Contents

Nikon 1 V1 v2 User's Manual PDF

1 of 88
1 of 88

Summary of Content for Nikon 1 V1 v2 User's Manual PDF

No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.

Printed in Europe

SB2C02(11)

6MVA0611-02

AMA14272

DIGITAL CAMERA

User's Manual

En

For Your Safety.............................................................................. iii Notices............................................................................................vi

Introduction...................................................................... 1

Parts of the Camera.......................................................................2

Still Image Mode ............................................................... 8

Taking Photos in Still Image Mode ............................................8 Viewing Photographs .................................................................14

Smart Photo Selector Mode ............................................ 16

Taking Photos in Smart Photo Selector Mode .......................16 Viewing Photographs .................................................................19

Movie Mode .................................................................... 22

HD Movies.....................................................................................22 Slow Motion..................................................................................25 Viewing Movies............................................................................27

Motion Snapshot Mode................................................... 30

Shooting in Motion Snapshot Mode........................................30 Viewing Motion Snapshots........................................................33

More on Photography ..................................................... 34

Self-Timer and Remote Control Modes...................................34

Menu Guide..................................................................... 38

Technical Notes ............................................................... 43

Optional Accessories ..................................................................43 Storage and Cleaning .................................................................52 Caring for the Camera and Battery: Cautions ........................53 Troubleshooting..........................................................................58 Error Messages.............................................................................61 Specifications ...............................................................................63 Index ..............................................................................................72

Table of Contents

i

The following documentation is supplied with the camera.

The Reference Manual can be viewed using Adobe Reader or Adobe Acrobat Reader 5.0 or later, available for free download from the Adobe website. 1 Start the computer and insert the reference manual CD. 2 Double-click the CD (Nikon 1 V1) icon in Computer or My

Computer (Windows) or on the desktop (Mac OS). 3 Double-click the INDEX.pdf icon to display a language selec-

tion screen and click a language to display the Reference Man- ual.

Product Documentation

Quick Start GuideDescribes how to set up your camera.

Users Manual (this manual)Describes how to take and view pictures.

Reference Manual (on CD)A complete guide to using your digital camera, included as a pdf file on the supplied Ref- erence Manual CD-ROM.

Nikon 1 V1 Digital Camera with Support for Interchangeable Lenses

Quick Start Guide This guide provides fi rst-time users with information on setting up the Nikon 1 V1, taking photographs, and installing and using the supplied software. For information on taking and viewing photographs, see the Users Manual. For a complete guide to using your digital camera, see the Reference Manual (on reference manual CD). Additional information on using the supplied software can be found using online help.

Digitutor Digitutor, a series of watch-and-learn manuals in movie form, is available from the following website: http://www.nikondigitutor.com/index_eng.html

En

Before You Begin z Unpack the camera.

Confi rm that the package contains the following items:

Printed in China SB1F01(11)

6MVA0911-01

w Insert the battery and a memory card. Check to be sure the battery and card are in the correct orientat

q Attach the camera strap. Attach the strap securely to the camera eyelets.

Taking Photographs

Mz Rotate the mode dial to C ( till i d )

First Steps

Nikon 1 V1 digital camera

The orange battery latch locks the battery in place when the battery is fully inserted.

BS-N1000 multi accessory port cover

BF-N1000 body cap

Rear Sl un cl

DIGITAL CAMERA

User's Manual

En

ii

Symbols and Conventions To make it easier to find the information you need, the following symbols and conventions are used:

The lens generally used in this manual for illustrative purposes is a 1 NIKKOR VR 1030 mm f/3.55.6.

Digitutor Digitutor, a series of watch and learn manuals in movie form, is available from the following website:

http://www.nikondigitutor.com/index_eng.html

D This icon marks cautions; information that should be read before use to prevent damage to the camera.

A This icon marks notes; information that should be read before using the camera.

0 This icon marks references to other pages in this manual.

A Life-Long Learning As part of Nikons Life-Long Learning commitment to ongoing product support and education, continually-updated information is available on-line at the following sites: For users in the U. S. A.: http://www.nikonusa.com/ For users in Europe and Africa: http://www.europe-nikon.com/support/ For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/

Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently-asked questions (FAQs), and general advice on digital imaging and photography. Additional information may be available from the Nikon representative in your area. For contact information, visit http://imaging.nikon.com/

A For Your Safety Before using the camera for the first time, read the safety instructions in For Your Safety (0 iiiv) and Caring for the Camera and Battery: Cautions (0 53).

iii

To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equip- ment. Keep these safety instructions where all those who use the product will read them.

The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol:

WARNINGS

For Your Safety

A This icon marks warnings. To prevent possible injury, read all warn- ings before using this Nikon product.

AKeep the sun out of the frame. Keep the sun well out of the frame when shooting backlit subjects. Sunlight focused into the camera when the sun is in or close to the frame could cause a fire.

ADo not look at the sun through the view- finder. Viewing the sun or other strong light source through the view- finder could cause permanent visual impairment.

AUsing the viewfinder diopter control: When operating the viewfinder diopter control with your eye to the viewfinder, care should be taken not to put your finger in your eye acci- dentally.

ATurn off immediately in the event of mal- function. Should you notice smoke or an unusual smell coming from the equipment or AC adapter (available separately), unplug the AC adapter and remove the battery immediately, taking care to avoid burns. Continued operation could result in injury. After removing the battery, take the equip- ment to a Nikon-authorized service center for inspection.

ADo not use in the presence of flammable gas. Do not use electronic equipment in the presence of flammable gas, as this could result in explosion or fire.

ADo not disassemble. Touching the prod- ucts internal parts could result in injury. In the event of malfunction, the product should be repaired only by a qualified technician. Should the product break open as the result of a fall or other accident, remove the bat- tery and/or AC adapter and then take the product to a Nikon-authorized service center for inspection.

AKeep out of reach of children. Failure to observe this precaution could result in injury. In addition, note that small parts constitute a chocking hazard. Should a child swallow any part of this equipment, consult a physician immediately.

ADo not place the strap around the neck of an infant or child. Failure to observe this precaution could result in stran- gulation.

iv

ADo not remain in contact with the camera or charger for extended periods while the devices are on or in use. Parts of the device become hot. Leaving the device in direct contact with the skin for extended periods may result in low-temperature burns.

ADo not aim the flash at the operator of a motor vehicle. Failure to observe this precaution could result in accidents.

AObserve caution when using a flash. Using a flash close to the subjects eyes could cause temporary visual impair- ment. Particular care should be obser ved when photographing infants, when the flash should be no less than one meter (39 in.) from the subject.

AAvoid contact with liquid crystal. Should the displays break, care should be taken to avoid injury due to broken glass and to prevent the liquid crystal from the displays touching the skin or entering the eyes or mouth.

AObserve proper precautions when handling b a t te r i e s . Batteries may leak or explode if improperly handled. Observe the following precautions when handling batteries for use in this product: Use only batteries approved for use

in this equipment. Do not short or disassemble the

battery. Be sure the product is off before

replacing the battery.If you are using an AC adapter, be sure it is unplugged.

Do not attempt to insert the battery upside down or backwards.

Do not expose the battery to flame or to excessive heat.

Do not immerse in or expose to water.

Replace the terminal cover when transporting the battery.Do not transport or store the battery with metal objects such as necklaces or hairpins.

Batteries are prone to leakage when fully discharged.To avoid damage to the product, be sure to remove t h e b a t t e r y w h e n n o c h a r g e remains.

When the battery is not in use, attach the terminal cover and store in a cool, dry place.

The battery may be hot immedi- ately after use or when the product has been used on battery power for an extended period.Before remov- ing the battery turn the camera off and allow the battery to cool.

Discontinue use immediately should you notice any changes in the battery, such as discoloration or deformation.

v

AObserve proper precautions when handling the charger: Keep dry.Failure to observe this

precaution could result in fire or electric shock.

Do not short the charger terminals. Failure to observe this precaution could result in overheating and damage to the charger.

Dust on or near the metal parts of the plug should be removed with a dry cloth.Continued use could result in fire.

Do not handle the power cable or go near the charger during thunder- storms. Failure to observe this pre- caution could result in electric shock.

Do not damage, modify, or forcibly tug or bend the power cable. Do not place it under heavy objects or expose it to heat or flame. Should the insulation be damaged and the wires become exposed, take the power cable to a Nikon-authorized service representative for inspec- tion. Failure to observe this precau- tion could result in fire or electric shock.

Do not handle the plug or charger with wet hands.Failure to observe this precaution could result in elec- tric shock.

Do not use with travel converters or adapters designed to convert from one voltage to another or with DC- to-AC inverters.Failure to observe this precaution could damage the product or cause overheating or fire.

AUse appropriate cables. When connect- ing cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose to maintain compliance with product regulations.

ACD-ROMs: CD-ROMs containing soft- ware or manuals should not be played back on audio CD equipment. Playing CD-ROMs on an audio CD player could cause hearing loss or damage the equipment.

vi

No part of the manuals included with this product may be repro- duced, transmitted, transcribed, stored in a retrieval system, or trans- lated into any language in any form, by any means, without Nikons prior written permission.

Nikon reserves the right to change the specifications of the hardware and software described in these manuals at any time and without prior notice.

Nikon will not be held liable for any damages resulting from the use of this product.

While every effort has been made to ensure that the information in these manuals is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representa- tive in your area (address provided separately).

Notice for Customers in Canada CAUTION This Class B digital apparatus com- plies with Canadian ICES-003.

ATTENTION Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.

Notice for Customers in Europe

This symbol indicates that this product is to be col- lected separately.

The following apply only to users in European coun- tries: This product is designated for sepa-

rate collection at an appropriate col- lection point. Do not dispose of as household waste.

For more information, contact the retailer or the local authorities in charge of waste management.

This symbol on the battery indicates that the battery is to be collected separately.

The following apply only to users in European countries: All batteries, whether marked with

this symbol or not, are designated for separate collection at an appro- priate collection point. Do not dis- pose of as household waste.

For more information, contact the retailer or the local authorities in charge of waste management.

Notices

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

vii

Notice for Customers in the U.S. A. Power Cable At voltages over AC 125 V (U.S.A. only): The power cable must be rated for the volt- age in use, be at least AWG no. 18 gauge, and have SVG insulation or better with a NEMA 6P-15 plug rated for AC 250 V 15 A.

Federal Communications Commission (FCC) Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable pro- tection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commu- nications. However, there is no guar- antee that interference will not occur in a particular installation. If this equipment does cause harmful inter- ference to radio or television recep- tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving

antenna. Increase the separation between the

equipment and receiver. Connect the equipment into an out-

let on a circuit different from that to which the receiver is connected.

Consult the dealer or an experi- enced radio/television technician for help.

CAUTIONS Modifications The FCC requires the user be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corpo- ration may void the users authority to operate the equipment.

Interface Cables Use the interface cables sold or pro- vided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules.

Notice for Customers in the State of California WARNING: Handling the cord on this product may expose you to lead, a chemical known to the State of Cali- fornia to cause birth defects or other reproductive harm. Wash hands after handling.

Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel.: 631-547-4200

viii

Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that has been digitally cop- ied or reproduced by means of a scanner, digital camera, or other device may be punishable by law. Items prohibited by law from being copied

or reproduced Do not copy or reproduce paper money, coins, securities, govern- ment bonds, or local government bonds, even if such copies or repro- ductions are stamped Sample.

The copying or reproduction of paper money, coins, or securities which are circulated in a foreign country is prohibited.

Unless the prior permission of the government has been obtained, the copying or reproduction of unused postage stamps or post cards issued by the government is prohibited.

The copying or reproduction of stamps issued by the government and of certified documents stipu- lated by law is prohibited.

Cautions on certain copies and reproduc- tions The government has issued cautions on copies or reproductions of securities issued by private companies (shares, bills, checks, gift certificates, etc.), com- muter passes, or coupon tickets, except when a minimum of necessary copies are to be provided for business use by a company. Also, do not copy or repro- duce passports issued by the govern- ment, licenses issued by public agencies and private groups, ID cards, and tickets, such as passes and meal coupons.

Comply with copyright notices The copying or reproduction of copyrighted creative works such as books, music, paintings, woodcuts, prints, maps, drawings, movies, and p h o t o g r a p h s i s g o v e r n e d b y national and international copyright laws. Do not use this product for the purpose of making illegal copies or to infringe copyright laws.

Disposing of Data Storage Devices Please note that deleting images or formatting memory cards or other data storage devices does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using com- mercially available software, potentially resulting in the malicious use of per- sonal image data. Ensuring the privacy of such data is the user s responsibility.

Before discarding a data storage device or transferring ownership to another person, erase all data using commercial deletion software, or format the device and then completely refill it with images containing no private infor- mation (for example, pictures of empty sky). Care should be taken to avoid injury when physically destroying data storage devices.

ix

AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (I) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (AVC VIDEO) AND/OR (II) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE http://www.mpegla.com

Temperature Warnings The camera may become warm to the touch during use; this is normal and does not indicate a malfunction. At high ambient temperatures, after extended periods of continuous use, or after several photographs have been taken in quick succession, a temperature warning may be displayed, follow- ing which the camera will turn off automatically to minimize damage to its internal circuits. Wait for the camera to cool before resuming use.

Use Only Nikon Brand Electronic Accessories Nikon cameras are designed to the highest standards and include complex electronic circuitry. Only Nikon brand electronic accessories (including charg- ers, batteries, AC adapters, and flash accessories) certified by Nikon specifi- cally for use with this Nikon digital camera are engineered and proven to operate within the operational and safety requirements of this electronic cir- cuitry.

The use of non-Nikon electronic accessories could damage the camera and may void your Nikon warranty. The use of third-party rechargeable Li-ion batteries not bearing the Nikon holographic seal shown at right could interfere with normal operation of the camera or result in the batteries overheating, ignit- ing, rupturing, or leaking.

For more information about Nikon brand accessories, contact a local autho- rized Nikon dealer.

DUse Only Nikon Brand Accessories Only Nikon brand accessories certified by Nikon specifically for use with your Nikon digital camera are engineered and proven to operate within its operational and safety requirements. THE USE OF NON-NIKON

ACCESSORIES COULD DAMAGE YOUR CAMERA AND MAY VOID YOUR NIKON WAR- RANTY.

x

1

s

sIntroduction Thank you for your purchase of a Nikon digital camera that sup- ports interchangeable lenses. For a complete guide to using your digital camera, see the Reference Manual (on CD). To get the most from your camera, please be sure to read both the Quick Start Guide and Users Manual thoroughly and keep them where they will be read by all who use the product.

Camera Settings The explanations in this manual assume that default settings are used.

A Servicing the Camera and Accessories The camera is a precision device and requires regular servicing. Nikon recommends that the camera be inspected by the original retailer or a Nikon-authorized service representative once every one to two years, and that it be serviced once every three to five years (note that fees apply to these services). Frequent inspection and servicing are particu- larly recommended if the camera is used professionally. Any accesso- ries regularly used with the camera, such as lenses or optional flash units, should be included when the camera is inspected or serviced.

ABefore Taking Important Pictures Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for dam- ages or lost profits that may result from product malfunction.

2

s

Take a few moments to familiarize yourself with camera controls and displays. You may find it helpful to bookmark this section and refer to it as you read through the rest of the manual.

The Camera Body

Parts of the Camera

4 6

3

5 7 8 9

2

1

15

10

11

1314

18

16

17

19

20

12

1 Mounting mark 2 AF-assist illuminator

Self-timer lamp ...................................35 Red-eye reduction lamp

3 Shutter-release button..10, 17, 24, 31 4 Movie-record button ............13, 23, 26 5 Speaker .................................................27 6 Power switch.......................................... 5 7 Power lamp ............................................ 5 8 Microphone 9 Infrared receiver (front) .............. 35, 59

10 Focal plane mark (E)

11 Eyelet for camera strap 12 Connector cover 13 Lens release button 14 Lens mount 15 Body cap 16 Multi accessory port cover 17 Multi accessory port 18 Connector for

external microphone........................ 45 19 HDMI mini-pin connector 20 USB and A/V connector

3

s

The Camera Body (Continued)

1 2 3 4 5

18

15

16

17

14

7

9

11

12

10

13

6

8

Press the multi selector up, down, left, or right (1,3, 4, or 2), or rotate it as shown at right. J button

z Motion Snapshot mode (0 30)

y Smart Photo Selector mode (0 16) C Still image mode (0 8) 1 Movie mode (0 22)

1 Eye sensor............................................... 7 2 Electronic viewfinder........................... 7 3 Diopter adjustment control ............... 7 4 & (feature) button ................13, 24, 32 5 W (playback zoom/

thumbnail) control............................14 6 Mode dial 7 K (playback) button ............14, 19, 33 8 Multi selector .......................................39 J (OK) button.....................................39 A (AE-L/AF-L) E (exposure compensation) % (focus mode) E (self-timer).......................................34

9 O (delete) button............ 15, 20, 28, 33 10 Infrared receiver (rear)................ 35, 59 11 Power connector cover

for optional power connector 12 Battery-chamber/

memory card slot cover latch 13 Battery-chamber/

memory card slot cover 14 Tripod socket 15 Memory card access lamp................ 10 16 G (menu) button ........................ 38 17 $ (display) button......................... 6 18 Monitor ............................................... 4, 6

4

s

The Monitor

* Available only in detailed display (0 6).

421 3 5 6 7 8 9

25

22

24 23

19 18 17 16

21 20

13 14

10 11 12

15

2733 282931 3032 26

1 Shooting mode ..................................... 3 2 Exposure mode ...................................40 3 Flexible program indicator 4 Self-timer/remote control mode ....34

Electronic (Hi) * ....................................13 Continuous mode *.............................40

5 Active D-Lighting * .............................41 6 Picture Control * ..................................41 7 White balance * ...................................41 8 Movie settings (HD movies) *...........41

Frame rate (slow motion movies) * ....................40

9 Image size * ..........................................40 10 Image quality * ....................................40 11 Focus mode *

12 AF-area mode *....................................41 13 Flash compensation ...........................41 14 Flash mode ...........................................41 15 Flash-ready indicator 16 Battery indicator * ................................. 5 17 Sound settings * ..................................42 18 GPS connection indicator *

19 Exposure compensation 20 Focus area.............................................10 21 Face-priority AF * ................................11 22 Microphone sensitivity * ...................41 23 Time elapsed................................. 23, 26 24 Recording indicator..................... 23, 26 25 ISO sensitivity indicator.....................41

Auto ISO sensitivity indicator 26 K (appears when memory remains

for over 1,000 exposures) 27 Number of exposures remaining...... 5

Number of shots remaining before memory buffer fills

White balance recording indicator Card warning indicator

28 Time available............................... 23, 26 29 ISO sensitivity ......................................41 30 Autoexposure (AE) lock indicator 31 Aperture 32 Shutter speed 33 Metering ...............................................41

5

s

Turning the Camera On

Battery Level

Number of Exposures Remaining The monitor shows the number of pictures that can be stored on the memory card at current settings.

Press the power switch to turn the cam- era on. The power lamp will briefly light green and the monitor will turn on.

A Turning the Camera Off To turn the camera off, press the power switch again. The monitor will turn off.

Check the battery level and number of exposures remaining in the monitor.

Battery level Exposures remaining

Display Description

NO ICON Battery fully charged or partially discharged; level shown by L or K icon in detailed display (0 6).

H Low battery. Ready fully-charged battery or prepare to charge battery.

Cannot take pictures. Insert fully-charged battery.

Battery exhausted; shutter-release disabled. Insert charged battery.

A Formatting Memory Cards If this is the first time the memory card will be used in the camera or if the card has been formatted in another device, select Format memory card in the setup menu and follow the on-screen instructions to format the card (0 42). Note that this permanently deletes any data the card may contain. Be sure to copy any photographs and other data you wish to keep to a computer before proceeding.

6

s

The $ (Display) Button

Shooting Playback

Press $ to cycle through shooting and playback indicators as shown below.

$ button

Simplified display

Detailed display

Monitor off (viewfinder is not

affected; 0 7)

Simple photo info

Detailed photo info

Image only

7

s

The Electronic Viewfinder Use the viewfinder when bright ambient lighting conditions make it difficult to see the display in the monitor. The view- finder display turns on when you put your eye to the viewfinder and is identical to that shown on page 4; the monitor turns off automatically. Note that the monitor may turn off and the viewfinder turn on if you place your finger or other objects near the eye sensor; avoid cover- ing the sensor when using the monitor.

To focus the display, use the diopter adjustment control. When operating the control with your eye to the viewfinder, be careful not to put your finger or finger- nails in your eye.

Eye sensor

z

8

z

Still Image Mode Still image mode is the mode generally used for taking photos.

1 Select still image mode.

Taking Photos in Still Image Mode

Rotate the mode dial to C. Mode dial

A Automatic Scene Selection (h Scene auto selector) At default settings, the camera will auto- matically analyze the subject and select the appropriate scene. The selected scene is shown in the monitor.

Scene icon

c Portrait: Human portrait subjects. d Landscape: Landscapes and cityscapes. f Night portrait: Portrait subjects framed against dark backgrounds. e Close up: Subjects close to the camera.

Z Auto: Subjects suited to Z mode or that do not fall into the categories listed above.

9

z

2 Ready the camera.

3 Frame the photograph.

Remove the lens cap and hold the camera securely with both hands, being careful not to obstruct the lens, AF-assist illuminator, or microphone. Rotate the camera as shown at lower right when taking pictures in tall (portrait) orientation.

Shutter speeds slow when lighting is poor; use of an optional flash unit (0 44) or a tripod is recommended.

Position your subject in the center of the frame.

10

z

4 Focus. Press the shutter-release button half- way to focus. If the subject is poorly lit, the AF-assist illuminator (0 2) may light to assist the focus operation.

If the camera is able to focus, the selected focus area will be highlighted in green and a beep will sound (a beep may not sound if the subject is moving).

If the camera is unable to focus, the focus area will be displayed in red.

While the shutter-release button is pressed halfway, the display will show the number of exposures that can be stored in the memory buffer (r).

5 Shoot. Smoothly press the shutter-release button the rest of the way down to release the shutter and record the photograph. The access lamp will light and the photograph will be dis- played in the monitor for a few sec- onds (the photo will automatically clear from the display when the shut- ter-release button is pressed halfway). Do not eject the memory card or remove or disconnect the power source until the lamp has gone out and recording is complete.

Access lamp

Focus area

Buffer capacity

11

z

A Face-Priority AF The camera detects and focuses on portrait subjects (face-priority AF). A double yellow border will be displayed if a portrait subject is detected facing the camera (if multiple faces, up to a maximum of five, are detected, the camera will select the closest subject). Press the shutter-release button halfway to focus on the subject in the double yellow border. The border will clear from the display if the camera can no longer detect the subject (because, for example, the subject has looked away).

A Exposure Mode To make adjustments to shutter speed, aperture, or other settings, select P Programmed auto, S Shutter-priority auto, A Aperture-pri- ority auto, or M Manual for Exposure mode in the shooting menu (0 40).

A Lenses with Retractable Lens Barrel Buttons Lenses with retractable lens barrel buttons can not be used when retracted. To unlock and extend the lens, keep the retractable lens barrel button pressed (q) while rotating the zoom ring (w). The lens can be retracted and the zoom ring locked by pressing the retract- able lens barrel button and rotating the ring in the opposite direction. Retract the lens before removal, and be care- ful not to press the retractable lens barrel button while attaching or removing the lens.

12

z

AUsing a Zoom Lens Use the zoom ring to zoom in on the subject so that it fills a larger area of the frame, or zoom out to increase the area visible in the final photo- graph (select longer focal lengths on the lens focal length scale to zoom in, shorter focal lengths to zoom out).

Zoom in Zoom out

Zoom ring

A Auto Power Off If no operations are performed for about thirty seconds, the displays will turn off and the power lamp (0 5) start to blink. The camera can be reactivated by operating the buttons, mode dial, or other camera con- trols. If no operations are performed for about three minutes after the displays have turned off, the camera will turn off automatically.

A Flicker You may notice flicker or banding in the displays or in movies when shooting under certain types of lighting, such as fluorescent or mer- cury-vapor lamps. This can be reduced by choosing a Flicker reduc- tion option that matches the frequency of the local AC power supply (0 42).

A See Also The beep that sounds when the camera focuses or the electronic shut- ter is used can be silenced using the Sound settings option in the setup menu (0 42).

13

z

Choosing a Shutter Type To choose the shutter type for still image mode, press & and use the multi selector and J button to choose from the follow- ing shutter types (0 40): mechanical (Mechanical, suited to most situations), electronic (Electronic, a silent shutter for quiet surroundings), and high-speed electronic (Electronic (Hi)).

Recording Movies in Still Image Mode In still image mode, you can record mov- ies with sound at a frame size of 1,072 720 pixels (aspect ratio: 3 : 2). Press the movie-record button to start and stop recording (0 22); in still-image mode, recording will also end if the shutter- release button is held all the way down until a photograph is taken.

A Electronic (Hi) Choose from frame rates of 10 fps, 30 fps, and 60 fps (0 40). At the default setting of 10 fps, the camera takes pictures at about 10 frames per second (fps) while the shutter button is pressed and the camera focuses on the sub- ject in the center of the frame; face detection (0 11) is not available. The camera can record up to about 34 frames in a single burst. At frame rates of 30 and 60 fps, face detection is available but focus and exposure are fixed at the values for the first photo- graph in each series; the number of frames that can be recorded in a single burst is about 30.

& button

Movie-record button

14

z

To end playback and return to shooting mode, press the shutter- release button halfway.

Viewing Photographs Press K to display your most recent pho- tograph full frame in the monitor (full- frame playback).

K button

Press 4 or 2 or rotate the multi selector to view additional pictures.

To zoom in on the center of the current image, press the W control up. Press W down to zoom out. To view multiple images, press W down when the picture is displayed full frame.

W control

A See Also For information on toggling photo info on or off, see page 6. See page 40 for slide show options.

15

z

Deleting Pictures To delete the current picture, press O. A confirmation dialog will be displayed; press O again to delete the picture and return to playback, or press K to exit without deleting the picture. Note that once deleted, pictures can not be recovered.

ADeleting Multiple Pictures The Delete option in the playback menu (0 40) can be used to delete selected pic- tures, all pictures, pictures taken on selected dates, or pictures previously selected as can- didates for deletion.

O button

8

16

8

Smart Photo Selector Mode Choose Smart Photo Selector mode for photos that capture a fleeting expression on the face of a portrait subject or other hard-to-time shots such as group photos in party scenes. Each time the shutter is released, the camera automatically selects the best shot and four best shot candidates based on composition and motion.

1 Select Smart Photo Selector mode.

2 Frame the photograph.

Taking Photos in Smart Photo Selector Mode

Rotate the mode dial to y. Mode dial

Holding the camera as shown on page 9, compose the photograph with your subject in the center of the frame.

17

8

3 Begin buffering photographs. Press the shutter-release button half- way to focus (0 10). An icon will be displayed as the camera begins recording images to the memory buffer. The camera continuously adjusts focus to account for changes in the distance to the subject in the AF area brackets while the shutter- release button is pressed halfway.

AF area brackets

ABuffering Buffering begins when the shutter-release button is pressed halfway and ends after about 90 seconds or when the shutter-release button is pressed all the way down.

Shutter-release button pressed

halfway to focus

Shutter-release button pressed all the way

down Shooting ends

Buffering

18

8

4 Shoot. Smoothly press the shutter-release button the rest of the way down. The camera will compare shots recorded to the buffer both before and after the shutter-release button was pressed, and select five to copy to the memory card. Note that some time may be required. The best picture is displayed in the monitor when recording is com- plete.

A Smart Photo Selector Mode The camera automatically chooses a scene mode appropriate to the subject (automatic scene selection; 0 8). Movies can not be recorded, and pressing the movie-record button has no effect.

The optional SB-N5 flash unit is equipped with a capture illuminator which lights during buffering. Buffering ends automatically and the capture illuminator turns off after shooting or if the shutter-release but- ton is kept pressed halfway for about six seconds. Buffering can be resumed by removing your finger from the shutter-release button and then pressing it halfway.

19

8

Choosing the Best Shot

Viewing Photographs Press K and use the multi selector to display photographs taken with the Smart Photo Selector (0 14; pictures taken with the Smart Photo Selector are indicated by a y icon). Of the five pho- tographs recorded by the Smart Photo Selector, only the best shot will be dis- played (when you press the multi selec- tor right to view the next picture, the camera will skip over the best shot can- didates, with the result that the next pic- ture displayed will not have a fi le number that immediately follows that of the current picture). To end playback and return to shooting mode, press the shutter-release button halfway.

K button

When a photograph taken with the Smart Photo Selector is displayed, you can choose the best shot by pressing J. Press 4 or 2 to view the other pictures in the sequence and press J to select the current picture as the best shot. To return to normal playback, press K.

20

8

Deleting Pictures Pressing O when a picture taken with the Smart Photo Selector is selected displays a confirmation dialog; press O again to delete the photographs selected by the Smart Photo Selector, or press K to exit without deleting the pictures. Note that once deleted, pictures can not be recovered.

ADeleting Individual Photographs Pressing the O button in the best shot selec- tion dialog (0 19) displays the following options; highlight an option using the multi selector and press J to select. This image: Delete the current photo (note

that the picture currently selected as the best shot can not be deleted).

All except best shot: Delete all photos in the sequence except the one currently selected as the best shot.

A confirmation dialog will be displayed; to delete the selected image or images, highlight Yes and press J.

O button

21

8

y

22

y

Movie Mode Choose movie mode to shoot high-definition (HD) or slow- motion (0 25) movies using the movie-record button.

Record movies with sound at an aspect ratio of 16 : 9.

1 Select movie mode.

2 Frame the opening shot.

D The 0 Icon A 0 icon indicates that movies can not be recorded.

HD Movies

Rotate the mode dial to 1. An HD movie crop with an aspect ratio of 16 : 9 will appear in the display.

Mode dial

Holding the camera as shown on page 9, frame the opening shot with your subject in the center of the dis- play.

A Exposure Mode By default, the camera automatically chooses a scene mode appropri- ate to the subject (automatic scene selection; 0 8).

A See Also See page 41 for fade in/fade out and frame size and rate options.

23

y

3 Start recording. Press the movie-record button to begin recording. A recording indica- tor, the time elapsed, and the time available are displayed while record- ing is in progress.

4 End recording. Press the movie-record button again to end recording. Recording will end automatically when the maximum length is reached, the memory card is full, another mode is selected, the lens is removed, or the camera becomes hot (0 ix).

A Audio Recording Be careful not to cover the microphone and note that the built-in microphone may record sounds made by the camera or lens. By default, the camera focuses continuously. The Movie sound options item in the shooting menu offers sensitiv- ity and wind noise options for both built- in and external microphones (0 45).

AMaximum Length At default settings, HD movies can be up to 4 GB in size and 20 min- utes in length; note that depending on memory card write speed, shooting may end before this length is reached (0 47).

A Exposure Lock In exposure modes other than h Scene auto selector, exposure will lock while the A (multi selector up) button is pressed.

Movie-record button

Recording indicator/ Time elapsed

Time available

24

y

Taking Photographs During HD Movie Recording Press the shutter-release button all the way down to take a photograph without interrupting HD movie recording. Photo- graphs taken during movie recording have an aspect ratio of 16 : 9.

Choosing the Movie Type To choose between high definition and slow motion recording, press & and use the multi selector and J button to choose from the following options: HD movie: Record movies in HD. Slow motion: Record slow-motion movies

(0 25).

A Taking Photographs During Movie Recording Up to 20 photographs can be taken with each movie shot. Please note that photographs can not be taken with slow-motion movies.

DRecording Movies Flicker, banding, or distortion may be visible in the displays and in the final movie under fluorescent, mercury vapor, or sodium lamps or if the camera is panned horizontally or an object moves at high speed through frame (flicker and banding can be reduced in HD movies by choosing a Flicker reduction option that matches the frequency of the local AC power supply; 0 42). Bright light sources may leave after-images when the camera is panned. Jagged edges, color fring- ing, moir, and bright spots may also appear. When recording movies, avoid pointing the camera at the sun or other strong light sources. Failure to observe this precaution could result in damage to the cameras inter- nal circuitry.

& button

25

y

Record silent movies with an aspect ratio of 8 : 3. Movies are recorded at 400 fps and play back at 30 fps.

1 Select movie mode.

2 Select slow-motion mode.

3 Frame the opening shot.

Slow Motion

Rotate the mode dial to 1. Mode dial

Press the & button and use the multi selector and J button to select Slow motion. A slow-motion movie crop with an aspect ratio of 8 : 3 will appear in the display.

& button

Holding the camera as shown on page 9, frame the opening shot with your subject in the center of the dis- play.

26

y

4 Start recording.

5 End recording. Press the movie-record button again to end recording. Recording will end automatically when the maximum length is reached, the memory card is full, another mode is selected, the lens is removed, or the camera becomes hot (0 ix).

Press the movie-record button to begin recording. A recording indica- tor, the time elapsed, and the time available are displayed while record- ing is in progress. The camera focuses on the subject at the center of the dis- play; face detection (0 11) is not available.

Movie-record button

Recording indicator/ Time elapsed

Time available

AMaximum Length Up to 5 seconds or 4 GB of footage can be recorded; note that depending on memory card write speed, shooting may end before this length is reached (0 47).

A Exposure Mode The default exposure mode for slow-motion movie recording is P Programmed auto (0 40). h Scene auto selector is not available in slow-motion movie mode.

A See Also See page 40 for frame rate options.

27

y

Movies are indicated by a 1 icon in full-frame playback (0 14). Press J to start playback.

The following operations can be performed:

Viewing Movies

1 icon/Length Movie playback indicator/

Current position/total length

Guide Volume

To Use Description

Pause Pause playback.

Play J Resume playback when the movie is paused or during rewind/advance.

Advance/ rewind

/

Press 4 to rewind, 2 to advance. Speed increases with each press, from 2 to 5 to 10 to 15 . If playback is paused, the movie rewinds or advances one frame at a time; keep the button pressed for continuous rewind or advance. You can also rotate the multi selector to rewind or advance when playback is paused.

Adjust volume

W Press up to increase volume, down to decrease.

Return to full-frame playback

/K Press 1 or K to exit to full-frame playback.

Exit to shooting

mode

Press the shutter-release button halfway to exit to shooting mode. Photographs can be taken immediately.

28

y

Deleting Movies To delete the current movie, press O. A confirmation dialog will be displayed; press O again to delete the movie and return to playback, or press K to exit without deleting the movie. Note that once deleted, movies can not be recovered.

O button

29

y

9

30

9

Motion Snapshot Mode Choose Motion Snapshot mode to record brief movie vignettes with your photographs. Each time the shutter is released, the camera records a still image and about a second of movie foot- age. When the resulting Motion Snapshot is viewed on the camera, the movie will play back in slow motion over approxi- mately 2.5 s, followed by the still image.

1 Select Motion Snapshot mode.

2 Frame the picture.

Shooting in Motion Snapshot Mode

Rotate the mode dial to z. Mode dial

Holding the camera as shown on page 9, compose the photograph with your subject in the center of the frame.

31

9

3 Begin buffering.

4 Shoot. Smoothly press the shutter-release button the rest of the way down. The camera will record a photograph, together with about a second of movie footage beginning before and ending after the time the shutter- release button was pressed. Note that some time may be required. When recording is complete, the photo- graph will be displayed for a few sec- onds.

Press the shutter-release button half- way to focus (0 10). An icon will be displayed as the camera begins recording footage to the memory buffer.

ABuffering Buffering begins when the shutter-release button is pressed halfway and ends after about 90 seconds or when the shutter-release button is pressed all the way down.

Shutter-release button pressed

halfway to focus

Shutter-release button pressed all the way

down Shooting ends

Buffering

32

9

Choosing a Theme To choose the background music for the movie, press & and use the multi selector and J button to choose from Beauty, Waves, Relaxation, and Tenderness.

& button

AMotion Snapshot Mode By default, the camera automatically chooses a scene mode appropri- ate to the subject (automatic scene selection; 0 8). Live audio is not recorded. Movies can not be recorded using the movie-record button.

The optional SB-N5 flash unit is equipped with a capture illuminator which lights during buffering. Buffering ends automatically and the capture illuminator turns off after shooting or if the shutter-release but- ton is kept pressed halfway for about six seconds. Buffering can be resumed by removing your finger from the shutter-release button and then pressing it halfway.

33

9

Deleting Motion Snapshots To delete the current Motion Snapshot, press O. A confirmation dialog will be displayed; press O again to delete the photo and movie and return to play- back, or press K to exit without deleting the file. Note that once deleted, Motion Snapshots can not be recovered.

Viewing Motion Snapshots Press K and use the multi selector to display a Motion Snapshot (0 14; Motion Snapshots are indicated by a z icon). Pressing J when a Motion Snap- shot is displayed plays back the movie portion in slow motion over a period of about 2.5 s, followed by the photo; the background track plays for about 10 s. To end playback and return to shooting mode, press the shutter-release button halfway.

K button

O button

t

34

t

More on Photography

The self-timer and optional ML-L3 remote control (0 45) can be used to reduce camera shake or for self-portraits. The following options are available:

1 Mount the camera on a tripod. Mount the camera on a tripod or place the camera on a sta- ble, level surface.

2 Display self-timer options.

Self-Timer and Remote Control Modes

Off Self-timer and remote control off. The shutter is released when the camera shutter-release button is pressed.

c 10 s The shutter is released 2, 5, or 10 seconds after the shutter-release button is pressed all the way down. Choose 2 s to reduce camera shake, 5 s or 10 s for self-portraits.

b 5 s

a 2 s

" Delayed remote

The shutter is released 2 s after the shutter-release button on the optional ML-L3 remote control is pressed.

# Quick response remote

The shutter is released when the shutter-release but- ton on the optional ML-L3 remote control is pressed.

ABefore Using the Remote Control Before using the remote control for the first time, remove the clear plas- tic battery-insulator sheet.

Press 4 (E) to display self-timer options.

35

t

3 Select the desired option.

4 Frame the photograph and shoot. Self-timer mode : Press the shutter- release button halfway to focus, and then press the button the rest of the way down. The self-timer lamp will start to blink and a beep will begin to sound. Two seconds before the photo is taken, the lamp will stop blinking and the beeping will become more rapid.

Remote control mode: Aim the ML-L3 at either of the infrared receivers on the camera (0 2, 3) and press the ML-L3 shutter-release button (stand at a dis- tance of 5 m/16 ft or less when using the front receiver, 1.5 m/5 ft, or less when using the rear receiver). In delayed remote mode, the self-timer lamp will light for about two seconds before the shutter is released. In quick-response remote mode, the self- timer lamp will flash after the shutter has been released.

Use the multi selector to highlight the desired option and press J.

36

t

Note that the timer may not start or a photograph may not be taken if the camera is unable to focus or in other situations in which the shutter can not be released. Turning the camera off cancels self-timer and remote control modes. Remote control modes are cancelled automatically if no operations are performed for about five minutes after the mode is selected in Step 3.

AMovie Mode In self-timer mode, start and stop the timer by pressing the movie- record button instead of the shutter-release button. In remote control mode, the ML-L3 shutter-release button functions as the movie-record button.

A Tripod Mounting Spacer Use an optional TA-N100 tripod mounting spacer to prevent larger lenses coming into contact with the tripod head when the camera is mounted on a tripod (0 46).

A See Also See page 42 for options controlling how long the camera will wait for a signal from the remote and the beep that sounds when the self-timer or remote control is used.

37

t

U

38

U

Menu Guide Most shooting, playback, and setup options can be accessed from the camera menus. To view the menus, press the G button.

G button

Tabs Choose from the following menus: K Playback menu (0 40) B Setup menu (0 42) C y 1 z Shooting menu (0 40)

Menu options Options in current menu.

Slider shows position in current menu.

39

U

Using the Menus

To exit the menus and return to shooting mode, press the shut- ter-release button halfway (0 10).

Use the multi selector to navigate the menus.

Multi selector

1 2

Select desired menu. Press 2 to place cursor in selected menu.

3 4

Highlight menu item. Press 2 to display options.

5 Note: The items listed may vary with camera settings. Items displayed in gray are not currently available.

Highlight desired option and press J to select.

40

U

Playback Menu Options

Shooting Menu Options

Delete Delete multiple images. Slide show View movies and photos in a slide show.

Rotate tall Rotate tall (portrait-orientation) pictures for display during playback.

DPOF print order Create digital print orders. Protect Protect pictures from accidental deletion.

Rating Rate pictures.

D-Lighting Brighten shadows in dark or back-lit photos, creating a retouched copy that is saved separately from the unmodified original.

Resize Create small copies of selected pictures.

Crop Create cropped copies of selected pictures.

Edit movie Create copies of movies from which unwanted footage has been trimmed.

Reset shooting options

Reset shooting options to default values.

Exposure mode Choose how the camera sets shutter speed and aper- ture.

Image quality Choose a file format and compression ratio. Image size Choose a size for new photos.

Continuous Take photos one at a time or in a burst. Shutter type Adjust shutter settings for still image mode. Frame rate Choose a frame rate for slow-motion movies (0 25).

41

U

Movie settings Choose HD movie frame size and frame rate (0 22). Metering Choose how the camera meters exposure.

White balance Adjust settings for different types of lighting. ISO sensitivity Control the cameras sensitivity to light. Picture Control Choose how the camera processes pictures.

Custom Picture Control

Create custom Picture Controls.

Color space Choose a color space for new pictures. Active D-Lighting Avoid loss of detail in highlights and shadows.

Long exposure NR Reduce noise in long time-exposures. High ISO noise reduction

Reduce noise at high ISO sensitivities.

Fade in/fade out Shoot HD movies with fade in/fade out effects.

Movie sound options

Choose sound recording options.

Interval timer shooting

Take photos at a pre-selected interval.

Vibration reduction Adjust settings for lenses with vibration reduction.

AF-area mode Choose how the focus area is selected. Face-priority AF Turn face-priority AF on or off. Built-in AF assist Control the built-in AF-assist illuminator.

Flash mode Choose a flash mode for optional flash units. Flash control Choose a flash control mode for optional flash units. Flash compensation

Control the output of optional flash units.

42

U

Setup Menu Options

Reset setup options Reset setup menu options to default values. Format memory card Format the memory card.

Slot empty release lock Allow the shutter to be released when no memory card is inserted in the camera.

Welcome screen Display a welcome message at startup. Display brightness Adjust the brightness of the displays.

Grid display Display a framing grid. Sound settings Choose the sounds made during shooting. Auto power off Choose the auto power off delay.

Remote on duration Choose how long the camera waits for a signal from a remote control.

Assign AE/AF-L button Choose the role played by the 1 (A) button.

Shutter button AE lock Choose whether exposure locks when the shutter- release button is pressed halfway.

Video mode Choose a video standard.

HDMI device control Choose whether remote controls for HDMI-CEC devices to which the camera is connected can be used to operate the camera.

Flicker reduction Reduce flicker or banding.

Reset file numbering Reset file numbering. Time zone and date Set the camera clock. Language Choose a language for the camera displays.

Auto image rotation Record camera orientation with pictures. Battery info View battery status. GPS Adjust settings for optional GPS units.

Pixel mapping Check and optimize the camera image sensor and image processors.

Firmware version Display the current firmware version.

43

n

nTechnical Notes Read this chapter for information on compatible accessories, cleaning and storing the camera, and what to do if an error mes- sage is displayed or you encounter problems using the camera.

At the time of writing, the following accessories were available for your camera.

Optional Accessories

Lenses 1 mount lenses

DRed-Eye Reduction Lenses that block the subjects view of the red-eye reduction lamp may interfere with red-eye reduction.

A Lens f-number The f-number given in lens names is the maximum aperture of the lens.

Mount Adapter

Mount Adapter FT1

44

n

Flash units SB-N5: The SB-N5 has a Guide Number of 8.5/27.9 (m/ft, ISO 100, 20 C/68 F; Guide Number at ISO 200 is 12/39.4). When mounted on the Nikon 1 V1, it supports i-TTL and manual flash control.

AGuide Number To calculate the range of the flash at full power, divide the Guide Number by the aperture. For example, at ISO 100 the SB-N5 has a Guide Number of 8.5 m or 27.9 ft (35 mm zoom head position); its range at an aperture of f/5.6 is 8.55.6 or about 1.5 meters (or in feet, 27.95.6=approximately 5 ft). For each twofold increase in ISO sensitivity, multiply the Guide Number by the square root of two (approximately 1.4).

Power sources Rechargeable Li-ion Battery EN-EL15 (0 69): Additional EN-EL15 batteries are available from local retailers and Nikon- authorized service representatives.

Battery Charger MH-25 (0 69): Recharge EN-EL15 batteries. Power Connector EP-5B, AC Adapter EH-5b: These accessories

can be used to power the camera for extended periods (EH-5a and EH-5 AC adapters can also be used). An EP-5B power connector is required to connect the camera to the EH-5b, EH-5a, or EH-5; see page 48 for details.

45

n

Remote controls (0 34)

Wireless Remote Control ML-L3: The ML-L3 uses a 3 V CR2025 battery.

Pressing the battery-chamber latch to the right (q), insert a fingernail into the gap and open the battery chamber (w). Ensure that the battery is in the correct orientation (r).

Software Capture NX 2: A complete photo editing package offering such features as white balance adjustment and color con- trol points. Note: Use the latest versions of Nikon software; see the web- sites listed on page ii for the latest information on supported operating systems. At default settings, Nikon Message Cen- ter 2 will periodically check for updates to Capture NX 2 and other Nikon software and firmware while you are logged in to an account on the computer and the computer is con- nected to the Internet. A message is automatically displayed when an update is found.

Body caps Body Cap BF-N1000: The body cap keeps the low-pass filter free of dust when a lens is not in place.

Microphones Stereo Microphone ME-1: Connect the ME-1 to the camera microphone jack to record stereo sound while reducing the noise caused by lens vibration being recorded during autofocus.

GPS units GPS Unit GP-N100: Record latitude, longitude, altitude, and UTC time with pictures. The GP-N100 supports Assisted GPS (A-GPS or aGPS), which uses supplementary informa- tion for faster acquisition of GPS data.

46

n

Tripod adapters

Tripod Adapter TA-N100: Prevents large lenses from coming into contact with the tripod head when the camera is mounted on a tripod. Attaching the TA-N100

1 Attach the TA-N100 to the camera. After turning the camera off, insert the TA-N100 in the camera tripod mount (q) and, keeping the projection on the TA-N100 aligned with the front of the camera, rotate the screw in the direction shown (w) to fasten the TA-N100 in place.

2 Attach a tripod. Attach a tripod (available separately from third-part sup- pliers) to the TA-N100 (e). Hold the camera while fasten- ing the tripod to ensure that the tripod is securely attached.

47

n

Approved Memory Cards The following cards have been tested and approved for use in the camera. Cards with class 6 or faster write speeds are recom- mended for movie recording. Recording may end unexpectedly when cards with slower write speeds are used.

1 Check that any card readers or other devices with which the card will be used support 2 GB cards.

2 Check that any card readers or other devices with which the card will be used are SDHC-compliant. The camera supports UHS-1.

3 Check that any card readers or other devices with which the card will be used are SDXC-compliant. The camera supports UHS-1.

Other cards have not been tested. For more details on the above cards, please contact the manufacturer.

SD cards SDHC cards 2 SDXC cards 3

SanDisk 2 GB 1 4 GB, 8 GB, 16 GB, 32 GB

64 GB Toshiba

Panasonic 48 GB, 64 GB Lexar Media

4 GB, 8 GB, 16 GB

Platinum II

4 GB, 8 GB, 16 GB, 32 GB Professional

Full-HD Video 4 GB, 8 GB, 16 GB

48

n

Attaching a Power Connector and AC Adapter Turn the camera off before attaching an optional power connec- tor and AC adapter.

1 Ready the camera. Open the battery-chamber (q) and power connector (w) covers.

2 Insert the EP-5B power connector. Be sure to insert the connector in the orientation shown, using the connec- tor to keep the orange battery latch pressed to one side. The latch locks the connector in place when the con- nector is fully inserted.

3 Close the battery-chamber cover. Position the power connector cable so that it passes through the power con- nector slot and close the battery- chamber cover.

49

n

4 Connect the AC adapter. Connect the AC adapter power cable to the AC socket on AC adapter (e) and the EP-5B power cable to the DC socket (r). A P icon is displayed in the monitor when the camera is powered by the AC adapter and power connector.

r

e

50

n

System Requirements The system requirements for the Short Movie Creator are:

If your system does not meet the above requirements, only ViewNX 2 will be installed (0 51).

Windows CPU 2 GHz intel Core 2 Duo or better

OS

Pre-installed versions of Windows 7 Home Basic/Home Premium/Professional/Enterprise/Ultimate (Service Pack 1), Windows Vista Home Basic/Home Premium/Business/ Enterprise/Ultimate (Service Pack 2), or Windows XP Home Edition/Professional (Service Pack 3). All installed programs run as 32-bit applications in 64-bit editions of Windows 7 and Windows Vista.

RAM 1.5 GB or more with at least 128 MB of video RAM (2 GB or more with at least 256 MB of video RAM recommended for creating HD movies)

Hard-disk space A minimum of 500 MB available on the startup disk (1 GB or more recommended)

Monitor Resolution: 1,024 768 pixels (XGA) or more Color: 32-bit color (True Color) or more

Other DirectX 9 or later and OpenGL 1.4 or later

Mac OS CPU 2 GHz intel Core 2 Duo or better OS Mac OS X version 10.5.8, 10.6.8, or 10.7.2

RAM 1 GB or more

Hard-disk space A minimum of 500 MB available on the startup disk (1 GB or more recommended)

Monitor Resolution: 1,024 768 pixels (XGA) or more Color: 24-bit color (millions of colors) or more

A Supported Operating Systems See the websites listed on page ii for the latest information on sup- ported operating systems.

51

n

The system requirements for the ViewNX 2 are:

Windows

CPU

Photos/JPEG movies: Intel Celeron, Pentium 4, or Core series, 1.6 GHz or better

H.264 movies (playback): 3.0 GHz or better Pentium D H.264 movies (editing): 2.6 GHz or better Core 2 Duo

OS

Pre-installed versions of Windows 7 Home Basic/Home Premium/Professional/Enterprise/Ultimate (Service Pack 1), Windows Vista Home Basic/Home Premium/Business/ Enterprise/Ultimate (Service Pack 2), or Windows XP Home Edition/Professional (Service Pack 3). All installed programs run as 32-bit applications in 64-bit editions of Windows 7 and Windows Vista.

RAM Windows 7/Windows Vista: 1 GB or more (2 GB or more recom-

mended) Windows XP: 512 MB or more (2 GB or more recommended)

Hard-disk space A minimum of 500 MB available on the startup disk (1 GB or more recommended)

Monitor Resolution: 1024 768 pixels (XGA) or more (1280 1024

pixels (SXGA) or more recommended) Color: 24-bit color (True Color) or more

Mac OS

CPU

Photos/JPEG movies: PowerPC G4 (1 GHz or better), G5, Intel Core, or Xeon series

H.264 movies (playback): PowerPC G5 Dual or Core Duo, 2 GHz or better

H.264 movies (editing): 2.6 GHz or better Core 2 Duo OS Mac OS X version 10.5.8, 10.6.8, or 10.7.2

RAM 512 MB or more (2 GB or more recommended)

Hard-disk space A minimum of 500 MB available on the startup disk (1 GB or more recommended)

Monitor Resolution: 1024 768 pixels (XGA) or more (1280 1024

pixels (SXGA) or more recommended) Color: 24-bit color (millions of colors) or more

AMotion Snapshots ViewNX 2 is required to view Motion Snapshots on a computer.

52

n

Storage If the camera will not be used for an extended period, remove the battery and store it in a cool, dry area with the terminal cover in place. To prevent mold or mildew, store the camera in a dry, well-ventilated area. Do not store your camera with naphtha or camphor moth balls or in locations that: are poorly ventilated or subject to humidities of over 60% are next to equipment that produces strong electromagnetic

fields, such as televisions or radios are exposed to temperatures above 50 C (122 F) or below 10 C

(14 F)

Cleaning

Do not use alcohol, thinner, or other volatile chemicals.

Storage and Cleaning

Camera body

Use a blower to remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or sea- side, wipe off sand or salt with a cloth lightly dampened in distilled water and dry thoroughly. Important: Dust or other foreign matter inside the camera may cause damage not cov- ered under warranty.

Lens, viewfinder

These elements are easily damaged. Remove dust and lint with a blower. If using an aerosol blower, keep the can ver- tical to prevent the discharge of liquid. To remove finger- prints and other stains, apply a small amount of lens cleaner to a soft cloth and clean with care.

Monitor

Remove dust and lint with a blower. When removing finger- prints and other stains, wipe the surface lightly with a soft cloth or chamois leather. Do not apply pressure, as this could result in damage or malfunction.

53

n

Do not drop: The product may malfunc- tion if subjected to strong shocks or vibration.

Keep dry: This product is not water- p roof, and may mal func t ion i f immersed in water or exposed to high levels of humidity. Rusting of the internal mechanism can cause irreparable damage.

Avoid sudden changes in temperature: Sud- den changes in temperature, such as those that occur when entering or leaving a heated building on a cold day, can cause condensation inside the device. To prevent condensation, place the device in a carrying case or plastic bag before exposing it to sud- den changes in temperature.

Keep away from strong magnetic fields: Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the displays, damage data stored on the memory card, or affect the products internal circuitry.

Do not leave the lens pointed at the sun: Do not leave the lens pointed at the sun or other strong light source for an extended period. Intense light may cause the image sensor to deteriorate or produce a white blur effect in pho- tographs.

Keep the lens mount covered: Be sure to attach the body cap if the camera is without a lens.

Do not touch the low-pass filter: The low- pass filter covering the image sensor is easily damaged. Under no circum- stances should you exert pressure on the filter, poke it with cleaning tools, or subject it to powerful air currents from a blower. These actions could scratch or otherwise damage the fil- ter.

Turn the product off before removing or dis- connecting the power source : Do not unplug the product or remove the battery while the product is on or while images are being recorded or deleted. Forcibly cutting power in these circumstances could result in loss of data or in damage to product memory or internal circuitry. To pre- vent an accidental interruption of power, avoid carrying the product from one location to another while the AC adapter is connected.

Caring for the Camera and Battery: Cautions

54

n

Cleaning: When cleaning the camera body, use a blower to gently remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off any sand or salt using a cloth lightly dampened in pure water and then dry the camera thoroughly.

The lens is easily damaged. Dust and lint should be gently removed with a blower. When using an aerosol blower, keep the can vertical to pre- vent discharge of liquid. To remove fingerprints and other stains from the lens, apply a small amount of lens cleaner to a soft cloth and wipe the lens carefully.

Storage: To prevent mold or mildew, store the camera in a dry, well-venti- lated area. If you are using an AC adapter, unplug the adapter to prevent fire. If the product will not be used for an extended period, remove the bat- tery to prevent leakage and store the camera in a plastic bag containing a desiccant. Do not, however, store the camera case in a plastic bag, as this may cause the material to deteriorate. Note that desiccant gradually loses its capacity to absorb moisture and should be replaced at regular intervals.

To prevent mold or mildew, take the camera out of storage at least once a month. Turn the camera on and release the shutter a few times before putting it away.

Store the battery in a cool, dry place. Replace the terminal cover before putting the battery away.

Notes on the monitor and viewfinder: These d i s p l a y s a r e c o n s t r u c t e d w i t h extremely high precision; at least 99.99% of pixels are effective, with no more than 0.01% being missing or defective. Hence while these displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is not a malfunction and has no effect on images recorded with the device.

Images in the monitor may be diffi- cult to see in a bright light.

Do not apply pressure to the displays, as this could cause damage or mal- function. Dust or lint on the displays can be removed with a blower. Stains can be removed by wiping lightly with a soft cloth or chamois leather. Should the monitor or viewfinder break, care should be taken to avoid injury from broken glass and to pre- vent liquid crystal from the display touching the skin or entering the eyes and mouth.

Moir: Moir is an interference pattern created by the interaction of an image containing a regular, repeating grid, such as the pattern of weave in cloth or windows in a building, with the camera image sensor grid. In some cases, it may appear in the form of lines. If you notice moir in your photographs, try changing the dis- tance to the subject, zooming in and out, or changing the angle between the subject and the camera.

55

n

Lines: Noise in the form of lines may in rare cases appear in pictures of extremely bright or backlit subjects.

B a t t e r i e s : Batter ies may leak or explode if improperly handled. Observe the following precautions when handling batteries: Use only batteries approved for use

in this equipment. Do not expose the battery to flame

or excessive heat. Keep the battery terminals clean. Turn the product off before replac-

ing the battery. Remove the battery from the cam-

era or charger when not in use and replace the terminal cover. These devices draw minute amounts of charge even when off and could draw the battery down to the point that it will no longer function. If the battery will not be used for some time, insert it in the camera and run it flat before removing it and storing it in a location with an ambient tem- perature of 15 to 25 C (59 to 77 F; avoid hot or extremely cold loca- tions). Repeat this process at least once every six months.

Turning the camera on and off repeatedly when the battery is fully discharged will shorten battery life. Batteries that have been fully dis- charged must be charged before use.

The internal temperature of the bat- tery may rise while the battery is in use. Attempting to charge the bat- tery while the internal temperature is elevated will impair battery per- formance, and the battery may not charge or charge only partially. Wait for the battery to cool before charg- ing.

Continuing to charge the battery after it is fully charged can impair battery performance.

A marked drop in the time a fully charged battery retains its charge when used at room temperature indicates that it requires replace- ment. Purchase a new EN-EL15 bat- tery.

Charge the battery before use. When tak ing photographs on important occasions, ready a spare EN-EL15 battery and keep it fully charged. Depending on your loca- tion, it may be difficult to purchase replacement batteries on short notice. Note that on cold days, the capacity of batter ies tends to decrease. Be sure the battery is fully charged before taking photographs outside in cold weather. Keep a spare battery in a warm place and exchange the two as necessary. Once warmed, a cold battery may recover some of its charge.

Used batteries are a valuable resource; recycle in accord with local regulations.

56

n

Do not use the battery at ambient temperatures below 0 C/32 F or ab ove 40 C/104 F; fa i lure to observe this precaution could dam- age the battery or impair its perfor- mance. Capacity may be reduced and charging times may increase at battery temperatures from 0 C/ 32 F to 15 C/59 F and from 45 C/ 113 F to 60 C/140 F; the battery will not charge if its temperature is below 0 C/32 F or above 60 C/ 140 F.

The battery charger: Charge the battery at ambient temperatures between 5 C/41 F and 35 C/95 F. If the CHARGE lamp flickers (i.e., flashes about eight times a second) during charging, confirm that the tempera- ture is in the correct range and then unplug the charger and remove and reinsert the battery. If the problem persists, cease use immediately and take battery and charger to your retailer or a Nikon-authorized service representative.

Do not move the charger or touch the battery during charging. Failure to observe this precaution could in very rare instances result in the charger showing that charging is complete when the battery is only partially charged. Remove and reinsert the battery to begin charging again.

The supplied power cable and AC wall adapter are for use with the MH- 25 only. Use the charger with compat- ible batteries only. Unplug when not in use.

Memory Cards The camera stores pictures on

Secure Digital (SD) memory cards (available separately; 0 47).

Memory cards may be hot after use. Observe due caution when remov- ing memory cards from the camera.

Turn the power off before inserting or removing memory cards. Do not remove memory cards from the camera, turn the camera off, or remove or disconnect the power source during formatting or while data are being recorded, deleted, or copied to a computer. Failure to observe these precautions could result in loss of data or in damage to the camera or card.

Do not touch the card terminals with your fingers or metal objects.

Do not bend, drop, or subject to strong physical shocks.

Do not apply force to the card cas- ing. Failure to observe this precau- tion could damage the card.

Do not expose to water, heat, high levels of humidity, or direct sunlight.

57

n

A Image Sensor Cleaning The cameras image sensor is fitted with a low-pass filter to prevent moir. Each time it is turned on or off, the camera vibrates the low-pass filter to remove dust (note that operating camera controls before clean- ing is complete interrupts this process, and that image sensor cleaning may be temporarily disabled if the camera is turned on and off several times in succession). Dust not removed by this method may appear in images recorded with the camera, in which case you should have the filter cleaned by Nikon-authorized service personnel.

D Servicing the Camera and Accessories The camera is a precision device and requires regular servicing. Nikon recommends that the camera be inspected by the original retailer or Nikon-authorized service representative once every one to two years, and that it be serviced once every three to five years (note that fees apply to these services). Frequent inspection and servicing are particu- larly recommended if the camera is used professionally. Any accesso- ries regularly used with the camera, such as lenses or optional flash units, should be included when the camera is inspected or serviced.

58

n

If the camera fails to function as expected, check this list of com- mon problems before consulting your retailer or Nikon repre- sentative.

Display

Troubleshooting

The displays are off: The camera is off or the battery is exhausted. The monitor has been turned off. Press the $ button to turn the

monitor on (0 6). An object has come close to the eye sensor, turning the viewfinder on

and the monitor off (0 7). The displays have turned off automatically to save power. The displays

can be reactivated by operating buttons or the mode dial. The camera is connected to a computer or television. The displays turn off without warning: The battery is low. The displays have turned off automatically to save power. The displays

can be reactivated by operating buttons or the mode dial. The cameras internal temperature is high. Wait for the camera to cool

before turning it on again. The camera is unresponsive: See A Note on Electronically-Controlled Cam- eras, below. The viewfinder is out of focus: Focus the viewfinder using the diopter adjust- ment control (0 7). Indicators are not displayed: Press the $ button (0 6).

A A Note on Electronically-Controlled Cameras In extremely rare instances, the display may not respond as expected and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, taking care to avoid burns, and turn the camera on again, or, if you are using an AC adapter (available sepa- rately), disconnect and reconnect the adapter and turn the camera on again. If the problem persists after the battery has been removed and replaced, contact your retailer or Nikon-authorized service representa- tive.

59

n

Shooting (All Exposure Modes)

Movies

The camera takes time to turn on: Delete files or format the memory card. The shutter-release is disabled: The battery is exhausted. The memory card is locked or full. The camera is not in focus. You are currently filming a slow motion movie. No photo taken when remote control shutter-release button is pressed: Replace battery in remote control. Choose a remote control mode. The remote control standby timer has expired (0 42). The remote is not pointed at the camera or the infrared receiver is not

visible. The remote is too far from the camera (0 35). Bright light is interfering with remote. Smudges appear in photographs: Clean the front and rear lens elements Flicker or banding appears in movies or in the displays: Choose a Flicker reduc- tion setting that matches the local AC power supply (0 42). Optional flash units do not fire: The camera is in Smart Photo Selector or Motion Snapshot mode, or is recording a movie, or Electronic (Hi) is selected for Shutter type (0 13). Menu items are unavailable: Some options are only available in particular shooting or exposure modes or when a flash or GPS unit is attached (0 44, 45).

Cannot record movies: The movie-record button can not be used to record movies in Smart Photo Selector mode or Motion Snapshot mode. No sound is recorded for movies: Microphone off is selected for Movie sound options > Microphone

(0 41). Live audio is not recorded with slow-motion movies (0 25) or Motion

Snapshots (0 30).

60

n

Playback

Miscellaneous

Tall (portrait) orientation photos are displayed in wide (landscape) orientation: Select On for Rotate tall (0 40). The photos were taken with Auto image rotation off (0 42). Camera was pointed up or down when the photo was taken. Photo is displayed in image review. Cannot hear movie sound: Press W up to raise the volume. If the camera is connected to a televi-

sion, use the controls for the TV to adjust the volume. Live audio is not recorded with slow-motion movies (0 25) or Motion

Snapshots (0 30). Cannot delete images: Remove protection from the files before deletion. The memory card is locked.

The date of recording is not correct: Set the camera clock. Menu items are unavailable: Some options are only available at particular settings or when a memory card is inserted (0 39).

61

n

This section lists the error messages that appear in the display.

Error Messages

Message Solution

Rotate the zoom ring to extend the lens.

A lens with a retractable lens barrel button is attached with the lens barrel retracted. Press the retractable lens barrel button and rotate the zoom ring to extend the lens.

Check lens. Pictures can only be taken when a lens is attached.

Attach a lens.

Start-up error. Turn the camera off and then on again.

Turn the camera off, remove and replace the battery, and then turn the camera on.

The clock has been reset. Set the camera clock.

No memory card. Turn the camera off and confirm that the card is correctly inserted.

This memory card cannot be used. Card may be damaged; insert a different card.

Use an approved card (0 47). Format the card (0 5). If the problem per-

sists, the card may be damaged. Contact a Nikon-authorized service representative.

Insert a new memory card. This memory card is not formatted. Format the memory card?

Select Yes to format the card, or turn the cam- era off and insert another memory card.

Memory card is locked (write protected).

Turn the camera off and slide the card write- protect switch to the write position.

Memory card is full.

You may be able to record additional images if you reduce image quality or size.

Delete unwanted images. Insert another memory card.

62

n

Cannot create additional folders on memory card.

If the current folder is numbered 999 and contains either 999 photographs or a photo- graph numbered 9999, the shutter-release button will be disabled and no further pho- tographs can be taken. Choose Yes for Reset file numbering (0 42) and then either for- mat the current memory card (0 5) or insert a new memory card.

The movie-record button can not be used in this mode.

The movie-record button can not be used in Smart Photo Selector or Motion Snapshot modes.

Stills can not be taken when slow motion is selected.

The shutter-release button can not be used to take photographs while a slow-motion movie is being recorded (0 24).

The capture illuminator has been used consecutively for the maximum time and has turned off.

The capture illuminator on the optional SB-N5 flash unit turns off automatically after extended use. Remove your finger from the shutter-release button for a short period.

Hi Lower ISO sensitivity. Choose a faster shutter speed or smaller

aperture (higher f-number).

Lo

Raise ISO sensitivity. Use an optional flash unit. Choose a slower shutter speed or larger

aperture (lower f-number). The cameras internal temperature is high. The camera will now turn off.

Wait for the camera to cool.

Memory card contains no images.

To view pictures, insert a memory card con- taining images.

Cannot display this file. The file has been created or modified on a computer or different make of camera, or is corrupt.Cannot select this file.

Message Solution

63

n

Nikon 1 V1 Digital Camera

Specifications

Type Type Digital camera with interchangeable lenses Lens mount Nikon 1 mount Effective angle of view Approx. 2.7 lens focal length (35 mm format

equivalent); Nikon CX format

Effective pixels 10.1 million

Image sensor Image sensor 13.2 mm 8.8 mm CMOS sensor Dust-reduction system Image sensor cleaning

Storage Image size (pixels) Still images (still image and Smart Photo Selector modes,

aspect ratio 3 : 2) 3,872 2,592 2,896 1,944 1,936 1,296

Still images (movie mode, aspect ratio 16 : 9) 3,840 2,160 (1080/60i) 1,920 1,080 (1080/30p) 1,280 720 (720/60p)

Still images (Motion Snapshot mode, aspect ratio 16 : 9) 3,840 2,160

File format NEF (RAW): 12-bit, compressed JPEG: JPEG-Baseline compliant with fine (approx.

1 : 4), normal (approx. 1 : 8), or basic (approx. 1 : 16) compression

NEF (RAW) + JPEG: Single photograph recorded in both NEF (RAW) and JPEG formats

Picture Control system Standard, Neutral, Vivid, Monochrome, Portrait, Landscape; selected Picture Control can be mod- ified; storage for custom Picture Controls

Media SD (Secure Digital), SDHC, and SDXC memory cards File system DCF (Design Rule for Camera File System) 2.0, DPOF (Digi-

tal Print Order Format), Exif (Exchangeable Image File Format for Digital Still Cameras) 2.3, PictBridge

64

n

Electronic viewfinder Electronic viewfinder 0.47-in., approx. 1440k-dot color TFT LCD view-

finder with diopter control and brightness adjust- ment

Frame coverage Approx. 100% horizontal and 100% vertical Eyepoint 17 mm (1.0 m1; from center surface of view-

finder eyepiece lens) Diopter adjustment 3+1 m1

Eye sensor Camera switches to viewfinder display when it detects that viewfinder is in use

Shooting modes C still image (3 : 2), y Smart Photo Selector (3 : 2), 1 movie (HD 16 : 9, slow motion 8 : 3), z Motion Snapshot (16 : 9)

Shutter Type Electronically-controlled vertical-travel focal-

plane mechanical shutter; electronic shutter Speed Mechanical shutter: 1/4,000 30 s in steps of 1/3 EV;

Bulb; Time (requires optional ML-L3 remote control) Electronic shutter: 1/16,000 30 s in steps of 1/3 EV;

Bulb; Time (requires optional ML-L3 remote control) Flash sync speed Mechanical shutter: Synchronizes with shutter at

X=1/250 s or slower Electronic shutter: Synchronizes with shutter at

X=1/60 s or slower

Release Mode Single frame, continuous

Mechanical, Electronic, Electronic (Hi) Self-timer, delayed remote, quick-response

remote, interval timer shooting Frame advance rate Electronic (Hi): Approx. 10, 30, or 60 fps

Other modes: Up to 5 fps (single AF or manual focus, S Shutter-priority auto or M Manual exposure mode, shutter speed 1/250 s or faster, and other settings at default values)

Self-timer 2 s, 5 s, 10 s Remote control modes Delayed remote (2 s); quick-response remote

65

n

Exposure Metering TTL metering using image sensor Metering method Matrix

Center-weighted: Meters 4.5 mm circle in center of frame

Spot: Meters 2 mm circle centered on selected focus area

Mode Programmed auto with flexible program; shutter- priority auto; aperture-priority auto; manual; scene auto selector

Exposure compensation 3+3 EV in increments of 1/3 EV Exposure lock Luminosity locked at metered value with A

(AE-L/AF-L) button ISO sensitivity (Recommended Exposure Index)

ISO 1003200 in steps of 1 EV. Can also be set to approx. 1 EV (ISO 6400 equivalent) above ISO 3200; auto ISO sensitivity control (ISO 1003200, 100800, 100400) available

Active D-Lighting On, off

Focus Autofocus Hybrid autofocus (phase detection/contrast-

detect AF); AF-assist illuminator Lens servo Autofocus (AF): Single AF (AF-S); continuous AF

(AF-C); auto AF-S/AF-C selection (AF-A); full- time AF (AF-F)

Manual focus (MF) AF-area mode Single-point, auto-area, subject tracking

66

n

Focus Focus area Single-point AF: 135 focus areas; the center 73

areas support phase-detection AF Auto-area AF: 41 focus areas

Focus lock Focus can be locked by pressing shutter-release button halfway (single AF) or by pressing A (AE-L/AF-L) button

Face-priority AF On, off

Flash Control i-TTL flash control using image sensor available

with optional SB-N5 flash unit Mode Fill flash, slow sync, red-eye reduction, slow sync

with red-eye reduction, rear-curtain sync, rear curtain with slow sync

Flash compensation 3+1 EV in increments of 1/3 EV Flash-ready indicator Lights when optional flash unit is fully charged

White balance Auto, incandescent, fluorescent, direct sunlight, flash, cloudy, shade, preset manual, all except preset manual with fine tuning

Movie Metering TTL metering using image sensor Metering method Matrix

Center-weighted: Meters 4.5 mm circle in center of frame

Spot: Meters 2 mm circle centered on selected focus area

67

n

Movie Frame size (pixels)/ recording rate

HD movies 1,920 1,080/60i (59.94 fields/s *) 1,920 1,080/30p (29.97 fps) 1,280 720/60p (59.94 fps)

Slow-motion movies 640 240/400 fps (plays at 30p/29.97 fps) 320 120/1,200 fps (plays at 30p/29.97 fps)

Movies recorded in still image mode 1,072 720/60p (59.94 fps)

Motion Snapshot 1,920 1,080/60p (59.94 fps) (plays at 24p/23.976 fps)

File format MOV Video compression H.264/MPEG-4 Advanced Video Coding Audio recording format AAC Audio recording device Built-in or optional external ME-1 stereo micro-

phone; sensitivity adjustable * Sensor output is about 60 fps.

Monitor 7.5 cm/3-in., approx. 921k-dot, TFT LCD with brightness adjustment

Playback Full-frame and thumbnail (4, 9, or 72 images or calendar) playback with playback zoom, movie playback, slide show, histogram display, auto image rotation, and rating option

Interface USB Hi-Speed USB Video output NTSC, PAL HDMI output Type C mini-pin HDMI connector Multi accessory port Used for designated accessories Audio input Stereo mini-pin jack (3.5 mm diameter)

Supported languages Arabic, Chinese (Simplified and Traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portu- guese, Romanian, Russian, Spanish, Swedish, Thai, Turkish, Ukrainian

68

n

Unless otherwise stated, all figures are for a camera with a fully-charged bat- tery operating at an ambient temperature of 20 C (68 F).

Nikon reserves the right to change the specifications of the hardware and software described in this manual at any time and without prior notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain.

Power source Battery One rechargeable Li-ion EN-EL15 battery AC adapter EH-5b AC adapter; requires EP-5B power connec-

tor (available separately)

Tripod socket 1/4-in. (ISO 1222)

Dimensions/weight Dimensions (W H D) Approx. 113 76 43.5 mm/4.4 3 1.7 in.,

excluding projections; thickness of body (from mount to monitor) is 36 mm/1.4 in.

Weight Approx. 383 g/13.5 oz with battery and memory card but without body cap; approx. 294 g/10.4 oz (camera body only)

Operating environment Temperature 040 C/+32104 F Humidity Less than 85% (no condensation)

69

n

MH-25 battery charger Rated input (in North America)

AC 120 V, 60 Hz, 0.2 A

Rated input (in other regions)

AC 100240 V, 50/60 Hz, 0.120.23 A

Rated output DC 8.4 V/1.2 A Supported batteries Nikon EN-EL15 rechargeable Li-ion batteries Charging time Approx. 2 hours and 35 minutes at an ambient

temperature of 25 C/77 F when no charge remains

Operating temperature 040 C/+32104 F Dimensions (W H D) Approx. 91.5 33.5 71 mm/3.6 1.3 2.8 in.,

excluding projections Length of cord Approx. 1.8 m/6 ft (U.S.A. and Canada) or 1.5 m/

4.9 ft (other countries) Weight Approx. 110 g/3.9 oz, excluding power cable and

AC wall adapter

EN-EL15 rechargeable Li-ion battery Type Rechargeable lithium-ion battery Rated capacity 7.0 V, 1,900 mAh Operating temperature 040 C/+32104 F Dimensions (W H D) Approx. 40 56 20.5 mm/1.6 2.2 0.8 in. Weight Approx. 88 g/3.1 oz, excluding terminal cover

70

n

Specifications subject to change without notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain.

Trademark Information Macintosh, Mac OS, and QuickTime are registered trademarks of Apple Inc. in the United States and/or other countries. Microsoft, Windows, and Windows Vista are either registered trademarks, or trademarks of Microsoft Corpora- tion in the United States and/or other countries. The PictBridge logo is a trademark. The SD, SDHC, and SDXC logos are trademarks of SD-3C, LLC. HDMI, the logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respec- tive holders.

1 NIKKOR VR 10 30 mm f/3.5 5.6 Type 1 mount lens Focal length 1030 mm Maximum aperture f/3.55.6 Construction 12 elements in 9 groups (including 3 aspherical elements) Angle of view 7729 40 Vibration reduction Lens shift using voice coil motors (VCMs) Minimum focus distance 0.2 m/0.7 ft from focal plane at all zoom positions Diaphragm blades 7 (rounded diaphragm opening) Diaphragm Fully automatic Aperture range 10 mm focal length: f/3.516

30 mm focal length: f/5.616 Filter-attachment size 40.5 mm (P = 0.5 mm) Dimensions Approx. 57.5 mm diameter 42 mm (distance from

camera lens mount flange when lens is retracted) Weight Approx. 115 g/4.1 oz

71

n

Battery Life The number of shots that can be taken with fully-charged batter- ies varies with the condition of the battery, temperature, such factors as the use of GPS devices or other accessories, the inter- val between shots, and the length of time menus are displayed. Sample figures for EN-EL15 (1900 mAh) batteries are given below. Still images: Approximately 400, or 350 with SB-N5 Movies: Approximately 120 minutes of HD footage at 1080/60i

Values for still images measured at 25 C/77 F with a fully- charged EN-EL15 battery, a 1 NIKKOR VR 10-30mm f/3.5-5.6 lens, and a 16 GB Toshiba R95 W80MB/s UHS-I SDHC card according to the CIPA standard under the following test condi- tions: NORMAL-quality photographs taken at intervals of 30 s (measurements for the SB-N5 are made using the flash for every other shot) with the camera turned off and then on after every ten shots.

The following can reduce battery life: Keeping the shutter-release button pressed halfway Repeated autofocus operations Taking NEF (RAW) photographs Slow shutter speeds Using optional flash or GPS units Using vibration reduction mode with VR lenses

To ensure that you get the most from rechargeable Nikon EN-EL15 batteries: Keep the battery contacts clean. Soiled contacts can reduce

battery performance. Use batteries immediately after charging. Batteries will lose

their charge if left unused.

72

n

Symbols C (Still image mode) ......................... 8 y (Smart Photo Selector mode) .16 1 (Movie mode) ................................22 z (Motion Snapshot mode) ..........30 h (Scene auto selector) .................. 8 c (Portrait) ........................................... 8 d (Landscape) ..................................... 8 e (Close up) ......................................... 8 f (Night portrait) ............................... 8 Z (Auto) ................................................ 8 G (menu) button ........................38 K (playback) button ..........14, 19, 33 O (delete) button ..........15, 20, 28, 33 $ (display) button ........................ 6 & (feature) button ..............13, 24, 32 J (OK) button ................. 3, 19, 27, 33 E (self-timer) ......................................34 W (playback zoom/thumbnail) control ..........................................14, 27 " (delayed remote) .......................34 # (quick response remote) .............34

A AC adapter ....................................44, 48 Accessories ..........................................43 Auto power off ...................................12 Automatic scene selection ............... 8

B Background track ..............................33 Battery ....................................... 5, 44, 69 Best shot ........................................16, 19 Body cap .......................................... 2, 45 Buffering ........................................17, 31

C Capture NX 2 .......................................45 Clean image sensor ..........................57

D Delayed remote ................................. 34 Delete ............................... 15, 20, 28, 33 Detailed display ............................... 4, 6 Detailed photo information .............6 Diopter adjustment control .............7

E Electronic ............................................. 13 Electronic (Hi) ..................................... 13 Electronic shutter .............................. 13 Electronic viewfinder ..........................7 Eye sensor ...............................................7

F Face-priority AF ................................. 11 Flash ....................................................... 44 Flicker reduction ............................... 12 Focus area ............................................ 10 Focusing the viewfinder ....................7 Format ......................................................5 Format memory card ..........................5 Full-frame playback ............ 14, 19, 33

G GP-N100 ............................................... 45

H HD Movies .................................... 22, 24

I Infrared receiver ....................... 2, 3, 35

L Landscape ..............................................8 Lens ................................... 11, 12, 43, 70

M Mechanical .......................................... 13 Mechanical shutter ........................... 13 Memory buffer ................................... 10 Memory card ..................................5, 47

Index

73

n

Microphone .................................. 23, 45 Mode dial ............................................... 3 Monitor ...............................................4, 6 Motion Snapshot mode .................. 30 Movie mode ........................................ 22 Movie type ...........................................24 Movie-record button ......... 13, 23, 26 Movies ............................................ 13, 22 Multi selector ..................................3, 39

N Night portrait ........................................ 8

P Playback .......................... 14, 19, 27, 33 Playback menu ...................................40 Portrait .................................................... 8 Power connector ........................ 44, 48 Power switch ......................................... 5 Press the shutter-release button all the way down ...................................10

Press the shutter-release button halfway .................................. 10, 17, 31

Q Quick response remote ................... 34

R Remote control ........................... 34, 45 Retractable lens barrel button ..... 11

S Scene auto selector ............................ 8 SD card ..............................................5, 47 Self-timer .............................................. 34 Setup menu ......................................... 42 Shooting menu .................................. 40 Short Movie Creator ......................... 50 Shutter type ........................................ 13 Shutter-release button ...... 10, 17, 31 Simplified display ................................ 6 Slow motion ........................................ 25 Smart Photo Selector mode ..........16 Software ........................................ 45, 50

Still image mode ..................................8 System requirements ...................... 50

T Temperature warnings ...................... ix Theme ................................................... 32 Tripod mounting spacer .......... 36, 46

V Viewfinder ..............................................7 ViewNX 2 .............................................. 51 Volume ................................................. 27

Z Zoom ring ............................................ 12

74

n

No reproduction in any form of this manual, in whole o

Manualsnet FAQs

If you want to find out how the 1 V1 Nikon works, you can view and download the Nikon 1 V1 v2 User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Nikon 1 V1 as well as other Nikon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Nikon 1 V1. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Nikon 1 V1 v2 User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Nikon 1 V1 v2 User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Nikon 1 V1 v2 User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Nikon 1 V1 v2 User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Nikon 1 V1 v2 User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.