Philips TAT2206WT/00 2000 Series Earphones User Manual PDF

1 of 17
1 of 17

Summary of Content for Philips TAT2206WT/00 2000 Series Earphones User Manual PDF

2000 Series

Headphones

TAT2206

User manual Register your product and get support at

www.philips.com/support

1 Important safety instructions 2 Hearing Safety 2 General information 2

2 Your True wireless earphones 3

What's in the box 3 Other devices 3 Overview of your True wireless

earphones 4

3 Get started 5 Charge the battery 5 Pair the earphones with your

Bluetooth device for the rst time 5 Pair the earphones with another

Bluetooth device 6

4 Use your headphones 7 Connect the earphones to your

Bluetooth device 7 Power on/o 7 Manage your calls and music 7 LED indicator status 8 Voice Assistant 8

5 Reset the earphones 9

6 Technical data 10

7 Notice 11 Declaration of conformity 11 Disposal of your old product and battery 11 Remove the integrated battery 11 Compliance with EMF 12 Environmental information 12 Notice of compliance 12

8 Trademarks 14

9 Frequently asked questions 15

Contents

1 Important safety

instructions

Hearing Safety

Danger

To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is.

Be sure to observe the following guide- lines when using your earphones. Listen at reasonable volumes for

reasonable periods of time. Be careful not to adjust the volume

continuously upwards as your hearing adapts.

Do not turn up the volume so high that you can't hear what's around you.

You should use caution or tempo- rarily discontinue use in potentially hazardous situations.

Excessive sound pressure from earphones and headphones can cause hearing loss.

Using headphones with both ears covered while driving is not recom- mended and may be illegal in some areas while driving.

For your safety, avoid distractions from music or phone calls while in trac or other potentially dangerous environments.

General information

To avoid damage or malfunction:

Caution

Do not expose headphones to excessive heat. Do not drop your headphones. Headphones shall not be exposed to dripping

, splashing water. Do not allow your headphones to be

submerged in water. Do not use any cleaning agents containing

alcohol, ammonia, benzene, or abrasives. If cleaning is required use a soft doth, if

necessary dampened with a minimum amount of water or diluted mild soap, to clean the product.

The integrated battery shall not be exposed to excessive heat such as sunshine, re or the like.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion;

Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of ammable liquid or gas;

A battery subjected to extremely low air pressure that may result in an explosion or the leakage of ammable liquid or gas.

About operating and storage temperatures and humidity Store in a place where temperature is

between -20C (-4F) and 50C (122 F) (up to 90% relative humidity.

Operate in a place where temperature is between 0C (32F) and 45C (113 F) (up to 90% relative humidity.

Battery life may be shorter in high or low temperature conditions.

Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);

2 Your True wireless earphones

What's in the box

Philips True wireless earphones Philips TAT2206

Replaceable rubber ear caps x 3 pairs

Quick start guide

Other devices

A mobile phone or device (e.g. note- book, tablet, Bluetooth adapters, MP3 players etc) which supports Bluetooth and is compatible to the earphones (see 'Technical data' on page 8).

Congratulations on your purchase, and welcome to Philips! To fully benet from the support that Philips oers, register your product at www.philips.com/welcome. With this Philips True wireless earphones, you can: enjoy convenient wireless handsfree calls; enjoy and control wireless music; switch between calls and music.

USB-C charging cable (for charging only)

Global Warranty

Safety leaet

Overview of your True wireless earphones

LED indicator (Earphones)

Multi-function button

Microphone

LED indicator (charging box)

USB-C charging slot

3

1

2

4

5

3 Get started

Charge the battery

Charging

Note

Before you use your earphones for the rst time, place the earphones in the charging box and charge the battery for 2 hours for optimum battery capacity and lifetime.

Use only the original USB-C charging cable to avoid any damage.

Finish your call before charging the earphones, as connecting the earphones for charging will power the earphones o.

Connect one end of the USB cable into the charging box, and another end into the power source.

Charging process is veried by the LED light on the front panel.

When the charging box is fully charged, the light goes o.

Tip

The charging box serves as a portable backup battery for charging the earphones. When the charging box is fully charged, it supports 2 times full recharge cycle for the earphones.

Normally, a full charge takes 2 hours (for the earphones or charging box) by USB cable.

The LED on both earphones ash in white & blue alternately.

The charging box starts charging.

Pair the earphones with your Bluetooth device for the rst time

Open the top cover from charging box.

Make sure that the earphones is fully charged.

Note

After powering on, if the earphones cannot nd any previously connected Bluetooth device, it will automatically switch to pairing mode.

The earphones are now in pairing mode and is ready to pair with a Bluetooth device (e.g. a mobile phone)

Turn on the Bluetooth function of your Bluetooth device.

Pair the earphones with your Bluetooth device. Refer to the user manual of your Bluetooth device.

1

2

3

4

Single earpiece (Mono mode)

Take either right or Left earpiece out from charging box for Mono use. The earpiece will power on automatically. There will be a voice Power on from earpiece.

Note

Note

Take the second earpiece from the charging box and they will pair each other automatically.

The earphones store 4 device in the memory. If you try to pair more than 4 devices, the earliest paired device is replaced by the new one.

Pair the earphones with another Bluetooth device

Turn on the Bluetooth function of your Bluetooth device, select Philips TAT2206.

The following example shows you how to pair the earphones with your Bluetooth device.

If you have another Bluetooth device that you want to pair with the earphones, make sure the Bluetooth function in any other previously paired or connected devices are turned o. Press and hold over 5 seconds both left & right side simultaneously with earpiece on ear, release when Pairing voice prompt is heard.

Enter the earphones password 0000 (4 zeros) if prompted. For those Bluetooth devices featuring Bluetooth 3.0 or higher, no need to enter a password.

Philips TAT2206

1

2

Tip

Note

The earphones cannot connect to more than 1 device at the same time. If you have two paired Bluetooth devices, only turn on the Bluetooth function of the device that you want to connect.

If you turn on the Bluetooth function of your Bluetooth device after turning on the earphones, you have to go to the Bluetooth menu of the device and connect the earphones to the device manually.

If the earphones fail to connect to any Bluetooth device within 3 minutes, it will turn o automatically to save the battery life.

In some Bluetooth devices, connection may not be automatic. In this case, you have to go to the Bluetooth menu of your device and connect the earphones to the Bluetooth device manually.

The blue LED ashes.

The earphones will search the last connected Bluetooth device and reconnect to it automatical- ly. If the last connected device is not available, the earphones will enter pairing mode.

4 Use your headphones

Turn on the Bluetooth function of your Bluetooth device.

Task

Turn the earphones on

Open charging case's lid

Earpiece put back to charging box and close the lid

Turn the earphones o

Open the top cover from charging box.

Connect the earphones to your Bluetooth device

Power on/o

Multi- function button

Operation

Music control

Play or pause music

Skip forward Right / Left earpiece

Right / Left earpiece

Double taps

Skip backward

Triple taps

Adjust volume +/-

Via mobile phone control

Right / Left earpiece

Single tap

Manage your calls and music

Task Multi- function button

Operation

1

2

Switch call during 3-way call

Right / Left earpiece

triple taps

Call control

Pick up/ Hang up Call

Reject an incoming call

Right / Left earpiece

Tap and hold

Right / Left earpiece

single tap

Task Multi- function button

Operation

LED indicator status

The earphones are connected to a Bluetooth device

The earphones are ready for pairing

The earphones are on but not connected to a Bluetooth device

Low battery level (earphones)

Blue LED blink 2x every 5s

The blue & white LED ash alternately

White LED blink every 1s (auto turn o after 3min)

Blue LED ashes

Headphones status

Indicator

Battery is fully charged (charging box)

LED will be o

Task Button Operation Right / Left earpiece

Trigger voice (Siri/Google) assistant

Tap and hold 2 seconds

Voice Assistant

When charging Indicator

Battery low

Relative adequate battery

O

Amber LED light up

Battery low

Relatively adequate battery

White LED light up

Amber LED light up

In use and cover is open

Indicator

5 Reset the earphones

TAT2206

Press once on both earphones, and then press and hold for 5 seconds.

Follow steps in Use your earphones-Connect the earphones to your Bluetooth device.

Pair the earphones with your Bluetooth device, select Philips TAT2206.

5

1

2

3

6 Technical data

Note

Specications are subject to change without notice.

Music time: 6 hours Talk time: 6 hours Standby time 200 hours Charging time: 2 hours Lithium-ion battery 55 mAh on each earpiece, Lithium-ion battery 350mAh on charging box Bluetooth version: 5.0 Compatible Bluetooth proles: HFP (Hands-Free Prole) A2DP (Advanced Audio Distri-

bution Prole) AVRCP (Audio Video Remote

Control Prole) Supported audio codec: SBC Frequency range: 2.402-2.480GHz Transmitter power: < 10 dBm Operating range: Up to 10 meters (33 feet) Auto power o USB-C port for charging Low battery warning: available

7 Notice

Hereby, MMD Hong Kong Holding Limited declares that this product is in compli- ance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can nd the Declaration of Conformity on www.p4c.philips.com.

Declaration of conformity

Disposal of your old product and battery

Your product is designed and manufac- tured with high quality materials and components, which can be recycled and reused.

This symbol on a product means that the product is covered by European Directive 2012/19/EU.

This symbol means that the product contains a built-in rechargeable battery covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product to an ocial collection point or a Philips service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environ- ment and human health.

Remove the integrated battery

If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones. Make sure the earphones is discon-

nected from the charging box before removing the battery.

Make sure the charging box is disconnected from the USB charging cable before removing the battery.

Compliance with EMF This product complies with all applica- ble standards and regulations regarding exposure to electromagnetic elds.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassem- bled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Notice of compliance

The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

FCC rules

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between equipment and receiver Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Canada: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Develop- ment Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device.

Caution: The user is cautioned that changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

IC Radiation Exposure Statement:

This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) Lappareil ne doit pas produire de brouillage; (2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. CAN ICES-3(B)/NMB-3(B)

8 Trademarks

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trade- marks and trade names are those of their respective owners.

Bluetooth

Siri is a trademark of Apple Inc., regis- tered in the U.S. and other countries.

Siri

Google and Google Play are trademarks of Google LLC.

Google

9 Frequently asked questions

My Bluetooth earphones do not turn on. The battery level is low. Charge the earphones.

I cannot pair my Bluetooth earphones with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the earphones.

Pairing does not work. Put both earphones into charging box. Make sure you have disabled the Bluetooth function of any previously connected Bluetooth devices. On your Bluetooth device, delete Philips TAT2206 from the Bluetooth list. Pair your earphones (see Pair the earphones with your Bluetooth device for the rst time on page 5).

The Bluetooth device cannot nd the earphones. The earphones may be connected to a previously paired device. Turn o the connected device or move it out of range. Pairing may have been reset or the earphones have been previously paired with another device. Pair the earphones with the Bluetooth device again as described in the user manual. (see Pair the earphones with your Bluetooth device for the rst time on page 5).

My Bluetooth earphones are connected to a Bluetooth stereo enabled mobile phone, but music only plays on the mobile phone speaker. Refer to the user manual of your mobile phone. Select to listen to music through the earphones.

The audio quality is poor and crackling noise can be heard. The Bluetooth device is out of range. Reduce the distance between your earphones and Bluetooth device, or remove obstacles between them. Charge your earphones.

The audio quality is poor when streaming from the mobile phone is very slow, or audio streaming does not work at all. Make sure your mobile phone not only supports (mono) HSP/HFP but also supports A2DP and is BT4.0x (or higher) compatible (see Technical data on page 10).

My Bluetooth earphones won't pair and won't respond. Put earphones into the charging box. Reset your earphones. See "Reset the earphones" on page 9.

Philips and the Philips Shield Embl

Manualsnet FAQs

If you want to find out how the 2000 Series Philips works, you can view and download the Philips TAT2206WT/00 2000 Series Earphones User Manual on the Manualsnet website.

Yes, we have the User Manual for Philips 2000 Series as well as other Philips manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Philips 2000 Series. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Philips TAT2206WT/00 2000 Series Earphones User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Philips TAT2206WT/00 2000 Series Earphones User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Philips TAT2206WT/00 2000 Series Earphones User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Philips TAT2206WT/00 2000 Series Earphones User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Philips TAT2206WT/00 2000 Series Earphones User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.