Contents

Nikon 1 AW1 User's Manual PDF

1 of 144
1 of 144

Summary of Content for Nikon 1 AW1 User's Manual PDF

Printed in Singapore SB3I01(11)

6MVA6011-01

No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.

DIGITAL CAMERA

User's Manual

En

Getting the Most from Your Camera .........................................3 Product Documentation ..............................................................6 For Your Safety...............................................................................7 Shock-, Water-, and Dust-Proofing ..........................................10

Shock-Proofing .....................................................................................10 Water- and Dust-Proofing.................................................................10

Important: Waterproof Lenses ..................................................11 Precautions: Shock-Proofing............................................................11 Precautions: Water- and Dust-Proofing .......................................11 Operating Environment.....................................................................13

Important: Location Data (GPS/GLONASS) .............................14 Notices...........................................................................................15

Introduction 20

Package Contents........................................................................20 Parts of the Camera.....................................................................21 First Steps......................................................................................31

Taking and Viewing Photographs 40

Point-and-Shoot Photography (Auto Mode) .........................40 Viewing Photographs .........................................................................44 Deleting Pictures ..................................................................................45 Live Image Control...............................................................................47

Choosing a Creative Mode.........................................................49 Choosing a Mode That Matches the Subject or Situation.....50

Underwater (4 (5, 6))..............................................................50 Night landscape (j) ....................................................................50 Night portrait (o)..........................................................................51 Backlighting (m) ............................................................................51 Easy panorama (p)......................................................................51 Soft (q) ..............................................................................................51 Miniature effect (r) .....................................................................51 Selective color (s)........................................................................51

Table of Contents

1

Taking Photos in P, S, A, and M Modes........................................... 52 Backlighting........................................................................................... 57 Easy Panorama...................................................................................... 58

Underwater Photography 61

Important: Precautions............................................................... 61 Before Using the Camera Underwater .................................... 62

The Final Check .................................................................................... 64 Taking Pictures Underwater ..................................................... 65 Tips and Tricks for Underwater Photography ....................... 67

Auto Distortion Control..................................................................... 67 The Built-in Flash.................................................................................. 67 The Depth Gauge ................................................................................ 68

After Using the Camera Underwater....................................... 71 The O-Ring ............................................................................................. 73

Recording and Viewing Movies 77

Recording HD Movies................................................................. 78 Taking Photographs During HD Movie Recording.................. 80 Viewing Movies .................................................................................... 81 Deleting Movies ................................................................................... 82

Recording Slow-Motion Movies ............................................... 83

More on Photography 87

Continuous Mode........................................................................87 Self-Timer Modes ........................................................................89 The Built-in Flash......................................................................... 91 The C (Action) Button ............................................................... 95

Shooting: Choosing a Shooting Mode......................................... 95 Playback: Scrolling Through Pictures ........................................... 96 Menus: Outdoor Display ................................................................... 97

2

Menu Options 98

Playback Menu Options ............................................................ 98 Shooting Menu Options............................................................ 99 Movie Menu Options .............................................................. 100 Image Processing Menu Options.......................................... 100 Setup Menu Options............................................................... 100

Connecting to a Computer 102

Installing the Supplied Software........................................... 102 System Requirements...................................................................... 103

Viewing and Editing Pictures on a Computer ..................... 105 Transferring Pictures ........................................................................ 105 Viewing Pictures ................................................................................ 107

Technical Notes 108

Optional Accessories ............................................................... 108 Non-Waterproof 1 NIKKOR Lenses.............................................. 110 Approved Memory Cards ............................................................... 113

Storage and Cleaning .............................................................. 114 Underwater Use................................................................................. 114 Storage.................................................................................................. 114 Cleaning................................................................................................ 114

Caring for the Camera and Battery: Cautions ..................... 115 Troubleshooting....................................................................... 119

Battery/Display................................................................................... 119 Shooting (All Modes) ....................................................................... 119 Movies ................................................................................................... 120 Playback................................................................................................ 120 Miscellaneous ..................................................................................... 120

Error Messages.......................................................................... 121 Specifications ............................................................................ 123

Nikon 1 AW1 Digital Camera......................................................... 123 Battery Life........................................................................................... 135

Index ........................................................................................... 136

3

Getting the Most from Your Camera

Take photos with the shutter-release button. Photos can be taken in any mode by pressing the shutter- release button. See page 27 for more information.

Shutter-release button

Shoot movies with the movie-record button. Movies can be recorded by pressing the movie-record but- ton in auto (0 40), creative (0 49), and advanced movie (0 77) modes.

Movie-record button

4

Shoot underwater. Attach a special-purpose waterproof lens to take pictures at depths of up to 15 m (49 ft) for as long as 60 minutes at a time. See page 61 for more information. The camera offers the fol- lowing features that may come in handy during underwater photography:

Compensate for the blue cast in pic- tures taken under water (0 65).

Distortion control for underwater photographs and movies (0 67).

A built-in flash that can be used for additional l ighting under water (0 67).

Access altitude, depth, heading, virtual horizon, location data (GPS/GLONASS), and log options. When shooting in locations with a clear view of the sky, you can: Access a variety of information, including a virtual horizon

and your heading and altitude or depth (0 25). Record location data (0 101). Log your location or depth (0 101).

5

Thank you for your purchase of a Nikon digital camera. For a complete guide to using your digital camera, see the Reference Manual (0 6). To get the most from your camera, please be sure to read this Users Manual thoroughly and keep it where it will be read by all who use the product.

Camera Settings The explanations in this manual assume that default settings are used.

Symbols and Conventions To make it easier to find the information you need, the following sym- bols and conventions are used:

The lens generally used in this manual for illustrative purposes is a 1 NIKKOR AW 1127.5mm f/3.55.6.

D This icon marks cautions; information that should be read before use to prevent damage to the camera.

A This icon marks notes; information that should be read before using the camera.

0 This icon marks references to other pages in this manual.

A For Your Safety Before using the camera for the first time, read the safety instructions in For Your Safety (0 79), on pages 1019, and in Caring for the Cam- era and Battery: Cautions (0 115).

6

The following documentation is supplied with the camera.

The Reference Manual can be viewed using Adobe Reader or Adobe Acrobat Reader 5.0 or later, available for free download from the Adobe website. 1 Start the computer and insert the reference manual CD. 2 Double-click the CD (Nikon 1 AW1) icon in Computer or My

Computer (Windows) or on the desktop (Mac OS). 3 Double-click the INDEX.pdf icon to display a language selec-

tion screen and click a language to display the Reference Man- ual.

Product Documentation

Users Manual (this manual)Describes how to take and view pictures.

Reference Manual (on CD)A complete guide to using your digital camera, included as a pdf file on the supplied Ref- erence Manual CD-ROM.

DIGITAL CAMERA

User's Manual

En

7

To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equip- ment. Keep these safety instructions where all those who use the product will read them.

The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol:

WARNINGS

For Your Safety

A This icon marks warnings. To prevent possible injury, read all warn- ings before using this Nikon product.

AKeep the sun out of the frame. Keep the sun well out of the frame when shooting backlit subjects. Sunlight focused into the camera when the sun is in or close to the frame could cause a fire.

ATurn off immediately in the event of mal- function. Should you notice smoke or an unusual smell coming from the equipment or AC adapter (available separately), unplug the AC adapter and remove the battery immediately, taking care to avoid burns. Continued operation could result in injury. After removing the battery, take the equip- ment to a Nikon-authorized service center for inspection.

ADo not use in the presence of flammable gas. Do not use electronic equipment in the presence of flammable gas, as this could result in explosion or fire.

AObserve caution in the presence of water or rain or when using the camera with wet hands. The camera can be used under- water and safely handled with wet hands only when the special-purpose waterproof lens is attached and the battery-chamber/memory card slot and connector covers are closed. Do not immerse in or expose to water or handle with wet hands unless these conditions are met. Failure to observe these precautions could result in damage to the product, fire, or elec- tric shock.

ADo not disassemble. Touching the prod- ucts internal parts could result in injury. In the event of malfunction, the product should be repaired only by a qualified technician. Should the product break open as the result of a fall or other accident, remove the bat- tery and/or AC adapter and then take the product to a Nikon-authorized service center for inspection.

8

AKeep out of reach of children. Failure to observe this precaution could result in injury. In addition, note that small parts constitute a choking hazard. Should a child swallow any part of this equipment, consult a physician immediately.

ABefore using the camera underwater, remove straps intended exclusively for use on land. The strap could become wrapped around your throat, causing suffocation or drowning.

ADo not place the strap around the neck of an infant or child. Placing the camera strap around the neck of an infant or child could result in strangulation.

AFollow the instructions of airline and hos- pital personnel. This camera transmits radio frequencies that could interfere with medical equipment or aircraft navigation. Disable the location data and all track log functions and dis- connect any wireless devices from the camera before boarding an air- craft, and turn the camera off during take off and landing. In medical facili- ties, follow staff instructions regard- ing the use of wireless devices and satellite navigation systems.

ADo not remain in contact with the camera, battery, or charger for extended periods while the devices are on or in use. Parts of the device become hot. Leaving the device in direct contact with the skin for extended periods may result in low-temperature burns.

ADo not leave the product where it will be exposed to extremely high temperatures, such as in an enclosed automobile or in direct sunlight. Failure to observe this precaution could cause damage or fire.

ADo not aim the flash at the operator of a motor vehicle. Failure to observe this precaution could result in accidents.

AObserve caution when using a flash. Using the camera with the flash in

close contact with the skin or other objects could cause burns.

Using a flash close to the subjects eyes could cause temporary visual impairment. The flash should be no less than one meter (3 ft 4 in.) from the subject. Particular care should be observed when photographing infants.

AAvoid contact with liquid crystal. Should the display break, care should be taken to avoid injury due to broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes or mouth.

ADo not carry tripods with a lens or camera attached. You could trip or acciden- tally strike others, resulting in injury.

9

AObserve proper precautions when handling b a t t e r i e s. Batteries may leak or explode if improperly handled. Observe the following precautions when handling batteries for use in this product: Use only batteries approved for use

in this equipment. Do not short or disassemble the

battery. Be sure the product is off before

replacing the battery.If you are using an AC adapter, be sure it is unplugged.

Do not attempt to insert the battery upside down or backwards.

Do not expose the battery to flame or to excessive heat.

Do not immerse in or expose to water.

Replace the terminal cover when transporting the battery.Do not transport or store the battery with metal objects such as necklaces or hairpins.

Batteries are prone to leakage when fully discharged.To avoid damage to the product, be sure to remove t h e b a t t e r y w h e n n o c h a r g e remains.

When the battery is not in use, attach the terminal cover and store in a cool, dry place.

The battery may be hot immedi- ately after use or when the product has been used on battery power for an extended period.Before remov- ing the battery turn the camera off and allow the battery to cool.

Discontinue use immediately should you notice any changes in the battery, such as discoloration or deformation.

AObserve proper precautions when handling the charger: Keep dry.Failure to observe this

precaution could result in fire or electric shock.

Do not short the charger terminals. Failure to observe this precaution could result in overheating and damage to the charger.

Dust on or near the metal parts of the plug should be removed with a dry cloth.Continued use could result in fire.

Do not go near the charger during thunderstorms. Failure to observe this precaution could result in elec- tric shock.

Do not handle the plug or charger with wet hands.Failure to observe this precaution could result in elec- tric shock.

Do not use with travel converters or adapters designed to convert from one voltage to another or with DC- to-AC inverters.Failure to observe this precaution could damage the product or cause overheating or fire.

AUse appropriate cables. When connect- ing cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose to maintain compliance with product regulations.

ACD-ROMs: CD-ROMs containing soft- ware or manuals should not be played back on audio CD equipment. Playing CD-ROMs on an audio CD player could cause hearing loss or damage the equipment.

10

The product conforms to the following standards:

Shock-Proofing The camera, with the special-purpose waterproof lens attached, has passed drop tests compliant 1 with MIL-STD-810F Method 516.5: Shock. 2 These in- house tests do not constitute a blanket guarantee of invulnerability to damage or destruction.

Water- and Dust-Proofing With the special-purpose waterproof lens attached, the camera complies with the JIS IP68 waterproofing standard, allowing it to be used at depths of up to 15 m (49 ft) for as long as 60 minutes at a time. 3 This is not a blanket guarantee that the product will be water- or dust-proof in all circumstances or invulnerable to damage or destruction.

1 Using a test method derived from MIL-STD-810F Method 516.5: Shock, the product is dropped from a height of 200 cm (6.6 ft) onto a plywood surface 5 cm (2 in.) thick. Exterior deformation and surface damage are not tested.

2 An American military test standard that involves dropping 5 samples at a time from a height of 122 cm (4 ft) to test the effect of impact on a total of 26 surfaces (12 edges, 8 corners, and 6 faces), with the requirement that the test be passed within a total of 5 samples (if a problem occurs during the test, the test is repeated with 5 new samples, with the requirement that the test be passed within a total of 5 samples).

3 This signifies that according to tests performed using Nikon methods, the product can be used at the specified water pressure for the specified period of time.

Shock-, Water-, and Dust-Proofing

11

The product is not guaranteed shock-, water-, or dust-proof if the special-purpose waterproof lens is not attached. Before using this product, be sure to read the following sections, together with the instructions in For Your Safety (0 79) and in Caring for the Camera and Battery: Cautions (0 115118). Before using the product underwa- ter, read the cautions in Underwater Photogra- phy (0 6176).

Precautions: Shock-Proofing Observe the following precautions when using the camera with special-purpose waterproof lenses: The product is not guaranteed shockproof if the

flash is raised. Do not intentionally subject the product to vio-

lent physical shocks, place it under heavy objects, or attempt to force it into bags or other spaces too small to contain it.

Do not expose the product to depths greater than 15 m (49 ft) or to rapids, waterfalls, or other water under high pressure.

Damage due to user error is not covered under warranty.

Precautions: Water- and Dust-Proofing Observe the following precautions when using the camera with special-pur- pose waterproof lenses: Apart from the special-purpose waterproof lens, the accessories supplied

with the camera are not waterproof. Special-purpose waterproof lenses are themselves waterproof only when attached to the camera.

The product is proof only against fresh water (such as pools, rivers, and lakes) and seawater. Do not take into hot springs or baths.

Do not expose to depths greater than 15 m (49 ft) or to rapids, waterfalls, water flowing at full force from a tap, or other water under high pressure. Failure to observe these precautions could expose the product to pressures high enough to cause water entry.

Do not leave immersed for more than 60 min- utes at a time.

Important: Waterproof Lenses

15 m

12

Internal parts will be damaged by water and dust. To prevent water entry, do not remove the lens, open the connector or battery-chamber/memory card slot cover, or operate the lens release button or the latches or security locks on the connector and battery-chamber/memory card slot covers with wet hands, when the camera is wet, or in locations exposed to spray, wind, sand or dust. Ensure that memory cards and batteries are dry before insertion. Should the product leak, cease use immediately, dry the camera and lens, and consult a Nikon-authorized service representative.

Water and other liquids on the lens O-ring seal or inside the connector and battery-chamber/memory card slot covers should be removed immediately with a soft, dry cloth. Other foreign matter should be removed from these surfaces with a blower, taking care to remove any small particles from the sides and corners of the watertight channels. Foreign matter on the camera body can be removed with a soft, dry cloth. Do not use soap, cleansers, or other chemicals, and be sure to remove suntan oil, sunblock, bath salts, detergent, soap, organic solvents, oil, alcohol, and the like immediately.

Do not leave the product for extended periods in locations that are exposed to freezing temperatures or temperatures over 50 C (122 F), such as in enclosed vehicles, on board boats, on the beach, in direct sunlight, or near heating equipment. Failure to observe this precaution may make the prod- uct vulnerable to water entry.

13

The product is not guaranteed waterproof if struck, dropped, or otherwise subjected to strong pressure or violent physical shocks or vibration. If the product does suffer a fall or other physical shock, take it to Nikon-authorized service personnel and have it tested to make sure that it is still waterproof. Note that a fee will be charged for this service.

Damage due to user error is not covered under warranty.

Operating Environment The camera and special-purpose waterproof lenses have been tested and approved for use at temperatures between 10 C and +40 C (+14 F to 104 F) on land and 0 C and +40 C (+32 F to 104 F) in water. Note the following precautions: Battery performance drops at low temperatures. Keep the camera warm, or

ready a spare battery and keep it in a warm location. At low temperatures, the monitor may not perform as expected immedi-

ately after the camera is turned on: for example, after-images may appear or the monitor may seem darker than normal.

In cold environments, remove any snow or rain immediately. Buttons, switches, and other camera controls may become difficult to operate if allowed to freeze, while sound quality may be affected if water is allowed to accumulate in the holes in the microphone and speaker covers.

Prolonged contact with cold metal can damage exposed skin. Wear gloves when handling the camera for extended periods at low temperatures.

Select a dry location when attaching or removing special-purpose water- proof lenses, and avoid leaving the camera with the body cap removed or the battery-chamber/memory slot or connector cover open or the lens with the rear cap removed in humid locations. Failure to observe these precau- tions could result in condensation forming inside the lens when the product is taken into the water. Condensation may also form inside the lens, monitor, or watertight channel if the product is exposed to rapid changes in temper- ature, such as occur when the product is taken into cold water from a hot shore location, into a warm room from a cold exterior, or the battery-cham- ber/memory card slot cover is opened or closed or lenses are attached or removed in a humid location. Such condensation will not cause malfunction or other damage, and should dissipate if the product is first taken to a loca- tion with a stable temperaturefree from heat, humidity, sand, and dust and then turned off and left with the battery and memory card removed and the battery-chamber/memory card slot and connector covers open until it has reached the ambient temperature. Consult Nikon-authorized ser- vice personnel should the condensation fail to dissipate.

14

Observe the following precautions when using the location data and track log features: Track logs: While Yes is selected for Location data > Record location data in

the setup menu, location data will be recorded with all pictures taken and the camera will continue to monitor location data even while off. Radio waves produced by the device may affect medical equipment and aircraft navigation systems; in situations in which the use of satellite navigation devices is restricted or prohibited, such as in hospitals or aircraft, end the current track log, select No for Record location data, and turn the camera off.

Sharing location data: Note that addresses and other personal information may be inferred from the location data stored in track logs or embedded in images. Exercise caution when sharing images and track logs or when post- ing them to the Internet or other locations where they can be viewed by third parties. See Disposing of Data Storage Devices (0 18) for information on erasing location data before disposing of the camera or memory cards.

Navigation: The position, altitude, depth, and other location data reported by the device are approximations only and are not intended for surveying or navigation. Be sure to take appropriate maps or other navigational devices with you when using the product during such outdoor activities as boating, diving, mountain climbing, or hiking.

Restrictions on use: The location data function may not perform as expected in some countries or regions, including (as of October, 2013) China and in the vicinity of the Chinese border. Some countries prohibit unauthorized use of satellite navigation and other location data devices; before travelling, check with your travel agent or the embassy or tourism board of the countries you will be visiting. Where use is prohibited, select No for Location data > Record location data.

Important: Location Data (GPS/GLONASS)

15

No part of the manuals included with this product may be repro- duced, transmitted, transcribed, stored in a retrieval system, or trans- lated into any language in any form, by any means, without Nikons prior written permission.

Nikon reserves the right to change the specifications of the hardware and software described in these manuals at any time and without prior notice.

Nikon will not be held liable for any damages resulting from the use of this product.

While every effort has been made to ensure that the information in these manuals is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representa- tive in your area (address provided separately).

Notice for Customers in Canada CAN ICES-3 B / NMB-3 B

Notice for Customers in Europe

This symbol indicates that electrical and electronic equipment is to be col- lected separately.

The following apply only to users in European countries: This product is designated for sepa-

rate collection at an appropriate col- lection point. Do not dispose of as household waste.

Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environ- ment that might result from incor- rect disposal.

For more information, contact the retailer or the local authorities in charge of waste management.

This symbol on the battery indicates that the battery is to be collected separately.

The following apply only to users in European countries: All batteries, whether marked with

this symbol or not, are designated for separate collection at an appro- priate collection point. Do not dis- pose of as household waste.

For more information, contact the retailer or the local authorities in charge of waste management.

Notices

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

16

Notice for Customers in the U.S. A.

Federal Communications Commission (FCC) Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable pro- tection against harmful interference in a residential installation. This equip- ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu- lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving

antenna. Increase the separation between the

equipment and receiver. Connect the equipment into an out-

let on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

CAUTIONS Modifications The FCC requires the user be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corpo- ration may void the users authority to operate the equipment.

Interface Cables Use the interface cables sold or pro- vided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules.

Notice for Customers in the State of California WARNING: Handling the cord on this product may expose you to lead, a chemical known to the State of Cali- fornia to cause birth defects or other reproductive harm. Wash hands after handling.

Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel.: 631-547-4200

The Battery Charger

IMPORTANT SAFETY INSTRUCTIONSSAVE THESE INSTRUCTIONS DANGERTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet if needed. This power unit is intended to be correctly oriented in a vertical or floor mount position.

17

Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that has been digitally cop- ied or reproduced by means of a scanner, digital camera, or other device may be punishable by law. Items prohibited by law from being copied

or reproduced Do not copy or reproduce paper money, coins, securities, govern- ment bonds, or local government bonds, even if such copies or repro- ductions are stamped Sample.

The copying or reproduction of paper money, coins, or securities which are circulated in a foreign country is prohibited.

Unless the prior permission of the government has been obtained, the copying or reproduction of unused postage stamps or post cards issued by the government is prohibited.

The copying or reproduction of stamps issued by the government and of certified documents stipu- lated by law is prohibited.

Cautions on certain copies and reproduc- tions The government has issued cautions on copies or reproductions of securities issued by private companies (shares, bills, checks, gift certificates, etc.), com- muter passes, or coupon tickets, except when a minimum of necessary copies are to be provided for business use by a company. Also, do not copy or repro- duce passports issued by the govern- ment, licenses issued by public agencies and private groups, ID cards, and tickets, such as passes and meal coupons.

Comply with copyright notices The copying or reproduction of copyrighted creative works such as books, music, paintings, woodcuts, prints, maps, drawings, movies, and p h o t o g r a p h s i s g o v e r n e d b y national and international copyright laws. Do not use this product for the purpose of making illegal copies or to infringe copyright laws.

18

Disposing of Data Storage Devices Please note that deleting images or formatting memory cards or other data storage devices does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using com- mercially available software, potentially resulting in the malicious use of per- sonal image data. Ensuring the privacy of such data is the users responsibility.

Before discarding a data storage device or transferring ownership to another person, select No for Location data > Record location data and erase all data using commercial deletion software, or format the device and then com- pletely refill it with images containing no private information (for example, pictures of empty sky). To remove track log data from the memory card, select Delete log and delete all logs. Care should be taken to avoid injury when physically destroying data storage devices.

AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (I) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (AVC VIDEO) AND/OR (II) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE http://www.mpegla.com

Temperature Warnings The camera may become warm to the touch during use; this is normal and does not indicate a malfunction. At high ambient temperatures, after extended periods of continuous use, or after several photographs have been taken in quick succession, a temperature warning may be displayed, follow- ing which the camera will turn off automatically to minimize damage to its internal circuits. Wait for the camera to cool before resuming use.

Use Only Nikon Brand Electronic Accessories Nikon cameras are designed to the highest standards and include complex electronic circuitry. Only Nikon brand electronic accessories (including charg- ers, batteries, AC adapters, and lens accessories) certified by Nikon specifically for use with this Nikon digital camera are engineered and proven to operate within the operational and safety requirements of this electronic circuitry.

The use of non-Nikon electronic accessories could damage the camera and may void your Nikon warranty. The use of third- party rechargeable Li-ion batteries not bearing the Nikon holo- graphic seal shown at right could interfere with normal operation of the cam- era or result in the batteries overheating, igniting, rupturing, or leaking.

For more information about Nikon brand accessories, contact a local autho- rized Nikon dealer.

19

DUse Only Nikon Brand Accessories Only Nikon brand accessories certified by Nikon specifically for use with your Nikon digital camera are engineered and proven to operate within its operational and safety requirements. THE USE OF NON-NIKON

ACCESSORIES COULD DAMAGE YOUR CAMERA AND MAY VOID YOUR NIKON WAR- RANTY.

D Servicing the Camera and Accessories The camera is a precision device and requires regular servicing. Nikon recommends that the camera be inspected by the original retailer or a Nikon-authorized service representative once a year, and that it be ser- viced once every three to five years (note that fees apply to these ser- vices). Frequent inspection and servicing are particularly recommended if the camera is used professionally. Any accessories regularly used with the camera, such as lenses, should be included when the camera is inspected or serviced.

ABefore Taking Important Pictures Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for dam- ages or lost profits that may result from product malfunction.

A Life-Long Learning As part of Nikons Life-Long Learning commitment to ongoing prod- uct support and education, continually-updated information is avail- able on-line at the following sites: For users in the U. S. A.: http://www.nikonusa.com/ For users in Europe and Africa: http://www.europe-nikon.com/support/ For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/

Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently-asked questions (FAQs), and general advice on digital imaging and photography. Additional information may be available from the Nikon representative in your area. For contact infor- mation, visit http://imaging.nikon.com/

s

20

s

Introduction

Confirm that the package contains the following items:

Memory cards are sold separately.

Package Contents

BF-N2000 body cap PA-N1000 O-ring protector

Nikon 1 AW1 digital camera (comes with WP-O2000 O-ring attached; check O-ring for damage before use)

EN-EL20 rechargeable Li-ion battery (with terminal cover)

MH-27 battery charger (AC wall adapter supplied in countries or regions where required; shape depends on country of sale)Lens (supplied only

if lens kit is purchased with camera; comes with front and rear lens caps)

AN-N1000 strap (intended exclusively for use on land) Silicon grease UC-E19 USB cable

ViewNX 2/Short Movie Creator CD Warranty Users Manual (this manual)

Reference manual CD (contains the Reference Manual)

21

s

Take a few moments to familiarize yourself with camera controls and displays. You may find it helpful to bookmark this section and refer to it as you read through the rest of the manual.

The Camera Body

Parts of the Camera

1 2 3 4 5

17

6

16 7

9

15

14

6 18

13 1112 10

19

20

21

8

1 Movie-record button ............77, 79, 84 2 Shutter-release button............... 42, 80 3 Power switch........................................36

Power lamp ..........................................36 4 Microphone 5 Focal plane mark (E) 6 Eyelet for camera strap......................31 7 Connector cover latch .....................105 8 Connector cover................................105 9 Connector cover security lock .......105

10 O-ring .................................... 33, 73, 108 11 Lens release button............................35

12 Dust shield ................................114, 115 13 Lens mount 14 Mounting mark ................................... 34 15 AF-assist illuminator

Self-timer lamp ................................... 89 Red-eye reduction lamp ................... 92

16 Body cap .............................................108 17 O-ring protector................................110 18 Built-in flash......................................... 91 19 USB connector...................................105 20 HDMI mini-pin connector 21 Watertight channel ............................ 62

22

s

The Camera Body (Continued)

* Camera does not support TA-N100 tripod mounting spacer.

3 13

19 18

1514 4 5

21

10 9 81112

6

16

17

21 2220

7

1 Flash pop-up button..........................91 2 Monitor .......................................... 24, 36 3 W (playback zoom out/thumbnail)

button ..................................................44 4 X (playback zoom in) button...........44 5 C (action) button ..............................95 6 Grip attachment screw 7 Battery-chamber/

memory card slot cover ...................32 8 Battery-chamber/memory card slot

cover latch...........................................32 9 Battery-chamber/memory card slot

cover security lock.............................32 10 Speaker 11 Tripod socket *

12 Pressure equalization vent

13 G (menu) button ........................ 26 14 Memory card access lamp................ 43 15 K (playback) button......................... 44 16 J (OK) button .................................... 30 17 Multi selector....................................... 30

& (feature) ........................................... 29 E (exposure compensation) M (flash mode).............................. 91, 92 C (continuous shooting/ self-timer)..................................... 87, 89

18 O (delete) button......................... 45, 82 19 $ (display) button....................... 25 20 Watertight channel ............................ 62 21 Memory card slot................................ 32 22 Battery latch......................................... 32

23

s

A The Multi Selector To navigate the menus, press the multi selector up, down, left, or right (1,3, 4, or 2) as shown below.

Move cursor up Select highlighted item

Return to previous menu Select highlighted item or display sub-menu

Move cursor down

AHolding the Camera When framing photographs, hold the camera as shown below.

Hold the camera in your right hand.

Keep your elbows propped lightly

against your torso.

Cradle the lens with your left hand.

24

s

The Monitor

421 3 5 6 7 8 9 1011

31 30 29 28

17

12 13 14

18

15 16

19

32 33 34

2127 222325 2426 20

NO ICON

Battery fully charged or partially discharged.

H Low battery.

1 Shooting mode ...................................27 2 Live image control ..............................47

Creative mode ....................................49 Best moment capture selection Advanced movie selection ........ 77, 83 Exposure mode ...................................99

3 Flexible program indicator ...............52 4 Flash mode ...........................................92 5 Continuous mode 1 ............................87 6 Active D-Lighting 1 .............................99 7 Picture Control 1 ............................... 100 8 White balance 1 ................................ 100 9 Movie settings (HD movies) 1 ....... 100

Frame rate (slow-motion movies) 1................. 100

10 Image size 1 ..........................................99 11 Image quality 1 ....................................99 12 Focus mode 1 ..............................99, 100 13 AF-area mode 1...........................99, 100 14 Face-priority 1 ............................... 46, 99 15 Focus area............................. 42, 99, 100 16 AF-area brackets 1

17 Flash compensation ...........................99 18 Exposure compensation

19 Flash-ready indicator .........................91 20 K (appears when memory remains

for over 1000 exposures) 21 Number of exposures remaining....39

Number of shots remaining before memory buffer fills

White balance recording indicator Card warning indicator....................121

22 Time available............................... 79, 84 23 ISO sensitivity ....................................100 24 ISO sensitivity indicator...................100

Auto ISO sensitivity indicator 25 Aperture......................................... 54, 55 26 Shutter speed ............................... 53, 55 27 Metering ...............................................99 28 Battery indicator 1, 2

29 Autoexposure (AE) lock indicator 30 Sound settings 1................................101 31 Eye-Fi connection indicator 1

32 Microphone sensitivity 1

33 Time elapsed................................. 79, 84 34 Recording indicator..................... 79, 84

25

s

1 Shown in detailed display. 2 Shown in altimeter, depth gauge, heading, and virtual horizon display.

The $ (Display) Button

35 36 37 38

42

43 39

40

41

35 HDR ........................................................57 36 Auto distortion control......................99 37 Self-timer ..............................................89 38 Heading 2

39 Virtual horizon 2

40 Track log indicator 1, 2

41 Satellite signal indicator 1, 2

42 Altimeter/depth gauge 2 .........68, 101 43 Altitude/depth 2.........................68, 101

Press $ to cycle through shooting or playback indicators.

$ button

A See Also For information on adjusting monitor brightness, see page 100.

26

s

The G Button

The shooting mode and most shooting, playback, and setup options can be accessed from the camera menus. Press the G button to display the menu selection dialog shown below, then use the multi selector to highlight the icon for the desired menu and press J. G button

Playback menu (0 98): Shooting menu (0 99):

Adjust playback settings. Adjust settings for still photography.

Movie menu (0 100): Setup menu (0 100): Adjust movie-recording options. Adjust basic camera settings.

Image processing menu (0 100): Adjust white balance, ISO sensitivity, Picture Controls, and other image processing settings for photographs and movies.

Shooting mode menu (0 27): Choose a shooting mode.

27

s

Choosing a Shooting Mode

Options for each mode can be displayed by highlighting the mode and pressing 2. Press 4 to return to the shooting mode menu.

To display the shooting mode menu, press the G button, highlight Shooting mode, and press J. Use the multi selector to highlight a shooting mode and press J to select the highlighted option.

Motion Snapshot mode

Best moment capture mode

Auto mode (0 40)

Creative mode (0 49)

Advanced movie mode (0 77)

z Motion Snapshot mode: Choose a theme for Motion Snapshots, which combine photographs with brief movie vignettes.

Beauty (1) Relaxation (3) Waves (2) Tenderness (4)

A The C Button When the view through the lens is displayed in the monitor, you can also select the shoot- ing mode by holding the C button, tilting the camera left or right to highlight the desired option, and then releasing the but- ton (0 95).

28

s

u Best moment capture mode: Select Slow view to choose the tim- ing for a shot as the scene plays back in slow motion, or choose Smart Photo Selector to let the camera automatically pick the best shot based on motion and composition.

Slow view (t) Smart Photo Selector (y)

C Auto mode: Take photographs using live controls (0 47). Active D-Lighting (Y) Motion control (6) Background softening (5) Brightness control (E)

w Creative mode: Choose a scene (0 49). Programmed auto (P) Night portrait (o) Shutter-priority auto (S) Backlighting (m) Aperture-priority auto (A) Easy panorama (p) Manual (M) Soft (q) Underwater (4 (5, 6)) Miniature effect (r) Night landscape (j) Selective color (s)

29

s

v Advanced movie mode: Choose between HD (0 77) and slow- motion movies (0 83).

Programmed auto (P) Manual (M) Shutter-priority auto (S) Slow motion (y) Aperture-priority auto (A)

A& (Feature) The options for each mode can also be dis- played by pressing 1 (&) on the multi selec- tor after selecting the shooting mode.

30

s

Using the Menus

1 Select an item.

2 Select an option.

Use the multi selector to navigate the playback, shooting, movie, image pro- cessing, and setup menus.

Multi selector

Press 1 or 3 to highlight menu items and press 2 to view options for the highlighted item.

Press 1 or 3 to highlight the desired option and press J to select.

AUsing the Menus The items listed may vary with camera settings. Items displayed in gray are not currently available. To exit the menus and return to shooting mode, press the shutter-release button halfway (0 42).

A Choosing a Menu To display another menu, press 4 in Step 1 and then press 1 or 3 to highlight the desired icon. Press 2 to position the cursor in the highlighted menu.

31

s

1 Attach the strap. The AN-N1000 strap supplied with the camera is exclusively for use on land. Attach the strap securely to the two camera eyelets.

Remove the AN-N1000 before using the camera underwater. A hand strap (available separately from third-party suppliers) is recommended to prevent loss when the camera is used underwater.

2 Charge the battery. Insert the battery into the charger q and plug the charger in w. An exhausted battery fully charges in about two hours. Unplug the charger and remove the battery when charging is complete.

First Steps

A The Plug Adapter Depending on the country or region of purchase, a plug adapter may be sup- plied with the charger. The shape of the adapter varies with the country or region of purchase. If a plug adapter is supplied, raise the wall plug and connect the plug adapter as shown at right, making sure the plug is fully inserted. Attempting to forcibly remove the plug adapter could damage the product.

Battery charging

Charging complete

32

s

3 Insert the battery and a memory card. Undo the battery-chamber/memory card slot cover security lock (q) and unlatch (w) and slowly open the cover (e). After checking that they are in the correct orientation, insert the battery and memory card as follows: using the battery to keep the orange battery latch pressed to one side, slide the battery in until it latches (r), and then slide in the memory card until it clicks into place (t). Close (y), latch (u), and lock (i) the cover, and confirm that the latch and security lock are in the positions shown (A).

A Formatting Memory Cards If this is the first time the memory card will be used in the camera or if the card has been formatted in another device, select Format memory card in the setup menu and follow the on-screen instruc- tions to format the card (0 100). Note that this permanently deletes any data the card may contain. Be sure to copy any photographs and other data you wish to keep to a computer before proceeding (0 105).

Rear

33

s

4 Attach the special-purpose waterproof lens. The camera is used with special-purpose waterproof lenses that attach as shown below (for information on attaching non-waterproof 1 NIKKOR lenses, see page 110). The lens generally used in this manual for illustrative purposes is a 1 NIKKOR AW 1127.5mm f/3.55.6. When attaching the lens, care should be taken to avoid damage to the camera and lens and to ensure that dust and other foreign matter does not enter the camera or adhere to the O-ring or surrounding area.

Remove the rear lens cap

Remove the camera body cap

Inspect the O-ring: Is it nicked or cracked? If so, replace the

O-ring (0 108). Is it out of position? If so, reposition the

O-ring (0 73). Is there dust or other foreign matter on

the O-ring? If so, remove it from the O- ring (0 73).

34

s

When placing the lens over the O-ring, be careful not to dam- age the camera or lens; do not use excessive force.

Mounting mark (camera)

Mounting mark (lens)Align the mounting marks

Place the lens over the O-ring and press it into position

Rotate the lens as shown until it stops

Check the lens: Remove any dust or other foreign matter from the lens O-ring seal (0 73).

35

s

ADetaching the Waterproof Lenses Be sure the camera is off when removing or exchanging lenses. To remove the lens, press and hold the lens release button (q) while rotating the lens as shown (w) and then detach the lens from the cam- era. After removing the lens, replace the lens caps and camera body cap.

D Attaching and Removing Waterproof Lenses Before attaching or removing a waterproof lens, be sure the lens and camera are completely dry, that the O-ring is not cracked, dam- aged, twisted, or out of position, and that the camera O-ring and lens O-ring seal are free of hair, dust, sand, and other foreign objects. Do not exchange lenses when your hands are wet or have salt on them or in areas exposed to wind, spray, dust, or sand, and be careful that water does not drop into the interior of the camera or lens.

A Silicon Grease The O-ring can be lubricated with the supplied silicon grease or with optional WP-G1000 silicon grease, preventing wear and making waterproof lenses eas- ier to attach and remove (0 108). To apply, place a bead of grease in a plastic bag and use your fingers to spread the grease throughout the bag (q), then insert the O-ring and massage the bag to coat the ring (w). Use only silicon grease designated for use with this product. Failure to observe this precaution could result in O-ring becoming stretched or otherwise deformed.

36

s

5 Turn the camera on.

6 Choose a language.

Press the power switch to turn the camera on. The power lamp will briefly light green and the monitor will turn on. Be sure to remove the lens cap before shooting.

A Turning the Camera Off To turn the camera off, press the power switch again. The monitor will turn off.

A language-selection dialog will be displayed the first time the camera is turned on. Use the multi selector and J button to choose a language.

37

s

7 Set the clock. Use the multi selector and J button (0 22) to set the time and date. Note that the camera uses a 24-hour clock.

Press 4 or 2 to highlight time zone and press J.

Press 1 or 3 to highlight date format and press J.

Press 1 or 3 to highlight daylight saving time option and press J.

Press 4 or 2 to select year, month, or date and press 1 or 3 to change. Press 2 to proceed.

Note: Language and clock can be changed at any time using Language (0 101) and Time zone and date (0 101) options in setup menu.

Press 4 or 2 to select hour, minute, or second and press 1 or 3 to change. Press J when

finished.

38

s

8 Read the instructions on keeping your camera watertight. Once the clock is set, the camera will display a series of messages on main- taining a watertight seal, which you are encouraged to read before using the camera for the first time. Press 4 or 2 to scroll through the messages. To exit, press J when the last mes- sage is displayed.

ANote If you remove and reinsert the battery, the first of these messages may be dis- played again for a few seconds. To view all messages, press $ while the first mes- sage is displayed and then press 4 or 2 to scroll through the remaining mes- sages. To exit, press J.

39

s

9 Check the battery level and memory card capacity. Check the battery level and number of exposures remaining in the moni- tor (0 24).

Battery level

Exposures remaining

z

40

z

Taking and Viewing Photographs The camera gives you a choice of auto mode for point-and- shoot photography that leaves the camera in charge of choos- ing settings, creative mode, which lets you adjust settings according to your subject or creative intent, and a variety of other modes for hard-to-time shots or to capture the emotion surrounding special moments.

Follow the steps below to take photographs in auto mode, a point-and-shoot mode in which the camera automatically detects the subject type and adjusts settings according to the subject and situation.

1 Turn the camera on.

2 Select C mode.

Point-and-Shoot Photography (Auto Mode)

Press the power switch to turn the camera on.

Press the G button to display the menus. Select Shooting mode, then highlight C (auto) and press J (0 27).

41

z

3 Ready the camera.

4 Frame the photograph.

Hold the camera securely with both hands, being careful not to obstruct the lens, AF-assist illuminator, or microphone. Rotate the camera as shown at lower right when taking pic- tures in tall (portrait) orientation.

Position your subject in the center of the frame.

AUsing a Zoom Lens Use the zoom ring to zoom in on the subject so that it fills a larger area of the frame, or zoom out to increase the area visible in the final photo- graph (select longer focal lengths on the lens focal length scale to zoom in, shorter focal lengths to zoom out).

Zoom in

Zoom out

Zoom ring

42

z

5 Focus. Press the shutter-release button halfway to focus. If the subject is poorly lit, the AF-assist illuminator (0 21) may light to assist the focus operation.

If the camera is able to focus, the selected focus area will be highlighted in green and a beep will sound (a beep may not sound if the subject is moving).

If the camera is unable to focus, the focus area will be displayed in red.

Focus area

43

z

6 Shoot. Smoothly press the shutter- release button the rest of the way down to release the shutter and record the photograph. The memory card access lamp will light and the photograph will be displayed in the monitor for a few seconds (the photo will automatically clear from the display when the shutter-release button is pressed halfway). Do not eject the memory card or remove the battery until the l a m p h as g o n e o u t a n d recording is complete.

Memory card access lamp

A The Framing Grid A framing grid can be displayed by selecting On for Display > Grid display in the setup menu (0 100).

44

z

Viewing Photographs

To end playback and return to shooting mode, press the shutter- release button halfway.

Press K to display your most recent pho- tograph full frame in the monitor (full- frame playback).

K button

Press 4 or 2 to view additional pictures.

To zoom in on the current picture, press X. To view multiple pictures, press W when a picture is displayed full frame.

W button

X button

A The C Button During playback, you can also select pictures for display by holding the C button, tilting the camera left or right to highlight the desired image, and then releasing the button to display the highlighted picture full frame (0 96).

A See Also See page 98 for slide show options.

45

z

Deleting Pictures To delete the current picture, press O. Note that once deleted, pic- tures can not be recovered.

1 Display the photograph. Display the photograph you wish to delete as described on the preceding page.

2 Press O.

3 Delete the photograph.

A confirmation dialog will be dis- played.

O button

Press O again to delete the picture and return to playback, or press K to exit without deleting the picture.

ADeleting Multiple Pictures The Delete option in the playback menu (0 98) can be used to delete all or selected pictures.

46

z

A Face Priority The camera detects and focuses on portrait subjects (face priority). A double yellow bor- der will be displayed if a portrait subject is detected facing the camera (if multiple faces, up to a maximum of five, are detected, the camera will select the closest subject). Press the shutter-release button halfway to focus on the subject in the double yellow border. The border will clear from the display if the camera can no longer detect the subject (because, for example, the subject has looked away).

A Automatic Scene Selection In auto mode, the camera automatically ana- lyzes the subject and selects the appropriate scene. The selected scene is shown in the monitor.

Scene icon

c Portrait: Human portrait subjects. d Landscape: Landscapes and cityscapes. f Night portrait: Portrait subjects framed against dark backgrounds. e Close up: Subjects close to the camera. g Night landscape: Poorly-lit landscapes and cityscapes. Z Auto: Subjects that do not fall into the categories listed above.

A Auto Power Off If no operations are performed for about a minute, the display will turn off and the power lamp start to flash. The camera can be reactivated by operating the shutter-release button. If no operations are performed for about three minutes after the display has turned off, the camera will turn off automatically.

47

z

Live Image Control Live image controls let you adjust set- tings without leaving the shooting dis- play, allowing you to preview how the changes will affect your photographs. To view the live image controls available in auto mode, press 1 (&). Highlight a con- trol and press J to select, then press 1 or 3 to adjust the control and press J to return to shooting mode. To cancel the control, press 1 (&) again.

Active D-Lighting: Preserve details in high- lights and shadows for natural contrast.

Increase effect

Reduce effectActive D-Lighting: High Active D-Lighting: Low

Background softening: Soften background details to make your subject stand out, or bring both background and foreground into focus.

Sharpen background

Soften background

Background sharp Background softened

48

z

Motion control: Suggest motion by blurring moving objects, or freeze motion to capture moving objects clearly.

Freeze motion

Blur motion Freeze motion Blur motion

Brightness control: Make pictures brighter or darker.

Brighter

DarkerBrighter Darker

D Live Image Control Continuous shooting is not available (0 87) and the built-in flash can not be used when live image control is in effect. Pressing the movie- record button cancels live image control.

49

z

Choose creative mode to match settings to the subject or situa- tion, take photos using special effects, or control shutter speed and aperture.

1 Select w mode.

2 Choose a scene.

Choosing a Creative Mode

Press the G button to display the menus. Select Shooting mode, then highlight w (creative mode) and press J (0 27).

Press 1 (&) and highlight a scene using the multi selector (0 50).

Press J to select the highlighted scene. Your selection is indicated by an icon in the display.

50

z

Choosing a Mode That Matches the Subject or Situation Choose a creative mode according to the subject or situation:

Option Description

Programmed auto (P)

The camera sets shutter speed and aperture for opti- mal exposure (0 52). Recommended for snapshots and in other situations in which there is little time to adjust camera settings.

Shutter-priority auto (S)

You choose the shutter speed; the camera selects an aperture for best results (0 53). Use to freeze or blur motion.

Aperture-priority auto (A)

You choose the aperture; the camera selects a shut- ter speed for best results (0 54). Use to blur the background or bring both foreground and back- ground into focus.

Manual (M) You control both shutter speed and aperture (0 55). Underwater (4 (5, 6))

Take pictures under water (0 65, 66 ).

Night landscape (j)

Capture low lighting in night scenes. Each time the shutter-release button is fully pressed, the camera takes a series of shots and combines them; during processing, a message is displayed and no pictures can be taken. The flash does not fire and the edges of photos are cropped out. Note that the desired results may not be obtained if the camera or subject moves during shooting; if the camera is unable to combine the images, a warning will be displayed and only one picture will be taken.

51

zNight portrait (o)

Capture background lighting in portraits taken at night or under low light. Each time the shutter- release button is fully pressed, the camera takes a series of shots, some with the flash and some with- out, and combines them; during processing, a mes- sage is displayed and no pictures can be taken. Raise the built-in flash before shooting; no photograph will be taken if the flash is not raised. Note that the edges of photos are cropped out and that the desired results may not be obtained if the camera or subject moves during shooting; if the camera is unable to combine the images, a warning will be displayed and the camera will take a single picture using the flash.

Backlighting (m) Photograph backlit subjects (0 57).

Easy panorama (p) Shoot panoramas for later viewing on the camera (0 58).

Soft (q)

Shoot photographs with a soft filter effect. To choose the amount of softening, press J when the view through the lens is dis- played, highlight an option using the multi selector, and press J to select.

Miniature effect (r)

The top and bottom of each photo is blurred so that the subject appears to have been a diorama photo- graphed at short range. Works best when shooting from a high vantage point.

Selective color (s)

Take photos in which only a selected hue appears in color. To choose the hue, press J when the view through the lens is dis- played and use the multi selector and J button.

Option Description

52

z

Taking Photos in P, S, A, and M Modes P, S, A, and M modes offer varying degrees of control over shutter speed and aperture. Choose a mode and adjust settings accord- ing to your creative intent.

P Programmed Auto In this mode, the camera automatically adjusts shutter speed and aperture for optimal exposure in most situations. This mode is recommended for snapshots and other situations in which you want to leave the camera in charge of shutter speed and aperture.

A Choosing a Combination of Shutter Speed and Aperture Although the shutter speed and aperture chosen by the camera will produce optimal results, you can also choose from other com- binations that will produce the same expo- sure (flexible program). Press X for large apertures (low f-numbers) that blur back- ground details or fast shutter speeds that freeze motion, W for small apertures (high f-numbers) that increase depth of field or slow shutter speeds that blur motion. U is displayed while flexible program is in effect.

ARestoring Default Shutter Speed and Aperture Settings To restore default shutter speed and aperture settings, press X or W until U is no longer displayed or turn the camera off. The default shut- ter speed and aperture is automatically restored when the camera enters standby mode.

W button

X button

53

z

S Shutter-Priority Auto In shutter-priority auto, you choose the shutter speed while the camera automatically selects the aperture that will produce the optimal exposure. Use slow shutter speeds to suggest motion by blurring moving subjects, fast shutter speeds to freeze motion.

Choosing a Shutter Speed Use the X and W buttons to choose from shutter speeds between 30 s and 1/16,000 s. Press X for faster shutter speeds, W for slower shutter speeds.

Fast shutter speed (1/1600 s) Slow shutter speed (1 s)

A Continuous Shooting The selected shutter speed may change if the frame rate for continuous shooting (0 87) is 15 fps or more.

W button

X button

54

z

A Aperture-Priority Auto In aperture-priority auto, you choose the aperture while the camera automatically selects the shutter speed that will produce the optimal exposure. Large apertures (low f-numbers) reduce depth of field, blurring objects behind and in front of the main subject. Small apertures (high f-numbers) increase depth of field, bringing out details in the background and foreground. Short field depths are generally used in portraits to blur back- ground details, long field depths in landscape photographs to bring the foreground and background into focus.

Choosing an Aperture Press W for larger apertures (lower f- numbers), X for smaller apertures (higher f-numbers).

Large aperture (f/5.6) Small aperture (f/16)

W button

X button

55

z

M Manual In manual mode, you control both shutter speed and aperture.

Choosing Shutter Speed and Aperture Adjust shutter speed and aperture with reference to the exposure indicator (see below). Press 2 to highlight shutter speed or aperture and use the X and W buttons to choose a value, then repeat for the remaining item. Press X for faster shutter speeds or smaller apertures (higher f-numbers), W for slower shutter speeds and larger apertures (lower f- numbers). Shutter speeds can be set to values as fast as 1/16,000 s or as slow as 30 s, or to Bulb to hold the shutter open indefinitely for a long time-exposure.

W button

X button

Shutter speed

Press 2 to highlight aperture.

Aperture

Press 2 to highlight shutter speed.

56

z

A The Exposure Indicator When shutter speeds other than Bulb are selected, the exposure indicator shows whether the photograph would be under- or over-exposed at current settings.

Optimal exposure Underexposed by 1/3 EV Overexposed by over 2 EV

57

z

Backlighting The method used to capture details in shaded areas of back-lit subjects depends on the option selected for HDR in the shoot- ing menu (0 99).

On

Details in highlights and shadows are preserved using HDR (high dynamic range); Z appears in the display. Each time the shutter- release button is fully pressed, the camera takes two shots in quick succession and combines them to preserve details in highlights and shadows in high-contrast scenes; the built-in flash does not fire. While the shots are combined, a message will be displayed and the shutter release will be disabled. The final photograph will be displayed when processing is complete.

+

First exposure (darker)

Second exposure (brighter)

Combined HDR image

Off

The flash fires to fill in (illuminate) shadows in back-lit subjects. Only one shot is taken when the shutter-release button is fully pressed, and the flash fires with each shot. No pictures will be taken if the built-in flash is not raised; raise the flash before shooting.

D Framing HDR Photographs The edges of the image will be cropped out. The desired results may not be achieved if the camera or subject moves during shooting. Depending on the scene, shading may be uneven and shadows may appear around bright objects or halos around dark objects. If the cam- era is unable to successfully combine the two images, a single image will be recorded at normal exposure and Active D-Lighting (0 99) will be applied.

58

z

Easy Panorama Follow the steps below to shoot panoramas. During shooting, the camera focuses using auto-area AF; face detection is not available. Exposure compensation can be used, but the built-in flash will not fire.

1 Set focus and exposure. Frame the start of the pan- orama and press the shut- ter-release button halfway. Guides will appear in the display.

2 Start shooting. Press the shutter-release button the rest of the way down and then lift your fin- ger from the button. a, c, d, and b icons will appear in the display to indicate the possible pan directions.

3 Pan the camera. Slowly pan the camera up, down, left, or right as shown below. Shooting will start when the camera detects the pan direction and a progress indicator will appear in the display. Shooting ends automatically when the end of the panorama is reached.

Progress indicator

59

z

An example of how to pan the camera is shown below. With- out changing your position, pan the camera in a steady curve either horizontally or vertically. Time the pan according to the option selected for Image size in the shooting menu: about 15 seconds are needed to complete the pan when A Normal panorama is selected, about 30 seconds when B Wide panorama is selected.

A Panoramas High-distortion wide-angle lenses may fail to produce the desired results. An error message will be displayed if the camera is panned too quickly or unsteadily.

The completed panorama will be slightly smaller than the area visible in the display during shooting. No panorama will be recorded if shoot- ing ends before the halfway point; if shooting ends after the halfway point but before the panorama is complete, the unrecorded portion will be shown in gray.

60

z

Viewing Panoramas Panoramas can be viewed by pressing J when a panorama is displayed full frame (0 44). The start of the panorama will be displayed with the smallest dimension filling the display and the camera will then scroll through the picture in the original pan direction.

The following operations can be performed:

Navigation window

Guide

To Use Description

Pause Pause playback.

Play J Resume playback when the panorama is paused or during rewind/advance.

Advance/ rewind

Press 4 to rewind, 2 to advance. If playback is paused, the panorama rewinds or advances a segment at a time; keep the button pressed for continuous rewind or advance.

Return to full-frame playback

/K Press 1 or K to exit to full-frame playback.

61

P

PUnderwater Photography With a special-purpose waterproof lens attached, the camera can be used at depths of up to 15 m (49 ft) for as long as 60 minutes at a time. Before using the camera under water, be sure that you have read and understood the instructions in this section and have removed straps intended exclusively for use on land (hand straps, available separately from third-party suppli- ers, are recommended to prevent loss during underwater use).

To prevent water entry or other damage, observe the following precautions when using the camera underwater: Be sure a special-purpose waterproof lens is attached. The

camera is not waterproof when a waterproof lens is not attached, while waterproof lenses are only waterproof when attached to the camera. Do not expose the camera to water when a waterproof lens is not attached nor waterproof lens to water when not attached to the camera.

The sudden change in temperature caused by taking the cam- era into the water after it has been left on the beach, in direct sunlight, or in other locations exposed to high temperatures could result in water droplets forming inside the camera or lens, potentially damaging the products.

Do not remove the lens under water, open the connector or battery-chamber/memory card slot cover, or operate the lens release button or the latches or security locks on the connector and battery-chamber/memory card slot covers while the cam- era is immersed.

Do not leave the product immersed for more than 60 minutes at a time or expose it to depths greater than 15 m (49 ft) or to rapids, waterfalls, water flowing at full force from a tap, or other water under high pressure. Failure to observe these precau- tions could expose the product to pressures high enough to cause water entry.

Important: Precautions

62

P

Do not expose the camera to water colder than 0 C (32 F) or warmer than 40 C (104 F). Do not take into hot springs or baths.

Do not dive into the water with the camera, drop it, place it under heavy objects, or otherwise subject it to violent shocks or exces- sive physical pressure or force. The camera may deform and become vulnerable to leaks under excessive external pressure.

Failure to follow correct procedures before or during use could result in irreparable damage to the product due to water entry. Should the product leak, cease use immediately, dry the camera and lens, and consult a Nikon-authorized service representative.

The camera does not float. Be careful not to drop the camera while in or on the water.

Condensation may form inside the lens or monitor if the prod- uct is exposed to rapid changes in temperature, such as occur when the product is taken into cold water from a hot shore location, into a warm room from a cold exterior, or the battery- chamber/memory card slot cover is opened or closed or lenses are attached or removed in a humid location. Such condensa- tion will not cause malfunction or other damage.

Before using the camera underwater, complete the following checklist.

Before Using the Camera Underwater

Have you removed the strap intended exclusively for use on land? We recommend that you attach a hand strap (available separately from third-party suppliers) before taking the camera into the water.

Have you attached the special-purpose waterproof lens (0 33)?

63

PHave you inserted the battery and memory card (0 32)?

To prevent water entry and other damage, remove any sand, dust, hair, and foreign objects from under the connector and battery-chamber/ memory card slot covers, and use a blower or cotton swab to remove foreign objects from inside the camera (when using a cotton swab, be sure not to leave any threads behind). If the watertight channel is cracked, deformed, or damaged, consult a Nikon-authorized service representative.

Be sure that the connector and battery-chamber/memory card slot covers are fully closed, that the hand strap is not caught in either cover, and that the latches and security locks are in the positions shown.

64

P

The Final Check After going through the pre-shooting checklist on page 62 and confirming that the special-purpose waterproof lens is attached and the connector and battery- chamber/memory card slot covers are closed and secure, immerse the camera in fresh water, turn it on, and test the zoom ring and camera controls to ensure that they operate nor- mally and that the camera does not leak. To prevent water entry and other damage, do not operate the lens release button or the latches or security locks on the connector and battery-chamber/ memory card slot covers.

Should you notice air escaping from around the lens mount or the connector and battery-chamber/memory card slot covers, end the test and remove the camera from the water immediately (air escaping from the pressure-equalization vent and micro- phone and speaker covers is normal and does not indicate a mal- function). Dry the camera and lens thoroughly and check the O- ring and connector and battery-chamber/memory card slot cov- ers are properly sealed. Consult a Nikon-authorized service rep- resentative if you find that the camera leaks in normal use.

65

P

Follow steps below to take pictures in Underwater mode.

1 Turn the camera on.

2 Select w mode.

3 Select Underwater.

Taking Pictures Underwater

Press the power switch to turn the camera on.

Press the G button to display the menus, then select Shooting mode, highlight w (creative mode), and press J (0 27).

Press 1 (&) to display the creative menu. Highlight Underwater and press J to display underwater pro- cessing options.

66

P

4 Choose an option.

5 Take pictures.

Highlight one of the following options and press J to select the highlighted option and return to the shooting dis- play. 4 Standard: Standard processing for

balanced results when shooting along the shore or in shallow water.

5 Scuba: Vivid colors for deeper waters.

6 Close up: Enhanced contrast for underwater close-ups.

To take photographs, press the shut- ter-release button halfway to focus and the rest of the way down to shoot. The shutter will be released whether or not the camera is in focus. Movies can be recorded using the movie- record button.

Shutter-release button

Movie-record button

AUnderwater Mode The creative mode Underwater option automatically compensates for the blue cast in underwater lighting. Colors can be pre- viewed in the monitor and adjusted manu- ally or using preset options; the results apply to both photographs and movies. To adjust the blue-green balance manually, press J in the shooting display and then press 1 or 3. Press J to exit when colors are adjusted to your satisfaction.

Bluer

Greener

67

P

The following features may come in handy when you are taking pictures underwater.

Auto Distortion Control

The Built-in Flash To raise the flash for use underwater, press the flash pop-up but- ton (0 91). Note that manual color adjustment is not available when the flash is used with the creative mode Underwater option (0 66). Water currents can push the flash part way down, causing vignetting (0 94).

Tips and Tricks for Underwater Photography

To control distortion when shooting underwater, select On (underwater) for Auto distortion control in the shooting menu (0 99). This option is only available when a special-purpose underwater lens is attached.

A See Also The Underwater white balance option can be used to correct for the blue cast in underwater lighting (0 100).

68

P

The Depth Gauge

Viewing Depth

1 Select Record location data.

2 Select Yes.

3 Select Altimeter/depth gauge.

Using the depth gauge, you can view your depth during shooting or include the depth in the photo info recorded when a picture is taken. Set the gauge to zero before entering the water (0 70).

In the setup menu, select Location data, then highlight Record location data and press 2.

Highlight Yes and press J.

In the setup menu, select Altitude/ depth options, then highlight Altim- eter/depth gauge and press 2.

69

P

4 Select Depth gauge.

5 Exit the menus.

6 Display the depth gauge.

Highlight Depth gauge and press J.

Press the shutter-release button half- way to exit the menus.

Press the $ button to display the depth gauge (0 25).

A The Depth Gauge The camera depth gauge is not intended as a replacement for specialized diving gauges; the depths shown are approxima- tions only. The display will not show depths over 20 m (65.6 ft); depths over 15 m (49 ft) are shown in red.

70

P

Setting the Depth Gauge to Zero Follow the steps below to set the depth gauge to zero.

1 Select Alt./depth correction.

2 Select Correct manually.

3 Set the depth gauge to zero.

In the setup menu, select Altitude/ depth options, then highlight Alt./ depth correction and press 2.

Highlight Correct manually and press 2.

Press 4 or 2 to highlight digits and press 1 or 3 to change. Press J when changes are complete.

A See Also For information on altitude and depth options, see page 101.

71

P

The camera and lens should be cleaned within 60 minutes of underwater use. Leaving the lens attached, immerse the camera in fresh water to remove salt and other foreign matter. Failure to observe this precaution could result in damage, discoloration, corrosion, offensive odors, or vulnerability to leaks.

1 Ready the camera.

2 Immerse the camera and lens.

After Using the Camera Underwater

DBefore Cleaning the Camera and Lens Clean the product indoors in areas not exposed to sand or spray and be sure to remove the front cap from the lens and any water, salt, sand, or other foreign matter from your hands or hair before proceeding. Do not open the connector or battery-chamber/memory card slot cover until all foreign matter has been washed away and the camera is dry.

Be sure that the special-purpose waterproof lens is attached and that connector and battery-chamber/ memory card slot covers are closed with the latches and security locks in the positions shown.

Leaving the lens attached, immerse the camera in a basin of fresh water for about 10 minutes. To prevent water entry and other damage, do not open the camera connector or battery- chamber/memory card slot cover while the camera is immersed.

72

P

3 Clean the zoom ring and camera controls. Being careful not to touch the lens release button or the latches or security locks on the connector and battery- chamber/memory card slot covers, press the flash pop-up button to raise the built-in flash and gently move the camera side to side, then operate the lens zoom ring and each of the remaining camera controls a few times to remove salt and other foreign objects.

4 Wipe dry.

5 Leave in the shade.

6 Clean inside the covers. After confirming that no water or other foreign matter remains on the camera, slowly open the connector and battery-chamber/memory card slot covers and remove any water droplets, sand, or other foreign matter from the interior with a soft, dry cloth.

Dry the camera and lens barrel with a soft, dry cloth. Water, fingerprints, and other foreign matter on the front lens element should be removed immedi- ately by gently wiping the glass with a soft, dry cloth. Do not use force.

Without removing the lens, place the camera on a dry cloth as shown and leave it to dry in a shady, well-venti- lated area. Water will drain from the zoom ring, pressure-equalization vent, and the holes in the microphone and speaker covers.

73

P

To prevent water falling into the camera when the covers are opened, hold the camera so that the covers open down- wards.

7 Remove the lens.

The O-Ring The camera uses an O-ring to form a watertight seal. Improper handling of the O-ring can produce leaks. Check the condition of the O-ring as described below whenever the camera has been used under water or whenever foreign matter is found on the O-ring when the lens is removed.

1 Remove the O-ring.

After confirming that the lens and camera are dry, detach the lens and gently wipe the lens O-ring seal with a soft, dry cloth to remove any foreign objects. Note that there may still be water between the camera and the lens; to prevent water falling onto the dust shield or lens when the lens is detached, keep the camera flat and remove the lens slowly.

Lightly stretch the O-ring by sliding your fingers along either side and remove it from the camera (you can also use an optional O-ring remover; 0 108). Do not apply excessive force or use your fingernails, metal objects, or edged or pointed tools.

74

P

2 Wash the O-ring. Wash the O-ring thoroughly in fresh water and dry thor- oughly. Do not use benzene, thinner, alcohol, soap, neutral detergents, or other cleaning products, as these could dam- age or weaken the O-ring.

3 Inspect the O-ring.

4 Inspect the O-ring guide.

5 Grease the O-ring.

Remove any foreign matter with a soft, dry cloth, taking care not to leave tissue or threads on the O-ring. Gently bend the O-ring to check for cracking or other damage.

Use a blower or cotton swab to remove any foreign objects from the O-ring guide. Be sure to remove any threads left behind by the swab.

Place a bead of silicon grease in a plas- tic bag and use your fingers to spread the grease throughout the bag (q), then insert the O-ring and massage the bag to coat the ring (w).

75

P

6 Re-insert the O-ring. After making sure that O-ring and guide are free of foreign objects, place the O-ring so that it runs evenly at the same level all the way round the O- ring guide, without undue stretching and without protruding from the guide.

DO-Rings The O-ring requires periodic replacement. Replace the O-ring immedi- ately if it is damaged, cracked, warped, or has lost its elasticity. O-rings should be replaced at least once a year even if the product has not been used; use only O-rings designated for use in this product. O-rings must be greased before use and whenever the surface appears dry; fail- ure to observe this precaution could result in the O-ring cracking and water entering the camera.

A Silicon Grease Coating the O-ring with the supplied silicon grease prevents wear and ensures that the lens rotates smoothly. Use only the supplied silicon grease or optional WP-G1000 silicon grease (0 108); failure to observe this precaution could result in O-ring becoming stretched or otherwise deformed. Replacement O-rings and silicon grease can be purchased from a Nikon camera retailer or Nikon-authorized service representa- tive. Do not use grease in excessive amounts or apply using paper or cloth, as this may cause dust or fibers to adhere to the O-ring, making the product vulnerable to leaks.

76

P

DMaintenance Observe the following precautions when cleaning the camera and lens after underwater use. Never remove the lens or open the connector or battery-chamber/

memory card slot cover under water. Before exchanging lenses or opening or closing the covers, wipe off water with a soft, dry cloth and be sure the product is completely dry, as otherwise water from the lens or covers may fall into the battery chamber or memory card slot or onto the battery, memory card, watertight channel, hinges, or con- nectors. Choose shaded locations free from spray, wind, dust, and sand, and check for water on the inside of the covers before closing them. Water on the inside of the covers could result in condensation or other damage.

Air may escape from the pressure-equaliza- tion vent or microphone and speaker cov- ers when the camera is immersed. This is normal and does not indicate a malfunc- tion. Note that water in the holes of the microphone and speaker covers may inter- fere with sound quality; dry the covers with a soft, dry cloth, but do not insert sharp objects into the holes, as this could damage the camera or make it vulnerable to leaks.

Do not dry the camera or lens by leaving it in direct sunlight or dry using hair dryers or other powered devices. Failure to observe this precaution could damage the camera, lens, or O-ring, resulting in leaks.

Benzene, thinner, alcohol, soap, neutral detergents, and other clean- ing products may deform the watertight channel or camera body, making the product vulnerable to leaks.

To ensure that the product remains waterproof, have the watertight channel inspected once a year, and serviced once every 3 to 5 years, by a Nikon-authorized service representative. Fees are charged for these services.

A Foreign Matter on the Camera and Lens Liquid on the lens O-ring seal or inside the connector or battery-cham- ber/memory card slot cover should be removed immediately with a soft, dry cloth; other foreign matter should be removed with a blower, taking care to remove any small particles from the sides and corners of the watertight channels. Foreign matter on the camera body can be removed with a soft, dry cloth.

77

y

yRecording and Viewing Movies The camera can record high-definition (HD) movies with an aspect ratio of 16 : 9 and slow-motion movies with an aspect ratio of 8 : 3. Movie recording is available in the shooting modes listed below (movie recording is not available in best moment capture and Motion Snapshot modes).

Mode Movie type Description

C Auto mode (0 40)

HD (16 : 9)

The camera automatically optimizes settings for the current subject or scene.

w Creative mode (0 49)

Shoot movies. Regardless of the scene selected with the camera, movies are recorded in mode P; shutter speed and aperture are controlled by the camera.

v Advanced movie mode (0 78, 83)

Programmed auto (P)

Shutter speed and aperture are controlled by the camera.

Shutter- priority auto (S)

You choose the shutter speed; the camera automati- cally adjusts aperture for optimal exposure (0 53).

Aperture- priority auto (A)

You choose the aperture; the camera automatically adjusts shutter speed for optimal exposure (0 54).

Manual (M) You choose the shutter speed and aperture (0 55).

Slow motion (y)

Slow motion (8 : 3)

Record silent slow-motion movies. Movies are recorded at 400 fps and play back at about 30 fps (0 83).

78

y

Record movies with sound at an aspect ratio of 16 : 9.

1 Turn the camera on.

2 Frame the opening shot.

Recording HD Movies

Press the power switch to turn the camera on.

Frame the opening shot with your subject in the center of the display.

A The 0 Icon A 0 icon indicates that movies can not be recorded.

79

y

3 Start recording.

4 End recording.

Press the movie-record button to begin recording. A recording indica- tor, the time elapsed, and the time available are displayed while record- ing is in progress.

A Audio Recording Be careful not to cover the microphone and note that the built-in microphone may record sounds made by the camera or lens; these noises may sound louder under water. By default, the camera focuses continuously. The Movie sound options item in the movie menu offers microphone sensitivity and wind noise options (0 100).

Movie-record button

Recording indicator/ Time elapsed

Time available

Press the movie-record button again to end recording. Recording will end automatically when the maximum length is reached, the memory card is full, the lens is removed, or the camera becomes hot (0 18).

Movie-record button

AMaximum Length At default settings, HD movies can be up to 4 GB in size and 20 min- utes in length; note that depending on memory card write speed, shooting may end before this length is reached (0 113).

80

y

Taking Photographs During HD Movie Recording Press the shutter-release button all the way down to take a photograph without interrupting HD movie recording. Photo- graphs taken during movie recording have an aspect ratio of 3 : 2.

A Taking Photographs During Movie Recording Up to 20 photographs can be taken with each movie shot. Please note that photographs can not be taken with slow-motion movies.

A Focus Lock If Single AF is selected for Focus mode in the movie menu for advanced movie mode, focus will lock while the shutter-release button is pressed halfway (0 100).

81

y

Viewing Movies Movies are indicated by a 1 icon in full-frame playback (0 44). Press J to start playback.

The following operations can be performed:

1 icon/Length Movie playback indicator/

Current position/total length

Guide Volume

To Use Description

Pause Pause playback.

Play J Resume playback when the movie is paused or during rewind/advance.

Advance/ rewind

Press 4 to rewind, 2 to advance. Speed increases with each press, from 2 to 4 to 8 to 16. If playback is paused, the movie rewinds or advances one frame at a time; keep the button pressed for continuous rewind or advance.

Adjust volume

X/W Press X to increase volume, W to decrease.

Return to full-frame playback

/K Press 1 or K to exit to full-frame playback.

82

y

Deleting Movies To delete the current movie, press O. A confirmation dialog will be displayed; press O again to delete the movie and return to playback, or press K to exit without deleting the movie. Note that once deleted, movies can not be recovered.

A See Also The Edit movie option in the playback menu can be used to trim unwanted footage from existing movies (0 98).

Use the Movie settings option in the movie menu to choose the frame size and rate for HD movies (0 100).

A The C Button During movie playback and when playback is paused, you can advance and rewind by holding the C button and tilting the camera left or right (0 96).

O button

83

y

Silent slow-motion movies with an aspect ratio of 8 : 3 can be recorded by pressing 1 (&) in advanced movie mode and selecting y Slow motion. Slow-motion movies are recorded at 400 fps and play back at about 30 fps.

1 Select v mode.

2 Select Slow motion. Press 1 (&), then highlight Slow motion and press J.

3 Frame the opening shot.

Recording Slow-Motion Movies

Press the G button to display the menus, then select Shooting mode, highlight v (Advanced movie), and press J (0 27).

Frame the opening shot with your subject in the center of the display.

84

y

4 Focus.

5 Start recording. Press the movie-record button to begin recording. A recording indica- tor, the time elapsed, and the time available are displayed while record- ing is in progress. The camera focuses on the subject at the center of the dis- play; face detection (0 46) is not available and focus and exposure can not be adjusted.

Movie-record button

Recording indicator/ Time elapsed

Time available

Focus area

85

y

6 End recording. Press the movie-record button again to end recording. Recording will end automatically when the maximum length is reached, the memory card is full, the lens is removed, or the camera becomes hot (0 18).

Movie-record button

AMaximum Length Up to 3 seconds of footage can be recorded; note that depending on memory card write speed, shooting may end before this length is reached (0 113).

86

y

DRecording Movies Flicker, banding, or distortion may be visible in the display and in the final movie under fluorescent, mercury vapor, or sodium lamps or if the camera is panned horizontally or an object moves at high speed through frame (flicker and banding can be reduced in HD movies by choosing a Flicker reduction option that matches the frequency of the local AC power supply as described on page 101, but note that the slowest shutter speed available is 1/100 s at 50 Hz, 1/60 s at 60 Hz; flicker reduction is not available with slow-motion movies). Bright light sources may leave after-images when the camera is panned. Jagged edges, color fringing, moir, and bright spots may also appear. When recording movies, avoid pointing the camera at the sun or other strong light sources. Failure to observe this precaution could result in damage to the cameras internal circuitry.

A The Movie Crop The movie crop is shown in the monitor.

A See Also Use the Frame rate option in the movie menu to choose the frame rate for slow-motion movies (0 100).

HD crop (16 : 9) Slow-motion movie crop (8 : 3)

87

t

t

More on Photography This section describes other features you can use when taking pictures.

In continuous (burst) mode, the camera takes pictures while the shutter-release button is pressed all the way down.

1 Display release mode options.

2 Select a frame rate.

3 Compose the shot and start shooting.

Continuous Mode

Press 4 (C) to display release mode options.

Highlight the desired frame rate and press J. Frame rate is expressed in terms of the number of f rames recorded per second (fps); choose from frame rates of approximately 5, 15, 30, and 60 fps (5 fps, 15 fps , 30 fps, and 60 fps, respectively).

The camera takes pictures while the shutter-release button is pressed all the way down.

88

t

D Continuous Mode The maximum number of shots that can be taken in a single burst var- ies with the release mode. At frame rates of 30 and 60 fps, the maxi- mum number of shots that can be taken in a single burst is 20.

The built-in flash can be used when 5 fps is selected, but only one pic- ture will be taken each time the shutter-release button is pressed; at settings of 15, 30, and 60 fps, the built-in flash will not fire.

While photographs are being recorded to the memory card, the mem- ory card access lamp will light. Depending on shooting conditions and memory card write speed, recording may take some time. If the battery is exhausted before all photographs are recorded, the shutter release will be disabled and the remaining images transferred to the memory card.

Continuous shooting is not available in creative modes other than P, S, A, M, or 4 (underwater; 5, 6), in best moment capture, advanced movie, or Motion Snapshot mode, or when live image control is used in auto mode (0 47).

A Single Frame To take only one picture each time the shutter-release button is pressed all the way down, select 8 (single frame, the default option) for Continuous/self-timer.

89

t

The self-timer is used to delay shutter release until 10, 5, or 2 sec- onds after the shutter-release button is pressed all the way down.

1 Display release mode options.

2 Select the desired self-timer option.

3 Mount the camera on a tripod. Mount the camera on a tripod or place the camera on a sta- ble, level surface.

4 Frame the photograph and shoot. Press the shutter-release button half- way to focus, and then press the but- ton the rest of the way down. The self- timer lamp will start to flash and a beep will begin to sound. Two sec- onds before the photo is taken, the lamp will stop flashing and the beep- ing will become more rapid.

Self-Timer Modes

Press 4 (C) to display release mode options.

Use the multi selector to highlight E 10 s, E 5 s, or E 2 s and press J.

90

t

Note that the timer may not start or a photograph may not be taken if the camera is unable to focus or in other situations in which the shutter can not be released. Turning the camera off cancels the self-timer.

AMovie Mode In self-timer mode, start and stop the timer by pressing the movie- record button instead of the shutter-release button.

ARaising the Flash If additional lighting is required, press the flash pop-up button to raise the flash before shooting. Shooting will be interrupted if the flash is raised while the timer is counting down.

A See Also For information on controlling the beeps that sound when the self- timer is used, see page 101.

91

t

Use the built-in flash for additional lighting when the subject is poorly lit or to fill-in (illuminate) back-lit subjects.

1 Raise the flash.

2 Choose a flash mode (0 92).

3 Take pictures.

The Built-in Flash

Press the flash pop-up button to raise the flash.

Flash pop-up button

Press 3 (N) on the multi selector to display a list of flash modes, then use the multi selector to highlight the desired mode and press J to select.

Charging begins when the flash is raised; once charging is complete, a flash-ready indicator (N) will be dis- played when the shutter-release but- ton is pressed halfway.

92

t

Flash Modes The options available vary with the shooting mode. N (fill flash): The flash fires with every shot. NY (red-eye reduction): Use for portraits. The flash fires with

every shot, but before it fires, the red-eye reduction lamp lights to help reduce red-eye. Not available in 4 (underwater; 5, 6) mode.

NYp (red-eye reduction + slow sync): As for red-eye reduction, above, except that shutter speed slows automatically to cap- ture background lighting at night or under low light. Use when you want to include background lighting in portraits. Available only in modes P and A.

Np (fill flash + slow sync): As for fill flash, above, except that shutter speed slows automatically to capture background lighting at night or under low light. Use when you want to cap- ture both subject and background. Available only in modes P, A, and 4 (underwater; 5, 6).

Nr (rear curtain + slow sync): As for rear-curtain sync, below, except that shutter speed slows automatically to capture back- ground lighting at night or under low light. Use when you want to capture both subject and background. Available only in modes P, A, and 4 (underwater; 5, 6).

Nq (rear-curtain sync): The flash fires just before the shutter closes, creating a stream of light behind moving light sources as shown below at right. Available only in modes S and M.

s (off): The flash does not fire. Available only when built-in flash is raised; not available in o (night portrait) mode or when HDR is disabled in m (backlighting) mode.

Front-curtain sync Rear-curtain sync

93

t

DRaising the Flash When using the flash, be sure it is fully raised as shown at right. Do not touch the flash dur- ing shooting.

A Lowering the Built-in Flash To save power when the flash is not in use, press it gently downward until the latch clicks into place. Do not use force. Failure to observe this precaution could result in prod- uct malfunction.

A Preventing the Built-in Flash from Firing Lowering the flash prevents it firing. Except in o (night portrait) mode or when HDR is disabled in m (backlighting) mode (0 57), the flash can also be turned off by selecting a flash mode of s (off ).

94

t

AUsing the Built-in Flash The built-in flash can not be used with live image control (0 47) and will not fire during continuous shooting at frame advance rates faster than 5 fps (0 87) or when On is selected for HDR in the shooting menu (0 57). If the flash is fired multiple times in quick succession, the flash and shutter may be temporarily disabled to protect the flash. Shooting can be resumed after a brief pause.

Objects close to the camera may be overexposed in photographs taken with the flash at high ISO sensitivities. Note that the product is not shockproof (0 10) when the flash is raised.

To avoid vignetting, remove lens hoods. Even without a lens hood, some lenses may cause vignetting or obstruct the red-eye reduction lamp, interfering with red-eye reduction. The following illustrations show the effect of vignetting caused by shadows cast by the lens when the built-in flash is used.

Shadow Shadow After using the built-in flash in dusty or sandy locations, remove any foreign matter from inside the flash compartment using a blower (or, if this fails, using the technique described on page 71) before lowering the flash. Failure to observe this precaution could damage the flash.

A Aperture, Sensitivity, and Flash Range Flash range varies with sensitivity (ISO equivalency) and aperture. With the standard zoom lens at maximum aperture and ISO sensitivity set to ISO 160 to 6400, the range is approximately 0.6 m7.0 m (2 ft23 ft) when the lens is zoomed all the way out, 0.6 m4.2 m (2 ft13.8 ft) at maximum zoom.

95

t

Some operations can be performed by keeping the C button pressed and tilting the camera left or right.

Shooting: Choosing a Shooting Mode While the view through the lens is displayed, you can choose the shooting mode by pressing the C button, tilting the camera left or right to highlight the desired mode, and releasing the button to select the highlighted option.

To exit without changing settings, tilt the camera forward or back so that no option is highlighted when the C button is released.

The C (Action) Button

96

t

Playback: Scrolling Through Pictures During playback, you can choose the picture displayed by press- ing the C button, tilting the camera left or right, and releasing the button to display the selected picture full frame (in thumb- nail playback, the camera will display and scroll through pictures full frame while the C button is pressed, and then when the but- ton is released return to thumbnail playback with the selected picture highlighted).

Tilt the camera sharply to jump ahead or back 10 pictures. Dur- ing movie playback, you can press the C button and tilt the camera to advance or rewind (0 82; speed increases the more you tilt the camera). When movie playback is paused, you can press the C button and tilt the camera to advance or rewind a frame at a time; playback pauses again when the button is released.

View previous picture View next picture

97

t

Menus: Outdoor Display When menus are displayed, you can toggle the outdoor display on or off by pressing the C button, tilting the camera left or right, and releasing the button to select the current mode. Enabling the outdoor display makes the display easier to read outdoors or wherever ambient lighting is bright by setting the Display brightness and High contrast display options in the Display menu to Hi and On, respectively (0 100), but also increases the drain on the battery.

To exit without changing settings, tilt the camera forward or back so that no option is highlighted when the C button is released.

D The C Button Hold the camera securely when using the C button. Controls other than the shutter-release and C buttons and the power switch can not be used while the C button is pressed. The C button can not be used to view NMS format Motion Snapshots or for playback zoom, calendar or panorama playback, or Smart Photo Selector shot selection.

M

98

M

Menu Options

Playback Menu Options

To display the playback, shooting, movie, image processing, and setup menus, press the G button. Following menu options are available:

G button

Option Description Delete Delete multiple images. Slide show View movies and photos in a slide show.

Image review Choose whether pictures are displayed after shooting.

Rotate tall Rotate tall (portrait-orientation) pictures for display during playback.

DPOF print order Create digital print orders. Protect Protect pictures from accidental deletion. Rating Rate pictures.

D-Lighting Brighten shadows in dark or back-lit photos, creating a retouched copy that is saved separately from the unmodified original.

Resize Create small copies of selected pictures. Crop Create cropped copies of selected pictures.

Face-priority zoom Choose whether 4 and 2 can be used during playback zoom to select faces detected with face priority.

Edit movie Create copies of movies from which unwanted footage has been trimmed.

Change theme Change the themes for existing Motion Snapshots.

99

M

Shooting Menu Options

Option Description Reset shooting options

Reset shooting options to default values.

Exposure mode Choose how the camera sets shutter speed and aperture in Motion Snapshot mode.

Image quality Choose a file format and compression ratio. Image size Choose a size for new photos. Number of shots saved

Choose the number of shots selected by the Smart Photo Selector.

Movie before/after Choose when the movie portion of Motion Snapshots is recorded.

File format Choose a file format for new Motion Snapshots. Metering Choose how the camera meters exposure.

Auto distortion control

Choose whether the camera corrects barrel and pin- cushion distortion (also applies during underwater shooting with special-purpose waterproof lenses; 0 67).

Color space Choose a color space for new pictures. Active D-Lighting Avoid loss of detail in highlights and shadows.

HDR Enhance detail in highlights and shadows when photographing high-contrast scenes with Backlighting selected in creative mode.

Long exposure NR Reduce noise in long time-exposures.

Optical VR Adjust settings for 1 NIKKOR lenses with vibration reduction.

Electronic VR

Choose whether to use vibration reduction in Motion Snapshot mode. This feature is available even if vibration reduction is not offered by the attached 1 NIKKOR lens.

Focus mode Choose how the camera focuses. AF-area mode Choose how the focus area is selected. Face-priority Turn face priority on or off. Built-in AF assist Control the built-in AF-assist illuminator. Flash control Choose a flash mode for the built-in flash. Flash compensation Control flash output.

100

M

Movie Menu Options

Image Processing Menu Options

Setup Menu Options

Option Description Reset movie options Reset movie menu options to their default values. Frame rate Choose a frame rate for slow-motion movies (0 83). Movie settings Choose HD movie frame size and frame rate (0 78). Metering Choose how the camera meters exposure. Movie sound options Choose sound recording options.

Optical VR Adjust settings for 1 NIKKOR lenses with vibration reduction.

Focus mode Choose how the camera focuses. AF-area mode Choose how the focus area is selected. Face-priority Turn face priority on or off.

Option Description Reset processing options

Reset image processing options to their default values.

White balance Adjust settings for different types of lighting. ISO sensitivity Control the cameras sensitivity to light. Picture Control Choose how the camera processes pictures. Custom Picture Control

Create custom Picture Controls.

High ISO noise reduction

Reduce noise at high ISO sensitivities.

Option Description Reset setup options Reset setup menu options to default values. Format memory card Format the memory card. Slot empty release lock

Allow the shutter to be released when no memory card is inserted in the camera.

Display Adjust display brightness and contrast or view or hide a framing grid.

101

M

* Available only when optional WU-1b wireless mobile adapter is attached.

Sound settings Choose the sounds made during shooting. Auto power off Choose the auto power off delay. Shutter button AE lock

Choose whether exposure locks when the shutter- release button is pressed halfway.

Control lock Disable selected controls.

Location data

Record or view location data or use location data to set the clock, update assisted GPS files, and choose auto power off options for when the location data function is active.

Create log Log location and depth in files saved to the memory card.

Delete log Delete logs from the memory card. Compass correction Calibrate the built-in electronic compass. Altitude/depth options

Choose whether the camera reports altitude or depth; calibrate the altimeter or depth gauge.

HDMI device control Choose whether remote controls for HDMI-CEC devices to which the camera is connected can be used to operate the camera.

Flicker reduction Reduce flicker or banding. Reset file numbering Reset file numbering. Time zone and date Set the camera clock. Language Choose a language for the camera displays. Auto image rotation Record camera orientation with pictures. Wireless mobile adapter * Enable or disable the wireless mobile adapter.

Pixel mapping Check and optimize the camera image sensor and image processors.

Firmware version Display the current firmware version.

Option Description

Q

102

Q

Connecting to a Computer

Install the supplied software to copy pictures to your computer for viewing and editing pictures and creating short movies. Before installing the software, confirm that your system meets the requirements on page 103.

1 Launch the installer. Start the computer, insert the ViewNX 2/Short Movie Creator installer CD, and launch the installer. A language-selection dialog will be displayed; if the desired language is not avail- able, click Region Selection to choose a different region and then choose the desired language (region selection is not available in the European release).

2 Start the installer. Click Install and follow the on-screen instructions.

3 Exit the installer. Click Yes (Windows) or OK (Mac OS) when installation is com- plete. The following software is installed: ViewNX 2 Short Movie Creator

4 Remove the installer CD from the CD-ROM drive.

Installing the Supplied Software

A Supplied Software Be sure to update to the latest versions of the supplied software. Nikon Message Center 2 will periodically check for updates while the computer is connected to the Internet.

103

Q

System Requirements The system requirements for ViewNX 2 are:

Windows

CPU

Photos: Intel Celeron, Pentium 4, Core Series; 1.6 GHz or better

Movies (playback): Pentium D 3.0 GHz or better; Intel Core i5 or better recommended when viewing movies with a frame size of 1280 720 or more at a frame rate of 30 fps or above or movies with a frame size of 1920 1080 or more

Movies (editing): Intel Core i5 or better

OS Pre-installed versions of Windows 8, Windows 7, Windows Vista, or Windows XP; note that 64-bit versions of Windows XP are not supported

Memory (RAM)

32-bit Windows 8, Windows 7, or Windows Vista: 1 GB or more (2 GB or more recommended)

64-bit Windows 8, Windows 7, or Windows Vista: 2 GB or more (4 GB or more recommended)

Windows XP: 512 MB or more (2 GB or more recommended) Hard disk

space A minimum of 1 GB available on the startup disk (3 GB or more recom- mended)

Graphics Resolution: 1024 768 pixels (XGA) or more (1280 1024 pixels or more

recommended) Color: 24-bit color (True Color) or more

Mac OS

CPU

Photos: Intel Core or Xeon series Movies (playback): Core Duo 2 GHz or better; Intel Core i5 or

better recommended when viewing movies with a frame size of 1280 720 or more at a frame rate of 30 fps or above or movies with a frame size of 1920 1080 or more

Movies (editing): Intel Core i5 or better OS OS X 10.8 or 10.7; Mac OS X 10.6

Memory (RAM)

OS X 10.8 or 10.7: 2 GB or more (4 GB or more recommended) Mac OS X 10.6: 1 GB or more (4 GB or more recommended)

Hard disk space

A minimum of 1 GB available on the startup disk (3 GB or more rec- ommended)

Graphics Resolution: 1024 768 pixels (XGA) or more (1280 1024 pixels or

more recommended) Color: 24-bit color (millions of colors) or more

104

Q

AMotion Snapshots ViewNX 2 is required to view Motion Snapshots saved using the File format > NMS files option in the shooting menu (0 99).

A Supported Operating Systems See the websites listed on page 19 for the latest information on sup- ported operating systems.

105

Q

Transferring Pictures

1 Choose how pictures will be copied to the computer. Choose one of the following methods: Direct USB connection: Turn the camera

off and ensure that the memory card is inserted in the camera. Unlock (q), unlatch (w), and open (e) the connector cover and then connect the camera to the computer using the supplied USB cable (do not use force or insert the connectors at an angle) and then turn the camera on.

SD card slot: If your computer is equipped with an SD card slot, the card can be inserted directly in the slot.

SD card reader: Connect a card reader (available separately from third-party suppliers) to the computer and insert the memory card.

Viewing and Editing Pictures on a Computer

106

Q

2 Start the Nikon Transfer 2 component of ViewNX 2. If a message is displayed prompting you to choose a pro- gram, select Nikon Transfer 2.

3 Click Start Transfer. At default settings, all the pictures on the memory card will be copied to the computer.

4 Terminate the connection. If the camera is connected to the computer, turn the camera off and disconnect the USB cable. If you are using a card reader or card slot, choose the appropriate option in the com- puter operating system to eject the removable disk corre- sponding to the memory card and then remove the card from the card reader or card slot.

AWindows 7 If the following dialog is displayed, select Nikon Transfer 2 as described below.

1 Under Import pictures and videos, click Change pro- gram. A program selection dialog will be displayed; select Import File using Nikon Transfer 2 and click OK.

2 Double-click Import file.

Click Start Transfer

107

Q

Viewing Pictures Pi c t u r e s a r e d i s p l aye d i n ViewNX 2 when transfer is com- plete.

Retouching Photographs To crop pictures and perform such tasks as adjusting sharp- ness and tone levels, click the Edit button in the toolbar.

Printing Pictures Click the Print button in the toolbar. A dialog will be dis- played, allowing you to print pictures on a printer connected to the computer.

A Starting ViewNX 2 Manually Windows: Double-click the

ViewNX 2 shortcut on the desk- top.

Mac OS: Click the ViewNX 2 icon in the Dock.

A For More Information Consult online help for more infor- mation on using ViewNX 2.

n

108

n

Technical Notes Read this chapter for information on compatible accessories, cleaning and storing the camera, and what to do if an error mes- sage is displayed or you encounter problems using the camera.

At the time of writing, the following accessories were available for your camera.

Optional Accessories

Lenses Waterproof 1 mount lenses 1 mount lenses: Attach the supplied O-ring protector when

using non-waterproof 1 mount lenses (0 110). Mount adapters

Mount Adapter FT1: When using the FT1, attach the supplied O- ring protector.

O-rings O-Ring WP-O2000: O-rings help maintain a waterproof seal when a special-purpose waterproof lens is attached. Grease O-rings before first use (0 73).

O-ring protectors

O-Ring Protector PA-N1000: Protects the O-ring when a non- waterproof 1 NIKKOR lens is attached (0 110).

O-ring removers

O-Ring Remover WP-OR1000: Remove O-rings (0 73).

Silicon grease

Silicon Grease WP-G1000: Ensures that special-purpose water- proof lenses rotate freely during attachment and removal.

Power sources

Rechargeable Li-ion Battery EN-EL20 (0 3132): Additional EN-EL20 batteries are available from local retailers and Nikon-authorized service representatives.

Battery Charger MH-27 (0 31): Recharge EN-EL20 batteries. Power Connector EP-5C, AC Adapter EH-5b: These accessories can

be used to power the camera for extended periods (EH-5a and EH-5 AC adapters can also be used). An EP-5C power connector is required to connect the camera to the EH-5b, EH-5a, or EH-5.

Body caps Body Cap BF-N2000: The body cap keeps the dust shield free of dust when a lens is not in place.

109

n

Wireless mobile adapters

Wireless Mobile Adapter WU-1b: Supports two-way communica- tion between the camera and smart devices running the Wireless Mobile Utility app. Use the Wireless Mobile Utility to take pictures remotely or download existing pictures to the smart device.

AOptional Accessories Availability may vary with country or region. See our website or bro- chures for the latest information.

110

n

Non-Waterproof 1 NIKKOR Lenses The supplied O-ring protector must be attached to the camera lens mount before the camera can be used with non-waterproof 1 NIKKOR lenses like the 1 NIKKOR VR 1030mm f/3.55.6 shown in the illustrations below. Use a soft cloth to remove any foreign matter from the inside of the protector before use, and be care- ful to prevent dust entering the camera or adhering to the O- ring protector.

Remove the rear lens cap

Remove the camera body cap

Remove the O-ring protector from the body cap

Place the O-ring protector over the O-ring

111

n

If the lens supports vibration reduction (VR), vibration reduction can be con- trolled from the camera (0 99). Note that lenses with retractable lens barrel but- tons can not be used when retracted. To unlock and extend the lens readying the camera for use, keep the retractable lens barrel button pressed (q) while rotating the zoom ring as shown (w).

Mounting mark (camera)

Mounting mark (lens)

Keeping the mounting marks aligned, position the lens on the camera

Rotate the lens as shown until it clicks into place.

Zoom ring

Retractable lens barrel button

112

n

ADetaching Non-Waterproof Lenses Before removing or exchanging lenses, turn the camera off. To remove the lens, press and hold the lens release button (q) while turn- ing the lens as shown (w). After removing the O-ring protector from the camera, clean any foreign matter from the O-ring and replace the lens caps and camera body cap, and then clean the O-ring protector with a soft cloth and place the pro- tector on the front of the body cap.

A Lenses with Retractable Lens Barrel Buttons The camera will turn on automatically when the retractable lens barrel lock is released; in addition, if the view through the lens is dis- played or the monitor is off, the camera will turn off when the lens barrel is locked (in the case of 1 NIKKOR VR 1030mm f/3.55.6 and 1 NIKKOR VR 30110mm f/3.85.6 lenses, firmware version 1.10 or later is required if locking the lens barrel is to turn the camera off when the monitor is off; for information on updating lens firmware, visit the Nikon website for your area).

The lens can be retracted and the zoom ring locked by pressing the retractable lens barrel button and rotating the ring in the opposite direction. Be careful not to press the retractable lens barrel button while attaching or removing the lens.

113

n

Approved Memory Cards The following cards have been tested and approved for use in the camera. Cards with class 6 or faster write speeds are recom- mended for movie recording. Recording may end unexpectedly when cards with slower write speeds are used.

1 Check that any card readers or other devices with which the card will be used support 2 GB cards.

2 Check that any card readers or other devices with which the card will be used are SDHC-compliant. The camera supports UHS-1.

3 Check that any card readers or other devices with which the card will be used are SDXC-compliant. The camera supports UHS-1.

Other cards have not been tested. For more details on the above cards, please contact the manufacturer.

SD cards SDHC cards 2 SDXC cards 3

SanDisk 2 GB 1 4 GB, 8 GB, 16 GB, 32 GB

64 GB Toshiba

Panasonic 48 GB, 64 GB Lexar Media

4 GB, 8 GB, 16 GB

Platinum II

4 GB, 8 GB, 16 GB, 32 GB Professional

Full-HD Video 4 GB, 8 GB, 16 GB

114

n

Underwater Use For information on cleaning the camera after use under water or on the seashore, see page 71.

Storage If the camera will not be used for an extended period, remove the battery and store it in a cool, dry area with the terminal cover in place. To prevent mold or mildew, store the camera in a dry, well-ventilated area. Do not store your camera with naphtha or camphor moth balls or in locations that: are poorly ventilated or subject to humidities of over 60% are next to equipment that produces strong electromagnetic

fields, such as televisions or radios are exposed to temperatures above +50 C (122 F) or below

10 C (14 F)

Cleaning

Do not use alcohol, thinner, or other volatile chemicals.

Storage and Cleaning

Camera body

Use a blower to remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or sea- side, wipe off sand or salt with a cloth lightly dampened in distilled water and dry thoroughly. Important: Dust or other foreign matter inside the camera may cause damage not cov- ered under warranty.

Lens

Lenses are easily damaged. Remove dust and lint with a blower. If using an aerosol blower, keep the can vertical to prevent the discharge of liquid. To remove fingerprints and other stains, apply a small amount of lens cleaner to a soft cloth and clean with care.

Monitor

Remove dust and lint with a blower. When removing finger- prints and other stains, wipe the surface lightly with a soft cloth or chamois leather. Do not apply pressure, as this could result in damage or malfunction.

Dust shield The dust shield is easily damaged. Remove dust and lint with a blower.

115

n

Before using the camera, read the warnings on pages 714. Read pages 6176 before using the camera under water.

Do not drop: The product may mal- function if subjected to strong shocks or vibration.

Avoid sudden changes in temperature: Sudden changes in temperature, such as those that occur when entering or leaving a heated build- ing on a cold day, can cause con- densation inside the device. To prevent condensation, place the device in a carrying case or plastic bag before exposing it to sudden changes in temperature.

Keep away from strong magnetic fields: Do not use or store this device in the vicinity of equipment that gen- erates strong electromagnetic radi- ation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the display, damage data stored on the memory card, or affect the products internal cir- cuitry.

Keep the lens mount covered: Be sure to attach the body cap if the camera is without a lens.

Do not touch the dust shield: The dust shield covering the image sensor is easily damaged. Under no circum- stances should you exert pressure on the shield or poke it with clean- ing tools. These actions could

scratch or otherwise damage the shield.

Turn the product off before removing or disconnecting the power source: Do not unplug the product or remove the battery while the product is on or while images are being recorded or deleted. Forcibly cutting power in these circumstances could result in loss of data or in damage to prod- uct memory or internal circuitry. To prevent an accidental interruption of power, avoid carrying the prod- uct from one location to another while the AC adapter is connected.

Cleaning: When cleaning the camera body, use a blower to gently remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off any sand or salt using a cloth lightly dampened in pure water and then dry the cam- era thoroughly.

Lenses are easily damaged. Dust and lint should be gently removed with a blower. When using an aero- sol blower, keep the can vertical to prevent discharge of liquid. To remove fingerprints and other stains from the lens, apply a small amount of lens cleaner to a clean, soft cloth and wipe the lens care- fully.

Caring for the Camera and Battery: Cautions

116

n

Storage: To prevent mold or mildew, store the camera in a cool, dry, well-ventilated area. If you are using an AC adapter, unplug the adapter to prevent fire. If the prod- u c t w i l l n o t b e u s e d f o r a n extended period, remove the bat- tery to prevent leakage and store the camera in a plastic bag contain- ing a desiccant. Do not, however, store the camera case in a plastic bag, as this may cause the material to deteriorate. Note that desiccant gradually loses its capacity to absorb moisture and should be replaced at regular intervals.

To prevent mold or mildew, take the camera out of storage at least once a month. Turn the camera on and release the shutter a few times before putting it away.

Store the battery in a cool, dry place. Replace the terminal cover before putting the battery away.

Notes on the monitor: The monitor is constructed with extremely high precision; at least 99.99% of pixels are effective, with no more than 0.01% being missing or defective. Hence while these displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is not a mal- function and has no effect on images recorded with the device.

Images in the monitor may be diffi- cult to see in a bright light.

Do not apply pressure to the dis- play, as this could cause damage or malfunction. Dust or lint on the display can be removed with a blower. Stains can be removed by wiping lightly with a soft cloth or chamois leather. Should the moni- tor break, care should be taken to avoid injury from broken glass and to prevent liquid crystal from the display touching the skin or enter- ing the eyes and mouth.

Do not leave the lens pointed at the sun: Do not leave the lens pointed at the sun or other strong light source for an extended period. Intense light may cause the image sensor to deteriorate or produce a white blur effect in photographs.

Moir: Moir is an interference pat- tern created by the interaction of an image containing a regular, repeating grid, such as the pattern of weave in cloth or windows in a building, with the camera image sensor grid. In some cases, it may appear in the form of lines. If you notice moir in your photographs, try changing the distance to the subject, zooming in and out, or changing the angle between the subject and the camera.

Lines: Noise in the form of lines may in rare cases appear in pictures of extremely bright or backlit sub- jects.

117

n

Batteries: Batteries may leak or explode if improperly handled. Observe the following precautions when handling batteries: Use only batteries approved for

use in this equipment. Do not expose the battery to

flame or excessive heat. Keep the battery terminals clean. Turn the product off before

replacing the battery. Remove the battery from the

camera or charger when not in use and replace the terminal cover. These devices draw minute amounts of charge even when off and could draw the battery down to the point that it will no longer function. If the battery will not be used for some time, insert it in the camera and run it flat before removing it and storing it in a location with an ambient temper- ature of 15 C to 25 C (59 F to 77 F; avoid hot or extremely cold locations). Repeat this process at least once every six months.

Turning the camera on and off repeatedly when the battery is fully discharged will shorten bat- tery life. Batteries that have been fully discharged must be charged before use.

The internal temperature of the battery may rise while the battery is in use. Attempting to charge the battery while the internal temperature is elevated wil l impair battery performance, and the battery may not charge or charge only partially. Wait for the battery to cool before charging.

Continuing to charge the battery after it is fully charged can impair battery performance.

A marked drop in the time a fully charged battery retains its charge when used at room temperature indicates that it requires replace- ment. Purchase a new EN-EL20 battery.

Charge the battery before use. When taking photographs on important occasions, ready a spare EN-EL20 battery and keep it fully charged. Depending on your location, it may be difficult to pur- chase replacement batteries on short notice. Note that on cold days, the capacity of batteries tends to decrease. Be sure the battery is fully charged before taking photographs outside in cold weather. Keep a spare bat- t e r y i n a w a r m p l a c e a n d exchange the two as necessary. Once warmed, a cold battery may recover some of its charge.

Used batteries are a valuable resource; recycle in accord with local regulations.

118

n

Do not use the battery at ambient temperatures below 0C (32F) or above 40 C (104 F); failure to observe this precaution could damage the battery or impair its performance. Capacity may be reduced and charging times may increase at battery temperatures from 0 C (32 F) to 10 C (50 F) and from 45 C (113 F) to 60 C (140 F); the batter y wil l not charge if its temperature is below 0C (32F) or above 60C (140F).

The battery charger: Charge the bat- tery at ambient temperatures between 5 C (41 F) and 35 C (95 F). If the CHARGE lamp flashes quickly during charging, cease use immediately and take battery and charger to your retailer or a Nikon- authorized service representative.

Do not move the charger or touch the battery during charging. Fail- ure to observe this precaution could in very rare instances result in the charger showing that charg- ing is complete when the battery is only partially charged. Remove and reinsert the battery to begin charg- ing again.

Use the charger with compatible batteries only. Unplug when not in use.

Memory Cards: The camera stores pictures on SD,

SDHC, and SDXC memory cards (available separately).

Do not remove memory cards from the camera, turn the camera off, or remove or disconnect the power source during formatting or while data are being recorded, deleted, or copied to a computer. Failure to observe these precau- tions could result in loss of data or in damage to the camera or card.

Do not touch the card terminals w i t h y o u r f i n g e r s o r m e t a l objects.

Do not bend, drop, or subject to strong physical shocks.

Do not apply force to the card casing. Failure to observe this pre- caution could damage the card.

Do not expose to water, heat, high levels of humidity, or direct sunlight.

Do not format memory cards in a computer.

D Servicing the Camera and Accessories The camera is a precision device and requires regular servicing. Nikon recommends that the camera be inspected by the original retailer or Nikon-authorized service representative once a year, and that it be ser- viced once every three to five years (note that fees apply to these ser- vices). Frequent inspection and servicing are particularly recommended if the camera is used professionally. Any accessories regularly used with the camera, such as lenses, should be included when the camera is inspected or serviced.

119

n

If the camera fails to function as expected, check this list of com- mon problems before consulting your retailer or Nikon repre- sentative.

Battery/Display

Shooting (All Modes)

Troubleshooting

The camera is on but does not respond: Controls are locked (0 101). The camera is busy. Wait for recording or any other processing to end.

If the problem persists, turn the camera off. If the camera still does not respond, remove and replace the battery or disconnect and reconnect the AC adapter, but note that this will delete any data not yet saved. Data already saved to the memory card are unaffected.

The display is off: The camera is off (0 36) or the battery is exhausted (0 24, 31). The display has turned off automatically to save power. The display can

be reactivated by pressing the shutter-release button. The camera is connected to a computer (0 105) or television. The camera turns off without warning: The battery is low (0 24, 31). The display has turned off automatically to save power (0 46). The dis-

play can be reactivated by pressing the shutter-release button. The cameras internal temperature is high (0 18, 122). Wait for the

camera to cool before turning it on again. Indicators are not displayed: Press the $ button (0 25).

The camera takes time to turn on: Delete files or format the memory card. The shutter-release is disabled: The battery is exhausted (0 24, 31). The memory card is locked or full. The flash is charging (0 91). The camera is not in focus (0 42). You are currently filming a slow-motion movie (0 80). Only one picture is taken each time the shutter-release button is pressed in continuous release mode: 5 fps is selected for Continuous/self-timer and the built-in flash is raised. Smudges appear in photographs: Clean the front and rear lens elements or the dust shield (0 114).

120

n

Movies

Playback

Miscellaneous

Flicker or banding appears in movies or in the display: Choose a Flicker reduc- tion setting that matches the local AC power supply (0 101). No flash: See page 94. The flash will not fire when off (0 92) or when low- ered. Menu items are unavailable: Some options are only available in particular shooting or exposure modes or when wireless mobile adapter is attached.

Cannot record movies: The movie-record button can not be used to record movies in best moment capture or Motion Snapshot mode. No sound is recorded for movies: Microphone off is selected for Movie sound options > Microphone

(0 100). Live audio is not recorded with slow-motion movies (0 83) or Motion

Snapshots.

Tall (portrait) orientation photos are displayed in wide (landscape) orientation: Select On for Rotate tall (0 98). The photos were taken with Auto image rotation off (0 101). Camera was pointed up or down when the photo was taken. Photo is displayed in image review. Cannot hear movie sound: Press the X button to raise the volume (0 81). If the camera is con-

nected to a television, use the controls for the TV to adjust the volume. Live audio is not recorded with slow-motion movies (0 83) or Motion

Snapshots. Cannot delete images: Remove protection from the files before deletion. The memory card is locked.

The date of recording is not correct: Set the camera clock. Menu items are unavailable: Some options are only available at particular settings or when a memory card is inserted.

121

n

This section lists the error messages that appear in the display.

Error Messages

Message Solution

(Shutter-speed or aperture display flashes)

If the subject is too bright, lower ISO sensitivity or choose a faster shutter speed or smaller aper- ture (higher f-number). If the subject is too dark, raise ISO sensitivity, use the flash, or choose a slower shutter speed or larger aperture (lower f-number).

Keeping the zoom ring button pressed, rotate the zoom ring to extend the lens.

A lens with a retractable lens barrel button is attached with the lens barrel retracted. Keeping the retractable lens barrel button pressed, rotate the zoom ring to extend the lens.

Check lens. Pictures can only be taken when a lens is attached.

Attach a lens.

The clock has been reset.

Set the camera clock.

No memory card. Turn the camera off and confirm that the card is correctly inserted.

This memory card is not formatted. Format the memory card?

Select Yes to format the card, or turn the camera off and insert another memory card.

Memory card is locked (write protected).

Turn the camera off and slide the card write-pro- tect switch to the write position.

Memory card is full.

You may be able to record additional images if you reduce image quality or size.

Delete unwanted images. Insert another memory card.

122

n

This memory card cannot be used. Card may be damaged; insert a different card.

Use an approved card. Format the card. If the problem persists, the

card may be damaged. Contact a Nikon-autho- rized service representative.

Insert a new memory card.

Cannot create additional folders on memory card.

If the current folder is numbered 999 and contains either 999 photographs or a photograph num- bered 9999, the shutter-release button will be dis- abled and no further photographs can be taken. Choose Yes for Reset file numbering and then either format the current memory card or insert a new memory card.

The movie-record button cannot be used in this mode.

The movie-record button can not be used in best moment capture or Motion Snapshot modes.

Photographs cannot be recorded in this mode.

The shutter-release button can not be used to take photographs while a slow-motion movie is being recorded.

The cameras internal temperature is high. The camera will now turn off.

Wait for the camera to cool.

Memory card contains no images.

To view pictures, insert a memory card contain- ing images.

Cannot display this file. The file has been created or modified on a com- puter or different make of camera, or is corrupt.

Message Solution

123

n

Nikon 1 AW1 Digital Camera

Specifications

Type Type Digital camera with support for interchangeable

lenses Lens mount Nikon waterproof 1 mount Effective angle of view Approx. 2.7 lens focal length (35 mm format

equivalent)

Effective pixels 14.2 million

Image sensor Image sensor 13.2 mm 8.8 mm CMOS sensor (Nikon CX for-

mat)

Storage Image size (pixels) Still images (auto, best moment capture, and all creative

modes other than Easy panorama; aspect ratio 3 : 2) 4608 3072 3456 2304 2304 1536

Still images (Normal panorama, camera panned horizontally; aspect ratio 120 : 23)

4800 920 Still images (Normal panorama, camera panned vertically; aspect ratio 8 : 25)

1536 4800 Still images (Wide panorama, camera panned horizontally; aspect ratio 240 : 23)

9600 920 Still images (Wide panorama, camera panned vertically; aspect ratio 4 : 25)

1536 9600 Still images (taken during movie recording, aspect ratio 3 : 2)

4608 3072 (1080/60i, 1080/30p) 1280 856 (720/60p, 720/30p)

Still images (Motion Snapshots; aspect ratio 16 : 9) 4608 2592

124

n

File format NEF (RAW): 12-bit, compressed JPEG: JPEG-Baseline compliant with fine (approx.

1 : 4), normal (approx. 1 : 8), or basic (approx. 1 : 16) compression

NEF (RAW) + JPEG: Single photograph recorded in both NEF (RAW) and JPEG formats

Picture Control system Standard, Neutral, Vivid, Monochrome, Portrait, Landscape; selected Picture Control can be mod- ified; storage for custom Picture Controls

Media SD (Secure Digital), SDHC, and SDXC memory cards File system DCF (Design Rule for Camera File System) 2.0, DPOF (Digi-

tal Print Order Format), Exif (Exchangeable Image File Format for Digital Still Cameras) 2.3, PictBridge

Shooting modes C auto; w creative, with a choice of the follow- ing options: P, S, A, M, 4 (5, 6) underwater, j night landscape, o night portrait, m backlight- ing, p easy panorama, q soft, r miniature effect, and s selective color; u best moment capture (t slow view and y Smart Photo Selector), v advanced movie (HDP, S, A, M onlyand y slow motion), z Motion Snapshot

Shutter Type Electronic shutter Speed 1/16,000 30 s in steps of 1/3 EV; Bulb

Note: Bulb ends automatically after approximately 2 minutes Flash sync speed Synchronizes with shutter at X=1/60 s or slower

Release Mode Single frame, continuous

Self-timer Frame advance rate Approx. 5, 15, 30, or 60 fps Self-timer 2 s, 5 s, 10 s

125

n

Exposure Metering TTL metering using image sensor Metering method Matrix

Center-weighted: Meters 4.5 mm circle in center of frame

Spot: Meters 2 mm circle centered on selected focus area

Mode P programmed auto with flexible program; S shutter-priority auto; A aperture-priority auto; M manual; h scene auto selector

Exposure compensation 3+3 EV in increments of 1/3 EV Exposure lock Luminosity locked at metered value when shut-

ter-release button is pressed halfway ISO sensitivity (Recommended Exposure Index)

ISO 1606400 in steps of 1 EV; auto ISO sensitiv- ity control (ISO 1606400, 1603200, 160800) available (user controlled when P, S, A, M, or underwater is selected in cre- ative mode)

Active D-Lighting On, off

Focus Autofocus Hybrid autofocus (phase-detection/contrast-

detect AF); AF-assist illuminator Lens servo Autofocus (AF): Single AF (AF-S); continuous AF

(AF-C); auto AF-S/AF-C selection (AF-A); full- time AF (AF-F)

Manual focus (MF) AF-area mode Single-point, single-point (center), auto-area,

subject tracking Focus area Single-point AF: 135 focus areas; the center 73

areas support phase-detection AF Auto-area AF: 41 focus areas

Focus lock Focus can be locked by pressing shutter-release button halfway (single AF)

Face priority On, off

126

n

Flash Built-in flash Manual pop-up Guide Number (GN) Approx. 5/16 (m/ft, ISO 100, 20 C/68 F; at ISO

160, Guide Number is approx. 6.3/20.7) Control i-TTL flash control using image sensor Mode Fill flash, red-eye reduction, fill flash + slow sync,

red-eye reduction + slow sync, rear curtain + slow sync, rear-curtain sync, off

Flash compensation 3+1 EV in increments of 1/3 EV Flash-ready indicator Lights when built-in flash unit is fully charged

White balance Auto, underwater, incandescent, fluorescent, direct sunlight, flash, cloudy, shade, preset man- ual, all except preset manual with fine tuning

Movie Metering TTL metering using image sensor Metering method Matrix

Center-weighted: Meters 4.5 mm circle in center of frame

Spot: Meters 2 mm circle centered on selected focus area

Frame size (pixels)/ recording rate

HD movies (aspect ratio 16 : 9) 1920 1080/60i (59.94 fields/s *) 1920 1080/30p (29.97 fps) 1280 720/60p (59.94 fps) 1280 720/30p (29.97 fps)

Slow-motion movies (aspect ratio 8 : 3) 640 240/400 fps (plays at 30p/29.97 fps) 320 120/1200 fps (plays at 30p/29.97 fps)

Motion Snapshot (aspect ratio 16 : 9) 1920 1080/60p (59.94 fps) (plays at 24p/23.976 fps)

File format MOV Video compression H.264/MPEG-4 Advanced Video Coding Audio recording format AAC Audio recording device Built-in stereo microphone; sensitivity adjustable

* Sensor output is about 60 fps.

127

n

Monitor 7.5 cm (3-in.), approx. 921k-dot, TFT LCD with brightness adjustment

Playback Full-frame and thumbnail (4, 9, or 72 images or calendar) playback with playback zoom, movie and panorama playback, slide show, histogram display, auto image rotation, and rating option

Interface USB Hi-Speed USB HDMI output Type C mini-pin HDMI connector

Electronic compass/location data/altimeter/depth gauge Electronic compass 16 headings (with 3-axis accelerometer attitude

correction and automatic offset adjustment) Location data Receiving frequency: 1575.4200 MHz (GPS)/

1598.06251605.3750 MHz (GLONASS) Geodesics: WGS84

Altimeter Operating range approximately 500+4500 m (1640+14,760 ft)

Depth gauge Operating range approximately 020 m (065.6 ft)

Supported languages Arabic, Bengali, Bulgarian, Chinese (Simplified and Traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hindi, Hungar- ian, Indonesian, Italian, Japanese, Korean, Mar- athi, Norwegian, Persian, Polish, Portuguese (European and Brazilian), Romanian, Russian, Ser- bian, Spanish, Swedish, Tamil, Telugu, Thai, Turk- ish, Ukrainian, Vietnamese

Power source Battery One rechargeable Li-ion EN-EL20 battery AC adapter EH-5b AC adapter; requires EP-5C power connec-

tor (available separately)

Tripod socket 1/4-in. (ISO 1222)

Dimensions/weight Dimensions (W H D) Approx. 113.3 71.5 37.5 mm (4.5 2.9 1.5 in.),

excluding projections Weight Approx. 356 g (12.6 oz) with battery and memory

card but without body cap or O-ring protector; approx. 313 g (11.1 oz), camera body only

128

n

1 Does not apply when built-in flash is raised. 2 With special-purpose waterproof lens attached. 3 Using a test method derived from MIL-STD-810F Method 516.5: Shock, the

product is dropped from a height of 200 cm (6.6 ft) onto a plywood surface 5 cm (2 in.) thick. Exterior deformation and surface damage are not tested. These in-house tests do not constitute blanket guarantees of invulnerabil- ity to damage or destruction.

Unless otherwise stated, all figures are for a camera with a fully-charged bat- tery operating at the temperature specified by the Camera and Imaging Products Association (CIPA): 23 3 C (73.4 5.4 F).

Nikon reserves the right to change the specifications of the hardware and software described in this manual at any time and without prior notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain.

Operating environment Temperature 10 C+40 C (+14 F104 F) on land, 0 C

+40 C (+32 F104 F) in water Humidity 85% or less (no condensation)

Shock-, water-, and dust-proofing Shockproof performance 1, 2

Has passed in-house tests 3 to MIL-STD-810F Method 516.5: Shock standard

Waterproof performance 2

In-house tests have demonstrated JIS/IEC Class 8 (IPX8) waterproofing; can be used at depths of up to 15 m (49 ft) for up to 60 minutes

Operating depth 2 Maximum 15 m (49 ft) Dustproof performance 2 In-house tests have demonstrated JIS/IEC Class 6

(IP6X) dust-proofing

MH-27 battery charger Rated input AC 100240 V, 5060 Hz, 0.2 A Rated output DC 8.4 V/0.6 A Supported batteries Nikon EN-EL20 rechargeable Li-ion batteries Charging time Approx. 2 hours at an ambient temperature of

25 C (77 F) when no charge remains Operating temperature 0 C40 C (+32 F104 F) Dimensions (W H D) Approx. 67.0 28.0 94.0 mm (2.6 1.1 3.7 in.),

excluding plug adapter Weight Approx. 83 g (2.9 oz), excluding plug adapter

129

n

* When attached to waterproof cameras.

EN-EL20 rechargeable Li-ion battery Type Rechargeable lithium-ion battery Rated capacity 7.2 V, 1020 mAh Operating temperature 0 C40 C (+32 F104 F) Dimensions (W H D) Approx. 30.7 50.0 14.0 mm (1.2 2.0 0.6 in.) Weight Approx. 41 g (1.4 oz), excluding terminal cover

1 NIKKOR AW 1127.5mm f/3.55.6 Lens Type Waterproof 1 mount lens Focal length 1127.5 mm Maximum aperture f/3.55.6 Construction 8 elements in 6 groups (including 1 ED lens element and

1 aspherical lens element), 1 protective glass element Angle of view 7232 20 Minimum focus distance 0.3 m (1.0 ft) from focal plane at all zoom positions Diaphragm blades 7 (rounded diaphragm opening) Diaphragm Fully automatic Aperture range 11 mm focal length: f/3.516

27.5 mm focal length: f/5.616 Electronic compass Electronic compass can be used when lens is

attached to camera Filter-attachment size 40.5 mm (P = 0.5 mm) Shockproof performance *

Has passed in-house tests to MIL-STD-810F Method 516.5: Shock standard when attached to camera; exterior deformation and surface dam- age are not tested

Waterproof performance *

In-house tests have demonstrated JIS/IEC Class 8 (IPX8) waterproofing

Operating depth * Maximum 15 m (49 ft), but may not be used at depths that exceed cameras maximum operat- ing depth

Dustproof performance * In-house tests have demonstrated JIS/IEC Class 6 (IP6X) dust-proofing

Operating temperature 10 C+40 C (+14 F104 F) on land, 0 C +40 C (+32 F104 F) in water

Dimensions Approx. 63 mm diameter 56.5 mm (distance from camera lens mount flange)

Weight Approx. 182 g (6.5 oz)

130

n

* When attached to waterproof cameras.

Specifications subject to change without notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain.

1 NIKKOR AW 10mm f/2.8 Lens Type Waterproof 1 mount lens Focal length 10 mm Maximum aperture f/2.8 Construction 6 elements in 5 groups (including 2 aspherical lens elements),

1 protective glass element Angle of view 77 Minimum focus distance 0.2 m (0.7 ft) from focal plane Diaphragm blades 7 (rounded diaphragm opening) Diaphragm Fully automatic Aperture range f/2.811 Electronic compass Electronic compass can be used when lens is

attached to camera Filter-attachment size 40.5 mm (P = 0.5 mm) Shockproof performance *

Has passed in-house tests to MIL-STD-810F Method 516.5: Shock standard when attached to camera; exterior deformation and surface dam- age are not tested

Waterproof performance *

In-house tests have demonstrated JIS/IEC Class 8 (IPX8) waterproofing

Operating depth * Maximum 20 m (65.6 ft), but may not be used at depths that exceed cameras maximum operat- ing depth

Dustproof performance * In-house tests have demonstrated JIS/IEC Class 6 (IP6X) dust-proofing

Operating temperature 10 C+40 C (+14 F104 F) on land, 0 C +40 C (+32 F104 F) in water

Dimensions Approx. 61 mm diameter 30 mm (distance from cam- era lens mount flange)

Weight Approx. 118 g (4.2 oz)

131

n

Waterproof 1 NIKKOR Lenses 1 NIKKOR AW 1127.5mm f/3.55.6

1 NIKKOR AW 10mm f/2.8

Zoom ring Lens mounting mark

CPU contacts

Focal length mark Focal length scale

Lens cap

O-ring seal

Lens mounting mark

CPU contacts

Lens cap O-ring seal

132

n

Waterproof 1 NIKKOR lenses are exclusively for Nikon 1 AW1 interchangeable lens format digital cameras. The angle of view is equivalent to a 35 mm format lens with a focal length about 2.7 longer. When attached to a waterproof camera, the water-, dust-, and shock-proof 1 NIKKOR AW 1127.5mm f/3.55.6 and 1 NIKKOR AW 10mm f/2.8 lenses are compliant with the JIS/IEC Class 8 (IPX8) waterproofing standard, allowing the camera to be used at depths of up to 15 m (49 ft) for as long as 60 minutes at a time. They have also passed drop tests from a height of 2 m (6.6 ft) while attached to the camera. These lenses are not water-, dust-, or shock-proof when not attached to the camera. The forego- ing statement regarding water-, dust-, and shock-proofing is not a blanket guarantee that the product will be water- or dust-proof in all circumstances or invulnerable to damage or destruction. Use the zoom ring to zoom in and out.

A Lens Care Use only with hoods, lens caps, and other accessories designated for

use with this product. When using an optional lens hood, do not pick up or hold the lens or

camera using only the hood. Keep the CPU contacts and O-ring seal clean and immediately remove

any foreign matter with a blower. Contact a Nikon-authorized service representative should you notice

that the O-ring seal is cracked, deformed, or otherwise damaged. Use a blower to remove dust and lint from the lens surfaces. To avoid

scratches, do not use force when removing sand and other foreign objects.

Never use organic solvents such as paint thinner or benzene to clean the lens.

Attach the front and rear caps when the lens is not in use. If the lens will not be used for an extended period, store it in a cool,

dry location to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls.

Leaving the lens in extremely hot locations could damage or warp parts made from reinforced plastic.

The lens features a built-in O-ring that should be replaced at least once a year by a Nikon-authorized service representative, regardless how frequently the lens is used. A fee is charged for this service.

133

n

DUsing the Lens Under or Next to Water Never remove the lens under water. When attaching and removing the lens, carefully inspect the camera

O-ring and the lens O-ring seal to be sure that they are free of threads, lint, hair, dust, sand, liquids, and other foreign matter. Be sure that the camera O-ring is not protruding, twisted, or out of position.

Do not attach or remove the lens with wet or salt-covered hands or in areas exposed to spray, wind, sand, or dust.

Immediately remove any water or other foreign matter from the lens and lens O-ring seal with a clean, soft, dry cloth.

The amount of force needed to operate the zoom ring increases with depth.

Should the product leak, cease use immediately, dry the camera and lens, and take them to a Nikon-authorized service representative.

A Supplied Accessories 40.5 mm snap-on Front Lens Cap LC-N40.5 Rear Lens Cap LF-N2000

AOptional Accessories 40.5 mm screw-on Hood HN-N103 (attaches as shown below; note that the hood can not be used under water and that lens is not shockproof when hood is attached)

134

n

A Trademark Information Mac OS and OS X are registered trademarks of Apple Inc. in the United States and/or other countries. Microsoft, Windows, and Windows Vista are either registered trademarks, or trademarks of Microsoft Corpora- tion in the United States and/or other countries. The PictBridge logo is a trademark. The SD, SDHC, and SDXC logos are trademarks of SD-3C, LLC. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

All other trade names mentioned in this manual or the other documen- tation provided with your Nikon product are trademarks or registered trademarks of their respective holders.

A FreeType License (FreeType2) Portions of this software are copyright 2013 The FreeType Project (http://www.freetype.org). All rights reserved.

AMIT License (HarfBuzz) Portions of this software are copyright 2013 The HarfBuzz Project (http://www.freedesktop.org/wiki/Software/HarfBuzz). All rights reserved.

135

n

Battery Life The number of shots or movie footage that can be recorded with fully-charged batteries varies with the condition of the battery, temperature, the interval between shots, and the length of time menus are displayed. Sample figures for EN-EL20 (1020 mAh) batteries are given below. Still images: Approximately 250 shots Movies: Approximately 55 minutes of HD footage at 1080/60i

Measured according to CIPA standards at 23 3 C (73.4 5.4 F) with the camera at default settings, a fully-charged battery, a 1 NIKKOR AW 1127.5mm f/3.55.6 lens, and a 16 GB Toshiba SD-E016GUX UHS-I SDHC card. Value for still images obtained under the following test conditions: photographs taken at intervals of 30 s with the built-in flash fired with every other shot and the camera turned off and then on after every ten shots. Value for movies obtained under the following test con- ditions: a series of 20 minute movies with a file size of up to 4 GB were recorded; recording was only interrupted when tem- perature warning was displayed.

The following can reduce battery life: Keeping the shutter-release button pressed halfway Repeated autofocus operations Taking NEF (RAW) photographs Slow shutter speeds Using a wireless mobile adapter or Eye-Fi cards Using vibration reduction mode with VR lenses Using zoom with power zoom lenses Using the location data or track log functions Setting monitor brightness to Hi

To ensure that you get the most from rechargeable Nikon EN-EL20 batteries: Keep the battery contacts clean. Soiled contacts can reduce

battery performance. Use batteries immediately after charging. Batteries will lose

their charge if left unused.

136

n

Symbols C (Auto mode) ........................... 28, 40 w (Creative mode) .................. 28, 49 u (Best moment capture mode) 28 v (Advanced movie mode) ..29, 77 z (Motion Snapshot mode) ..........27 P (Programmed auto) ......... 50, 52, 77 S (Shutter-priority auto) .... 50, 53, 77 A (Aperture-priority auto) . 50, 54, 77 M (Manual) ............................. 50, 55, 77 j (Night landscape) ......................... 50 o (Night portrait) ..............................51 m (Backlighting) ......................... 51, 57 p (Easy panorama) ................... 51, 58 q (Soft) ..................................................51 r (Miniature effect) ......................... 51 s (Selective color) ............................ 51 y (Slow motion) ............................... 83 c (Portrait) ......................................... 46 d (Landscape) ...................................46 f (Night portrait) ............................ 46 e (Close up) ....................................... 46 g (Night landscape) .......................46 Z (Auto) .............................................. 46 U (flexible program) ......................... 52 G (menu) button ................. 26, 98 K (playback) button ........................ 44 O (delete) button .......................45, 82 X (playback zoom in) button ........ 44 W (playback zoom out/thumbnail) button .................................................44 $ (display) button ......................25 J (OK) button .............................22, 60 C (action) button .............................95 & (feature) ...................... 29, 47, 49, 83 C (continuous shooting/self-timer) . 87, 89 N (flash-ready indicator) .................91

A AC adapter ........................................108 Accessories ........................................108 Advanced movie mode .... 29, 77, 83 Aperture ........................................ 54, 55 Aperture-priority auto ...... 50, 54, 77 Attaching the lens ...................33, 110 Auto mode ................................... 28, 40 Auto power off ................................... 46 Automatic scene selection ............ 46

B Backlighting ................................. 51, 57 Battery ..................................31, 32, 129 Beep ................................................ 42, 89 Best moment capture mode ......... 28 Body cap ..............................20, 21, 108 Built-in flash ........................................ 91

C Charging a battery ........................... 31 Clock ...................................................... 37 Close up ............................................... 46 Close up (Underwater mode) ....... 66 Compatible lens ..............................108 Computer ..........................................102 Creative mode .................................... 49

D Date and time .................................... 37 Date format ......................................... 37 Daylight saving time ........................ 37 Delete ............................................. 45, 82 Depth gauge ...................................... 68 Dust shield .............................. 114, 115

E Easy panorama ........................... 51, 58 Exposure indicator ........................... 56

Index

137

n

F Face priority .........................................46 Fill flash .................................................92 Flash .......................................................91 Flash mode ..........................................92 Flash range ..........................................94 Flash-ready indicator .......................91 Flexible program ...............................52 Focal length .........................................41 Focal length scale .................... 41, 131 Focal plane mark ...............................21 Focus area ............................................42 Format ...................................................32 Format memory card .......................32 Full-frame playback ..........................44

G Grid display ..........................................43

H H.264 ................................................... 126 HD movies .....................................77, 78 HDR ........................................................57

L Landscape ............................................46 Language .............................................37 Lens .................... 33, 41, 108, 129, 130 Lens cap .........................................33, 35 Live image control ............................47 Location data ......................................14

M Manual ....................................50, 55, 77 Maximum aperture ...............129, 130 Memory card ............................. 32, 113 Memory card access lamp .............43 Microphone .........................................79 Miniature effect ..................................51 Monitor ..........................................24, 25 Motion Snapshot mode ..................27 Mount adapter ................................ 108 Movie-record button ................79, 84

Movies ................................................... 77

N Night landscape ......................... 46, 50 Night portrait .............................. 46, 51 Nikon Transfer 2 ...............................106 Non-waterproof lenses .................110

O O-Ring ...................................33, 73, 108 O-ring protector ..............................110 Outdoor display ................................. 97

P Playback ............................................... 44 Portrait .................................................. 46 Power connector .............................108 Power switch ...................................... 36 Press the shutter-release button all the way down ................................... 43

Press the shutter-release button halfway ................................................ 42

Programmed auto .............. 50, 52, 77

R Rear curtain + slow sync ................. 92 Rear-curtain sync .............................. 92 Red-eye reduction ............................ 92 Red-eye reduction + slow sync .... 92 Removing the lens from the camera 35, 112

Retractable lens barrel button ..111, 112

S Scene selection .................................. 50 Scuba ..................................................... 66 SD card ................................................113 Selective color .................................... 51 Self-timer ............................................. 89 Shock-proofing ........................... 10, 11 Short Movie Creator .......................102 Shutter speed .............................. 53, 55 Shutter-priority auto .......... 50, 53, 77

138

n

Shutter-release button .................... 42 Silicon grease ......................35, 75, 108 Size ............................................. 123, 126 Slow motion ........................................ 83 Slow view ............................................. 28 Smart Photo Selector .......................28 Soft ......................................................... 51 Speaker .................................................22 Standard (Underwater mode) ...... 66 Strap for use exclusively on land . 31 System requirements .....................103

T Temperature warnings .................... 18 Theme ................................................... 98 Time .......................................................37 Timer ...................................................... 89

U Underwater (creative mode) ..50, 66 USB .......................................................105 USB cable ...........................................105

V ViewNX 2 ............................................102 Volume ..................................................81

W Water- and dust-proofing ....... 10, 11 Waterproof lenses .......... 33, 129, 130 Wireless mobile adapter ...............109

Z Zoom ring ......................... 41, 111, 131

139

n

140

n

Printed in Singapore SB3I01(11)

6MVA6011-01

No reproduction i

Manualsnet FAQs

If you want to find out how the 1 AW1 Nikon works, you can view and download the Nikon 1 AW1 User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Nikon 1 AW1 as well as other Nikon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Nikon 1 AW1. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Nikon 1 AW1 User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Nikon 1 AW1 User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Nikon 1 AW1 User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Nikon 1 AW1 User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Nikon 1 AW1 User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.