Contents

Pelco Sarix IBP3-PLMT C2273M Adapter Safety Instructions PDF

Download download
Pelco Sarix IBP3-PLMT C2273M Adapter Safety Instructions PDF
Pelco Manual Pelco Adapter Manual Pelco Sarix IBP3-PLMT Manual Pelco C2273M Manual Pelco Adapter Safety Instructions
Pages 3
Year 2021
Language(s)
English en
1 of 3
1 of 3

Summary of Content for Pelco Sarix IBP3-PLMT C2273M Adapter Safety Instructions PDF

Page 1

INSTALLATION MANUAL C2273M | 5/21

www.pelco.com

SARIX IBP3-PLMT POLE MOUNT ADAPTER

Important Safety Instructions 1. Read these instructions.

2. Keep these instructions.

3. Follow these instructions.

4. Installation should be done by qualified personnel and conform to all local codes.

5. Use only installation methods and materials capable of supporting four times the maximum specified load.

6. Use stainless steel hardware to fasten the mount to outdoor surfaces.

Description The IBP3-PLMT pole mount adapter is engineered for use with all Sarix IBP Series Environmental Bullet Cameras. It can be installed on a horizontal/vertical pipe or pole that has a diameter of 7.62 cm (3 in.) to 20.32 cm (8 in.).

Parts List The following parts are supplied.

The following parts are required but not supplied.

Installing the IBP3-PLMT Indoors Without a Surface Mount Back Box The IBP Series camera mounts directly on the pole mount adapter using five Torx 8-32 x 0.75, T20 tamperproof screws (supplied). Camera and network cable connections are managed behind the adapter.

Figure 1. Indoor Installation Without a Surface Mount Back Box

Qty Description 1 IBP3-PLMT pole mount adapter 2 Stainless steel straps 4 Torx 8-32 x 0.375, T20 screws 6 Torx M4 x 14 mm, T20 tamperproof screws 5 Torx 8-32 x 0.75, T20 screws

Qty Description 1 Sarix IBP Series Environmental Bullet Camera 1 Torx T20 bit driver, tamperproof 1 Surface mount back box with adapter plate, Part no. IBP3BBAP-ES

Page 2

2 C2273M (5/21)

Installing the IBP3-PLMT Indoors/Outdoors With a Surface Mount Back Box An adapter plate and surface mount back box are installed on the pole mount adapter as shown in Figure 2. The Sarix IBP Series Environmental Bullet Camera mounts on the back box lid and is attached to the back box. The camera cable connections are made and contained inside the back box.

Figure 2. Indoor/Outdoor Installation with IBP3BBAP-ES Surface Mount Back Box

1. Attach the IBP3BBAP-ES surface mount back box adapter plate to the IBP3-PLMT pole mount adapter using four 8-32 x 0.375 screws (supplied).

2. Place the IBP3BBAP-ES surface mount back box on the adapter plate standoffs, and then secure with the three screws supplied with the back box.

3. Thread the two stainless steel straps (supplied) through the slots in the back of the adapter, and then attach this assembly to the pole or pipe. WARNING: Only mount one camera system per set of stainless steel straps. Installation Torque: 35-45in.lbs.

Figure 3. Attach Assembly to the Pole

4. Route the network cable into the back of the surface mount back box.

5. Align the red dot inside the back box lid with the red dot on the surface mount back box (see arrows in Figure 2). Then mark the top screw of the lid to be able to orient the top of the camera with the top of the lid.

6. Feed the camera cable through the center hole in the IBP3BBAP-ES surface mount back box lid.

7. Align the camera top with the top screw of the lid, and then attach the camera to the lid using the six M4 x 14 mm, T20 tamperproof screws (supplied).

8. Connect the camera cable to the network cable and arrange the cables inside the back box.

9. Align the red dots on the lid and back box, and then attach the surface mount back box lid/camera to the back box using the three captive lid screws.

6, 7

8, 9 3, 4

1

2

5

Page 3

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc. or its affiliates. Copyright 2021, Pelco, Inc. ONVIF and the ONVIF logo are trademarks of ONVIF Inc. All other product names and services are the property of their respective companies. All rights reserved. Product specifications and availability are subject to change without notice.

Pelco, Inc. 625 W. Alluvial Fresno, California 93711 USA (800) 289-9100 Tel (800) 289-9150 Fax +1 (559) 292-1981 Inter

Manualsnet FAQs

If you want to find out how the Sarix IBP3-PLMT Pelco works, you can view and download the Pelco Sarix IBP3-PLMT C2273M Adapter Safety Instructions on the Manualsnet website.

Yes, we have the Safety Instructions for Pelco Sarix IBP3-PLMT as well as other Pelco manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Safety Instructions should include all the details that are needed to use a Pelco Sarix IBP3-PLMT. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Pelco Sarix IBP3-PLMT C2273M Adapter Safety Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Pelco Sarix IBP3-PLMT C2273M Adapter Safety Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Pelco Sarix IBP3-PLMT C2273M Adapter Safety Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Pelco Sarix IBP3-PLMT C2273M Adapter Safety Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Pelco Sarix IBP3-PLMT C2273M Adapter Safety Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.