Contents

Pelco C2232M-C Adapter Installation Manual PDF

1 of 4
1 of 4

Summary of Content for Pelco C2232M-C Adapter Installation Manual PDF

C2232M-C (5/08) PMCL-VA Monitor Ceiling Mount Adapter

Important Safety Instructions 1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Installation should be done only by qualified personnel and conform to all local codes.

6. Only use replacement parts recommended by Pelco.

7. This unit is designed for indoor use only, and it must not be installed where exposed to rain or moisture.

Description The PMCL-VA monitor mount adapter allows a Pelco PMCL-CM or PMCL-CMP ceiling mount to be used with certain Pelco PMCL500 Series flat panel LCD monitors. The adapter makes the ceiling mount VESA FDMI-compliant. The adapter is required for the following Pelco monitors if they are ceiling mounted:

PMCL537 37-inch flat panel LCD monitor PMCL542 42-inch flat panel LCD monitor

Installation The following parts are supplied:

Qty Description 1 Adapter plate 4 M6 x 12mm machine screws 4 Flat washers 6 M8 x 30mm machine screws 6 Flat washers 6 Split washers

NOTE: It is recommended that at least two people be present when mounting the monitor. One person (or more) should hold the monitor, while a second (or third) person installs the screws to secure the monitor to the adapter plate.

INSTALLING THE CEILING MOUNT Refer to the appropriate Pelco mount manual for details on installing the PMCL-CM (non-telescoping) ceiling mount, or installing and adjusting the PMCP-CMP (telescoping) ceiling mount. Do the following:

1. Attach the mount to the ceiling.

2. Adjust the length of the telescoping pole (PMCL-CMP only).

3. Adjust the lower section of the mount to the desired direction.

C2232M-C (5/08) 1

ATTACHING THE ADAPTER PLATE Refer to Figure 1. To attach the PMCL-VA to the ceiling mount, do the following:

1. Position the adapter plate so the recessed square in the middle fits over the mounting head of the ceiling mount.

2. Use the four flat washers and four M6 x 12mm screws (supplied with the PMCL-VA adapter) to secure the adapter plate to the monitor mount.

Figure 1. Attaching the PMCL-VA Adapter to the Ceiling Mount

ATTACHING THE MONITOR NOTE: It is recommended that at least two people be present when mounting the monitor. One person (or more) should hold the monitor while a second (or third) person installs the screws to secure the monitor to the adapter plate. A lift, if available, can be used to help support the monitors weight.

1. Hold the monitor level with the adapter plate.

2. Refer to Figure 2. Align the holes on the sides of the adapter plate with the holes on the back of the monitor. Install the six flat washers (first), the six split washers, and then the six M8 x 30mm screws (supplied with the PMCL-VA adapter) to secure the monitor to the adapter plate.

Figure 2. Attaching the Monitor to the Adapter Plate

2 C2232M-C (5/08)

CONNECTING POWER AND ADJUSTING TILT/SWIVEL Refer to the appropriate Pelco mount manual for details. Do the following:

1. Position the power and video wires.

2. Tilt the monitor to the desired angle.

3. If desired, swivel the monitor between portrait and landscape view.

Specifications GENERAL

Suggested Mounting Method Secure to ceiling mount using M6 x 12mm machine screws (provided), and to monitor using M8 x 30mm machine screws

(provided)

Construction Steel

Finish Black powder coat

Dimensions Refer to Figure 3

Unit Weight 9.20 lb (4.17 kg)

Shipping Weight 11 lb (4.98 kg)

Figure 3. PMCL-VA Dimension Drawing

26.62 (67.61)

12 (3

0. 48

) (2

.0 6)

0. 81

NOTE: VALUES IN PARENTHESIS ARE CENTIMETERS; ALL OTHERS ARE INCHES

C2232M-C (5/08) 3

The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.

PRODUCT WARRANTY AND RETURN INFORMATION

WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.

Exceptions to this warranty are as noted below:

Five years on fiber optic products and TW3000 Series unshielded twisted pair (UTP) transmission products.

Three years on Spectra IV products. Three years on Genex Series products (multiplexers, server, and keyboard). Three years on DX Series digital video recorders, DVR5100 Series digital video

recorders, DigitalSENTRY Series hardware products, DVX Series digital video recorders, NVR300 Series network video recorders, and Endura Series distributed network-based video products.

Three years on Camclosure and Pelco-branded fixed camera models, except the CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models, which have a five-year warranty.

Three years on PMCL200/300/400 Series LCD monitors. Two years on standard motorized or fixed focal length lenses. Two years on Legacy, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8

Series fixed dome products. Two years on Spectra III, Spectra Mini, Esprit, ExSite, and PS20 scanners,

including when used in continuous motion applications. Two years on Esprit and WW5700 Series window wiper (excluding wiper

blades). Two years (except lamp and color wheel) on Digital Light Processing (DLP)

displays. The lamp and color wheel will be covered for a period of 90 days. The air filter is not covered under warranty.

Two years on Intelli-M eIDC controllers. One year (except video heads) on video cassette recorders (VCRs). Video heads

will be covered for a period of six months. Six months on all pan and tilts, scanners, or preset lenses used in continuous

motion applications (preset scan, tour, and auto scan modes). Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid to a Pelco designated location. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty.

Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelcos liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.

The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state to state.

If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following information:

1. Model and serial number 2. Date of shipment, P.O. number, sales order number, or Pelco invoice number 3. Details of the defect or problem

If there is a dispute regarding the warranty of a product that does not fall under the warranty conditions stated above, please include a written explanation with the product when returned.

Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.

RETURNS To expedite parts returned for repair or credit, please call Pelco at (800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for credit, and RA number if returned for repair) and designated return location.

All merchandise returned for credit may be subject to a 20 percent restocking and refurbishing charge.

Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid.

REVISION HISTORY Manual # Date Comments C2232M 2/07 Original version. C2232M-A 6/07 Revised manual to document inclusion of 6 screws for mounting the plate to the monitor. Also, removed drawing and revised instructions about

using screws from the back of the monitor. C2232M-B 7/07 Revised manual to document inclusion of 10 flat washers and 6 split washers. Figures 1, 2, and 3 were revised to show the reverse side of the

adapter plate, plus the additional washers. C2232M-C 5/08 Revised manual to document new hardware; replaced M8 x 16mm screws with M8 x 30mm screws per CN21120.

Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, ExSite, Endura, and Spectra are registered trademarks of Pelco, Inc. Copyright 2008, Pelco, Inc. All rights reserved. DLP is a registered trademark of Texas Instruments, Inc. FDMI is a trademark of the Video Electronics Standards Association. VESA is a registered trademark of the Video Electronics Standards Association.

Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA www.pelco.com USA & Canada Tel: 800/289-9100 Fax: 800/289-9150

International Tel: 1-559/292-1981 Fax: 1-

Manualsnet FAQs

If you want to find out how the C2232M-C Pelco works, you can view and download the Pelco C2232M-C Adapter Installation Manual on the Manualsnet website.

Yes, we have the Installation Manual for Pelco C2232M-C as well as other Pelco manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Manual should include all the details that are needed to use a Pelco C2232M-C. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Pelco C2232M-C Adapter Installation Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Pelco C2232M-C Adapter Installation Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Pelco C2232M-C Adapter Installation Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Pelco C2232M-C Adapter Installation Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Pelco C2232M-C Adapter Installation Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.