Polaris 800 IQ Owner's Manual PDF

1 of 141
1 of 141

Summary of Content for Polaris 800 IQ Owner's Manual PDF

WARNING

Read, understand, and follow all of the instructions and safety precautions in this manual and on all product labels.

Failure to follow the safety precautions could result in serious injury or death.

WARNING

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

1

WELCOME Thank you for purchasing a Polaris vehicle, and welcome to our world- wide family of Polaris enthusiasts. Be sure to visit us online at www.polarisindustries.com for the latest news, new product introduc- tions, upcoming events, career opportunities and more.

Here at Polaris we proudly produce an exciting line of utility and recre- ational products. Snowmobiles All-terrain vehicles (ATVs) RANGER utility vehicles Victory motorcycles

We believe Polaris sets a standard of excellence for all utility and recre- ational vehicles manufactured in the world today. Many years of experi- ence have gone into the engineering, design, and development of your Polaris vehicle, making it the finest machine we've ever produced.

For safe and enjoyable operation of your vehicle, be sure to follow the instructions and recommendations in this owner's manual. Your manual contains instructions for minor maintenance, but information about major repairs is outlined in the Polaris Service Manual and should be performed only by a Factory Certified Master Service Dealer (MSD) Technician.

Your Polaris dealer knows your vehicle best and is interested in your total satisfaction. Be sure to return to your dealership for all of your ser- vice needs during, and after, the warranty period.

We also take great pride in our complete line of apparel, parts and acces- sories, available through our online store at www.purepolaris.com. Have your accessories and clothing delivered right to your door!

2

POLARIS and POLARIS THE WAY OUT are registered trademarks of Polaris Indus- tries Inc.

Copyright 2008 Polaris Sales Inc. All information contained within this publication is based on the latest product information at the time of publication. Due to constant improvements in the design and quality of production components, some minor discrep- ancies may result between the actual vehicle and the information presented in this publi- cation. Depictions and/or procedures in this publication are intended for reference use only. No liability can be accepted for omissions or inaccuracies. Any reprinting or reuse of the depictions and/or procedures contained within, whether whole or in part, is expressly prohibited. Printed in U.S.A. 2008 800 IQ Owner's Manual P/N 9921747

3

TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 This section contains helpful information for owners and drivers and illustrates the location of important identification numbers that should be recorded in the owner's manual.

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 This section describes safe vehicle operation and identifies warning decals and their locations.

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 This section identifies the locations of your snowmobile's controls and features.

The Perfect Fit . . . . . . . . . . . . . . . . . . . . . . . . . 43 This section explains how to tailor the suspension and other features for an optimum riding experience.

Pre-Ride Inspections . . . . . . . . . . . . . . . . . . . . 58 This section explains procedures that must be performed before riding.

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 This section explains proper engine break-in, operation of features and general operating procedures.

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 This section defines your role, and your dealer's role, in your snowmo- bile's regular maintenance.

Polaris Products. . . . . . . . . . . . . . . . . . . . . . . 118 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 119 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Maintenance Log . . . . . . . . . . . . . . . . . . . . . . 133 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

4

5

INTRODUCTION Important Notes for Owners and Drivers After reading this manual, store it in the snowmobile for convenient ref- erence. It should remain with the snowmobile when the snowmobile is sold. Some of the illustrations and photos used in this manual are general rep- resentations. Your model may differ. Follow the maintenance program outlined in this manual. Preventive maintenance ensures that critical components of the snowmobile are inspected by your dealer at specific mileage intervals. You and your dealer must complete the registration form included with your snowmobile and forward it to us. This completed form is necessary to ensure warranty coverage. Protect and preserve your right to ride by joining your local trail riding clubs.

When teaching inexperienced operators to ride, set up a predetermined course for practice. Make sure they know how to drive and control the snowmobile before allowing them to make longer trips. Teach them proper snowmobile courtesy, and enroll them in drivers training and safety courses sponsored by local or state organizations.

6

INTRODUCTION Preservation of the Environment Polaris is committed to supporting an environmental education cam- paign. We encourage state and provincial governments across the snow- belt to adopt rigorous safety training programs that encourage protection of our environment, including wildlife and vegetation.

Snowmobile clubs and other organizations are working together to pro- tect our environment. Please support their efforts and operate your snowmobile with consideration for the protection and preservation of our environment.

Noise Level One of the most publicized issues about snowmobiles is noise. The Society of Automotive Engineers (SAE), the standard-setting body for snowmobile development, recommends that snowmobiles conform to prescribed sound levels.

Polaris snowmobiles are engineered to conform to these SAE standards. Our muffler systems are designed to reduce noise levels and must not be altered or removed. The sound of your snowmobile may not be welcome to non-snowmobilers, so you have a responsibility to operate your snowmobile with concern for others. We do our part by manufacturing quieter machines; we ask your help to further reduce the impact of noise by operating your snowmobile safely and responsibly.

Air Pollution Polaris engineers continuously investigate ways to reduce emission lev- els of two-stroke engines. We expect our efforts to lead to the reduction of potential air pollution.

In addition to our technological research, we encourage government agencies, manufacturers, distributors, dealers, ecologists, and other interested parties to work together to develop data on environmental topics.

7

INTRODUCTION Vehicle Identification Numbers Record your snowmobile's identification numbers and key number in the spaces provided. Remove the spare key and store it in a safe place. Your key can be duplicated only by mating a Polaris key blank with one of your existing keys, so if both keys are lost, the ignition switch must be replaced.

Vehicle Model Number: ___________________________________________________

Tunnel VIN ( )(right side of tunnel): __________________________________________

Engine Serial Number (on recoil housing): _____________________________________

Key Number: ____________________________________________________________

8

SAFETY Operator Safety The following signal words and symbols appear throughout this manual and on your vehicle. Your safety is involved when these words and sym- bols are used. Become familiar with their meanings before reading the manual.

The safety alert symbol, on your vehicle or in this manual, alerts you to the potential for injury.

WARNING The safety alert warning indicates a potential hazard that may result in serious injury or death.

CAUTION The safety alert caution indicates a potential hazard that may result in minor injury or damage to the vehicle.

NOTICE A notice indicates a situation that may result in damage to the vehicle.

NOTE A note will alert you to important information or instructions.

9

SAFETY Operator Safety Follow the recommended maintenance program beginning on page 80 of this manual to ensure that all critical components on the snowmobile are thoroughly inspected by your dealer at specific mileage intervals.

WARNING

Driving a snowmobile requires your full attention. DO NOT drink alcohol or use drugs or medications before or while driving or riding as a passenger. They will reduce your alertness and slow your reaction time.

Snowmobiles are capable of traveling at high speeds. Use extra caution to ensure operator safety. Make sure your snowmobile is in excellent operating condition at all times. Always check major and vital safety components before every ride.

All Polaris snowmobiles are designed and tested to provide safe operation when used as directed. Failure of critical machine components may result from operation with any modifications, especially those that increase speed or power. DO NOT MODIFY YOUR MACHINE. The snowmobile may become aerodynamically unstable at speeds higher than those for which it is designed. Loss of control may occur at higher speeds. Modifications may also create a safety hazard and lead to bodily injury.

The warranty on your entire machine is terminated if any equipment has been added, or any modifications have been made, to increase the speed or power of the snowmobile.

10

SAFETY Operator Safety Stay Clear of Track Your snowmobile is propelled by a revolving track that must be partially exposed for proper operation.

Stay Clear of Engine Never attempt adjustments with the engine running. Turn off the igni- tion, raise the hood, make the adjustment, secure shields and guards, secure the hood, and then restart the engine to check its operation.

Riding Position Operating a snowmobile requires skill and balance for proper control. Rider positions may vary with experience and the features available on some snowmobiles, but under many conditions, the proper position is to be seated with both feet on the running boards and both hands on the handlebar grips for proper throttle, brake and steering control.

WARNING

Serious injuries may result if hands, feet, or clothing become entangled in the track. Be alert when riding, and remain properly seated to stay clear of the track.

Never hold the snowmobile up or stand behind it while warming up the track. A loose track or flying debris could cause serious injury or death. We recommend having your dealer perform all track service and alignment procedures.

WARNING

Serious injury can occur if fingers or clothing contact the moving parts of an engine. Always stop the engine before attempting adjustments.

WARNING

Improper riding position may reduce control and could result in serious injury or death. Always ride in a position that allows for control of your vehicle.

11

SAFETY Operator Safety Riding Apparel Be prepared, be warm and be com- fortable when riding. Be aware of the weather forecast, especially the windchill, and dress accordingly. See the chart on page 22.

Helmet Wearing a helmet can prevent a severe head injury. Whenever riding a Polaris vehicle, always wear a helmet that meets or exceeds established safety standards.

Approved helmets in the USA and Canada bear a U.S. Department of Transportation (DOT) label.

Approved helmets in Europe, Asia and Oceania bear the ECE 22.05 label. The ECE mark consists of a circle surrounding the letter E, followed by the distinguishing number of the country which has granted approval. The approval number and serial number will also be displayed on the label.

Eye Protection Do not depend on eyeglasses or sunglasses for eye protection. When- ever riding a Polaris vehicle, always wear shatterproof goggles or use a shatterproof helmet face shield. Polaris recommends wearing approved Personal Protective Equipment (PPE) bearing markings such as VESC 8, V-8, Z87.1, or CE. Make sure protective eye wear is kept clean.

WARNING

Avoid wearing loose clothing or long scarves, which can become entangled in moving parts and cause serious injury.

E4

051039 0006.31

12

SAFETY Operator Safety Disabled Operators Safe operation of this rider-active vehicle requires good judgement and physical skills. Operators with cognitive or physical disabilities have an increased risk of loss of control, which could result in serious injury or death.

Survival Preparation For your safety, always ride in a group of other snowmobilers. Always tell someone where you're going and how long you expect to be gone. If it isn't possible to ride with others, and you must travel into remote areas, always carry survival equipment that's appropriate to the condi- tions you may encounter. Such equipment may include, but is not lim- ited to: extra clothing, a sleeping bag, a flashlight, food and water, a signaling mirror, a means of building a fire, and a two-way radio or cel- lular telephone.

For added protection, carry the following items on your snowmobile at all times:

Spare Drive Belt Winter Survival Kit Extra Set of Spark Plugs Trail Map Tow Rope Owner's Manual Extra Oil First Aid Kit Fuel Deicer Tool Kit

13

SAFETY Operator Safety Rider Capacity Driving 1-Up - Some Polaris snowmobiles are designed for a single rider only. A decal on the console of these models indicates single rider operation.

Driving 2-Up - Some Polaris snowmobiles are designed for up to two riders. A decal on the hood of these models indicates that the vehicle is designed for one operator and one passenger only.

Machines designed for two riders should never be operated with more than two people on board. When traveling with a passenger, it's the driver's responsibility to operate the machine safely.

Slow down! Control becomes more difficult with two people on board. More space is required to make turns, and longer distances are necessary for stopping.

Excessive Speed

Always observe all laws governing snowmobile operation and speed limits. Always be alert and pay attention to the trail ahead. Multiplying speed (MPH) by 1.5 will equal the approximate number of feet per sec- ond your machine travels. If your speed is 40 MPH, your machine is traveling about 60 feet per second. If you look back for only two sec- onds, your machine will travel about 120 feet. If your speed is 60 MPH, your machine will travel about 180 feet in two seconds.

Traveling at night requires extra caution. Check headlight and taillight to ensure proper operation, and don't over-drive your headlight beam. Always be able to bring your machine to a stop in the distance illumi- nated by the headlight.

WARNING

High speed driving, especially at night, could result in serious injury or death. Always reduce speed when driving at night or in inclement weather.

14

SAFETY Operator Safety Driver Awareness Slow down when traveling near poles, posts, or other obstacles. Be especially alert if you're snowmobiling after dark. Always be on the alert for wire fences. Single strands are especially dangerous, since there may be a great distance between posts. Guy wires on utility poles are also difficult to distinguish.

Make sure the way is clear before crossing railroads and other roads and highways. The noise of your machine will drown out the sound of approaching vehicles. Look ahead, behind, and to both sides before turning or crossing railroad tracks or high- ways. Steep embankments may also hide your view. Always leave yourself a way out.

Variances in snow depth and/or water currents may result in uneven ice thickness. You may drown if you break through the ice. Avoid travelling on frozen bodies of water.

When teaching inexperienced operators to ride, set up a predetermined course for practice. Make sure they know how to drive and control the snowmobile before allowing them to make longer trips. Teach them proper snowmobile courtesy, and enroll them in driver's training and safety courses.

RR

15

SAFETY Operator Safety Avalanches Snowmobilers should always be properly trained and equipped before traveling in mountainous terrain: Take an avalanche class Travel with experienced people Travel on designated trails Make sure each person is equipped

with a shovel, probe and avalanche beacon.

You don't have to be snowmobiling on a slope for an avalanche to occur. Be aware that all of the snow is connected. You may be riding on a flat slope or snow covered road, but if the snowpack above is unstable enough you can trigger an avalanche on a steeper slope above you. Always be aware of snow conditions above you as you travel in moun- tainous terrain.

Before riding in mountainous terrain, call or log on to your local ava- lanche advisory to get current weather and snow stability information.

For more information about avalanche training and avalanche condi- tions, contact local law enforcement in your area, or visit the American and Canadian online avalanche centers at www.avalanche.org.

16

SAFETY Operator Safety Ice and Snow Build-up

Before driving, manually turn the skis to the left and right to be sure ice and snow are not interfering with full left and right steering. If difficulty is encountered, remove ice and snow build-up that may be obstructing the steering linkage.

Driving on Slippery Surfaces

WARNING

Ice and snow build-up may interfere with the steering of your machine, result- ing in serious injury or death. Keep the underhood area free of snow and ice.

WARNING

Never attempt an abrupt change of direction when operating on slippery sur- faces. Proceed slowly and use extra caution.

Driving on ice or hard-packed snow reduces steering and braking control, which may result in loss of control and serious injury or death. Slow down and use extra caution when operating on slippery surfaces.

17

SAFETY Operator Safety Driving Downhill When riding downhill, shift your weight to the rear of the machine and reduce your speed to a minimum. Apply just enough throttle to keep the clutch engaged, allowing the engine's compression to help slow the machine and keep it from rolling freely downhill.

WARNING

When driving on long downhill stretches, pump the brakes. Riding the brakes may cause the brake system to overheat, which may result in brake failure.

Excessive or repetitive use of the brakes for high speed stops will also cause an overheated brake system. This condition may lead to a sudden loss of brakes and/or fire and may result in serious injury or death.

18

SAFETY Operator Safety Driving in Hilly Terrain

Use extra caution when operating in hilly terrain. If climbing a hill is unavoidable, keep your weight low and forward. If you must cross the face of a slope, keep your weight on the uphill side of the machine to maintain proper balance and avoid possible roll-over.

Slow down when reaching the crest of a hill. Be prepared to react to obstacles, sharp drops or other people or vehicles that may be on the other side of the hill.

If you're unable to continue up a hill, turn the machine downhill before it loses momentum. If this isn't possible, spin the track just enough to dig in to prevent it from rolling back down the hill. Stop the engine and set the parking brake (if equipped). Keeping away from the downhill side of the machine, pull the rear of the snowmobile around and point the front end and skis downhill. Remount the machine, restart the engine, release the parking brake, and descend the hill carefully.

WARNING

Climbing a hill or crossing the face of a slope may result in loss of balance and machine roll-over, causing serious injury or death. Use caution and good judgement when driving in hilly terrain.

19

SAFETY Operator Safety Drive Belt Do not operate the engine with the drive belt removed.

Any servicing that requires operation without a belt must be performed by your dealer. Operation of the engine with the belt removed may result in injury or damage to the engine.

Intake Silencer Do not operate the engine with the intake silencer or filter removed.

Damage to the engine may occur if the intake silencer or filter are removed.

Clutches Do not attempt to service the clutches.

All clutch service must be performed by your dealer. The clutch is a complex mechanism that rotates at high speeds. Each clutch is dynami- cally balanced before installation. Any tampering may disrupt this preci- sion balancing and create an unstable condition.

Cold Weather Drive-Away Whenever your snowmobile has been parked for a length of time, espe- cially overnight, always make sure the skis and track are loosened from ice and snow before attempting to drive. Apply the throttle with enough authority to put the machine into motion, but always operate within safety limits.

Maneuverability While much control and maneuverability is achieved through the steer- ing system and skis, maximum control is achieved by the shifting of your body weight. Maneuverability will change for lighter operators or machines designed to carry a load.

20

SAFETY Operator Safety Inadequate Snow Conditions

Since snow provides the only lubrication for the power slide suspension and, on liquid cooled models, cooling for the engine, adequate snow cover is a requirement for operation of your machine. Driving in too lit- tle snow will result in excessive wear and damage to the slide rail, track and/or engine.

If the machine becomes stuck in snow, clear the running board area of snow, then step down the snow in front of the machine so that when the throttle is opened, the snowmobile will be able to climb up and over the snow.

WARNING

Do not drive for prolonged periods on blacktop, gravel, or ice. Doing so could cause irreversible track damage and lead to serious injury.

NOTICE

When operating on icy surfaces or hard-packed snow, avoid overheating the slide rail and track. Lack of lubrication and cooling will cause overheating of the slide rail and track, resulting in premature wear and failure. If frequently operating in low cooling conditions, see your dealer for an optional wheel kit that will reduce the wear from overheating.

21

SAFETY Operator Safety Driving Responsibly Every snowmobile handles differently, and even the most docile condi- tions may become dangerous if operators drive improperly. If you're new to snowmobiling, acquaint yourself with the machine and with what it will and won't do under various conditions. Even seasoned driv- ers should spend some time getting the feel for a machine before attempting ambitious maneuvers. A snowmobile depends on the rider's body position for proper bal-

ance in executing turns, traversing hills, etc. Always start on a smooth, level area to begin building your operating experience.

Before allowing someone else to use your snowmobile, know the extent of their operating skills. Check to see if they've taken a snow- mobile safety course and have an operator's certificate. For their pro- tection, as well as yours, make sure they take a snowmobile safety course. Everyone can benefit from the course.

Don't "jump" your snowmobile over large drifts or similar terrain. Jumping may injure your back because of spinal compression that could occur when the snowmobile impacts the ground. The seat and suspension of your snowmobile have been designed to provide pro- tection under normal riding conditions. Your snowmobile is not intended for this kind of use.

Be courteous to oncoming traffic by dimming your headlights and reducing your speed.

When traveling in a group of snowmobiles, don't tailgate (follow too closely). Leave enough distance between snowmobiles to provide ample stopping room and to provide protection from flying snow and debris. Allow even more distance when driving on slippery surfaces or when driving in darkness or other low visibility conditions. Be aware of any snowmobile traffic around your vehicle. Drive defen- sively to avoid accidents.

Remove the key from the ignition when you leave the snowmobile unattended.

22

SAFETY Operator Safety Windchill/Temperature Charts The following information is provided to help you determine when tem- peratures become dangerous for riding.

WINDCHILL CHART (_F)

WINDCHILL CHART (_C)

Wind Speed

in MPH

Actual Thermometer Reading (_F)

40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45

Equivalent Temperature (_F)

Calm 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45

5 36 31 25 19 13 7 1 -5 -11 -16 -22 -28 -34 -40 -46 -52 -57 -63

10 34 27 21 15 9 3 -4 -10 -16 -22 -28 -35 -41 -47 -53 -59 -66 -72

15 32 25 19 13 6 0 -7 -13 -19 -26 -32 -39 -45 -51 -58 -64 -71 -77

20 30 24 17 11 4 -2 -9 -15 -22 -29 -35 -42 -48 -55 -61 -68 -74 -81

25 29 23 16 9 3 -4 -11 -17 -24 -31 -37 -44 -51 -58 -64 -71 -78 -84

30 28 22 15 8 1 -5 -12 -19 -26 -33 -39 -46 -53 -60 -67 -73 -80 -87

35 28 21 14 7 0 -7 -14 -21 -27 -34 -41 -48 -55 -62 -69 -76 -82 -89

40 27 20 13 6 -1 -8 -15 -22 -29 -36 -43 -50 -57 -64 -71 -78 -84 -91

45 26 19 12 5 -2 -9 -16 -23 -30 -37 -44 -51 -58 -65 -72 -79 -86 -93

50 26 19 12 4 -3 -10 -17 -24 -31 -38 -45 -52 -60 -67 -74 -81 -88 -95

55 25 18 11 4 -3 -11 -18 -25 -32 -39 -46 -54 -61 -68 -75 -82 -89 -97

60 25 17 10 3 -4 -11 -19 -26 -33 -40 -48 -55 -62 -69 -76 -84 -91 -98

Frostbite in >> 30 min. 10 min. 5 min.

Wind Speed

in KPH

Actual Thermometer Reading (_C)

5 2 -1 -4 -7 -10 -13 -16 -19 -22 -25 -28 -31 -34 -37 -40 -43 -46

Equivalent Temperature (_C)

Calm 5 2 -1 -4 -7 -10 -13 -16 -19 -22 -25 -28 -31 -34 -37 -40 -43 -46

8 3 0 -4 -7 -11 -14 -18 -22 -25 -29 -32 -36 -39 -43 -46 -50 -53 -57

16 2 -2 -6 -10 -13 -17 -21 -24 -28 -32 -36 -39 -43 -47 -50 -54 -58 -62

24 1 -3 -7 -11 -15 -19 -22 -26 -30 -34 -38 -42 -45 -49 -53 -57 -61 -65

32 0 -4 -8 -12 -16 -20 -24 -28 -32 -36 -39 -43 -47 -51 -55 -59 -63 -67

40 -1 -5 -9 -13 -17 -21 -25 -29 -33 -37 -41 -45 -49 -53 -57 -61 -65 -69

48 -1 -5 -9 -13 -18 -22 -26 -30 -34 -38 -42 -46 -50 -54 -58 -62 -66 -70

56 -2 -6 -10 -14 -18 -22 -26 -31 -35 -39 -43 -47 -51 -55 -59 -64 -68 -72

64 -2 -6 -10 -15 -19 -23 -27 -31 -35 -40 -44 -48 -52 -56 -61 -65 -69 -73

72 -2 -7 -11 -15 -19 -23 -28 -32 -36 -40 -45 -49 -53 -57 -61 -66 -70 -74

80 -3 -7 -11 -15 -20 -24 -28 -33 -37 -41 -45 -50 -54 -58 -62 -67 -71 -75

88 -3 -7 -12 -16 -20 -24 -29 -33 -37 -42 -46 -50 -55 -59 -63 -67 -72 -76

96 -3 -8 -12 -16 -21 -25 -29 -34 -38 -42 -47 -51 -55 -60 -64 -68 -73 -77

Frostbite in >> 30 min. 10 min. 5 min.

23

SAFETY Safety Decals and Locations Warning decals have been placed on the snowmobile for your protec- tion. Read and follow the instructions of the decals and other warnings on the snowmobile carefully. If any of the decals depicted in this manual differ from the decals on your snowmobile, always read and follow the instructions of the decals on the snowmobile.

If any decal becomes illegible or comes off, contact your Polaris dealer to purchase a replacement. Replacement safety decals are provided by Polaris at no charge. The part number is printed on the decal.

Clutch Cover Warning This warning decal is found under the hood on the clutch cover:

WARNING Do not operate engine with hood open. Do not attempt adjustment with engine running. Do not operate engine with plenum/belt guard removed. Never run engine with drive belt removed. Never service clutches yourself -- see your dealer.

Pressure Cap Warning This warning decal is found under the hood on the pressure cap of appli- cable liquid cooled models:

Do not open hot. Test or replace when changing coolant. Press down and turn to release cap. 13 PSI

24

SAFETY Safety Decals and Locations No Passenger Warning Snowmobiles designed for a single rider only have the NO PASSENGER warning decal on the console:

WARNING This vehicle is designed for operator only. NO PASSENGER

Hot Surface Warning The hot surface warning is located near the rear of the tunnel:

WARNING HOT SURFACE - DO NOT TOUCH Burn may result. Entire top of tunnel may be hot. Install only accessories specifically approved for this model by Polaris.

Track Warning The track warning decal is at the rear of the tunnel:

WARNING Stay clear of track. Do not sit on seat back. Entanglement with the track or a fall from seat back may result in severe injury or death.

No Passenger Warning

Track Warning

Hot Surface Warning

25

SAFETY Safety Decals and Locations Reverse Warning The reverse warning decal is located on the console beside the steering post:

WARNING Reverse operation, even at low speeds, can cause loss of control resulting in serious injury or death. To avoid loss of control, always: Look behind before and while

backing up. Avoid sharp turns. Shift to or from reverse only

when stopped. Apply throttle slowly. NOTE: For more information, see Owner's Manual. If electric reverse: Machine stopped and engine at idle, push yellow button on LH con-

trol to reverse. Flashing light on dash indicates reverse operation. Push button again to return to forward.

Operation Warning The operation warning decal is also located on the console. See page 26 for the text.

Reverse Warning

Operation Warning

26

SAFETY Safety Decals and Locations Operation Warning

To avoid serious injury or death, read and understand all warnings and the Owner's Manual before operation. If manual is missing, con- tact a Polaris dealer for a replacement.

This vehicle is capable of high speeds. Buried objects or uneven terrain can cause loss of control. Reduce speed and use extreme caution when operating in unfamiliar terrain.

Excessive speed, especially at night or with limited visibility, can result in insufficient time for you to react to terrain changes, to avoid unexpected obstacles, or to stop safely.

Never consume alcohol or drugs before or while operating this vehi- cle.

In an emergency, push down the Auxiliary Shut-Off Switch, located on the top of the throttle control assembly, to stop the engine. Then pull the brake lever to stop.

Always wear an approved helmet, eye protection, and adequate clothing while operating this vehicle.

This vehicle is designed for adult use only. Check local laws for age requirements.

When operating with a passenger (on approved models only) reduce speed and allow extra space for steering and stopping. A passenger reduces your ability to control the vehicle.

When operating on hard-packed snow, ice, or when crossing roads, steering and braking ability are greatly reduced. Reduce speed and allow extra space to turn or stop.

To maintain vehicle control on ice or hard-packed surfaces, you should have a proper balance of ski carbides to track studs. See Owner's Manual for proper use of traction products.

Repeated stops from high speed may cause fading or sudden loss of braking ability.

Parking brake may relax when used for long periods. Do not leave brake engaged for more than five minutes.

Before starting engine, check throttle, brake, and steering for proper operation. Make sure hood is latched. Be seated and in posi- tion to control the vehicle.

Oil injection system: Use unmixed fuel only. Check oil level when refueling.

27

FEATURES

Not all models are equipped with all features shown.

8

13

5

6 7

12

11

2 1

3

4

10

9

1. Nosepan 2. Skis 3. Front Bumper (do not use for

pulling or dragging the snow- mobile)

4. Hood 5. Headlight 6. Windshield

7. Handlebar 8. Operator Seat 9. Taillight 10. Rear Bumper 11. Snow Flap 12. Suspension 13. Track

28

FEATURES

Not all models are equipped with all features shown. 1. Fuel Filler Cap 2. Ignition Switch 3. MFD Gauge 4. Engine Stop Switch 5. Throttle Control 6. Recoil Starter Handle 7. Hood Hold Down Straps 8. Parking Brake Lock 9. Handlebar Grip Warmer Switch 10. Thumbwarmer Switch 11. Electronic Reverse Button 12. Multi-Function Display (MFD)

Control 13. Headlight Dimmer Switch 14. Brake Lever

1

2

4

5

7

6

3

12

11

13

8 9 10

14

29

FEATURES Cargo Area The maximum weight capacity for the cargo area is 15 lbs. (7 kg). Install only accessories specifically approved for this model by Polaris. Always secure cargo before operating. Do not exceed the cargo area weight limit.

Adjustable Headlights Adjust the headlight beam by moving the adjuster to the left or right.

30

FEATURES Detonation Elimination Technology (DET) The DET system prevents damage to the engine from detonation by automatically reducing the engine timing and adding fuel whenever the sensors detect detonation.

You may notice decreased engine RPM and performance when DET is activated, but in most cases DET activation is temporary, and the timing will return to normal automatically. In extreme conditions the DET sys- tem retards timing and holds it in a retarded state. If this occurs, replace the fuel with recommended fuel or see your Polaris dealer for service.

Sensor Fail-Safe The DET includes a sensor fail-safe system to prevent the engine from damage if the sensor fails, becomes disconnected or is unable to detect detonation. The rider will experience a loss of power. The sensor must be reconnected or repaired to regain full power. See your Polaris dealer for service if this occurs. NOTE: The check engine light will flash six times if the sensor fails or

becomes disconnected.

Cause of DET Activation Solution

Poor quality fuel Replace with higher quality fuel Improper engine modifications Do not modify the engine

31

FEATURES Instrumentation MFD Component Identification

Digital Display Identification

Item

1 Analog (if equipped)

2 Digital Gauge

3 CHECK ENGINE Indicator

4 Low Oil Indicator

5 High Temp Indicator

6 Brake Indicator

7 Reverse Indicator

8 High Beam Indicator

Item

1 RPM or Speed Altitude (if equipped) Service Interval

2 Electrical System Voltage Level

3 MAX - Maximum MPH/ KPH or RPM

MPH -Miles per hour KPH - Kilometers per hour RPM -Engine crankshaft

revolutions per minute

4 Air Temp (if equipped) Engine Temp Degrees Celsius Degrees Fahrenheit

5 Miles Kilometers

6 Hours Trip 1/Trip 2/Trip F Service Label Altitude Label

7 Fuel Level (if equipped)

1 2

3 4

5 6 7 8

1 2

3 4

5 6 7

32

FEATURES Instrumentation MFD Settings With the engine running, use the MFD Control Switch to set the MFD display to your preference. The rocker switch ( ) has a MODE but- ton (top) and a SET button (bottom).

Standard vs. Metric The MFD will display either stan- dard or metric units of measurement. While viewing a screen that displays measurements (MPH, KPH or tem- peratures), press and hold the MODE switch until the unit of measure- ment changes (about 10 seconds).

33

FEATURES Instrumentation MFD Settings Speedometer/Tachometer The speedometer and tachometer can be viewed in either the analog or the digital display. If the analog display is set to show speedometer read- ings, the digital screen will automatically display the tachometer (option 1). If the analog is set to show the tachometer, the digital screen will show the speedometer (option 2).

To change preferences, press and hold the MODE button for three sec- onds. When the button is released, the new setting becomes active and screen colors change. See table below.

Option Analog Display

Digital Display

Analog Screen

Digital Screen

1 Speed RPM Blue mph Blue Backlight

2 RPM Speed Red X100rpm

Red Backlight

34

FEATURES Instrumentation MFD Digital Display Programs Press the MODE button to cycle through the three MFD programs: Per- formance, Engine and History. Each program will remain in the display until another is selected. NOTE: The analog will always display either MPH or engine RPM

(whichever setting is selected) regardless of the display pro- gram being viewed.

Performance Program The Performance Program automatically displays either speed or tachometer, whichever is opposite the analog display. See page 33. It also displays electrical system voltage and fuel level (if equipped).

While in the Performance mode, press the SET button to cycle through the odometer, Trip 1, Trip 2, Trip F (if equipped with electronic fuel gauge) and Clock settings.

35

FEATURES Instrumentation MFD Digital Display Programs Trip Settings Trip 1 and Trip 2 are odometers used to check fuel mileage or to keep track of distance traveled.

1. To reset a trip odometer to zero, enter the Trip 1 or Trip 2 display.

2. Press and hold the SET button for two seconds.

If the snowmobile is equipped with an electronic fuel gauge, Trip F automati- cally displays when the fuel level is low. The fuel symbol and the last fuel bar on the MFD gauge will blink when the fuel level reaches 1/8th tank. The Trip F odometer records distance traveled until enough fuel is added to raise the level above 1/4 tank. The fuel symbol and the fuel bar will continue to blink until the fuel level is above 1/4 tank. The Trip F odometer will automatically reset to zero after refueling.

Odometer Setting The odometer records the vehicle's total distance traveled since manufacture. The odometer cannot be reset.

36

FEATURES Instrumentation MFD Digital Display Programs Performance Program Clock Setting

1. While in the CLOCK display, press and hold the SET button for five seconds.

2. When the hour starts flashing press the SET switch once to advance one hour, or press and hold the SET button to advance the hour once every 0.2 seconds.

3. Press the MODE button to save the hour and flash the minutes. 4. Set the minutes in the same manner. 5. When finished, press the MODE button to save the new setting. NOTE: If the MODE button is not pressed within ten seconds, the clock

will automatically save the new entry.

37

FEATURES Instrumentation MFD Digital Display Programs Engine Program The Engine Program automatically displays the engine coolant tempera- ture, engine hours, electrical system voltage level and fuel level (if equipped). On machines equipped with altimeter sensor and ambient air temperature sensors, altitude and ambient air temperature will display as additional screens in the engine program. Press the SET button to dis- play the ambient air temperature and altitude screens.

Air Temperature (if equipped)

The MFD displays actual air temperature. Press and hold the MODE switch for ten seconds to switch between standard and metric units of measurement.

Hour Meter

The hour meter records the total hours of engine operation since manufacture. This meter cannot be reset.

Engine Temperature

A thermometer measures water temperature, giving an indication of engine temperature.

38

FEATURES Instrumentation MFD Digital Display Programs Engine Program Altitude (if equipped)

The rider can calibrate the altimeter for current atmospheric conditions. Altimeter accuracy will be +/-300 ft. (91 m) after adjustment. NOTE: Press and hold the MODE switch for

ten seconds to switch between stan- dard and metric units of measure- ment. When "ALt" displays, the program is in the metric mode.

1. Enter the Engine Program and select the altimeter display. 2. Press and hold the SET button for five seconds. 3. When the digits begin to flash, press the SET button once to

advance 50 feet (15 m), or press and hold the button to advance 100 ft. (30 m) every 0.1 seconds. Adjust the altitude display to within 50 ft. (15 m) of current altitude.

NOTE: The gauge reads barometric pressure and allows the rider to compensate for daily fluctuations in air pressure. The gauge can adjust the displayed altitude to +/- 1300 ft. (396 m) from the preset value. It will adjust up to +1300 ft. (396 m) above the cal- ibrated altitude. Once the +1300 ft. (396 m) offset has been reached, the next adjustment is -1300 ft. (396 m) from the cali- brated altitude, and 50 ft. (15 m) will be added to the altitude each time the SET button is pressed.

4. Press the MODE button to hold the reading at the adjusted value. If it's not pressed within five seconds, the gauge will automatically save the new setting.

39

FEATURES Instrumentation MFD Digital Display Programs History Program The History Program automatically displays electrical system voltage level and fuel level (if equipped).

While in the History mode, press the SET button to view maximum vehicle speed, maximum engine rpm or the current service interval set- ting. The gauge automatically logs the maximum speed and engine rpm even if the History Program is not currently displayed.

The History Program will display the history of the Maximum Speed, Maximum RPM and Service Interval settings.

Maximum Speed/RPM Reset

While in either the MAX MPH or the MAX RPM mode, press and hold the SET button for three seconds to reset the recorded maxi- mum values for both MPH and RPM. Both of these values are reset at the same time. Reset the MAX MPH/RPM values before each run to obtain accurate readings. NOTE: Due to electrical noise, the MFD

may occasionally display MAX MPH/RPM values that are not rep- resentative of actual values.

40

FEATURES Instrumentation MFD Digital Display Programs Service Interval Reminder The gauge logs the number of engine hours between service reminders. When the logged hours reaches the designated service interval (set by the user), the gauge provides a reminder that service is due. "SErVCE" will flash in the odometer area and "ENG" will flash in the icon area for five sec- onds each time the vehicle is started until the service reminder is reset.

To reset the reminder at the existing interval:

1. Enter the service interval screen. 2. Press and hold the SET button for ten seconds, continuing to hold

even after the display begins to flash. 3. When the display stops flashing, release the button. The service

interval has been reset.

To reset the reminder at a new interval:

1. Enter the service interval screen. 2. Press and hold the SET button for five seconds, until the hours

begin to flash. 3. Immediately release the button. 4. Press the button again up to five times to advance the reminder in

50-hour increments. NOTE: The maximum interval is 250 hours.

To disable the service interval reminder, press the SET button once after reaching 250 hours on the display. The gauge will display "OFF".

41

FEATURES Instrumentation MFD Battery Replacement (models with clocks) If the clock function of the MFD isn't working properly, replace the battery. Replacement batteries are available from your dealer.

1. Remove the plenum from the under- side of the hood.

2. Locate the black battery compart- ment. It has a red wire and a brown wire with a white stripe. It's located about three inches down the main harness from the point where the harness connects to the MFD.

3. Cut the plastic cable tie from the out- side of the compartment.

4. Carefully cut the bottom of the com- partment (opposite the wires) to separate the heat-sealed seams. Squeeze the corners of the compartment inward so the battery is visible.

NOTE: Note the orientation of the battery before removing it. An incor- rectly installed battery will not maintain the clock.

5. Using needle-nose pliers, grasp the battery and rotate it so the lead- ing edge of the battery is raised slightly away from the battery holder. Pull the battery out gently.

NOTE: The battery will not come out of the holder unless the leading edge of the battery is raised. Hold the battery compartment, not the wires, while removing the battery. Pulling on the wires will separate them from the battery holder.

42

FEATURES Instrumentation MFD Battery Replacement (models with clocks) 6. Install a new battery with fingers only. 7. Seal the end of the battery compartment using high strength double-

sided tape between the two compartment halves or high strength single-sided tape around the outside of the compartment.

8. Make sure the taped seam of the compartment faces the downward side of the wire harness.

9. Install a cable tie to secure the compartment to the wire harness in the same location where the previous cable tie was located. Make sure the battery wires are not stretched tight.

Gauge Cleaning 1. Wipe the gauge face as needed using a clean cloth and a mild soap

and water solution. Wipe dry with clean, soft cloth. 2. Clean the back side of the gauge using a clean cloth and a mild soap

and water solution. Do not remove the electrical connectors or pro- tective rubber boot. Do not spray the back side of the gauge or the wire harness with a pressure washer or other water source.

NOTICE

To prevent damage to the lens, do not use alcohol for cleaning. Do not allow chemicals or sprays to come into contact with the lens. Immediately clean off any gasoline that splashes on the gauge during refueling.

43

THE PERFECT FIT Front Suspension Adjustments Independent Front Suspension (IFS) Break in the suspension for about 150 miles (240 km) before making any fine-tuning adjustments.

Settings will vary from rider to rider, depending on rider weight, vehicle speed, riding style, and trail conditions. We recommend starting with factory settings and then customizing each adjustment individually to suit rider preference. The machine should be methodically tested, one change at a time, under the same conditions (trail and snow conditions, vehicle speed, riding position, etc.) after each adjustment until the best ride is achieved.

IFS Components 1. Skis 2. Front shocks and springs 3. Rod ends 4. A-arms

IFS Adjustment Options Front shock spring preload Optional springs Optional shock valving

1 2

3

4

44

THE PERFECT FIT Front Suspension Adjustments Shock Spring Preload Increasing spring preload will increase ski-to-ground pressure. Decreasing spring preload will decrease ski-to-ground pres- sure. When adjusting, be sure the springs on both the left and right sides of the machine are at the same adjustment.

To change front shock spring preload, grasp the spring and rotate it.

Increasing the spring preload too much may adversely affect the handling of the snowmobile and the performance of the suspension. Never exceed one inch of pre- load beyond the factory settings, and ensure that both sides are adjusted the same. When decreasing preload, make sure at least two turns of preload are hold- ing the spring between the retainer on the top of the shock and the threaded spring preload adjuster nut on the shock body. Failure to do so could cause the retainer to fall off when the suspension is fully extended. NOTE: Not all models have shocks with thread-adjustable spring pre-

load. See your dealer for more information.

NOTICE

On some models equipped with a plastic adjuster nut, the nut will break if it is unscrewed from the threaded body. Do not force the nut if resistance sud- denly increases while youre turning it.

Low Preload

High Preload

45

THE PERFECT FIT Front Suspension Adjustments Shock Valving Some shocks can be revalved if spring preload alone isn't sufficient and further adjustment is desired to control suspension stiffness. Please see your Polaris dealer.

WARNING

Changing shock valving requires special tools and a sound knowledge of mechanical theory, tool use, and shop procedures to perform the work safely and correctly. Shocks contain high-pressure nitrogen gas. Use extreme cau- tion when handling high-pressure service equipment. We recommend that this work be performed by a Polaris dealer.

46

THE PERFECT FIT Rear Suspension Adjustments Rider weight, riding style, trail conditions, and vehicle speed all affect suspension action.

Each rear suspension can be adjusted to suit rider preference and deliver excellent performance for a given set of conditions. However, all sus- pension designs and adjustments involve a compromise, or trade-off. For example, a suspension set up for snowcross racing would provide a very stiff ride on the trail. A suspension set up for trail riding would bot- tom out harshly on a snowcross course.

Refer to the suspension setup label on your snowmobile, or see your Polaris dealer for initial suspension setup information. Additional adjustments can be made after initial setup. Make adjustments to one area at a time so you can evaluate the change. For further assistance, see your dealer.

47

THE PERFECT FIT Rear Suspension Adjustments Suspension Performance Tips Rider weight usually determines the position at which the spring pre-

load should be set. However, this may vary with riding style. With a little experimentation, each rider can find a preferred setup. These adjustments are easy to make, involve very little time or effort, and greatly affect the ride.

In deep snow, a new rail slide will offer improved performance over worn rail slide. It can also improve top speed.

When riding on ice or hard-packed snow, adding a set of bogie wheels to the rail may enhance the machine's performance. Bogie wheel kits are available from your dealer.

Polaris offers track kits for improved flotation in deep snow. See your dealer for assistance.

NOTE: Keep the suspension pivot points lubricated. This will reduce moisture and rust build-up and ensure proper function of the suspension components. Grease rear suspension pivots before adjusting the rear suspension. Refer to Suspension Mainte- nance beginning on page 114.

Track Tension Track adjustment is critical for proper handling. Always maintain cor- rect tension and alignment. Refer to the track tension maintenance sec- tion beginning on page 108.

48

THE PERFECT FIT IQ Rear Suspension Adjustments Initial Spring Preload Setting (Sag Method) To set up the rear suspension torsion spring preload, measure the distance between the ground and rear bumper. This is measurement X.

Take the first measurement with no rider and with the rear suspension at full extension. NOTE: The rear bumper may need to

be lifted upward slightly to fully extend the rear suspension.

Next, have the rider drop down hard on the seat and bounce up and down sev- eral times, collapsing the rear suspen- sion. With the rider seated, measure the distance between the ground and the rear bumper at the exact location used for measurement X. This is measure- ment Y.

X

Y

49

THE PERFECT FIT IQ Rear Suspension Adjustments Initial Spring Preload Setting (Sag Method) To determine sag, commonly referred to as ride-in, subtract measure- ment Y from X (sag=X-Y). If the measured sag is incorrect, adjust the FRA position and/or rear torsion spring preload.

NOTE: This is only an initial setup, and final spring preload may vary based on rider preference and riding conditions.

Suspension Recommended Sag Adjustment See Page

IQ (121) 4-5 inches (10-13 cm) Torsion Spring Preload

50

50

THE PERFECT FIT IQ Rear Suspension Adjustments Torsion Spring Preload To adjust rear torsion spring preload, rotate the three-position cam using the engine spark plug tool. Adjustment is easiest when the cam is rotated from low to medium, and then to high. Rotating directly from low to high will require significantly more effort.

Different rate torsion springs are available if a firmer ride is desired. See your dealer for more information.

Limiter Strap Position (Ski Pressure) Ski pressure is set at the factory to deliver the optimum balance between ride and handling. If a rider prefers more ski pressure for improved steering performance, adjustments can be made to the front limiter straps. Tighten the straps to increase ski pressure. Loosen the straps to reduce ski pressure.

1. Remove the nuts and flat washers from the upper limiter straps.

2. Relocate the straps to the desired position. 3. Reinstall the nuts and washers. Tighten securely.

Soft Medium Firm

Upper Nuts

51

THE PERFECT FIT IQ Rear Suspension Adjustments Suspension Coupling On all Polaris snowmobile rear suspensions, there are two torque arms that control the movement of the rail beam. Prior to the advent of sus- pension coupling, these torque arms could move independently of each other. Rear suspension coupling links the movement of the front and rear torque arms to each other. There are two types of rear suspension coupling.

Front To Rear Coupling and the Front Rear Scissor Stop (FRSS)

The front rear scissor stop (FRSS) couples the movement of the front torque arm with the rear torque arm and limits the amount of indepen- dence between the movement of the front torque arm and the rear torque arm.

When hitting a bump, the front torque arm starts to compress. The FRSS links that movement to the rear torque arm, causing it to compress and raise the rear suspension up as one, allowing the suspension to hit the bump only once and reducing kickback.

The factory setting is usually adequate for all riders and conditions.

52

THE PERFECT FIT IQ Rear Suspension Adjustments Rear To Front Coupling and the Rear Rear Scissor Stop (RRSS)

The rear rear scissor stop (RRSS) couples the movement of the rear torque arm with the front torque arm and limits the amount of indepen- dent movement between the rear torque and the front torque arm.

Adjusting the RRSS either allows more weight to transfer to the rear for more traction, or allows less weight to transfer to the rear, resulting in improved cornering performance. An adjustment dot is located on the RRSS. This dot is on the longest end of the scissor stop.

Rear Rear Scissor Stop (RRSS) - Attributes Moving the RRSS to a higher position will have the following effects on the suspension: Reduced weight transfer. Improved chatter bump ride. Improved cornering performance.

53

THE PERFECT FIT IQ Rear Suspension Adjustments Weight Transfer During Acceleration The preferred method for control- ling weight transfer during accel- eration is by adjusting the rear rear scissor stop (RRSS). The factory setting is the best for most trail riding conditions.

To decrease weight transfer under acceleration (for improved corner- ing), rotate the RRSS to a higher position.

To increase weight transfer or ski lift during acceleration, rotate the RRSS to a lower position. NOTE: Your dealer can help you

with initial setup and addi- tional setup instructions to help you achieve your optimum ride. A scissor stop tool is also available from your dealer.

HIGH

LOWLOW

MEDIUM

RRSS FRSS

54

THE PERFECT FIT Handlebar Adjustments Handlebar Position 1. Loosen the four bolts on the

bottom of the adjuster block. NOTE: If necessary, pry the blocks

apart with a screwdriver.

2. Adjust the handlebar forward or rearward to the desired position.

3. Tighten the bolts.

Handlebar Angle 1. Loosen the four bolts on the

top of the adjuster block. NOTE: If necessary, pry the blocks

apart with a screwdriver.

2. Adjust the handlebar forward or rearward to the desired angle.

3. Tighten the bolts.

Loosen top bolts to adjust handlebar angle

Loosen bottom bolts to adjust handlebar position

55

THE PERFECT FIT Accessories Polaris offers a wide range of accessories for your snowmobile to help make each ride more enjoyable.

Use only Polaris parts and accessories on your Polaris snowmobile. Use of unapproved parts and accessories may result in: Non-compliance with government/industry requirements Voiding of warranty Injury to self or others

This applies, but is not limited to the following areas: brakes, clutches, fuel systems, and exhaust systems. NOTE: Exhaust systems are critical safety areas that must use

approved Polaris parts. Please see your Polaris dealer for ser- vice.

56

THE PERFECT FIT Traction Products Studs Before equipping your machine with traction products, be aware of the laws in your area pertaining to the use of traction products.

Use only Polaris traction products on your snowmobile. Track warran- ties are void if track damage or failure results from improper or exces- sive stud installation or the use of non-Polaris traction products.

See your dealer about installing studs and/or carbides.

Track studding will enhance braking control on hard-packed snow or ice, but extreme caution is still required on such surfaces. Steering abil- ity may be reduced on hard-packed snow or ice.

When studded tracks are used, increased wear to the brake pads will result from increased braking. Extended-wear brake pad kits are avail- able. See your dealer.

NOTICE

Always install wear strips before installing studs. Failure to install wear strips may result in cooler or tunnel damage. See page 57.

Never add shims to the wear strip. Track damage will result because of lack of clearance between upper carrier wheels and track.

Use of studs longer than the recommended length on machines equipped with center coolers will result in center cooler damage or damage to the tun- nel.

NOTICE

Aggressive studding patterns may require grinding protruding stud bolts flush to prevent idler wheel damage. Maintain track tension on studded tracks on the tight side of the spec to prevent heat exchanger damage. The center of the stud must be at least 1 1/8I (2.86 cm) from the outside edge of the track.

57

THE PERFECT FIT Traction Products nCarbide Skags A skag is a replaceable bar attached to the underside of the ski to assist in turning the snowmobile and to prevent ski wear caused by contact with roads and other bare terrain. Use carbide skags with studded tracks to help maintain proper vehicle steering and control. See page 113.

If your machine has carbide skags, it may be necessary to add track studs to maintain proper vehicle control. Maintain a proper balance between the number of studs and the length of carbide on the skags (the more studs you use, the longer the carbide on the skags should be). See your dealer's track studding chart.

Wear Strips To avoid excessive tunnel wear, tunnel wear strips must be installed whenever track studding is used. Wear strips are designed for a specific stud length. See your dealer's studding chart for recommended trac- tion accessories.

NOTICE

Whenever wear strips are relocated, be sure there's adequate stud clearance to the heat exchangers. Lack of clearance may result in damage to heat exchangers.

58

PRE-RIDE INSPECTIONS Pre-Ride Checklist Inspect all items on the checklist for proper operation or condition before each use of the snowmobile. Procedures are outlined on the refer- enced pages. Look for a checkmark (n) on the referenced pages to locate the pre-ride inspection items.

Item See Page

Drive Belt Condition 102

Steering System 62

Recoil Rope 63

Coolant Level 91

Parking Brake Lock/Brake Lever/Brake System 60, 61, 96

Auxiliary Shut-Off Switch (Engine Stop Switch) 64

Ignition Switch 64

Taillight/Brakelight/Headlight 64

Suspension Mounting Bolts 114

Skags (Wear Bars) 113

Ski Saddle and Spindle Bolts 114

Hood Straps/Latches 63

Seat Latches (if equipped) 63

Throttle Lever/Safety Switch 72, 73

Rear Wheel Idler Bolts 109

Tether Switch/Strap (if equipped) 64

Track Alignment/Condition 62, 110

Rail Slide Condition 114

Chaincase Oil Level 85

Injection Oil Level 71

59

PRE-RIDE INSPECTIONS Before Starting the Engine Before starting the engine, always refer to all safety warnings pertaining to snowmobile operation. Never start the engine without checking all vehicle components to be sure of proper operation.

Read and Understand Your Owner's Manual Read the Owner's Manual completely and refer to it often. The manual is your guide to safe and enjoyable snowmobiling experience.

n Throttle Lever The throttle and brake are the primary controls of your snowmobile. Always make sure both are functioning properly.

Squeeze the throttle lever to make sure it compresses evenly and smoothly. When released, the lever should immediately return to the idle position without binding or hesitation. If the throttle does not func- tion smoothly, or if you discover excessive lever freeplay, DO NOT start the engine. Have the throttle serviced immediately.

n Throttle Safety Switch Test the throttle safety switch system before the machine is operated. See page 72.

WARNING

Operating the vehicle with worn, damaged, or malfunctioning components could result in serious injury or death. Never start the engine without check- ing all vehicle components to be sure of proper operation.

60

PRE-RIDE INSPECTIONS Before Starting the Engine n Brakes Always check the following items for proper operation before starting the engine.

Brake Lever Travel Squeeze the brake lever. It should move no closer to the handgrip than 1/2I (1.3 cm). A smaller distance indicates low brake fluid level or air in the hydraulic system. Refer to the brake bleeding infor- mation on page 98 or see your dealer for service.

Lever Feel If the brake lever feels spongy when squeezed, check the brake fluid level and condition. Add fluid as needed. See page 97.

WARNING

Continued use of spongy brakes may cause a complete loss of brakes, which could result in serious injury or death. Always have the brakes serviced at the first sign of sponginess.

1/2I (1.3 cm)

61

PRE-RIDE INSPECTIONS Before Starting the Engine n Parking Brake Lever Lock Use the parking brake lever lock only when you want the machine to remain stationary; for example, when parked on an incline for a period of five minutes or less.

1. Brake Lever 2. Parking Brake Lever

Lock 3. Master Cylinder Reser-

voir/ Cover 4. Fluid Level Indicator

Lock Engagement To engage the lock, squeeze the brake lever tightly and push forward on the lock. Hold the lock forward while releasing the brake lever. NOTE: If the brake lever is squeezed tightly enough, the lock will move

freely into place. Do not force the lock or it may break.

The brake light will illuminate if the parking brake lever lock is set while the engine is running. It will also illuminate when the service brake is in use. If the parking brake light does not come on when the parking brake or service brake is in use, have it serviced by your dealer.

Lock Release To release the lock, squeeze the brake lever tightly. The lock will return to the unlocked position.

WARNING

If the parking brake lever lock is partially or entirely engaged while riding, the brakes may overheat, resulting in brake damage. In extreme cases it could cause a fire, which could result in serious injury or death. Always ensure that the lever lock is completely disengaged before operating the snowmobile.

1

2 3 4

62

PRE-RIDE INSPECTIONS Before Starting the Engine n Steering System

Before driving, manually turn the skis to the left and right to be sure ice and snow are not interfering with full left and right steering. If difficulty is encountered, remove ice and snow build-up that may be obstructing the steering linkage.

n Track

NOTE: Track damage or failure caused by operation on ice or poor lubrication conditions voids the track warranty.

WARNING

Ice and snow build-up may interfere with the steering of your machine, result- ing in serious injury or death. Keep the underhood area free of snow and ice.

WARNING

Operating the snowmobile with a damaged track increases the possibility of track failure, which could cause loss of control resulting in serious injury or death. Always inspect the track for damage before using the vehicle.

Use of traction products such as studs increases the possibility of track dam- age and/or failure. Driving at high speeds for extended periods of time in marginal lubrication could severely damage track rods, break track edges, and cause other track damage. Examples of marginal lubrication would include frozen bodies of water without snow cover, icy trails, and no-snow conditions.

63

PRE-RIDE INSPECTIONS Before Starting the Engine n Hood Latches The hood of the snowmobile protects the operator from moving parts as well as aiding in sound emission control and other functions. Under no circumstances should your snowmobile be operated with the hood open or removed. Always ensure that the hood straps are in good condition and that the latches are securely in place before operating the snowmo- bile.

n Seat Latches If your snowmobile is equipped with a removable seat, ensure that the seat latches are securely in place before every use of the snowmobile.

n Recoil Rope Inspect the recoil rope and handle for excessive wear, and make sure the knot securing the rope inside the handle is secure. If excessive wear is found, see your Polaris dealer for replacement.

64

PRE-RIDE INSPECTIONS Start the Engine and Check Before starting the engine, always refer to all safety warnings pertaining to snowmobile operation. Never engage the starter when the engine is running. Never start the engine without checking all vehicle components to be sure of proper operation. See Before Starting the Engine beginning on page 59. n Engine Stop Switch

Check the auxiliary shut-off switch for proper operation. Push the switch down to stop the engine. Pull it up to allow restarting. n Ignition Switch

Make sure the engine stops when the ignition switch is turned to OFF. n Tether Switch (if equipped)

If your machine has a tether switch, remove the tether from the switch to make sure the engine stops immediately. n Lighting

Check the headlight (high and low beam), taillight, and brake light. Replace burned out lamps before operating. n Mirrors (if equipped)

Adjust the mirrors so they can be used to their full advantage. n Operating Area

Before driving away, check your surroundings. Be aware of obstacles and make sure bystanders are a safe distance from the machine.

65

OPERATION Starting the Engine

1. Turn the key to the ON position. 2. Pull the engine stop switch up to the RUN position. 3. If equipped with electric start, turn the key to START to crank the

engine. Release the key to the ON position when the engine starts. 4. If not equipped with electric start, grasp the starter handle and pull

slowly until the recoil engages; then pull abruptly to crank the engine.

NOTE: If the engine does not start after several attempts, slightly depress the throttle (no more than 1/4I open) while cranking the engine. When the engine starts, immediately release the throttle.

NOTICE

Engaging the starter when the engine is running WILL result in serious engine damage, especially if the transmission is in reverse. Never engage the starter when the engine is running.

WARNING

Don't pull the starter rope to the fully extended position and don't allow it to snap back into the housing. Damage may result.

To avoid injury and/or engine damage, do not operate the electric starter or pull-rope starter while the engine is running.

66

OPERATION Engine Break-In No single action on your part is as important to long, trouble-free machine life as proper break-in of a new or rebuilt engine. Premix the first tank of fuel with one pint of Polaris injection oil for each five gal- lons of fuel. This, in addition to the lubrication supplied by the injection system, will assure proper engine break-in.

NOTICE

Excessive heat build-up during the first three hours of operation will damage close-fitted engine parts. Do not operate at full throttle or high speeds for extended periods during the first three hours of use. Vary the throttle open- ings and machine speeds to reduce friction on all close-fitting machined parts, allowing them to break in slowly without damage.

Use of any lubricants other than those recommended by Polaris may cause serious engine damage. We recommend the use of Polaris lubricants for your vehicle.

Drive with extra caution during the break-in period. Perform regular checks on fluid levels, lines, and all other important areas of the machine.

67

OPERATION Engine Break-In Oil Injection System Always check and fill the oil tank when refueling. See page 71.

Oil Recommendations This snowmobile is equipped with a variable exhaust system (VES). Engine lubrication comes from oil added to the fuel and oil injection systems. Polaris recommends the use of VES II 2 Cycle Oil for this engine. See page 118 for the part numbers of Polaris products.

Never mix brands of oil. Serious chemical reactions can cause injection system blockage, resulting in serious engine damage. Oils may also be incompatible and the result could be sludge formation, filter blockage, and reduced cold weather flow rates. All Polaris oils are compatible with each other.

Slide Rail and Track Cooling

NOTICE

Serious engine damage can occur without the proper lubrication. Check the oil tank level often during the first tank of fuel. If the oil level doesn't go down, contact your dealer immediately.

NOTICE

Inadequate cooling and lubrication will lead to overheating of the slide rail and track, resulting in premature wear and failure. Reduce speeds and fre- quently drive into fresh snow to allow adequate cooling and polishing of the slide rail and track surfaces. Avoid operating on ice, hard-packed surfaces or roads.

68

OPERATION Track Warm-Up

Follow these steps to ensure proper warm-up of the engine, drive train and track.

1. Use an appropriate stand to securely sup- port the rear of the snowmobile at the rear bumper. The track should be about 4I (10 cm) off the ground.

2. Start the engine and allow it to warm up two to three minutes.

3. Depress the throttle abruptly and allow the track to rotate several revolutions.

NOTE: It will take longer to warm up the track sufficiently during colder outdoor tem- peratures.

4. Release the throttle, apply the brakes, shut off the engine and lower the machine to the ground.

5. Grasp the skis by their front loops and move them from side to side to loosen snow and ice.

WARNING

A loose track or flying debris could cause serious injury or death. Stand clear of the front of the machine and the moving track. Never hold the snowmobile up or stand behind it while warming up the track. Do not use excessive throt- tle during warm-up or when the track is free-hanging. Use a stable rear sup- port.

WARNING

Use of traction products such as studs, ice growsers, etc. will increase the possibility of track damage and/or failure. This could cause loss of control, resulting in serious injury or death. Always inspect for track damage before operating the snowmobile.

69

OPERATION Fuel

WARNING

Gasoline is highly flammable and explosive under certain conditions.

Always exercise extreme caution whenever handling gasoline.

Always refuel outdoors or in a well-ventilated area. Always turn off the engine before refueling.

Do not overfill the tank. Do not fill the tank neck.

Do not smoke or allow open flames or sparks in or near the area where refueling is performed or where gasoline is stored.

If gasoline spills on your skin or clothing, immediately wash it off with soap and water and change clothing.

Never start the engine or let it run in an enclosed area. Engine exhaust fumes are poisonous and can cause loss of consciousness or death in a short time.

WARNING

The engine exhaust from this product contains chemicals known to cause cancer, birth defects or other reproductive harm. Operate this vehicle only outdoors or in well-ventilated areas.

70

OPERATION Fuel For peak performance, Polaris recommends the use of 91 octane or higher fuel. Although 87 octane fuel is usable, some engine perfor- mance will be lost and fuel economy will decrease. Do not use lower than 87 octane fuel. Do not use fuel containing more than 10% ethanol (including E85).

Fuel System Deicers If you use non-oxygenated fuel, Polaris recommends the regular use of isopropyl-based fuel system deicer. Add one to two ounces per gallon (8-16 ml per liter) of gasoline to prevent engine damage resulting from fuel system icing and lean fuel mixtures. Never use deicers or additives containing methanol. Polaris also recommends the use of Carbon Clean Plus. See page 118 for the part numbers of Polaris products.

If you use oxygenated fuel containing ethanol, additional alcohol deic- ers or water absorbing additives should not be used.

NOTICE

Operating with obstructed fuel systems will result in serious engine damage. Perform maintenance as recommended.

Prolonged exposure to petroleum based products may damage paint. Always protect painted surfaces when handling fuel.

71

OPERATION n Oil Low Oil Indicator Light The low oil indicator light will alert the operator if the oil level is low. Visually check for oil in the bottle. Add oil before further operation of the snowmobile. See page 67 for oil recommendations.

Low Oil Level Maintaining the proper oil level will prevent system aeration and possi- ble loss of pumping action, which could result in engine damage. This is especially important when the machine is operated in mountainous ter- rain.

Always maintain a visible level of oil in the tank. If oil is not visible, continued operation may cause serious engine damage. See page 67 for oil recommendations.

The Polaris oil cap on the oil bottle is vented to allow proper oil flow. See your Polaris dealer for recommended replacement parts.

NOTICE

Operating the snowmobile without adequate engine lubrication can result in serious engine damage. Always check the oil level when refueling. Add oil as needed.

72

OPERATION n Engine Stop Switch Push down on the engine stop switch ( ) to ground out the ignition and stop the engine quickly. Pull the switch up to the ON position to allow restarting.

n Throttle Safety Switch The throttle safety switch is designed to stop the engine whenever all pressure is removed from the throttle lever and the throttle cable or valves do not return to the normal closed position.

Test the throttle safety switch system daily before operation.

1. Sit on the seat. 2. Start the engine and allow it

to idle. 3. Hold the throttle lever pin

stationary by exerting pres- sure on the pivot pin in the direction shown in the illustration.

4. Apply a slight amount of throttle. A properly functioning switch must shut down the engine.

WARNING

Operating the snowmobile with a faulty throttle safety switch can result in serious injury or death in the event of an accident. If the throttle safety switch does not shut off the engine during a carburetor/throttle system malfunction, immediately push down the engine stop switch. Do not start the engine again until the malfunction has been corrected by your dealer.

73

OPERATION Throttle Lever

If the engine stops abruptly when the throttle lever is released:

1. Turn the ignition switch to OFF. 2. Visually inspect the throttle cable and carburetor/throttle body to

determine what caused the safety switch to activate. 3. Test the throttle lever by compressing and releasing it several times.

The lever and cable must return to the idle position quickly and completely.

4. If the throttle lever operates properly, turn the ignition switch on and go through normal starting procedures.

5. If the engine doesn't start, take the snowmobile to an authorized Polaris dealer for service.

Excessive freeplay in the throttle cable may cause the safety switch to activate, preventing the engine from starting. If this occurs, return the machine to an authorized Polaris dealer for service.

If an emergency exists and it's necessary to start the engine, the throttle safety switch and engine stop switch may be disconnected from the wire harness. When these switches are disconnected, the ignition key switch must be used to shut off the engine. DO NOT continue to operate the machine with the throttle safety switch disconnected. Return the machine to an authorized Polaris dealer for service as soon as possible.

WARNING

An improperly functioning throttle lever may cause erratic machine behavior and loss of control, which could result in serious injury or death. If the throttle lever does not work properly, DO NOT start the engine.

74

OPERATION Emergency Stopping The following chart lists methods for stopping the snowmobile in the event of an emergency. See page 72 for more information about the engine stop switch and throttle safety switch.

SYSTEM WHAT IT DOES

Ignition Switch Interrupts ignition circuit

Brake Slows jackshaft

Engine Stop Switch Interrupts ignition circuit

Throttle Safety Switch Interrupts ignition circuit

Tether Switch (Option) Interrupts ignition circuit

75

OPERATION Electronic Reverse (PERCt) Electronic reverse will activate only if the engine RPM is below 4000.

WARNING

Improper reverse operation, even at low speeds, may cause loss of control, resulting in serious injury or death. Damage will occur to the chaincase or transmission if shifting is attempted when the engine is operating above idle speed.

Shift to or from reverse only when the snowmobile is stopped and when engine speed is at idle.

Look behind the vehicle before and while backing.

Avoid sharp turns. Apply throttle slowly.

NOTICE

Engaging the starter when the engine is running WILL result in serious engine damage, especially if the transmission is in reverse. Never engage the starter when the engine is running.

76

OPERATION Electronic Reverse (PERCt) Engaging Reverse 1. Stop the snowmobile and leave the engine idling. 2. Make sure the area behind your vehicle is clear. 3. Push the yellow reverse button on the left-hand control for one sec-

ond, then release. The engine will automatically reduce RPM and start a reverse rotation. A flashing reverse light on the instrument panel will indicate that the transmission is in reverse.

4. Apply the throttle slowly to make sure the transmission is in reverse.

NOTE: The maximum engine RPM will be 6000 when in reverse.

NOTE: If the engine stops running, the snowmobile will be in forward gear when it's restarted.

Disengaging Reverse 1. Stop the snowmobile and leave the engine idling.

2. Push the yellow reverse button for one second and release. The engine will slow and begin to rotate forward. The light on the instrument panel will shut off.

3. Apply the throttle slowly to make sure the transmission is in for- ward.

NOTICE

Engaging the starter when the engine is running WILL result in serious engine damage, especially if the transmission is in reverse. Never engage the starter when the engine is running.

77

OPERATION Daily Storage At the end of each ride, park the snowmobile on a level surface and sup- port it at the rear with an appropriate track stand. The track should be suspended approximately 4I (10 cm) off the ground.

Remove the key and cover the machine.

Towing Do not use the front bumper to pull or drag the snowmobile. The front bumper is not designed for this type of use and may detach from the vehicle if force is applied.

For your safety, do not attempt to use a tow hitch until you've read the following warnings and understand the proper hitch functions.

If the snowmobile becomes inoperable and must be towed, and if it isn't possible to use a rigid tow bar, attach the tow rope to the ski spindles (not to the ski loops) to prevent damage to the steering components. Remove the drive belt before towing, and have someone ride on the towed snowmobile to operate the brake and steering when necessary.

WARNING

Objects towed with a rope have no braking power and can easily collide with the rear of the snowmobile or other objects, resulting in serious injury or death. DO NOT tow toboggans, sleds, saucers, or any type of vehicle with a rope. Only a stiff metal pole connecting the towed object and the tow hitch on the snowmobile should be used. If passengers are to be towed on a tobog- gan or sled, make sure the pole is at least four feet (1.2 meters) long to pre- vent any possibility of contact between the snowmobile's track and a person riding in the towed object.

Braking distances increase when towing loads. Slow down to maintain con- trol of the snowmobile.

NOTICE

Towing a disabled snowmobile with the drive belt in place can result in seri- ous damage to the engine and drive system. Always remove the drive belt from a disabled snowmobile before towing.

78

MAINTENANCE Emission Control Information Any qualified repair shop or qualified person may maintain, replace, or repair the emission control devices or systems on your snowmobile.

Emission Control Label Your snowmobile is equipped at the time of sale with an emission control information (ECI) label and a factory-installed emissions information hangtag. These items are required by U.S. Environmental Protection Agency regulations. The ECI label is permanently affixed to either the right side of the tunnel or the engine recoil cover. The ECI label should not be removed, even after you purchase the snowmobile. You may remove the factory-installed emissions information hangtag, which is intended solely for your use in making a purchasing decision.

Emission Control Maintenance Requirements Your snowmobile is certified to operate on gasoline with a minimum octane level of 87 (R+M)/2. If your snowmobile is equipped with a check engine light and it comes on, you must take your snowmobile to a qualified dealer for diagnostic service. Specifications and adjustments for engine tune-ups are located in the Service Manual, which is avail- able to your qualified service technician. Reverse (if equipped) must not be engaged during engine tune-ups.

79

MAINTENANCE Emission Control Information Owner's Responsibilities Please read the Snowmobile Engine Emissions Limited Warranty on page 131, and read the maintenance section of your owner's manual. You are responsible for ensuring that the specified maintenance is per- formed.

Polaris recommends that you contact an authorized Polaris dealer to per- form any service that may be necessary.

80

MAINTENANCE Polaris Recommended Maintenance Program To ensure many trouble-free miles of snowmobiling enjoyment, follow recommended regular maintenance and perform service checks as out- lined in this manual. Record maintenance and service in the Mainte- nance Log beginning on page 133.

The recommended maintenance schedule on your snowmobile calls for service and maintenance inspections at 150 miles (240 km), 500 miles (800 km) and 1000 miles (1600 km). These inspections should be per- formed by a qualified service technician. For continued optimum perfor- mance and component life, continue maintenance checks at 1000 mile (1600 km) intervals.

All necessary replacement parts and labor incurred, with the exception of authorized warranty repairs, become the responsibility of the regis- tered owner. If, during the course of the warranty period, part failures occur as a result of owner neglect in performing recommended regular maintenance, the cost of repairs are the responsibility of the owner.

Personal safety is critical when attempting to service or make adjust- ments to your snowmobile. If you're not familiar with safe service or adjustment procedures and the use of tools, or if you don't feel comfort- able performing these tasks yourself, contact an authorized Polaris dealer for service.

NOTICE

Hot components can cause damage to plastic. Always make sure the exhaust system and engine have cooled before tipping the snowmobile on its side for service or inspection.

81

MAINTENANCE Periodic Maintenance Interval Table The following chart is a guide based on average riding conditions. You may need to increase frequency based on riding conditions. When inspection reveals the need for replacement parts, always use genuine Polaris parts, available from your Polaris dealer.

I - Inspect (clean, adjust, tighten, lubricate, replace if necessary) C - Clean R - Replace L - Lubricate

Item See Page

Frequency 150 mi.

(240 km) 500 mi.

(800 km) 1000 mi.

(1600 km) 2000 mi.

(3200 km) Pre-

Season

CLUTCH

Clutch Alignment Offset (without belt)

101 I I I

Drive Belt Condition 102 I I I I

Clutches 101 C C C

Belt Tension -- I I I I

Clutch Sheaves 101 I I I I

ENGINE/COOLING

Engine Mounts -- I I I I

Recoil Rope -- I I I I

Engine Torque Stop 105 I I I I

Cylinder Head Bolts -- I I I

Cylinder Base Nuts -- I I I I

Ignition Timing BTDC -- I I I

VES System -- C C C I

Coolant Level 91 I I R I

Coolant Hose -- I I I I

Heat Exchangers 93 I I I I I

Coolant Circulation -- I I I

Coolant Leaks -- I I I I

Spark Plug Condition 88 I I I R I

Exhaust Pipe 94 I I

Exhaust Retaining Springs

94 I I I I

82

MAINTENANCE Periodic Maintenance Interval Table

Item See Page

Frequency 150 mi.

(240 km) 500 mi.

(800 km) 1000 mi.

(1600 km) 2000 mi.

(3200 km) Pre-

Season

BRAKES

Hose Routing -- I I I I

Hose Condition -- I I I I

Fluid Leaks -- I I I I

Brake Pads 96 I I I I

Brake Disc -- I I I I

Parking Brakes 61 I I I I

Brake System 60, 96 I

Brake Fluid 97 R

FUEL MANAGEMENT

Idle RPM -- I I I

Throttle Lever 73 I I I I I

Oil Pump Lever (synchronize)

-- I I I

Throttle Cable 85 L L L

Throttle Position Sensor

-- I I I

Fuel Lines 90 I I I I I

Fuel Filter 90 R R

Oil Filter 89 R R

Oil Lines 89 I I I

Air Box -- I I I I I

ELECTRICAL

Auxiliary Shut-Off Switch

64 I I I I I

Throttle Safety Switch 72 I I I I I

Ignition Switch -- I I I I I

Taillight 64 I I I I I

Brakelight 64 I I I I I

Headlight 64 I I I I I

83

MAINTENANCE Periodic Maintenance Interval Table

I - Inspect (clean, adjust, tighten, lubricate, replace if necessary) C - Clean R - Replace L - Lubricate

Item See Page

Frequency 150 mi.

(240 km) 500 mi.

(800 km) 1000 mi.

(1600 km) 2000 mi.

(3200 km) Pre-

Season

CHASSIS

Ski Toe Alignment -- I I I

Suspension Mounting Bolts

-- I I I I I

Steering Fasteners -- I I I I C

Rear Suspension Fasteners

-- I I I I I

Suspension Shock Oil -- I I I I

Cooling Fins and Shroud

-- I I I I

Drive Shaft Bearing 84 L L L I

Jackshaft Bearings 116 L L L I

Skags (Wear Bars) 113 I I I I I

Ski Saddle/Spindle Bolts

-- I I I I I

Drive Chain Tension 95 I I I I I

Hood Latches 63 I I I I I

Rear Wheel Idler Bolts 109 I I I I I

Idler Bolt Jam Nut 109 I I I I I

Rear Suspension Pivot Shafts

84 L L L

Steering Post U-Joint 84 L L L

Camber Alignment -- I I I

Handlebar Centering -- I

Tether Switch and Strap 64 I I I I I

Track Alignment 110 I I I I I

Track Tension 108 I I I I I

Front Limiter Strap -- I I I I I

Rail Slide Condition 114 I

Chaincase Oil 85 I I I R I

84

MAINTENANCE Lubrication Rear Suspension Lubricate the suspension pivot shafts with Polaris Premium All Season Grease at the intervals outlined in the Periodic Maintenance Table beginning on page 80 and before seasonal storage. When operating in heavy, wet snow conditions, lubricate every 500 miles (800 km).

Lack of lubrication will adversely affect your ride and the life of the sus- pension. For more information about suspension lubrication and adjust- ments, see your Polaris dealer.

IQ Rear Suspension

Driveshaft Bearing Inject grease into the fitting on the speedometer sensor housing until grease purges from the seal on the inside of the tunnel. This should take approximately two pumps. Do not use more than four pumps.

85

MAINTENANCE Lubrication Throttle Cable Lubricate the throttle cable lightly with grease or oil. With the engine off, turn the handlebars to the left and lubricate liberally as shown.

n Chaincase Oil Check the chaincase oil level at the intervals outlined in the maintenance charts beginning on page 80. The sight glass (1) is located on the lower rear of the chaincase. Maintain the oil level at or slightly below the center of the sight glass (2). Change the chaincase oil after the first 500 miles (800 km), then every 1000 miles (1600 km) or seasonally.

Polaris recommends the use of Polaris Synthetic Chaincase Lube. See page 118 for the part numbers of Polaris products.

Oil Check 1. Position the vehicle on a level sur-

face. 2. View the oil level at the sight glass. 3. Remove the fill plug (3) and add the

recommended oil as needed. Do not overfill.

4. Reinstall the fill plug, making sure it is seated properly.

1

3

2

86

MAINTENANCE Lubrication Chaincase Oil Oil Change 1. Position the vehicle on a level surface. 2. Remove the drain plug (4) and drain

the oil into a drain pan. Allow the oil to drain completely.

3. Clean off all metal shavings from the plug.

4. Install a new sealing washer on the drain plug.

NOTE: The sealing surfaces on the drain plug and the oil tank should be clean and free of burrs, nicks or scratches.

5. Reinstall the drain plug. Torque to 6-10 ft. lbs. (8-13 Nm). 6. Remove the fill plug. Clean off all metal shavings from the plug. 7. Add 11 oz. (325 ml) of the recommended oil. Do not overfill. 8. Reinstall the fill plug, making sure it is seated properly.

4

87

MAINTENANCE Spark Plugs A new engine can cause temporary spark plug fouling due to the preser- vative added during the assembly process. Avoid prolonged idle speeds, which cause plug fouling and carbonization.

Refer to your Owner's Manual Supplement for the specific spark plug to be used in your machine.

Change the spark plugs every 2000-2500 miles (3200-4000 km).

NOTICE

Using non-recommended spark plugs can result in serious engine damage. A spark plug with a heat range too high will always cause engine damage if the engine is operated in conditions more severe than intended for that plug. Always use the spark plugs recommended for your snowmobile. See your Owners Manual Supplement.

Use recommended spark plugs with the proper gap.

Use only resistor-type spark plugs.

Torque spark plugs to 18-22 ft. lbs. (24-30 Nm). Always carry spare spark plugs.

88

MAINTENANCE Spark Plug Condition Spark plug condition is indicative of engine operation. The spark plug firing end condition should be read after the engine has been warmed up and the vehicle has been driven at higher speeds. Immediately check the spark plug for correct color.

Normal

The normal insulator tip is gray, tan or light brown. There will be few combustion deposits. The electrodes are not burned or eroded. This indi- cates the proper type and heat range for the engine and the service. NOTE: The tip should not be white. A white insulator tip indicates over-

heating, caused by use of an improper spark plug or incorrect carburetor/throttle body adjustments.

Wet Fouled

The wet fouled insulator tip is black. A damp oil film covers the firing end. There may be a carbon layer over the entire nose. Generally, the electrodes are not worn. General causes of fouling are excessive oil or use of non-recommended injection oil.

WARNING

A hot exhaust system and engine can cause serious burns. Wear protective gloves when removing a spark plug for inspection.

89

MAINTENANCE Spark Plug Removal and Replacement 1. Remove the spark plug cap. 2. Using the special wrench provided in

the tool pouch, rotate the spark plug counterclockwise to remove.

3. Reverse the procedure for spark plug installation.

4. Torque to 18-22 ft. lbs. (24-30 Nm). 5. Reinstall the spark plug cap.

Oil Lines Inspect oil line condition every 1000 miles (1600 km).

Oil Filter The oil filter is located at the side of the oil tank. Have your dealer change the oil filter and bleed the system annually or every 1000 miles (1600 km). NOTE: The direction of the arrows

indicates the direction of flow through the filter.

90

MAINTENANCE Intake Filters The intake foam filters limit snow ingestion into the intake system. When operating in loose powder snow, check the foam fil- ters periodically to remove any accumulation of snow.

Fuel Pump All fuel pump service must be performed by an authorized Polaris dealer. Do not attempt to service the fuel pump.

Fuel Filter/Fuel Lines See your Polaris dealer for replacement of the fuel filter every 1000 miles (or annually).

Inspect the fuel lines regularly for signs of deterioration or damage. Always check fuel line condition after periods of storage. Normal dete- rioration from weather and fuel compounds may occur. Replace worn or damaged fuel lines promptly.

NOTICE

Operating the snowmobile with the intake filters removed may cause carbu- retor icing. The result will be poor fuel economy or carburetor malfunction. Always reinstall the intake filters before operating the snowmobile.

NOTICE

Kinking the fuel lines or using a pliers or similar tools to remove fuel lines may cause damage to the lines. If a fuel line has been damaged or kinked, replace it promptly.

91

MAINTENANCE Cooling System Coolant The coolant supplied in the system at the factory is a 50/50 mixture of ethylene-glycol and distilled water, which will provide adequate freeze protection under most conditions. If the vehicle will be stored or oper- ated at extremely low temperatures, greater protection may be required. Please see your Polaris dealer.

When adding or changing coolant, Polaris recommends using Premium 60/40 anti-freeze coolant, which is already premixed and ready to use. Do not dilute with water. Never exceed a 60% antifreeze/40% water mixture. See page 118 for Polaris products. NOTE: Never add tap water to the cooling system. Minerals cause

deposits and may react adversely with the metals in the engine and cooling system.

n Coolant Level The engine coolant level is controlled by the recovery system. The recovery system components are: Coolant bottle or overflow tank Engine filler neck Pressure cap Connecting hoses

Always maintain the coolant level between the minimum and maximum marks on the coolant bottle (when engine is cold) to prevent overheating and serious engine damage.

NOTICE

Operating the snowmobile with insufficient coolant will result in overheating and serious engine damage. Always maintain the coolant level as recom- mended.

92

MAINTENANCE Cooling System Coolant High Temperature Indicator Light

The high temperature indicator light will illuminate when engine cool- ant temperature becomes too hot for safe continued operation of the engine. If you must drive your machine after the high temperature indi- cator light has come on, drive slowly and stop frequently to allow the engine to cool down. Driving in deep snow will also help cool the engine. See your dealer for service. Add coolant if the level is low. NOTE: Engine performance will be reduced if you continue operating

when the high temperature light is on.

Flushing the Cooling System To ensure that the coolant maintains its ability to protect the engine, drain the system completely every two years and add a fresh mixture of antifreeze and distilled water. This service must be performed when the engine is cold. Ask your Polaris dealer to check the coolant when he performs the fall tune-up on your snowmobile.

WARNING

Steam and hot liquids will cause serious burns to your skin. Never remove the pressure cap when the engine is warm or hot.

93

MAINTENANCE Cooling System Bleeding the Cooling System

Use of a non-standard pressure cap will not allow the recovery system to function properly. If the pressure cap needs replacement, contact your dealer for the correct part.

Perform the bleeding procedure when the engine is cold.

1. Position the vehicle so that the top of the tunnel is level. Elevate the front of the vehicle slightly if necessary.

2. Remove the pressure cap and fill the coolant bottle with properly mixed coolant to the maximum mark.

3. Remove the bleed screw from the water outlet manifold and/or the thermostat housing. Allow the coolant to bleed through the system until it runs out the bleed holes. Reinstall the bleed screw into the manifold.

4. Add coolant to the coolant bottle to the maximum mark. 5. Start the engine and run at a fast idle for two to three minutes.

Loosen the bleed screw occasionally to purge any trapped air. 6. Stop the engine and check the coolant bottle level. Fill as required. 7. Feel the heat exchangers under the running boards. If the system is

bled properly, they'll be warm to the touch. If they're not, repeat step 5. Lift the front of the machine slightly to assist in the bleeding.

8. Replace the pressure cap and carefully lower the front end of the machine.

WARNING

Steam and hot liquids will cause serious burns to your skin. Never bleed the cooling system or remove the pressure cap when the engine is warm or hot.

NOTICE

If coolant flow becomes restricted or plugged, coolant loss, air lock or engine damage may result. Most cooling systems are equipped with a filter that should be periodically inspected or replaced.

94

MAINTENANCE Exhaust System Check the exhaust system for wear or damage at approximately 2000 miles (3200 km). Always allow the engine and exhaust system to cool completely before inspecting.

1. Open the hood and inspect the muffler and pipes for cracks or dam- age.

2. Check for weak or missing retaining springs or damper/support grommets.

3. Check for loose clamps on the pipe covers.

WARNING

Hot exhaust system parts can cause serious burns. Allow adequate time for the exhaust system to cool. Never perform this procedure with the engine running.

95

MAINTENANCE Drive Chain Tension Check drive chain tension weekly and before each long trip. To obtain correct chain tension:

1. Rotate the driven clutch counter- clockwise to move all chain slack to the tensioner side. Lock the brake lever lock, or have an assistant hold the brake lever firmly.

2. Loosen the adjuster bolt jam nut (1). 3. Finger tighten the adjuster bolt (2)

until it can no longer be adjusted by hand, then back off 1/4 turn.

4. Tighten the jam nut while holding the adjuster bolt. Torque to 21 ft. lbs. (28 Nm).

5. Release the brake lever lock.

1

2

96

MAINTENANCE Brakes Hydraulic Brake Inspection Inspect the brake lever reserve before each use of the snowmobile. See page 60.

Brake pads must be replaced when the brake pad material becomes thin- ner than the backing plate (approximately 1/16I). A kit is available for replacing brake pads. See your dealer.

Brake Components 1. Brake Caliper 2. Brake Disc 3. Brake Pad Material

(Replace when thickness is less than 1/16I/1.5 mm).

Excessive Lever Travel Hydraulic brakes are self- adjusting, but if excessive brake pad clearance develops, bring the machine to an autho- rized Polaris dealer for inspec- tion and adjustment.

WARNING

Brake failure during operation can result in serious injury or death. Properly functioning brakes are vital to your safety. Be sure the brake pads do not drag on the disc and that brake lever travel is not excessive.

Always replace brake pads when the brake pad material becomes thinner than the backing plate (approximately 1/16I).

2

1 3

97

MAINTENANCE Brakes Brake Fluid The brake fluid level can be seen through a plastic sight glass in the brake reservoir. If the fluid is sufficient, the sight glass will be black. If the sight glass is any color other than black, add brake fluid.

Replace brake fluid at least every two years with Polaris DOT 4 high temperature brake fluid. See page 118 for the part numbers of Polaris products.

WARNING

After opening a bottle of brake fluid, always discard any unused portion. Never store or use a partial bottle. Brake fluid is hygroscopic, meaning it rap- idly absorbs moisture from the air. The moisture causes the boiling tempera- ture of the brake fluid to drop, which can lead to early brake fade and the possibility of accident or serious injury.

WARNING

Keep the master cylinder cover free of dirt and debris. The vent slits allow for diaphragm movement, and if they become plugged, movement of brake fluid below the diaphragm may be restricted, altering brake function.

NOTICE

Brake fluid will damage decals, paint and some plastics. Always wipe up spills immediately.

98

MAINTENANCE Brakes Bleeding the Hydraulic Brake System Air in the hydraulic brake system will cause spongy brake lever action. Bleed the system before operating the snowmobile.

During the bleeding procedure, keep the brake handle as level as possi- ble. The reservoir must be in this position to minimize the possibility of air entering the system through the reservoir vent.

1. Remove the brake master cylinder reservoir cover and gasket. 2. Fill the master cylinder reservoir to between the MIN and MAX

marks or 1/4-5/16I (.6-.8 cm) below the lip of the reservoir open- ing. Reinstall the gasket and cover.

3. Slip a rubber tube over the ball of the bleeder valve and direct the flow of fluid into an approved container.

4. Squeeze the brake lever a full stroke. Then unscrew the bleeder valve 3/4 of a turn to release air.

5. Close the bleeder valve and release the brake lever. 6. Repeat steps 4 and 5 until fluid flows from the bleeder valve in a

solid stream free of air bubbles.

7. After bleeding is complete, refill the reservoir to the proper level. See page 97.

8. Reinstall the gasket and cover.

WARNING

Operating the vehicle with a spongy brake lever can result in loss of brakes, which could cause an accident and lead to serious injury or death. Never operate the vehicle with a spongy-feeling brake lever.

WARNING

Overfilling the master cylinder leaves no room for fluid expansion and may cause the brakes to lock, resulting in serious injury or death. Always add brake fluid to the fill line as recommended.

99

MAINTENANCE Lights NOTE: Do not touch a halogen bulb with bare fingers. Oil from skin

leaves a residue, causing a hot spot that will shorten the life of the lamp. If fingers do touch the bulb, clean it with an alcohol- moistened towel.

Headlight Bulb Removal 1. Remove the plenum covering

from the headlight assembly. 2. Lift the rubber boot to expose

the bulb. 3. Push down on the spring (1)

to release it from the housing. 4. With the wire harness (2)

attached to the bulb (3), with- draw the bulb from the hous- ing.

5. Grasp the bulb by its metal base and carefully separate the bulb from the harness.

1

2

3

100

MAINTENANCE Lights Headlight Bulb Installation 1. Hold the bulb by its metal base and install it into the wire harness. NOTE: Recommended replacement bulbs include H4, HB2 and 9003

bulbs.

2. Insert the bulb into the housing. 3. Connect the spring to the housing. 4. Carefully flip the spring back into the housing, placing it around the

wire harness. 5. Reinstall the plenum covering on the headlight assembly. 6. Verify headlight aim.

Taillight/Brakelight Replacement 1. Remove the screws securing the taillight lens. Remove the lens. 2. Push the bulb inward and turn it counterclockwise to remove it. 3. Install a new bulb. Push the bulb inward and turn it clockwise to

secure it. 4. Reinstall the taillight lens.

101

MAINTENANCE Clutch System Periodically inspect clutch sheaves for damage, wear or belt residue. To maintain optimum performance, clean with non-oil based cleaners such as isopropyl alcohol.

Clutch Alignment Offset Clutch alignment offset is important for maintaining optimum perfor- mance. See your dealer for service and adjustments. A special tool is required to check for proper alignment.

Clutch Center Distance See your Owner's Manual Supplement for recommended center distance for your machine. If adjustment is necessary, see your dealer.

WARNING

If you become aware of higher than normal clutch engagement or an unusual vibration or shift pattern, see your dealer immediately. Do not operate the machine until repairs have been made.

All clutch maintenance and repairs must be performed by an authorized Polaris dealer. Any unauthorized modifications to clutches, such as adding or removing weights, will void the warranty.

NOTICE

The bushings in the weights and rollers of Polaris clutches are made of a material that may be damaged if lubricated. Do not lubricate clutch bushings.

102

MAINTENANCE Clutch System n Drive Belt Condition Periodically check the condition and tension of the drive belt, and always carry a spare. Inspect the belt for signs of excessive wear: frayed edges, missing cogs, cracks and excessive looseness. Replace the belt if any of these conditions exist. See Drive Belt Troubleshooting on page 123.

Always carry a spare drive belt for emergency use. Store the spare belt on top of the electrical box, which is mounted to the clutch cover.

For improved drive-away during extremely cold tem- peratures, remove the belt and warm it to room tem- perature. Reinstall it before starting the snowmobile.

103

MAINTENANCE Clutch System n Drive Belt Deflection Measure belt deflection with both clutches at rest and in their full neutral position.

Place a straight edge (1) on the belt and apply downward pressure while measuring at point 2. This measurement should be 1 1/4I (3.2 cm).

Drive Belt Adjustment 1. Install the L-wrench into the open threaded hole in the outer sheave

of the clutch (see page 104). Turn the wrench clockwise slightly to remove pressure from the sheaves.

2. Loosen the 7/16I jam nut. 3. Using a 1/8I Allen wrench, turn the set screw inward (clockwise) to

increase the distance between the sheaves or outward (counter- clockwise) to decrease the distance.

4. Tighten the jam nut. Remove the L-wrench and store it in the tool kit.

1

2

104

MAINTENANCE Clutch System Drive Belt Removal

1. Stop the engine after operat- ing in a forward motion.

2. Turn the ignition key off. Wait for the engine to come to a complete stop.

3. Lock the parking brake. 4. Open the hood and remove

the left side panel. 5. Rotate the driven clutch

counterclockwise 1/4 turn by hand to ensure forward engagement.

6. Locate the L-wrench in the tool kit. Install the wrench into the open threaded hole in the outer sheave of the clutch ( ).

7. Turn the wrench clockwise until the sheaves open far enough to remove the belt. If the wrench does not turn readily, rotate the driven clutch counterclockwise an additional 1/4 turn by hand and try again.

8. Grasp the belt at the lower edge and remove it.

NOTICE

Do not attempt to remove the drive belt after operating in reverse. The snow- mobile must be stopped after forward motion to prevent damage to compo- nents during belt removal. Rotate the driven clutch counterclockwise 1/4 turn by hand to ensure forward engagement before attempting to remove the belt.

105

MAINTENANCE Clutch System Drive Belt Installation 1. Drop the drive belt over the

drive clutch and pull back the slack.

NOTE: To ensure satisfactory belt life, install belts so they operate in the same direction of rotation by positioning the identifica- tion numbers so that you can read them. If required, separate the sheaves as outlined in the belt removal proce- dures.

2. Rotate the L-wrench counterclockwise to tighten the sheaves while working the belt to the outer edge of the sheaves.

3. Remove the L-wrench and store it in the tool kit. 4. Reinstall the side panel. 5. Close and secure the hood.

Torque Stop Periodically check torque stop clearance. With clutches in proper alignment, the torque stop clearance should be .010I- .030I (.25-.75 mm) from the engine case. Adjust if necessary. Lock the jam nut.

.010I-.030I (.25-.75 mm)

106

MAINTENANCE Fall Tune-Up For maximum performance, arrange for a fall service tune-up with your Polaris dealer. His experienced and trained service technician will keep your machine in peak operating condition.

Track Maintenance Track Inspection

1. Using a hoist, safely lift and support the rear of the snow- mobile off the ground.

2. Rotate the track by hand to check for damage.

3. Carefully examine the track along the entire length of each rod ( ). Bend the track to check for breakage.

4. Replace the track if any rod damage is found.

WARNING

Broken track rods can cause a rotating track to come off the machine, which could cause serious injury or death. Never operate with a damaged track. Never rotate a damaged track under power.

107

MAINTENANCE Track Maintenance Track Lubrication

The slide rail needs snow for lubrication. Excessive wear indicates insufficient lubrication. A new rail slide can cause faster heat build-up in limited lubrication, resulting in excessive wear. NOTE: If excessive rail slide wear occurs due to poor snow conditions,

additional wheel kits are available. See your dealer for more information.

NOTE: Track damage or failure caused by operation on ice or under other poor lubrication conditions will void the track warranty.

WARNING

Operating with insufficient lubrication between the rail slide and track guide clips can cause track failure, loss of vehicle control and loss of braking ability, which can result in serious injury or death. Avoid operating for extended peri- ods on ice and other surfaces that have little or no snow for lubrication.

108

MAINTENANCE Track Maintenance

Track Tension Track adjustment is critical for proper handling. Always maintain cor- rect tension and alignment.

NOTE: Tension adjustments should be made only after the track is warmed up and limber.

1. Turn the engine off. 2. Lift the rear of the machine and safely support it off the ground. 3. Place the recommended weight or downward pressure on the track

at the specified distance (see chart) ahead of the center of the rear idler wheel.

NOTE: Measure at the point where the weight is hanging.

WARNING

Moving parts can cut and crush body parts. When performing the checks and adjustments recommended on the following pages, stay clear of all moving parts. Never perform track measurement or adjustments with the engine run- ning.

TRACK TENSION DATA CHART

Suspension Slack Measurement Weight Measurement

Location

IQ 121 7/8"-1 1/8" (2.2-2.9 cm) 10 lbs. (4.54 kg)

16" (40 cm) ahead of rear

idler shaft

109

MAINTENANCE Track Maintenance Track Tension 4. Check for specified slack between the wear surface of the track clip

and the plastic slider. Refer to the Track Tension Data Chart on page 108.

If the track needs adjustment:

5. Loosen the rear idler shaft bolt. 6. Loosen the locknuts.

7. Tighten or loosen the track adjusting screws to provide equal adjust- ment on both sides of the track.

8. Repeat the measurement on the other side of the track. NOTE: Check more frequently when the machine is new.

9. Start the machine and slowly rotate the track at least five revolu- tions. Let the track come to a stop (do not apply brakes).

10. Check track alignment (see page 110) and adjust as necessary. 11. Tighten the locknuts. 12. Tighten the idler shaft bolts. 13. (n) Torque idler shaft bolts to 35 ft. lbs. (47.5 Nm).

Slack Measurement Lock Nut

Adjusting Screw

Track

10 lbs. (4.54 kg)

Shaft Bolt

16I(40 cm)

110

MAINTENANCE Track Maintenance n Track Alignment Periodically check that the track is centered and running evenly on the slide rails. Misalignment will cause excessive wear to the track and slide rail.

1. Safely support the rear of the machine with the track off the ground. 2. Start the engine and apply a small amount of throttle until the track

turns slowly at least five complete revolutions. Stop the engine and let the track come to a stop (do not apply brakes).

3. Inspect track alignment by looking through the track window to make sure the rails ( ) are evenly spaced on each side. If the track runs to the left, loosen the idler shaft bolts, then loosen the left locknut and tighten the left adjusting bolt. If the track runs to the right, loosen the idler shaft bolts, then loosen the right locknut and tighten the right adjusting bolt.

4. After adjustments are com- plete, tighten the locknuts and torque idler shaft bolts to 35 ft. lbs. (47.5 Nm).

5. Repeat steps 2 and 3 to ver- ify proper alignment.

111

MAINTENANCE Steering System Steering Inspection and Adjustment Each week, or before a long ride, check all steering system fasteners and tighten if necessary.

112

MAINTENANCE Steering System Ski Alignment

With the handlebars in a straight ahead position, and with vehicle weight compressing the suspension, measure from the straight edge of the skis at the center of the ski mounting bolt. The measurement between the skis at point X should be 1/8I to 1/4I (3-6 mm) greater than the measurement at point Y. NOTE: If the skis are misaligned, we recommend that your dealer cor-

rect the alignment, since camber adjustment may also be affected.

WARNING

Improper ski alignment or adjustment may cause loss of steering control, resulting in serious injury or death. Do not attempt to change the ski align- ment or camber adjustment. See your Polaris dealer.

10I

X

Y

10I

113

MAINTENANCE Steering System n Ski Skags

Check skags before each use of the snowmobile to ensure positive steer- ing characteristics. Skags must be replaced when worn to half their orig- inal diameter. NOTE: Carbide skags must be replaced if any abnormal wear or chip-

ping is found.

Skag Replacement NOTE: Some models are equipped with single skags. Some models

are equipped with dual skags.

1. Raise and support the front of the machine so the skis are approximately 6I (15.2 cm) from the ground.

2. Remove the attaching nuts and pry the skag downward.

3. Remove the front end of the skag.

4. Remove the rear end of the skag.

5. Reverse the steps to install a skag.

WARNING

Worn skis and/or skags will adversely affect handling. Loss of vehicle control may result, causing serious injury or death.

See your dealer's studding chart for recommended skags. If you install longer or more aggressive carbide skags than the original equipment, it may also be necessary to add track studs to maintain proper vehicle control while turning on hard-packed snow or ice.

Skag

114

MAINTENANCE Steering System n Rail Slide Wear Measure slide thickness at several points along the rail. Have your dealer replace the slide when it's worn down to the top of the wear limit indicator groove ( ). Do not operate the snowmobile if slide thickness measures less than 7/16I (1.1 cm).

Suspension Maintenance n Pre-Ride Suspension Inspection Loose nuts and bolts can reduce your snowmobile's reliability and cause needless repairs and down time. Before beginning any snowmobile trip, a visual inspection will uncover potential problems. Check the follow- ing items on a weekly basis or before any long trip: n Check suspension mounting bolts for tightness. n Check rear idler wheel bolts for tightness. See page 109. n Check rear idler adjusting bolt locknuts for tightness. n Check front torque arm limiter strap condition. n Check rail slide condition. See page 114. n Check track tension. See page 108. n Lubricate all rear suspension components. See page 84. n Check ski runner/skag condition. See page 113. n Check ski spindle bolts for tightness. n Check tie rod end nuts for tightness.

7/16I (1.1 cm)

115

MAINTENANCE Extended Storage Off-season or extended storage of your snowmobile requires preventive measures to aid against deterioration and to prolong the useful life of many components. See page 118 for the part numbers of Polaris prod- ucts.

Cleaning and Preservation Proper storage starts with cleaning, washing, and waxing the hood, chassis, and plastic parts. Wipe down remaining surfaces with a damp cloth. Clean and touch up with paint any rusted or previously painted surfaces. Be sure that corrosive salt and acids are removed from surfaces before beginning preservation with waxes and rust inhibitors (grease, oil or paint).

The machine should be stored in a dry garage or shed, out of direct sun- light, and covered with a fabric snowmobile cover. Plastic tarp may cause condensation to form and damage snowmobile components.

Controls and Linkage Lubricate all bushings and cables as outlined in the Periodic Mainte- nance Table beginning on page 81.

116

MAINTENANCE Extended Storage Bearings Grease the jackshaft and drive shaft clutch side bearings with Polaris Premium All-Season Grease or a similar high quality grease to prevent corrosion.

Clutch and Drive System Remove the drive belt and store in a cool dry location. Do not lubricate clutch components, except the driven clutch shaft bushing as outlined in the Master Repair Manual. See your dealer.

Engine Protection Proper preparation of the engine and fuel system is vital to the preven- tion of rust and corrosion on precision engine parts during storage. Whenever the machine is stored for a period of more than 60 days, the engine must be fogged with fogging oil. Follow the engine fogging instructions provided on the container.

Always add Premium Carbon Clean or a fuel conditioner/stabilizer to the fuel tank. Follow the instructions on the container, running the engine for five minutes to get additives through the entire fuel system. Top off with fresh fuel. Do not allow the snowmobile to run out of fuel.

117

MAINTENANCE Extended Storage Electrical Connections Replace worn or frayed electrical wire and connectors. Be sure wiring harness is properly secured away from sharp edges, steering linkage, moving parts, and hot exhaust parts.

Transporting the Snowmobile Whenever the snowmobile is transported:

1. Be sure the fuel cap and oil cap are installed correctly. 2. Tie the snowmobile to the transporting unit securely using suitable

straps. 3. Remove the ignition key to prevent loss.

Track and Suspension Moderate track tension should be main- tained during summer storage. The machine should be supported off the ground to allow the track to hang freely.

118

POLARIS PRODUCTS Part No. Description

Engine Lubricants

2870791 Fogging Oil (12 oz. Aerosol)

2871098 Premium 2-Cycle Engine Oil (qt.)

2871097 Premium 2-Cycle Engine Oil (gal.)

2871240 Premium 2-Cycle Engine Oil (2.5 gal.)

2871721 Premium Gold Synthetic 2-Cycle Engine Oil (qt.)

2871722 Premium Gold Synthetic 2-Cycle Engine Oil (gal.)

2872347 Premium Gold Synthetic 2-Cycle Engine Oil (2.5 gal.)

2874438 VES II Synthetic 2-Cycle Engine Oil (qt.)

2874439 VES II Synthetic 2-Cycle Engine Oil (gal.)

2874443 VES II Synthetic 2-Cycle Engine Oil (2.5 gal.)

Chaincase Lubricants

2873105 Synthetic Chaincase Lubricant (qt.)

2872951 Synthetic Chaincase Lubricant (12 oz.)

Grease/Specialized Lubricants

2871312 Grease Gun Kit, Premium All Season (3 oz.)

2871322 Premium All Season Grease (3 oz. cartridge)

2871423 Premium All Season Grease (14 oz. cartridge)

2871329 Dielectric Grease (Nyogelt)

Coolant

2871323 Anitfreeze, 60/40 Premix (gal.)

2871534 Anitfreeze, 60/40 Premix (qt.)

Additives/Miscellaneous

2871326 Carbon Clean Plus (12 oz.)

2870652 Fuel Stabilizer (16 oz.)

2872189 DOT 4 Brake Fluid (12 oz.)

2872893 Engine Degreaser (12 oz.)

2870505 Isopropyl

2872889 Brake and Clutch Cleaner

2872890 Carb and Throttle Body Cleaner

119

TROUBLESHOOTING Engine Troubleshooting Unless you have experience and training in two-cycle engine repair, see your dealer if technical problems arise.

Problem Probable Cause Solution

Erratic engine oper- ating RPM during acceleration or load variations

Drive clutch binding SEE YOUR DEALER.

Driven clutch mal- function

SEE YOUR DEALER.

Harsh drive clutch engagement

Drive belt worn or too narrow

Replace the drive belt.

Excessive belt/ sheave clearance

SEE YOUR DEALER.

Drive belt turns over Wrong belt for appli- cation

Replace the drive belt.

Clutch alignment out of spec

SEE YOUR DEALER.

Engine mount bro- ken or loose

Inspect and replace. SEE YOUR DEALER.

Machine fails to move

Clutch jammed Check for twisted belt or broken spring. SEE YOUR DEALER.

Track jammed Foreign object may be caught or the rail slide melted to the track clips due to lack of lubrication.

Track may be iced up or frozen to the ground.

Chaincase sprocket or chain jammed or broken

Chain is loose or broken or chain tightener is loose. SEE YOUR DEALER.

120

TROUBLESHOOTING Engine Troubleshooting Problem Probable Cause Solution

Noise in drive sys- tem

Broken drive clutch components

SEE YOUR DEALER.

Bearing failure/ chaincase, jackshaft, or front drive shaft

SEE YOUR DEALER.

Drive belt surface flat spots

Inspect and replace as needed.

Drive chain loose Inspect and adjust (or replace).

Drive chain worn, sprocket teeth bro- ken

SEE YOUR DEALER.

Poor low RPM per- formance

Worn drive belt Inspect and replace as needed.

Excessive belt/ sheave clearance

SEE YOUR DEALER.

Loose torque stop Inspect and adjust.

Sticky clutch SEE YOUR DEALER.

Poor fuel quality Use 87-91 octane fuel (or higher).

Engine doesn't turn Seized engine SEE YOUR DEALER. Seizure is a result of poor lubrication, inade- quate fuel supply, broken parts or improper cooling.

Hydrostatic lock Fuel may have entered the crankcase while the vehicle was standing or being transported. SEE YOUR DEALER to correct the cause. Drain plug(s) are located on the lower crankcase for emergency draining.

121

TROUBLESHOOTING Engine Troubleshooting Problem Probable Cause Solution

Engine turns but fails to start

Faulty ignition Install new spark plug(s). If engine still fails to start, check for spark. If there's no spark, SEE YOUR DEALER.

No fuel to engine Make sure the fuel valve is on. Make sure the fuel tank contains

fuel. Ice may be in the fuel line, filter or

pump. Add isopropyl alcohol to the fuel system.

Poor engine com- pression

Mixture is too lean. A main jet that is too small will cause seizure result- ing in loss of power. This indicates a major engine problem that must be repaired before operating. SEE YOUR DEALER.

Engine lacks power Fouled or defective spark plug(s)

Replace the plug(s).

Fuel filter (loss of high RPM power)

SEE YOUR DEALER.

Incorrect clutching SEE YOUR DEALER.

Engine continually backfires

Faulty plug(s) Change plug(s).

Fuel System Dirt or ice may be in the fuel system (deicer should be added to non-etha- nol fuel at all times for assurance against fuel line icing).

Incorrect throttle freeplay or faulty switch

SEE YOUR DEALER.

Engine requires more than normal pulls to start

Poor fuel Replace with fresh winter fuel.

Not enough fuel get- ting to engine

SEE YOUR DEALER.

Engine backfires but fails to start

Spark plug wires may be on wrong cylinder

Reinstall spark plug wires to the cor- responding cylinder.

122

TROUBLESHOOTING IQ Rear Suspension Troubleshooting

Problem Solution

Rear suspension bot- toms too easily

Adjust torsion spring preload to achieve proper static sag (see page 48).

Change torsion spring to stiffer optional spring (see your dealer).

Revalve rear track shock (see your dealer).

Rides too stiff in rear Check for binding suspension shafts and grease all pivot points.

Adjust torsion spring preload to achieve proper static sag (see page 48).

Change torsion spring to softer optional spring (see your dealer).

Check track tension (see page 108).

Too much weight transfer when climb- ing

Set static sag (see page 48). Adjust torsion spring blocks or install optional torsion springs to achieve correct sag.

Adjust limiter straps (see page 50).

Too little weight transfer when climb- ing

Set static sag (see page 48). Adjust torsion spring blocks or install optional torsion springs to achieve correct sag.

Adjust limiter straps (see page 50).

Machine darts from side to side

Check ski alignment (see page 112). Make sure spindles and all steering components turn freely. Check for excessive play in steering assembly (see your

dealer). Ensure skags are straight on skis. Set static sag (see page 48). Check rail slide/replace if worn (see page 114). Install Accu-Trak dual skags (see your dealer).

Front end pushes Check for worn skags. Set static sag (see page 48). Check for binding front suspension shafts and steering

components, grease all pivot points (elevate front of machine).

Increase IFS preload (if equipped) (see page 44). Install single skag (see your dealer). Rotate RRSS to high position (see page 53).

Steering is heavy Make sure spindles and all steering components turn freely. Check ski alignment (see page 112). Check skags and skis for damage. Set static sag (see page 48).

123

TROUBLESHOOTING Drive Belt Troubleshooting

Belt Wear/Burn Diagnosis

Causes Solutions

Driving at low RPM Drive at higher RPMs. Gear the machine down. Check belt deflection.

Insufficient warm-up Warm the engine at least five minutes. Take the drive belt off the machine in extremely cold weather and warm it up. Break machine loose from the snow.

Towing at low RPM Do not tow in deep snow. Use fast, aggressive throttle to engage clutch.

Riding with high RPM and slow speed (8000 RPM/10 MPH)

Lower the gear ratio. Reduce RPM. Avoid riding in high ambient temperatures. Check for snow ingestion.

Ice and snow build-up between track and tunnel

Warm the engine at least five minutes. Take the drive belt off the machine in extremely cold weather and warm it up. Break machine loose from the snow.

Poor engine performance Check for carburetor and choke synchronization, fouled plugs, debris in the carburetor(s) and water, ice or dirt in the fuel tank or fuel line.

Loading machines onto trailers

Skis may gouge into trailers and prevent the drivetrain from spinning properly. Use enough speed to drive the machine completely onto the trailer. Push and pull it to finish loading if necessary.

Clutch malfunction Inspect clutch components. See your dealer.

Slow, easy clutch engage- ment

Use fast, aggressive throttle to engage clutch.

124

WARRANTY Service and Warranty Information Obtaining Service and Warranty Assistance Read and understand the service data and the Polaris warranty information con- tained in this manual. Contact your Polaris dealer for replacement parts, service or warranty. Your dealer receives frequent updates on changes, modifications and tips on snowmobile maintenance, which may supersede information con- tained in this manual. Your dealer is also familiar with Polaris policies and pro- cedures and will be happy to assist you. When contacting us about parts, service, or warranty, always provide the fol- lowing information: 1. Serial number 2. Model number 3. Dealer name 4. Date of purchase 5. Details of trouble experienced 6. Length of time and conditions of operation 7. Previous correspondence Use the page provided near the front of your Owner's Manual to record the identification numbers of your snowmobile and its engine. Polaris Customer Service United States: 1-888-704-5290 Canada: 1-204-925-7100

125

WARRANTY Service and Warranty Information Polaris Anti-Theft System The Polaris anti-theft system (PATS) monitoring program is designed to aid owners of registered snowmobiles in recovery of stolen machines.

Administration 1. Polaris snowmobile owner reports theft.

A. In addition to notifying the proper law enforcement officials, the owner must call Polaris Customer Service.

B. Owners must provide their name, address, telephone num- ber and the model and serial number of stolen machines.

2. Polaris warranty will provide all dealerships with a monthly updated list of all stolen units to further monitor thefts.

3. Polaris warranty will aid in notifying the proper owner when a unit is recovered.

126

WARRANTY Limited Warranty Polaris Sales Inc., 2100 Highway 55, Medina, MN 55340, provides a ONE YEAR LIM- ITED WARRANTY on all components of the Polaris snowmobile against defects in material or workmanship. This warranty covers the parts and labor charges for repair or replacement of defective parts that are covered by this warranty. The warranty begins on the date of purchase. This warranty is transferable to another consumer, during the war- ranty period, through a Polaris dealer.

Registration At the time of sale, the Warranty Registration Form must be completed by your dealer and submitted to Polaris within ten days. Upon receipt of this registration, Polaris will record the registration for warranty. No verification of registration will be sent to the purchaser as the copy of the Warranty Registration Form will be the warranty entitle- ment. If you have not signed the original registration and received the customer copy, please contact your dealer immediately. NO WARRANTY COVERAGE WILL BE ALLOWED UNLESS THE SNOWMOBILE IS REGISTERED WITH POLARIS.

Initial dealer preparation and setup of your snowmobile is very important in ensuring trouble-free operation. Purchasing a snowmobile in the crate or without proper dealer setup will void your warranty coverage.

Warranty Coverage and Exclusions Limitations of warranties and remedies This warranty excludes any failures not caused by a defect in material or workmanship. The warranty does not cover accidental damage, normal wear and tear, abuse or improper handling. The warranty also does not cover any snowmobile that has been structurally altered, neglected, improperly maintained, used for racing or used for pur- poses other than for which it was manufactured. The warranty does not cover any dam- ages that occur during trailer transit or as a result of unauthorized service or parts. In addition, this warranty does not cover physical damage to paint or finish, stress cracks, tearing or puncturing of upholstery material, corrosion or defects in parts, components or the snowmobile due to fire, explosions or any other cause beyond Polaris' control.

This warranty does not cover the use of unauthorized lubricants, chemicals, or fuels that are not compatible with the snowmobile.

The exclusive remedy for breach of this warranty shall be, at Polaris' exclusive option, repair or replacement of any defective materials, or components or products. THE REM- EDIES SET FORTH IN THIS WARRANTY ARE THE ONLY REMEDIES AVAIL- ABLE TO ANY PERSON FOR BREACH OF THIS WARRANTY. POLARIS SHALL HAVE NO LIABILITY TO ANY PERSON FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY DESCRIPTION, WHETHER ARISING OUT OF EXPRESS OR IMPLIED WARRANTY OR ANY OTHER CONTRACT, NEGLI- GENCE, OR OTHER TORT OR OTHERWISE. Some states do not permit the exclu- sion or limitation of incidental or consequential damages or implied warranties, so the above limitations or exclusions may not apply to you if inconsistent with controlling state law.

127

WARRANTY Limitations of warranties and remedies ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR- TICULAR PURPOSE) ARE LIMITED IN DURATION TO THE ABOVE ONE YEAR WARRANTY PERIOD. POLARIS FURTHER DISCLAIMS ALL EXPRESS WAR- RANTIES NOT STATED IN THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you if inconsistent with controlling state law.

How to Obtain Warranty Service If your snowmobile requires warranty service, you must take it to a Polaris dealer autho- rized to repair Polaris snowmobiles. When requesting warranty service you must present your copy of the Warranty Registration form to the dealer. (The cost of transportation to and from the dealer is YOUR responsibility). Polaris recommends that you use your original selling dealer; however, you may use any Polaris Servicing Dealer to perform warranty service.

Please work with your dealer to resolve any warranty issues. Your dealer will contact the appropriate personnel at Polaris if additional assistance is needed.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

If any of the above terms are void because of state or federal law, all other warranty terms will remain in effect.

Engine Oil 1. Mixing oil brands or using non-recommended oil may cause engine damage. We rec- ommend the use of Polaris engine oil.

2. Damage resulting from the use of non-recommended lubricants may not be covered by warranty.

128

WARRANTY Conditions and Exclusions In order to qualify for warranty, the product must have been properly set up and tested by a Polaris Dealer (if applicable). Failure of any dealer to perform the required vehicle Pre-Delivery Inspection, perform all applicable service bulletins and have the consumer sign the PDI form prior to delivery may void the warranty. Failure to provide proof of required periodic maintenance upon request may result in denial of warranty coverage. Use of the recommended Polaris products for lubrication and maintenance as directed by the Owner's manual is highly recommended. Should a failure occur during the warranty period resulting from the use of non-recommended products, warranty coverage may be denied.

Warranty does not apply to parts exposed to friction surfaces, stresses, environmental conditions and/or contamination. The following items are excluded from warranty con- sideration if the failure was due to wear or not the direct result of a defect:

Warranty applies to the product only and does not allow for coverage of personal loss. Some items are considered "consumable," meaning they are considered part of normal maintenance or part of completing an effective repair. The following items are excluded from warranty coverage in the event of a warranty claim:

This warranty also excludes failures resulting from improper lubrication; improper engine timing; improper fuel; surface imperfections caused by external stress, heat, cold or contamination; operator error or abuse; improper component alignment, tension, adjustment or altitude compensation; failure due to snow, water, dirt or other foreign substance ingestion/contamination; improper maintenance; modified components; use of aftermarket components resulting in failure; unauthorized repairs; repairs made after the warranty period expires or by an unauthorized repair center; use of the product in competition or for commercial purposes. Warranty will not apply to any product which has been damaged by abuse, accident, fire or any other casualty not determined a defect of materials or workmanship.

Skis Ski wear rods Tracks Slide rails Suspension components Finished and unfinished surfaces Brake components Carburetor/Throttle body components Seat components Engine components Clutches and components Drive belts Steering components Hydraulic components Batteries Circuit breakers/Fuses Light bulbs/Sealed beam lamps Electronic components Idler wheels

Spark Plugs Lubricants such as oil, grease, etc. Filters Batteries (unless defective) Fuel Cosmetic damage/repair Sealants Coolants Hotel fees Meals Towing charges Shipping/ handling fees Mileage Product pick-up/delivery Rentals/Loss of product use Loss of vacation/personal time

129

WARRANTY Polaris Second Year Engine Service Contract Second Year Engine Service Contract is standard on all eligible new and unused snow- mobiles that were Snow Checked through an authorized Polaris dealer during the March/April Snow Check promotion. The free Second Year Engine Service Contract is honored by all authorized Polaris snowmobile dealers in North America and is transfer- able 120 days after the original purchase date, free of charge, through any Polaris snow- mobile dealer. Coverage on Snow Check units is automatic. Although you do not receive a warranty card, your dealership should have printed a copy of the warranty reg- istration form. This form is your proof of warranty.

Consumer Exclusions Each repair visit after the first twelve months of standard warranty coverage is subject

to a $50 deductible. The free Second Year Engine Service Contract applies to the first 5,000 miles or two

(2) calendar years from date of purchase, whichever comes first. Tampering with the odometer shall void all warranties/service contracts. No extensions to coverage under this engine service contract can be given. Used snowmobiles are not eligible under this program.

Snowmobiles used for commercial purposes or for racing are excluded from coverage.

Coverage Coverage for second year engine failures due to defects in materials and workmanship will be determined by Polaris in its sole discretion. Coverage is automatic with no addi- tional paperwork required. The free Second Year Engine Service Contract is subject to a $50 deductible per visit. Regular, documented service maintenance visits are required to validate this warranty.

A partial list of items excluded from coverage includes: Damage due to accident, fire, explosion, theft, or other causes beyond Polaris' control. Damage caused by the failure of other components of the snowmobile. Failures caused by improper fuel or oil. Piston seizures, unless caused by a defective engine component. Failures caused due to improper adjustments. Failure due to unauthorized service. Failures due to lack of service as required in the owner's manual or Polaris updates.

This includes off-season storage as listed in the owner's manual. Failure due to use of unauthorized parts or modifications. Normal wear parts, including but not limited to spark plugs, hoses, batteries, controls,

and recoil ropes are excluded from coverage. Gaskets are covered, as are intake and exhaust manifolds excluding paint coverage.

Electrical coverage is limited to the ECU box, coils, stator plate, and sensors. Wiring and other electrical components are excluded from coverage.

Cooling system coverage is limited to the water pump assembly and components, fan, fan bearings, temperature sensor, gasket and seals.

Non wear related throttle body parts are covered. The fuel pump is covered. Clutches and related clutch parts, including but not limited to, the drive belt, are

excluded from coverage. Electrical components are excluded from coverage. Gearcases and transmissions are excluded from coverage.

130

WARRANTY Exported Vehicles EXCEPT WHERE SPECIFICALLY REQUIRED BY LAW, THERE IS NO WAR- RANTY OR SERVICE BULLETIN COVERAGE ON THIS VEHICLE IF IT IS SOLD OUTSIDE THE COUNTRY OF THE SELLING DEALER'S AUTHORIZED LOCA- TION.

This policy does not apply to vehicles that have received authorization for export from Polaris Industries. Dealers may not give authorization for export. You should consult an authorized dealer to determine this vehicle's warranty or service bulletin coverage if you have any questions.

This policy does not apply to vehicles registered to government officials or military per- sonnel on assignment outside the country of the selling dealer's authorized location.

This policy does not apply to Safety Recalls.

How to Get Service In the Country where your vehicle was purchased:

Warranty or Service Bulletin repairs must be done by an authorized Polaris dealer. If you move or are traveling within the country where your vehicle was purchased, Warranty or Service Bulletin repairs may be requested from any authorized Polaris dealer who sells the same line as your vehicle.

Outside the Country where your vehicle was purchased:

If you are traveling temporarily outside the country where your vehicle was purchased, you should take your vehicle to an authorized Polaris dealer. You must show the dealer photo identification from the country of the selling dealer's authorized location as proof of residence. Upon residence verification, the servicing dealer will be authorized to per- form the warranty repair.

If You Move:

If you move to another country, be sure to contact Polaris Customer Assistance and the customs department of the destination country before you move. Vehicles importation rules vary considerably from country to country. You may be required to present docu- mentation of your move to Polaris Industries in order to continue your warranty cover- age. You may also be required to obtain documentation from Polaris Industries in order to register your vehicle in your new country.

If Purchased From A Private Party:

If you purchase a Polaris product from a private citizen outside of the country in which the vehicle was originally purchased, all warranty coverage will be denied.

Notice If your vehicle is registered outside of the country where it was purchased, and you have not followed the procedure set out above, your vehicle will no longer be eligible for war- ranty or service bulletin coverage of any kind. (Vehicles registered to Government offi- cials or military personnel on assignment outside of the country where the vehicle was purchased will continue to be covered by the basic warranty.)

For questions call Polaris Customer Assistance (see page 124).

131

WARRANTY Snowmobile Engine Emissions Limited Warranty This snowmobile engine emissions limited warranty is in addition to the Polaris stan- dard limited warranty for snowmobiles.

Polaris Industries Inc. warrants that the new engine, including all parts of its emission- control system, is designed, built and equipped so it conforms to current U.S. Environ- mental Protection Agency regulations applicable to snowmobile emissions under 40 CFR1051, 1065 and 1068 at the time of sale to the ultimate purchaser. Polaris warrants that the engine is free from defects in materials and workmanship that may keep it from meeting these regulations.

The warranty period for this emissions certified snowmobile engine starts on the date when the engine is first purchased and continues for 4000 kilometers (2485 miles) of vehicle travel, 200 hours of operation, or 30 calendar months, whichever comes first.

This engine emissions limited warranty covers the parts and labor charges for repair or replacement of defective parts that are covered by this warranty. This includes compo- nents whose failure increases the snowmobile engine's emissions. To the extent they are present on your snowmobile engine, this includes electronic controls, fuel injection components, exhaust gas recirculation system components, and aftertreatment system components. Replacing or repairing other components not covered by this warranty is the responsibility of the snowmobile owner.

The exclusive remedy for breach of this limited warranty shall be, at the exclusive option of Polaris, repair or replacement of any defective materials, components or prod- ucts. THE REMEDIES SET FORTH IN THIS LIMITED WARRANTY ARE THE ONLY REMEDIES AVAILABLE TO ANY PERSON FOR BREACH OF THIS WAR- RANTY. POLARIS SHALL HAVE NO LIABILITY TO ANY PERSON FOR INCI- DENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY DESCRIPTION,WHETHER ARISING OUT OF EXPRESS OR IMPLIED WAR- RANTY OR ANY OTHER CONTRACT, NEGLIGENCE OR OTHER TORT OR OTHERWISE. ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO THE WARRANTY PERIOD DESCRIBED HEREIN. POLARIS DISCLAIMS ALL EXPRESS WARRAN- TIES NOT STATED IN THIS WARRANTY.

132

WARRANTY Snowmobile Engine Emissions Limited Warranty Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply if it is inconsistent with the controlling state law. This limited warranty excludes failures not caused by a defect in material or workmanship. This lim- ited warranty does not cover damage due to accidents, abuse or improper handling, maintenance or use. This limited warranty also does not cover any engine that has been structurally altered, or any engine that has been used in racing competition. This limited warranty also does not cover physical damage, corrosion or defects caused by fire, explosions or other similar causes beyond the control of Polaris.

Owners are responsible for performing the scheduled maintenance identified in the owner's manual. Polaris can deny an emissions warranty claim if any specified critical emissions-related maintenance is not performed. Performance of other scheduled main- tenance is strongly recommended, but is not necessary to keep the emissions-related warranty valid. Any qualified repair shop or qualified person may maintain, replace, or repair the emission control devices or systems on your snowmobile. Polaris recom- mends that you contact an authorized Polaris dealer to perform any service that may be necessary.

It is a potential violation of the Clean Air Act if a part supplied by an aftermarket parts manufacturer reduces the effectiveness of the vehicle's emission controls. Tampering with emission controls is prohibited by federal law and may result in civil penalties.

133

MAINTENANCE LOG Present this section of your manual to your dealer each time your snow- mobile is serviced. This will provide you and future owners with an accurate log of maintenance and services performed on the snowmobile.

DATE MILES (KM)

TECHNICIAN SERVICE PERFORMED / COMMENTS

150 mi. (240 km)

500 mi. (800 km)

1000 mi. (1600 km)

2000 mi. (3200 km)

134

MAINTENANCE LOG

DATE MILES (KM)

TECHNICIAN SERVICE PERFORMED / COMMENTS

135

MAINTENANCE LOG

DATE MILES (KM)

TECHNICIAN SERVICE PERFORMED / COMMENTS

136

INDEX A

Accessories . . . . . . . . . . . . . . . . . . . 55 Adjustable Headlights . . . . . . . . . . . 29 Air Pollution . . . . . . . . . . . . . . . . . . . 6 Avalanches. . . . . . . . . . . . . . . . . . . . 15

B Bearings . . . . . . . . . . . . . . . . . . . . . 116 Brake Components. . . . . . . . . . . . . . 96 Brake Fluid . . . . . . . . . . . . . . . . . . . 97 Brake Inspection . . . . . . . . . . . . . . . 96 Brake Lever Travel . . . . . . . . . . 60, 96 Brake System Bleeding . . . . . . . . . . 98 Brakelight Replacement. . . . . . . . . 100 Brakes . . . . . . . . . . . . . . . . . . 60, 96-98

C Carbide Skags . . . . . . . . . . . . . . . . . 57 Cargo Area. . . . . . . . . . . . . . . . . . . . 29 Chaincase Oil. . . . . . . . . . . . . . . . 85-86 Cleaning and Preservation . . . . . . . 115 Clutch Alignment Offset . . . . . . . . 101 Clutch and Drive System. . . . . . . . 116 Clutch Center Distance . . . . . . . . . 101 Clutch Cover Warning. . . . . . . . . . . 23 Clutch Safety . . . . . . . . . . . . . . . . . . 19 Clutch System . . . . . . . . . . . . . 101-105 Cold Weather Drive-Away . . . . . . . 19 Controls and Linkage. . . . . . . . . . . 115 Coolant. . . . . . . . . . . . . . . . . . . . . . . 91 Coolant Level. . . . . . . . . . . . . . . . . . 91 Cooling System . . . . . . . . . . . . . . 91-93 Cooling System, Bleeding . . . . . . . . 93 Cooling System, Flushing . . . . . . . . 92 Customer Service. . . . . . . . . . . . . . 124

D DET. . . . . . . . . . . . . . . . . . . . . . . . . . 30 Detonation Elimination Technology . 30 Digital Display . . . . . . . . . . . . . . . . . 31 Disabled Operators . . . . . . . . . . . . . . 12 Drive Belt . . . . . . . . . . . . . . . . . . . . . 19 Drive Belt Adjustment . . . . . . . . . . 103 Drive Belt Condition . . . . . . . . . . . . 102 Drive Belt Deflection . . . . . . . . . . . 103 Drive Belt Installation . . . . . . . . . . . 105 Drive Belt Removal. . . . . . . . . . . . . 104 Drive Chain Tension . . . . . . . . . . . . . 95 Driver Awareness . . . . . . . . . . . . . . . 14 Driveshaft Bearing . . . . . . . . . . . . . . 84 Driving Downhill . . . . . . . . . . . . . . . 17 Driving in Hilly Terrain . . . . . . . . . . 18 Driving on Slippery Surfaces . . . . . . 16 Driving Responsibly . . . . . . . . . . . . . 21

E Electrical Connections . . . . . . . . . . 117 Engine Break-In . . . . . . . . . . . . . 66-67 Engine Protection . . . . . . . . . . . . . . 116 Engine Safety . . . . . . . . . . . . . . . . . . 10 Engine Stop Switch . . . . . . . . . . . . . . 72 Environment . . . . . . . . . . . . . . . . . . . . 6 Exhaust System . . . . . . . . . . . . . . . . . 94

F Front Rear Scissor Stop. . . . . . . . . . . 51 Front Suspension Adjustments . . 43-45 Front To Rear Coupling . . . . . . . . . . 51 FRSS . . . . . . . . . . . . . . . . . . . . . . . . . 51 Fuel . . . . . . . . . . . . . . . . . . . . . . . 69-70 Fuel Filter . . . . . . . . . . . . . . . . . . . . . 90 Fuel Lines . . . . . . . . . . . . . . . . . . . . . 90 Fuel Pump . . . . . . . . . . . . . . . . . . . . . 90 Fuel System Deicers . . . . . . . . . . . . . 70

137

INDEX G

Gauge Cleaning. . . . . . . . . . . . . . . . . 42

H Handlebar Adjustments. . . . . . . . . . . 54 Handlebar Angle . . . . . . . . . . . . . . . . 54 Handlebar Position . . . . . . . . . . . . . . 54 Headlight Adjustment . . . . . . . . . . . . 29 Headlight Bulb Installation . . . . . . . 100 Headlight Bulb Removal . . . . . . . . . 99 High Temperature Light . . . . . . . . . . 92 Hood Latches . . . . . . . . . . . . . . . . . . 63 Hot Surface Warning . . . . . . . . . . . . 24

I Ice and Snow Build-up . . . . . . . . . . . 16 IFS. . . . . . . . . . . . . . . . . . . . . . . . . . . 43 IFS Adjustment Options . . . . . . . . . . 43 IFS Components . . . . . . . . . . . . . . . . 43 Inadequate Snow Conditions . . . . . . 20 Instrumentation . . . . . . . . . . . . . . 31-42 Intake Filters . . . . . . . . . . . . . . . . . . . 90 Intake Silencer . . . . . . . . . . . . . . . . . 19

L Lights . . . . . . . . . . . . . . . . . . . . 99-100 Limiter Strap Position. . . . . . . . . . . . 50 Low Oil Indicator Light . . . . . . . . . . 71 Lubrication . . . . . . . . . . . . . . . . . 84-86

M Maintenance Interval Table . . . . 81-83 Maintenance Program . . . . . . . . . . . . 80 Maneuverability . . . . . . . . . . . . . . . . 19 MFD Battery Replacement . . . . . 41-42 MFD Components. . . . . . . . . . . . . . . 31 MFD Digital Display Programs . 34-40 MFD Settings . . . . . . . . . . . . . . . 32-33

N Noise. . . . . . . . . . . . . . . . . . . . . . . . . . 6

O Oil Filter . . . . . . . . . . . . . . . . . . . . . . 89 Oil Indicator Light . . . . . . . . . . . . . . 71 Oil Injection System. . . . . . . . . . . . . 67 Oil Level. . . . . . . . . . . . . . . . . . . . . . 71 Oil Lines . . . . . . . . . . . . . . . . . . . . . . 89 Oil Recommendations . . . . . . . . . . . 67 Operation Warning . . . . . . . . . . . 25-26 Operator Safety. . . . . . . . . . . . . . . 8-22

P Parking Brake Lever Lock . . . . . . . . 61 Passenger Warnings . . . . . . . . . . . . . 24 Preload, IFS Shock Spring . . . . . . . . 44 Pre-Ride Checklist . . . . . . . . . . . . . . 58 Pre-Ride Suspension Inspection. . . 114 Pressure Cap Warning . . . . . . . . . . . 23

R Rail Slide Wear . . . . . . . . . . . . . . . 114 Rear Rear Scissor Stop . . . . . . . . . . . 52 Rear Suspension Adjustments . . 46-47 Rear To Front Coupling . . . . . . . . . . 52 Recoil Rope . . . . . . . . . . . . . . . . . . . 63 Recommended Maintenance . . . . . . . 9 Registration, Warranty . . . . . . . . . . 126 Reverse . . . . . . . . . . . . . . . . . . . . 75-76 Reverse Warning . . . . . . . . . . . . . . . 25 Rider Capacity . . . . . . . . . . . . . . . . . 13 Riding Apparel . . . . . . . . . . . . . . . . . 11 Riding Position . . . . . . . . . . . . . . . . . 10 RRSS . . . . . . . . . . . . . . . . . . . . . . . . 52

138

INDEX S

Safety Decals . . . . . . . . . . . . . . . . 23-26 Safety Symbols . . . . . . . . . . . . . . . . . 8 Sag . . . . . . . . . . . . . . . . . . . . . . . . 48-49 Shock Valving, IFS . . . . . . . . . . . . . 45 Signal Words . . . . . . . . . . . . . . . . . . . 8 Ski Alignment . . . . . . . . . . . . . . . . 112 Ski Pressure . . . . . . . . . . . . . . . . . . . 50 Ski Skags . . . . . . . . . . . . . . . . . . . . 113 Slide Rail and Track Cooling . . . . . 67 Snow Conditions . . . . . . . . . . . . . . . 20 Spark Plug Condition. . . . . . . . . . . . 88 Spark Plug Removal . . . . . . . . . . . . 89 Spark Plugs . . . . . . . . . . . . . . . . . . . 87 Speed . . . . . . . . . . . . . . . . . . . . . . . . 13 Spring Preload, IFS Shock. . . . . . . . 44 Spring Preload, Rear . . . . . . . . . . 48-49 Starting the Engine . . . . . . . . . . . . . 65 Steering Inspection/Adjustment. . . 111 Steering System . . . . . . . . . 62, 111-114 Stopping, Emergency. . . . . . . . . . . . 74 Storage, Daily . . . . . . . . . . . . . . . . . 77 Storage, Extended . . . . . . . . . . 115-117 Studs . . . . . . . . . . . . . . . . . . . . . . . . 56 Survival Preparation . . . . . . . . . . . . 12 Suspension Adjustments, Rear . . 48-53 Suspension Coupling, IQ. . . . . . . . . 51 Suspension Inspection, Pre-Ride . . 114 Suspension Maintenance . . . . . . . . 114 Suspension Performance Tips . . . . . 47 Suspension, Rear, Lubrication. . . . . 84

T Taillight/Brakelight Replacement . . 100 Throttle Cable . . . . . . . . . . . . . . . . . . 85 Throttle Lever . . . . . . . . . . . . . . . 59, 73 Throttle Safety Switch. . . . . . . . . 59, 72 Torque Stop. . . . . . . . . . . . . . . . . . . 105 Torsion Spring Preload, IQ . . . . . . . . 50 Towing . . . . . . . . . . . . . . . . . . . . . . . 77 Track . . . . . . . . . . . . . . . . . . . . . . . . . 62 Track Alignment . . . . . . . . . . . . . . . 110 Track Care for Storage . . . . . . . . . . 117 Track Inspection . . . . . . . . . . . . . . . 106 Track Lubrication . . . . . . . . . . . . . . 107 Track Maintenance . . . . . . . . . 106-110 Track Safety . . . . . . . . . . . . . . . . . . . 10 Track Tension . . . . . . . . . . 47, 108-109 Track Warm-Up . . . . . . . . . . . . . . . . 68 Track Warning . . . . . . . . . . . . . . . . . 24 Traction Products . . . . . . . . . . . . 56-57 Transporting the Snowmobile . . . . . 117 Troubleshooting, Drive Belt . . . . . . 123 Troubleshooting, Engine . . . . . 119-121 Troubleshooting, Rear Suspension . 122 Tune-Up . . . . . . . . . . . . . . . . . . . . . 106

V Vehicle Identification Numbers . . . . . 5

W Wear Strips . . . . . . . . . . . . . . .

Manualsnet FAQs

If you want to find out how the 800 IQ Polaris works, you can view and download the Polaris 800 IQ Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Polaris 800 IQ as well as other Polaris manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Polaris 800 IQ. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Polaris 800 IQ Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Polaris 800 IQ Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Polaris 800 IQ Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Polaris 800 IQ Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Polaris 800 IQ Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.