Philips AX2300/00Z AX2300 CD Player User Manual PDF

1 of 4
1 of 4

Summary of Content for Philips AX2300/00Z AX2300 CD Player User Manual PDF

Portable CD Player

AX 2300 AX 2301

Audio

CLASS 1

LASER PRODUCT

Meet Philips at the Internet http://www.philips.com

Nederlands

English

Franais

Espaol

AX2300 AX2301

1

#

$

1

OPEN

VOL

E

O FF

R SU

M E HOLD

OUT

LINE

/

@

!

5

67

48

3

2 0

9

CLASS 1 LASER PRODUCT

4

4

9

2.

1.

OPEN VOL

E

OFF R SUME HOLD

OUT

LINE /

4 HOLD OFF 5 PLAY 6 VOL

E

/

9

E

/

4

4

9

OPEN

VOL

OUT NE

/

3 #

OPEN

VOL

OUT NE

/

9

OPEN

VOL

!!!

4

4

9

E

O FF

R SU

M E HOLD

LINE

/ OUT

OPEN

VOL

4

4

9

E

O FF

R SU

M E HOLD

LINE

/ OUT

OPEN

VOL

4

4

9 E

O FF R

S U M E HO

LD

LINE

/

OUT

2 p1

QUICK START MISE EN SERVICE RAPIDE

English CONTROLS / POWER SUPPLY

1 OPEN 2 ..............opens the CD lid 2 .......................skips and searches CD tracks backwards 3 .......................skips and searches CD tracks forwards 4 DBB.....................switches the bass enhancement on and off. This button also

switches acoustic feedback (the beep) on/off when it is pressed for more than 2 seconds

5 PROG...................programs tracks and reviews the program 6 ............................display 7 MODE .................selects the different playing possibilities: SHUFFLE,

SHUFFLE REPEAT ALL, REPEAT, REPEAT ALL and SCAN 8 9.........................stops CD play, clears a program or switches the player off 9 2; ......................switches the player on, starts or pauses CD play 0 RESUME .............stores the last position of a CD track played

HOLD...................locks all buttons OFF......................switches RESUME and HOLD off

! LINE OUT/p........3.5 mm headphone socket, socket to connect the player to another audio input of an additional appliance.

@ VOL E ............adjusts the volume # 4.5V DC...............socket for external power supply $ ............................type plate

CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure.

POWER SUPPLY / GENERAL INFORMATION

Use only the AY 3170 adapter (4.5 V / 300 mA direct current, positive pole to the center pin). Any other product may damage the player. 1 Make sure the local voltage corresponds to the power

adapters voltage.

2 Connect the power adapter to the 4.5V DC socket of the player and to the wall socket.

Note: Always disconnect the adapter when you are not using it.

Environmental information

All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into two materials: cardboard (box) and polyethylene (bags, protective foam sheet).

Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment.

CLASER P

This product complies with the radio interference requirements of the European Union.

Batteries (supplied or optionally available)

You can use the following batteries with this CD-player: normal batteries type LR6, UM3 or AA (preferably Philips), or alkaline batteries type LR6, UM3 or AA (preferably Philips). Notes: Old and new or different types of batteries should not be combined.

Remove batteries if they are empty or if the player is not going to be used for a long time.

Inserting batteries 1 Push OPEN 2 to open the CD lid.

2 Open the battery compartment and insert either 2 normal or alkaline batteries.

Battery indication The approximate power level of your batteries is shown in the display.

Battery full

Battery two-thirds full

Battery one-third full

Battery dead or empty.When the batteries are dead or empty, the symbol A flashes, bAtt is displayed, and the beep tone sounds repeatedly.

Batteries contain chemical substances, so they should be disposed of properly.

Do not touch the lens A of the CD player. Do not expose the unit, batteries or CDs to humidity,

rain, sand or excessive heat (caused by heating equipment or direct sunlight).

You can clean the CD player with a soft, slightly dampened, lint-free cloth. Do not use any cleaning agents as they may have a corrosive effect.

To clean the CD, wipe it in a straight line from the center toward the edge using a soft, lint-free cloth. A cleaning agent may damage the disc! Never write on a CD or attach a sticker to it.

The lens may cloud over when the unit is moved suddenly from cold to warm surroundings. Playing a CD is not possible then. Leave the CD player in a warm environment until the moisture has evaporated.

Active mobile phones in the vicinity of the CD player may cause malfunctions. Avoid dropping the unit as this may cause damage.

Headphones HE 035 Connect the supplied headphones to the LINE OUT/p

jack of the player.

Note: LINE OUT/p can also be used for connecting this set to your HiFi system.To adjust the sound and volume, use the controls on the connected audio equipment and on the CD player.

IMPORTANT! Hearing safety: Do not play your headphones at a high volume. Hearing experts advise that continuous use at high volume can permanently damage your hearing. Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard and it is illegal in many countries. Even if your headphones are an open-air type designed to let you hear outside sounds, do not turn up the volume so high that you cannot hear what is going on around you.

VOL

E

O FF

R SU

M E HOLD

OUT

LINE

/

CD player and CD handling

GENERAL INFORMATION / CD PLAY

Only use the AY 3545 (4822 219 10033) or AY 3548 (3140 118 71890) car voltage converter (4.5 V DC, positive pole to the centre pin) and the AY 3501 car adapter cassette. Any other product may damage the set.

1 Put the set on a horizontal, vibration-free and stable surface. Make sure it is in a safe place, where the set is neither a danger nor an obstacle to the driver and the passengers.

2 Plug the voltage converter into the cigarette lighter socket (only for 12 V car battery, negative grounding), then connect the wired end with 4.5V DC input socket on the set.

3 If necessary, clean the cigarette lighter socket to obtain a good electrical contact.

4 Turn down the volume and connect the cassette adapter plug to LINE OUT/p on the set.

5 Carefully insert the cassette adapter into the car radios cassette compartment.

6 Make sure the cord does not hinder your driving.

7 Decease the volume on the set, if necessary. Start playback on the set and adjust the sound with the car radio controls.

Always remove the voltage converter from the cigarette lighter socket when the set is not in use.

Note: If your car radio has a LINE IN socket , it is better to use it for the car radio connection instead of the cassette adapter. Connect the signal lead to this LINE IN socket and to LINE OUT/p on the set.

4,5 V DC

12 V DC

OPEN

VOL

E

O FF

R SU

M E HOLD

OUT

LINE

/

4

4

9

In-car use (connections supplied or optionally available)

CD PLAY / FEATURES

If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded properly, nF dISC is displayed, indicating that the CD has not been finalized. In that case, use FINALIZE on your CD recorder to complete the recording.

When playing a CD-Rewritable (CD-RW), please note that it takes 315 seconds after pressing 2; for sound reproduction to start.

Playback will stop if you open the CD lid.

While the CD is read, 01 --:-- flashes in the display.

Volume and bass

Volume adjustment Adjust the volume by using VOL E.

Bass adjustment Press DBB to switch the bass enhancement on or

off yDBB appears if the bass enhancement is

activated.

D B B

Playback information

This CD-player can play all kinds of Audio Discs such as CD-Recordables and CD-Rewritables. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CD.

1 Push the OPEN 2 slider to open the player.

2 Insert an audio CD, printed side up, by pressing the CD onto the hub.

3 Close the player by pressing the lid down.

4 Press 2; to switch the player on and start playback. yThe current track number and elapsed playing

time are displayed.

You can pause playback by pressing 2;. yThe time at which playback was paused starts

flashing.

You can continue playback by pressing 2; again.

5 Press 9 to stop playback. yThe total number of tracks and the total playing

time of the CD are displayed.

6 Press 9 again to switch the player off.

To remove the CD, hold it by its edge and press the hub gently while lifting the CD.

Note: If there is no activity, the set will automatically switch off after a while to save energy.

3

OPEN

VOL

OUT LINE

/

4

4

9

E

/

4

4

9

E S P

E S P

0

Playing a CD

Selecting a track during playback Briefly press or once or several times to skip to the current, previous or

next track. yPlayback continues with the selected track, and

the tracks number is displayed.

Selecting a track when playback is stopped 1 Briefly press or once or several times to select

the desired track. The track number is displayed.

2 Press 2; to start CD play. yPlayback starts with the selected track.

Searching for a passage during playback 1 Keep or pressed to find a particular passage in

a backward or forward direction. ySearching starts while playback continues at low

volume. After 2 seconds the search speeds up.

2 Release the button when you reach the desired passage. yPlayback continues from this position.

Notes: If the player is in SCAN mode (see MODE chapter), searching is not possible.

In shuffle, shuffle repeat all or repeat mode (see MODE chapter), or while playing a program, searching is only possible within the particular track.

4

4

9

Selecting a track and searching

FEATURES

You can store up to 30 tracks to play in a program. A single track may be stored more than once in the program.

1 While playback is stopped, select a track with or .

2 Press PROG to store the track. yPROG lights up; the track number

programmed and P with the total number of stored tracks are displayed.

3 Select and store all desired tracks in this way.

4 Press 2; to start playback of your selected tracks. yPROG is shown and playback starts.

You can review the program by pressing PROG for more than 2 seconds.

yThe display shows all the stored tracks in sequence.

Notes: If you press PROG and there is no track select- ed, SELECt is displayed.

If you try to store more than 30 tracks, FULL is displayed.

Clearing the program While playback is stopped, press 9 to clear program.

yCLEAr is displayed once, PROG goes off, and the program is cleared.

Note: The program will also be cleared if the power supply is interrupted, or if the CD-player lid is opened, or if the set switches off automatically.

4

E S P PROG

E S P

E S P PROG

Programming track numbers

FEATURES / TROUBLESHOOTING

You can interrupt playback and continue (even after an extended period of time) from the position where playback stopped (RESUME) and you can lock all buttons of the set so that no action will be executed (HOLD). Use the RESUMEHOLDOFF slider for these functions.

RESUME continuing from where you have stopped 1 Switch the slider to RESUME during playback to acti-

vate RESUME. yRESUME is shown.

2 Press 9 whenever you want to stop playback. 3 Press 2; whenever you want to resume playback.

yRESUME is shown and playback continues from where you have stopped.

To deactivate RESUME, switch the slider to OFF. yRESUME goes off.

HOLD locking all buttons You can lock the buttons of the set by switching the slider to HOLD. Now, when a key is pressed, no action will be executed. This is of use, for example, when transporting the player in a bag. With HOLD activated, you can avoid accidental activation of other functions.

1 Switch the slider to HOLD to activate HOLD. yAll buttons are locked. HoLd is shown when

you press any button. If the set is switched off, HOLD will be shown only when 2; is pressed.

2 To deactivate HOLD, switch the slider to OFF.

Note: If you deactivate HOLD by switching the slider to RESUME, you will be activating the RESUME function.

E S P

RESUME

E S P HOLD

RESUME and HOLD

It is possible to play tracks in random order, to repeat a single track or the entire CD, and to play the first few seconds of each track. 1 Press MODE during playback as often as required in

order to activate one of the following modes. The active mode is shown in the display. ySHUFFLE : All tracks of the CD are played in

random order until all of them have been played once.

ySHUFFLE REPEAT ALL : All tracks of the CD are played repeatedly in random order.

yREPEAT : The current track is played repeatedly. yREPEAT ALL : The entire CD is played repeatedly.

y SCAN: The first 10 seconds of each of the remaining tracks are played in sequence.

2 Playback starts in the chosen mode after 2 seconds. To return to normal playback, press MODE repeatedly until the display shows

no active modes.

ESP

With a conventional portable CD-player you might have experienced that the music stopped e.g. when you were jogging. The Electronic Skip Protection prevents loss of sound caused by light vibrations and shocks. Continuous playback is ensured. However ESP does not prevent playback interruptions during vigorous running. It also does not protect the unit against any damage caused by dropping! In this set ESP is default ON. It is possible to set ESP off. Press MODE for more than 2 seconds.

y ESP disappears. Press MODE again for more than 2 seconds.

y ESP is displayed.

ESP on ESP off ESP on

E S P SHUFFLE

REPEAT ALL

Selecting different playing possibilities-MODE

WARNING: Under no circumstances should you try to repair the set yourself as this will invalidate the warranty. If a fault occurs, first check the points listed, before taking the unit for repair. If you are unable to solve a problem by following these hints, consult your dealer or service center.

The CD player has no power, or playback does not start Check that your batteries are not dead or empty, that they are inserted

correctly, that the contact pins are clean. Your adapter connection may be loose. Connect it securely. For in-car use, check that the car ignition is on. Also check players batteries.

The indication no diSC is displayed Check that the CD is clean and correctly inserted (label-side upward). If your lens has steamed up, wait a few minutes for this to clear.

The indication nF diSC is displayed CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder.

The indication HOLD is on and/or there is no reaction to controls If HOLD is activated, then deactivate it. Electrostatic discharge. Disconnect power or remove batteries for a few seconds.

The CD skips tracks The CD is damaged or dirty. Replace or clean the CD. RESUME, SHUFFLE or PROGRAM is active. Switch off whichever is on.

No sound or bad sound quality. PAUSE might be active. Press 2;. Loose, wrong or dirty connections. Check and clean connections. Volume might not be appropriately adjusted. Adjust the volume. Strong magnetic fields. Check players position and connections. Also keep

away from active mobile phones. For in-car use,

Manualsnet FAQs

If you want to find out how the AX2300/00Z Philips works, you can view and download the Philips AX2300/00Z AX2300 CD Player User Manual on the Manualsnet website.

Yes, we have the User Manual for Philips AX2300/00Z as well as other Philips manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Philips AX2300/00Z. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Philips AX2300/00Z AX2300 CD Player User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Philips AX2300/00Z AX2300 CD Player User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Philips AX2300/00Z AX2300 CD Player User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Philips AX2300/00Z AX2300 CD Player User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Philips AX2300/00Z AX2300 CD Player User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.