Contents

Philips HD4711/64 HD4711 Rice Cooker User Manual PDF

1 of 32
1 of 32

Summary of Content for Philips HD4711/64 HD4711 Rice Cooker User Manual PDF

HD4718, HD4715, HD4711

B

A

C

D

E

F

G

H

I

J

K P

O

N

M

L

1

H D

47 18

, H D

47 15

, H D

47 11

EnglisH 6 Franais 11

1 6

6

introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

general description (Fig. 1) A Steam vent B Lid handle C Glass lid D Steam tray E Water level indication F Inner pot G Body H Keep-warm light I Cook light J Control lever K Heating element L Measuring cup M Rice scoop N Side handle O Mains cord connection P Mains cord

important Read this user manual carefully before you use the appliance and save it for future reference.

Danger Never immerse the housing of the rice cooker in water, nor rinse it under the tap.

Warning Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance. Only connect the appliance to an earthed wall socket. Always make sure that the plug is inserted firmly into the wall socket. Do not use the appliance if the plug, the mains cord or the appliance itself is damaged. If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Keep the mains cord out of the reach of children. Do not let the mains cord hang over the edge of the table or worktop on which the appliance stands. Make sure the heating element, the magnetic switch and the outside of the inner pot are clean and dry before you put the plug in the wall socket. Do not cover the steam vent and the lid while the rice cooker is operating. Do not plug in the appliance or operate the control lever with wet hands.

Caution Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid. Only use the rice scoop provided. Avoid using sharp utensils.

-

-

-

- -

-

- -

-

- -

-

-

EnglisH

Do not expose the rice cooker to high temperatures, nor place it on a working or still hot stove or cooker. Always insert the inner pot before you put the plug in the wall socket. Always unplug the rice cooker and let it cool down before you clean it. Do not place the inner pot directly over an open fire to cook rice. This appliance is intended for household use only. If the appliance is used improperly or for professional or semi-professional purposes or if it is not used according to the instructions in this user manual, the guarantee becomes invalid and Philips refuses liability for any damage caused. Place the rice cooker on a stable, horizontal and level surface. The accessible surfaces may become hot when the appliance is in operation. Beware of hot steam coming out of the steam vent during cooking or out of the rice cooker when you open the lid. Always unplug the appliance after use. Do not lift and move the rice cooker by its handles while it is operating.

Electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

Before first use 1 Remove the sheet between the inner pot and the heating element. Cleanthepartsofthericecookerthoroughlybeforeyouusetheapplianceforthefirsttime

(see chapter Cleaning). Make sure all parts are completely dry before you start using the appliance.

Using the appliance Cooking rice

1 Measure the rice with the measuring cup provided. Each cup of uncooked rice normally gives 2 bowls of cooked rice. Do not exceed the quantities indicated on the inside of the inner pot. 1 cup of rice is approx. 180ml. See the table below.

Menu Volume (L) Quantity of rice (cups)

HD4711 1.0 1-5

HD4715 1.8 2-10

HD4718 2.8 5-15

1 Wash the rice thoroughly. Use a separate container to wash the rice to avoid damaging the surface of the inner pot.

Put the pre-washed rice in the inner pot. Add water to the level indicated on the scale inside the inner pot that corresponds to the

number of cups of rice used. Then smooth the rice surface. For instance, if you cook 4 cups of rice, add water up to the 4-cup level indicated on the scale.

HD4711 (Fig. 2) HD4715 (Fig. 3) HD4718 (Fig. 4)

-

- - - -

- - -

- -

- - -

EnglisH

Note: The level marked inside the inner pot is just an indication. You can always adjust the water level for different types of rice and your own preference. Put the inner pot in the rice cooker. (Fig. 5)

Make sure the inner pot is in proper contact with the heating element. To achieve this, turn the inner pot slightly to the left and right a few times inside the rice cooker. Make sure that the outside of the inner pot is dry and clean. Also make sure that there is no foreign residue on the heating element or the magnetic switch.

5 Put the lid on the rice cooker and put the plug in the wall socket. The keep-warm light goes on to indicate that the appliance is on. (Fig. 6)

6 Press the control lever down to start the cooking process (Fig. ). The cook light goes on (Fig. 8).

If you fail to press down the control lever, the keep-warm light stays on. Whenthecookingprocessisfinished,thecooklightgoesoutandthekeep-warmlightgoes on to indicate that the rice cooker has automatically switched to the keep-warm mode (Fig. 6).

Open the lid and stir the rice to loosen it (Fig. 9). For the best results, do this just after the rice cooker has switched to the keep-warm mode. Then close the lid firmly. Stirring the rice allows excess steam to escape. This gives fluffier rice.

8 Toendthecookingprocess,pullupthecontrolleverandremovethemainsplugfromthe wallsocket.Toendthekeep-warmmode,removethemainsplugfromthewallsocket. steaming

1 Measure cups of water with the measuring cup and pour it into the inner pot. The amount of water varies based on to the quantity of food to be steamed. It takes approx. 8 minutes for 3 cups of water to come to the boil.

Make sure that the inner pot is in proper contact with the heating element. To achieve this, turn the inner pot slightly to the left and right a few times inside the rice cooker. Make sure that the outside of the inner pot is dry and clean. Also make sure that there is no foreign residue on the heating element or the magnetic switch.

Put the food to be steamed on a plate or in the steam tray. To ensure even steaming, spread out the food evenly and do not pile it up.

Put the steam tray in the inner pot (Fig. 10). When you cook rice and steam food at the same time, make sure you measure out an amount of rice that leaves enough room for the steam tray. The steamed food is ready when the rice cooking process is finished.

Ifyouuseaseparateplate,putitinthesteamtray. 5 Closethelidfirmly. 6 Followsteps6,7and8insectionCookingrice The steaming time varies based on the quantity of food to be steamed. When the steaming process is finished, the cook light goes out and the keep-warm light goes on to indicate that the appliance has automatically switched to the keep-warm mode.

Toendthecookingprocess,pullupthecontrolleverandremovethemainsplugfromthe wallsocket.Toendthekeep-warmmode,removethemainsplugfromthewallsocket.

8 Open the lid and carefully remove the steamed food from the plate or steam tray. Use a kitchengloveoracloth,astheplateandthesteamtrayareveryhot.

Beware of the hot steam.

-

-

,

,

,

-

-

EnglisH8

Keeping warm This mode allows you to keep your rice warm for a longer period of time.

Whenthecookingprocessisfinished,thericecookerautomaticallyswitchestothekeep- warm mode. The cook light goes out and the keep-warm light goes on.

We advise you not to keep rice warm for more than 5 hours, to preserve its taste. The keep-warm mode does not switch off automatically. To end the keep-warm mode, remove the mains plug from the wall socket.

Cleaning Unplug the rice cooker before you clean it. Waituntilthericecookerhascooleddownsufficientlybeforeyoucleanit. To protect the surface of the inner pot, do not:

use the inner pot for washing dishes; put vinegar in the pot.

1 Take the steam tray and the inner pot out of the body of the appliance. Cleanthelid,innerpot,steamtrayandricescoopwithaspongeoraclothinhotwaterwith

some washing-up liquid. Donotuseabrasivecleaningagents,scourersormetalutensilstocleantheinnerpot,as they damage the surface of the inner pot. Use only a damp cloth to wipe the outside and inside of the body of the rice cooker. Neverimmersethebodyofthericecookerinwater,norrinseitunderthetap.Wipetheheating element with a dry cloth.

Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 11).

guarantee & service If you need service or information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer.

Troubleshooting If your rice cooker does not function properly or if the quality of the cooked food is insufficient, consult the table below. If you are unable to solve the problem, please contact the Philips Consumer Care Centre in your country.

Problem Cause Solution

The cook light does not go on.

There is a connection problem.

Check if the rice cooker is connected to the mains and if the plug is inserted firmly into the wall socket.

The light is defective. Take the appliance to your Philips dealer or a service centre authorised by Philips.

,

- -

-

EnglisH 9

Problem Cause Solution

The keep-warm light does not go on when the cooking process is finished.

The light is defective. Take the appliance to your Philips dealer or a service centre authorised by Philips.

Water spills out of the appliance during rice cooking.

You added too much water to the rice.

Make sure that you add water to the level indicated on the scale inside the inner pot that corresponds to the number of cups of rice used. Make sure the water does not exceed the next level on the scale, as this may cause the appliance to overflow during cooking.

The rice is not cooked.

Not enough water has been added.

Add water according to the scale on the inside of the inner pot (see chapter Using the appliance).

The cooking process has not started.

You have failed to press down the control lever.

The inner pot is not properly in contact with the heating element.

Make sure that there is no foreign residue on the heating element.

The heating element is damaged.

Take the appliance to your Philips dealer or a service centre authorised by Philips.

The cooked rice is too hard.

You did not add enough water to the rice.

Add slightly more water than indicated by the level on the scale inside the inner pot that corresponds to the number of cups of rice used. Make sure the water does not exceed the next level on the scale, as this may cause the appliance to overflow during cooking.

The cooked rice is too soft.

You added too much water to the rice.

Make sure you add water according to the scale on the inside of the inner pot (see chapter Using the appliance).

The rice is scorched.

The rice has not been rinsed well.

Rinse the rice until water runs clear.

The rice cooker does not automatically switch to the keep-warm mode.

The temperature control is defective.

Take the appliance to your Philips dealer or a service centre authorised by Philips.

The food has not been steamed properly.

There is too much food in the steam tray.

Distribute the food evenly and do not steam too much food at one time.

EnglisH10

11

introduction Flicitations pour votre achat et bienvenue dans lunivers Philips ! Pour profiter pleinement de lassistance Philips, enregistrez vos produits sur le site ladresse suivante : www.philips.com/ welcome.

Description gnrale (fig. 1) A vents vapeur B Poigne du couvercle C Couvercle en verre D Plateau de cuisson la vapeur E Indication de niveau deau F Cuve G Corps H Voyant de maintien au chaud I Voyant de cuisson J Manette K lment chauffant L Mesure gradue M Cuillre riz N Poigne latrale O Branchement du cordon dalimentation P Cordon dalimentation

important Lisez attentivement ce mode demploi avant dutiliser lappareil et conservez-le pour un usage ultrieur.

Danger Ne plongez jamais le corps du cuiseur riz dans leau et ne le rincez pas sous le robinet.

avertissement Avant de brancher lappareil, vrifiez que la tension indique sur lappareil correspond la tension secteur locale. Branchez lappareil sur une prise de terre. Assurez-vous que la fiche est correctement insre dans la prise. Nutilisez jamais lappareil si la fiche, le cordon dalimentation ou lappareil lui-mme est endommag. Si le cordon dalimentation est endommag, il doit tre remplac par Philips, un Centre Service Agr ou des techniciens qualifis agrs afin dviter tout accident. Cet appareil nest pas destin tre utilis par des personnes (notamment des enfants) dont les capacits physiques, sensorielles ou intellectuelles sont rduites, ou par des personnes manquant dexprience ou de connaissances, moins que celles-ci ne soient sous surveillance ou quelles aient reu des instructions quant lutilisation de lappareil par une personne responsable de leur scurit. Veillez ce que les enfants ne puissent pas jouer avec lappareil. Maintenez le cordon dalimentation hors de porte des enfants. Ne le laissez pas dpasser de la table ou du plan de travail sur lequel lappareil est pos. Assurez-vous que llment chauffant, linterrupteur magntique et lextrieur de la cuve sont bien propres et secs avant de brancher lappareil sur la prise secteur. Ne couvrez pas les vents vapeur et le couvercle lorsque le cuiseur riz est en cours de fonctionnement. Ne branchez pas lappareil et ne touchez pas la manette avec des mains humides.

-

-

-

-

-

-

- -

-

-

-

Franais

attention Nutilisez jamais daccessoires, ni de pices dautres fabricants ou qui nont pas t spcifiquement recommands par Philips. Votre garantie ne sera pas valable en cas dutilisation de tels accessoires ou pices. Utilisez uniquement la cuillre riz fournie. Nutilisez pas dustensile pointu. Nexposez pas le cuiseur riz des tempratures leves, ne le placez pas sur une plaque chauffante ou une cuisinire en cours de fonctionnement ou encore chaude. Insrez toujours la cuve avant de brancher lappareil sur la prise secteur. Dbranchez toujours le cuiseur riz et laissez-le refroidir avant de le nettoyer. Ne placez jamais la cuve directement sur une flamme pour cuire du riz. Cet appareil est destin un usage domestique uniquement. Sil est employ de manire inapproprie, des fins professionnelles ou semi-professionnelles, ou en non-conformit avec les instructions de ce mode demploi, la garantie peut tre caduque et Philips dcline toute responsabilit concernant les dgts occasionns. Placez le cuiseur riz sur une surface stable, horizontale et plane. En cours de fonctionnement, les surfaces accessibles peuvent devenir trs chaudes. Faites attention la vapeur brlante schappant des vents vapeur pendant la cuisson et la vapeur schappant du cuiseur riz lorsque vous ouvrez le couvercle. Dbranchez toujours lappareil aprs utilisation. Ne soulevez pas et ne dplacez pas le cuiseur riz par ses poignes lorsque celui-ci est en cours de fonctionnement.

Champs lectromagntiques (CEM) Cet appareil Philips est conforme toutes les normes relatives aux champs lectromagntiques (CEM). Il rpond aux rgles de scurit tablies sur la base des connaissances scientifiques actuelles sil est manipul correctement et conformment aux instructions de ce mode demploi.

avant la premire utilisation 1 Retirez la plaque entre la cuve et llment chauffant. Nettoyez les lments du cuiseur riz soigneusement avant la premire utilisation (voir la

section Nettoyage ). Schez bien tous les lments avant dutiliser lappareil.

Utilisation de lappareil Cuisson du riz

1 Mesurez le riz laide de la mesure gradue fournie. Pour chaque tasse de riz non cuit vous obtenez 2 bols de riz cuit. Ne dpassez pas les quantits indiques lintrieur de la cuve. 1 tasse de riz reprsente environ 180 ml. Reportez-vous au tableau ci-aprs.

Menu Volume (L) Quantit de riz (en nombre de tasses)

HD4711 1 1 5

HD4715 1,8 2 10

HD4718 2,8 5 15

1 Lavez le riz grande eau. Utilisez un autre rcipient pour laver le riz afin dviter dendommager la surface de la cuve.

Placez le riz lav dans la cuve.

-

- -

- - - -

- - -

- -

Franais1

Ajoutez de leau jusquau niveau correspondant au nombre de tasses de riz utilises. talez uniformment le riz.

Par exemple, si vous cuisez 4 tasses de riz, ajoutez de leau jusquau niveau correspondant 4 tasses. HD4711 (fig. 2) HD4715 (fig. 3) HD4718 (fig. 4)

Remarque : Le niveau indiqu lintrieur de la cuve est une simple indication ; vous pouvez adapter le niveau deau selon les diffrentes varits de riz et selon vos prfrences. Placezlacuvedanslecuiseurriz.(fig.5)

Assurez-vous que la cuve est directement en contact avec llment chauffant. Tournez plusieurs fois la cuve lgrement vers la gauche et la droite lintrieur du cuiseur riz pour vous en assurer. Assurez-vous que lextrieur de la cuve est bien sec et propre. Veillez ce quil ny ait aucun rsidu sur llment chauffant ou sur linterrupteur magntique.

5 Placez le couvercle sur le cuiseur riz et branchez le cordon dalimentation sur la prise secteur. Levoyantdemaintienauchaudsallumepourindiquerquelappareilfonctionne.(fig.6)

6 Abaissezlamanettepourcommencerlacuisson(fig.7). Levoyantdecuissonsallume(fig.8).

Si vous nabaissez pas la manette, le voyant de maintien au chaud reste allum. Lorsquelacuissonesttermine,levoyantdecuissonsteintetlevoyantdemaintienau chaudsallume,cequiindiquequelecuiseurrizpasseautomatiquementenmodede maintienauchaud(fig.6).

Ouvrezlecouvercleetremuezlerizpourledcoller(fig.9). Pour obtenir les meilleurs rsultats, attendez que le cuiseur riz passe en mode de maintien au chaud. Refermez correctement le couvercle. Lorsque vous remuez le riz, de la vapeur supplmentaire schappe. Le riz sera ainsi plus lger.

8 Pourterminerlacuisson,tirezlamanetteverslehautetdbranchezlecordon dalimentationdelaprisesecteur.Pourarrterlemodedemaintienauchaud,dbranchezle cordon dalimentation de la prise secteur. Cuisson la vapeur

1 Mesurez tasses deau avec la mesure gradue et versez-les dans la cuve. La quantit deau dpend de la quantit daliments cuire la vapeur. Il faut environ 8 minutes pour obtenir 3 tasses deau bullition.

Assurez-vous que la cuve est directement en contact avec llment chauffant. Tournez plusieurs fois la cuve lgrement vers la gauche et la droite lintrieur du cuiseur riz pour vous en assurer. Assurez-vous que lextrieur de la cuve est bien sec et propre. Veillez ce quil ny ait aucun rsidu sur llment chauffant ou sur linterrupteur magntique.

Mettez les aliments cuire la vapeur sur une assiette ou sur le plateau. Pour une cuisson la vapeur optimale, rpartissez les aliments uniformment sur le plateau.

Placezleplateaudecuissonlavapeurdanslacuve(fig.10). Lorsque vous faites cuire du riz et des aliments la vapeur en mme temps, veillez ne pas mettre trop de riz afin de laisser assez de place pour le plateau de cuisson la vapeur. Les aliments sont prts une fois la cuisson du riz termine.

Sivousutilisezuneassiette,posez-lasurleplateau. 5 Fermez correctement le couvercle.

- - -

-

-

,

,

,

-

-

Franais 1

6 Suivezlestapes6,7et8duchapitreCuissonduriz. Le temps de cuisson dpend de la quantit daliments cuire la vapeur. Lorsque la cuisson la vapeur est termine, le voyant de cuisson steint et le voyant de maintien au chaud sallume, ce qui indique que lappareil passe automatiquement en mode de maintien au chaud.

Pourterminerlacuisson,tirezlamanetteverslehautetdbranchezlecordon dalimentationdelaprisesecteur.Pourarrterlemodedemaintienauchaud,dbranchezle cordon dalimentation de la prise secteur.

8 Ouvrez le couvercle et retirez avec prcaution les aliments cuits la vapeur de lassiette ou du plateau. Utilisez un gant de cuisine ou un torchon car lassiette et le plateau sont trs chauds.

Faites attention la vapeur brlante. Maintien au chaud

Ce mode vous permet de maintenir votre riz au chaud pendant une longue priode. Lorsquelacuissonesttermine,lecuiseurrizpasseautomatiquementenmodede maintien au chaud. Le voyant de cuisson steint et le voyant de maintien au chaud sallume.

Il est recommand de ne pas maintenir votre riz au chaud pendant plus de 5 heures pour en conserver larme. Le mode de maintien au chaud ne sarrte pas automatiquement. Pour arrter ce mode, dbranchez le cordon dalimentation de la prise secteur.

nettoyage Dbranchez le cuiseur riz avant de le nettoyer. Attendezquelecuiseurrizaitsuffisammentrefroidiavantdelenettoyer. Pour protger la surface de la cuve, vitez :

dutiliser la cuve pour laver la vaisselle ; de verser du vinaigre dans la cuve.

1 Retirez le plateau de cuisson la vapeur et la cuve de lappareil. Nettoyezlecouvercle,lacuve,leplateau,lacuillrerizleausavonneuselaidedune

ponge ou dun torchon. Nutilisezjamaisdeproduitsabrasifs,detamponsrcureroudustensilesmtalliquespour nettoyer la cuve au risque dendommager sa surface. Pournettoyerlecorpsducuiseurrizlintrieuretlextrieur,utilisezunchiffonhumide. Ne plongez jamais le corps du cuiseur riz dans leau et ne le rincez pas sous le robinet. Essuyez llment chauffant avec un torchon sec.

Environnement Lorsquil ne fonctionnera plus, ne jetez pas lappareil avec les ordures mnagres, mais dposez- le un endroit assign cet effet, o il pourra tre recycl. Vous contribuerez ainsi la protection de lenvironnement (fig. 11).

,

- -

-

Franais1

garantie et service Si vous souhaitez obtenir des informations supplmentaires ou faire rparer lappareil, ou si vous rencontrez un problme, rendez-vous sur le site Web de Philips ladresse www.philips.com ou contactez le Service Consommateurs Philips de votre pays (vous trouverez le numro de tlphone correspondant sur le dpliant de garantie internationale). Sil nexiste pas de Service Consommateurs Philips dans votre pays, renseignez-vous auprs de votre revendeur Philips local.

Dpannage Si votre cuiseur riz ne fonctionne pas correctement ou si vous ntes pas satisfait de la qualit des aliments cuits, consultez le tableau ci-dessous. Si vous narrivez pas rsoudre le problme, veuillez contacter le Service Consommateurs Philips de votre pays.

Problme Cause Solution

Le voyant de cuisson ne sallume pas.

Il sagit dun problme de branchement.

Vrifiez si le cuiseur riz est branch et si la fiche a t correctement insre dans la prise.

Le voyant est dfectueux.

Confiez lappareil votre revendeur Philips ou un Centre Service Agr Philips.

Le voyant de maintien au chaud ne sallume pas lorsque la cuisson est finie.

Le voyant est dfectueux.

Confiez lappareil votre revendeur Philips ou un Centre Service Agr Philips.

De leau dborde de lappareil pendant la cuisson.

Vous avez vers une trop grande quantit deau.

Ajoutez de leau jusquau niveau correspondant au nombre de tasses de riz utilises. Pour viter que de leau dborde de lappareil lors de la cuisson, vrifiez que le niveau deau ne dpasse pas le niveau suprieur.

Le riz nest pas cuit.

Vous navez pas ajout suffisamment deau.

Ajoutez de leau jusquau niveau correspondant lintrieur de la cuve (voir le chapitre Utilisation de lappareil ).

La cuisson na pas commenc.

Vous navez pas abaiss la manette.

La cuve nest pas directement en contact avec llment chauffant.

Assurez-vous quaucun rsidu ne se trouve sur llment chauffant.

Llment chauffant est endommag.

Confiez lappareil votre revendeur Philips ou un Centre Service Agr Philips.

Le riz cuit est trop dur.

Vous navez pas ajout suffisamment deau.

Ajoutez un peu plus deau que le niveau correspondant au nombre de tasses de riz utilises. Pour viter que de leau dborde de lappareil lors de la cuisson, vrifiez que le niveau deau ne dpasse pas le niveau suprieur.

Franais 15

Problme Cause Solution

Le riz est trop cuit. Vous avez vers une trop grande quantit deau.

Ajoutez de leau jusquau niveau correspondant lintrieur de la cuve (voir le chapitre Utilisation de lappareil ).

Le riz est sec. Le riz na pas t rinc correctement.

Rincez le riz jusqu ce que leau devienne claire.

Le cuiseur riz ne passe pas automatiquement en mode de maintien au chaud.

Le thermostat est dfectueux.

Confiez lappareil votre revendeur Philips ou un Centre Service Agr Philips.

Les aliments nont pas t correctement cuits.

Vous avez plac trop daliments dans le plateau de cuisson la vapeur.

Rpartissez les aliments uniformment et ne cuisez pas une quantit trop importante.

Franais16

1

18

19

0

1

5

6

8

9

0

5

6 8 9

10 11

Manualsnet FAQs

If you want to find out how the HD4711 Philips works, you can view and download the Philips HD4711/64 HD4711 Rice Cooker User Manual on the Manualsnet website.

Yes, we have the User Manual for Philips HD4711 as well as other Philips manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Philips HD4711. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Philips HD4711/64 HD4711 Rice Cooker User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Philips HD4711/64 HD4711 Rice Cooker User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Philips HD4711/64 HD4711 Rice Cooker User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Philips HD4711/64 HD4711 Rice Cooker User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Philips HD4711/64 HD4711 Rice Cooker User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.