- Manuals
- Brands
- Philips
- Headlights
- Ultinon Pro
- User Manual
Philips Ultinon Pro 11012U90CWX2 H1 Headlights User Manual PDF
Summary of Content for Philips Ultinon Pro 11012U90CWX2 H1 Headlights User Manual PDF
User Manual
3GB User Manual
LED-HL
Ultinon Pro
15
28JA
41KO
54
GB Thank you very much for purchasing this product. To facilitate long-term use, please carefully read this User Manual before use. After reading, keep the User Manual safe so that it is available for use at any time.
Table of Content Packaging List..................................................................................................................................3
Important Information...................................................................................................................3
Installation for H4 and H7............................................................................................................5
Installation for FOG, H11, HIR2, HB3 and HB4.....................................................................6
Centre ring adjustment..................................................................................................................8
Centre ring alignment of HIR2, HB3, HB4, H11 and FOG...................................................8
Precautions H11 and FOG.......................................................................................................................10
Installation for H1 and H3..........................................................................................................................11
Correct beam performance.............................................................................................................13
Troubleshooting...................................................................................................................................13
Recycling, Warranty and Service..................................................................................................14
3
G B
Packing list
Please read these instructions carefully before installing the Ultinon Pro lamp.
Precautions Before installing the Ultinon Pro lamps, please ensure that the lamps are not damaged or
broken, and have not fallen on the ground. If any of these conditions exist, please do not install the LED bulbs onto your vehicle.
The temperature of the Ultinon Pro lamps burner can be very high. Do not place flammable materials, such as paper, cloth, or other materials, close to the LED bulb.
Keep the LED bulb out of areas that are exposed to flames or prone to combustion, such as gas or petrol stations.
Keep the LED bulb out of areas with high amounts of dust.
1
Important2
Ultinon Pro lamps burners with heat sink x 2
Item Description
Drivers x 2
Hex Key x 1
Plastic Tie x 8
Additional HB4 O-Ring x 2
Product Manual x1
H7, H4 H11, FOG & HIR2
HB3 H1, H3 HB4
4
Warning The burner body and LED surface can reach very high temperatures. Do not touch the
area with the hands or allow any skin contact as it may result in severe burns. Do not touch the LED ribbon bonding area! (Refer to picture below)
The LED light intensity is very high while turned on. Do not look directly into the beam to avoid damage to the eyes.
Do not wash the vehicle when the headlights are turned on. Changes in temperature may cause damage to or an unexpected reaction from the LED headlight.
Do not expose the surface of the LED bulb to dust or oils, or cause the surface to bear shock or otherwise become damaged.
Keep out of reach of children.
Warning Do not touch this area
Other Information
Please ensure that the product comes from a legal sales channel.
After installation, check that the high and low beams, the flash function, and other electrical equipment on the dashboard work and that no warnings occur. If anything abnormal happen, Philips LED CANbus adapter could be a solution.
After installation, ensure that the waterproof gasket is fitted correctly to reduce the risk of leakage. Do not bend the cables excessively, especially near the heat sink area.
5
Twist and pull off the center ring
Install and fixate center ring in headlamp
Insert and fixate LED bulb by rotating until end stop
Installation steps for H4 and H73
1
2
*locked*
6
Connect power line
Optional and only for H7 Beam pattern can be optimized by rotating LED bulb, LED PCB should be vertical
Installation for FOG, H11, HIR2, HB3, HB4
Install the bulb inside the luminaire.
7
Rotate the heatsink
Connect the plug to the power socket
If the original installed bulb is HB4 bulb type; please replace the red o-ring with the black o-ring. (HB4 = black o-ring; HB3 = red o-ring)
8
Centre ring adjustment target
Bulb not perpendicular (Not preferred)
Screw inwards the two reference screws with the Hex key.
Centre Ring alignment of HIR2, HB3, HB4, H11 and FOG
Illumination orientation of the right LED
Illumination orientation of
the left LED
If the bulb is not in vertical position inside the luminaire, please follow below instruction for adjusting centre ring angle.
Make sure the LED emit light to the left and right, burner is in vertical position
Hex Key
9
Rotate burner over the centre ring
Screw outwards the two reference screws.
For easy adjustment and easy screwing out it is necessary to apply force to pull the centre ring downwards.
Bulb perpendicular (Preferred)
10
Precautions for H11 / FOG
Do not dissemble. Risk of small component (spring) coming loose
Do not dissemble. Special tools are required for re-assembly
Keep centre ring pressed towards the heatsink and the burner.
11
Installation for H1 and H3
Fix the driver box inside the luminaire firstly.
Screw out the heatsink from the burner
Screw top should be same height as centre ring surface after the adjustment
12
Fix the burner onto the luminaire.
Screw on the heatsink onto the burner.
Connect the cable between driver to burner and driver to power socket.
*click*
1 2
3 A H1
13
Correct beam performance
Troubleshooting4 If the Ultinon Pro fails to operate, please perform the following actions:
1. Check that the power connectors are well connected.
2. Ensure that the vehicle headlight switch is in the ON position.
3. Ensure that the vehicle battery has enough power to power the Ultinon Pro
Correct beam with clear cut-off: Superior visibility in farfield. Reduced glaring, enhancing driver and traffic safety
14
If you have any problems with the product or need service or need information, please visit www.philips.com/automotive or contact the Philips call center in your country. If there is no call center in your country, please consult your local Philips dealer.
Warranty terms Philips does not warrant its goods against any defect or damage caused by transportation, storage, improper installation, maintenance, internal or external hostile environment, misuse, abuse, negligence, accident, modification, tampering, the attachment of any unauthorized accessory, alteration to the goods, or any other conditions whatsoever that do not constitute a defect in material and/or workmanship.Philips sole responsibility under this warranty shall be, at its option, to either repair or replace any goods which fail during the warranty period, provided that Buyer has promptly reported same to Philips in writing, and complies with the provisions of this Warranty.
In case of warranty claim, please provide the following information together with proof of purchase:
Name__________________________ address___________________________________________
Phone_________________________ postal code________________________________________
Purchased from: (please provide name and location of retail outlet) ____________________________________________________________________________________
Warranty and Service6
Recycling5 Your product is designed and manufactured with high quality material and components that can be recycled and reused. The following symbol attached to the product signifies that the product is covered by the European Directive 2002/96/EC.
Never dispose of the product with other waste. Please inquire about the local regulations about the separated collection of electrical and electronic prod- ucts. The correct disposal of used old products helps prevents potentially negative consequences on the environment and human health.
16
16
H4 H7 18
FOGH11HIR2HB3 HB4 19
21
HIR2HB3HB4H11 FOG 21
H11 FOG 23
H1 H3 24
26
26
27
16
Ultinon Pro
Ultinon Pro LED
Ultinon Pro () LED
LED
LED
1
2
Ultinon Pro x 2
x 2
x 1
x 8
HB4 O x 2
x1
H7H4 H11FOG HIR2
HB3 H1H3 HB4
17
LED LED ()
LED
LED
LED
LED CANbus
18
LED
H4 H7 3
1
2
*locked*
19
H7 LED LED PCB
FOGH11HIR2HB3HB4
20
HB4 O O (HB4 = O HB3 = O )
21
()
HIR2HB3HB4H11 FOG
Illumination orientation of the right LED
Illumination orientation of
the left LED
LED
22
()
23
H11 / FOG
()
24
H1 H3
25
*click*
1 2
3 A H1
26
4 Ultinon Pro 1. 2. 3. Ultinon Pro
27
www.philips.com/automotive / /
/
__________________________ __________________________________________________
_________________________ _______________________________________________
()__________________________________________________ __________________________________
6
5 2002/96/EC
JA
29
29
H4 H7 31
H11HIR2HB3HB4 32
34
HIR2HB3HB4H11 34
H11 36
H1 H3 37
39
39
40
29
JA
Ultinon Pro
Ultinon Pro
LED
Ultinon Pro LED
LED
LED
1
2
Ultinon Pro x 2
x 2
x 1
x 8
HB4 O x 2
x 1
H7H4 H11 HIR2
HB3 H1H3 HB4
30
LED
LED LED
LED
LED
LED
LED CANbus
31
LED
H4 H7 3
1
2
*locked*
32
H7 - LED LED PCB
H11HIR2HB3HB4
33
HB4 O O
HB4 = O HB3 = O
34
2
HIR2HB3HB4H11
Illumination orientation of the right LED
Illumination orientation of
the left LED
LED
35
2
36
H11
37
H1 H3
38
*click*
1 2
3 A H1
39
4 Ultinon Pro 1. 2. ON 3. Ultinon Pro
40
www.philips.com/automotive
_______________________ ___________________________________________________
___________________ _______________________________________________
____________________________________________________________________________________
6
5 2002/96/EC
KO . . .
42
42
H4 H7 44
FOG, H11, HIR2, HB3, HB4 45
47
HIR2, HB3, HB4, H11, FOG 47
H11 FOG 49
H1 H3 50
52
52
, , 53
42
K O
Ultinon Pro .
Ultinon Pro , . LED .
Ultinon Pro . , LED .
LED (: ) .
LED .
1
2
Ultinon Pro ( ) x 2
x 2
x 1
x 8
HB4 O-Ring x 2
x1
H7, H4 H11, FOG, HIR2
HB3 H1, H3 HB4
43
LED . . LED ! ( )
LED . .
. LED .
LED .
.
.
, , , . LED CANbus .
. .
44
LED
H4 H7 3
1
2
*locked*
45
H7 LED . LED PCB
FOG, H11, HIR2, HB3, HB4
.
46
HB4 O- O- . (HB4 = O-, HB3 = O-)
47
( )
.
HIR2, HB3, HB4, H11 FOG
Illumination orientation of the right LED
Illumination orientation of
the left LED
.
LED
48
.
.
()
49
H11/FOG
. ()
.
.
50
H1 H3
.
51
.
.
, .
*click*
1 2
3 A H1
52
4 Ultinon Pro .
1. .
2. "ON" .
3. Ultinon Pro
53
www.philips.com/automotive . .
, , , , , , , , , , , , / . .
.
__________________________ _________________________________________________
_________________________ ____________________________________________
: ( ) ____________________________________________________________________________________
6
5 . 2002/96/EC .
. . .
55
55
H4 H7 57
FOGH11HIR2HB3 HB4 58
60
HIR2HB3HB4H11 FOG 60
H11 FOG 62
H1 H3 63
65
65
66
55
Ultinon Pro
Ultinon Pro
LED
Ultinon Pro LED
LED
LED
1
2
Ultinon Pro x 2
x 2
x 1
x 8
HB4 O x 2
x 1
H7H4 H11FOG HIR2
HB3 H1H3 HB4
56
LED
LED
LED
LED
LED
Philips LED CANbus
57
LED LED
H4 H7 3
1
2
*locked*
58
H7 LED LED
FOGH11HIR2HB3HB4
59
HB4 O O HB4 = O HB3 = O
60
HIR2HB3HB4H11 FOG
Illumination orientation of the right LED
Illumination orientation of
the left LED
LED
61
62
H11/FOG
63
H1 H3
64
*click*
1 2
3 A H1
65
4 Ultinon Pro
1.
2.
3. Ultinon Pro
66
www.philips.com/automotive / /
/
__________________________ _________________________________________________
_________________________ _____________________________________________
____________________________________________________________________________________
6
5 2002/96/EC
3241 103 11451
Lumileds is the warrantor of this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. 2020 Lumileds Holding B.V. All rights reserved.
Philips Philips Shield Emblem Koninklijke Philips N.V. 2020 Lumileds Holding B.V. All rights reserved.
Lumileds Philips Philips Koninklijke Philips N.V. 2020 Lumileds Holding B.V.
Lumileds . Koninklijke Philips N.V. . 2020 Lumileds Holding B.V. All rights reserved.
Lumileds
Related manuals for Philips Ultinon Pro 11012U90CWX2 H1 Headlights User Manual
Manualsnet FAQs
If you want to find out how the Ultinon Pro Philips works, you can view and download the Philips Ultinon Pro 11012U90CWX2 H1 Headlights User Manual on the Manualsnet website.
Yes, we have the User Manual for Philips Ultinon Pro as well as other Philips manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The User Manual should include all the details that are needed to use a Philips Ultinon Pro. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Philips Ultinon Pro 11012U90CWX2 H1 Headlights User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Philips Ultinon Pro 11012U90CWX2 H1 Headlights User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Philips Ultinon Pro 11012U90CWX2 H1 Headlights User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Philips Ultinon Pro 11012U90CWX2 H1 Headlights User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Philips Ultinon Pro 11012U90CWX2 H1 Headlights User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.