Philips AJ7034D/05 AJ7034D Docking Station User Manual PDF

1 of 14
1 of 14

Summary of Content for Philips AJ7034D/05 AJ7034D Docking Station User Manual PDF

User manual

Register your product and get support at



Contents 1 Important 2

Safety 2

2 Your Docking Entertainment System 3 Introduction 3 What's in the box 3 Overview of the main unit 4

3 Get started 5 Install battery 5 Connect power 5 Switch to standby mode 5 Set time and date 5

4 Play from iPod/iPhone 6 Compatible iPod/iPhone 6 Install application 6 Play from iPod/iPhone 7 Charge the iPod/iPhone 8 Adjust volume 8 Remove the iPod/iPhone 8

5 Listen to radio 9 Tune to FM radio stations 9

6 Other features 9 Set alarm timer 9 Set sleep timer 10 Play from an external device 10 Adjust display brightness 10

7 Product information 10

8 Troubleshooting 11

9 Notice 12

2 EN

1 Important

Safety Heed all warnings. Follow all instructions. Do not use the clock radio near water. Clean only with dry cloth. Do not block any ventilation openings.

Install in accordance with the manufacturer's instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other heat.

Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the clock radio.

by the manufacturer.

Unplug the clock radio during lightning storms or when unused for long periods of time.

! personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Battery usage CAUTION To prevent battery leakage which may result in bodily injury, property damage, or damage to the clock radio: Install the battery correctly, + and - as

marked on the clock radio. Remove battery when the clock radio

is not used for a long time. The clock radio shall not be exposed to

dripping or splashing.

Do not place any sources of danger on the "##!$%& #

Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable.


Never remove the casing of this clock radio. Never lubricate any part of this clock radio. Never place this clock radio on other electrical

equipment. Keep this apparatus away from direct sunlight, naked

(# Ensure that you always have easy access to the power

cord, plug or adapter to disconnect this clock radio from the power.


2 Your Docking Entertainment System

Congratulations on your purchase, and )*;<$ support that Philips offers, register your product at If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the clock radio. Write the numbers here: Model No. __________________________ Serial No. ___________________________

Introduction With this clock radio, you can listen to FM radio; enjoy audio from iPod/iPhone or an

external device; choose buzzer, radio, or audio in iPod/

iPhone as your alarm source.

What's in the box Check and identify the contents of your package: >)$ Quick start guide

4 EN

Overview of the main unit

a AL1/AL2

Set alarm. View alarm settings. Activate/deactivate alarm timer.

b SNOOZE/BRIGHTNESS Snooze alarm. Adjust display brightness.

c DOCK Dock for iPod/iPhone.

d Volume knob Rotate to adjust volume or time. *#

e Turn on/off the clock radio.


g k











f SLEEP Set sleep timer.

g SOURCE Select source.

h Battery tray

i Power cord

j / Tune or scan to an FM radio station.

k SET TIME Set the time.

l MP3 LINK Connect an external audio device.

m FM ANTENNA Improve FM reception.


3 Get started Caution

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

Install battery Caution

Risk of explosion! Keep batteries away from heat, &#@$#

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

The battery contains chemical substances, so it should be disposed of properly.

Keep children away from the battery. Perchlorate Material - special handling may apply. See


You can only use AC power as power supply. The pre- installed lithium CR2032 battery can only back up time and alarm.

Remove the protective tab to activate the battery.


Connect power Caution

Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back or underside of the unit.

Risk of electric shock! When you unplug the power adapter, always pull the plug from the socket. Never pull the cord.

Before connecting the power adapter, make sure that you have completed all other connections.

Use the supplied power adapter only.

Insert the power plug into the wall outlet. The clock radio switches to the last

selected source.

Switch to standby mode Press to switch the clock radio to standby mode. <"


Set time and date

1 Press and hold SET TIME on the back of your clock radio for more than two seconds. [12H] or [24H] begins to blink.

2 Rotate the knob to select 12/24 hour format.

6 EN

3 *"$# The hour digits begin to blink.

4 Repeat steps 2-3 to set hour and minute.


If clock is not manually set, when iPod/iPhone is connected, the unit synchronizes time from the iPod/ iPhone automatically.


The accuracy of the transmitted time depends on the docked iPod/iPhone that transmits the time signal.

4 Play from iPod/ iPhone

You can enjoy audio from iPod/iPhone through this clock radio.

Compatible iPod/iPhone The unit supports the following iPod, iPhone models: Made for. iPod touch (1st, 2nd, 3rd, and 4th

iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th

iPhone 4 iPhone 3GS iPhone 3G iPhone

Install application

1 Press SOURCE repeatedly to select DOCK mode.

2 Insert the iPod/iPhone into the dock. 3 XZ&)$"

install an application in your iPod/iPhone. Click Yes to install the application.


Play from iPod/iPhone Note

Make sure that you have installed the application in your iPod/iPhone.

1 Click home audio icon on your iPod/ iPhone. The setting page appears.

Click setting button on the bottom right corner, and you can set the clock, sleep timer, and alarm for your clock radio.

2 Slide to previous page to play music from

your iPod/iPhone.

3 Slide to the third page to reset radio


a Press to tune to a radio station.

b Press SAVE, and then press a preset number. SAVE and the selected preset

$$# The radio station is saved


c If SAVE is activated, you can tune to other stations, and press a number to save stations directly.

8 EN


If you don't need to preset more stations, press SAVE again to make sure that the SAVE button is deactivated #

4 Slide to the following page. You can: set the theme; share the information; set the location for weather report; choose temperature unit; turn on or off month/day revert; search for radio stations automatically

by pressing Radio Auto Program automatic programming. [Searching\# All available stations are

programmed in the order of waveband reception strength.

< station is broadcast automatically.

Charge the iPod/iPhone When your clock radio is connected to power, the docked iPod/iPhone begins to charge automatically.

Adjust volume During play, you can rotate the knob to adjust volume.

Remove the iPod/iPhone Pull the iPod/iPhone out of the dock.


5 Listen to radio Note

Keep the unit away from other electronic devices to avoid radio interference.

For better reception, do not place iPod/iPhone into the dock when you listen to the radio. Fully extend and adjust the position of the FM antenna.

Tune to FM radio stations You also can tune to radio stations from your clock radio. 1 Press SOURCE repeatedly to select FM

tuner. 2 Press and hold / on the back

of your clock radio for more than two seconds. <

broadcast automatically.

3 Repeat step 2 to tune to more stations.

Press / reception.

6 Other features

Set alarm timer

Set alarm


Make sure that you have set the clock correctly.

You can set two alarms to ring at different time. 1 Press and hold AL1/AL2 for more than

two seconds to activate alarm setting mode. The hour digits and alarm icon begin

to blink.

2 Rotate the knob to set the hour. 3 "$#

The minute digits begin to blink.

4 Repeat steps 2-3 to set the minute, select $]]&&"& and adjust the volume.


When alarm time comes, the selected buzzer, radio, or iPod/iPhone turns on.

You can only select the same alarm source for Alarm 1 and Alarm 2.

If iPod/iPhone is selected, but no iPod/iPhone is connected, the clock radio switches to buzzer source instead.

Activate/deactivate alarm timer

1 Press AL1/AL2 to view alarm settings. 2 Press AL1/AL2 again to activate or

deactivate the alarm timer. or is displayed if alarm timer is on

and disappears if it is off.

10 EN

To stop the ringing alarm, press the corresponding AL1/AL2.

The alarm repeats ringing for the next day.

Snooze alarm When alarm sounds, press SNOOZE. The alarm snoozes and repeats ringing 9

minutes later.

Set sleep timer This clock radio can switch to standby mode automatically after a preset period. Press SLEEP repeatedly to select the sleep # When the sleep timer is activated,

appears. To deactivate the sleep timer, press SLEEP repeatedly until clock time appears.

Play from an external device You can also listen to an external audio device through this unit. 1 Press SOURCE to select the AUX source. 2 ^>*`"$

to: the "`#{

back of your clock radio. the headphone socket of an external

device. 3 Start to play the device (see the user


Adjust display brightness Press BRIGHTNESS repeatedly to select different brightness levels.

7 Product information


Product information is subject to change without prior notice.

! Total Output Power 20 W RMS Frequency Response 40-20000 Hz Signal to Noise Ratio >70 dB Total Harmonic Distortion <1% >*`" 0.6 V RMS

10 k ohm

Tuner (FM) Tuning range 87.5-108 MHz Tuning grid 50 KHz Sensitivity - Mono, 26 dB S/N Ratio - Stereo, 46 dB S/N Ratio

<22 dBf <46 dBf

Search Selectivity 30 dBf

Speakers Speaker Impedance 4 ohm Sensitivity >82 dB/m/W


General information AC power )

Brand name: Philips; Model: YJS03-1001800B; Input: 100-240 V~, 47-63 Hz; 500 mA; Output: 10.0 V 1800 mA;

Operation Power Consumption <25 W Standby Power Consumption <1 W Dimensions: Main Unit

283 x 118 x 112 mm

Weight: -Main Unit -With Packing

1.36 kg 1.75 kg

8 Troubleshooting Warning

Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site )))##)# Philips, ensure that the apparatus is nearby and the model number and serial number are available.

No power " Ensure that the AC power plug of the unit

is connected properly. " Ensure that there is power at the AC


No sound " Adjust the volume.

No response from the unit " Disconnect and reconnect the AC power

plug, then turn on the unit again.

Poor radio reception " Increase the distance between the unit and

your TV or VCR. " Fully extend the FM antenna.

Alarm does not work " Set the clock/alarm correctly.

Clock/alarm setting erased " Power has been interrupted or the power

plug has been disconnected. " Reset the clock/alarm.

12 EN

9 Notice

This product complies with the radio interference requirements of the European Community. device that are not expressly approved by Philips Consumer Lifestyle may void the users authority to operate the equipment.

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.Please inform yourself about the local rules on separate collection of batteries

because correct disposal helps to prevent negative consequences for the environmental and human health.

Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to $$& $ $&# Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Made for iPod and Made for iPhone mean that an electronic accessory has been * *&$$ the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. 2011 Koninklijke Philips Electronics N.V. All rights reserved. $%) notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.


The type plate is located on the bott

Manualsnet FAQs

If you want to find out how the AJ7034D/05 Philips works, you can view and download the Philips AJ7034D/05 AJ7034D Docking Station User Manual on the Manualsnet website.

Yes, we have the User Manual for Philips AJ7034D/05 as well as other Philips manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Philips AJ7034D/05. Full manuals and user guide PDFs can be downloaded from

The best way to navigate the Philips AJ7034D/05 AJ7034D Docking Station User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Philips AJ7034D/05 AJ7034D Docking Station User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Philips AJ7034D/05 AJ7034D Docking Station User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Philips AJ7034D/05 AJ7034D Docking Station User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Philips AJ7034D/05 AJ7034D Docking Station User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.