Öhlins 3502008 Cancellation Kit Mounting Instructions PDF

Download download
Öhlins 3502008 Cancellation Kit Mounting Instructions PDF
Öhlins Manual Öhlins Cancellation Kit Manual Öhlins 3502008 Manual Öhlins Cancellation Kit Mounting Instructions
Pages 6
Year 2016
Language(s)
English en
1 of 6
1 of 6

Summary of Content for Öhlins 3502008 Cancellation Kit Mounting Instructions PDF

Page 1

Cancellation kit PASM, Porsche 987

35020-08 Mounting Instructions

Note! Please note that this image is a general representation of the product and may differ slightly from your product.

Kit Contents

Description Part No Pcs

Cables ties 4,8x290 4 Cable ties 3,5x190 6 Holder plate front 1 Holder plate rear 2

Connector 4

Pin contact 8 Heat shrink 4 Screw M4x8 8 Screw M4x5 8 Nut M6 1 Screw M6 2 Cancellation kit (350 mm) 1 Cancellation kit (1000 mm) 3

Page 2

2/6

MOUNTING INSTRUCTIONS

150 mm / 5,9 inch

1)

2 Remove 15 mm / 0,6 inch of the cable insulation and 4-5 mm / 0,16 - 0,2 inch of the wire insulation. Attach the heat shrink tube.

0,5 mm

2)

Preparation:

1 Cut off 150 mm / 5,9 inch of the standard damper control cable.

3 Install the supplied pin contact with a correct tool.

4 Insert the completted wire into the connector until to the lock. After this lock the connector and move the heat shrink tube to the middles of the connector / the wire and heat it. The pinposition / cable colour is not relevant.

arning! It is advisable to have an hlins dealer install the cancellation kit.

arning! If working on a raised vehicle, ensure it is securely supported.

Page 3

3/6

MOUNTING INSTRUCTIONS Front axle:

5 Install the cancellation kits with the supplied M4 screws on the holder plate.

6 Install the cancellation kit and the holder with the supplied screws and a stopp nut in the vehicle. The assembly position is beside the battery.

Caution! The cancellation kit gets very hot! All attached lines within a distance of 2 cm / 0,8 inch have to be removed further away from the kit.

M4x8

350 mm 1000 mm

Page 4

4/6

MOUNTING INSTRUCTIONS Front axle:

7 Run the standard damper control wire with adapter to the cancellation kit connector. Insert the standard connector into the cancellation kit connector until it locks. Fix the wire with cable ties.

Right vehicle side

Left vehicle side

Page 5

5/6

MOUNTING INSTRUCTIONS

Left vehicle side

Rear axle:

8 Install the cancellation kit and the holder on the standard screws of the rear lights. The assembly position is under the convertible top.

Caution! The cancellation kit gets very hot! All attached lines within a distance of 2 cm / 0,8 inch have to be removed further away from the kit.

Right vehicle side

Page 6

hlins Racing AB Box 722

S-194 27 Upplands Vsby, Sweden Phone +46 8 590 025 00

fax +46 8 590 025 80

hlins Racing AB. All rights reserved. Any reprinting or unauthorized use without the written permission of hlins Racing AB is prohibited.

hlins products are subject to continuous improvement and development, therefore, although these instructions include the most up-to-date information available at the time of printing, minor updates may occur.

To find the latest information contact an hlins distributor.

Please contact hlins if you have any questions regarding the

contents in this document.

Manualsnet FAQs

If you want to find out how the 3502008 Öhlins works, you can view and download the Öhlins 3502008 Cancellation Kit Mounting Instructions on the Manualsnet website.

Yes, we have the Mounting Instructions for Öhlins 3502008 as well as other Öhlins manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Mounting Instructions should include all the details that are needed to use a Öhlins 3502008. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Öhlins 3502008 Cancellation Kit Mounting Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Öhlins 3502008 Cancellation Kit Mounting Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Öhlins 3502008 Cancellation Kit Mounting Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Öhlins 3502008 Cancellation Kit Mounting Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Öhlins 3502008 Cancellation Kit Mounting Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.