Contents

Nissan Z Coupe 370Z v2 Owner's Manual PDF

1 of 243
1 of 243

Summary of Content for Nissan Z Coupe 370Z v2 Owner's Manual PDF

Black plate (3,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

0 Foreword GUID-79E259E9-9843-407A-B3A3-821D0A18027B

NISSAN NAVIGATION SYSTEM HELP- DESK CONTACT INFORMATION

GUID-51AC7A56-F23C-4111-B50C-994F64187E11

For assistance or inquiries about the NISSAN Navigation System, or to order updated map data, contact the NISSAN NAVIGATION SYS- TEM HELPDESK at:

. ADDRESS: P.O. Box 1588, Orem, UT 84059-992

. E-MAIL: Nissan-Navi-Info@navteq.com

. WEB SITE: www.NissanNavigation.com

. PHONE: 1-888-661-9995

. HOURS: 6:00 AM to 5:00 PM (Pacific Time)

NISSAN CONSUMER AFFAIRS DE- PARTMENT

GUID-E20D165A-67E6-4240-8F68-4ADA88932C34

For assistance or inquiries about the NISSAN warranty, service or general questions, contact the NISSAN Consumer Affairs Department at:

For U.S. customers

Nissan North America, Inc.

Consumer Affairs Department

P.O. Box 685003

Franklin, TN 37068-5003

1-800-NISSAN-1

(1-800-647-7261)

For Canadian customers

Nissan Canada Inc.

5290 Orbitor Drive

Mississauga, Ontario L4W 4Z5

1-800-387-0122

GUID-2D072AF1-4D5F-4640-AB86-E25797D06A24

Thank you for purchasing a NISSAN vehicle.

This users manual is for the navigation system only. This manual contains operating instructions for the NISSAN Navigation System offered in your NISSAN vehicle.

Please read this manual carefully to ensure safe operation of the navigation system.

. Because of possible specification changes and optional equipment, sections of this manual may not apply to your vehicle.

. All information, specifications and illustra- tions in this manual are those in effect at the time of printing. NISSAN reserves the right to change specifications or design at any time without notice.

. Do not remove this manual from the vehicle when selling this vehicle. The next user of this navigation system may need the manual.

FOREWORD

Black plate (1,1)

Introduction 1

Getting started

Map settings

Setting destination

Route guidance

Storing location/route

Viewing technical information

Other settings

Voice recognition

General system information

Troubleshooting guide

Index

2

3

4

5

6

7

8

9

10

11

12

Contents

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Black plate (2,1)

Black plate (5,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

1 Introduction

How to use this manual ............................................................. 1-2

For safe operation .... ........................................................... 1-2

Reference symbols ................................................................ 1-2

Safety information ........................................................................ 1-2

Laser product .... ........................................................................ 1-3

Black plate (6,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

1-2 Introduction

GUID-022EBDC5-1BE5-4479-9508-B62C19425EB6

This manual uses special words, symbols and icons that are organized by function.

Please refer to the following items to understand how to use this manual properly.

FOR SAFE OPERATION GUID-8356E207-707B-49BA-8625-7EC4E25C9210

WARNING

Indicates the presence of a hazard that could cause death or serious personal injury. To avoid or reduce the risk, the procedures must be followed precisely.

CAUTION

Indicates the presence of a hazard that could cause minor or moderate perso- nal injury or damage to your vehicle. To avoid or reduce the risk, the procedures must be followed carefully.

NOTE:

Indicates items that help you understand and maximize the performance of your vehicle. If ignored, they may lead to a malfunction or poor performance.

REFERENCE SYMBOLS GUID-84A8BA6C-FD55-4715-BD54-E5676E85154C

INFO:

Indicates information that is necessary for efficient use of your vehicle or accessories.

Reference page:

Indicates the title and page that you should refer to.

<>:

Indicates a button on the control panel.

[ ]:

Indicates a key/item displayed on the screen.

Voice Command:

Indicates an operation by voice command.

Variable commands, such as numbers, are indicated in italics in parentheses < >.

GUID-29B50A94-7944-40BB-B06A-5AC6FFBEF9CC

This system is primarily designed to help you reach your destination, and it also performs other functions as outlined in this manual. However, you, the driver, must use the system safely and properly. Information concerning road conditions, traffic signs and the availability of services may not always be up to date. The system is not a substitute for safe, proper and legal driving.

Before using the navigation system, please read the following safety information. Always use the system as outlined in this manual.

WARNING

. To operate the navigation system or use the multi-function controller, first park the vehicle in a safe location and set the parking brake. Operating the system while driving can distract the driver and may result in a serious accident.

. Do not rely on route guidance alone. Always be sure that all driving maneuvers are legal and safe in order to avoid accidents.

. Do not disassemble or modify this system. If you do, it may result in accidents, fire or electrical shock.

HOW TO USE THIS MANUAL SAFETY INFORMATION

Black plate (7,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

. If you notice any foreign objects in the system hardware, spill liquid on the system or notice smoke or a smell coming from it, stop using the system immediately and contact a NISSAN dealer. Ignoring such con- ditions may lead to accidents, fire or electrical shock.

CAUTION

. Do not use this system if you notice any malfunctions such as a frozen screen or the lack of sound. Con- tinued use of the system may result in accidents, fire or electrical shock.

. Some states/provinces may have laws limiting the use of video screens while driving. Use this sys- tem only where it is legal to do so.

. Extreme temperature conditions [below 48F (208C) and above 1588F (708C)] could affect the per- formance of the system.

. The glass display screen may break if it is hit with a hard or sharp object. If the glass screen breaks, do not

touch it. Doing so could result in an injury.

NOTE:

Do not keep the navigation system running with the engine stopped. Doing so may discharge the vehicle battery. When you use the navigation system, always keep the engine running.

GUID-130BDEE8-9D34-46E9-BC69-1ED5F0544A5F

This navigation system is certified as a Class 1 laser product.

The navigation system complies with DHHS Rules 21 CFR Chapter 1, Subchapter J.

WARNING

. Do not disassemble or modify this system. There are no user service- able parts in this navigation system.

. If maintenance, adjustments and operations other than those speci- fied in this manual are attempted, injury due to laser radiation and exposure could occur.

JI0221

Required SiriusXM Satellite Radio and NavTraf- fic monthly subscriptions are sold separately. NavTraffic are only available in select markets. For more information,

see www.siriusxm.com/navtraffic.

Introduction 1-3

LASER PRODUCT

Black plate (8,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

1-4 Introduction

JI0222

Required SiriusXM Satellite Radio and Nav- WeatherXM monthly subscriptions are sold separately. NavWeatherXM is only available in select markets. For more information,

see www.siriusxm.com/navweather.

Black plate (9,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2 Getting started

Control buttons and functions .... ........................................... 2-2

Control panel .... .................................................................... 2-2

Multi-function controller ...................................................... 2-5

Steering wheel switch .......................................................... 2-5

Starting the system ...................................................................... 2-7

Navigation system status screen ............................................. 2-7

Functions disabled while driving .... ....................................... 2-8

Menu screen and how to operate .... ................................. 2-10

Menu screens and their purposes .... ........................... 2-10

Using controls to adjust values, levels, etc. .... .......... 2-11

Start menu ............................................................................ 2-12

List screen ............................................................................ 2-13

Touch panel operation .... ...................................................... 2-14

Example of touch panel operation .... ........................... 2-14

How to input letters and numbers .... ................................. 2-15

Character (letters and numbers) input screen ............ 2-15

Number input screen .... ................................................... 2-16

Map menu screen .................................................................... 2-17

Current location map screen ......................................... 2-17

Scrolled location map screen .... ................................. 2-18

Storing home location/address ............................................. 2-18

How to store home location .......................................... 2-18

Setting destination .... ............................................................ 2-20

Searching for destination .... ......................................... 2-20

Starting route guidance .... ............................................ 2-21

Canceling route .... .......................................................... 2-21

Operating maps .... ................................................................. 2-22

How to view map screen .... ......................................... 2-22

Setting voice guidance .... .................................................... 2-23

Turning voice guidance ON/OFF .... ........................... 2-23

Adjusting voice guidance volume .... .......................... 2-24

NISSAN voice recognition .... .............................................. 2-25

Using the system .............................................................. 2-25

Before starting .... ............................................................ 2-25

Giving voice commands .... ........................................... 2-25

Command list .... .............................................................. 2-27

Black plate (10,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-2 Getting started

GUID-B58C613B-E5FA-494B-BF65-6BD4E91B4EDD

CONTROL PANEL GUID-A16CFCE1-3DAD-4C75-AF46-82F712911C89

NGT0091

Type A

JNB0091X

Type B

CONTROL BUTTONS AND FUNCTIONS

Black plate (11,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

JNB0295X

Type C

JNB0169X

Type D

Getting started 2-3

Black plate (12,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-4 Getting started

JNB0296X

Type E

*1 :

Push multiple times to display audio in- formation with either the air conditioner status, fuel economy or navigation direc- tions.

*2 :

Push to enter a destination. Various meth- ods for entering a destination are available.

4. Setting destination

*3 :

Push to access guidance control functions (guidance cancellation, route priority, way- point setting on the route, etc.).

*4 Multi-function controller:

Turn to highlight an item on the screen, push to select the highlighted item or scroll the map.

*5 :

Push to display the vehicle, traffic, weather or voice recognition information.

*6 OFF> :

Push to switch between the day screen (bright) and the night screen (dark). Push and hold to turn off the display. Push again to turn on the display.

*7 :

Push to access the system settings.

*8 :

Push to hear the current guidance for a programmed route.

*9 :

Push to return to the previous screen. In a settings screen, this button can also be used to apply the setting.

In a character input screen, this button can also delete the characters that have been entered.

*10 :

Push to display the map. While following programmed route, push multiple times to change the type of route information.

*11 IN>, OUT>:

Push to switch to the zoom mode to change the map scale.

*12 / :

Push to access the display settings.

INFO:

. If needs to be pushed to apply the setting on a settings screen, this manual will explicitly include a step for this proce- dure. Otherwise, pushing returns the display to the previous screen.

. The layout of the control panel switches may vary depending on the vehicle model and equipment.

Black plate (13,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

MULTI-FUNCTION CONTROLLER GUID-4FA70DB6-5AA5-46E4-BADC-036FB78A2DE0

With Directional buttons GUID-E7481272-7B19-4197-8455-3CAABB44FEEF

JNB0085X

*1 :

Push to select the highlighted item on the screen.

If this button is pushed while a map is displayed, the map menu screen is dis- played.

*2 Main directional buttons:

Use to move across the map, highlight an item on the screen or adjust a setting (volume, brightness, etc.).

*3 Additional directional buttons:

Use to move across the map or highlight an item on the character input screen.

*4 Center dial:

Turn to highlight an item on the screen or adjust a setting.

Turn the center dial on the map screen. The map scale is displayed. Use the center dial to adjust the map scale.

Without Directional buttons GUID-46122683-56B0-4AF9-9751-8EDFD6077001

JNB0197X

*1 :

Push to select the highlighted item on the screen.

If this button is pushed while a map is displayed, the map menu screen is dis- played.

*2 Center dial/Slide switch:

Center dial

Turn to highlight an item on the screen or adjust a setting.

The center dial can also be used to adjust the map scale.

Slide switch

Slide (push upward/downward/leftward/ rightward) to select an item on the screen or to adjust a setting (volume, brightness, etc.)

The map can be scrolled in 8 directions by sliding this switch.

STEERING WHEEL SWITCH GUID-13C6EBE9-78E2-44D1-B1F3-7607F6089D72

JNB0268XType A

Getting started 2-5

Black plate (14,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-6 Getting started

JNB0270XType B

JNB0298XType C

*1 :

Tilt to highlight an item on the screen or adjust a setting. Push to select the high- lighted item.

If this button is pushed while a map is displayed, the map menu screen is dis-

played. Map menu screen (page 2-17)

Push and hold while a map or status screen is shown to display the Start Menu.

Start menu (page 2-12)

If this button is tilted up while the audio function is activated and the map or status screen is displayed, the audio system can be operated.

*2 < >:

Push this button during a setting operation to return to the previous screen. In a settings screen, this button can also be used to apply the setting.

*3 <+ >: Use to adjust the volume. These buttons have the same function as that of the volume control knob. Refer to the vehicle Owners Manual.

*4 >:

Push to start the voice recognition mode. If the voice recognition mode is already activated, pushing this button cancels the voice guidance and you can speak a voice command immediately.

*5 < >:

Push to display the phone mode screen.

Refer to the vehicle Owners Manual.

*6 :

Use to switch the audio mode (source).

Refer to the vehicle Owners Manual.

*7 < >:

Push to change what is shown on the vehicle information display.

Refer to the vehicle Owners Manual.

Black plate (15,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUID-630ABAD4-AF69-4392-8E2B-56108C04179D

The navigation system starts when the ignition switch is placed in the ACC or ON position.

NOTE:

Do not keep the navigation system on with the engine stopped. Doing so may dis- charge the vehicle battery. When you use the navigation system, always keep the engine running.

GUID-9C09D7B7-B258-4D8B-9692-81A104A9C62E

By pushing at anytime, you can display a split screen with audio information that is always at the top. Each time is pushed, the bottom part of the screen changes between air conditioner, fuel economy or navi- gation directions.

INFO:

There are different status screens displayed depending on various factors, such as the currently active mode, whether a destination has been set or not, etc.

NGT0017

When a route to the destination is set and the audio system is on, a screen similar to the one above appears.

*1 Turning direction at the next intersection

*2 Name of the next street

*3 Distance to the next intersection

*4 Distance remaining to the destination

*5 Remaining time to the destination

NGT0018

When a route to the destination is not set and the audio system is off, a screen similar to the one above appears.

Getting started 2-7

STARTING THE SYSTEM NAVIGATION SYSTEM STATUS SCREEN

Black plate (16,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-8 Getting started

GUID-A20A071E-D0CC-4C9C-9594-50F58EBADD6C

NGT0019

To ensure safe driving, some functions cannot be operated or have limited operation when the vehicle driving speed is above 5 MPH (8 km/h).

The on-screen text and keys for these restricted functions will be "grayed-out" or muted and cannot be selected while driving. In some cases, a screen message will appear indicating a restricted function.

Restricted functions while driving include:

. Character (letter and number) input screen during destination entry (street address, phone number, freeway entrance/exit, inter- section, city center)

. Places search by name and city name

. Scrolling and viewing of certain navigation lists

. Adding/editing address book entries

. Adding/editing home location

. Storing current position, information, desti- nations

These functions will become available again when the vehicle speed is reduced to 5 MPH (8 km/h).

Destination functions available while driving include:

FUNCTIONS DISABLED WHILE DRIVING

Black plate (17,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

. Home

. Address Book

. Previous Destinations

. Nearby places

. Address book

. My places

. Map input

Getting started 2-9

Black plate (18,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-10 Getting started

GUID-24762EC4-B588-410F-B996-9614F8213E89

JNB0173M

MENU SCREENS AND THEIR PUR- POSES

GUID-0BE61DEB-1E62-4150-813D-59A1FBE7764F

Push , , , or (if so equipped) to display the corresponding menu screen.

How to select a menu item GUID-45E3D19A-E7D2-46C6-A12E-8420445DB26F

Example: screen

1. Highlight the preferred menu item using the multi-function controller.

2. To select the preferred menu item, highlight the item and push . The next screen is displayed.

3. Push to return to the previous screen without applying any changes.

Push to return to the current location map screen without applying any changes.

INFO:

An item can also be selected by tilting on the steering wheel up and down.

MENU SCREEN AND HOW TO OPERATE

Black plate (19,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

USING CONTROLS TO ADJUST VALUES, LEVELS, ETC. GUID-2B56568D-42AA-4A6E-8888-34490DA77665

NGT0022

With directional buttons

Getting started 2-11

Black plate (20,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-12 Getting started

JNB0174M

Without directional buttons

There are five main methods to control the navigation system: the center dial, the main directional buttons, the slide switch, the touch panel and the switches on the steering wheel. Use these controls to adjust the volume of the phone and voice guidance, the display bright- ness, etc.

How to adjust GUID-0A8CAEAA-ADB4-4CA2-A921-E83B08C7AE4D

1. Highlight the preferred setting item and push . The color of the corre- sponding adjustment item changes.

2. Adjust the value or level of the indicator bar using the multi-function controller.

3. Push or to apply the setting.

INFO:

. The volume of phone and voice guidance, the display brightness, etc. can be adjusted by tilting on the steering wheel up and down.

. These same adjustments can also be performed using the touch panel operation.

Adjusting volume and others (page 2-14)

START MENU GUID-1A734B7E-5380-4301-8BAB-97B411A6083F

The start menu can be displayed using the steering wheel switch.

NGT0023

1. Push and hold on the steering wheel.

2. Highlight the preferred item and push .

INFO:

on the steering wheel switch can be used to display the start menu only when the map or status screen is displayed.

Black plate (21,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Available items GUID-C2FBA0B2-BF88-4619-BDC1-6DA70803264A

. [Destination]:

Displays the destination screen. It is the same screen that appears when is pushed.

4. Setting destination

. [Route]:

Displays the route screen. It is the same screen that appears when is pushed.

5. Route guidance

. [Info]:

Displays the information screen. It is the same screen that appears when is pushed.

7. Viewing technical information

. [Settings]:

Displays the settings screen. It is the same screen that appears when is pushed.

8. Other settings

LIST SCREEN GUID-1D2772EE-9BD4-43E3-9C28-AC2DD13CDE20

NGT0024

After searching for a point of interest, a list screen is displayed.

Depending on the list displayed, it can be sorted.

Items displayed in a list GUID-794320F6-2EB2-45BC-A4E5-97280E9E41ED

*1 Highlight the preferred item from the list and push to select it. If a location or facility name is not completely displayed (due to length), highlight the item to display the hidden part of the name.

*2 Distance from the current location

*3 Direction to the point of interest

*4 If the entire list cannot be displayed on the screen, the system displays the total number of items in the list and the entry number of the selected item. Scroll the list using the multi-function controller.

*5 An item that starts with the selected letter will be displayed at the top of the list.

Getting started 2-13

Black plate (22,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-14 Getting started

*6 Highlight and push to sort the list in the original order.

*7 When the list is sorted by the shortest distance, the selected location can be confirmed in the preview on the right side of the screen.

*8 Highlight and push to modify search conditions.

GUID-C18EBD96-640E-4A66-BA63-1A9B08A7C36D

With this system, the same operations as those for the multi-function controller are possible using the touch panel operation.

This manual describes the operations using the multi-function controller.

For the operations that differ from those of the multi-function controller and for useful methods for using the touch panel operation, refer to each section.

EXAMPLE OF TOUCH PANEL OPERA- TION

GUID-87047137-7434-431D-91BD-EE4CA89ECC46

Here, the operation examples performed with the touch panel operation are described.

Selecting item GUID-0BC860AD-0BD8-4352-A8A7-2B96A34BF6A8

NGT0025

When the item is touched, the next screen is displayed.

Adjusting volume and others GUID-298337AF-59C8-4498-9048-2C8992870D58

NGT0026

Touch [+] or [] located on the right and left of the bar graph to perform the adjustment.

Scrolling message or list GUID-B8DFEF35-603F-4A66-A31B-EF2B6908D079

NGT0027

Touch [ ] or [ ] to scroll the message or list.

Touch [ ] or [ ] to skip to the next page.

TOUCH PANEL OPERATION

Black plate (23,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Inputting letters and numbers GUID-5321D12D-8B9B-4BD0-9E01-850C0C40CC18

NGT0028

1. Touch the letter or number.

2. To delete a character, touch [Delete]. Push and hold [Delete] to delete all of the characters.

GUID-F21D3221-98F6-4FC3-A8F3-F5E34CA54E61

CHARACTER (letters and numbers) IN- PUT SCREEN

GUID-3818DD56-ABE1-4B5C-B96A-5CBEFF9F160B

When setting a destination, searching for a facility or editing the stored locations, etc. alphanumeric characters must be entered into the system.

NGT0054

1. Use the multi-function controller to highlight a character on the displayed keyboard.

NGT0055

2. Push . The highlighted character is entered.

NGT0056

3. Push , or highlight [Delete] and push to delete the last character entered.

Push and hold to delete all the characters entered.

Highlight [Space] and push to enter a space.

NGT0057

4. After finishing the entry, highlight [List] and push .

Getting started 2-15

HOW TO INPUT LETTERS AND NUMBERS

Black plate (24,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-16 Getting started

INFO:

. Push on the control panel to return to the previous screen, but only after deleting all the characters entered.

. When [BACK] is touched on the screen, the screen returns to the previous screen even when characters have been entered.

. When text has been entered and the number of matching list items has been narrowed down enough so that they fit on the screen, the list screen appears automatically.

NGT0058Symbol input screen

INFO:

Symbol keys are displayed by highlighting [Symbols] and pushing . Alphabet keys are displayed by highlighting [A-Z] and pushing .

NUMBER INPUT SCREEN GUID-59EBC7C6-C512-46E3-BB3B-8D7F181E6D23

A phone number or a street number can also be entered as a search method to look for a destination.

INFO:

Only the locations included in the map data database can be searched for by a phone number.

NGT0059

1. Use the multi-function controller to highlight a number on the displayed keyboard.

NGT0060

2. Push . The highlighted number is entered.

NGT0061

3. Push , or highlight [Delete] and push to delete the last number entered.

Push and hold to delete all the numbers entered.

NGT0062

4. After finishing the entry, highlight [List] and push .

Black plate (25,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

INFO:

. can be pushed on the control panel to return to the previous screen, but only after deleting all the numbers entered.

. When [BACK] is touched on the screen, the screen returns to the previous screen even when numbers have been entered.

GUID-BB7E41FA-6BB3-465E-8C16-A395BBA2CB31

Push while the current location map screen or a scrolled map screen is displayed to display the menu corresponding to that screen.

This menu can be used to access helpful functions quickly, such as setting a destination and searching for points of interest nearby.

To select a menu item, use the method described earlier in this manual.

Menu screen and how to operate (page 2-10)

INFO:

With the touch operation, the same screen can be displayed by touching [Map Menu] located on the map screen.

CURRENT LOCATION MAP SCREEN GUID-CC966A19-43AC-416C-A3F3-7F2A225535FC

NGT0029

If is pushed while the current location map screen is displayed, the following options are available.

. [Store Location]:

Store the current vehicle location in the Address Book. The stored location can be retrieved as necessary to set it as a destination (waypoint).

Storing location (page 6-2)

. [Nearby Places]:

Search for points of interest near the current vehicle location, such as restaurants and gas stations, etc.

Finding nearby place (page 4-5)

. [Map View]:

Perform map operations such as the switch- ing of map type and the setting of map orientation and scale.

3. Map settings

. [Map Icons]:

Select map icons of certain points of interest (such as restaurants and gas stations, etc.) to be displayed on the map around the current vehicle location.

Displaying map icons (page 3-17)

. [Store Tracking]:

Store in the Address Book the route travelled from the starting point to the current location.

Storing tracked route (page 6-6)

Getting started 2-17

MAP MENU SCREEN

Black plate (26,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-18 Getting started

SCROLLED LOCATION MAP SCREEN GUID-A9C2F142-E2DD-4EEB-BF4B-430BF74ECE68

NGT0030

If is pushed while a scrolled map screen is displayed, the following options are available.

. [New Dest.]:

Set the destination to the map location where was pushed. If a destina- tion is already set, the location will be set as the new destination.

Setting point on map (page 4-19)

. [Add to Route]:

Set the map location where was pushed as a destination or a waypoint.

This is available only when the suggested route is already set.

Setting destination or waypoint (page 5-14)

. [Nearby Places]:

Search for points of interest near the map location where was pushed and

set them as a destination or waypoint.

Use the same search method as the one for [Places].

Finding nearby place (page 4-5)

. [Store Location]:

Store in the Address Book the map location where was pushed. The stored location can be retrieved to set it as a destination or waypoint.

Storing location (page 6-2)

. [Delete]:

Delete a stored location. To delete it, place the cross pointer over the corresponding icon.

. [Incident Detail]:

This function can be selected only when the traffic information icon is displayed.

Display the details of the traffic information icon.

Place the cross pointer over the icon you want to check.

INFO:

Incident details are a feature of Traffic Informa- tion, and that a NavTraffic subscription is required in order to receive Traffic Information.

GUID-C0C85DD7-5544-4D74-A724-F0326DC92F79

HOW TO STORE HOME LOCATION GUID-EAAA43F1-D5A0-4847-BF2D-4183C54BA25B

If a home location is already stored in the Address Book, it can be easily retrieved to set the route to the stored home location.

The procedure to store the home location is the same as for storing any other location.

4. Setting destination

As an example, the procedure for storing the home location by searching for a destination by address is described here.

NGT0031

1. Push .

2. Highlight [Home (Add New)] and push .

STORING HOME LOCATION/ ADDRESS

Black plate (27,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NGT0032

3. A confirmation message is displayed. Con- firm the contents of the message, highlight [Yes] and push .

NGT0033

4. Highlight [Street Address] and push . A character input screen is displayed.

NGT0034

5. Enter the address of the home location, highlight [OK] and push .

Finding address (page 4-4)

The map screen is displayed.

NGT0035

6. Adjust the location of your home using the muti-function controller, if necessary.

7. After adjust ing the locat ion, push .

NGT0036

8. A message is displayed and the home location is stored.

NGT0066

9. Highlight [OK] and push .

10. Push to return to the current location map screen. The home icon is displayed on the map.

INFO:

The same setting can also be performed by pushing and highlighting [Naviga- tion].

Storing location by searching (page 6-2) Getting started 2-19

Black plate (28,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-20 Getting started

GUID-7A83FB78-9705-4073-94D4-BBF4B9200B12

SEARCHING FOR DESTINATION GUID-66346E6C-FF12-4C98-824C-FD5B49256E6E

As an example, the method for setting a restaurant as the destination using [Places] is described here.

NGT0037

1. Push .

2. Highlight [Places] and push .

NGT0038

3. Highlight [Nearby RESTAURANT] and push .

INFO:

The search can also be narrowed down by selecting [All Categories or Name] or [ZAGAT] on this screen. By selecting [All Categories or Name], the area, name of facility, etc. can be specified. By selecting [ZAGAT], restaurants registered in the ZA- GAT database can be searched and sorted by its rating regarding food, decor, cost, service, etc.

NGT0039

4. Highlight the preferred restaurant from the list and push .

INFO:

. The position of the selected location is displayed in the preview on the right side of the screen.

. If there is a route already in progress, only places along the current route will be listed. Turn off [Show Along Route] at the

top of list to display all nearby places.

NGT0040

5. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push .

The system sets the destination to the selected location and starts calculating a route.

INFO:

Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc. if necessary.

Procedures after setting destination (page 5-2)

SETTING DESTINATION

Black plate (29,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

STARTING ROUTE GUIDANCE GUID-DA651AA9-020C-41C5-BA6D-66A6FB6C5D71

After setting the destination and performing route calculation, the suggested route is dis- played.

NGT0040

1. Highlight [Start] and push .

NGT0042

2. Once route guidance is started, the system navigates through the guide points using visual and voice guidance.

NGT0043

3. When approaching a guide point, the system automatically changes to the split screen and shows an enlarged view of the intersection in the left screen.

Push to switch to the full map screen.

NGT0044

4. When arriving at the destination, route guidance automatically ends.

CANCELING ROUTE GUID-28102B3C-B6FB-4921-B899-6DBFE8FCB7E6

Delete a route that is already set according to the following procedure.

NRG0019

1. Push .

2. Highlight [Cancel Route] and push .

NGT0046

3. A confirmation message is displayed. High- light [Yes] and push .

Getting started 2-21

Black plate (30,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-22 Getting started

INFO:

. If a route is canceled, [Cancel Route] changes to [Resume Route].

Highlight [Resume Route] and push to reactivate the canceled route.

This is available only until a new route is set or a currently set destination is deleted.

. The above step does not delete the destination that has been set. To delete a destination, push and highlight [Delete Destination], then push .

Delete destination (page 4-20)

GUID-EC233EBE-1592-4D8E-972F-E2F3F43A1E61

HOW TO VIEW MAP SCREEN GUID-447D71E9-7977-4E36-AC1E-877BED82B344

The navigation system displays various informa- tion on the map screen.

Screen information GUID-4CA74274-5369-4F36-861A-EFA2308666F6

NGT0047

*1 Vehicle icon:

Indicates the current vehicle location and the direction of travel.

*2 Starting point:

Displays the vehicle location, with which the route is set, as the starting point.

*3 Guide point:

Indicates a guide point on the route.

*4 Waypoint:

Displays locations between the starting point and the destination. A maximum of 5 waypoints can be set.

OPERATING MAPS

Black plate (31,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

*5 Destination:

Indicates the destination location of the route guidance.

When you reach your destination, the address will be displayed on the map screen.

*6 Suggested route:

Appears in bold yellow during route gui- dance.

*7 Map Menu icon:

Touch the icon to display the Map Menu screen.

Map menu screen (page 2-17)

*8 / Direction indicator:

Indicates the directional setting of the map. Touch the icon to change the setting.

: North always pointing up.

: Traveling direction always pointing up. Setting map orientation (page 3-14)

*9 Scale indicator:

Indicates the scale of the map.

Touch the icon to display the scale bar. This allows the map scale to be adjusted.

Operating with touch operation (page 3-10)

*10 Street name:

Displays the name of the street that the vehicle is currently driving on.

GUID-849BE8ED-BA6E-471C-B6E1-B7B5915174E9

TURNING VOICE GUIDANCE ON/OFF GUID-53A18E54-2779-4E1A-A115-2A38B7F39999

Voice guidance can be activated or deactivated.

NRG0081

1. Push .

2. Highlight [Guidance Settings] and push .

NGT0049

3. Highlight [Guidance Voice] and push . The indicator illuminates if voice guidance is activated.

Getting started 2-23

SETTING VOICE GUIDANCE

Black plate (32,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-24 Getting started

Other settings GUID-2B911867-C483-4661-AFB0-53B4A2B9F40F

Voice guidance can also be activated or deactivated using the following procedure.

NGT0050

1. Push .

2. Highlight [Volume & Beeps] and push .

3. Highlight [Guidance Voice] and push .

ADJUSTING VOICE GUIDANCE VO- LUME

GUID-82DCD0CE-A113-4FA5-B49F-E36EC0E9D794

The voice guidance volume can be adjusted.

NRG0081

1. Push .

2. Highlight [Guidance Settings] and push .

NGT0051

3. Highlight [Guidance Volume] and push .

NGT0052

4. Adjust the volume of voice guidance by using the multi-function controller.

Other settings GUID-9B02ECDC-6640-4828-BA30-A00F6055F314

Voice guidance volume can also be adjusted using the following procedure.

NGT0053

1. Push .

2. Highlight [Volume & Beeps] and push .

3. Highlight [Guidance Volume] and push .

4. Adjust the volume of voice guidance by using the multi-function controller.

INFO:

The volume can also be adjusted by turning the audio system volume control knob or pushing +/ on the steering wheel switch while voice guidance is being announced.

Steering wheel switch (page 2-5)

Black plate (33,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUID-FD1FBD10-75D1-4081-91C2-28EA2D9965C8

NISSAN Voice Recognition allows hands-free operation of the navigation system and other systems equipped on this vehicle, such as the phone, vehicle information and audio. NISSAN Voice Recognition can be used in one of two selectable modes, Standard Mode or Alternate Command Mode.

In Standard Mode, the commands that are available are always shown on the display and announced by the system. To perform opera- tions, simply follow the prompts given by the system.

For advanced operation, change to Alternate Command Mode. When this mode is active, an expanded list of commands can be spoken after pushing > on the steering wheel switch and the voice command menu prompts are turned off. Note that in this mode the recognition success rate may be affected because the number of available commands and ways of speaking each command are increased. Otherwise, it is recommended that Alternate Command Mode be turned to OFF and Standard Mode be used for the best recognition performance.

For U.S. customers, Standard Mode is selected by default. For Canadian customers, Alternate Command Mode is the default mode.

Otherwise, it is recommended that Alternate

Command Mode be turned to OFF and Stan- dard Mode be used for the best recognition performance.

INFO:

. For voice recognition system operation related to the phone, audio or vehicle information systems, refer to the Owners Manual of your vehicle.

. When the system language is set to Francais (French) or Espanol (Spanish), the available commands and functions may differ from those that are available when using the system in English.

USING THE SYSTEM GUID-217A7C91-A24A-4CAA-8F70-88C9037B64BF

Initialization GUID-3CE79205-468E-4D21-8B8F-B89EA20C4D01

When the ignition switch is pushed to the ON position, NISSAN Voice Recognition is initia- lized, which may take up to one minute. When completed, the system is ready to accept voice commands. If > is pushed before the initialization completes, the display will show the message: System not ready.

BEFORE STARTING GUID-6E89E7AB-27A3-461E-A6D4-075A500F249F

To get the best recognition performance from NISSAN Voice Recognition, observe the follow- ing points:

. The interior of the vehicle should be as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noise and vibration sounds, etc.), which may prevent the system from correctly recognizing the voice commands.

. The voice recognition system cannot be operated when the soft top is not closed (for Roadster and CrossCabriolet models).

. Wait until the tone sounds before speaking a command.

. Speak in a natural conversational voice without pausing between words.

. If the air conditioner is set to Auto, the fan speed is automatically lowered so that voice commands can be recognized more easily.

GIVING VOICE COMMANDS GUID-4BB6A4C9-7581-46E3-8A47-EAC62DB10347

The method of giving a voice command in Standard Mode is described in this section.

Getting started 2-25

NISSAN VOICE RECOGNITION

Black plate (34,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-26 Getting started

NGT0092Type A

JNB0093XType B

JNB0299XType C

1. Push > located on the steering wheel switch.

NGT0068

2. A list of commands appears on the screen, and the system provides the voice menu prompt Would you like to access Phone, Navigation, Information, Audio or Help?.

3. After the tone sounds and the icon on the screen changes from [ ] to [ ], speak a command.

4. Continue to follow the voice menu prompts and speak after the tone sounds until operation is completed.

Operating tips GUID-CF72C705-9852-45A8-B220-CDE798C9F69C

. Say a command after the tone.

. Commands that are available are always shown on the display and spoken through voice menu prompts. Commands other than those that are displayed are not accepted. Please follow the prompts given by the system.

. If the command is not recognized, the system announces, Please say again. Repeat the command in a clear voice.

. Push once to return to the previous screen.

. To cancel the command, push and hold >. The message, Voice recogni- tion is canceled will be announced.

. Push > to stop the voice prompt and give the command at once. Remember to wait for the tone before speaking.

. To adjust the volume of the system feed- back, push the volume control buttons <+> or <> on the steering wheel switch or use the audio system volume control knob while the system is making an announcement.

Black plate (35,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

COMMAND LIST GUID-47EF5685-2F6A-4988-BBB2-845A602E21A2

Category Command GUID-47EF5685-2F6A-4988-BBB2-845A602E21A2

Command Action

Phone Operates Phone function.

Navigation Operates Navigation function.

Information Displays Vehicle Information function.

Audio Operates Audio function.

Help Displays User Guide.

Navigation Command GUID-47EF5685-2F6A-4988-BBB2-845A602E21A2

Command Action

Destination Home Sets a route to the home location that is stored in the Address book.

Address Searches for a location by the street address specified, and sets a route (for continental U.S. and Canada only).

Places Sets a route to a facility near the current vehicle location.

Address Book Searches for information stored in the Address Book.

Previous Destinations Sets a route to a previous destination.

Phone Command GUID-47EF5685-2F6A-4988-BBB2-845A602E21A2

Command Action

Dial Number Makes a call to a spoken phone number up to 10 digits.

Vehicle Phonebook Makes a call to a contact that is stored in the Vehicle Phonebook.

Handset Phonebook Makes a call to a phone number stored in a mobile phone.

Call History Incoming Calls Makes a call to an incoming call number.

Outgoing Calls Makes a call to a dialed number.

Missed Calls Makes a call to a missed calls number.

Getting started 2-27

Black plate (36,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-28 Getting started

Command Action

International Call Makes an international call by allowing more than 10 digits to be spoken.

Information Command GUID-47EF5685-2F6A-4988-BBB2-845A602E21A2

Command Action

Fuel Economy Displays fuel economy information.

Trip Computer (if so equipped) Displays trip information.

Maintenance Displays maintenance information.

Where am I? Displays GPS information.

Traffic Information Displays the [Info On Route] screen when a route to the destination is set. Displays the [Nearby Traffic Info.] screen when a route to the destination is not set.

Audio Command GUID-47EF5685-2F6A-4988-BBB2-845A602E21A2

Command Action

AM Turns to the AM band, selecting the station last played.

FM Turns to the FM band, selecting the station last played.

XM Turns to the SiriusXM Satellite radio band, selecting the channel last played.

CD Starts to play a CD.

General Commands GUID-47EF5685-2F6A-4988-BBB2-845A602E21A2

Command Action

Go back Corrects the last recognition result to return to the previous screen

Exit Cancels Voice Recognition

Black plate (37,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

INFO:

Refer to the vehicle Owners Manual for the operations related to phone, information and audio.

Voice command examples GUID-64627AA7-123D-4493-AF6F-AED702C85E6D

To use the voice recognition function, speaking one command is sometimes sufficient, but at other times it is necessary to speak two or more commands. As examples, some additional basic operations that are performed by voice com- mands are described here.

Example 1: Placing a call to the phone number 800-662-6200:

GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

1. Push > located on the steering wheel switch.

NGT0070

2. The system announces, Would you like to access Phone, Navigation, Information, Audio or Help?.

3. Speak Phone.

NGT0079

4. Speak Dial Number.

NGT0080

5. Speak 800.

NGT0081

6. The system announces, Please say next three digits or dial, or say change number. Speak 662.

NGT0082

7. The system announces, Please say last four digits or say change number. Speak 6200.

NGT0083

8. The system announces, Dial or Change Number?. Speak Dial.

Getting started 2-29

Black plate (38,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-30 Getting started

NGT0084

9. The system makes a call to 800-662-6200.

INFO:

. Speaking 800-662-6200 (10 continuous digits) or 662-6200 (7 continuous digits) is acceptable, if the area code is not necessary. However the 3-3-4 digit group- ing is recommended for improved recogni- tion.

How to speak numbers (page 9-20)

. The NISSAN voice recognition system is not limited to recognizing phone numbers of only 7 or 10 digits. To dial a number in a format other than the 3-3-4 digit grouping, use the International Call command.

. If Change Number is spoken during phone number entry, the system will automatically request that the number be repeated using the 3-3-4 format. In this case please say the area code first and then follow the prompts.

. Do not add a 1 in front of the area code when speaking phone numbers.

. If the system does not recognize a voice command, please try repeating the com- mand using a natural voice. Speaking too slowly or too loudly may further decrease recognition performance.

Example 2: Placing an international call to the phone number 011-81-111-222-3333:

GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

1. Push > located on the steering wheel switch.

NGT0070

2. The system announces, Would you like to access Phone, Navigation, Information, Audio or Help?.

3. Speak Phone.

NGT0079

4. Speak International Call.

NGT0087

5. Speak 01181111222333.

NGT0088

Black plate (39,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6. Speak Dial.

NGT0089

7. The system makes a call to 011-81-111- 222-3333.

INFO:

Any digit input format is available in the International Number input process.

Example 3: Setting a destination by a street address:

GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

1. Push > located on the steering wheel switch.

NGT0070

2. The system announces, Would you like to access Phone, Navigation, Information, Audio or Help?.

3. Speak Navigation.

JNB0277X

4. Speak Address.

NGT0072

5. Speak the name of the state, California.

NGT0073

6. Speak the name of the city, Gardena.

NGT0093

7. Voice feedback will be provided when the command is accepted, and the list of city names is displayed.

8. After the tone sounds and the icon on the screen changes again, speak One.

Getting started 2-31

Black plate (40,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2-32 Getting started

NGT0074

9. Speak the name of the street, South Figueroa street.

INFO:

Only the official street names stored in the map database can be recognized by the system. To improve accuracy, speak the street name precisely and include Boule- vard, Way, North, South, etc., if known. If unsure of the full name, speaking only part of the street name such as Figueroa is acceptable, but recognition accuracy may be reduced.

NGT0075

10. Voice feedback will be provided when the command is accepted, and the list of street names appears.

11. After the tone sounds and the icon on the screen changes again, speak One.

NGT0076

12. Speak the house number. How to speak numbers (page 9-5)

INFO:

If the house number is unknown, speak No house number.

NGT0077

13. To confirm the destination location on the map, speak Show map. To calculate a route, speak Calculate route.

Black plate (41,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3 Map settings

Map types ...................................................................................... 3-2

2D map .... .............................................................................. 3-2

BirdviewTM (3D) map ............................................................ 3-3

Building graphics ................................................................... 3-3

Displaying the current vehicle location .... ............................ 3-4

Operating with control panel .............................................. 3-4

Operating with touch operation ......................................... 3-4

Moving a map ............................................................................... 3-5

2D map .... .............................................................................. 3-5

BirdviewTM (3D) map ............................................................ 3-7

Changing the scale of a map ................................................... 3-8

Operating with zoom buttons (if so equipped) .... ....... 3-8

Operating with center dial .... ............................................ 3-9

Operating with touch operation ...................................... 3-10

Map scale .... ....................................................................... 3-10

Changing map view .... .......................................................... 3-11

Available views .................................................................. 3-12

Other settings .... ............................................................. 3-12

Setting the map view .............................................................. 3-13

Basic operation ................................................................. 3-13

Setting map orientation .... ............................................ 3-14

Settings long range map view .... ................................ 3-15

Setting map color .... ..................................................... 3-15

Changing BirdviewTM angle ........................................... 3-16

Setting left screen display .... ....................................... 3-17

Looking at information on the map .... ............................... 3-17

Displaying map icons .... ................................................ 3-17

Map scrolling information .... ......................................... 3-18

Map symbols .... ............................................................... 3-20

Road color .... ................................................................... 3-21

Traffic information on map .... ....................................... 3-21

Black plate (42,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3-2 Map settings

GUID-F4B59156-6F28-46D1-977A-28A3BCCE577A

Two types of map views are available: 2D and BirdviewTM (3D) map.

2D MAP GUID-5787C144-120B-47A7-B139-F216D17352B7

2D map displays the map in a 2-dimensional environment similar to a road map.

Screen information GUID-F01251C0-D18B-43A3-A220-DFB89E7B7441

NMA0001

*1 Vehicle icon:

Indicates the current vehicle location and the direction of travel.

*2 Guide point:

Indicates a guide point on the route.

*3 Remaining time and distance to the destination:

Indicates the approximate remaining time and distance to the destination or waypoint.

This indicator will appear when the destina- tion or waypoint is set and route guidance is started.

When the vehicle is not driven on the suggested route, the screen displays the direction to the destination and the dis- tance to the destination from the current vehicle position.

Switching estimated arrival time dis- play (page 5-28)

*4 Suggested route:

Appears in bold yellow during route gui- dance.

*5 / Direction indicator:

Indicates the directional setting of the map. Touch the icon to change the setting.

: North always pointing up.

: Traveling direction always pointing up. Setting map orientation (page 3-14)

*6 Scale indicator:

Indicates the scale of the map.

Touch the icon to display the scale bar.

This allows the map scale to be adjusted. Operating with touch operation (page 3-10)

MAP TYPES

Black plate (43,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

*7 Arrow:

Indicates the distance to the next guide point and the turning direction at that guide point.

*8 Stored location (orange):

Displays the locations that are stored in the Address Book. Icons can be changed according to personal preferences.

Storing location (page 6-2)

*9 Avoid Area (green or blue):

Displays the areas to avoid that are stored in the Address Book with green or blue icons. During the route search, the route guidance is performed by searching for a route that avoids those areas.

Storing avoid area (page 6-7)

*10 Street name:

Displays the name of the street the vehicle is currently driving on.

*11 Traffic indicator:

Displays the reception condition of traffic information transmitted from the provider.

Green: Reception condition is good.

Gray: Reception condition is not good.

No mark: Subscription to NavTraffic service is not detected.

BirdviewTM (3D) MAP GUID-8B301930-702E-4140-BFDB-7D650B4FB8F2

BirdviewTM displays the map from an elevated perspective. In BirdviewTM, it is easy to recog- nize an image of the route because it provides a panoramic view over a long distance.

NMA0002

INFO:

About the BirdviewTM display . BirdviewTM is a registered trademark of

Clarion Co., Ltd.

. The map in BirdviewTM always appears with the current forward direction facing up.

BUILDING GRAPHICS GUID-D6447A26-AD96-4A4F-9E46-28483E3B746D

In the area where the building graphics are stored in the map data, the building graphics are displayed when the map is zoomed in. On the 2D map display, these are called Building footprint graphics, and on the BirdviewTM

display, these are called 3D building graphics.

The method to look at the map is the same for the 2D and BirdviewTM maps.

NMA0003Building footprint graphics (2D map)

NMA00043D building graphics (BirdviewTM map)

INFO:

In the area where the building graphics are not stored in the map data, the normal map is displayed even when the map is zoomed in.

Map settings 3-3

Black plate (44,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3-4 Map settings

GUID-673E2FEB-D719-4219-BB9A-D59663B0D121

OPERATING WITH CONTROL PANEL GUID-2E528B0C-4F88-4394-B6FA-A0A69F69C01C

NMA0005

The basic map screen displays the current location (the position where the vehicle mark is located). Push to display the current location on the map while on any screen.

OPERATING WITH TOUCH OPERA- TION

GUID-D043F365-614D-43CA-8FAE-9AC27A141D2D

NMA0006

After moving the map, touch [BACK] on the map screen to display the current location map

screen.

DISPLAYING THE CURRENT VEHICLE LOCATION

Black plate (45,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUID-272C28C9-4D1F-4FD3-B68D-E3A82A5CFEEA

JNC0111M

The operations for moving across the map are different between the 2D and BirdviewTM maps.

2D MAP GUID-521C6A55-58B6-45AD-9C60-919B2607BE77

Operating with the multi-function con- troller

GUID-B1B79164-1D44-47D4-A02A-276D2E7921E6

Push one of the directional buttons or the slide switch. Press and hold a directional button or the slide switch to move continuously across the map in a direction.

While moving across the map, the cross pointer appears.

If the map scale is set to 1/8 mile (200 m) or

less, the cross pointer will blink in pink when positioned on a street, and the street name will be displayed.

Screen information:

*1 Cross pointer

*2 Distance from the current location to the cross pointer

*3 Street name

Operating with touch operation GUID-7753D029-1306-462F-8CD9-11ED318724D6

NMA0008

1. Touch the screen.

Displays the cross pointer, and the touched position is set as the center of the screen.

NMA0009

2. Touch the direction to move to. The map continues to scroll while the screen is touched.

Map settings 3-5

MOVING A MAP

Black plate (46,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3-6 Map settings

INFO:

While driving, one touch continuous scrolling is disabled. Touch the screen again to scroll further. If the map screen is set to the building footprint graphics, the map cannot be scrolled while driving.

Fine-adjusting the cursor position: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

NMA0010

1. Touch [Slow].

Displays the 8-directional key.

NMA0011

2. Touch the 8-directional key to adjust the cross pointer position. Touch [BACK] to end the adjustment.

INFO:

Fine-adjusting the cursor position is not possible while driving.

Black plate (47,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

BirdviewTM (3D) MAP GUID-7EA6ABC8-EB5C-4945-93BD-7FD463A75207

Operating with multi-function controller GUID-99F5240B-41E8-49E2-828A-761DC10FA669

JNC0112M

Use the multi-functional controller to move across the map.

While moving on the map, the cross pointer appears.

Rotates the map clockwise.

Rotates the map counterclockwise.

The cross pointer moves in the direction of the arrow.

Once moving on the map, the cross pointer

appears.

Screen information:

*1 Cross pointer

*2 Distance from the vehicle position to the cross pointer

*3 Street name

Operating with touch panel GUID-9482DE33-3182-4FBD-8922-9E36E91E2B41

NMA0013

1. Touch the screen.

Displays the cross pointer and 8-directional key.

NMA0014

2. Touch the direction to move to. The map continues to scroll while the screen is touched.

Map settings 3-7

Black plate (48,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3-8 Map settings

NMA0015

3. Touch [ ] or [ ] to change the direction of the map.

Rotates the map clockwise.

Rotates the map counterclockwise.

INFO:

While driving, scrolling on the map is limited to a specified distance.

GUID-8E2F45DB-FDC8-47F4-949D-B351E680797B

OPERATING WITH ZOOM BUTTONS (if so equipped) GUID-CBE67C65-72FD-4F77-87EE-BBB21DD1F6C0

NMA0016

CHANGING THE SCALE OF A MAP

Black plate (49,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Push IN> or OUT>. A scale appears on the right side of the screen.

To view the map in detail, push IN>.

To view a wider area, push OUT> .

The scale will automatically disappear when neither IN> nor OUT> has been pushed for several seconds.

If the scaling operation is not performed for a specified period of time, the scale display disappears.

INFO:

Free zoom: The scale can be changed in smaller steps when IN> or OUT> is pushed and held than when the button is pushed briefly. When the button is pushed briefly, the scale can be changed in large steps.

Other navigation settings (page 8-7)

OPERATING WITH CENTER DIAL GUID-267F7CDA-6A84-46A5-AE89-7A1C6CD8A877

JNC0113M

1. Turn the center dial when the map screen is displayed. The map scale is displayed on the right side of the screen.

2. Use the center dial to adjust the map scale.

*1 Clockwise: Zoom in

*2 Counterclockwise: Zoom out

INFO:

Free zoom: Depending on the setting, using the center dial to change the map scale may adjust the scale normally, or it may engage the free zoom (finer scale adjustment in smaller steps).

Other navigation settings (page 8-7)

Map settings 3-9

Black plate (50,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3-10 Map settings

OPERATING WITH TOUCH OPERA- TION

GUID-47D8ADC6-5C26-4F3A-A0ED-FC7613C6F0A1

NMA0018

1. Touch .

Displays the scale.

NMA0019

2. Touch [ZOOM IN] or [ZOOM OUT] to change the scale.

INFO:

Free zoom: Once the [Small Step Zoom by Dial] is set to ON in the setting screen, the scale can be changed in smaller steps, when [ZOOM IN] or [ZOOM OUT] is pushed and held, than when either button is briefly pushed. If briefly pushed, operation returns to normal.

Voice command

1. Push > located on the steering wheel switch.

2. After the tone sounds, speak a command.

To change the map scale:

Zoom In <1 to 13> (Alternate command mode)

Zoom Out <1 to 13> (Alternate command mode)

MAP SCALE GUID-EA2DF4B2-AB71-43AF-BE75-DA9C76E866ED

Any required map scale (map coverage) be- tween 320 miles (640 km) and 1/64 of a mile (25 m) can be selected.

Scale level for 2D map and BirdviewTM

map (3D) display GUID-4B62EB61-8FB0-4E96-9F92-D6BB3097154A

Normal Map

US Units Metric Units

320 miles 640 km

80 miles 160 km

32 miles 64 km

8 miles 16 km

5 miles 10 km

2 miles 4 km

1 mile 2 km

1/2 mile 1 km

1/4 mile 500 m

1/8 mile 200 m

1/16 mile 100 m

1/32 mile 50 m

Shows build- ing footprint graphics

1/32 mile 50 m

1/64 mile 25 m

NMA0051Example: The most detailed level (2D map)

Black plate (51,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NMA0020Example: The widest level (2D map)

NMA0052Example: The most detailed level (BirdviewTM map)

NMA0021Example: The widest level (BirdviewTM map)

INFO:

The traffic information icons are not displayed on the map screen when the map scale is set to 32 miles (64 km) or higher.

Traffic information display and scale le- vels (page 7-7)

GUID-6C1CB013-9699-497C-9B99-0E3C35B4B19B

The map view can be changed between the 2D and BirdviewTM maps. The map can also be displayed in the split screen mode.

NMA0022

1. Push while the current location map screen is displayed.

NMA0023

2. Highlight [Map View] and push .

Map settings 3-11

CHANGING MAP VIEW

Black plate (52,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3-12 Map settings

NMA0024

3. Highlight [Change View] and push the right button of the directional buttons.

4. Highlight the preferred map view and push . The indicator of the selected map view illuminates.

5. The display automatically returns to the map screen.

AVAILABLE VIEWS GUID-3846B375-BC2C-4941-B1CA-70825D89A947

. [2D map]:

Switches to the 2D map.

. [Birdview (3D)]:

Switches to the BirdviewTM map.

. [Split: 2D Map]:

Changes to the split screen mode and both halves display maps in 2D.

. [Split: BirdviewTM Map]:

Changes to the split screen mode and the left half displays the map in 2D and the right

half displays the map in BirdviewTM.

INFO:

. When the split screen mode is selected, the map settings for the left screen can be changed independently.

Setting left screen display (page 3-17)

. If the split screen mode is selected, the normal map scrolling and scale adjustment are set in the right screen. However, if an icon is touched before adjusting the map direction or scale, then each screen can be adjusted independently.

NMA0025Split: 2D Map

NMA0026Split: BirdviewTM Map

OTHER SETTINGS GUID-80415649-C47F-4665-B7AB-B3843E261AB5

The map view can also be set using the following procedure.

NMA0027

1. Push .

2. Highlight [Navigation] and push .

3. Highlight [Map View] and push .

4. Highl ight [Change View] and push .

5. Highlight the preferred item and push .

Black plate (53,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Voice command

1. Push > located on the steering wheel switch.

2. After the tone sounds, speak a command.

. To display the 2D map:

Plan View map (Alternate command mode)

. To display the BirdviewTM map:

Birdview map (Alternate command mode)

GUID-5D0C353F-6EAA-4917-B80D-BC1735C32503

Other settings are also available for the map screen, such as changing the map direction, map color, BirdviewTM angle, etc.

BASIC OPERATION GUID-A06644B4-1731-4EE3-985A-6B23CAD63C5C

NMA0022

1. Push while the current location map screen is displayed.

NMA0023

2. Highlight [Map View] and push .

NMA0028

3. Highlight [Map Settings] and push .

NMA0029

4. Highlight the preferred item and push .

Available setting items GUID-39500D60-8341-4077-857D-1E1246FC5EF6

. [Map Orientation]:

Set the map direction to North up or Heading Up.

Setting map orientation (page 3-14)

. [Long Range]:

Set the long range map view display ON/

Map settings 3-13

SETTING THE MAP VIEW

Black plate (54,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3-14 Map settings

OFF. Settings long range map view (page 3-15)

. [Map Color]:

Change the map color. Setting map color (page 3-15)

. [Birdview Angle]:

Change the BirdviewTM angle. Changing BirdviewTM angle (page 3-16)

. [Left Split Map Settings]:

Set the map settings for the left screen of the split map.

Setting left screen display (page 3-17)

. [Show all Freeway Exits on Route]/[Auto. Show Turn List on Freeway]:

Set the display of the freeway exit informa- tion ON/OFF.

Show exit information on freeways (page 5-10)

Other settings GUID-A468C1A1-02E5-4654-885A-EB02E6FE218F

The orientation of the map can also be set using the following procedure.

NMA0027

1. Push .

2. Highlight [Navigation] and push .

3. Highlight [Map View] and push .

SETTING MAP ORIENTATION GUID-0F839399-3855-4BDC-92AC-A14A6FD1246A

The map direction (orientation) can also be changed in the 2D map. These settings are available only in the 2D map or 2D/2D split map.

NMA0029

1. Highlight [Map Orientation] and push .

2. Highlight the preferred map orientation and push . The indicator of the selected map orientation illuminates.

3. Push to return to the current location map screen.

Available map orientations GUID-CAF9F37A-ABEB-4976-9920-B27070BA4034

. [North Up]:

North is set at the top of the map.

. [Heading Up]:

The traveling direction is set at the top of the map.

INFO:

If the map orientation is switched, the icon displayed in the lower left corner is also switched.

: North Up

: Heading Up

Black plate (55,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

JNC0201XNorth Up

JNC0202XHeading Up

INFO:

Touching the icon on the map screen can also change the direction of the map.

Voice command

1. Push > located on the steering wheel switch.

2. After the tone sounds, speak a command.

To change the map direction:

North Up (Alternate command mode)

Heading Up (Alternate command mode)

SETTINGS LONG RANGE MAP VIEW GUID-57A06B4D-3218-4EB6-B528-9D7D64C37F6A

The position of the vehicle icon can be changed to view a wider area in the traveling direction. If this function is activated, the vehicle icon is located slightly lower than the center of the screen.

NMA0034

1. Highl ight [Long Range] and push . The indicator illuminates.

2. Push to return to the current location map screen.

NMA0035Long Range Map View

INFO:

[Long Range] is displayed only when [Heading Up] is selected.

SETTING MAP COLOR GUID-61ED4E19-3537-4179-869A-44708F922089

The map color can be changed to a warm or cool color, or a light color to emphasize the traffic information.

NMA0036

1. Highlight [Map Color] and push .

Map settings 3-15

Black plate (56,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3-16 Map settings

NMA0037

2. Highlight the preferred map color and push . The indicator light of the se- lected color illuminates.

Available map colors GUID-C0CC4E68-749D-48BF-8AE3-5B992AB48342

. [Warm]:

Set warm colors for the map coloring.

. [Cool]:

Set cool colors for the map coloring.

. [Traffic Emphasis]:

Set light colors for the map coloring to emphasize the traffic information.

INFO:

The effect of setting changes can be confirmed on the preview displayed on the right side of the screen.

CHANGING BirdviewTM ANGLE GUID-60F52783-9F57-4E9B-99E2-57D86595A4D9

The BirdviewTM angle can be changed.

This setting is available only in the BirdviewTM

map or 2D/BirdviewTM split map.

NMA0038

1. Highlight [Birdview Angle] and push .

NMA0039

2. Adjust the BirdviewTM angle using the multi- function controller.

3. Push to return to the current location map screen.

Black plate (57,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

SETTING LEFT SCREEN DISPLAY GUID-FAC785A5-ACC7-42CF-AE5F-2321C1BAECC2

When the split screen is displayed, the map settings of the left screen can be changed.

NMA0040

1. Highlight [Left Split Map Settings] and push .

NMA0041

2. Highlight the preferred map view and push .

3. Push to return to the current location map screen.

Available setting items GUID-CD5AEAB8-1D33-4266-865F-4C8B41A82558

. [Map Orientation]:

The map direction can be selected as follows.

[North Up]: North is set at the top of the map.

[Heading Up]: The traveling direction is set at the top of the map.

. [Long Range]:

The vehicle icon is located slightly lower than the center of the screen. This offers a wider view in the traveling direction.

. [Map Scale]:

A scale appears on the left side of the screen. This changes the scale of a map.

INFO:

. The settings of the right screen are the same as the settings of the full screen map.

. Touching the icon on the map can also change the direction and scale of the map.

GUID-7DCD5EF2-BD0E-491D-A240-05AC6FFA375A

Icons of particular facilities can be displayed on the map.

DISPLAYING MAP ICONS GUID-05F8FD82-0E24-404F-8411-430C5FB86467

Map icons can be displayed or hidden by type.

NMA0053

1. Push while the current location map screen is displayed.

NMA0042

2. Highlight [Map Icons] and push .

Map settings 3-17

LOOKING AT INFORMATION ON THE MAP

Black plate (58,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3-18 Map settings

NMA0043

3. Highlight the preferred icon and push . The icon display setting toggles between on and off each time is pushed. The indicator of the selected icon illuminates.

NMA0044

4. Push to return to the current location map screen. The activated icons are displayed on the map.

INFO:

If registered in the map data, the brand icons will be displayed on the map instead of the general map icons listed below.

Map icons that can be displayed GUID-EE611836-A349-4052-B75D-94239FCDFE63

. Restaurant

. Gas Station

. Hotel

. ATM

. Rest Area

Other settings GUID-452D507D-463E-48A7-81B8-EEC53A39FB71

Landmark icons can also be set using the following procedure.

NMA0045

1. Push .

2. Highlight [Navigation] and push .

3. Highlight [Map Icons] and push .

INFO:

The map icons are not displayed on the map screen when the map scale is set to 1/4 mile (500 m) or higher in the 2D map, or to 1 mile (2 km) or higher in BirdviewTM map.

MAP SCROLLING INFORMATION GUID-3EB0B195-B703-495B-B5A4-269639A27C0D

Information about the location, on which the center of the cross pointer is placed by scrolling on the map, can be set to be displayed.

1. Push .

NMA0046

2. Highlight [Navigation] and push .

Black plate (59,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NMA0047

3. Highlight [Others] and push .

NMA0048

4. Highlight [Map Scrolling Information] and push .

NMA0049

5. Highlight the preferred information item and push . The indicator of the selected information item illuminates.

Available information items:

. [Address Book Icons]

. [Destination/Waypoint Icons]

. [Latitude/Longitude Info.]

NMA0050

6. Push to return to the current location map screen. Move the cross pointer to the set location to display the information.

Map settings 3-19

Black plate (60,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3-20 Map settings

MAP SYMBOLS GUID-FC1FD5A7-448C-4826-9850-38E2CAAC41DF

This navigation system uses symbols to display facilities.

NMA0054

Black plate (61,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

ROAD COLOR GUID-B99CF0C0-685F-443B-94DB-D36C6A84E51D

The road types are differentiated by colors.

Freeway: Red or Light Red (zoomed in)

Main road: Brown or Dark Yellow

Narrow street: Gray

Road with incomplete map data: Dark green

TRAFFIC INFORMATION ON MAP GUID-A9CFEBA6-5A70-41CF-9024-C18694ABF410

With a subscription to NavTraffic service, traffic information is displayed.

Viewing available traffic information (page 7-3)

Free Flow: Green arrow

Moderate traffic: Yellow arrow

Heavy traffic: Red arrow

Section affected by serious traffic event: Purple dashed arrow

Traffic information icons:

Accident

Closed road

Information

Road work

Slippery road

Weather

Incident

Map settings 3-21

Black plate (62,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3-22 Map settings

MEMO

Black plate (63,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

4 Setting destination

Destination screen .... ................................................................ 4-2

Basic operation .... ................................................................ 4-2

Changing region .... .............................................................. 4-2

Finding address .... ............................................................... 4-4

Finding place .... .................................................................... 4-5

Setting home as destination ............................................ 4-10

Searching from address book ......................................... 4-11

Setting previous destination .... ...................................... 4-12

Setting previous start point .... ..................................... 4-13

Setting from stored routes ............................................. 4-14

Setting by phone number .... ........................................ 4-14

Setting freeway entrance/exit ........................................ 4-15

Setting intersection .......................................................... 4-17

Setting city center ............................................................ 4-18

Setting point on map .... ................................................ 4-19

Delete destination .................................................................... 4-20

Black plate (64,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

4-2 Setting destination

GUID-B4313A38-BC05-4348-8845-A6EB7060328D

There are several methods available to set a destination. Understand the advantages of each method and select the best method for finding and setting a preferred destination.

NDE0001

BASIC OPERATION GUID-5707D4BF-15D1-4042-B359-05757083C0B0

1. Push .

2. Highlight the preferred destination setting method and push .

Available setting items GUID-BFB0B4E2-15DF-4F01-A6AA-AFAC9A3A521D

. [Street Address]:

Searches for a destination by address.

. [Places]:

Searches for a destination from various categories of businesses or locations.

. [Home]:

Searches for a route from the current location to the previously stored home destination.

. [Address Book]:

Searches for a destination from the list of the stored locations.

. [Previous Destinations]:

Searches for a destination from the previous destinations.

. [Delete Destination]:

Deletes the currently set destination.

Available setting items (next page screen)

GUID-C350C501-AE78-4D42-AB5D-BC52285217A5

. [Previous Start Point]:

Sets the previous starting point as the destination.

. [Stored Routes]:

Selects a stored route.

. [Phone Number]:

Searches for a point of interest by a telephone number.

INFO:

The system cannot be used to search for residential phone numbers. . [Freeway Entrance/Exit]:

Searches for a destination from a freeway entrance/exit.

. [Intersection]:

Searches for a destination from intersec- tions.

. [City Center]:

Sets the center of a city as the destination.

CHANGING REGION GUID-A63AEEF5-3F7B-45D0-A675-62844EE6BD00

When setting a destination, the location can be narrowed down by specifying the region or city.

Specifying the region GUID-DD861C51-4DC1-4A4E-9C25-815A4FBDAAC8

NDE0002

1. Push .

2. Highlight [Change Region] and push .

DESTINATION SCREEN

Black plate (65,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NDE0003

3. Highlight the preferred region and push .

Available setting items: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

. US1: CA, NV

. US2: AZ, CO, ID, MT, NM, OR, UT, WA, WY

. US3: IA, KS, MN, MO, ND, NE, SD

. US4: AR, LA, MS, OK, TX

. US5: IL, IN, MI, WI

. US6: DC, DE, KY, MD, OH, PA, VA, WV

. US7: CT, MA, ME, NH, NJ, NY, RI, VT

. US8: AL, FL, GA, NC, SC, TN

. US9: AK

. US10: HI

. Canada

INFO:

. It is also possible to select a region by touching the map on the right side of the screen.

. It is not possible to search for a route from the continental United States to Hawaii.

Specifying city GUID-E0B1EA97-7639-4FE2-B9EA-1E082CEC5378

When searching for a destination with Places, Freeway Entrance/Exit, Intersection or City Center, the search can be narrowed down by specifying the city.

NDE0004

1. Highlight [Select a City] and push .

NDE0010

2. Enter the name of the city, highlight [List] and push .

A list screen is displayed.

INFO:

. The same screen will be displayed when a location is searched from a street address, and when [City] is highlighted and is pushed.

Finding address (page 4-4)

. Highlight [Last 5 Cities] and push to display 5 cities recently set as destinations.

Setting destination 4-3

Black plate (66,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

4-4 Setting destination

NDE0005

3. Highlight the city of the destination from the list and push .

INFO:

In some cases, when a city name has been entered, the number of matching destinations in the Matches column may be different from the number displayed on the list screen. If this occurs, enter more characters to further reduce the number of matches.

FINDING ADDRESS GUID-07602D77-5335-4201-ADE2-0E92B1B883AF

When the address of the destination is available, use this method to enter the address and then have the system calculate a route. A location near the preferred destination can also be searched for by entering the house number if the map data contains the relevant data.

NDE0006

1. Push , highlight [Street Address] and push . A character input screen is displayed.

NDE0007

2. Enter the house number, highlight [OK] and push . If the house number is not available, highlight [No House #] and push . A street name input screen is displayed.

NDE0008

3. Enter the name of the street. After finishing the entry, highlight [List] and push . A list of streets is displayed.

INFO:

When [City] is highlighted and pushed, a city can be specified by typing the city name.

Specifying city (page 4-3)

NDE0009

4. Highlight the correct street of the destina- tion from the list and push .

Black plate (67,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

INFO:

In some cases, when a street name has been entered, the number of matching destinations in the Matches column may be different from the number displayed on the list screen. If this occurs, enter more characters to further reduce the number of matches.

NDE0011

5. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push . The system sets the destination to the selected location and starts calculat- ing a route.

INFO:

Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc.

Procedures after setting destination

(page 5-2)

Voice command

1. Push > located on the steering wheel switch.

2. After the tone sounds, speak a command.

To set the destination from a street address:

Navigation Address (Standard mode)

Address (Alternate command mode)

INFO:

When using a voice command to set a street name, the complete street name is recom- mended to be stated.

Examples:

Correct input North Elm Street East Jefferson Boulevard

Incorrect input Elm Street East Jefferson

FINDING PLACE GUID-3DDEE2B7-BD88-493F-BB9C-A2A23D890CB2

There are 3 methods to set the destination to places of interest: typing the name, choosing a category or selecting a Zagat reviewed location. To help improve searching, different start points can be chosen to search from such as Near Current Location, Near the Destination, or a City Center.

Finding nearby place GUID-52051353-8473-4C50-93CA-11C08E61AD8D

NDE0012

1. Push .

2. Highlight [Places] and push .

NDE0013

3. Highlight the preferred nearby category from the list and push .

A list screen is displayed.

INFO:

Highlight [Customize Nearby Places] to customize the nearby places list to show categories that are frequently used.

Setting destination 4-5

Black plate (68,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

4-6 Setting destination

NDE0014

4. Highlight the preferred destination from the list, and push . The position of the selected location is displayed in the preview on the right side of the screen.

INFO:

. A maximum of 100 facilities can be displayed on the list screen.

. To search for facilities along your route, select [Show Along Route].

NDE0015

5. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push . The system sets the destination to the selected location and starts calculat- ing a route.

INFO:

If there is a route already set, the newly selected location can substitute a previously set destina- tion or be added to a route already set.

Other settings: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

NDE0016

The destination can also be set by pushing in the current or scrolled location map screen and selecting [Nearby Places].

Voice command

1. Push > located on the steering wheel switch.

2. After the tone sounds, speak a command.

To display the nearby category list and select the destination from it:

Navigation Places (Standard mode)

Places (Alternate command mode)

Searching by other methods GUID-2FD66D7E-D7C7-47C7-A461-3C5A7A26136D

NDE0012

1. Push .

2. Highlight [Places] and push .

Black plate (69,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NDE0017

3. Highlight [All Categories or Name] and push .

NDE0018

4. Set the narrowing down conditions for the landmarks and push .

INFO:

Highlight [Change Region] and push to change the region. A screen for selecting a region is displayed.

Changing region (page 4-2)

NDE0019

INFO:

If [Select a City] is highlighted and is pushed, a city name input screen is displayed. Specify the city to search for before narrowing down the categories.

Specifying city (page 4-3)

NDE0020

5. Highlight the main category from the list and push .

NDE0021

INFO:

To select the category by directly inputting the category name, highlight [Category Search] and push . The category name input screen is displayed.

NDE0022

6. Highlight the subcategory and push .

Setting destination 4-7

Black plate (70,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

4-8 Setting destination

INFO:

Subcategories may not exist depending on the category that is selected.

NDE0023

7. Enter the name of the destination facility and highlight [List], and then push .

The facility list is displayed.

INFO:

. It is not necessary to enter the facility name completely. It is also possible to display the list screen only by highlighting [List] without entering the facility name and pushing .

. The number of narrowed down points are displayed in the Matches column.

. Up to two keywords (part of the facility name) can be entered by highlighting [AND Search] and pushing after entering the first facility name.

NDE0024

INFO:

The facility name can also be entered directly by highlighting [Choose Name] on the main category list screen and pushing .

NDE0025

8. Highlight the preferred destination from the list, and push .

INFO:

. By highlighting [Sort] and pushing , options can be sorted from [By Name] or [By Dist.]. When selecting [By Dist.], the position of the selected location is displayed in the preview on the right side of the screen.

. In some cases, when a facility name has been entered, the number of matching destinations in the Matches column may be different from the number dis- played on the list screen. If this occurs, enter more characters to further reduce the number of matches.

. The search conditions can be changed by highlighting [Refine].

NDE0026

9. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination and push . The system sets the destination

Black plate (71,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

to the selected location and starts calculat- ing a route.

INFO:

Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc.

Procedures after setting destination (page 5-2)

Searching for restaurant by ZAGAT GUID-5805F8A8-7CDD-4B51-8C4D-79D571DACDE0

NDE0012

1. Push .

2. Highlight [Places] and push .

NDE0027

3. Highlight [ZAGAT] and push .

NDE0028

4. Highlight the preferred state and push . A list screen is displayed.

NDE0029

5. Highlight the preferred city and push . A list screen is displayed.

NDE0030

6. Highlight [RESTAURANT] and push . A list screen is displayed.

NDE0031

7. Highlight the preferred category and push . A list screen is displayed.

Setting destination 4-9

Black plate (72,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

4-10 Setting destination

NDE0032

8. Highlight the preferred sorting order and push . A list screen is displayed.

NDE0033

9. Highlight the preferred destination facility from the list, and then push .

INFO:

. By highlighting [Sort] and pushing , sorting options can be se- lected to re-sort the list.

. The search conditions can be changed by highlight [Refine].

. By highlighting [Ratings] and pushing , an explanation of the ZAGAT ratings can be displayed.

NDE0034

10. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination and pushing . The system sets the destination to the selected location and starts calculat- ing a route.

INFO:

Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc.

Procedures after setting destination (page 5-2)

*C 2009 Zagat Survey, LLC. Zagat Survey is a registered trademark of Zagat Survey, LLC

SETTING HOME AS DESTINATION GUID-F806D824-86A6-4107-911A-3188758F73C8

The home location can be set as the destination to which the system calculates a route. This function is especially useful when searching for a route to return to the home location.

NDE0035

1. Push .

2. Highlight [Home] and push .

NDE0036

3. The home location is displayed and set as the destination.

Black plate (73,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

INFO:

If the home location is not stored yet, the system will automatically display a screen for storing it.

Storing location (page 6-2)

NDE0037

4. The entire route to home is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push . The system sets the destination to the selected location and starts calculating a route.

Voice command

1. Push > located on the steering wheel switch.

2. After the tone sounds, speak a command.

To set the home location as the destination:

Navigation Destination Home (Standard mode)

Destination Home (Alternate command mode)

SEARCHING FROM ADDRESS BOOK GUID-879543E4-E927-408E-B827-8B554286DD90

A location stored in the Address Book can be set as the destination to which the system calculates a route. To utilize this function more effectively, destinations that are often traveled to should be stored in advance.

NDE0038

1. Push .

2. Highlight [Address Book] and push . A list screen is displayed.

NDE0039

3. Highlight the preferred location from the list and push .

INFO:

Selecting [Sort] displays a list of various sort functions. To use the sort functions, stored locations must be set in advance.

Storing location (page 6-2)

NDE0040

INFO:

*1 Sort by Number:

The Address Book entries are displayed in ascending numerical order.

*2 Sort by Name:

The Address Book entries are displayed in alphabetic order.

*3 Sort by Icon:

By selecting a particular icon, a list that contains only the Address Book entries

Setting destination 4-11

Black plate (74,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

4-12 Setting destination

associated with that icon is displayed.

*4 Sort by Group:

By selecting a particular group (family, friends, leisure, etc.), the selected group is displayed at the top of the list.

NDE0041

4. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push . The system sets the destination to the selected location and starts calculat- ing a route.

INFO:

Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc.

Procedures after setting destination (page 5-2)

Voice command

1. Push > located on the steering wheel switch.

2. After the tone sounds, speak a command.

To set the destination from the Address Book:

Navigation Address Book (Standard mode)

Address book (Alternate command mode)

SETTING PREVIOUS DESTINATION GUID-961FF82B-37C8-423A-89D5-7F56A3D728C5

A previously set destination can be set again as the destination to which the system calculates a route. Up to 300 previous destinations will be automatically stored.

If the number of previous destinations exceeds 300, the oldest one will be replaced by the new one.

NDE0042

1. Push .

2. Highlight [Previous Destinations] and push . A list screen is displayed.

NDE0043

3. Highlight the preferred destination from the list and push .

INFO:

By highlighting [By Date], the list can be sorted in chronological order. By highlight- ing [By Name], it can be sorted in alphabe- tical order.

NDE0044

4. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push . The system sets the destination

Black plate (75,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

to the selected location and starts calculat- ing a route.

INFO:

Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc.

Procedures after setting destination (page 5-2)

Voice command

1. Push > located on the steering wheel switch.

2. After the tone sounds, speak a command.

To display the Previous Destinations list:

Navigation Previous Destinations (Standard mode)

Previous Destinations (Alternate command mode)

SETTING PREVIOUS START POINT GUID-D3EABC23-3672-48AE-8031-57802CDCA4EF

The start point of the previous route guidance can be set as the destination to which the system calculates a route.

NDE0045

1. Push .

2. Highlight [Next Page] and push .

NDE0046

3. Highlight [Previous Start Point] and push .

NDE0047

4. The previous start point is set as a destina- tion, and the entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push . The system sets the destination to the selected location and starts calculating a route.

INFO:

Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc.

Procedures after setting destination (page 5-2)

Voice command

1. Push > located on the steering wheel switch.

Setting destination 4-13

Black plate (76,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

4-14 Setting destination

2. After the tone sounds, speak a command.

To set the previous start point as the destination:

Previous Start Point (Alternate command mode)

SETTING FROM STORED ROUTES GUID-69E3A472-F9B2-47DD-9E00-E7811C68452B

A preferred route can be selected from the stored routes.

NDE0045

1. Push .

2. Highlight [Next Page] and push .

NDE0048

3. Highlight [Stored Routes] and push . A list screen is displayed.

NDE0049

4. Highlight the preferred route from the list and push . The route to the destination is set.

NDE0050

5. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push . The system sets the destination to the selected location and starts calculat- ing a route.

INFO:

. Even after setting a destination, the location of the destination can be adjusted, the location can be stored, etc.

Procedures after setting destination (page 5-2)

. The stored route includes only locations (destination and waypoints) and route cal- culation conditions, not the route itself. Therefore, when the destination is set using a stored route, a different route may be suggested if the current vehicle location is different from the one when the route was stored.

SETTING BY PHONE NUMBER GUID-53B1745A-9772-4C56-B01F-3454785345FF

If the telephone number of the facility is available, use this to find the facility by entering the number, and then have the system calculate a route.

INFO:

. Telephone numbers that were stored for stored destinations can also be used.

. If the area code of the specified telephone number does not exist in the map data, the system will not search for the location.

Black plate (77,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

. Only the locations included in the database in the map data can be searched by the phone number. Residential phone numbers cannot be used to search for a location.

NDE0045

1. Push .

2. Highlight [Next Page] and push .

NDE0051

3. Highlight [Phone Number] and push . The telephone number input screen is displayed.

NDE0080

4. Enter the telephone number including the area code.

5. After finishing the entry, highlight [List] and push .

Number input screen (page 2-16)

NDE0081

6. Displays a list screen if there are two or more search results. Highlight the preferred destination from the list and push .

A confirmation screen for the place name and the location is displayed, and the system starts calculating.

NDE0082

7. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push . The system sets the destination to the selected location and starts calculat- ing a route.

INFO:

Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc.

Procedures after setting destination (page 5-2)

SETTING FREEWAY ENTRANCE/EXIT GUID-E4CA34C9-8760-4A9A-9D8A-9FCCEA257ECB

The entrance or exit of a freeway can be set as the destination to which the system calculates a route.

Setting destination 4-15

Black plate (78,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

4-16 Setting destination

NDE0045

1. Push .

2. Highlight [Next Page] and push .

NDE0055

3. Highlight [Freeway Entrance/Exit] and push . A character input screen is displayed.

NDE0056

4. Enter the name of the freeway.

5. After finishing the entry, highlight [List] and push .

NDE0057

6. Highlight the freeway of the destination from the list, and push .

NDE0058

7. Highlight [Entrance] or [Exit] and push . A list screen is displayed.

NDE0059

8. Select the preferred destination from the list. The position of the selected location is displayed in the preview on the right side of the screen. Then, push .

Black plate (79,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NDE0060

INFO:

By selecting [By Distance], the list can be sorted by the nearest distance.

NDE0061

9. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push . The system sets the destination to the selected location and starts calculat- ing a route.

INFO:

Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc.

Procedures after setting destination (page 5-2)

SETTING INTERSECTION GUID-1B1B9664-0225-414E-88F2-3ED86437A881

An intersection of any two streets can be set as the destination to which the system calculates a route.

NDE0045

1. Push .

2. Highlight [Next Page] and push .

NDE0062

3. H igh l igh t [ In te rsect ion ] and push . A character input screen is displayed.

NDE0063

4. Enter the name of the 1st street.

After finishing the entry, highlight [List] and push . A list screen is displayed.

Setting destination 4-17

Black plate (80,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

4-18 Setting destination

NDE0064

5. Highlight a street as the 1st street from the list and push . A character input screen is displayed.

NDE0065

6. Enter the name of the 2nd street.

After finishing the entry, highlight [List] and push . A list screen is displayed.

NDE0066

7. Highlight a street as the 2nd street from the list and push .

NDE0067

8. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push . The system sets the destination to the selected location and starts calculat- ing a route.

INFO:

Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc.

Procedures after setting destination (page 5-2)

SETTING CITY CENTER GUID-4EF2ECE0-5615-4834-9940-392782BC9C2C

The system can calculate a route to the center of a city, without setting a specific location.

NDE0045

1. Push .

2. Highlight [Next Page] and push .

NDE0068

Black plate (81,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3. High l ight [Ci ty Center ] and push . A character input screen is displayed.

NDE0069

4. Enter the name of the city, highlight [List] and push . A list screen is displayed.

INFO:

Highlight [Last 5 Cities] and push to display 5 cities recently set as destinations.

NDE0070

5. Highlight the preferred destination from the list and push . The position of the selected location is displayed in the preview on the right side of the screen.

NDE0071

INFO:

By selecting [By Distance], the list can be sorted by the nearest distance.

NDE0072

6. The selected destination is displayed at the center of the map. Highlight [Start] after confirming the location of the displayed destination, and push .

The system sets the destination to the selected location and starts calculating a route.

INFO:

Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc.

Procedures after setting destination (page 5-2)

SETTING POINT ON MAP GUID-180D3527-CD6C-4E3F-8E9D-E1060655A99B

A location scrolled to on the map can be set as the destination to which the system calculates a route.

NDE0073

1. Scroll the map, place the cross pointer over the preferred location, and push .

Setting destination 4-19

Black plate (82,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

4-20 Setting destination

INFO:

. Adjust the map scale to search for a location more effectively.

. The point on the blinking road where the center of the cross pointer is located can be set as a destination.

NDE0074

2. Highlight [New Dest.] and push .

INFO:

For the items except for [New Dest.], refer to Map menu screen.

Scrolled location map screen (page 2-18)

NDE0075

3. The system sets the destination to the selected location and starts calculating a route.

NDE0076

INFO:

If a point on a freeway is set as the destination, a confirmation message is displayed.

GUID-4C7CF8AC-468B-4231-BCE0-FDF0CCE318A6

It is possible to delete a destination and all waypoints that have already been set.

NDE0078

1. Press .

2. Select [Delete Destination] and press .

NDE0079

3. A confirmation message is displayed. Select [Yes] and press .

The destination and the waypoints are deleted.

DELETE DESTINATION

Black plate (83,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

INFO:

The deleted destination and waypoints are not able to be reactivated.

Voice command

1. Push > on the steering wheel.

2. After the tone sounds, speak a command.

To delete a destination and all waypoints:

Delete Destination (Alternate Command Mode)

Setting destination 4-21

Black plate (84,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

4-22 Setting destination

MEMO

Black plate (85,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5 Route guidance

Procedures after setting destination .... ................................ 5-2

Available items after setting destination .... .................... 5-2

Starting route guidance .... ................................................. 5-2

Selecting route ....................................................................... 5-3

Confirming route .... .............................................................. 5-3

Moving location of destination .... ..................................... 5-4

Storing location ...................................................................... 5-5

Viewing information about searched location .... .......... 5-5

About route guidance .... .......................................................... 5-7

Voice guidance during route guidance ............................ 5-7

Guidance screens and preview mode .... ....................... 5-7

Guidance screen settings .... ............................................. 5-9

Route screen .... ....................................................................... 5-12

Basic operation .... ............................................................. 5-12

Canceling/reactivating route .......................................... 5-13

Editing route .... ................................................................ 5-14

Confirming route ............................................................... 5-18

Guidance settings .... ...................................................... 5-20

Recalculating route .... .................................................... 5-21

Setting detour route .... .................................................. 5-22

Searching for detour route taking traffic information into consideration .... ....................................................... 5-22

Setting conditions for route calculation ...................... 5-23

Route guidance settings ........................................................ 5-26

Basic operation ................................................................. 5-26

Setting voice guidance at intersections .... ............... 5-27

Displaying small turn arrow on map .... ...................... 5-28

Switching estimated arrival time display .... .............. 5-28

Set average speeds .... .................................................. 5-29

Black plate (86,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-2 Route guidance

GUID-CC70DDA0-1AA2-4D42-8B04-4153E5EBE886

After performing a route search, the route guidance can be started immediately. Also, it is possible to confirm or change a route.

NRG0001

AVAILABLE ITEMS AFTER SETTING DESTINATION

GUID-A47B4750-176F-4C53-9AC8-51D6C792BCDA

. [Start]:

Starts route guidance to the selected destination.

Starting route guidance (page 5-2)

. [More Routes]:

Displays 3 alternative routes. Selecting route (page 5-3)

. [Add/Route Info]:

Displays the route information or add a destination or a waypoint.

Confirming route (page 5-3)

. [Move Location]:

Displays a map screen and allows the location of the destination to be adjusted.

Moving location of destination (page 5-4)

. [Store Location]:

Stores the location in the Address Book. Storing location (page 5-5)

. [Place Info]:

Displays information about the facility that is set as the destination if it is included in the map data.

Viewing information about searched location (page 5-5)

INFO:

. If no operations are performed on the system for several seconds, [Start] is auto- matically selected, and the system starts route guidance.

. When using waypoints, [More Routes] is disabled. After the route is started, push then select [Edit/Add to Route] to change the route between each waypoint.

Editing route (page 5-14)

. The same screen as when [Move Location] is selected can be displayed with the following operations:

Touching the map screen

Pushing the directional buttons except for the up/down button (multi-function controller with directional buttons)

Pushing the slide switch except in the upward/downward direction (multi-func- tion controller without directional but- tons)

STARTING ROUTE GUIDANCE GUID-78EFC187-01E3-4CA2-A16E-B598AC1FEF23

NRG0001

1. Highlight [Start] and push .

Route guidance starts.

PROCEDURES AFTER SETTING DESTINATION

Black plate (87,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

SELECTING ROUTE GUID-081AF529-8C2B-4896-8C34-5CC4E74C4BE8

NRG0002

1. Highl ight [More Routes] and push .

NRG0003

2. Highlight the preferred route condition and push .

3. The display automatically returns to the previous screen.

Available route conditions GUID-77C67769-D1D2-4DC8-9B84-9853BACE6F91

. [Short. Time] (purple):

Prioritizes by the shortest time.

. [Min. Freeway] (orange):

Minimizes the use of freeways.

. [Short. Dist.] (green):

Prioritizes by the shortest distance.

INFO:

. When a route condition is selected, a preview is displayed on the right side of the screen.

. The 3 routes may not always be different.

CONFIRMING ROUTE GUID-E49AECBB-3664-428D-A6E7-801967770B0B

NRG0004

1. Highlight [Add/Route Info] and push .

2. Highlight the preferred information item and push .

3. Push to return to the previous screen.

NRG0005

Available information GUID-FA3F9A77-9844-4FFF-B2FC-C8511EBE6BE7

. [Turn List]:

Displays the details of the suggested route. Using turn list (page 5-19)

. [Preview]:

The system will trace the planned route going forward or in reverse.

Using route preview (page 5-19)

. [Add Way Pt.]:

Add a waypoint or a destination. Adding destination or waypoint (page 5-4)

. [Store Route]:

A calculated route can be stored. A max- imum of 5 routes can be stored. Stored routes can be easily retrieved and set as the suggested route.

Storing route (page 6-5)

Route guidance 5-3

Black plate (88,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-4 Route guidance

. [Map Scroll]:

Displays a map screen where the location of the destination can be confirmed.

The same screen as when [Map Scroll] is touched can be displayed with the following operations:

Touching the map screen.

Pushing the directional buttons except for the up/down button (multi-function controller with directional buttons).

Pushing the slide switch except in the upward/downward direction (multi-func- tion controller without directional but- tons).

Adding destination or waypoint GUID-15E53624-2CC6-4105-96F5-4AC26112615E

Before starting route guidance, destinations and/or waypoints can be added. A total of 6 destinations or waypoints can be set.

NRG0006

1. Highlight [Add Way Pt.] and push .

NRG0007

2. Set additional destinations or waypoints and push .

The method of searching for a location is the same as the one for a destination.

4. Setting destination

NRG0008

3. Highlight [Add Destination] or [Add Way- point] and push .

NRG0009

4. The system starts calculating a route that includes the added destination or waypoint. When the calculation is finished, the route is displayed.

INFO:

. If a waypoint was added, [More Routes] cannot be selected.

. If a destination was added, the prior destination becomes a waypoint.

MOVING LOCATION OF DESTINATION GUID-D8A18B0E-A092-44A7-8655-FC3F4F0638C2

The location of the destination can be adjusted by moving the cross pointer across the map.

Black plate (89,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NRG0085

1. Highlight [Move Location] and push .

INFO:

The screen for adjusting the location also changes by touching the map screen dis- played on the right side of the screen.

NRG0086

2. Adjust the location by moving the cross pointer across the map and push . The location of the destination is modified.

INFO:

. The map scale can be changed by pushing IN> or OUT> (if so equipped). The map scale can also be changed by touching the scale icon.

. The same screen as when [Move Location] is touched can be displayed with the following operations:

Touching the map screen.

Pushing the directional buttons except up/down buttons (multi-function control- ler with directional buttons).

Pushing the slide switch except upward/ downward (multi-function controller with- out directional buttons).

STORING LOCATION GUID-2C0D9103-16C4-4B17-8344-FD9DDDFAEA38

A searched location can be stored in the Address Book. Then it can be easily retrieved and set as a destination (or waypoint).

NRG0087

1. Highlight [Store Location] and push .

NRG0088

2. The location is stored in the Address Book. The corresponding icon is displayed at the set location on the map.

VIEWING INFORMATION ABOUT SEARCHED LOCATION

GUID-9D0F6DB1-9A69-4BAB-8D5B-154EBC40AC56

Information (street address and phone number) about places stored in the map data can be displayed.

Route guidance 5-5

Black plate (90,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-6 Route guidance

NRG0089

1. Select [Place Info] and push .

JNE0141X

2. Information about the location is displayed.

3. Push to return to the previous screen.

INFO:

. If [Call] is displayed on the right side of the screen, it is possible to call the location indicated.

. The Bluetooth Hands-Free Phone system is required to be active and the cellular

phone must be connected to call the location indicated.

. Information about locations is not displayed while driving.

Black plate (91,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUID-437FA6A7-F783-4919-9FB1-667800652A57

After setting the route, select [Start] to begin route guidance.

Throughout route guidance, the system navi- gates through the guide points using visual and voice guidance.

CAUTION

. The navigation systems visual and voice guidance is for reference pur- poses only. The contents of the guidance may be inappropriate de- pending on the situation.

. When driving along the suggested route, follow all traffic regulations (e.g., one-way traffic).

Route guidance (page 10-9)

VOICE GUIDANCE DURING ROUTE GUIDANCE

GUID-10A3C111-08CC-4F86-918C-0ECF4945FE81

When approaching a guide point (intersection or corner), destination, etc. during route guidance, voice guidance announces the remaining dis- tance and/or turning direction. Push to repeat voice guidance.

Example of voice guidance GUID-1B2F733F-51A2-4702-A46B-8B2F52D232E2

NAI0418

*1 In about one quarter mile (400 meters), right (left) turn.

Right (left) turn ahead.

*2 In about one quarter mile (400 meters) freeway entrance on your right onto (road number and direction).

Freeway entrance on your right onto (road number and direction).

*3 In about one mile (1.6 kilometers), exit on your right.

Exit on your right.

*4 You have arrived at your destination. End- ing route guidance.

GUIDANCE SCREENS AND PREVIEW MODE

GUID-C1B6F0B6-5487-4D4C-90AE-8B26AFBDAA3C

Route guidance displays map screens and various information according to the situation.

Route guidance 5-7

ABOUT ROUTE GUIDANCE

Black plate (92,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-8 Route guidance

NRG0010

When route guidance starts, the Small Turn Arrow on Map is displayed in the upper left corner of the map screen. This arrow indicates the turning direction at the next guide point (corner or intersection). The distance is also displayed. At the top of the screen, the distance to the next guide point and the name of the next street to turn on to are displayed. Also, there may be cases that next street names are announced. The Small Turn Arrow on Map can be enabled or disabled by the user.

Displaying small turn arrow on map (page 5-28)

Enlarged intersection view GUID-42701FE0-2C04-4F05-996B-00850FAB29D4

NRG0011

When approaching a guide point, the system automatically changes to the split screen and shows an enlarged view of the intersection in the left screen. After passing through the intersec- tion, the system automatically returns to the full screen mode. To switch to the full screen mode while the enlarged intersection view is dis- played, push . Pushing again displays the enlarged intersection view.

Junction guidance GUID-AE8D0E7C-6AB9-46F7-AEFC-E342868C9E51

NRG0012

While driving on a freeway, when the vehicle is

approximately 1 mile (approximately 2 km) from a junction, the system automatically switches to the split screen and displays an enlarged view of the junction (3D) in the left screen. After passing the junction, the system automatically returns to the full screen mode. To switch to the full screen mode while the enlarged junction view is displayed, push .

Turn list GUID-FCF3D43B-4E93-4A12-8468-3D2E48DE68C3

NRG0016

Depending on the setting, the system can constantly display the split screen and show the turn list in the left screen. When approaching a guide point, the left screen automatically switches to an enlarged view of the intersection. To switch to the full screen mode, push . Pushing again displays the turn list.

Turn list (page 5-8)

Black plate (93,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUIDANCE SCREEN SETTINGS GUID-5906E02A-C1F4-4496-988E-D7B293738590

The guidance screen can be displayed at all times even when the vehicle is located away from the guide point. The screen to be displayed can be set.

Split screen settings GUID-41170BA2-E8EE-4109-BED4-AFBC9756B80F

The display setting on the left-hand side screen shown during route guidance can be changed.

NRG0014

1. Push while the current location map screen is displayed.

2. Highlight [Map View ] and push .

NRG0015

3. Highlight [View Settings] and push .

4. Highlight the preferred screen and push . The indicator of the selected screen illuminates.

Intersection: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

NRG0011

The map screen and the enlarged intersection view can be displayed at the same time.

Push to switch to the full map screen.

Turn list: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

NRG0016

The list screen for showing the guide points to the destination and the map screen can be displayed at the same time. An enlarged intersection view is automatically displayed when the vehicle approaches the guide point.

Turn list can be scrolled using the center dial, the main directional buttons or slide switch by touching the up/down buttons on the screen.

Push to switch to the full map screen. Push again to display the turn list.

Route guidance 5-9

Black plate (94,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-10 Route guidance

Fuel Economy: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

NRG0017

The current fuel consumption rate, average fuel consumption rate, instantaneous fuel consump- tion rate and distance to empty can be displayed on the map screen. An enlarged intersection view is automatically displayed when the vehicle approaches the guide point.

Push to switch to the full map screen.

Push again to display the fuel economy screen. When approaching a guide point, the enlarged view of the intersection is automatically displayed. To display the fuel economy informa- tion, push . To display the map screen, push again.

NOTE:

Use the values displayed on the fuel economy screen as a guide. When the fuel gauge indicates empty or the low fuel warning light illuminates even if the dis-

tance to entry reading indicates a suffi- cient amount of fuel remains, refuel the vehicle as soon as possible.

Full map: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

NRG0018

The current location map is displayed. An enlarged intersection view is automatically dis- played when the vehicle approaches the guide point.

When an enlarged intersection view is dis- played, pushing returns to the map screen.

Show exit information on freeways GUID-B9A8C82D-C541-443B-BFEE-406E1D6F13D8

When the vehicle travels on a highway or a toll road, the display automatically provides exit information in the turn list.

NRG0072

1. Push while the current location map screen is displayed.

2. Highlight [Map View] and push .

NRG0073

3. Highlight [Map Settings] and push .

Black plate (95,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NRG0074

4. Highlight [Show all Freeway Exits on Route] or [Auto. Show Turn List on Freeway] and push . The indicator illuminates when the item is set.

5. Push to return to the current location map screen.

Showing freeway exit information: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

NRG0075

When [Show all Freeway Exits on Route] is set to ON and the route includes a freeway or toll road, all exits along the route which have exit information will be shown in the turn list.

The exit information is shown as icons.

Displaying turn list automatically on free- way:

GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

When [Auto. Show Turn List on Freeway] is set to ON, the turn list will be automatically displayed while the vehicle travels on a freeway or a toll road.

Selecting a waypoint from the exit infor- mation list:

GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

When exit information is displayed in the turn list, a waypoint to a facility located near the freeway exit can be set as a waypoint.

NRG0076

1. Highlight the exit where the exit information icon is displayed, and push . The category list screen is displayed.

NRG0077

2. Highlight the landmark category and push . The list screen for showing facilities located near the freeway exit is displayed.

NRG0078

3. Highlight the preferred facility for the way- point and push .

Route guidance 5-11

Black plate (96,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-12 Route guidance

NRG0079

4. The waypoint is set, and the route search is performed.

Procedures after setting destination (page 5-2)

GUID-EE9980BE-5F52-424F-80D9-7D2C6BD0160D

WARNING

Always stop the vehicle in a safe location before modifying the route conditions.

Modifying the route conditions while driving may cause an accident.

During route guidance, the route conditions can be modified and the route information can be confirmed. Set route conditions according to personal preference.

NRG0019

BASIC OPERATION GUID-94188832-FAB9-427A-8DBB-AC861A9FF13C

1. Push .

2. Highlight the preferred setting item and push .

3. Push to return to the current location map screen.

Available setting items GUID-CAD7B503-AF7B-438E-B691-B25634DB9371

. [Cancel Route/Resume Route]:

Cancel the current route guidance. A canceled route can also be reactivated. If the suggested route is canceled, [Cancel Route] changes to [Resume Route].

Canceling/reactivating route (page 5-13)

. [Edit/Add to Route]:

Edit or add a destination or waypoints to the route that is already set.

Editing route (page 5-14)

. [Route Info]:

Confirm the route by the route information or simulation. The confirmed route can also be stored.

Confirming route (page 5-18)

. [Guidance Settings]:

Activate or deactivate route, voice guidance and/or traffic announcement and adjust the volume level of voice guidance.

Guidance settings (page 5-20)

. [Recalculate]:

Manually search for the route again after changing the search condition.

Recalculating route (page 5-21)

ROUTE SCREEN

Black plate (97,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

. [Detour]:

To detour from the suggested route, calcu- late a route detouring for a specified distance.

Setting detour route (page 5-22)

. [Traffic Detour]:

Manually search for an alternative detour route taking the traffic information into consideration.

Searching for detour route taking traffic information into consideration (page 5-22)

. [Route Settings]:

Change the route calculation conditions anywhere along the route.

Setting conditions for route calcula- tion (page 5-23)

CANCELING/REACTIVATING ROUTE GUID-B9B85A76-9055-41AF-8C96-1CA9A71D696B

A route that is already set can be canceled at any time. If a route is canceled, the destination and waypoints are also deleted.

It is also possible to reactivate a canceled route.

Canceling route GUID-E39C57A3-89AF-41FC-AE6D-5FAA56708F14

NRG0019

1. Push .

2. Highlight [Cancel Route] and push .

NRG0020

3. A confirmation message is displayed.

Highlight [Yes] and push .

The route is canceledd along with the destination and waypoints.

INFO:

Canceling a route does not delete destination and waypoint information completely.

Delete destination (page 4-20)

Voice command

1. Push > located on the steering wheel switch.

2. After the tone sounds, speak a command.

To cancel a route:

Cancel Route (Alternate Command Mode)

Reactivating route GUID-B2D165BD-364D-4E26-A755-078D60243FED

NRG0021

1. Push .

2. Highlight [Resume Route] and push .

Route guidance 5-13

Black plate (98,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-14 Route guidance

NRG0022

3. A confirmation message is displayed. High- light [Yes] and push . The can- celed route is reactivated.

INFO:

If a new route is set, the canceled route cannot be reactivated.

EDITING ROUTE GUID-C6041E77-4F51-4560-8463-40EBF97B1C1F

NRG0023

1. Push .

2. Highlight [Edit/Add to Route] and push .

3. Highlight the preferred condition and push .

4. Push to return to the previous screen. Push to return to the current location map screen.

Available setting items GUID-C2CB37EE-6B43-4740-99D8-5FB1C0105DD2

NRG0024

*1 [Add Destination]: Add a new destination. Setting destination or waypoint (page 5-14)

*2 Current destination:

Change or delete the destination. Editing/deleting destination or way- point (page 5-15)

*3 Condition for calculating a route to the destination:

Change the conditions for calculating a route to the destination.

Changing route calculation condi- tions (page 5-17)

*4 [Add Waypoint]: Add a new waypoint. Setting destination or waypoint (page 5-14)

*5 Current waypoint:

Change or delete the waypoint. Editing/deleting destination or way- point (page 5-15)

*6 Condition for calculating a route to a waypoint:

Change the conditions for calculating a route to a waypoint.

Changing route calculation condi- tions (page 5-17)

*7 [Calculate]:

Manually search for the route again after changing the search conditions.

Changing route calculation condi- tions (page 5-17)

Setting destination or waypoint GUID-2F7DD0F5-9998-43B6-B3D7-BE4C87BFF228

Add a destination or waypoint to the route that is already set. A total of 6 destinations or waypoints can be set.

Black plate (99,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NRG0025

1. Push .

2. Highlight [Edit/Add to Route] and push .

3. Highlight [Add Destination] or [Add Way- point] and push .

If [Add Destination] is selected, the current destination changes to a waypoint.

NRG0026

4. Set a destination or waypoint. The method of searching for a destination or waypoint is the same as the one for a destination.

4. Setting destination

NRG0027

5. The selected location is displayed at the center of the map. Highlight [Add to Route] after confirming the location and push .

INFO:

Even after setting a destination/waypoint, the destination/waypoint location can be adjusted, the route can be stored, etc.

Editing/deleting destination or way- point (page 5-15)

NRG0028

6. Return to the Edit Route screen. Set the route conditions as necessary.

7. Highlight [Calculate] and push . The system will recalculate the routes. After the route search is completed, the display will automatically return to the present location screen.

INFO:

. The prior route is automatically deleted.

. Added waypoints and search conditions will not be taken into consideration for the route calculation until [Calculate] is highlighted and is pushed.

Editing/deleting destination or waypoint GUID-A18D5386-1AD1-47A1-9C97-AE9C567FFFBE

The destination or waypoint that is already set can be modified or deleted.

If a location is modified or deleted when a suggested route is already set, the prior suggested route will be recalculated accord- ingly.

Route guidance 5-15

Black plate (100,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-16 Route guidance

NRG0033

1. Push .

2. Highlight [Edit/Add to Route] and push .

3. Highlight a destination or waypoint that is already set and push .

NRG0029

4. Highlight [Move Dest.] to modify the location and push .

Moving location of destination (page 5-4)

NRG0030

5. Highlight [Delete] and push to delete the location.

NRG0031

6. A confirmation message is displayed. Con- firm the contents of the message, highlight [Yes] and push . The destination or waypoint is deleted from the route. Return to the [Edit Route] screen.

NRG0032

7. By highlighting [Calculate] and pushing , the system will recalculate the routes. After the route search is completed, the display will automatically return to the present location screen.

INFO:

. If the destination is deleted, the final waypoint of the route becomes the destina- tion.

. When the map screen is touched, the same map screen as when [Move Dest.] is selected is displayed.

Changing order of destination and way- points

GUID-75E560A5-40F6-4E97-8D2C-AB04D18E8778

The order of a destination and waypoints that are already set can be changed.

Black plate (101,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NRG0034

1. Push .

2. Highlight [Edit/Add to Route] and push .

3. Highlight a destination or waypoint that is already set and push .

NRG0035

4. Highlight [Change Order] and push . A list of the destination and waypoints is displayed.

NRG0036

5. Highlight a preferred destination or waypoint to replace the previously selected destina- tion or waypoint and push .

NRG0037

6. A message is displayed and the order of the destination or waypoint is changed.

NRG0038

7. By highlighting [Calculate] and pushing , the system will recalculate the routes. After the route search is complete, the display will automatically return to the present location screen.

Changing route calculation conditions GUID-92213992-2A9E-4920-AC58-8532B40B32E5

Each section of the route between waypoints can have different route calculation conditions. After setting these conditions, the entire route can be recalculated.

NRG0039

Route guidance 5-17

Black plate (102,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-18 Route guidance

1. Push .

2. Highlight [Edit/Add to Route] and push .

3. Highlight the preferred section of the route to the destination or waypoint and push .

NRG0040

4. Highlight the preferred condition and push .

Available conditions:

: [Fastest Route]

: [Minimize Freeway]

: [Shortest Route]

NRG0041

5. The condition has been changed and the display returns to the [Edit/Add to Route] screen.

NRG0042

6. By highlighting [Calculate] and pushing , the system will recalculate the routes. After the route search is completed, the display will automatically return to the present location screen.

INFO:

. The recalculated route may not be the shortest route because the system priori- tizes easy-to-drive roads for safety reasons.

. If the route conditions are set from [Route Settings], all sections in the route are subject to the same route conditions. This applies even if different route conditions are set for different sections in [Edit/Add to Route].

CONFIRMING ROUTE GUID-89949D69-1A5F-4776-BF7D-A4707A57DFF2

When the suggested route is displayed after calculation, the route information can be con- firmed or the suggested route simulated.

NRG0043

Black plate (103,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Basic operation GUID-C8286242-0660-45FA-8545-269B1BBE2742

1. Push .

2. Highlight [Route Info] and push .

NRG0044

3. Highlight the preferred item and push .

Available items: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

. [Turn List]:

Displays the details of the suggested route. Using turn list (page 5-19)

. [Preview]:

The system will trace the planned route going forward or in reverse.

Using route preview (page 5-19)

. [Simulation]:

Simulate the suggested route. This function provides a detailed image of the route with voice guidance.

Confirming route by simulation

(page 5-20)

. [Store Route]:

A calculated route can be stored. A max- imum of 5 routes can be stored. Stored routes can be easily retrieved and set as the suggested route.

Storing route (page 6-5)

. [Map Scroll]:

Displays a map screen where the location of the destination can be confirmed.

The same screen as when [Map Scroll] is touched can be displayed with the following operations:

Touching the map screen.

Pushing the directional buttons except for the up/down buttons (multi-function controller with directional buttons).

Pushing the slide switch except in the upward/downward direction (multi-func- tion controller without directional but- tons).

Using turn list GUID-A4885766-9DEB-4AE1-B298-24A085BF6EDE

NRG0045

1. Highlight [Turn List] and push .

2. The information (e.g., intersections) can be confirmed on the route to the destination by scrolling the screen pushing the up and down switches of the main directional buttons, pushing the slide switch upward or downward or rotating the center dial.

3. Push to return to the current location map screen.

Using route preview GUID-E79A9560-BAFA-43DF-B1DD-6653216FC74A

NRG0046

Route guidance 5-19

Black plate (104,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-20 Route guidance

1. Highlight [Preview] and push .

2. Highlight the preferred key and push .

: Moves forward in the direction of the destination.

: Moves backward in the direction of the starting point.

/ : Pauses the route preview.

3. Push to return to the current location map screen.

INFO:

During route preview, the map scale can be changed by pushing IN> or OUT> (if so equipped). While the map scale is being changed, the route preview is temporarily stopped.

Confirming route by simulation GUID-8BE3F36E-4337-4F14-A100-8073942F3A55

NRG0047

1. Highlight [Simulation] and push .

2. Highlight the preferred key and push .

: Pauses the simulation.

: Resumes the simulation.

: Ends the simulation.

3. Push to return to the current location map screen.

INFO:

During simulation, the map scale can be changed by pushing IN> or OUT> (if so equipped). While the map scale is being changed, the simulation is temporarily stopped.

GUIDANCE SETTINGS GUID-32BE779C-B7B9-42E9-8CFB-0B8DEDF21320

Various guidance settings can be set.

NRG0081

Basic operation GUID-8275D15F-335C-4ADE-A2B6-507CFF977AD6

1. Push .

2. Highlight [Guidance Settings] and push .

3. Highlight the preferred item and push .

4. Push to return to the previous screen. Push to return to the current location map screen.

Available setting items GUID-996AA115-07FC-484D-84CE-5B27EF68282B

NRG0048

. [Guidance Voice]:

Activates or deactivates voice guidance. The indicator illuminates if voice guidance is activated.

. [Guidance Volume]:

Adjust the volume level of voice guidance.

. [Traffic Announcement]:

Provides the announcement of the traffic

Black plate (105,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

information event on the route.

Voice command

1. Push > located on the steering wheel switch.

2. After the tone sounds, speak a command.

To turn on or off the Voice Guidance:

Voice Guidance On/Off (Alternate com- mand mode)

RECALCULATING ROUTE GUID-7F48B405-24EE-40C5-A08A-ABE6340EFFB0

The route can be searched for again manually after changing the search condition. When the vehicle deviates from the suggested route, the route from the current location to the destination is automatically searched again.

Re-searching route manually GUID-842F949E-665D-4774-8AF8-238A7C34F688

NRG0049

1. Push .

2. H igh l igh t [Reca lcu la te ] and push .

NRG0050

3. A message is displayed, and the route is recalculated.

NRG0051

4. Set the route conditions. After finishing the sett ing, highl ight [Start] and push .

Procedures after setting destination (page 5-2)

INFO:

When a waypoint has been set on the route, the system will search for only one route even if route recalculation is performed.

Setting Auto Reroute GUID-14F22CB6-A54A-40BD-AED0-09231B8B6C4E

NRG0052

1. Push .

2. Highlight [Route Settings] and push .

NRG0053

3. Highlight [Other Routing Choices] and push .

Route guidance 5-21

Black plate (106,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-22 Route guidance

NRG0054

4. Highlight [Auto Reroute] and push . The indicator for the selected condition illuminates. When the current location map screen or route setting screen is displayed, the system recalculates a route with the set conditions.

Basic operation (page 5-24)

SETTING DETOUR ROUTE GUID-BEAFE0DA-8BCC-4CCB-B14E-64761D153CA1

To detour from the suggested route, a route detouring for a specified distance can be calculated.

NRG0055

1. Push .

2. Highlight [Detour] and push .

NRG0056

3. Highlight a detour distance and push .

After calculating the detour, the system displays the detour route on the map.

INFO:

. When the vehicle has deviated from the suggested route, [Detour] cannot be se- lected.

. If the system cannot calculate a detour with the specified conditions, it displays the previous suggested route.

. If the vehicle is traveling very fast, the detour route may start from a location that the vehicle has already passed.

SEARCHING FOR DETOUR ROUTE TAKING TRAFFIC INFORMATION INTO CONSIDERATION

GUID-9FF32E51-78BB-4BC1-B3A2-C2A21B0F8643

When a serious traffic event occurs on the route, or if the system finds a faster route, a detour alert will pop up automatically. If the automatic alert is missed, a detour can also be searched for manually.

NRG0057

1. Push .

2. Highlight [Traffic Detour] and push .

NRG0058

Black plate (107,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3. When the detour search is successful, detailed information about the detour route (left screen) and the comparison screen of the two routes (right screen) are displayed.

*1 Original route (yellow)

*2 Detour route (pink)

*3 The change of distance and estimated travel time to destination when the detour route is taken.

4. To accept the suggested detour route, highlight [Yes], and then push .

INFO:

. If no route is set, or [Use Real Time Traffic Information] is turned off, this function cannot be operated.

. If no detour route is selected and no further action is provided, the detour route will be automatically canceled.

. The detour suggestion may be retrieved even after the message disappears by manually selecting [Traffic Detour]. The system will then search for the detour again and suggests a detour if one is available at that time.

. Without a subscription to a NavTraffic broadcast, it will not be possible to get a

traffic detour or apply settings for traffic information related functions. A message appears when a related menu item is selected.

. See NOTES ON NavTraffic INFORMA- TION for further information.

Notes on NavTraffic information (page 10-13)

Automatic detour guidance GUID-A1E94808-B77A-4E0E-A64C-7A50347DD3A9

When [Auto Reroute] and [Use Real Time Traffic Information] are turned on in the detailed route settings, a message will automatically pop up when the system finds a detour.

Detailed route settings (page 5-24)

NRG0059

1. If a traffic jam or a serious traffic problem occurs on the route while driving along the suggested route, the automatic detour route search starts and a message pops up if a detour is found.

2. To accept the suggested detour route, highlight [Yes] and push .

INFO:

. If no operation is performed for one minute after the message is displayed, the message disappears. The detour will not be accepted, and the current suggested route will remain unchanged.

. When the [Traffic Announcement] is turned on in the guidance settings, the system will announce voice guidance at the same time that the message appears on the screen.

Guidance settings (page 5-20)

SETTING CONDITIONS FOR ROUTE CALCULATION

GUID-253F8D2B-8A02-47B9-B431-3DA1FCD944B9

Search condition settings GUID-E6EE0920-1044-4A95-80E0-1F3F55CE8575

The route can be recalculated after changing the route calculation conditions anywhere along the route.

Route guidance 5-23

Black plate (108,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-24 Route guidance

NRG0061

Basic operation: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

1. Push .

2. Highlight [Route Settings] and push .

3. Highlight [Basic Route Type] and push .

4. Highlight the preferred condition and push . The indicator for the selected condition illuminates.

5. When the conditions are set, the system starts calculating the route with the new conditions, and the current location map screen is displayed.

Available conditions: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

. [Fastest Route]:

Prioritizes by the fastest time.

. [Minimize Freeway]:

Minimizes the use of motorways.

. [Shortest Route]:

Prioritizes by the shortest route.

INFO:

Only one of these conditions can be utilized at a time.

Voice command

1. Push > located on the steering wheel switch.

2. After the tone sounds, speak a command.

To set conditions for the route calculation (Alternate command mode):

Fastest Route

Minimize Freeway Route

Shortest Route

Detailed route settings GUID-7B41871B-BE58-44A7-876F-12F47BD973AB

Detailed conditions can be set for the route calculation.

NRG0062

Basic operation: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

1. Push .

2. Highlight [Route Settings] and push .

3. Highlight [Other Routing Choices] and push .

4. Highlight the preferred condition and push . The indicator for the selected condition illuminates.

5. If [Route Settings] is exited after changing the settings, the system starts calculating the route with the new conditions.

Available setting items: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

. [Minimize Toll Roads]:

Minimizes the use of toll roads.

. [Use Time Restricted Roads]:

Uses any roads subject to time restrictions.

Black plate (109,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

. [Use Statistical Traffic Information]:

Uses statistical traffic information that is stored in the map data.

. [Use Real Time Traffic Information]:

Uses the latest traffic information received via the SiriusXM broadcast.

. [Use Avoid Area Settings]:

Enables the avoid area setting.

. [Use Ferries]:

Includes the use of ferries.

. [Use Learned Routes]:

Uses the roads that are most frequently traveled with the help of self-learning technology.

. [Auto Reroute]:

If the vehicle deviates from the suggested route, the system automatically recalculates a route that leads the vehicle to the suggested route.

INFO:

. The recalculated route may not be the shortest route because the system priori- tizes easy-to-drive roads for safety reasons.

. If route conditions are set from [Route Settings], all sections in the route are

subject to the same route conditions even though different route conditions are set for different sections in [Edit/Add to Route].

. If [Use Time Restricted Roads] is deacti- vated, the system calculates a route without any consideration of the regulations con- cerning the time or day of the week. There- fore, the suggested route may include a road subject to traffic regulations concerning the time or day of the week. When driving along the route, always follow all traffic regulations regardless of whether [Use Time Restricted Roads] is ON or OFF.

. If the system cannot calculate any alternative routes, it displays the previous route.

. If the vehicle overly deviates from the suggested route, the system calculates a new route.

. Statistical traffic information is based on previous traffic data. When the traffic situa- tion rapidly changes due to unexpected accidents, construction work, traffic restric- tions, emergencies, etc., the prediction accuracy of the system may be reduced.

. Traffic jam information displayed on the map screen is not statistical traffic information.

. When [Use Statistical Traffic Information] is turned on, the system may lead to a road where a traffic jam occurs or to a detour even though the shortest route does not have a traffic jam.

. Even when [Use Real Time Traffic Informa- tion] is turned on, if traffic information has not been provided for the area, sometimes it is possible that a detour will not be indicated in a location where a traffic jam occurs.

. The system may not lead to a detour if traffic closure or a traffic jam occurs far from the present location.

. The system calculates to reduce the time required for the entire route from the start to destination. If there are no appropriate routes, the system may lead to a route where a traffic jam occurs instead of leading to a detour.

. This system can learn and memorize the route that is most frequently used. However, despite driving on the same route several times so that the system can learn the route, the system may have difficulty learning the route under the following conditions:

[Use Time Restricted Roads] is turned on.

Route guidance 5-25

Black plate (110,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-26 Route guidance

[Use Real Time Traffic Information] is turned on.

GUID-26A16C76-0814-4B1C-A970-2AB23D51FD8A

Various guidance information can be set to be played during route guidance and activate or deactivate route and/or voice guidance.

BASIC OPERATION GUID-D19B4574-6214-40E4-9DA5-F9A754021E44

NRG0063

1. Push .

2. Highlight [Navigation] and push .

3. Highlight [Guidance Settings] and push .

4. Highlight the preferred item and push .

5. Push to return to the previous screen. Push to return to the current location map screen.

Available setting items GUID-33F68E2A-9D41-4F8A-84D2-96EAF18ADB19

NRG0082

. [Guidance Volume]:

Adjusts the volume level of voice guidance. Guidance settings (page 5-20)

. [Guidance Voice]:

Activates or deactivates voice guidance.

The indicator illuminates if voice guidance is activated.

Guidance settings (page 5-20)

. [Traffic Announcement]:

Provides an announcement of a traffic information event on the route.

Guidance settings (page 5-20)

. [Voice Guidance Settings]:

Sets advanced settings for the voice gui- dance announced at guide points.

Setting voice guidance at intersec- tions (page 5-27)

ROUTE GUIDANCE SETTINGS

Black plate (111,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

. [Guidance Display Settings]:

Activates or deactivates small turn arrow display on the map.

Displaying small turn arrow on map (page 5-28)

. [Estimated Time]:

Switches the display of estimated travel time to the destination or waypoint that is displayed on the map screen.

Switching estimated arrival time dis- play (page 5-28)

. [Others]:

[Set Average Speeds]: Set an average vehicle speed for each type of road, which is reflected in the calculation of the required time to the destination.

Set average speeds (page 5-29)

[Auto Reroute]: If the vehicle deviates from the sug- gested route, the system automatically recalculates a route.

Setting Auto Reroute (page 5-21)

SETTING VOICE GUIDANCE AT IN- TERSECTIONS

GUID-77FD38F3-D8EB-42AA-9F71-8BD92EA786D1

NRG0067

1. Push .

2. Highlight [Navigation] and push .

3. Highlight [Guidance Settings] and push .

4. Highlight [Voice Guidance Settings] and push .

NRG0083

5. Highlight [Intersection Guidance Settings] and push .

NRG0064

6. Highlight the preferred item and push .

Available setting items GUID-78F769A9-3918-4FD4-9CA4-51CAEE1848FD

. [Voice Announcements]:

Sets how many times the voice guidance is announced before the vehicle reaches an intersection.

1. Highlight [Voice Announcements] and push .

2. Highlight the preferred item and push .

. [Full]: The system announces three kinds of voice guidance: Turning Point, 1 Guide and 2 Guide.

. [Concise]: The system announces two kinds of voice guidance: Turning Point and 1 Guide.

Route guidance 5-27

Black plate (112,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-28 Route guidance

. [Turning Point]:

Turns on the sound that chimes when a maneuver is supposed to be occurring.

DISPLAYING SMALL TURN ARROW ON MAP

GUID-74F6E403-544C-47E4-B006-885C962EB70C

The guidance screen displayed when the vehicle passes through an intersection can be changed.

NRG0065

1. Push .

2. Highlight [Navigation] and push .

3. Highlight [Guidance Settings] and push .

4. Highlight [Guidance Display Settings] and push .

NRG0066

5. Highlight [Small Turn Arrow on Map] and push to activate or deactivate Small Turn Arrow on the Map (simplified turn indicator) displayed in the upper left corner of the map screen. The indicator illuminates if the Small Turn Arrow on the Map is displayed.

SWITCHING ESTIMATED ARRIVAL TIME DISPLAY

GUID-839BC8B6-5A50-4F16-8F24-5F678D28B3F7

The display of the travel time on the map screen can be switched between the travel time to the destination and the travel time to the waypoint.

NRG0068

Example: Switching the display to the travel time to the waypoint

1. Push .

2. Highlight [Navigation] and push .

3. Highlight [Guidance Settings] and push .

4. Highlight [Estimated Time] and push .

NRG0069

5. Highlight [Waypoint] and push .

The indicator for the selected condition illuminates.

Black plate (113,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6. Push to return to the current location map screen.

NRG0070

7. The icon displayed on the map screen is switched, and the travel time to the waypoint is displayed.

Displayed iconGUID-839BC8B6-5A50-4F16-8F24-5F678D28B3F7

: Display of the travel time to the destina- tion

: Display of the travel time to the waypoint

SET AVERAGE SPEEDS GUID-A604AE84-B9D7-4220-91CC-956A7A6B7E7D

The required time to the destination can be calculated based on the set vehicle speeds.

NRG0071

Basic operation GUID-86D1686C-84B5-4446-9B84-30EB283F7800

1. Push .

2. Highlight [Navigation] and push .

3. Highlight [Guidance Settings] and push .

4. Highlight [Others] and push .

5. Highlight [Set Average Speeds] and push .

6. Highlight the preferred item and push .

7. Use the multi-function controller to make an adjustment. The speed can be increased/ decreased by 5 MPH (5 km/h).

8. After finishing the setting, push or to activate the setting.

9. Push to return to the previous screen. Push to return to the current location map screen.

NRG0084

Available setting items: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

. [Auto]:

If set to ON, the system automatically calculates the required time to the destina- tion, the indicator illuminates and the speed settings cannot be changed.

. [Freeway]:

Adjust the average vehicle speed on a freeway by moving the multi-function con- troller in the direction of [+] or [-].

. [Main Road]:

Adjust the average vehicle speed on a main road by moving the multi-function controller in the direction of [+] or [-].

. [Town Road]:

Adjust the average vehicle speed on a town road by moving the multi-function controller in the direction of [+] or [-].

Route guidance 5-29

Black plate (114,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

5-30 Route guidance

. [Residential]:

Adjust the average vehicle speed in a residential area by moving the multi-function controller in the direction of [+] or [-].

. [Reset]:

Sets the average vehicle speeds to the default values.

Black plate (115,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6 Storing location/route

Storing location ............................................................................ 6-2

Storing location by searching .... ...................................... 6-2

Storing current vehicle location .... ................................... 6-3

Storing location by moving map ........................................ 6-4

Storing route ................................................................................. 6-5

Other settings .... .................................................................. 6-5

Storing tracked route .... ........................................................... 6-6

Other settings .... .................................................................. 6-6

Storing avoid area .... ................................................................. 6-7

Editing address book .... ........................................................... 6-8

Basic operation .... ................................................................ 6-8

Editing stored home and address .... ............................ 6-8

Minor adjustment of home or stored address .... ....... 6-9

Editing stored route .... ................................................... 6-14

Editing stored tracking .................................................... 6-14

Editing avoid area ............................................................. 6-15

Deleting stored item .... ......................................................... 6-18

Deleting stored item individually .................................... 6-18

Deleting individual item on the map .... ...................... 6-19

Deleting all stored items ................................................. 6-19

Transferring information to/from address book .... .......... 6-21

Black plate (116,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6-2 Storing location/route

GUID-FDA1633A-D752-4456-A9F9-E15E1D6A8CDA

Often visited locations can be stored in the Address Book. The stored addresses can be easily retrieved to set them as a destination or waypoint.

INFO:

. The Address Book can store up to 300 locations.

. New information placed in the same storage position will overwrite the old data.

STORING LOCATION BY SEARCHING GUID-C4411870-70A6-4CED-AEF6-4306140DBA4A

After a location is searched for once, it can be stored for future use.

1. Push .

NST0001

2. Highlight [Navigation] and push .

NST0002

3. Highlight [Address Book] and push .

NST0003

4. Highlight [Stored Location] and push .

NST0004

5. Highlight [Home Location (None)] or [Add New] and push .

NST0005

6. Highlight the appropriate method to search for a location and push .

4. Setting destination

NST0006

7. When a preferred location is displayed at the center of the map, confirm the address of the location and push .

A message is displayed, and the address of the location is stored in the Address Book.

STORING LOCATION

Black plate (117,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NST0007

8. Adjust the location of the stored item and edit the contents of the stored item as necessary. After finishing the setting, high- light [OK] and push .

INFO:

. When the location is stored in the Address Book, [Address Book] can be used to search for the location.

. A location can be adjusted by selecting [Move Location] using the same method as the one for a destination.

Moving location of destination (page 5-4)

Other settings GUID-2FF347F4-7E0D-4C2C-8420-1C15FBBDE693

An address can also be stored using the following procedure.

NST0008

1. Push .

2. Highlight [Address Book] and push .

3. Highlight [Store/Edit] and push .

4. Highlight [Add New] and push .

5. Highlight the appropriate method to search for a location and push . The address of the searched location is stored.

4. Setting destination

STORING CURRENT VEHICLE LOCA- TION

GUID-8FEECCF9-D683-4E8C-A794-FC91FDA9AC56

NST0009

1. Push to display the current loca- tion map screen.

2. Push at the current vehicle location.

NST0010

3. Highlight [Store Location] and push . A message is displayed, and the current vehicle location is stored in the Address Book.

Storing location/route 6-3

Black plate (118,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6-4 Storing location/route

NST0011

4. The icon representing the stored location is displayed on the map.

Push or to return to the current location map screen.

INFO:

The location is stored in the first available position number in the Address Book list.

STORING LOCATION BY MOVING MAP

GUID-4BCD622A-90A6-4990-A2DF-989A1FF2C076

NST0012

1. Move to the preferred location on the map and push .

NST0013

2. Highlight [Store Location] and push . A message is displayed, and the address of the location is stored in the Address Book.

NST0014

3. The icon representing the stored location is displayed on the map.

Push to return to the current location map screen.

INFO:

The address is stored in the first available position number in the Address Book list.

Black plate (119,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUID-1DFD7402-7654-48F4-B234-2E9EEB8FE22B

A maximum of 5 calculated routes can be stored.

Stored routes can be easily retrieved and set as the suggested route.

INFO:

Stored route includes only locations (destination and waypoints) and route calculation conditions, not the route itself.

1. Push .

NRG0043

2. Highlight [Route Info] and push .

NST0016

3. Highl ight [Store Route] and push .

NST0017

4. A confirmation message is displayed. Con- firm the contents of the message, highlight [Yes] and push .

The current route is stored.

OTHER SETTINGS GUID-5C4D6E4D-A09B-44DB-BC1A-E1D4EBE42338

A route can also be stored using the following procedure.

NST0018

1. Push .

2. Highlight [Navigation] and push .

3. Highlight [Address Book] and push .

4. Highlight [Stored Routes] and push .

5. Highlight [Store Current Route] and push .

6. A confirmation message is displayed. Con- firm the contents of the message, highlight [Yes] and push . The current route is stored.

INFO:

. The route is stored in the first available position number in the store current route list.

. A maximum of 5 routes can be stored. When 5 routes are stored in the Address Book, a new route cannot be stored until a route is deleted.

Deleting stored item (page 6-18)

. If any waypoints are not set on the route, the route cannot be stored.

Storing location/route 6-5

STORING ROUTE

Black plate (120,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6-6 Storing location/route

GUID-625152D0-E990-4F35-A7E4-70EAF29822EA

A travelled route up to the current location can be stored. A maximum of 5 tracked routes can be stored.

NST0086

1. Push to display the current loca- tion map screen.

2. Push at the current vehicle location.

NST0019

3. Highlight [Store Tracking] and push .

NST0020

4. A confirmation message is displayed.

Confirm the contents of the message, high- light [Yes] and push .

The tracked route you have traveled is stored.

5. Push or to return to the current location map screen.

INFO:

. A maximum of 5 tracked routes can be stored. When 5 tracked routes are stored in the Address Book, a new tracked route cannot be stored until a tracked route is deleted.

Deleting stored item (page 6-18)

. The tracked route is stored in the first available position number in the store tracking list.

OTHER SETTINGS GUID-D2E402F6-EF24-4DE3-9631-E4067A8B339C

A tracked route can also be stored using the following procedure.

NST0023

1. Push .

2. Highlight [Navigation] and push .

3. Highlight [Address Book] and push .

4. Highlight [Stored Tracking] and push .

5. Highlight [Add New] and push .

INFO:

A tracked route can only be stored using the setting screen when [Current Tracking] is set to on.

STORING TRACKED ROUTE

Black plate (121,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUID-293BCB0D-2D16-4B8F-BD4A-ED571A698FEB

An Avoid Area can be stored.

The Avoid Area is an area that can be excluded from a route, such as a road that is always congested. Once Avoid Areas are stored, the system avoids those areas when calculating a route. Up to 10 Avoid Areas can be stored.

1. Push .

NST0001

2. Highlight [Navigation] and push .

NST0002

3. Highlight [Address Book] and push .

NST0021

4. Highlight [Avoid Area] and push .

NST0022

5. Highlight [Add New] and push .

INFO:

A maximum of 10 Avoid Areas can be stored. When 10 Avoid Areas are already stored, a new Avoid Area cannot be stored until a currently stored Avoid Area is deleted.

Deleting stored item (page 6-18)

NST0087

6. Highlight the appropriate method to search for a location and push .

4. Setting destination

NST0024

7. Set the following items for the searched location.

Available setting items:

. [Rename]:

Changes the name. Rename (page 6-16)

. [Move Location]:

Adjusts the location of the Avoid Area. Move Location (page 6-16)

Storing location/route 6-7

STORING AVOID AREA

Black plate (122,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6-8 Storing location/route

. [Resize Area]:

Adjusts the range of the Avoid Area. Resize Area (page 6-16)

. [FWY]:

Avoids Freeways. FWY (page 6-17)

. [Delete]:

Deletes the avoid area. Delete (page 6-17)

8. After finishing the setting, highlight [OK] and push .

GUID-2F9B0811-F544-4F37-B2DA-3AF581679ADB

Items stored in the Address Book can be modified. These settings can be edited to make the navigation system more useful.

NST0025

BASIC OPERATION GUID-97187BF2-B3AE-4D4C-B401-15DD9E49AF73

1. Push .

2. Highlight [Navigation] and push .

3. Highlight [Address Book] and push .

4. Highlight the preferred item and push .

Available items GUID-815404A1-FEEB-41ED-A39B-674B510D5788

. [Stored Location]:

Edits the information of a stored home and Address.

Editing stored home and address (page 6-8)

. [Stored Routes]:

Edits the information of a stored route. Editing stored route (page 6-14)

. [Stored Tracking]:

Edits the information of a stored tracked route.

Editing stored tracking (page 6-14)

. [Avoid Area]:

Edits the information of a stored Avoid Area. Editing avoid area (page 6-15)

. [Delete Stored Items]:

Deletes a stored location or route. Delete stored items (page 8-10)

. [Transfer Address Book]:

Imports or exports the data of the stored items using a USB memory.

EDITING STORED HOME AND AD- DRESS

GUID-55B3E64C-040E-41C6-92AB-6A7FE497B952

NST0026

1. Highlight [Stored Location] and push .

EDITING ADDRESS BOOK

Black plate (123,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2. Highlight the stored home location or pre- ferred stored address and push .

INFO:

Highlighting [Sort] displays a list of various sort functions. To use the sort functions, stored locations must be set in advance.

Storing location (page 6-2)

NST0027

3. Highlight the preferred item and push .

Available setting items GUID-11E36B18-BAC8-4AB4-BA4D-8ED1FA243F45

. [Edit]:

Edits the stored address information.

. [Move Location]:

Adjusts the location of the stored address.

. [Delete]:

Deletes the stored address.

. [OK]:

Applies the settings.

Other settings GUID-A54EAF28-00A6-4213-912B-0409FFD86F4E

A stored address can also be edited using the following procedure.

NST0028

1. Push .

2. Highlight [Address Book] and push .

3. Highlight [Store/Edit] and push .

MINOR ADJUSTMENT OF HOME OR STORED ADDRESS

GUID-5C45809F-A832-42A0-AA2D-3DB62DB19A07

When [Edit] is selected, you can edit the following items of the home or stored location can be edited.

. [Show Icon on Map]

. [Name] (only for stored locations)

. [Voicetag] (only for stored location)

. [Icon]

. [Sound]

. [Direction]

. [Distance]

. [Phone No.]

. [Group] (only for stored locations)

. [Entry Numbers] (only for stored locations)

Show icon on map GUID-325FCB43-73E7-4D55-925F-D2B70883D061

Displays the home icon or the stored address icon on the map.

NST0029

1. Highlight [Edit] and push .

2. Highlight [Show Icon on Map] and push .

3. The indicator illuminates when the item is set. Then the system displays the icon on the map.

Storing location/route 6-9

Black plate (124,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6-10 Storing location/route

Name (only for stored locations) GUID-C66A986A-13A4-4BD6-BB58-9FB1FE1F9513

Changes the name of a stored location.

NST0030

1. Highlight [Edit] and push .

2. Highlight [Name] and push .

A character input screen is displayed.

NST0031

3. Enter the preferred name for the stored location.

How to input letters and numbers (page 2-15)

4. Highlight [OK] and push .

The name is stored.

Voicetag (only for stored locations) GUID-32FDDD5C-8F0A-48E2-AADD-80B77B24A1BB

Stores the voicetag for the stored location. The voicetag allows you to set the stored location as a destination using Voice Recognition.

NST0032

1. Highlight [Voicetag] and push .

NST0033

2. Highlight [Store] and push .

NST0034

3. A beep sounds, and the system enters the voice command reception mode.

4. Speak the name/word to be used as Voicetag.

5. The Voicetag is stored, provided the system recognizes it.

INFO:

. A Voicetag cannot be stored, overwritten or played while driving.

. The Address Book can store up to 100 Voicetags.

. Highlight [Play] to confirm the stored Voice- tag.

. Highlight [Delete] to delete a stored Voice- tag.

. If a Voicetag is already stored, select [Restore] to re-record the Voicetag.

Black plate (125,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Icon GUID-9C53779E-20C2-45E5-81DB-A16C2EC682C8

Changes the icon of the home or stored address to the preferred one. By changing the icons, the usage of the [By Icon] option of the sort function can be optimized more effectively ([Sort] menu situation).

NST0035

1. Highlight [Icon] and push .

A list of icons is displayed.

NST0036

2. Highlight the preferred icon and push .

3. The icon is changed.

Sound GUID-BE53DF6C-9019-4DFE-B381-AC5CA2B70344

Sets the tone of the alarm that sounds when the vehicle approaches the home or a stored address.

NST0037

1. Highlight [Sound] and push .

A sound list is displayed.

NST0038

2. Select the preferred alarm tone and push .

The indicator of the selected alarm tone illuminates.

Sound list: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

None

Chime

Melody

Sound

Dog

Cat

Wave

Church bell

Marimba

Trumpet

Horn

Scratch

Direction GUID-5A501A9A-9E70-4435-8747-3BF658892347

Sets the alarm to sound when approaching from a specific direction.

NST0039

Storing location/route 6-11

Black plate (126,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6-12 Storing location/route

1. Highlight [Direction] and push .

A map screen with the home or stored location located on the map center is displayed.

NST0040

2. Set the direction that sounds the alarm and push .

The selected direction is set.

INFO:

After the direction is set and [Direction] is selected and set again, a confirmation message is displayed. Confirm the contents of the message, highlight [Yes] and push . The set direction is overwritten.

Distance GUID-43E07CD2-1AAF-4C53-BDE1-25A07378207F

Sets the alarm to sound when reaching a specific distance to the home or stored address.

NST0041

1. Highlight [Distance] and push .

NST0042

2. Highlight the preferred distance option and push . The indicator of the selected distance illuminates.

Available distance options:

. 150 feet (50 m)

. 300 feet (100 m)

. 1000 feet (300 m)

. 1500 feet (500 m)

INFO:

Once the direction and the distance to sound an alarm are set, the system will sound the alarm when the vehicle enters the triggering zone.

Phone No. GUID-359D96A5-C421-45DE-BA3A-1F8660BDE4F8

Stores the telephone number of the home or a stored location.

NST0043

1. Highlight [Edit] and push .

2. Highlight [Phone No.] and push . The telephone number entry screen is displayed.

Black plate (127,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NST0044

3. Enter the telephone number of the home or stored location.

Number input screen (page 2-16)

4. Highlight [OK] and push .

The telephone number is stored.

INFO:

If the phone number of the home or a location is stored, the phone number can be used to search for the destination even if it is not included in the map data.

Group (only for stored locations) GUID-C26E66D3-AB03-4DD4-AC79-BB63F07F735F

This groups the stored locations.

By grouping the stored locations, the [By Group] option of the sort function can be used more effectively in the [Sort Entries] mode.

NST0045

1. Highlight [Group] and push .

NST0046

2. Highlight the preferred group and push .

When the indicator of the selected group illuminates, the stored location is classified into the applicable group.

Entry Number (only for stored locations) GUID-4D4334A7-A29D-407A-9FD4-9C6DBE70F813

Index the position numbers of any two stored locations in the list.

NST0047

1. Highlight [Entry Number] and push .

A list of stored locations is displayed.

NST0048

2. Highlight the stored addresses that you want to change and push .

The position numbers of the selected stored locations are changed.

Storing location/route 6-13

Black plate (128,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6-14 Storing location/route

EDITING STORED ROUTE GUID-B34B2346-A3F6-41DB-9332-FFAE48425ED2

NST0049

1. Highlight [Stored Routes] and push .

2. Highlight the preferred stored route and push .

NST0050

3. Highlight the preferred item to edit from the list on the right side of the screen and push .

4. After finishing the editing, highlight [OK] and push .

INFO:

If [Store Current Route] is selected, the system stores the current route.

Available setting items:

. [Rename]:

Changes the name. Character (letters and numbers) input screen (page 2-15)

. [Replace]:

Overwrites the stored route to the current route.

. [Delete]:

Deletes the stored route.

. [OK]:

Applies the settings.

EDITING STORED TRACKING GUID-D64EBAAA-6D03-4AE0-B569-4305B6CE04C4

NST0051

1. Highlight [Stored Tracking] and push .

2. Highlight a stored tracked route and push . When the ON indicator is not illuminated, push . The indicator illuminates, and the Edit screen is displayed.

If is pushed while the ON indicator is illuminated, the indicator turns off.

NST0052

3. Highlight the preferred item and push .

Available setting items (Current tracking):

. [View Track]:

Displays the tracked route up to the current location.

. [Delete]:

Deletes the stored current tracking.

. [OK]:

Applies the settings.

Black plate (129,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NST0053

Available setting items (Stored tracked routes):

. [View Track]:

Displays a stored tracked route on the map.

. [Rename]:

Changes the name. Character (letters and numbers) input screen (page 2-15)

. [Replace]:

Overwrites the stored tracked route to the current tracked route.

. [Delete]:

Deletes the stored tracked route.

. [OK]:

Applies the settings.

Displaying tracked route GUID-916EB5D5-466B-4B58-B2CC-ED956B301122

The stored tracked route can be displayed on the map as necessary.

NST0054

1. Highlight [Stored Tracking] and push .

2. Highlight a tracked route to display on the map screen, and push . The ON indicator illuminates, and the Edit screen is displayed.

NST0055

3. After confirming the location to display the tracked route, highlight [OK] and push . The screen returns to the

previous screen.

4. Push to return to the current location map screen.

INFO:

. Current tracking is displayed up to 6 miles (10 km).

. Stored tracking is displayed up to 12 miles (20 km).

EDITING AVOID AREA GUID-F38EB9D7-13DB-413E-975F-5006FDA93F0D

NST0057

1. Highlight [Avoid Area] and push .

2. Highlight the preferred Avoid Area and push .

Storing location/route 6-15

Black plate (130,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6-16 Storing location/route

NST0058

3. Highlight the preferred items and push .

Available setting items:

. [Rename]:

Changes the name.

. [Move Location]:

Adjusts the location of the Avoid Area.

. [Resize Area]:

Adjusts the range of the Avoid Area.

. [FWY]:

Avoids freeways.

. [Delete]:

Deletes the Avoid Area.

. [OK]:

Applies the setting.

4. After finishing the setting, highlight [OK] and push .

INFO:

An Avoid Area can be added by selecting [Add New].

Storing avoid area (page 6-7)

Rename GUID-BBC3489D-5F93-4084-B3AC-83503E99019B

Changes the name of an Avoid Area.

NST0059

1. Highlight [Rename] and push . A character input screen is displayed.

2. Enter the preferred name for the avoid area.

3. Highlight [OK] and push . The name is stored.

Move Location GUID-3DC5EA93-C1EA-4708-A010-369E4BCD26B5

Adjusts the location of the Avoid Area.

NST0060

1. Highlight [Move Location] and push .

2. Adjust the location of the Avoid Area.

3. After adjust ing the locat ion, push .

Resize Area GUID-36C7F49F-8A68-4201-8895-60971706BA2C

Adjusts the range of the Avoid Area.

NST0061

Black plate (131,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

1. Highl ight [Resize Area] and push .

2. Highlight the range from 5 available levels.

3. After highl ight ing the range, push .

INFO:

Push IN> or OUT> (if so equipped) to change the scale of the map.

FWY GUID-1C2BBE3A-3325-4BF5-8EC4-171BC3002F2C

Sets the route to avoid freeways.

NST0062

1. Highlight [FWY].

To include freeways in the Avoid Area, push to illuminate this indicator.

NST0063

2. The Avoid Area is displayed in green if it includes a freeway or in blue if it does not include a freeway.

INFO:

If the current vehicle location is set to an Avoid Area, the system will not provide route guidance.

Delete GUID-4F1EFC96-E76A-4440-A2AE-0EC24A210003

Deletes the Avoid Area.

NST0064

1. Highlight [Delete] and push .

NST0065

2. A confirmation message is displayed. Con- firm the contents of the message, highlight [Yes] and push . The stored item is deleted from the Address Book.

Storing location/route 6-17

Black plate (132,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6-18 Storing location/route

GUID-7748ECF4-5A66-4EB8-8926-7156EB7733C8

The locations and routes in the Address Book can be deleted. Two deletion methods are available: deleting an individual item and delet- ing all stored items.

NOTE:

Deleted items cannot be restored. Before deleting an item, always make sure that the item is truly not necessary.

DELETING STORED ITEM INDIVIDU- ALLY

GUID-3A140714-CD1D-4184-98F8-6B09EB625DF4

You can delete stored addresses, routes, track- ing and avoid areas individually.

NST0066

1. Push .

2. Highlight [Navigation] and push .

NST0067

3. Highlight [Address Book] and push .

NST0068

Example: [Stored Location] is highlighted.

4. Highlight the preferred item for deletion and push .

NST0069

5. Highlight the preferred location/route for deletion and push .

NST0070

6. Highlight [Delete] and push .

NST0071

DELETING STORED ITEM

Black plate (133,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

7. A confirmation message is displayed. Con- firm the contents of the message, highlight [Yes] and push . The stored item is deleted from the Address Book.

Other settings GUID-678ACBC4-A486-4E07-98A6-8FF264F7375A

A stored address can also be deleted using the following procedure.

NST0072

1. Push .

2. Highlight [Address Book] and push .

3. Highlight [Store/Edit] and push .

4. Highlight [Edit or Delete an Entry] and push .

5. Highlight a preferred address and push .

4. Setting destination

INFO:

This procedure applies only for deleting a stored home or address. A stored route, tracking or avoid area cannot be deleted using this proce- dure.

DELETING INDIVIDUAL ITEM ON THE MAP

GUID-7FC8E5B1-18DD-4CD4-B6BC-910029A4A400

1. Align the cross pointer over the preferred stored location for deletion by moving on the map. Then push .

NST0073

2. Highlight [Delete] and push .

NST0074

3. A confirmation message is displayed. Con- firm the contents of the message, highlight [Yes] and push .

The stored item is deleted from the Address Book.

DELETING ALL STORED ITEMS GUID-4BB3BE08-1BF4-4BD8-800D-D773232D2723

NST0075

1. Push .

2. Highlight [Navigation] and push .

NST0076

3. Highlight [Address Book] and push .

Storing location/route 6-19

Black plate (134,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6-20 Storing location/route

NST0077

4. Highlight [Delete Stored Items] and push .

NST0078

5. Highlight the preferred item for deletion and push .

Items that can be deleted

. [Delete Home Location]:

Deletes the home location.

. [Delete Address Book]:

Deletes all stored locations.

. [Delete Stored Routes]:

Deletes all stored routes.

. [Delete Current Tracking]:

Deletes the current tracked route.

. [Delete Stored Tracking]:

Deletes all stored tracked routes.

. [Delete Avoid Areas]:

Deletes all stored Avoid Areas.

. [Delete Stored Voicetags]:

Deletes all stored voicetags.

. [Delete Previous Destinations]:

Deletes all or one of the previous destinations.

. [Delete Previous Start Point]:

Deletes all previous start points.

. [Delete Learned Route]:

Deletes all system learned routes.

NST0079

6. A confirmation message is displayed. Con- firm the contents of the message, highlight [Yes] and push. The stored items are deleted from the Address Book.

Other settings GUID-CFE5F658-9C30-4941-B5C0-B3DCB2C0D60C

All stored addresses can also be deleted using the following procedure.

NST0080

1. Push .

2. Highlight [Address Book] and push .

Black plate (135,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3. Highlight [Store/Edit] and push .

4. Highlight [Delete All Addressbook Entries] and push .

4. Setting destination

INFO:

This procedure applies only for deleting a stored home or address. A stored route, tracking or avoid area cannot be deleted using this proce- dure.

GUID-27A3D90B-2833-4DFE-8F16-3060E08188A5

The information of the stored home and ad- dresses can be exported and imported using a USB memory.

NST0075

1. I nse r t a USB memory and push .

INFO:

Refer to the vehicle Owners Manual for the location of the USB connector.

2. Highlight [Navigation] and push .

NST0076

3. Highlight [Address Book] and push .

NST0081

4. Highlight [Transfer Address Book] and push .

NST0082

5. Highlight [Download Address Book to USB] or [Download Address Book from USB] and push .

Storing location/route 6-21

TRANSFERRING INFORMATION TO/ FROM ADDRESS BOOK

Black plate (136,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6-22 Storing location/route

NST0083

6. Highlight a stored item. The [ON] indicator illuminates.

NST0084

7. Highlight [Download] and push .

NOTE:

Do not remove the USB memory until the system completely imports or ex- ports the data.

NST0085

INFO:

If the USB memory already has the data for a stored address, a confirmation message is displayed. Once overwritten, the original data cannot be recovered.

Black plate (137,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

MEMO

Storing location/route 6-23

Black plate (138,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6-24 Storing location/route

MEMO

Black plate (139,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

7 Viewing technical information

Information screen ....................................................................... 7-2

Basic operation .... ................................................................ 7-2

Viewing information about current vehicle location ............. 7-3

Basic operation .... ................................................................ 7-3

Viewing available traffic information .... ................................. 7-3

Basic operation .... ................................................................ 7-4

Info on route .... ..................................................................... 7-4

Nearby traffic info. .... ........................................................... 7-5

Display urgent traffic information ....................................... 7-5

Traffic information on map ................................................... 7-6

Traffic information settings .... ............................................ 7-7

Viewing available weather information .... ............................ 7-8

Displaying weather information screen .......................... 7-9

Destination weather on suggested route screen ...... 7-15

Automatically display warnings/watches .... .............. 7-15

Map update .... ......................................................................... 7-17

Viewing navigation system unit identification .... ............. 7-18

Basic operation ................................................................. 7-18

Viewing navigation system version information ................ 7-18

Basic operation ................................................................. 7-18

Viewing GPS current location information ........................ 7-19

Basic operation ................................................................. 7-19

Black plate (140,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

7-2 Viewing technical information

GUID-4EDDA096-FC11-41F0-B857-178F3DC89E9A

This screen sets or displays various information that is helpful for using the vehicle safely and comfortably.

Available items include the vehicle information, Traffic Info. setup, current location information, GPS information, Voice recognition list and map version.

Designs and items displayed on the screen may vary depending on the markets and the models.

INFO:

A NavTraffic subscription is necessary to view Traffic Info.

BASIC OPERATION GUID-92A2336D-5526-4004-A06A-F3BC3265AF22

NIN0001

1. Push .

2. Highlight the preferred item and push .

Available items GUID-6E9C6094-026F-4DBC-BE1B-878A137D9ACD

. [Fuel Economy]:

Refer to the vehicle Owners Manual.

. [Tire Pressure] (if so equipped):

Refer to the vehicle Owners Manual.

. [Trip Computer] (if so equipped):

Refer to the vehicle Owners Manual.

. [Maintenance]:

Refer to the vehicle Owners Manual.

. [Where am I?]:

Displays information regarding the current vehicle location.

Viewing information about current vehicle location (page 7-3)

. [Traffic Info]:

Allows Traffic Info. setup. Viewing available traffic information (page 7-3)

. [Weather Info]:

Displays weather information. Viewing available weather informa- tion (page 7-8)

. [Others]:

[Map Update]: Display the map version and enable updating of the map data.

Map update (page 7-17)

[Navigation Version]: Displays the current navigation system version.

Viewing navigation system version information (page 7-18)

[GPS Position]: Displays GPS information regarding the current vehicle location.

Viewing GPS current location in- formation (page 7-19)

[Voice Recognition]: Displays the voice recognition list.

9. Voice recognition

INFO:

The displayed items vary depending on the options that are equipped on the vehicle.

INFORMATION SCREEN

Black plate (141,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUID-2E229568-4415-4B37-8F8E-E0BF9708690D

This displays the information about the vehicle location on the route when driving according to route guidance.

NIN0054

BASIC OPERATION GUID-4E861DCA-CBDA-4C56-BAD7-BD3911E7E0F3

1. Push .

2. Highlight [Where am I?] and push .

3. Push to return to the previous screen. Push to return to the current location map screen.

Contents of vehicle location information GUID-E27D6177-3395-4339-94EC-599515D15234

*1 Next Street:

Displays the next street on the route.

*2 Current Street:

Displays the current street on the route.

*3 Previous Street:

Displays the previous street on the route.

*4 Displays the distance to the next intersec- tion on the route.

*5 Displays the distance traveled from the previous intersection on the route.

GUID-C5346461-A5BD-4F83-8BDB-D84B2E92DD67

NavTraffic information is a subscription service offered by SiriusXM Satellite Radio.

This service provides real-time information regarding traffic flow, accidents, road construc- tion and other incidents, where available.

NavTraffic combines information from commer- cial and public traffic data providers including government departments of transportation, po- lice, emergency services, road sensors, cameras and aircraft reports. The traffic information is broadcast to the vehicle by the SiriusXM satellites. Available traffic information on the route the driver selected is shown on the navigation screen so traffic conditions between you and the destination are known. Three types of real-time traffic information for major road- ways are shown on the navigation system:

* Unscheduled traffic data for example, acci- dents and disabled vehicles.

* Scheduled traffic data, for example road construction and road closures.

* Traffic flow information (rate of speed data).

WARNING

NavTraffic information is not a substi- tute for attentive driving. Traffic condi- tions change constantly and emergency

Viewing technical information 7-3

VIEWING INFORMATION ABOUT CURRENT VEHICLE LOCATION

VIEWING AVAILABLE TRAFFIC INFORMATION

Black plate (142,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

7-4 Viewing technical information

situations can arise without warning. Relying only on NavTraffic information may lead to a collision and could result in serious personal injury.

NOTE:

Flow information is provided only for roads equipped with traffic sensors and is not available in all markets covered by the service. Flow data may not be available on portions of a road that is under construction. NavTraffic information is available in limited markets. To subscribe or to check if this service is available in the area:

call 1-866-635-2349 or see www.siriusxm. com/navtraffic

INFO:

If a contract is not completed for NavTraffic information service, a message appears, and it will not be possible to check the information on the traffic information system.

BASIC OPERATION GUID-9FCF114A-6464-4FB1-A4EB-592AFDF3522C

NIN0002

1. Push .

2. Highlight [Traffic Info] and push .

3. Highlight the preferred information and push .

4. Push to return to the previous screen.

Push to return to the current location map screen.

Available items GUID-B784ED0F-1609-435E-8648-E37DF9102640

. [Info on Route]:

Displays the list of traffic information found on the recommended route from the current vehicle location to the destination.

. [Nearby Traffic Info]:

Displays the list of traffic information around the current vehicle location.

INFO ON ROUTE GUID-2B171D5B-669A-4349-B25E-4FEF3E2DA636

This is only available when a route is set.

The list of traffic information found on the recommended route from the current vehicle location to the destination is displayed. The detailed information about displayed events can also be checked.

NIN0012

1. Highlight [Info. on Route] and push . A list screen is displayed.

NIN0013

2. Highlight the event to check the detailed information, and push .

Black plate (143,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NIN0014

3. The map screen centered around the selected event is displayed. On the left screen, the detailed information about the event is displayed.

The message can be scrolled using the multi-function controller or the steering wheel.

4. Push to return to the previous screen.

NEARBY TRAFFIC INFO. GUID-6CD2708A-F4E7-4D0D-8188-E427D52DEA05

The list of available traffic information around the current vehicle location is displayed.

NIN0003

1. Highlight [Nearby Traffic Info] and push . A list screen is displayed.

NIN0004

2. Highlight the event to check the detailed information for and push .

NIN0005

3. The map screen centered around the selected event is displayed. On the left screen, the detailed information about the event is displayed. The message can be scrolled using the multi-function controller or the steering wheel.

4. Push to return to the previous screen.

DISPLAY URGENT TRAFFIC INFOR- MATION

GUID-1EA8D920-109B-44F0-854E-B222FC440D20

When an urgent event is found around the current vehicle location, a message pops up automatically with a voice announcement.

NIN0036

The message includes the icon, event type, event information and the direct distance from the current location to the event.

Viewing technical information 7-5

Black plate (144,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

7-6 Viewing technical information

INFO:

. Urgent traffic information is displayed re- gardless of whether the traffic information system is on or off.

. When there are multiple urgent events, the event with the shortest direct distance from the current location is displayed.

. If the urgent event is on the recommended route, and if a detour is found, the detour route notification screen is displayed when the vehicle approaches the detour point.

TRAFFIC INFORMATION ON MAP GUID-68786295-E02D-4810-A0D9-15AB305F99C1

With subscription to NavTraffic service, traffic information is displayed on both Plan View and BirdviewTM map screen.

See NOTES ON NavTraffic INFORMATION for further information.

Notes on NavTraffic information (page 10-13)

Screen information GUID-9BEED240-4717-48E7-995F-203C8C48F817

NIN0006

*1 Road conditions Free Flow: Green arrow Moderate traffic: Yellow arrow Heavy traffic: Red arrow Section affected by serious traffic event: Purple dashed arrow

*2 Estimated travel time to destination calculated with consideration of traffic information on route.

*3 Traffic information icon: If the route is not already set, all of the traffic information icons on the map screen are displayed in color. When the route is already set, the icons on the route are displayed in color, and the icons outside the route are displayed in gray.

: Accident

: Closed road

Black plate (145,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

: Information

: Road work

: Slippery road

: Weather

: Incident

*4 Traffic indicator: Displays the reception condition of traffic information transmitted from the provi- der. Green: Reception condition is good. Gray: Reception condition is not good. No mark: Subscription to NavTraffic service is not detected.

Traffic information display and scale levels

GUID-B918E77A-07C7-4047-B349-ED8C636EAB44

2D map and Birdview Map

5 miles 10 km

2 miles 4 km

1 mile 2 km

1/2 mile 1 km

1/4 mile 500 m

1/8 mile 200 m

1/16 mile 100 m

1/32 mile 50 m

2D map and Birdview Map

1/64 mile 25 m

Checking detailed information for traffic information icons on the map

GUID-5416B9B3-3112-4538-85DE-DE6BFC9FDD6E

NIN0007

1. Place the cross pointer over the traffic information icon. The general description of the icon is displayed.

2. Push or touch [Detail]. The screen for showing the detailed information for the traffic information icon is displayed.

NIN0009

3. The map screen centered around the selected event is displayed. On the left screen, the detailed information about the event is displayed. You can scroll the message by using the multi-function con- troller or the steering wheel.

4. Push to return to the current location map screen.

TRAFFIC INFORMATION SETTINGS GUID-8D20AE05-3C79-4292-878D-64ABF082163E

This displays or changes the settings for the traffic information related functions.

NIN0037

1. Push .

2. Highlight [Navigation] and push .

3. Highlight [Traffic Info Settings] and push .

Viewing technical information 7-7

Black plate (146,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

7-8 Viewing technical information

NIN0038

4. Highlight the preferred setting and push . The indicator for the selected setting illuminates.

Available setting items GUID-E9A89D82-7302-444A-98E7-C7B1C949A3F7

. [Use Traffic Info]:

Enables all traffic information related func- tions.

. [Show Incidents on Map]:

Displays the traffic incidents (e.g., accident) on the map screen.

. [Show Traffic Flow on Map]:

Displays the traffic flow with an arrow on the map screen.

. [Blink Red Traffic Flow]:

Blinks the red traffic flow lines that represent congestions.

. [Traffic Announcement]:

Announces the traffic information event on

the route.

INFO:

. Even when [Show Traffic Flow on Map] and [Show Incidents on Map] are set to off, the list display of [Info on Route] and [Nearby Traffic Info] will not be affected.

. Even when [Traffic Announcement] is set to off, the route guidance will not be affected. Also, the announcement of emergency information and weather information will not be turned off.

Voice command

1. Push > located on the steering wheel switch.

2. After the tone sounds, speak a command.

To turn on or off the traffic information system:

Information Traffic Information (Standard mode)

Traffic Information (Alternate command mode)

GUID-8394F5A9-674B-4EA4-A4B7-41BDB9D1CE5F

NavWeatherXM information is a subscription service offered by SiriusXM Satellite Radio.

This service provides real-time information regarding current weather, temperature, warn- ings, road conditions and forecasts where available. The weather information is broadcast to the vehicle by the SiriusXM Satellite Radio.

The service enables you to view the following information on the navigation system.

. Current weather information icon of the destination on the screen of suggested route

. Detailed weather information and forecasts of an area of interest

. Countrywide and local maps with the current weather, temperature, warnings and road condition information

. List of warning/watches events detected around the current location

. Pop-up messages on the navigation screen with voice announcements when warnings and watches are detected around the current location

VIEWING AVAILABLE WEATHER INFORMATION

Black plate (147,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

WARNING

NavWeatherXM information is not a substitute for attentive driving. Weather conditions change constantly and emergency situations can arise without warning. Relying only on Nav- WeatherXM information could result in serious personal injury.

NavWeatherXM information is available in lim- ited markets. To subscribe to or check if this service is available in the area, call 1-866-635- 2349 or access www.siriusxm.com/navweather.

INFO:

. If a contract is not completed for the NavWeatherXM information service, a mes- sage appears and it will not be possible to check the information on the traffic informa- tion system.

. The weather information is available only for areas that provide weather information to NavWeatherXM.

NIN0015

INFO:

The reception condition of the NavWeatherXM information transmitted from the provider can be confirmed using the Weather indicator on the upper right side of the screen. Green: The reception condition is good. Gray: The reception condition is not good. No mark: A subscription to the NavWeatherXM service is not detected.

DISPLAYING WEATHER INFORMA- TION SCREEN

GUID-C5C12DF7-6237-4C83-8E21-0002E7963DE3

NIN0017

Basic Operation GUID-90EB4669-F835-4072-A319-32B22F1E62C7

1. Push .

2. Highl ight [Weather Info] and push .

3. Highlight the preferred information and push .

4. Push to return to the previous screen. Push to return to the current location map screen.

Available items: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

. Current Weather and Forecasts:

Displays current weather information and three-day forecasts.

. Warnings and Watches History:

Displays a list of warnings and watches recently detected around the current loca-

Viewing technical information 7-9

Black plate (148,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

7-10 Viewing technical information

tion.

. Weather Map:

Displays the current weather map for the preferred area.

. Temperature Map:

Displays the current temperature map for the preferred area.

. Warnings Map:

Displays the current watches/warnings map for the preferred area.

. Road Condition Map:

Displays the current road condition map for the preferred area.

Selecting city GUID-D6531FED-BFB5-416C-82D9-8B116FA6CB9D

When displaying various weather information screens by pushing , the range can be specified for the weather information from among the current location (local), destination, countrywide (nation) or a specified city.

The city can be specified by selecting one from the list that is displayed.

NIN0017

1. Push .

2. Highl ight [Weather Info] and push .

NIN0018

3. Highlight the preferred information and push .

NIN0055

4. Highlight [Select Other City from Menu] and push .

NIN0039

5. Highlight the preferred state from the list and push .

NIN0040

Black plate (149,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

6. Highlight the preferred city from the list and push .

INFO:

[Select Other City from Menu] is not available while driving.

Current weather and forecasts GUID-75D85473-E88D-4E22-9641-1D32544689E2

The current weather information and a three-day forecast for the current location, the destination or the preferred city.

NIN0018

1. Highlight [Current Weather and Forecasts] and push .

NIN0019

2. Highlight the preferred area and push .

INFO:

. [Weather Info on Destination] is not available unless a destination is set for the route guidance.

. When a destination is not set, nearby weather information is displayed.

NIN0020

3. A weather information screen is displayed. Highlight [Forecast] and push .

NIN0021

4. The forecast screen is displayed. A three- day forecast can be confirmed for the preferred area.

5. Push to return to the previous screen. Push to return to the current location map screen.

Voice command

1. Push > located on the steering wheel switch.

2. After the tone sounds, speak a command.

To display the list for weather information:

Weather Information (Alternate command mode)

Viewing technical information 7-11

Black plate (150,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

7-12 Viewing technical information

Warnings and watches history GUID-F682B323-18DA-46B7-A842-7C26701FE5ED

A list can be displayed for the warning/watch events detected around the current location. The detailed information of each event can also be displayed.

NIN0022

1. Highlight [Warnings and Watches History] and push . A list warning/watch events around the current location is dis- played.

NIN0023

2. Highlight the event to check the detailed information and push .

NIN0024

3. A screen with detailed information of the event is displayed.

4. Push to return to the previous screen. Push to return to the current location map screen.

Weather Map GUID-DDC7FB2D-2236-467B-B4B7-A794CC7D2A49

The current weather map can be confirmed for the current location, the destination, the entire country or the preferred city.

NIN0030

1. Highlight [Weather Map] and push .

NIN0031

2. Highlight the preferred map area push .

INFO:

[Destination Map] is not available unless a destination is set for the route guidance.

NIN0032

3. A weather map is displayed. The weather and precipitation level are shown by colors.

4. Push to return to the previous screen. Push to return to the current location map screen.

Black plate (151,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NIN0025

INFO:

Touch [Legend] to display the map legend.

Voice command

1. Push > located on the steering wheel switch.

2. After the tone sounds, speak a command.

To display the list for weather map:

Weather Map (Alternate command mode)

Temperature Map GUID-DDAC770F-FD6C-4519-AC56-907946018FFB

The current temperature map can be confirmed for the current location, the destination, the entire country or the preferred city.

NIN0041

1. Highlight [Temperature Map] and push .

NIN0042

2. Highlight the preferred map area and push .

INFO:

. [Destination Map] is not available unless a destination is set for the route gui- dance.

. When a destination is not set, a nearby weather map is displayed.

NIN0043

3. A temperature map is displayed. The tem- perature information is shown by numbers and colors.

4. Push to return to the previous screen. Push to return to the current location map screen.

NIN0044

INFO:

Touch [Legend] to display the map legend.

Viewing technical information 7-13

Black plate (152,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

7-14 Viewing technical information

Warnings Map GUID-CC1DFB39-50CE-4349-B7E3-77839AE5D868

The current warning/watch information can be confirmed for the current location, the destina- tion, the entire country or the preferred city.

NIN0045

1. Highlight [Warnings Map] and push .

NIN0046

2. Highlight the preferred map area and push .

INFO:

[Destination Map] is not available unless a destination is set for the route guidance.

NIN0047

3. A warning/watch map is displayed. Warning and watch information is shown by colors.

4. Push to return to the previous screen. Push to return to the current location map screen.

NIN0048

INFO:

Touch [Legend] to display the map legend.

Road Condition Map GUID-B622D0E8-1716-4D36-B69A-B9145C9CFD32

The current road condition can be confirmed for the current location, the destination, the entire country or the preferred city.

NIN0049

1. Highlight [Road Condition Map] and push .

NIN0050

2. Highlight the preferred map area and push .

Black plate (153,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

INFO:

[Destination Map] is not available unless a destination is set for the route guidance.

NIN0051

3. A road condition map is displayed. The road conditions are shown by colors.

4. Push to return to the previous screen. Push to return to the current location map screen.

NIN0052

INFO:

Touch [Legend] to display the map legend.

DESTINATION WEATHER ON SUG- GESTED ROUTE SCREEN

GUID-2A4A6B0C-0C62-472A-B58B-01D868FEDBD0

NIN0016

On the screen of the suggested route after setting a destination, the current weather information around the destination is displayed via icons.

Weather information iconsGUID-2A4A6B0C-0C62-472A-B58B-01D868FEDBD0

Clear Mostly Clear

Partly Cloudy

Mostly Cloudy

Cloudy

Haze

Fog

Rain, Light Rain

Hail Heavy Rain

Freezing Rain/Ice

Snow Heavy Snow

Dust/Sand Smoke/Ash

Thunderstorm

Tornado/Funnel Cloud

AUTOMATICALLY DISPLAY WARN- INGS/WATCHES

GUID-21A0C8E8-54B9-4322-9692-7076AE9C2FE8

When an urgent warning/watch is detected around the current vehicle location, a message pops up automatically with a voice announce- ment.

Viewing technical information 7-15

Black plate (154,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

7-16 Viewing technical information

NIN0033

The message includes the weather icon and text describing the event.

INFO:

. The pop-up messages and announcements can be set to on or off.

Weather information settings (page 7-16)

. If multiple warning/watch events are de- tected, they will be displayed in order starting with the one having the shortest linear distance from the vehicle.

Weather information settings GUID-4AF860D8-29F6-44C2-A69B-67744C8748BD

The settings can be confirmed and changed for the urgent weather information related functions.

NIN0053

1. Push .

2. Highlight [Navigation] and push .

3. Highlight [Weather Info Settings] and push .

4. Highlight the preferred setting and push . The indicator for the setting illuminates.

Available setting items:

. Display an Alert for Weather Warnings:

Displays a message screen automatically when the system detects urgent warning information.

. Display an Alert for Weather Watches:

Displays a message screen automatically when the system detects urgent watch information.

. Voice Announcements:

Provides urgent information announcements for warnings and watches around the

current location.

Types of warnings/watches GUID-D5907240-E2BF-4242-A4FF-F6EA93E6BF0C

Category Warnings/Watches

Tornado Tornado Watch, Tornado

Hurricane Inland Hurricane Wind, Hurri- cane Force Wind, Hurricane, Typhoon

Storm Severe Thunderstorm Watch, Severe Thunderstorm, Storm, Tropical Storm, Inland Tropical Storm, Dust Storm

Flood Flood Watch, Flash Flood, Coastal Flood, Lakeshore Flood, High Surf, Flood

Winter Winter Watch, Heavy Snow, Heavy Sleet, Lake Effect Snow, Freeze, Heavy Freezing Spray, Blizzard, Ice Storm, Winter Storm

Wind Wind Watch, High Wind, Wind Chill, Gale

Extremes Excessive Heat

Other Red Flag, Tsunami, Avalanche, Special Marine, Earthquake, Law Enforcement, Hazardous Materials, Nuclear Power Plant, Radiological Hazard, Civil Dan- ger, Fire, Shelter in Place, Volcano, Other Watches, Other Warnings

Black plate (155,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

INFO:

. The Other Watches category in the Other category includes Inland Hurricane Watch, Hurricane Watch, Typhoon Watch, Tropical Storm Watch, Inland Tropical Storm Watch and Fire Weather Watch.

. The Other Warnings category in the Other category includes Dense Fog Warn- ing, Freezing Fog Warning, Extreme Cold Warning, Frost Warning, Hydrologic Warn- ing, Ashfall Warning, Air Stagnation Warn- ing, Low Water Warning, Ice Accretion Warning, Dense Smoke Warning, Dense Smoke Advisory, Freezing Fog Advisory, Dense Fog Advisory, Ashfall Advisory and Air Stagnation Advisory.

GUID-82274F80-C030-482B-B018-23845E3B9E2C

New map data can be downloaded.

1. Push .

NIN0010

2. Highl ight [Map Update] and push .

3. To update the map data, insert the first of the map update DVDs.

NIN0011

4. Highl ight [DVD Update] and push .

INFO:

. Refer to the vehicle Owners Manual for the location of the DVD slot.

. Do not eject the DVD while updating the map data. Doing so will result in an incomplete update.

. Multiple DVDs are required to fully update the system. In addition, a Digital Rights Management (DRM) activation code is required to complete the installation. To purchase a map update and DRM code, please visit www.nissannavigation.com. You will need your Unit ID in order to purchase a map update.

Viewing navigation system unit identi- fication (page 7-18)

NOTE:

In handling the DVD-ROM, be careful on the following points. . Do not try to bend the DVD-ROM. Do

not use any disk that is bent or cracked.

. Do not use any benzine, thinner, or antistatic spray on them.

. Do not put on any sticker or write anything on either surface.

Viewing technical information 7-17

MAP UPDATE

Black plate (156,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

7-18 Viewing technical information

. If you need to clean it, do so with a soft cloth by wiping from the centre out- ward.

. Do not use a DVD Laser Lens Cleaners as they may cause the DVD player to malfunction.

GUID-AAB50C73-546F-49B0-96AC-C40ABA6A0150

The navigation system unit identification number and the current map version can be located.

NIN0011

BASIC OPERATION GUID-366CF82A-B200-440E-8FC0-55CC49358964

1. Push .

2. Highl ight [Map Update] and push .

3. The unit Identification (Unit ID) number is displayed.

4. Push to return to the previous screen. Push to return to the current location map screen.

Map update (page 7-17)

GUID-555F436F-5F83-4F9D-8EAA-67434A49AE9C

This displays the map version information.

NIN0034

BASIC OPERATION GUID-1463A3DA-36D1-4D56-AA70-C9D053C394B9

1. Push .

2. Highlight [Navigation Version] and push .

3. Push to return to the previous screen. Push to return to the current location map screen.

VIEWING NAVIGATION SYSTEM UNIT IDENTIFICATION

VIEWING NAVIGATION SYSTEM VERSION INFORMATION

Black plate (157,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUID-B1670433-8AF2-4A94-BAA8-F27CCA70834E

This displays GPS information, such as the positioning status, latitude/longitude, altitude and satellite locations.

NIN0035

BASIC OPERATION GUID-88761EB1-1B68-4E6E-B9E3-92424D72898B

1. Push .

2. Highlight [Others] and push .

3. Highlight [GPS Position] and push .

4. Push to return to the previous screen. Push to return to the current location map screen.

Contents of GPS information GUID-F62CCD4D-8F78-4AEE-B792-9503A5FF5C1C

*1 GPS Reception:

Displays the GPS positioning method.

3-dimension Calculating the latitude, longitude and altitude by four or more satellites.

2-dimension Calculating the latitude, longitude and altitude by three or more satellites.

Out of range Cannot calculate because no GPS satellites can be located.

*2 Latitude:

Displays the latitude.

*3 Longitude:

Displays the longitude.

*4 Approx Altitude:

Displays the approximate altitude.

*5 Positioning status:

(green) Satellites are available.

(gray) Satellites are being searched for.

Viewing technical information 7-19

VIEWING GPS CURRENT LOCATION INFORMATION

Black plate (158,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

7-20 Viewing technical information

MEMO

Black plate (159,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

8 Other settings

Settings screen ............................................................................ 8-2

Basic operation .... ................................................................ 8-2

Display settings ............................................................................ 8-3

Basic operation .... ................................................................ 8-3

Display adjustment .... .......................................................... 8-3

Basic operation .... ................................................................ 8-3

Setting color theme .... ........................................................ 8-5

Navigation setting ........................................................................ 8-6

Basic operation .... ................................................................ 8-6

Speed limit indication on map .... ..................................... 8-6

Other navigation settings .... ............................................ 8-7

Delete stored items .... ................................................... 8-10

Reset all navigation settings to default .... ................ 8-10

Volume adjustment .... ............................................................ 8-11

Basic operation ................................................................. 8-11

Clock settings ........................................................................... 8-12

Basic operation ................................................................. 8-12

Language and unit settings .... ............................................ 8-13

Language settings ............................................................ 8-13

Unit settings ....................................................................... 8-14

Black plate (160,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

8-2 Other settings

GUID-6C304C6D-8E4E-46F1-A8AC-ED4AC968621E

The navigation system can be customized to make it easier for you to use.

BASIC OPERATION GUID-99F3AE8C-0AFC-4B27-8A61-549AFD35A036

NSE0001

1. Push .

2. Highlight the preferred setting item and push .

Available setting items GUID-788F0E55-36DC-4D36-9419-8D162954A5FB

. [Navigation]:

Adjust various settings of the navigation system.

Navigation setting (page 8-6)

. [Audio]:

Refer to the vehicle Owners Manual.

. [Phone]:

Refer to the vehicle Owners Manual.

. [Bluetooth]:

Set Bluetooth Audio and Phone.

Refer to the vehicle Owners Manual.

. [Volume and Beeps]: Volume adjustment (page 8-11)

. [Rear Display] (if so equipped):

Refer to the vehicle Owners Manual.

. [Display]: Display settings (page 8-3)

. [Clock]: Clock settings (page 8-12)

. [Others]:

[Comfort]: This item is displayed when the ignition switch is in the ON position.

Refer to the vehicle Owners Manual.

[Language and Units]: Language and unit settings (page 8-13)

[Voice Recognition]: System feedback announcement modes (page 9-20)

[Camera] (if so equipped): Refer to the vehicle Owners Manual.

[Sonar] (if so equipped): Adjust the parking sensor detection sensitivity, etc.

Refer to the vehicle Owners Manual.

[Image Viewer]: Refer to the vehicle Owners Manual.

INFO:

The displayed items vary depending on the equipped options.

SETTINGS SCREEN

Black plate (161,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUID-7D273F21-ED6C-4E0D-B5A7-E4066024064C

This menu turns on and off the display, adjust the image quality of the navigation screen and change the color of the menu screen.

BASIC OPERATION GUID-74E5038C-FBE2-4D2A-B026-15A856464E92

NSE0002

1. Push .

2. Highlight [Display] and push .

3. Highlight the preferred adjustment item and push .

INFO:

If a rear display is equipped, it is possible to select [Display] after pushing , highlighting [Others] and then pushing .

Available setting items GUID-251BA01F-D040-494C-BB8A-F74573EBDA12

NSE0003

. [Display Adjustment]

Turn on and off the display and adjust the image quality of the navigation screen.

. [Color Theme]

Set the color of the menu screen.

DISPLAY ADJUSTMENT GUID-932CDCAF-6D9D-4E57-B5FB-9DBA74A7BE4B

This menu turns on and off the display and adjusts the image quality of the navigation screen.

BASIC OPERATION GUID-B3B17901-EBCD-4DB1-8046-0125EF1990FB

NSE0003

1. Highlight [Display Adjustment] and push .

2. Highlight the preferred adjustment item and push .

3. Use the multi-function controller to adjust to the preferred setting.

4. After setting, push or to apply the setting.

5. Highlight to return to the previous screen. Push to return to the current location map screen.

Other settings 8-3

DISPLAY SETTINGS

Black plate (162,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

8-4 Other settings

Available setting items GUID-25554EE3-E6D5-4576-A1E0-038E385BA752

NSE0004

. [Display]:

Turn on or off the screen. Display (page 8-4)

. [Brightness]:

Adjust the screen brightness. Brightness (page 8-4)

. [Contrast]:

Adjust the screen contrast. Contrast (page 8-4)

. [Background Color]:

Set the background color. Background color (page 8-5)

Display GUID-85CA5AD9-E89F-4A2D-AA87-37F055DCC19E

NSE0004

To turn off the display, push .

The display can also be turned off by pushing and holding OFF> for more than 2 seconds.

NSE0005

When any button is pushed with the display off, the display turns on. The display will automati- cally turn off when there is no switch operation for 5 seconds.

To turn on the display, push OFF>.

Brightness GUID-5493F077-4B2D-4A4A-AAED-8BA90D481C37

NSE0006

Adjust the display brightness by rotating the center dial in the [+] or [] direction on the multi- function controller.

Each time [+] or [] is pushed, the display brightness changes.

Contrast GUID-6AA7FAC8-FB18-476D-B72F-420D8C1922D3

NSE0007

Adjust the display contrast by rotating the center dial in the [+] or [] direction on the multi- function controller.

Each time [+] or [] is pushed, the display

Black plate (163,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

contrast changes.

Background color GUID-3DCFBB96-626B-4CC8-A20A-81D541C166A1

NSE0008

Select to toggle between the day screen and night screen.

NSE0039Day screen

NSE0040Night screen

INFO:

The background color setting can also be changed using OFF>.

SETTING COLOR THEME GUID-52DA0C1B-141F-46B8-976C-E635C187BDEE

NSE0010

1. Highl ight [Color Theme] and push .

NSE0011

2. Highlight the preferred menu color and push .

Other settings 8-5

Black plate (164,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

8-6 Other settings

GUID-CD28E280-A15F-4358-BAA8-4C4CCB888F54

The navigation system can be set in details to meet the preference.

BASIC OPERATION GUID-B1EABAAA-65E6-40BA-9A2F-AB5F91885622

NSE0012

1. Push .

2. Highlight [Navigation] and push .

3. Highlight the preferred setting item and push .

Available setting items GUID-11BEEC28-8C2C-43F7-B6E4-C357E9AE6F7B

. [Address Book]:

Store locations and routes, and edit the stored items.

Storing location (page 5-5)

. [Map View]:

Set the display method and the direction of the map.

Changing map view (page 3-11)

. [Map Icons]:

Set the map icons to display on the map.

Displaying map icons (page 3-17)

. [Guidance Settings]:

Set the various functions for the route guidance.

Guidance settings (page 5-20)

. [Route Settings]:

Change the routing preferences. Detailed route settings (page 5-24)

. [Traffic Info Settings]:

Set the various functions of the NavTraffic information system.

Traffic information settings (page 7-7)

. [Weather Info Setting]:

Set the functions of the NavWeatherXM information system.

Weather information settings (page 7-16)

. [Speed Limit Info]:

Display speed limit information. Speed limit indication on map (page 8-6)

. [Others]:

Display other setting items. Other navigation settings (page 8-7)

. [Delete Stored Information]:

Delete stored locations and the home setting in the Address Book.

Delete stored items (page 8-10)

. [Delete All Previous Destinations]:

Delete all previous destinations. Delete stored items (page 8-10)

. [Delete Previous Starting Point]:

Delete all previous starting points. Delete stored items (page 8-10)

. [Reset all Navigation Settings to Default]:

Reset all of the settings to default. Reset all navigation settings to de- fault (page 8-10)

SPEED LIMIT INDICATION ON MAP GUID-8E50C62E-0DF9-4845-8B88-5435189636CC

Turn the [Speed Limit Info] display on or off. The indicator light illuminates when the speed limit display function is set to on.

NSE0041

NAVIGATION SETTING

Black plate (165,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

1. Highlight [Speed Limit Info] and push .

NSE0013

2. Highlight [Speed Limit Indication on Map] to toggle the function between on and off. The indicator light illuminates when the speed limit display function is set to on.

OTHER NAVIGATION SETTINGS GUID-C46B02D0-84E9-4C49-AE03-A00EE82D0B1B

NSE0019

Basic Operation GUID-3BCDC9F0-704B-46C1-B5E7-AA2FC5437F75

1. Push .

2. Highlight [Navigation] and push .

3. Highlight [Others] and push .

4. Highlight the preferred setting item and push .

Available Setting Items GUID-4CA79003-96A1-4231-AEF2-3A9FA920C266

. [Audio Display on Map]:

Allows the audio information to be displayed at all times.

Displaying audio information on map screen (page 8-7)

. [Small Step Zoom by Dial]:

Sets the free zoom function on or off. When this setting is on, it is possible to adjust the scale in smaller steps than with normal scale adjustment.

. [Map Scrolling Information]:

Sets the system so that when the map scrolls the information about the location aligned at the center of the cross pointer is displayed.

Map scrolling information (page 3-18)

. [Customize Nearby Places]:

Set the category of frequently visited land- marks.

Customizing Nearby Places (page 8-8)

. [Keyboard Type]:

Switches the keyboard layout for the char- acter input screen.

Settings keyboard layout of character input screen (page 8-9)

. [North Up when Zoom Out]:

When this setting is ON, the orientation of the map is automatically changed to North Up when the widest map scale is selected. The orientation is changed to North Up even when Heading Up is set.

. [Adjust Current Location]:

Corrects the position of the current location. Adjusting current vehicle location (page 8-9)

Displaying audio information on map screen

GUID-B129D6D6-BD32-43B2-9EC1-5597D1F27CA6

The operating status of audio functions can be displayed on the map screen.

NSE0019

Other settings 8-7

Black plate (166,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

8-8 Other settings

1. Highlight [Others] and push .

2. Highlight [Audio Display on Map] and push . The indicator illuminates when the item is set.

3. Push to return to the current location map screen.

NSE0020

4. On the bottom of the map screen, the operating status of an audio/visual function is displayed at all times.

Customizing Nearby Places GUID-6964B37E-0550-4782-BAF7-FDE8E7BB6757

The modified list of places of interest can be used for searching for a location using [Places].

Searching for destination (page 2-20)

NSE0014

1. Highlight [Others] and push .

2. Highlight [Customize Nearby Places] and push .

NSE0015

3. Highlight the preferred item and push . The main category list is dis- played.

NSE0017

4. Highlight a main category and push . The sub category list is dis- played. Highlight [Category Search] and push . The preferred category can also be input directly.

NSE0018

5. Highlight a sub category and push . The category setting is mod- ified.

6. Push to return to the current location map screen.

Black plate (167,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Settings keyboard layout of character input screen

GUID-13AB4AEC-55B3-4A22-AB4F-9940A64DBE58

Depending on the users preference for the keyboard layout of character input screen, the ABC layout or QWERTY layout can be selected.

Example: Switching to the QWERTY layout

NSE0021

1. Highlight [Others] and push .

2. Highlight [Keyboard Type] and push .

NSE0022

3. Highlight [QWERTY] and push . The indicator illuminates when the item is

set.

4. Push to return to the current location map screen.

NSE0023ABC layout

NSE0024QWERTY layout

Adjusting current vehicle location GUID-BA287DE2-DD2E-4CE7-B8C2-A89C2D07A2EE

If the vehicle icon indicating the current vehicle location is not in the correct position, the location of the vehicle icon on the map screen can be adjusted.

INFO:

. Regardless of the map view setting, the map is displayed in Plan View when adjusting the position of the vehicle icon.

. When correcting the position of the vehicle icon, the map is automatically displayed in the North Up mode. After finishing the correction, the map restores the current orientation setting.

. The position and direction of the vehicle icon may be misaligned depending on the external conditions and environment.

. If the vehicle icon is misaligned, drive for a while in a location where the GPS signals can be received. This may correct the position of the vehicle icon.

NSE0025

1. Highlight [Others] and push .

Other settings 8-9

Black plate (168,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

8-10 Other settings

2. Highlight [Adjust Current Location] and push . The current location map screen is displayed.

NSE0026

3. Adjust the position of the vehicle icon.

After adjusting the position of the vehicle icon, push .

NSE0027

4. Adjust the direction of the vehicle icon.

After adjusting the direction of the vehicle icon, push .

NSE0028

5. A message is displayed, and the adjusted vehicle location is stored.

DELETE STORED ITEMS GUID-03FFF156-F2DB-4325-A9D3-66B68B30250E

Delete stored item from setting screen.

NSE0029

Basic operation GUID-D6453CB9-19C0-4C91-9852-8FC0829BBFC4

1. Highlight [Navigation] and push .

2. Highlight the preferred item that you want to delete and push .

Available items GUID-DFE1C332-90CA-4CE5-A709-3A1B4418EC3E

. [Deletes Stored Information]:

Delete the stored location and home.

. [Delete All Previous Destinations]:

Delete all previous destinations.

. [Delete Previous Start Point]:

Delete all previous start point.

RESET ALL NAVIGATION SETTINGS TO DEFAULT

GUID-66C649DE-B505-42B5-9043-D19851628E9A

This restores various settings (display, volume level, etc.) to the default settings.

INFO:

The memory contents, such as the stored locations, will not be deleted.

NSE0030

1. Highlight [Navigation] and push .

Black plate (169,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

2. Highlight [Reset All Navigation Settings to Default] and push .

NSE0031

3. A confirmation message is displayed. Con- firm the contents of the message, highlight [Yes] and push .

GUID-D00AB857-D296-4374-A005-8013A4B67B71

This turns on and off, as well as adjusts, the phone function (ringer, incoming and outgoing volume), the voice guide function and the beep function.

BASIC OPERATION GUID-7ED08D2C-19B2-4688-8D21-00F4BAB9AF8C

NSE0032

1. Push .

2. Highlight [Volume & Beeps] and push .

3. Highlight the preferred adjustment item and push .

4. Use the multi-function controller to adjust the volume. Push to set to on or off.

5. After setting, push or to apply the setting.

6. Push to return to the previous screen. Push to return to the current location map screen.

Setting items GUID-F14351CD-F8CF-43F8-9F9B-FD2C656973FA

. [Audio Volume]:

Adjust the volume level of the audio system by pushing the main directional buttons or rotating the center dial in the direction of [+] or [].

. [Guidance Volume]:

Adjust the volume level of voice guidance by pushing the main directional buttons or rotating the center dial in the direction of [+] or [].

. [Ringtone]:

Adjust the volume level of the ringtone by pushing the main directional buttons or rotating the center dial in the direction of [+] or [].

. [Incoming Call]:

Adjust the incoming call volume by pushing the main directional buttons or rotating the center dial in the direction of [+] or [].

. [Outgoing Call]:

Adjust the outgoing call volume by pushing the main directional buttons or rotating the center dial in the direction of [+] or [].

. [Switch Beeps]:

Select to toggle the beep function between on and off. The indicator light illuminates

Other settings 8-11

VOLUME ADJUSTMENT

Black plate (170,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

8-12 Other settings

when the beep function is set to on. The beep sounds when pushing and holding a button or when a prohibited operation is performed.

. [Guidance Voice]:

Select to toggle the voice guidance function between on and off. The indicator light illuminates when the voice guidance func- tion is set to on.

INFO:

For more details about [Ringtone], [Incoming Call] and [Outgoing Call], refer to the vehicle Owners Manual.

GUID-5B5C2F44-4992-4668-BF1B-EDBD2949FB2E

This changes the clock settings.

BASIC OPERATION GUID-13F08E0C-578A-43ED-97D6-DCBE5AB74C41

NSE0033

1. Push .

2. Highlight [Clock] and push .

3. Highlight the preferred adjustment item and push .

4. Use the multi-function controller to adjust to the preferred setting. Push to set on or off.

5. After setting, push or to apply the setting.

6. Push to return to the previous screen. Push to return to the current location map screen.

Setting items GUID-BEE93686-390C-4983-BF8B-6A84BEE885EA

. [On-screen Clock]:

Select to toggle the clock display located in the top right corner of the display between on and off. The indicator light illuminates

when the clock display is set to on.

. [Clock Format (24h)]:

Select the clock format between 12-hour and 24-hour times. The indicator light illuminates when the clock is set to the 24- hour format.

. [Offset (hour)]:

Use the main directional buttons or the center dial to adjust the offset value (between 12 and +12).

. [Offset (min)]:

Use the main directional buttons or the center dial to adjust the offset value (between 59 and +59).

. [Daylight Savings Time]:

Select to toggle the daylight savings time setting between on and off. The indicator light illuminates when the daylight savings time setting is set to on.

. [Time Zone]:

Select an appropriate time zone from the list that appears when this item is highlighted.

Pacific

Mountain

Central

CLOCK SETTINGS

Black plate (171,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Eastern

Atlantic

Newfoundland

Hawaii

Alaska

GUID-9DCFBDA7-ACB1-4677-99D5-458E0DA98E59

This changes the language and measurement unit used in the system.

LANGUAGE SETTINGS GUID-F2C416D6-B5D4-4E5D-A1F8-639231AF2F6D

NSE0034

1. Push .

2. Highlight [Others] and push .

3. Highlight [Language & Units] and push .

NSE0035

4. Highlight [Select Language] and push .

NSE0036

5. Highlight the preferred setting item and push . The indicator light of the selected item illuminates.

Available languages:

. [English]

. [Francais]

. [Espanol]

NOTE:

Do not change the ignition switch position while changing the language. Doing so may cause a system malfunction.

Other settings 8-13

LANGUAGE AND UNIT SETTINGS

Black plate (172,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

8-14 Other settings

UNIT SETTINGS GUID-2516D14A-D794-4F6C-9566-7B41267ACB36

NSE0034

1. Push .

2. Highlight [Others] and push .

3. Highlight [Language & Units] and push .

NSE0037

4. Highl ight [Select Units] and push .

NSE0038

5. Highlight the preferred unit and push . The indicator of the selected unit illuminates.

Available units:

. US:

mile, MPH, 8F, MPG

. Metric:

km, km/h, 8C, L/100 km

6. Push to return to the previous screen. Push to return to the current location map screen.

Black plate (173,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

MEMO

Other settings 8-15

Black plate (174,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

8-16 Other settings

MEMO

Black plate (175,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

9 Voice recognition

NISSAN voice recognition .... .................................................. 9-2

Standard mode .... ...................................................................... 9-3

Confirming how to use voice commands ........................ 9-3

Using the system .... ............................................................. 9-4

Before starting ........................................................................ 9-4

Giving voice commands .... ................................................ 9-5

Voice command examples ................................................... 9-8

Alternate command mode .... ................................................ 9-12

Displaying how to operate Voice Recognition System ........................................................... 9-12

Confirming how to use voice commands .... ............ 9-17

Using the system .............................................................. 9-19

Before starting .... ............................................................ 9-19

Giving voice commands .... ........................................... 9-19

System feedback announcement modes .... ............. 9-20

Setting alternate command mode ................................ 9-21

Speaker adaptation .......................................................... 9-21

Voice command examples .... ....................................... 9-23

Black plate (176,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

9-2 Voice recognition

GUID-17D4DE16-8733-494D-9B1C-E8BF4EEC3C18

NISSAN Voice Recognition allows hands-free operation of the navigation system and other systems equipped on this vehicle, in one of two modes, Standard Mode or Alternate Command Mode. Standard Mode allows the operation of Navigation, Phone, Audio, Information and Help.

The commands that are available are always shown on the display and announced by the system. To perform operations, simply follow the prompts given by the system. In Standard Mode, hands-free operation of Change map view, Route selection and Bluetooth Audio, etc. is not available through Voice Recognition.

Alternate Command Mode allows advanced operations. When this mode is active, an expanded list of commands can be spoken after pushing >, and the voice command menu prompts are turned off. Note that in this mode the recognition success rate may be affected because the number of available commands and ways of speaking each com- mand are increased. Otherwise, it is recom- mended that Alternate Command Mode be turned OFF and Standard Mode be used for the best recognition performance.

Alternate command mode (page 9-12)

INFO:

. To improve recognition success when Alter- nate Command Mode is active, try using the Speaker Adaptation function available in that mode.

Speaker adaptation (page 9-21)

Otherwise, it is recommended that Alternate Command Mode be turned OFF and Stan- dard Mode be used for the best recognition performance.

. For the voice commands for the audio, phone and other systems, refer to the vehicle Owners Manual. The following sec- tions refer only to the navigation, phone and information systems.

. The voice recognition system cannot be operated when the soft top is not closed (for Roadster and CrossCabriolet models).

NISSAN VOICE RECOGNITION

Black plate (177,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUID-1A7F9479-B441-4CC0-A44F-C5FB692BEF7A

CONFIRMING HOW TO USE VOICE COMMANDS

GUID-2592E3C0-BDF8-4551-9FAC-29594FB61C40

When operating the voice recognition system for the first time or if help is preferred to use the system, the User Guide can be displayed.

It is possible to confirm how to use voice commands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands.

NVR0001

Basic operation GUID-6488BAB7-0650-4B8A-87AE-FB7FA8588482

1. Push .

2. Highlight [Others] and push .

3. Highlight [Voice Recognition] and push .

4. H igh l ight [User Guide] and push .

5. Highlight the preferred item and push .

Available items: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

. [Getting Started]:

Describes the basics of how to operate the voice recognition system.

. [Lets Practice]:

Mode for practice following the system voice.

. [Using the Address Book]:

Tutorial for entering a destination by the Address Book.

. [Finding a Street Address]:

Tutorial for entering a destination by street address.

. [Placing Calls]:

Tutorial for making a phone call by voice command operation. Refer to the vehicle Owners Manual for details.

. [Help on Speaking]:

Displays useful tips regarding speaking for correct command recognition by the system.

INFO:

The Command List feature is only available when Alternate Command Mode is active.

Getting Started GUID-87426078-1A0F-4B63-9DFE-30E56773B915

Before using the voice recognition system for the first time, it is possible to confirm how to use commands by viewing the Getting Started section of the User Guide.

NVR0002

1. Highlight [Getting Started] and push .

2. To confirm the page, scroll the screen using the multi-function controller.

Practicing voice commands GUID-CDEFBC9E-A1CC-478F-A48F-9F01B52AD538

Practice for using the voice recognition function can be performed by repeating a phone number after the system announces it.

Voice recognition 9-3

STANDARD MODE

Black plate (178,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

9-4 Voice recognition

NVR0003

1. Highlight [Lets Practice] and push .

2. Practice voice commands in accordance with the audio guidance.

Tutorials on operation of voice recogni- tion system

GUID-B7CC887A-EB99-4A0B-8C6C-BD19444CEC9A

When highlighting [Using the Address Book], [Finding a Street Address] or [Placing Calls] and pushing , the system displays tutor- ials on how to perform these operations using voice recognition.

NVR0005

Useful tips for correct operation GUID-58A85E03-D1F9-4B77-B975-5A82D474CBB2

It is possible to display useful speaking informa- tion that may help the system to accept a voice command correctly.

NVR0004

1. Highlight [Help on Speaking] and push .

2. To confirm the page, scroll the screen using the multi-function controller.

USING THE SYSTEM GUID-539E8D5B-D33E-46A0-A939-82AE1E29FA3E

Initialization GUID-208AFEF9-6EB5-4D28-BBE9-0944D897E172

When the ignition switch is pushed to the ON position, Voice Recognition is initialized, which may take up to one minute. When completed, the system is ready to accept voice commands. If > is pushed before the initialization completes, the display will show the message: System not ready.

BEFORE STARTING GUID-48663A8B-A5B2-4BAC-A9AD-A83F8B2ADE4C

To get the best recognition performance from Voice Recognition, observe the following items.

. The interior of the vehicle should be as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noise and vibration sounds, etc.), which may prevent the system from correctly recognizing the voice commands.

. Wait until the tone sounds before speaking a command.

. Speak in a natural conversational voice without pausing between words.

. If the air conditioner is set to Auto, the fan speed is automatically lowered so that voice commands can be recognized more easily.

Black plate (179,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GIVING VOICE COMMANDS GUID-D46E52BA-684D-4DAB-B605-1A96C8D32A15

1. Push > located on the steering wheel switch.

NVR0006

2. A list of commands appears on the screen, and the system provides the voice menu prompt Would you like to access Phone, Navigation, Information, Audio or Help?.

3. After the tone sounds and the icon on the screen changes from [ ] to [ ], speak a command.

4. Continue to follow the voice menu prompts and speak after the tone sounds until the preferred operation is completed.

Operating tips GUID-4DC2C75C-9D70-45C4-B334-1290C6FC2DBB

. Speak a command after the tone.

. Commands that are available are always shown on the display and spoken through voice menu prompts. Commands other than those that are displayed are not accepted.

Follow the prompts given by the system.

. If the command is not accepted, the system announces, Please say again. Repeat the command in a clear voice.

. Push once to return to the previous screen.

. To cancel the command, push and hold >. The message, Voice can- celed will be announced.

. Push > to stop the voice prompt and give the command at once. Remember to wait for the tone before speaking.

. To adjust the volume of the system feed- back, push the volume control buttons <+> or <> on the steering wheel switch or use the audio system volume control knob while the system is making an announcement.

How to speak numbers GUID-01530F6C-D312-4B81-9BB4-B74F714C9EE7

NISSAN Voice Recognition requires a certain way to speak numbers when giving voice commands. Refer to the following examples.

General rule: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

Only single digits 0 (zero) to 9 can be used. (For example, if speaking 500, five zero zero can be used, but five hundred cannot.

Examples: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

1-800-662-6200

One eight zero zero six six two six two zero zero

Improving Recognition of Phone numbers:

Recognition of phone numbers can be improved by saying the phone number in 3 groups of numbers. For example, to call 800-662-6200, say Eight Zero Zero first, and the system will then ask to speak the next three digits. Then, say Six Six Two. After recognition, the system will then ask to speak the last 4 digits. Say, Six Two Zero Zero. Using this method of phone digit entry can improve recognition performance.

INFO:

For best recognition, speak zero for the number 0 and oh for the letter o.

Voice recognition 9-5

Black plate (180,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

9-6 Voice recognition

Command List GUID-50EA80A6-5D6D-4DD5-B5C1-2D09315AC7AB

Category Command: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

Command Action

Navigation Operates Navigation function.

Phone Operates Phone function.

Information Displays vehicle Information function.

Audio Operates Audio function.

Help Displays User Guide.

Navigation Command: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

Command Action

Destination Home Sets a route to the home that is stored in the Address Book.

Address Searches for a location by the street address specified, and sets a route (for continental U.S. only).

Places Sets a route to a facility near the current vehicle location.

Address Book Searches for stored information in the Address Book.

Previous Destinations Sets a route to a previous destination.

Information Command: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

Command Action

Fuel Economy Displays fuel economy information.

Trip Computer (if so equipped) Displays trip information.

Maintenance Displays maintenance information.

Traffic Information Displays the [Info On Route] screen when a route to the destination is set. Displays the [Nearby Traffic Info.] screen when a route to the destination is not set.

Where am I? Displays the current location.

Black plate (181,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Vehicle Phone Command: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

Command Action

Dial Number Makes a call to a spoken phone number up to 10 digits.

Vehicle Phonebook Makes a call to a contact that is stored in the Vehicle Phonebook.

Handset Phonebook Makes a call to a contact that is stored in the mobile phone.

Call history Incoming Calls Makes a call to the incoming call number.

Outgoing Calls Makes a call to the dialed number.

Missed Calls Makes a call to the Missed calls number.

International Call Makes an international call by allowing more than 10 digits to be spoken.

Audio Command: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

Command Action

AM Turns to the AM band, selecting the station last played.

FM Turns to the FM band, selecting the station last played.

XM Turns to the SiriusXM Satellite Radio band, selecting the channel last played.

CD Starts to play a CD.

General Commands: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

Command Action

Go back Corrects the last recognition result to return to the previous screen

Exit Cancels Voice Recognition

Voice recognition 9-7

Black plate (182,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

9-8 Voice recognition

INFO:

Refer to the vehicle Owners Manual for the operations related to phone, information and audio.

VOICE COMMAND EXAMPLES GUID-36141030-F0F1-4EAE-8988-C31ED0954808

To use the voice recognition function, speaking one command is sometimes sufficient, but at other times it is necessary to speak two or more commands. As examples, some additional basic operations that can be performed by voice commands are described here.

Example 1: Placing a call to the phone number 800-662-6200

GUID-4E079BFC-1E8F-4C3B-B34B-7541D294319A

1. Push > located on the steering wheel switch.

NGT0070

2. The system announces, Would you like to access Phone, Navigation, Information, Audio or Help?.

3. Speak Phone.

NGT0079

4. Speak Dial Number.

NGT0080

5. Speak 800.

NGT0081

6. The system announces, Please say next three digits or dial, or say change number. Speak 662.

NGT0082

7. The system announces, Please say last four digits or say change number. Speak 6200.

NGT0083

8. The system announces, Dial or Change Number?. Speak Dial.

Black plate (183,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NGT0084

9. The system makes a call to 800-662-6200.

INFO:

. Speaking 800-662-6200 (10 continuous digits) or 662-6200 (7 continuous digits) is acceptable, if the area code is not necessary. However the 3-3-4 digit group- ing is recommended for improved recogni- tion.

How to speak numbers (page 9-20)

. The NISSAN voice recognition system is not limited to recognizing phone numbers of only 7 or 10 digits. To dial a number in a format other than the 3-3-4 digit grouping, use the International Call command.

. If Change Number is spoken during phone number entry, the system will automatically request that the number be repeated using the 3-3-4 format. In this case please say the area code first and then follow the prompts.

. Do not add a 1 in front of the area code when speaking phone numbers.

. If the system does not recognize a voice command, please try repeating the com- mand using a natural voice. Speaking too slowly or too loudly may further decrease recognition performance.

Example 2: Placing an international call to the phone number 011-81-111-222- 3333

GUID-92DB0F19-658E-4721-832B-070BE6F8526A

1. Push > located on the steering wheel switch.

NGT0070

2. The system announces, Would you like to access Phone, Navigation, Information, Audio or Help?.

3. Speak Phone.

NGT0079

4. Speak International Call.

NGT0087

5. Speak 01181111222333.

NGT0088

Voice recognition 9-9

Black plate (184,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

9-10 Voice recognition

6. Speak Dial.

NGT0089

7. The system makes a call to 011-81-111- 222-3333.

INFO:

Any digit input format is available in the International Number input process.

Example 3: Setting a destination by a street address

GUID-2FCA3F04-E079-4E83-96FA-35A7661235A5

1. Push > located on the steering wheel switch.

NGT0070

2. The system announces, Would you like to access Phone, Navigation, Information, Audio or Help?.

3. Speak Navigation.

JNB0277X

4. Speak Address.

INFO:

Press or touch [Help] to display the user guide screen.

NGT0072

5. Speak the name of the state, California.

NGT0073

6. Speak the name of the city, Gardena.

NGT0093

7. Voice feedback will be provided when the command is accepted, and the list of city names is displayed.

8. After the tone sounds and the icon on the screen changes again, speak One.

Black plate (185,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NGT0074

9. Speak the name of the street, South Figueroa street.

INFO:

. Only the official street names stored in the map database can be recognized by the system. To improve accuracy, speak the street name precisely and include Boulevard, Way, North, South, etc., if known. If unsure of the full name, speak- ing only part of the street name such as Figueroa is acceptable, but recognition accuracy may be reduced.

. To correct the entered city, street or house number, speak Change City, Change Street or Change House Number.

NGT0075

10. Voice feedback will be provided when the command is accepted, and the list of street names appears.

11. After the tone sounds and the icon on the screen changes again, speak One.

NGT0076

12. Speak the house number. How to speak numbers (page 9-5)

INFO:

If the house number is unknown, speak No house number.

NGT0077

13. To confirm the destination location on the map, speak Show map. To calculate a route, speak Calculate route.

Voice recognition 9-11

Black plate (186,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

9-12 Voice recognition

GUID-398B0A21-C6A1-4482-B4C8-7CA96F02B671

The following section is applicable when Alter- nate Command Mode is active.

Setting alternate command mode (page 9-21)

When Alternate Command Mode is active, an expanded list of commands can be used after pushing >. In this mode, available commands are not fully shown on the display or prompted. Review the expanded command list, available when this mode is active. See exam- ples of Alternate Command Mode screens. Otherwise, it is recommended that Alternate Command Mode be turned OFF and Standard Mode be used for the best recognition perfor- mance.

Confirming voice commands (page 9-12)

DISPLAYING HOW TO OPERATE VOICE RECOGNITION SYSTEM

GUID-513B04F0-508D-47B9-8623-BD1BE50A7D33

When operating the voice recognition system for the first time or if help is preferred to use the system, the Command List (available only in Alternate Command Mode) or the User Guide are available.

NVR0018

Basic operation GUID-83F47021-2BC6-48C5-A9E5-A1A529F30AE3

1. Push .

2. Highlight [Others] and push .

3. Highlight [Voice Recognition] and push .

4. Highlight the preferred item and push .

Available items: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

. [Command List]:

A list of voice commands that the system can accept is displayed.

. [User Guide]:

A simplified operation manual of the voice recognition system can be displayed and how to use the voice commands can be confirmed.

INFO:

The Command List feature is only available when Alternate Command Mode is active.

Confirming voice commands GUID-3CD3732D-B528-4D44-807B-B29DFBA0787E

When controlling the system by voice com- mands for the first time or if an appropriate voice command is unknown, confirm using the voice command lists.

The following information describes how to display the navigation command list and the help list. For information about the operations of other functions, refer to the vehicle Owners Manual.

Example: Displaying the navigation com- mand list:

GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

1. Push .

2. Highlight [Others] and push .

3. Highlight [Voice Recognition] and push .

ALTERNATE COMMAND MODE

Black plate (187,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NVR0018

4. Highlight [Command List] and push .

NVR0019

5. Highlight the preferred item and push .

Available items:

. Phone Commands

. Navigation Commands

. Information Commands

. Audio Commands

. Help Commands

NVR0020

6. To confirm the list, scroll the screen using the multi-function controller.

7. Push to return to the previous screen.

Voice recognition 9-13

Black plate (188,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

9-14 Voice recognition

Command List GUID-D3321CD1-F219-460D-A884-999540F033C1

Navigation Command: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

INFO:

The words in italics are variable.

Command Action

Destination Home Sets a route to your home location.

Address Sets a route to the street address that you specify (for continental U.S. and Canda only).

Places Sets a route to a facility near the current vehicle location.

Address Book Sets a route to a location stored in the Address Book.

Previous Destinations Sets a route to a previously entered destination.

Previous Start Point Sets a route to the previous starting point.

Minimize Freeway Route Sets the route search condition to minimize the usage of freeways.

Fastest Route Sets the route search condition to find the fastest time.

Shortest Route Sets the route search condition to find the shortest distance.

Cancel Route Stops the current route but can be resumed by using .

Delete Destination Deletes the entire route (destination and waypoints).

Birdview Map Displays the map in BirdviewTM (3D).

Planview Map Displays the map in Plan View (2D).

North Up Locks the map to make North always point up.

Heading Up Locks the vehicle indicator to make it always point up.

Zoom In <1 to 13> Increases the magnification of the map by the number of steps specified.

Zoom Out <1 to 13> Decreases the magnification of the map by the number of steps specified.

Voice Guidance On/Off Turns the navigation guidance on and off.

Guidance Voice Repeat Speaks the current navigation guidance.

Black plate (189,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Information Command: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

Command Action

Fuel Economy Displays fuel economy information.

Tire pressure (if so equipped) Displays tire pressure information.

Trip Computer (if so equipped) Displays trip information.

Maintenance Displays maintenance information.

Where am I? Displays the current location.

Traffic Information Displays the [Info On Route] screen when a route to the destination is set. Displays the [Nearby Traffic Info.] screen when a route to the destination is not set.

Weather Information Displays weather information (for continental U.S. and Canada only).

Weather Map Displays the weather map (for continental U.S. and Canada only).

Vehicle Phone Command: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

Command Action

Dial Number Makes a call to a spoken phone number.

Vehicle Phonebook Makes a call to a contact that is stored in the Vehicle Phonebook.

Handset Phonebook Makes a call to a contact that is stored in the mobile phone.

Call History Incoming Calls Makes a call to the incoming call number.

Outgoing Calls Makes a call to the dialed number.

Missed Calls Makes a call to the Missed calls number.

International Call Makes an international call by allowing more than 10 digits to be spoken.

Call Makes a call to a contact that is stored in either Vehicle Phonebook or Handset Phonebook. Please say Call followed by a stored name.

Voice recognition 9-15

Black plate (190,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

9-16 Voice recognition

Audio Command: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

Command Action

CD Starts to play a CD.

FM Turns to the FM band, selecting the station last played.

AM Turns to the AM band, selecting the station last played.

XM Turns to the SiriusXM Satellite Radio band, selecting the channel last played.

USB Turns on the USB memory.

Bluetooth Audio Turns on the Bluetooth audio player.

AUX Turns on the AUX.

General Command: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

Command Action

Go back Corrects the last recognition result to return to the previous screen

Exit Cancels Voice Recognition

Help Command: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

Command Action

Command List Navigation Commands Displays the navigation command list.

Phone Commands Displays the phone command list.

Audio Commands Displays the audio command list.

Information Commands Displays the information command list.

Help Commands Displays the help command list.

User Guide Displays the User Guide

Speaker Adaptation The system memorizes the voices of up to three persons for better voice recognition performance.

Black plate (191,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

INFO:

Refer to the vehicle Owners Manual for the operations related to phone, information and audio.

CONFIRMING HOW TO USE VOICE COMMANDS

GUID-A146C84C-5D58-4FD0-9432-A7365ED06DA3

It is possible to confirm how to use voice commands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands.

NVR0021

Basic operation GUID-30C58600-F5BB-4048-AD59-59347ACF380C

1. Push .

2. Highlight [Others] and push .

3. Highlight [Voice Recognition] and push .

4. H igh l ight [User Guide] and push .

5. Highlight the preferred item and push .

Available items: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

. [Getting Started]:

Describes the basics of how to operate the voice recognition system.

. [Lets Practice]:

Mode for practice following the system voice.

. [Using the Address Book]:

Tutorial for setting a destination by the Address Book.

. [Finding a Street Address]:

Tutorial for entering a destination by street address.

. [Placing Calls]:

Tutorial for marking a phone call by voice command operation.

. [Help on Speaking]:

Displays the useful tips of speaking for correct command recognition by the system.

. [Voice Recognition Settings]:

Describes the available voice recognition settings.

. [Adapting the System to Your Voice]:

Tutorial adapting the system to the users voice.

Getting started GUID-19E32547-72C6-4F17-8B29-3E02C83FD143

Before using the voice recognition system for the first time, it is possible to confirm how to use commands by viewing the Getting Started section of the User Guide.

NVR0022

1. Highlight [Getting Started] and push .

2. To confirm the page, scroll the screen using the multi-function controller.

Practicing voice commands GUID-2502C11E-F99A-430D-A4AC-0B5B26ECAB91

Practice for using the voice recognition function can be performed by repeating a phrase after the system announces it.

Voice recognition 9-17

Black plate (192,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

9-18 Voice recognition

NVR0024

1. Highlight [Lets Practice] and push .

2. Practice voice commands in accordance with the audio guidance.

Tutorials on operation of voice recogni- tion system

GUID-BBD2A1BA-97BF-473E-8F13-48CEDE8C4D2E

When highlighting [Using the Address Book], [Finding a Street Address] or [Placing Calls] and pushing , the system displays tutor- ials on how to perform these operations using voice recognition.

Example: With [Using the Address Book] high- lighted

NVR0023

1. Highlight [Using the Address Book] and push . The tutorial starts.

NVR0025

2. The voice guide demonstrates how to speak when giving commands.

3. When the tutorial is completed, the system automatically switches to the Menu screen.

Useful tips for correct operation GUID-147D27A8-EA0F-48F7-9459-55D6B990C3E5

It is possible to display useful speaking tips that may help the system to accept a voice command correctly.

NVR0027

1. Highlight [Help on Speaking] and push .

2. To confirm the page, scroll the screen using the multi-functionI controller.

Voice recognition settings GUID-C7593FCE-14C4-4774-BF45-B952A4254808

The settings for easy operation of the voice recognition system are displayed.

NVR0028

Black plate (193,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

1. Highlight [Voice Recognition Settings] and push .

2. To confirm the page, scroll the screen using the multi-function controller.

Adapting System to Your Voice GUID-FFBEE2A4-8E2F-4A43-B43A-2BB065FF292E

The voice recognition system is equipped with a learning function to adapt to the users voice for better recognition. It is possible to confirm how to operate the learning function through this tutorial.

NVR0029

1. Highlight [Adapting the System to Your Voice] and push . The tutorial starts.

NVR0030

2. The voice guide demonstrates the steps that have to be performed.

3. When the tutorial is completed, the system automatically switches to the Menu screen.

USING THE SYSTEM GUID-5B497BF2-8C21-4BDA-AA46-C140CC39BF65

Initialization GUID-10C36848-7AE0-4EEC-A67A-D866FF588DFA

When the ignition switch is pushed to the ON position, Voice Recognition is initialized, which may take up to one minute. When completed, the system is ready to accept voice commands. If > is pushed before the initialization completes, the display will show the message: System not ready.

BEFORE STARTING GUID-5C9A995F-D105-4BBB-9BEA-EE1D3AB95C7A

To get the best recognition performance out of Voice Recognition, observe the following:

. The interior of the vehicle should be as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noise and

vibration sounds, etc.), which may prevent the system from correctly recognizing the voice commands.

. Wait until the tone sounds before speaking a command.

. Speak in a natural conversational voice without pausing between words.

. If the air conditioner is set to Auto, the fan speed is automatically lowered so that voice commands can be recognized more easily.

. The voice recognition system cannot be operated when the soft top is not closed (for Roadster and CrossCabriolet models).

GIVING VOICE COMMANDS GUID-309A48A9-66FB-4FD2-B415-649B94C0B3F4

1. Push > located on the steering wheel switch.

NVR0032

2. A list of commands appears on the screen, and the system announces, Please say a command.

Voice recognition 9-19

Black plate (194,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

9-20 Voice recognition

3. After the tone sounds and the icon on the screen changes from [ ] to [ ], speak a command.

Operating tips GUID-31F5BA7F-5D55-485A-834C-F33DAF430EAA

. If the command is not recognized, the system announces, Please say again.

Repeat the command in a clear voice.

. Push once to return to the previous screen.

. To cancel the command, push and hold >. The message, Voice can- celed will be announced.

. Push > to stop the voice prompt and give the command at once. Remember to wait for the tone before speaking.

. To adjust the volume of the system feed- back, push the volume control buttons [+] or [] on the steering wheel switch or use the audio system volume control knob while the system is making an announcement.

How to speak numbers GUID-8C5F06B9-97E1-4F59-A1B0-16B74F93E20D

NISSAN Voice Recognition requires a certain way to speak numbers when giving voice commands. Refer to the following examples.

General rule: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

Only single digits 0 (zero) to 9 can be used. For example, to say 500, five zero zero can be used, but five hundred cannot.

Examples: GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E

1-800-662-6200

One eight zero zero six six two six two zero zero

Improving Recognition of Phone numbers:

Recognition of phone numbers can be improved by saying the phone number in 3 groups of numbers. For example, to call 800-662-6200, speak Eight Zero Zero first, and the system will then ask to speak the next three digits. Then, say Six Six Two. After recognition, the system will then ask to speak the last 4 digits. Say, Six Two Zero Zero. Using this method of phone digit entry can improve recognition performance.

INFO:

For best recognition, speak zero for the number 0 and oh for the letter o.

SYSTEM FEEDBACK ANNOUNCE- MENT MODES

GUID-4A2B4FD5-7D3F-4AD9-B6B6-0C3C7664F69E

NVR0033

It is possible to select two modes, long or short, for the announcement by the system.

How to set GUID-1FFD0B5F-0D6B-446A-9DDC-2CF5489D8366

1. Push .

2. Highlight [Others] and push .

3. Highlight [Voice Recognition] and push .

NVR0034

Black plate (195,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

4. Highlight [Minimize Voice Feedback] and push . The indicator illuminates, and the system announcement mode switches to the short mode.

5. Push to return to the previous screen. Push to return to the current location map screen.

SETTING ALTERNATE COMMAND MODE

GUID-F0E4D5E1-1B23-482C-984A-67B71C7BF57C

This mode enables the operation of the display and audio through Voice Recognition. When this mode is active, an expanded list of commands can be spoken after pushing >, and the voice command menu prompts are turned off. Note that in this mode the recognition success rate may be affected because the number of available commands and ways of speaking each command are increased.

This mode can be turned on or off.

How to set GUID-96040F5A-387D-415A-833A-DCA93AF9E371

1. Push .

2. Highlight [Others] and push .

3. Highlight [Voice Recognition] and push .

NVR0035

4. Highlight [Alternate Command Mode] and push . A confirmation message is displayed. Highlight [Yes] and push . The indicator illuminates, and Alternate Command Mode switches to ON.

5. Push to return to the previous screen. Push to return to the current location map screen.

SPEAKER ADAPTATION GUID-D0F8E80D-D128-4B9A-9B9C-D72C985BBBFA

The voice recognition system has a function to learn the users voice for better voice recognition performance.

The system can memorize the voices of up to three persons.

Having the system learn the users voice GUID-62701166-60FA-4783-983B-5DF8A9B1E5CF

1. Push .

2. Highlight [Others] and push .

3. Highlight [Voice Recognition] and push .

NVR0036

4. Highlight [Speaker Adaptation] and push .

NVR0037

5. Highlight the user whose voice is memorized by the system, and push .

Voice recognition 9-21

Black plate (196,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

9-22 Voice recognition

NVR0038

6. Highlight [Start Speaker Adaptation Learn- ing] and push .

NVR0039

7. Highlight the voice command category to be learned by the system, and push . The voice command category list is dis- played.

NVR0040

8. Highlight the voice command to be learned by the system, and push . The voice recognition system starts.

NVR0041

9. The system announces, Please say a command.

10. After the tone sounds and the icon on the screen changes from [ ] to [ ], speak a command.

NVR0042

11. When the system has recognized the voice command, the voice of the user is learned. Push once to return to the previous screen.

INFO:

With [Continuous Learning] set to on, the system does not go back to the command list screen, allowing to continue voice command learning by the system.

12. If the system has learned the command correctly, None will change to Stored.

Editing registered items GUID-380E727C-72C7-4C18-B6AC-A176E9EB4BD8

It is possible to edit user names and select learning function settings.

1. Push .

2. Highlight [Others] and push .

Black plate (197,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

3. Highlight [Voice Recognition] and push .

NVR0036

4. Highlight [Speaker Adaptation] and push .

NVR0037

5. Highlight a user to edit, and push .

NVR0044

6. Highlight [Setting] and push .

NVR0045

7. Highlight an item to edit, and push .

Setting items

. [Edit User Name]:

Edit the user name.

. [Delete Voice Data]:

Reset the user voice that the voice recognition system has learned.

. [Continuous Learning]:

Have the system learn the voice com- mands of the user in succession, without selecting commands one by one.

VOICE COMMAND EXAMPLES GUID-9D05BF03-143B-4815-9BE8-4F9F591054EB

To use the voice recognition function, speaking one command is sometimes sufficient, but at other times it is necessary to speak two or more commands. As examples, some additional basic operations by voice commands are described here.

Example 1: Switching the map to 2D (Plan View) mode

GUID-0A511158-0238-4A62-B8E7-2E76EC470A94

NVR0046

1. Push > located on the steering wheel switch.

2. The system announces, Please say a command.

3. After the tone sounds and the icon on the screen changes from [ ] to [ ], speak

Voice recognition 9-23

Black plate (198,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

9-24 Voice recognition

Plan View Map.

NVR0047

4. Voice feedback will be provided when the command is accepted, and the map is displayed in 2D (Plan View).

Example 2: Setting a destination using places list

GUID-90CD4F21-5511-42E9-B2AD-34FB8FD05894

NVR0046

1. Push > located on the steering wheel switch.

2. The system announces, Please say a command.

3. After the tone sounds and the icon on the screen changes from [ ] to [ ], speak Places.

NVR0050

4. If a route is already set, choose Near Current Location, Along Route or Near Destination.

5. After the tone sounds and the icon on the screen changes again, speak Along Route.

NVR0043

6. Voice feedback will be provided when the command is accepted, and the list of places of interest categories appears.

7. After the tone sounds and the icon on the screen changes again, speak Two.

NVR0051

8. Voice feedback will be provided when the command is accepted, and the list of places of interest in the category specified in the previous step appears.

9. After the tone sounds and the icon on the screen changes again, speak One.

NVR0052

10. Voice feedback will be provided when the command is accepted, and the system starts calculating a route to the selected facility.

Black plate (199,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Example 3: Setting a destination by a street address

GUID-529B59D9-C16C-492C-9D37-2CB3E28E472D

NVR0006

1. Push > located on the steering wheel switch.

2. The system announces, Please say a command.

JNB0277X

3. Speak Address.

NVR0055

4. Speak the name of the state, California.

NVR0056

5. Speak the name of the city, Gardena.

NVR0057

6. Speak the name of the street, South Figueroa street.

INFO:

Speak the street name precisely including boulevard, way, north, south, etc. In Alter- nate Command Mode, the system does not recognize abbreviated names when they are spoken. In this case, the system does not accept Figueroa street or Figueroa.

NVR0058

7. Voice feedback will be provided when the command is accepted, and the list of street names appears.

8. After the tone sounds and the icon on the screen changes again, speak One.

Voice recognition 9-25

Black plate (200,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

9-26 Voice recognition

NVR0059

9. Speak the house number. How to speak numbers (page 9-20)

INFO:

If the house number is unknown, speak No house number.

NVR0060

10. To confirm the destination location on the map, speak Show map. To calculate a route, speak Calculate route.

Black plate (201,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

10 General system information

Features of this navigation system .... ................................ 10-2

Route guidance ................................................................... 10-2

Places of interest (PLACES) directory .... ................... 10-2

Address book .... ................................................................ 10-2

Avoid area .... ...................................................................... 10-2

NavTraffic information .... .................................................. 10-2

Automatic reroute .... ......................................................... 10-2

Detour .................................................................................... 10-2

BirdviewTM .... ...................................................................... 10-3

Voice guidance .................................................................... 10-3

Current vehicle location ........................................................... 10-3

Display of current vehicle location .... ........................... 10-3

What is GPS (Global Positioning System)? ................ 10-3

Incorrect display of vehicle position .... ........................ 10-5

Detailed Map Coverage Areas (MCA) for navigation system .... ......................................................... 10-7

When gray road is displayed on map ........................... 10-7

Route calculation .... ............................................................... 10-8

Route guidance ......................................................................... 10-9

Basics of voice guidance .... ......................................... 10-9

Directions provided and distances to guide points .... .............................................................. 10-10

Repeating voice guidance .... .................................... 10-11

Notes on voice guidance .... ...................................... 10-12

Notes on NavTraffic information ........................................ 10-13

Notes on NavWeatherXM information .... ...................... 10-14

Map data ................................................................................. 10-15

How to order map data updates ............................... 10-15

About map data .... ....................................................... 10-15

End-user terms .... ........................................................ 10-16

How to handle display ......................................................... 10-19

Characteristics of liquid crystal display .... ............. 10-19

Maintenance of display .... .......................................... 10-19

Black plate (202,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

10-2 General system information

GUID-98FEF3D2-CD1D-4BC0-8F09-2BDAADF1E615

ROUTE GUIDANCE GUID-60FC71DE-D525-4FFE-946B-1C8782019D21

The main features of the NISSAN Navigation System are visual guidance and voice guidance in selected map coverage areas. Utilizing a network of GPS (Global Positioning System) satellites, the NISSAN Navigation System tracks the location on the map and navigates to a preferred location.

Once the destination is set in a map coverage area, the NISSAN Navigation System will calculate a route from the current location to the destination. The real-time map display and turn-by-turn voice guidance leads the driver along the route. These features can be espe- cially helpful when driving to unfamiliar locations.

The system may be unable to set a destination and/or calculate a route when the destination is outside the map coverage area. Additionally, voice guidance may not be available if the destination is outside the map coverage area. For more information on how to set a destina- tion, refer to section 4.

PLACES OF INTEREST (PLACES) DI- RECTORY

GUID-3E6DF1AC-DB89-4295-B5FF-86BB271BA3EE

The NISSAN Navigation System offers an extensive places of interest (Places) directory in map coverage areas. This directory includes a wide variety of destinations ranging from gas stations, ATMs, and restaurants to casinos, ski

resorts, shopping centers and businesses. A point of interest can be searched by category, name or phone number. After selecting a destination, the NISSAN Navigation System will calculate a route to that destination.

The Places directory has many uses. For example, the directory can be sorted by the various types of restaurants near the current location. If an ATM or gas station is needed, the NISSAN Navigation System can navigate to the closest preferred location.

For more information on how to use the Places directory, refer to section 4.

ADDRESS BOOK GUID-44377770-A59B-47A4-9D5C-BC6DF93A9F08

The Address Book can store up to 300 locations from map coverage areas into a personal directory. This is especially useful for frequently visited locations, such as clients, relatives and friends. The Address Book function allows easy access to frequently visited locations when setting them as your destination.

For more information on how to use the Address Book, refer to section 6.

AVOID AREA GUID-F9142F15-5DAB-46E3-9B70-8E23856AE60D

The Avoid Area function sets areas or freeways that the NISSAN Navigation System does not include in the suggested route when calculating routes. For example, if a freeway or area that is

always congested with traffic.

For more information on the Avoid Area function, refer to section 6.

NavTraffic INFORMATION GUID-A99DB5DC-FEE0-4415-BCA2-FE497B0DF868

When available, the NavTraffic Information broadcast may help to avoid delays due to traffic incidents. Traffic jams, roadwork, closed roads around the current location, etc. are represented graphically on the map by icons depicting the nature of the event. Incidents on the route are automatically brought to the attention when they are approached.

The NavTraffic Information feature, via the guidance mode, may help to detour around traffic problems. For more information on the NavTraffic Information feature, refer to section 5.

AUTOMATIC REROUTE GUID-D7F879E1-A0AF-466F-B9BE-39961BC28BE9

When detecting a deviation from the suggested route, the NISSAN Navigation System will automatically recalculate a new route to the destination.

For more information on the Automatic reroute function, refer to section 5.

DETOUR GUID-F13F42A9-E267-442A-98C4-EB6F2539D4B5

To make a detour due to traffic conditions, the Detour function calculates an alternative route. The NISSAN Navigation System can calculate a

FEATURES OF THIS NAVIGATION SYSTEM

Black plate (203,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

route using secondary roads that will return to primary roads after a specified number of miles.

For more information on the Detour function, refer to section 5.

BirdviewTM GUID-8DDC5912-6B67-4631-8C1A-776DF46FB8D3

NGE0001

Two map types, the 2D (Plan View) map and BirdviewTM (3D) map, are available in the NISSAN Navigation System. BirdviewTM map displays the map from an elevated perspective. In BirdviewTM map, it is easy to recognize an image of the route because it provides a panoramic view over a long distance.

For more information on BirdviewTM map, refer to section 3.

VOICE GUIDANCE GUID-C384905E-8F9A-443E-A711-9628C5C49538

NGE0002

Route guidance is provided through voice and visual instructions. Voice guidance announces the appropriate directions when approaching an intersection to turn.

For more information on voice guidance, refer to section 5.

GUID-03C84863-4642-40E6-927E-938E75D29A0E

DISPLAY OF CURRENT VEHICLE LO- CATION

GUID-745FB371-9E5B-49BC-928B-E7B6175048F7

This navigation system combines the data obtained from the vehicle (by gyro sensor) and from GPS (Global Positioning System) satellites to calculate the current location of the vehicle. This position is then displayed throughout route guidance to a destination.

WHAT IS GPS (Global Positioning System)?

GUID-670C5732-A354-433C-9C45-F76ACA3F2460

GPS is a position detecting system that uses satellites deployed by the U.S. government. This navigation system receives radio signals from three or more different satellites that orbit 13,049 miles (21,000 km) above the earth in space, and detects the position of the vehicle by utilizing the principle of triangulation.

Positioning adjustment GUID-BD04A473-9C61-4AA8-BDD7-7197A4078961

When the system judges that the vehicle position information is not accurate based on vehicle speed and gyro sensor data calculations, the system will automatically adjust the position of the vehicle icon using GPS signals.

General system information 10-3

CURRENT VEHICLE LOCATION

Black plate (204,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

10-4 General system information

Receiving signals from GPS satellites GUID-5B802F5A-EC3B-402A-AA4E-73FFC76B29D5

The reception of GPS signals can be weak, depending on the environment. Vehicles in the following areas/environments may not receive GPS signals (indicator color: gray).

NAI0422

* Inside tunnels or parking garages

NAI0423

* Areas with numerous tall buildings

NAI0424

* Under multi-layered highways

NAI0425

* Under many large trees

NAI0713

* In a canyon

INFO:

The GPS antenna is located on the instrument panel inside the vehicle. Do not place any objects, especially mobile phones or transcei- vers, on the instrument panel. Because the strength of the GPS signal is approximately one billionth of that of TV waves, phones and transceivers will affect or may totally disrupt the signal.

Display of GPS information GUID-3C7BE64D-5298-4324-A1A8-2644A5B48283

GPS information can be displayed. Viewing GPS current location informa- tion (page 7-19)

Black plate (205,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

NOTE:

Route guidance provided by the navigation system does not take carpool lane driving into consideration, especially when car- pool lanes are separated from other road lanes.

INCORRECT DISPLAY OF VEHICLE POSITION

GUID-0E625C27-6611-4CE8-A676-BDEA21E9C018

The following cases may affect the display accuracy of the vehicles position or traveling direction. The accuracy will return to normal if the driving conditions return to normal.

NAI0426

* When there is a similar road nearby.

NAI0427

* When the vehicle is traveling in an area with a grid pattern road system.

NAI0428

* When the vehicle is passing through a large Y-shaped intersection/junction.

NAI0429

* When the vehicle is traveling on a contin- uous, slowly curving road.

NAI0430

* When the vehicle is traveling on a road with repeating S-shaped curves.

General system information 10-5

Black plate (206,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

10-6 General system information

NAI0431

* When the vehicle is on a loop bridge.

NAI0432

* When the vehicle is on a snow-covered or unpaved road.

NAI0433

* When repeatedly turning left or right, or driving in zigzags.

NAI0434

* When the vehicle is rotated on a parking lot turntable while the ignition switch is off.

NAI0435

* When driving on a road not displayed on the map screen or a road that has been changed due to additional construction or other reasons.

NAI0436

* When the GPS positioning accuracy is low.

Black plate (207,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

INFO:

. The vehicle icon may be misaligned when starting the vehicle just after starting the engine.

. The vehicle icon may also be misaligned if different sized tires or tire chains are installed.

. The system has a function that automatically corrects the vehicle icon position when it is misaligned from the actual position.

. Vehicle position correction by GPS may not function when the vehicle is stopped.

. If the vehicle icon position does not return to normal even after driving for a while, correct the vehicle icon position manually.

Adjusting current vehicle location (page 8-9)

DETAILED MAP COVERAGE AREAS (MCA) FOR NAVIGATION SYSTEM

GUID-693A3DA7-0FCB-4931-8E35-AEAE89247492

This system is designed to help guiding to the destination, and it also performs other functions as outlined in this manual. However, the system must be used safely and properly. Information concerning road conditions, traffic signs and the availability of services may not always be up-to- date. The system is not a substitute for safe, proper and legal driving. Map data covers select

metropolitan areas in the United States and Canada.

Map data includes two types of areas: Detailed coverage areas providing all detailed road data and other areas showing Main roads only.

NOTE:

Detailed map data is not available in many areas and is generally limited to select major metropolitan areas.

WHEN GRAY ROAD IS DISPLAYED ON MAP

GUID-8E6482AE-90DF-4F79-9799-5CD8BAB23357

. When you are driving on a road displayed in gray after the vehicle has deviated from the suggested route during route guidance, automatic rerouting may not start immedi- ately.

. The navigation system does not provide route guidance for roads displayed in dark green. Therefore, if the destination is set on a road displayed in dark green, the enlarged map display will return to the ordinary map screen at some point on a suggested route that is near the destination. Also, voice guidance will stop at some point on a suggested route that is near the destination.

. Places information and street names near roads displayed in gray may not be con-

tained in the map data.

General system information 10-7

Black plate (208,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

10-8 General system information

GUID-0CDE222A-4FDB-4C85-AFCB-93EC1CBAD056

. There may be cases that carpool lanes are included on a suggested route when the automatic rerouting function is activated, even if the Use Time Restricted Roads is turned off.

Setting conditions for route calcula- tion (page 5-23)

. The navigation system does not provide route guidance for roads displayed in dark green.

. If the destination is set on a dark green road, the enlarged map display will switch to the ordinary map screen at some point and suggest a route that is near the destination. The distance and direction to the endpoint of the suggested route will be displayed in the lower right corner of the screen. Also, at this time, voice guidance will announce, The route to the destination includes roads through incomplete map areas. Voice gui- dance will not be provided in these areas.

When approaching the endpoint of the suggested route, voice guidance will an- nounce, Entering the road with incomplete map data. Use the direction arrow and distance information to proceed to your destination.

To reach the destination, refer to the map screen. Always follow actual roads and

regulations and drive safely.

. The suggested route may not be the short- est, nor are other circumstances such as traffic jams considered.

. Because of the inevitable difference in road conditions and circumstances between the time you use this system and the time the information was produced for the map data, there may be discrepancies in roads and regulations. In such cases, follow the actual information available.

. During route calculation, the map will not scroll, however the vehicle icon will move with the actual vehicles movement.

. During route calculation, buttons such as , , OUT> and IN> (if so equipped) and the multi- function controller will be disabled.

. In some cases, after the calculation is complete, the calculated route may not be immediately displayed.

. Waypoints that have been passed will be disregarded by rerouting calculation.

. If you scroll the map while the suggested route is being drawn, it may take more time to finish drawing.

. If waypoints are set, the system calculates multiple routes between waypoints simulta- neously, and the following may result.

If one section between waypoints cannot be calculated, none of the route will be displayed.

The route may not connect completely at some waypoints.

The route may require a U-turn close to some waypoints.

. Route calculation may not be completed in the following cases.

If there is no main road within a range of 1.5 miles (2.5 km) from the vehicle, a message saying so will appear on the screen. Try recalculating when the vehi- cle is closer to a main road.

If there is no main road within a range of 1.5 miles (2.5 km) from the destination or waypoint, a message saying so will appear on the screen. Try setting the location closer to a main road.

If the vehicle is too close to the destina- tion or if there are no roads to the destination, a message saying so will appear on the screen.

ROUTE CALCULATION

Black plate (209,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

If it is impossible to reach the destination or waypoints because of traffic regula- tions, etc.

If the only route to reach the destination or waypoints is extremely complicated.

If the destination, current vehicle position or waypoint is within the Avoid Area.

If a part of the route is included in the Avoid Area.

. The following may occur when the route is displayed.

If you calculate a route on a main road, the starting point of the route may not exactly match the current vehicle loca- tion.

The endpoint of the route may not exactly match the destination.

If you calculate a route on a main road, the system may display a route from another main road. This may be because the position of the vehicle icon is not accurate. In this case, park the vehicle in a safe location and reset the vehicle icon, or continue driving to see if the position of the vehicle icon is automatically adjusted before recalculating the route.

There are cases in which the system shows an indirect route to reach the destination or waypoints, if you set them from stored or facility information. In order to correct this, you must be careful about the traffic direction, especially when lanes with different travel directions are shown separately, such as inter- changes and service areas.

This system makes no distinction be- tween limited traffic control and total control (blockage). It may show an indirect route even if the road is usable.

Even if the freeway preference is set to OFF, a route that uses the freeway may be suggested.

Even if the ferry preference is set to OFF, a route that uses a ferry line may be suggested.

Ferry lines, excluding those that are only for pedestrians, bicycles and motor- cycles, are stored in this system. Take into consideration the travel time required and operational condition before decid- ing whether to use them or not.

GUID-B4C10342-5DC2-430D-AE92-669C1AC8FF2E

INFO:

The system will only announce street names when the system language is set to English. Street names are not announced when the system is set to Francais (French).

BASICS OF VOICE GUIDANCE GUID-0BD0F305-1492-4E21-905F-AF5D806EF20A

Voice guidance announces which direction to turn when approaching an intersection in which a turn is necessary.

NOTE:

. There may be some cases in which voice guidance and actual road condi- tions do not correspond. This may occur because of discrepancies be- tween the actual road and the informa- tion on the map data, or it is due to the vehicles speed.

. In case voice guidance does not corre- spond to the actual road conditions, follow the information obtained from traffic signs or notices on the road.

. Route guidance provided by the navi- gation system does not take carpool lane driving into consideration, espe- cially when carpool lanes are separated from other road lanes.

General system information 10-9

ROUTE GUIDANCE

Black plate (210,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

10-10 General system information

DIRECTIONS PROVIDED AND DIS- TANCES TO GUIDE POINTS

GUID-25922332-6485-4384-9D3A-73AB288347E1

Directions will differ, depending on the road type.

INFO:

Distances may vary, depending on the vehicle speed.

Notification of intersection on ordinary roads

GUID-61F484DC-9A3B-4E3B-ABBD-6BE92AD6113E

INI0135

1. In about one quarter mile (400 meters), right (left) turn.

2. Right (left) turn ahead.

Notification of consecutive intersections on ordinary roads

GUID-76A81F54-9F2C-47C5-9B7E-7CE867B804CD

INI0136

When the road has three or more consecutive intersections ahead, voice guidance will an- nounce the following.

1. In about one quarter mile (400 meters), right (left) turn, then in about one quarter mile (400 meters) left (right) turn.

2. Left (right) turn ahead, then in about one quarter mile (400 meters) right (left) turn.

Notification of freeway entrance GUID-FA8217BA-EDED-4647-8197-F89B10B86FDD

INI0137

1. In about one quarter mile (400 meters) freeway entrance on your right onto (road number and direction).

2. Freeway entrance on your right onto (road number and direction).

Black plate (211,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Notification of freeway junction GUID-CCF2E050-C48E-4750-821F-42EEE7FBAE60

IGE0005

1. In about one mile (1.6 kilometers), keep to the right (left) onto (road number and direction), then in about one quarter mile (400 meters) keep to the right (left).

2. Keep to the right (left) onto (road number and direction), then in about one quarter mile (400 meters) keep to the right (left) onto (road number and direction).

3. Keep to the right (left) onto (road number and direction).

Notification of freeway exit GUID-92ED8AB0-AE4B-4C70-B9D3-77CCF3D73137

IGE0006

1. In about one mile (1.6 kilometers), exit on your right.

2. Take the second exit on your right.

Notification when approaching destina- tion

GUID-250B778C-B8B2-45B2-9A6E-660796A78703

Ordinary road:

When approaching the destination, voice gui- dance will announce, You have arrived at your destination. Ending route guidance. To finally reach your destination, refer to the map screen.

Dark green road:

After passing the last turning point on a suggested route, voice guidance will announce, The route to your destination includes roads through incomplete map areas. Voice guidance will not be provided in these areas. When approaching the endpoint of the suggested road, voice guidance will announce, Entering the road with incomplete map data. Please use the direction arrow and distance information to proceed to your destination.

REPEATING VOICE GUIDANCE GUID-E0CA97D1-E2F8-49EA-9AAC-AE40F59739BA

This function is available throughout route guidance, from the time after the route calcula- tion is completed until the vehicle arrives at the destination. Push . Voice guidance will be repeated.

General system information 10-11

Black plate (212,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

10-12 General system information

INFO:

. If is pushed when the vehicle is deviating from the suggested route and when the automatic reroute function is off, voice guidance will announce, Proceed to the highlighted route.

. If is pushed when the vehicle is going in the wrong direction, voice guidance will announce: Please make a legal U-turn if possible.

NOTES ON VOICE GUIDANCE GUID-FE73DEE6-EB1D-4B9B-8262-EC47AD0EEEA4

. Voice guidance in this system should be regarded as a supplementary function. When driving the vehicle, check the route on the map and follow the actual roads and traffic regulations.

. Voice guidance is activated only for inter- sections with certain conditions. There may be cases that the vehicle has to turn, but voice guidance is not provided.

. Voice guidance contents may vary, depend- ing on the direction of the turn and the type of intersection.

. The voice guidance timing will vary depend- ing on the situation.

. When the vehicle has deviated from the suggested route, voice guidance is not available. The system will not announce this. Refer to the map and recalculate the route.

Recalculating route (page 5-21)

. Voice guidance may not accurately corre- spond with road numbers and directions at freeway junctions.

. Voice guidance may not accurately corre- spond to street names at freeway exits.

. The displayed street names may sometimes differ from the actual names, or UN- KNOWN STREET NAME may be dis- played.

. Voice guidance is not available when the [Guidance Voice] is turned off.

Turning voice guidance ON/OFF (page 2-23)

. Voice guidance will start when the vehicle enters the suggested route. Refer to the map for directions to the starting point of the route.

. When approaching a waypoint, voice gui- dance will announce, You have arrived at waypoint 1 (2, 3, 4,...). Voice guidance will switch to the next section of the route. When voice guidance is not available, refer to the map for directions.

. In some cases, voice guidance ends before arrival at the destination. Refer to the destination icon on the map to reach the destination.

. If the system recognizes on which side the destination (waypoint) is located, voice guidance will announce on the right/left after announcing the arrival at the destina- tion.

. Voice guidance may be partially operational or inoperative due to the angle of roads at an intersection.

. Because freeway lane information is avail- able only for approximately 7,000 major freeways in North America, it is not possible to display information for all junctions and exits.

. Freeway exit information may differ from the information on the actual exit signs.

. Because it is not possible to consider data concerning roads that are seasonally avail- able or unavailable, a route may be displayed that does not match the actual traffic restrictions. Be sure to follow the actual traffic restrictions while driving.

. Canada and Alaska contain many roads with incomplete map data. As a result, when searching for a route, the route may include

Black plate (213,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

roads with incomplete data. In regions where road data is not complete, voice guidance may stop for long periods of time. Be sure to follow the actual traffic restric- tions while driving.

GUID-386C3136-3703-4D88-86B1-BED536B94B9F

. The NavTraffic information service is not provided for some cities. In addition, the cities for which the traffic information service is provided may be changed.

. In some cases, infrastructure problems may prevent the complete display of the traffic information. This is not a malfunction.

. Due to infrastructure problems, or due to the time when the traffic information service broadcast is received, the displayed infor- mation may differ from the actual traffic conditions.

. Depending on the traffic information, a detour route may be slower than the original route.

. NavTraffic is a service of SiriusXM Satellite Radio. NavTraffic is only available in select markets and is subject to data availability. Reception of the SiriusXM signal may vary depending on location. It requires a monthly premium subscription. The service provider is solely responsible for the quality and accuracy of the information provided. All fees and programming are subject to change. For more details on the NavTraffic service, terms and conditions, please visit

www.siriusxm.com/navtraffic.

You can also contact SiriusXM Satellite

Radio at

1-866-635-2349.

. As of January 31, 2009, the NavTraffic service covers 80 major metropolitan mar- kets. For the most current list of markets covered, please refer to

www.siriusxm.com/navtraffic, or call Sir- iusXM Satellite Radio customer support at 1-866-635-2349.

. Due to road maintenance, infrastructure problems (e.g. malfunction of road sensors, outage of central computer of infrastructure) or natural disasters, there are times when some or all traffic information may not be available.

. Incident information is based on human collection. Not all incidents that have hap- pened are collected and provided.

. Due to infrastructure problems, or transmis- sion delay, there are times when the information may differ from the actual con- dition. Always observe safe driving practices and follow all traffic regulations.

. Due to the coverage and quality of traffic information and road conditions, it is not always possible for the system to provide the shortest time route even when traffic information is considered.

General system information 10-13

NOTES ON NavTraffic INFORMATION

Black plate (214,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

10-14 General system information

. Traffic information that is displayed may differ from information from other media (e.g., radio), as other media may use different information sources.

GUID-B869FC04-0815-4B4C-93C5-BDE51EA619E2

. The NavWeatherXM information service is not provided for some cities. In addition, the cities for which the weather information service is provided may be changed.

. In some cases, infrastructure problems may prevent the complete display of the weather information. This is not a malfunction.

. Due to infrastructure problems, or due to the time when the weather information service broadcast is received, the displayed infor- mation may differ from the actual weather conditions.

. NavWeatherXM is a service of SiriusXM Satellite Radio. NavWeatherXM is only available in select markets and is subject to data availability. Reception of the Sir- iusXM signal may vary depending on loca- tion. It requires a monthly premium subscription. The service provider is solely responsible for the quality and accuracy of the information provided. All fees and programming are subject to change. For more details on the NavWeatherXM service, terms and conditions, please visit www. siriusxm.com/navweather. You can also con- tact SiriusXM Satellite Radio at 1-866-635- 2349.

. NavWeatherXM is designed to provide real- time weather and forecasting information in your general vicinity. Discrepancies may be encountered between the system and your actual location. Road system and weather changes may affect the accuracy of the information provided. Rely on your common sense to decide whether to follow a specified route. Detailed coverage is not available in every city or roadway.

NOTES ON NavWeatherXM INFORMATION

Black plate (215,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUID-F096B24D-DE68-4E5D-9F7C-A626CF1619C7

HOW TO ORDER MAP DATA UP- DATES

GUID-EF1A10DF-D2E0-41BE-9126-B94D90ECDB7B

To order updated map data, contact the NISSAN NAVIGATION SYSTEM HELPDESK. See the contact information on the inside front cover of this manual.

ABOUT MAP DATA GUID-3C0808E1-7193-4083-B487-1659577CD206

1. This map data has been prepared by HITACHI, LTD. under licence from ZENRIN CO., LTD. and NAVTEQ. ZENRIN CO., LTD. has added, processed and digitized data based on the digital road map data of Navigation Technologies Corporation. Due to the production timing of the map data, some new roads may not be included in this map data or some of the names or roads may be different from those at the time you use this map data.

2. Traffic control and regulation data used in this map data may be different from those at the time you use this map data due to the data production timing. When driving your vehicle, follow the actual traffic control signs and notices on the roads.

3. Reproducing or copying this map software is strictly prohibited by law.

Published by Nissan North America, Inc.

*C 2006 Navigation Technologies. All rights

reserved.

Certain business data provided by infoUSA, Inc., Omaha, NE, Copyright

*C 1993-2008 NAVTEQ. All Rights Reserved.

*C 2008, All Rights Reserved.

*C ZENRIN CO., LTD. 2009. All rights reserved.

*C ZENRIN USA, INC. 2008. All rights reserved.

*C 2008 Zagat Survey, LLC.

WARNING

. This navigation system should not be used to replace your own judge- ment. No itinerary suggested by this navigation system should ever over- ride any highway regulations, your own judgement, or a knowledge of safe driving practices. Do not follow the navigation systems suggested itinerary if it would cause you to perform a dangerous or illegal act, place you in a dangerous situation, or take you into an area you con- sider unsafe.

. The advice provided by the naviga- tion system is to be regarded as a suggestion only. There may be

times when the navigation system displays the vehicles location in- correctly, fails to suggest the short- est route, or fails to direct you to the your desired destination. In such instances, rely on your own driving judgement, taking into account the driving conditions at the time.

. Do not use the navigation system to locate emergency services. The da- tabase does not contain a complete listing of emergency services such as police stations, fire halls, hospi- tals and walk-in clinics. Please show discretion and ask for direc- tions in such instances.

. As the driver, you alone are respon- sible for your driving safety.

In order to avoid a traffic accident, do not operate the system while driving.

In order to avoid a traffic accident, operate the system only when the vehicle is stopped at a safe place and the parking brake is on.

In order to avoid a traffic accident or traffic offence, remember that actual road conditions and traffic General system information 10-15

MAP DATA

Black plate (216,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

10-16 General system information

regulations take precedence over the information contained on the navigation system.

The Software may contain inaccu- rate or incomplete information due to the passage of time, chan- ging circumstances, and the sources of information used. Please respect current traffic con- ditions and regulations at all times while driving.

Where actual road conditions and highway regulations differ from the information contained on the navigation system, abide by the highway regulations.

Keep the amount of time spent viewing the screen while driving to a strict minimum.

The navigation system does not provide, nor represent in any way information on: traffic and highway regulations; technical aspects of the vehicle including weight, height, width, load and speed limits; road conditions including grade, percentage of incline and surface conditions; obstacles such as the height and width of bridges

and tunnels; and other current driving or road conditions. Always rely on your own judgement when driving a car, taking into account current driving conditions.

The marks of companies displayed by this product to indicate business locations are the marks of their respective owners. The use of such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product.

END-USER TERMS GUID-5EF0C2C9-B7EA-405D-B626-3ACEF3B0E200

The data (Data) is provided for your personal, internal use only and not for resale. It is protected by copyright, and is subject to the following terms and conditions which are agreed to by you, on the one hand, and HITACHI (HITACHI) and its licensors (including their licensors and suppliers) on the other hand.

*C 2008 NAVTEQ. All rights reserved.

The Data for areas of Canada includes informa- tion taken with permission from Canadian authorities, including:*C Her Majesty the Queen in Right of Canada, *C Queens Printer for Ontario, *C Canada Post Corporation, Geo- Base.

NAVTEQ holds a non-exclusive license from the United States Postal Service to publish and sell ZIP+4 information.

*C United States Postal Service 2008. Prices are not established, controlled or approved by the United States Postal Service. The following trademarks and registrations are owned by the USPS: United States Postal Service, USPS, and ZIP+4.

The Data may include or reflect data of licensors, including Her Majesty the Queen in the Right of Canada (Her Majesty), Canada Post Corpora- tion (Canada Post) and the Department of Natural Resources Canada (NRCan). Such data is licensed on an as is basis. The licensors, including Her Majesty, Canada Post and NRCan, make no guarantees, representa- tions or warranties respecting such data, either express or implied, arising by law or otherwise, including but not limited to, effectiveness, completeness, accuracy or fitness for a parti- cular purpose.

The licensors, including Her Majesty, Canada Post and NRCan, shall not be liable in respect of any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action alleging any loss, injury or damages, direct or indirect, which may result from the use or possession of the data or the Data. The licensors, including Her Majesty, Canada Post and NRCan, shall not be liable in any way for loss of revenues or contracts, or any other consequential loss of any kind resulting from any

Black plate (217,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

defect in the data or the Data.

End User shall indemnify and save harmless the licensors, including Her Majesty, Canada Post and NRCan, and their officers, employees and agents from and against any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action, alleging loss, costs, expenses, damages or injuries (including injuries resulting in death) arising out of the use or possession of the data or the Data.

Terms and conditions GUID-DE1DA918-23CB-4CBE-9E7E-1DADE0E35000

Personal Use Only. You agree to use this Data together with Nissan Automotive Products for the solely personal, non-commercial purposes for which you were licensed, and not for service bureau, timesharing or other similar purposes. Accordingly, but subject to the restrictions set forth in the following paragraphs, you may copy this Data only as necessary for your personal use to (i) view it, and (ii) save it, provided that you do not remove any copyright notices that appear and do not modify the Data in any way. You agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse engineer any portion of this Data, and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws. Multi-disc sets may only be transferred or sold as a complete set as provided by HITACHI and not as a subset thereof.

Restrictions. Except where you have been specifically licensed to do so by HITACHI, and without limiting the preceding paragraph, you may not (a) use this Data with any products, systems, or applications installed or otherwise connected to or in communication with vehicles, capable of vehicle navigation, positioning, dis- patch, real time route guidance, fleet manage- ment or similar applications; or (b) with or in

communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including without limitation cellular phones, palmtop and handheld compu- ters, pagers, and personal digital assistants or PDAs.

Warning. The Data may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic data, any of which may lead to incorrect results.

No Warranty. This Data is provided to you as is, and you agree to use it at your own risk. HITACHI and its licensors (and their licensors and suppliers) make no guarantees, representa- tions or warranties of any kind, express or implied, arising by law or otherwise, including but not limited to, content, quality, accuracy, completeness, effectiveness, reliability, fitness for a particular purpose, usefulness, use or results to be obtained from this Data, or that the Data or server will be uninterrupted or error-free.

Disclaimer of Warranty: HITACHI AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY WARRAN- TIES, EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE, MERCHANTABILITY, FIT- NESS FOR A PARTICULAR PURPOSE OR

General system information 10-17

Black plate (218,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

10-18 General system information

NONINFRINGEMENT. Some States, Territories and Countries do not allow certain warranty exclusions, so to that extent the above exclusion may not apply to you.

Disclaimer of Liability: HITACHI AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, WHICH MAY RESULT FROM THE USE OR POSSES- SION OF THE INFORMATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CON- SEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE INFOR- MATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF HITACHI OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some States, Territories and Countries do not allow certain liability exclusions or damages limita- tions, so to that extent the above may not apply to you.

Export Control. You agree not to export from anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations.

Entire Agreement. These terms and conditions constitute the entire agreement between HITACHI (and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agree- ments previously existing between us with respect to such subject matter.

Governing Law. The above terms and conditions shall be governed by the laws of the State of Illinois, without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction of the State of Illinois for any and all disputes, claims and actions arising from or in connection with the Data provided to you hereunder.

Government End Users. If the Data is being acquired by or on behalf of the United States government or any other entity seeking or applying rights similar to those customarily claimed by the United States government,

NAVTEQ Data (hereinafter Data) is a com- mercial item as that term is defined at 48 C.F.R. (FAR) 2.101, is licensed in accordance with ENDUSER TERMS, and each copy of the Data delivered or otherwise furnished shall be marked and embedded as appropriate with the following Notice of Use, and shall be treated in accordance with such Notice:

NOTICE OF USE CONTRACTOR (MANUFACTURER/SUPPLIER)

NAME: NAVTEQ CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS: 425 West Randolph St., Chicago,

Illinois 60606 This Data is a commercial item as defined in FAR 2.101 and is subject to END-USER TERMS

under which this Data was provided. *C 2008 NAVTEQ All rights reserved.

If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal government agency, or any federal official must notify NAVTEQ prior to seeking additional or alternative rights in the Data.

Black plate (219,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUID-75546184-D91E-4825-92D2-74D55422C22D

The display is a liquid crystal display and should be handled with care.

WARNING

Never disassemble the display. Some parts utilize extremely high voltage. Touching them may result in serious personal injury.

CHARACTERISTICS OF LIQUID CRYSTAL DISPLAY

GUID-38D1F7B2-9332-4CB2-A144-7B99EE5002B9

. If the temperature inside the vehicle is especially low, the display will stay relatively dim or the movement of the images may be slow. These conditions are normal. The display will function normally when the interior of the vehicle has warmed up.

. Some pixels in the display are darker or brighter than others. This condition is an inherent characteristic of liquid crystal dis- plays, and it is not a malfunction.

. A remnant of the previous display image may remain on the screen. This screen burn is inherent in displays, and it is not a malfunc- tion.

INFO:

The screen may become distorted by strong magnetic fields.

MAINTENANCE OF DISPLAY GUID-C7A10DB7-C7F5-4272-85DA-5CE140384831

CAUTION

. To clean the display, never use a rough cloth, alcohol, benzine, thin- ner and any kind of solvent or paper towel with a chemical cleaning agent. They will scratch or deterio- rate the panel.

. Do not splash any liquid such as water or car fragrance on the dis- play. Contact with liquid will cause the system to malfunction.

To clean the display screen, use a dry, soft cloth. If additional cleaning is necessary, use a small amount of neutral detergent with a soft cloth. Never spray the screen with water or detergent. Dampen the cloth first, then wipe the screen.

General system information 10-19

HOW TO HANDLE DISPLAY

Black plate (220,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

10-20 General system information

MEMO

Black plate (221,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

11 Troubleshooting guide

Customer assistance ................................................................ 11-2

Basic operations ....................................................................... 11-3

Vehicle icon ................................................................................ 11-4

Route calculation and visual guidance .... ......................... 11-6

Voice guidance ......................................................................... 11-8

Voice recognition .... ............................................................... 11-9

Traffic information .... ........................................................... 11-10

Black plate (222,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

11-2 Troubleshooting guide

GUID-B40C8288-548D-42E2-95B7-E3394E12BA8E

For assistance or inquiries about the NISSAN Navigation System, contact the NISSAN NAVI- GATION SYSTEM HELPDESK. See the contact information on the inside front cover of this manual.

CUSTOMER ASSISTANCE

Black plate (223,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUID-1D3FAC03-7CBA-47B6-986C-E27256D02FE4

Symptom Possible cause Possible solution

No image is displayed. The brightness is at the lowest setting. Adjust the brightness of the display.

The system in the video mode. Push appropriate button (depending on models) on the control panel to change the mode. Refer to the vehicle Owners Manual.

The display is turned off. Push OFF> to turn on the display.

No voice guidance is available. or The volume is too high or too low.

The volume is not set correctly, or it is turned off. Adjust the volume of voice guidance.

Voice guidance is not provided for certain streets (roads displayed in gray).

This is not a malfunction.

No map is displayed on the screen. A screen other than map screen is displayed. Push .

The screen is too dim. The movement is slow.

The temperature in the interior of the vehicle is low. Wait until the interior of the vehicle has warmed up.

Some pixels in the display are darker or brighter than others.

This condition is an inherent characteristic of liquid crystal displays. This is not a malfunction.

Some menu items cannot be se- lected.

Some menu items become unavailable while the vehicle is driven. Park the vehicle in a safe location, and then operate the navigation system.

Troubleshooting guide 11-3

BASIC OPERATIONS

Black plate (224,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

11-4 Troubleshooting guide

GUID-B7C8CF99-4AE0-48B5-88F3-A2B0020D2A49

Symptom Possible cause Possible solution

Names of roads and locations differ between Plan View and BirdviewTM.

This is because the quantity of the displayed information is reduced so that the screen does not become too crowded. There is also a chance that names of the roads or locations may be displayed multiple times, and the names appearing on the screen may be different because of a processing procedure.

This is not a malfunction.

The vehicle icon is not displayed in the correct position.

The vehicle was transported after the ignition switch was pushed off, for example, by a ferry or car transporter.

Drive the vehicle for a while on a road where GPS signals can be received.

The position and direction of the vehicle icon may be incorrect depending on the driving environments and the levels of positioning accuracy of the navigation system.

This is not a malfunction. Drive the vehicle for a while to automatically correct the position and direction of the vehicle icon.

Current vehicle location (page 10-3)

When the vehicle is traveling on a new road, the vehicle icon is located on another road nearby.

Because the new road is not stored in the map data, the system automatically places the vehicle icon on the nearest road available.

Updated road information will be included in the next version of the map data.

The screen does not switch to the night screen even after turning on the headlights.

The daytime screen was set the last time the headlights were turned on.

Set the screen to the night screen mode using OFF> when turning on the head- lights.

Display settings (page 8-3)

The map does not scroll even when the vehicle is moving.

The current location map screen is not displayed. Push .

The vehicle icon is not displayed. The current location map screen is not displayed. Push .

The GPS indicator on the screen remains gray.

GPS signals cannot be received under certain conditions, such as in a parking garage, on a road with many tall buildings, etc.

Drive on an open, straight road for a while.

GPS signals cannot be received because objects are placed on the instrument panel.

Remove the objects from the instrument panel.

A sufficient number of GPS satellites is not available. Wait for the satellites to move to locations available for the navigation system.

VEHICLE ICON

Black plate (225,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Symptom Possible cause Possible solution

The location of the vehicle icon is misaligned from the actual position.

When using tire chains or replacing the tires, speed calculations based on the speed sensor may be incorrect.

Drive the vehicle for about 30 minutes at approximately 19 MPH (30 km/h) to automatically correct the vehicle icon position. If this does not correct the vehicle icon position, contact a NISSAN dealer.

The map data has a mistake or is incomplete (the vehicle icon position is always misaligned in the same area).

Updated road information will be included in the next version of the map data.

Troubleshooting guide 11-5

Black plate (226,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

11-6 Troubleshooting guide

GUID-73D69F46-E698-4955-83CC-FCBB612B2785

Symptom Possible cause Possible solution

Waypoints are not included in the auto reroute calculation.

Waypoints that have been already passed are not included in the auto reroute calculation.

To go to that waypoint again, edit the route.

Route information is not displayed. Route calculation has not yet been performed. Set the destination and perform route calculation.

The vehicle is not on the suggested route. Drive on the suggested route.

Route guidance is set to off. Turn on route guidance.

Route information is not provided for certain types of roads (roads displayed in gray).

This is not a malfunction.

The auto reroute calculation (or de- tour calculation) suggests the same route as the one previously sug- gested.

Route calculations took priority conditions into consideration, but the same route was calculated.

This is not a malfunction.

A waypoint cannot be added. Five waypoints are already set on the route, including ones that the vehicle has already passed.

A maximum of 5 waypoints can be set on the route. To go to 6 or more waypoints, perform route calculations multiple times as necessary.

[Calculate] must be selected for route calculation after Waypoints are selected from the Edit/Add to Route screen.

Highlight [Calculate] and push after selecting waypoints.

The suggested route is not displayed. Roads near the destination cannot be calculated. Reset the destination to a main or ordinary road, and recalculate the route.

The starting point and destination are too close. Set a more distant destination.

The starting point and destination are too far away. Divide the trip by selecting one or two inter- mediate destinations, and perform route calcula- tions multiple times.

There are time restricted roads (by the day of the week, by time) near the current vehicle location or destination.

Set [Use Time Restricted Roads] to off. Setting conditions for route calculation (page 5-23)

A part of the route is not displayed. The suggested route includes narrow streets (roads displayed in gray).

This is not a malfunction.

ROUTE CALCULATION AND VISUAL GUIDANCE

Black plate (227,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Symptom Possible cause Possible solution

The part of the route that the vehicle has already passed is deleted.

A route is managed by sections between waypoints. If the vehicle passed the first waypoint, the section between the starting point and the waypoint is deleted (it may not be deleted depending on the area).

This is not a malfunction.

An indirect route is suggested. If there are restrictions (such as one-way streets) on roads close to the starting point or destination, the system may suggest an indirect route.

Adjust the location of the starting point or destination.

The system may suggest an indirect route because route calculation does not take into consideration some areas such as narrow streets (gray roads).

Reset the destination to a main or ordinary road, and recalculate the route.

The landmark information does not correspond to the actual information.

This may be caused by insufficient or incorrect map data. Updated information will be included in the next version of the map data.

The suggested route does not exactly connect to the starting point, way- points, or destination.

There is no data for route calculation closer to these locations. Set the starting point, waypoints and destination on a main road, and perform route calculation.

Troubleshooting guide 11-7

Black plate (228,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

11-8 Troubleshooting guide

GUID-79B1EB3E-C67E-4ABD-9140-68CF7EFC4FE2

Symptom Possible cause Possible solution

Voice guidance is not available. Voice guidance is only available at certain intersections marked with . In some cases, voice guidance is not available even when the

vehicle should make a turn.

This is not a malfunction.

The vehicle has deviated from the suggested route. Go back to the suggested route or request route calculation again.

Voice guidance is set to off. Turn on voice guidance.

Route guidance is set to off. Turn on route guidance.

The guidance content does not cor- respond to the actual condition.

The content of voice guidance may vary, depending on the types of intersections at which turns are made.

Follow all traffic rules and regulations.

VOICE GUIDANCE

Black plate (229,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

GUID-5771AD35-50E4-42BB-A944-8F2248131AD2

Symptom Possible cause Possible solution

The system does not accept the voice command. or The system accepts the voice com- mand incorrectly.

The interior of the vehicle is too noisy. Close the windows or have other occupants be quiet.

The volume of the voice is too low. Speak louder.

The volume of the voice is too loud. Speak softer.

Pronunciation is unclear. Speak clearly.

The voice command is given before the voice recognition system is ready.

Push > on the steering wheel switch, and speak a command after the tone sounds.

8 seconds or more have passed after pushing > on the steering wheel switch.

Make sure to speak a command within 8 seconds after the beep tone sounds.

Only a limited range of voice commands is usable for each screen. Use a correct voice command appropriate for the current screen.

The system cannot be operated. The soft top is not closed (for Roadster and CrossCabriolet models). Close the soft top.

INFO:

For the best recognition, speak appropriate commands. Command lists are available earlier in this manual. Standard Mode:

Command List (page 9-6) Alternate Command Mode:

Command List (page 9-14)

Troubleshooting guide 11-9

VOICE RECOGNITION

Black plate (230,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

11-10 Troubleshooting guide

GUID-ED24E6AD-DF16-495B-A77D-50AC2451877E

Symptom Possible cause Possible solution

The traffic information is not dis- played.

The traffic information is not set to on. Set the traffic information to on.

The vehicle is in an area where traffic information is not available. Scroll to an area where traffic information is available.

The subscription to NavTraffic is incomplete, or the subscription to NavTraffic has expired.

Check the subscription status of NavTraffic.

The map scale is set at a level where the display of icons is impossible. Check that the map scale is set at a level in which the display of icons is possible.

Traffic information display and scale le- vels (page 7-7)

With the automatic detour route search ON, no detour route is set to avoid congested areas.

There is no faster route compared to the current route, based on the road network and traffic information.

The automatic detour search is not intended for avoiding traffic jams. It searches for the fastest route taking into consideration such things as traffic jams. Follow the current route. Also see NOTES ON NavTraffic INFORMATION for further information.

The route does not avoid a road section with traffic information stating that it is closed due to road construc- tion.

The navigation system is designed not to avoid this event because the actual period of closure may differ from the declared roadwork period.

Observe the actual road conditions and follow the instructions on the road for detour when necessary. If the road actually is closed, use the detour function and set the detour distance to avoid the road section that is closed.

TRAFFIC INFORMATION

Black plate (231,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

12 Index CURRENT LOCATION MAP SCREENGUID-FEEC94FE-4B9F-41A0-96FB-3BEC085C4BD3

Store Location page 6-2

Nearby Places page 4-5

Map View Change View 2D Map page 3-11

Split: 2D Map page 3-11

Birdview (3D) page 3-11

Split: Birdview Map page 3-11

View Settings Intersection page 5-9

Turn List page 5-9

Fuel Economy page 5-9

Full Map page 5-9

Map Settings Map Orientation page 3-14

Long Range page 3-15

Map Color page 3-15

Birdview Angle page 3-16

Index 12-1

Black plate (232,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

12-2 Index

Map View Map Settings Left Split Map Settings page 3-17

Show All Freeway Exits on Route page 5-10

Auto. Show Turn List on Freeway page 5-10

Map Icons Restaurant page 3-17

Gas Station page 3-17

Hotel page 3-17

ATM page 3-17

Rest Area page 3-17

Store Tracking page 6-6

Black plate (233,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

SCROLL LOCATION MAP SCREENGUID-7596DFB2-F3C4-4C05-8A0A-4C0889737A69

New Dest. Start page 5-2

More Routes page 5-3

Add/Route Info page 5-3

Move Location page 5-4

Store Location page 5-5

Place Info page 5-5

Add to Route page 5-14

Nearby Places page 4-5

Store Location page 5-5

Delete page 6-19

Incident Detail page 7-7

Index 12-3

Black plate (234,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

12-4 Index

DESTINATION SCREENGUID-E2F8B65F-34CA-42E4-8241-1349AB30D6A9

Change Region page 4-2

Street Address page 4-4

Places page 4-5

Home page 4-10

Address Book page 4-11

Previous Destinations page 4-12

Delete Destination page 4-20

Next Page Previous Start Point page 4-13

Stored Routes page 4-14

Phone Number page 4-14

Freeway Entrance/Exit page 4-15

Intersection page 4-17

City Center page 4-18

Black plate (235,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

ROUTE SCREENGUID-F1AC8E3C-9B97-4D64-ABB9-F9212797D10F

Cancel Route/Resume Route page 5-13

Edit/Add to Route page 5-14

Route Info page 5-18

Guidance Settings Guidance Voice page 5-20

Guidance Volume page 5-20

Traffic Announcement page 5-20

Recalculate page 5-21

Detour page 5-22

Traffic Detour page 5-22

Route Settings Basic Route Type page 5-23

Other Routing Choices page 5-24

Index 12-5

Black plate (236,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

12-6 Index

SETTING SCREENGUID-9D631F77-48B2-4416-8ACD-BEEE6620BF4A

Navigation Address Book page 6-8

Map View page 3-13

Map Icons page 3-17

Guidance Settings page 5-26

Route Settings page 5-24

Traffic Info Settings page 7-7

Weather Info Settings page 7-16

Speed Limit Info page 8-6

Others page 8-7

Delete Stored Information page 8-10

Delete All Previous Destinations page 8-10

Delete All Previous Start Point page 8-10

Black plate (237,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Navigation Reset All Navigation Settings to Default page 8-10

Audio Vehicle Owners Manual

Phone Vehicle Owners Manual

Bluetooth Vehicle Owners Manual

Volume & Beeps page 8-11

Display Display Adjustment page 8-3

Color Theme page 8-5

Clock page 8-12

Others Comfort Vehicle Owners Manual

Language & Units page 8-13

Voice Recognition page 9-20

Camera Vehicle Owners Manual

Sonar Vehicle Owners Manual

Image Viewer Vehicle Owners Manual

Index 12-7

Black plate (238,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

12-8 Index

INFORMATION SCREENGUID-D7B9927C-76A4-4208-B7A7-57FADD198BC0

Fuel Economy Vehicle Owners Manual

Maintenance Vehicle Owners Manual

Where am I? page 7-3

Traffic Info page 7-3

Weather Info page 7-8

Map Update page 7-17

Navigation Version page 7-18

Others GPS Position page 7-19

Voice Recognition 9. Voice recognition

Black plate (239,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Number

2D map ......................................................... 3-2, 3-5

A

About map data ............................................... 10-15 About route guidance .... ................................... 5-7 Adding destination or waypoint .... ................. 5-4 Address book ..................................................... 10-2 Adjusting current vehicle location .... ............. 8-9 Adjusting voice guidance volume .... ........... 2-24 Alternate command mode .... ........................ 9-12 Automatic reroute .... ....................................... 10-2 Automatically display warnings/watches ............................... 7-15 Available items after setting destination .... .. 5-2 Available views .... ............................................ 3-12 Avoid area ............................................................ 10-2

B

Background color .... .......................................... 8-5 Basics of voice guidance .... ......................... 10-9 Before starting .... ........................ 2-25, 9-4, 9-19 BirdviewTM .... .................................................... 10-3 BirdviewTM (3D) map .... .......................... 3-3, 3-7 Brightness .............................................................. 8-4 Building graphics .... ........................................... 3-3

C

Canceling route .... ........................................... 2-21 Canceling/reactivating route .... .................... 5-13 Changing BirdviewTM angle .... ..................... 3-16 Changing map view .......................................... 3-11 Changing region ................................................... 4-2 Changing the scale of a map .... ..................... 3-8 Character (letters and numbers) input screen ........................................................ 2-15 Characteristics of liquid crystal display .... 10-19 Clock settings ..................................................... 8-12 Command list ...................................................... 2-27 Confirming how to use voice commands .... ................................ 9-3, 9-17 Confirming route .... ................................ 5-3, 5-18 Control buttons and functions .......................... 2-2 Control panel .... .................................................. 2-2 Current location map screen .... ................... 2-17 Current vehicle location .... ............................ 10-3 Customer assistance .... ................................. 11-2 Customizing Nearby Places .... ........................ 8-8

D

Delete destination .... ....................................... 4-20 Delete stored items .... .................................... 8-10 Deleting all stored items .... ........................... 6-19 Deleting individual item on the map ............. 6-19 Deleting stored item ......................................... 6-18 Deleting stored item individually .... ............. 6-18

Destination screen ................................................ 4-2 Destination weather on suggested route screen .... ................................................. 7-15 Detailed Map Coverage Areas (MCA) for navigation system .............................................. 10-7 Detour .... ............................................................ 10-2 Directions provided and distances to guide points ...................................................... 10-10 Display adjustment .... ........................................ 8-3 Display of current vehicle location .... ......... 10-3 Display settings .... .............................................. 8-3 Display urgent traffic information .... ............... 7-5 Displaying how to operate Voice Recognition System .... ................................... 9-12 Displaying map icons ....................................... 3-17 Displaying small turn arrow on map ............. 5-28 Displaying the current vehicle location .... .... 3-4 Displaying weather information screen .... .... 7-9

E

Editing address book ........................................... 6-8 Editing avoid area .... ....................................... 6-15 Editing route ........................................................ 5-14 Editing stored home and address .... ............. 6-8 Editing stored route .......................................... 6-14 Editing stored tracking .... .............................. 6-14 End-user terms .... .......................................... 10-16 Example of touch panel operation ................. 2-14

Index 12-9

Black plate (240,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

12-10 Index

F

Features of this navigation system .... ......... 10-2 Finding address .................................................... 4-4 Finding place ......................................................... 4-5 For safe operation ................................................ 1-2 Functions disabled while driving ...................... 2-8

G

Giving voice commands ............. 2-25, 9-5, 9-19 Guidance screen settings .... ........................... 5-9 Guidance screens and preview mode .... ..... 5-7 Guidance settings .... ...................................... 5-20

H

How to handle display .... ............................. 10-19 How to input letters and numbers .... ......... 2-15 How to order map data updates .... .......... 10-15 How to store home location .... .................... 2-18 How to use this manual .... ............................... 1-2 How to view map screen ................................ 2-22

I

Incorrect display of vehicle position ............. 10-5 Info on route ........................................................... 7-4 Information screen .... ......................................... 7-2

L

Language and unit settings ............................ 8-13 Language settings .... ...................................... 8-13 Laser product ........................................................ 1-3 List screen .... .................................................... 2-13 Looking at information on the map .... ........ 3-17

M

Maintenance of display .................................. 10-19 Map data .... ..................................................... 10-15 Map menu screen .... ....................................... 2-17 Map scale .... ..................................................... 3-10 Map scrolling information ................................ 3-18 Map symbols .... ................................................ 3-20 Map types .... ........................................................ 3-2 Map update .... .................................................. 7-17 Menu screen and how to operate .... .......... 2-10 Menu screens and their purposes ................ 2-10 Minor adjustment of home or stored address ...................................................... 6-9 Moving a map .... ................................................. 3-5 Moving location of destination .......................... 5-4 multi-function controller with Directional buttons .... ........................................ 2-5 multi-function controller without Directional buttons .... ........................................ 2-5

N

Navigation setting .... .......................................... 8-6 Navigation system status screen .... ............... 2-7 NavTraffic information .... ................................ 10-2 Nearby traffic info. .... ......................................... 7-5 NISSAN voice recognition ..................... 2-25, 9-2 Notes on NavTraffic information ................... 10-13 Notes on NavWeatherXM information ....... 10-14 Notes on voice guidance ............................... 10-12 Number input screen .... ................................. 2-16

O

Operating maps .... .......................................... 2-22 Other navigation settings ................................... 8-7

P

Places of interest (PLACES) directory ........ 10-2 Procedures after setting destination ................ 5-2

R

Recalculating route ........................................... 5-21 Reference symbols .... ........................................ 1-2 Repeating voice guidance .... ...................... 10-11 Reset all navigation settings to default .... . 8-10 Route calculation .... ........................................ 10-8 Route calculation and visual guidance ........ 11-6 Route guidance .... ............................... 10-2, 10-9 Route guidance settings .... ........................... 5-26

Black plate (241,1)

[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]

Route screen ...................................................... 5-12

S

Safety information .... .......................................... 1-2 Scrolled location map screen ......................... 2-18 Searching for destination ................................ 2-20 Searching for detour route taking traffic information into consideration ........................ 5-22 Searching from address book .... ................. 4-11 Selecting route .... ............................................... 5-3 Set average speeds .... ................................... 5-29 Setting alternate command mode .... .......... 9-21 Setting by phone number .... ......................... 4-14 Setting city center .... ...................................... 4-18 Setting color theme ............................................. 8-5 Setting conditions for route calculation .... 5-23 Setting destination ............................................ 2-20 Setting detour route .... ................................... 5-22 Setting freeway entrance/exit .... .................. 4-15 Setting from stored routes .... ....................... 4-14 Setting home as destination .... .................... 4-10 Setting intersection .... .................................... 4-17 Setting left screen display .... ........................ 3-17 Setting map color ............................................ 3-15 Setting map orientation .... ............................. 3-14 Setting point on map .... ................................. 4-19 Setting previous destination ........................... 4-12 Setting previous start point .... ...................... 4-13 Setting the map view .... ................................. 3-13 Setting voice guidance .................................... 2-23

Setting voice guidance at intersections ...... 5-27 Settings long range map view ....................... 3-15 Settings screen .... .............................................. 8-2 Speaker adaptation .... .................................... 9-21 Speed limit indication on map .......................... 8-6 Standard mode ..................................................... 9-3 Start menu .... .................................................... 2-12 Starting route guidance .......................... 2-21, 5-2 Steering wheel switch .... .................................. 2-5 Storing avoid area .... ......................................... 6-7 Storing current vehicle location .... ................. 6-3 Storing home location/address .... ............... 2-18 Storing location .... .................................... 5-5, 6-2 Storing route .... ................................................... 6-5 Storing tracked route .... .................................... 6-6 System feedback announcement modes .... ............................... 9-20

T

Touch panel operation .... ............................... 2-14 Traffic information ............................................ 11-10 Traffic information on map .... ............... 3-21, 7-6 Traffic information settings ................................. 7-7 Transferring information to/from address book .... ............................................... 6-21 Turning voice guidance ON/OFF .................. 2-23

U

Unit settings .... ................................................. 8-14 Using controls to adjust values, levels, etc. .... ..................................................... 2-11

V

Vehicle icon .... .................................................. 11-4 Viewing available traffic information .... .......... 7-3 Viewing available weather information ............ 7-8 Viewing GPS current location information .... .................................... 7-19 Viewing information about current vehicle location .... ............................................... 7-3 Viewing information about searched location ................................................. 5-5 Viewing navigation system version information ............................................ 7-18 Voice command examples .... ............... 9-8, 9-23 Voice guidance .... ................................ 10-3, 11-8 Voice guidance during route guidance .... .... 5-7 Voice recognition .... ........................................ 11-9 Voicetag (only for stored locations) .... ....... 6-10 Volume adjustment .... ..................................... 8-11

W

Weather information settings ......................... 7-16 What is GPS (Global Positioning System)? .... ................................. 10-3

Index 12-11

Manualsnet FAQs

If you want to find out how the Z Coupe Nissan works, you can view and download the Nissan Z Coupe 370Z v2 Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Nissan Z Coupe as well as other Nissan manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Nissan Z Coupe. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Nissan Z Coupe 370Z v2 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Nissan Z Coupe 370Z v2 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Nissan Z Coupe 370Z v2 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Nissan Z Coupe 370Z v2 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Nissan Z Coupe 370Z v2 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.