Norbar 34293 Tester Quick Reference Guide PDF

1 of 2
1 of 2

Summary of Content for Norbar 34293 Tester Quick Reference Guide PDF

Issue 1

01.08.2003 Part Number 34293

(English)

TTT Quick Reference Guide INITIAL USE Ensure that TD selection switch is in correct position ( ). Switch on at back panel. Track screen displayed. Press for relevant method of measurement. Press EXIT for setup. NOTE It is essential that a new TTT is charged for 3.3 hours. For AC power operation, connect power adapter. For further information on operation & applications see TTT Operators Handbook (Part number 34295).

BUTTON FUNCTIONS:-

Button Function

Track

Dial & Electronic

Click and Cam

Impulse Tool

Clutch Tool

Stall Tool

Unit selection

RESET/PRINT

PRINT/NO PRINT

Exit

MODES:

MODE Filter setting How it works. Visual representation

Track 1000 Hz Follows signal.

Dial & Electronic 500 Hz

Impulse Tool 2500 Hz

Clutch Tool 2500 Hz

Stall Tool 500 Hz

Hold highest signal until reset by user.

Click & Cam 500 Hz Hold 1st signal peak for set time, then resets.

NOTE:- the filter setting for eac h mode can be set independently. To change the filter setting , select

CURRENT SETTINGS and then MODE FREQUENCY. Choose the measurement mode that you want to set and then select a frequency. When selecting OTHER FREQUENCY the user can enter a filter setting that does not appear on the selection list.

SETTINGS:

FEATURE SETTINGS Language 11 Language choices . Password Any 6 characters. (Factory set to 000000). Frequency Variable, 100Hz to 2500Hz. Auto Reset Hold Time 1 / 2 / 3 / 4 seconds. First Peak Sensitivity HIGH (2.5% of reading) / MEDIUM (5% of reading) / LOW (10% of reading) Units N.m, dN.m, cN.m, lbf.ft, lbf.in, ozf.in, ft.lb, in.lb, in.oz, kgf.m, kgf.cm, gf.m ,gf.cm Power Down Time 1 TO 99 minutes. Set to 0 (zero) to disable. Limits Variable, set by user in set up menu.

TROUBLESHOOTERS GUIDE

1. Zero does not function in track mode Transducer overstrained. Return to Norbar.

2. Measurement modes do not function correctly. Ensure that TRIGGER FROM setting is not too high.

3. Battery only powers TTT for a short time. Battery pack may need replacing (see handbook)

4. Serial data output is not communicating with other equipment. Check that control word on TTT and data equipment match. Check baud rate is set to the same as data equipment. See handbook.

5. Serial data output is overwritten. Printer may need line feed enable via menus SETUP CURRENT SETTINGS - SERIAL PORT

6. Serial data output too fast. Printer too slow. Slow down TTT by changing line delay using menus listed above.

7. Display shows SMART TD NOT INITIALISED. i) Transducer lead has a broken connection. ii) Unmodified transducer plugged in. iii) SMART transducer lost memory; return to Norbar.

8. Menu 82. CLOCK NOT INITIALISED displayed when power on. Back up battery has f

Manualsnet FAQs

If you want to find out how the 34293 Norbar works, you can view and download the Norbar 34293 Tester Quick Reference Guide on the Manualsnet website.

Yes, we have the Quick Reference Guide for Norbar 34293 as well as other Norbar manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Reference Guide should include all the details that are needed to use a Norbar 34293. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Norbar 34293 Tester Quick Reference Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Norbar 34293 Tester Quick Reference Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Norbar 34293 Tester Quick Reference Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Norbar 34293 Tester Quick Reference Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Norbar 34293 Tester Quick Reference Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.