Onkyo PR SC5530 Basic Manual PDF

1 of 26
1 of 26

Summary of Content for Onkyo PR SC5530 Basic Manual PDF

PR-SC5530 AV CONTROLLER

Basic Manual

Advanced Manual found here

http://www.onkyo.com/manual/prsc5530/adv/en.html En

Before Start

2

About the Basic Manual This unit works as an AV controller when connected with a separately sold multichannel power amplifier. The Basic Manual leads you through the initial procedure to enjoy various sources with the AV controller, describing how to make settings and connections, and how to use popular functions. Besides, there is another part of the manual called Advanced Manual to inform you with more detailed information, which we have decided to publish on the web from the ecological point of view.

Advanced Manual Advanced Manual is always updated with the latest information and its user friendly interface, which does not matter whether you access from PC or Smartphone, helps you to understand more deeply about this unit. Advanced Manual is consisted of the following chapters.

Details on AM/FM reception Playing Music Files on a USB Storage Device Listening to Internet Radio Playing Music with DLNA Playing Music Files in a Shared Folder Operating Music Files with the Remote Controller Listening Mode Advanced Settings Operating Other Components with the Remote Controller Advanced Connection Connecting and Operating Onkyo RI Components Control function between the unit and external component Firmware Update Troubleshooting Reference Information

Advanced Manual found here http://www.onkyo.com/manual/prsc5530/adv/en.html

Features Supports playback in Dolby Atmos format which provides 360-degree placement and movement of sounds including overhead sound Dolby Surround listening mode expands 2 ch, 5.1 ch or 7.1 ch source to available speaker configurations THX Ultra2 Plus certified Incorporates Qdeo technology for HDMI video upscaling All HDMI jacks support displays of 4K resolution at 60 Hz Supports the HDMI Through function which allows transmission from playback devices to the TV in standby state Supports HDCP2.2, a strict copy-protection for providing high quality content (HDMI IN3/OUT MAIN only) Supports ARC (Audio Return Channel) Supports USB storage playback Supports variety of network functions such as Internet Radio, DLNA, etc. Supports Wi-Fi, Bluetooth and MHL-enabled mobile device Bi-Amping capability A/V Sync Function to correct deviation of audio and video Multi-zone function which allows you to play a different source in another room from the main room (Video can also be played in Zone 2) 32 bit DSP (Digital Signal Processor) with excellent calculation performance Music Optimizer for Compressed Digital Music files Phase Matching Bass System Automatic speaker setup available using supplied calibrated microphone (AccuEQ Room Calibration) Supports playback of MP3, FLAC, WAV, Ogg Vorbis, Apple Lossless, DSD via network and USB storage device (the supported formats will differ depending on the use environment) ISF (Imaging Science Foundation) Video Calibration XLR balanced jack (11.2 channel output, stereo input) minimizing noises in long distance transmission

Supplied Accessories

Indoor FM antenna --- (1)

AM loop antenna --- (1)

Remote controller (RC-884M) --- (1) Batteries (AA/R6) --- (2)

Power cord --- (1)

Speaker setup microphone --- (1)

The number in parenthesis indicates the quantity. On packaging, the letter at the end of the product name indicates the color.

How to use the remote controller

Batteries (AA/R6)

Remote control sensor

About 16 ft (5 m)

The unit

If you do not use the remote controller for a long time, remove the batteries to prevent leakage. Note that keeping consumed batteries inside may cause corrosion resulting in damage of the remote controller.

Step 1: Connections

3

1 Connecting the TV and players

Important: The power cord must be connected only after all other connections are completed.

HDMI cable connection

The unit has many HDMI jacks on its rear panel and each of them corresponds to an input selector button of the same name on the front panel. For example, a Blu-ray Disc player will be connected to the IN 1 jack and the BD/DVD button on the front panel will be used to listen to the playback sound (if the player is CEC compliant, input will be switched automatically). If you add another Blu-ray Disc player, you can use any other jack than IN 1. It is possible to change assignment of the input jacks and input selector buttons.

For how to make settings, see the Advanced Manual.

To connect the TV and the unit, connect the HDMI OUT MAIN jack of the unit and the HDMI IN jack of the TV using an HDMI cable. With this connection, it becomes possible to display the setting screen of the unit on the TV or transmit video/audio signals from the player to the TV. On an ARC (Audio Return Channel) compatible TV, simply making this connection enables transmission of TV sound to a power amplifier connected with this unit. If your TV does not support ARC, you need, in addition to the HDMI OUT MAIN jack connection, a digital optical cable connection between the digital audio out optical jack of the TV and the DIGITAL IN OPTICAL jack of the unit or an analog audio cable connection between the audio output jack of the TV and the TV/CD analog audio input jack of the unit.

PUSHPUSH

DIGITAL OPTICAL OUT

AUDIO OUT

TV

Audio connection with a TV not supporting ARC

Select an appropriate connection for your TV.

Another TV can be connected to the HDMI OUT SUB jack. In this case, press MONITOR OUT on the main unit several times to display "SUB" or "MAIN+SUB" and select the output method. You can also enjoy using Zone function with the HDMI OUT ZONE 2 jack. For details, see

To use the ARC function, connect to the ARC compatible HDMI jack of the TV and make an appropriate setting on the unit. See "2nd Step : Source Connection" of "Step 2: Setting Up".

HDMI OUT

HDMI OUT

HDMI OUT

HDMI OUT

HDMI OUT

HDMI IN

Personal computer

HDMI cable

Blu-ray Disc/DVD player

TV

Set-top box/Digital video recorder, etc.

Satellite/Cable set-top box, etc.

Game console

4

Step 1: Connections

the section 6 "Using the multi-zone function" of "Step 3: Playing Back".

The unit supports the HDMI Through function that allows transmission from players to the TV even if the unit is in standby. You have to modify the settings to enable the input selection link with CEC compliant device, connection with ARC compatible TV, and HDMI Through function. See the section 2 "2nd Step : Source Connection" of "Step 2: Setting Up".

To enjoy HDCP2.2 protected video, connect the player to the IN3 jack and the TV to the HDMI OUT MAIN jack of the unit. Your player and TV need to support HDCP2.2. To play 4K or 1080p video, use the high speed HDMI cable. It is possible to send video and audio of an MHL-enabled mobile device by connecting the MHL-enabled mobile device to the AUX INPUT HDMI/MHL jacks on the front panel.

Connecting Components without HDMI

If your AV component does not have HDMI jack, use an available jack of your component for cable connection with this unit. Just as the HDMI jacks, other jacks on this unit have a preassigned input selector button on the front panel. See the name of the input selector button shown with the jack when connecting the device.

PUSHPUSH

1

4

6

23

5 7

Audio signal connection

1 Digital connection: Use a digital optical cable (OPTICAL) or digital coaxial cable (COAXIAL) for connection with a player.

Digital optical cable (OPTICAL) As the digital in optical jack of the unit has a cover, push in the cable against the cover as it is turned inside.

Digital coaxial cable (COAXIAL)

2 Analog connection: Use an analog audio cable for connection with a player. To enjoy multi-zone playback of audio of a CD player or such other player without HDMI output jack, you need to use the analog audio cable to connect the corresponding jacks of the player and this unit. For details on the multi-zone function, see the section 6 "Using the multi-zone function" of "Step 3: Playing Back".

Analog audio (RCA) cable

3 Balanced connection: Use an XLR balanced cable for connection with a player. An XLR balanced cable, which is less affected by noise when extended over a long distance, is suitable for long-distance transmission.

Refer to the position indication for connection beside the BALANCE INPUT jack. You have to make an appropriate setting to play audio of the device connected to this jack. For more information, see the Advanced Manual.

XLR balanced cable

4 Connection with turntable: If it uses an MM type cartridge and does not have a built-in audio equalizer, connect it to the 4 PHONO jack. If the connected turntable has a built-in audio equalizer, connect it to the 2 TV/CD jack.

If it uses an MC type cartridge, install an audio equalizer compatible with MC type cartridge between the unit and the turntable by connecting it to the 2 TV/CD jack. For details, refer to the turntable's instruction manual. If the turntable has a ground wire, connect it to the GND terminal of this unit. If connecting the ground wire increases noise, disconnect it.

Video signal connection

The unit has a video upconversion function. For details, see the next section.

5 Use a component video cable to connect a TV with component video input jacks and a player with component video output jacks.

Component video cable Its transmitted video has higher quality than that of composite video cable.

6 Use a composite video cable to connect a TV with composite video input jack or a player with composite video output jack.

Composite video cable

7 Use an analog RGB cable to connect the unit with a PC.

Analog RGB cable

Video signals from the PC connected with the PC IN port will be output only to a TV connected with the HDMI OUT MAIN/SUB/ ZONE2 jack.

Video signals input to the composite video input jack, the COMPONENT VIDEO input jack, or the PC IN port will be upconverted to HDMI signals and then output from the HDMI output jack. Note that it is not possible to convert digital audio input signals to analog or vice versa.

AV Controller

If multiple video signal inputs are put into one input system, the output will be made in the order of HDMI, component video, and composite video.

Step 1: Connections

5

2 Connecting speakers

Speaker layout

#

$

%

&'

7

8

9

G

H

I

J

F

"

To enjoy the Dolby Atmos listening mode, Height 1 speakers, Surround back speakers or Wide speakers need to be installed.

" # Front speakers $ Center speaker % & Surround speakers ' Subwoofer 7 8 Surround back speakers 9 F Height 1 speakers (Front High) G H Height 2 speakers (Rear High) I J Wide speakers

GH and IJ share the same speaker terminals. Select either of the groups. To use the multi-zone function, see the section 6 "Using the multi-zone function" of "Step 3: Playing Back".

5.1 ch: Connect the speakers "#$%&' to the unit. "# output front stereo sound. $outputs center sounds such as dialogs and vocals. %& create back sound field. ' reproduces bass sounds and creates rich sound field. Up to 4 subwoofers can be connected to the unit.

Surround back speakers: Placing 78 configuration that improves sense of envelopment created by back sound field. It also improves seamlessness of back sounds and provides more natural sound experiences in the sound field.

Height speakers 1 and 2: Placing 9F or GH speakers produce surround effects on a height plane.

To enjoy the Dolby Atmos listening mode, Height 1 speakers or Surround

back speakers need to be installed. Although Height 1 speakers can enhance surround effects, we recommend you to add Height 2 speakers in order to ensure full effects. Install Height speakers such as Front High and Rear High speakers on the upper part of the front or rear wall. There are other types of Height speakers.

Wide speakers: Placing IJ speakers makes the front sound field even wider. It also give smoother transitions between front and back surround sounds.

Height speakers arrangements (Dolby Atmos)

There are several types of height speakers other than those mentioned in the previous section. See the next section "Combination patterns for Height speakers 1 and 2" and select the combination pattern from those specified for Height speakers 1 and Height speakers 2.

This unit performs optimal sound field processing for the type of Height speakers 1 and 2 which is registered in initial settings (with setup wizard) according to an actual speaker layout. Note that the optimal effect cannot be achieved if you place height speakers in a combination pattern other than those specified. Dolby recommends to place the speakers as described in Installing speakers in ceiling to obtain the best Dolby Atmos effect.

Using Dolby Enabled Speakers

a b

e f

c d

a b Dolby Enabled Speaker (Front) c d Dolby Enabled Speaker (Surround) e f Dolby Enabled Speaker (Back)

A Dolby Enabled Speaker is specially designed to be used as a Height speaker. There are two types of Dolby Enabled Speakers, the one is to be placed on the top board of other speakers such as front speakers and surround speakers, and the other is integrated type with the normal speakers. Dolby Enabled Speakers placed with their diaphragms facing toward the ceiling create higher effect in the Dolby Atmos and Dolby Surround listening modes by providing sounds echoing off the ceiling.

Installing speakers in ceiling

g h

i j

k l

g h Top Front i j Top Middle k l Top Rear

6

Step 1: Connections

Ceiling speakers, etc. are used for maximizing effects in Dolby Atmos or Dolby Surround listening mode. Install Top Front speakers midway between the position just above the listening position and the position just above the front speakers. Install Top Middle speakers just above the listening position. Install Top Rear speakers midway between the position just above the listening position and the position just above the surround back speakers.

Combination patterns for Height speakers 1 and 2

Dolby recommends the following combination pattern to obtain the best effect of Dolby Atmos and Dolby Surround listening modes.

Pair 1: Top Middle Pair 2: Top Front / Top Rear

The following are the patterns of Height speakers 2 that can be selected according to the type of Height speakers 1.

Height speakers1: Front High

Height speakers2: Not Use/Top Middle/Rear High/Dolby Enabled Speaker (Surround)/Dolby Enabled Speaker (Back)

Height speakers1: Top Front

Height speakers2: Not Use/Top Rear

Height speakers1: Top Middle

Height speakers 2 cannot be used.

Height speakers1: Dolby Enabled Speaker (Front)

Height speakers2: Not Use/Dolby Enabled Speaker (Surround)/Dolby Enabled Speaker (Back)

Height speakers1: Dolby Enabled Speaker (Surround)

Height speakers 2 cannot be used.

Height speakers1: Dolby Enabled Speaker (Back)

Height speakers 2 cannot be used.

When front speakers are bi-amp connected, you can select a pattern for Height speakers 2 from the following options. Not Use/Front High/Top Front/Top Middle/Dolby Enabled Speaker (Front)/Dolby Enabled Speaker (Surround)/Dolby Enabled Speaker (Back)

Notes for speaker connection

This unit works as an AV controller when connected with a separately sold multichannel power amplifier. Connect a power amplifier to the PRE OUT RCA jack or PRE OUT XLR jack of the unit and then connect speakers to the speaker terminals of the power amplifier. For how to connect the power amplifier with speakers, refer to the instruction manual of the multichannel power amplifier.

Set the crossover frequency, speaker distance and other speaker settings on this unit.

Connecting the multichannel power amplifier to the PRE OUT RCA jack Connect the multichannel power amplifier to the PRE OUT RCA jack. Connect the unit and power amplifier with an RCA cable.

$ Center

H

Height2 R/ J

Wide R

G

Height2 L/ I

Wide L

# Front R

& Surround R

F

Height1 R "

Front L 7

Surround back L

8

Surround back R

% Surround L

9

Height1 L

PUSHPUSH

RCA cable

7

Step 1: Connections

Connecting a subwoofer with built-in power amplifier

The maximum four units of two systems of subwoofer with built-in power amplifier can be connected to this unit. Use the SW1/2 PRE OUT RCA jack or SUBWOOFER 1/2 PRE OUT XLR jack according to the input jack of your subwoofer. You can also set the level and distance of the connected subwoofer.

If your subwoofer does not have built-in power amplifier, you can connect a power amplifier between the unit and the subwoofer.

Connection to the PRE OUT RCA jack Connect the RCA input jack of your subwoofer and the SW1/2 PRE OUT RCA jack of the unit with an RCA cable.

Subwoofer with built-in power amplifier

If you use one subwoofer system only, connect it to the SW1 PRE OUT RCA jack.

Connection to the PRE OUT XLR jack Connect the XLR balanced input jack of your subwoofer and the SUBWOOFER 1/2 PRE OUT XLR jack of the unit with an XLR balanced cable.

Subwoofer with built- in power amplifier

If you use one subwoofer system only, connect it to the SUBWOOFER 1 PRE OUT XLR jack.

Connecting the multichannel power amplifier to the PRE OUT XLR jack Connect the multichannel power amplifier to the PRE OUT XLR jack. Connect the unit and power amplifier with an XLR balanced cable.

Refer to the position indication for connection on the right of the PRE OUT XLR jack.

PUSHPUSH

$ Center

H

Height2 R/ J

Wide R

G

Height2 L/ I

Wide L

# Front R

& Surround R

F

Height1 R "

Front L 7

Surround back L

8

Surround back R

% Surround L

9

Height1 L

XLR balanced cable

8

Step 1: Connections

3 Other connections

AM/FM antenna connections

Connect the antennas to listen to AM/FM broadcast. When listening to the broadcast for the first time, adjust the antenna position and orientation to get the best reception.

AM loop antenna (supplied)

Indoor FM antenna (supplied)

Fix with a tack on the wall.

(North American model)

(European and Asian models)

Assemble the AM loop antenna (supplied).

Network connection

You can enjoy Internet radio and DLNA by connecting the unit to LAN. The unit can be connected to the router with an Ethernet cable or to the wireless LAN router with Wi- Fi connection. In case of wired connection, connect the Ethernet cable to the Ethernet port. See "4th Step: Network Connection" of "Step 2: Setting Up".

Internet radio

Router PC

NAS

Headphones connection

or 6.3 mm) to the PHONES jack on the front panel. Sound from the speakers will be off while you are using the headphones.

If you selected any other listening mode than Pure Audio, Stereo, Mono and Direct, connecting headphones will switch the listening mode to Stereo.

9

Step 2: Setting Up

Important: When the unit is turned on for the first time, the setup wizard of the section 2 will automatically be launched. If you use the setup wizard to make the initial setup, connect a TV to the HDMI OUT MAIN or SUB jack of the unit via HDMI connection.

1 Turning the power on

Connect the power cord to the outlet. Press zON/ STANDBY on the main unit or zRECEIVER on the remote controller to turn the unit on or to standby mode.

Initial Setup

Language Select

English

Deutsch

Franais

Espaol

Italiano

Nederlands

Svenska

HOME Exit

This model includes a removable power cord. Connect the power cord to AC INLET of the unit and then connect to the outlet. Always disconnect the outlet side first when disconnecting the power cord. When the unit is turned on, a large instantaneous current may flow affecting functionality of the computer and other devices. It is recommended to use a separate outlet from that for the computer or such other sensitive devices.

Firmware update notification: If the unit is connected via LAN and there is firmware update available, the "Firmware Update Available" message will appear. To execute updating, select "Update Now" with the cursor buttons of the remote controller and press ENTER. When "Completed!" appears, press zON/STANDBY on the main unit to turn the unit into standby mode. Then updating will be completed.

The unit automatically turns itself into standby mode 3 minutes after "Completed!" appears on the display. In this case also, updating will be completed.

2 Making the Initial Setup with the Setup Wizard

Read before starting the procedure: Set up by answering the guidance displayed on the TV screen. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection. To return to the previous screen, press RETURN.

If you terminate the procedure on the way or change the setting made in the initial setup and want to call up the setup wizard again, press RECEIVER and then HOME on the remote controller, select "Setup" - "7. Hardware Setup" - "Initial Setup", and press ENTER.

Select the language first. In the next screen, the summary of the setup wizard as below will be displayed. Select "Yes" in this screen and press ENTER on the remote controller.

Welcome to initial setup. Have you connected all the speakers and devices?

Before starting, please connect speakers and sources.

Now, would you like to start initial setup?

1st Step : AccuEQ Room Calibration

2nd Step : Source Connection

3rd Step : Remote Mode Setup

4th Step : Network Connection

Yes

No

Initial Setup

ExitHOME

The setup wizard proceeds in the four steps as below. 1st Step : AccuEQ Room Calibration 2nd Step : Source Connection 3rd Step : Remote Mode Setup 4th Step : Network Connection

1st Step : AccuEQ Room Calibration

The test tone coming from each speaker will be measured to enable setting of the number of speakers, volume level, each speaker's optimum crossover frequencies, and distance from the primary listening position, and also enable correction of distortion caused by the room acoustic environment.

You cannot return to the previous screen during speaker setup, even if you press RETURN. You cannot setup the wide speaker setting in this setup procedure. For details on setting up the wide speakers, see the Advanced Manual.

Initial Setup

AccuEQ Room Calibration

This step you can automatically calibrate

your room to get correct surround sound.

Would you like to cailbrate your room now

or later?

Do it Now

Do it Later

ExitHOME

1. Place the speaker setup microphone. When the start screen above is displayed, before starting the procedure, place the supplied speaker setup microphone at the measurement position by referring to the figure below.

TV

Listening area Measurement position with microphone

Correct measurement will not be possible if the microphone is held by hand. Measurement is not possible if headphones are being used. The subwoofer sound may not be detected since it is extremely low frequencies. Raise the subwoofer volume to around the half of its maximum volume and make its frequency to the maximum level. A loud test tone will be heard during measurement. Measurement may be interrupted if there is ambient noise or radio frequency interference (RFI). Close the window and turn off the home appliance and fluorescent light.

10

Step 2: Setting Up

2. After placing the microphone at the measurement position, select "Do it Now" with the cursors and press ENTER.

3. Connect the microphone to the SETUP MIC jack of the unit.

SETUP MIC jack

Speaker setup microphone

4. Follow the guidance displayed on the TV screen.

AccuEQ Room Calibration

Front Speakers Type

Height 1 Speakers Type

Height 2 Speakers Type

Normal

Not Use

Not Use

Set bi-amp only if you use 2 channel amp for each front speaker.

ENTER Next

REAR PANEL

SURROUND R

SURROUND L

WIDE R

WIDE L

BACK R

BACK L

FRONT R FRONT L

When the screen above is displayed, set the items with the cursors on the remote controller. Select the types for height 1/2 speakers if the Height speakers are used. After front and Height speakers types are selected, switch the screen using cursor l to select the type of subwoofer. After setting the items, press ENTER on the remote controller. Press ENTER again in the next screen to start automatic speaker setting.

When the cursor is on an item, the content of the item will be shown on the lower left of the screen.

5. The test tones sound from the connected speakers and automatic speaker setting starts. Measurement will be made twice for each speaker. It takes several minutes to be completed. Keep the room as quiet as possible during measurement. If any of the speakers do not produce the test tone, check for disconnection.

During measurement, each speaker outputs the test tones at a high volume. Be careful of sound leak that may disturb your neighbors, or be careful not to frighten young children.

6. When the measurement is completed, the measurement result is displayed. Press / on the remote controller to check the settings. Press ENTER with "Save" selected. In the next screen showing that "AccuEQ Room Calibration" is "On", press ENTER on the remote controller.

If there is an error message, follow the on-screen instruction to remove the error cause.

About THX playback THX recommends setting the speakers manually if you use THX-certified speakers or playing back with THX listening modes.

THX recommends setting the crossover frequency to 80Hz(THX) manually. Due to the electrical complexities and the interaction with the room, you may notice irregular results when setting the level or distance of each speaker. If this happens, THX recommends setting the speakers and the subwoofer manually.

7. When "Please unplug setup microphone." is displayed, disconnect the microphone.

2nd Step : Source Connection

You can check whether or not each input source is connected correctly.

1. When the Source Connection start screen is displayed, select "Yes, Continue" with the cursors and press ENTER.

This step will start to check if the

connections were made correctly.

Would you like to continue?

Yes, Continue

No. Skip

Initial Setup

Source Connection

ExitHOME

2. Select the desired input to check the connection and press ENTER. Start playback of the selected device. If connection is correct, video/audio of the input source selected on the unit will be played.

3. After checking the connection, select "Yes" with the cursors and press ENTER.

If you select "No" and press ENTER, the error cause will be displayed. Follow the guidance to remove the error cause and check the connection again.

4. Select "Yes" with the cursors and press ENTER on the remote controller to check the connection of other inputs or select "No, Done Checking" and press ENTER to skip. If you select "Yes", you will return to the screen of step 2. If you select "No, Done Checking", you will proceed to step 5.

5. Enabling HDMI Linked Operation and Other Functions In the next screen, you can enable the HDMI linked operation with CEC compliant device, connection with ARC compatible TV, and HDMI Through function. Select "Yes" with the cursors to enable them or "No, Done Checking" to skip, and press ENTER on the remote controller.

6. Select "Yes" with the cursors and press ENTER to enable the CEC link function or select "No" and press ENTER to keep it disabled.

The following CEC-compatible devices are found;

Do you wish to turn on the CEC link?

Integra DHS-8.8

Yes

No

Source Connection

ExitHOME

If you select "Yes", the connection with ARC compatible TV and HDMI Through function will be set to "Auto" and enabled.

3rd Step : Remote Mode Setup

HOME Exit

Initial Setup

Remote Mode Setup

Preprograming remote will give you control

of other devices from AV receiver remote

Would you like to setup your remote to

control your devices? This may take a while

depending on what and how many you have

connected. You can always come back to remote

setup from setup 8-2 Remote Mode Setup.

Yes

No. Skip

In this step, you can enable operation of the other components using the remote controller of the unit. When the Remote Mode Setup start screen is displayed, select

11

Step 2: Setting Up

"Yes" with the cursors and press ENTER on the remote controller. Follow the guidance to select the desired REMOTE MODE button and in the keyboard screen, enter the first three characters of the brand name of the device you are going to program (e.g., "ONK" for ONKYO) and search for the remote control code. The guidance will also explain how to set the remote controller.

4th Step : Network Connection

Do you want to connect network connection?

It gives you network services that our AV

receiver support. If you wish to skip this step.

select No. Skip.

Yes

No. Skip

HOME Exit

Initial Setup

Network Connection

You can check the network connection and make the Wi- Fi setting. When the Network Connection start screen is displayed, select "Yes" with the cursors and press ENTER on the remote controller. If you select "Wired" in the next screen, you can view the LAN cable connection status. To make the Wi-Fi setting, select "Wireless", press ENTER on the remote controller and follow the sections below.

Make the following preparations. Wi-Fi connection requires an access point such as wireless LAN router ( ). Write down the SSID and password (key) of the access point if they are shown in the label of the main body. If the access point has an automatic setting button (may be called differently according to the manufacturer), you can set up without inputting the password. For how to use the automatic setting button of the access point, refer to its instruction manual.

The unit supports Wi-Fi connection with 2.4 GHz access point.

1. Select the SSID of the access point to be connected with the cursor buttons and press ENTER. When the SSID of the access point appears on the TV screen, select the desired access point.

If you changed the initial setting of the access point to skip password entry, step 3 starts automatically. If you changed the initial setting of the access point to hide the SSID, see "When the access point is not displayed".

2. Select and set the authentication method. The "Enter Password" screen, instead of the following screen, may be displayed automatically if the wireless LAN router does not have an automatic setting button.

Wi-Fi Setup

Select the authentication method.

Enter Password

Push Button

PIN code

When the screen above is displayed, select and set one of the three authentication methods: "Enter Password", "Push Button" and "PIN code". See below for details of and how to set each method.

Enter Password: Enter the password of the access point to establish connection. 1 Select "Enter Password" with the cursor buttons and

press ENTER. 2 Enter the password ( ) on the keyboard screen, select

"OK" with the cursor buttons and press ENTER. Select "Shift" and press ENTER to toggle between upper and lower case. Select " " or " " and press ENTER to move the cursor to the selected direction. Select "Back Space" and press ENTER to delete the character at the left of the cursor position. To select whether to mask the password with "*" or display it in plain text, press D on the remote control. Press + 10 on the remote controller to enable the "Shift" function and CLR to delete all the input characters.

3 If the security method of the access point to be connected is WEP, select "Default Key ID", select "OK" and press ENTER.

Push Button: Use the automatic setting button of the access point to establish connection. 1 Select "Push Button" with the cursor buttons and press

ENTER. 2 Hold down the automatic setting button of the access

point for the necessary seconds, select "OK" with the cursor buttons and press ENTER.

PIN code: Select this method when the automatic setting button of the access point is beyond the reach. Select "PIN code" with the cursor buttons and press ENTER to display the 8-digit PIN code. Register the displayed PIN code to the access point, select "OK" with the cursor buttons and press ENTER. For how to register the PIN code to the access point, refer to its instruction manual.

3. Establish connection. The connection process starts and the Wi-Fi indicator on the left of the unit's display starts flashing. When connection has been established, the Wi-Fi indicator changes from flashing to staying lit. If the Wi-Fi indicator does not stay lit, connection has not been established. Make the setting again. If "Push Button" does not work, try "Enter Password".

When the access point is not displayed Select "Other..." with the c cursor on the remote controller and press ENTER to display the keyboard screen. Input the SSID and password. Make the following settings according to the router setting.

WPA/WPA2 method Select "WPA" or "WPA2" in "Security method", select "OK" and press ENTER.

WEP method Select "WEP" in "Security method" and select "Default Key ID". Then select "OK" and press ENTER.

If encryption setting has not been made on the wireless LAN router, select "None" in "Security method", select "OK" and press ENTER.

Exiting the setup wizard

After finishing the initial setup, keep "Finished" selected and press ENTER on the remote controller. Connection and setting of the unit is now completed. See Step 3 and enjoy your home theater.

Step 3: Playing Back

12

1 Playing the player and TV

PLAYLISTPLAYLIST

SETUP RETURN

TV

REMOTE MODE / INPUT SELECTOR

HOME

PREV CH

MENU

GUIDE

TOP MENU

RECEIVER SOURCE ZONE 3 2 RED

REMOTE MODE

SLEEP

VOL

INPUT

ENTER

ALBUM

CH DISC

Q

GAME

TUNER

TV/CD

BD/DVD

P C AUX PHONO

STB/DVRCBL/SAT

MUTINGMODE RECEIVERT V

VOL

ALL OFF MY MOVIE MY TV MY MUSIC

BLUETOOTHUSBNET

RECEIVER

GREEN

To control the unit: The remote controller of this unit has the remote mode function for controlling other devices. You cannot control this unit when the remote controller is in the remote mode other than RECEIVER mode (for controlling this unit). Be sure to press 9 RECEIVER to select the RECEIVER mode before starting operation.

1. Turning the power on Press 1zRECEIVER on the remote controller to turn the power on.

Switch the input on the TV to that assigned to the unit. Use the TV's remote controller.

2. Select the input of the unit and start playback on the player or TV.

Press 2 INPUT SELECTOR to which the desired player has been assigned. Press TV/CD to play the TV's sound. You can also use the input selector buttons on the main unit. Input will automatically be selected if the TV or player is CEC compliant and connected to the unit with HDMI cable.

3. Select the desired listening mode. Press the 5 listening mode buttons to switch the mode so that you can enjoy different listening modes. For details on the listening modes, see the next section "Listening modes".

4. Adjust the volume with G.

1110 12

DIMMER DISPLAY D.TUN

PLAYLISTPLAYLIST

SETUP RETURN

T V

REMOTE MODE / INPUT SELECTOR

HOME

PREV CH

MENU

GUIDE

TOP MENU

RC-884M

RECEIVER SOURCE

REPEAT RANDOM MODESEARCH

ZONE 3 GREEN 2 RED

REMOTE MODE

SLEEP

VOL

INPUT

1 2 3

4 5 6

7 8 9

0+10 CLR

ENTER

ALBUM

CH DISC

Q

GAME

TUNER

TV/CD

BD/DVD

PC AUX PHONO

STB/DVRCBL/SAT

MUTINGMODE RECEIVERT V

VOL

MOVIE/TV MUSIC THXGAME

ALL OFF MY MOVIE MY TV MY MUSIC

BLUETOOTHUSBNET

7

8

9

F

G

H

I

J

1

2

3

4

5

6

Remote controller parts name

1 zRECEIVER button: Turns the unit on or into standby mode.

2 REMOTE MODE/INPUT SELECTOR button: Switches the input to be played.

3 Cursor buttons and ENTER button: Moves the cursor and confirms the selection.

4 Q SETUP button: Displays the Quick Setup menu that allows you to set the frequently used functions including input selection and volume adjustment.

5 Listening mode buttons: Allows you to select the listening mode.

6 DIMMER button: Switches the brightness of the display. This button works for turning on/off the MASTER VOLUME control as well.

7 ZONE button : For use when the unit is connected with an integrated amplifier in a separate room and sound is played there.

8 SLEEP button: Sets the time until the unit enters standby mode automatically.

9 RECEIVER button: Switches the remote controller to the mode for operating this unit.

F MUTING button: Temporarily mutes audio. G VOLUME buttons: Allows you to adjust the volume. This

button also cancels the muting. H RETURN button: Returns the display to the previous

state. I HOME button: Displays the Home menu that allows you

to make advanced settings and use Internet radio and DLNA.

J DISPLAY button: Switches the information on the display.

The buttons other than 1 to J are for operating other devices.

13

Step 3: Playing Back

Listening modes

You can select a listening mode from various options such as Dolby Digital, Dolby Atmos and DTS. Select the desired mode by switching and listening actual sound in different modes. The selectable listening modes depend on the format of the input signals.

MOVIE/TV: You can select a listening mode suitable for movies and TV programs.

MUSIC: You can select a listening mode suitable for music.

GAME: You can select a listening mode suitable for games.

THX: You can select a THX listening mode.

PURE AUDIO (main unit only): The display and analog video circuits are cut off to provide purer sound.

For details on the listening modes, see the Advanced Manual.

"Direct" for playing the input signals as-is Selecting this mode allows the input signals to be played as they are. For example, 2 ch signals of music CD will be played in stereo, 5.1 ch signals in 5.1 ch, and Dolby Digital signals of blu-ray disc or DVD in the Dolby Digital sound field according to the specified number of channels.

Other useful functions

Playing Video and Audio from Different Sources: It is possible to play audio and video from different sources. For example, you can play audio from the CD player and video from the BD/DVD player. In this case, press BD/DVD and then TV/CD. Then start playback on the BD/DVD player and CD player. This function is effective when an input with audio only has been selected (TV/CD, TUNER or PHONO in the initial setting).

Adjusting Sound Quality: It is possible to enhance or moderate the low and high pitched ranges of front speakers. Press TONE on the main unit several times to select the desired setting from "Bass", "Treble" and "Phase Matching Bass", and adjust with +/-.

It cannot be set if the listening mode is Pure Audio, Direct or THX.

"Bass": Allows you to enhance or moderate the low pitched range. "Treble": Allows you to enhance or moderate the high pitched range. "Phase Matching Bass": Allows you to keep the clear midrange and effectively enhance the bass.

Muting Temporarily: Press MUTING on the remote controller. To cancel the muting, press MUTING again, or press VOLj/l.

Changing the Display Brightness: Press DIMMER on the remote controller. The display brightness changes each time you press the button.

Checking the Input Format: Press DISPLAY on the remote controller several times to switch the display of the main unit in order of:

Input source & Listening mode

Signal format & Sampling frequency

Input signal resolution & Output resolution

If "Dolby D 5.1" is displayed in Signal format, the Dolby Digital 5.1 ch signals are being input. When listening to AM/FM radio, the band, frequency and preset number are displayed.

2 Listening to AM/FM Radio

The Basic Manual explains the method using automatic tuning. For manual tuning, see the Advanced Manual.

1. Press TUNER on the main unit several times to select either "AM" or "FM".

2. Press TUNING MODE on the unit, so that the "AUTO" indicator on the display lights.

3. Press TUNING lj on the main unit. The automatic tuning to a radio station starts. Searching

stops when one is tuned. When tuned into a radio station, the "cTUNEDd" indicator on the display stays lit. The "FM STEREO" indicator lights if the radio station is an FM radio station.

TUNED

FM STEREO

AUTO

(Actual display varies depending on the country.)

Registering a radio station: You can register up to 40 of your favorite AM/FM radio stations.

1. Tune into the AM/FM radio station you want to register.

2. Press MEMORY on the unit. The preset number on the display flashes.

3. Repeatedly press PRESET d c on the main unit to select a number between 1 and 40 while the preset number is flashing (about 8 seconds).

4. Press MEMORY on the unit again. When registered, the preset number stops flashing. To select a preset radio station, press PRESET d c

3 Connecting and playing the Bluetooth- enabled device

You can wirelessly enjoy music files stored in a smartphone or other Bluetooth-enabled device. The coverage area is 48 feet (15 meters).

The Bluetooth-enabled device needs to support the A2DP profile.

14

Step 3: Playing Back

The SCMS-T content protection method is supported. A Bluetooth-enabled device compatible with the SCMS-T content protection method can be played. Note that connection is not always guaranteed with all Bluetooth-enabled devices.

Pairing

Pairing is necessary when using the Bluetooth-enabled device for the first time. Before starting the procedure, learn how to enable the Bluetooth setting function and to connect with other devices on the Bluetooth-enabled device.

1. Press BLUETOOTH on the remote controller. The unit enters the pairing mode and the BLUETOOTH indicator starts flashing.

2. While the BLUETOOTH indicator is flashing (about 2 minutes), complete connection on the Bluetooth- enabled device in the nearby area. If the name of this unit is displayed on the Bluetooth- enabled device's display, select this unit. Paring will end after a short time.

If a password is requested, enter "0000". When connecting the unit to any other Bluetooth- enabled device, start pairing by pressing and holding BLUETOOTH until the BLUETOOTH indicator starts flashing. This unit can store the data of up to ten paired devices.

Playing sound of the Bluetooth-enabled device

If the unit is on and the Bluetooth-enabled device is connected, the input will be automatically switched to BLUETOOTH. Play music in this state.

It may take about a minute until connection is established when the unit is on since the Bluetooth function takes some time to start up. If the volume setting on the Bluetooth-enabled device is low, the sound will not be output from this unit. Due to the characteristics of Bluetooth wireless technology, the sound produced on this unit may slightly be behind the sound played on the Bluetooth-enabled device.

4 Using the Home menu

In the Home menu, you can make advanced setup and use Internet radio and DLNA function. For details on the operation, see the Advanced Manual.

1. After pressing RECEIVER, press HOME on the remote controller. The Home menu is displayed on the TV screen. You can also use the HOME button on the main unit.

Setup

HOME

2. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection. To return to the previous screen, press RETURN. To return to the Home menu, press HOME.

Sleep Timer: Select to turn the unit into standby mode automatically when the specified time elapses.

InstaPrevue: Select to preview videos input from the HDMI input jacks collectively in a single screen. The screen has a main window (current input video) and sub windows (other input videos). To switch the current input, select the desired sub window with the cursor buttons and press ENTER.

A black sub window is shown for the input with no video signals. "InstaPrevue" cannot be selected if the video is being input from HDMI IN 5, 6 or 7 or if there is no signal from the input currently selected. If "Zone2 Monitor Out" is set to "Use" and Zone 2 is turned on, you cannot select "InstaPrevue". Depending on video signals, the picture may not be properly rendered on the preview thumbnails.

Setup: You can change the assignment of input terminals and input selector buttons and also make various speaker settings and other advanced settings.

Network Service: Select to use Internet radio services and the DLNA function. When you connect the unit to the network and press ENTER, the network service screen will be displayed on the TV. On the TV screen, select the desired service or music file with the cursors of the remote controller and press ENTER to confirm and start playback.

Internet radio service: You can listen to TuneIn or such other Internet radio stations registered in advance.

DLNA : You can play music files stored in the PC or NAS device connected to the network. Select the server with the cursors, select the desired music file and press ENTER to start playback.

Home Media: You can play music files in a shared folder on the PC or NAS device connected to the network. Select the server with the cursors, select the desired music file and press ENTER to start playback.

"Network Service" becomes selectable after the network starts up even if it cannot be selected first. It may take about a minute to start up. When "Network Service" is selected for the first time, the "DISCLAIMER" screen will appear on the TV. Select "Agree" if you agree the content. If you do not agree the content, you cannot use the network service.

You cannot use the function unless the TV is connected via HDMI since selecting "Agree" in the "DISCLAIMER" screen is not possible.

Layout of the icons in the "Network Service" top menu can be changed. Press NET on the remote controller and press D. Select the source icon with the cursors and press ENTER, and then select the destination icon and press ENTER. The positions of the icons are switched each other.

USB: Select "USB" in the TV screen and connect a USB storage device to the USB port on the front panel. On the TV screen, select the desired folder or music file with the cursors of the remote controller and press ENTER to confirm and start playback.

"USB" becomes selectable after the USB function starts up even if it cannot be selected first. It may take about a minute to start up.

15

Step 3: Playing Back

5 Using Quick Setup menu

In the Quick Setup menu, you can set frequently used functions including input selection and volume adjustment.

1. Press Q SETUP on the remote controller. The Quick Setup menu is displayed on the connected TV's screen.

CBL/SAT

Input

Audio

Video

Information

Listening Mode

BD DVD

CBL/SAT

STB DVR

GAME

PC

AUX

2. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection.

To return to the previous screen, press RETURN.

Input: Select the input and check the assignment of input selector buttons.

Audio: You can perform various audio settings including audio quality and speaker level adjustment.

You cannot select this item when audio is output from the TV's speakers.

A/V Sync: If the video is behind the audio, you can delay the audio to offset the gap. Different settings can be set for each input.

It cannot be set if the input is "NET", "USB" or "BLUETOOTH". It cannot be set if the listening mode is Pure Audio or Direct.

Bass, Treble: Adjust volume of the front speaker. It cannot be set if the listening mode is Pure Audio, Direct or THX.

Phase Matching Bass: Suppress phase shift in the midrange to enhance bass sound. Thus smooth and powerful bass sound can be obtained.

It cannot be set if the listening mode is Pure Audio, Direct or THX.

Subwoofer 1/2 Level, Center Level: Adjust the speaker level while listening to the sound. The adjustment you made will be reset to the previous status when you turn the unit to standby mode.

The speakers cannot be adjusted if they have been set to "No" or "None" in "Speaker Configuration". "Subwoofer 2 Level" cannot be adjusted if "Subwoofer" has been set to "1ch" in "Speaker Configuration".

AccuEQ Room Calibration: Disables the sound field set in the automatic speaker setting. The setting can be separately set to each input.

This setting cannot be selected if the automatic speaker setting has not been performed. It cannot be set if headphones are connected or the listening mode is Pure Audio or Direct.

Late Night: Make small sounds to be easily heard. It is useful when you need to reduce the volume while watching a movie late night. You can enjoy the effect on Dolby Digital and Dolby Digital Plus sources only.

Turning the unit to standby mode will set the setting to "Off". This function cannot be used if "Loudness Management" have been set to "Off".

Music Optimizer : Improve the quality of the compressed audio. Playback sound of lossy compressed files such as MP3 will be improved. The setting can be separately set to each input.

The setting is effective in the signals of 48 kHz or less. The setting is not effective in the bitstream signals. It cannot be set if the listening mode is Pure Audio or Direct.

Re-EQ, Re-EQ (THX): Adjust the soundtrack that was processed to enhance its high pitch range, in order to make it suitable for home theater.

In Re-EQ, the following listening modes can be used: Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Multichannel, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio, DTS Express, DSD, and DTS Neo:X Cinema. In Re-EQ (THX), the following listening modes can be used: THX Cinema, THX Surround EX, and THX Ultra2 Cinema.

Screen Centered Dialog : Height speakers are used to move acoustic images such as dialogs from the center speakers upward according to the height of the TV screen. Acoustic images of the center speakers move up as the set value is increased.

This item may not be available depending on the selected listening mode. This function cannot be used if headphones are connected. This function cannot be used if neither "Height 1 Speakers Type" nor "Height 2 Speakers Type" is set to "Front High".

Video:

Monitor Out: The video input signals input to the unit will be converted by the unit when they are output from the HDMI OUT jack to the TV so that their resolution can match that of the TV used. Select the HDMI OUT jack to be used for output.

Control Monitor: Select the main room TV or the separate room TV for which the CEC link function is enabled when HDMI connection between the unit and the separate room TV is established by multi-zone function.

For details on multi-zone function, see the next section "Using the multi-zone function".

Wide Mode: You can set the aspect ratio.

Picture Mode: You can adjust the image quality. "Cinema" will automatically adjust the image to be suitable to watch movie and "Game" suitable to play game. In "Standard", the resolution will be changed but the image quality will not be adjusted. In "Custom", "ISF Day" and "ISF Night", you can adjust the brightness, contrast, hue and saturation as desired. If you do not adjust the resolution and image quality, select "Bypass".

"Video" cannot be selected if the input is "NET", "USB" or "BLUETOOTH".

Information:

Audio: Displays the audio input source, format, number of channels, sampling frequency, listening mode, number of output channels, and other audio information.

Video: Displays the video input source, resolution, signal format, color tone, 3D information, Aspect, Picture Mode, output, and other Video information.

Tuner: Displays the band, frequency, preset number, and other tuner (radio) information.

Listening Mode: Select the listening mode from the categories of "MOVIE/TV", "MUSIC", "GAME" and "THX".

It cannot be set when audio is played from the TV's speakers.

16

Step 3: Playing Back

6 Using the multi-zone function

The function allows you to connect the unit with a TV or audio equipment placed in a separate room so that you can enjoy audio and video of the connected equipment even if you are staying in a different room. It is possible to perform playback in the main room and a separate room at the same time, for example by playing the Blu-ray Disc player in the main room where the unit is placed while playing Internet radio in a separate room. It is also possible to perform playback only in a separate room. There are three methods to configure multi- zone connection as described in "a" to "c" in the following section. Simultaneous playback in all zones is also possible.

Zone 2

Zone 3

Main room

Types of source you can enjoy in a separate room: As the Zone 2 playback source, you can select from an external device connected to the HDMI input jack or the analog audio input jacks ( ) of the unit, the "NET", "USB" and "BLUETOOTH" sources, and the AM/FM broadcasting. As

the Zone 3 playback source, you can select from an external device connected to the analog audio input jacks ( ) of the unit, the "NET", "USB" and "BLUETOOTH" sources , and the AM/FM broadcasting.

When you connect a CD player or such other player without HDMI output jack, connect it to the analog audio input jacks of the unit. Multi-zone output is not possible if the connection is only with digital optical cable or digital coaxial cable. In case of analog connection, analog audio output setting may be necessary on the player.

As for HDMI input and analog audio input, it is possible to play the same source or different sources in the main room and separate room. As for the "NET", "USB" and "BLUETOOTH", you cannot select different audio sources for the main room and separate room. For example, if "NET" has been selected in the main room and then "USB" is selected as playback source in the separate room, the input in the main room will change to "USB" accordingly. When listening to AM/FM broadcasting, you cannot select different stations for the main room and separate room. Therefore broadcasting of the same station will be heard in the both rooms. If you play the same HDMI connected player for the main room and a separate room, the sound field processing for 2 ch PCM signals will be made in the main room.

Outputting Video/Audio to a Separate Room

a. HDMI TV connection in separate room You can play video and audio of the HDMI connected player on the TV in a separate room. With an HDMI cable, connect between the HDMI OUT ZONE 2 jack of the unit and the HDMI IN jack of the TV in a separate room.

Zone 2

Change the setting: Press RECEIVER and then HOME on the remote controller, select "Setup" - "1. Input/Output Assign" - "Monitor Out" - "Zone 2 Monitor Out" and set the setting to "Use".

Refer to "Control Monitor" in "Using Quick Setup menu" for using CEC link function with TV in the separate room.

b. Connecting a TV in a separate room using composite video cable Video from the player without HDMI out jack can be displayed on the TV in a separate room. First, connect the player to composite video input jack of the unit. Then, connect the TV in the separate room to ZONE 2 OUT V jack of the unit using a composite video cable.

Zone 2

It is not possible to output video from the player to the TV in the separate room if the player is connected to the HDMI IN jack or COMPONENT VIDEO IN jack. In this connection method, audio from the player cannot be output from the TV. To output audio in the separate room, see the next section "Listening to Music in a Separate Room" and connect the unit to the integrated amplifier located in the room where the TV is placed.

17

Step 3: Playing Back

Listening to Music in a Separate Room

c. Connecting an integrated amplifier in a separate room It is possible to play 2 ch source in a separate room while 11.2 ch source is being played in the main room. Connect the PRE/LINE OUT ZONE2 jacks or PRE/LINE OUT ZONE3 jacks of the unit and the line-in jacks of the integrated amplifier in a separate room with an RCA cable.

Zone 2 Zone 3

Volume can be adjusted with both the unit and the integrated amplifier used in a separate room. To adjust it with the unit, press RECEIVER and then HOME on the remote controller, select "Setup" - "7. Hardware Setup" - "Multi Zone" - "Zone 2 Out" or "Zone 3 Out" and set the setting to "Variable". If you connect a power amplifier, be sure to make the setting and adjust the volume in the main room.

Performing Multi-zone Playback

1. Press ZONE on the remote controller several times to select Zone 2 or Zone 3. Point the remote controller at this unit and press zRECEIVER. "Z2" or "Z3" lights on the main unit display and Zone function is enabled.

The ZONE button stays lit red when Zone 2 is selected and green when Zone 3 is selected.

2. Press INPUT SELECTOR of the input source you want to play in the separate room. If you turn the unit to standby during multi-zone playback, the Z2/Z3 indicators are dimmed and the playback mode is switched to playback in a separate room only. Performing steps 1 and 2 while the unit is in standby also switches the playback mode to playback in a separate room only.

To control on the main unit: Press ZONE 2 or ZONE 3 and within 8 seconds, press the input selector button of the input to be played in a separate room. To play the same source in the main room and separate room, press ZONE 2 or ZONE 3 twice.

To turn off the multi-zone function: Press ZONE on the remote controller several times to select Zone 2 or Zone 3 and press zRECEIVER. To control on the main unit, press ZONE 2 or ZONE 3 and within 8 seconds, press OFF.

To adjust the volume: Press ZONE on the remote controller several times to select Zone 2 or Zone 3 and adjust with VOLj/l. To control on the main unit, press ZONE 2 or ZONE 3 and within 8 seconds, adjust with the MASTER VOLUME control.

To mute temporarily: Press ZONE on the remote controller several times to select Zone 2 or Zone 3 and press MUTING.

To adjust the sound quality for the separate room (Zone 2 only): It is necessary to make appropriate settings to enable this function. Press HOME on the remote controller and select"Setup"-"7.Hardware Setup"-"Multi Zone"-"Zone 2 Out", and set its value to "Variable".As for the operation, press ZONE 2 on the main unit and press TONE several times to display "Bass", "Treble" or "Balance" on the main unit display.Display the desired setting on the display and adjust it with + or -.

When a TV in a separate room is HDMI connected to the unit, information of a connected device can be displayed on the TV screen. Press ZONE on the remote controller several times to select Zone 2 and press DISPLAY.

If Zone 2 or Zone 3 is on, power consumption during standby becomes larger than normal. If ZONE 2 or ZONE 3 is turned on when the listening mode of the main room is Pure Audio, it will automatically switch to Direct. While ZONE 2 or ZONE 3 is on, the RI linked system function (interlink between Onkyo components) is disabled. Pressing INPUT SELECTOR on the remote controller while you are using the remote controller for Zone 2 or Zone 3 will switch the controlled target to the main room. To control Zone 2 or Zone 3 again, press ZONE several times to select Zone 2 or Zone 3.

WHOLE HOUSE MODE: If you press WHOLE HOUSE MODE while playback is being performed in the main room, the WHOLE HOUSE MODE is turned on, "Z2" and "Z3" on the display light at the same time and the playback sources of all the rooms are switched to the same source at once.

WHOLE HOUSE MODE is effective only for playback of the external player connected to the analog audio input jacks. This function cannot be used if headphones are connected or audio is output from the speakers of the TV.

18

Front Panel

1 zON/STANDBY button: Turns the unit on or into standby mode.

2 PURE AUDIO button and indicator: Switches to the PURE AUDIO mode.

3 Remote control sensor: Receives signals from the remote controller.

4 BLUETOOTH indicator: Flashes while pairing with a Bluetooth-enabled device is in progress and stays lit when pairing is completed.

5 Wi-Fi indicator: Lights when the unit is connected to the wireless LAN router.

6 DOLBY ATMOS indicator: Stays lit when the Dolby Atmos listening mode is selected with Height speakers or Surround back speakers enabled.

7 Input selector buttons: Switches the input to be played.

8 Display 9 MASTER VOLUME control/indicator: Allows you to

adjust the volume. F HYBRID STANDBY indicator: Lights if the unit enters

standby mode when the HDMI Through, network standby or Wakeup from Bluetooth function is enabled.

G PHONES jack: Stereo headphones with a standard plug are connected.

H ZONE 2 button, ZONE 3 button and OFF button: Controls the multi-zone function.

I TONE and Tone Level buttons: Adjusts the high tone and low tone.

J MONITOR OUT button: Allows you to select the HDMI jack to output the video input signals that are input to the unit.

K DISPLAY button: Switches the information on the display.

L QUICK SETUP button: Displays the Quick Setup menu. M HOME button: Displays the Home menu. N Cursor buttons, TUNING lj button, PRESET d c

button and ENTER button: Moves the cursor and confirms the selection. When listening to AM/FM broadcasting, tune in to the station with TUNING lj or select the registered station with PRESET d c.

O RETURN button: Returns the display to the previous state.

G H J LK N P V W XI M O Q R S T U

1 2 3 456 87 F9

(European and Asian models)

19

P DIMMER button (North American model): Switches the brightness of the display. RT/PTY/TP button (European and Asian models): Can be used when receiving the station transmitting text information.

Q MEMORY button: Registers or deletes a station. R TUNING MODE button: Switches the tuning mode. S USB port: A USB storage device is connected so that

music files stored in it can be played. T LISTENING MODE buttons: Allows you to select the

listening mode. U AUX INPUT HDMI/MHL jacks: An HD video camera or

MHL-enabled mobile device is connected. It is possible to send video and audio of an MHL-enabled mobile device. AUX INPUT VIDEO/AUDIO, DIGITAL jacks: A video camera or such other device is connected.

V WHOLE HOUSE MODE button: Controls the WHOLE HOUSE MODE function to play the same source in all the multi-zone connected rooms.

W SETUP MIC jack: The supplied speaker setup microphone is connected.

X Front flap

1. 2.

4

F G

531 2 76

98

Display

1 Speaker/Channel display: Displays the output channel that corresponds to the selected listening mode.

2 Z2/Z3: Lights when the output to Zone 2/Zone 3 is set to on.

3 Lights according to the type of input digital signals and the listening mode.

4 Stays lit when Music Optimizer is enabled. 5 Lights when NET or USB is controlled. 6 NET: Stays lit when the "NET" input is selected and the

unit is connected to the home network (LAN). It will flash if the connection is not correct. USB: Stays lit when the "USB" input is selected and a USB storage device (e.g. USB memory) is connected. It will flash if the connection is not correct. HDMI: Stays lit when HDMI signals are input and the HDMI input is selected. DIGITAL: Stays lit when digital signals are input and the digital input is selected. MUTING: Flashes when MUTING on the remote controller is pressed and audio is temporarily muted. ANALOG: Stays lit when analog signals are input and the analog input is selected. Or, it stays lit when HDMI and digital signal inputs are not assigned. SLEEP: Stays lit when the sleep timer is set.

7 Tuning indicators RDS (European and Asian models): Stays lit when RDS broadcasting is being received. AUTO: Stays lit when the tuning mode is auto. TUNED: flashes while tuning is automatically performed. When tuned into a radio station, the " TUNED " on the display lights. FM STEREO: Stays lit when an FM broadcasting is being received.

8 Bi AMP: Stays lit when "Front Speakers Type" is set to "Bi-Amp".

9 Stays lit when headphones are connected. F Displays various information of the input signals.

Pressing DISPLAY displays the type of input digital signals and the listening mode.

G Displays the volume level.

20

Rear Panel

1 DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio signals are input.

2 RI REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and synchronized with this unit.

3 ETHERNET port: Used for LAN connection 4 Wireless antenna: Used for Wi-Fi connection or when

using a Bluetooth-enabled device. Adjust their angles according to the connection status.

90

180

90 180

5 HDMI IN/OUT jacks: Digital video signals and audio signals are transmitted between the unit and the connected devices.

6 MONITOR OUT V jack: Video signals are output to the connected monitor or TV via a composite video cable.

7 COMPONENT VIDEO IN and OUT jacks: Component video input/output jacks

8 ZONE 2 OUT V jack: Video signals of the player are output to the connected TV in the separate room.

9 IR IN A/B, IR OUT jacks: Connected to the multiroom remote control kit. ( )

F 12V TRIGGER OUT A/B/C jacks: Allows you to connect a device with 12V trigger input jack to enable link operation between the device and the unit. ( )

G PC IN jack: PC is connected via an analog RGB cable. H AC INLET: The power cord is connected.

I terminal: The supplied antennas are connected.

J RS232 port: Connected to the home control system. ( ) K GND terminal: The ground wire of the turntable is

connected. L Composite video and analog audio jacks: Analog

video signals and audio signals are input. M INPUT BALANCE L/R jacks: XLR balanced input jacks.

Use the BALANCE L jack for a monaural source. N PRE OUT RCA jacks: A power amplifier or subwoofer

with built-in amplifier is connected. O PRE OUT XLR jacks: An amplifier with balance-type

XLR input jacks is connected. P PRE/LINE OUT ZONE 2/ZONE 3 jacks: Audio output

jacks connected to the integrated amplifier for multi-zone playback in a separate room.

Special devices or cable connections are necessary to use the 9, F and J functions . Contact the specialized stores for more information.

PUSHPUSH

1 4 486

J

F G H I92 3 5 7

MLK N O P

21

Troubleshooting

Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/connecting the HDMI cable may solve it. When reconnecting, be careful not to wind the HDMI cable since if wound the HDMI cable may not fit well. After reconnecting, turn off and on the unit and the connected device.

The AV controller turns off unexpectedly. The AV controller will automatically enter standby mode when Auto Standby is set and launched.

Theres no sound, or its very quiet. A wrong input selector button has been selected. Select a correct input for the player. Also check that muting is not on. Not all listening modes use all speakers.

Theres no picture. A wrong input selector button has been selected. Video is not displayed if the listening mode is Pure Audio. To display video from the connected player on the TV screen while the unit is in standby, you need to enable HDMI Through function. When the TV image is blurry or unclear, power code or connection cables of the unit may have interfered. In that case, keep distance between TV antenna cable and cables of the unit. If you connect a player supporting HDCP2.2, be sure to connect it to the HDMI IN3 jack of the unit. At the time, connect the TV to the HDMI OUT MAIN jack.

HDMI control does not function correctly. Set the CEC link function of the unit to on. It is also necessary to make the HDMI linked system setting on the TV. See the TV's instruction manual for details.

The remote controller does not work. Be sure to press RECEIVER first before operating the unit with the remote controller.

There is no sound when Multi-Zone function is used.

When you connect a CD player or such other player without HDMI output jack, connect it to the analog audio input jacks of the unit. Multi-zone output is not possible if the connection is only with digital optical cable or digital coaxial cable. In case of analog connection, analog audio output setting may be necessary on the player.

Cannot access to network. Try plugging/unplugging the unit or the wireless LAN router or check their power-on status. This will work well in many cases. If the desired wireless LAN router is not in the access point list, it may be set to hide SSID or the ANY connection may be off. Change the setting and try again.

Bluetooth Try plugging/unplugging the unit and the Bluetooth- enabled player. After that, check that the Bluetooth function is enabled on the Bluetooth-enabled device and the connection with the unit has been established.

Resetting the unit

Resetting the unit to the status at the time of shipment may solve the problem. If the measures above do not solve the problem, reset the unit with the following procedure. If you reset the unit status, your preferences will be reset to the defaults. Note them down before starting reset.

How to reset:

1. While holding down CBL/SAT on the main unit (note that step 2 must be performed with this button pressed down)

2. Press zON/STANDBY on the main unit ("Clear" appears on the display and the unit returns to standby)

C l e a r

1. While holding down CBL/SAT,

2. Press zON/STANDBY.

How to reset the remote controller:

1. While holding down RECEIVER on the remote controller, press HOME (about 3 seconds) until RECEIVER lights.

2. Within 30 seconds, press RECEIVER again.

PLAYLISTPLAYLIST

SETUP RETURN

T V

HOME

PREV CH

MENU

GUIDE

TOP MENU

REMOTE MODE

VOL

INPUT ALBUM

CH DISC

Q

TUNER

MUTINGMODE RECEIVERT V

VOL

BLUETOOTHUSBNET

ENTER

RECEIVER

HOME

Specifications

22

Amplifier Section THD+N (Total Harmonic Distortion+Noise)

0.08% (20 Hz - 20 kHz, half power) Input Sensitivity and Impedance (Unbalance)

Rated RCA Output Level and Impedance

Maximum RCA Output Level and Impedance

Rated XLR Output Level and Impedance

Maximum XLR Output Level and Impedance

Phono Overload 70 mV (MM 1 kHz 0.5% Direct)

Frequency Response 5 Hz - 100 kHz/+1 dB, 3 dB (Direct mode)

Tone Control Characteristics 10 dB, 50 Hz (BASS) 10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio 110 dB (LINE, IHF-A) 80 dB (PHONO MM, IHF-A)

Video Section Input Sensitivity/Output Level and Impedance

B/CB, PR/CR)

Component Video Frequency Response 5 Hz - 100 MHz/+0 dB, 3 dB

Tuner Section FM Tuning Frequency Range

87.5 MHz - 107.9 MHz (North American) 87.5 MHz - 108.0 MHz, RDS (Others)

AM Tuning Frequency Range 522/530 kHz - 1611/1710 kHz

Preset Channel 40

Network Section Ethernet LAN

10BASE-T/100BASE-TX Wireless LAN

IEEE 802.11 b/g/n standard (Wi-Fi standard) 2.4 GHz band: 1 - 11 ch (North American)

10 - 11 ch (Spain) 10 - 13 ch (France) 1 - 13 ch (Others)

(Wi-Fi standard)

Bluetooth Section Communication system

Bluetooth Specification version 2.1 + EDR (Enhanced Data Rate) Maximum communication range

Line of sight approx. 15 m ( ) Frequency band

2.4 GHz band (2.4000 GHz - 2.4835 GHz) Modulation method

FHSS (Freq Hopping Spread Spectrum) Compatible Bluetooth profiles

A2DP 1.2 (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile)

Supported Codecs SBC

Transmission range (A2DP) 20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antennas performance, operating system, software application, etc.

General Power Supply

AC 120 V, 60 Hz (North American) AC 220 - 240 V, 50/60 Hz (Others)

Power Consumption 0.6 A (North American) 60 W (Others) 0.1 W (Stand-by, North American) 0.13 W (Stand-by, Others) 55 W (No-sound)

Dimensions (W H D) 435 mm 199 mm 461.5 mm 17-1/8" 7-13/16" 18-3/16"

Weight 14 kg (30.9 lbs.)

Input IN1 (BD/DVD), IN2 (CBL/SAT), IN3 (STB/DVR, HDCP2.2), IN4 (GAME), IN5 (PC), IN6, IN7, AUX INPUT (HDMI/MHL) (front)

Output OUT MAIN (ARC, HDCP2.2), OUT SUB, OUT ZONE2

Video Resolution Pass through: 4K 60 Hz (YCbCr 4:2:0) Upscaling: 4K 30 Hz

Audio Format Dolby Atmos, DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD, Multichannel PCM

Supported 3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC (RIHD), 4K (Upscaling and Passthrough)

Component IN1 (BD/DVD), IN2 (CBL/SAT)

Composite IN1 (CBL/SAT), IN2 (STB/DVR), IN3 (GAME), IN4 (AUX) (Front)

Analog RGB input PC IN

Component MONITOR OUT

Composite MONITOR OUT, ZONE2 OUT

Digital OPTICAL 1 (GAME), 2 (TV/CD), AUX INPUT DIGITAL (Front) COAXIAL 1 (BD/DVD), 2 (CBL/SAT), 3 (STB/DVR)

Analog BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, PHONO, AUX INPUT (Front)

Balance Inputs BALANCE L (MONO), BALANCE R

Analog PRE/LINE OUT ZONE2, ZONE3

Balance Pre Outputs PRE OUT FRONT L/R, CENTER, SURROUND L/R, BACK L/R, HEIGHT1 (or Bi-AMP) L/R, HEIGHT2/WIDE L/R, SUBWOOFER 1 2, SUBWOOFER 2 2

Analog Multichannel Pre Outputs FRONT L/R, CENTER, SURROUND L/R, BACK L/R, HEIGHT 1 L/R, HEIGHT 2 or WIDE L/R, SW1 2, SW2 2

Phones PHONES (Front, 6.3)

Setup Mic 1 (Front) RS232 1 Ethernet 1 IR IN 2 (A/B) IR OUT 1 12V TRIGGER OUT 3 (A/B/C) USB 1 (Front) RI 1

Specifications and features are subject to change without notice.

23

License and Trademark Information

Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Surround EX and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS-HD Master Audio and DTS Neo:X | 11.1 are trademarks of DTS, Inc. DTS, Inc. All Rights Reserved.

Qdeo and QuietVideo are trademarks of Marvell or its affiliates.

Re-Equalization and the Re-EQ logo are trademarks of THX Ltd.

Manufactured under license from THX Ltd. THX and the THX logo are registered in the U.S. and other jurisdictions. All rights reserved. Surround EX is a trademark of Dolby Laboratories. Used with permission. U.S. Pat. nos. 7,254,239 & 7,593,533 & 7,974,425 & 8,452,028 & 8,509,457 Taiwan Pat. I238671 European Pat. 1,360,874

THX Ultra2 Plus Before any home theater component can be THX Ultra2 Plus certified, it must pass a rigorous series of quality and performance tests. Only then can a product feature the THX Ultra2 Plus logo, which is your guarantee that the Home Theater products you purchase will give you superb performance for many years to come. THX Ultra2 Plus requirements define hundreds of parameters, including power amplifier performance, and integrated amplifier performance and operation for both digital and analog domains. THX Ultra2 Plus receivers also feature proprietary THX technologies (e.g., THX Mode) which accurately translate movie soundtracks for home theater playback.

AccuEQ, Music Optimizer, RIHD and WRAT are trademarks of Onkyo Corporation.

RIHD and RIHD (logo) are trademarks of Onkyo Corporation.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. Wi-Fi certified logo shows international association certifying interoperability Wi-Fi alliance ensures the product has passed the test for compatibility with other Wi-Fi certified equipment.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo is under license. Other trademarks and trade names are those of their respective owners. Onkyo does not guarantee Bluetooth compatibility between the AV controller and all Bluetooth-enabled devices. For compatibility between the AV controller and another device with Bluetooth technology, consult the devices documentation and dealer. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities.

MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or registered trademarks of MHL LLC in the United States and other counties.

InstaPrevue and the InstaPrevue logo are trademarks or registered trademarks of Silicon Image, Inc. in the United States and other countries.

Apple, iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.

Apple TV is a trademark of Apple Inc., registered in the U.S. and other countries.

SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All rights reserved.

DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.

Windows and the Windows logo are trademarks of the Microsoft group of companies.

QR Code is a registered trademark of DENSO WAVE INCORPORATED.

Safari is a trademark or registered trademark of Apple Computer, Inc. in the United States.

x.v.Color is a trademark of Sony Corporation.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

Xantech is a registered trademark of Xantech Corporation.

Niles is a registered trademark of Niles Audio Corporation.

All other trademarks are the property of their respective owners.

DISCLAIMER

Through this device you are able to link to other services or websites which are not under the control of any company which has designed, manufactured or distributed/have distributed this device, and its affiliates (collectively, Company). We have no control over the nature, content and availability of those services. The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them. All information, content and services available through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws of applicable countries. The information, content and services provided through this device are for your personal, noncommercial use only. Any information, content or services may not be used in any manner other than previously approved by the appropriate content owner or service provider. You may not modify, copy, republish, translate, exploit, create derivative works, upload, post, transmit, sell or distribute in any manner any information, content or services available through this device, unless expressly permitted by the appropriate copyright, patent, trademark and/or other intellectual property owner, including, without limitation, content owner or service provider. THE CONTENT AND SERVICES AVAILABLE THROUGH THIS DEVICE ARE PROVIDED AS IS. COMPANY DOES NOT WARRANT INFORMATION, CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE. COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Company makes no representation or warranty of any kind, express or implied, about the completeness, accuracy, validity, legality, reliability, suitability or availability with respect to the information, content or services available through this device. Company shall not be liable, whether in contract or tort, including negligence and strict liability, for any direct, indirect, special, incidental or consequential damages or any other damages arising out of, or in connection with, any information contained in, or as a result of the use of any content or service by you or any third party, even if Company has been advised of the possibility of such damages, nor shall Company be liable for any third party claims against users of this device or any third party. In no event shall Company be responsible nor liable for, without limiting the generality of the foregoing, any interruption or suspension of any information, content or service available through this device. Company is neither responsible nor liable for customer service related to the information, content and services available through this device. Any question or request for service relating to the information, content or services should be made directly to the appropriate content owners and services providers.

Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN http://www.onkyo.com/

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. For Dealer, Service, Order and all other Business Inquiries: Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/

For Product Support Team Only: 1-800-229-1687

Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 http://www.eu.onkyo.com/

Unit 1033, 10/F, Star House, No 3, Salisbury Road, Tsim Sha Tsui Kowloon, Hong Kong. Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.hk.onkyo.com/

1301, 555 Tower, No.555 West NanJing Road, Jingan District, Shanghai, China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396 http://www.cn.onkyo.com/The Americas

China

Europe

Asia, Oceania, Middle East, Africa Please contact an Onkyo distributor referring to Onkyo SUPPORT site. http://www.intl.onkyo.com/support/

The above-mentioned information is subject to change without prior notice. Visit the Onkyo web site for the latest update.

(Mainland)

(Hong Kong)

Meridien House, Ground oor, 69 - 71 Clarendon Road, Watford, Hertfordshire, WD17 1DS, United Kingdom Tel: +44 (0)8712-00-19-96 Fax: +44 (0)8712-00-19-95

* 2 9 4 0 1 6 7 8 *

D1406-0

SN 29401678 (C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.

Precautions

For European Models Declaration of Conformity We declare, under our sole responsibility, that this product complies with the standards: Safety Limits and methods of measurement of

radio disturbance characteristics Limits for harmonic current emissions Limitation of voltage changes, voltage

fluctuations and flicker RoHS Directive, 2011/65/EU Hereby, Onkyo Corporation, declares that

this PR-SC5530 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Undertegnede Onkyo Corporation erklrer herved, at flgende udstyr PR- SC5530 overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF.

Hiermit erklrt Onkyo Corporation, dass sich das Gert PR-SC5530 in bereinstimmung mit den grundlegenden Anforderungen und den brigen

einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Kesolevaga kinnitab Onkyo Corporation seadme PR-SC5530 vastavust

direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele.

Onkyo Corporation PR-SC5530 1999/5/

Por la presente, Onkyo Corporation, declara que este PR-SC5530 cumple con los requisitos esenciales y otras exigencias relevantes de la Directiva 1999/5/EC.

Par la prsente, Onkyo Corporation dclare que lappareil PR-SC5530 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.

Con la presente Onkyo Corporation dichiara che questo PR-SC5530 conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

iuo Onkyo Corporation deklaruoja, kad is PR-SC5530 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.

A Onkyo Corporation ezzennel kijelenti, hogy a PR-SC5530 tpus beren-

Hierbij verklaart Onkyo Corporation dat het toestel l PR-SC5530 in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Dyrektywy 1999/5/EC.

Eu, Onkyo Corporation, declaro que o PR-SC5530 cumpre os requisitos essenciais e outras provises relevantes da Directiva 1999/5/EC.

Directivei 1999/5/CE.

Onkyo Corporation izjavlja, da je ta PR-SC5530 v skladu z bistvenimi

Onkyo Corporation vakuuttaa tten ett PR-SC5530 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen.

vsentliga kraven och andra relevanta stadgar i Direktiv 1999/5/EC.

Hr me lsir Onkyo Corporation v yfir a varan PR-SC5530 er

EC. Onkyo Corporation erklrer herved at denne PR-SC5530 er i

overensstemmelse med vesentlige krav og andre relevante bestemmelser i direktiv 1999/5/EC.

osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 1999/5/EC.

Support for Spotify Connect

Spotify Connect can be supported by updating the unit's

firmware. Simply click the Connect icon and select the unit

on the playback screen of Spotify application to enjoy high

quality music streaming. To enable Spotify Connect, install

the Spotify application on your smartphone or tablet first.

Then, create a Spotify premium account. The Spotify software is subject to third party licenses found here:

www.spotify.com/connect/third-party-licenses

Notes for using multi-zone function To enjoy Spotify music in a separate room, select "NET"

as the input of the separate room.

Volume adjustment with the Spotify application is

possible only for the equipment connected to the

ZONE2/3 speaker terminals (compatible model only).

If any other terminal is used for connection, adjust the

volume on the audio equipment placed in a separate

room.

To enjoy Spotify music in the main room after playing

Spotify in a separate room, select "NET" as the input of

the main room.

Auto Power On Turning network standby on allows you to use the Auto

Power On function when using the Spotify application.

Support pour Spotify Connect

Spotify Connect peut tre pris en charge par la mise

jour du logiciel de l'unit. Cliquez simplement sur l'icne

Connect et slectionnez l'unit sur l'cran de lecture de

l'application Spotify pour profiter de la diffusion audio

de haute qualit. Pour activer Spotify Connect, installez

l'application Spotify sur votre smartphone ou tablette en

premier. Puis, crez un compte premium Spotify. Le logiciel Spotify est soumis des licences de tiers que vous trouverez ici :

www.spotify.com/connect/third-party-licenses

Remarques concernant la fonction multizone Pour profiter de la musique Spotify dans une pice

pice spare.

Le rglage du volume avec l'application Spotify n'est

possible que pour l'quipement connect aux bornes

d'enceintes ZONE2/3 (modle compatible seulement).

Si un autre type de borne est utilis pour la connexion,

rglez le volume sur l'quipement audio plac dans une

pice spare.

Afin de profiter de la musique Spotify dans la pice

principale aprs la lecture de Spotify dans une pice

pice principale.

Mise sous tension automatique La mise en veille du rseau vous permet d'utiliser la

fonction de mise sous tension automatique lors de

l'utilisation de l'application Spotify.

Compatibilidad con Spotify Connect

Spotify Connect ser compatible mediante la actualizacin

del firmware de la unidad. Simplemente haga clic en

el icono Connect y seleccione la unidad en la pantalla

de reproduccin de la aplicacin Spotify para disfrutar

de transmisin de msica de alta calidad. Para habilitar

Spotify Connect, instale primeramente la aplicacin Spotify

en su telfono inteligente o tableta. A continuacin, cree

una cuenta Spotify premium. El software de Spotify est protegido por licencias de terceros que

encontrar en:

www.spotify.com/connect/third-party-licenses

Notas sobre el uso de funcin multizona Para disfrutar de la msica de Spotify en otra habitacin,

seleccione NET como la entrada de dicha habitacin.

Con la aplicacin Spotify podr ajustar el volumen

solamente del equipo conectado a los terminales del

altavoz ZONE2/3 (nicamente modelos compatibles).

Si usa cualquier otro terminal para la conexin, ajuste

el volumen en el equipo de audio ubicado en dicha

habitacin independiente.

Para disfrutar de la msica de Spotify en la habitacin

principal despus de reproducirla en otra habitacin

Spotify, seleccione NET como la entrada de la

habitacin principal.

Activacin automtica Activar el modo de espera de red le permite usar la

funcin de activacin automtica al utilizar la aplicacin

Spotify.

Supporto per Spotify Connect

Spotify Connect pu essere supportato tramite

laggiornamento del firmware dellunit. sufficiente

cliccare sullicona Connect e selezionare lunit sulla

schermata di riproduzione dellapplicazione Spotify per

fruire di streaming di musica ad alta qualit. Per abilitare

Spotify Connect, installare anzitutto lapplicazione Spotify

sul proprio smartphone o tablet. Quindi, creare un account

premium Spotify. Il software Spotify soggetto a licenze di terze parti presenti allindirizzo:

www.spotify.com/connect/third-party-licenses

Note per lutilizzo della funzione multi-zona Per fruire di musica Spotify in una stanza separata,

selezionare NET come ingresso della stanza separata.

La regolazione del volume con lapplicazione Spotify

possibile solo per lapparecchiatura collegata ai terminali

dellaltoparlante ZONE2/3 (solo modello compatibile).

Se viene utilizzato qualsiasi altro terminale per il

collegamento, regolare il volume sullapparecchiatura

audio posizionata in una stanza separata.

Per fruire di musica Spotify nella stanza principale

dopo aver riprodotto Spotify in una stanza separata,

selezionare NET come ingresso della stanza

principale.

Accensione automatica Lattivazione dello standby di rete consente di utilizzare

la funzione di accensione automatica quando si utilizza

lapplicazione Spotify.

D1410-0

SN 29402014 (C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.

Untersttzung fr Spotify Connect

Spotify Connect kann durch Aktualisierung der Firmware

des Gerts untersttzt werden. Klicken Sie einfach auf

das Symbol Connect und whlen Sie das Gert auf

dem Wiedergabe-Bildschirm der Anwendung Spotify,

um hochqualitatives Musik-Streaming zu genieen. Zur

Aktivierung von Spotify Connect, installieren Sie die

Anwendung Spotify zuerst auf Ihrem Smartphone oder

Tablet. Erstellen Sie dann einen Spotify Premium-Account. Die Software Spotify bentigt Lizenzen dritter Parteien, die Sie hier finden:

www.spotify.com/connect/third-party-licenses

Hinweise zur Verwendung der Multizonenfunktion Zum Genuss von Spotify Musik in einem anderen Raum,

whlen Sie NET als Eingang fr den anderen Raum aus.

Lautstrken-Einstellung mit der Anwendung

Spotify ist nur fr Ausrstung mglich, die mit den

Lautsprecheranschlssen ZONE2/3 verbunden ist (nur

kompatibles Modell). Wird fr die Verbindung ein anderer

Anschluss verwendet, passen Sie die Lautstrke an

der Audio-Ausrstung an, die in einem anderen Raum

platziert ist.

Zum Genuss von Spotify Musik im Hauptraum nach dem

Abspielen von Spotify in einem anderen Raum, whlen

Sie NET als Eingang fr den Hauptraum aus.

Auto Power Ein Einschalten von Netzwerk-Standby ermglicht Ihnen die

Verwendung der Auto Power Ein-Funktion, wenn Sie die

Anwendung Spotify verwenden.

Ondersteuning voor Spotify Connect

Spotify Connect kan worden ondersteund door de

firmware van het toestel bij te werken. Klik simpelweg op

het pictogram Connect en selecteer het toestel op het

weergavescherm van de Spotify-toepassing om te genieten

van hoogwaardige muziekstreaming. Om Spotify Connect

in te schakelen, installeert u eerst de Spotify-toepassing op

uw smartphone of tablet. Maak vervolgens een premium

account voor Spotify. De software van Spotify is onderworpen aan licenties van derde partijen

die u hier terugvindt:

www.spotify.com/connect/third-party-licenses

Opmerkingen voor gebruik van de multi-zonefunctie Om te genieten van muziek van Spotify in een aparte

ruimte, selecteert u NET als de invoer van de aparte

ruimte.

Volumeregeling met de Spotify-toepassing is alleen

mogelijk voor de apparatuur verbonden met de

ZONE2/3-luidsprekeraansluitingen (alleen compatibel

model). Als een andere aansluiting wordt gebruikt

voor de verbinding, regel het volume dan op de

audioapparatuur in een aparte ruimte.

Om te genieten van muziek van Spotify in de

hoofdruimte na het afspelen van Spotify in een

aparte ruimte, selecteert u NET als de invoer van de

hoofdruimte.

Automatisch Inschakelen Aan Als u het netwerk in stand-by zet, kunt u de functie

Automatisch Inschakelen Aan gebruiken wanneer u de

Spotify-toepassing gebruikt.

Std fr Spotify Connect

Spotify Connect stds genom att uppdatera enhetens

firmware. Klicka p Connect-ikonen och vlj enheten

p Spotify-applikationens uppspelningsskrm fr

att njuta av hgkvalitativ musik-streaming. Fr att

aktivera Spotify Connect, mste du frst installera

Spotify-applikationen p din smartphone eller surfplatta.

Skapa sedan ett Spotify-premiumkonto. Spotify-programvaran omfattas av tredjepartslicenser som kan hittas hr:

www.spotify.com/connect/third-party-licenses

Anmrkningar fr anvndning av multizonsfunktionen

Fr att uppleva Spotify-musik i ett annat rum, vlj NET

som inmatning fr det andra rummet.

Justering av volymen fr Spotify-applikationen r

endast mjlig fr utrustningen som r ansluten till

ZONE2/3-hgtalarkontakterna (endast kompatibla

modeller). Om ngon annan kontakt anvnds fr

anslutningen, justera volymen p ljudutrustningen i det

andra rummet.

Fr att uppleva Spotify-musik i huvudrummet efter att

du har spelat Spotify i ett annat rum, vlj NET som

ingngsklla fr huvudrummet.

Automatiskt strmpslag Genom att sl p ntverks-standby kan du anvnda

funktionen fr automatiskt strmpslag nr du anvnder

Spotify-applikationen.

Spotify Connect -tuki

Spotify Connect voidaan tukea pivittmll laitteen

ohjelmisto. Napsauta Connect-kuvaketta ja valitse

laite Spotify-sovelluksen toistonytss nauttiaksesi

korkealaatuisesta musiikin suoratoistosta. Ota

Spotify Connect kyttn asentamalla Spotify-sovellus

ensin lypuhelimeesi tai tablettiisi. Luo sitten Spotify

Premium -tili. Spotify-ohjelmistoon sovelletaan kolmannen osapuolen lisenssej, jotka

lytyvt tlt:

www.spotify.com/connect/third-party-licenses

Huomautuksia monivyhyketoiminnon kytst Nauti Spotify-musiikista erillisess huoneessa

valitsemalla erillisen huoneen tulolhteeksi NET.

nenvoimakkuuden st Spotify-sovelluksella

on mahdollista vain laitteella, joka on kytketty

ZONE2/3-kaiutinliitntn (vain yhteensopiva malli). Jos

jotain muuta kaiutinptett kytetn kytkemisess,

sd nenvoimakkuutta nentoistolaitteesta joka

sijaitsee erillisess huoneessa.

Kun haluat nauttia Spotify-musiikista phuoneessa

sen jlkeen kun Spotify-musiikkia on toistettu erillisess

huoneessa, valitse NET tulolhteeksi phuoneessa. </

Manualsnet FAQs

If you want to find out how the PR SC5530 Onkyo works, you can view and download the Onkyo PR SC5530 Basic Manual on the Manualsnet website.

Yes, we have the Basic Manual for Onkyo PR SC5530 as well as other Onkyo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Basic Manual should include all the details that are needed to use a Onkyo PR SC5530. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Onkyo PR SC5530 Basic Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Onkyo PR SC5530 Basic Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Onkyo PR SC5530 Basic Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Onkyo PR SC5530 Basic Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Onkyo PR SC5530 Basic Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.