Contents

Philips AEA2000/12 AEA2000 Adapter User Manual PDF

1 of 9
1 of 9

Summary of Content for Philips AEA2000/12 AEA2000 Adapter User Manual PDF

www.philips.com/support

AEA2000

Always there to help you

User Manual

Question? Contact Philips

Register your product and get support at

2EN

Contents 1 Important 3

2 Your Bluetooth Adapter 3 Introduction 3 What's in the box 3

3 Play 4 Connect audio cables 4 Connect power 4 Enter pairing mode 4 Play from Bluetooth-enabled devices 5

4 Product information 6 Specifications 6

5 Troubleshooting 6 AboutBluetoothdevice 6

6 Notice 7 Recycling 7

3 EN

1 Important Read these instructions. Follow all instructions. Do not use this apparatus near water. Do not place near any heat sources such

as radiators, heat registers, stoves, or otherapparatus(includingamplifiers)that produce heat.

Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Onlyuseattachments/accessoriesspecified by the manufacturer.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Referallservicingtoqualifiedservice personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing.

Do not place any sources of danger on the apparatus(e.g.liquidfilledobjects,lighted candles).

Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable.

Warning

Never remove the casing of this apparatus. Never place this apparatus on other electrical

equipment. Ensure that you always have easy access to the power

cord, plug or adaptor to disconnect the apparatus from the power.

2 Your Bluetooth Adapter

Introduction By connecting the Bluetooth adapter to your Hi-Fi speaker system, you can enjoy audio from your Bluetooth-enabled device on your Hi-Fi system through Bluetooth wireless connection.

What's in the box Check and identify the contents of your package: Main unit AC power adaptor RCA audio cable User manual

4EN

3 Play Always follow the instructions in this chapter in sequence.

Connect audio cables There are two ways to connect the Bluetooth adaptortoyourHi-Fisystem.Selectonefitfor the Hi-Fi system.

Option 1 (Fig. A)

Option 2 (Fig. B)

AUDIO IN

LR

LLINE OUT R

Connect power Caution

Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit.

Risk of electric shock! Hold the plug securely when unplugging the device.

Note

The type plate is located on the bottom of the Bluetooth adaptor.

Connect the power adaptor to: the DC IN socket at the back of the

Bluetooth adapter. the wall outlet.

Enter pairing mode When connected to power, the Bluetooth adaptor goes to Bluetooth pairing mode automatically. If your Bluetooth device has not been

paired with the Bluetooth adapter before, you need pair with the Bluetooth adapter first,thenplayaudioonthedevice(See the section Play from Bluetooth-enabled devices).

5 EN

If your Bluetooth device has been paired with the Bluetooth adapter before, press .

The Bluetooth adapter attempts to connect the previously connected Bluetooth device. If it fails, the adapter returns to the pairing mode.

Tip

If the Bluetooth adapter fails to pair with a Bluetooth device, the Bluetooth adapter exits the pairing mode in 2 minutes, and the LED light becomes dim. You can press to return to pairing mode.

LED indications

Description

Solid blue The Bluetooth adapter and your Bluetooth-enabled device are connected.

Flashing blue

The Bluetooth adapter is waiting to be paired with a Bluetooth- enabled device.

Dim light The Bluetooth adapter is neither in connection with a Bluetooth device nor in the pairing mode.

Play from Bluetooth-enabled devices

Note

The effective operating range between the Bluetooth adapter and the paired device is approximately 10 meters(30feet).

Keep this Bluetooth adapter away from other electronic devices that may cause interference.

Compatibility with all Bluetooth devices is not guaranteed.

Make sure that the Bluetooth adapter is connected to the powered Hi-Fi system correctly.

Make sure that your Hi-Fi system is in Audio-in or line-in mode.

1 On your Bluetooth device, turn on Bluetooth function and search for Bluetooth devices (refer to the device's usermanual).

2 When [PhilipsBT] (Philips Bluetooth adapter)isdisplayedonyourdevice, select it to start pairing and connection. If necessary, enter default password 0000. If connection is successful, the

Bluetooth indicator becomes solid blue.

3 Play audio on your device. Audio streams from your device to

your Hi-Fi system.

Note

If your Bluetooth device has been paired with AEA2000 before,youjustneedtofindout[PhilipsBT] on your Bluetooth menu, then start the connection.

This Bluetooth adaptor can memorize up to 8 previously paired devices.

To disconnect the Bluetooth-enabled device: Press again; Tap [PhilipsBT] on the Bluetooth menu

again; Deactivate Bluetooth function on your

device; or Move the device beyond the

communication range.

To connect another Bluetooth device: 1 Disconnect the previously connected

device. 2 Pair with your selected Bluetooth device.

To clear pairing history in the Bluetooth adapter: Press and hold for 7 seconds. The Bluetooth indicator stays in solid blue

for 2 seconds, then returns to the previous status.

6EN

4 Product information

Note

Product information is subject to change without prior notice.

Specifications

Amplifier Output Voltage 1000 mV RMS Signal to Noise Ratio >62dBA Total Harmonic Distortion < 2 %

Bluetooth Standard Bluetooth Standard Version

2.1+EDR Frequency Band 2.402~2.480 GHzISM Band Range 10m(freespace)

General information AC Power Model: AS030-090-

EE033/EML0900330V (Philips); Input: 100-240 V ~, 50/60Hz,0.15A; Output: 9 V 0.33 A

Operation Power Consumption

< 3 W

Dimensions - Main Unit (WxHxD)

74 x 28 x 72 mm

Weight - Main Unit 0.04 kg

5 Troubleshooting Warning

Never remove the casing of this device.

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support).Whenyoucontact Philips, make sure that the device is nearby and the model number and serial number are available.

No power Make sure that the AC power adapter is

connected properly. Make sure that there is power at the AC

outlet.

No sound from your Hi-Fi system Check if the Hi-Fi system is connected to

power. Make sure that the system is connected

with the Bluetooth adapter properly. Make sure that the Bluetooth wireless

connection is successful. Adjust the volume of your system and

Bluetooth device. Make sure that the Hi-Fi system is in

Audio-in or line-in mode.

About Bluetooth device

The audio quality is poor after connection with a Bluetooth-enabled device. The Bluetooth reception is poor. Move the

device closer to the Bluetooth adaptor or remove any obstacle between the device and the adaptor.

7 EN

Cannot connect with the device. The Bluetooth function of the device is not

enabled. Refer to the user manual of the device for how to enable the function.

The adapter is already connected with another Bluetooth-enabled device. Disconnect that device and then try again.

The Bluetooth-enabled device might be cleared from pairing history. Follow steps below to re-pair : 1)Unplugthepowerfortheproduct (AEA200)andthenre-connect. 2)Selectignore this device on your Bluetooth-enabled devices setup menu, then select [Philips BT] for pairing again.

The paired device connects and disconnects constantly. The Bluetooth reception is poor. Move the

device closer to the Bluetooth adapter or remove any obstacle between the device and the adapter.

For some devices, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of the system.

6 Notice Anychangesormodificationsmadetothis device that are not expressly approved by Gibson Innovations may void the users authority to operate the equipment.

This product complies with the radio interference requirements of the European Community. A copy of the EC declaration of Conformity is available in the Portable Document Format (PDF)versionoftheusermanualat www.philips.com/support.

Recycling

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC:

Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health.

8EN

Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separateintothreematerials:cardboard(box), polystyrenefoam(buffer)andpolyethylene (bags,protectivefoamsheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations is under license. 2013 Gibson Innovations Limited. All rights reserved. Specificationsaresubjecttochangewithout notice. Gibson reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.

2016 Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are register

Manualsnet FAQs

If you want to find out how the AEA2000/12 Philips works, you can view and download the Philips AEA2000/12 AEA2000 Adapter User Manual on the Manualsnet website.

Yes, we have the User Manual for Philips AEA2000/12 as well as other Philips manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Philips AEA2000/12. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Philips AEA2000/12 AEA2000 Adapter User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Philips AEA2000/12 AEA2000 Adapter User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Philips AEA2000/12 AEA2000 Adapter User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Philips AEA2000/12 AEA2000 Adapter User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Philips AEA2000/12 AEA2000 Adapter User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.