Philips AZ1021/05 AZ1021 CD Soundmachine User Manual PDF

1 of 14
1 of 14

Summary of Content for Philips AZ1021/05 AZ1021 CD Soundmachine User Manual PDF

AZ1021CD Soundmachine

Register your product and get support at

User Manual

AZ1021_05_CCR_Eng 12/7/08 16:35 Page 1










# $





AZ1021_05_CCR_Eng 12/7/08 16:35 Page 2


6 x R14 UM-2 C-CELLS


AZ1021_05_CCR_Eng 12/7/08 16:35 Page 3










AZ1021_05_CCR_Eng 12/7/08 16:35 Page 4

Important notes for users in the U.K.

Mains plug This apparatus is fitted with an approved 13 Amp plug.To change a fuse in this type of plug proceed as follows:

1. Remove fuse cover and fuse. 2. Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or BSI approved type. 3. Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 3 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 3 Amp.

Note:The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.

How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the colour markings iden- tifying the terminals in your plug, proceed as follows: Connect the blue wire to the terminal marked N or coloured black. Connect the brown wire to the terminal marked L or coloured red. Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow). Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.

Copyright in the U.K. Recording and playback of material may require consent. See Copyright Act 1956 and The Performers Protection Acts 1958 to 1972.

AZ1021_05_CCR_Eng 12/7/08 16:35 Page 5

English Controls/Power Supply

Congratulations on your purchase and wel- come to Philips!

To fully benefit from the support that Philips offers, register your product at

Supplied Accessories AC power cord

Top/front panels (See 1) 1 VOLUME adjusts volume level.

2 Source selector: CD,TUNER, OFF selects CD or radio source of sound

power off switch

3 Display shows the CD functions

4 2 ; starts or pause CD playback

11 / 2 2

selects the next/previous track

searches forwards/backwards (press and hold the button) within the current track

REPEAT repeats a track/ CD program/entire CD.

5 PROG programs tracks and reviews the program

6 LIFT TO OPEN opens/ closes the CD door.

7 TUNING tunes to radio stations

8 SHUFFLE plays all tracks in random order

9 BAND selects waveband

0 9 STOP stops CD playback;; erases a CD program

Back/bottom panel (See 2 and 3)

! Telescopic antenna - improves FM reception.

@ AC MAINS~ - inlet for power cord.

# DBB turns the bass enhancement on/off.

$ p 3.5 mm stereo headphone socket

Helpful hints: The speakers will be muted when headphones are connected to the set.

% Battery door open to insert 6 x 1.5V R-14/ UM-2/ C-cells

CAUTION - Visible and invisible laser radiation.

If the cover is open, do not look at the beam.

- High voltage! Do not open.You run the risk of getting an electric shock.The machine does not con- tain any user-serviceable parts.

- Modification of the product could result in hazardous radiation of EMC or other unsafe operation.

This set complies with the radio interference requirements of the European Community.

Power Supply Whenever convenient, use the power supply cord if you want to conserve battery life. Make sure you remove the plug from the set and wall outlet before inserting batteries.

Batteries (not included)

1 Open the battery door and insert 6 batteries, type R-14, UM-2 or C-cells, (preferably alkaline) with the correct polarity as indicated by the "+" and "" symbols inside the com- partment. (See 2)

2 Replace the battery door, making sure the bat- teries are firmly and correctly in place.The set is now ready to operate.

Batteries contain chemical substances, so they should be disposed of properly.

Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst:

Do not mix battery types: e.g. alkaline with car- bon zinc. Only use batteries of the same type for the set.

When inserting new batteries, do not try to mix old batteries with the new ones.

Remove the batteries if the set is not to be used for a long time.

AZ1021_05_CCR_Eng 12/7/08 16:35 Page 6

Using AC power WARNING:Always check you have com- pletely switched off the set, before you change or disconnect power supply.

1 Check if the power voltage, as shown on the type plate located on the bottom of the set, corresponds to your local power supply. If it does not, consult your dealer or service center.

2 Connect the power cord to the AC MAINS~ inlet and the wall socket.The set is now connected and ready for use.

3 To switch the set off completely, withdraw the power cord from the wall socket.

4 Install the unit near the AC outlet and where the AC power plug can be easily reached.

Disconnect the power cord from the wall socket to protect your set during heavy thunderstorms.

The type plate is located on the bottom of the set.

Helpful hints:

To avoid unnecessary energy consumption, always adjust the Source selector to OFF after using the set.

General operation

Switching on and off and selecting the function

1 To select your sound source, adjust the Source selector to: CD or TUNER.

2 To switch off the set, adjust the Source selector to OFF position.

Adjusting volume and sound

Adjust the sound with the VOLUME and DBB controls.

Radio reception 1 Adjust the Source selector to TUNER.

2 Adjust BAND to select your desired waveband, MW, or FM.

3 Turn TUNING to tune to a station.

Helpful hints:

To improve radio reception

For FM, extend, incline and turn the telescop- ic antenna for best reception. Reduce its length if the signal is too strong.

For MW, the set uses a built-in antenna. Direct this antenna for best reception by turning the whole set.

Power Supply General Operation / Tuner

AZ1021_05_CCR_Eng 12/7/08 16:35 Page 7

Playing a CD This CD player plays Audio Discs including

CD-Recordables (CD-R) and CD-Rewritables (CD-RW).

MP3, CD-ROM, CD-I, CDV,VCD, DVD or computer CDs are not possible for playback.


CDs encoded with copyright protection technologies by some record companies may be unplayable by this product.

1 Adjust the Source selector to CD.

2 Open the CD door, and insert a CD with the printed side facing up, then press the CD door gently to close.

Display shows --, and later the total number of tracks. (See 3)

3 Press 2; to start playback.

4 To pause playback, press 2;.

Display: 2 flashes. (See 4)

5 To resume, press 2; again.

6 To stop CD playback, press 9.

Helpful hints:

CD play will also stop when:

you open the CD door ;

you select TUNER or OFF sound source;

the CD has reached the end.

Selecting a different track Press 11 / 22 once or repeatedly until the

desired track number appears in the display. In the pause/stop position, press 2; to start


Finding a passage within a track

1 During playback, press and hold or . The CD is played at high speed and with

reduced volume. 2 When you recognize the passage you want,

release 11 / 22 to resume normal playback.

Helpful hints:

When your searching reaches the end of the last track, the CD goes to stop mode.

CD Player

AZ1021_05_CCR_Eng 12/7/08 16:35 Page 8

Programming track num- bers You may store up to 20 tracks in the desired sequence. If you like, store any track more than once.

1 In the stop position, press PROG to activate programming. Display: PROG and 00 flash. (See 5)

2 Press or to select your desired track number.

3 Press PROG to store the desired track number. Display: PROG and 00 flash for you to

program the next track..

4 Repeat steps 2 to 3 to select and store all desired tracks in this way. If you attempt to store more than 20

tracks, no track can be selected and the display shows --.

5 To play your program, press 2;.

Helpful hints :

When playback of your program comes to the stop position, your set will return to normal playback.To re-enter program mode, press PROG in the stop position.

Reviewing the program In the stop position, press PROG repeatedly to see your stored tracks.

Erasing a program You can erase the contents of the memory by:

in the stop position, press PROG to enter program mode, and then press 9.

selecting TUNER or OFF;

opening the CD door;

Different play modes: REPEAT. and SHUFFLE (See 6, 7) REPEAT You can play the current track or the whole disc repeatedly, and combine REPEAT modes with PROG (PROGRAM).

REP plays the current track continuously.

REP ALL repeats the entire CD/program

1 To select play mode, press REPT once or more. The display shows REP or REP ALL.

2 Press 2; to start playback if in the stop/pause position.

3 To return to normal playback, press REPT repeatedly until the modes are no longer dis- played. You can also press 9 to cancel your play


SHUFFLE You can play all the tracks in random order.

1 In the stop position, press SHUFFLE to switch on shuffle play. Display shows SHUF.

2 To switch off shuffle play, press 9.

Helpful hints: During the shuffle play, when REP function is

selected, it will play the current shuffled track repeatedly, or when the REP ALL function is selected, it will repeat the shuffle play of the entire CD.

CD Player

AZ1021_05_CCR_Eng 12/7/08 16:35 Page 9

CD player and CD handling If the CD player cannot read CDs correctly,

use a cleaning CD to clean the lens before taking the set to repair.

The lens of the CD player should never be touched!

Sudden changes in the surrounding temperature can cause condensation on the lens of your CD player. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates.

Always close the CD door to avoid dust on the lens.

To clean the CD, wipe in a straight line from the center towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc.

Never write on a CD or attach any stickers to it.

Safety information Place the set on a flat, hard and stable surface

so that the system does not tilt.

Do not expose the set, batteries, CDs to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight.

Where the MAINS plug or an appliance cou- pler is used as the disconnet device, the dis- connet device shall remain readily operable.

The apparatus shall not be exposed to drip- ping or splashing.

Adequate ventilation with a minimum gap of 15cm (6 inches) between the ventilation holes and surrounding surfaces is necessary to prevent heat build-up.

Do not cover the ventilation openings with items such as newspapers, table-cloths, cur- tains, etc.

No objects filled with liquids, such as vases, shall be placed on the apparatus.

No naked flame sources, such as lighted can- dles, should be placed on the apparatus.

The mechanical parts of the set contain self- lubricating bearings and must not be oiled or lubricated.

To clean the set, use a dry cloth. Do not use any cleaning agents containing alcohol, ammo- nia, benzene or abrasives as these may harm the housing.

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Maintenance & safety (See 8)

AZ1021_05_CCR_Eng 12/7/08 16:35 Page 10


Possible cause Remedy

No sound /power

Volume not adjusted Adjust the VOLUME Power cord not securely connected Connect the AC power cord properly Batteries dead/ incorrectly inserted Insert (fresh) batteries correctly Headphones connected to the set Disconnect headphones. CD contains non-audio files Press 11 / 22 once or more to skip to a CD

audio track, instead of the data file.

Display does not function properly / No reaction to operation of any of the controls Electrostatic discharge Switch off and unplug the set. Reconnect after a

few seconds

--, Er or 01 indication

No CD inserted Insert a CD CD badly scratched or dirty Replace/ clean CD, see Maintenance Laser lens steamed up Wait until lens has cleared CD-R/CD-RW is blank or not finalized Use a finalized CD-R/CD-RW or suitable CD

Audio disc only

Note: Make sure the CD is not encoded with Copyright protection technologies, as some do not conform to the Compact Disc stan- dard.

The CD skips tracks

CD damaged or dirty Replace or clean CD Program/shuffle is active Quit program/shuffle mode

Note: A CD badly scratch or dirty may result in improper operation.


If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre.

WARNING: Do not open the set as there is a risk of electric shock. Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee.

AZ1021_05_CCR_Eng 12/7/08 16:35 Page 11

Environmental information All unnecessary packaging material has been omitted.The packaging can be easily separated into three materials: cardboard, polystyrene and plastic.

Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging, dead batteries and old equipment.

Disposal of your old product

Your product is designed and manufactured with high quality materi- als and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.

Please inform yourself about the local separate collection system for electrical and electronic products.

Please act according to your local rules and do not dispose of your old products with your normal household waste.The correct disposal of your old product will help prevent potential negative consequences for the environment and human health.


Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230~240V / 50Hz Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . 12W Output power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 1 W RMS Dimensions (main unit) (w x h x d) . . . . . . . . . . . . 290 x 143 x 240 (mm) Weight (main unit) . . . . . . . . . . . . . . . . . . . . . . . . . 1.62 kg

AZ1021_05_CCR_Eng 12/7/08 16:35 Page 12

Hearing Safety Listen at a moderate volume.

Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss.

Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of sound. So after prolonged listening, what sounds "normal" can actually be loud and harmful to your hearing. To guard against this, set your volume to a safe level before your hearing adapts and leave it there.

To establish a safe volume level: Set your volume control at a low setting.

Slowly increase the sound until you can hear it comfortably and clearly, without distortion.

Listen for reasonable periods of time: Prolonged exposure to sound, even at normally "safe" levels, can also cause hearing loss.

Be sure to use your equipment reasonably and take appropriate breaks.

Be sure to observe the following guidelines when using your headphones. Listen at reasonable volumes for reasonable periods of time.

Be careful not to adjust the volume as your hearing adapts.

Do not turn up the volume so high that you can't hear what's around you.

You should use caution or temporarily discontinue use in potentially hazardous situations.

Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may create a traffic hazard and is illegal in many areas.

AZ1021_05_CCR_Eng 12/7/08 16:35 Page 13

Meet Philips at the Internet </

Manualsnet FAQs

If you want to find out how the AZ1021/05 Philips works, you can view and download the Philips AZ1021/05 AZ1021 CD Soundmachine User Manual on the Manualsnet website.

Yes, we have the User Manual for Philips AZ1021/05 as well as other Philips manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Philips AZ1021/05. Full manuals and user guide PDFs can be downloaded from

The best way to navigate the Philips AZ1021/05 AZ1021 CD Soundmachine User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Philips AZ1021/05 AZ1021 CD Soundmachine User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Philips AZ1021/05 AZ1021 CD Soundmachine User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Philips AZ1021/05 AZ1021 CD Soundmachine User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Philips AZ1021/05 AZ1021 CD Soundmachine User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.