Philips AEA2700/12 AEA2700 Adapter User Manual PDF

1 of 14
1 of 14

Summary of Content for Philips AEA2700/12 AEA2700 Adapter User Manual PDF

www.philips.com/support

User manual

Always there to help you Register your product and get support at

AEA2700 Question? Contact Philips

1EN

Contents 1 Safety 2

2 Your Bluetooth Adapter 3 Introduction 3 What's in the box 3

3 Before use 4 Connect audio cables 4 Connect power 5

4 Use the Bluetooth adapter 6 Connect a Bluetooth device 6 Disconnect a device 7 Reconnect a device 7 Clear pairing history 7

5 Product information 8 Amplifier 8 Bluetooth 8 General information 8

6 Troubleshooting 9 General 9 About Bluetooth device 9

7 Notice 10 Compliance 10 Care of the environment 10 Trademark notice 10 Copyright 11

2 EN

1 Safety Read these instructions. Follow all instructions. Do not use this apparatus near water. Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatus(includingamplifiers)thatproduce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Onlyuseattachments/accessoriesspecifiedby the manufacturer. Use only power supplies listed in the user manual. The product shall not be exposed to dripping or splashing. Do not place any sources of danger on the product(e.g.liquidfilledobjects,lighted candles). Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable.

Warning

Never remove the casing of this apparatus. Never lubricate any part of this apparatus. Never place this apparatus on other electrical

equipment. Keep this apparatus away from direct sunlight, naked flamesorheat.

Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the power.

3EN

2 Your Bluetooth Adapter

Congratulations on your purchase and welcome toPhilips!Tofullybenefitfromthesupportthat Philips offers, register your product at www. philips.com. If you contact the Consumer Care, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the product. Write the numbers here: Model No. __________________________ Serial No. ___________________________

Introduction By connecting the Bluetooth adapter to your Hi-Fispeakersystem,youcanenjoyaudiofrom your Bluetooth-enabled device on your Hi-Fi system through Bluetooth wireless connection.

What's in the box Check and identify the contents of your package: Main unit Safety sheet Short user manual AC power adapter RCA audio cable

AJ1003

Short User Manual

www.philips.com/welcome

Always there to help you Register your product and get support at

Question? Contact Philips

4 EN

3 Before use Always follow the instructions in this chapter in sequence.

Connect audio cables There are three ways to connect the Bluetooth adaptertoyourHi-Fisystem.Selectonefitfor the Hi-Fi system.

Option 1: Connect through the AUX OUT socket

Connect the RCA audio cable between the AUX OUT socket on the Bluetooth

adapter, and the analogue audio input sockets on your

Hi-Fi system.

Option 2: Connect through the COAXIAL OUT socket

L R

Connect a coaxial audio cable between the COAXIAL OUT socket on the

Bluetooth adapter, and the coaxial audio input socket on your

Hi-Fi system.

Note

Make sure that no cable is plugged in the AUX OUT socket.

Option 3: Connect through the OPTICAL OUT socket

Connect an optical audio cable between the OPTICAL OUT socket on the

Bluetooth adapter, and the optical audio input sockets on your

Hi-Fi system.

Note

Make sure that no cable is plugged in the AUX OUT socket.

OPTICAL OUT

5EN

Connect power Caution

Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit.

Risk of electric shock! Hold the plug securely when unplugging the device.

Note

The type plate is located on the bottom of the Bluetooth adaptor.

Connect the power adaptor to: the DC IN socket at the back of the

Bluetooth adapter. the wall outlet.

6 EN

4 Use the Bluetooth adapter

Connect the Bluetooth adapter to your Hi-Fi system with audio cable, and then you can stream audio from your Bluetooth device to the Hi-Fi system via Bluetooth.

Connect a Bluetooth device

Note

WOOX Innovations does not guarantee the compatibility with all Bluetooth devices.

Before pairing a device with this product, read its user manual for Bluetooth compatibility. Make sure that the connected Bluetooth device supports the Advanced AudioDistributionProfile(A2DP)andtheAudioVideo RemoteControlProfile(AVRCP).

The product can connect a maximum of 3 Bluetooth devices simultaneously.

Make sure that Bluetooth function is enabled on your device, and your device is set as visible to all other Bluetooth devices.

The operational range between this product and a Bluetoothdeviceisapproximately10meters(33feet).

Any obstacle between this product and a Bluetooth device can reduce the operational range.

Keep away from any other electronic device that may cause interference.

Bluetooth indicator The LED Bluetooth indicator in the button indicates the status of Bluetooth connection.

Indicator Bluetooth connection Blinking blue in 1 Hz

Connecting with a paired device

Blinking blue in 4 Hz

Waiting for pairing

Solid blue Connected Dim light Disconnected

Enter Bluetooth pairing mode When connected to power, the Bluetooth

adapter tries to connect with the last paired device. If no device is paired, the Bluetooth adapter enters Bluetooth pairing mode automatically.

Afterwards press and hold for 2 seconds to enter Bluetooth pairing mode.

Note

If Bluetooth pairing fails in 15 minutes, the Bluetooth adapter exits the pairing mode.

Connect manually

1 Press and hold for 2 seconds to switch this Bluetooth adapter to pairing mode. The Bluetooth indicator in the button

blinks in 4 Hz.

2 On your Bluetooth device, enable the Bluetooth feature and search for devices.

3 In the device list, select PHILIPS AEA2700. If a message prompts for the

permission for Bluetooth connection with PHILIPS AEA2700,confirmit.

If a password is required, enter 0000 andthenconfirm.

Connect easily by NFC If your Bluetooth device supports NFC (Near FieldCommunication),youcanconnectitwith this product easily. 1 On your device, enable NFC and

Bluetooth functions. 2 Tap the back of your Bluetooth device at

the NFC tag on this product. 3 On your Bluetooth device, follow the on-

screen instructions to complete the pairing and connection.

7EN

Connect a fourth Bluetooth device Connect the fourth device manually (see

'Connectmanually'onpage6). Press and hold for 2 seconds to switch

AEA2700 to pairing mode, and then connect the fourth Bluetooth device by NFC (see 'Connect easily by NFC' on page6). Once the fourth device is connected,

the earliest connected device will be replaced, if there is no music play.

Disconnect a device On your device, disable the Bluetooth

connection with this product. If the Bluetooth connection is activated

by NFC, tap the back of your Bluetooth device at the NFC tag on this product.

Reconnect a device For a paired Bluetooth device on which

the automatic reconnection is enabled, this product reconnects with it once it is detected.

For a paired Bluetooth device that does not support the automatic reconnection, reconnect it with this product manually.

Clear pairing history Press and hold for 5 seconds.

The connected speaker beeps three times.

8 EN

5 Product information

Note

Productinformationissubjecttochangewithoutprior notice.

Amplifier OutputVoltage 1000mVRMS Frequency Response 20 Hz - 20 kHz,

3 dB Signal to Noise Ratio > 62 dB Total Harmonic Distortion < 1 %

Bluetooth Standard BluetoothStandardVersion3.0 Frequency Band

2.402~2.480 GHzISM Band

Range 10m(freespace)

General information AC Power Model: AS030-090-

EE033/EML0900330V (Philips) Input:100-240V~, 50/60 Hz, 0.15 A Output:9V 0.33 A

Operation Power Consumption

< 3 W

Standby Power Consumption

< 0.5 W

Dimensions - Main Unit (WxHxD)

74 x 28 x 72 mm

Weight - Main Unit 0.04 kg

9EN

6 Troubleshooting Warning

Never remove the casing of this product.

To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support).Whenyoucontactthe Consumer Care, make sure that the product is nearby and the model number and serial number are available.

General No power Make sure that the AC power adapter is

connected properly. Make sure that there is power at the AC

outlet. No sound from your Hi-Fi system Check if the Hi-Fi system is connected to

power. Make sure that the system is connected

with the Bluetooth adapter properly. Make sure that the Bluetooth wireless

connection is successful. Adjustthevolumeofyoursystemand

Bluetooth device. Make sure that the Hi-Fi system is in

Audio-in or line-in mode.

About Bluetooth device The audio quality is poor after connection with a Bluetooth-enabled device. The Bluetooth reception is poor. Move the

device closer to the Bluetooth adaptor or remove any obstacle between the device and the adaptor.

Cannot connect with the device. The Bluetooth function of the device is not

enabled. Refer to the user manual of the device for how to enable the function.

The adapter is already connected with another Bluetooth-enabled device. Disconnect that device and then try again.

The paired device connects and disconnects constantly. The Bluetooth reception is poor. Move the

device closer to the Bluetooth adapter or remove any obstacle between the device and the adapter.

For some devices, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of the system.

10 EN

7 Notice Anychangesormodificationsmadetothis device that are not expressly approved by WOOX Innovations may void the users authority to operate the equipment.

Compliance

This product complies with the radio interference requirements of the European Community. Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions ofDirective1999/5/EC.Youcanfindthe Declaration of Conformity on www.philips.com/ support.

Care of the environment Disposal of your old product and battery

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

This symbol on a product means that the product is covered by European Directive 2012/19/EU. Inform yourself about the local separate collection system for electrical and electronic products.

Follow local rules and never dispose of the product with normal household waste. Correct disposal of old products helps prevent negative consequences for the environment and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separateintothreematerials:cardboard(box), polystyrenefoam(buffer)andpolyethylene (bags,protectivefoamsheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Trademark notice The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by WOOX Innovations is under license.

The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.

11EN

Copyright 2014 WOOX Innovations Limited. All rights reserved. Philips and the Philips Shield Emblem are registeredtrademarksofKoninklijkePhilipsN.V. and are used by WOOX Innovations Limited underlicensefromKoninklijkePhilipsN.V. Specificationsaresubjecttochangewithout notice. WOOX reserves the right to change products at any time without being obliged to adjustearliersuppliesaccordingly.

Specifications are subject to change without notice. 2014 WOOX Innovations Limited. All rights reserved. This product was br

Manualsnet FAQs

If you want to find out how the AEA2700/12 Philips works, you can view and download the Philips AEA2700/12 AEA2700 Adapter User Manual on the Manualsnet website.

Yes, we have the User Manual for Philips AEA2700/12 as well as other Philips manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Philips AEA2700/12. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Philips AEA2700/12 AEA2700 Adapter User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Philips AEA2700/12 AEA2700 Adapter User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Philips AEA2700/12 AEA2700 Adapter User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Philips AEA2700/12 AEA2700 Adapter User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Philips AEA2700/12 AEA2700 Adapter User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.