6 Smart TV
Press the SMART TV button on the remote control.
To navigate around the Smart TV screen
A red box will highlight the area of the screen that is currently selected. Press the buttons to move around the screen.
Press the OK button to select an app.
To exit Smart TV and return back to normal TV press the TV button, or select the TV picture on the Smart screen and press OK.
To surf the internet
Select the brows n app. A keyboard will appear on the screen. Press the buttons to select the letters and press OK to confirm.
When the page loads, brows the page using the and OK button.
To scroll up and down a page press the P +/- button.
To exit a web page and return to the main Smart screen press twice. The first press will take you back to the keyboard, the second press will take you back to the SMART screen.
Please be patient it may take a minute or two for the Smart page to load. The smart symbol will be animated while smart pages are loading.
For more instructions on how to use the Smart function of your TV please refer to your instruction CD.
5 Initial setup
Press the STANDBY button to switch the TV on. Please be patient this may take a few second.
To setup the internet and tune in you TV follow the on screen menus. For detailed instructions please refer to your instruction book on the CD provided.
To confirm a selection press the button.
To select menu items press the buttons.
The Initial Setup will take a few minutes, please be patient.
If you have a digital cable box that connects via a HDMI cable, skip the tuning section, you do not need to tune in your TV. You just need to select the HDMI source to view digital cable channels.
Recommendations - Internet connection:
Connect your TV via an Ethernet cable.
Recommendations - Tuning in TV stations:
If you receive your TV via an aerial choose the Antenna option.
If you have cable box connected by an RF cable to your TV, choose the Cable option.
Your TV is a Smart TV. To use Smart you will have to be connected to the internet. To enjoy Smart functionality you will need a fast broadband connection, you may need to check your speed with your internet provider. In Smart mode you can search the internet or browse the pre-installed apps.
7 3D Glasses
Unpacking the glasses
Inserting the batteries
Pairing the 3D glasses Using the 3D glasses
Connecting the arms
Gently push each arm into the main body of the glasses as shown below.
1
2
3
4
1. 3D glasses frame x2
2. Right arm x2
3. Left arm x2
4. Battery (CR2025) x2
1. Slide the battery compartment up.
2. Open the battery compartment.
3. Insert the supplied battery (CR2025) making sure that the + symbol is facing down.
4. Close the battery compartment.
5. Slide the battery compartment closed.
You will need to pair your 3D glasses with your TV when you want to view your TV in 3D mode. The glasses will only work when your TV is in 3D mode.
1. Turn you TV on, then press the 3D button on your TV remote control to switch your TV into 3D mode.
2. Make sure you are within 1m of the TV then press and hold the STANDBY button on the 3D glasses for 6 seconds. The button will flash red. When the glasses are connected the message Connection established between TV and 3D glasses. You should notice the lenses change shade.
TV in 3D mode Press & hold for 6 seconds
Within 1m
Connection established between TV and 3D glasses
Your 3D glasses have 3 modes - Normal 3D mode, Right eye mode and Left eye mode. Right and left eye modes are for when you are gaming in a split screen mode.
1. Press and hold the STANDBY button for 6 seconds to switch the 3D glasses on.
2. To switch the glasses back into standby press and hold the STANDBY button for 6 seconds. Your 3D glasses will also go into standby 30 seconds after you switch 3D mode off on your TV.
Make sure the TV is in 3D mode and all other TVs close to the glasses are switched off b