Philips Avent SCD292/00 SCF332 Pump Set User Manual PDF

1 of 14
1 of 14

Summary of Content for Philips Avent SCD292/00 SCF332 Pump Set User Manual PDF

SCF334, SCF332

Always here to help you Register your product and get support at www.philips.com/welcome

1

6

Introduction Congratulations on your purchase and welcome to Philips AVENT! To fully benefit from the support that Philips AVENT offers, register your product at www.philips.com/welcome. The Philips AVENT breast pump has a unique design that enables you to sit in a more comfortable position while expressing. The soft massage cushion* is designed to feel soft and warm and imitates your babys sipping action to provide fast milk flow - comfortably and gently. The breast pump starts in a gentle mode that helps to stimulate your milk flow. You can then choose from three suction modes, according to your own personal comfort. The pump is easy to assemble and operate and all parts that come into contact with breast milk are dishwasher-safe. Healthcare professionals say that breast milk is the best nutrition for babies during the first year, combined with solid food after the first 6 months. Your breast milk is specially adapted to your babys needs and contains antibodies which help protect your baby against infection and allergies. A breast pump can help you to breastfeed longer. You can express and store your milk so that your baby can still enjoy the benefits of it, even if you cannot be there to provide it yourself. As the pump is compact and discrete to use, you can take it with you anywhere, allowing you to express milk at your own convenience and maintain your milk supply. *The cushion included with this pump was designed to comfortably fit the majority of mothers. However, should you need it, you can buy a cushion for larger nipples separately.

General description (Fig. 1) 1 Motor unit with silicone tube and cap* 2 Silicone diaphragm* 3 Pump body* 4 Massage cushion* 5 Cover* 6 Battery housing (SCF332 only) 7 On/off button 8 Stimulation button 9 Low suction button 10 Medium suction button 11 Deep suction button 12 Adapter 13 White valve* 14 Philips AVENT Natural bottle* 15 Cap* 16 Screw ring* 17 Teat* 18 Sealing disc*

*Note: Model SCF334 comes with two pieces of the marked parts, except for the motor unit.

Important Read this user manual carefully before you use the breast pump and save it for future reference.

Danger - Keep the motor unit and the adapter dry. - Do not use the breast pump in the bath or in the shower.

ENGLISH

- Do not place or store the breast pump near a tub or sink. - Do not reach for a product that has fallen into water. Unplug immediately.

Warning - Always unplug the breast pump immediately after use. - This appliance can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

- Do not allow children or pets to play with the motor unit, the adapter or accessories, as these parts may pose a choking or strangulation danger.

- Inspect the breast pump, including the adapter, for signs of damage before each use. Do not use the breast pump if the adapter or plug is damaged, if it does not work properly, if it is damaged or if it has been dropped or submerged in water.

- Do not use the breast pump outdoors, where aerosol spray products are used or where oxygen is administered.

- The breast pump is not suitable for use in the presence of flammable anaesthetic mixtures with air or with oxygen or nitrous oxide.

- There are no user serviceable parts inside the motor unit of the breast pump. Do not attempt to open, service or repair the breast pump yourself. If you do, your guarantee becomes invalid.

- Keep the adapter and the silicone tubes away from heated surfaces. - Only use the adapter indicated on the appliance. - Do not attempt to remove the pump body from your breast while

under vacuum. Switch off the appliance and break the seal between your breast and the pump funnel with your finger. Remove the pump from your breast.

- Never use the breast pump while you are pregnant, as pumping can induce labour.

- Never use the breast pump while you are sleepy or drowsy. - Do not expose the breast pump to extreme heat and do not place it in

direct sunlight. Caution

- The breast pump is only intended for repeated use by a single user. - Do not leave the breast pump unattended when it is plugged in.

ENGLISH 7

- Never drop or insert any foreign object into any opening. - Although the breast pump is compliant with applicable EMC directives,

it may still be susceptible to excessive emissions and/or may interfere with more sensitive equipment.

- Never use any accessories or parts from other manufacturers or that Philips AVENT does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid.

- Clean, rinse and sterilise all pump parts, except the motor unit, the tube and cap and the adapter before each use.

- Never put the motor unit or the adapter in water or in a steriliser, as this causes permanent damage to these parts.

- Do not use antibacterial or abrasive cleaning agents when you clean breast pump parts.

- Do not use the breast pump if the silicone diaphragm appears to be damaged or broken. See chapter Ordering accessories for information on how to obtain replacement parts.

- Do not continue pumping for more than five minutes at a time if you do not succeed in expressing any milk.

- If the pressure generated is uncomfortable or causes pain, switch off the appliance, break the seal between the breast and the pump body with your finger and remove the pump from your breast. Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

Preparing for use The motor unit, the silicone tube and cap and the adapter do not require cleaning and sterilising, as they do not come into contact with breast milk. Clean and sterilise all other parts of the breast pump before first use as described in chapter Cleaning and sterilising. Also clean these parts after each subsequent use and sterilise them before each subsequent use.

Assembling the breast pump Note: Make sure you have cleaned and sterilised the appropriate parts of the breast pump. Wash your hands thoroughly before you handle the cleaned parts. Be careful, the cleaned parts may still be hot. Tip: You may find it easier to assemble the breast pump while it is wet. 1 Insert the white valve into the pump body from underneath. Push in the valve as far

as possible (Fig. 2). 2 Screwthepumpbodyclockwiseontothebottleuntilitissecurelyfixed(Fig.3).

ENGLISH8

3 Placethesiliconediaphragmintothepumpbodyfromabove.Makesureitfitssecurely aroundtherimbypressingdownwithyourfingerstoensureaperfectseal(Fig.4).

4 Place the massage cushion into the funnel-shaped section of the pump body. Push in the inner part of the massage cushion as far as possible and make sure that it is perfectly sealed all around the rim of the pump body. Press in between the petals to remove any trapped air (Fig. 5).

Note: Place the cover over the massage cushion to keep the breast pump clean while you prepare for expressing. 5 Insert the adapter into the wall socket and insert the other end into the motor unit (Fig. 6). The adapter reference code is indicated on the bottom of the appliance. Only use the indicated adapter with the appliance. - For battery operation (SCF332 only), turn the bottom of the motor unit in the direction

indicated by the marks on the bottom (1) and remove it (2). Insert four new 1.5V AA batteries (or 1.2V, if rechargeable) into the battery housing. Reattach the bottom to the motor unit (Fig. 7).

Note: A new set of batteries provides up to 3 hours of operation. If you have inserted batteries in the battery housing of the motor unit and plug in the adapter, the breast pump will run from the main power supply. The batteries cannot be charged in the unit. 6 Attach the silicone tube and cap onto the diaphragm. Push down the cap until it is securely

in place (Fig. 8).

Using the breast pump When to express milk

If breastfeeding goes well for you, it is advisable (unless advised otherwise by your healthcare professional/breastfeeding advisor) to wait until your milk supply and breastfeeding schedule are established (normally at least 2 to 4 weeks after giving birth). Exceptions: - If breastfeeding does not immediately work for you, expressing regularly can help to establish

and maintain your milk supply. - If you are expressing milk for your baby to be given in hospital. - If your breasts are engorged (painful or swollen): you can express a small amount of milk before

or between feeds to ease the pain and to help your baby latch on more easily. - If you have sore or cracked nipples, you may wish to express your milk until they are healed. - If you are separated from your baby and wish to continue to breastfeed when you are reunited,

you should express your milk regularly to stimulate your milk supply. You need to find the optimum times of the day to express your milk, for example just before or after your babys first feed in the morning when your breasts are full, or after a feed if your baby has not emptied both breasts. If you have returned to work, you may need to express during a break. Using a breast pump requires practice and it may take several attempts before you succeed. Fortunately, the Philips AVENT electric breast pump is easy to assemble and use so you will soon get used to expressing with it.

Tips - Familiarise yourself with the breast pump and how to operate it before you use it for the

first time. - Choose a time when you are not in a rush and will not be interrupted. - A photograph of your baby can help encourage the let-down reflex. - Warmth can also help: try to express after a bath or shower, or place a warm cloth or Philips

AVENT Thermopad on the breast for a few minutes before you start expressing.

ENGLISH 9

- You may find it easier to express while your baby is feeding from the other breast, or immediately after a feed.

- If expressing becomes painful, stop and consult your breastfeeding advisor or healthcare professional.

Operating the breast pump 1 Wash your hands thoroughly and make sure your breasts are clean. 2 Relaxinacomfortablechair(youmaywishtousecushionstosupportyourback).

Make sure you have a glass of water nearby. 3 Press the assembled pump body against your breast. Make sure that your nipple is centered,

so that the massage cushion creates an airtight seal. SCF334: The twin electric breast pump enables you to express milk from both breasts at the same time. However, you can also use the appliance to express from one breast in just the same way.

4 Press the on/off button (Fig. 9). , The breast pump automatically starts up in stimulation mode and the on/off button and the

stimulation button light up. , You begin to feel the suction on your breast.

5 Onceyourmilkstartsflowing,youcanadoptaslowerrhythmbypressingthelowestsuction button (Fig. 10).

, This button lights up instead of the stimulation button. Note: Do not worry if your milk does not flow immediately. Relax and continue pumping. The first few times you use the breast pump, you may need to use a higher suction mode to get your milk flowing. 6 Depending on your own personal comfort, you may wish to use a higher suction mode that

provides deeper suction. You can return to a lower suction mode, or switch off the breast pump whenever you like by pressing the appropriate button (Fig. 11).

Note: You do not need to use all suction modes, only use the modes that are comfortable for you. Always switch off the breast pump before you remove the pump body from your breast. Donotcontinuepumpingformorethan5minutesatatimeifyoudonotsucceedinexpressing anymilk.Trytoexpressatanothertimeduringtheday.Iftheprocessbecomesvery uncomfortable or painful, stop using the pump and consult your breastfeeding advisor. 7 Onaverage,youneedtopumpfor10minutestoexpress60-125ml(2-4floz)ofbreastmilk

from one breast. However, this is just an indication and varies from woman to woman. Note: If you regularly express more than 125ml per session, you can use a 260ml/9fl oz Philips AVENT bottle to prevent overfilling and spillage. 8 Whenyouhavefinishedexpressing,switchoffthebreastpumpandcarefullyremovethe

pump body from your breast. 9 Unscrew the bottle from the pump body ready for feeding/storage. Clean the other used

parts of the breast pump according to the instructions in chapter Cleaning and sterilising. 10 Unplug the motor unit. For easy storage, wrap the silicone tube around the motor unit and

clip the cap onto the tube (Fig. 12).

ENGLISH10

After use Storing breast milk

Only store breast milk collected with a sterile pump. Breast milk can be stored in the fridge (not in the door) for up to 48 hours. Expressed milk should be refrigerated immediately. If you store milk in the fridge to add to during the day, only add milk that has been expressed into a sterilised bottle or breast milk container. Breast milk can be stored in the freezer for up to three months as long as it is kept in either sterilised bottles fitted with a sterilised screw ring and sealing disc. Clearly label the bottle with the date and time of expression and use older breast milk first. If you intend to feed your baby with the expressed breast milk within 48 hours, you can store the breast milk in the fridge in an assembled Philips AVENT bottle:

1 Unscrew the bottle and remove it from the pump body. 2 Assemble a sterilised teat and screw ring onto the bottle according to the separate

instructions provided with the bottle. Seal the teat with the dome cap. 3 Alternatively, insert a sterilised sealing disc into a sterilised screw ring and screw this onto the bottle.

Dos - Always refrigerate or freeze expressed milk immediately. - Only store milk collected with a sterilised breast pump in sterilised bottles.

Donts - Never refreeze thawed breast milk. - Never add fresh breast milk to frozen breast milk.

Feeding your baby expressed breast milk You can feed your baby with breast milk from Philips AVENT bottles and storage cups: 1 If you use frozen breast milk, let it defrost completely before you heat it.

Note: In case of an emergency, you can defrost the milk in a bowl of hot water. 2 Heat the bottle or storage cup with defrosted or refrigerated breast milk in a bowl of hot water

or in a bottle warmer. 3 Remove the screw ring and sealing disc from the bottle or remove the lid from the storage cup. 4 If you are using a storage cup, screw the adapter ring onto the cup. 5 Screw a sterilised screw ring with sterilised teat onto the bottle or onto the storage cup with

adapter ring.

Dos - Always check the temperature of the milk before you feed it to your baby. - Always discard any breast milk that is left over at the end of a feed.

Donts - Never heat breast milk in a microwave, as this can cause uneven heating, which can lead to hot

spots in the milk. It may also destroy nutrients in the milk.

Cleaning and sterilising The motor unit, the silicone tube and cap and the adapter do not require cleaning and sterilising, as they do not come into contact with breast milk. Clean and sterilise all other parts of the breast pump before first use. Also clean these parts after each subsequent use and sterilise them before each subsequent use.

ENGLISH 11

Danger: Never put the motor unit or the adapter in water or in a steriliser.

1 Disassemble the breast pump completely. Also remove the white valve. Be careful when you remove the white valve and when you clean it. If it gets damaged, your breast pump does not function properly. To remove the white valve, gently pull at the ribbed tab on the side of the valve. 2 Cleanallparts,exceptthemotorunit,thesiliconetubeandcapandtheadapter,inthe

dishwasher (on the top rack only) or in hot water with some mild washing-up liquid and then rinse them thoroughly.

Tocleanthevalve,rubitgentlybetweenyourfingersinwarmwaterwithsomewashing-up liquid. Do not insert objects into the valve, as this may cause damage. 3 Sterilise the cleaned parts of the breast pump in a Philips AVENT steam steriliser or by

boiling them for 5 minutes. Never put the motor unit or the adapter in water or a steriliser. If necessary, you can wipe the motor unit with a soft, damp cloth.

Storage Keep the breast pump out of direct sunlight as prolonged exposure may cause discolouration.

1 Store the breast pump and its accessories in a safe and dry place.

Compatibility The Philips AVENT electric breast pump is compatible with Philips AVENT bottles in our range. When you use Classic bottles that feature our two-piece anti-colic system, always insert the ring in the top of the bottle before you attach it to the breast pump. When you use other Philips AVENT bottles, use the same type of teat that was supplied with that bottle. For details on how to assemble the teat and general cleaning instructions, refer to the user manual that came with your bottle. These details can also be found on our website, www.philips.com/support.

Replacement Batteries

Only replace the non-rechargeable batteries of the breast pump (SCF332 only) with four 1.5V AA batteries (or 1.2V if rechargeable). For instructions on how to replace the batteries see chapter Preparing for use.

Ordering accessories To buy accessories or spare parts, visit www.shop.philips.com/service or go to your Philips dealer. You can also contact the Philips Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details).

Recycling - This symbol on a product means that the product is covered by European Directive 2012/19/EU

(Fig. 13). - This symbol means that the product contains batteries covered by European Directive

2006/66/EC which cannot be disposed of with normal household waste (Fig. 14).

ENGLISH12

- Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health.

Removing the disposable batteries To remove the disposable batteries, see chapter Preparing for use, section Assembling the breast pump.

Guarantee and support If you need information or support, please visit www.philips.com/support or read the separate worldwide guarantee leaflet.

Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Centre in your country or visit us online at www.philips.com/support.

Problem Solution

I experience pain when I use the breast pump.

Stop using the breast pump and consult your breastfeeding advisor. If the pump body does not come away easily from the breast, it may be necessary to break the vacuum by placing a finger between the breast and the massage cushion.

The breast pump is scratched.

In case of regular use, some light scratching is normal and does not cause problems. However, if a part of the breast pump becomes badly scratched or if it cracks, stop using the breast pump and contact the Philips Consumer Care Centre or visit www.shop.philips.com/ service to obtain a replacement part. Be aware that combinations of cleaning agents, sterilising solution, softened water and temperature fluctuations may, under certain circumstances, cause the plastic to crack. Avoid contact with abrasive or antibacterial detergents as these can damage the plastic.

The breast pump does not work and the on/ off button flashes.

First check if you have assembled the breast pump correctly and make sure that there is no kink in the tube. If you are using SCF332 with batteries, replace the batteries according to the instructions in chapter Preparing for use, action 5. If you are using SCF334 or SCF332 on mains electricity, check to make sure you are using the adapter that was supplied with the product. If the problem persists, contact the Consumer Care Centre in your country.

I do not feel any suction.

Check if you have assembled the breast pump correctly by following the steps in chapter Preparing for use. Make sure the silicone tube is firmly attached to the motor unit and to the cap and diaphragm.

I need to replace the silicone tube, but do not know how to remove it.

To remove the tube, grab it close to the motor unit and pull while twisting it. To reconnect the tube, ease the tube back onto the connector on the motor unit with a slight twisting motion. Make sure it is securely attached.

ENGLISH 13

The Philips AVENT milk storage cups are pre-sterilised for immediate use. Re-sterilise cups, lids and adaptors before each subsequent use so they can be used again. We recommend using the milk storage cups several times and to discard when showing signs of wear and tear. Expressed breast milk can be stored in the fridge for up to 48 hours (not in the door) or freezer for up to 3 months. Never refreeze breast milk or add fresh breast milk to already frozen milk. Food can be stored in the fridge for up to 48 hours or freezer for up to 3 months. Label the content and date using a marker or pencil. The milk storage cups have twist on lids to provide leakproof storage and transport.

For your childs safety and health WARNING! Before first use, clean the product. Before first and every use, take all items apart, wash and rinse thoroughly. Sterilise using a Philips AVENT Steriliser or boil for 5 minutes. This is to ensure hygiene. Clean before each use. Always use this product with adult supervision Never use feeding teats as a soother Continuous and prolonged sucking of fluids will cause tooth decay Always check food temperature before feeding Keep all components not in use out of the reach of children Do not leave a feeding teat in direct sunlight or heat when not in use, or leave in disinfectant (sterilising solution) for longer than recommended, as this may weaken the teat Do not place in a heated oven Before each use, inspect the product. Throw away at the first sign of damage or weakness During inspection of teats pull the feeding teat in all directions DO NOT warm contents in a microwave oven as this may cause uneven heating and could scald your baby Wash your hands thoroughly and ensure surfaces are clean before contact with sterilised components DO NOT use abrasive cleaning agents or anti-bacterial cleaners Excessive concentrations of detergents may eventually cause plastic components to crack. Should this occur, replace immediately Dishwasher safe food colourings may discolour components For hygiene reasons, we recommend replacing teats/spouts after 3 months Always assemble teats when wet Do not overtighten teat assembly on bottle Keep teats in a dry, covered container DO NOT allow child to play with small parts or walk/run while using bottles or cups Drinks other than milk or water, such as fruit juices and flavoured sugary drinks are not recommended. If they are used, they should be well diluted and only used for limited periods, not constantly sipped The milk storage cups are suitable for all methods of sterilisation Avoid placing unnecessary pressure when lids are in place The content will heat faster in the milk storage cups than in standard feeding bottles/containers Spoon is suitable for use 6+ months.

GB: 0844 33 80 489 5 pence/minute (mobile rates may vary) IRL: 0818 21 01 41 national call rate (mobiles vary) AU: 1300 363 391 (option 4)

4213.354.0021.3

GB

www.philips.com/AVENT Philips NL9206AD-4 Drachten

EN 14350, EN14372

The Philips AVENT milk storage cups are pre-sterilised for immediate use. Re-sterilise cups, lids and adaptors before each subsequent use so they can be used again. We recommend using the milk storage cups several times and to discard when showing signs of wear and tear. Expressed breast milk can be stored in the fridge for up to 48 hours (not in the door) or freezer for up to 3 months. Never refreeze breast milk or add fresh breast milk to already frozen milk. Food can be stored in the fridge for up to 48 hours or freezer for up to 3 months. Label the content and date using a marker or pencil. The milk storage cups have twist on lids to provide leakproof storage and transport.

For your childs safety and health WARNING! Before first use, clean the product. Before first and every use, take all items apart, wash and rinse thoroughly. Sterilise using a Philips AVENT Steriliser or boil for 5 minutes. This is to ensure hygiene. Clean before each use. Always use this product with adult supervision Never use feeding teats as a soother Continuous and prolonged sucking of fluids will cause tooth decay Always check food temperature before feeding Keep all components not in use out of the reach of children Do not leave a feeding teat in direct sunlight or heat when not in use, or leave in disinfectant (sterilising solution) for longer than recommended, as this may weaken the teat Do not place in a heated oven Before each use, inspect the product. Throw away at the first sign of damage or weakness During inspection of teats pull the feeding teat in all directions DO NOT warm contents in a microwave oven as this may cause uneven heating and could scald your baby Wash your hands thoroughly and ensure surfaces are clean before contact with sterilised components DO NOT use abrasive cleaning agents or anti-bacterial cleaners Excessive concentrations of detergents may eventually cause plastic components to crack. Should this occur, replace immediately Dishwasher safe food colourings may discolour components For hygiene reasons, we recommend replacing teats/spouts after 3 months Always assemble teats when wet Do not overtighten teat assembly on bottle Keep teats in a dry, covered container DO NOT allow child to play with small parts or walk/run while using bottles or cups Drinks other than milk or water, such as fruit juices and flavoured sugary drinks are not recommended. If they are used, they should be well diluted and only used for limited periods, not constantly sipped The milk storage cups are suitable for all methods of sterilisation Avoid placing unnecessary pressure when lids are in place The content will heat faster in the milk storage cups than in standard feeding bottles/containers Spoon is suitable for use 6+ months.

GB: 0844 33 80 489 5 pence/minute (mobile rates may vary) IRL: 0818 21 01 41 national call rate (mobiles vary) AU: 1300 363 391 (option 4)

4213.354.0021.3

GB

www.philips.com/AVENT Philips NL9206AD-4 Drachten

EN 14350, EN14372

The Philips AVENT milk storage cups are pre-sterilised for immediate use. Re-sterilise cups, lids and adaptors before each subsequent use so they can be used again. We recommend using the milk storage cups several times and to discard when showing signs of wear and tear. Expressed breast milk can be stored in the fridge for up to 48 hours (not in the door) or freezer for up to 3 months. Never refreeze breast milk or add fresh breast milk to already frozen milk. Food can be stored in the fridge for up to 48 hours or freezer for up to 3 months. Label the content and date using a marker or pencil. The milk storage cups have twist on lids to provide leakproof storage and transport.

For your childs safety and health WARNING! Before first use, clean the product. Before first and every use, take all items apart, wash and rinse thoroughly. Sterilise using a Philips AVENT Steriliser or boil for 5 minutes. This is to ensure hygiene. Clean before each use. Always use this product with adult supervision Never use feeding teats as a soother Continuous and prolonged sucking of fluids will cause tooth decay Always check food temperature before feeding Keep all components not in use out of the reach of children Do not leave a feeding teat in direct sunlight or heat when not in use, or leave in disinfectant (sterilising solution) for longer than recommended, as this may weaken the teat Do not place in a heated oven Before each use, inspect the product. Throw away at the first sign of damage or weakness During inspection of teats pull the feeding teat in all directions DO NOT warm contents in a microwave oven as this may cause uneven heating and could scald your baby Wash your hands thoroughly and ensure surfaces are clean before contact with sterilised components DO NOT use abrasive cleaning agents or anti-bacterial cleaners Excessive concentrations of detergents may eventually cause plastic components to crack. Should this occur, replace immediately Dishwasher safe food colourings may discolour components For hygiene reasons, we recommend replacing teats/spouts after 3 months Always assemble teats when wet Do not overtighten teat assembly on bottle Keep teats in a dry, covered container DO NOT allow child to play with small parts or walk/run while using bottles or cups Drinks other than milk or water, such as fruit juices and flavoured sugary drinks are not recommended. If they are used, they should be well diluted and only used for limited periods, not constantly sipped The milk storage cups are suitable for all methods of sterilisation Avoid placing unnecessary pressure when lids are in place The content will heat faster in the milk storage cups than in standard feeding bottles/containers Spoon is suitable for use 6+ months.

GB: 0844 33 80 489 5 pence/minute (mobile rates may vary) IRL: 0818 21 01 41 national call rate (mobiles vary) AU: 1300 363 391 (option 4)

4213.354.0021.3

GB

www.philips.com/AVENT Philips NL9206AD-4 Drachten

EN 14350, EN14372

here to help: GB: 0844 33 80 489 national call rate (mobiles vary) IRL: 0818 21 01 41 national call rate (mobiles vary) AU: 1300 364 474 www.philips.com/Avent

thoroughly and that the surfaces are clean before contact with sterilised components. Assembly When you assemble the bottle, make sure you place the cap vertically onto the bottle so that the teat sits upright. To remove the cap, place your hand over the cap and your thumb in the dimple of the cap. The teat is easier to assemble if you wriggle it upwards instead of pulling it up in a straight line. Make sure you pull the teat through until its lower part is even with the screw ring. MaintenanceBefore first use place in boiling water for 5 minutes. Before each use, inspect all items. Pull the feeding teat in all directions. For optimum performance, pinch and massage the number on the teat between index finger and thumb prior to a feed. Throw away at the first signs of damage or weakness. For hygiene reasons, we recommend replacing teats after 3 months. Keep teats in a dry, covered container. When not in use, do not store in sunlight or heat, or leave in disinfectant (sterilising solution) for longer than recommended, as this may weaken the teat. Do not place in a heated oven. GlassNaturalbottle Glass bottles may break. Do not use metal inside the bottle to stir contents or for cleaning. This can damage the glass on the inside of the bottle. Before each use, inspect bottles for sharp edges or glass fragments inside. Do not use bottles if there are any cracks on or glass fragments in the bottle. Do not let babies drink unsupervised with this bottle. Compatibility Only use Philips Avent Natural teats with Philips Avent Natural feeding bottles. Spare teats are available separately. Make sure you use a teat with the correct flow rate when you feed your baby. When you use an older Philips Avent steriliser, please check on the website how to place the Natural bottle. Do not mix classic bottle parts and teats with parts of the Natural bottle. They may not fit and could cause leakage. The polypropylene Natural bottle is compatible with Philips Avent breast pumps, spouts, sealing discs and cup tops. The glass Natural bottle is compatible with Philips Avent breast pumps and sealing discs. For safety reasons, it is not recommended to use glass Natural bottles with handles, spouts and cup tops. If the bottle falls, it may break.Philips Avent is

GB ForyourchildssafetyandhealthWARNING!

Always use this product with adult supervision. Never use feeding teats as a soother. Continuous and prolonged sucking of fluids will cause tooth decay. Always check food temperature before feeding. Keep all components not in use out of the reach of children. Before first use, clean the product. Inspect before each use and pull the feeding teat in all directions. Throw away at the first signs of damage or weakness. Do not store a feeding teat in direct sunlight or heat, or leave in disinfectant (sterilising solution) for longer than recommended, as this may weaken the teat. Do not place in a heated oven. Before first use place in boiling water for 5 minutes. This is to ensure hygiene. Clean before each use. Wash and rinse thoroughly, then sterilise using a Philips Avent steriliser or boil for 5 minutes. Do not warm contents in a microwave oven, as this may cause uneven heating and could scald your baby. Dishwasher safe - food colourings may discolour components. Do not allow child to play with small parts or walk/run while using bottles or cups. Drinks other than milk and water, such as fruit juices and flavoured sugary drinks are not recommended. If used, they should be well diluted and only used for limited periods. Expressed breast milk can be stored in sterilised Philips Avent polypropylene bottles/containers in the refrigerator for up to 48 hours (not in the door) or in the freezer for up to 3 months. Never refreeze breast milk or add fresh breast milk to already frozen milk. Do not use abrasive cleaning agents or anti-bacterial cleaners. Do not place components directly on surfaces that have been cleaned with anti-bacterial cleaners. Excessive concentration of detergents may eventually cause plastic components to crack. Should this occur, replace immediately. Plastic material properties may be affected by sterilising and high temperatures. This can affect the fit of the cap.CleaningBefore first use, disassemble all parts, clean and sterilise the product. After every use, take all items apart, wash in warm soapy water and rinse thoroughly. Make sure that you wash your hands

www.philips.com/avent

Philips Consumer Lifestyle BV Tussendiepen 4, 9206 AD Drachten, Netherlands

Trademarks owned by the Philips Group. 2015 Koninklijke Philips N.V. All rights reserved

4213.354.3821.1 (08/15)

FSC

Do not use with glass bottle Nepouvejte se sklennou lahv Ne hasznlja vegbl kszlt cumisveggel Ne uporabljajte s stekleno stekleniko Nemojte koristiti sa staklenom boicom Nu utilizai cu un biberon din sticl Nemojte da koristite sa staklenom flaicom

here to help: GB: 0844 33 80 489 national call rate (mobiles vary) IRL: 0818 21 01 41 national call rate (mobiles vary) AU: 1300 364 474 www.philips.com/Avent

thoroughly and that the surfaces are clean before contact with sterilised components. Assembly When you assemble the bottle, make sure you place the cap vertically onto the bottle so that the teat sits upright. To remove the cap, place your hand over the cap and your thumb in the dimple of the cap. The teat is easier to assemble if you wriggle it upwards instead of pulling it up in a straight line. Make sure you pull the teat through until its lower part is even with the screw ring. MaintenanceBefore first use place in boiling water for 5 minutes. Before each use, inspect all items. Pull the feeding teat in all directions. For optimum performance, pinch and massage the number on the teat between index finger and thumb prior to a feed. Throw away at the first signs of damage or weakness. For hygiene reasons, we recommend replacing teats after 3 months. Keep teats in a dry, covered container. When not in use, do not store in sunlight or heat, or leave in disinfectant (sterilising solution) for longer than recommended, as this may weaken the teat. Do not place in a heated oven. GlassNaturalbottle Glass bottles may break. Do not use metal inside the bottle to stir contents or for cleaning. This can damage the glass on the inside of the bottle. Before each use, inspect bottles for sharp edges or glass fragments inside. Do not use bottles if there are any cracks on or glass fragments in the bottle. Do not let babies drink unsupervised with this bottle. Compatibility Only use Philips Avent Natural teats with Philips Avent Natural feeding bottles. Spare teats are available separately. Make sure you use a teat with the correct flow rate when you feed your baby. When you use an older Philips Avent steriliser, please check on the website how to place the Natural bottle. Do not mix classic bottle parts and teats with parts of the Natural bottle. They may not fit and could cause leakage. The polypropylene Natural bottle is compatible with Philips Avent breast pumps, spouts, sealing discs and cup tops. The glass Natural bottle is compatible with Philips Avent breast pumps and sealing discs. For safety reasons, it is not recommended to use glass Natural bottles with handles, spouts and cup tops. If the bottle falls, it may break.Philips Avent is

GB ForyourchildssafetyandhealthWARNING!

Always use this product with adult supervision. Never use feeding teats as a soother. Continuous and prolonged sucking of fluids will cause tooth decay. Always check food temperature before feeding. Keep all components not in use out of the reach of children. Before first use, clean the product. Inspect before each use and pull the feeding teat in all directions. Throw away at the first signs of damage or weakness. Do not store a feeding teat in direct sunlight or heat, or leave in disinfectant (sterilising solution) for longer than recommended, as this may weaken the teat. Do not place in a heated oven. Before first use place in boiling water for 5 minutes. This is to ensure hygiene. Clean before each use. Wash and rinse thoroughly, then sterilise using a Philips Avent steriliser or boil for 5 minutes. Do not warm contents in a microwave oven, as this may cause uneven heating and could scald your baby. Dishwasher safe - food colourings may discolour components. Do not allow child to play with small parts or walk/run while using bottles or cups. Drinks other than milk and water, such as fruit juices and flavoured sugary drinks are not recommended. If used, they should be well diluted and only used for limited periods. Expressed breast milk can be stored in sterilised Philips Avent polypropylene bottles/containers in the refrigerator for up to 48 hours (not in the door) or in the freezer for up to 3 months. Never refreeze breast milk or add fresh breast milk to already frozen milk. Do not use abrasive cleaning agents or anti-bacterial cleaners. Do not place components directly on surfaces that have been cleaned with anti-bacterial cleaners. Excessive concentration of detergents may eventually cause plastic components to crack. Should this occur, replace immediately. Plastic material properties may be affected by sterilising and high temperatures. This can affect the fit of the cap.CleaningBefore first use, disassemble all parts, clean and sterilise the product. After every use, take all items apart, wash in warm soapy water and rinse thoroughly. Make sure that you wash your hands

www.philips.com/avent

Philips Consumer Lifestyle BV Tussendiepen 4, 9206 AD Drachten, Netherlands

Trademarks owned by the Philips Group. 2015 Koninklijke Philips N.V. All rights reserved

4213.354.3821.1 (08/15)

FSC

Do not use with glass bottle Nepouvejte se sklennou lahv Ne hasznlja vegbl kszlt cumisveggel Ne uporabljajte s stekleno stekleniko Nemojte koristiti sa staklenom boicom Nu utilizai cu un biberon din sticl Nemojte da koristite sa staklenom flaicom

here to help: GB: 0844 33 80 489 national call rate (mobiles vary) IRL: 0818 21 01 41 national call rate (mobiles vary) AU: 1300 364 474 www.philips.com/Avent

thoroughly and that the surfaces are clean before contact with sterilised components. Assembly When you assemble the bottle, make sure you place the cap vertically onto the bottle so that the teat sits upright. To remove the cap, place your hand over the cap and your thumb in the dimple of the cap. The teat is easier to assemble if you wriggle it upwards instead of pulling it up in a straight line. Make sure you pull the teat through until its lower part is even with the screw ring. MaintenanceBefore first use place in boiling water for 5 minutes. Before each use, inspect all items. Pull the feeding teat in all directions. For optimum performance, pinch and massage the number on the teat between index finger and thumb prior to a feed. Throw away at the first signs of damage or weakness. For hygiene reasons, we recommend replacing teats after 3 months. Keep teats in a dry, covered container. When not in use, do not store in sunlight or heat, or leave in disinfectant (sterilising solution) for longer than recommended, as this may weaken the teat. Do not place in a heated oven. GlassNaturalbottle Glass bottles may break. Do not use metal inside the bottle to stir contents or for cleaning. This can damage the glass on the inside of the bottle. Before each use, inspect bottles for sharp edges or glass fragments inside. Do not use bottles if there are any cracks on or glass fragments in the bottle. Do not let babies drink unsupervised with this bottle. Compatibility Only use Philips Avent Natural teats with Philips Avent Natural feeding bottles. Spare teats are available separately. Make sure you use a teat with the correct flow rate when you feed your baby. When you use an older Philips Avent steriliser, please check on the website how to place the Natural bottle. Do not mix classic bottle parts and teats with parts of the Natural bottle. They may not fit and could cause leakage. The polypropylene Natural bottle is compatible with Philips Avent breast pumps, spouts, sealing discs and cup tops. The glass Natural bottle is compatible with Philips Avent breast pumps and sealing discs. For safety reasons, it is not recommended to use glass Natural bottles with handles, spouts and cup tops. If the bottle falls, it may break.Philips Avent is

GB ForyourchildssafetyandhealthWARNING!

Always use this product with adult supervision. Never use feeding teats as a soother. Continuous and prolonged sucking of fluids will cause tooth decay. Always check food temperature before feeding. Keep all components not in use out of the reach of children. Before first use, clean the product. Inspect before each use and pull the feeding teat in all directions. Throw away at the first signs of damage or weakness. Do not store a feeding teat in direct sunlight or heat, or leave in disinfectant (sterilising solution) for longer than recommended, as this may weaken the teat. Do not place in a heated oven. Before first use place in boiling water for 5 minutes. This is to ensure hygiene. Clean before each use. Wash and rinse thoroughly, then sterilise using a Philips Avent steriliser or boil for 5 minutes. Do not warm contents in a microwave oven, as this may cause uneven heating and could scald your baby. Dishwasher safe - food colourings may discolour components. Do not allow child to play with small parts or walk/run while using bottles or cups. Drinks other than milk and water, such as fruit juices and flavoured sugary drinks are not recommended. If used, they should be well diluted and only used for limited periods. Expressed breast milk can be stored in sterilised Philips Avent polypropylene bottles/containers in the refrigerator for up to 48 hours (not in the door) or in the freezer for up to 3 months. Never refreeze breast milk or add fresh breast milk to already frozen milk. Do not use abrasive cleaning agents or anti-bacterial cleaners. Do not place components directly on surfaces that have been cleaned with anti-bacterial cleaners. Excessive concentration of detergents may eventually cause plastic components to crack. Should this occur, replace immediately. Plastic material properties may be affected by sterilising and high temperatures. This can affect the fit of the cap.CleaningBefore first use, disassemble all parts, clean and sterilise the product. After every use, take all items apart, wash in warm soapy water and rinse thoroughly. Make sure that you wash your hands

www.philips.com/avent

Philips Consumer Lifestyle BV Tussendiepen 4, 9206 AD Drachten, Netherlands

Trademarks owned by the Philips Group. 2015 Koninklijke Philips N.V. All rights reserved

4213.354.3821.1 (08/15)

FSC

Do not use with glass bottle Nepouvejte se sklennou lahv Ne hasznlja vegbl kszlt cumisveggel Ne uporabljajte s stekleno stekleniko Nemojte koristiti sa staklenom boicom Nu utilizai cu un biberon din sticl Nemojte da koristite sa staklenom flaicom

here to help: GB: 0844 33 80 489 national call rate (mobiles vary) IRL: 0818 21 01 41 national call rate (mobiles vary) AU: 1300 364 474 www.philips.com/Avent

thoroughly and that the surfaces are clean before contact with sterilised components. Assembly When you assemble the bottle, make sure you place the cap vertically onto the bottle so that the teat sits upright. To remove the cap, place your hand over the cap and your thumb in the dimple of the cap. The teat is easier to assemble if you wriggle it upwards instead of pulling it up in a straight line. Make sure you pull the teat through until its lower part is even with the screw ring. MaintenanceBefore first use place in boiling water for 5 minutes. Before each use, inspect all items. Pull the feeding teat in all directions. For optimum performance, pinch and massage the number on the teat between index finger and thumb prior to a feed. Throw away at the first signs of damage or weakness. For hygiene reasons, we recommend replacing teats after 3 months. Keep teats in a dry, covered container. When not in use, do not store in sunlight or heat, or leave in disinfectant (sterilising solution) for longer than recommended, as this may weaken the teat. Do not place in a heated oven. GlassNaturalbottle Glass bottles may break. Do not use metal inside the bottle to stir contents or for cleaning. This can damage the glass on the inside of the bottle. Before each use, inspect bottles for sharp edges or glass fragments inside. Do not use bottles if there are any cracks on or glass fragments in the bottle. Do not let babies drink unsupervised with this bottle. Compatibility Only use Philips Avent Natural teats with Philips Avent Natural feeding bottles. Spare teats are available separately. Make sure you use a teat with the correct flow rate when you feed your baby. When you use an older Philips Avent steriliser, please check on the website how to place the Natural bottle. Do not mix classic bottle parts and teats with parts of the Natural bottle. They may not fit and could cause leakage. The polypropylene Natural bottle is compatible with Philips Avent breast pumps, spouts, sealing discs and cup tops. The glass Natural bottle is compatible with Philips Avent breast pumps and sealing discs. For safety reasons, it is not recommended to use glass Natural bottles with handles, spouts and cup tops. If the bottle falls, it may break.Philips Avent is

GB ForyourchildssafetyandhealthWARNING!

Always use this product with adult supervision. Never use feeding teats as a soother. Continuous and prolonged sucking of fluids will cause tooth decay. Always check food temperature before feeding. Keep all components not in use out of the reach of children. Before first use, clean the product. Inspect before each use and pull the feeding teat in all directions. Throw away at the first signs of damage or weakness. Do not store a feeding teat in direct sunlight or heat, or leave in disinfectant (sterilising solution) for longer than recommended, as this may weaken the teat. Do not place in a heated oven. Before first use place in boiling water for 5 minutes. This is to ensure hygiene. Clean before each use. Wash and rinse thoroughly, then sterilise using a Philips Avent steriliser or boil for 5 minutes. Do not warm contents in a microwave oven, as this may cause uneven heating and could scald your baby. Dishwasher safe - food colourings may discolour components. Do not allow child to play with small parts or walk/run while using bottles or cups. Drinks other than milk and water, such as fruit juices and flavoured sugary drinks are not recommended. If used, they should be well diluted and only used for limited periods. Expressed breast milk can be stored in sterilised Philips Avent polypropylene bottles/containers in the refrigerator for up to 48 hours (not in the door) or in the freezer for up to 3 months. Never refreeze breast milk or add fresh breast milk to already frozen milk. Do not use abrasive cleaning agents or anti-bacterial cleaners. Do not place components directly on surfaces that have been cleaned with anti-bacterial cleaners. Excessive concentration of detergents may eventually cause plastic components to crack. Should this occur, replace immediately. Plastic material properties may be affected by sterilising and high temperatures. This can affect the fit of the cap.CleaningBefore first use, disassemble all parts, clean and sterilise the product. After every use, take all items apart, wash in warm soapy water and rinse thoroughly. Make sure that you wash your hands

www.philips.com/avent

Philips Consumer Lifestyle BV Tussendiepen 4, 9206 AD Drachten, Netherlands

Trademarks owned by the Philips Group. 2015 Koninklijke Philips N.V. All rights reserved

4213.354.3821.1 (08/15)

FSC

Do not use with glass bottle Nepouvejte se sklennou lahv Ne hasznlja vegbl kszlt cumisveggel Ne uporabljajte s stekleno stekleniko Nem jte koristiti sa s aklenom boicom Nu utilizai cu un biberon din sticl Nemojte da koristite sa staklenom flaicom

ITGB ES <

Manualsnet FAQs

If you want to find out how the Avent Philips works, you can view and download the Philips Avent SCD292/00 SCF332 Pump Set User Manual on the Manualsnet website.

Yes, we have the User Manual for Philips Avent as well as other Philips manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Philips Avent. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Philips Avent SCD292/00 SCF332 Pump Set User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Philips Avent SCD292/00 SCF332 Pump Set User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Philips Avent SCD292/00 SCF332 Pump Set User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Philips Avent SCD292/00 SCF332 Pump Set User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Philips Avent SCD292/00 SCF332 Pump Set User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.