Norbar 34143 Enclosure Meter Operator's Handbook PDF

1 of 3
1 of 3

Summary of Content for Norbar 34143 Enclosure Meter Operator's Handbook PDF

TORQUE MONITORING ENCLOSURE METER

OPERATORS HANDBOOK (PART NO. 34143) ISSUE 2

MODEL NOS. 60072 & 60097

NORBAR TORQUE TOOLS LTD, Beaumont Road, Banbury,Oxfordshire, OX16 7XJ, UNITED KINGDOM Tel: + 44 (0) 1295 270333, Fax: + 44 (0) 1295 753643

TORQUE MONITORING ENCLOSURE METER PAGE 1 OF 2 ISSUE 2 OCTOBER 1997

TORQUE MONITORING ENCLOSURE METER

INTRODUCTION _____________________________________________________________

The enclosure meter instrument is for monitoring the torques required to remove and replace the tops of many kinds of screw top enclosures.

Used in conjunction with the Norbar electronic transducer system (ETS) it is able to display and record the torques required to open and close most small and medium size container tops. (Both clockwise and anti-clockwise torques can be monitored).

Analog torque signals can be transmitted to a Y/T chart recorded for graphical presentation or to a computer for data analysis. If the ETS is fitted with an RS-232-C serial data output option, peak torques can be transmitted to a printer or computer.

PRINCIPLE OF OPERATION ___________________________________________________

The container to be tested is clamped between four adjustable rubber sleeved pillars on the top of the enclosure meter. The ETS unit is tared to read zero and set to require mode, track, memory or first peak memory. (See ETS operators handbook for detailed operating and setting instructions of ETS). The container cap may then be twisted as required. Torques will be monitored and displayed by the ETS.

SPECIFICATION _____________________________________________________________

Torque range for 60072: 0.5 N.m to 5 N.m.

Torque range for 60097: 5 lbf. in. to 50 lbf. in.

Torque and Load Transducer Accuracy: 0.1% of full scale.

Maximum clamp diameter: 190 mm.

Weight: 10.02 kg.

Overall Diameter: 265 mm.

Height: 218 mm.

TORQUE MONITORING ENCLOSURE METER PAGE 2 OF 2 ISSUE 2 OCTOBER 1997

OPERATING INSTRUCTIONS __________________________________________________

1. Connect the transducer lead between one ETS and the torque transducer plug on the enclosure meter. Plug the torque transducer amplifier module into the ETS back panel. Switch ETS on. Units of N.m, lbf. ft. or lbf. in. may be selected as required.

2. Allow the ETS unit to warm up for 2 minutes.

3. Connect up any chart recorded, printer, etc. as required and switch on.

4. Clamp container between the 4 rubber sleeved pins.

5. Tare the ETS unit (and chart recorder if connected) for zero. The transducer zero adjustment is a tr

Manualsnet FAQs

If you want to find out how the 34143 Norbar works, you can view and download the Norbar 34143 Enclosure Meter Operator's Handbook on the Manualsnet website.

Yes, we have the Operators Handbook for Norbar 34143 as well as other Norbar manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operators Handbook should include all the details that are needed to use a Norbar 34143. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Norbar 34143 Enclosure Meter Operator's Handbook is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Norbar 34143 Enclosure Meter Operator's Handbook consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Norbar 34143 Enclosure Meter Operator's Handbook free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Norbar 34143 Enclosure Meter Operator's Handbook, simply download the document to your computer. Once downloaded, open the PDF file and print the Norbar 34143 Enclosure Meter Operator's Handbook as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.