N/R/P)

Gear Reduction - Low

Front 8.56:1/ Rear 25.59:1

Gear Reduction - Reverse

Front 7.67:1 / Rear 22.92:1

Gear Reduction - High

Front 4.03:1 / Rear 12.05:1

Drive Ratio - Front 3.82:1 (non-EPS) 3.25:1 (EPS)

Tire Size - Front Standrad Models: 25 x 10-12 NHS; 489 Premium/ Winter Prep Models: 26 x 9-12: PXT 2.0

Tire Size - Rear Standard Models: 25 x 11-12; 489

167

SPECIFICATIONS

Premium/ Winter Prep Models: 26 x 11-12; PXT 2.0

Tire Pressure - Front

16 psi (110 kPa)

Tire Pressure - Rear Standard Models: 20 psi (138 kPa) Premium/Winter Prep Models: 18 psi (124)

Brakes, Front/Rear Foot Activated, 4 wheel hydraulic disc

Hood Headlights 2 single beam, 50W, quartz/halogen

Taillights 10 L.E.D. (.28W)

Brake Light 10 L.E.D. (3.1W)

168

SPECIFICATIONS

POLARIS PRODUCTS LUBRICANTS / SERVICE PRODUCTS

PRODUCT SIZE (QUANTITY) QUANTITY PART NUMBER

Fogging Oil 12 fl oz (355 mL)

aerosol 12 2870791

1 qt (0.95 L) 12 2871517

PS-4

1 qt (0.95 L) 12 2876244

2 qt (1.90 L) 8 2877490

1 gal (3.8 L) 4 2876245

PS-4 Extreme Duty

1 qt (0.95 L) 12 2878920

2 qt (1.90 L) 8 2878922

1 gal (3.8 L) 4 2878919

AGL 1 qt (0.95 L) 12 2878068

1 gal (3.8 L) 4 2878069

Pump for Gallon Jug 1 2870465

Demand Drive 1 qt (0.95 L) 12 2877922

2.5 gal (9.5 L) 2 2877923

Antifreeze / Coolant 1 qt (0.95 L) 12 2880514

1 gal (3.8 L) 6 2880513

Grease Gun Kit, Premium All Season 1 2871312

All Season Grease

Four 3 fl oz (89 mL) packs 6 2871322

14 fl oz (414 mL) cartridge 1 2871423

Premium Starter Grease 1 2871460

U-Joint Grease

3 fl oz (89 mL) tube 24 2871515

14 fl oz (414 mL) cartridge 1 2871551

Dielectric Grease (Nyogel) 1 2871329

Carbon Clean 12 fl oz (355 mL) bottle 12 2871326

Fuel Stabilizer 16 fl oz (473 mL) 12 2870652

169

POLARIS PRODUCTS

PRODUCT SIZE (QUANTITY) QUANTITY PART NUMBER

2.5 gal (9.5 L) 2 2872280

DOT 4 Brake Fluid 1 2872189

Loctite 565 Thread Sealant 1 2871956

POLARIS Battery Tender Charger 1 2859044

170

POLARIS PRODUCTS

TROUBLESHOOTING DRIVE BELT WEAR/BURN

POSSIBLE CAUSE SOLUTION

Driving onto a pickup or tall trailer in high range Use low range during loading.

Starting out going up a steep incline Use low range.

Driving at low RPM or ground speed 37 mph (4.811.3 km/h)

Drive at a higher speed or use low range more frequently.

Insufficient warm-up at low ambient temperatures

Warm the engine at least 5 minutes. With the transmission in neutral, advance the throttle to about 1/8 throttle in short bursts, 5 to 7 times. The belt will become more flexible and prevent belt burning.

Slow/easy clutch engagement Use the throttle quickly and effectively.

Towing/pushing at low RPM/ low ground speed Use low range only.

Utility use/plowing Use low range only.

Stuck in mud or snow

Shift the transmission to low range and carefully use fast, aggressive throttle application to engage clutch.

WARNING: Excessive throttle may cause loss of control and vehicle rollover.

Climbing over large objects from a stopped position

Shift the transmission to low range and carefully use fast, brief, aggressive throttle application to engage clutch.

WARNING: Excessive throttle may cause loss of control and vehicle rollover.

Belt slippage from water or snow ingestion into the PVT system

Dry out the PVT. Prevent water from entering the PVT intake duct. See Intake Pre-Filters for more information. Inspect clutch seals for damage if repeated leaking occurs.

Clutch malfunction An authorized dealer can assist.

Poor engine performance Check for clogged air filter, clogged fuel filter, water in the fuel or foreign material in fuel tank or fuel lines. An authorized dealer can assist.

Slippage from failure to warm up belt

Always warm up the belt by operating below 30 mph (48 km/h) for 1 miles (1.6 km) (5 miles (8 km) or more when temperature is below freezing).

Wrong or missing belt Install the recommended belt.

Improper break-in Always break in a new belt and/or clutch.

171

TROUBLESHOOTING

172

TROUBLESHOOTING

ENGINE DOESN'T TURN OVER POSSIBLE CAUSE SOLUTION

Low battery voltage Recharge the battery

Loose battery connections Check all connections and tighten

Loose solenoid connections Check all connections and tighten

Loose electronic control box connections

Inspect, clean, reinstall connectors

ENGINE TURNS OVER, FAILS TO START POSSIBLE CAUSE SOLUTION

Out of fuel Refuel

Water is present in fuel Drain the fuel system and refuel

Old or non-recommended fuel Replace with fresh recommended fuel

Fouled or defective spark plug Inspect plug and replace if necessary

No spark to spark plug Inspect plug and replace if necessary

Water or fuel in crankcase Your authorized dealer can assist

Low battery voltage Recharge the battery to 12.8 VDC

Mechanical failure Your authorized dealer can assist

ENGINE BACKFIRES POSSIBLE CAUSE SOLUTION

Weak spark from spark plug Inspect, clean and/or replace spark plug

Incorrect spark plug gap or heat range

Set gap to specs or replace plug

Old or non-recommended fuel Replace with fresh recommended fuel

Incorrectly installed spark plug wires

Your authorized dealer can assist

Mechanical failure Your authorized dealer can assist

Loose ignition connections Check all connections and tighten

Water present in fuel Replace with fresh recommended fuel

173

TROUBLESHOOTING

ENGINE PINGS OR KNOCKS POSSIBLE CAUSE SOLUTION

Poor quality or low octane fuel Replace with recommended fuel

Incorrect spark plug gap or heat range

Set gap to specs or replace plug

ENGINE RUNS IRREGULARLY, STALLS OR MISFIRES

POSSIBLE CAUSE SOLUTION

Fouled or defective spark plug Inspect, clean and/or replace spark plug

Worn or defective spark plug wires

Your authorized dealer can assist

Incorrect spark plug gap or heat range

Set gap to specs or replace plug

Loose ignition connections Check all connections and tighten

Water present in fuel Replace with new fuel

Low battery voltage Recharge battery to 12.8 VDC

Incorrect fuel Replace with recommended fuel

Clogged air filter Inspect and clean or replace

Clogged intake pre-filter Inspect and clean (with soapy water) or replace

Other mechanical failure Your authorized dealer can assist

ENGINE STOPS OR LOSES POWER POSSIBLE CAUSE SOLUTION

Out of fuel Refuel

Kinked or plugged fuel vent line

Inspect and replace

Water is present in fuel Replace with new fuel

Fouled or defective spark plug Inspect, clean and/or replace spark plug

Worn or defective spark plug wires

Your authorized dealer can assist

Incorrect spark plug gap or heat range

Set gap to specs or replace plug

174

TROUBLESHOOTING

POSSIBLE CAUSE SOLUTION

Loose ignition connections Check all connections and tighten

Low battery voltage Recharge the battery to 12.8 VDC

Incorrect fuel Replace with fresh recommended fuel

Clogged air filter Inspect and clean or replace

Clogged intake pre-filter Inspect and clean (with soapy water) or replace

Other mechanical failure Your authorized dealer can assist

Overheated engine Clean radiator screen and core, clean engine exterior. Check the radiator fan harness for connection. Your dealer can assist.

Plugged Spark Arrester Clean out or replace

Low Coolant Check coolant level

175

TROUBLESHOOTING

176

WARRANTY LIMITED WARRANTY POLARIS Inc., 2100 Highway 55, Medina, MN 55340 (POLARIS) gives a ONE YEAR LIMITED WARRANTYon all components of your POLARIS vehicle against defects in material or workmanship. POLARIS further warrants that the spark arrester in this product will meet the efficiency requirements of USFS standard 5100-1C for at least 1000 hours when subjected to normal use and when maintenance and installation are in accordance with POLARIS recommendations.

This warranty covers parts and labor charges for repair or replacement of defective parts and begins on the date of purchase by the original retail purchaser. This warranty is transferable to another owner during the warranty period through a POLARIS dealer, but any such transfer will not extend the original term of the warranty. The duration of this warranty may vary by international region based upon local laws and regulations.

REGISTRATION At the time of sale, the Warranty Registration Form must be completed by your dealer and submitted to POLARIS within ten days of purchase. Upon receipt of this registration, POLARIS will record the registration for warranty. No verification of registration will be sent to the purchaser as the copy of the Warranty Registration Form will be your proof of warranty coverage. If you have not signed the original registration and received the customer copy, please contact your dealer immediately. NO WARRANTY COVERAGE WILL BE ALLOWED UNLESS YOUR VEHICLE IS REGISTERED WITH POLARIS. Initial dealer preparation and set-up of your vehicle is very important in ensuring trouble-free operation. Purchasing a machine in the crate or without proper dealer set-up will void your warranty coverage.

177

WARRANTY

WARRANTY COVERAGE AND EXCLUSIONS LIMITATIONS OF WARRANTIES AND REMEDIES This POLARIS limited warranty excludes any failures that are not caused by a defect in material or workmanship. THIS WARRANTY DOES NOT COVER CLAIMS OF DEFECTIVE DESIGN. This warranty also does not cover acts of God, accidental damage, normal wear and tear, abuse or improper handling. This warranty also does not cover any vehicle, component, or part that has been altered structurally, modified, neglected, improperly maintained or used for racing, competition or purposes other than for which it was designed.

This warranty excludes damages or failures resulting from improper lubrication; improper engine timing; improper fuel; surface imperfections caused by external stress, heat, cold or contamination; operator error or abuse; improper component alignment, tension, adjustment or altitude compensation; snow, water, dirt or other foreign substance ingestion/contamination; improper maintenance; modified components; use of aftermarket or unapproved components, accessories, or attachments; use of unapproved software or calibration; unauthorized repairs; or repairs made after the warranty period expires or by an unauthorized repair center.

This warranty excludes damages or failures caused by abuse, accident, fire, or any other cause other than a defect in materials or workmanship and provides no coverage for consumable components, general wear items, or any parts exposed to friction surfaces, stresses, environmental conditions and/or contamination for which they were not designed or not intended, including but not limited to the following items:

Wheels and tires Suspension components Brake components Seat components Clutches and components Steering components Batteries Light bulbs/Sealed beam lamps Filters Lubricants Bushings

Finished and unfinished surfaces Carburetor/Throttle body components

Engine components Drive belts Hydraulic components and fluids Circuit breakers/Fuses Electronic components Spark plugs Sealants Coolants Bearings

178

WARRANTY

LUBRICANTS AND FLUIDS 1. Mixing oil brands or using non-recommended oil may cause engine damage.

We recommend the use of POLARIS engine oil.

2. Damage or failure resulting from the use of non-recommended lubricants or fluids is not covered by this warranty.

This warranty provides no coverage for personal loss or expense, including mileage, transportation costs, hotels, meals, shipping or handling fees, product pick-up or delivery, replacement rentals, loss of product use, loss of profits, or loss of vacation or personal time.

THE EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY SHALL BE, AT POLARIS' OPTION, REPAIR OR REPLACEMENT OFANY DEFECTIVE MATERIALS, COMPONENTS, OR PRODUCTS. THE REMEDIES SET FORTH IN THIS WARRANTYARE THE ONLY REMEDIES AVAILABLE TO ANY PERSON FOR BREACH OF THIS WARRANTY. POLARIS SHALL HAVE NO LIABILITY TO ANY PERSON FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OFANY DESCRIPTION, WHETHER ARISING OUT OF EXPRESS OR IMPLIED WARRANTY OR ANY OTHER CONTRACT, NEGLIGENCE, OR OTHER TORT OR OTHERWISE. THIS EXCLUSION OF CONSEQUENTIAL, INCIDENTAL, AND SPECIAL DAMAGES IS INDEPENDENT FROM AND SHALL SURVIVE ANY FINDING THAT THE EXCLUSIVE REMEDY FAILED OF ITS ESSENTIAL PURPOSE.

THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS EXCLUDED FROM THIS LIMITED WARRANTY. ALL OTHER IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY) ARE LIMITED IN DURATION TO THE ABOVE ONE YEARWARRANTY PERIOD. POLARIS DISCLAIMS ALL EXPRESS WARRANTIES NOT STATED IN THIS WARRANTY. SOME STATES DO NOT PERMIT THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR ALLOW LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THE ABOVE LIMITATIONS MAY NOTAPPLY TO YOU IF INCONSISTENT WITH CONTROLLING STATE LAW.

179

WARRANTY

HOW TO OBTAIN WARRANTY SERVICE If your vehicle requires warranty service, you must take it to a POLARIS Servicing Dealer. When requesting warranty service you must present your copy of the Warranty Registration Form to the dealer. (THE COST OF TRANSPORTATION TO AND FROM THE DEALER IS YOUR RESPONSIBILITY.) POLARIS suggests that you use your original selling dealer; however, you may use any POLARIS Servicing Dealer to perform warranty service.

IN THE COUNTRY WHERE YOUR PRODUCT WAS PURCHASED: Warranty or Service Bulletin repairs must be done by an authorized POLARIS dealer, or other qualified person. If you move or are traveling within the country where your product was purchased, Warranty and Service Bulletin repairs may be requested from any authorized POLARIS dealer, or other qualified person, that sells the same line as your product.

OUTSIDE THE COUNTRY WHERE YOUR PRODUCT WAS PURCHASED: If you are traveling temporarily outside the country where your product was purchased, you should take your product to an authorized POLARIS dealer, or other qualified person. You must show the dealer photo identification from the country of the selling dealer's authorized location as proof of residence. Upon residence verification, the servicing dealer will be authorized to perform the warranty repair.

IF YOU MOVE: If you move to another country, be sure to contact POLARIS Customer Assistance and the customs department of the destination country before you move. Product importation rules vary considerably from country to country. You may be required to present documentation of your move to POLARIS in order to continue your warranty coverage. You may also be required to obtain documentation from POLARIS in order to register your product in your new country. You should warranty register your product at a local POLARIS dealer in your new country immediately after you move to continue your warranty coverage and to ensure that you receive information and notices regarding your product.

IF YOU PURCHASE FROM A PRIVATE PARTY: If you purchase a POLARIS product from a private party, to be kept and used outside of the country in which the product was originally purchased, all warranty coverage will be denied. You must nonetheless register your product under your name and address with a local POLARIS dealer in your country to ensure that you receive safety information and notices regarding your product.

180

WARRANTY

EXPORTED PRODUCTS EXCEPT WHERE SPECIFICALLY REQUIRED BY LAW, THERE IS NO WARRANTY OR SERVICE BULLETIN COVERAGE ON THIS PRODUCT IF IT IS SOLD OUTSIDE THE COUNTRY OF THE SELLING DEALER'S AUTHORIZED LOCATION. This policy does not apply to products that have received authorization for export from POLARIS. Dealers may not give authorization for export. You should consult an authorized dealer to determine this product's warranty or service coverage if you have any questions. This policy does not apply to products registered to government officials or military personnel on assignment outside the country of the selling dealer's authorized location. This policy does not apply to Safety Bulletins.

NOTICE If your product is registered outside of the country where it was purchased and you have not followed the procedure set above, your product will no longer be eligible for warranty or service bulletin coverage of any kind, other than safety recalls. Products registered to government officials or military personnel on assignment outside of the country where the product was purchased will continue to be covered by the Limited Warranty.

Please work with your dealer to resolve any warranty issues. Dealership contacts can be found via this website, if needed:

www.polaris.com/en-us/contact Should your dealer require any additional assistance, they will contact the appropriate person at POLARIS.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or in different countries. If any of the above terms are void because of federal, state, local law, all other warranty terms will remain in effect.

For questions call POLARIS Owner Connections:

United States & Canada: 1-800-POLARIS (1-800-765-2747)

French: 1-800-268-6334

To report a safety defect to Transport Canada, you may either fill out an online defect complaint form at their website: English: http://www.tc.gc.ca/recalls French: http://www.tc.gc.ca/rappels

Or contact their Defect Investigations and Recalls Division by calling toll-free 1- 800-333-0510 (Canada) or 819-994-3328 (Ottawa-Gatineau area / International).

181

WARRANTY

U.S.A. EPA EMISSIONS LIMITED WARRANTY This emissions limited warranty is in addition to the POLARIS standard limited warranty for your vehicle. Polaris Industries Inc. warrants that at the time it is first purchased, this emissions-certified vehicle is designed, built and equipped so it conforms with applicable U.S. Environmental Protection Agency emission regulations. POLARIS warrants that the vehicle is free from defects in materials and workmanship that would cause it to fail to meet these regulations.

The warranty period for off road vehicles 100 cm3 or greater emissions-certified vehicles starts on the date of purchase by original retail purchaser and continues for a period of 500 hours of engine operation, 3100 miles (5000 km) of vehicle travel, or 30 calendar months from the date of purchase, whichever comes first. The warranty period for ATVs less than 100 cm3 emissions-certified vehicles starts on the date of purchase by original retail purchaser and continues for a period of 250 hours of engine operation, 1550 miles (2500 km) of vehicle travel, or 30 calendar months from the date of purchase, whichever comes first. This EPA emissions warranty period is extended for at least as long as the standard factory warranty that Polaris provides on the vehicle as a whole. The EPA emissions warranty period does not further extend if you purchase additional warranty coverage in the form of a service contract or other paid warranty extension, but emission-related parts may be covered subject to the terms of any such paid service contract or paid warranty extension.

This emissions limited warranty covers components whose failure increases the vehicle's regulated emissions, and it covers components of systems whose only purpose is to control emissions. Repairing or replacing other components not covered by this warranty is the responsibility of the vehicle owner. This emissions limited warranty does not cover components whose failure does not increase the vehicle's regulated emissions.

For exhaust emissions, emission-related components include any engine parts related to the following systems:

Air-induction system Fuel system

Ignition system Exhaust gas recirculation systems

The following parts are also considered emission-related components for exhaust emissions:

Aftertreatment devices Crankcase ventilation valves

Sensors Electronic control units

182

WARRANTY

The following parts are considered emission-related components for evaporative emissions:

Fuel Tank Fuel Cap Fuel Line Fuel Line Fittings Clamps* Pressure Relief Valves* Control Valves* Control Solenoids* Electronic Controls*

Vacuum Control Diaphragms* Control Cables* Control Linkages* Purge Valves Vapor Hoses Liquid/Vapor Separator Carbon Canister Canister Mounting Brackets Carburetor Purge Port Connector

*As related to the evaporative emission control system.

Emission-related components also include any other part whose only purpose is to reduce emissions or whose failure will increase emissions without significantly degrading engine/equipment performance. The exclusive remedy for breach of this limited warranty shall be, at the exclusive option of POLARIS, repair or replacement of any defective materials, components or products. THE REMEDIES SET FORTH IN THIS LIMITED WARRANTYARE THE ONLY REMEDIES AVAILABLE TO ANY PERSON FOR BREACH OF THIS WARRANTY. POLARIS SHALL HAVE NO LIABILITY TO ANY PERSON FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OFANY DESCRIPTION, WHETHER ARISING OUT OF EXPRESS OR IMPLIED WARRANTY OR ANY OTHER CONTRACT, NEGLIGENCE OR OTHER TORT OR OTHERWISE. THIS EXCLUSION OF CONSEQUENTIAL, INCIDENTAL, AND SPECIAL DAMAGES IS INDEPENDENT FROM AND SHALL SURVIVE ANY FINDING THAT THE EXCLUSIVE REMEDY FAILED OF ITS ESSENTIAL PURPOSE.

ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO THE WARRANTY PERIOD DESCRIBED HEREIN. POLARIS DISCLAIMS ALL EXPRESS WARRANTIES NOT STATED IN THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply if it is inconsistent with the controlling state law.

This limited warranty excludes failures not caused by a defect in material or workmanship. This limited warranty does not cover damage due to accidents, abuse or improper handling, maintenance or use. This limited warranty also does not cover any engine that has been structurally altered, or when the vehicle has been used in racing competition. This limited warranty also does not cover physical damage, corrosion or defects caused by fire, explosions or other similar causes beyond the control of POLARIS.

183

WARRANTY

Owners are responsible for performing the scheduled maintenance identified in the owner's manual. POLARIS may deny warranty claims for failures that have been caused by the owner's or operator's improper maintenance or use, by accidents for which POLARIS has no responsibility, or by acts of God.

Any qualified repair shop or person may maintain, replace, or repair the emission control devices or systems on your vehicle. An authorized POLARIS dealer, or other qualified person, can perform any service that may be necessary for your vehicle. POLARIS also recommends POLARIS parts, however equivalent parts may be used for such service. It is a potential violation of the Clean Air Act if a part supplied by an aftermarket parts manufacturer reduces the effectiveness of the vehicle's emission controls. Tampering with emission controls is prohibited by federal law.

CALIFORNIA RESIDENTS Certain POLARIS Off-Road Vehicles are available in 49-state and 50-state versions. Only the 50-state models are certified for sale in California. The 50- state models available for sale in California are identified by the letter B in the ninth position of the model number (e.g., R16RTE87B). The POLARIS 50-state models are designed and built with features such as a reduced cargo box capacity. Any modifications to these features may be a violation of the applicable California regulations and may void this limited emissions warranty offered by the manufacturer.

The California evaporative emissions control system limited warranty statement below applies to your Off Highway Recreational Vehicle in California if the vehicle is equipped with an evaporative emission control system and is labeled with a Vehicle Evaporative Emissions Control Information label indicating that the vehicle conforms to California evaporative emissions regulations applicable to new off-road sport vehicles, all-terrain vehicles, or off-road utility vehicles. These vehicles are referred to as OHRV-EVAP below.

CALIFORNIA EMISSION CONTROLWARRANTY STATEMENT YOURWARRANTY RIGHTS AND OBLIGATIONS

The California Air Resources Board and Polaris Industries Inc. are pleased to explain the emission control system warranty on your model year 2018 and newer Off Highway Recreational Vehicle. In California, new off-highway recreational vehicles must be designed, built and equipped to meet the State's stringent anti-smog standards. Polaris must warrant the emission control system on your OHRV-EVAP for the periods of time listed below provided there has been no abuse, neglect or improper maintenance of your OHRV-EVAP.

184

WARRANTY

Your emission control system may include parts such as the carburetor or fuel injection system, fuel tank, fuel hoses, carbon canister, engine computer and Evaporative Emissions Control System parts listed in the U.S.A. EPA Emissions Limited Warranty. Also included may be hoses, belts, connectors and other emission-related assemblies. Where a warrantable condition exists, Polaris will repair your OHRV-EVAP at no cost to you including diagnosis, parts and labor.

MANUFACTURERS WARRANTY COVERAGE: For model year 2018 and newer OHRV-EVAP models.

For 30 months, or 2500 miles (4023 km), or 250 hours, whichever comes first, except for evaporative components over the OHRV high-priced warranty value, which is covered for 60 months, or 5000 miles (8047 km), or 500 hours, whichever comes first.

If any emission-related part on your OHRV-EVAP is defective, the part will be repaired or replaced by Polaris.

OWNER'S WARRANTY RESPONSIBILITIES: As the OHRV-EVAP owner, you are responsible for the performance of the required maintenance listed in your owner's manual. Polaris recommends that you retain all receipts covering maintenance on your OHRV-EVAP, but Polaris cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of a scheduled maintenance. As an owner you are responsible for presenting your OHRV-EVAP to a Polaris dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. As an OHRV-EVAP owner, you should also be aware that Polaris may deny you warranty coverage if your OHRV-EVAP or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

ADD-ON OR MODIFIED PARTS An add-on or modified part must be compliant with applicable CARB emission control standards. A violation of this requirement is punishable by civil and/or criminal punishment.

If you have any questions regarding your warranty rights and responsibilities, you should contact Polaris Customer Assistance at 1-800-POLARIS (1-800-765- 2747) or the California Air Resources Board at 9528 Telstar Avenue, El Monte, CA 91731.

United States & Canada: 1-800-POLARIS (1-800-765-2747)

French: 1-800-268-6334

185

WARRANTY

186

MAINTENANCE LOG MAINTENANCE LOG Use the following chart to record periodic maintenance.

DATE MILES (KM) OR HOURS

TECHNICIAN SERVICE PERFORMED / COMMENTS

187

MAINTENANCE LOG

188

A Adding or Changing Coolant ...... 129 Age Restrictions ........................ 39 Air Filter / Air Box..................... 158 Air Intake Maintenance Air Filter Replacement ........... 139

All Wheel Drive/Rear Differential System ................... 96 Auxiliary Outlet.......................... 55 AWD....................................... 54 Axle and Wheel Nut Torque Specifications........................ 145

B Battery .................................. 152 Battery Installation ................... 154 Battery Maintenance and Charging .............................. 153 Battery Removal...................... 154 Battery Storage ....................... 155 Battery Trickle-Charging Outlet..... 55 Belt Inspection ........................ 135 Belt Installation ....................... 136 Belt Life ................................... 93 Belt Removal .......................... 134 Boots ...................................... 14 Brake Lights ........................... 149 Brake Pedal ............................. 56 Brake System Break-in ............... 86 Brakes .................................. 141 Braking ................................... 91 Break-in Period ......................... 85

C Cab Nets ............................ 40, 63 California Residents ................. 184 Clean the Exterior .................... 158 Clothing................................... 14 Cold Weather Operation.............. 90 Component Locations................. 47 CREW ................................. 48

Console...............................49-50 Cooling System....................... 129

Crankcase Emission Control System .................................115

D Declaration of Conformity ............ 11 Demand Change Oil Change ..... 127 Demand Drive Oil Check ........... 126 Descending Hills Improperly ........ 44 Diagnostic Display Code Definitions .............................. 73 Drive Belt Wear/Burn................ 171 Driveline Mode Switch ................ 54 Driving Downhill ...................... 102 Driving in Reverse ................... 103 Driving on a Sidehill ................. 102 Driving Through Water.............. 103 Driving Uphill .......................... 102 Driving with Passengers............ 100 Dumping the Cargo Box .............. 95

E Electromagnetic Interference ......115 Electronic Power Steering ........... 63 Emissions Limited Warranty....... 182 Engine and Drivetrain Break-in ..... 85 Engine Backfires ..................... 173 Engine Doesn't Turn Over ......... 173 Engine Oil .............................. 121 Engine Oil and Filter Replacement ........................ 123 Engine Pings or Knocks ............ 174 Engine Runs Irregularly, Stalls or Misfires ............................ 174 Engine Stopping........................ 90 Engine Stops or Loses Power .... 174 Engine Turns Over, Fails to Start .................................... 173 Equipment Modifications ............. 37 European Vibration and Noise ...... 10 Exhaust Emission Control System .................................115 Exported Products ................... 181 Exposure to Exhaust .................. 43 Eye Protection .......................... 14

189

F Failure to Inspect Before Operating ............................... 41 Fan, Cooling........................... 129 Fluid Levels............................ 158 Fluid Part Numbers .................. 169 Fog the Engine ....................... 159 Front Suspension Adjustment .... 143 Fuel Cap.................................. 63 Fuel Safety............................... 46 Fuel Stabilizer......................... 158 Fuses ................................... 149

G Gasoline Handling ..................... 46 Gear Selector ........................... 51 Gearcase Specification Chart ..... 125 Gloves .................................... 14

H Hauling Cargo........................... 92 Headlight Adjustment ............... 148 Headlights Bulb Replacement ................ 147

Helmet .................................... 14 Hood Latches ........................... 64 Hot Exhaust Systems ................. 43 How To Obtain Warranty Service ................................ 180

I Ignition Switch ......................52-53 Improper Tire Maintenance .......... 43 Inspect and Lubricate ............... 158 Instrument Cluster Back Light Color ..................... 81 Back Light Level ..................... 82 Clock ................................... 80 Diagnostic Code..................... 72 Display Area 1 ....................... 69 Display Area 2 ....................... 70 Indicator Lamps ..................... 67

Options Menu ........................ 71 Overview .............................. 66 Service Hours ........................ 83 Unit Selection Distance............ 78 Unit Selection Temperature....... 79

Intake Alert............................... 30

K Know Your Riding Area/Tread Lightly ................................. 86

L Labels Air Filter Caution ............... 21, 29 Belt Warning..................... 15, 22 Clutch Cover Alert .................. 29 Fuel Transport Warning....... 16, 23 General Alert ......................... 30 Hitch Capacity Alert ................ 34 Intake Alert............................ 30 Load/Passenger/Tire Pressure Alert ................................... 32 Maximum Payload Warning ..... 18, 25 Passenger/ Tire Pressure Warning ......................... 19, 25 Passenger/ Tire Pressure Warning, Premium Models.............. 20, 28 Proper Use Warning................ 16 Proper Use Warning, CREW ..... 24 Seat Belt/ Drive Responsibly Warning ......................... 17, 23 Shift Alert.............................. 31

Light Switch.............................. 53 Lightning and Powerlines ............ 46 Lights.................................... 147 Limited Warranty ..................... 177 Low Gear................................. 52 Lubricants / Service Products ..... 169 Lubrication Recommendations ... 120

190

M Maintenance Log..................... 187

N Near Field Communication (NFC) ...9 New Operator Driving Procedures............................. 99 Noise Emission Control System...115 Notice ................................... 181

O Obstacles .............................. 101 Oil and Filter ........................... 158 Oil Check............................... 122 Oil Recommendations .............. 121 Operating With a Load on the Vehicle .................................. 42 Operating Without Instruction ....... 38 Operation Driving Over Obstacles .......... 101 Slippery Surfaces ................. 101

Operation on Public Lands in the U.S.A...............................115 Operator Safety......................... 35 Overflow Bottle Coolant Level .... 130

P Parking on an Incline ................ 104 Parking the Vehicle ..............91, 104 Part Numbers ......................... 169 Plugs, Spark........................... 128 Polaris Products ...................... 169 POLARIS Variable Transmission System.............. 133 Power Steering ......................... 63 Pre-Ride Inspection ................... 88 Protective Apparel ..................... 40 PVT Break-in (Clutches/Belt) ....... 86

R Radiator and Cooling Fan.......... 129 Radiator Coolant Lever ............. 130 Rear Cam Adjustments............. 144 Registration, Warranty .............. 177 Remote Winch Switch (if equipped) ..............................114 Removal from Storage.............. 160 Reverse Operation................... 103 Rider Comfort ........................... 13 Rollover Protective Structure (ROPS).................................. 64

S Safe Operation Practices ............ 86 Safe Riding Gear....................... 13 Safety Labels and Locations .. 15, 22, 29 Safety Symbols ...........................8 Safety Warnings Using Alcohol or Drugs ............ 39

Safety, Winch Maintenance.........114 Seat and Storage Compartments ................... 59, 62 Seat Belt............................. 58, 61 Seat Belts ................................ 40 Seat Removal ........................... 60 Seat Removal - Standard ............ 57 Shock Loading the Winch ...........113 Signal Words ..............................8 Spark Arrester ........................ 140 Spark Plug Gap/Torque............. 128 Spark Plug Inspection............... 128 Spark Plug Recommendations ... 128 Specifications ................... 163, 166 Stabilize the Fuel ..................... 158 Stalling While Climbing a Hill ........ 44 Starting the Engine .................... 90 Steering Wheel Adjustment............................ 50

Steering Wheel Inspection......... 144 Stopping the Engine................... 90 Storage ................................. 158 Storage Area .......................... 159 Switches

191

Light Switch........................... 53 Winch Switch......................... 54

T Throttle Pedal ........................... 56 Tire Tread Depth ..................... 145 Tires ..................................... 145 Towing Loads ........................... 93 Trail Etiquette ........................... 86 Trailer Hitch Bracket................... 65 Transmission Oil Change .......... 126 Transmission Oil Check ............ 125 Transporting the Vehicle Tie Down Points ................... 160

Turning Improperly..................... 44

U Unauthorized Use of the Vehicle ... 43

V Vehicle Identification Numbers ..... 12 Vehicle Immersion ................... 137

W Warning Symbols ........................8 Warranty Coverage And Exclusions Lubricants and Fluids ............ 179

Washing the Vehicle................. 156 Welcome Page ...........................3 Wet Fouled Plug...................... 129 Wheel Installation .................... 146 Wheel Removal....................... 146 Winch Winch Operation .................. 107 Winch Safety Precautions ...... 105

Winch Cable Care ....................112 Winch Maintenance and Service Safety ........................114 Winch Shock Loading................113 Winch Switch............................ 54

192

For your nearest Polaris dealer, call 1-800-POLARIS (765-2747) or visit www.polaris.com

Polaris Inc. 2100 Highway 55 Medina, MN 55340

Part No. 993XXXX Rev 01 Printed in USA

For your nearest Polaris dealer, call 1-8

Manualsnet FAQs

If you want to find out how the Ranger 1000 Polaris works, you can view and download the Polaris Ranger 1000, Crew 1000 v12 Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Polaris Ranger 1000 as well as other Polaris manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Polaris Ranger 1000. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Polaris Ranger 1000, Crew 1000 v12 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Polaris Ranger 1000, Crew 1000 v12 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Polaris Ranger 1000, Crew 1000 v12 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Polaris Ranger 1000, Crew 1000 v12 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Polaris Ranger 1000, Crew 1000 v12 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.