Norbar HandTorque 34269 Multiplier Tool Operator's Manual PDF

1 of 39
1 of 39

Summary of Content for Norbar HandTorque 34269 Multiplier Tool Operator's Manual PDF

OPERATORS MANUAL

HANDTORQUE MULTIPLIERS

Part Number 34269 | Issue 12 | Original Instructions (English/Deutsch) Norbar Torque Tools Ltd 2022

NORBAR TORQUE TOOLS LTD

Wildmere Road, Banbury, Oxfordshire, OX16 3JU

UNITED KINGDOM Tel + 44 (0)1295 270333

Email enquiry@norbar.com

For the most up-to-date version of the Operators Manual, please scan the

QR code below.

www.norbar.com

To find your local Norbar company or

distributor, please scan the QR code below.

Fr die aktuellste Version der Bedienungsanleitung

scannen Sie bitte den untenstehenden QR-Code.

Um Ihr lokales Norbar- Unternehmen oder Ihren Hndler zu finden, scannen Sie bitte den

untenstehenden QR-Code.

For the most up-to-date version of the Operators Manual please visit http://www.norbar.com/Portals/0/NorbarProducts/operators_handbook/34269ENDE.pdf

Pour obtenir la version la plus rcente du manuel technique, veuillez vous rendre sur www.norbar.com/Portals/0/NorbarProducts/operators_handbook/34269FR.pdf

Besuchen Sie die Webseite www.norbar.com/Portals/0/NorbarProducts/operators_handbook/34269ENDE.pdf, um die aktuellste Version der Bedienungsanleitung zu erhalten.

Per la versione pi aggiornata del manuale di istruzioni, visitare il sito www.norbar.com/Portals/0/NorbarProducts/operators_handbook/34269IT.pdf

Para la mayora de las versiones ms actuales del manual de funcionamiento, visite www.norbar.com/Portals/0/NorbarProducts/operators_handbook/34269ES.pdf

, , www.norbar.com/Portals/0/NorbarProducts/operators_handbook/34269RU.pdf

1

CONTENTS Part Numbers Covered by This Manual 2 Standard Series 2 Small Diameter Series 2 HT4 Series 2 Compact Series 2 Optional Extras 2 Safety 3 Introduction 3 Operating Instructions 4 Torque Reaction 5 Setting Torque for Bolt Tightening (Non-Calibrated) 8 Setting Torque for Bolt Tightening (Calibrated) 8 Setting Torque for Bolt Loosening 9 Operating the Multiplier 9 Anti Wind-Up Ratchet 10 Purpose of the Anti Wind-Up Ratchet 10 Operation of the Anti Wind-Up Ratchet 10 Maintenance 12 Output Square Drive 12 Cleaning 12 Specifications 13 Standard Series 13 Small Diameter Series 14 HT4 Series 14 Compact Series 14 Trouble Shooting 15

2

PART NUMBERS COVERED BY THIS MANUAL This manual covers the setup and use of Norbar HandTorque multipliers. Standard Series

Model Maximum Torque

Part Number Without AWUR With AWUR

HT 1 & HT 2 1700 Nm 16010, 16012.HD, 16030.HD, 16034.HD 16088, 16089.HD HT 5 & HT 6 3400 Nm 16014, 16028, 16064, 16016, 16024 16090, 16092, 16093

HT 7 6000 Nm 16018, 16067 16065, 16068 HT 9 9500 Nm 16059 16070, 16071 HT 11 20000 Nm 16082 16049 HT 13 47500 Nm - 16053

Small Diameter Series

Model Maximum Torque Part Number

Without AWUR With AWUR HT 30 3000 Nm 18003, 18007 18004, 18006 HT 60 6000 Nm 18009, 18013 18008

HT4 Series

Model Maximum Torque Part Number

Without AWUR With AWUR HT 4 3000 Nm - 17022 HT 4 4500 Nm - 17021

Compact Series

Model Maximum Torque

Part Number Without AWUR With AWUR

HT-52 & HT-72 1000 Nm 180200, 180201, 180202 180203, 180204, 180205, 180206

HT-72 1500 Nm 180208, 180209 - HT-72 2000 Nm 180210, 180212 180214 HT-92 4000 Nm - 180215

HT-119 7000 Nm - 180216 HT-52 (HandTorque Kit) 1000 Nm - 18196 HT-72 (HandTorque Kit) 2000 Nm - 18198 HT-92 (HandTorque Kit) 4000 Nm - 18199

AWUR = Anti Wind Up Ratchet. NOTE: For more information on HandTorque Kits, see page 9. Optional Extras

A range of Sockets, Nose Extensions and Annular Torque Transducers are available to suit the HandTorque range.

3

SAFETY IMPORTANT: DO NOT OPERATE THE TOOL BEFORE READING THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY OR DAMAGE TO THE TOOL. This tool is intended for use with threaded fasteners. Any other use is not recommended. These tools require a reaction bar. See section on torque reaction.

There is a risk of crushing between the reaction bar and work piece. Keep hands away from reaction bar. Keep hands away from tool output.

INTRODUCTION The HandTorque multiplier is a precision tool that will multiply the input torque by the specified ratio. The HandTorque multiplier is a planetary gear system. The outer case of the multiplier, known as the annulus, will rotate in the opposite direction to the input torque unless a reaction arm is fitted to the annulus. Without the reaction arm no torque is applied through the square drive. See section on torque reaction (Page 5) for more details. HandTorque multipliers with a high ratio gearbox (15:1 or more) require a certain amount of windup (backlash) to be taken up before any useful tightening work is applied to the nut. In this instance an Anti Wind-Up Ratchet (AWUR) is fitted to retain all of the wind up forces. See section on AWUR (Page 10 11) for more details.

4

REACTION PLATE

REACTION PLATE

REACTION PLATE

REACTION PLATE

OPERATING INSTRUCTIONS To operate the HandTorque multiplier you will need the following:-

Power Drive or Impact Quality Sockets.

Reaction Arm.

Norbar or other quality torque wrench.

Standard Series Small Diameter Series

HT4 Series Compact Series

FIGURE 1

INPUT SQUARE DRIVE

INPUT SQUARE DRIVE

INPUT SQUARE DRIVE

INPUT SQUARE DRIVE

ANTI WIND-UP RATCHET

ANTI WIND-UP RATCHET

ANTI WIND-UP RATCHET

ANTI WIND-UP RATCHET

OUTPUT SQUARE DRIVE OUTPUT SQUARE DRIVE

OUTPUT SQUARE DRIVE

OUTPUT SQUARE DRIVE

SLAVE SQUARE

5

Torque Reaction When the HandTorque is in operation, the Reaction Plate rotates in the opposite direction to the Output Square Drive and must be allowed to rest squarely against a solid object or surface adjacent to the bolt to be tightened (see Figure 2). Where the standard reaction plate is not suitable, it may be possible to adapt it. Refer to your Norbar distributor for advice.

Clockwise Operation Counter-Clockwise Operation

Clockwise Operation Counter-Clockwise Operation

FIGURE 2

Reaction

Reaction

Reaction

Reaction

Torque Torque

Torque Torque

6

IMPORTANT: CARE MUST BE TAKEN TO ENSURE THAT THE REACTION PLATE IS ONLY USED WITHIN THE LIMITATIONS SHOWN IN FIGURES 3, 4, 5 AND 6.

For special applications or where extra deep sockets must be used the standard arm may be extended but only within the limitations shown in Figures 3, 4, 5 and 6.

WARNING: FAILURE TO OBSERVE THE LIMITATIONS SHOWN IN FIGURES 3, 4, 5 AND 6 WHEN MODIFYING STANDARD REACTION PLATES OR MAKING SPECIALS MAY RESULT IN PREMATURE WEAR OR DAMAGE TO THE MULTIPLIER OUTPUT DRIVE.

Standard square drive extensions MUST NOT be used as these will cause serious damage to the wrench output drive. Norbar manufacture a range of nose extensions for applications where access is restricted and these are designed to support the final drive correctly. It is essential the reaction bar rests squarely against a solid object or surface adjacent to the fastener to be tightened, with reaction taken at the end of the reaction bar. The supplied reaction bar has been designed to give an ideal reaction point when used with a standard length socket. If an extra long socket is used it may move the reaction bar outside the safe reaction window, as shown in figures 3, 4, 5 and 6. The standard reaction bar may need to be extended to ensure it remains wholly within the shaded area.

FIGURE 3 Standard Series Safe Reaction Window

Torque Reaction should be taken in the shaded areas only

Standard Length Socket Extra Length Socket

FIGURE 4 Small Diameter Series Safe Reaction Window

Torque Reaction should be taken in the shaded areas only

Standard Length Socket Extra Length Socket

7

Standard Length Socket Extra Length Socket

Torque Reaction should be taken in the shaded areas only

FIGURE 5 HT 4 Series Safe Reaction Window

FIGURE 6 Compact Series Safe Reaction Window

Standard Length Socket Extra Length Socket

Torque Reaction should be taken in the shaded areas only

8

Setting Torque for Bolt Tightening (Non-Calibrated) 1. Establish the correct torque figure for the bolt from manufacturers instructions or by calculation. A

torque tension calculator is available on the Norbar website (www.norbar.com), which can be used as a guide to help calculate the tension generated in a bolt for a given thread size, torque and friction value.

NOTE: Many factors have an effect on the torque/induced load relationship and care should be

taken to consider factors such as surface finish and amount/type of lubrication. In critical applications, the relationship between torque and induced load should be determined by experimentation with the actual components and lubrication used.

2. Divide the required torque by the Multiplication factor of the multiplier (See Specifications section, page

13). This gives the input torque.

Example: A HandTorque HT 1 has a Multiplication ratio of 5.2:1, so for an input torque of 1 Nm there is an output torque of 5.2 Nm, with a +/- 4% tolerance. To reach the HandTorque HT 1 maximum output torque of 1,700 Nm the below calculation is made:

1,700 (Required Torque) = 327 Nm (Input Torque)

5.2 (Multiplication Factor) 3. Select a suitable torque wrench for the input torque. The wrench should be of high quality and regularly

calibrated. Setting Torque for Bolt Tightening (Calibrated) This section only applies to HandTorques that are supplied with a Certificate of Calibration (see Figure 7). The following part numbers come with a Certificate of Calibration; 180200, 180201, 180202, 180203, 180204, 180205, 180206, 180208, 180209, 180210, 180212, 180214, 180215, 180216, 18196, 18198 and 18199. 1. Establish the correct torque figure for the bolt from manufacturers instructions or by calculation. A

torque tension calculator is available on the Norbar website (www.norbar.com), which can be used as a guide to help calculate the tension generated in a bolt for a given thread size, torque and friction value.

NOTE: Many factors have an effect on the torque/induced load relationship and care should be

taken to consider factors such as surface finish and amount/type of lubrication. In critical applications, the relationship between torque and induced load should be determined by experimentation with the actual components and lubrication used.

9

2. Divide the required torque by the Multiplication factor of the

multiplier as stated on the Calibration Certificate included with the HandTorque. This gives the input torque.

NOTE: Calibrated HandTorques come with a unique

Calibration Certificate which highlights the HandTorques unique Multiplication Ratio. These HandTorques will have a slight variation in the gearbox ratio, so for more accurate results the ratio on the Calibration Certificate will need to be used.

Norbar multipliers are engineered such that each gear stage has a specific velocity ratio. For example; a 25:1 gearbox has 2 stages each with a velocity ratio of 5.45:1, giving an overall velocity ratio of 29.75:1. Taking the gearbox efficiency into account the multiplication factor will give a ratio of around 25:1. Torque output calculations are therefore a matter of simple arithmetic with little risk of incorrect bolt loading due to conversion errors. Other manufacturers multipliers often require graphs or formulae to calculate the input torque to achieve a particular output. Example: The HandTorque HT-92 Certificate of Calibration in

Figure 7 displays a multiplication ratio of 24.21:1, meaning that for every 1 Nm of input, 24.21 Nm are output, with a +/- 4% tolerance. To reach the HandTorque HT-92 maximum output torque of 4,000 Nm, the below calculation is made:

4,000 (Required Torque) = 165 Nm (Input Torque)

24.21 (Multiplication Factor) 3. Select a suitable torque wrench for the input torque. The wrench should be of high quality and regularly

calibrated. The HT 52, 72 and 92 Compact Series models can also come as part of a kit which includes a Norbar NorTorque Torque Wrench and Carry Case. The table below details the range of HandTorque Kits available:

Kit Part Number

Kit Contents HandTorque Multiplier NorTorque Torque Wrench

18186 HT-52 (18196) MDL 60 Dual Scale (130101) 18192 HT-72 (18198) MDL 100 Dual Scale (130103) 18195 HT-92 (18199) MDL 200 Dual Scale (130104)

The HandTorque Kit has a combined accuracy of +/- 6.5%. This is taken from a combination of the +/- 3% NorTorque Torque Wrench tolerance and the working variation of the HandTorque gearbox. NOTE: The accuracy of +/- 6.5% is only valid provided the multiplication ratio on the Calibration

Certificate is used and reaction is taken within the parameters demonstrated in Figure 6. Setting Torque for Bolt Loosening 1. To ensure that the multiplier is not overloaded, it is desirable to use a torque wrench even for bolt

loosening. 2. Divide the multiplier maximum output by the Multiplication factor. This gives the maximum input torque. 3. Select a suitable torque wrench for the input torque.

FIGURE 7 Certificate of Calibration Supplied with Compact Series (see above

for applicable models).

24.21:1

10

NOTE: Some torque wrenches will not be active (click or 'break') when used in the counter- clockwise direction.

Operating the Multiplier 1. Fit the multiplier with the correct size of power drive or impact quality socket to suit the bolt to be tightened. 2. Fit the multiplier to the bolt with the reaction plate adjacent to the reaction point. See Figure 2. 3. Fit the torque wrench to the multiplier, set as in 'Setting Torque for Bolt Tightening'. 4. Operate the torque wrench in the normal manner until it 'clicks' or 'breaks'. Smooth and even use of the

torque wrench will give more accurate results. TIP: For extra accuracy a torque transducer can be used to measure the input or output torque.

11

ANTI WIND-UP RATCHET Purpose of the Anti Wind-Up Ratchet (AWUR)

Most multipliers with ratios of 15:1 and over are fitted with an anti wind-up ratchet. The multiplier can be thought of as a spring which must be fully wound before any tightening/untightening work can be applied to the bolt. The AWUR ensures that the 'spring' stays wound and that any further torque input to the multiplier is applied directly to the bolt. Familiarise yourself with the tool by initially applying low torques and removing wind-up. There are two different types of AWUR that your HandTorque may be equipped with as demonstrated below in Figure 8. The AWUR shown on the left side of the page requires a hexagon key to lock in to the neutral position. The AWUR on the right side of the page will automatically lock into the neutral position without the need for a hexagon key. Operation of the Anti Wind-Up Ratchet Please Read Carefully 1. Position the ratchet direction selector for the appropriate direction of operation:

Test direction of rotation and ensure that the ratchet operates freely.

Or CW = Clockwise

Or CCW = Counter-Clockwise

Or N = Neutral

WARNING: DO NOT USE TOOL IF RATCHET DOES NOT OPERATE FREELY.

Clockwise Operation / Bolt Tightening

Neutral Position:

Centralise the ratchet direction selector. Depending on model type this may need locking into position using a hexagon key. Check that the

input square rotates freely in both directions before operation.

Counter-Clockwise Operation / Bolt Loosening

FIGURE 8

12

2. To apply torque, follow the instructions given earlier for setting and operating of the multiplier. Set the direction of operation for the Anti Wind-Up ratchet as shown in Figure 8.

3. To remove the multiplier, carefully load the gearbox until the ratchet direction selector can be moved

towards the neutral position. Allow the wrench to rotate slowly counter-clockwise until the multiplier becomes free.

3.1 Load the torque wrench.

FIGURE 9

3.2 With the wrench still loaded, move the ratchet direction selector to counter-clockwise:

FIGURE 10 3.3 Allow the torque wrench to rotate slowly until the multiplier becomes free.

FIGURE 11 If wind-up cannot be released with one sweep of the wrench, re-engage the ratchet by pushing the ratchet direction selector back to the clockwise position. Reposition the wrench and follow procedure 3 until the wind-up is fully released. 4. The tool may now be removed from the fastener.

5. Familiarise yourself with this tool by initially applying low torques and removing wind-up. We recommend that the Anti Wind up assembly input gear and ratchet teeth are inspected annually by your Norbar approved distributor for wear or damage.

13

MAINTENANCE Output Square Drive The only user maintenance required on HandTorque multipliers is the replacement of drive squares, should they become damaged. To avoid internal damage (especially due to torque overload), the output drive square / shaft have been designed to shear first. This saves major internal damage and allows easy square removal. In some instances the square drive will not be removable without disassembling the gearbox. In these cases the HandTorque multiplier should be returned to Norbar or a Norbar approved agent for repair. However, in many cases the square drive can be replaced without disassembling the gearbox. In these cases remove the bolt holding the drive square in position (bolt will be either M4 or M5). Then remove the broken / damaged drive square. Fit the new drive square. Fit the new bolt and tighten (4.7 Nm for M4 bolts and 9 Nm for M5 bolts)

FIGURE 12 Any other maintenance or repairs should be carried out by Norbar or a Norbar approved agent and should form part of a service. Service intervals will depend on the type of usage of the tools and the environment in which they are being used. Cleaning Keep the tool in a clean condition to aid safety. Do not use abrasives or solvent based cleaners.

14

SPECIFICATIONS Standard Series

Model Part Number

Maximum Torque Output Ratio

Input Square

Output Square

Nm lbfft In in HT 1/516010170012505.2:1

HT 2/5 HD 16012.HD 1700 1250 5.2:1 1 HT 2/5 HD 16030.HD 1700 1250 5.2:1 1 HT 2/25 HD 16034.HD 1700 1250 27:1 1

HT 2/25 AWUR 16088 1700 1250 27:1 HT 2/25 AWUR HD 16089.HD 1700 1250 27:1 1

HT 5/516014340025005.2:11 HT 5/25160283400250027:11 HT 5/125 16064 3400 2500 135:1 1

HT 5/25 AWUR160903400250027:11 HT 6/516016340025005.2:11

HT 6/25160243400250027:11 HT 6/25 AWUR160923400250027:11 HT 6/125 AWUR1609334002500135:11

HT 7/516067600044255.2:11 HT 7/25160186000442527:11

HT 7/25 AWUR160656000442527:11 HT 7/125 AWUR 1606860004425135:11

HT 9/25 160599500700027:11 HT 9/25 AWUR 160709500700027:11 HT 9/125 AWUR 1607195007000135:11

HT 11/25 16082200001470027:12 HT 11/125 AWUR 160492000014700135:12 HT 13/125 AWUR 160534750035000135:12

15

Small Diameter Series

Model Part Number

Maximum Torque Output Ratio

Input Square

Output Square

Nm lbfft in in HT 30/5 18003 3000 2200 5.2:1 1

HT 30/15 AWUR 18004 3000 2200 15:1 1 HT 30/25 AWUR 18006 3000 2200 27:1 1

HT 30/25 18007 3000 2200 27:1 1 HT 60/25 AWUR 18008 6000 4425 27:1 1

HT 60/25 18009 6000 4425 27:1 1 HT 60/125 18013 6000 4425 135:1 1

HT4 Series

Model Part Number

Maximum Torque Output Ratio

Input Square Output Square Nm lbfft in in

HT4/15.5 17022 3000 2200 15.5:1 1 HT4/26 17021 4500 3300 26:1 1

Compact Series

Model Part Number

Maximum Torque Output Ratio

Input Square Output Square Nm lbfft in In

HT-52/4.7 180200 1000 740 4.7:1 HT-52/22.2 180201 1000 740 22.2:1 HT-52/22.2 180202 1000 740 22.2:1

HT-52/22.2 AWUR 180203 1000 740 22.2:1 HT-52/22.2 AWUR 180204 1000 740 22.2:1 HT-52/22.2 AWUR 180205 1000 740 22.2:1 1 HT-52/22.2 AWUR 180206 1000 740 22.2:1 1

HT-72/5.2 180208 1500 1100 5.2:1 1 HT-72/5.2 180209 1500 1100 5.2:1 HT-72/5.2 180210 2000 1450 5.2:1 1 HT-72/27 180212 2000 1450 27:1 1

HT-72/27 AWUR 180214 2000 1450 27:1 1 HT-92/25 AWUR 180215 4000 2950 25:1 1

HT-119/25.5 AWUR 180216 7000 5100 25.5:1 1 HT-52 (HandTorque Kit) 18196 1000 740 22.2:1 HT-72 (HandTorque Kit) 18198 2000 1450 27:1 1 HT-92 (HandTorque Kit) 18199 4000 2950 25:1 1

NOTE: Some of the ratios in the above table are a rough guide only, for more accurate results

please refer to the multiplication ratio on your Certificate of Calibration provided with your HandTorque (see page 8).

16

TROUBLESHOOTING The following is only a guide, for more complex faults please contact your local Norbar agent or Norbar directly.

Problem Likely Solutions

Drive square sheared See maintenance section.

Input drive rotates but output will not

- Check AWUR change lever is not in neutral position.

- Remove drive square and check if sheared (See

maintenance section).

- Serious damage to internal gears, return to Norbar or agent for repair.

Input drive will not rotate Check AWUR change lever is in the correct position.

17

NOTES

0

BEDIENUNGSANLEITUNG

HANDTORQUETM DREHMOMENTVERVEILFTIGER

Teilenummer 34269 | Ausgabe 12 | bersetzung Der Originalanleitung (Deutsch)

1

INHALT Teilenummern, fr die diese Bedienungsanleitung gilt 2 Standard Serien 2 Serien Fr Kleine Durchmesser 2 HT4 Serien 2 Compact Serien 2 Optionales Zubehr 2 Sicherheit 3 Einleitung 3 Betrieb 4 Absttzvorrichtung 5 Drehmoment zum Schraubenanziehen einstellen (Nicht Kalibriert) 8 Drehmoment zum Schraubenanziehen einstellen (Kalibriert) 8 Drehmoment zum Schraubenlsen einstellen 10 Vervielfltiger bedienen 10 Ratsche Mit Rcklaufsperre 11 Zweck der Ratsche mit Rcklaufsperre 11 Betrieb der Ratsche mit Rcklaufsperre 11 Wartung 13 Abriebsvierkant 13 Reinigung 13 Technische Daten 14 Standard Serien 14 Serien Fr Kleine Durchmesser 15 HT4 Serien 15 Compact Serien 15 Fehlersuche 16

2

TEILENUMMERN, FR DIE DIESE BEDIENUNGSANLEITUNG GELTEN Diese Bedienungsanleitung beschreibt die Installation und den Gebrauch der Norbar HandTorque Drehmomentverfielfltiger. Standard - Serien

Modell Maximal Drehmoment

Teile - Nr Ohne RAS Mit RAS

HT 1 & HT 2 1700 Nm 16010, 16012.HD, 16030.HD, 16034.HD 16088, 16089.HD HT 5 & HT 6 3400 Nm 16014, 16028, 16064, 16016, 16024 16090, 16092, 16093

HT 7 6000 Nm 16018, 16067 16065, 16068 HT 9 9500 Nm 16059 16070, 16071

HT 11 20000 Nm 16082 16049 HT 13 47500 Nm - 16053

Serien Fr Kleine Durchmesser

Modell Maximal Drehmoment

Teile - Nr Ohne RAS Mit RAS

HT 30 3000 Nm 18003, 18007 18004, 18006 HT 60 6000 Nm 18009, 18013 18008

HT4 - Serien

Modell Maximal Drehmoment

Teile - Nr Ohne RAS Mit RAS

HT 4 3000 Nm - 17022 HT 4 4500 Nm - 17021

Compact Serien

Modell Maximal Drehmoment

Teile - Nr Ohne RAS Mit RAS

HT-52 & HT-72 1000 Nm 180200, 180201, 180202 180203, 180204, 180205, 180206

HT-72 1500 Nm 180208, 180209 - HT-72 2000 Nm 180210, 180212 180214 HT-92 4000 Nm - 180215

HT-119 7000 Nm - 180216 HT-52 (HandTorque Kit) 1000 Nm - 18196 HT-72 (HandTorque Kit) 2000 Nm - 18198 HT-92 (HandTorque Kit) 4000 Nm - 18199

RAS = Rcklaufsperre HINWEIS: Weitere Informationen ber HandTorque-Stze siehe Seite 9. Optionales Zubehr Fr diese HandTorque Produktreihe ist eine Vielzahl an Verlngerungsstcken und ringfrmigen Mewertgebern erhltlich.

3

SICHERHEIT WICHTIG: DIESES WERKZEUG DARF NUR BETRIEBEN WERDEN, WENN ZUVOR DIESE

BEDIENUNGSANLEITUNG GELESEN UND VERSTANDEN WURDE. BEI NICHTBEACHTUNG BESTEHT DIE GEFAHR VON PERSONEN-UND SACHSCHDEN

DURCH DAS WERZEUG. Dieses Werkzeug darf nur fr Befestigungsmittel mit Gewinde verwendet werden. Ein anderweitiger Gebrauch ist nicht zulssig. Diese Werkzeuge bentigen eine Absttzvorrichtung. Nheres dazu finden Sie im Abschnitt Absttzvorrichtung.

Zwischen der Absttzvorrichtung und dem Werkstck besteht Quetschgefahr. Hnde immer von der Absttzvorrichtung fernhalten. Hnde immer vom Werkzeugansatz fernhalten.

EINLEITUNG Der handgefhrte Drehmomentvervielfltiger ist ein Przisionswerkzeug mithilfe dessen das Eingangsdrehmoment exakt gem dem spezifizierten Verhltnis vervielfltigt wird. Der HandTorque Drehmomentvervielfltiger ist ein Planetengetriebesystem. Das uere Gehuse des Drehmomentvervielfltigers, das auch Kranz genannt wird, rotiert in entgegengesetzter Richtung des Eingangsdrehmoments, auer die Absttzvorrichtung wurde am Kranz montiert. Ohne die Absttzvorrichtung wird kein Drehmoment ber den Antriebsvierkant ausgebt. Weitere Informationen hierzu finden Sie im Abschnitt Absttzvorrichtung (Seite 5). HandTorque Drehmomentvervielfltiger mit einem hohen Untersetzungsverhltnis (25:1 oder mehr) bentigen eine groe Spannung (Backlash), die aufgebaut werden muss, bevor die Anschraubung von Schrauben beginnen kann. In diesem Fall wurde eine Ratsche mit Rcklaufsperre (RAS) eingebaut, um die Anzugsspannung zu erhalten. Weitere Informationen hierzu finden Sie im Abschnitt RAS (Seite 11 12).

4

ABSTTZVORRICHTUNG ABSTTZVORRICHTUNG

ABSTTZVORRICHTUNG ABSTTZVORRICHTUNG

BETRIEB Zum Betrieb des handgefhrten Drehmomentvervielfltigers ist folgendes erforderlich:-

Kraftantrieb oder Kraft-Einsatz.

Absttzvorrichtung.

Drehmomentschlssel der Marke Norbar oder vergleichbare Qualitt eines anderen Herstellers.

Standard - Serien Serien Fr Kleine Durchmesser

HT4 - Serien Compact Serien

ABBILDUNG 1

ANTRIEBSVIERKANT ANTRIEBSVIERKANT

ANTRIEBSVIERKANT

ANTRIEBSVIERKANT

RATSCHE RCKLAUFSPERRE

RATSCHE RCKLAUFSPERRE

RATSCHE RCKLAUFSPERRE

RATSCHE RCKLAUFSPERRE

ABTRIEBSVIERKANT ABTRIEBSVIERKANT

ABTRIEBSVIERKANT ABTRIEBSVIERKANT

SEKUNDRER VIERKANT

5

Absttzvorrichtung Wenn der handgefhrte Drehmomentschlssel bettigt wird, dreht sich die Absttzvorrichtung in entgegengesetzter Richtung des Abtriebsvierkants. Die Sttze muss dann voll auf einem festen Krper oder einer festen Oberflche aufliegen, die an die zu befestigende Schraube angrenzt (siehe Abb. 2). Sollte sich die Standard-Absttzvorrichtung fr eine spezielle Anwendung nicht eignen, kann sie entsprechend angepasst werden. Fr weitere Informationen wenden Sie sich bitte an Ihren Norbar-Vertriebspartner.

Vorwrtsbetrieb Rckwrtsbetrieb

Vorwrtsbetrieb Rckwrtsbetrieb

ABBILDUNG 2

Sttzpunkt

Sttzpunkt

Sttzpunkt

Sttzpunkt

Drehmoment Drehmoment

Drehmoment Drehmoment

6

WICHTIG: ES MUSS UNBEDINGT DARAUF GEACHTET WERDEN, DASS DIE ABSTTZVORRICHTUNG NUR INNERHALB DER IN DEN ABBILDUNGEN 3, 4, 5 UND 6 GEZEIGTEN GRENZEN BETRIEBEN WIRD.

Bei Sonderanwendungen und bei Fllen, bei denen ein extra langer Steckschlssel bentigt wird, kann die Standard-Absttzvorrichtung verlngert werden. Allerdings mssen die in den Abbildungen 3, 4, 5 und 6 gezeigten Einschrnkungen eingehalten werden.

ACHTUNG: EIN NICHTBEACHTEN DER IN DEN ABBILDUNGEN 3, 4, 5 UND 6 GEZEIGTEN EINSCHRNKUNGEN BEIM MODIFIZIEREN EINER STANDARD ABSTTZVORRICHTUNG KANN ZU EINEM VORZEITIGEN VERSCHLEISS ODER ZU BESCHDIGUNGEN AM ABTRIEB DES VERVIELFLTIGERS FHREN.

Verlngerungen fr den Standardantriebsvierkant DRFEN NICHT verwendet werden, da sonst der Ausgangsantrieb des Werkzeugs ernsthaft beschdigt wird. Fr Anwendungen mit eingeschrnktem Zugang stehen eine Reihe von Ansatzverlngerungen von Norbar zur Verfgung, mit denen das Antriebsstck richtig gesttzt wird. Es ist unerlsslich, dass die Drehmomentsttze direkt an einem festen Krper oder einer festen Oberflche in der Nhe des festzuziehenden Befestigungselements anliegt, sodass die Absttzung am Ende der Drehmomentsttze erfolgt. Die mitgelieferte Drehmomentsttze wurde so entwickelt, dass sie einen idealen Sttzpunkt bietet, wenn sie mit einer Fassung in Standardlnge genutzt wird. Falls eine extra lange Fassung genutzt wird, kann dies zu einer Verlagerung der Drehmomentsttze auerhalb des sicheren Sttzfensters fhren, wie in den Abbildungen 3, 4, 5 und 6 gezeigt. Die Standarddrehmomentsttze muss ggf. verlngert werden, um sicherzustellen, dass sie vollstndig in dem farblich hervorgehobenen Bereich bleibt.

Reaktionskrfte drfen nur in den schattierten Bereichen

aufgefangen werden

ABBILDUNG 4 Serien Fr Kleine Durchmesser Sicheres Sttzfenster

Steckschlssel, normale Lnge Steckschlssel, extra lang

Reaktionskrfte drfen nur in den schattierten Bereichen

aufgefangen werden

ABBILDUNG 3 Standard - Serien Sicheres Sttzfenster

Steckschlssel, extra lang Steckschlssel, normale Lnge

7

ABBILDUNG 5 HT4 - Serien Sicheres Sttzfenster

Steckschlssel, normale Lnge Steckschlssel, extra lang

Reaktionskrfte drfen nur in den schattierten Bereichen

aufgefangen werden

ABBILDUNG 6 Compact Serien Sicheres Sttzfenster

Steckschlssel, normale Lnge Steckschlssel, extra lang

Reaktionskrfte drfen nur in den schattierten Bereichen

aufgefangen werden

8

Drehmoment Zum Schraubenanziehen Einstellen (Nicht Kalibriert) 1.Stellen Sie das korrekte Drehmoment fr die Schraube anhand der Herstellervorgaben oder durch

Berechnung ein. Ein Drehmomentrechner ist auf der Norbar Internetseite (www.norbar.com) verfgbar und dient als Orientierung fr die Berechnung des Drehmoments, der in Bolzen mit einer bestimmten Gewindegre, Drehmoment und Reibwert erzeugt wird.

HINWEIS: VIELE FAKTOREN KNNEN EINEN EINFLUSS AUF DAS VERHLTNIS ZWISCHEN DEM

DREHMOMENT UND DER INDUKTIVEN LAST HABEN UND MSSEN DAHER BERCKSICHTIGT WERDEN. ZU DIESEN FAKTOREN GEHREN AUCH DIE OBERFLCHENBESCHAFFENHEIT UND DIE MENGE/ART DES SCHMIERMITTELS. IN KRITISCHEN ANWENDUNGEN SOLLTE DAS VERHLTNIS ZWISCHEN DEM DREHMOMENT UND DER INDUKTIVEN LAST DURCH VERSUCHE MIT DEN TATSCHLICHEN KOMPONENTEN UND DEM VERWENDETEN SCHMIERMITTEL BESTIMMT WERDEN.

2. Teilen Sie das erforderliche Drehmoment durch das bersetzugsverhltnis des Vervielfltigers (Siehe

Abschnitt zu den technischen Daten auf Seite 14). Sie erhalten den Wert fr das Eingangsdrehmoment.

Beispiel: Ein HandTorque HT 1 hat ein Multiplikationsverhltnis von 5:1, das heit, bei einem Eingabe-Drehmoment von 1 Nm erhlt man ein Ausgabe-Drehmoment von 5 Nm mit einer Toleranz von +/- 4 %.

Um das maximale Ausgabe-Drehmoment des HandTorque HT 1 von 1.700 Nm zu erreichen, wird die folgende Rechnung vorgenommen:

1,700 Nm (gewnschtes Drehmoment) = 340 Nm (Eingabe-Drehmoment)

5 (Multiplikationsfaktor) 3. Whlen Sie einen geeigneten Drehmomentschlssel fr das Eingangsdrehmoment. Achten Sie darauf,

dass der Schlssel aus qualitativ hochwertigem Material besteht und regelmig kalibriert wird. Drehmoment Zum Schraubenanziehen Einstellen (Kalibriert) Dieser Abschnitt bezieht sich nur auf HandTorques, fr die ein Kalibrierungszertifikat (siehe Abbildung 7) mitgeliefert wurde. Die folgenden Teilenummern werden mit einem Kalibrierungszertifikat geliefert: 180200, 180201, 180202, 180203, 180204, 180205, 180206, 180208, 180209, 180210, 180212, 180214, 180215, 180216, 18196, 18198 und 18199. 1. Stellen Sie das korrekte Drehmoment fr die Schraube anhand der Herstellervorgaben oder durch

Berechnung ein. Ein Drehmomentrechner ist auf der Norbar Internetseite (www.norbar.com) verfgbar und dient als Orientierung fr die Berechnung des Drehmoments, der in Bolzen mit einer bestimmten Gewindegre, Drehmoment und Reibwert erzeugt wird.

HINWEIS: VIELE FAKTOREN KNNEN EINEN EINFLUSS AUF DAS VERHLTNIS ZWISCHEN DEM

DREHMOMENT UND DER INDUKTIVEN LAST HABEN UND MSSEN DAHER BERCKSICHTIGT WERDEN. ZU DIESEN FAKTOREN GEHREN AUCH DIE OBERFLCHENBESCHAFFENHEIT UND DIE MENGE/ART DES SCHMIERMITTELS. IN KRITISCHEN ANWENDUNGEN SOLLTE DAS VERHLTNIS ZWISCHEN DEM DREHMOMENT UND DER INDUKTIVEN LAST DURCH VERSUCHE MIT DEN TATSCHLICHEN KOMPONENTEN UND DEM VERWENDETEN SCHMIERMITTEL BESTIMMT WERDEN.

2. Teilen Sie das erforderliche Drehmoment durch das bersetzugsverhltnis des Vervielfltigers wie auf

dem Kalibrierungszertifikat, das mit dem HandTorque geliefert wurde, angegeben ist. Sie erhalten den Wert fr das Eingangsdrehmoment.

HINWEIS: Kalibrierte HandTorques werden mit einem einzigartigen Kalibrierungszertifikat

geliefert, auf dem das einzigartige Multiplikationsverhltnis des HandTorques hervorgehoben ist. Diese HandTorques haben eine leichte Abweichung in Bezug auf die Getriebebersetzung, sodass fr genauere Ergebnisse das Verhltnis auf dem Kalibrierungszertifikat genutzt werden sollte.

9

Verstrker von Norbar wurden so entwickelt, dass jeder Getriebestufe ein bestimmtes Geschwindigkeitsverhltnis zugeordnet ist. Wenn beispielsweise ein 25:1-Getriebe 2 Stufen hat, die jeweils ein Geschwindigkeitsverhltnis von 5,45:1 aufweisen, erhlt man ein Gesamtgeschwindigkeitsverhltnis von 29,75:1. Kalkuliert man die Effizienz des Getriebes ein, ergibt der Multiplikationsfaktor ein Verhltnis von ungefhr 25:1. Berechnungen des Ausgabe-Drehmoments sind daher eine Frage einfacher Arithmetik mit einem geringen Risiko einer fehlerhaften Vorspannung des Befestigungselements aufgrund von Umwandlungsfehlern. Verstrker anderer Hersteller bentigen hufig Graphen oder Formeln, um das Eingabe-Drehmoment zu berechnen, damit ein bestimmtes Ausgabe- Drehmoment erreicht wird. Beispiel: Das Kalibrierungszertifikat des HandTorque HT-

92 in Abbildung 7 zeigt ein Multiplikationsverhltnis von 24,21:1, dies bedeutet, dass man bei einem Eingabe- Drehmoment von 1 Nm ein Ausgabe-Drehmoment von 24,21 Nm erhlt, mit einer Toleranz von +/- 4 %.

Um das maximale Ausgabe-Drehmoment des HandTorque HT-92 von 4.000 Nm zu erreichen, wird die folgende Rechnung vorgenommen:

4.000 Nm (gewnschtes Drehmoment) = 165 Nm (Eingabe-Drehmoment)

24,21 (Multiplikationsfaktor) 3. Whlen Sie einen geeigneten Drehmomentschlssel fr das Eingangsdrehmoment. Achten Sie darauf,

dass der Schlssel aus qualitativ hochwertigem Material besteht und regelmig kalibriert wird. Die Modelle HT 52, 72 und 92 der Compact Series werden auch als Teil eines Satzes geliefert, in dem ein Norbar- NorTorque-Drehmomentschraubenschlssel und ein Transportkoffer enthalten sind. In der folgenden Tabelle wird die Auswahl an verfgbaren HandTorque-Stzen im Einzelnen aufgefhrt:

Teilenummer des Satzes

Inhalt des Satzes HandTorque-

Verstrker Drehmomentschraubenschlssel

18186 HT-52 (18196) NorTorque-60-Doppelskala (130101) 18192 HT-72 (18198) NorTorque-100-Doppelskala (130103) 18195 HT-92 (18199) NorTorque-200-Doppelskala (130104)

Der HandTorque-Satz hat eine kombinierte Genauigkeit von +/- 6,5 %. Diese erhlt man durch eine Kombination der Toleranz von +/- 3 % des NorTorque-Drehmomentschraubenschlssels mit der Wlzabweichung des HandTorque-Getriebes. HINWEIS: Die Genauigkeit von +/- 6,5 % gilt nur, wenn das Multiplikationsverhltnis auf dem

Kalibrierungszertifikat genutzt wird und die Absttzung innerhalb der in Abbildung 6 dargestellten Parameter erfolgt.

ABBILDUNG 7 Bei der Compact Series mitgeliefertes Kalibrierungszertifikat (fr

anwendbare Modelle siehe oben).

24.21:1

10

Drehmoment Zum Schraubenlsen Einstellen 1. Um zu gewhrleisten, dass der Vervielfltiger nicht berlastet wird, wird die Verwendung eines

Drehmomentschlssels auch beim Lsen von Schrauben empfohlen. 2. Teilen Sie das maximale Ausgangsdrehmoment durch das bersetzugsverhltnis. Sie erhalten den

Hchstwert fr das Eingangsdrehmoment. 3. Whlen Sie einen geeigneten Drehmomentschlssel fr das Eingangsdrehmoment. HINWEIS: BEI EINIGEN DREHMOMENTSCHLSSELN IST BEI BETRIEB GEGEN DEN

UHRZEIGERSINN KEIN KLICKEN ODER KNACKEN ZU HREN. Vervielfltiger Bedienen 1. Rsten Sie den Vervielfltiger mit dem fr die anzuziehende Schraube korrekten Kraftantrieb bzw.

Kraft-Einsatz aus. 2. Stecken Sie den Vervielfltiger so auf die Schraube, dass sich die Absttzvorrichtung neben dem

Drehmomentpunkt befindet. Siehe Abbildung 2. 3. Stecken Sie den Drehmomentschlssel auf den Vervielfltiger mit der Einstellung wie unter

Drehmoment zum Schraubenanzug einstellen beschrieben. 4. Bettigen Sie den Drehmomentschlssel wie gewohnt bis Sie ein Klicken oder Brechen hren. Durch

langsame und gleichfrmige Verwendung des Drehmomentschlssels erzielen Sie genauere Ergebnisse.

HINWEIS: FR BESSERE GENAUIGKEIT KANN EIN MEWERTGEBER ZUR MESSUNG DES

EINGANGS- UND AUSGANGSDREHMOMENTS VERWENDET WERDEN.

11

RATSCHE MIT RCKLAUFSPERRE

Zweck Der Ratsche Mit Rcklaufsperre (RAS) Die meisten Vervielfltiger mit einem Drehmomentverhltnis von 25:1 und mehr sind mit einer Ratsche mit Rcklaufsperre ausgestattet. Der Vervielfltiger funktioniert in diesem Fall als eine Feder, die vollstndig gespannt werden muss, bevor ein Anziehen bzw. Lsen von Schrauben mglich ist. Dank der Ratsche wird gewhrleistet, dass die Feder gespannt bleibt und jeder weitere Eingangsdrehmoment direkt auf die Schraube bertragen wird. Machen Sie sich mit der Funktionsweise des Werkzeugs vertraut, indem Sie ein niedriges Drehmoment anwenden und die aufgebaute Spannung zurckschnellen lassen. Es gibt zwei verschiedene Arten von Ratschen mit Rcklaufsperre, mit denen der HandTorque ausgerstet sein kann, wie in Abbildung 8 unten gezeigt wird. Die links auf der Seite dargestellte Ratsche mit Rcklaufsperre erfordert einen Sechskantschlssel, um sie in der neutralen Position festzustellen. Die rechts auf der Seite dargestellte Ratsche mit Rcklaufsperre rastet automatisch in der neutralen Position ein, ohne dass ein Sechskantschlssel bentigt wird. Betrieb Der Ratsche Mit Rcklaufsperre Bitte aufmerksam lesen 1. Positionieren Sie den Richtungswhlhebel der Ratsche fr die entsprechende Betriebsrichtung: Prfen Sie die Rotationsrichtung und stellen Sie sicher, dass die Ratsche frei bedient werden kann.

Or CW = Rechtslufiger

Or CCW = Linkslufiger

Or N = Neutrale

ACHTUNG: VERWENDEN SIE DAS WERKZEUG NICHT, WENN DIE RATSCHE NICHT

FREI BEDIENT WERDEN KANN.

Rechtslufiger Betrieb/ Schrauben anziehen

Neutrale Position:

Positionieren Sie den Richtungswhlhebel der Ratsche zentral. Je nach Modellart wird fr das

Einrasten in der Position ein Sechskantschlssel bentigt. Vergewissern Sie sich vor

Inbetriebnahme, dass der Antriebsvierkant in beide Richtung frei rotiert.

Linkslufiger Betrieb/ Schrauben lsen

ABBILDUNG 8

12

2. Zur Anwendung des Drehmoments beachten Sie die Hinweise im Abschnitt Einstellen und Bedienen des Vervielfltigers. Stellen Sie die Richtung der Ratsche mit Rcklaufsperre wie in Abbildung 8 dargestellt ein.

3. Zum Entfernen des Vervielfltigers bauen Sie vorsichtig Spannung im Getriebe auf bis der Richtungswhlhebel der Ratsche in die neutrale Position gestellt werden kann. Lassen Sie den Drehmomentschlssel langsam linkslufig rotieren bis der Vervielfltiger freigegeben wird.

3.1 Spannen Sie die Drehmomentschlssel

ABBILDUNG 9

3.2 Whrend die Ratsche weiterhin unter Spannung steht, stellen Sie den Richtungswhlhebel der Ratsche in die linkslufiger position:

ABBILDUNG 10

3.3 Lassen Sie den Drehmomentschlssel langsam rotieren bis der Vervielfltiger freigegeben wird.

ABBILDUNG 11 Kann die aufgebaute Spannung nicht mit einer Schlsselumdrehung abgebaut werden, schieben Sie den Richtungswahlhebel der Ratsche zurck in die rechtslufige Richtung und bringen Sie die Ratsche so wieder in Position. Positionieren Sie den Drehmomentschlssel wieder und gehen Sie gem Prozedur Nr. 3 vor bis die aufgebaute Spannung vollstndig abgebaut ist.

4. Das Werkzeug kann jetzt von dem Verbindungselement genommen werden.

5. Machen Sie sich mit der Funktionsweise des Werkzeugs vertraut, indem Sie einen niedrigen Drehmoment anwenden und die aufgebaute Spannung zurckschnellen lassen.

Es wird empfohlen, das Rcklaufsperre-Eingangsgetriebe und die Zhne der Ratsche jhrlich durch einen von Norbar zugelassenen Hndler auf Verschlei und Beschdigungen prfen zu lassen.

13

WARTUNG Abriebsvierkant Die einzige Wartungsarbeit des Betreibers fr diese HandTorque Drehmomentvervielfltiger ist das Austauschen der Abtriebsvierkante, sollten diese beschdigt werden. Um das Gert und Getriebe vor (vor allem durch ein berdrehen verursachte) Schden zu schtzen, wurde der Abtriebsvierkant/Welle so entwickelt, dass er bei einem berdrehen abbricht. Somit werden interne Bauteile geschtzt, und der Vierkant kann leicht ausgetauscht werden. In einigen Fllen kann der Antriebsvierkant nicht ohne den Ausbau des Getriebes entfernt werden. In diesen Fllen sollte der handgefhrte Drehmomentvervielfltiger zur Reparatur an Norbar oder einen von Norbar zugelassenen Hndler geschickt werden. In einigen Fllen kann der Abtriebsvierkant jedoch ohne den Ausbau des Getriebes ausgetauscht werden. In diesen Fllen muss der Bolzen, der den Abtriebsvierkant an seiner Position hlt (Bolzen ist entweder M4 oder M5) entfernt werden.

Entfernen Sie anschlieend den gebrochenen/defekten Abtriebsvierkant.

Bauen Sie den neuen Abtriebsvierkant ein.

Setzen Sie einen neuen Bolzen ein und ziehen Sie diesen fest (4,7 Nm fr M4-Bolzen und 9 Nm fr M5-Bolzen)

ABBILDUNG 12 Alle anderen Wartungs- und Reparaturarbeiten mssen von der Fa. Norbar oder einem beauftragten Hndler ausgefhrt werden und sind Teil des Kundendiensts. Die Zeitabstnde, in denen Wartungsarbeiten notwendig werden, hngen von der Belastung und Betriebsumgebung ab. Reinigung Halten Sie das Werkzeug immer sauber, um hchste Sicherheitsstandards zu garantieren. Verwenden Sie keine scheuernden Reinigungsmittel oder Lsungsmittel.

14

TECHNISCHE DATEN Standard - Serien

Modell Teile - Nr Maximales Ausgabe-

Drehmoment Verhltnis Eingabe- Vierkant

Ausgabe- Vierkant

Nm lbfft zoll zoll HT 1/516010170012505.2:1

HT 2/5 HD 16012.HD 1700 1250 5.2:1 1 HT 2/5 HD 16030.HD 1700 1250 5.2:1 1 HT 2/25 HD 16034.HD 1700 1250 27:1 1

HT 2/25 AWUR 16088 1700 1250 27:1 HT 2/25 AWUR HD 16089.HD 1700 1250 27:1 1

HT 5/516014340025005.2:11 HT 5/25160283400250027:11 HT 5/125 16064 3400 2500 135:1 1

HT 5/25 AWUR160903400250027:11 HT 6/516016340025005.2:11

HT 6/25160243400250027:11 HT 6/25 AWUR160923400250027:11 HT 6/125 AWUR1609334002500135:11

HT 7/516067600044255.2:11 HT 7/25160186000442527:11

HT 7/25 AWUR160656000442527:11 HT 7/125 AWUR 1606860004425135:11

HT 9/25 160599500700027:11 HT 9/25 AWUR 160709500700027:11 HT 9/125 AWUR 1607195007000135:11

HT 11/25 16082200001470027:12 HT 11/125 AWUR 160492000014700135:12 HT 13/125 AWUR 160534750035000135:12

15

Serien Fr Kleine Durchmesser

Modell Teile - Nr Maximales Ausgabe-

Drehmoment Verhltnis Eingabe- Vierkant

Ausgabe- Vierkant

Nm lbfft zoll zoll HT 30/5 18003 3000 2200 5.2:1 1

HT 30/15 AWUR 18004 3000 2200 15:1 1 HT 30/25 AWUR 18006 3000 2200 27:1 1

HT 30/25 18007 3000 2200 27:1 1 HT 60/25 AWUR 18008 6000 4425 27:1 1

HT 60/25 18009 6000 4425 27:1 1 HT 60/125 18013 6000 4425 135:1 1

HT4 - Serien

Modell Teile - Nr Maximales Ausgabe-

Drehmoment Verhltnis Eingabe- Vierkant

Ausgabe- Vierkant

Nm lbfft zoll zoll HT4/15.5 17022 3000 2200 15.5:1 1 HT4/26 17021 4500 3300 26:1 1

Compact Serien

Modell Teile - Nr Maximales Ausgabe-

Drehmoment Verhltnis Eingabe- Vierkant

Ausgabe -Vierkant

Nm lbfft zoll zoll HT-52/4.7 180200 1000 740 4.7:1

HT-52/22.2 180201 1000 740 22.2:1 HT-52/22.2 180202 1000 740 22.2:1

HT-52/22.2 AWUR 180203 1000 740 22.2:1 HT-52/22.2 AWUR 180204 1000 740 22.2:1 HT-52/22.2 AWUR 180205 1000 740 22.2:1 1 HT-52/22.2 AWUR 180206 1000 740 22.2:1 1

HT-72/5.2 180208 1500 1100 5.2:1 1 HT-72/5.2 180209 1500 1100 5.2:1 HT-72/5.2 180210 2000 1450 5.2:1 1 HT-72/27 180212 2000 1450 27:1 1

HT-72/27 AWUR 180214 2000 1450 27:1 1 HT-92/25 AWUR 180215 4000 2950 25:1 1

HT-119/25.5 AWUR 180216 7000 5100 25.5:1 1 HT-52 (HandTorque Kit) 18196 1000 740 22.2:1 HT-72 (HandTorque Kit) 18198 2000 1450 27:1 1 HT-92 (HandTorque Kit) 18199 4000 2950 25:1 1

HINWEIS: Einige der Verhltniszahlen in der oben stehenden Tabelle sind nur eine grobe

Orientierungshilfe. Um genauere Ergebnisse zu erhalten, nutzen Sie bitte das Multiplikationsverhltnis auf Ihrem Kalibrierungszertifikat, das mit Ihrem HandTorque geliefert wurde (siehe Seite 9)

16

FEHLERSUCHE Folgende Tabelle gilt als Orientierungshilfe, kontaktieren Sie bei komplexeren Strungen bitte Ihren Norbar Hndler oder Norbar direkt.

Strung Mgliche Abhilfe Antriebsvierkant ausgerissen Siehe Abschnitt Wartung

Antriebsvierkant rotiert, aber nicht der Abtriebsvierkant

Schwerer Schaden der Innenverzahnung! Schicken Sie das Gert zur Reparatur an Norbar oder deren Hndler (Prfen Sie, dass der RAS-Richtungshebel nicht in neutraler Position ist)

Der Antriebsvierkant rotiert nicht Prfen Sie, dass der RAS-Richtungshebel nicht in neutraler Position ist.

17

NOTES / AUFZEICHNUNGEN

18

NOTES / AUFZEICHNUNGEN

OPERATORS MANUAL

HANDTORQUE MULTIPLIERS

Part Number 34269 | Issue 12 | Original Instructions (English/Deutsch) Norbar Torque Tools Ltd 2022

NORBAR TORQUE TOOLS LTD

Wildmere Road, Banbury, Oxfordshire, OX16 3JU

UNITED KINGDOM Tel + 44 (0)1295 270333

Email enquiry@norbar.com

For the most up-to-date version of the Operators Manual, please scan the

QR code below.

www.norbar.com

To find your local Norbar company or

distributor, please scan the QR code below.

Fr die aktuellste Version der Bedienungsanleitung

scannen Sie bitte den untenstehenden QR-Code.

Um Ihr lokales Norbar- Unter

Manualsnet FAQs

If you want to find out how the HandTorque Norbar works, you can view and download the Norbar HandTorque 34269 Multiplier Tool Operator's Manual on the Manualsnet website.

Yes, we have the Operator's Manual for Norbar HandTorque as well as other Norbar manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operator's Manual should include all the details that are needed to use a Norbar HandTorque. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Norbar HandTorque 34269 Multiplier Tool Operator's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Norbar HandTorque 34269 Multiplier Tool Operator's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Norbar HandTorque 34269 Multiplier Tool Operator's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Norbar HandTorque 34269 Multiplier Tool Operator's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Norbar HandTorque 34269 Multiplier Tool Operator's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.