Onkyo CR 515, CR 315 Instruction Manual PDF
en
Summary of Content for Onkyo CR 515, CR 315 Instruction Manual PDF
CD Receiver
CR-515 CR-315 Instruction Manual
Thank you for purchasing an Onkyo CD Receiver. Please read this manual thoroughly before making any connections and plugging it in. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new CD Receiver. Please retain this manual for future reference.
Contents
Getting Started .......................... 2
Connections ............................ 16
Basic Operation ...................... 27
Playing a Disc.......................... 30
Listening to the Radio ........... 39
Clock and Timer ...................... 47
Miscellaneous ......................... 54 Troubleshooting................................ 54 If you cant resolve an issue, try reset- ting the CD receiver by holding down the [ ] button and pressing the [STANDBY/ON] button.
En
2
Important Safety Instructions
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in
accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radia-
tors, heat registers, stoves, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are pro- vided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience recepta- cles, and the point where they exit from the appara- tus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table spec- ied by the manufacturer, or sold with the apparatus. When a cart is used, use cau- tion when moving the cart/ apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Damage Requiring Service Unplug the apparatus from the wall outlet and refer servicing to qualied service personnel under the following conditions: A. When the power-supply cord or plug is damaged, B. If liquid has been spilled, or objects have fallen
into the apparatus, C. If the apparatus has been exposed to rain or
water, D. If the apparatus does not operate normally by
following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualied technician to restore the apparatus to its normal operation,
E. If the apparatus has been dropped or damaged in any way, and
F. When the apparatus exhibits a distinct change in performance this indicates a need for service.
16. Object and Liquid Entry Never push objects of any kind into the apparatus through openings as they may touch dangerous volt- age points or short-out parts that could result in a re or electric shock. The apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases shall be placed on the apparatus. Dont put candles or other burning objects on top of this unit.
17. Batteries Always consider the environmental issues and fol- low local regulations when disposing of batteries.
18. If you install the apparatus in a built-in installation, such as a bookcase or rack, ensure that there is ade- quate ventilation. Leave 20 cm (8") of free space at the top and sides and 10 cm (4") at the rear. The rear edge of the shelf or board above the apparatus shall be set 10 cm (4") away from the rear panel or wall, creating a ue-like gap for warm air to escape.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING RISK OF ELECTRIC SHOCK
DO NOT OPEN RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
AVIS
PORTABLE CART WARNING
S3125A
Precautions 1. Recording CopyrightUnless its for personal use
only, recording copyrighted material is illegal with- out the permission of the copyright holder.
2. AC FuseThe AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer.
3. CareOccasionally you should dust the unit all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the unit immediately afterwards with a clean cloth. Dont use abrasive cloths, thinners, alco- hol, or other chemical solvents, because they may damage the nish or remove the panel lettering.
4. Power WARNING BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SEC- TION CAREFULLY. AC outlet voltages vary from country to country. Make sure that the voltage in your area meets the voltage requirements printed on the units rear panel (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).
The power cord plug is used to disconnect this unit from the AC power source. Make sure that the plug is readily operable (easily accessible) at all times.
Pressing the [STANDBY/ON] button to select Standby mode does not fully shutdown the unit. If you do not intend to use the unit for an extended period, remove the power cord from the AC outlet.
5. Never Touch this Unit with Wet HandsNever handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer.
6. Handling Notes If you need to transport this unit, use the original
packaging to pack it how it was when you origi- nally bought it.
Do not leave rubber or plastic items on this unit for a long time, because they may leave marks on the case.
This units top and rear panels may get warm after prolonged use. This is normal.
If you do not use this unit for a long time, it may not work properly the next time you turn it on, so be sure to use it occasionally.
When youve nished using this unit, remove all discs and turn off the power.
7. Installing this Unit Install this unit in a well-ventilated location. Ensure that theres adequate ventilation all
around this unit, especially if its installed in an audio rack. If the ventilation is inadequate, the unit may overheat, leading to malfunction.
Do not expose this unit to direct sunlight or heat sources, because its internal temperature may rise, shortening the life of the optical pickup.
Avoid damp and dusty places, and places subject to vibrations from loudspeakers. Never put the unit on top of, or directly above a loudspeaker.
Install this unit horizontally. Never use it on its side or on a sloping surface, because it may cause a malfunction.
If you install this unit near a TV, radio, or VCR, the picture and sound quality may be affected. If this occurs, move this unit away from the TV, radio, or VCR.
8. To Obtain a Clear PictureThis unit is a high- tech, precision device. If the lens on the optical pickup, or the disc drive mechanism becomes dirty or worn, the picture quality may be affected. To maintain the best picture quality, we recommend regular inspection and maintenance (cleaning or worn part replacement) every 1,000 hours of use depending on the operating environment. Contact your Onkyo dealer for details.
9. Moisture Condensation Moisture condensation may damage this unit. Read the following carefully: Moisture may condense on the lens of the optical pickup, one of the most important parts inside this unit. Moisture condensation can occur in the following
situations: The unit is moved from a cold place to a warm
place. A heater is turned on, or cold air from an air
conditioner is hitting the unit. In the summer, when this unit is moved from an
air conditioned room to a hot and humid place. The unit is used in a humid place.
Do not use this unit when theres the possibility of moisture condensation occurring. Doing so may damage your discs and certain parts inside this unit.
If condensation does occur, remove all discs and leave this unit turned on for two to three hours. By this time, the unit will have warmed up and any con- densation will have evaporated.
For European Models
Declaration of Conformity
We, ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY
GROEBENZELL, GERMANY
ONKYO EUROPE ELECTRONICS GmbH K. MIYAGI
declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3.
3
4
PrecautionsContinued
This unit contains a semiconductor laser system and is classied as a CLASS 1 LASER PRODUCT. So, to use this model properly, read this Instruction Manual carefully. In case of any trouble, please contact the store where you purchased the unit. To prevent being exposed to the laser beam, do not try to open the enclosure.
DANGER: VISIBLE AND/OR INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. DO NOT STARE INTO BEAM.
CAUTION: THIS PRODUCT UTILIZES A LASER. USE OF CON- TROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECI- FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
The label on the right is applied on the rear panel.
1. This unit is a CLASS 1 LASER PRODUCT and employs a laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove the cover. Refer servicing to qualied personnel.
For British models Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualied service personnel. IMPORTANT The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral Brown: Live
As the colours of the wires in the mains lead of this appa- ratus may not correspond with the coloured markings identifying the terminals in your plug, proceed as fol- lows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. IMPORTANT The plug is tted with an appropriate fuse. If the fuse needs to be replaced, the replacement fuse must approved by ASTA or BSI to BS1362 and have the same ampere rating as that indicated on the plug. Check for the ASTA mark or the BSI mark on the body of the fuse. If the power cords plug is not suitable for your socket outlets, cut it off and t a suitable plug. Fit a suitable fuse in the plug.
Supplied Accessories Make sure you have the following accessories:
* In catalogs and on packaging, the letter at the end of the product name indicates the color. Specications and operations are the same regardless of color.
Remote controller and two batteries (AA/R6)
Indoor FM antenna (Connector type varies from country to country.)
AM loop antenna
Power cord (Plug type varies from country to country.)
Before Using the CD Receiver
Notes: If the remote controller doesnt work reliably, try
replacing the batteries. Dont mix new and old batteries or different types of
batteries. If you intend not to use the remote controller for a long
time, remove the batteries to prevent damage from leakage or corrosion.
Expired batteries should be removed as soon as possi- ble to prevent damage from leakage or corrosion.
When you operate the remote controller, point it at the CD receivers remote control sensor, as shown below.
Notes: The remote controller may not work reliably if the CD
receiver is subjected to bright light, such as direct sun- light or inverter-type uorescent lights. Keep this in mind when installing.
If another remote controller of the same type is used in the same room, or the CD receiver is installed close to equipment that uses infrared rays, the remote control- ler may not work reliably.
Dont put anything, such as a book, on the remote con- troller because the buttons may be pressed inadvert- ently, thereby draining the batteries.
The remote controller may not work reliably if the CD receiver is installed in a rack behind colored glass doors. Keep this in mind when installing.
The remote controller will not work if theres an obsta- cle between it and the CD receivers remote control sensor.
Installing the Batteries
1 Detach the battery cover by pressing the tab and pulling up the cover.
2 Insert two AA-size batteries into the bat- tery compartment. Carefully follow the polarity diagram (positive (+) and negative () symbols) inside the battery compartment.
3 After the batteries are installed and seated correctly, attach the compartment cover.
Using the Remote Controller
Approx. 5 m
(16 ft.)
Remote control sensor
CD receiver
5
6
Features
Amplier
WRAT (Wide Range Amplier Technology) High Current, Low Impedance Drive Discrete Output Stage Circuitry Optimum Gain Volume Circuitry Subwoofer Pre Out
CR-515 VLSC (Vector Linear Shaping Circuitry)* 4 Audio Inputs and 2 Outputs (1 on front panel)
CR-315 3 Audio Inputs (1 on front panel) and 1 Output
CD Player
Plays CDs, MP3 CDs, CD-Rs and CD-RWs 25 Track Programming 2 Repeat Mode (Track/Full) 4 Play Modes (Normal/Random/Memory/1 Folder)
CR-515 Wolfson Multi-Bit
CR-315 Single-Bit D/A Converter
Tuner & Other
4-Program Timer (Play or Rec / Once or Every) Sleep Timer Battery-Free Memory Backup Headphone Jack Aluminium Front Panel RI-Dock Compatible Remote Control (iPod Control
Capable)
* VLSC and the VLSC logo are registered trademarks of Onkyo Corporation.
Contents
Basic Operations
Getting Started
Important Safety Instructions .............................. 2 Precautions ........................................................ 3 Supplied Accessories ......................................... 4 Before Using the CD Receiver ........................... 5
Installing the Batteries .................................... 5 Using the Remote Controller .......................... 5
Features ............................................................. 6 Contents ............................................................. 7 Getting to Know the CD Receiver ...................... 8
Front Panel ..................................................... 8 Display ......................................................... 10 Rear Panel ................................................... 11 Remote Controller ........................................ 12
Disc Notes ........................................................ 14
Connections
Connecting Antennas ....................................... 16 Connecting Speakers ....................................... 18 Connecting the Power Cord ............................. 25 First Time Setup (European Model Only) ........ 26
Setting the Clock with the AccuClock Function (European Model Only) ............................. 26
Basic Operation
Basic Operation ............................................... 27 Turning On the CD Receiver ........................ 27 Adjusting the Volume ................................... 27 Selecting the Input Source ........................... 27 Using Headphones ....................................... 27 Adjusting the Bass and Treble ..................... 28 Using the Super Bass Function .................... 28 Using the Direct Function ............................. 28 Muting the Sound ......................................... 28 Changing the Input Display .......................... 29
Playing a Disc
Playing CDs ..................................................... 30 Using the Remote Controller ........................ 31 Displaying CD Information ........................... 31 Selecting/Playing MP3 Files ......................... 32 Displaying MP3 Information ......................... 34
Listening to the Radio
Listening to the Radio ...................................... 39 Tuning into Radio Stations ............................ 39 Presetting FM Stations Automatically
(Auto Preset) ............................................. 40 Presetting AM/FM Stations Manually ........... 41 Selecting Preset Stations ............................. 42 Displaying Radio Information ....................... 43 Receiving RDS ............................................. 43
Clock and Timer
Setting the Clock ..............................................47 Setting AccuClock to Use a Specific
Station (European Model Only)...................47 Setting the Clock Manually ...........................48
Using the Timers ..............................................49 About the Timers ..........................................49 Programming the Timers ..............................50 Turning Timers On and Off ...........................52 Checking Timer Settings ..............................52 Using the Sleep Timer ..................................53
Miscellaneous
Troubleshooting ................................................54 Specifications ...................................................57
Advanced Operations
Connecting Other Components ........................19 About Connections .......................................19 Cables and Jacks .........................................19 Connecting a Subwoofer ..............................19 Connecting an Onkyo Cassette Deck ...........20 Connecting an Onkyo MD recorder ..............21 Connecting an Onkyo RI Dock
(Remote Interactive Dock) .........................22 Connecting an Onkyo CD Recorder
(CR-515) ....................................................23 Connecting a Portable Audio Device.............23 Connecting a Component with a Digital Audio
Output (CR-515 Asian model only) .............24 Connecting a TV ...........................................25
Memory Playback .........................................35 Random Playback ........................................36 Repeat Playback ..........................................36 Setting MP3 Preferences ..............................37
Naming Presets ............................................44 Copying Presets ...........................................45 Erasing a Presets Name ..............................46 Erasing Presets ............................................46
7
8
Getting to Know the CD Receiver
Front Panel
1 2 3 54
6 7 M N O98 J K L
1 2 3 54
6 P N OQ98 J MR
CR-515
CR-315
Getting to Know the CD ReceiverContinued
The page numbers in parentheses show where you can nd the main explanation for each item.
A STANDBY indicator (25, 27) Lights up in Standby mode.
B STANDBY/ON button (27, 48, 51, 54) Sets the CD receiver to On or Standby.
C Remote control sensor (5) Receives control signals from the remote controller.
D Display See Display on page 10.
E VOLUME control (27) Adjusts the volume level. On the CR-515, the volume control indicator lights up when the CD receiver is on.
F PHONES jack (27) This stereo minijack is for connecting a pair of ste- reo headphones for private listening.
G LINE 2 IN jack (CR-515) (23) This stereo minijack is for connecting an audio source, such as an MP3 music player or personal computer.
H Disc tray (30) The CD is loaded here.
I INPUT button (27, 29, 40, 42) Used to select the input source.
J DIRECT button (28) Used with the Direct function. On the CR-515, the DIRECT buttons indicator lights up when the Direct function is on.
K TONE button (CR-515) (28) Used to adjust the bass and treble.
L Multi control (CR-515) (30, 42) Used to select radio presets, tracks, and MP3 fold- ers. Also used to select and set various functions and settings.
M Eject [ ] button (30) Ejects the loaded CD.
N Stop [ ] button (30, 54) Stops CD playback.
O Play/Pause [ ] button (30) Starts CD playback. Pressing it during playback pauses playback.
P LINE IN jack (CR-315) (23) This stereo minijack is for connecting an audio source, such as an MP3 music player or personal computer.
Q DISPLAY button (CR-315) (31, 34, 43) Used to change the information shown on the dis- play. Also used to select characters when naming radio presets.
R Previous and Next [ ]/[ ] buttons (CR-315) (30) The Previous [ ] button selects the previous track. During playback it selects the beginning of the current track. The Next [ ] button selects the next track.
/
9
10
Getting to Know the CD ReceiverContinued
A SLEEP indicator Lights up when the Sleep function has been set.
B MP3 indicator Lights up when an MP3 CD is loaded.
C PCM indicator Lights up when the digital input signal received by the DIGITAL IN jack is PCM. It ashes if the signal is not PCM or the CD receiver is not locked to the incoming digital signal.
D FOLDER indicator Lights up while the number of an MP3 folder is being displayed.
E DIRECT indicator Lights up when the Direct function is on.
F S.BASS indicator Lights up when the Super Bass function is on.
G MUTING indicator Flashes while the CD receiver is muted.
H Playback mode indicators
1FOLDER: Lights up when 1-folder playback is selected.
MEMORY: Lights up when memory playback is selected.
RANDOM: Lights up when random playback is selected.
REPEAT: Lights up when repeat playback is selected for all tracks.
REPEAT 1: Lights up when repeat playback is selected for one track.
I Play and pause indicators The Play indicator lights up for playback. The Pause indicator lights up while playback is paused.
J TIMER indicators Show the status of the timers.
TIMER: Lights up when a timer has been pro- grammed.
1, 2, 3, 4: Light up when a timer has been pro- grammed.
: Lights up when a timer has been programmed for recording.
K Tuning indicators
AUTO: Lights up when Auto Tuning is selected, and disappears when Manual Tuning is selected.
: Lights up when the CD receiver is tuned to a radio station.
FM ST: Lights up when the CD receiver is tuned to a stereo FM station.
RDS (European model only): Lights up when the CD receiver is tuned to a radio station that sup- ports RDS (Radio Data System).
L FILE indicator Lights up when an MP3 le number is being dis- played.
M TRACK indicator Lights up when a CD track number is being dis- played.
N TITLE, ARTIST and ALBUM indicators TITLE lights up when the title (ID3 tag) of an MP3 track is being displayed. ARTIST lights up when the artist name from an MP3 track (ID3 tag) is being displayed. ALBUM lights up when the album name from an MP3 track (ID3 tag) is being displayed.
O DISC, TOTAL, and REMAIN indicators These indicators light up when the total time or the remaining disc or track time is being displayed.
P Message area Various information is displayed here, including radio preset numbers, tuning frequency, current time, volume level, sleep time, mode settings, and so on.
Display
9 J K L M N O P
1 2 43 5 6 7 8
/
Getting to Know the CD ReceiverContinued
The page numbers in parentheses show where you can nd the main explanation for each item.
A LINE 1 IN (CR-515) (25) This analog audio input is for connecting a compo- nent with an analog output, such as a TV, or a turn- table with a built-in phono equalizer.
B MD/TAPE IN/OUT (20, 21) These analog audio inputs and outputs are for con- necting a recorder with an analog input and output, such as a MiniDisc recorder or cassette deck.
C DOCK/CDR IN/OUT (CR-515) (22, 23) These analog audio inputs and outputs are for con- necting a recorder with an analog input and output such as a CD recorder, or an Onkyo RI Dock.
D AM ANTENNA (16, 17) These push terminals are for connecting an AM antenna.
E FM ANTENNA (16, 17) This jack is for connecting an FM antenna.
F SUBWOOFER PRE OUT (19) This jack is for connecting a powered subwoofer.
G SPEAKERS (18) These terminal posts are for connecting speakers. The North American CR-315 has push-type termi- nals.
H REMOTE CONTROL (2024) This (Remote Interactive) jack can be con- nected to an jack on another Onkyo component. The CD receivers remote controller can then be used to control that component. To use , you must make an analog audio connection (RCA) between the CD receiver and the other component, even if they are connected digitally.
I OPTICAL DIGITAL IN (CR-515 Asian model only) (24) This optical digital audio input can be used to con- nect a component with an optical digital output, such as a CD recorder, MD recorder, games con- sole, satellite tuner, or personal computer. Use a commercially available optical digital audio cable to make the connection.
J AC INLET (25) The supplied power cord is connected here.
K DOCK IN (CR-315) (22) This analog audio input is for connecting an Onkyo RI Dock.
Rear Panel
IN
DOCK
IN
IN
R
LINE 1
MD/ TAPE
L IN
OUT
OUT
DOCK/ CDR
AC INLET
IN
OUT
R
MD/ TAPE
L
1
K
2 3 74 5 6
8 9 J
CR-515
CR-315
See pages 1625 for connection information.
11
12
Getting to Know the CD ReceiverContinued
Remote Controller
K
O
M
Q
R
T
S
P
U
V
B
A
3
5
J
4
L
6
7
N
8
9
K
O
M
Q
R
T
S
P
U
V
B
A
3
5
J
4
L
6
7
N
8
9
RC-662S (CR-515)
RC-660S (CR-315)
Getting to Know the CD ReceiverContinued
The page numbers in parentheses show where you can nd the main explanation for each item.
A STANDBY/ON button (27, 51) This button is used to set the CD receiver to On or Standby.
B SLEEP button (53) Used to set the Sleep timer, which turns off the CD receiver after a specied time.
C Number buttons (31, 33, 35, 42, 44, 50) Used to select tracks and radio presets. Also used to set the clock manually, set the timers, and enter names for radio presets. Can also be used with an Onkyo RI Dock or CD recorder.
D TIMER button (26, 47, 48, 50, 52) Used to set the timers and clock.
E MENU/NO/CLEAR button (29, 37, 40, 41, 4446) Used with various functions and settings for select- ing, cancelling, and deleting. With an Onkyo CD recorder, it works as a clear button. With an Onkyo RI Dock, it works as a mode button.
F Previous/Next [ ]/[ ] and [ PRESET]/[PRESET ] buttons (31, 42) Used to select the previous or next track or radio preset. Can also be used with an Onkyo RI Dock or CD recorder. With an Onkyo cassette deck, they work as rewind and fast forward buttons.
G Rewind/Fast Forward [ ]/[ ] and [ TUN]/[TUN ] buttons (31, 39, 47) Used to rewind or fast forward CD playback. Can also be used with an Onkyo RI Dock or CD recorder. Also used to tune the radio and edit preset names.
H CD control buttons (31) : Pauses playback. : Stops playback. : Starts playback.
I VOLUME [ / ] buttons (27, 31) Adjust the volume level.
J S.BASS button (28) Sets the Super Bass function.
K Onkyo RI Dock and CD recorder control buttons
: Pauses playback or recording. : Stops playback or recording. : Starts playback or resumes recording.
L Onkyo MD recorder and cassette deck control buttons For twin cassette decks, only Deck B can be con- trolled.
: Plays side B (cassette deck). : Pauses playback or recording (MD). : Stops playback, recording, fast-forward, or
rewind. : Plays side A.
M CLOCK CALL button (48) Calls up the clock to display the day and time.
N INPUT [ ]/[ ] buttons (27, 29, 40, 42) Used to select the input source.
O DISPLAY button (31, 34, 43, 44, 48) Used to change the information shown on the dis- play. Also used to select characters when naming radio presets. Can also be used with an Onkyo CD recorder. With an Onkyo RI Dock, it works as a backlight button.
P FOLDER button (32, 33, 34, 38) Used to select MP3 folders.
Q REPEAT button (36) Sets repeat playback. Can also be used with an Onkyo RI Dock or CD recorder. With an Onkyo cassette deck, it works as a reverse mode button.
R TONE button (28) Used to adjust the bass and treble.
S YES/MODE/SHUFFLE button (3436, , 39) Used with various functions and settings for con- rming, selecting modes, and selecting shufe play- back.
T ENTER button Used to conrm various functions and settings. Can also be used with an Onkyo RI Dock or CD recorder.
U MUTING button (28) Mutes the output of the CD receiver.
V TUNER/BAND button (39, 40, 42) Selects AM or FM radio as the input source.
13
14
Disc Notes
Supported Discs
The CD receiver supports the following discs.
Some audio CDs use copy protection that doesnt con- form to the ofcial CD standard. Since these are non- standard discs, they may not play properly in the CD receiver.
The CD receiver supports CD-R and CD-RW discs. However, some CD-R and CD-RW discs may not work properly for any of the following reasons: disc burner characteristics, disc characteristics, the disc is damaged or dirty. See the manual supplied with your disc burner for more information. Condensation or dirt on the optical pickup lens can also affect playback.
The CD receiver supports 8 cm and 12 cm discs. The CD receiver does not support disc types not listed. Dont use discs with an unusual shape, such as those
shown below, as you may damage the CD receiver.
Dont use discs that have residue from adhesive tape, rental discs with peeling labels, or discs with custom- made labels or stickers. Doing so may damage the CD receiver and you may not be able to remove the disc properly.
Discs Made on Personal Computers
Discs made on personal computers, including those of a compatible format, may not work properly in the CD receiver because of incorrect settings in the disc burning software. Check the manuals supplied with your disc burning software for additional compatibility informa- tion.
MP3 Compatibility
MP3 discs must be ISO 9660 Level 1 or Level 2, Romeo or Joliet compliant. Supported formats: Mode 1, Mode 2 XA Form 1.
Folders can be up to eight levels deep. MP3 les must be MPEG-1/MPEG-2 Audio Layer 3
format with a sampling rate of between 8 kHz and 48 kHz and a bit-rate of between 8 kbps and 320 kbps (128 kbps recommended). Incompatible les cannot be played.
Constant bit rate MP3 les are recommended, how- ever, variable bit-rate (VBR) MP3 les between 8 kbps and 320 kbps are supported. (Playing times may not display correctly.)
MP3 les must have a .mp3 or .MP3 le name extension. MP3 les without the proper extension will not be recognized. To prevent noise and malfunction, do not use these extensions for other types of les.
The CD receiver supports up to 499 MP3 les and folders. Files and folders in excess of this cannot be played. Note that if the le and folder structure is very complicated, the CD receiver may not be able to read or play all of the MP3 les on the disc.
Disc, le, and folder names may contain up to 32 char- acters.
The maximum time that can be displayed for a single le is 99 minutes and 59 seconds.
The remaining time cannot be displayed when playing MP3 les.
MP3 le and folder names (excluding the extension) are shown on the display.
Multisession discs are supported, however, some mul- tisession discs may take a long time to load and some may not load at all. When burning CDs, we recom- mend that you use a single-session (disc-at-once), and select Disc Close.
Normally, the music in the audio session of a CD Extra disc is played. However, you can set the CD receiver so that it plays any MP3 les in the data session of a CD-R/RW disc instead. If the data session contains no MP3 les, the audio session will be played regardless. See Setting MP3 Preferences on page 37 for more information.
The Emphasis is not supported.
Disc Logo Format or le type
Audio CD PCM
CD-R
Audio CD, MP3
MP3
CD-RW
Audio CD, MP3
MP3
CD Extra Audio CD (Session 1), MP3 (Session 2)
Disc NotesContinued
The following ID3 tags are supported: versions 1.0/1.1 and 2.2/2.3/2.4. Versions 2.5 and later are not sup- ported. Normally, version 2.2/2.3/2.4 tags have prior- ity and will be displayed regardless of the ID3 VER 1 preference on page 37.
For ID3 version 2 tags, the tag information recognized will be those embedded in the beginning of the le. We recommend that you include only title, artist name, and album name information in ID3 tags. Com- pressed, encrypted, and unsynchronized ID3 tags can- not be displayed.
Note: With CD-ROM, CD-R, and CD-RW discs that contain many les and folders and les other than MP3s, it may take a long time to read the disc. We recommend that you include only MP3 les on your discs, use about 20 fold- ers, and limit folder nesting to three levels deep.
Disc Content Organization
CD CDs contain tracks.
MP3 MP3 discs contain MP3 les organized into folders.
Handling Discs
Never touch the underside of a disc. Always hold discs by the edge, as shown.
Never attach adhesive tape or sticky labels to discs.
Cleaning Discs
For best results, keep your discs clean. Fingerprints and dust can affect the sound quality and should be removed as follows. Using a clean soft cloth, wipe from the center outwards, as shown. Never wipe in a circular direction.
To remove stubborn dust or dirt, wipe the disc with a damp soft cloth, and then dry it with a dry cloth.
Never use solvent-based cleaning uids, such as thin- ner or benzine, commercially available cleaners, or antistatic sprays intended for vinyl records, as they may damage the disc.
Storing Discs
Dont store discs in places subject to direct sunlight or near heat sources.
Dont store discs in places subject to moisture or dust, such as in a bathroom or near a humidier.
Always store discs in their cases and vertically. Stack- ing, or putting objects on unprotected discs may cause warping, scratches, or other damage.
Track 2 Track 3 Track 4Track 1
Audio CD
Track 5
Folder 1 Folder 2
File 2 File 3 File 1File 1 File 2
MP3 (CD-R/CD-RW)
Underside
15
16
Connecting Antennas
This section explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas. The CD receiver wont pick up any radio signals without an antenna connected, so you must connect the antenna to use the tuner.
Connecting the Indoor FM Antenna
The supplied indoor FM antenna is for indoor use only.
If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available out- door FM antenna instead (see page 17).
Connecting the AM Loop Antenna
The supplied indoor AM loop antenna is for indoor use only.
If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commer- cially available outdoor AM antenna (see page 17).
1 Attach the FM antenna, as shown. North American Model
Other Models
Once the CD receiver is ready for use, youll need to tune into an FM radio station and adjust the position of the FM antenna to achieve the best possible reception.
2 Use thumbtacks or something similar to x the FM antenna into position.
Caution: Be careful that you dont injure yourself when using thumbtacks.
IN
IN
R
LINE 1
MD/ TAPE
L IN
OUT
OUT
DOCK/ CDR
AC INLET
AM antenna push terminals FM antenna jack
Insert the plug fully into the jack.
Insert the plug fully into the jack.
Thumbtacks, etc.
1 Assemble the AM loop antenna, inserting the tabs into the base, as shown.
2 Connect both wires of the AM loop antenna to the AM push terminals, as shown. (The antennas wires are not polarity sensitive, so they can be connected either way around). Make sure that the wires are attached securely and that the push terminals are gripping the bare wires, not the insulation.
Once the CD receiver is ready for use, youll need to tune into an AM radio station and adjust the position of the AM antenna to achieve the best possible reception. Keep the antenna as far away as possible from the CD receiver, TV, speaker cables, and power cords.
Push Insert wire Release
Connecting AntennasContinued
Connecting an Outdoor FM Antenna
If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available out- door FM antenna instead.
Notes: Outdoor FM antennas work best outside, but usable
results can sometimes be obtained when installed in an attic or loft.
For best results, install the outdoor FM antenna well away from tall buildings, preferably with a clear line of sight to your local FM transmitter.
Outdoor antenna should be located away from possi- ble noise sources, such as neon signs, busy roads, etc.
For safety reasons, outdoor antenna should be situated well away from power lines and other high-voltage equipment.
Outdoor antenna must be grounded in accordance with local regulations to prevent electrical shock haz- ards.
Using a TV/FM Antenna Splitter Its best not to use the same antenna for both FM and TV reception, as this can cause interference problems. If cir- cumstances demand it, use a TV/FM antenna splitter, as shown.
Connecting an Outdoor AM Antenna
If good reception cannot be achieved using the supplied AM loop antenna, an outdoor AM antenna can be used in addition to the loop antenna, as shown.
Outdoor AM antennas work best when installed horizon- tally outside, but good results can sometimes be obtained indoors by mounting horizontally above a window. Note that the AM loop antenna should be left connected. Outdoor antenna must be grounded in accordance with local regulations to prevent electrical shock hazards.
To CD receiver To TV (or VCR)
TV/FM antenna splitter
Outdoor antenna
AM loop antenna Insulated antenna cable
17
18
Connecting Speakers
Connecting Your Speakers
Connect the right speaker to the CD receivers right (R) SPEAKERS terminals. Connect the left speaker to the left (L) SPEAKERS terminals.
Connect the positive (+) terminal on each speaker to the corresponding positive (+) terminal on the CD receiver. Connect the negative () terminal on each speaker to the corresponding negative () terminal on the CD receiver. Use the red wires to connect the positive (+) terminals.
Connect only speakers with an impedance of between 4 and 16 ohms. Connecting a speaker with a lower impedance may damage the speaker.
Be careful not to short the positive and negative wires. Doing so may damage the CD receiver.
Do not connect both speaker cables to the same L or R terminals (Fig. 1). Do not connect more than two speaker terminals to each speaker (Fig. 2).
IN
IN
R
LINE 1
MD/ TAPE
L IN
OUT
OUT
DOCK/ CDR
AC INLET
SPEAKERS
R L
Push-type terminals Strip about 10 mm (3/8") of insulation from the ends of the speaker cables, and twist the bare wires tightly. Push the lever and insert the bare wires. Release the lever. Make sure the terminal is gripping the bare wires and not the insulation.
Red wires
Right speaker Left speaker
Speaker cable
Terminal posts Strip about 15 mm (5/8") of insulation from the ends of the speaker cables, and twist the bare wires tightly. Unscrew the terminal. Fully insert the bare wire, making sure that its touching the threaded shaft in the center. Screw the terminal tight.
SPEAKERS
R L R L
Fig. 1 Fig. 2
Connecting Other Components
Before making any connections, read the manuals supplied with your other components.
Dont connect the power cord until youve completed and double-checked all connections.
Connection Color Coding
RCA-type audio connections are usually color-coded: red and white. Use red plugs to connect right-channel audio inputs and outputs (typically labeled R). Use white plugs to connect left-channel audio inputs and out- puts (typically labeled L).
Push plugs in all the way to make good connections (loose connec- tions can cause noise or malfunc- tions).
To prevent interference, keep audio cables away from power cords and speaker cables.
Optical Digital Jack (CR-515)
The CD receivers optical digital jack has a shutter-type cover that opens when an optical plug is inserted and closes when its removed. Push the plug in all the way.
Caution: To prevent shutter damage, hold the optical plug straight when inserting and removing.
Note: Do not put anything on top of the CD receiver, as it may interfere with proper ventilation.
No connecting cables are included with the CD receiver.
The CD receiver has a SUBWOOFER PRE OUT jack for connecting a powered subwoofer (i.e., a subwoofer with a built-in amplier).
About Connections
Left (white)
Right (red)
Analog audio cable Left (white)
Right (red)
Right!
Wrong!
Cables and Jacks
Cable Jack Description
Analog audio cable (RCA)
This cable carries analog audio.
Optical digital audio cable
This cable carries digital audio.
Stereo miniplug cable
This cable carries analog audio.
R L
OPTICAL
Connecting a Subwoofer
IN
IN
R
LINE 1
MD/ TAPE
L IN
OUT
OUT
DOCK/ CDR
AC INLET
PRE OUT
SUB WOOFER
: Signal ow
Powered subwoofer CD receiver
19
20
Connecting Other ComponentsContinued
The following diagram shows how to connect an optional Onkyo cassette deck. Connect the CD receivers MD/TAPE OUT jacks to the cassette decks INPUT (REC) jacks, and connect the CD receivers MD/TAPE IN jacks to the cassette decks OUTPUT (PLAY) jacks.
What can you do with ? Connecting an Onkyo cassette deck to the CD receiver with an cable allows you to control the cassette deck with
the CD receivers remote controller. In addition, when playback is started on the cassette deck, the CD receiver will automatically select it as the input source.
To use , you must connect the Onkyo cassette deck to the CD receiver with an cable and an analog audio cable (RCA). In addition, the Input Display for the MD/TAPE jacks must be set to TAPE. Since this is the default setting, unless youve changed it, it can be left as it is (see page 29).
Some -capable components have two jacks. Theyre both the same, so you can use either one. The extra jack is for connecting additional -capable components.
Connecting an Onkyo Cassette Deck
IN
IN
OUT
R
DOCK
MD/ TAPE
L
IN
IN
R
LINE 1
MD/ TAPE
L IN
OUT
OUT
DOCK/ CDR
(REC) (PLAY) INPUT OUTPUT
REMOTE CONTROL
L
R
(REC) (PLAY) INPUT OUTPUT
REMOTE CONTROL
L
R
: Signal ow
Onkyo cassette decks rear panel
Analog audio cables (RCA)
cable supplied with the Onkyo cassette deck
White
Red
White
Red Red
Red
White White
CR-515s rear panel
CR-315s rear panel
Onkyo cassette decks rear panel
Analog audio cables (RCA)
cable supplied with the Onkyo cassette deck
White
Red
White
Red
Red
White WhiteRed
Connecting Other ComponentsContinued
The following diagram shows how to connect an optional Onkyo MD recorder. Connect the CD receivers MD/TAPE OUT jacks to the MD recorders INPUT (REC) jacks, and connect the CD receivers MD/TAPE IN jacks to the MD recorders OUTPUT (PLAY) jacks.
What can you do with ? Connecting an Onkyo MD recorder to the CD receiver with an cable allows you to control the MD recorder with
the CD receivers remote controller. In addition, when playback is started on the MD recorder, the CD receiver will automatically select it as the input source.
To use , you must connect the Onkyo MD recorder to the CD receiver with an cable and an analog audio cable (RCA). In addition, the Input Display for the MD/TAPE jacks must be set to MD (see page 29).
Some -capable components have two jacks. Theyre both the same, so you can use either one. The extra jack is for connecting additional -capable components.
Note: The MD/TAPE jacks can alternatively be used to connect a VCR or DAT recorder, in which case the Input Display
on the CD receiver would need to be set to VCR or DAT respectively (see page 29).
Connecting an Onkyo MD recorder
IN
IN
OUT
R
DOCK
MD/ TAPE
L
IN
IN
R
LINE 1
MD/ TAPE
L IN
OUT
OUT
DOCK/ CDR
(REC) (PLAY) INPUT OUTPUT
REMOTE CONTROL
L
R
(REC) (PLAY) INPUT OUTPUT
REMOTE CONTROL
L
R
: Signal ow
Onkyo MD recorders rear panel
Analog audio cables (RCA)
cable supplied with the Onkyo MD recorder
White
Red
White
Red Red
Red
White White
CR-515s rear panel
CR-315s rear panel
Onkyo MD recorders rear panel
Analog audio cables (RCA)
cable supplied with the Onkyo MD recorder
White
Red
White
Red
Red
White WhiteRed
21
22
Connecting Other ComponentsContinued
The following diagram shows how to connect an optional Onkyo RI Dock (Remote Interactive Dock). Connect the CD receivers DOCK/CDR IN jacks (DOCK IN jacks on the CR-315) to the RI Docks AUDIO OUT jacks.
What can you do with ? Connecting an Onkyo RI Dock to the CD receiver with an cable allows you to control the RI Dock with the CD
receivers remote controller. In addition, when playback is started on the RI Dock, the CD receiver will automatically select it as the input source.
To use , you must connect the RI Dock to the CD receiver with an cable and an analog audio cable (RCA). On the RI Dock, set the MODE switch to HDD. See the RI Docks instruction manual for details.
CR-515 To use , the Input Display for the DOCK/CDR jacks must be set to DOCK. Since this is the default setting,
unless youve changed it, it can be left as it is (see page 29).
Connecting an Onkyo RI Dock (Remote Interactive Dock)
IN
IN
OUT
R
DOCK
MD/ TAPE
L
IN
IN
R
LINE 1
MD/ TAPE
L IN
OUT
OUT
DOCK/ CDR
R
AUDIO OUT DC INS VIDEO OUT ---- L
R
AUDIO OUT DC INS VIDEO OUT ---- L
: Signal ow
CR-515s rear panel
White
Red
Red
White
Analog audio cable (RCA)
cable supplied with the RI Dock
Onkyo RI Docks rear panel
CR-315s rear panel
White
Red
Red
White
Analog audio cable (RCA)
cable supplied with the RI Dock
Onkyo RI Docks rear panel
Connecting Other ComponentsContinued
The following diagram shows how to connect an optional Onkyo CD recorder. Connect the CD receivers DOCK/CDR OUT jacks to the CD recorders INPUT (REC) jacks, and connect the CD receivers DOCK/CDR IN jacks to the CD recorders OUTPUT (PLAY) jacks.
What can you do with ? Connecting an Onkyo CD recorder to the CD receiver with an cable allows you to control the CD recorder with
the CD receivers remote controller. In addition, when playback is started on the CD recorder, the CD receiver will automatically select it as the input source.
To use , you must connect the Onkyo CD recorder to the CD receiver with an cable and an analog audio cable (RCA). In addition, the Input Display for the DOCK/CDR jacks must be set to CDR (see page 29).
Some -capable components have two jacks. Theyre both the same, so you can use either one. The extra jack is for connecting additional -capable components.
The following diagram shows how to connect a portable audio device (e.g., MP3 player, MD player, CD player). Connect the CD receivers LINE 2 IN jack (LINE IN jack on the CR-315) on the front panel to the portable audio devices output jack. Depending on the type of output jack on the portable audio device, you may need to buy a suitable cable. The CD receivers LINE 2 IN jack (LINE IN jack on the CR-315) accepts a stereo miniplug.
Notes: Use a connecting cable that doesnt have any attenuation resistors in it. If you connect a portable audio devices headphone output to the CD receivers LINE2 IN jack (LINE IN jack on the
CR-315), turn down the volume on the portable audio device before you connect it. When you connect a portable audio device to the CD receiver, make sure you connect it to the LINE 2 IN jack (LINE
IN jack on the CR-315) and not the adjacent PHONES jack. If you connect to the PHONES jack by mistake, it may cause the PHONES output to malfunction.
Connecting an Onkyo CD Recorder (CR-515)
Connecting a Portable Audio Device
IN
IN
R
LINE 1
MD/ TAPE
L IN
OUT
OUT
DOCK/ CDR
(REC) (PLAY) INPUT OUTPUT
REMOTE CONTROL
L
R
: Signal ow
Onkyo CD recorders rear panel
Analog audio cable (RCA)
cable supplied with the Onkyo CD recorder
White
Red
White
Red Red
Red
White White
CR-515s rear panel
: Signal ow
CR-515s front panel
Stereo miniplug cable
Portable audio devices output jack
23
24
Connecting Other ComponentsContinued
The following diagram shows how to connect a component with an optical digital audio output, such as a CD recorder, MD recorder, games console, satellite tuner, or personal computer. Connect the CD receivers OPTICAL DIGITAL IN jack to an optical digital audio output on the other component. You can change the Input Display for the OPTICAL DIGITAL IN to DIGITAL, CDR, PC, or GAME so that it matches the type of component that you connect (see page 29).
Connecting an Onkyo Component with a Digital Audio Output
The following diagram shows how to connect an Onkyo component with an optical digital audio output. Connect the CD receivers OPTICAL DIGITAL IN jack to an optical digital audio output on the Onkyo component.
What can you do with ? Connecting an Onkyo component to the CD receiver with an cable allows you to control the component with the
CD receivers remote controller. In addition, when playback is started on the component, the CD receiver will auto- matically select it as the input source.
To use , you must connect the Onkyo component to the CD receiver with an cable and an analog audio cable (RCA). In addition, you must change the Input Display for the DIGITAL IN so that it matches the type of component that you connect. When you connect a CD recorder to the DOCK/CDR jacks and OPTICAL DIGITAL IN jack, you must set the Input Display for DOCK/CDR to CD-R, and set the Input Display for OPTICAL DIGITAL IN to CD-R/dig (see page 29).
If you connect an audio processor such as the Onkyo UE-205, you must set the Input Display for DOCK/CDR to PC, and set the Input Display for OPTICAL DIGITAL IN to PC/dig, otherwise the wrong input source may be selected when playback starts (see page 29).
Some -capable components have two jacks. Theyre both the same, so you can use either one. The extra jack is for connecting additional -capable components.
Connecting a Component with a Digital Audio Output (CR-515 Asian model only)
DIGITAL OUTPUT
Satellite tuner, CD recorder, etc.
Optical digital audio cable
: Signal ow
CR-515 Asian models rear panel
Personal computer
IN
R
MD/ TAPE
L IN
OUT
OUT
DOCK/ CDR
REMOTE CONTROL
DIGITAL OUTPUT
(REC) (PLAY) INPUT OUTPUT
L
R
Onkyo component with a digital audio output
cable
: Signal ow
Optical digital audio cable
CR-515 Asian models rear panel
Analog audio cable (RCA)
White
Red
White
Red Red
Red
White White
Connecting Other ComponentsContinued
Connect the CD receivers LINE 1 IN jacks (use the DOCK IN jacks on the CR-315) to the TVs audio output jacks.
Hint: To listen to the TV, select the LINE 1 input source (select DOCK on the CR-315).
Connecting the Power Cord
Notes: Before connecting the power cord, connect all of your speakers and AV components. Turning on the CD receiver may cause a momentary power surge that might interfere with other electrical equipment
on the same circuit. If this is a problem, plug the CD receiver into a different branch circuit. Do not use a power cord other than the one supplied with the CD receiver. The supplied power cord is designed
exclusively for use with the CD receiver and should not be used with any other equipment. Never disconnect the power cord from the CD receiver while the other end is still plugged into a wall outlet. Doing
so may cause an electric shock. Always disconnect the power cord from the wall outlet rst, and then the CD receiver.
To set the clock with the AccuClock function, the CD receiver must be able to receive RDS radio stations, which means an FM antenna must be connected (see page 16).
Connecting a TV
IN
IN
R
LINE 1
MD/ TAPE
L IN
OUT
OUT
DOCK/ CDR
: Signal ow
CR-515s rear panel
White
Red
Red White
Analog audio cable (RCA)
TV
AC INLET
IN
IN
OUT
R
DOCK
MD/ TAPE
L
1 2
IN
IN
R
LINE 1
MD/ TAPE
L IN
OUT
OUT
DOCK/ CDR
AC INLET
1 2
CR-315
To wall outlet Supplied power cord
CR-515
To wall outlet Supplied power cord
1 Connect the supplied power cord to the CD receivers AC INLET.
2 Plug the power cord into a suitable wall outlet. The STANDBY indicator lights up.
25
26
First Time Setup (European Model Only)
To use the AccuClock function, the CD receiver must be able to receive RDS radio stations, which means an FM antenna must be connected. Be sure to connect an FM antenna before attempting to use this function (see page 16). The very rst time you turn on the CD receiver, the AccuClock function automatically sets the CD receivers clock based on the CT (Clock Time) information present in an RDS radio broadcast. While the clock is being set, Wait ashes on the display, as shown. Note that it may take up to 5 minutes to set the clock. When the clock has been set, the message Clock Adjusted scrolls across the display, then the day and time are dis- played for a while, as shown.
The AccuClock function automatically updates the clock daily at 2 A.M., 3 A.M., and 2 P.M. If for some reason the clock cannot be set automatically, see Setting AccuClock to Use a Specic Station (European Model Only) on page 47 and Setting the Clock Manually on page 48.
Turning Off the AccuClock Function
If you dont want AccuClock to automatically update the clock each day, you can turn it off as follows.
Note: The AccuClock function cannot be turned off until the clock has been set.
Setting the Clock with the AccuClock Function (European Model Only)
YES/MODE
ENTER
TIMER
1 Press the [TIMER] button repeat- edly until Clock appears on the display.
2 Press [ENTER]. *AccuClock* appears on the display.
3 To turn off AccuClock, press the [YES/MODE] button.
The asterisks disappear, indicating that the AccuClock function is off. To turn AccuClock back on again, press the [YES/MODE] button so that the aster- isks are displayed.
The asterisks indicate that the AccuClock function is on.
Basic Operation
To turn on the CD receiver, press the [STANDBY/ON] button on the CD receiver or remote controller. The STANDBY indicator goes off. Press the [STANDBY/ON] button again to set the CD receiver to Standby. The STANDBY indicator lights up.
Tip: When you start playback on (or turn on) an Onkyo RI Dock, CD recorder, MD recorder, or cassette deck thats connected to the CD receiver with an cable and ana- log audio cable, the CD receiver turns on automatically. Similarly, when you set the CD receiver to On or Standby, the other component will also be set to On or Standby.
Turn the [VOLUME] control clockwise to increase the volume or counterclockwise to decrease it. You can also use remote controllers VOLUME [ ]/[ ] buttons.
You can select CD, AM, FM, or a connected component (TAPE, DOCK, LINE, DIGITAL) as the input source. To select the input source, press the remote controllers INPUT [ ]/[ ] buttons repeatedly. On the CD receiver, press the [INPUT] button repeatedly. The input sources are selected in the following order.
*1 Input Display can be changed (see page 29). *2 CR-515 Asian model only.
Turn down the volume, then connect your stereo head- phones to the PHONES minijack. You can adjust the volume and mute the sound, as explained earlier. The speakers output no sound while the headphones are connected.
VOLUME /
STANDBY/ ON
INPUT / VOLUMESTANDBY/ON
INPUTPHONES
STANDBY indicator
Turning On the CD Receiver
Adjusting the Volume
Remote controller
CD receiver
Remote controller
CD receiver
Selecting the Input Source
Using Headphones
CDDIGITAL FM AM
TAPEDOCKLINE1LINE2 *1*1
*1, *2
CD FM AM
DOCK
TAPE
LINE
*1
CR-515
CR-315
PHONES jack
27
28
Basic OperationContinued
On the CR-515, you can also use the [TONE] button and multi control on the front panel to adjust the bass and treble.
To turn on the Super Bass function, press the [S.BASS] button. The S.BASS indicator lights up. To turn off the Super Bass function, press the [S.BASS] button again. On the CR-515, you can also use the [TONE] button on the front panel. Press the [TONE] button for 3 seconds to turn on the Super Bass function.
Note: If you press the [S.BASS] button while the Direct func- tion is on, the Direct function will be turned off.
To turn the Direct function on or off, press the [DIRECT] button on the CD receiver. When the Direct function is off, the tone controls can be used to adjust the sound. When the Direct function is on, the tone controls are bypassed, so you can enjoy a pure sound, and the DIRECT indicator lights up.
On the remote controller, press the [TONE] button for 3 seconds to turn on the Direct function.
On the CR-515, the [DIRECT] buttons indicator lights up when the Direct function is on.
To mute the output of the CD receiver, press the remote con- trollers [MUTING] button. The MUTING indicator ashes on the display. On the CR-515, the volume control indicator ashes, too.
To unmute the CD receiver, press the [MUTING] button again.
Tips: While the CD receiver is muted: Turning the [VOLUME] control on the CD receiver or
pressing the VOLUME [ ]/[ ] buttons on the remote controller will unmute the CD receiver.
If you turn the CD receiver off, the next time you turn it on, the CD receiver will be unmuted.
MUTINGS.BASS
/ TONE
ENTER
DIRECT
DIRECT TONE
CR-515
CR-315
Adjusting the Bass and Treble
1 Press the [TONE] button to select Bass.
2 Use the Previous and Next [ ]/[ ] buttons to adjust the bass. The default setting is 0. You can adjust the bass and treble from 3 to +3. Press [ENTER], and then use the Previous and Next [ ]/[ ] but- tons to adjust the treble. Notes: If you press no buttons for 8 seconds,
the previous display will appear auto- matically.
If you press the [TONE] button while the Direct function is on, the Direct function will be turned off.
Using the Super Bass Function
Using the Direct Function
Muting the Sound
DIRECT indicator
MUTING indicator
Basic OperationContinued
You can choose what name is displayed when an input source is selected so that it matches the type of component that youve connected to the MD/TAPE IN, DOCK/CDR IN, or DIGITAL IN. When you connect an Onkyo -capable component, its important that you select the input source name that matches the type of component for to work properly.
On the CR-515, you can also use the front panel con- trols. 1 Use the [INPUT] button to select the input source
whose name you want to change. 2 Push the multi control to select Name Select?, and
then push it again. 3 Turn the multi control to select the new input source
name. 4 Push the multi control to conrm your selection.
Input Source Name Abbreviations
Sometimes the input source name may be displayed as a 2-letter abbreviation, as per the following table.
Changing the Input Display
1 Use the INPUT [ ]/[ ] buttons to select the input source whose name you want to change. CR-515: TAPE, DOCK, DIGITAL* (*Asian model only)
CR-315: TAPE
2 Press and hold the [MENU/NO/CLEAR] button until Name Select? ashes on the display, and then press [ENTER].
3 Use the Previous or Next [ ]/[ ] button to select the new input source name.
/ YES/MODE
MENU/NO/ CLEAR
ENTER
INPUT /
Depending on the input source selected in step 1, the input source names are selected in the following orders:
4 Press [ENTER] to conrm your selection.
Complete appears on the display.
Full name Abbreviation
CDR CR
DAT DT
DIGITAL DG
GAME GM
DOCK DC
LINE LI
LINE1 L1
LINE2 L2
MD MD
PC PC
TAPE TP
VIDEO VD
MDTAPE VIDEO
DAT
DOCK CD-R
PC
DIGITAL CD-R/dig
GAME/dig PC/dig
29
30
Playing CDs
Selecting Tracks (CR-515)
To return to the beginning of the track currently playing, turn the multi control a little to the left.
Turn the multi control further to select earlier tracks. While playback is stopped, turn the multi control to
the left to select the previous track.
Turn the multi control to the right to select subse- quent tracks. On MP3 CDs, you can select MP3 les in other folders
(see page 32).
Selecting Tracks (CR-315)
To return to the beginning of the track currently playing, press the Previous [ ] button.
Press the Previous [ ] button repeatedly to select earlier tracks. While playback is stopped, pressing the Previous
[ ] button will select the previous track.
Press the Next [ ] button repeatedly to select sub- sequent tracks. On MP3 CDs, you can select MP3 les in other folders
(see page 32).
/ /
Display
Disc tray
CR-515 CR-315 Display
Disc tray
1 Press the Eject [ ] button to open the disc tray. Tip: Pressing the Eject [ ] button while the CD receiver is on Standby will turn on the CD receiver and open the disc tray.
2 Place the CD on the tray with the label-side facing up. Place 8 cm CDs in the center of the tray.
3 To start playback, press the Play/Pause [ ] button. The disc tray closes and playback starts.
To stop playback: Press the Stop [ ] button. Playback stops automatically when the last track has been played.
To pause playback: Press the Play/Pause [ ] button. The Pause indicator appears. To resume playback, press the Play/Pause [ ] button again.
To remove the CD: Press the Eject [ ] button to open the disc tray.
/
/
/
Total number of tracks
Total playing time
DISC TOTAL lights up while the disc informa- tion is being displayed.
Audio CD Display
Total number of folders
Total number of les
Disc name MP3 CD Display
Playing CDsContinued
During playback or while playback is paused, press the remote controllers [DISPLAY] button repeatedly to display the following CD information.
On the CR-315, you can also use the CD receivers [DISPLAY] button to display this information.
Using the Remote Controller
To select:
Use the number buttons as shown in the examples below to select tracks.
Press to stop playback
Press to pause playback To resume playback, press the Pause [ ] or Play [ ] button.
Press:
Press to select tracks Press the Previous [ ] button to
locate the beginning of the currently playing or paused track. Press it repeatedly to select earlier tracks.
Press the Next [ ] button repeat- edly to select subsequent tracks.
On MP3 CDs, you can select les in other folders (see page 32).
Press to adjust the volume Press the VOLUME Up [ ] button to turn up the volume. Press the VOLUME Down [ ] button to turn it down.
Press to start playback Pressing this button while the CD receiver is on Standby will turn on the CD receiver and start playback.
Press to display more CD infor- mation
Track #8
Used to enter numbers over 10.
With MP3 CDs, you can select les in the current folder with these buttons.
Track #10
Track #34 Press to fast forward or fast reverse During playback or while playback is paused, press and hold the Fast For- ward [ ] button to fast forward, or the Reverse [ ] button to fast reverse.
Displaying CD Information
Lights up while the elapsed track time is being displayed.
REMAIN Lights up while the remaining track time is being displayed.
TOTAL REMAIN Lights up while the remaining disc time is being displayed. During random playback, or if the total time is more than 99 minutes and 59 seconds, : is displayed.
Note: See page 34 for details on dis- playing MP3 information.
31
32
Playing CDsContinued
On an MP3 CD, MP3 les may be organized in a hierar- chically, with folders containing les and subfolders, as shown below. On the CD receiver, there are two modes for selecting MP3 les: Navigation mode and All Folder mode. In Navigation mode, you can select MP3 les by navigating through the folder hierarchy, moving in and out of folders and subfolders. In All Folder mode, all folders appear at the same level, making it easy to select folders regardless of the hierarchy.
If you dont select a specic MP3 le or folder for play- back, all of the MP3 les on the CD will be played in numerical order starting with le #1.
Selecting MP3 Files in Navigation Mode
With Navigation mode, you can select MP3 les by nav- igating through the folder hierarchy. This mode can only be used while playback is stopped.
If random mode or 1-folder mode is currently selected, press the [YES/MODE] button to cancel it before pro- ceeding.
On the CR-515, you can also use the multi control for steps 2, 3, and 4. Turn the multi control to select les and folders, and push it for ENTER.
Selecting MP3 Files
File #11
File #1
File #10
Folder #3
File #12
Root Folder #1
Folder #2
File #13
Folder #4
File #14
File #18
/
FOLDERMENU/NO
ENTER
1 While playback is stopped, press the [FOLDER] button. The CD receiver enters Navigation mode and Root appears on the dis- play.
2 Press [ENTER]. The name of the rst folder one level down from root appears on the display.
If the disc contains no folders, the name of the rst MP3 le is displayed.
3 Use the Previous and Next [ ]/[ ] buttons to select other folders and les at the same level. Folders that dont contain MP3 les or subfolders cant be selected.
4 To access les or subfolders inside another folder, select the folder, and then press [ENTER]. Use the Previous and Next [ ]/[ ] buttons to select the les and subfolders within that folder.
To move up a level, press the [MENU/NO] button.
5 To start playback, press the [ENTER] or Play/Pause [ ] button. Playback will start with the specied le or folder and continue until all of the MP3 les on the disc have been played.
/
Playing CDsContinued
Selecting MP3 Files in All Folder Mode
With All Folder mode, you dont have to navigate the folder hierarchy because all folders that contain MP3 les appear at the same level.
If random playback is currently selected, press the [YES/MODE] button to cancel it before proceeding.
On the CR-515, you can also use the multi control for steps 2, 3, and 4. Turn the multi control to select les and folders, and push it for ENTER.
To select an MP3 le in another folder during playback, press the [FOLDER] button, select the folder by using the Previous and Next [ ]/[ ] buttons (or multi control), and then press [ENTER] (or push the multi con- trol). Now use the Previous and Next [ ]/[ ] but- tons (or multi control) to select the MP3 les within that folder.
Pausing Playback To pause playback, press the Play/Pause [ ] button. To resume playback, press it again.
Cancelling Navigation or All Folder Mode To cancel Navigation mode or All Folder mode while selecting MP3 les, press the Stop [ ] button.
Selecting MP3 Folders and Files by Number
1 Press the [FOLDER] button for 2 seconds to enter All Folder mode.
2 Use the number buttons as shown in the examples below to enter folder numbers.
If playback is stopped, playback starts with the rst MP3 le in the specied folder. If playback is already in progress, press [ENTER] to play the rst MP3 le in the specied folder.
3 Use the number buttons to enter the le number. Playback starts. If a folder contains more than 99 MP3 les, single- and double-digit le numbers must be preceded by zeros. For example, to specify le #5, press [5]. To specify le #32, press [>10], [3], and [2].
1 While playback is stopped, press the [FOLDER] button for 2 sec- onds. The CD receiver enters All Folder mode and the name of the rst folder appears on the display.
2 Use the Previous and Next [ ]/[ ] buttons to select the other folders. You can select any folder that contains MP3 les.
To play the rst le in the selected folder, go to Step 4.
3 To access the les inside the folder, press the [FOLDER] but- ton. The name of the rst MP3 le inside the folder is displayed.
Use the Previous and Next [ ]/[ ] buttons to select the MP3 les within the folder.
To select another folder, press the [FOLDER] button again, and then use the Previous and Next [ ]/[ ] buttons to select it.
/
FOLDER
ENTER
Number buttons
4 To start playback, press the [ENTER] or Play/Pause [ ] button. Playback will start with the specied le or folder and continue until all of the MP3 les on the disc have been played.
/
/
To select: Press:
Folder #8
Used to enter numbers over 10.
Folder #10
Folder #34
33
34
Playing CDsContinued
Playing the MP3 Files in Only One Folder
Normally, all of the MP3 les in all of the folders on the disc are played. With 1-folder playback, only the MP3 les in the specied folder are played.
You can display various information about the MP3 le currently playing, including ID3 tags such as title, artist name, and album name.
Elapsed time: The length of time that the current MP3 le has been playing (default display). If the elapsed time is more than 99 minutes and 59 seconds, : is displayed.
File name: Name of the current MP3 le.
Folder name: Name of the current folder.
Title name: Title of the current le (if ID3 tag present).
Artist name: Name of the artist (if ID3 tag present).
Album name: Name of the album (if ID3 tag present).
Sampling rate and bit rate: Sampling rate and bit rate of the current MP3 le.
Notes: On the CR-315, you can also use the CD receivers
[DISPLAY] button to display this information. To display the disc name, press the [DISPLAY] button
while playback is stopped. If a le or folder name contains any characters that
cannot be displayed, an underscore will be displayed in place of those characters. Alternatively, you can set the CD receiver so that names containing such charac- ters are displayed as File n or Folder n, n being the le or folder number (see page 37).
1 Press the [YES/MODE] button repeatedly until the 1FOLDER indicator appears.
2 Use the Previous and Next [ ]/[ ] buttons to select the folder. You can select any folder that contains MP3 les.
3 To start playback, press the [ENTER] or Play/Pause [ ] button. Playback will start with the rst MP3 le in the specied folder and continue until all of the MP3 les in that folder have been played.
/
DISPLAY
YES/MODE
ENTER
1FOLDER indicator
/
Displaying MP3 Information
During playback, press the [DIS- PLAY] button repeatedly to dis- play the following MP3 information.
Playing CDsContinued
With memory playback, you can create a playlist of up to 25 tracks.
Memory playback can be set only when the input source is set to CD and playback is stopped.
Selecting Other Tracks During Memory Playback To select other playlist tracks during memory playback, use the remote controllers Previous and Next [ ]/[ ] buttons.
Checking Whats on the Playlist To check what tracks are on the playlist, with playback stopped, use the Fast Reverse and Fast Forward [ ]/[ ] buttons to scroll through the playlist.
Removing Tracks from the Playlist While memory playback is stopped, press the
[CLEAR] button. Each press removes the last track from the playlist.
The playlist will be deleted when you cancel memory playback, select random playback, turn off the CD receiver, or remove the CD.
Memory Playback
1 Press the [YES/MODE] button repeatedly until the MEMORY indi- cator appears.
2 Use the Previous and Next [ ]/[ ] buttons to select the rst track you want to add to the playlist, and then press [ENTER].
Repeat this step to add additional tracks to the playlist.
You can also use the number buttons on the remote controller to select tracks.
On the CR-515, you can also use the multi control to add tracks to the playlist. Turn the multi control to select a track, and then push it for ENTER.
To select MP3 les for memory playback: In Navigation mode, use steps 14 on page 32. In All Folder mode, use steps 14 on page 33.
/ YES/MODE
MENU/NO/ CLEAR
ENTER /
Number buttons (see page 31) (These buttons do nothing during memory playback)
MEMORY indicator
Track to be added to the playlist
Total time of playlist
To remove tracks from the playlist: Press the [CLEAR] button. Each press removes the last track from the playlist.
Notes: If the total playing time is more than
99 minutes and 59 seconds, : is displayed.
You can add up to 25 tracks to the playlist. If you try to add more, the message Memory Full appears.
3 To start memory playback, press the Play [ ] button.
On the CD receiver, press the Play/Pause [ ] button to start memory play- back.
Track currently playing
/
35
36
Playing CDsContinued
With random playback, all of the tracks on the disc are played in random order.
Random playback can be set only when the input source is set to CD and playback is stopped.
Cancelling Random Playback To cancel random playback, press the [SHUFFLE]
button repeatedly until the RANDOM indicator disap- pears.
Random playback is cancelled when the CD is removed or the CD receiver is set to Standby.
With repeat playback, you can play an entire CD repeat- edly, play one track repeatedly, or combine it with mem- ory playback to play the playlist repeatedly, or random playback to play all of the tracks on the disc in random order repeatedly. With an MP3 CD, you can combine repeat playback with 1-folder playback to play all of the tracks in a specied folder repeatedly.
Repeat-1 playback cant be combined with memory playback, random playback, or 1-Folder playback.
Cancelling Repeat Playback
To cancel repeat playback, press the [REPEAT] button repeatedly until both the REPEAT and REPEAT 1 indicators disappear.
Repeat playback is cancelled when the CD is removed or the CD receiver is set to Standby.
Random Playback
1 Press the [YES/MODE/SHUFFLE] button repeatedly until the RAN- DOM indicator appears.
2 To start random playback, press the Play [ ] button.
YES/MODE/ SHUFFLE
RANDOM indicator
Track currently playing
Repeat Playback
Press the [REPEAT] button repeat- edly until the REPEAT or REPEAT 1 indicator appears.
REPEAT
REPEAT or REPEAT 1 indicator
Playing CDsContinued
With the MP3 preferences, you can change the way MP3 le information is displayed and the way MP3 CDs are played.
The MP3 preferences can be set only when playback is stopped.
To cancel the procedure at any point, press the [MENU/NO] button.
Preferences
Below, the name of each preference is followed by its options in parentheses, with the default option in bold.
Disc Name? (Display/Not Display) This preference determines whether or not the disc name is displayed when an MP3 disc is loaded.
File Name? (Scroll/Not Scroll) This preference determines whether or not the le name scrolls across the display when an MP3 le is selected.
In Navigation mode (see page 32), the le name scrolls across the display regardless of this setting.
Folder Name? (Scroll/Not Scroll) This preference determines whether or not the folder name scrolls across the display when an MP3 folder is selected (in All Folder mode).
In Navigation mode (see page 32), the folder name scrolls across the display regardless of this setting.
Bad Name? (Replace/Not Replace) This preference determines whether or not le and folder names that contain undisplayable characters are replaced with File n or Folder n, n being the le or folder number. When set to Not Replace, displayable characters are displayed and underscore characters are used in place of any undisplayable characters.
For ID3 tags, underscore characters are used in place of undisplayable characters regardless of this preference.
ID3 Ver. 1? (Read/Not Read) This preference determines whether or not version 1.0/1.1 tags are read and displayed. When set to Not Read, version 1.0/1.1 tags are not displayed.
ID3 Ver. 2? (Read/Not Read) This preference determines whether or not version 2.2/2.3/2.4 tags are read and displayed. When set to Not Read, version 2.2/2.3/2.4 ID3 tags are not displayed.
CD Extra? (Audio/MP3) This preference applies to CD Extra discs and deter- mines whether music in the audio session or MP3 les in the data session are played.
Joliet? (Use SVD/ISO9660) This preference applies to MP3 discs in Joliet format and determines whether the CD receiver reads the SVD data or treats the disc as an ISO 9660 disc. Normally, this preference doesnt need to be changed.
SVD (Supplementary Volume Descriptor) supports long le and folder names and characters other than letters and numbers. Some CD burning software refers to the Joliet format as Windows format.
Setting MP3 Preferences
1 Press the [MENU/NO] button repeatedly until Disc Name? appears.
2 Use the Previous and Next [ ]/[ ] buttons to select the preference you want to change. The preferences are explained in the next column.
3 Press [ENTER].
4 Use the Previous and Next [ ]/[ ] buttons to select the preferences options.
5 Press [ENTER]. When the preference has been set, Com- plete appears on the display.
/ MENU/NO/ CLEAR
ENTER
37
38
Playing CDsContinued
Hide Number? (Disable/Enable) This preference determines whether or not the numbers at the beginning of le and folder names are hidden.
When you create an MP3 CD on a personal computer, you cannot normally determine the playback order of the les. However, if you number the MP3 les in order, starting with 01, 02, 03, and so on, they will play in that order. If you dont want these numbers to appear on the display, choose Enable.
The following table shows a few examples of numbered le and folder names and how they will appear with the Disable and Enable options.
Folder Key? (All Folder/Navigation) This preference determines how the [FOLDER] button works. When the All Folder option is selected, pressing the [FOLDER] button once selects All Folder mode and pressing and holding it for 2 seconds selects Navigation mode. When the Navigation option is selected, pressing the [FOLDER] button once selects Navigation mode and pressing and holding it for 2 seconds selects All Folder mode.
File/folder name Trk/Fld Num Option
Disable Enable
01 Pops 01 Pops Pops
10-Rock 10-Rock Rock
16_Jazz 16_Jazz Jazz
21th Century 21th Century 21th Century
05-07-20 Album 05-07-20 Album Album
Listening to the Radio
When tuned into a station, the Tuned indicator appears. When tuned into a stereo FM station, the FM ST indicator appears as well.
Tuning into weak stereo FM stations If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono.
Adjusting the Antennas
Tuning into Radio Stations
YES/MODE
BAND
( TUN/ TUN )
/
AUTO FM ST
1 Press the [BAND] button repeat- edly to select AM or FM.
2 Press the [YES/MODE] button repeatedly to select Auto or Man- ual. Auto Tuning Mode
The AUTO indicator appears and ste- reo radio reception is possible.
Manual Tuning Mode The AUTO indicator is not displayed and radio reception will be in mono.
3 Use the Fast Reverse and Fast For- ward [ ]/[ ] buttons to tune into a station. In Auto tuning mode, once a station is found, tuning stops automatically. The American model changes FM fre- quency in 0.2 MHz steps, 10 kHz steps for AM. For other models its 0.05 MHz steps for FM and 9 kHz or 10 kHz steps for AM. In Manual Tuning mode, the frequency stops changing when you release the but- ton. Press the button repeatedly to change the frequency one step at a time.
AUTO indicator
1 2
Change the direction of the antenna to achieve the best reception.
Afx the antenna with a thumbtack. (Do not push the thumbtack through the antenna.) Caution: Be careful not to prick your nger!
Adjusting the AM antenna Adjust the location and position of the AM antenna while listening to an AM station to achieve the best reception.
Adjusting and installing the FM antenna Choose a location for the FM antenna while listening to an FM station.
39
40
Listening to the RadioContinued
With the Auto Preset function, you can automatically preset all of the FM radio stations available in your area in one go. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations. The Auto Preset function does not preset AM radio stations (see page 41).
Note: Depending on your location, a preset may be stored with no station and you will hear only noise when you select it. In this case, delete the preset (see page 46).
On the CR-515, you can also use the front panel con- trols.
1 Press the [INPUT] button repeatedly until FM appears.
2 Push the multi control, and then turn it to select AutoPreset?
3 Push the multi control. The conrmation message AutoPreset?? appears.
4 To start the Auto Preset function, push the multi con- trol.
After Storing Presets You Can:
Select them (see page 42) Name them for easy identication (see page 44) Copy them (see page 45) Erase them (see page 46)
Presetting FM Stations Automatically (Auto Preset)
1 Press the [BAND] or INPUT [ ]/[ ] buttons repeatedly until FM appears.
Make sure the FM antenna is positioned to achieve the best possible reception.
2 Press the [MENU/NO] button, and then use the Previous and Next [ ]/[ ] buttons to select AutoPreset?
3 Press [ENTER]. The conrmation message AutoPre- set?? appears.
To cancel the Auto Preset function at this point, press the [MENU/NO] button.
BAND
/
MENU/NO/ CLEAR
ENTER
INPUT /
or
4 To start the Auto Preset function, press [ENTER].
Up to 20 stations can be preset and pre- sets are stored in frequency order.
Any existing presets will be deleted when the Auto Preset function is run.
Auto Preset Caution!
Listening to the RadioContinued
With the Preset Write function, you can manually preset individual AM and FM radio stations. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations. FM stations can also be preset automatically (see page 40).
On the CR-515, you can also use the front panel con- trols.
1 Tune into the station you want to store as a preset (see page 39).
2 Push the multi control, and then turn it to select Pre- setWrite?
3 Push the multi control. 4 Turn the multi control to select a preset. 5 To store the station, push the multi control.
Note: If the current FM station supports RDS and PS (Program Service Name), the stations name will be displayed instead of the frequency. (See page 43 for more on RDS.)
After Storing Presets You Can:
Select them (see page 42) Name them for easy identication (see page 44) Copy them (see page 45) Erase them (see page 46)
Presetting AM/FM Stations Manually
/
MENU/NO/ CLEAR
ENTER
You can store up to 40 stations as presets and this can be any combination of AM and FM stations. For example, 27 FM and 13 AM or 32 FM and 8 AM.
Although AM and FM presets share the same numbers, theyre selected independently. For example, preset #1 will store an AM station when the AM band is selected, and an FM station when the FM band is selected.
Stations can be stored to presets in any order. For example, you could store preset #5 rst, #1 second, and so on.
About Presets
1 Tune into the station that you want to store as a preset.
2 Press the [MENU/NO] button, and then use the Previous and Next [ ]/[ ] buttons to select Preset Write?
3 Press [ENTER].
The preset number ashes. To cancel the Preset Write function at this point, press the [MENU/NO] button.
4 Use the Previous and Next [ ]/[ ] buttons to select a preset.
5 To store the station, press [ENTER]. If no station has yet been stored to the selected preset, Complete appears and the station is stored.
If a station has already been stored in the selected preset, the message Over- write? appears.
To overwrite the previously stored sta- tion, press the [YES/MODE] button. To not overwrite the previously stored station, press the [MENU/NO] button.
If the message Memory Full appears, all 40 presets have been stored and youll need to erase some presets before you can store any more stations (see page 46).
6 Repeat steps 1 to 5 to preset more radio stations.
41
42
Listening to the RadioContinued
You must store some presets before you can select them (see pages 40 and 41).
On the CR-515, you can also use the front panel con- trols.
1 Use the [INPUT] button to select AM or FM. 2 Turn the multi control to select a preset.
On the CR-315, you can also use the front panel con- trols. 1 Use the [INPUT] button to select AM or FM. 2 Use the Previous and Next [ ]/[ ] buttons to
select a preset.
Selecting Preset Stations
1 Use the [BAND] or INPUT [ ]/[ ] buttons to select AM or FM. The preset you selected the last time you listened to the radio will still be selected.
2 Use the Previous and Next [ ]/[ ] buttons to select a preset. Press the Previous [ ] button to select the previous preset. Press the Next [ ] button to select the next preset.
INPUT /
( PRESET/ PRESET )
BAND
/
Number buttons
or
or
You can also use the number but- tons as shown in the examples below to select presets.
To select: Press: Preset #8
Used to enter numbers over 10.
Preset #10
Preset #22
Listening to the RadioContinued
Press the remote controllers [DISPLAY] button repeatedly to display more radio information. On the CR-315, you can also use the CD receivers [DISPLAY] button to display this information.
RDS is only available on European models and only in areas where RDS broadcasts are available.
What is RDS? RDS stands for Radio Data System and is a method of transmitting data in FM radio signals. It was developed within the European Broadcasting Union (EBU) and many European FM radio stations use it these days. The CD receiver supports and displays the Program Ser- vice Name (PS) and Radio Text (RT) types of RDS data. The RDS indicator appears on the display when the CD receiver is tuned to an FM station that supports RDS.
Notes: If the signal from an RDS station is weak, RDS data
may be displayed intermittently or not at all. The message Waiting... may appear while the RT
data is being received.
Displaying Radio Information
DISPLAY
AM/FM Frequency
*Preset name * If the selected preset has no name, No Name appears
briey and then the frequency is displayed. See Nam- ing Presets on page 44.
Receiving RDS
Frequency and preset number
Preset name (if preset has no name)
Program Service Name
Radio Text (if available)
Press the [DISPLAY] button repeatedly to dis- play the following RDS information.
43
44
Listening to the RadioContinued
You can name presets for easy identication. The preset name may contain of up to eight characters.
On the CR-515, you can also use the front panel con- trols.
1 Select the preset you want to name (see page 42). 2 Push the multi control, and then turn it to select
Name In? 3 Push the multi control. 4 Turn the multi control to select a character, and then
push it. 5 Repeat step 4 to enter up to 8 characters.
Use the remote controllers [DISPLAY] button to select the character groups.
Available Characters
Naming Presets
1 Select the preset you want to name (see page 42).
2 Press the [MENU/NO] button, and then use the Previous and Next [ ]/[ ] buttons to select Name In?
3 Press [ENTER].
4 Press the [DISPLAY] button repeatedly to select one of the fol- lowing character groups: A for uppercase letters. a for lowercase letters. 1 for numbers and symbols.
5 Selecting letters: Press the number buttons repeatedly to select the available letters. For example, press the [2] button repeat- edly to select: A, B, or C.
Selecting numbers and symbols: Use the number buttons to select numbers. Press the [>10] button repeatedly to select: (space) . / * - , ! ? & ( ) Press the [0] button repeatedly to select: 0 or (space)
/ ENTER
MENU/NO
DISPLAY Number buttons
Character group
Note: Not all of the symbols can be entered by using the number buttons. Use the Previ- ous and Next [ ] or [ ] buttons to select from the full range of symbols.
When youve selected the charac- ter you want, press [ENTER], and then choose the next character. Editing characters:
To change or delete a character youve already entered, use the Rewind and Fast Forward [ ]/[ ] buttons to select it, and then select another character, or press the [CLEAR] button to delete it.
Inserting a new character: To insert a new character, use the Rewind and Fast Forward [ ]/[ ] buttons to select the character imme- diately after the insertion point. That character ashes. Use the Previous and Next [ ] or [ ] buttons to select , press [ENTER], and then select the new character.
To cancel the Name In function, press the [MENU/NO] button for 2 seconds.
6 When youve nished entering the name, press the [YES/MODE] but- ton. The preset is named and Complete appears on the display.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9 _ @ ' < > # $ % & * = ; : + - / ( ) ? ! , . (space) (insert)
Listening to the RadioContinued
With the Preset Copy function, you can organize your presets in the order you want. When you copy a preset, its name is also copied.
On the CR-515, you can also use the front panel con- trols.
1 Select the preset you want to copy (see page 42). 2 Push the multi control, and then turn it to select Pre-
setCopy? 3 Push the multi control. 4 Turn the multi control to select the destination pre-
set. 5 To copy the preset, push the multi control.
Tip: If you favorite station is stored in preset #5 and you want to make it preset #1, copy preset #5 to preset #1. To keep the station thats already stored in preset #1, you may want to copy it to an unused preset rst.
Copying Presets
1 Select the preset you want to copy (see page 42).
2 Press the [MENU/NO] button, and then use the Previous and Next [ ]/[ ] buttons to select Pre- setCopy?
3 Press [ENTER].
The number of the preset to be copied ashes.
4 Use the Previous and Next [ ]/[ ] buttons to select the destination preset.
The number of the destination preset ashes.
/
MENU/NO/ CLEAR
ENTER
5 To copy the preset, press [ENTER]. If no station has yet been stored in the destination preset, the station is copied and Complete appears.
If a station has already been stored in the destination preset, the message Over- write? appears.
To overwrite the previously stored sta- tion, press [ENTER]. To not overwrite the previously stored station, press the [MENU/NO] button.
45
46
Listening to the RadioContinued
On the CR-515, you can also use the front panel con- trols.
1 Select the preset whose name you want to erase (see page 42).
2 Push the multi control, and then turn it to select NameErase?
3 To erase the presets name, push the multi control.
On the CR-515, you can also use the front panel con- trols.
1 Select the preset you want to erase (see page 42). 2 Push the multi control, and then turn the multi con-
trol to select PresetErase? 3 Push the multi control. The conrmation message
Erase OK? appears. 4 To erase the preset, push the multi control.
Erasing a Presets Name
1 Select the preset whose name you want to erase (see page 42).
2 Press the [MENU/NO] button, and then use the Previous and Next [ ]/[ ] buttons to select NameErase?
3 To erase the presets name, press the [YES/MODE] button. The presets name is erased and Com- plete appears on the display.
Erasing Presets
1 Select the preset you want to erase (see page 42).
2 Press the [MENU/NO] button, and then use the Previous and Next [ ]/[ ] buttons to select PresetErase?
3 Press [ENTER]. A message requesting conrmation appears.
To cancel the Preset Erase function at this point, press the [MENU/NO] button.
4 To erase the preset, press [ENTER]. The preset is erased and Complete appears on the display.
/
MENU/NO/ CLEAR
ENTER
Setting the Clock
The AccuClock function normally uses the FM station with the strongest signal to set the clock. However, if the clock cannot be set properly using that station, you can specify which FM station the AccuClock function should use. This must be an FM station that supports RDS CT (Clock Time) information.
Setting AccuClock to Use a Specic Station (European Model Only)
1 Press the [TIMER] button. Clock appears on the display. If the clock has already been set, a timer option appears instead, in which case youll need to press the [TIMER] button repeatedly until Clock appears.
2 Press [ENTER]. AccuClockor *AccuClock* appears on the display. If Manual Adjust appears, use the Pre- vious and Next [ ]/[ ] buttons to select AccuClock or *AccuClock*.
3 Press [ENTER]. The frequency ashes on the display.
4 Use the Rewind and Fast Forward [ ]/[ ] buttons to tune into the FM station. Tip: If you press the [YES/MODE] button instead of using the Rewind and Fast For- ward [ ]/[ ] buttons, the CD receiver will automatically search for a suitable station. The RDS indicator appears when tuned into a station that supports RDS. The RDS indicator will ash while the CD receiver searches for a station and light up continuously when a station is found.
RDS indicator
5 When youve selected the station, press [ENTER]. While the clock is being set, Wait ashes on the display. It may take a few minutes to set the clock. When the clock has been set, the message Clock Adjusted scrolls across the display, then the day and time are displayed for a while.
Notes: If the clock is not set correctly, specify
another FM station and try again or set the clock manually (see page 48).
The AccuClock function automati- cally updates the clock every day. If you dont want it to, you can turn off the AccuClock function (see page 26).
47
48
Setting the ClockContinued
The time can be displayed in either 12- or 24-hour for- mat.
Displaying the Day and Time
To display the day and time, press the remote controllers [CLOCK CALL] button. If the CD receiver is on Standby, the time is displayed for 8 seconds.
Using the 12- or 24-hour Format
To change the time format between 12-hour and 24-hour, while the time is shown on the display, press the [DIS- PLAY] button.
Displaying the Time in Standby Mode
To set the CD receiver so that the time is displayed while its on Standby, turn on the CD receiver, and then press and hold its [STANDBY/ON] button for 2 seconds. Note that having the time displayed in Standby mode will consume a little more power.
Setting the Clock Manually
1 Press the [TIMER] button repeat- edly until Clock appears.
2 Press [ENTER].
3 Use the Previous and Next [ ]/ [ ] buttons to select Manual Adjust..
4 Press [ENTER].
5 Use the Previous and Next [ ]/ [ ] buttons to select the day of the week. You can select: SUN, MON, TUE, WED, THU, FRI, or SAT.
6 Press [ENTER].
To cancel the Manual Adjust function at this point, press the [MENU/NO] button.
/
TIMER
STANDBY/ON
ENTER
DISPLAY
MENU/NO/ CLEAR
CLOCK CALL
Number button
7 Use the Previous and Next [ ]/ [ ] buttons to set the time. You can also use the remote controllers number buttons to enter the time.
For the 12-hour format, use the remote controllers [>10]button to select AM or PM.
8 Press [ENTER].
The clock is set and the second dot starts ashing.
Using the Timers
The CD receiver has ve timers: four programmable tim- ers for automated playback or recording, and a sleep timer for turning the CD receiver off after a specied period. The timers can be used with other Onkyo components that are connected to the CD receiver via (see pages 20 to 24 for hookup details).
The various settings for the four programmable timers are explained here. For details on the sleep timer, see page 53.
Timer Types
Each timer can be programmed for playback (Play) or recording (Rec).
Play Play mode can be used to start playback at a specied time on the CD receiver or another Onkyo component thats connected to the CD receiver with an cable. You could use a Play timer to turn on the CD receiver every morning, just like a radio alarm.
Rec Rec mode can be used to start playback on one compo- nent and start recording on another component at a spec- ied time. The recording component (e.g., Onkyo cassette deck or MD recorder) must be connected to the CD receiver with an cable. You could use a Rec timer to record your favorite radio show every day.
Playback and Recording Components
The playback component can be the CD receiver (AM, FM, or CD), an Onkyo component (MD recorder, cas- sette deck, etc) thats connected to the CD receiver with an cable, or a component thats connected to one of the CD receivers inputs, perhaps one with its own built- in timer. The recording component can be an Onkyo MD recorder or cassette deck thats connected to the CD receiver with an cable.
Repeat Timers
Each timer can be programmed to work just once (Once), every week (Every), every day (Every Day), or on a range of days (Days Set).
Once The timer will work just once.
Every The timer will work every week on the specied day and time.
Everyday The timer will work every day.
Days Set The timer will work on the specied range of days. With this setting, you could set up a morning alarm for Mon- day to Friday.
Timer Examples
The following examples highlight some of the ways in which you can use the timers.
Timer 1: To wake up to your favorite radio station (pre- set #1) every morning, set as follows: PlayFM 1EveryEvery DayOn 7:00Off 7:30 If you want a radio alarm only on weekdays, select Days Set instead of Every Day and specify MONFRI.
Timer 2: To record a one-off radio show (preset #2) to a cassette deck this Sunday, set as follows: RecFM 2TAPEOnceSUNOn 21:00Off 22:00 (You need an -capable Onkyo cassette recorder or MD recorder to do the recording.)
Timer 3: To record an FM radio show to a MiniDisc recorder every day from Monday to Friday, set as fol- lows: RecFM 1MDEveryDays SetMON FRIOn 15:00Off 15:30
Timer Priority
If two or more timers are set to the same On time, the lowest numbered timer has priority. For example:
Timer 1: 07:00 13:00 (This timer has priority.) Timer 2: 07:00 12:30
If two or more timers overlap, the timer with the earliest start time has priority. For example:
Timer 1: 9:00 10:00 Timer 2: 8:00 10:00 (This timer has priority.)
If the On and Off times of two timers are the same, the timer with the earliest start time has priority and the other timer will fail. For example:
Timer 1: 0:00 1:00 (This timer has priority.) Timer 2: 1:00 2:00
Timer Indicators
When a timer has been set, the TIMER indica- tor and the number of the timer appear on the display. If the timer has been set to perform recording, an underscore character appears underneath the timers number.
Notes: The timers work only if the CD receiver is on Standby.
If its on when a timer is supposed to start playback or recording, nothing will happen.
While timed playback or recording is in progress, the timers Off time cannot be changed.
To use timed playback or recording with an external component, make sure its properly connected to the CD receiver. Also, for to work properly, make sure that the Input Display on the CD receiver is set to match the type of component youve connected to the MD/TAPE IN, DOCK/CDR IN, or DIGITAL IN (see page 29).
About the Timers
49
50
Using the TimersContinued
Notes: You must set the clock before you can program the
timers. Before programming a timer to turn on the radio, you
must preset the station you want to use. (See pages 40 and 41.)
If you dont operate any buttons for 60 seconds while programming a timer, the procedure will be cancelled and the previous display will reappear.
Programming the Timers
1 Press the [TIMER] button repeat- edly to select timer 1, 2, 3, or 4, and then press [ENTER].
If Clock appears, you need to set the clock (see pages 26, 47, 48).
2 Use the Previous and Next [ ]/ [ ] buttons to select Play or Rec, and then press [ENTER].
If you cant select Rec, make sure that your Onkyo cassette deck or MD recorder is properly connected to the MD/TAPE jacks (see pages 20 and 21) and the Input Display is set accordingly (see page 29).
/ TIMER
STANDBY/ON
ENTER
Number buttons
or
3 Use the Previous and Next [ ]/ [ ] buttons to select the source, and then press [ENTER].
You can select the following sources:
CR-515 FM, AM, TAPE, DOCK, LINE1, LINE2, DIGITAL, or CD.
CR-315 FM, AM, TAPE, DOCK, LINE, or CD.
If you selected Rec, CD cannot be selected as the source.
4 If you selected AM or FM, use the Previous and Next [ ]/[ ] but- tons to select the radio preset, and then press [ENTER].
5 If you selected Rec, make sure the name of the connected recorder is ashing on the display, and then press [ENTER].
You can select TAPE or MD.
6 Use the Previous and Next [ ]/ [ ] buttons to select Once or Every, and then press [ENTER]. Select Once for on-off operation. Select Every to perform the same operation every week.
Using the TimersContinued
To return to step 1 and start timer programming all over again, press the [MENU/NO] button at any point in this procedure.
7 If you selected Once, use the Pre- vious and Next [ ]/[ ] but- tons to select the day, and then press [ENTER]. You can select: SUN, MON, TUE, WED, THU, FRI, or SAT.
8 If you selected Every, use the Pre- vious and Next [ ]/[ ] but- tons to select the day, Everyday, or Days Set, and then press [ENTER]. You can select the following:
9 If you selected Days Set, use the Previous and Next [ ]/[ ] but- tons to select the rst day, and then press [ENTER].
Use the Previous and Next [ ]/ [ ] buttons again to select the last day, and then press [ENTER].
You can select only consecutive days.
10 Use the Previous and Next [ ]/ [ ] buttons to specify the On time, and then press [ENTER].
You can also use the remote controllers number buttons to enter the time. For example, to enter 7:29, press [>10], [0], [7], [2], and [9].
Notes: Once the On time is set, the Off time is
automatically set to one hour later. To ensure that the rst few seconds of
a program are recorded when using timer recording, set the On time slightly ahead of the programs start time (about 1 minute).
SUN
TUEMON
Days Set Everyday
WED THU
SAT
FRI
11 Use the Previous and Next [ ]/ [ ] buttons to specify the Off time, and then press [ENTER].
12 Use the Previous and Next [ ]/ [ ] buttons to specify the CD receivers volume level, and then press [ENTER].
The default setting is 10. If you want to use your normal volume level setting for the timer, press the Pre- vious [ ] button repeatedly until TimerVol.Off appears on the display. In this case, the timer will use the volume level that was set before the CD receiver was set to Standby.
13 Press the [STANDBY/ON] button to set the CD receiver to Standby.
Notes: Be sure to set the CD receiver to
Standby, otherwise the timed opera- tion will not work.
While a timed operation is in progress, you can cancel it by pressing the [TIMER] or [SLEEP] button.
While timed recording is in progress, the output of the CD receiver is muted. To hear whats being recorded, press the [MUTING] button. Press it again to mute the CD receiver.
Memory, random, and 1-Folder play- back cannot be used with the timers.
TIMER indicator
Number of programmed timer
Underscore indicates timer programmed for recording
51
52
Using the TimersContinued
Once a timer has been programmed, you can turn it on or off as necessary. For example, while youre on holiday, you may want to turn off the timer you use as an early- morning alarm.
Turning Timers On and Off
1 Press the [TIMER] button repeat- edly to select timer 1, 2, 3, or 4.
When a timer has been programmed, its number appears on the display.
2 Use the Previous and Next [ ]/ [ ] buttons to select Timer On or Timer Off.
After a few moments, the previous dis- play reappears.
/
TIMER
ENTER
MENU/NO/ CLEAR
or
Checking Timer Settings
1 Press the [TIMER] button repeat- edly to select timer 1, 2, 3, or 4, and then press [ENTER].
2 Press [ENTER] repeatedly to see all of the timers settings.
Notes: You can change the settings by using
the Previous and Next [ ]/[ ] buttons.
If you change the settings of a timer that is off, that timer will be turned on.
If you dont change any settings, the pre- vious display reappears. To return to the previous display at any point in this procedure, press the [MENU/NO] button.
Using the TimersContinued
With the sleep timer, you can set the CD receiver so that it automatically turns off after a specied period.
Checking the Remaining Sleep Time
To check the remaining sleep time, press the [SLEEP] button. Note that if you press the [SLEEP] button while the sleep time is being displayed, youll shorten the sleep time by 10 minutes.
Canceling the Sleep Timer
To cancel the sleep timer, press the [SLEEP] button repeatedly until the SLEEP indicator disappears.
Using the Sleep Timer
Press the [SLEEP] button repeat- edly to select the required sleep time. With the [SLEEP] button, you can set the sleep time from 90 to 10 minutes in 10 minute increments. Use the Previous and Next [ ]/[ ] buttons to set the sleep time in 1 minute increments from 99 to 1.
When the sleep timer has been set, the SLEEP indicator appears on the display, as shown. The sleep time appears on the display for about 8 seconds, then the pre- vious display reappears.
Note: The sleep timer will be ignored while dubbing a CD to an Onkyo cassette deck or MD recorder is in progress. The CD receiver will automatically switch to Standby when the dubbing is complete.
SLEEP
SLEEP indicator
53
54
Troubleshooting
If you have any trouble using the CD receiver, look for a solution in this section.
Cant turn on the CD receiver.
Make sure that the power cord is properly plugged into the wall outlet (see page 25). Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug it in again.
The CD receiver turns off unexpectedly.
If the sleep timer has been set and the TIMER indicator is shown on the display, the CD receiver will turn off auto- matically after a specied period.
When timed playback or recording nishes, the CD receiver automatically switches to Standby mode. If the STANDBY indicator is ashing, the built-in amplier protection circuit has been activated. This can happen if
theres a short between the positive and negative wires of a speaker cable.
Theres no sound.
Make sure the CD receivers volume control is not set to minimum (see page 27). Make sure the correct input source is selected (see page 27). Make sure the CD receiver is not muted (see page 28). Make sure the speakers are connected correctly (see page 18). Check all connections and correct as necessary (see pages 16 to 25). While headphones are connected, the speakers output no sound (see page 27).
The sound quality is not good.
Make sure the speaker cables are connected with the correct polarity (see page 18). Make sure all audio connecting plugs are pushed in all the way (see page 19). The sound quality can be affected by strong magnetic elds, such as that from a TV. Try moving any such devices
away from the CD receiver. If you have any devices that emit high-intensity radio waves near the CD receiver, such as a cellular phone thats being
used to make a call, the CD receiver may output noise. The CD receivers precision drive mechanism may emit a faint hissing sound while reading discs during playback or
when searching for tracks. You may be able to hear this noise in extremely quiet environments.
Audio output is intermittent when the CD receiver is subjected to vibration.
The CD receiver is not a portable device. Use it in a location thats not subject to shock or vibration.
Headphone output is intermittent or theres no sound.
This may be due to dirty contacts. Clean the headphones plug. See your headphones instruction manual for cleaning information. Also, make sure that the headphones cable is not broken or damaged.
Audio performance
Audio performance will be at its best about 10 to 30 minutes after the CD receiver has been turned on and had time to warm up.
Using cable ties to bundle audio cables with speaker or power cables may degrade the sound quality, so dont do it.
Playback jumps.
The CD receiver is being subjected to vibration or the disc is scratched or dirty (see page 15).
If you cant resolve the issue yourself, try resetting the CD receiver before contacting your Onkyo dealer. To reset the CD receiver to its factory defaults, turn it on and, while holding down the [ ] button, press the [STANDBY/ON] button. Clear will appear on the display and the CD receiver will enter Standby mode. Note that resetting the CD receiver will delete your radio presets and custom settings.
Power
Audio
CD Playback
TroubleshootingContinued
Cant add tracks to the playlist for memory playback.
Make sure theres a disc in the CD receiver. Also, you can only add valid track numbers. For example, if the CD contains 11 tracks, you cannot add track #12.
The disc will not play.
Make sure the disc has been loaded correctly, with the label-side facing up. Check to see if the surface of the disc is dirty (see page 15). If condensation is suspected, turn on the CD receiver and leave it for 1 hour before playing any discs. Some CD-R/RW discs may not be playable (see page 14).
It takes a long time for playback to start.
It may take the CD receiver a while to read CDs that contain many tracks or les.
Reception is noisy, stereo FM reception suffers from hiss, the Auto Preset function doesnt preset all stations, or the ST indicator doesnt light up when tuned to a stereo FM station.
Check the antenna connections (see page 16). Change the position of the antenna (see page 39). Move the CD receiver away from a nearby TV or computer. Cars or airplanes can cause noisy interference. The radio signal will be weakened if it has to pass through a concrete wall before reaching the antenna. Try setting FM mode to mono (see page 39). Move power cords and speaker cables as far away as possible from the tuners antenna. When listening to an AM station, noise may be heard when you operate the remote controller. If none of the above improves the reception, install an outdoor antenna (see page 17).
If a power outage occurs or the power cable is disconnected:
If the preset stations are lost, preset them again (see pages 40, 41). The clock and timer settings will be lost. Set the clock and timers again (see pages 47, 48).
Cant adjust the frequency of the radio.
Use the Fast Reverse and Fast Forward [ ]/[ ] buttons to change the frequency of the radio (see page 39).
RDS doesnt work.
The FM station you are tuned to doesnt support RDS. Install an outdoor FM antenna (see page 17). Change the position or direction of your outdoor FM antenna (see pages 17, 39). Move the FM antenna as far away as possible from uorescent lights (see page 39).
The remote controller doesnt work properly.
Make sure the batteries have been installed with the correct polarity (+/) (see page 5). Replace both batteries with new ones. (Do not mix different types of batteries or new and old batteries.) The remote controller is too far away from the CD receiver, or theres an obstacle between them (see page 5). The CD receivers remote control sensor is being subjected to bright light (inverter-type uorescent light or sunlight). The CD receiver is located behind the glass doors of a audio rack or cabinet.
Interactive control with other Onkyo -capable components is not working.
Make sure the cables and analog audio cables are connected correctly (see pages 19 to 25). Connecting only an cable wont work.
Make sure the Input Display matches the type of device that youve connected to the CD receiver (see page 29). When recording an MP3 CD to an Onkyo recording component, recording will start without performing a peak search
when the [CD DUBBING] button is pressed on the recording component. This is not a malfunction.
Tuner
Remote Controller
External Components
55
56
TroubleshootingContinued
No sound is heard from a connected component.
Make sure the optical digital audio cable is not bent or damaged. On the external component, set the digital output format to PCM, as the CD receiver supports only PCM signals.
No sound is heard from your turntable.
Make sure the turntable has a built-in phono equalizer. If the turntable doesnt have a phono equalizer built-in, you must provide one.
Timer playback or recording doesnt work.
Make sure the clock has been set correctly (see page 47). Timed operation will fail if the CD receiver is on at the specied On time, so make sure its set to Standby (see
page 51). The timer may overlap with another timer. If you program several timers, make sure they dont overlap (see page 49). If you press the [SLEEP] or [TIMER] button while a timed operation is in progress, the timer will be cancelled. Make sure the cables and analog audio cables are connected correctly (see pages 19 to 25). If youre using an Onkyo component for timed playback or recording, you must set the Input Display to match that
component (see page 29).
The time is not displayed in Standby mode.
Set the CD receiver so that the time is displayed in Standby mode (see page 48).
Timers
Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the units malfunction. Before you record important data, make sure that the material will be recorded correctly.
The CD receiver contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this should happen, unplug the power cord, wait at least 5 seconds, and then plug it again.
Specications
Specications and features are subject to change without notice.
General CR-515 CR-315 Power Supply: AC 230 V, 50 Hz AC 220230 V, 50/60 Hz AC 120 V, 60 Hz Power Consumption: 56 W North American: 60 W Others: 56 W Stand-by Power Consumption: 0.25 W North American: 0.15 W Others: 0.25 W Dimensions (W H D): 205 116 353 mm (8-1/16" 4-9/16" 13-7/8") 205 116 352.5 mm (8-1/16" 4-9/16" 13-7/8") Weight: 4.3 kg (9.5 lbs.) 4.2 kg (9.3 lbs.)
Audio Inputs Digital Inputs: 1 (optical) 0 Analog Inputs: 4 (LINE1, LINE2, DOCK, TAPE) 3 (LINE, DOCK, TAPE)
Audio Outputs Analog Outputs: 2 (DOCK, TAPE) 1 (TAPE) Subwoofer Pre Outputs: 1 1 Speaker Outputs: 2 2 Phones: 1 1
Amplier Section CR-515 CR-315 Power Output: European: 2ch 20 W (4, 1 kHz, 2ch driven,
IEC) Asian: 19 W + 19 W (8, 1 kHz, JEITA)
26 W + 26 W (4, 1 kHz, JEITA)
North American: 14 W + 14 W (8, 1 kHz, FTC) 19 W + 19 W (4, 1 kHz, FTC)
European: 2ch 19 W (4, 1 kHz, 2ch driven, IEC)
Asian: 18 W + 18 W (8, 1 kHz, JEITA) 25 W + 25 W (4, 1 kHz, JEITA)
Dynamic Power: 22 W + 22 W (3, Front) 20 W + 20 W (4, Front) 14 W + 14 W (8, Front)
22 W + 22 W (3, Front) 20 W + 20 W (4, Front) 14 W + 14 W (8, Front)
THD (Total Harmonic Distortion): 0.4% (1 kHz, 1 W) 0.9% (Power Rated) 0.4% (1 kHz, 1 W) Damping Factor: 25 (Front, 1 kHz, 8 ) 25 (Front, 1 kHz, 8 ) Input Sensitivity and Impedance: 150 mV/50 k (TAPE) 150 mV/50 k (TAPE) Output Level and Impedance: 150 mV/2.2 (REC OUT) 150 mV/2.2 (REC OUT) Frequency Response: 10 Hz100 kHz/3 dB (TAPE) 10 Hz100 kHz/3 dB (TAPE) Tone Control: 6 dB, 80 Hz (BASS)
8 dB, 10 kHz (TREBLE) +7 dB, 80 Hz (S.BASS)
6 dB, 80 Hz (BASS) 8 dB, 10 kHz (TREBLE) +7 dB, 80 Hz (S.BASS)
Signal to Noise Ratio: 100 dB (LINE, IHF-A) 100 dB (LINE, IHF-A) Speaker Impedance: 4 16 4 16
Tuner Section CR-515 CR-315
FM Tuning Frequency Range: 87.5 MHz108.0 MHz North American: 87.5 MHz107.9 MHz
Others: 87.5 MHz108.0 MHz Usable Sensitivity: Stereo: 22.2 dBf (IHF) Mono: 15.2 dBf (IHF) Stereo: 22.2 dBf (IHF) Mono: 15.2 dBf (IHF) Signal to Noise Ratio: Stereo: 67 dB (IHF-A) Mono: 73 dB (IHF-A) Stereo: 67 dB (IHF-A) Mono: 73 dB (IHF-A) THD (Total Harmonic Distortion): Stereo: 0.5% (1 kHz) Mono: 0.3% (1 kHz) Stereo: 0.5% (1 kHz) Mono: 0.3% (1 kHz) Stereo Separation: 40 dB (1 kHz) 40 dB (1 kHz)
AM Tuning Frequency Range: 522 kHz1611 kHz North American: 530 kHz1710 kHz
Others: 522 kHz1611 kHz Usable Sensitivity: 300 dBf (30 V) 300 dBf (30 V) Signal to Noise Ratio: 40 dB 40 dB THD (Total Harmonic Distortion): 0.7% 0.7%
CD CR-515 CR-315 Frequency Response: 4 Hz20 kHz 10 Hz20 kHz Audio Dynamic Range: 96 dB 95 dB THD (Total Harmonic Distortion): 0.005% 0.009% Wow and Flutter: Below threshold of measurability Below threshold of measurability Audio Output/Impedance (Analog): 1.3 V/1.0 k 1.3 V/1.0 k
57
58
Memo
Memo
59
60 SN 2
-2
(C) C
m/
9344258A
I0609
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8124
ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/
ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/
ONKYO EUROPE UK Office Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQ UNITED KINGDOM Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452
ONKYO CHINA LIMITED Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung, N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/
opyright 2006 ONKYO CORPORATION Japan. All rights reserved.
http://www.onkyo.co HOMEPAGE
Related manuals for Onkyo CR 515, CR 315 Instruction Manual
ar
de
en
fr
it
ja
ko
ru
sv
sp
zh
nl
ar
de
en
fr
it
ja
ko
ru
sv
sp
zh
nl
de
en
fr
it
sp
en
en
de
en
fr
it
sp
en
zh
en
Manualsnet FAQs
If you want to find out how the CR 515 Onkyo works, you can view and download the Onkyo CR 515, CR 315 Instruction Manual on the Manualsnet website.
Yes, we have the Instruction Manual for Onkyo CR 515 as well as other Onkyo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Instruction Manual should include all the details that are needed to use a Onkyo CR 515. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Onkyo CR 515, CR 315 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Onkyo CR 515, CR 315 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Onkyo CR 515, CR 315 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Onkyo CR 515, CR 315 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Onkyo CR 515, CR 315 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.