Philips DCM5090/10 DCM5090 Docking Sound System User Manual PDF

1 of 21
1 of 21

Summary of Content for Philips DCM5090/10 DCM5090 Docking Sound System User Manual PDF

DCM5090Register your product and get support at

www.philips.com/welcome

EN User manual 3

DA Brugervejledning 21

DE Benutzerhandbuch 41

EL

FI Kyttopas 87

FR Mode demploi 107

IT Manuale utente 129

NL Gebruiksaanwijzing 151

3

En gl

is h

EN

Contents 1 Important 4

Safety 4 Notice 5

2 Your Docking Entertainment System 7 Introduction 7 Whats in the box 7 Overview of the main unit 8 Overview of the remote control 9

3 Get started 10 Connect FM antenna 10 Connect power 11 Prepare the remote control 11 Set clock 11 Turn on 12

4 Play 12 Play from disc 12 Play iPod/iPhone/iPad 12 Play from USB 14

5 Play options 14 Pause/resume play 14 Stop play 14 Skip to a track 14 Search within a track 14 Program tracks 15 Display ID3 information 15

15 Tune to a radio station 15 Program radio stations 15 Select a preset radio station 16 Display play information 16

7 Adjust sound 16 Adjust volume 16 Select a preset sound effect 16 Enhance bass 16 Immerse music over a wider spot 16 Mute sound 16

8 Other features 17 Set the sleep timer 17 Set the alarm timer 17 Listen to an external device 17

9 Product information 18 USB playability information 19 Supported MP3 disc formats 19

10 Troubleshooting 20

4

Do not install near any heat sources such as radiators, heat registers, stoves, or produce heat.

Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the device.

Only use attachments/accessories !"

Unplug this device during lightning storms or when unused for long periods of time.

# personnel. Servicing is required when the device has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

Battery usage CAUTION To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: Install all batteries correctly, + and -

as marked on the unit. Do not mix batteries (old and new

!$%"" Remove batteries when the unit is

not used for a long time. Batteries (battery pack or batteries

!& &% or the like.

Devices shall not be exposed to dripping or splashing.

Do not place any sources of danger on ""#!'% "

Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

1 Important

Safety

This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The exclamation mark draws attention to features for which you should read the enclosed literature closely to prevent operational and maintenance problems. )*;<;=>?$ electric shock, this device should not be &!' with liquids, such as vases, should not be placed on this device. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Important Safety Instructions Read these instructions. Heed all warnings. Follow all instructions. Do not use this device near water. Clean only with dry cloth. Do not block any ventilation openings.

Install in accordance with the manufacturers instructions.

EN

5

En gl

is h

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for environmental and human health.

Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to >!!&% ! !%" Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Warning

Never remove the casing of this device. Never lubricate any part of this device. Never place this device on other electrical equipment.

Keep this device away from direct sunlight, $"

Never look into the laser beam inside this device.

Ensure that you always have easy access to the power cord, plug or adapter to disconnect this device from the power.

Mains fuse This information applies only to products with a UK mains plug. ?@ molded plug. If you replace the fuse, use one with: the ratings shown on the plug, a BS 1362 approval, and the ASTA approval mark. Contact your dealer if you are not sure about what type of fuse to use. Caution: To conform with the EMC directive GJJQJQVX% the power cord.

Notice * device that are not expressly approved by Philips Consumer Lifestyle may void the users authority to operate the equipment.

This product complies with the radio interference requirements of the European Community.

EN

6

Note

The type plate is located on the back of the unit.

Norge ?$Z" Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor $$$Z tilsluttet nettkontakten. [Z!$$ stt, skal apparatet ikke utsettes for regn eller fuktighet.

The making of unauthorized copies of copy-protected material, including computer %%! recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes.

Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Made for iPod, Made for iPhone, and Made for iPad mean that an electronic accessory has been designed to connect \%\%\% %!! developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc.

This device includes this label:

EN

7

En gl

is h

Whats in the box Check and identify the contents of your package: Main unit Remote control with two AAA batteries G&@V]]^ MP3 link cable FM antenna User manual Quick start guide

2 Your Docking Entertainment System

Congratulations on your purchase, and @\`?! support that Philips offers, register your product at www.philips.com/welcome.

Introduction With this unit, you can: enjoy audio from discs, USB devices,

iPod/iPhone/iPad, and other external devices

listen to radio stations

You can enrich sound output with these sound effects: {||{|| {X{X Living Sound

The unit supports the following media formats:

EN

8

g !" Adjust subwoofer volume.

h Display panel Show current status.

i Disc compartment

j USB socket.

k #$%&' Connect an external audio device.

l $ Pull to open the protective panel.

m Eject the disc.

n !"()* Adjust volume.

Overview of the main unit

a DOCK

Dock for iPod/iPhone/iPad.

b Start or pause play.

c $+--6()* Select a preset radio station. Skip to the previous/next album.

d SRC Select a source: CD, FM TUNER,

iPod/iPhone/iPad, USB, or MP3 LINK.

e Turn the unit on. Switch to standby mode or Eco

power standby mode.

f PROG Program tracks. Program radio stations. Set the clock.

l

j

e f g

h

i

a

b

d

c

m n

o

k

p

EN

9

En gl

is h

a Turn the unit on. Switch to standby mode or Eco

power standby mode.

b EJECT Eject the disc.

c CD/ID3 Select CD source. Display ID3 information.

d /OK Start or pause play. X"

e / Skip to the previous/next track. Search within a track/disc. Tune to a radio station. Set clock and timer.

f #$%&') Select MP3 LINK or USB source.

g Menu/ Access the iPod/iPhone/iPad menu. Stop play or erase a program.

h Mute or restore sound.

i !"()* Adjust volume.

j Numeric keypad Select a track. Select a preset radio station.

k $+";)<"<'-6 Program tracks. Program radio stations. Set the clock.

l --$)6%#-+ Set the sleep timer. Set the alarm timer.

m DSC Select a preset sound setting.

o / Skip to the previous/next track. Search within a track/disc. Tune to a radio station. Set clock and timer.

p Stop play or erase a program.

Overview of the remote control

cfhgedab s

r q

p

o

n

i

k

l m

j

EN

10

3 Get started

Caution

Use of controls, or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this device. The model number and serial number are on the back of the device. Write the numbers here: Model No. __________________________ Serial No. ___________________________

Connect FM antenna

Tip

For optimal reception, fully extend and adjust the position of the antenna.

Connect the supplied FM antenna to the FM =-+%= jack on the back of the main unit.

n DBB ?{||{||

on/off.

o +-$-=6)>??- Q"

p @HL Turn the Living Sound effect on/off.

q DOCK Select iPod/iPhone/iPad source.

r $+--6)=# / Select a preset radio station. Skip to previous/next album. Navigate through the iPod/iPhone/

iPad menu.

s TUNER/RDS Select FM source. {{{

information.

EN

11

En gl

is h

2 Insert 2 AAA batteries with correct ~Q"

3 Close the battery compartment.

Note

If you are not going to use the remote control for a long time, remove the batteries.

Do not use old and new or different types of batteries in combination.

Batteries contain chemical substances, so they should be disposed of properly.

Set clock 1 In standby mode, press and hold PROG/

<"<'-6 for more than two seconds to activate the clock setting mode.

The 12 hour or 24 hour format is displayed.

2 Press / to select 12 hour or 24 hour format, and then press PROG/ <"<'-6.

The hour digits are displayed and begin to blink.

a

b

c

Connect power

Caution

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.

Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord.

Before connecting the AC power cord, ensure you have completed all other connections.

Connect the power cord to: the AC~MAINS jack on the back of the

main unit. the wall outlet.

Prepare the remote control

Caution

Risk of explosion! Keep batteries away from %%";! "

To insert the remote control battery: 1 Open the battery compartment.

EN

12

4 Play

Play from disc 1 Press CD on the remote control or press

SRC repeatedly on the main unit to select CD source.

2 Insert a disc into the disc compartment with the printed side facing right.

?"< not, press .

Press EJECT to take the disc out of the disc tray.

Play iPod/iPhone/iPad You can enjoy audio from iPod/iPhone/iPad through this docking system.

Compatible iPod/iPhone/iPad The unit supports the following iPod/iPhone/ iPad models. Made for iPad 2

3 Press / to set the hour, and then press $+";)<"<'-6.

The minute digits are displayed and begin to blink.

4 Press / to set the minute. 5 Press $+";)<"<'-6"

Turn on Press .

The unit switches to the last selected source.

Switch to standby Press again to switch the unit to standby mode.

The backlight on the display panel is reduced.

?$ panel.

To switch to Eco power standby mode: Press and hold for more than two seconds.

The backlight on the display panel turns off.

To switch between normal standby mode and Eco power standby mode: Press and hold for more than two seconds.

Note

If no button is pressed over 15 minutes in standby mode, this device goes to Eco power standby mode automatically.

EN

13

En gl

is h

The audio in connected iPod/iPhone/ iPad streams from this docking system automatically. If not, press .

To navigate the menu: press MENU, and press / / / to select, and then press OK"

Charge the iPod/iPhone/iPad When the unit is connected to power, the docked iPod/iPhone/iPad begins to charge automatically.

Note

iPod with color display, iPod classic, and iPod with video are not compatible with dock charging.

Remove the iPod/iPhone/iPad Pull the iPod/iPhone/iPad out of the dock.

iPad iPhone 4 iPhone 3GS iPhone 3G iPhone iPod classic iPod with video iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th

iPod touch (1st, 2nd, 3rd, and 4th

$)$)$ Place the iPod/iPhone/iPad in the dock.

$)$)$

Note

Make sure that your iPod/iPhone/iPad has been loaded securely.

1 Press DOCK on the remote control or press SRC repeatedly on the main unit to select iPod/iPhone/iPad source.

2 Play audio on your iPod/iPhone/iPad.

EN

14

5 Play options

Pause/resume play During play, press to pause/resume play.

Stop play During play, press to stop play.

Skip to a track For CD: 1 Press / to select another track.

To select a track directly, press a key on the numerical keypad.

For MP3 disc and USB: 1 Press / to select an album or folder. 2 Press / $"

Search within a track 1 During play, press and hold / to

search within a track. 2 Release to resume normal play.

+QLVXQZ[ 1 During play, press +-$-=6)>??-

repeatedly to select: >?$

played repeatedly. >*$

played repeatedly. >*$

a random sequence.

Play from USB

Note

Ensure that the USB device contains playable audio content.

1 Press USB on the remote control or press SRC repeatedly on the main unit to select the USB source.

2 Insert the USB device into the ]| socket on the back of the unit.

?"< not, press .

EN

15

En gl

is h

radio

Tune to a radio station

Tip

For optimal FM reception, fully extend and adjust the position of the FM antenna.

1 Press TUNER on the remote control or press SRC repeatedly on the main unit to select the tuner source.

2 Press and hold / for more than two seconds.

[SEARCH]" The radio tunes to a station with

strong reception automatically.

3 Repeat step 2 to tune to more stations. To tune to a weak station, press /

reception.

Program radio stations

Tip

You can program a maximum of 20 preset radio stations.

Program radio stations automatically In tuner mode, press and hold PROG for more than two seconds to activate automatic program mode.

[AUTO SRCH" All available stations are programmed in

the order of waveband reception strength. ?

broadcast automatically.

2 To return to normal play, press REPEAT/ >??-Q mode is no longer displayed.

Note

?! activated at the same time.

!@ programmed tracks.

Program tracks You can program a maximum of 20 tracks. 1 In CD/USB mode, at the stop position,

press PROG to activate the program mode.

[PROG]!$ display.

2 For MP3/WMA tracks, press / to select an album.

3 Press / to select a track number, and then press PROG"

4 Repeat steps 2 to 3 to program more tracks.

5 Press to play the programmed tracks. During play, [PROG]

displayed. To erase the program, in the stop

position, press .

Display ID3 information In CD mode, during play, press ID3 to display the following information: Track number Play time Title name Artist name Album name

EN

16

7 Adjust sound

Adjust volume During play, press !"()* to increase/decrease the volume.

Adjust subwoofer volume During play, press !" on the main unit to increase/decrease the subwoofer volume.

Select a preset sound effect During play, press DSC repeatedly to select: _?=6` [ROCK]$ _<=%<` [JAZZ]' [POP]

Enhance bass During play, press DBB to turn on or off dynamic bass enhancement.

If DBB is activated, DBB feature is enabled.

Immerse music over a wider spot During play, press @HL to turn on or off the living sound effect.

If Living Sound is activated, is displayed.

Mute sound During play, press to mute or restore sound.

Program radio stations manually 1 Tune to a radio station. 2 Press PROG to activate program mode.

[PROG]!$ display.

3 Press / to allocate a number (1 to GJ% PROG"

The preset number and the frequency of the preset station are displayed.

4 Repeat the above steps to program other stations.

Note

To overwrite a programmed station, store another station in its place.

Select a preset radio station In tuner mode, press / to select a preset number. You can also press the numeric key to

select a preset number directly.

Display play information {{ that allows FM stations to show additional information. In tuner mode, press TUNER/RDS repeatedly to show RDS information.

EN

17

En gl

is h

Press --$)6%#-+" The alarm timer is set and activated.

Activate and deactivate the alarm timer In standby mode, press --$)6%#-+ repeatedly to activate or deactivate the alarm timer.

If the alarm timer is activated, is displayed If the alarm timer is deactivated,

disappears.

Note

If CD/USB/iPod/iPhone/iPad source is selected, but no disc is placed or no USB/iPod/iPhone/ iPad is connected, the FM TUNER is selected automatically.

{Z@| You can also listen to an external audio device through this docking system. 1 Press #$%&' to select MP3 link

source. 2 Connect the supplied MP3 link cable to:

the #$%&' jack on the back of the unit

the headphone jack on the device 3 Start to play the device. (See the device

"

8 Other features

Set the sleep timer This docking system can switch to standby automatically after a set period of time. 1 When the unit is turned on, press --$)

TIMER repeatedly to select a set period "

When sleep timer is activated, is displayed.

To deactivate sleep timer 1 Press --$)6%#-+ repeatedly until

[--$"?? " When sleep timer is deactivated,

disappears.

Set the alarm timer This docking system can be used as an alarm clock. You can select CD, FM TUNER, iPod/ iPhone/iPad, or USB as alarm source.

Note

Ensure that you have set the clock correctly.

1 In standby mode, press and hold --$) TIMER until [SET TIMER scrolls on the display.

2 Press CD, USB, DOCK, or TUNER to select a source.

3 Press --$)6%#-+" The hour digits are displayed and begin

to blink.

4 Press / to set the hour, and then press --$)6%#-+ again.

The minute digits are displayed and begin to blink.

5 Press / to set the minute.

EN

18

Tuner Tuning Range FM: 87.5 - 108

MHz Tuning grid 50 KHz Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio

<22 dBu <45 dBu

Search Selectivity <30 dBu Total Harmonic Distortion <3% Signal to Noise Ratio >45 dB

Speakers Speaker Impedance

6 ohm + 3 x 6 ohm

Speaker Driver 5.25 woofer + 3 x 2.75 full range

Sensitivity >82 dB/m/W

General information AC power 220 - 240 V, 50/60 Hz Standby Power Consumption

< 1 W

USB Direct Version 2.0/1.1 Load of USB JJ* Dimensions - Main Unit )&&{ 350 x 978 x 350 mm Weight - With Packing - Main Unit

15 kg 11.5 kg

9 Product information

Note

Product information is subject to change without prior notice.

Q|}|

=QZ} Rated Output Power

200 W

Frequency Response

100 Hz - 16 kHz, 3 dB

Signal to Noise Ratio

>70 dB

MP3 LINK Input <600 mV RMS

Disc Laser Type Semiconductor Disc Diameter 12 cm Support Disc CD-DA, CD-R, CD-

RW, MP3-CD, WMA- CD

Audio DAC 24 Bits / 44.1 kHz Total Harmonic Distortion

<1%

Frequency Response

60 Hz -16 kHz (44.1 $

S/N Ratio >65 dBA

EN

19

En gl

is h

USB playability information Compatible USB devices: ]|]|G"J]|" ]|]|G"J]|" memory cards (requires an additional

@$@

Supported formats: ]|[*?G%

[*?%[*?G>G! \!>GGJ^!

variable bit rate WMA v9 or earlier Directory nesting up to a maximum of 8

levels Number of albums/ folders: maximum 99 Number of tracks/titles: maximum 999 ID3 tag v2.0 or later File name in Unicode UTF8 (maximum

>G!

Unsupported formats: Empty albums: an empty album is an

album that does not contain MP3/WMA %@!@"

]$"[ &%)"\ @&" not played.

**X%)*%\X {)*"@%"%

"%"%" )*

Supported MP3 disc formats ISO9660, Joliet Maximum title number: 512 (depending

Maximum album number: 255 Supported sampling frequencies: 32 kHz,

44.1kHz, 48 kHz |>GG$!%

variable bit rates

EN

20

No disc detected Insert a disc. Check if the disc is inserted with printing

side right. Wait until the moisture condensation at

the lens has cleared. Replace or clean the disc. ]X{"

device has exceeded a certain limit. This phenomenon is not a malfunction.

? supported.

USB device not supported The USB device is incompatible with the

unit. Try another one.

Poor radio reception Increase the distance between the unit

and your TV or VCR. If the signal is too weak, adjust the

antenna or connect an external antenna for better reception.

Timer does not work Set the clock correctly. Switch on the timer.

Clock/timer setting erased Power has been interrupted or the power

cord has been disconnected. Reset the clock/timer.

10 Troubleshooting

Warning

Never remove the casing of this device.

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. "Q@") Philips, ensure that the device is nearby and the model number and serial number are available.

No power Ensure that the AC power plug of the

unit is connected properly. Ensure that there is power at the AC

outlet. To save power, the system switches

off automatically 15 minutes after track play reaches the end and no control is operated.

No sound or poor sound Adjust the volume.

No response from the unit Disconnect and reconnect the AC power

plug, and then turn on the unit again.

Remote control does not work |!%

select the correct source with the remote control instead of the main unit.

Reduce the distance between the remote control and the unit.

Insert the battery with its polarities (+/ "

Replace the battery. Aim the remote control directly at the

sensor on the front of the unit.

EN

2011 Koninklijke Philips E

Manualsnet FAQs

If you want to find out how the DCM5090/10 Philips works, you can view and download the Philips DCM5090/10 DCM5090 Docking Sound System User Manual on the Manualsnet website.

Yes, we have the User Manual for Philips DCM5090/10 as well as other Philips manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Philips DCM5090/10. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Philips DCM5090/10 DCM5090 Docking Sound System User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Philips DCM5090/10 DCM5090 Docking Sound System User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Philips DCM5090/10 DCM5090 Docking Sound System User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Philips DCM5090/10 DCM5090 Docking Sound System User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Philips DCM5090/10 DCM5090 Docking Sound System User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.