Philips DCB352/10 DCB352 Docking System User Manual PDF

1 of 26
1 of 26

Summary of Content for Philips DCB352/10 DCB352 Docking System User Manual PDF

www.philips.com/welcome Register your product and get support at

EN User manual 3

DA Brugervejledning 25

DE Benutzerhandbuch 47

FR Mode demploi 71

IT Manuale utente 97

NO Brukerhndbok 121

DCB352

3

En gl

is h

EN

8 Other features 21 Set the sleep timer 21 Set the alarm timer 21 Play from an external device 21

9 Product information 22 Specications 22 Maintenance 23 USB playability information 23 Supported MP3 disc formats 23 RDS program types 24

10 Troubleshooting 24

Contents 1 Important 4

Safety 4 Notice 6

2 Your Docking Entertainment System 7 Introduction 7 Whats in the box 7 Overview of the main unit 8 Overview of the remote control 9

3 Get started 11 Connect power 11 Prepare the remote control 12 Set clock 12 Turn on 12

4 Play 13 Play disc 13 Play from USB 13 Skip to a track 13 Pause/resume play 13 Search within a track 13 Display play information 14 Select repeat/shufe play options 14 Program tracks 14

5 Adjust sound 15 Adjust volume 15 Select a preset sound effect 15 Enhance bass 15 Mute sound 15

6 Play iPod/iPhone/iPad 15 Compatible iPod/iPhone/iPad 15 Load the iPod/iPhone/iPad 16 Listen to the iPod/iPhone/iPad 16 Charge the iPod/iPhone/iPad 16 Remove the iPod/iPhone/iPad 16

7 Listen to radio 17 Listen to Digital Audio Broadcasts (DAB) 17 Listen to FM radio 19 Reset to factory setting 20

4

g Do not block any ventilation openings. Install in accordance with the manufacturers instructions.

h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.

i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

j Only use attachments/accessories specied by the manufacturer.

k Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

l Unplug this apparatus during lightning

storms or when unused for long periods of time.

m Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

1 Important

Safety

This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The exclamation point calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of re or electric shock, this apparatus should not be exposed to rain or moisture and objects lled with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Important Safety Instructions a Read these instructions.

b Keep these instructions.

c Heed all warnings.

d Follow all instructions.

e Do not use this apparatus near water.

f Clean only with dry cloth.

EN

5

En gl

is h

Hearing safety Listen at a moderate volume.

Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss. Sound can be deceiving. Over time your hearing comfort level adapts to higher volumes of sound. So after prolonged listening, what sounds normal can actually be loud and harmful to your hearing. To guard against this, set your volume to a safe level before your hearing adapts and leave it there.

To establish a safe volume level: Set your volume control at a low setting. Slowly increase the sound until you can hear it comfortably and clearly, without distortion.

Listen for reasonable periods of time: Prolonged exposure to sound, even at normally safe levels, can also cause hearing loss. Be sure to use your equipment reasonably and take appropriate breaks.

Be sure to observe the following guidelines when using your headphones.

Listen at reasonable volumes for reasonable periods of time. Be careful not to adjust the volume as your hearing adapts. Do not turn up the volume so high that you cant hear whats around you. You should use caution or temporarily discontinue use in potentially hazardous situations. Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may create a trafc hazard and is illegal in many areas.

n Battery usage CAUTION To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit:

Install all batteries correctly, + and - as marked on the unit. Do not mix batteries (old and new or carbon and alkaline, etc.). Remove batteries when the unit is not used for a long time. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, re or the like.

o Apparatus shall not be exposed to dripping or splashing.

p Do not place any sources of danger on the apparatus (e.g. liquid lled objects, lighted candles).

q Where the plug of the Direct Plug- in Adapter is used as the disconnect device, the disconnect device shall remain readily operable.

Warning

Never remove the casing of this apparatus. Never lubricate any part of this apparatus. Never place this apparatus on other electrical equipment. Keep this apparatus away from direct sunlight, naked ames or heat. Never look into the laser beam inside this apparatus. Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power.

EN

6

Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

The making of unauthorized copies of copy-protected material, including computer programs, les, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. This apparatus includes this label:

Note

The type plate is located on the bottom of the apparatus.

Notice Any changes or modications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the users authority to operate the equipment.

This product complies with the radio interference requirements of the European Community.

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

EN

7

En gl

is h

Whats in the box Check and identify the contents of your package:

Main unit Remote control 2 AAA batteries AC adaptor MP3 LINK cable User manual Quick start guide

2 Your Docking Entertainment System

Congratulations on your purchase, and welcome to Philips! To fully benet from the support that Philips offers, register your product at www.philips.com/welcome.

Introduction With this music system, you can enjoy audio from audio discs, USB storage devices, iPod, iPhone, iPad and other external devices, or listen to radio stations. The music system offers you multiple sound effect settings that enrich sound with Digital Sound Control (DSC) and Dynamic Bass Boost (DBB). The system supports the following media formats:

EN

8

g EJECT Eject the disc.

h Display panel Show current status.

i SOURCE Select a source: DISC, USB, DOCK, DIGITAL RADIO, FM TUNER, or MP3-Link.

j PROG Program tracks. Program radio stations. Set the clock.

k DISPLAY During play, select display information.

Overview of the main unit

a MP3-LINK

Jack for an external audio device.

b Jack for a USB mass storage device.

c IR sensor Detect signals from the remote control. Always point the remote control at the IR sensor.

d Disc compartment

e Dock for iPod/iPhone/iPad Load an iPod/iPhone/iPad.

f STANDBY-ON Turn on the system, switch to standby mode, or Eco Power standby mode.

a

b

c

d

e

f

g

h

i j k

l m n

qo

p r

EN

9

En gl

is h

Overview of the remote control

a

Turn on the system, or switch to standby mode, or switch to Eco Power standby.

b OPEN/CLOSE Eject the disc.

c CD Select disc source.

PRESET/ALBUM

PROG/ CLOCK SET

SLEEP/ TIMER

DISPLAY MENU

RDS

DSC DBB

USB

TUNERCD

VOL

MODE/ SCAN

3

4 5 6

7 8 9

1

0

2

DAB

OPEN/CLOSE

MP3 LINK

ENTER

b

a

c

e

f

d

g

h

j i

k

l

m

n

s

r

q

p

o

l TIMER Set the alarm timer.

m MODE/SCAN Select repeat/shufe mode. Search FM/DAB radio stations.

n STOP/MENU Stop play. Access iPod/iPhone or DAB menu.

o ALBUMPRESET +/- Select a preset radio station. Skip to the previous/next album. Adjust time.

p / Skip to the previous/next track. Search within a track/disc. Tune to a radio station.

q Start or pause play. Conrm a selection.

r VOLUME +/- Adjust volume.

EN

10

p MODE/SCAN Select repeat/shufe play mode. Search FM/DAB radio stations.

q /MENU Stop play. Access iPod or DAB menu.

r iPod/iPhone Select iPod/iPhone source.

s DAB/TUNER Select DAB/tuner source.

d / Navigate in the iPod/DAB menu. Skip to the previous/next album. Skip to the previous/next preset station. Select 12 hour or 24 hour format. Adjust hour/minute digits.

e / Skip to the previous/next track. Search within a track. Tune to a radio station.

f /ENTER Start or pause play. Conrm a selection.

g USB/MP3 LINK Select USB device source. Select external audio device source.

h RDS/DISPLAY Display CLOCK. Display RDS/DAB information. Select display information during play.

i Mute or restore volume.

j VOL +/- Adjust volume.

k Numeric keypad Select a track from a disc directly.

l PROG/CLOCK SET Program tracks. Program radio stations. Set the clock.

m SLEEP/TIMER Set the sleep timer. Set the alarm timer.

n DSC Select a preset sound setting.

o DBB Turn on or off dynamic bass enhancement.

EN

11

En gl

is h

1 Select the right adaptor.

2 Connect the power adaptor to the wall

outlet.

3 Get started

Caution

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. _______________________ Serial No. ________________________

Connect power

Caution

Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the apparatus. Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. Before you connect the AC adaptor, ensure that you have completed all other connections.

EN

12

Set clock

Note

You can set the clock in the standby mode only.

1 In standby mode, press and hold PROG/ CLOCK SET to activate the clock setting mode.

SET CLOCK is displayed. The 12 hour or 24 hour format is displayed.

2 Press / to select 12 hour or 24 hour format.

3 Press PROG/CLOCK SET. The hour digits begin to blink.

4 Press / to set the hour. 5 Press PROG/CLOCK SET.

The minute digits begin to blink.

6 Press / to set the minute. 7 Press PROG/CLOCK SET to conrm.

Turn on 1 Press .

The unit switches to the last selected source.

Switch to standby 1 Press to switch the system to standby

mode. The backlight on the display panel is reduced. The clock (if set) is displayed on the display panel.

To switch the system to Eco Power standby mode: 1 In standby mode, press and hold for

more than 2 seconds. ECO POWER is displayed. The backlight on the display panel turns off.

Prepare the remote control

Caution

Risk of explosion! Keep batteries away from heat, sunshine, or re. Never discard batteries in re.

To insert the remote control battery: 1 Open the battery compartment. 2 Insert 2 AAA batteries with correct

polarity (+/-) as indicated. 3 Close the battery compartment.

Note

If you are not going to use the remote control for a long time, remove the batteries. Do not use old and new or different types of batteries in combination. Batteries contain chemical substances, so they should be disposed of properly.

a

b

c

EN

13

En gl

is h

Press to access a folder. Press / to select a le. Press to start play.

Skip to a track For CD: 1 Press / to select another track.

To select a track directly, you can also press a key on the numerical keypad.

For MP3 disc and USB: 1 Press to select an album or folder. 2 Press / to select previous/next

track or le.

Pause/resume play 1 During play, press to pause/resume

play.

Search within a track 1 During play, press and hold / . 2 Release to resume normal play.

4 Play

Play disc 1 Press CD to select the disc source. 2 Insert a disc into the disc compartment

with the printed side facing up. Play starts automatically.

Play from USB

Note

Ensure that the USB storage device contains playable audio content.

1 Connect the USB storage device into the socket.

2 Press USB to select the USB source. The total number of playable tracks is displayed. Play starts automatically.

EN

14

Program tracks You can program a maximum of 20 tracks. 1 In CD/USB mode, at the stop position,

press PROG to activate the program mode.

[PROG] (program) and track number begin to blink.

2 For MP3 tracks, press to select an album.

3 Press / to select a track number, then press PROG to conrm.

4 Repeat steps 2 to 3 to program more tracks.

5 Press to play the programmed tracks. During play, [PROG] (program) is displayed. To erase the program: Press once in the stop mode or twice during playback.

[PROG] disappears on the display.

Display play information 1 During play, press DISPLAY repeatedly to

select different play information.

Select repeat/shufe play options To select repeat play mode: 1 During play, press MODE repeatedly to

select a repeat option. [Rep one]: plays the current track continuously. [Rep all]: repeats the entire disc/ programme.

To select shufe play mode: 1 During play, press MODE repeatedly to

select the shufe play mode. [SHUF]: Tracks of the entire disc are played in random order.

To resume normal play, press MODE repeatedly until no shufe/repeat option is displayed.

Tip

During repeat/shufe playback, press to stop playback and cancel repeat/shufe playback. Shufe function is not available while programmed tracks are played.

EN

15

En gl

is h

6 Play iPod/ iPhone/iPad

This system is equipped with a dock for iPod/iPhone/iPad. You can enjoy audio from the docked system through the powerful speakers.

Compatible iPod/iPhone/iPad Made for Apple iPod models with 30-pin dock connector as follows:

iPod touch (4th generation) iPod touch (3rd generation) iPod touch (2nd generation) iPod touch (1st generation) iPod nano (6st generation) iPod nano (5th generation) iPod nano (4th generation) iPod nano (3rd generation) iPod nano (2nd generation) iPod nano (1st generation) iPhone 4 iPhone 3GS iPhone 3G iPhone iPad iPad 2

5 Adjust sound

Adjust volume 1 During play, press VOL +/- to increase/

decrease the volume.

Select a preset sound effect 1 During play, press DSC repeatedly to

select: [POP] (pop) [JAZZ] (jazz) [CLASSIC] (classic) [ROCK] (rock)

Enhance bass 1 During play, press DBB to turn on or off

dynamic bass enhancement. If DBB is activated, DBB is displayed.

Mute sound 1 During play, press to mute/restore the

speakers.

EN

16

Charge the iPod/iPhone/iPad When the system is connected to power, the docked iPod/iPhone/iPad begins to charge.

Note

IPod with color display, iPod classic, and iPod with video are not compatible with dock charging. In Eco power standby mode, iPod/iPhone/iPad cannot be charged.

Remove the iPod/iPhone/iPad 1 Pull the iPhone/iPod/iPad off the dock. 2 Flip down the lid to hide the dock.

Load the iPod/iPhone/iPad 1 Lift the lid of the dock. 2 Load the iPod/iPhone/iPad onto the dock.

Listen to the iPod/iPhone/iPad 1 Press the button iPod on your RC. 2 Load your iPod/iPhone/iPad. 3 Play the selected track on your iPod/

iPhone/iPad. To pause/resume the play, press . To search during play: press and hold

/ , then release to resume normal play. To scroll through the menu, press

/ . To conrm a selection, press to conrm.

If no key is pressed for more than 10 seconds after pressing the button MENU, acts back as the play/pause key.

EN

17

En gl

is h

?: Indicates that the station is not currently available, or not active.

: Indicates that the station is a primary station with secondary service.

: Indicates that the station is a secondary station.

Program DAB radio stations manually You can program a maximum of 30 preset DAB radio stations. 1 Tune to a DAB station. 2 Press PROG on the remote control to

activate programming. 3 Press / on the remote control to

allocate a number (1-30) for the preset. 4 Press PROG to conrm.

Note

If a DAB station is already stored under a preset location, new DAB station assigned to this location will overwrite the old DAB station. DAB station presets will not overwrite FM presets.

Scan for new DAB stations New stations and services will be regularly added in the DAB broadcast. To make new DAB stations and service available on your DAB radio, a search is needed. 1 In DAB mode, press SCAN.

The unit starts to scan for DAB stations.

Listen to a preset DAB radio station 1 Press / to select a preset number on

the main unit.

7 Listen to radio

Listen to Digital Audio Broadcasts (DAB) Digital Audio Broadcasting (DAB), is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality, and more information. For the rst time when DAB mode is switched on. 1 Press SOURCEon the main unit

repeatedly to select DAB. The system performs auto search. All the available DAB stations are stored. The radio tunes to the rst available station

Tip

The display shows a rectangle. The position of the rectangle indicates the degree of signal strength. (The further towards the right, the greater the signal strength.) If there is no DAB coverage currently available, or DAB signal is too weak in your area, no DAB station is found, and message [Service not available] scrolls.

Tune to DAB radio station manually 1 In DAB mode, press / repeatedly

until your desired station name displays. 2 Press ENTER to conrm the selection.

The radio immediately tunes to the selected station.

About station display symbols You probably see some symbols displayed before the station names as follows:

H: Indicates that the station is one of 10 most-listened stations by you based on DAB radios monitoring.

EN

18

Manual tune With this feature, you can tune to a specic channel/frequency manually. In addition to antenna orientation for better radio reception, the optimal reception can also be obtained with this feature. 1 In DAB mode, press MENU to display the

[Manual tune] option. 2 Press ENTER to conrm the selection.

The display shows a channel and its frequency.

3 Press / repeatedly until the desired channel/frequency appears.

4 Press ENTER to conrm the selection.

Tip

You can press RDS/DISPLAY to change the service information on the display. You can adjust the position of the antenna to obtain the optimal signal strength.

Dynamic Range Control (DRC) DRC adds or removes a degree of compensation for the differences in the dynamic range between radio stations. There are three levels of compensation:

[DRC Off]: No compensation applied. (the default)

[DRC Low]: Maximum compensation applied.

[DRC High]: Medium compensation applied.

1 In DAB mode, press MENU to enter the menu options.

2 Press / repeatedly until [DRC] displays.

3 Press ENTER to enter the sub-menu. The current DRC level displays on the rst line.

4 Press / to select a DRC value [DRC Off], [DRC Low] and [DRC

High] displays on the second line.

Display DAB information On the display of DAB broadcasting, the rst line shows station name, and the second line shows the service information for the current station. Seven types of service information are available. 1 Press RDS/DISPLAY repeatedly to

cycle through the display information (if available).

Dynamic label segment (DLS) Program type (PTY) Ensemble Name Time Channel and frequency Bit rate and audio status Signal error rate

Use DAB menu 1 In the DAB mode, press MENU to enter

the DAB menu. The rst setup option [Station list] displays.

2 Press / to scroll the menu options: [Station list] [Full scan] [Manual tune] [DRC] [Prune] [System]

3 To select an option, press ENTER . 4 Repeat step 2-3 if sub-option is available

under one option.

Full scan Full scan is used to perform a wide range of DAB radio search. 1 In the DAB mode, press MENU to enter

the menu options. 2 Press / repeatedly until [Full scan]

displays. 3 Press to conrm the selection.

Full scan starts automatically.

EN

19

En gl

is h

Program radio stations automatically You can program a maximum of 30 preset radio stations (FM). 1 In the tuner mode, press and hold

MODE/SCAN to activate automatic program mode.

All available stations are programmed. The rst programmed radio station is broadcast automatically.

Program radio stations manually

Note

You can program a maximum of 30 preset radio stations.

1 Tune to a radio station. 2 Press PROG to activate program mode. 3 Press / to allocate a number (1

to 30) to this radio station, then press PROG to conrm.

The preset number and the frequency of the preset station are displayed.

4 Repeat the previous steps to program other stations.

Note

To overwrite a programmed station, store another station in its place.

Select a preset radio station 1 In tuner mode, press / to select a

preset number.

Tip

Position the antenna as far as possible from TV, VCR, or other radiation source. For optimal reception, fully extend and adjust the position of the antenna.

5 Press to conrm the selection. You should be able to hear the difference in compression immediately.

Note

The best way to determine which of these DRC value settings suits you best is to experiment with them on various source material.

Prune This option lists active stations and removes any stations that are in the list but have no service in your area from the service list. Those invalid stations in the service list have a question mark (?) displayed in front of the station name. 1 Select Prune stations and press .

All stations that have a question mark are deleted from the service list.

System [Factory reset]: Reset all the settings

of this unit to factory default. Press to conrm reset.

[SW version]: Display software version of the unit.

Listen to FM radio

Tune to a radio station 1 Press TUNER to select FM. 2 Press / to tune to a specic

frequency. Play starts automatically.

Tip

You can press MODE/SCAN to tune to the next station with strong reception automatically.

EN

20

Reset to factory setting 1 In DAB/FM mode, press MENU to enter

the menu options. 2 Press / repeatedly until [System]

displays on the display panel. 3 Press to access the system menu.

[Factory Reset] displays.

4 Press to enter factory reset menu. The display panel shows options [Yes] and [No] under [Factory Reset].

5 Press / to select [Yes]. 6 Press to conrm the DAB/FM factory

reset.

FM stations with RDS Radio Data System (RDS) is a service that sends additional broadcast information along with FM stations. If you listen to a FM station with RDS signal, RDS displays.

Display RDS information 1 Tune to the desired RDS radio station on

the FM waveband. 2 Press RDS/DISPLAY on the remote

control repeatedly to switch through the following information (if available):

Radio text message Program type (for example: News, Sport...) Frequency Stereo/Mono Mode Time Date

Note

[NO Radio Text], [NO PTY], [NO Name], [Mono], [00:00:00] or [0-0-0000] displays if no RDS signal is available.

Set RDS clock You can use time signal broadcast together with the RDS signal to set the clock of the unit. 1 Tune to a RDS radio station that

transmits time signals. 2 Press and hold MENU.

[CLK Sync] is displayed.

Note

The accuracy of the transmitted time depends on the RDS station that transmits the time signal.

EN

21

En gl

is h

6 Press SLEEP/TIMER to conrm. The minute digits begin to blink.

7 Press / to set the minute. The timer is set and activated.

is displayed.

Activate and deactivate the alarm timer 1 Switch the system to standby mode. 2 Press TIMER repeatedly to activate or

deactivate the timer. If the timer is activated, is displayed. If the timer is deactivated, disappears on the display.

Note

If DISC/USB/iPod source is selected and the track cannot be played, tuner is activated automatically.

Play from an external device You can also listen to an external audio device through this unit. 1 Press USB/MP3 LINK to select the MP3

link source. 2 Connect the supplied MP3 link cable to:

the MP3 LINK jack (3.5mm) on the unit. the headphone jack on an external device.

3 Start to play the device (see the device user manual).

8 Other features

Set the sleep timer This system can switch to standby automatically after a set period of time. 1 When the system is turned on, press

SLEEP repeatedly to select a set period of time (in minutes).

When sleep timer is activated, is displayed.

To deactivate sleep timer 1 Press SLEEP repeatedly until OFF is

displayed. When sleep timer is deactivated, [SLEEP](sleep) disappears on the display.

Set the alarm timer This unit can be used as an alarm clock. The disc/radio/USB/iPod is activated to play at a preset time.

Note

Ensure that you have set the clock correctly.

1 Press to switch to standby mode. 2 Press and hold SLEEP/TIMER for more

than two seconds. A prompt to select the source is displayed.

3 Press CD, iPod, TUNER, DAB, or USB to select a source.

4 Press SLEEP/TIMER to conrm. The clock digits are displayed. The hour digits begin to blink.

5 Press / to set the hour.

EN

22

Tuner Tuning Range FM: 87.5 - 108 MHz;

DAB: 174.92-239.20 MHz Tuning grid 50 KHz DAB sensitivity - EN50248

<-95 dbm

Total Harmonic Distortion

<2%

Signal to Noise Ratio >50 dB Number of presets 30 (FM)

30 (DAB)

Speakers Speaker Impedance 4 ohm Speaker Driver 2 X 3 full range Sensitivity >82 dB/m/W

General information AC power (power adaptor)

Model No.: OH- 1048E1203500U(Philips); Input: 100-240 V~, 50/60Hz 1.5A MAX; Output: 12 V 3.5A;

Operation Power Consumption

25 W

Eco Standby Power Consumption

<1 W

USB Direct Version 2.0/1.1 Dimensions - Main Unit (W x H x D)

390 x 140.5 x 200.5mm

Weight - Main Unit

2.54 kg

9 Product information

Note

Product information is subject to change without prior notice.

Specications

Amplier Rated Output Power

2X15W RMS

Frequency Response

60 Hz - 16 kHz, 3 dB

Signal to Noise Ratio

>65dBA

Aux Input 0.5 V RMS 20kohm

Disc Laser Type Semiconductor Disc Diameter 12cm/8cm Support Disc CD-DA, CD-R,

CD-RW, MP3-CD Audio DAC 24Bits / 44.1kHz Total Harmonic Distortion

<1%

Frequency Response

60Hz -16kHz (44.1kHz)

S/N Ratio >65dBA

EN

23

En gl

is h

Supported formats: USB or memory le format FAT12, FAT16, FAT32 (sector size: 512 bytes) MP3 bitrate (data rate): 32-320 Kbps and variable bitrate Directory nesting up to a maximum of 8 levels Number of albums/ folders: maximum 99 Number of tracks/titles: maximum 999 ID3 tag v2.0 or later File name in Unicode UTF8 (maximum length: 128 bytes)

Unsupported formats: Empty albums: an empty album is an album that does not contain MP3 les, and is not shown in the display. Unsupported le formats are skipped. For example, Word documents (.doc) or MP3 les with extension .dlf are ignored and not played. AAC, WAV, PCM audio les DRM protected WMA les (*.wav, *.m4a, *.m4p, *.mp4, *.aac) WMA les in Lossless format

Supported MP3 disc formats ISO9660, Joliet Maximum title number: 512 (depending on le name length) Maximum album number: 255 Supported sampling frequencies: 32 kHz, 44.1kHz, 48 kHz Supported Bit-rates: 32~256 (kbps), variable bit rates

Maintenance Clean the cabinet

Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.

Clean discs When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out.

Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records.

Clean the disc lens After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good play quality, clean the disc lens with Philips CD lens cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.

USB playability information Compatible USB storage devices:

USB ash memory (USB 2.0 or USB1.1) USB ash players (USB 2.0 or USB1.1) memory cards (requires an additional card reader to work with this system)

EN

24

10 Troubleshooting

Warning

Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.

RDS program types NO TYPE No RDS programme type NEWS News services AFFAIRS Politics and current affairs INFO Special information

programs SPORT Sports EDUCATE Education and advanced

training DRAMA Radio plays and literature CULTURE Culture, religion and

society SCIENCE Science VARIED Entertainment programs POP M Pop music ROCK M Rock music MOR M Light music LIGHT M Light classical music CLASSICS Classical music OTHER M Special music programs WEATHER Weather FINANCE Finance CHILDREN Childrens programs

SOCIAL Social Affairs RELIGION Religion PHONE IN Phone In TRAVEL Travel LEISURE Leisure JAZZ Jazz Music COUNTRY Country Music NATION M National M

Manualsnet FAQs

If you want to find out how the DCB352/10 Philips works, you can view and download the Philips DCB352/10 DCB352 Docking System User Manual on the Manualsnet website.

Yes, we have the User Manual for Philips DCB352/10 as well as other Philips manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Philips DCB352/10. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Philips DCB352/10 DCB352 Docking System User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Philips DCB352/10 DCB352 Docking System User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Philips DCB352/10 DCB352 Docking System User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Philips DCB352/10 DCB352 Docking System User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Philips DCB352/10 DCB352 Docking System User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.