Norbar EVOTORQUE Battery Tool 34469 Torque Quick Reference Guide PDF

Download download
Norbar EVOTORQUE Battery Tool 34469 Torque Quick Reference Guide PDF
Norbar Manual Norbar Torque Manual Norbar EVOTORQUE Battery Tool Manual Norbar 34469 Manual Norbar Torque Quick Reference Guide
Pages 2
Year 0
Language(s)
English en
1 of 2
1 of 2

Summary of Content for Norbar EVOTORQUE Battery Tool 34469 Torque Quick Reference Guide PDF

Page 1

NORBAR TORQUE TOOLS LTD, Wildmere Road, Banbury, Oxfordshire, OX16 3JU, UNITED KINGDOM

Tel: + 44 (0)1295 753600

Email: enquiry@norbar.com | Website: www.norbar.com

IMPORTANT: IT IS VITAL THAT THE SAFETY INFORMATION IN THE OPERATORS MANUALS (34464, 34466 AND 34468) HAS BEEN READ AND FULLY UNDERSTOOD BEFORE USING THIS TOOL.

IMPORTANT: TO RUN TOOL PRESS TRIGGER (A) AND SAFE TO START BUTTON (A), IF FITTED, SIMULTANEOUSLY AS DEMONSTRATED ABOVE

The instructions below are a brief guide for reference only, do not operate the tool before you have read and understood the Operators Manual supplied with the tool.

1. Ensure that the correct socket has been fitted to the tool. To fit a socket, first slide the socket over the tools square drive ensuring the sockets pin hole and the square drive pin hole line up. Then slot the holding pin through the hole and place the retaining ring over the holding pin to secure.

2. Lightly press the main trigger until the display turns on

3. Ensure the Clockwise/Counter-clockwise display arrow shown on screen is correct.

Press to change direction (if required).

QUICK REFERENCE GUIDE

EVOTORQUE BATTERY TOOL (EBT)

Part Number 34469 | Issue 4 | Original Instructions (English)

See step 7 

Page 2

NORBAR TORQUE TOOLS LTD, Wildmere Road, Banbury, Oxfordshire, OX16 3JU, UNITED KINGDOM

Tel: + 44 (0)1295 753600

Email: enquiry@norbar.com | Website: www.norbar.com

4. Ensure displayed Torque Target is correct. Target will be remembered from the last use.

To quickly alter the target shown press and hold either the up or down arrows and press to confirm.

To change targets press the button to exit the run screen and bring up the below menu.

Then select the targets icon (highlighted above) and press to confirm.

Use the up and down arrow keys to highlight required target and press to enter target setup.

Alter the targets value using the up and down arrows and confirm by pressing .

Then press the button twice to return to the run screen.

5. Rotate the handle into a convenient position relative to the reaction bar. Fit the tool onto the fastener to be tightened with the reaction bar adjacent to the reaction point.

NOTE: The wrench/socket should be engaged to the full depth of the nut/bolt to transmit maximum torque and to prevent damage from overloading the wrench and damaging the corners of the nut/bolt or socket.

IMPORTANT: BE AWARE OF HAND AND FINGER PLACEMENT, AVOID ALL OPERATION HAZARDS WHEN POSITIONING OR USING EQUIPMENT.

6. Adopt a posture to counteract normal or unexpected movement of the tool due to reaction forces.

7. To run tool press trigger and safe to start button, if fitted, simultaneously (as

demonstrated overleaf) to slowly bring reaction bar into contact with the reaction point. The safe to start button is only required to start the tool, not for continued running. IMPORTANT: BRINGING THE REACTION BAR INTO CONTACT AT SPEED CAN

LEAD TO INCREASED OPERATOR DANGER, FASTENER DAMAGE, REACTION POINT DAMAGE AND TORQUE INACCURACIES, ESPECIALLY ON HIGH TORQUE RATE JOINTS.

8. Once the reaction bar is safely in place release both the safe to start button and trigger and

wait for half a second.

9. Fully press trigger (and safe to start button if fitted), keep trigger fully pressed until tool stops, then release trigger.

TIP: If you are unable to remove the EBT from the application after tightening this is likely caused by residual torque between the tool and bolt. Enabling Relax Mode in the tools menu automatically reverses the tool following joint completion until the tool is free or the trigger released, minimising chance of fastener and reaction locking in place.

10. Press to return to the run screen.

Manualsnet FAQs

If you want to find out how the EVOTORQUE Battery Tool Norbar works, you can view and download the Norbar EVOTORQUE Battery Tool 34469 Torque Quick Reference Guide on the Manualsnet website.

Yes, we have the Quick Reference Guide for Norbar EVOTORQUE Battery Tool as well as other Norbar manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Reference Guide should include all the details that are needed to use a Norbar EVOTORQUE Battery Tool. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Norbar EVOTORQUE Battery Tool 34469 Torque Quick Reference Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Norbar EVOTORQUE Battery Tool 34469 Torque Quick Reference Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Norbar EVOTORQUE Battery Tool 34469 Torque Quick Reference Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Norbar EVOTORQUE Battery Tool 34469 Torque Quick Reference Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Norbar EVOTORQUE Battery Tool 34469 Torque Quick Reference Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.