Panasonic UT-VPF Series Operating Instructions PDF

1 of 2
1 of 2

Summary of Content for Panasonic UT-VPF Series Operating Instructions PDF

(ENGLISH) OPERATING INSTRUCTIONS

Printed in Japan Panasonic Corporation 2014

DFQX5834YAK PB1014-0

Panasonic Corporation Osaka, Japan

Panasonic System Communications Company of North America Two Riverfront Plaza, Newark NJ 07102

Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3

Importers name & address pursuant to the EU legislation Panasonic System Communications Company Europe, Panasonic Marketing Europe GmbH Hagenauer Strae 43 65203 Wiesbaden Germany

IT 570-0021 10 12 Web Site : http://panasonic.net/

Protective Film / Schutzfolie / Pellicule de protection / Model No. UT-VPF series

(DEUTSCH) BEDIENUNGSANLEITUNG

Thank you for purchasing this Panasonic Product. Applying this Film to the face of any screen will protect the screen from dirt and abrasions. This protective film is a disposable item.

Accessories OPERATING INSTRUCTIONS (This book) 1 Spatula 1 Fixing tape (to use when applying) 3

How to apply the Protective Film

Protective Film

Peel-off sheet Silicon emulsion side

White tape

Do not bend the Protective Film. Creases may prevent the Film from being applied smoothly to the touchscreen, and may make the screen difficult to see.

CAUTION

1 Use the Soft Cloth provided with your computer to remove dirt, dust, fingerprints, etc., from the screen surface. If the Protective Film is applied while foreign matter remains on the screen surface, air bubbles or abrasions may result.

2 Without removing the peel-off sheet, align the position of the Protective Film. Put the Protective Film with the white tape to the upper side of the screen and with the peel-off sheet side down. Then, align each corner of the Protective Film about 0.7 mm inside from the edges of the screen. Use the fixing tapes provided to fix the short side of the Protective Film that has the white tape.

approx. 0.7 mm approx. 0.7 mm

Fixing tapes

White tape

3 Before removing the peel-off sheet, lift the Protective Film and wipe away dirt or dust again from the screen surface.

4 Hold the white tape segment and remove the peel-off sheet a little. Release the peel-off sheet little by little, and apply the Protective Film to the screen slowly to prevent air bubbles from entering. At this time, do not touch the exposed part of the Protective Film, or leave the Film lying around, as dust or other foreign matter might settle on it. If the Film is positioned incorrectly, or if large air bubbles are visible, peel off the Film and re-apply. If dust or other foreign matter should settle on the silicon emulsion side of the Protective Film, remove it with cellophane tape.

5 In case air bubbles are visible, remove them with the spatula provided. Remove air bubbles by pushing them toward the outer edge of the screen, as shown in the figure. Do not apply too much force, as damage to the screen may result. Also, be careful not to scratch the surface of the Protective Film with the corner of the spatula.

6 Remove the fixing tapes and finish applying the Protective Film.

Spatula

When removing the Protective Film, be careful not to scratch the screen with your fingernails, etc. Peel off the Protective Film slowly and carefully. If the surface of the Protective Film becomes dirty, wipe it with the soft cloth provided with your computer. Wiping with other materials may cause deterioration in the quality of the Protective Film.

Even after the Protective Film has been applied, be sure to use only your fingertip or the specialized stylus/digitizer pen to operate the touchscreen or the digitizer. Using objects other than the specialized stylus/digitizer pen may cause deterioration in the quality of the Protective Film.

CAUTION

Vielen Dank, dass Sie sich fr ein Produkt von Panasonic entschieden haben. Indem Sie diese Folie auf die Oberflche eines beliebigen Bildschirms auftragen, wird der Bildschirm vor Schutz und Abnutzung geschtzt. Bei dieser Schutzfolie handelt es sich um einen Einwegartikel.

Zubehr BEDIENUNGSANLEITUNG (dieses Handbuch) 1 Spachtel 1 Fixierband (beim Anbringen verwenden) 3

Anbringen der Schutzfolie

Schutzfolie

Deckfolie Siliziumschichtseite

Wei band

Die Schutzfolie darf nicht verbogen oder geknickt werden. Falls die Schutzfolie Falten aufweist, kann sie u.U. nicht plan liegend am Touchscreen befestigt werden, wodurch die Betrachtung des Bildschirms erschwert wird.

VORSICHT

1 Verwenden Sie das weiche Tuch, das mit dem Computer mitgeliefert wurde, um Schmutz, Staub, Fingerabdrcke usw. von der Bildschirmoberflche zu entfernen. Falls Sie die Schutzfolie auftragen, whrend sich Fremdkrper auf der Bildschirmoberflche befinden, knnen sich Luftblasen und Abreibungen bilden.

2 Richten Sie die Position der Schutzfolie aus, ohne die Deckfolie abzunehmen. Setzen Sie die Schutzfolie mit dem weien Band zum oberen Bildschirmrand und mit der Deckfolie nach unten weisend auf die Oberseite des Bildschirms. Richten Sie dann jede Ecke der Schutzfolie ca. 0,7 mm innerhalb der Rnder des Bildschirms aus. Verwenden Sie die mitgelieferten Fixierbnder, um die kurze Seite der Schutzfolie, die das weie Band trgt, zu fixieren.

Ca. 0,7 mm Ca. 0,7 mm

Fixierbnder

Wei band

3 Vor dem Abnehmen der Deckfolie heben Sie die Schutzfolie an und wischen Sie Schmutz oder Staub erneut von der Oberflche des Bildschirms ab.

4 Halten Sie das Segment des weien Bandes und ziehen Sie die Deckfolie ein wenig ab. Geben Sie die Deckfolie Stck fr Stck frei und bringen Sie die Schutzfolie langsam auf den Bildschirm auf, um zu verhindern, dass Luftblschen eindringen. Berhren Sie nicht den freiliegenden Teil der Schutzfolie bzw. lassen Sie die Folie nicht herumliegen, da sich Staub und andere Fremdkrper darauf absetzen knnten. Falls die Folie nicht einwandfrei auf dem Touchscreen positioniert ist oder groe Luftblschen sichtbar sind, ziehen Sie die Folie wieder ab und befestigen Sie sie dann erneut mit der korrekten Ausrichtung. Falls sich Staub und andere Fremdkrper auf der Siliziumschichtseite der Schutzfolie absetzen, entfernen Sie diese Fremdkrper mit Cellophanpapier.

5 Falls Luftblschen sichtbar sind, entfernen Sie diese mit dem mitgelieferten Spachtel. Zum Entfernen von Luftblschen schieben Sie diese wie in der Abbildung gezeigt mit dem Spachtel auf den Bildschirmrand hin. Drcken Sie nicht zu stark auf die Folie, da anderenfalls der Bildschirm beschdigt werden kann. Achten Sie auerdem darauf, die Schutzfolienoberflche nicht mit der Ecke des Spachtels zu zerkratzen.

6 Entfernen Sie die Fixierbnder und beenden Sie das Anbringen der Schutzfolie.

Spachtel

Achten Sie beim Entfernen der Schutzfolie darauf, den Bildschirm nicht mit den Fingerngeln usw. zu zerkratzen. Ziehen Sie die Schutzfolie langsam und vorsichtig ab. Wenn die Oberflche der Schutzfolie verschmutzt wird, wischen Sie sie mit dem weichen, mit dem Computer mitgelieferten Tuch ab. Durch Abwischen mit anderen Materialien kann die Qualitt der Schutzfolie beeintrchtigt werden.

Selbst nachdem Sie die Schutzfolie aufgetragen haben, verwenden Sie immer nur die Fingerspitze bzw. den speziellen Stift/Digitalstift, um den Sensorbildschirm des Digitalumsetzers zu bedienen. Bei Verwendung anderer Gegenstnde als den Stift/Digitalstift kann die Qualitt der Schutzfolie beeintrchtigt werden.

VORSICHT

(FRANAIS) INSTRUCTIONS DUTILISATION

( )

1 1

1

2 0.7 mm

0.7 mm 0.7 mm

Model No. / Modell Nr. / Modle No. /

Dimensions (W H) / bmessungen (B H) / Dimensions physiques (L H) / ()

Type / Typ / Type / LCD

UT-VPF series 462.5 mm 321.5 mm {18.212.7} 20

Speci cations / Technische Daten / Spci cations /

3

4

5

6

Nous vous remercions davoir achet ce produit Panasonic. Lapplication de cette pellicule sur la surface dun cran le protgera contre les salets et labrasion. Cette pellicule de protection est un produit jetable.

Accessoires INSTRUCTIONS DUTILISATION (ce manuel) 1 Spatule 1 Bande de fixation ( utiliser le cas chant) 3

Comment appliquer la pellicule de protection

Pellicule de protection

Feuille dtachable Face mulsion de silicone

Ruban blanc

vitez de plier la pellicule de protection. Les plis risqueraient dempcher lapplication uniforme de la pellicule sur lcran tactile, et de rduire la visibilit de lcran.

ATTENTION

1 Utilisez le chiffon doux fourni avec lordinateur conu cet effet pour retirer de la surface de lcran la poussire, les empreintes digitales, etc. Si la pellicule de protection est applique sur lcran alors que la surface de ce dernier comporte encore des corps trangers, il risque de sy former des bulles dair et lcran risque dtre sujet labrasion.

2 Sans retirer la feuille dtachable, alignez la position de la pellicule de protection. Placez la pellicule de protection de faon ce que le ruban blanc soit vers le haut de lcran et la feuille dtachable vers le bas. Puis alignez chaque coin de la pellicule de protection denviron 0,7 mm lintrieur des cts de lcran. Utilisez les bandes de fixation fournies pour fixer le ct court de la pellicule de protection qui porte le ruban blanc.

Env. 0,7 mm Env. 0,7 mm

Bandes de fixation

Ruban blanc

3 Avant de retirer la feuille dtachable, soulevez la pellicule de protection et essuyez nouveau la salet ou la poussire de la surface de lcran.

4 Maintenez le bout de ruban blanc et retirez lgrement la feuille dtachable. Retirez la feuille dtachable progressivement et placez la pellicule de protection doucement sur lcran pour viter la formation de bulles dair. Vous devez alors prendre garde de ne pas toucher la partie expose de la pellicule de protection ou de laisser la pellicule traner, pour viter que des poussires ou autres corps trangers ne sy dposent. Si la pellicule nest pas bien place ou si de grandes bulles dair sont visibles, retirez la pellicule et appliquez-la nouveau. Si des poussires ou autres corps trangers se dposent sur la face mulsion de silicone de la pellicule de protection, retirez-les avec un bout de ruban de cellophane.

5 Si des bulles dair sont visibles, enlevez- les laide de la spatule fournie. Retirez les bulles dair en les poussant vers le bord extrieur de lcran, tel quillustr sur la photographie. vitez dappliquer une trop forte pression, pour ne pas endommager lcran. Prenez galement garde de ne pas gratigner la surface de la pellicule de protection avec les bords de la spatule.

6 Retirez les bandes de fixation et terminez de placer la pellicule de protection.

Spatule

Lorsque vous retirez la pellicule de protection, prenez garde dgratigner lcran avec les ongles, etc. Retirez la pellicule de protection lentement et soigneusement. Si la surface de la pellicule de protection devient sale, nettoyez-la avec le tissu doux fourni avec votre ordinateur. Le nettoyage avec dautres matires peut abimer la qualit de la pellicule de protection.

Mme une fois la pellicule de protection pose, vous devez utiliser uniquement le doigt ou le stylet/stylet numriseur conu cet effet pour utiliser lcran tactile ou le numriseur. Le fait dutiliser un autre objet que le stylet/stylet numriseur spcial risquerait de causer la dtrioration de

Manualsnet FAQs

If you want to find out how the UT-VPF Series Panasonic works, you can view and download the Panasonic UT-VPF Series Operating Instructions on the Manualsnet website.

Yes, we have the Operating Instructions for Panasonic UT-VPF Series as well as other Panasonic manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operating Instructions should include all the details that are needed to use a Panasonic UT-VPF Series. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Panasonic UT-VPF Series Operating Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Panasonic UT-VPF Series Operating Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Panasonic UT-VPF Series Operating Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Panasonic UT-VPF Series Operating Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Panasonic UT-VPF Series Operating Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.