Öhlins 886601 Fork Spring Mounting Instructions PDF

1 of 4
1 of 4

Summary of Content for Öhlins 886601 Fork Spring Mounting Instructions PDF

Spring kit normal height 10 N/mm for FKC102

08866-01 Mounting Instructions

Notee!1 Before you install this product, check the kit contents. If anything is missing, please contact an hlins dealer.

arninge! After you have installed the hlins product, take a test ride at low speed to ensure that the vehicle has maintained stability.

Kit Contents

Description Part No Pcs

Main spring 08790-10 2 Preload tube 01460-70 2

arninge! Only approved hlins personnel are permitted to install this kit. The procedure requires specific tools. This product is an important part of the vehicle and the vehicle stability.

2

Install the spring and the spacer The procedure requires specific tools and knowledge. Install the top out spring (A) in the fork leg. Install the cartridge (B), spring (C), preload

tube (D) and top cap. Make sure to install all parts in the correct order.

MOUNTING INSTRUCTIONS Make sure you choose the correct spring for your rider weight, driving style and preferences. Contact an authorized hlins service center for advice.

arninge! An incorrect spring rate can give a faulty front geometry leading to under or over steering and seriously affect the ground clearance and vehicle handling.

Notee!1 Please note that there can be small differences between your product and the images in these instructions.

To install together with a new FKC102 kit: See the Mounting Instructions for FKC102.

To replace current main spring in already installed FKC102 kit: See the Workshop Manual for hlins Front Fork Cartridge Kit FKC 100-series.

arninge! The procedure requires specific tools and knowledge. If you have any questions contact an authorized hlins service center for advice.

A

B

C

D

3

MOUNTING INSTRUCTIONS

This page intentionally left blank

hlins Racing AB Box 722

S-194 27 Upplands Vsby, Sweden Phone +46 8 590 025 00

fax +46 8 590 025 80

hlins Racing AB. All rights reserved. Any reprinting or unauthorized use without the written permission of hlins Racing AB is prohibited.

hlins products are subject to continuous improvement and development, therefore, although these instructions include the most up-to-date information available at the time o

Manualsnet FAQs

If you want to find out how the 886601 Öhlins works, you can view and download the Öhlins 886601 Fork Spring Mounting Instructions on the Manualsnet website.

Yes, we have the Mounting Instructions for Öhlins 886601 as well as other Öhlins manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Mounting Instructions should include all the details that are needed to use a Öhlins 886601. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Öhlins 886601 Fork Spring Mounting Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Öhlins 886601 Fork Spring Mounting Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Öhlins 886601 Fork Spring Mounting Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Öhlins 886601 Fork Spring Mounting Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Öhlins 886601 Fork Spring Mounting Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.