Philips TAH5205WT/00 5000 Series Headphones User Manual PDF

1 of 14
1 of 14

Summary of Content for Philips TAH5205WT/00 5000 Series Headphones User Manual PDF

User manual Register your product and get support at

www.philips.com/support

5000 Series

TAH5205

Headphones

1 Important safety instructions 2 Hearing Safety 2 General information 2

2 Your Bluetooth over-ear headphones 3

What's in the box 3 Other devices 3 Overview of your Bluetooth wireless headset 4

3 Get started 5 Charge the battery 5 Pair the headphones with your mobile phone 5

4 Use your headphones 6 Connect the headphones to a Bluetooth device 6 Manage your calls and music 6

5 Technical data 8

6 Notice 9 Declaration of conformity 9 Disposal of your old product and battery 9 Remove the integrated battery 9 Compliance with EMF 9 Environmental information 10 Notice of compliance 10

7 Trademarks 11

7 Frequently asked questions 12

Contents

1 Important safety

instructions

Hearing Safety

Be sure to observe the following guide- lines when using your headset. Listen at reasonable volumes for

reasonable periods of time. Be careful not to adjust the volume

continuously upwards as your hearing adapts.

Do not turn up the volume so high that you can't hear what's around you.

You should use caution or tempo- rarily discontinue use in potentially hazardous situations.

Excessive sound pressure from earphones and headphones can cause hearing loss.

Using headphones with both ears covered while driving is not recom- mended and may be illegal in some areas while driving.

For your safety, avoid distractions from music or phone calls while in trac or other potentially dangerous environments.

General information

To avoid damage or malfunction:

About operating and storage temperatures and humidity Operate or store in a place where

temperature is between -10C (14F) and 60C (140 F) (up to 90% relative humidity.

Battery life may be shorter in high or low temperature conditions.

Danger

To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is.

Caution

Do not expose headphones and charging case to excessive heat.

Do not drop your headphones and charging case. Headphones and charging case shall not be

exposed to dripping , splashing water. Do not allow your headphones and charging case

to be submerged in water. Do not use any cleaning agents containing

alcohol, ammonia, benzene, or abrasives. If cleaning is required use a soft doth, if necessary

dampened with a minimum amount of water or diluted mild soap, to clean the product.

The integrated battery shall not be exposed to excessive heat such as sunshine, re or the like.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

2 Your Bluetooth over-ear headphones

What's in the box

Philips Bluetooth over-ear headphones Philips TAH5205

Quick start guide

Other devices

A mobile phone or device (e.g. note- book, PAD, Bluetooth adapters, MP3 players etc) which supports Bluetooth and is compatible to the headset (see 'Technical data' ).

Global Warranty

Safety leaet

Congratulations on your purchase, and welcome to Philips! To fully benet from the support that Philips oers, register your product at www.philips.com/welcome. With this Philips over-ear headphones, you can: enjoy convenient wireless handsfree calls; enjoy and control wireless music; switch between calls and music.

USB charging cable (for charging only)

Audio cable

Overview of your Bluetooth wireless headset

Volume + LED indicator

Volume -

Bass boost

(Power on / o / Pairing)

Music/Call control button

3.5mm jack

Microphone

USB Type C charging slot

3 Get started

Charge the battery

Note

Before you use your headset for the rst time, place the headsets in the charging case and charge the battery for 3 hours for optimum battery capacity and lifetime.

Use only the original USB charging cable to avoid any damage.

Finish your call before charging the headset, as connecting the headset for charging will power the headset o.

Connect the supplied USB charging cable to:

The Type - C USB charging slot on the headphones and;

The charger/USB port of a comput- er.

Tip

Normally, a full charge takes 2 hours.

Pair the headphones with your mobile phone

Make sure that the headphones are fully charged and turned o.

Make sure that the mobile phone is turned on and its Bluetooth feature is activated.

The headphone remain in pairing mode for 5 minutes.

Before you use the headphones with your mobile phone for the rst time, pair it with a mobile phone. A successful pairing establishes a unique encrypted link between the headphones and mobile phone. The headphones store the last 8 devices in the memory. If you try to pair more than 8 devices, the earliest paired device is replaced by the new one.

The following example shows you how to pair the headphones with your mobile phone.

LED turns white during charging and turns o when the headphones in fully charged.

Press and hold for 6 seconds until the blue and white LED ashes alternately.

Philips TAH5205

Pair the headphones with the mobile phone. For detailed infor- mation, refer to the user manual of your mobile phone.

Activate the Bluetooth feature of your mobile phone, select Philips TAH5205

4 Use your headset

Connect the headset to your Bluetooth device

Turn on your mobile phone/ Bluetooth device.

Press and hold the on/o button for 2 seconds to turn heaphones on.

The white LED will turn on .

The headphones are recon- nected to the last connected mobile phone/ Bluetooth device automatically.

Tip

If you turn on the mobile phone/Bluetooth device or activate the Bluetooth feature after turning on the headphones, you have to reconnect the headphones and mobile phone/ Bluetooth device manually.

If the headphones fail to connect to last connected Bluetooth device within range in 5 minutes, it will change to pairing mode, then will switch o automatically if its still not connected to any Bluetooth device 5 minutes later.

If the headphone has no any connection history and doesnt connect any Bluetooth device whith 5 minutes, it will switch o automatically.

Note

Manage your calls and music

On/o

Task Button Operation Turn the head- phones on.

On/o Press and hold for 2 seconds.

Turn the head- phones o.

On/o Press and hold for 4 seconds.

The white LED is on and fades out.

Music control

Task Button Operation music/call control

Play or pause music.

Press once.

Press to +/-

Press to + and hold 2s

Adjust volume.

Next track.

Previous track. Press to - and hold 2s

Switch between calls

music/ call control

Press 3 times

Hold current call and reject an incoming call Reject current call and accept an incoming call

music/ call control

music/ call control

Press and hold 2 s

Press twice

Reject a call

Hold current call and accept an incoming call

music/ call control

music/ call control

Press and hold 2 s

Press once

Other headphones indicator status

Headphones status Indicator The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music.

The blue LED will ash every 4s

The headphones are ready for pairing.

The LED ashes blue and white alternately.

The headphones are on but not connected to a Bluetooth device.

The Blue LED ashes slowly. If no connection can be made, the headphones will turn itself o within 5 minutes.

Low battery level. The white LED ash until it is out of power

Battery is fully charged.

White LED is o.

Call control

Task Button Operation Pick up/ hang up a call.

Switch caller during a call.

music/ call control

music/ call control

Press once.

Voice assistant

Task Button Operation Wake up the default voice assistant

music/ call control

Press twice

Press twice.

5 Technical data

Note

Specications are subject to change without notice.

Headset Music time: 29 hours (Bass Boost o) Talk time: 21 hours Standby time: 166 hours Charging time: 2 hours Rechargeable lithium polymer battery (250 mAh) Bluetooth version: 5.0 Compatible Bluetooth proles: HFP (Hands-Free Prole) A2DP (Advanced Audio Distri-

bution Prole) AVRCP (Audio Video Remote

Control Prole) Supported audio codec: SBC Frequency range: 2.402-2.480 GHz Transmitter power: < 10 dBm Operating range: Up to 10 meters (33 feet) Digital echo & noise reduction Auto power o Type-C USB port for charging Low battery warning: available

Remove the integrated battery

6 Notice

Hereby, MMD Hong Kong Holding Limited declares that this product is in compli- ance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can nd the Declaration of Conformity on www.p4c.philips.com.

Declaration of conformity

Disposal of your old product and battery

Your product is designed and manufac- tured with high quality materials and components, which can be recycled and reused.

This symbol on a product means that the product is covered by European Directive 2012/19/EU.

This symbol means that the product contains a built-in rechargeable battery covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product to an ocial collection point or a Philips service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environ- ment and human health.

If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones. Make sure the headset is discon-

nected from the charging case before removing the battery.

Compliance with EMF This product complies with all applica- ble standards and regulations regarding exposure to electromagnetic elds.

Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassem- bled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Notice of compliance The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

FCC rules

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between equipment and receiver Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Canada: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence- exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) This device must accept any interfer- ence received, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B)

IC Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Caution: The user is cautioned that changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

7 Trademarks

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Top Victory Investment Limited is under license. Other trademarks and trade names are those of their respec- tive owners.

Bluetooth

8 Frequently asked questions

My Bluetooth headset does not turn on. The battery level is low. Charge the headset.

I cannot pair my Bluetooth headset with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headset.

How to reset pairing. Let headphone stay in pairing mode (red and blue lights ash alternately), push the power button up to + and hold more than 6 seconds until purple LED light on.

I hear but cannot control music on my Bluetooth device (e.g. play/pause/skip forward/backward). Make sure the Bluetooth audio source supports AVRCP (see Technical data).

The volume level of the headset is too low. Some Bluetooth devices cannot link the volume level with the headset through volume sync. In this case, you have to adjust the volume on your Bluetooth device independently to achieve an appropriate volume level.

The Bluetooth device cannot nd the headset. The headset may be connected to a previously paired device. Turn o the connected device or move it out of range. Pairing may have been reset or the headset has been previously paired with another device. Pair the headset with the Bluetooth device again as described in the user manual. (see Pair the headset with your Bluetooth device at the rst time on page 6).

My Bluetooth headset is connected to a Bluetooth stereo enabled mobile phone, but music only plays on the mobile phone speaker. Refer to the user manual of your mobile phone. Select to listen to music through the headset.

The audio quality is poor and crackling noise can be heard. The Bluetooth device is out of range. Reduce the distance between your headset and Bluetooth device, or remove obstacles between them. Charge your headset.

For further support, visit www.philips.com/support.

APP DOWNLOAD Scan the QR code/press 'Download' button

or search 'Philips Headphones' in Apple App Store or Google Play to download App.

Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its aliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.

UM_TAH5205_00_EN_V1.0

Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia

Manualsnet FAQs

If you want to find out how the 5000 series Philips works, you can view and download the Philips TAH5205WT/00 5000 Series Headphones User Manual on the Manualsnet website.

Yes, we have the User Manual for Philips 5000 series as well as other Philips manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Philips 5000 series. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Philips TAH5205WT/00 5000 Series Headphones User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Philips TAH5205WT/00 5000 Series Headphones User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Philips TAH5205WT/00 5000 Series Headphones User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Philips TAH5205WT/00 5000 Series Headphones User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Philips TAH5205WT/00 5000 Series Headphones User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.