Philips TAA5205BK/00 TAA5205 Earphones User Manual PDF

1 of 17
1 of 17

Summary of Content for Philips TAA5205BK/00 TAA5205 Earphones User Manual PDF

User manual Register your product and get support at

www.philips.com/support

TAA5205

5000 Series

Headphones

1 Important safety instructions 2 Hearing Safety 2 General information 2

2 Your True wireless earpieces 3

What's in the box 3 Other devices 3 Overview of your True wireless

earpieces 4

6 Technical data 10

7 Notice 11 Declaration of conformity 11 Disposal of your old product and battery 11 Remove the integrated battery 11 Compliance with EMF 12 Environmental information 12 Notice of compliance 12

8 Trademarks 14

9 Frequently asked questions 15

Contents

3 Get started 5 Charge the battery 5 Pair the earpieces with your Bluetooth device at the rst time 6 Pair the earpieces with another Bluetooth device 7

4 Use your earpieces 7 Connect the earpieces to your

Bluetooth device 7 Power on/o 8 Manage your calls and music 8 LED indicator status 8 How to wear 9

5 Reset the earpieces 10

1 Important safety

instructions

Hearing Safety

Danger

To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is.

Be sure to observe the following guide- lines when using your headset. Listen at reasonable volumes for

reasonable periods of time. Be careful not to adjust the volume

continuously upwards as your hearing adapts.

Do not turn up the volume so high that you can't hear what's around you.

You should use caution or tempo- rarily discontinue use in potentially hazardous situations.

Excessive sound pressure from earpieces and headphones can cause hearing loss.

Using headphones with both ears covered while driving is not recom- mended and may be illegal in some areas while driving.

For your safety, avoid distractions from music or phone calls while in trac or other potentially dangerous environments.

General information

To avoid damage or malfunction:

Caution

Do not expose headphones to excessive heat Do not drop your headphones. Headphones shall not be exposed to dripping

, splashing water. Do not allow your headphones to be

submerged in water. Do not use any cleaning agents containing

alcohol, ammonia, benzene, or abrasives. If cleaning is required use a soft doth, if

necessary dampened with a minimum amount of water or diluted mild soap, to clean the product.

The integrated battery shall not be exposed to excessive heat such as sunshine, re or the like.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion;

Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of ammable liquid or gas;

A battery subjected to extremely low air pressure that may result in an explosion or the leakage of ammable liquid or gas.

About operating and storage temperatures and humidity Store in a place where temperature is

between -20C (-4F) and 50C (122 F) (up to 90% relative humidity.

Operate in a place where temperature is between 0C (32F) and 45C (113 F) (up to 90% relative humidity.

Battery life may be shorter in high or low temperature conditions.

Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);

2 Your True wireless earpieces

What's in the box

Philips True wireless earpieces Philips TAA5205

Replaceable rubber ear caps x 3 pairs

Quick start guide

Other devices

A mobile phone or device (e.g. note- book, PAD, Bluetooth adapters, MP3 players etc) which supports Bluetooth and is compatible to the earpieces (see 'Technical data' on page 10).

Congratulations on your purchase, and welcome to Philips! To fully benet from the support that Philips oers, register your product at www.philips.com/support. With this Philips True wireless earpiec- es, you can: enjoy convenient wireless handsfree calls; enjoy and control wireless music; switch between calls and music.

USB-C charging cable (for charging only)

Global Warranty

Safety leaet

Overview of your True wireless earpieces

LED indicator (Earpieces)

Microphone

Multi-function touch

LED indicator (charging box)

USB-C charging slot

3 Get started

Charge the battery

Charging Box

Earpieces

Note

Before you use your earpieces for the rst time, place the earpieces in the charging box and charge the battery for 3 hours for optimum battery capacity and lifetime.

Use only the original USB-C charging cable to avoid any damage.

Finish your call before charging the earpieces, as connecting the earpieces for charging will power the earpieces o.

Connect one end of the USB cable into the charging box, and another end into the power source.

Charging process is veried by the white LED light on the front panel.

When the charging box is fully charged, the blue light goes on.

Charging process is veried by white LED light on the earpieces.

When the earpieces is fully charged, the white light goes o.

Tip

Tip

The charging box serves as a portable backup battery for charging the earpieces. When the charging box is fully charged, it supports 3 times full recharge cycle for the earpieces.

Normally, a full charge takes 2 hours (for the earpieces or charging box) by USB cable.

Place the earpieces in the charging box. The earpieces start charging.

The charging box starts charging.

The LED on both earpieces ash in white & blue alternately.

Pair the earpieces with your Bluetooth device for the st time

Open the top cover from charging box.

Make sure that the headset is fully charged and powered o.

Single earpiece (Mono mode)

Take either right or Left earpiece out from charging box for Mono use. The earpiece will power on automatically. There will be a voice Power on from earpiece.

Note

Note

After powering on, if the earpieces cannot nd any previously connected Bluetooth device, it will automatically switch to pairing mode.

Note

Take the second Earpiece from the charging box and they will pair each other automatically.

The earpieces stores 4 device in the memory. If you try to pair more than 4 devices, the earliest paired device is replaced by the new one.

Pair the earpieces with another Bluetooth device

The earpieces are now in pairing mode and is ready to pair with a Bluetooth device (e.g. a mobile phone)

Turn on the Bluetooth function of your Bluetooth device, select Philips TAA5205.

Turn on the Bluetooth function of your Bluetooth device.

Pair the earpieces with your Bluetooth device. Refer to the user manual of your Bluetooth device.

The following example shows you how to pair the earpieces with your Bluetooth device.

If you have another Bluetooth device that you want to pair with the earpieces, make sure the Bluetooth function in any other previously paired or connected devices are turned o. Long touch over 5 seconds both left & right side simultaneously with earpiece on ear, release when Pairing voice prompt is heard.

Enter the earpieces password 0000 (4 zeros) if prompted. For those Bluetooth devices featuring Bluetooth 3.0 or higher, no need to enter a password.

Philips TAA5205

Tip

Note

The earpieces cannot connect to more than 1 device at the same time. If you have two paired Bluetooth devices, only turn on the Bluetooth function of the device that you want to connect.

If you turn on the Bluetooth function of your Bluetooth device after turning on the earpieces, you have to go to the Bluetooth menu of the device and connect the earpieces to the device manully.

If the earpieces fails to connect to any Bluetooth device within 5 minutes, it will turn o automatically to save the battery life.

In some Bluetooth devices, connection may not be automatic. In this case, you have to go to the Bluetooth menu of your device and connect the earpieces to the Bluetooth device manually.

The blue LED ashes.

The earpieces will search the last connected Bluetooth device and reconnect to it automatical- ly. If the last connected device is not available, the earpieces will enter pairing mode.

4 Use your earpieces

Turn on the Bluetooth function of your Bluetooth device.

Open the top cover from charging box.

Connect the earpieces to your Bluetooth device

Task

Turn the earpieces on.

Earpiece take out from charging box to power on

Earpiece put back to charging box to power o

Turn the earpieces o.

Power on/o

Multi- function button

Operation

Adjust volume +/-

Via mobile phone control

Manage your calls and music

Call control

Pick up/ Switch caller during a call

Hang up call /Reject call

Right earpiece

Tap and hold

Right earpiece

Double taps

Task Multi- function button

Operation

LED indicator status

The earpieces are connected to a Bluetooth device. The earpieces are ready for pairing

The earpieces are on but not connected to a Bluetooth device

Low battery level (earpieces)

Blue LED blink 2x every 5s

The blue & white LED ash alternately

White LED blink every 1s (auto turn o after 3min)

White LED blink every 5s

Headphones status

Indicator

Battery is fully charged (charging box).

Refer to Case LED

Music control

Play or pause music

Skip forward Right /Left earpiece

Double taps

Skip backward

Right earpieces

Triple taps

Right/Left earpiece

Single tap

Task Multi- function button

Operation

Battery LED indicator on Bluetooth device

It will show a battery indicator on Bluetooth device after connected to earpieces.

Task Button Operation Left/Right earpiece

Trigger voice (Siri/Google) assistant

Tap and hold 2 seconds

Voice Assistant

How to wear

Charging Box (4 blue LED) Charging Box LED (USB on)

Indicator

Continue to lit as long as USB is on

Tip

When USB is o, the LED is lit for 30s after case open or closed

Charging Box LED (USB o)

Indicator

5 Reset the earpieces

6 Technical data

Note

Specications are subject to change without notice.

TAA5205

Tap & hold multi-function touch for >25s on each earpiece individually.

Return earpieces to charging box & close the lid.

Follow steps in Use your earpiec- es-Connect the earpieces to your Bluetooth device.

Pair the earpieces with your Bluetooth device, select Philips TAA5205.

5

6

Music time 5 hours Talk time 5 hours Standby time 200 hours Charging time: 2 hours Lithium-ion battery 50 mAh on each earpiece, Lithium-ion battery 450 mAh on charging box Bluetooth version: 5.0 Compatible Bluetooth proles: HSP (Hands-Free Prole-HFP) A2DP (Advanced Audio Distri-

bution Prole) AVRCP (Audio Video Remote

Control Prole) Supported audio codec: SBC, AAC Frequency range: 2.402-2.480 GHz Transmitter power: < 10 dBm Operating range: Up to 10 meters (33 feet) Auto power o USB-C port for charging Low battery warning: available

7 Notice

Hereby, MMD Hong Kong Holding Limited declares that this product is in compli- ance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can nd the Declaration of Conformity on www.p4c.philips.com.

Declaration of conformity

Disposal of your old product and battery

Your product is designed and manufac- tured with high quality materials and components, which can be recycled and reused.

This symbol on a product means that the product is covered by European Directive 2012/19/EU.

This symbol means that the product contains a built-in rechargeable battery covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product to an ocial collection point or a Philips service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environ- ment and human health.

Remove the integrated battery

If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones. Make sure the earpieces is discon-

nected from the charging box before removing the battery.

Make sure the charging box is disconnected from the USB charging cable before removing the battery.

Compliance with EMF This product complies with all applica- ble standards and regulations regarding exposure to electromagnetic elds.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassem- bled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Notice of compliance

The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

FCC rules

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between equipment and receiver Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Canada: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Develop- ment Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device.

Caution: The user is cautioned that changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

IC Radiation Exposure Statement:

This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) Lappareil ne doit pas produire de brouillage; (2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. CAN ICES-3(B)/NMB-3(B)

8 Trademarks

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trade- marks and trade names are those of their respective owners.

Bluetooth

Siri is a trademark of Apple Inc., registered in the U.S. and other countries.

Google and Google Play are trademarks of Google LLC.

Google

Siri

9 Frequently asked questions

My Bluetooth headset does not turn on. The battery level is low. Charge the headset.

I cannot pair my Bluetooth headset with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headset.

Pairing does not work. Put both earpieces into charging box. Make sure you have disabled the Bluetooth function of any previously connected Bluetooth devices. On your Bluetooth device, delete Philips TAA5205 from the Bluetooth list. Pair your headset (see Pair the headset with your Bluetooth device at the rst time on page 6).

The Bluetooth device cannot nd the headset. The headset may be connected to a previously paired device. Turn o the connected device or move it out of range. Pairing may have been reset or the headset has been previously paired with another device. Pair the headset with the Bluetoot device again as described in the user manual. (see Pair the headset with your Bluetooth device at the st time on page 6).

My Bluetooth headset is connected to a Bluetooth stereo enabled mobile phone, but music only plays on the mobile phone speaker. Refer to the user manual of your mobile phone. Select to listen to music through the headset.

The audio quality is poor and crackling noise can be heard. The Bluetooth device is out of range. Reduce the distance between your headset and Bluetooth device, or remove obstacles between them. Charge your headset.

The audio quality is poor when streaming from the mobile phone is very slow, or audio streaming does not work at all. Make sure your mobile phone not only supports (mono) HSP/HFP but alos supports A2DP and is BT4.0x (or higher) compatible (see Technical data on page 10).

Manualsnet FAQs

If you want to find out how the TAA5205BK/00 Philips works, you can view and download the Philips TAA5205BK/00 TAA5205 Earphones User Manual on the Manualsnet website.

Yes, we have the User Manual for Philips TAA5205BK/00 as well as other Philips manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Philips TAA5205BK/00. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Philips TAA5205BK/00 TAA5205 Earphones User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Philips TAA5205BK/00 TAA5205 Earphones User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Philips TAA5205BK/00 TAA5205 Earphones User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Philips TAA5205BK/00 TAA5205 Earphones User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Philips TAA5205BK/00 TAA5205 Earphones User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.