Onkyo VC-GX30B Owner's Manual PDF

1 of 2
1 of 2

Summary of Content for Onkyo VC-GX30B Owner's Manual PDF

SMART SPEAKER G3

VC-GX30

Part Names Front

1. Play/pause (1/;) button: Used for play operations in the Music app, etc.

2. BLUETOOTH ( ) button: Used for pairing and connecting with BLUETOOTH wireless technology enabled devices. Refer to "BLUETOOTH Playback" for pairing and connection instructions.

3. Microphone mute ( ) button: Turn on or off microphone mute. The LED indicators light as follows each time microphone mute is turned on or off.

: Microphone mute on : Microphone mute off

Factory Reset: Also press and hold the microphone mute button for 10 seconds to initialize the settings of this unit. 0 The Google Assistant will not respond when you call it while

microphone mute is on. 4. Microphone: Used when talking to the Google Assistant. 5. Volume (i/j) buttons: Allows you to adjust the volume. You can

adjust the volume between 0 and 50. When you press the volume buttons, the LED indicators light according to the volume level for 3 seconds as follows.

: 0 : 1 to 9 : 10 to 19 : 20 to 29 : 30 to 39 : 40 to 49 : 50

0 The brightness of the white LEDs let you check the volume at each single level. The LEDs become brighter when you increase the volume and get dimmer as you reduce the volume.

6. LED indicators: The status of this unit is indicated by the colors and illumination status of the LEDs.

Back

7. Micro USB port: This is not available for use. It is only used when the unit is being serviced.

8. AC IN terminal: Connect the supplied power cord.

Connect & Initial Setup Power Cord Hookup This unit includes a removable power cord. Connect the power cord to AC IN of the unit and then connect to the outlet. Always disconnect the outlet side first when disconnecting the power cord.

Download the Google Home app Use the Google Home app to setup the unit and operate it. Download the Google Home app from Google Play or the App Store to your smartphone or tablet. 0 Google Home app can be used on the following operating systems.

(As of September 2017) AndroidTM: Android 4.2 or later iOS: iOS 8.0 or later (supported on iPhone, iPad, and iPod touch)

The smartphone or tablet needs to be connected to the same network as this unit to setup and operate the unit. Check network connection beforehand.

Initial Setup Perform the following procedure when the unit is on. 1. Start the Google Home app.

When you tap "ACCEPT" for the terms of service and privacy policy, the network connection between this unit and the smartphone is initiated. Follow the on-screen instructions to complete the initial settings.

2. You can select a tutorial which lets you practice using your Google Assistant once initial settings are complete. Refer to "Meet your Google Assistant" for information on your Google Assistant.

Note: Your device may download and apply an Over-the-Air software update during installation. This is normal. Please be patient while your device is updated to enjoy the latest Google Chromecast built-in and Google Assistant features.

Initialize Initialize the settings of the unit to return the settings to the status at the time of purchase. Press and hold the microphone mute button for 10 seconds to initialize the unit. The LED indicators flash as follows when initializing is started.

It takes about 20 seconds to initialize. The LED indicators turn off when initializing is finished, and the settings return to the default settings.

Meet your Google Assistant You can call up the Google Assistant by saying "Ok Google" at the unit. The LED indicators flash white when the Google Assistant has started and ready to receive questions.

Hotword Detected: When the device mics are not muted and it recognizes the hotword "Ok Google" or "Hey Google," the four (middle) Google Assistant LEDs light up in left-to-right order to confirm hotword detection and await your voice command.

Listening: After the hotword has been detected and the Assistant is awaiting the user query, all four (middle) Google Assistant LEDs slowly pulse.

Thinking: While a voice command is processing, the four (middle) Google Assistant LEDs slowly blink from left-to-right, one at a time.

Responding: As the Google Assistant responds to the user's voice command, all four (middle) Google Assistant LEDs blink on and off.

0 The LED indicators light orange when microphone mute is on, and there will be no response from your Google Assistant even if you call it.

Questions For The Google Assistant

How are you?

Stop

Turn it up

Volume level 6

What can you do?

Play some Music

Play dance music on Youtube

Pause

Next Song

Set a timer 15 minutes

How many teaspoons in a cup?

When's my first event tomorrow?

Wake me up at 6 am tomorrow

Tell me about my day

What's the weather today?

What's the latest news?

How do you I say hello in Spanish?

How many calories in an apple?

What sound does a cow make?

What is the nearest pharmacy?

When do they close?

What is their phone number?

Play some music on AV Receiver

Pause the Living Room Speaker

Play sneezing panda video on TV

Set the thermostat 72 degrees

Turn on the living room light

Dim the light in the kitchen

Turn off the bed room light

1

4

5

6 2 3

7 8

1 2

Wi-Fi

1 2 Hi, how can I help?

SN29403348_VC-GX30_En_Full_171102.fm 2

* 2 9 4 0 3 3 4 8 *

F1711-0SN29403348

BLUETOOTH Playback Pairing Pairing is necessary when connecting the BLUETOOTH enabled devices for the first time. Perform the following procedure when the unit is on. 1. Press and hold the BLUETOOTH button on this unit for 3 seconds.

The LED indicators flash as follows when pairing is started.

2. Enable (turn on) the BLUETOOTH function of the BLUETOOTH wireless technology enabled device, then select this unit from amongst the devices displayed. This unit is displayed as " VC- GX30**** ".

3. All six LEDs blink on and off when pairing is finished.

Pairing has failed if all six LEDs does not blink on and off. Retry from step 1.

0 Do steps 1 to 3 to connect another BLUETOOTH wireless technology enabled device. 0 The coverage area is within about 10 m. Note that connection is not

always guaranteed with all BLUETOOTH wireless technology enabled devices.

Playing Back Perform the following procedure when the unit is on. 1. Perform the connection procedure on the BLUETOOTH wireless

technology enabled device. 0 You can also press the BLUETOOTH button on this unit to

connect the BLUETOOTH wireless technology enabled device that was last connected. Note that this may not work with some BLUETOOTH wireless technology enabled devices.

2. Play the music files. Increase the volume of the BLUETOOTH wireless technology enabled device to an appropriate level. 0 Due to the characteristics of BLUETOOTH wireless technology, the

sound produced on this unit may slightly be behind the sound played on the BLUETOOTH wireless technology enabled device.

Specifications Analog Audio Output RMS Output Power

40 W (4 ohm at 1 kHz THD10%), 10 W (8 ohm at 10 kHz THD10%)

Network Section Wireless LAN

IEEE802.11 a/b/g/n/ac standard 5 GHz/2.4 GHz band EU: 1-13ch, 36-48ch, 52-64ch, 100-140ch JP: 1-14ch, 36-48ch, 52-64ch, 100-140ch US: 1-11ch, 36-48ch, 52-64ch, 100-140ch, 149-165ch

Bluetooth Section Communication system

BLUETOOTH Specification version 4.2 Frequency band

2.4 GHz (2.402 GHz - 2.480 GHz) Modulation method

FHSS (Freq Hopping Spread Spectrum) Compatible Bluetooth profiles

A2DP: 1.31 AVRCP: 1.6

Supported Codecs SBC AAC

Transmission range (A2DP) 20 Hz - 20 kHz (Sampling frequency 44.1/48 kHz)

Maximum communication range Line of sight approx. 10 m *

* The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc.

General Power Supply

AC 100 - 240 V, 50 / 60 Hz Power Consumption

26 W VC-GX30 complies with European Commission Regulation (EC) No 1275/2008 as a networked equipment with high network availability (HiNA equipment and equipment with HiNA functionality). Power consumption

In Standby : N/A In Network Standby : N/A Operation Standby* : 2.7 W

* Operation Standby : VC-GX30 is connected to a wireless network but does not provide active audio functions.

Speaker Type Closed box type

Speaker Configuration Tweeter: 20 mm a 1 Soft Dome Woofer: 80 mm a 1 Cone

Dimensions (W a H a D) 120 mm a 168 mm a 128 mm 4-5/7" a 6-3/5" a 5"

Weight 1.8 kg (4.0 lbs.)

Accessary AC Power cord (1) Quick Start Guide (1) Meet your Google Assistant (European models) (3) Meet your Google Assistant (North American models) (2)

Specifications and appearance are subject to change without notice. We will not accept responsibility for damage arising from the connection of equipment manufactured by other companies.

License and Trademark

VC-GX30XXXX

The BLUETOOTH word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.

Google, Google Home, Google Play, Chromecast built-in and other related marks and logos are trademarks of Google Inc.

The Google Assistant requires an internet connection and is not available in all countries or languages. Availability and performance of certain features, services and applications are device and network dependent and may not be available in all areas; subscription(s) may be required and additional terms, conditions and/or changes may apply.

All other trademarks are the property of their respective owners. / Toutes les autres marques commerciales sont la proprit de leurs dtenteurs respectifs. / El resto de marcas comerciales son propiedad de sus respectivos propietarios. / Tutti gli altri marchi di fabbrica sono di propriet dei rispettivi proprietari. / Alle anderen Warenzeichen sind das Eigentum ihrer jeweiligen Eigentmer. / Alle andere handelsmerken zijn eigendom van de desbetreffende rechthebbenden. / Al

Manualsnet FAQs

If you want to find out how the VC-GX30B Onkyo works, you can view and download the Onkyo VC-GX30B Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Onkyo VC-GX30B as well as other Onkyo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Onkyo VC-GX30B. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Onkyo VC-GX30B Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Onkyo VC-GX30B Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Onkyo VC-GX30B Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Onkyo VC-GX30B Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Onkyo VC-GX30B Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.