Contents

Nikon 1 J4 Reference Manual PDF

1 of 264
1 of 264

Summary of Content for Nikon 1 J4 Reference Manual PDF

DIGITAL CAMERA

Reference Manual

En

To get the most from your camera, please be sure to read all instructions thoroughly and keep them where they will be read by all who use the product.

Camera Settings The explanations in this manual assume that default settings are used.

Symbols and Conventions To make it easier to find the information you need, the following sym- bols and conventions are used:

The 1, 3, 4, and 2 symbols represent up, down, left, and right on the multi selector.

D This icon marks cautions; information that should be read before use to prevent damage to the camera.

A This icon marks notes; information that should be read before using the camera.

0 This icon marks references to other pages in this manual.

A For Your Safety Before using the camera for the first time, read the safety instructions in For Your Safety (0 xixiii).

i

Getting the Most from Your Camera 0 ii

Table of Contents 0 iv

s Introduction 0 1

z Taking and Viewing Photographs 0 28

y Recording and Viewing Movies 0 54

ROther Shooting Modes 0 63

tMore on Photography 0 79

TWi-Fi 0 93

IMore on Playback 0 103

Q Connections 0 114

o The Playback Menu 0 128

i The Shooting Menu 0 139

( The Movie Menu 0 164

) The Image Processing Menu 0 169

g The Setup Menu 0 183

n Technical Notes 0 192

ii

Getting the Most from Your Camera

Take photos with the shutter-release button. See page 6 for more informa- tion.

Shutter-release button

Shoot movies with the movie-record button. Movies can be recorded by pressing the movie-record but- ton in auto (0 28), creative (0 38), and advanced movie (0 54) modes.

Movie-record button

Download pictures to a computer. Install the supplied software (0 114), and copy photos and movies to your computer using ViewNX 2 (0 118).

View pictures in high definition. Use an HDMI cable to connect the camera to an HDTV (0 121).

iii

Accessories Expand your photographic horizons with a wide variety of inter- changeable lenses and other accessories (0 192).

Lenses Mount adapters

Software for Nikon digital cameras (available on CD)

Waterproof cases

iv

Getting the Most from Your Camera ......................................... ii Accessories .............................................................................................. iii

For Your Safety.............................................................................. xi Notices..........................................................................................xiv Wireless ........................................................................................xix

Introduction 1

Before You Begin ...........................................................................1 Parts of the Camera.......................................................................2 Using the Touch Screen..............................................................11 First Steps......................................................................................16

Taking and Viewing Photographs 28

Point-and-Shoot Photography (Auto Mode) .........................28 Viewing Photographs .........................................................................31 Deleting Pictures ..................................................................................32 Live Image Control...............................................................................36

Choosing a Creative Mode.........................................................38 Choosing a Mode That Matches the Subject or Situation.....39 Taking Photos in P, S, A, and M Modes ...........................................41 The Creative Palette ............................................................................47 HDR ...........................................................................................................48 Easy Panorama......................................................................................49 Selective Color.......................................................................................52 Cross Process .........................................................................................53

Recording and Viewing Movies 54

Recording Movies........................................................................54 Taking Photographs During Movie Recording..........................59 Viewing Movies.....................................................................................60 Deleting Movies....................................................................................61

Table of Contents

v

Other Shooting Modes 63

u Choosing the Moment (Best Moment Capture) ...............63 Choosing a Shot Manually (Active Selection)............................ 63 Choosing Your Moment (Slow View)............................................ 67 Letting the Camera Choose the Moment (Smart Photo

Selector).............................................................................................. 69 z Combining Photos with Brief Movie Vignettes (Motion

Snapshot Mode).....................................................................74 Viewing Motion Snapshots .............................................................. 78 Deleting Motion Snapshots ............................................................. 78

More on Photography 79

Continuous Mode........................................................................79 Self-Timer Modes ........................................................................81 Exposure Compensation ........................................................... 83 The Built-in Flash......................................................................... 84

Auto Pop-up Modes............................................................................ 84 Manual Pop-up Modes ...................................................................... 86

Tap Shooting Options ................................................................90 Auto Mode ............................................................................................. 90 Creative Mode....................................................................................... 90 Advanced Movie Mode ..................................................................... 91

Wi-Fi 93

What Wi-Fi Can Do for You........................................................ 93 Accessing the Camera ................................................................94

WPS (Android Only) ............................................................................ 95 PIN Entry (Android Only)................................................................... 96 SSID (Android and iOS)...................................................................... 97

Uploading Pictures to a Smart Device .................................... 99 Uploading Photos One at a Time................................................... 99 Uploading Multiple Selected Photos..........................................101

vi

More on Playback 103

Photo Information.................................................................... 103 Thumbnail Playback ................................................................ 106 Calendar Playback.................................................................... 107 Playback Zoom.......................................................................... 108 Deleting Pictures ...................................................................... 109

Deleting the Current Picture......................................................... 109 The Playback Menu .......................................................................... 109

Rating Pictures .......................................................................... 110 Slide Shows................................................................................ 111

Connections 114

Installing the Supplied Software........................................... 114 System Requirements...................................................................... 116

Viewing and Editing Pictures on a Computer ..................... 118 Transferring Pictures ........................................................................ 118 Viewing Pictures ................................................................................ 120

Viewing Pictures on TV............................................................ 121 High-Definition Devices.................................................................. 121

Printing Photographs .............................................................. 123 Connecting the Printer.................................................................... 123 Printing Pictures One at a Time.................................................... 124 Printing Multiple Pictures............................................................... 126 Creating a DPOF Print Order: Print Set ...................................... 127

The Playback Menu 128

Selecting Multiple Images.............................................................. 130 Image Review ............................................................................ 131 Rotate Tall .................................................................................. 131 Protect ........................................................................................ 131 Rating.......................................................................................... 131

vii

D-Lighting...................................................................................132 Resize...........................................................................................133 Crop .............................................................................................134 Face-Priority Zoom ...................................................................135 Edit Movie...................................................................................135 Combine 4-Second Movies......................................................137 Combine NMS Movies ..............................................................138

The Shooting Menu 139

Reset Shooting Options ...........................................................142 Exposure Mode..........................................................................142 Image Quality.............................................................................143 Image Size...................................................................................143 Active Selection.........................................................................146 Number of Shots Saved ...........................................................146 Movie Before/After ...................................................................147 File Format..................................................................................148 Soft...............................................................................................148 Toy Camera Effect .....................................................................149 Metering .....................................................................................149 Auto Distortion Control ...........................................................150 Color Space.................................................................................151 Active D-Lighting ......................................................................152 Long Exposure NR.....................................................................153 Optical VR ...................................................................................153 Electronic VR ..............................................................................154 Focus Mode ................................................................................155

Manual Focus ......................................................................................157 AF-Area Mode ............................................................................159

Focus Lock............................................................................................160

viii

Face-Priority .............................................................................. 161 Built-in AF Assist ....................................................................... 161 Flash Control ............................................................................. 162 Flash Compensation ................................................................ 163 Underwater Flash ..................................................................... 163

The Movie Menu 164

Reset Movie Options................................................................ 166 Slow Motion............................................................................... 166 Frame Size/Frame Rate............................................................ 167 Movie Sound Options .............................................................. 168 Auto Image Capture................................................................. 168

The Image Processing Menu 169

Reset Processing Options ....................................................... 170 White Balance............................................................................ 170

Fine-Tuning White Balance ........................................................... 171 Preset Manual..................................................................................... 172

ISO Sensitivity ........................................................................... 175 Picture Control .......................................................................... 176

Modifying Picture Controls............................................................ 176 Custom Picture Control ........................................................... 180

Edit/Save............................................................................................... 180 Load from/Save to Card.................................................................. 181

High ISO Noise Reduction....................................................... 182

The Setup Menu 183

Reset Setup Options ................................................................ 185 Format Memory Card............................................................... 185 Slot Empty Release Lock ......................................................... 185

ix

Display.........................................................................................185 Display Brightness.............................................................................185 Grid Display..........................................................................................186 Shooting ...............................................................................................186 Playback ................................................................................................186

Silent Photography...................................................................186 Sound Settings ..........................................................................187 Auto Power Off ..........................................................................187 Touch-Screen Controls.............................................................187 Shutter Button AE Lock............................................................187 Flicker Reduction.......................................................................188 Reset File Numbering...............................................................188 Time Zone and Date .................................................................189 Language ....................................................................................189 Auto Image Rotation ................................................................190 Pixel Mapping ............................................................................191 Firmware Version ......................................................................191

Technical Notes 192

Optional Accessories ................................................................192 Approved Memory Cards................................................................194 Attaching a Power Connector and AC Adapter......................195

Storage and Cleaning...............................................................197 Storage ..................................................................................................197 Cleaning ................................................................................................197

Caring for the Camera and Battery: Cautions......................198 Available Settings .....................................................................202 Defaults .......................................................................................205 Memory Card Capacity.............................................................206

x

Troubleshooting....................................................................... 209 Battery/Display................................................................................... 209 Shooting (All Modes) ....................................................................... 209 Shooting (P, S, A, and M Modes) .................................................... 211 Movies ................................................................................................... 211 Tap Shooting Options ..................................................................... 211 Playback................................................................................................ 212 Wi-Fi (Wireless Networks)............................................................... 212 Miscellaneous..................................................................................... 212

Error Messages.......................................................................... 213 Specifications ............................................................................ 216

Nikon 1 J4 Digital Camera .............................................................. 216 Battery Life........................................................................................... 233

Index ........................................................................................... 234

xi

To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equip- ment. Keep these safety instructions where all those who use the product will read them.

The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol:

WARNINGS

For Your Safety

A This icon marks warnings. To prevent possible injury, read all warn- ings before using this Nikon product.

AKeep the sun out of the frame. Keep the sun well out of the frame when shooting backlit subjects. Sunlight focused into the camera when the sun is in or close to the frame could cause a fire.

ATurn off immediately in the event of mal- function. Should you notice smoke or an unusual smell coming from the equipment or AC adapter (available separately), unplug the AC adapter and remove the battery immediately, taking care to avoid burns. Continued operation could result in injury. After removing the battery, take the equip- ment to a Nikon-authorized service center for inspection.

ADo not use in the presence of flammable gas. Do not use electronic equipment in the presence of flammable gas, as this could result in explosion or fire.

AKeep dry. Do not immerse in or expose to water or handle with wet hands. Failure to keep the product dry could result in damage to the product, fire, or electric shock, while handling the product with wet hands could result in electric shock.

ADo not disassemble. Touching the prod- ucts internal parts could result in injury. In the event of malfunction, the product should be repaired only by a qualified technician. Should the product break open as the result of a fall or other accident, remove the bat- tery and/or AC adapter and then take the product to a Nikon-authorized service center for inspection.

AKeep out of reach of children. Failure to observe this precaution could result in injury. In addition, note that small parts constitute a choking hazard. Should a child swallow any part of this equipment, consult a physician immediately.

ADo not place the strap around the neck of an infant or child. Placing the camera strap around the neck of an infant or child could result in strangulation.

xii

AFollow the instructions of airline and hos- pital personnel. This camera transmits radio frequencies that could interfere with medical equipment or aircraft navigation. Disable the wireless net- work feature before boarding an air- craft, and turn the camera off during take off and landing. In medical facili- ties, follow staff instructions regard- ing the use of wireless devices.

ADo not remain in contact with the camera, battery, or charger for extended periods while the devices are on or in use. Parts of the device become hot. Leaving the device in direct contact with the skin for extended periods may result in low-temperature burns.

ADo not leave the product where it will be exposed to extremely high temperatures, such as in an enclosed automobile or in direct sunlight. Failure to observe this precaution could cause damage or fire.

ADo not aim the flash at the operator of a motor vehicle. Failure to observe this precaution could result in accidents.

AObserve caution when using a flash. Using the camera with the flash in

close contact with the skin or other objects could cause burns.

Using a flash close to the subjects eyes could cause temporary visual impairment. The flash should be no less than one meter (3 ft 4 in.) from the subject. Particular care should be observed when photographing infants.

AAvoid contact with liquid crystal. Should the display break, care should be taken to avoid injury due to broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes or mouth.

ADo not carry tripods with a lens or camera attached. You could trip or accidentally strike others, resulting in injury.

AObserve proper precautions when handling b a t t e r i e s. Batteries may leak or explode if improperly handled. Observe the following precautions when handling batteries for use in this product: Use only batteries approved for use

in this equipment. Do not short or disassemble the

battery. Be sure the product is off before

replacing the battery. If you are using an AC adapter, be sure it is unplugged.

Do not attempt to insert the battery upside down or backwards.

Do not expose the battery to flame or to excessive heat.

Do not immerse in or expose to water.

Replace the terminal cover when transporting the battery. Do not transport or store the battery with metal objects such as necklaces or hairpins.

Batteries are prone to leakage when fully discharged. To avoid damage to the product, be sure to remove t h e b a t t e r y w h e n n o c h a r g e remains.

xiii

When the battery is not in use, attach the terminal cover and store in a cool, dry place.

The battery may be hot immedi- ately after use or when the product has been used on battery power for an extended period. Before remov- ing the battery turn the camera off and allow the battery to cool.

Discontinue use immediately should you notice any changes in the battery, such as discoloration or deformation.

AObserve proper precautions when handling the charger: Keep dry. Failure to observe this pre-

caution could result in injury or product malfunction due to fire or electric shock.

Do not short the charger terminals. Failure to observe this precaution could result in overheating and damage to the charger.

Dust on or near the metal parts of the plug should be removed with a dry cloth. Continued use could result in fire.

Do not go near the charger during thunderstorms. Failure to observe this precaution could result in elec- tric shock.

Do not handle the plug or charger with wet hands. Failure to observe this precaution could result in injury or product malfunction due to fire or electric shock.

Do not use with travel converters or adapters designed to convert from one voltage to another or with DC- to-AC inverters. Failure to observe this precaution could damage the product or cause overheating or fire.

AUse appropriate cables. When connect- ing cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose to maintain compliance with product regulations.

ACD-ROMs: CD-ROMs containing soft- ware or manuals should not be played back on audio CD equipment. Playing CD-ROMs on an audio CD player could cause hearing loss or damage the equipment.

xiv

No part of the manuals included with this product may be repro- duced, transmitted, transcribed, stored in a retrieval system, or trans- lated into any language in any form, by any means, without Nikons prior written permission.

Nikon reserves the right to change the specifications of the hardware and software described in these manuals at any time and without prior notice.

Nikon will not be held liable for any damages resulting from the use of this product.

While every effort has been made to ensure that the information in these manuals is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representa- tive in your area (address provided separately).

Notice for Customers in Canada CAN ICES-3 B / NMB-3 B

Notice for Customers in Europe

This symbol indicates that electrical and electronic equipment is to be col- lected separately.

The following apply only to users in European countries: This product is designated for sepa-

rate collection at an appropriate col- lection point. Do not dispose of as household waste.

Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environ- ment that might result from incor- rect disposal.

For more information, contact the retailer or the local authorities in charge of waste management.

This symbol on the battery indicates that the battery is to be collected separately.

The following apply only to users in European countries: All batteries, whether marked with

this symbol or not, are designated for separate collection at an appro- priate collection point. Do not dis- pose of as household waste.

For more information, contact the retailer or the local authorities in charge of waste management.

Notices

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

xv

Notice for Customers in the U.S.A.

Federal Communications Commission (FCC) Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable pro- tection against harmful interference in a residential installation. This equip- ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu- lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving

antenna. Increase the separation between the

equipment and receiver. Connect the equipment into an out-

let on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

CAUTIONS Modifications The FCC requires the user be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corpo- ration may void the users authority to operate the equipment.

Interface Cables Use the interface cables sold or pro- vided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules.

Notice for Customers in the State of California WARNING: Handling the cord on this product may expose you to lead, a chemical known to the State of Cali- fornia to cause birth defects or other reproductive harm. Wash hands after handling.

Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel.: 631-547-4200

The Battery Charger

IMPORTANT SAFETY INSTRUCTIONSSAVE THESE INSTRUCTIONS DANGERTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet if needed. This power unit is intended to be correctly oriented in a vertical or floor mount position.

xvi

Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that has been digitally cop- ied or reproduced by means of a scanner, digital camera, or other device may be punishable by law. Items prohibited by law from being copied

or reproduced Do not copy or reproduce paper money, coins, securities, govern- ment bonds, or local government bonds, even if such copies or repro- ductions are stamped Sample.

The copying or reproduction of paper money, coins, or securities which are circulated in a foreign country is prohibited.

Unless the prior permission of the government has been obtained, the copying or reproduction of unused postage stamps or post cards issued by the government is prohibited.

The copying or reproduction of stamps issued by the government and of certified documents stipu- lated by law is prohibited.

Cautions on certain copies and reproduc- tions The government has issued cautions on copies or reproductions of securi- ties issued by private companies (shares, bills, checks, gift certificates, etc.), commuter passes, or coupon tickets, except when a minimum of necessary copies are to be provided for business use by a company. Also, do not copy or reproduce passports issued by the government, licenses issued by public agencies and pri- vate groups, ID cards, and tickets, such as passes and meal coupons.

Comply with copyright notices The copying or reproduction of copyrighted creative works such as books, music, paintings, woodcuts, prints, maps, drawings, movies, and p h o t o g r a p h s i s g o v e r n e d b y national and international copyright laws. Do not use this product for the purpose of making illegal copies or to infringe copyright laws.

Disposing of Data Storage Devices Please note that deleting images or formatting memory cards or other data storage devices does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using com- mercially available software, potentially resulting in the malicious use of per- sonal image data. Ensuring the privacy of such data is the users responsibility.

Before discarding a data storage device or transferring ownership to another person, erase all data using commercial deletion software, or format the device and then completely refill it with images containing no private infor- mation (for example, pictures of empty sky). Wi-Fi settings can be reset to default values by selecting Wi-Fi > Wi-Fi connection type > Reset Wi-Fi set- tings in the setup menu. Care should be taken to avoid injury when physically destroying data storage devices.

xvii

AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (I) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (AVC VIDEO) AND/OR (II) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE http://www.mpegla.com

Temperature Warnings The camera may become warm to the touch during use; this is normal and does not indicate a malfunction. At high ambient temperatures, after extended periods of continuous use, or after several photographs have been taken in quick succession, a temperature warning may be displayed, follow- ing which the camera will turn off automatically to minimize damage to its internal circuits. Wait for the camera to cool before resuming use.

Use Only Nikon Brand Electronic Accessories Nikon cameras are designed to the highest standards and include complex electronic circuitry. Only Nikon brand electronic accessories (including charg- ers, batteries, AC adapters, and lens accessories) certified by Nikon specifically for use with this Nikon digital camera are engineered and proven to operate within the operational and safety requirements of this electronic circuitry.

The use of non-Nikon electronic accessories could damage the camera and may void your Nikon warranty. The use of third- party rechargeable Li-ion batteries not bearing the Nikon holo- graphic seal shown at right could interfere with normal operation of the cam- era or result in the batteries overheating, igniting, rupturing, or leaking.

For more information about Nikon brand accessories, contact a local autho- rized Nikon dealer.

xviii

DUse Only Nikon Brand Accessories Only Nikon brand accessories certified by Nikon specifically for use with your Nikon digital camera are engineered and proven to operate within its operational and safety requirements. THE USE OF NON-NIKON

ACCESSORIES COULD DAMAGE YOUR CAMERA AND MAY VOID YOUR NIKON WAR- RANTY.

D Servicing the Camera and Accessories The camera is a precision device and requires regular servicing. Nikon recommends that the camera be inspected by the original retailer or a Nikon-authorized service representative once every one to two years, and that it be serviced once every three to five years (note that fees apply to these services). Frequent inspection and servicing are particu- larly recommended if the camera is used professionally. Any accesso- ries regularly used with the camera, such as lenses, should be included when the camera is inspected or serviced.

ABefore Taking Important Pictures Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for dam- ages or lost profits that may result from product malfunction.

A Life-Long Learning As part of Nikons Life-Long Learning commitment to ongoing prod- uct support and education, continually-updated information is avail- able on-line at the following sites: For users in the U. S. A.: http://www.nikonusa.com/ For users in Europe and Africa: http://www.europe-nikon.com/support/ For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/

Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently-asked questions (FAQs), and general advice on digital imaging and photography. Additional information may be available from the Nikon representative in your area. For contact infor- mation, visit http://imaging.nikon.com/

xix

This product, which contains encryption software developed in the United States, is controlled by the United States Export Administration Regulations and may not be exported or re-exported to any country to which the United States embargoes goods. The following countries are currently subject to embargo: Cuba, Iran, North Korea, Sudan, and Syria.

Notices for Customers in the U. S. A. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interfer- ence that may cause undesired operation.

FCC WARNING The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the users authority to operate the equipment.

FCC Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Co-location This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel.: 631-547-4200

Wireless

xx

Notices for Customers in Canada CAN ICES-3 B / NMB-3 B This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.

FCC/IC RF Exposure Statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wire- less devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have sug- gested that some biological effects might occur, but such findings have not been confirmed by additional research. The 1 J4, which is equipped with a LBWA1ZZYM6 (FCC ID:VPYLBYM / IC ID:772C-LBYM) wireless LAN module, has been tested and found to comply with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. Please refer to the SAR test report that was uploaded to FCC website.

xxi

Notices for Customers in Europe Hereby, Nikon Corporation, declares that the 1 J4 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be con- sulted at http://imaging.nikon.com/support/pdf/DoC_1J4.pdf

Notice for Customers in Singapore

This device complies with radio-frequency regulations. The content of certifi- cation labels not affixed to the device is given below.

Security Although one of the benefits of this product is that it allows others to freely connect for the wireless exchange of data anywhere within its range, the fol- lowing may occur if security is not enabled: Data theft: Malicious third-parties may intercept wireless transmissions to

steal user IDs, passwords, and other personal information. Unauthorized access: Unauthorized users may gain access to the network

and alter data or perform other malicious actions. Note that due the design of wireless networks, specialized attacks may allow unauthorized access even when security is enabled.

Trade Name: Model: 1 J4

Complies with IDA Standards DA104328

xxii

1

s

s

Introduction

Before using your camera for the first time, confirm that the package contains the items listed in the Users Manual.

Before You Begin

2

s

Take a few moments to familiarize yourself with camera controls and displays. You may find it helpful to bookmark this section and refer to it as you read through the rest of the manual.

The Camera Body

Parts of the Camera

31 2 54

7

9

6 5

14

15

16

13 1112

17

8

1810

1 Movie-record button ................. 54, 55 2 Shutter-release

button ....................... 33, 59, 65, 70, 75 3 Power switch........................................23

Power lamp ..........................................23 4 Mode dial ................................................ 6 5 Microphone....................................... 168 6 Focal plane mark (E) ..................... 158 7 AF-assist illuminator ....................... 161

Self-timer lamp....................................82 Red-eye reduction lamp ............ 85, 87

8 Flash pop-up button..........................86

9 Eyelet for camera strap......................16 10 Connector cover 11 Lens release button............................22 12 Dust shield.................................197, 198 13 Lens mount .................................21, 158 14 Mounting mark ...................................21 15 Body cap .............................................193 16 Built-in flash .........................................84 17 HDMI connector................................121 18 USB connector..........................118, 123

3

s

The Camera Body (Continued)

* Camera does not support TA-N100 tripod mounting spacer.

2 1

1011

3 4 5

7 6

12 13

8

9

1 Monitor ................................. 4, 103, 185 2 K (playback) button ............31, 72, 78 3 G (menu) button .......................... 8 4 Multi selector ......................................... 7 J (OK) button....................................... 7 & (feature) ...........................................10 E (exposure compensation)............83 M (flash mode).....................................84 C (continuous shooting/ self-timer)..................................... 79, 81

5 Memory card access lamp ......... 20, 30

6 O (delete) button....................... 32, 109 7 Power connector cover

for optional power connector......195 8 Battery-chamber/memory card slot

cover latch........................... 18, 20, 195 9 Battery-chamber/

memory card slot cover ... 18, 20, 195 10 Tripod socket *

11 Speaker 12 Memory card slot................................ 18 13 Battery latch......................... 18, 20, 195

AHolding the Camera When framing photographs, hold the camera as shown below.

Hold the camera in your right hand.

Keep your elbows propped lightly

against your torso.

Cradle the lens with your left hand.

4

s

The Monitor

* Available only when Detailed is selected for Display > Shooting in the setup menu (0 186).

Note: Display shown with all indicators lit for illustrative purposes.

421 3 5 6 7 8 9 1011

29 28

33

17

12 13 14

18

2127 222325 2426 20

15 16

19

30

34

32 31

35 36

1 Shooting mode ..................................... 6 2 Live image control ..............................36

Creative mode ....................................38 Best moment capture selection ................................ 63, 67, 69

Advanced movie selection ........ 54, 57 Exposure mode ................................ 142

3 Flexible program indicator ...............41 4 Flash mode .................................... 85, 87 5 Self-timer ..............................................81

Continuous mode *.............................79 6 Active D-Lighting * .......................... 152 7 Picture Control * ............................... 176 8 White balance * ................................ 170 9 Frame size/frame rate ..................... 167

10 Image size * ....................................... 143 11 Image quality * ................................. 143 12 Focus mode *..................................... 155 13 AF-area mode *................................. 159 14 Face-priority *..............................34, 161 15 Focus area....................................29, 159 16 AF-area brackets * ............................ 155 17 Flash compensation ........................ 163 18 Exposure compensation ...................83 19 Flash-ready indicator .........................88

20 k (appears when memory remains for over 1000 exposures) .................27

21 Number of exposures remaining....27 Number of shots remaining before memory buffer fills ..............80

White balance recording indicator .........................173

Card warning indicator...........185, 213 22 Time available......................................55 23 ISO sensitivity ....................................175 24 ISO sensitivity indicator...................175

Auto ISO sensitivity indicator ........175 25 Aperture......................................... 43, 44 26 Shutter speed ............................... 42, 44 27 Metering .............................................149 28 Battery indicator *...............................27 29 Sound settings * ................................187 30 Autoexposure (AE) lock

indicator ............................................187 31 Auto distortion control....................150 32 Tap shooting options.........................90 33 Auto image capture .........................168 34 Microphone sensitivity * .................168 35 Time elapsed........................................55 36 Recording indicator............................55

5

s

ARecording Area The area recorded when electronic vibration reduction (0 154) is in effect during movie recording is shown by a frame in the shoot- ing display.

Area recorded

6

s

The Mode Dial

The camera offers a choice of the follow- ing shooting modes:

Mode dial

z Motion Snapshot mode (0 74): Each time the shutter is released, the camera records a still image and about 1.6 s of movie footage. When the resulting Motion Snapshot is viewed on the camera, the movie will play back in slow motion over approximately 4 s, followed by the still image.

u Best moment capture mode (0 63): Choose Active Selection to select the best picture from 20 shots in temporary storage, Slow view to choose the best timing for the shot while the scene plays back in slow motion, or Smart Photo Selector to let the camera pick the best shot based on composition and movement.

C Auto mode (0 28): Let the camera pick the set- tings for photographs and movies.

w Creative mode (0 38): For photographs in which you want to use special effects, match set- tings to the scene, or control shutter speed and aperture.

v Advanced movie mode (0 54): Choose an exposure mode and adjust shutter-speed or aperture or record movies in slow or fast motion or with other special effects.

7

s

The Multi Selector

The multi selector and J button are used to adjust settings and navigate the cam- era menus.

Multi selector

Settings: & Access the & (feature) menu, a context-sensi- tive menu listing options for shooting or play- back (0 10).

Menu navigation: 1 Move cursor up.

Settings: C View continuous shooting/self-timer menu (0 79, 81).

Menu navigation: 4 Return to previous menu.

Select highlighted item.

Settings: E View exposure com- pensation menu (0 83).

Menu navigation: 2 Select highlighted item or display sub-menu.

Settings: M View flash mode menu (0 84, 86).

Menu navigation: 3 Move cursor down.

A The Multi Selector Items can be highlighted by rotating the multi selector as shown at right.

8

s

The G Button

Most shooting, playback, and setup options can be accessed from the camera menus. Press the G button to display the menu selection dialog shown below, then use the multi selector to highlight the icon for the desired menu and press J. To exit the menus, tap 1. G button

Shooting menu (0 139): Movie menu (0 164): Adjust settings for still photography. Adjust movie-recording

options.

Image processing menu (0 169): Wi-Fi menu (0 93): Adjust white balance, ISO sensitivity, Picture Controls, and other image processing settings for photographs and movies.

Connect to wireless networks.

Setup menu (0 183): Adjust basic camera settings.

Playback menu (0 128): Adjust playback settings.

9

s

Using the Menus

1 Select an item.

2 Select an option.

Use the multi selector (0 7) to navigate the playback, shooting, movie, image processing, setup, and Wi-Fi menus.

Multi selector

Press 1 or 3 to highlight menu items and press 2 to view options for the highlighted item.

Press 1 or 3 to highlight the desired option and press J to select.

AUsing the Menus The items listed may vary with camera settings. Items displayed in gray are not currently available (0 202). To change menus, press 4 in Step 1 and select a menu as described on page 8. To exit the menus and return to shooting mode, press the shutter-release button halfway (0 33).

10

s

The & (Feature) Menu

1 Select an item.

2 Select an option.

To display the feature menu and adjust camera settings or access playback options, press & (feature) on the multi selector.

& menu (shooting mode) & menu (playback)

Use the multi selector to highlight an item and press J to display options (to exit the & menu, press the shutter- release button halfway as described on page 33 or highlight 1 and press J).

Highlight the desired option or value and press J to select.

A The & Menu The & menu is context-sensitive: its contents vary with camera settings or the type of image displayed; options that are currently unavailable are shown in gray. The & menu is not available in auto mode.

11

s

The touch-sensitive monitor supports the following operations:

Tap

Flick

Slide

Stretch/Pinch

Using the Touch Screen

Tap the monitor.

Flick a finger a short distance across the monitor.

Slide a finger over the monitor.

Place two fingers on the monitor and move them apart or pinch them together.

12

s

Taking Pictures The touch screen can be used for the following shooting opera- tions.

A The Touch Screen The touch screen responds to static electricity and may not respond when covered with third-party protective films or when touched with fingernails or gloved hands. Do not use excessive force or touch the screen with sharp objects.

AUsing the Touch Screen The camera may not recognize a tap if you leave your finger on the screen too long. It may not recognize other gestures if your touch is too soft, your fingers are moved too quickly or too short a distance or do not remain in contact with the screen, or if the movement of the two fingers in a pinch or stretch is not correctly coordinated.

Take a picture (tap shooting)

In auto and creative modes, you can focus and take a picture by tapping your subject in the dis- play.

Focus (tap shooting)

In advanced movie mode, you can focus by tapping your subject in the display.

13

s

Viewing Pictures The touch screen can be used for the following playback opera- tions.

Adjust settings

Tap highlighted icons to view set- tings and tap icons or sliders to change (the items available vary with camera settings). Tap 0 to save changes and exit, or tap 2 to return to the previous display.

A Tap Shooting Options Tap shooting options can be adjusted by tapping the icon shown at right (0 90).

View other images

Flick left or right to view other images.

14

s

Using the Menus The touch screen can be used for the following menu opera- tions.

Zoom in

Use stretch and pinch gestures to zoom in and out and slide to scroll. You can also double-tap a picture in full-frame playback to zoom in and double-tap again to exit zoom (0 108).

View thumbnails

To zoom out to a thumbnail view (0 106), use a pinch gesture in full-frame playback. Use pinch and stretch to choose the number of images displayed from 4, 9, or 16 frames.

View other months

Flick left or right to view other months in the calendar display (0 107).

Use on-screen guides

Various operations can be per- formed by tapping on-screen guides.

Scroll Slide up or down to scroll.

15

s

The & Menu The touch screen can be used to adjust settings in the & menu.

Choose a menu

Tap a menu icon to choose a menu.

Adjust settings

Tap menu items to display options and tap icons or sliders to change. Tap 2 to return to the previous display.

Adjust settings

Tap menu items to display options and tap icons or sliders to change. Tap 0 to save changes and exit, or tap 2 to return to the previous display.

16

s

1 Attach the camera strap. Attach the strap securely to the two camera eyelets.

2 Charge the battery. Insert the battery into the charger q and plug the charger in w. An exhausted battery fully charges in about three hours. Unplug the charger and remove the battery when charging is complete.

First Steps

A The Plug Adapter Depending on the country or region of purchase, a plug adapter may be sup- plied with the charger. The shape of the adapter varies with the country or region of purchase. If a plug adapter is supplied, raise the wall plug and connect the plug adapter as shown at right, making sure the plug is fully inserted. Attempting to forcibly remove the plug adapter could damage the product.

Battery charging

Charging complete

17

s

D The Battery and Charger Read and follow the warnings and cautions on pages xixiii and 198 201 of this manual. Do not use the battery at ambient temperatures below 0C (32F) or above 40C (104F); failure to observe this pre- caution could damage the battery or impair its performance. Capacity may be reduced and charging times may increase at bat- tery temperatures from 0C (32F) to 10C (50F) and from 45C (113F) to 60C (140F); the battery will not charge if its tempera- ture is below 0C (32F) or above 60C (140F).

Charge the battery at ambient temperatures between 5C (41F) and 35C (95F). If the CHARGE lamp flashes quickly during charging, cease use immediately and take battery and charger to your retailer or a Nikon-authorized service representative.

Do not move the charger or touch the battery during charging. Fail- ure to observe this precaution could in very rare instances result in the charger showing that charging is complete when the battery is only partially charged. Remove and reinsert the battery to begin charging again.

Use the charger with compatible batteries only. Unplug when not in use.

18

s

3 Insert the battery and a memory card. The camera stores pictures on microSD, microSDHC, and microSDXC memory cards (available separately; 0 194). Before inserting the battery or memory cards, check that they are in the correct orientation. Using the battery to keep the orange battery latch pressed to one side, slide the battery in until it latches, and then slide in the memory card until it clicks into place. Do not attempt to insert the card at an angle; failure to observe this precaution could damage the product.

16G B

Front

19

s

D Inserting and Removing Batteries and Memory Cards Always turn the camera off before inserting or removing batteries or memory cards. Note that the battery and memory cards may be hot after use; observe due caution when removing the battery and memory cards.

A Formatting Memory Cards If this is the first time the memory card will be used in the camera or if the card has been formatted in another device, select Format memory card in the setup menu and follow the on-screen instruc- tions to format the card (0 185). Note that this permanently deletes any data the card may contain. Be sure to copy any photo- graphs and other data you wish to keep to a computer before proceeding.

20

s

ARemoving Batteries and Memory Cards After turning the camera off, confirm that the memory card access lamp (0 3) is off and open the battery-chamber/memory card slot cover. To remove the battery, first release it by pressing the orange battery latch in the direction shown by the arrow and then remove the battery by hand.

To remove a memory card, first press the card in to eject it (q); the card can then be removed by hand (w). Care should be taken to prevent the card popping from the camera when ejected.

DMemory Cards Do not remove memory cards from the camera, turn the camera

off, or remove or disconnect the power source during formatting or while data are being recorded, deleted, or copied to a com- puter. Failure to observe these precautions could result in loss of data or in damage to the camera or card.

Do not touch the card terminals with your fingers or metal objects. Do not bend, drop, or subject to strong physical shocks. Do not apply force to the card casing. Failure to observe this pre-

caution could damage the card. Do not expose to water, heat, high levels of humidity, or direct

sunlight. Do not format memory cards in a computer.

21

s

4 Attach a lens. Be careful to prevent dust from entering the camera when the lens or body cap is removed. The lens generally used in this manual for illustrative purposes is a 1 NIKKOR VR 1030mm f/3.55.6 PD-ZOOM.

Remove the rear lens cap

Remove the camera body cap

Mounting mark (camera)

Mounting mark (lens)

Keeping the mounting marks aligned, position the lens on the camera

22

s If the lens supports vibration reduction (VR), vibration reduc- tion can be controlled from the camera (0 153).

ADetaching the Lens Be sure the lens is retracted before removal. To remove the lens, turn the camera off, then press and hold the lens release button (q) while turning the lens clockwise (w). After removing the lens, replace the camera body cap, the rear lens cap, and, if applicable, the front lens cap.

A Lenses with Retractable Lens Barrel Buttons Lenses with retractable lens barrel but- tons can not be used when retracted. To unlock and extend the lens, readying the camera for use, keep the retractable lens barrel button pressed (q) while rotating the zoom ring as shown (w). The lens can be retracted and the zoom ring locked by pressing the button and rotating the ring in the opposite direction. Be careful not to press the retractable lens barrel button while attaching or removing the lens.

Rotate the lens as shown until it clicks into place.

Zoom ring

Retractable lens barrel button

23

s

5 Turn the camera on. Press the power switch to turn the camera on. The power lamp will briefly light green and the monitor will turn on. If the lens is equipped with a front lens cap, remove the cap before shooting. If a 1 NIKKOR VR 1030mm f/3.55.6 PD-ZOOM lens is attached, the lens will automatically extend when the camera is turned on and retract when the camera is turned off.

A Turning the Camera Off To turn the camera off, press the power switch again. The monitor will turn off.

A Auto Power Off If no operations are performed for about a minute, the display will turn off and the power lamp start to flash (if desired, the delay before the display turns off automatically can be changed using the Auto power off option in the setup menu; 0 187). The camera can be reactivated by operating the shutter-release button. If no opera- tions are performed for about three minutes after the display has turned off, the camera will turn off automatically.

A Attaching and Removing Lenses Turn the camera off before attaching or removing lenses. Note that when the camera is turned off, the sensor protection barrier in the lens will close, protecting the camera image sensor.

24

s

6 Choose a language.

A Lenses with Retractable Lens Barrel Buttons The camera will turn on automatically when the retractable lens barrel lock is released; in addition, if the view through the lens is dis- played or the monitor is off, the camera will turn off when the lens barrel is locked (in the case of 1 NIKKOR VR 1030mm f/3.55.6 and 1 NIKKOR VR 30110mm f/3.85.6 lenses, firmware version 1.10 or later is required if locking the lens barrel is to turn the camera off when the monitor is off; for information on updating lens firmware, visit the Nikon website for your area).

A language-selection dialog will be displayed the first time the camera is turned on. Use the multi selector and J button (0 7) to choose a language.

25

s

7 Set the clock. Use the multi selector and J button (0 7) to set the time and date. Note that the camera uses a 24-hour clock.

Press 4 or 2 to highlight time zone and press J.

Press 1 or 3 to highlight date format and press J.

Press 1 or 3 to highlight daylight saving time option and press J.

Press 4 or 2 to highlight items and press 1 or 3 to change. Press J to exit to shooting display when

setup is complete.

Note: Language and clock can be changed at any time using Language (0 189) and Time zone and date (0 189) options in setup menu.

26

s

A The Camera Clock The camera clock is less accurate than most watches and household clocks. Check the clock regularly against more accurate time pieces and reset as necessary.

The camera clock is powered by an independent, rechargeable power source, which is charged as necessary when the main battery is installed or the camera is powered by an optional EP-5E power connector and EH-5b AC adapter (0 195). Three days of charging will power the clock for about a month. If a message warning that the clock is not set is displayed when the camera is turned on, the clock battery is exhausted and the clock has been reset. Set the clock to the correct time and date.

27

s

8 Check the battery level and memory card capacity. Check the battery level and number of exposures remaining in the moni- tor.

Battery Level

Number of Exposures Remaining The monitor shows the number of pictures that can be stored on the memory card at current settings (values over 1000 are rounded down to the nearest hundred; e.g., values between 1200 and 1299 are shown as 1.2 k). If a warning is displayed stating that there is not enough memory for additional images, insert another memory card (0 18) or delete some photos (0 109).

Display Description

NO ICON

Battery fully charged or partially discharged; level shown by L or K icon in detailed display (0 186).

H

Low battery. Ready fully-charged battery or prepare to charge battery.

Cannot take pictures. Insert fully-charged battery.

Battery exhausted; shutter-release disabled. Insert charged battery.

Battery level

Exposures remaining

z

28

z

Taking and Viewing Photographs This chapter describes how to take, view, and delete photo- graphs in auto and creative mode.

Follow the steps below to take photographs in auto mode, a point-and-shoot mode in which the camera automatically detects the subject type and adjusts settings according to the subject and situation.

1 Turn the camera on.

2 Select C mode.

Point-and-Shoot Photography (Auto Mode)

Press the power switch to turn the camera on.

Rotate the mode dial to C (auto).

29

z

3 Ready the camera.

4 Frame the photograph.

5 Focus. Press the shutter-release button halfway to focus. If the subject is poorly lit, the flash may pop up (0 84) and the AF-assist illumina- tor (0 161) may light to assist the focus operation.

If the camera is able to focus, the selected focus area will be highlighted in green and a beep will sound (a beep may not sound if the subject is moving).

If the camera is unable to focus, the focus area will be displayed in red.

Hold the camera securely with both hands, being careful not to obstruct the lens, AF-assist illuminator, or microphone. Rotate the camera as shown at lower right when taking pic- tures in tall (portrait) orientation.

Position your subject in the center of the frame.

Focus area

30

z

6 Shoot. Smoothly press the shutter- release button the rest of the way down to release the shutter and record the photograph. The memory card access lamp will light and the photograph will be displayed in the monitor for a few seconds (the photo will automatically clear from the display when the shutter-release button is pressed halfway). Do not eject the memory card or remove the battery until the l a m p h a s g o n e o u t a n d recording is complete.

Memory card access lamp

A The Framing Grid A framing grid can be displayed by selecting On for Display > Grid display in the setup menu (0 186).

31

z

Viewing Photographs

To end playback and return to shooting mode, press the shutter- release button halfway.

Press K to display your most recent pho- tograph full frame in the monitor (full- frame playback).

K button

Press 4 or 2 or rotate the multi selector to view additional pictures.

A The & (Feature) Menu (0 10) The following options can be accessed by pressing & when a photo is displayed:

1 Start slide show ................................ 111 2 Wi-Fi upload ........................................ 93 3 Protect................................................. 131 4 Rating.................................................. 131 5 Crop ..................................................... 134 6 Resize .................................................. 133 7 D-Lighting.......................................... 132

1 2

6

3

4

57

32

z

Deleting Pictures To delete the current picture, press O. Note that once deleted, pic- tures can not be recovered.

1 Display the photograph. Display the photograph you wish to delete as described on the preceding page.

2 Press O.

3 Delete the photograph.

A confirmation dialog will be dis- played.

O button

Press O again to delete the picture and return to playback, or press K to exit without deleting the picture.

33

z

A The Shutter-Release Button The camera has a two-stage shutter-release button. The camera focuses when the shutter-release button is pressed halfway. To take the photograph, press the shutter-release button the rest of the way down.

Focus: Press halfway Shoot: Press the rest of the way down

A Taking Several Photographs in Succession If Off is selected for Image review in the playback menu (0 131), you can take additional photographs without refocusing by keeping the shutter-release button pressed halfway between shots.

A Automatic Scene Selection In auto mode, the camera automatically ana- lyzes the subject and selects the appropriate scene. The selected scene is shown in the monitor.

Scene icon

c Portrait: Human portrait subjects. d Landscape: Landscapes and cityscapes. f Night portrait: Portrait subjects framed against dark backgrounds. e Close up: Subjects close to the camera. g Night landscape: Poorly-lit landscapes and cityscapes. Z Auto: Subjects that do not fall into the categories listed above.

34

z

AUsing a Zoom Lens Use the zoom ring to zoom in on the subject so that it fills a larger area of the frame, or zoom out to increase the area visible in the final photo- graph. During movie recording with the 1 NIKKOR VR 1030mm f/3.5 5.6 PD-ZOOM, the zoom rate is unaffected by the speed with which the ring is rotated.

Zoom in Zoom out

Zoom ring

If you are using a 1 NIKKOR VR 10100mm f/4.55.6 PD-ZOOM lens (available sepa- rately), slide the power drive zoom switch to T to zoom in and to W to zoom out. The speed with which the camera zooms in and out var- ies with how far you slide the switch. The zoom position is shown by the zoom guide in the display.

Zoom guide

A Face Priority The camera detects and focuses on portrait subjects (face priority). A double yellow bor- der will be displayed if a portrait subject is detected facing the camera (if multiple faces, up to a maximum of five, are detected, the camera will select the closest subject). Press the shutter-release button halfway to focus on the subject in the double yellow border. The border will clear from the display if the camera can no longer detect the subject (because, for example, the subject has looked away).

A Available Settings For information on the options available in auto mode, see page 202.

35

z

ADeleting Multiple Pictures The Delete option in the playback menu (0 109) can be used to delete all or selected pictures.

A See Also See page 186 for information on silencing the beep that sounds when the camera focuses or the shutter is released. For information on tog- gling photo info on or off, see page 186. See page 106 for information on viewing multiple images. For information on zooming in on the cen- ter of the current image, see page 108. See page 111 for information on slide shows.

36

z

Live Image Control Live image controls let you preview how changes to each control will affect the final photograph. To choose a live image control for auto mode, press J to display the live image control menu, then use the multi selector to highlight a control and press J to view the effect. Rotate the multi selector to choose a setting and press J to select.

Active D-Lighting: Preserve details in high- lights and shadows for natural contrast.

Increase effect

Reduce effectActive D-Lighting: High Active D-Lighting: Low

Background softening: Soften background details to make your subject stand out, or bring both background and foreground into focus.

Sharpen background

Soften background

Background sharp Background softened

37

z

Motion control: Suggest motion by blurring moving objects, or freeze motion to capture moving objects clearly.

Freeze motion

Blur motion Freeze motion Blur motion

Brightness control: Make pictures brighter or darker.

Brighter

DarkerBrighter Darker

D Live Image Control Continuous shooting is not available (0 79) and the built-in flash can not be used when live image control is in effect. Pressing the movie- record button cancels live image control.

38

z

Choose creative mode to match settings to the subject or situa- tion, take photos using special effects, or control shutter speed and aperture.

1 Select w mode.

2 Choose an option.

Choosing a Creative Mode

Rotate the mode dial to w (creative).

Press & (feature) on the multi selector to display the & menu, then highlight Creative and press J. Highlight an option suited to your subject and cre- ative intent (0 39) and press J.

39

z

Choosing a Mode That Matches the Subject or Situation Choose a creative mode according to the subject or situation:

Option Description

Programmed auto (P)

The camera sets shutter speed and aperture for opti- mal exposure (0 41). Recommended for snapshots and in other situations in which there is little time to adjust camera settings.

Shutter-priority auto (S)

You choose the shutter speed; the camera selects an aperture for best results (0 42). Use to freeze or blur motion.

Aperture-priority auto (A)

You choose the aperture; the camera selects a shut- ter speed for best results (0 43). Use to blur the background or bring both foreground and back- ground into focus.

Manual (M) You control both shutter speed and aperture (0 44). Choose a shutter speed of Bulb for long time-expo- sures (0 45).

Creative Palette (4) Rotate the palette to choose creative effects while previewing them in the display (0 47).

HDR (5) Photograph high-contrast scenes (0 48).

Easy panorama (p) Shoot panoramas for later viewing on the camera (0 49).

Soft (q)

Shoot photographs with a soft filter effect. Use the & (feature) menu (0 40) to select the amount of soft- ening and to choose how softening applies to por- traits (0 148).

Miniature effect (r)

The top and bottom of each photo is blurred so that the subject appears to have been a diorama photo- graphed at short range. Works best when shooting from a high vantage point.

Selective color (s) Take photos in which only a selected hue appears in color (0 52).

Cross process (6) Choose a base color to create photographs with dif- ferent hues (0 53).

Toy camera effect (7) Alter color saturation and reduce peripheral illumi- nation for a toy camera effect (0 149). The effect can be adjusted using the & menu (0 40).

40

z

A The & (Feature) Menu (0 10) Pressing & in creative mode displays the items listed below. The items available vary with the option selected for creative mode (0 39).

1 Shooting mode......................................6 2 Creative..................................................38 3 Shutter speed................................42, 44 4 Aperture .........................................43, 44 5 ISO sensitivity.................................... 175 6 AF-area mode ................................... 159

Focus mode ....................................... 155 Metering............................................. 149 Picture Control.................................. 176 White balance ................................... 170 Image size .......................................... 143 Select color ...........................................52 Filter strength ................................... 148 Portrait................................................ 148 Hue .........................................................53 Saturation .......................................... 149 Vignetting .......................................... 149

A Available Settings For information on the options available in creative mode, see page 204.

1 2

3 4 5

6

41

z

Taking Photos in P, S, A, and M Modes P, S, A, and M modes offer varying degrees of control over shutter speed and aperture. Choose a mode and adjust settings accord- ing to your creative intent.

P Programmed Auto In this mode, the camera automatically adjusts shutter speed and aperture for optimal exposure in most situations. This mode is recommended for snapshots and other situations in which you want to leave the camera in charge of shutter speed and aperture.

A Choosing a Combination of Shutter Speed and Aperture Although the shutter speed and aperture chosen by the camera will produce optimal results, you can also choose from other com- binations that will produce the same expo- sure (flexible program). Rotate the multi selector clockwise for large apertures (low f-numbers) that blur background details or fast shutter speeds that freeze motion. Rotate the multi selector counterclockwise for small apertures (high f-numbers) that increase depth of field or slow shutter speeds that blur motion. U is displayed while flexible program is in effect.

ARestoring Default Shutter Speed and Aperture Settings To restore default shutter speed and aperture settings, rotate the multi selector until U is no longer displayed or turn the camera off. The default shutter speed and aperture is automatically restored when the camera enters standby mode.

42

z

S Shutter-Priority Auto In shutter-priority auto, you choose the shutter speed while the camera automatically selects the aperture that will produce the optimal exposure. Use slow shutter speeds to suggest motion by blurring moving subjects, fast shutter speeds to freeze motion.

Choosing a Shutter Speed Rotate the multi selector to choose from shutter speeds between 30 s and 1/16,000 s. Rotate the selector clockwise for faster shutter speeds, counterclockwise for slower shutter speeds.

Fast shutter speed (1/1600 s) Slow shutter speed (1 s)

A Continuous Shooting The selected shutter speed may change when a frame rate of 10 fps or faster is selected in continuous shooting mode (0 79).

43

z

A Aperture-Priority Auto In aperture-priority auto, you choose the aperture while the camera automatically selects the shutter speed that will produce the optimal exposure. Large apertures (low f-numbers) reduce depth of field, blurring objects behind and in front of the main subject. Small apertures (high f-numbers) increase depth of field, bringing out details in the background and foreground. Short field depths are generally used in portraits to blur back- ground details, long field depths in landscape photographs to bring the foreground and background into focus.

Choosing an Aperture Rotate the multi selector counterclock- wise for larger apertures (lower f-num- bers), clockwise for smaller apertures (higher f-numbers). The minimum and maximum values depend on the lens cur- rently in use.

Large aperture (f/5.6) Small aperture (f/16)

44

z

M Manual In manual mode, you control both shutter speed and aperture.

Choosing Shutter Speed and Aperture Adjust shutter speed and aperture with reference to the exposure indicator (see below). Press 2 to highlight shutter speed or aperture and rotate the multi selector to choose a value, then repeat for the remaining item. Rotate the selec- tor clockwise for faster shutter speeds or smaller apertures (higher f-numbers), counterclockwise for slower shutter speeds and larger apertures (lower f- numbers). Shutter speeds can be set to values as fast as 1/16,000 s or as slow as 30 s, or to Bulb to hold the shutter open indefinitely for a long time-exposure (0 45). Aperture can be set to values between the minimum and maximum for the lens.

A Continuous Shooting The selected shutter speed may change when a frame rate of 10 fps or faster is selected in continuous shooting mode (0 79).

Shutter speed

Press 2 to highlight aperture.

Aperture

Press 2 to highlight shutter speed.

45

z

Long Time-Exposures (M Mode Only) Select a shutter speed of Bulb for long time-exposures of moving lights, the stars, night scenery, or fireworks. The shutter remains open while the shutter- release button is held down. To prevent blur, use a tripod.

1 Ready the camera. Mount the camera on a tripod or place it on a stable, level sur- face. To prevent loss of power before the exposure is com- plete, use a fully charged EN-EL22 battery or an optional EH-5b AC adapter and EP-5E power connector. Note that noise (bright spots, randomly-spaced bright pixels, or fog) may be present in long exposures; before shooting, choose On for Long exposure NR in the shooting menu (0 153).

A The Exposure Indicator When shutter speeds other than Bulb are selected, the exposure indicator shows whether the photograph would be under- or over-exposed at current settings.

Optimal exposure Underexposed by 1/3 EV Overexposed by over 2 EV

A ISO Sensitivity (P, S, A, and M Modes) When an auto option is selected for ISO sensitivity (0 175), the cam- era will automatically adjust sensitivity within the selected range if optimal exposure can not be achieved at the selected shutter speed or aperture.

46

z

2 Choose a shutter speed of Bulb. Press 2 to highlight shutter speed and rotate the multi selector counterclock- wise to select Bulb.

3 Open the shutter. After focusing, press the shutter-release button all the way down. Keep the shutter-release button pressed until the exposure is complete.

4 Close the shutter. Take your finger off the shutter-release button.

Shooting ends automatically after about two minutes. Note that some time may be required to record long exposures.

47

z

The Creative Palette To choose a creative effect, rotate the multi selector or use a fin- ger to rotate the creative palette in the monitor. The selected effect is visible in the monitor and changes gradually as the pal- ette is rotated.

Press the shutter-release button all the way down to take a pic- ture with the selected effect (tap shooting options are not avail- able when the creative palette is displayed; to view or hide the creative palette, tap 4). The built-in flash can not be used.

A Scene Detection The camera automatically adjusts settings to suit the subject and situa- tion. The effects available vary with the type of subject detected. To reset the palette, press J or tap Reset while the creative palette is dis- played.

48

z

HDR Details in highlights and shadows are preserved using HDR (high dynamic range). Each time the shutter-release button is fully pressed, the camera takes two shots in quick succession and combines them to preserve details in highlights and shadows in high-contrast scenes; the built-in flash does not fire. Some time may be required to process the pictures; the final photograph will be displayed when processing is complete.

+

First exposure (darker)

Second exposure (brighter)

Combined HDR image

D Framing HDR Photographs The edges of the image will be cropped out. The desired results may not be achieved if the camera or subject moves during shooting. Depending on the scene, shading may be uneven and shadows may appear around bright objects or halos around dark objects.

49

z

Easy Panorama Follow the steps below to shoot panoramas. During shooting, the camera focuses using auto-area AF (0 159); face detection (0 34) is not available. Exposure compensation (0 83) can be used, but the built-in flash will not fire.

1 Set focus and exposure. Frame the start of the pan- orama and press the shut- ter-release button halfway. Guides will appear in the display.

2 Start shooting. Press the shutter-release button the rest of the way down and then lift your fin- ger from the button. 1, 3, 4, and 2 icons will appear in the display to indicate the possible pan directions.

3 Pan the camera. Slowly pan the camera up, down, left, or right as shown below. Shooting will start when the camera detects the pan direction and a progress indicator will appear in the display. Shooting ends automatically when the end of the panorama is reached.

Progress indicator

50

z

An example of how to pan the camera is shown below. With- out changing your position, pan the camera in a steady curve either horizontally or vertically. Time the pan according to the option selected for Image size in the shooting menu: about 15 seconds are needed to complete the pan when A Normal panorama is selected, about 30 seconds when B Wide panorama is selected.

A Panoramas High-distortion wide-angle lenses may fail to produce the desired results. An error message will be displayed if the camera is panned too quickly or unsteadily. Note that because panoramas are composed of multiple images, the joins between images may be visible and the desired results may not be achieved with moving subjects or with neon lights or other subjects that exhibit rapid changes in color or bright- ness, subjects that are too close to the camera, poorly-lit subjects, and subjects such as the sky or sea that are a solid color or contain simple repeating patterns.

The completed panorama will be slightly smaller than the area visible in the display during shooting. No panorama will be recorded if shoot- ing ends before the halfway point; if shooting ends after the halfway point but before the panorama is complete, the unrecorded portion will be shown in gray.

51

z

Viewing Panoramas Panoramas can be viewed by pressing 3 when a panorama is displayed full frame (0 31). The start of the panorama will be displayed with the smallest dimension filling the display and the camera will then scroll through the picture in the original pan direction.

The following operations can be performed:

Navigation window

Guide

To Use Description

Pause Pause playback.

Play J Resume playback when the panorama is paused or during rewind/advance.

Advance/ rewind

Press 4 to rewind, 2 to advance. If playback is paused, the panorama rewinds or advances a segment at a time; keep the button pressed for continuous rewind or advance.

Return to full-frame playback

/K Press 1 or K to exit to full-frame playback.

52

z

Selective Color Take black-and-white pictures in which one hue appears in a color.

1 Choose Select color.

2 Choose a color.

3 Take pictures. Press the shutter-release button all the way down to take pic- tures. Only the selected hue will appear in color; all other hues will be recorded in shades of gray.

Press & to display the & (feature) menu, then highlight Select color and press J.

Use the multi selector to choose a color and press J.

53

z

Cross Process Select a base hue to take pictures with modified colors.

1 Select Hue.

2 Choose a color.

3 Take pictures. Press the shutter-release button all the way down to take pic- tures with modified colors.

Press & to display the & (feature) menu, then highlight Hue and press J.

Use the multi selector to choose a base color (red, green, blue, or yellow) and press J.

y

54

y

Recording and Viewing Movies

Use the movie-record button to record movies in auto, creative, and advanced movie mode.

1 Turn the camera on.

2 Choose a shooting mode.

3 Frame the opening shot.

Recording Movies

Press the power switch to turn the camera on.

Rotate the mode dial to C (auto), w (creative), or v (advanced movie) as described on page 6. In advanced movie mode, you can choose a movie type using the Advanced movie option in the & menu (0 57).

Frame the opening shot with your subject in the center of the display. If Slow motion is selected in advanced movie mode (0 57), press the shutter- release button halfway to focus.

A The 0 Icon A 0 icon indicates that movies can not be recorded.

55

y

4 Start recording.

5 End recording.

Press the movie-record button to begin recording. A recording indica- tor, the time elapsed, and the time available are displayed while record- ing is in progress.

A Audio Recording Be careful not to cover the microphone and note that the built-in microphone may record sounds made by the camera or lens. Except when recording slow- motion movies, the camera focuses con- tinuously; to avoid recording focus noise, select Single AF for Focus mode in the movie menu (0 155).

Movie-record button

Recording indicator/ Time elapsed

Time available

Press the movie-record button again to end recording. Recording will end automatically when the maximum length is reached (0 167), the mem- ory card is full, another mode is selected, the lens is removed, or the camera becomes hot (0 xvii). Movie-record button

AMaximum Length The camera can record movies up to 4 GB in size (for more informa- tion, see page 167); note that depending on memory card write speed, shooting may end before this length is reached (0 194).

56

y

Shooting Mode Movies can be recorded in the shooting modes listed below. Movies can not be recorded in best moment capture or Motion Snapshot modes.

C Auto mode (0 28) Choose this mode to leave the camera in charge of choosing settings. The camera automatically adjusts settings according to the subject and situation.

w Creative mode (0 38) Record movies in exposure mode P (programmed auto). If Creative Palette is selected, the chosen effect will be applied to the movie (0 47).

v Advanced movie mode (0 57) Choose an exposure mode (0 142) and adjust shutter speed or aperture, or record movies in slow or fast motion or with other special effects.

AMovie Sound The Movie sound options item in the movie menu offers microphone sensitivity and wind noise options (0 168).

A Available Settings For information on the options available in advanced movie mode, see page 202.

57

y

Advanced Movie Options In v (advanced movie) mode, the fol- lowing options can be accessed by press- ing & and selecting Advanced movie in the & (feature) menu.

0 HD movie Record high-definition (HD) movies.

y Slow motion

Record up to about three seconds of silent slow- motion footage. Slow-motion movies are recorded at 400 fps and play back at about 30 fps.

1 Fast motion

Record silent fast-motion footage that plays back at about four times normal speed. Playback time is one quarter the recording time.

2 Jump cut

Record silent jump-cut movies. Recording pauses every other second for a drop-frame effect.

3 4-second movie Record a 4-second movie clip. Multiple clips can be joined into a single movie using the Combine 4-sec- ond movies option in the playback menu (0 137).

Recording

Playback

Recording

Playback

Recording

Playback

58

y

A The & (Feature) Menu (0 10) Pressing & in advanced movie mode displays the items listed below. The items available vary with the type of movie selected (0 57).

1 Shooting mode......................................6 2 Advanced movie .................................57

Exposure mode................................. 142 3 Shutter speed................................42, 44 4 Aperture .........................................43, 44 5 ISO sensitivity.................................... 175 6 Picture Control.................................. 176

White balance ................................... 170 Frame size/frame rate ..................... 167 Slow motion ...................................... 166

A Slow Motion When slow motion is selected in advanced movie mode, the camera can be focused by pressing the shutter-release button halfway before recording begins. The camera focuses on the subject at the center of the display; face detection (0 34) is not available. Focus and exposure can not be adjusted during recording. Frame rate options are described on page 166.

ARecording Time The following table lists the approximate maximum recording times for individual movies shot at the default frame rate in each shooting mode.

Auto mode 20 minutes

Creative mode 20 minutes Advanced movie mode HD movie 20 minutes

Slow motion 3 seconds Fast motion 20 minutes Jump cut 20 minutes

4-second movie 4 seconds

1 2

6

3 4 5

59

y

Taking Photographs During Movie Recording Press the shutter-release button all the way down to take a photograph without interrupting movie recording. Photo- graphs taken during movie recording have an aspect ratio of 3 : 2.

A Taking Photographs During Movie Recording Up to 20 photographs can be taken with each movie shot. Please note that photographs can not be taken with slow-motion movies.

A Focus Lock If Single AF is selected for Focus mode in the movie menu for advanced movie mode, focus will lock while the shutter-release button is pressed halfway (0 160).

A See Also See page 168 for information on configuring the camera to take photo- graphs automatically during movie recording.

60

y

Viewing Movies Movies are indicated by a 1 icon in full-frame playback (0 31). Press 3 to start playback.

The following operations can be performed:

1 icon/Length Movie playback indicator/

Current position/total length

Volume Guide

To Use Description

Pause Pause playback.

Play J Resume playback when the movie is paused or during rewind/advance.

Advance/ rewind

Press 4 to rewind, 2 to advance. Speed increases with each press, from 2 to 4 to 8 to 16. If playback is paused, the movie rewinds or advances one frame at a time; keep the button pressed for continuous rewind or advance.

Adjust volume

Rotate the multi selector to adjust volume.

Return to full-frame playback

/K Press 1 or K to exit to full-frame playback.

61

y Deleting Movies To delete the current movie, press O. A confirmation dialog will be displayed; press O again to delete the movie and return to playback, or press K to exit without deleting the movie. Note that once deleted, movies can not be recovered.

A The & (Feature) Menu (0 10) The following options can be accessed by pressing & when a movie is displayed:

1 Start slide show ................................ 111 2 Wi-Fi upload ........................................ 93 3 Protect................................................. 131 4 Rating.................................................. 131 5 Edit movie .......................................... 135

1 2

3

4

5

O button

62

y

A See Also See page 135 for information on trimming unwanted footage from movies. For information on the frame size and frame rate options avail- able for HD movies, see page 167.

DRecording Movies Flicker, banding, or distortion may be visible in the display and in the final movie under fluorescent, mercury vapor, or sodium lamps or if the camera is panned horizontally or an object moves at high speed through frame (flicker and banding can be reduced by choosing a Flicker reduction option that matches the frequency of the local AC power supply as described on page 188, but note that the slowest shut- ter speed available is 1/100 s at 50 Hz, 1/60 s at 60 Hz; flicker reduction is not available with slow-motion movies). Bright light sources may leave after-images when the camera is panned. Jagged edges, color fringing, moir, and bright spots may also appear. When recording movies, avoid pointing the camera at the sun or other strong light sources. Fail- ure to observe this precaution could result in damage to the cameras internal circuitry.

63

R

R

Other Shooting Modes In addition to the modes described above, the camera offers u (best moment capture) mode to help with hard-to-time shots and a z (Motion Snapshot) mode that combines photographs with brief movie vignettes (0 74).

Choose a shot from 20 frames recorded to temporary storage shortly before or after the shutter is released (Active Selection), choose the moment to release the shutter as the scene plays back in slow motion (slow view), or let the camera choose the best shot based on composition and movement (Smart Photo Selector).

Choosing a Shot Manually (Active Selection) Choose up to 20 shots from 20 frames recorded shortly before or after the shutter-release button is pressed all the way down.

u Choosing the Moment (Best Moment Capture)

64

R

1 Select u mode.

2 Choose Active Selection.

3 Frame the photograph.

Rotate the mode dial to u (best moment capture).

Press & (feature) to display the & menu. Highlight Best moment cap- ture and press J, then highlight Active Selection and press J.

Compose the photograph with your subject in the center of the frame.

65

R

4 Begin buffering photographs.

5 Shoot.

6 Select up to 20 frames.

7 Save the selected frames. Press J to save the selected frames to the memory card. The memory card access lamp will light while recording is in progress; note that depending on shooting conditions and memory card write speed, some time may be required to save the selected images.

Press the shutter-release button half- way to focus (0 29). A & icon will be displayed as the camera begins recording images to the memory buffer.

Smoothly press the shutter-release button the rest of the way down. The 20 frames recorded to the buffer in the moments before and after the shutter- release button was pressed all the way down will be copied to temporary storage.

Press 4 or 2 to scroll through the frames and press 1 or 3 to select or deselect. Selected images are indi- cated by a p icon, while the remaining images are marked with O icons to show that they will be deleted.

66

R

A Active Selection At default settings, the frame recorded at the moment the shutter- release button was pressed all the way down is automatically marked with a p icon in Step 6.

A The & (Feature) Menu (0 10) Pressing & in best moment capture mode displays the items listed below. The items available vary with the mode selected (0 63, 67, 69).

1 Shooting mode......................................6 2 Best moment capture ........................63

Exposure mode................................. 142 3 Shutter speed................................42, 44 4 Aperture .........................................43, 44 5 ISO sensitivity.................................... 175 6 On release, record ............................ 146

Capture 20 frames over .................. 146 Frames saved (default) ................... 146 Number of shots saved................... 146

A Available Settings For information on the options available in best moment capture mode, see page 202.

ABest Moment Capture Mode Movies can not be recorded, and pressing the movie-record button has no effect. The flash can not be used.

A See Also See page 146 for information on adjusting settings for Active Selection.

1 2

6

3 4 5

67

R

Choosing Your Moment (Slow View) When slow view is selected in u (best moment capture) mode, the camera captures a short sequence of still images and plays them back in slow motion so that you can choose the precise moment for a photograph.

1 Select u mode.

2 Select Slow view.

3 Frame the photograph.

Rotate the mode dial to u (best moment capture).

Press & (feature) to display the & menu. Highlight Best moment cap- ture and press J, then highlight Slow view and press J.

Compose the photograph with your subject in the center of the frame.

68

R

4 Press the shutter-release button halfway. After focusing, the camera will record 20 frames to a temporary memory buffer. It will then slowly play them back in a continuous loop while the shutter-release button is kept pressed halfway. A & icon is displayed in the monitor.

Progress indicator

When the desired frame is displayed, press the shutter-release button the rest of the way down to record the cur- rent frame and discard the remaining images. The selected frame will be dis- played for a few seconds when record- ing is complete. To delete the buffer contents and exit without recording a photograph, release the button with- out pressing it the rest of the way down.

69

R

Letting the Camera Choose the Moment (Smart Photo Selector) The Smart Photo Selector helps you capture a fleeting expres- sion on the face of a portrait subject or other hard-to-time shots such as group photos in party scenes. Each time the shutter is released, the camera automatically selects the best shot and four best shot candidates based on composition and motion.

1 Select u mode.

2 Choose Smart Photo Selector.

Rotate the mode dial to u (best moment capture).

Press & (feature) to display the & menu. Highlight Best moment cap- ture and press J, then highlight Smart Photo Selector and press J.

70

R

3 Frame the photograph.

4 Begin buffering photographs.

5 Shoot. Smoothly press the shutter-release button the rest of the way down. The camera will compare shots recorded to the buffer both before and after the shutter-release button was pressed all the way down, and select five to copy to the memory card. Note that some time may be required. The best pic- ture is displayed in the monitor when recording is complete.

Compose the photograph with your subject in the center of the frame.

Press the shutter-release button half- way to focus (0 29). A & icon will be displayed as the camera begins recording images to the memory buffer. The camera continuously adjusts focus to account for changes in the distance to the subject while the shutter-release button is pressed halfway.

71

R

A Smart Photo Selector The camera automatically chooses a scene mode appropriate to the subject.

ABuffering Buffering begins when the shutter-release button is pressed halfway and ends after about 90 seconds or when the shutter-release button is pressed all the way down.

D Smart Photo Selector Files Do not delete the NCSPSLST.LST file from the NCFL folder on the memory card or change the file names of images taken with the Smart Photo Selector. The camera will no longer recognize the affected files as Smart Photo Selector images and will instead handle them as indepen- dent photographs.

A See Also Use the Number of shots saved option in the shooting menu to choose the number of shots selected by the Smart Photo Selector (0 146).

Shutter-release button pressed

halfway to focus

Shutter-release button pressed all the way

down Shooting ends

Buffering

72

R

Viewing Photos Taken with the Smart Photo Selector

Choosing the Best Shot

Press K and use the multi selector to dis- play photographs taken with the Smart Photo Selector (0 31; pictures taken with the Smart Photo Selector are indicated by a y icon). Of the photographs recorded by the Smart Photo Selector, only the best shot will be displayed (when you press 2 to view the next picture, the camera will skip over the best shot candi- dates, with the result that the next pic- ture displayed will not have a file number that immediately follows that of the cur- rent picture). To end playback and return to shooting mode, press the shutter- release button halfway.

K button

When a photograph taken with the Smart Photo Selector is displayed, you can choose the best shot by pressing 3. Press 4 or 2 to view the other pictures in the sequence and press J to select the cur- rent picture as the best shot. To return to normal playback, press D.

73

R

Deleting Pictures Pressing O when a picture taken with the Smart Photo Selector is selected displays a confirmation dialog; press O again to delete the best shot and the best shot candidates, or press K to exit without deleting the pictures. Note that once deleted, pictures can not be recovered.

ADeleting Individual Photographs Pressing the O button in the best shot selec- tion dialog displays the following options; highlight an option using the multi selector and press J to select. This image: Delete the current photo (note

that the picture currently selected as the best shot can not be deleted).

All except best shot: Delete the best shot candidates, but not picture cur- rently selected as the best shot.

A confirmation dialog will be displayed; to delete the selected image or images, highlight Yes and press J.

O button

74

R

Record brief movie vignettes with your photographs. Each time the shutter is released, the camera records a still image and about 1.6 s of movie footage. When the resulting Motion Snap- shot is viewed on the camera, the movie will play back in slow motion over approximately 4 s, followed by the still image.

1 Select z mode.

2 Frame the picture.

z Combining Photos with Brief Movie Vignettes (Motion Snapshot Mode)

Rotate the mode dial to z (Motion Snapshot).

Compose the photograph with your subject in the center of the frame.

75

R

3 Begin buffering.

4 Shoot. Smoothly press the shutter-release button the rest of the way down. The camera will record a photograph, together with about 1.6 s of movie footage beginning before and ending after the time the shutter-release but- ton was pressed all the way down. Note that some time may be required. When recording is complete, the pho- tograph will be displayed for a few seconds.

Press the shutter-release button half- way to focus (0 29). A & icon will be displayed as the camera begins recording footage to the memory buffer.

ABuffering Buffering begins when the shutter-release button is pressed halfway and ends after about 90 seconds or when the shutter-release button is pressed all the way down.

Shutter-release button pressed

halfway to focus

Shutter-release button pressed all the way

down Shooting ends

Buffering

76

R

A The & (Feature) Menu (0 10) Pressing & in Motion Snapshot mode displays the following items:

1 Shooting mode......................................6 2 Exposure mode................................. 142 3 Shutter speed................................42, 44 4 Aperture .........................................43, 44 5 ISO sensitivity.................................... 175 6 Movie before/after........................... 147

File format.......................................... 148 Audio......................................................77

A Available Settings For information on the options available in Motion Snapshot mode, see page 202.

1 2

6

3 4 5

77

R

Audio To record about four seconds of sound with Motion Snapshots beginning at the start of movie recording, use the multi selector and J button to select Ambient for Audio in the & (feature) menu (0 76). Motion Snapshots can also be recorded with background music (Background music) or no sound (None).

AMotion Snapshot Mode Movies can not be recorded using the movie-record button and the flash can not be used.

A See Also See page 147 for information on choosing what portions of the buffer are included in the movie footage. For information on saving Motion Snapshots in a format that can be viewed in most movie playback soft- ware, see page 148. See page 138 for information on combining the movie portions of multiple Motion Snapshots into a single movie.

78

R

Viewing Motion Snapshots

Deleting Motion Snapshots To delete the current Motion Snapshot, press O. A confirmation dialog will be dis- played; press O again to delete the photo and movie and return to playback, or press K to exit without deleting the file. Note that once deleted, Motion Snapshots can not be recovered.

Press K and use the multi selector to dis- play a Motion Snapshot (0 31; Motion Snapshots are indicated by a z icon). Pressing 3 when a Motion Snapshot is displayed plays back the movie portion in slow motion over a period of about 4 s, followed by the photo; playback is accompanied by the audio track selected using the Audio option (0 77). To end playback and return to shooting mode, press the shutter-release button halfway.

K button

O button

79

t

t

More on Photography This section describes other features you can use when taking pictures.

Shoot a continuous series (burst) of photographs.

1 Display release mode options.

2 Select I.

3 Select a frame rate.

4 Frame your subject and shoot.

Continuous Mode

Press 4 (C) to display release mode options.

Highlight I (continuous) and press 2 to display frame rate options.

Highlight the desired frame rate and press J. Frame rate is expressed in terms of the number of f rames recorded per second (fps); choose from frame rates of approximately 5, 10, 20, 30, and 60 fps (I, Q, R, S, and T, respectively). Except when I is selected, the maximum number of shots that can be recorded in a single burst is 20.

Press the shutter-release button all the way down to shoot the burst.

80

t

D Continuous Mode Only one picture will be taken if the flash fires when I is selected; at settings of 10, 20, 30, and 60 fps, the built-in flash will not fire.

While photographs are being recorded to the memory card, the mem- ory card access lamp will light. Depending on shooting conditions and memory card write speed, recording may take some time. If the battery is exhausted before all photographs are recorded, the shutter release will be disabled and the remaining images transferred to the memory card.

Continuous shooting is not available in creative modes other than P, S, A, or M, in best moment capture, advanced movie, or Motion Snapshot mode, or when live image control is used in auto mode (0 36).

ABuffer Size The camera is equipped with a memory buffer for temporary storage, allowing shoot- ing to continue while photographs are being saved to the memory card. The approximate number of images that can be stored in the memory buffer at current settings is dis- played while the shutter-release button is pressed halfway (this number is an approximation only and varies with shooting conditions). The illustration shows the display when space remains in the buffer for about 20 pictures.

A Single Frame To take only one picture each time the shutter-release button is pressed all the way down, select 8 (single frame) for release mode.

81

t

The self-timer is used to delay shutter release until 10 or 2 sec- onds after the shutter-release button is pressed all the way down.

1 Display release mode options.

2 Select E.

3 Select the desired self-timer option.

4 Mount the camera on a tripod. Mount the camera on a tripod or place the camera on a sta- ble, level surface.

Self-Timer Modes

Press 4 (C) to display release mode options.

Highlight E (self-timer) and press 2 to display self-timer options.

Use the multi selector to highlight c or a and press J.

82

t

5 Frame the photograph and shoot.

Note that the timer may not start or a photograph may not be taken if the camera is unable to focus or in other situations in which the shutter can not be released. Turning the camera off cancels the self-timer.

Press the shutter-release button half- way to focus, and then press the but- ton the rest of the way down. The self- timer lamp will start to flash and a beep will begin to sound. Two sec- onds before the photo is taken, the lamp will stop flashing and the beep- ing will become more rapid.

AMovie Mode To record movies using the self-timer, select advanced movie mode and use the movie-record button to start the timer. Movie recording ends when the movie-record button is pressed a second time.

ARaising the Flash In P, S, A, or M mode, press the flash pop-up button to raise the flash before shooting. Shooting will be interrupted if the flash is raised while the timer is counting down.

A See Also For information on controlling the beeps that sound when the self- timer is used, see page 187.

83

t

Exposure compensation is used to alter exposure from the value suggested by the camera, making pictures brighter or darker.

1 Display exposure compensation options.

2 Choose a value.

Normal exposure can be restored by setting exposure compen- sation to 0. In modes P, S, and A, exposure compensation is not reset when the camera is turned off.

Exposure Compensation

1 EV No compensation +1 EV

Press 2 (E) to display exposure com- pensation options.

Use the multi selector to choose from values between 3 EV (underexpo- sure) and +3 EV (overexposure) in increments of 1/3 EV. In general, posi- tive values make the image brighter while negative values make it darker.

A Exposure Compensation Exposure compensation is most effective when used with center- weighted or spot metering (0 149).

A The Built-in Flash When used with the built-in flash, exposure compensation affects both background exposure and flash level.

84

t

Use the built-in flash for additional lighting when the subject is poorly lit or to fill-in (illuminate) back-lit subjects. The built-in flash is available in the following shooting modes, but note that some camera settings automatically disable the built-in flash:

Auto Pop-up Modes In C (auto) mode and when soft, miniature effect, selective color, cross process, or toy camera effect is selected in w (cre- ative) mode, the flash will pop-up automatically and fire when required.

1 Choose a flash mode.

2 Take pictures.

The Built-in Flash

Press 3 (N) on the multi selector to display a list of flash modes, then use the multi selector to highlight the desired mode and press J to select.

Press the shutter-release button half- way to focus and the rest of the way down to shoot. The flash will pop up and fire when required.

85

t

Flash Modes The following flash modes are available in C (auto), q (soft), r (miniature effect), s (selective color), 6 (cross process), and 7 (toy camera effect) modes: o (auto flash): When lighting is poor or the subject is backlit,

the flash pops up automatically when the shutter-release but- ton is pressed halfway and fires as required.

n (auto with red-eye reduction): Use for portraits. The flash pops up and fires as required, but before it fires, the red-eye reduction lamp lights to help reduce red-eye.

s (off ): The flash does not fire.

86

t

Manual Pop-up Modes When P, S, A, or M is selected in w (creative) mode, the flash must be raised manually. The flash will not fire if it is not raised.

1 Raise the flash.

2 Choose a flash mode.

3 Take pictures.

Press the flash pop-up button to raise the flash.

Flash pop-up button

Press 3 (N) on the multi selector to display a list of flash modes, then use the multi selector to highlight the desired mode and press J to select.

The flash will fire with every shot. To disable the flash, press it gently down- ward until it latches.

87

t

Flash Modes The following flash modes are available when P, S, A, or M is selected in w (creative) mode: N (fill flash): The flash fires with every shot. NY (red-eye reduction): Use for portraits. The flash fires with

every shot, but before it fires, the red-eye reduction lamp lights to help reduce red-eye.

NYp (red-eye reduction with slow sync): As for red-eye reduction, above, except that shutter speed slows automati- cally to capture background lighting at night or under low light. Use when you want to include background lighting in portraits. Available only in modes P and A.

Np (fill flash + slow sync): As for fill flash, above, except that shutter speed slows automatically to capture background lighting at night or under low light. Use when you want to cap- ture both subject and background. Available only in modes P and A.

Nr (rear curtain + slow sync): As for rear-curtain sync, below, except that shutter speed slows automatically to capture back- ground lighting at night or under low light. Use when you want to capture both subject and background. Available only in modes P and A.

Nq (rear-curtain sync): The flash fires just before the shutter closes, creating a stream of light behind moving light sources as shown below at right. Available only in modes S and M.

s (off ): The flash does not fire. Available only when built-in flash is raised.

Front-curtain sync Rear-curtain sync

88

t

DRaising the Flash When using the flash, be sure it is fully raised as shown at right. Do not touch the flash dur- ing shooting.

A Lowering the Built-in Flash To save power when the flash is not in use, press it gently downward until the latch clicks into place. Do not use force. Failure to observe this precaution could result in prod- uct malfunction.

A The Flash-Ready Indicator The flash-ready indicator (N) lights to show that the flash is fully charged when the shutter-release button is pressed halfway.

A Preventing the Built-in Flash from Firing Lowering the flash prevents it firing in modes P, S, A, and M. The flash can also be turned off by selecting a flash mode of s (off ).

89

t

AUsing the Built-in Flash If the flash is fired multiple times in quick succession, the flash and shutter may be temporarily disabled to protect the flash. Shooting can be resumed after a brief pause.

Objects close to the camera may be overexposed in photographs taken with the flash at high ISO sensitivities.

To avoid vignetting, remove lens hoods and shoot at ranges of at least 0.6 m (2 ft). Some lenses may cause vignetting at greater distances or obstruct the red-eye reduction lamp, interfering with red-eye reduc- tion. The following illustrations show the effect of vignetting caused by shadows cast by the lens when the built-in flash is used.

Shadow Shadow

A See Also See page 163 for information on adjusting flash level.

A Aperture, Sensitivity, and Flash Range Flash range varies with sensitivity (ISO equivalency) and aperture.

90

t

Auto Mode Choose from the following options.

Creative Mode The operation performed by tapping the display depends on whether the camera is in autofocus or manual focus mode.

Autofocus Modes The following options are available in autofocus modes (AF-A, AF-S, and AF-C).

Tap Shooting Options

Tap the icon shown at right to choose the operation performed by tapping the monitor in shooting mode. The options available vary with the shooting and focus mode.

3 When you tap a subject in the display, the camera will focus and take a picture.

7 Tapping the display during shooting has no effect.

3 When you tap a subject in the display, the camera will focus and take a picture.

4 Tap the display to position the focus area when single-point AF is selected for AF-area mode (0 159). To focus, press the shutter- release button halfway.

6 Tap a subject to start tracking when subject tracking is selected for AF-area mode (0 159).

7 Tapping the display during shooting has no effect.

91

t

Manual Focus Mode The following options are available in manual focus mode.

Advanced Movie Mode The operation performed by tapping the display depends on whether the camera is in autofocus or manual focus mode.

Autofocus Modes The following options are available in autofocus modes (AF-F and AF-S).

Manual Focus Mode The following options are available in manual focus mode.

3 When you tap the display, the camera will take a picture without first adjusting focus.

5 Tap a subject to display it at a higher magnification in the moni- tor (0 157).

7 Tapping the display during shooting has no effect.

8 To focus when auto-area AF or single-point AF is selected for AF- area mode, tap your subject in the display.

6 Tap a subject to start tracking when subject tracking is selected for AF-area mode (0 159).

9 Tapping the display during shooting has no effect.

5 Tap a subject to display it at a higher magnification in the moni- tor (0 157).

9 Tapping the display during shooting has no effect.

92

t

DBest Moment Capture/Motion Snapshot Tap shooting options are not available in best moment capture and Motion Snapshot modes.

D Taking Pictures Using Tap Shooting Options Avoid tapping too hard. The camera may move when the shutter is released, blurring photographs.

The shutter-release button can be used to focus and take pictures even when the 3 icon is displayed to show that tap shooting options are active. Use the shutter-release button to take photographs in continu- ous shooting mode (0 79) and during movie recording. Tap shooting options can be used only to take pictures one at a time in continuous shooting mode and can not be used to take photographs during movie recording. In self-timer mode (0 81), tapping the monitor locks focus and starts the timer; the photograph will be taken after ten or two sec- onds.

93

T

T

Wi-Fi

The camera can connect via Wi-Fi wireless networks to a smart device running Nikons dedicated Wireless Mobile Utility app (0 94). The smart device can be used to control the camera and take pictures remotely, or pictures can be downloaded from the camera to the smart device and shared with others on the Inter- net. Pictures can also be uploaded from the camera to the smart device (0 99).

What Wi-Fi Can Do for You

Download pictures Share pictures

Remote control

94

T

Before connecting via Wi-Fi (wireless LAN), install the Wireless Mobile Utility on your Android or iOS smart device. Instructions for accessing the camera vary with the type of connection used by the smart device. Android Push-button WPS: If the smart device supports push-button WPS

(i.e., has a WPS button connection option in its Wi-Fi settings menu), you can use this easy method to connect to the smart device (0 95)

PIN-entry WPS: If the smart device supports WPS, you can use the camera to establish a connection by entering the PIN displayed by the smart device (0 96)

View SSID: If the smart device does not support WPS, you can connect by selecting the camera SSID on the smart device (0 97)

iOS View SSID: Connect by selecting the camera SSID on the smart

device (0 97)

Accessing the Camera

A Installing the Wireless Mobile Utility App 1 Find the app.

On the smart device, connect to the Google Play service, the App Store, or another app marketplace and search for Wireless Mobile Utility. For more information, see the instructions provided with the smart device.

2 Install the app. Read the app description and install the app. A pdf manual for the Wireless Mobile Utility is available for download at the following URLs: Android: http://nikonimglib.com/ManDL/WMAU/ iOS: http://nikonimglib.com/ManDL/WMAU-ios/

AWPS WPS (Wi-Fi Protected Setup) is a standard designed to make it easy to establish a secure wireless network. For information on the steps involved and the length of time the smart device will wait for a connec- tion, see the documentation supplied with the smart device.

95

T

WPS (Android Only)

1 Select Wi-Fi.

2 Connect.

3 Launch the Wireless Mobile Utility. Launch the Wireless Mobile Utility on the smart device. The main dialog will be displayed.

Press the G button to display the menus, then highlight Wi-Fi and press J.

Enable WPS button connections on the camera and smart device: Camera: Highlight Wi-Fi connection

type and press 2, then highlight Push-button WPS and press 2 to ready the camera for a WPS connec- tion. The camera will wait about two minutes for a WPS connection request from the smart device. To extend the wait time, press J.

Smart device: Select Wi-Fi settings > WPS button connection.

96

T

PIN Entry (Android Only)

1 Select Wi-Fi.

2 Select Wi-Fi connection type > PIN-entry WPS.

3 Enter the PIN. Enter the PIN displayed by the smart device. Press 4 or 2 to highlight digits and press 1 or 3 to change. Press J when entry is complete.

4 Launch the Wireless Mobile Utility. Launch the Wireless Mobile Utility on the smart device. The main dialog will be displayed.

Press the G button to display the menus, then highlight Wi-Fi and press J.

Highlight Wi-Fi connection type and press 2.

Highlight PIN-entry WPS and press 2.

97

T

SSID (Android and iOS)

1 Select Wi-Fi.

2 Select Connect.

3 Select Yes.

4 Select the camera SSID on the smart device. Select the camera SSID in the list of networks displayed by the smart device.

Press the G button to display the menus, then highlight Wi-Fi and press J.

Highlight Connect and press 2.

Highlight Yes and press J to view the camera SSID.

98

T

5 Launch the Wireless Mobile Utility. Launch the Wireless Mobile Utility on the smart device. The main dialog will be displayed.

Restoring Default Settings To restore default network settings, highlight Wi-Fi connection type > Reset Wi-Fi settings and press 2. A confirmation dialog will be displayed; highlight Yes and press J to restore default network settings.

DWi-Fi Before using the Wi-Fi function, read the warnings on pages xix to xxi; to prevent loss of power while connected, you should also charge the camera battery. Do not use Wi-Fi in settings in which its use is prohib- ited. Note that the camera Wi-Fi function can not be used when a USB or HDMI cable is connected.

A Terminating Wi-Fi Connections Wi-Fi will terminate automatically if the smart device does not initiate a connection within five minutes. To terminate Wi-Fi manually, press the G button to exit the Wi-Fi standby or connection display.

99

T

Follow the steps below to upload photos from the camera to a smart device. Movies can not be selected for upload.

Uploading Photos One at a Time Use the Wi-Fi upload option in the playback & (feature) menu (0 10) to upload the photo currently displayed in full-frame playback.

1 Display the photo on the camera. Display the desired photo in full-frame playback.

2 Select Wi-Fi upload.

3 Select Yes.

4 Select the camera SSID on the smart device. Select the camera SSID in the list of networks displayed by the smart device.

Uploading Pictures to a Smart Device

Press & (feature) to display the & menu, then highlight Wi-Fi upload and press J. A confirmation dialog will be displayed.

Highlight Yes and press J. To upload multiple selected photos, choose Select images from list and proceed to Step 2 on page 101.

100

T

5 Download the photo to the smart device. Launch the Wireless Mobile Utility on the smart device and follow the on-screen instructions to download the photo. When download is complete, press the G button on the camera to terminate the Wi-Fi connection.

101

T

Uploading Multiple Selected Photos To upload multiple selected photos, use the Wi-Fi upload option in the playback menu.

1 Choose Wi-Fi upload.

2 Select photos.

3 Press J. Press J to complete the operation. A confirmation dialog will be displayed.

Press the G button to display the menus. Highlight Wi-Fi upload in the playback menu and press 2.

G button

Press 4 or 2 to scroll through pictures and press 3 to select or deselect, or press and hold 1 to view the high- lighted picture full frame. Selected images are indicated by a & icon.

102

T

4 Select Yes.

5 Select the camera SSID on the smart device. Select the camera SSID in the list of networks displayed by the smart device.

6 Download the photos to the smart device. Launch the Wireless Mobile Utility on the smart device and follow the on-screen instructions to download the selected photos. When download is complete, press the G button on the camera to terminate the Wi-Fi connection.

Highlight Yes and press J.

103

I

I

More on Playback

Photo information is superimposed on images displayed in full- frame playback (0 31). The information displayed can be selected using the Display > Playback option in the setup menu (0 186).

Basic Info

Photo Information

Still images Movies

1 2 3

9 10

8 5

4

7 6

212 11

13

1 3

9 10

8 5

4

67

1 Shooting mode 2 Protect status .................................... 131 3 Frame number/total number of

images 4 Image quality.................................... 143

Frame rate................................. 166, 167 5 Image size.......................................... 143

Frame size ................................. 166, 167

6 Folder number-file number ...........105 7 Time of recording ......................25, 189 8 Date of recording.......................25, 189 9 Battery indicator .................................27

10 Rating ..................................................110 11 Movie length........................................60 12 Audio recording indicator ..............168 13 On-screen guide (for movies) ..........60

104

I

Detailed info

Still images

Movies

1 2 3 4

7 6 5

813 12

14 15

11

16

10 9

28 17 18 19

25 26 27

23 2124 2022

29

28

25 26

23 2124 2022

1 2 4

6

5

13 12

3130

14 27 17

3

1 Shooting mode 2 Frame number/total number of

images 3 Protect status.....................................131 4 Camera name 5 Retouch indicator ...........132, 133, 134

Movie edit indicator.........................135 6 Histogram showing distribution of

tones in image .................................105 7 ISO sensitivity ....................................175 8 Focal length .......................................223 9 Flash mode.................................... 85, 87

10 Flash control.......................................162 11 Flash compensation.........................163 12 Exposure compensation ...................83

13 Metering .............................................149 14 Creative mode ..................................... 38

Exposure mode .................................142 15 Shutter speed ............................... 42, 44 16 Aperture......................................... 43, 44 17 Picture Control ..................................176 18 Active D-Lighting indicator............152 19 HDR indicator ...................................... 48 20 Image quality ....................................143

Frame rate .................................166, 167 21 Image size...........................................143

Frame size..................................166, 167

105

I

22 Folder number-file number 23 Time of recording ......................25, 189 24 Date of recording.......................25, 189 25 Battery indicator .................................27 26 White balance....................................170

White balance fine-tuning .............171

27 Color space.........................................151 28 Rating ..................................................110 29 Auto distortion control ...................150 30 Electronic VR......................................154 31 Audio recording indicator ..............168

A Folder and File Numbers Photographs are stored as files with names containing a four-digit number between 0001 and 9999 assigned automatically in ascending order by the camera. These in turn are stored in folders containing up to 999 images. A new folder is created automatically when file number- ing reaches 9999 or the number of images in the current folder reaches 999.

Folder number File number

AHistograms (0 104) Camera histograms are intended only as a guide and may differ from those in imaging applications. Sample histograms are shown below: If brightness varies evenly across the

image, the distribution of tones will be relatively even.

If the image is dark, tone distribu- tion will be shifted to the left.

If the image is bright, tone distribu- tion will be shifted to the right.

Exposure compensation shifts the distribution of tones to the right when raised, to the left when lowered. Histograms can give you a rough idea of overall exposure when bright ambient lighting makes it difficult to see the display in the monitor.

100-0001

106

I

To view pictures in contact sheets of 4, 9, or 16 images, press J when a picture is displayed full frame and rotate the multi selec- tor counterclockwise.

The following operations can be performed:

Thumbnail Playback

To Use Description

Display more images

Rotate the multi selector counterclockwise to increase the number of images displayed from 1 to 4, from 4 to 9, or from 9 to 16. To view images taken on selected dates (0 107), rotate the selector counterclock- wise when 16 images are displayed.

Display fewer images

Rotate the multi selector clockwise to reduce the number of images displayed from 16 to 9 or 9 to 4. To view the high- lighted image full frame, rotate the selector clockwise when 4 images are displayed.

Highlight images

Use the multi selector to highlight images. You can delete (0 109) the highlighted image or zoom in for a closer look (0 108).

View highlighted

image J

Press J to view the highlighted image full frame.

Delete highlighted

image O See page 109.

107

I

To view pictures taken on a selected date, rotate the multi selec- tor counterclockwise when 16 pictures are displayed (0 106).

The following operations can be performed:

Calendar Playback

To Use Description

Display calendar

To view the calendar, rotate the multi selec- tor counterclockwise when 16 images are displayed (0 106).

Exit to thumbnail playback

To return to the 16-image display, rotate the multi selector clockwise when the calendar is displayed.

Highlight date Use multi selector to highlight date in calen- dar display.

View pictures taken on

highlighted date

J Press J to view the first picture taken on the highlighted date.

Delete pictures taken on

highlighted date

O Press O to delete all pictures taken on the highlighted date.

108

I

To zoom in on a photograph, display it full frame and press J and rotate the multi selector clockwise. Playback zoom is not available with movies or Motion Snapshots.

The following operations can be performed:

Playback Zoom

To Use Description

Zoom in Rotate the multi selec- tor clockwise to zoom in, counterclockwise to zoom out. Whenever you zoom in or out, a navigation window will appear with the area currently visible in the display indicated by a yel- low border. Press 1, 3, 4, or 2 to scroll the image.

Zoom out

View other areas of image

View faces

Faces (up to five) detected during face priority are indicated by white borders in the navigation window. Press 4 or 2 to view other faces.

Exit zoom J Return to full-frame playback.

A See Also The Face-priority zoom option in the playback menu (0 135) is used to choose whether the multi selector to be used to scroll from face to face during face-priority zoom.

109

I

Pictures can be deleted from the memory card as described below. Note that once deleted, pictures can not be recovered; pro- tected images, however, will not be deleted.

Deleting the Current Picture

The Playback Menu To delete multiple images, press the G button, select Delete in the playback menu, and choose from the options below. A confirmation dialog will be displayed; select Yes to delete the images (note that some time may be required if a large number of images is selected).

Deleting Pictures

To delete the picture currently displayed in full-frame playback or selected in the thumbnail list, press O. A confirmation dialog will be displayed; press O again to delete the picture and return to playback, or press K to exit without deleting the picture. O button

Delete selected images Highlight images and press 3 to select or dese- lect (0 130). Press J to exit when the selection is complete.

Delete all images Delete all pictures on the memory card.

110

I

Rate pictures or mark them as candidates for later deletion. Rat- ing is not available with protected images.

1 Select a picture. Display a picture in full-frame playback.

2 Select Rating.

3 Choose a rating.

Rating Pictures

Press & (feature) to display the & menu. Highlight Rating and press J.

Highlight a rating of from zero to five stars, or select ) to mark the picture as a candidate for later deletion. Press J to select the highlighted rating.

111

I

1 Select the type of image used in the show. Highlight the desired option and press J.

Slide Shows

To view a slide show of the pictures on the memory card, press the G button, select Slide show in the playback menu, and follow the steps below.

G button

All images Display all the images on the memory card.

Still images Display still images only. Images taken using Easy panorama will be displayed in panorama mode (0 51).

Movies Display movies and Motion Snapshots recorded with MOV file selected for File format (0 148).

Motion Snapshot

Display Motion Snapshots recorded with NMS files selected for File format (0 148). Only the movie portion will be played; the associated photographs are not displayed.

Select images by date

Display only images recorded on a selected date. A calendar will be displayed; use the multi selector to highlight a date.

112

I

2 Adjust display times and audio settings. Adjust the following options:

3 Select Start.

Frame interval Choose how long each still image is displayed.

Movie playback time

Choose how much of each movie is played back before the next slide is displayed. Choose Same as frame interval to display the next slide after the time selected for Frame interval, No limit to play back the entire movie before displaying the next slide.

Audio

Mute audio playback, or select Movie sound tracks to play audio recorded with movies and with Motion Snapshots recorded with Ambient selected for Audio (0 77). No sound is played for still images.

Highlight Start and press J to start the slide show.

113

I

The following operations can be performed while a slide show is in progress:

The options shown at right are dis- played when the show ends. Select Resume to restart or Exit to exit to the playback menu.

To Use Description

Skip back/skip ahead

Press 4 to return to the previous frame, 2 to skip to the next frame.

Pause/resume J Pause the show. Press again to resume.

Adjust volume Rotate the multi selector to adjust vol- ume.

Exit to playback mode

K End the show and return to playback mode.

Q

114

Q

Connections

Install the supplied software to copy pictures to your computer for viewing and editing. Before installing the software, confirm that your system meets the requirements on page 116.

1 Launch the installer. Start the computer, insert the ViewNX 2 installer CD, and launch the installer. A language-selection dialog will be displayed; if the desired language is not avai lable, c l ick R e g i o n Selection to choose a dif- ferent region and then choose the desired language (region selection is not avail- able in the European release).

2 Start the installer. Click Install and follow the on-screen instructions.

Installing the Supplied Software

q Select region (if required)

w Select language e Click Next

Click Install

115

Q

3 Exit the installer. Click Yes (Windows) or OK (Mac) when installation is com- plete.

4 Remove the installer CD from the CD-ROM drive.

Windows Mac

Click Yes Click OK

A Supplied Software Be sure to update to the latest versions of the supplied software. Nikon Message Center 2 will periodically check for updates while the computer is connected to the Internet.

AMotion Snapshots ViewNX 2 is required to view Motion Snapshots saved using the File format > NMS files option in the shooting menu (0 148).

A Supported Operating Systems See the websites listed on page xviii for the latest information on sup- ported operating systems.

116

Q

System Requirements The system requirements for ViewNX 2 are:

Windows

CPU

Photos: Intel Celeron, Pentium 4, Core Series; 1.6 GHz or better

Movies (playback): Pentium D 3.0 GHz or better; Intel Core i5 or better recommended when viewing movies with a frame size of 1280 720 or more at a frame rate of 30 fps or above or movies with a frame size of 1920 1080 or more

Movies (editing): Intel Core i5 or better

OS Pre-installed versions of Windows 8.1, Windows 7, or Windows Vista

Memory (RAM)

32-bit Windows 8.1, Windows 7, or Windows Vista: 1 GB or more (2 GB or more recommended)

64-bit Windows 8.1, Windows 7, or Windows Vista: 2 GB or more (4 GB or more recommended)

Hard disk space A minimum of 1 GB available on the startup disk (3 GB or more recommended)

Graphics Resolution: 1024 768 pixels (XGA) or more (1280 1024 pixels or

more recommended) Color: 24-bit color (True Color) or more

117

Q

Mac

CPU

Photos: Intel Core or Xeon series Movies (playback): Core Duo 2 GHz or better; Intel Core i5

or better recommended when viewing movies with a frame size of 1280 720 or more at a frame rate of 30 fps or above or movies with a frame size of 1920 1080 or more

Movies (editing): Intel Core i5 or better OS OS X 10.9, 10.8, or 10.7

Memory (RAM) 2 GB or more (4 GB or more recommended)

Hard disk space A minimum of 1 GB available on the startup disk (3 GB or more recommended)

Graphics Resolution: 1024 768 pixels (XGA) or more (1280 1024 pixels

or more recommended) Color: 24-bit color (millions of colors) or more

118

Q

Transferring Pictures

1 Choose how pictures will be copied to the computer. Choose one of the following methods: Direct USB connection: Turn the camera off and ensure that the

memory card is inserted in the camera. Connect the camera to the computer using the supplied USB cable (do not use force or insert the connectors at an angle) and then turn the camera on.

Card slot: If your computer is equipped with a slot for microSD memory cards, the card can be inserted directly in the slot.

Card reader: Connect a card reader (available separately from third-party suppliers) to the computer and insert the mem- ory card.

Viewing and Editing Pictures on a Computer

119

Q

2 Start the Nikon Transfer 2 component of ViewNX 2. If a message is displayed prompting you to choose a pro- gram, select Nikon Transfer 2.

3 Click Start Transfer. At default settings, all the pictures on the memory card will be copied to the computer.

4 Terminate the connection. If the camera is connected to the computer, turn the camera off and disconnect the USB cable. If you are using a card reader or card slot, choose the appropriate option in the com- puter operating system to eject the removable disk corre- sponding to the memory card and then remove the card from the card reader or card slot.

AWindows 7 If the following dialog is displayed, select Nikon Transfer 2 as described below.

1 Under Import pictures and videos, click Change pro- gram. A program selection dialog will be displayed; select Import File using Nikon Transfer 2 and click OK.

2 Double-click Import file.

Click Start Transfer

120

Q

Viewing Pictures Pi c t u r e s a re d i s p l aye d i n ViewNX 2 when transfer is com- plete.

Retouching Photographs To crop pictures and perform such tasks as adjusting sharp- ness and tone levels, click the Edit button in the toolbar.

Printing Pictures Click the Print button in the toolbar. A dialog will be dis- played, allowing you to print pictures on a printer connected to the computer.

A Starting ViewNX 2 Manually Windows: Double-click the

ViewNX 2 shortcut on the desk- top.

Mac: Click the ViewNX 2 icon in the Dock.

A For More Information Consult online help for more infor- mation on using ViewNX 2.

121

Q

Connect the camera to a television for playback.

High-Definition Devices A type D High-Definition Multimedia Interface (HDMI) cable (available separately from third-party suppliers) can be used to connect the camera to high-definition video devices.

1 Connect the HDMI cable. Turn the camera off and connect the HDMI cable.

2 Tune the device to the HDMI channel.

3 Turn the camera on. Turn the camera on; the camera monitor will remain off and the camera shooting mode display will appear on the HD device. Pictures can be played back using camera controls as described elsewhere in this manual; note that the edges of images may not be visible in the display.

Viewing Pictures on TV

A Connecting an HDMI Cable Always turn the camera off before connecting or disconnecting HDMI cables. When connecting cables, do not use force or attempt to insert the connectors at an angle.

Connect to HD device (choose cable with appropriate connector)

Connect type D connector to camera

122

Q

HDMI Device Control To control the camera remotely from a device that supports HDMI-CEC (High-Definition Multimedia InterfaceConsumer Electronics Control), select On for HDMI device control in the camera setup menu. For information on using a remote control, see the television manual.

D Close the Connector Cover Close the connector cover when the connectors are not in use. Foreign matter in the connectors can interfere with data transfer.

A Television Playback Volume can be adjusted using the controls on the television; adjusting volume on the camera has no effect. Use of an EH-5b AC adapter and EP-5E power connector (available separately) is recommended for extended playback.

A Electronic VR Electronic vibration reduction (0 154) can not be used while an HDMI cable is connected.

123

Q

Selected JPEG images can be printed on a PictBridge printer connected directly to the camera.

Connecting the Printer Connect the camera using the supplied USB cable.

1 Turn the camera off.

2 Connect the USB cable. Turn the printer on and connect the USB cable as shown. Do not use force or attempt to insert the connectors at an angle.

3 Turn the camera on. A welcome screen will be displayed in the monitor, followed by a PictBridge playback display. To print pictures one at a time, proceed to page 124. To print multiple selected pictures or all pictures, proceed to page 126.

Printing Photographs

D Selecting Photographs for Printing Movies and NEF (RAW) photographs (0 143) can not be selected for printing. If Motion Snapshots are selected, only the photographs will be printed; the movie portion will not be printed. If photographs taken with the Smart Photo Selector are selected, only the best shot will be printed.

D Panoramas Some printers may not print panoramas, while at some settings others may not print entire panoramas. See the printer manual or consult the manufacturer for details.

124

Q

Printing Pictures One at a Time

1 Display the desired picture. Press 4 or 2 to view additional pictures. Rotate the multi selector clockwise to zoom in on the current frame (0 108; rotate the multi selector counterclockwise to exit zoom). To view nine pictures at a time, rotate the selector counterclock- wise when a picture is displayed full frame. Press 1, 3, 4, or 2 to highlight pictures, or rotate the multi selector clockwise to display the highlighted picture full frame.

2 Adjust printer settings. Press J to display the following items, then press 1 or 3 to highlight an item and press 2 to view options (only options supported by the current printer are listed; to use the default option, select Use printer settings). After selecting an option, press J to return to the printer settings menu.

Option Description Page size Choose a page size.

Number of copies

This option is listed only when pictures are printed one at a time. Press 1 or 3 to choose number of copies (maximum 99).

Print border Choose whether to frame photos in white borders. Print time

stamp Choose whether to print the times and dates of record- ings on photos.

Crop

This option is listed only when pictures are printed one at a time. To exit without cropping, highlight No and press J. To crop the current picture, highlight Yes and press 2. A crop selection dialog will be displayed; rotate the multi selector clockwise to increase the size of the crop, counterclockwise to decrease. Press 1, 3, 4, or 2 to position the crop. Note that print quality may drop if small crops are printed at large sizes.

125

Q

3 Start printing. Highlight Start printing and press J to start printing. To cancel before all copies have been printed, press J again.

126

Q

Printing Multiple Pictures

1 Display the PictBridge menu. Press the G button in the PictBridge playback display (0 123).

2 Choose an option. Highlight one of the following options and press 2. Select images for printing: Select pictures for printing. Press 4

or 2 to highlight pictures and press 1 or 3 to choose the number of prints (up to 99).

Print DPOF print order: Print the current DPOF print order (0 127). The order can be viewed and modified before printing as described above under Select images for print- ing.

Index print: To create an index print of all JPEG pictures on the memory card, proceed to Step 3. Note that if the memory card contains more than 256 pictures, a confirmation dialog will be displayed and only the first 256 images will be printed. A warning will be displayed if the page size selected in Step 3 is too small.

3 Adjust printer settings. Adjust printer settings as described in Step 2 on page 124.

4 Start printing. Highlight Start printing and press J to start printing. To cancel before all copies have been printed, press J again.

A Errors See page 213 for information on what to do if an error occurs during printing.

127

Q

Creating a DPOF Print Order: Print Set The DPOF print order option is used to create digital print orders for Pict- Bridge-compatible printers and devices that support DPOF. Press the G but- ton, select DPOF print order in the play- b ack menu, and choose f rom the following options:

Select/set

Press 4 or 2 to highlight pictures (0 130). To select the current pic- ture for printing, press 1. The pic- ture will be marked with a Z icon and the number of prints will be set to 1; press 1 or 3 to specify the number of prints (up to 99; to dese- lect the picture, press 3 when the number of prints is 1). When the selection is complete, press J to display printing options. Highlight Print shooting info (print the shutter speed and aperture on all pictures in the print order) or Print date (print the date of recording on all pictures in the print order) and press 2 to select or deselect, and then press J to complete the print order.

Reset Remove all pictures from the print order.

DDPOF Print Order DPOF date and shooting info options are not supported when printing via direct USB connection; to print the date of recording on photo- graphs in the current print order, use the PictBridge Print time stamp option (0 124).

The DPOF print order option can not be used if there is not enough space on the memory card to store the print order. For restrictions on the types of images that can be selected for printing, see page 123.

Print orders may not print correctly if images are deleted using a com- puter or other device after the print order is created.

o

128

o

The Playback Menu To display the playback menu, press G and select Playback.

The playback menu contains the following options:

G button

Option Description Default 0

Delete Delete multiple images. 109

Slide show View movies and photos in a slide show.

Image type: All images Frame interval: 4 s

Movie playback time: Same as frame interval

Audio: Movie sound tracks

111

Image review Choose whether pictures are displayed after shooting.

On 131

Rotate tall Rotate tall (portrait-orientation) pictures for display during playback.

On 131

Wi-Fi upload Upload selected photos to smart devices via wireless networks.

101

DPOF print order

Create digital print orders. 127

Protect Protect pictures from accidental deletion.

131

Rating Rate pictures. 131

129

o

D-Lighting

Brighten shadows in dark or back- lit photos, creating a retouched copy that is saved separately from the unmodified original.

132

Resize Create small copies of selected pictures.

Choose size: 1280856; 1.1 M

133

Crop Create cropped copies of selected pictures.

Aspect ratio: 3 : 2 134

Face-priority zoom

Choose whether 4 and 2 can be used during playback zoom (0 108) to select faces detected with face priority.

On 135

Edit movie Create copies of movies from which unwanted footage has been trimmed.

135

Combine 4-second movies

Combine multiple 4-second movies into a single movie.

137

Combine NMS movies

Make a movie from the movie portions of multiple Motion Snapshots.

138

A Playback The camera may be unable to display or retouch images that were cre- ated or have been edited with other devices.

A Image Quality Copies created from JPEG photos are the same quality as the original (0 143). NEF (RAW) photos can not be retouched; when retouch options are used with pictures taken at an image quality of NEF (RAW) + JPEG fine, the JPEG image will be retouched and saved as a fine-qual- ity JPEG copy.

Option Description Default 0

130

o

Selecting Multiple Images Choosing the options listed below dis- plays an image selection dialog. Press 4 or 2 to highlight pictures (only pictures to which the operation applies are avail- able for selection). Delete > Delete selected images (0 109) Wi-Fi upload (0 101) DPOF print order > Select/set (0 127) Protect > Select/set (0 131) Rating (0 131) D-Lighting (0 132) Resize > Select images (0 133) Crop > Select images (0 134) Edit movie (0 135) Combine 4-second movies (0 137) Combine NMS movies (0 138)

131

o

If On is selected, pictures will be displayed immediately after shooting. To view pictures when Off is selected, press the K but- ton.

Choose whether to rotate tall (portrait-orientation) pictures for display during playback. Note that because the camera itself is already in the appropriate orientation during shooting, images are not rotated automatically during image review.

Protect selected images from accidental deletion. Note that this option does NOT protect files from deletion when the memory card is formatted (0 185).

Press 4 or 2 to highlight pictures (0 130) and press 1 or 3 to choose a rating (0 110). Press J to exit when the operation is complete.

Image Review

Rotate Tall

On

Tall (portrait-orientation) pictures are automatically rotated for display in the camera monitor. Pictures taken with Off selected for Auto image rotation (0 190) will be displayed in wide (landscape) orientation.

Off Tall (portrait-orientation) pictures are displayed in wide (landscape) orientation.

Protect

Select/set Press 4 or 2 to highlight pictures (0 130) and press 3 to select or deselect. Press J to exit when the operation is com- plete.

Reset Remove protection from all pictures.

Rating

132

o

Applied to selected images, D-Lighting creates copies that have been processed to brighten shadows.

Press 4 or 2 to highlight an image (0 130) and press J to display the options shown at right. Press 1 or 3 to choose the amount of correction per- formed (the effect can be previewed in the display) and press J to create a retouched copy.

D-Lighting

Before After

DD-Lighting Noise (randomly-spaced bright pixels, fog, or lines) may appear in cop- ies created with D-Lighting. Uneven shading may be visible with some subjects.

A Image Size Copies are the same size as the original.

133

o

Create small copies of selected photo- graphs. Select Choose size and choose a size from 1280856; 1.1 M (1280 856 pix- els), 960640; 0.6 M (960 640 pixels), and 640424; 0.3 M (640 424 pixels), and then choose Select images. Press 4 or 2 to highlight pictures (0 130) and press 3 to select or deselect. When the selection is complete, press J to display a confirma- tion dialog and select Yes to save the resized copies.

Resize

DResized Copies Playback zoom may not be available with resized copies.

134

o

Create a cropped copy of selected photographs.

The selected image will be displayed with a default crop of the selected aspect ratio shown in yellow. Use the controls below to size and position the crop and save the copy.

Crop

Select images To select an image for trimming, choose Select images, highlight a picture (0 130), and press J.

Aspect ratio Choose from aspect ratios of 3 : 2, 4 : 3, 1 : 1, and 16 : 9.

To Use Description

Decrease crop size

Rotate the multi selector counterclockwise to decrease the size of the crop.

Increase crop size

Rotate the multi selector clockwise to increase the size of the crop.

Position crop Press 1, 3, 4, or 2 to position the crop.

Create copy J Save the current crop as a separate file.

D Cropped Copies Playback zoom may not be available with cropped copies. The size of the copy varies with crop size and aspect ratio and appears at upper left in the crop display.

135

o

If On is selected, 4 and 2 can be used during playback zoom to select faces detected with face priority. If Off is selected, 4 and 2 can be used with 1 and 3 to scroll the display.

Trim footage from movies to create edited copies.

1 Choose an edit option.

2 Select a movie. Press 4 or 2 to highlight a movie (0 130) and press J to select.

Face-Priority Zoom

Edit Movie

Highlight one of the following options and press 2: Choose start point: Remove all frames

before a chosen starting frame. Start point

Choose end point: Remove all frames after a chosen closing frame.

End point

136

o

3 Pause the movie on opening or closing frame.

4 Delete the unwanted frames. Press 1 to delete all frames before (Choose start point) or after (Choose end point) the current frame.

5 Save the copy. Highlight Yes and press J to save the edited copy. If necessary, the copy can be trimmed as described above to remove additional footage.

Play the movie back, pressing J to begin and resume playback and 3 to pause (0 60; the first frame is indi- cated by a h icon in the display, the last frame by i). While playback is paused, press 4 or 2 to rewind or advance one frame at a time. Pause playback when you reach the frame that will become the new opening or closing frame.

D Trimming Movies Movies must be at least two seconds long. If a copy can not be created at the current playback position, the current position will be displayed in red in Step 4 and no copy will be created. The copy will not be saved if there is insufficient space available on the memory card.

To prevent the camera from turning off unexpectedly, use a fully- charged battery when editing movies.

137

o

Combine up to eight 4-second movies into a single movie (4-sec- ond movies are recorded using the 4-second movie option in advanced movie mode; for more information, see page 57).

1 Select movies.

2 Combine the selected movies. Press J. A confirmation dialog will be displayed; select Yes to join the selected clips and their audio tracks into a new movie, which is stored separately from its component clips.

Combine 4-Second Movies

Select 4-second movies as described on page 130. Press 3 to view or hide the order in which the clips will appear in the final movie. To preview a clip, highlight it and press 1.

138

o

Combine the movie segments of up to eight NMS-format Motion Snapshots (0 148) into a single movie.

1 Select Motion Snapshots.

2 Combine the selected Motion Snapshots. Press J. A confirmation dialog will be displayed; select Yes to join the movie portions of the selected Motion Snapshots into a new movie, which is stored separately from its compo- nent clips. Any audio included in Motion Snapshots recorded with Audio (0 77) set to Ambient will be included in the new movie.

Combine NMS Movies

Select Motion Snapshots as described on page 130. Press 3 to view or hide the order in which the clips will appear in the final movie. To preview the movie portion of the highlighted Motion Snapshot, press 1.

139

i

i

The Shooting Menu To display the shooting menu, press G and select Shooting.

The shooting menu contains the following options:

G button

Option Description Default 0

Reset shooting options

Reset shooting options to default values.

142

Creative Choose a creative mode. Creative Palette 39

Best moment capture

Choose from Active Selection, Slow view, and Smart Photo Selector.

Active Selection 63

Exposure mode

Choose how the camera sets shutter speed and aperture in Motion Snapshot mode (0 74) and when Active Selection or Slow view is chosen in best moment capture mode.

Scene auto selector 142

Image quality Choose a file format and compression ratio.

JPEG fine 143

Image size Choose a size for new photos. 5232 3488; 18.2 M

(standard photos)/ Normal panorama (panoramas)

143

Active Selection

Choose the frames Active Selection (0 63) records to temporary storage, the length of time over which the frames are captured, and the default number of frames saved.

On release, record: Preceding and following

Capture 20 frames over: 1 s

Frames saved (default): 1

146

140

i

Number of shots saved

Choose the number of shots selected by the Smart Photo Selector (0 69).

5 146

Movie before/ after

Choose when the movie portion of Motion Snapshots is recorded (0 74).

1.0 s : 0.6 s 147

File format Choose a file format for new Motion Snapshots (0 74).

NMS files 148

Audio Choose the audio recorded with Motion Snapshots (0 74).

Background music 77

Select color

Choose the hue that appears in color in pictures taken with Selective color selected in creative mode.

52

Soft

Choose amount of softening applied to pictures taken with Soft selected in creative mode. You can also choose how softening applies to pictures with portrait subjects.

Filter strength: Normal Portrait: On

148

Hue Choose base hue for pictures taken with Cross process selected in creative mode.

Blue 53

Toy camera effect

Adjust saturation and vignetting for pictures taken with Toy camera effect selected in creative mode.

Saturation: Normal Vignetting: Normal

149

Metering Choose how the camera meters exposure.

Matrix 149

Auto distortion control

Choose whether the camera corrects barrel and pin-cushion distortion.

Off 150

Option Description Default 0

141

i

Color space Choose a color space for new pictures.

sRGB 151

Active D-Lighting

Avoid loss of detail in highlights and shadows.

On 152

Long exposure NR

Reduce noise in long time- exposures.

Off 153

Optical VR Choose whether to use optical vibration reduction with compatible 1 NIKKOR lenses.

On 153

Electronic VR

Choose whether to use electronic vibration reduction in Motion Snapshot mode (0 74).

Off 154

Focus mode Choose how the camera focuses.

See page 156 155

AF-area mode Choose how the focus area is selected.

Auto-area 159

Face-priority Turn face priority on or off. On 161 Built-in AF assist

Control the built-in AF-assist illuminator.

On 161

Flash control Choose a flash mode for the built-in flash.

TTL (Manual: Full) 162

Flash compensation

Control flash output. 0.0 163

Underwater flash

Choose Enable when using an optional underwater flash unit.

Disable 163

Option Description Default 0

142

i

Select Yes to reset the options in the shooting menu and other shooting settings to default values (0 139, 205).

The options in the exposure mode menu offer varying degrees of control over shutter speed and aperture in Motion Snapshot and advanced movie modes (0 54, 57) and when Active Selec- tion or Slow view is chosen in best moment capture mode (0 63).

Reset Shooting Options

Exposure Mode

h Scene auto selector

An automatic, point-and-shoot mode in which the camera not only chooses shutter speed and aperture but adjusts other settings to suit the subject (automatic scene selection; 0 33).

P Programmed auto

The camera sets shutter speed and aperture for optimal exposure (0 41). Recommended for snapshots and in other situations in which there is little time to adjust camera settings.

S Shutter- priority auto

You choose the shutter speed; the camera selects an aperture for best results (0 42). Use to freeze or blur motion.

A Aperture- priority auto

You choose the aperture; the camera selects a shutter speed for best results (0 43). Use to blur the back- ground or bring both foreground and background into focus.

M Manual You control both shutter speed and aperture (0 44). Set shutter speed to Bulb for long time-exposures.

143

i

Choose a file format and compression ratio for photographs.

Choose the size of photographs.

Standard Photographs The following options are available in still image and Smart Photo Selector modes and when an option other than Easy pan- orama is selected in creative mode.

* Print size in inches equals image size in pixels divided by printer resolution in dots per inch (dpi; 1 inch=approximately 2.54 cm).

Image Quality

Option File type Description

NEF (RAW) NEF

Compressed 12-bit raw data from the image sensor are saved directly to the memory card. White bal- ance, contrast, and other settings can be adjusted on a computer after shooting.

JPEG fine JPEG

Record JPEG images at a compression ratio of roughly 1 : 4 (fine quality).

JPEG normal Record JPEG images at a compression ratio of roughly 1 : 8 (normal quality).

NEF (RAW) + JPEG fine

NEF/ JPEG

Two images are recorded: one NEF (RAW) image and one fine-quality JPEG image.

Image Size

Option Size (pixels) Approximate print size at 300 dpi (cm/in.) *

# 52323488; 18.2 M 5232 3488 44.3 29.5/ 17.4 11.6 $ 39202616; 10.3 M 3920 2616 33.2 22.1/ 13.1 8.7 % 26081744; 4.5 M 2608 1744 22.1 14.8/ 8.7 5.8

144

i

Panoramas The following options are available when Easy panorama is selected in creative mode.

1 Figures for horizontal and vertical panorama are reversed if camera is rotated 90 degrees.

2 Print size in inches equals image size in pixels divided by printer resolution in dots per inch (dpi; 1 inch=approximately 2.54 cm).

Option Size (pixels) 1 Approximate print size at 300 dpi (cm/in.) 2

A Normal

panorama

Camera panned horizontally: 4800 920

40.6 7.8/16.0 3.1

Camera panned vertically: 1536 4800

13.0 40.6/5.1 16.0

B Wide

panorama

Camera panned horizontally: 9600 920

81.3 7.8/32.0 3.1

Camera panned vertically: 1536 9600

13.0 81.3/5.1 32.0

145

i

ANEF (RAW)/NEF (RAW) + JPEG The option selected for image size does not affect the size of NEF (RAW) images. NEF (RAW) images can be viewed on the camera or using soft- ware such as Capture NX 2 (available separately; 0 193) or ViewNX 2 (supplied).

When photographs taken at NEF (RAW) + JPEG are viewed on the cam- era, only the JPEG image will be displayed. When photographs taken at these settings are deleted, both NEF and JPEG images will be deleted.

A File Names Photos and movies are stored as image files with names of the form xxx_nnnn.yyy, where: xxx is either NMS (Motion Snapshots recorded with NMS files

selected for File format; 0 148) or DSC (photos, MOV-format Motion Snapshots, and movies),

nnnn a four-digit number between 0001 and 9999 assigned automat- ically in ascending order by the camera, and

yyy one of the following three-letter extensions: NEF for NEF (RAW) images, JPG for JPEG images, or MOV for movies.

The NEF and JPEG files recorded at settings of NEF (RAW)+JPEG have the same file names but different extensions. Copies created with the retouch options in the playback menu have file names beginning with CSC (e.g., CSC_0001.JPG). Images recorded with Adobe RGB selected for Color space (0 151) have names that begin with an underscore (e.g., _DSC0001.JPG).

A Image Quality and Size Together, image quality and size determine how much space each pho- tograph occupies on the memory card. Larger, higher quality images can be printed at larger sizes but also require more memory, meaning that fewer such images can be stored on the memory card (0 206).

146

i

Choose the frames Active Selection (0 63) records to temporary storage, the length of time over which the frames are captured, and the default number of frames saved.

On Release, Record Choose the frames copied from the buffer to temporary storage when the shutter-release button is pressed all the way down.

Capture 20 Frames Over Choose whether the frames are captured over 1/3 s (a frame rate of 60 fps) or over 1 s (20 fps).

Frames Saved (Default) Choose the number of frames selected by default in the confir- mation dialog displayed when shooting is complete: the frame recorded to the buffer when the shutter-release button was pressed (1) or all the frames in temporary storage (All).

Choose the number of shots selected by the Smart Photo Selec- tor. If 5 is selected, the camera will save the best shot and 4 best shot candidates. If 1 is selected, the camera will save only the best shot.

Active Selection

Preceding frames

The camera captures the 20 preceding frames.

Preceding and following

The camera captures the 10 preceding frames and 10 fol- lowing frames.

Number of Shots Saved

Shutter release button fully pressed

Shutter release button fully pressed

147

i

Choose whether the movie portions of Motion Snapshots end when the shutter-release button is pressed all the way or about 0.6 s after (0 74). If 1.6 s : 0 s is selected, the photograph used for the Motion Snapshot will feature the last frame of the movie.

Movie Before/After

1.0 s : 0.6 s

Movie footage starts about a second before the shutter- release button is pressed all the way down and ends about 0.6 s after.

1.6 s : 0 s

The camera records about 1.6 s of movie footage, ending when the shutter-release button is pressed all the way down.

Shutter-release button pressed halfway

Shutter-release button pressed all the way down

1.0 s 0.6 s

Movie footage

Shutter-release button pressed halfway

Shutter-release button pressed all the way down

1.6 s

Movie footage

148

i

Choose the file format for Motion Snapshots (0 74).

Choose amount of softening applied to pictures taken with Soft selected in creative mode. You can also choose how softening applies to portrait subjects.

Filter strength Choose from High, Normal, and Low.

Portrait If On is selected and the camera detects portrait subjects (up to three), softening will be adjusted to make them stand out. If Off is selected, softening will be applied equally to the portrait sub- ject and the background.

File Format

NMS files Motion Snapshots are recorded as a 4 s MOV file and a JPEG image. Motion Snapshots can only be viewed on the cam- era or using ViewNX 2 (0 115).

MOV file

Motion Snapshots are recorded as a 10 s MOV file that can be viewed in a variety of computer applications. The Motion Snapshot is not displayed automatically when shooting ends (0 75); for information on viewing Motion Snapshot movies, see page 60.

Soft

149

i

Adjust saturation and vignetting for pictures taken with Toy camera effect selected in creative mode.

Saturation Choose from High, Normal, and Low.

Vignetting Choose the amount of vignetting from High, Normal, and Low.

Choose how the camera sets exposure.

Toy Camera Effect

Metering

L Matrix The camera meters a wide area of the frame and adjusts for contrast (tone distribution), color, composition, and subject distance, producing natural results in most situations.

M Center- weighted

The camera meters the entire frame but assigns the greatest weight to the center area. This is the classic meter for por- traits and is recommended if you are using filters with an exposure factor (filter factor) over 1.

N Spot

The camera meters the current focus area; use to meter off- center subjects (if Auto-area is selected for AF-area mode as described on page 159, the camera will meter the center focus area, while during face priority the camera will meter the focus area closest to the center of the selected face; 0 34). Spot metering ensures that the subject will be cor- rectly exposed, even when framed against a background that is much brighter or darker.

150

i

Reduce distortion caused by the optical characteristics of the lens. The options available depend on the type of lens attached. If the following options are displayed, choose a setting accord- ing to whether the camera is being used on land or under water. Note that underwater use requires a WP-N3 waterproof case (available separately).

If the following options are displayed, you can choose whether to enable auto distortion control:

Auto distortion control is available only with 1 NIKKOR lenses and not with NIKKOR lenses attached using the FT1 mount adapter (0 192, 227). Results are not guaranteed with third- party lenses. Note that when auto distortion control is enabled, the edges of photographs may be cropped out and there may be an increase in the time needed to process images before they are saved.

Auto Distortion Control

On (above water) Reduce barrel distortion in pictures taken with wide- angle lenses and pin-cushion distortion in pictures taken with long lenses.

On (underwater) Reduce pin-cushion distortion in pictures taken underwater.

Off Auto distortion control off.

On Reduce barrel distortion in pictures taken with wide- angle lenses and pin-cushion distortion in pictures taken with long lenses.

Off Auto distortion control off.

151

i

The color space determines the gamut of colors available for color reproduction. Choose sRGB for general-purpose printing and display; Adobe RGB, with its broader gamut of colors, is more suited to shots destined for professional publication and commercial printing.

Color Space

A Adobe RGB For accurate color reproduction, Adobe RGB images require applica- tions, displays, and printers that support color management.

A Color Space ViewNX 2 (supplied) and Capture NX 2 (available separately) automati- cally select the correct color space when opening photographs created with this camera. Results can not be guaranteed with third-party soft- ware.

152

i

Active D-Lighting preserves details in highlights and shadows for natural contrast. Use with high contrast scenes such as a brightly lit outdoor view framed in a door or window or a sub- jects in the shade on a sunny day. It is most effective when used with Matrix metering (0 149).

Active D-Lighting

Active D-Lighting: Off Active D-Lighting: Y On

D Active D-Lighting Noise (randomly-spaced bright pixels, fog, or lines) may appear in pho- tographs taken with Active D-Lighting. Uneven shading may be visible with some subjects.

A Active D-Lighting Versus D-Lighting The Active D-Lighting option in the shooting menu adjusts exposure before shooting to optimize the dynamic range, while the D-Lighting option in the playback menu (0 132) brightens shadows in images after shooting.

153

i

Photographs taken at slow shutter speeds are automatically pro- cessed to reduce noise (bright spots, randomly-spaced bright pixels, or fog), slightly increasing recording times. Selecting On increases the amount of noise reduction performed at shutter speeds slower than 1 s and increases the time required to record images by roughly 1.5 to 2 times. During processing, a warning will be displayed and pictures can not be taken (if the camera is turned off before processing is complete, the picture will be saved but noise reduction will not be performed). In continuous release mode, frame rates will slow and while photographs are being processed, the capacity of the memory buffer will drop.

Choose On to use optical vibration reduction with compatible 1 NIKKOR lenses.

Long Exposure NR

Optical VR

A Vibration Reduction When the camera is panned, vibration reduction applies only to motion that is not part of the pan (if the camera is panned horizontally, for example, vibration reduction will be applied only to vertical shake), making it much easier to pan the camera smoothly in a wide arc. The composition may appear to change after the shutter is released, but this does not indicate a malfunction.

AOptical VR If the lens supports both normal and active vibration reduction, select- ing On will enable active vibration, reducing both the relatively mild camera shake that occurs when the photographer is stationary and the strong camera shake associated with shooting from a moving vehicle or while walking.

154

i

Select On to enable electronic vibration reduction in Motion Snapshot mode (0 74), when filming movies in auto and cre- ative modes, and when HD movie is selected in advanced movie mode (0 57, but note that electronic VR is not available when 1080/60p or 720/60p is selected for Frame size/frame rate). This feature is available even if the attached 1 NIKKOR lens does not support vibration reduction. Note that there will be a slight delay before recording begins. The area recorded is shown by guides in the display; the appearance of the guides depends on the option selected for Electronic VR.

Electronic VR

Electronic vibration reduction on Electronic vibration reduction off

155

i

Choose how the camera focuses.

* Shutter can only be released if camera is able to focus.

Focus Mode

AF-A Auto-select AF: The camera automatically selects AF-S if the subject is stationary, AF-C if it is moving.

AF-S Single AF: For stationary subjects. Focus locks when the shutter- release button is pressed halfway. *

AF-C

Continuous AF: For subjects in motion. The camera focuses continuously on the sub- ject in the AF-area brackets while the shutter-release button is pressed half- way (note that the AF-area brackets appear only in the detailed display; 0 186). Photos can be taken whether or not the camera is in focus.

AF-area brackets

AF-F Full-time AF: For subjects in motion. The camera focuses continu- ously; photos can be taken whether or not the camera is in focus.

MF Manual focus: Focus manually (0 157). Photos can be taken whether or not the camera is in focus.

156

i

A Focus Mode The options available vary as shown below.

Menu Focus mode Shooting AF-A (default), AF-S, AF-C, MF

Movies 0 HD movie, 1 Fast motion, 2 Jump cut, 3 4-second movie

AF-F (default), AF-S, MF

y Slow motion AF-S (default), MF

AGetting Good Results with Autofocus Autofocus does not perform well under the conditions listed below. The shutter release may be disabled if the camera is unable to focus under these conditions, or the focus area may be displayed in green and the camera may sound a beep, allowing the shutter to be released even when the subject is not in focus. In these cases, focus manually (0 157) or use focus lock (0 160) to focus on another subject at the same distance, and then recompose the photograph.

There is little or no contrast between the subject and the background.

The subject contains areas of sharply contrasting brightness.

Example: The subject is the same color as the back- ground.

Examples: The subject is half in the shade; a night scene with point illu- mination.

The subject contains objects at differ- ent distances from the camera.

Background objects appear larger than the subject.

Example: The subject is inside a cage.

Example: A building is in the frame behind the subject.

The subject is dominated by regular geometric patterns.

The subject contains many fine details or is made up of objects that are small or lack variation in brightness.

Example: Blinds or a row of windows in a skyscraper.

Example: A field of flowers.

157

i

Manual Focus Manual focus can be used when autofocus does not produce the desired results.

1 Select manual focus.

2 Choose a magnification.

3 Display the manual focus guides.

A See Also See page 187 for information on controlling the beep that sounds when the camera focuses.

Highlight Manual focus in the focus mode menu (0 155) and press 2.

Highlight an option and press J. Choose from 10 zoom, 5 zoom, 2 zoom, and 1 zoom (zoom off ).

In the shooting display, press J to magnify the view at the center of the frame by the amount selected in Step 2 (this feature is not available during movie recording or in slow- motion movie mode). Manual focus guides are also displayed.

158

i

4 Focus. Rotate the multi selector until the sub- ject is in focus. Rotate the multi selec- tor clockwise to increase the focus d i s t a n c e , c o u n t e r c l o c k w i s e t o decrease; the faster you rotate the multi selector, the quicker the focus distance changes. The focus indicator shows the approximate focus dis- tance. Press J when the subject is in focus.

Press 1, 3, 4, or 2 to view areas of the frame not currently visible in the display; the visible portion is shown by the navigation window.

Focus indicator

Navigation window

AMovies The multi selector can also be used to choose the focus distance if man- ual focus is selected prior to movie recording. Rotate the multi selector clockwise to increase the focus distance, counterclockwise to decrease; the faster you rotate the multi selector, the quicker the focus distance changes.

A Focal Plane Position To determine the distance between your subject and the camera, measure from the focal plane mark on the camera body. The distance between the lens mounting flange and the focal plane is approximately 17 mm (0.7 in.).

Focal plane mark

Approx. 17 mm

159

i

Choose how the focus area for autofocus is selected.

AF-Area Mode

e Auto- area

The camera automatically detects the subject and selects the focus area.

c Single- point

Press J to view the focus area selection display, then use the multi selector to position the focus area over your subject and press J; the camera focuses on the subject in the selected focus area only. Use with stationary subjects.

Focus area

9 Subject tracking

Press J to view the focus area selection display, then use the multi selector to position the focus area over your subject and press J. The focus area will track the subject as it moves through the frame. The camera will focus on the selected subject when the shutter-release button is pressed halfway. To end focus tracking when shooting is complete, press J.

Focus area

A Subject Tracking The camera may be unable to track subjects if they move quickly, leave the frame or are obscured by other objects, change visibly in size, color, or brightness, or are too small, too large, too bright, too dark, or similar in color or brightness to the background.

160

i

Focus Lock When Single AF is selected for Focus mode (0 155), focus lock can be used to change the composition after focusing on the subject in the center of the frame, allowing you to focus on a subject that will not be in the center of the final composition. If the camera is unable to focus using autofocus (0 156), you can also focus on another subject at the same distance and then use focus lock to recompose the photograph. Focus lock is most effective when an option other than Auto-area is selected for AF-area mode (0 159).

1 Lock focus. Position the subject in the center of the frame and press the shutter- release button halfway to initiate focus. Check that the focus area is dis- played in green. Focus will remain locked while the shutter-release but- ton is pressed halfway.

2 Recompose the photograph and shoot. Focus will remain locked between shots.

Do not change the distance between the camera and the sub- ject while focus lock is in effect. If the subject moves, lift your fin- ger from the shutter-release button to end focus lock and then focus again at the new distance.

161

i

Choose On to enable face priority (0 34).

When On is selected, the built-in AF- assist illuminator will light to illuminate poorly-lit subjects if: AF-S is selected for focus mode (0 155)

or single AF is selected in AF-A, and Auto-area or Single-point is selected

for AF-area mode (0 159).

The AF-assist illuminator will not light to assist the focus opera- tion in advanced movie mode, during movie recording, or when Off is selected. If the AF-assist illuminator does not light, autofo- cus may not produce the desired results when lighting is poor.

Face-Priority

Built-in AF Assist

A The AF-Assist Illuminator Larger lenses may prevent the illuminator lighting all or part of the sub- ject. Remove lens hoods when using the illuminator.

AF-assist illuminator

162

i

Choose a flash control mode for the built-in flash.

Flash Control

1 TTL Flash output is adjusted automatically in response to shoot- ing conditions (i-TTL flash control).

2 Manual

Choose a flash level between Full and 1/32 (1/32 of full power). At full power, the built-in flash has a guide number of about 5/16 (m/ft, ISO 100, 20 C/68 F; at ISO 160, the guide number is about 6.3/20.7).

A Y icon flashes in the display during flash photography when this option is selected.

163

i

Flash compensation alters flash output from the level suggested by the camera, changing the brightness of the main sub- ject relative to the background. Choose from values between 3 EV (darker) and +1 EV (brighter) in increments of 1/3 EV; in general, positive values make the subject brighter while nega- tive values make it darker.

A Y icon is displayed when flash com- pensation is in effect. Normal flash out- put can be restored by setting flash compensation to 0. Flash compensa- tion is not reset when the camera is turned off.

Choose Enable when using an optional underwater flash unit.

Flash Compensation

Underwater Flash

(

164

(

The Movie Menu To display the movie menu, press G and select Movies.

The movie menu contains the following options:

G button

Option Description Default 0

Reset movie options

Reset movie menu options to their default values.

166

Advanced movie

Choose a movie type for advanced movie mode.

HD movie 57

Exposure mode

Choose how the camera sets exposure in advanced movie mode.

Scene auto selector 142

Slow motion Choose a frame rate for slow- motion movies recorded in advanced movie mode (0 57).

400 fps 166

Frame size/ frame rate

Choose a frame size and rate for movies recorded in auto and creative modes and when HD movie is selected in advanced movie mode (0 57).

1080/30p 167

Metering Choose how the camera meters exposure.

Matrix 149

Movie sound options

Choose sound recording options.

Microphone: Auto sensitivity (A)

Wind noise reduction: On 168

165

(

1 The camera focuses on the subject in the center of the frame when y Slow motion is selected in advanced movie mode.

2 Face detection is not available when y Slow motion is selected in advanced movie mode.

Optical VR Choose whether to use optical vibration reduction with compatible 1 NIKKOR lenses.

On 153

Electronic VR Choose whether to use electronic vibration control when recording movies.

On 154

Focus mode Choose how the camera focuses.

See page 156 155

AF-area mode Choose how the focus area is selected.

Auto-area 1 159

Face-priority Turn face priority on or off. On 2 161

Auto image capture

Choose whether the camera takes photos automatically during movie recording and select the number of pictures taken per minute.

Auto photography: Off Max. shots per minute: 4

168

Option Description Default 0

166

(

Select Yes to reset the options in the movie menu to default val- ues (0 164).

Choose a frame rate for slow-motion movies (0 57). The faster the frame rate, the smaller the frame size.

1 All figures are approximate. 2 Slow-motion movies will play back over a period of about 4 (120 fps), 13

(400 fps), or 40 (1200 fps) times the recording time.

Reset Movie Options

Slow Motion

Option Frame size (pixels) Bit rate 1 Maximum length (shooting) 1

Maximum length (playback) 1, 2

120 fps 1280 720 24 Mbps 3 seconds

12 seconds 400 fps 768 288 2 Mbps 40 seconds 1200 fps 416 144 1 Mbps 120 seconds

A See Also For information on the total length of movies that can be stored on the memory card, see page 208.

167

(

Choose a frame size and frame rate for movies recorded in auto and creative modes and when HD movie is selected in advanced movie mode (0 57).

Frame Size/Frame Rate

Option Frame size (pixels) Recording rate Bit rate

(approx.) Maximum length

t 1080/60p 1920 1080

59.94 fps 42 Mbps 10 minutes r 1080/30p 29.97 fps 24 Mbps 20 minutes u 720/60p

1280 720 59.94 fps 16 Mbps

29 minutes s 720/30p 29.97 fps 12 Mbps

A Photo Frame Size Photographs recorded by pressing the shutter-release button all the way down during movie recording have an aspect ratio of 3 : 2. The frame size varies with the option selected for Frame size/frame rate: 1080/60p and 1080/30p: 5232 3488 pixels 720/60p and 720/30p: 1472 984 pixels

A See Also For information on the total length of movies that can be stored on the memory card, see page 208.

168

(

Adjust movie sound recording settings for the built-in micro- phone.

Microphone Select Microphone off to disable sound recording. Selecting any other option enables recording and sets the microphone to the selected sensitivity.

Wind Noise Reduction Select On to enable the low-cut filter, reducing noise produced by wind blowing over the microphone (note that other sounds may also be affected).

Choose whether the camera takes photos automatically while movies are being recorded in auto or creative mode or with HD movie selected in advanced movie mode. Photos will be taken when a suitably-framed portrait subject is in focus and the com- position is stable. The maximum number of photos that can be taken during a single clip is 20, including photos taken manually (0 59).

Movie Sound Options

A The 2 Icon Movies recorded with the microphone off are indicated by a 2 icon in full-frame and movie playback.

Auto Image Capture

Auto photography The camera will take photos automatically during movie recording if On is selected.

Max. shots per minute

Choose the maximum number of shots per minute (one or four).

169

)

)

The Image Processing Menu To display the image processing menu, press G and select Image processing.

The image processing menu contains the following options:

G button

Option Description Default 0

Reset processing options

Reset image processing options to their default values.

170

White balance Adjust settings for different types of lighting.

Auto 170

ISO sensitivity Control the cameras sensitivity to light.

Auto (1606400) 175

Picture Control Choose how the camera processes pictures.

Standard 176

Custom Picture Control

Create custom Picture Controls.

180

High ISO noise reduction

Reduce noise at high ISO sensitivities.

On 182

170

)

Select Yes to reset the options in the image processing menu to default values (0 169).

White balance ensures that colors are unaffected by the color of the light source. Auto white balance is recommended for most light sources, but other values can be selected if necessary according to the type of source.

Reset Processing Options

White Balance

v Auto Automatic white balance adjustment. Recom- mended in most situations.

J Incandescent Use under incandescent lighting.

I Fluorescent Use with cool-white fluorescent lighting. H Direct sunlight Use with subjects lit by direct sunlight. N Flash Use with built-in flash.

G Cloudy Use in daylight under overcast skies. M Shade Use in daylight with subjects in the shade.

Y Underwater Choose when taking pictures underwater using an optional WP-N3 waterproof case (0 192).

L Preset manual Measure white balance (0 172).

171

)

Fine-Tuning White Balance Options other than Preset manual can be fine-tuned as follows:

1 Display fine-tuning options. Highlight an option other than Preset manual and press 2 to display the fine-tuning options shown at right.

2 Fine-tune white balance. Use the multi selector to fine-tune white balance.

3 Save changes and exit. Press J. An asterisk will appear next to the white balance icon (0 4) in the detailed display (0 186) to show that white balance has been altered from default values.

Increase green

Increase blue Increase amber

Increase magenta

AWhite Balance Fine Tuning The colors on the fine-tuning axes are relative, not absolute. For example, moving the cursor to B (blue) when a warm setting such as J (incandescent) is selected will make photographs slightly colder but will not actually make them blue.

Coordinates

Adjustment

172

)

Preset Manual Preset manual is used to record and recall custom white balance settings for shooting under mixed lighting or to compensate for light sources with a strong color cast.

1 Light a reference object. Place a neutral gray or white object under the lighting that will be used in the final photograph. A standard gray panel can be used for increased precision.

2 Select Preset manual. Highlight Preset manual in the white balance menu and press 2. The dialog shown at right will be displayed; high- light Yes and press J to overwrite the existing value for preset manual white balance.

The message shown at right will be displayed.

173

)

3 Measure white balance. When the camera is ready to measure white balance, a flashing L will be displayed. Before the indicator stops flashing, frame the reference object so that it fills the display and press the shutter-release button all the way d o w n . N o p h o t o g r a p h w i l l b e recorded; white balance can be mea- sured accurately even when the cam- era is not in focus.

4 Check the results. If the camera was able to measure a value for white balance, the message shown at right will be displayed. To return to shooting mode immediately, press the shutter-release button half- way.

If lighting is too dark or too bright, the camera may be unable to measure white balance. The message at right will be displayed. Return to Step 3 and measure white balance again.

174

)

D Auto Power Off White balance measurement will end without a new value being acquired if no operations are performed for the time selected for Auto power off in the setup menu (0 187; the default is 1 minute).

D Preset White Balance The camera can store only one value for preset white balance at a time; the existing value will be replaced when a new value is measured. Note that exposure is automatically increased by 1 EV when measuring white balance; in mode M, adjust exposure so that the exposure indica- tor shows 0 (0 44).

A Color Temperature The perceived color of a light source varies with the viewer and other conditions. Color temperature is an objective measure of the color of a light source, defined with reference to the temperature to which an object would have to be heated to radiate light in the same wave- lengths. While light sources with a color temperature in the neighbor- hood of 50005500 K appear white, light sources with a lower color temperature, such as incandescent light bulbs, appear slightly yellow or red. Light sources with a higher color temperature appear tinged with blue. The camera white balance options are adapted to the follow- ing color temperatures (all figures are approximate):

Sodium-vapor lamps: 2700 K J (incandescent)/

Warm-white fluorescent: 3000 K White fluorescent: 3700 K I (cool-white fluorescent): 4200 K Day white fluorescent: 5000 K

H (direct sunlight): 5200 K N (flash): 5400 K G (cloudy): 6000 K Daylight fluorescent: 6500 K Mercury-vapor lamps: 7200 K M (shade): 8000 K

175

)

The cameras sensitivity to light can be adjusted according to the amount of light available. The higher the ISO sensitivity, the less light needed to make an exposure, allowing faster shutter speeds or smaller apertures.

ISO Sensitivity

q

x

w

Auto (1606400) Auto (1603200) Auto (160800)

The camera adjusts ISO sensitivity in response to lighting conditions. ISO sensitivity is adjusted in the range given in brackets; choose larger ranges for increased sensitivity when lighting is poor, smaller ranges to reduce noise (randomly-spaced bright pixels, fog, or lines).

160, 200, 400, 800, 1600, 3200, 6400, 6400 (NR), 12800, 12800 (NR)

ISO sensitivity is fixed at the selected value. If 6400 (NR) or 12800 (NR) is selected, the camera will take four shots each time the shutter-release button is pressed all the way down and combine them to create a single image processed to reduce the noise that occurs at high sensitivities.

A Auto ISO Sensitivity Options When auto ISO sensitivity control is in effect, the display shows an ISO AUTO icon and the current ISO sensitivity.

D 6400 (NR)/12800 (NR) The edges of the image will be cropped out and the built-in flash and Active D-Lighting can not be used. The desired results may not be achieved if the camera or subject moves during shooting. If NEF (RAW) or NEF (RAW) + JPEG fine is selected for image quality, the picture will be recorded as a fine-quality JPEG image. Only one shot will be taken if the shutter speed is slower than 1/30 s.

176

)

Choose how the camera processes photographs.

Modifying Picture Controls Existing preset and custom Picture Controls (0 180) can be modified to suit the scene or your creative intent.

1 Display options. Highlight an item in the Picture Con- trol menu and press 2 to display Pic- ture Control settings (0 178; the settings available with custom Picture Controls are the same as the preset controls on which they are based). To use an unmodified Picture Control, highlight it and press J.

Picture Control

Q Standard Standard processing for balanced results. Recom- mended in most situations.

R Neutral Minimal processing for natural results. Choose for photographs that will later be extensively processed or retouched.

S Vivid Pictures are enhanced for a vivid, photoprint effect. Choose for photographs that emphasize primary col- ors.

T Monochrome Take monochrome photographs.

e Portrait Process portraits for natural texture and a rounded feel.

f Landscape Take vibrant photographs of landscapes and city- scapes.

177

)

2 Adjust settings. Press 1 or 3 to highlight the desired setting and press 4 or 2 to choose a value. Repeat this step until all set- tings have been adjusted, or select Quick adjust to choose a preset com- bination of settings. Default settings can be restored by pressing the O button.

3 Save changes and exit. Press J.

A Preset Picture Controls Versus Custom Picture Controls The Picture Controls supplied with the camera are referred to as preset Picture Controls. Custom Picture Controls are created through modifica- tions to existing Picture Controls using the Custom Picture Control option in the image processing menu (0 180). If desired, custom Pic- ture Controls can be saved to a memory card and copied to other Nikon 1 J4 cameras or loaded into compatible software (0 181).

AModified Picture Controls Picture Controls that have been modified from default settings are indicated by an asterisk (*) in the Picture Control menu (0 176) and in the detailed display (0 186).

178

)

Picture Control Settings

Quick adjust

Mute or exaggerate the effect of the selected Picture Control (note that this resets all manual adjustments). Not avail- able with Neutral, Monochrome, or custom Picture Controls.

Manual adjustments (all Picture

Controls)

Sharpening Manually adjust the sharpness of outlines, or select A to adjust sharpness automati- cally.

Contrast Adjust contrast manually, or select A for automatic contrast adjustment.

Brightness Adjust brightness without affecting expo- sure.

Manual adjustments

(non-monochrome only)

Saturation Control the vividness of colors. Select A to adjust saturation automatically.

Hue Adjust hue.

Manual adjustments

(monochrome only)

Filter effects

Simulate the effect of color filters on mono- chrome photographs.

Toning Choose the tint used in monochrome pho- tographs.

D A (Auto) Results for auto sharpening, contrast, and saturation vary with expo- sure and the size and position of the subject in the frame.

179

)

A Previous Settings The line under the value displayed in the Pic- ture Control setting menu indicates the pre- vious value for the setting. Use this as a reference when adjusting settings.

A Filter Effects (Monochrome Only) The options in this menu simulate the effect of color filters on mono- chrome photographs. The following filter effects are available:

Y (yellow) Enhance contrast. Can be used to reduce the brightness of the sky in landscape photographs. Orange produces more contrast than yellow, red more contrast than orange.

O (orange) R (red)

G (green) Softens skin tones. Can be used for portraits.

Note that the effects achieved with Filter effects are more pronounced than those produced by physical glass filters.

A Toning (Monochrome Only) Choose from B&W (black-and-white), Sepia, Cyanotype (blue-tinted monochrome), Red, Yellow, Green, Blue Green, Blue, Purple Blue, Red Purple. Pressing 3 when Toning is highlighted displays saturation options. Press 4 or 2 to adjust saturation. Saturation control is not available when B&W (black- and-white) is selected.

180

)

The Picture Controls supplied with the camera can be modified and saved as custom Picture Controls.

Edit/Save To create a custom Picture Control, select Edit/save and follow the steps below.

1 Select a Picture Control.

2 Edit the selected Picture Control. See page 178 for more information. To abandon any changes and start over from default settings, press the O but- ton. Press J when settings are com- plete.

Custom Picture Control

Highlight an existing Picture Control and press 2, or press J to proceed to Step 3 to save a copy of the high- lighted Picture Control without fur- ther modification.

181

)

3 Save the Picture Control. Highlight a destination (C-1 through C-9) and press J to save the custom Picture Control and return to the image processing menu.

The new Picture Control will be listed in the Picture Control menu.

Load from/Save to Card Custom Picture Controls created using the Picture Control Utility available with ViewNX 2 or optional software such as Capture NX 2 can be copied to a memory card and loaded into the camera, or custom Picture Controls created with the camera can be copied to the memory card to be used in other Nikon 1 J4 cameras and compatible software and then deleted when no longer needed.

182

)

To copy custom Picture Controls to or from the memory card, or to delete custom Picture Controls from the memory card, select Load from/save to card in the Custom Picture Control menu. The following options will be displayed:

Select On to reduce noise (randomly-spaced bright pixels, lines, or fog). If Off is selected, noise reduction will still be per- formed, but the amount is less than that performed when On is selected.

Copy to camera Copy custom Picture Controls from the memory card to custom Picture Controls C-1 through C-9.

Delete from card

Delete selected custom Picture Controls from the memory card. The confirmation dialog shown at right will be dis- played before a Picture Control is deleted; to delete the selected Picture Control, high- light Yes and press J.

Copy to card Copy a custom Picture Control (C-1 through C-9) to a selected destination (1 through 99) on the memory card.

A Copy to Card Up to 99 custom Picture Controls can be stored on the memory card at any one time. The memory card can only be used to store user-created custom Picture Controls. The preset Picture Controls supplied with the camera can not be copied to the memory card or deleted.

A Custom Picture Control > Delete The Delete option in the Custom Picture Control menu can be used to delete selected custom Picture Controls from the camera when they are no longer needed.

High ISO Noise Reduction

183

g

g

The Setup Menu To display the setup menu, press G and select Setup.

The setup menu contains the following options:

G button

Option Description Default 0

Reset setup options Reset setup menu options to default values.

185

Format memory card Format the memory card. 185

Slot empty release lock

Allow the shutter to be released when no memory card is inserted in the cam- era.

Release locked 185

Display

Adjust display brightness, view or hide a framing grid, and choose the information displayed in the monitor.

Display brightness: 0 Grid display: Off Shooting: Simple

Playback: Basic info

185

Silent photography Mute the sounds made dur- ing shooting.

Off 186

Sound settings Choose the beeps made by the camera.

AF: On Self-timer: On

Touch-screen controls: On

187

Auto power off Choose the auto power off delay.

1 min 187

Touch-screen controls

Enable or disable touch- screen controls.

Enable 187

184

g

Shutter button AE lock

Choose whether exposure locks when the shutter- release button is pressed halfway.

Off 187

HDMI device control

Choose whether remote controls for HDMI-CEC devices to which the cam- era is connected can be used to operate the cam- era.

On 122

Flicker reduction Reduce flicker or banding. 188 Reset file numbering Reset file numbering. 188 Time zone and date Set the camera clock. Daylight saving time: Off 189

Language Choose a language for the camera displays.

189

Auto image rotation Record camera orientation with pictures.

On 190

Pixel mapping Check and optimize the camera image sensor and image processors.

191

Firmware version Display the current firm- ware version.

191

Option Description Default 0

185

g

Select Yes to reset all setup menu options other than Flicker reduction, Time zone and date, and Language to default val- ues.

Select Yes to format the memory card. Note that this permanently deletes all data on the card, including protected images; before proceeding, be sure to copy important pictures and other data to a computer (0 118). To exit without formatting the memory card, highlight No and press J.

If Enable release is selected, the shutter can be released when no memory card is inserted. No pictures will be recorded, although they will be displayed in demo mode. Select Release locked to enable the shutter only when a card is inserted.

Adjust the following display options.

Display Brightness Press 1 or 3 to choose a value for moni- tor brightness. Choose higher values to brighten the display and lower values to make the display darker.

Reset Setup Options

Format Memory Card

The message shown at right is displayed while the card is formatted; do not remove the memory card or remove or disconnect the power source until formatting is com- plete.

Slot Empty Release Lock

Display

186

g

Grid Display Select On to display a framing grid (0 30).

Shooting Choose the information displayed during shooting (0 4).

Playback Choose the information displayed during playback (0 103).

Select On to mute the sounds made by the camera during shooting.

Simple Detailed

Basic info Detailed info Image only

Silent Photography

187

g

Highlight items and press 2 to select or deselect. Select AF to sound a beep when the camera focuses, Self-timer to sound a beep during self-timer photography, Touch-screen controls to sound a beep in response to use of the touch-screen controls, or remove the checks to mute these sounds. Press J to exit when settings are complete.

Choose how long the display remains on when no operations are per formed (0 23). Choose shorter delays to reduce the drain on the battery. Once the display has turned off, it can be reactivated by pressing the shutter-release button.

Enable or disable touch-screen controls.

If On is selected, exposure will lock while the shutter-release but- ton is pressed halfway.

Sound Settings

Auto Power Off

Touch-Screen Controls

Shutter Button AE Lock

188

g

Reduce flicker and banding in the display and in movies while shooting under fluorescent or mercury-vapor lighting. Choose a frequency which matches that of the local AC power supply.

When a photograph is taken or a movie is recorded, the camera names the file by adding one to the number of the previous file (0 145). If the current folder is numbered 999 and contains either 999 photographs or a photograph numbered 9999, the shutter-release button will be disabled and no further photo- graphs can be taken. To reset file numbering to 0001, select Yes for Reset file numbering and then either format the current memory card or insert a new memory card.

Flicker Reduction

A Flicker Reduction If you are unsure as to the frequency of the local power supply, test both options and choose the one that produces the best results. Flicker reduction may not produce the desired results if the subject is very bright, in which case you should select mode A or M and choose a smaller aperture (higher f-number).

Reset File Numbering

189

g

Change time zones, set the camera clock, choose the date display order, or turn daylight saving time on or off (0 25).

Choose a language for camera messages and displays.

Time Zone and Date

Time zone Choose a time zone. The camera clock is automatically set to the time in the new time zone.

Date and time Set the camera clock.

Date format Choose the order in which the day, month, and year are displayed.

Daylight saving time

Turn daylight saving time on or off. The camera clock will automatically be advanced or set back one hour. The default setting is Off.

Language

190

g

Photographs taken while On is selected contain information on camera orientation, allowing them to be rotated automatically during playback or when viewed in ViewNX 2 (supplied) or Capture NX 2 (available separately; 0 193). The following orien- tations are recorded:

Camera orientation is not recorded when Off is selected. Choose this option when panning or taking photographs with the lens pointing up or down.

Auto Image Rotation

Landscape (wide) orientation

Camera rotated 90 clockwise

Camera rotated 90 counterclockwise

D Auto Image Rotation Image orientation is not recorded for movies, Motion Snapshots, or panoramas.

ARotate Tall To automatically rotate tall (portrait-orientation) photographs for dis- play during playback, select On for the Rotate tall option in the play- back menu (0 131).

191

g

Check and optimize the camera image sensor and image proces- sors if you notice unexpected bright spots in your pictures (note that the camera comes with the sensor and processors already optimized). Before performing pixel mapping as described below, check that the battery is fully charged.

1 Attach a lens and lens cap. Turn the camera off and attach a 1 NIKKOR lens. If the lens is equipped with a cap, do not remove it.

2 Select Pixel mapping. Turn the camera on, press G, and select Pixel mapping in the setup menu.

3 Select Yes. Pixel mapping begins immediately. Note that other opera- tions can not be performed while pixel mapping is in progress. Do not turn the camera off or remove or disconnect the power source until pixel mapping is complete.

4 Turn the camera off. Turn the camera off when pixel mapping is complete.

View the current firmware version.

Pixel Mapping

Firmware Version

n

192

n

Technical Notes Read this chapter for information on compatible accessories, cleaning and storing the camera, and what to do if an error mes- sage is displayed or you encounter problems using the camera.

At the time of writing, the following accessories were available for your camera.

Optional Accessories

Lenses 1 mount lenses Mount adapters

Mount Adapter FT1: The FT1 allows NIKKOR F mount lenses to be used with Nikon 1 interchangeable lens format digital cameras. The angle of view of an F mount lens mounted on the FT1 is equivalent to that of a 35 mm format lens with a focal length about 2.7 longer. See page 227 for informa- tion on using the FT1; be sure to update to the latest version of the FT1 firmware before use. For information on attaching and removing the FT1 and on precautions for use, see the FT1 Mount Adapter Users Manual. For information on the lenses that can be used, see Compatible NIKKOR F Mount Lenses. The FT1 Mount Adapter Users Manual and Compatible NIKKOR F Mount Lenses are included with the FT1.

Power sources

Rechargeable Li-ion Battery EN-EL22 (0 1618): Additional EN-EL22 batteries are available from local retailers and Nikon-authorized service representatives.

Battery Charger MH-29 (0 16): Recharge EN-EL22 batteries. Power Connector EP-5E, AC Adapter EH-5b: These accessories can

be used to power the camera for extended periods (EH-5a and EH-5 AC adapters can also be used). An EP-5E power connector is required to connect the camera to the EH-5b, EH-5a, or EH-5; see page 195 for details.

Waterproof cases

Waterproof Case WP-N3: In addition to protecting the camera from rain, snow, and spray, this waterproof case can be used to take photographs underwater.

193

n

Underwater flash units

Underwater Speedlight SB-N10: Use with the optional WP-N3 waterproof case.

Software Capture NX 2: A complete photo editing package offering such features as white balance adjustment and color control points.

Note: Use the latest versions of Nikon software; see the web- sites listed on page xviii for the latest information on sup- ported operating systems. At default settings, Nikon Message Center 2 will periodically check for updates to Capture NX 2 and other Nikon software and firmware while you are logged in to an account on the computer and the computer is con- nected to the Internet. A message is automatically displayed when an update is found.

Body caps Body Cap BF-N1000: The body cap keeps the dust shield free of dust when a lens is not in place.

AOptional Accessories Availability may vary with country or region. See our website or bro- chures for the latest information.

194

n

Approved Memory Cards The following cards have been tested and approved for use in the camera. Cards with class 6 or faster write speeds are recom- mended for movie recording. Recording may end unexpectedly when cards with slower write speeds are used.

1 Check that any card readers or other devices with which the card will be used support 2 GB cards.

2 Check that any card readers or other devices with which the card will be used are SDHC-compliant. The camera supports UHS-I.

3 Check that any card readers or other devices with which the card will be used are SDXC-compliant. The camera supports UHS-I.

Other cards have not been tested. For more details on the above cards, please contact the manufacturer.

microSD cards microSDHC cards 2 microSDXC cards 3

SanDisk 2 GB 1 4 GB, 8 GB, 16 GB, 32 GB

64 GB Toshiba

Panasonic

195

n

Attaching a Power Connector and AC Adapter Turn the camera off before attaching an optional power connec- tor and AC adapter.

1 Ready the camera. Open the battery-chamber/mem- ory card slot and power connector covers.

2 Insert the EP-5E power connector. Be sure to insert the connector in the orientation shown, using the connec- tor to keep the orange battery latch pressed to one side. The latch locks the connector in place when the con- nector is fully inserted.

3 Close the battery-chamber/memory card slot cover. Position the power connector cable so that it passes through the power con- nector slot and close the battery- chamber/memory card slot cover.

196

n

4 Connect the AC adapter. Connect the AC adapter power cable to the AC socket on AC adapter (q) and the EP-5E power cable to the DC socket (w). A P icon is displayed in the monitor when the camera is powered by the AC adapter and power connector.

197

n

Storage If the camera will not be used for an extended period, remove the battery and store it in a cool, dry area with the terminal cover in place. To prevent mold or mildew, store the camera in a dry, well-ventilated area. Do not store your camera with naphtha or camphor moth balls or in locations that: are poorly ventilated or subject to humidities of over 60% are next to equipment that produces strong electromagnetic

fields, such as televisions or radios are exposed to temperatures above +50 C (122 F) or below 10 C

(14 F)

Cleaning

Do not use alcohol, thinner, or other volatile chemicals.

Storage and Cleaning

Camera body

Use a blower to remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or sea- side, wipe off sand or salt with a cloth lightly dampened in distilled water and dry thoroughly. Important: Dust or other foreign matter inside the camera may cause damage not cov- ered under warranty.

Lens

Lenses are easily damaged. Remove dust and lint with a blower. If using an aerosol blower, keep the can vertical to prevent the discharge of liquid. To remove fingerprints and other stains, apply a small amount of lens cleaner to a soft cloth and clean with care.

Monitor

Remove dust and lint with a blower. When removing finger- prints and other stains, wipe the surface lightly with a soft cloth or chamois leather. Do not apply pressure, as this could result in damage or malfunction.

Dust shield The dust shield is easily damaged. Remove dust and lint with a blower.

198

n

Do not drop: The product may malfunction if subjected to strong shocks or vibration.

Keep dry : This product is not waterproof, and may malfunction if immersed in water or exposed to high levels of humidity. Rusting of the internal mechanism can cause irreparable damage.

Avoid sudden changes in temperature: Sudden changes in temperature, such as those that occur when entering or leaving a heated building on a cold day, can cause condensation inside the device. To prevent condensation, place the device in a carrying case or plastic bag before exposing it to sudden changes in temperature.

Keep away from strong magnetic fields: Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the display, damage data stored on the memory card, or affect the products internal circuitry.

Keep the lens mount covered: Be sure to attach the body cap if the camera is without a lens.

Do not touch the dust shield: The dust shield covering the image sensor is easily damaged. Under no circumstances should you exert pressure on the shield or poke it with cleaning tools. These actions could scratch or otherwise damage the shield.

Turn the product off before removing or disconnecting the power source: Do not unplug the product or remove the battery while the product is on or while images are being recorded or deleted. Forcibly cutting power in these circumstances could result in loss of data or in damage to product memory or internal circuitry. To prevent an accidental interruption of power, avoid carrying the product from one location to another while the AC adapter is connected.

Caring for the Camera and Battery: Cautions

199

n

Cleaning: When cleaning the camera body, use a blower to gently remove dust and lint, then wipe gently with a soft, dry cloth. After using the cam- era at the beach or seaside, wipe off any sand or salt using a cloth lightly dampened in pure water and then dry the camera thoroughly.

Lenses are easily damaged. Dust and lint should be gently removed with a blower. When using an aerosol blower, keep the can vertical to prevent discharge of liquid. To remove fingerprints and other stains from the lens, apply a small amount of lens cleaner to a clean, soft cloth and wipe the lens carefully.

Storage: To prevent mold or mildew, store the camera in a cool, dry, well- ventilated area. If you are using an AC adapter, unplug the adapter to prevent fire. If the product will not be used for an extended period, remove the battery to prevent leakage and store the camera in a plastic bag containing a desiccant. Do not, however, store the camera case in a plastic bag, as this may cause the material to deteriorate. Note that des- iccant gradually loses its capacity to absorb moisture and should be replaced at regular intervals.

To prevent mold or mildew, take the camera out of storage at least once a month. Turn the camera on and release the shutter a few times before putting it away.

Store the battery in a cool, dry place. Replace the terminal cover before putting the battery away.

Notes on the monitor: The monitor is constructed with extremely high pre- cision; at least 99.99% of pixels are effective, with no more than 0.01% being missing or defective. Hence while these displays may contain pix- els that are always lit (white, red, blue, or green) or always off (black), this is not a malfunction and has no effect on images recorded with the device.

Images in the monitor may be difficult to see in a bright light.

Do not apply pressure to the display, as this could cause damage or mal- function. Dust or lint on the display can be removed with a blower. Stains can be removed by wiping lightly with a soft cloth or chamois leather. Should the monitor break, care should be taken to avoid injury from bro- ken glass and to prevent liquid crystal from the display touching the skin or entering the eyes and mouth.

200

n

Do not leave the lens pointed at the sun: Do not leave the lens pointed at the sun or other strong light source for an extended period. Intense light may cause the image sensor to deteriorate or produce a white blur effect in photographs.

Moir: Moir is an interference pattern created by the interaction of an image containing a regular, repeating grid, such as the pattern of weave in cloth or windows in a building, with the camera image sensor grid. In some cases, it may appear in the form of lines. If you notice moir in your photographs, try changing the distance to the subject, zooming in and out, or changing the angle between the subject and the camera.

Lines: Noise in the form of lines may in rare cases appear in pictures of extremely bright or backlit subjects.

Batteries: Batteries may leak or explode if improperly handled. Observe the following precautions when handling batteries: Use only batteries approved for use in this equipment. Do not expose the battery to flame or excessive heat. Keep the battery terminals clean. Turn the product off before replacing the battery. Remove the battery from the camera or charger when not in use and

replace the terminal cover. These devices draw minute amounts of charge even when off and could draw the battery down to the point that it will no longer function. If the battery will not be used for some time, insert it in the camera and run it flat before removing it and stor- ing it in a location with an ambient temperature of 15 C to 25 C (59 F to 77 F; avoid hot or extremely cold locations). Repeat this process at least once every six months.

Turning the camera on and off repeatedly when the battery is fully dis- charged will shorten battery life. Batteries that have been fully dis- charged must be charged before use.

The internal temperature of the battery may rise while the battery is in use. Attempting to charge the battery while the internal temperature is elevated will impair battery performance, and the battery may not charge or charge only partially. Wait for the battery to cool before charging.

Continuing to charge the battery after it is fully charged can impair bat- tery performance.

201

n

A marked drop in the time a fully charged battery retains its charge when used at room temperature indicates that it requires replacement. Purchase a new EN-EL22 battery.

Charge the battery before use. When taking photographs on important occasions, ready a spare EN-EL22 battery and keep it fully charged. Depending on your location, it may be difficult to purchase replace- ment batteries on short notice. Note that on cold days, the capacity of batteries tends to decrease. Be sure the battery is fully charged before taking photographs outside in cold weather. Keep a spare battery in a warm place and exchange the two as necessary. Once warmed, a cold battery may recover some of its charge.

Used batteries are a valuable resource; recycle in accord with local reg- ulations.

D Servicing the Camera and Accessories The camera is a precision device and requires regular servicing. Nikon recommends that the camera be inspected by the original retailer or Nikon-authorized service representative once every one to two years, and that it be serviced once every three to five years (note that fees apply to these services). Frequent inspection and servicing are particu- larly recommended if the camera is used professionally. Any accesso- ries regularly used with the camera, such as lenses, should be included when the camera is inspected or serviced.

202

n

The following table lists the settings that can be adjusted in each mode.

C Auto, u Best Moment Capture, v Advanced Movie, and z Motion Snapshot Modes

Available Settings

C u v z

s t y h P, S, A M h P, S, A M

Shooting, m ovie, and im

age processing m enus

Image quality 1 Image size 2 1 Metering 3 3 4 4 Auto distortion control

1

Color space 1 Active D-Lighting 3 3 Long exposure NR 5 Focus mode 3 3 AF-area mode 3 3 4 4 Face-priority 3 3 4 4 Flash compensation Underwater flash 5 White balance 3 3 ISO sensitivity 3 3 Picture Control 3 3 Custom Picture Control

3 3

High ISO noise reduction

203

n

1 Has no effect on movies recorded with movie-record button. 2 RAW images fixed at 5232 3488 pixels. 3 Available when P, S, A, or M is selected for Exposure mode. 4 Not available when y Slow motion is selected in advanced movie mode

(0 57). 5 Not available when 10, 20, 30, or 60 fps is selected in continuous mode

(0 79). 6 Continuous and self-timer can not be used together. 7 Available when h, P, S, or A is selected for Exposure mode.

O ther

settings

Continuous 6 Self-timer 6 Exposure compensation

7 7

Flash mode 5

C u v z

s t y h P, S, A M h P, S, A M

204

n

w Creative Mode In the table below, creative modes are represented by the following icons: 4 creative palette, 5 HDR, p easy panorama, q soft, r miniature effect, s selective color, 6 cross process, and 7 toy camera effect.

1 Has no effect on movies recorded with movie-record button. 2 NEF (RAW) and NEF (RAW) + JPEG fine not available. 3 RAW images fixed at 5232 3488 pixels. 4 Not available when 10, 20, 30, or 60 fps is selected in continuous mode

(0 79). 5 Not available at an ISO sensitivity of 6400 (NR) or 12800 (NR). 6 Continuous and self-timer can not be used together.

P, S, A M 4 5 p q, r, s, 6, 7

Shooting, m ovie, and

im age p

rocessing m enus

Image quality 1 1 1,2 1,2 1,2 1,2

Image size 1,3 1,3 1 1 1 1

Metering 1 1 Auto distortion control 1 1 1 1 1

Color space 1 1 1 1 1

Active D-Lighting 1 1 Long exposure NR 4 4 Focus mode 1 1 AF-area mode 1 1 Face-priority Flash compensation 4,5 4,5 5

Underwater flash 4,5 4,5 5

White balance ISO sensitivity 1 1 Picture Control Custom Picture Control High ISO noise reduction

O ther

settings

Continuous 6 Self-timer 6 Exposure compensation Flash mode 4 4

205

n

Defaults for the options in the playback, shooting, movie, image processing, and setup menus may be found on pages 128, 139, 164, 169, and 183, respectively. Defaults for other settings are listed below.

* Not displayed when Auto-area is selected for AF-area mode.

Defaults

Option Default Focus area (0 159) Center *

Flexible program (0 41) Off Focus lock (0 160) Off Continuous/self-timer (0 79, 81) 8 (single frame) Exposure compensation (0 83) 0.0 Flash mode (0 85, 87) Auto, Soft, Miniature effect,

Selective color, Cross process, Toy camera effect: Auto

P Programmed auto, S Shutter-priority auto, A Aperture-priority auto, M Manual:

Fill flash Picture Control settings (0 176) Unmodified

206

n

The following table shows the number of pictures or amount of movie footage that can be stored on a 16GB SanDisk SDSDQXP- 016G-J35 UHS-I microSDHC card at different image quality, size, or movie settings. All figures are approximate; file size varies with the type of card and scene recorded.

Auto, Creative (Easy Panorama Excluded), Active Selection, Slow View, and Smart Photo Selector 1

1 Number of shots saved set to 1. 2 Image size applies to JPEG images only. Size of NEF (RAW) images can not

be changed. File size is the total for NEF (RAW) and JPEG images.

Memory Card Capacity

Image quality (0 143) Image size (0 143) File size No. of images

NEF (RAW) + JPEG fine 2

5232 3488 35.3 MB 430 3920 2616 30.7 MB 494 2608 1744 27.5 MB 552

NEF (RAW) 24.3 MB 625

JPEG fine 5232 3488 11.0 MB 1300 3920 2616 6.5 MB 2300 2608 1744 3.2 MB 4700

JPEG normal 5232 3488 5.8 MB 2600 3920 2616 3.5 MB 4300 2608 1744 1.9 MB 7900

207

n

Easy Panorama

Smart Photo Selector 1

1 Number of shots saved set to 5. File size is total for 5 images. 2 Image size applies to JPEG images only. Size of NEF (RAW) images can not

be changed. File size is the total for NEF (RAW) and JPEG images.

Image quality (0 143)

Image size (0 143)

File size No. of images

JPEG fine

Normal panorama

4800 920 4.4 MB 3400 1536 4800 4.4 MB 3400

Wide panorama

9600 920 8.6 MB 1700 1536 9600 8.6 MB 1700

JPEG normal

Normal panorama

4800 920 2.3 MB 6500 1536 4800 2.3 MB 6500

Wide panorama

9600 920 4.4 MB 3400 1536 9600 4.4 MB 3400

Image quality (0 143) Image size (0 143) File size No. of shots

NEF (RAW) + JPEG fine 2

5232 3488 176.5 MB 86 3920 2616 153.6 MB 98 2608 1744 137.3 MB 110

NEF (RAW) 121.4 MB 125

JPEG fine 5232 3488 55.1 MB 275 3920 2616 32.3 MB 469 2608 1744 15.9 MB 952

JPEG normal 5232 3488 29.0 MB 522 3920 2616 17.6 MB 860 2608 1744 9.4 MB 1500

208

n

HD, Fast-Motion, Jump-Cut, and 4-Second Movies

1 HD movies only. Fast-motion, jump-cut, and 4-second movies are recorded at 1080/30p.

2 For information on the maximum length that can be recorded in a single clip, see page 167.

Slow-Motion Movies

* Up to 3 s of slow-motion footage can be recorded in a single clip. Playback length is about 4 (120 fps) or 13 (400 fps) or 40 (1200 fps) times the recorded length.

Motion Snapshots

* File size is the total for a single photograph and movie.

Frame size/frame rate (0 167) 1 Maximum total length (approx.) 2

1080/60p 47 minutes 1080/30p 1 hour 20 minutes 720/60p 1 hour 57 minutes 720/30p 2 hours 32 minutes

Frame rate (0 166) Maximum total recorded length (approx.) *

120 fps 26 minutes 400 fps 31 minutes

1200 fps 31 minutes

Image quality Image size Format (0 148) File size No. of shots NMS 23.6 MB * 641 MOV 32.5 MB 467

209

n

If the camera fails to function as expected, check this list of com- mon problems before consulting your retailer or Nikon repre- sentative.

Battery/Display

Shooting (All Modes)

Troubleshooting

The camera is on but does not respond: Wait for recording or any other process- ing to end. If the problem persists, turn the camera off. If the camera still does not respond, remove and replace the battery or disconnect and reconnect the AC adapter, but note that this will delete any data not yet saved. Data already saved to the memory card are unaffected. The display is off: The camera is off (0 23) or the battery is exhausted (0 16, 27). The display has turned off automatically to save power (0 187). The

display can be reactivated by pressing the shutter-release button. The camera is connected to a computer (0 118) or television (0 121). The camera turns off without warning: The battery is low (0 16, 27). The display has turned off automatically to save power (0 187). The

display can be reactivated by pressing the shutter-release button. The cameras internal temperature is high (0 xvii, 215). Wait for the

camera to cool before turning it on again. Indicators are not displayed: Use the Display > Shooting and Display > Playback options in the setup menu to choose the information dis- played (0 185).

The camera takes time to turn on: Delete files or format the memory card. The shutter-release is disabled: The battery is exhausted (0 16, 27). The memory card is full (0 27). The flash is charging (0 88). The camera is not in focus (0 29). You are currently filming a slow-motion movie (0 59).

210

n

Only one picture is taken each time the shutter-release button is pressed in continuous release mode: I is selected in continuous mode (0 79) and the built-in flash is raised. The camera does not focus automatically: The subject is not suited to autofocus (0 156). The camera is in manual focus mode (0 155, 157). Focus does not lock when the shutter-release button is pressed halfway: Set the focus mode to AF-S (0 155, 160). Focus area selection is unavailable: Focus area selection is not available in auto-area AF (0 159) or face priority (0 34). In other AF-area modes, the focus area can be selected by pressing J. AF-area mode selection is unavailable: The camera is in auto or best moment capture mode (0 63), an option other than P, S, A, M is selected in creative mode (0 39), manual focus mode is selected (0 155), or the h Scene auto selector is used (0 142). Image size selection is unavailable: NEF (RAW) is selected for image quality (0 143). The camera is slow to record photos: Turn long exposure noise reduction off (0 153) and choose an option for ISO sensitivity (0 175) other than 6400 (NR) and 12800 (NR). In creative mode, additional time may be needed to record photos when HDR or Easy panorama is selected (0 48, 49). Noise (bright spots, randomly-spaced bright pixels, fog, or lines) appears in photos: Lower ISO sensitivity or enable high ISO noise reduction (0 175). Use long exposure noise reduction at shutter speeds slower than 1 s

(0 153). Smudges appear in photographs: Clean the front and rear lens elements or the dust shield (0 197). Flicker or banding appears in movies or in the display: Choose a Flicker reduc- tion setting that matches the local AC power supply (0 188). No flash: See page 89. The flash will not fire when off (0 85, 87); in P, S, A, and M modes, the flash will not fire when lowered. Menu items are unavailable: Some options are only available in particular shooting or exposure modes (0 202).

211

n

Shooting (P, S, A, and M Modes)

Movies

Tap Shooting Options

The shutter release is disabled: You selected mode S after choosing a shutter speed of Bulb in mode M (0 42). Choose a different shutter speed. Some shutter speeds are not available: You are using the flash. Colors are unnatural: Adjust white balance to match the light source (0 170). Adjust Picture Control settings (0 176). Cannot measure white balance: The subject is too dark or too bright (0 173). Picture Controls produce varying results: A (auto) is selected for sharpening, contrast, or saturation. For consistent results over a series of photos, choose another setting (0 178). Noise (reddish areas and other artifacts) appears in long time-exposures: Enable long exposure noise reduction (0 153).

Cannot record movies: The movie-record button can not be used to record movies in best moment capture or Motion Snapshot mode (0 66, 77). No sound is recorded for movies: Microphone off is selected for Movie sound options > Microphone

(0 168). Live audio is not recorded with slow-motion, fast-motion, or jump-cut

movies (0 57) or with Motion Snapshots recorded with None selected for Audio (0 77).

The touch screen can not be used for shooting or focus: Touch shooting options are not available in best moment capture or

Motion Snapshot mode. The edges of the display can not be used for shooting or focus. Tap

closer to the center of the display. Pictures are blurred: The camera may move when the display is tapped, which may under some conditions result in blurred pictures. Use both hands to hold the camera steady.

212

n

Playback

Wi-Fi (Wireless Networks)

Miscellaneous

NEF (RAW) images are not displayed: The camera displays only the JPEG copies of NEF (RAW) + JPEG fine images (0 145). Tall (portrait) orientation photos are displayed in wide (landscape) orientation: Select On for Rotate tall (0 131). The photos were taken with Auto image rotation off (0 190). Camera was pointed up or down when the photo was taken (0 190). Photo is displayed in image review (0 131). Cannot hear movie sound: Rotate the multi selector clockwise to raise the volume (0 60). If the

camera is connected to a television (0 121), use the controls for the TV to adjust the volume.

Live audio is not recorded with slow-motion, fast-motion, or jump-cut movies (0 57) or with Motion Snapshots recorded with None selected for Audio (0 77).

Cannot delete images: Remove protection from the files before deletion (0 131). Cannot select photos for printing: The memory card is full (0 27) or the pho- tos are in NEF (RAW) format. To print NEF (RAW) photos, transfer the pic- tures to a computer and use the supplied software or Capture NX 2 (0 118). Pictures are not displayed on TV: The camera is not correctly connected (0 121). Pictures cannot be transferred to a computer: If your system does not meet the requirements on page 116, you may still be able to transfer pictures to the computer using a card reader. Photos are not displayed in Capture NX 2: Update to the latest version (0 193).

Smart devices do not display the camera SSID (network name): Confirm that camera Wi-Fi is enabled (0 94). Try turning the smart device Wi-Fi off and then on again.

The date of recording is not correct: Set the camera clock (0 25, 189). Menu items are unavailable: Some options are only available at particular settings (0 202) or when a memory card is inserted (0 18).

213

n

This section lists the error messages that appear in the display.

Error Messages

Message Solution 0

(Shutter-speed or aperture display flashes)

If the subject is too bright, lower ISO sensitivity or choose a faster shutter speed or smaller aperture (higher f-number).

42, 43, 44, 175

If the subject is too dark, raise ISO sen- sitivity, use the flash, or choose a slower shutter speed or larger aperture (lower f-number).

42, 43, 44, 84,

175

Keeping the zoom ring button pressed, rotate the zoom ring to extend the lens.

A lens with a retractable lens barrel button is attached with the lens barrel retracted. Keeping the retractable lens barrel button pressed, rotate the zoom ring to extend the lens.

22, 224

Check lens. Pictures can only be taken when a lens is attached.

Attach a lens. 21

Cannot take pictures. Insert fully-charged battery.

Turn the camera off and recharge the battery or insert a fully charged spare battery.

16, 18

Start-up error. Turn the camera off and then on again.

Turn the camera off, remove and replace the battery, and then turn the camera on.

18, 23

The clock has been reset.

Set the camera clock. 25, 189

No memory card. Turn the camera off and confirm that the card is correctly inserted.

18

214

n

This memory card cannot be used. Card may be damaged; insert a different card.

Use an approved card. 194 Format the card. If the problem per-

sists, the card may be damaged. Con- tact a Nikon-authorized service representative.

185

Insert a new memory card. 18, 194 This memory card is not formatted. Format the memory card?

Select Yes to format the card, or turn the camera off and insert another memory card.

18, 185

Memory card is full.

You may be able to record additional images if you reduce image quality or size.

143

Delete unwanted images. 109 Insert another memory card. 18, 194

Cannot create additional folders on memory card.

If the current folder is numbered 999 and contains either 999 photographs or a photograph numbered 9999, the shut- ter-release button will be disabled and no further photographs can be taken. Choose Yes for Reset file numbering and then either format the current mem- ory card or insert a new memory card.

188

The movie-record button cannot be used in this mode.

The movie-record button can not be used in best moment capture or Motion Snapshot modes.

66, 77

Photographs cannot be recorded in this mode.

The shutter-release button can not be used to take photographs while a slow-motion movie is being recorded.

59

Photographs cannot be taken in shutter- priority auto mode at a shutter speed of Bulb.

Choose a different shutter speed, or select mode M.

42, 44

Message Solution 0

215

n

* See the printer manual for more information.

Cannot shoot panorama with lens of this focal length.

Use a lens with a focal length of 6 to 30 mm to shoot panoramas. If you are using a zoom lens, choose a focal length between 6 and 30 mm.

49

Failed to update lens firmware. Try again after turning the camera off and on.

Turn the camera off and then on again and reattempt the update. If the prob- lem persists or reoccurs frequently, contact a Nikon-authorized service representative.

An error has occurred in the internal circuitry. Try again after turning the camera off and on.

Turn the camera off and then on again. If the problem persists or reoccurs fre- quently, contact a Nikon-authorized service representative.

The cameras internal temperature is high. The camera will now turn off.

Wait for the camera to cool. xvii

Memory card contains no images.

To view pictures, insert a memory card containing images.

18

Cannot display this file. The file has been created or modified on a computer or different make of camera, or is corrupt.

Check printer. Check the printer. *

Check paper. Select Resume after loading paper of the correct size.

*

Paper jam. Clear the jam and select Resume. *

Out of paper. Insert paper and select Resume. *

Check ink supply. Select Resume after checking the ink. *

Out of ink. Replace the ink and select Resume. *

Message Solution 0

216

n

Nikon 1 J4 Digital Camera

Specifications

Type Type Digital camera with support for interchangeable

lenses Lens mount Nikon 1 mount Effective angle of view Approx. 2.7 lens focal length (35 mm format

equivalent)

Effective pixels 18.4 million

Image sensor Image sensor 13.2 mm 8.8 mm CMOS sensor (Nikon CX for-

mat)

Storage Image size (pixels) Still images taken in auto, best moment capture, and all

creative modes other than easy panorama (aspect ratio 3 : 2) 5232 3488 3920 2616 2608 1744

Still images taken in normal panorama mode with camera panned horizontally (aspect ratio 120 : 23)

4800 920 Still images taken in normal panorama mode with camera panned vertically (aspect ratio 8 : 25)

1536 4800 Still images taken in wide panorama mode with camera panned horizontally (aspect ratio 240 : 23)

9600 920 Still images taken in wide panorama mode with camera panned vertically (aspect ratio 4 : 25)

1536 9600 Still images taken during movie recording (aspect ratio 3 : 2)

5232 3488 (1080/60p, 1080/30p) 1472 984 (720/60p, 720/30p)

Motion Snapshots (photo portion, aspect ratio 16 : 9) 5232 2936

217

n

File format NEF (RAW): 12-bit, compressed JPEG: JPEG-Baseline compliant with fine (approx.

1 : 4), normal (approx. 1 : 8) compression NEF (RAW) + JPEG: Single photograph recorded in

both NEF (RAW) and JPEG formats Picture Control system Standard, Neutral, Vivid, Monochrome, Portrait,

Landscape; selected Picture Control can be mod- ified; storage for custom Picture Controls

Media microSD (micro Secure Digital), microSDHC, and microSDXC memory cards

File system DCF 2.0, DPOF, Exif 2.3, PictBridge

Shooting modes C auto; w creative, with a choice of the follow- ing options: P, S, A, M, 4 creative palette, 5 HDR, p easy panorama, q soft, r miniature effect, s selective color, 6 cross process, and 7 toy cam- era effect; u best moment capture (s Active Selection, t slow view and y Smart Photo Selector); v advanced movie (0 HD movie, y slow motion, 2 jump cut, 1 fast motion and 3 4-second movie), z Motion Snapshot

Shutter Type Electronic shutter Speed 1/16,00030 s in steps of 1/3 EV; Bulb

Note: Bulb ends automatically after approximately 2 minutes Flash sync speed Synchronizes with shutter at X= 1/60 s or slower

Release Mode Single frame, continuous

Self-timer Frame advance rate Approx. 5, 10, 20, 30, or 60 fps Self-timer 2 s, 10 s

218

n

Exposure Metering TTL metering using image sensor Metering method Matrix

Center-weighted: Meters 4.5 mm circle in center of frame

Spot: Meters 2 mm circle centered on selected focus area

Mode P programmed auto with flexible program; S shutter-priority auto; A aperture-priority auto; M manual; h scene auto selector

Exposure compensation 3+3 EV in increments of 1/3 EV Exposure lock Luminosity locked at metered value when shut-

ter-release button is pressed halfway ISO sensitivity (Recommended Exposure Index)

ISO 160; ISO 20012800 in steps of 1 EV; 6400 (NR); 12800 (NR); auto ISO sensitivity control (ISO 1606400, 1603200, 160800) available (user controlled in P, S, A, and M modes)

Active D-Lighting On, off

Focus Autofocus Hybrid autofocus (phase-detection/contrast-

detect AF); AF-assist illuminator Lens servo Autofocus (AF): Single AF (AF-S); continuous AF

(AF-C); auto AF-S/AF-C selection (AF-A); full- time AF (AF-F)

Manual focus (MF) AF-area mode Single-point, auto-area, subject tracking Focus area Single-point AF: 171 focus areas; the center 105

areas support phase-detection AF Auto-area AF: 41 focus areas

Focus lock Focus can be locked by pressing shutter-release button halfway (single AF)

Face priority On, off

219

n

Flash Built-in flash Auto; Soft, Miniature effect, Selective color, Cross pro-

cess, Toy camera effect (Creative mode): Flash pops up automatically and fires as required

P programmed auto, S shutter-priority auto, A aperture- priority auto, M manual (Creative mode): Manual pop- up

Guide Number (GN) Approx. 5/16 (m/ft, ISO 100, 20 C/68 F; at ISO 160, Guide Number is approx. 6.3/20.7)

Control i-TTL flash control using image sensor Mode Auto, auto + red-eye reduction, fill flash, fill flash

+ slow sync, red-eye reduction, red-eye reduction + slow sync, rear-curtain sync, rear curtain + slow sync, off

Flash compensation 3+1 EV in increments of 1/3 EV Flash-ready indicator Lights when built-in flash unit is fully charged

White balance Auto, incandescent, fluorescent, direct sunlight, flash, cloudy, shade, underwater, preset manual, all except preset manual with fine tuning

220

n

Movie Metering TTL metering using image sensor Metering method Matrix

Center-weighted: Meters 4.5 mm circle in center of frame

Spot: Meters 2 mm circle centered on selected focus area

Frame size (pixels)/ recording rate

HD movies (aspect ratio 16 : 9) 1920 1080/60p (59.94 fps) 1920 1080/30p (29.97 fps) 1280 720/60p (59.94 fps) 1280 720/30p (29.97 fps)

Slow-motion movies 1280 720/120 fps

(aspect ratio 16 : 9; plays at 30p/29.97 fps) 768 288/400 fps

(aspect ratio 8 : 3; plays at 30p/29.97 fps) 416 144/1200 fps

(aspect ratio 26 : 9; plays at 30p/29.97 fps) Fast-motion, jump-cut, and 4-second movies (aspect ratio 16 : 9)

1920 1080/30p (29.97 fps) Motion Snapshots (movie portion, aspect ratio 16 : 9)

1920 1080/60p (59.94 fps) (plays at 24p/23.976 fps) File format MOV Video compression H.264/MPEG-4 Advanced Video Coding Audio recording format PCM Audio recording device Built-in stereo microphone; sensitivity adjustable

Monitor 7.5 cm (3-in.), approx. 1037k-dot, TFT LCD touch screen with brightness adjustment

Playback Full-frame and thumbnail (4, 9, or 16 images or calendar) playback with playback zoom, movie and panorama playback, slide show, histogram display, auto image rotation, and rating option

Interface USB Hi-Speed USB HDMI output Type D HDMI connector

221

n

Wireless Standards IEEE 802.11b, IEEE 802.11g Communications protocols

IEEE 802.11b: DSSS/CCK IEEE 802.11g: OFDM

Operating frequency 24122462 MHz (channels 111) Range (line of sight) Approximately 10 m/33 ft (assumes no interfer-

ence; range may vary with signal strength and presence or absence of obstacles)

Data rate 54 Mbps Maximum logical data rates according to IEEE standard. Actual rates may differ.

Security Authentication: Open system, WPA2-PSK Encryption: AES

Wireless setup Supports WPS Access protocols Infrastructure

Supported languages Arabic, Bengali, Bulgarian, Chinese (Simplified and Traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hindi, Hungar- ian, Indonesian, Italian, Japanese, Korean, Mar- athi, Norwegian, Persian, Polish, Portuguese (European and Brazilian), Romanian, Russian, Ser- bian, Spanish, Swedish, Tamil, Telugu, Thai, Turk- ish, Ukrainian, Vietnamese

Power source Battery One rechargeable Li-ion EN-EL22 battery AC adapter EH-5b AC adapter; requires EP-5E power connec-

tor (available separately)

Tripod socket 1/4-in. (ISO 1222)

Dimensions/weight Dimensions (W H D) Approx. 99.5 60.0 28.5 mm (3.9 2.4 1.1 in.),

excluding projections Weight Approx. 232 g (8.2 oz) with battery and memory

card but without body cap; approx. 192 g (6.8 oz), camera body only

Operating environment Temperature 0 C40 C (+32 F104 F) Humidity 85% or less (no condensation)

222

n

Unless otherwise stated, all figures are for a camera with a fully-charged bat- tery operating at the temperature specified by the Camera and Imaging Products Association (CIPA): 23 3 C (73.4 5.4 F).

Nikon reserves the right to change the specifications of the hardware and software described in this manual at any time and without prior notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain.

MH-29 battery charger Rated input AC 100240 V, 5060 Hz, 0.2 A Rated output DC 8.4 V/0.6 A Supported batteries Nikon EN-EL22 rechargeable Li-ion batteries Charging time Approx. 3 hours at an ambient temperature of

25 C (77 F) when no charge remains Operating temperature 0 C40 C (+32 F104 F) Dimensions (W H D) Approx. 67.0 28.0 94.0 mm (2.6 1.1 3.7 in.),

excluding plug adapter Weight Approx. 83 g (2.9 oz), excluding plug adapter

EN-EL22 rechargeable Li-ion battery Type Rechargeable lithium-ion battery Rated capacity 7.2 V, 1010 mAh Operating temperature 0 C40 C (+32 F104 F) Dimensions (W H D) Approx. 30.7 50.0 13.0 mm (1.2 2.0 0.5 in.) Weight Approx. 39 g (1.4 oz), excluding terminal cover

223

n

Specifications subject to change without notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain.

1 NIKKOR VR 1030mm f/3.55.6 PD-ZOOM Type 1 mount lens Focal length 1030 mm Maximum aperture f/3.55.6 Construction 9 elements in 7 groups (including 4 aspherical lens ele-

ments, 1 ED lens element, and HRI lens elements) Angle of view 7729 40 Vibration reduction Lens shift using voice coil motors (VCMs) Minimum focus distance 0.2 m (0.7 ft) from focal plane at all zoom positions Diaphragm blades 7 (rounded diaphragm opening) Diaphragm Fully automatic Aperture range 10 mm focal length: f/3.516

30 mm focal length: f/5.616 Dimensions Approx. 58 mm diameter 28 mm (distance from

camera lens mount flange when lens is retracted) Weight Approx. 85 g (3.0 oz)

1 NIKKOR 1127.5mm f/3.55.6 Type 1 mount lens Focal length 1127.5 mm Maximum aperture f/3.55.6 Construction 8 elements in 6 groups (including 1 ED lens element and

1 aspherical lens element), 1 protective glass element Angle of view 7232 20 Minimum focus distance 0.3 m (1.0 ft) from focal plane at all zoom positions Diaphragm blades 7 (rounded diaphragm opening) Diaphragm Fully automatic Aperture range 11 mm focal length: f/3.516

27.5 mm focal length: f/5.616 Filter-attachment size 40.5 mm (P = 0.5 mm) Dimensions Approx. 57.5 mm diameter 31 mm (distance from

camera lens mount flange when lens is retracted) Weight Approx. 83 g (3.0 oz)

224

n

1 NIKKOR Lenses 1 NIKKOR VR 1030mm f/3.55.6 PD-ZOOM

1 NIKKOR 1127.5mm f/3.55.6

Lens mounting mark Lens cover CPU contacts

Zoom ring

Zoom ring Lens cap Lens mounting mark

CPU contacts

Focal length mark Focal length scale

Retractable lens barrel button

225

n

1 NIKKOR lenses are exclusively for Nikon 1 interchangeable lens format digital cameras. The angle of view is equivalent to a 35 mm format lens with a focal length about 2.7 longer. The 1 NIKKOR VR 1030mm f/3.55.6 PD-ZOOM supports vibration reduction and can be used with vibration reduction On or Off selected for Optical VR in the camera menus (0 153).

Use the zoom ring to zoom in and out (0 34).

A Lens Care Keep the CPU contacts clean. Use a blower to remove dust and lint from the lens surfaces. To

remove smudges and fingerprints, apply a small amount of ethanol or lens cleaner to a soft, clean cotton cloth or lens-cleaning tissue and clean from the center outwards using a circular motion, taking care not to leave smears or touch the glass with your fingers.

Never use organic solvents such as paint thinner or benzene to clean the lens.

A lens hood or NC filter can be used to protect the front lens element. When using an optional lens hood, do not pick up or hold the lens or camera using only the hood. Lens hoods and filters are not available for the 1 NIKKOR VR 1030mm f/3.55.6 PD-ZOOM.

When the lens is not in use, attach the rear cap and either ensure that the lens is retracted and the cover closed (1 NIKKOR VR 1030mm f/3.55.6 PD-ZOOM) or attach the front cap (other lenses).

If the lens will not be used for an extended period, store it in a cool, dry location to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls.

Keep the lens dry. Rusting of the internal mechanism can cause irrep- arable damage.

Leaving the lens in extremely hot locations could damage or warp parts made from reinforced plastic.

When using the 1 NIKKOR VR 1030mm f/3.55.6 PD-ZOOM, be sure not touch the lens cover. Failure to observe this precaution could result in product malfunction.

226

n

A Supplied Accessories 40.5 mm snap-on Front Lens Cap LC-N40.5 (for use with the 1 NIKKOR

1127.5mm f/3.55.6) Rear Lens Cap LF-N1000

AOptional Accessories 40.5 mm screw-on filters (for use with the 1 NIKKOR 1127.5mm

f/3.55.6) 40.5 mm screw-on Hood HN-N102 (for use with the 1 NIKKOR

1127.5mm f/3.55.6; attaches as shown below)

227

n

The Optional FT1 Mount Adapter Read this section for information on using the optional FT1 mount adapter. Before proceeding, be sure that you have read and understood this manual and the documentation for the FT1 and lenses.

Autofocus Autofocus is available only with AF-S lenses; other lenses sup- port manual focus only. Set the camera focus mode to AF-S or AF-C. The only AF-area mode available is Single-point and the camera focuses on the subject in the center focus area only. Face priority is not supported. In some cases, a beep may sound, the in-focus indicator may be displayed, and pictures can be taken when the camera is not in focus; if this occurs, focus manually.

Manual Focus Follow the steps below to focus manually when using the FT1 with a NIKKOR F mount lens.

1 Select manual focus mode. In the shooting menu, select Focus mode, highlight Manual focus, press 2, and choose the magnification for the manual focus display from 10, 5, 2, and 1 (zoom off ) (0 157).

2 Focus. Rotate the lens focus ring until the subject is in focus.

228

n

If AF-S or AF-C is selected for Focus mode and the lens sup- ports autofocus with manual override, you can focus using autofocus and then keep the shutter-release button pressed halfway and rotate the lens focus ring to fine-tune focus man- ually. To refocus using autofocus, press the shutter-release button halfway again.

To zoom in on the display for more precise focus, press J (note that this feature is not available during movie recording or in slow-motion movie mode). The display will be zoomed in to the magnification selected in Step 1 and a navigation window will appear in a gray frame at the bottom right of the display.

Navigation window

Use the multi selector to scroll to areas of the frame not visible in the display. Press J to exit zoom.

229

n

The Electronic Rangefinder

Note that with some subjects, the in-focus indicator (I) may be displayed when the camera is not in focus. Check focus in the display before shooting.

Error Messages and Displays The following warnings appear in the camera aperture display.

Restrictions Auto and best moment capture modes are not supported. Motion Snapshots can be recorded only when an AF-S lens is

attached and the camera is in autofocus mode and then only when the subject is in focus. Do not attempt to adjust focus using the focus ring.

Shutter speeds of 1 s or slower are not available. The sound monitor switch and focus operation button (Focus

Lock/MEMORY RECALL/AF Start) have no effect.

If a CPU lens is attached in manual focus mode, the focus indicator can be used to check whether the camera is focused on the subject in the center focus area.

Focus indicator Status I In focus. 2 Camera focused in front of subject.

4 Camera focused behind subject. 2 4

Unable to determine focus. (flashes)

Display Problem Solution

FEE Lens aperture ring is not locked at minimum aperture.

When using CPU lenses, lock aperture ring at minimum aper- ture (highest f-number).

F Non-CPU lens is attached, or no lens is attached.

When using non-CPU lens, rotate lens aperture ring to adjust aper- ture.

230

n

Precautions for Use Lenses over 380 g (13.4 oz) should be supported at all times. Do

not hold the camera or carry the camera by the strap without supporting the lens. Failure to observe this precaution could damage the camera lens mount.

Lines may appear in photographs taken with non-CPU lenses stopped down to minimum aperture.

In advanced movie mode, select exposure mode A or M to pre- vent sounds made by the lens being picked up by the micro- phone.

During continuous shooting, focus is fixed at the position for the first shot in each burst. Frame rates may slow when I is selected in continuous mode.

Certain lenses will block the AF-assist illuminator and, at some distances, the flash.

The tops and bottoms may be missing from circular bokeh shapes created at wide apertures using lenses with a maximum aperture of f/1.4.

231

n

Supported Standards DCF Version 2.0: The Design Rule for Camera File Systems (DCF) is

a standard widely used in the digital camera industry to ensure compatibility among different makes of camera.

DPOF: Digital Print Order Format (DPOF) is an industry-wide standard that allows pictures to be printed from print orders stored on the memory card.

Exif version 2.3: The camera supports Exif (Exchangeable Image File Format for Digital Still Cameras) version 2.3, a standard in which information stored with photographs is used for optimal color reproduction when the images are output on Exif-com- pliant printers.

PictBridge: A standard developed through cooperation with the digital camera and printer industries, allowing photographs to be output directly to a printer without first transferring them to a computer.

HDMI: High-Definition Multimedia Interface is a standard for multimedia interfaces used in consumer electronics and AV devices capable of transmitting audiovisual data and control signals to HDMI-compliant devices via a single cable connec- tion.

232

n

A Trademark Information Mac and OS X are registered trademarks of Apple Inc. in the United States and/or other countries. Microsoft, Windows, and Windows Vista are either registered trademarks, or trademarks of Microsoft Corpora- tion in the United States and/or other countries. The PictBridge logo is a trademark. The microSD, microSDHC, and microSDXC logos are trade- marks of SD-3C, LLC. HDMI, the HDMI logo and High-Definition Multi- media Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the Wi-Fi Alliance. All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trade- marks or registered trademarks of their respective holders.

A FreeType License (FreeType2) Portions of this software are copyright 2012 The FreeType Project (http://www.freetype.org). All rights reserved.

AMIT License (HarfBuzz) Portions of this software are copyright 2014 The HarfBuzz Project (http://www.freedesktop.org/wiki/Software/HarfBuzz). All rights reserved.

233

n

Battery Life The number of shots or movie footage that can be recorded with fully-charged batteries varies with the condition of the battery, temperature, the interval between shots, and the length of time menus are displayed. Sample figures for EN-EL22 (1010 mAh) batteries are given below. Still images: Approximately 300 shots Movies: Approximately 70 minutes at 1080/30p

Measured according to CIPA standards at 23 3 C (73.4 5.4 F) with the camera at default settings, a fully-charged battery, a 1 NIKKOR VR 1030mm f/3.55.6 PD-ZOOM lens, and a 16GB SanDisk SDSDQXP-016G-J35 UHS-I microSDHC card. Value for still images obtained under the following test conditions: pho- tographs taken at intervals of 30 s with the built-in flash fired with every other shot and the camera turned off and then on after every ten shots. Value for movies obtained under the fol- lowing test conditions: a series of 20 minute movies with a file size of up to 4 GB were recorded; recording was only inter- rupted when temperature warning was displayed.

The following can reduce battery life: Keeping the shutter-release button pressed halfway Repeated autofocus operations Taking NEF (RAW) photographs Slow shutter speeds Using Wi-Fi Using vibration reduction mode with VR lenses Using zoom with power zoom lenses

To ensure that you get the most from rechargeable Nikon EN-EL22 batteries: Keep the battery contacts clean. Soiled contacts can reduce

battery performance. Use batteries immediately after charging. Batteries will lose

their charge if left unused.

234

n

Symbols C (Auto mode) ..............................6, 28 w (Creative mode) .....................6, 38 u (Best moment capture mode) . 6, 63 v (Advanced movie mode) ....6, 54, 57 z (Motion Snapshot mode) ......6, 74 h (Scene auto selector) ..............142 P (Programmed auto) .......39, 41, 142 S (Shutter-priority auto) ..39, 42, 142 A (Aperture-priority auto) ....... 39, 43, 142

M (Manual) ...........................39, 44, 142 4 (Creative palette) .................. 39, 47 5 (HDR) ....................................... 39, 48 p (Easy panorama) ................... 39, 49 q (Soft) ..................................................39 r (Miniature effect) ......................... 39 s (Selective color) ..................... 39, 52 6 (Cross process) ......................39, 53 7 (Toy camera effect) .............39, 149 c (Portrait) ......................................... 33 d (Landscape) ...................................33 f (Night portrait) ............................ 33 e (Close up) ....................................... 33 g (Night landscape) .......................33 Z (Auto) .............................................. 33 U (flexible program) ......................... 41 G (menu) button .......8, 128, 139, 164, 169, 183 K (playback) button .......... 31, 72, 78 O (delete) button 32, 61, 73, 78, 109 J (OK) button ...................................... 7 & (feature) ...........................................10 C (continuous shooting/self-timer) . 79, 81 I (continuous) .................................. 79 E (self-timer) ...................................... 81 E (exposure compensation) .........83

N (flash mode) ............................. 85, 87 L (Preset manual) ........................172 L (matrix) ..........................................149 M (centerweighted) .......................149 N (spot) ..............................................149 e (auto-area) ..................................159 c (single-point) .............................159 9 (subject tracking) ....................159 8 (Single frame) ............................... 80 Y (red-eye reduction) ............. 85, 87 p (slow sync) .................................... 87 q (rear-curtain sync) ...................... 87 N (flash-ready indicator) ................. 88

Numerics 4-second movie ................................. 57

A AC adapter .............................. 192, 195 Accessories ........................................192 Active D-Lighting ............................152 Active selection ........................63, 146 Adobe RGB ........................................151 Advanced movie mode .......6, 54, 57 AE lock ................................................187 AF ................................................ 155, 159 AF-A .....................................................155 AF-area mode ...................................159 AF-assist illuminator ......................161 AF-C .....................................................155 AF-F ......................................................155 AF-S ......................................................155 Aperture ........................................ 43, 44 Aperture-priority auto ....39, 43, 142 Attaching the lens ............................ 21 Audio ..................................................... 77 Auto distortion control .................150 Auto image capture .......................168 Auto image rotation ......................190 Auto mode .......................................... 28 Auto photography ..........................168

Index

235

n

Auto power off ......................... 23, 187 Auto-area (AF-area mode) .......... 159 Autofocus .................................155, 159 Automatic scene selection .............33 Auto-select AF ................................. 155 Available settings ........................... 202

B Basic info ..................................103, 186 Battery ........................... 16, 18, 27, 222 Beep ...................................... 29, 82, 187 Best moment capture mode .........63 Best shot ........................................69, 72 Body cap ........................................2, 193 Border (PictBridge) ........................ 124 Brightness ......................................... 178 Buffering .................................65, 70, 75 Built-in AF assist .............................. 161 Built-in flash ........................................84 Bulb ........................................................45

C Calendar ...................................107, 111 Calendar playback ......................... 107 Capture 20 frames over ................ 146 Capture NX 2 ................. 145, 181, 193 CEC ...................................................... 122 Center-weighted (Metering) ...... 149 Charging a battery ............................16 Clock ..................................... 25, 26, 189 Clock battery .......................................26 Close up ................................................33 Color space ....................................... 151 Color temperature ......................... 174 Combine 4-second movies ......... 137 Combine NMS movies .................. 138 Compatible lens .............................. 192 Computer .......................................... 114 Continuous ..........................................79 Continuous AF ................................. 155 Contrast ....................................152, 178 Creative mode ....................................38 Creative palette ...........................39, 47

Crop .....................................................134 Crop (PictBridge) .............................124 Cross process ............................... 39, 53 Custom Picture Control ...... 177, 180

D Date and time ............................25, 189 Date format ................................25, 189 Daylight saving time ...............25, 189 DCF version 2.0 ................................231 Defaults ..............................................205 Delete ......................32, 61, 73, 78, 109 Delete all images .............................109 Delete selected images ................109 Detailed display .......................... 4, 186 Detailed photo information .......104, 186

Digital Print Order Format ...........231 Display ................................................185 Display brightness ..........................185 D-Lighting .........................................132 DPOF .................................126, 127, 231 DPOF print order ................... 126, 127 Dust shield ............................... 197, 198

E Easy panorama ........................... 39, 49 Edit movie ..........................................135 Electronic VR .....................................154 Exif version 2.3 .................................231 Exposure ........................... 83, 142, 149 Exposure compensation ................. 83 Exposure indicator ............................ 45 Exposure mode ................................142

F Face priority ...............................34, 161 Face-priority zoom .........................135 Fast motion ......................................... 57 File format ..........................................148 Fill flash ................................................. 87 Filter effects ............................. 178, 179 Filter strength ...................................148

236

n

Fine-tuning white balance ..........171 Firmware version .............................191 Flash .................................... 84, 162, 163 Flash compensation .......................163 Flash control .....................................162 Flash mode ...................................85, 87 Flash range ..........................................89 Flash-ready indicator .......................88 Flexible program ............................... 41 Flicker reduction ..............................188 Focal length ......................................104 Focal length scale ...........................224 Focal plane mark ........................ 2, 158 Focus .......................................... 155, 159 Focus area ...................................29, 159 Focus lock ..........................................160 Focus mode .......................................155 Format ..........................................19, 185 Format memory card ..............19, 185 Frame rate .......................103, 166, 167 Frame size/frame rate ....................167 Frames saved (default) ..................146 FT1 ........................................................227 Full-frame playback .................31, 103 Full-time AF .......................................155

G Grid display ......................................... 30

H H.264 ....................................................220 HD movies ..................................57, 167 HDMI .......................................... 121, 231 HDMI device control ......................122 HDMI-CEC ..........................................122 HDR ........................................................48 High definition ....................... 121, 231 High ISO noise reduction .............182 Histogram ..........................................105 Hue .......................................................178 Hue (Cross process) .......................... 53

I Image processing menu ...............169 Image quality ...................................143 Image review ....................................131 Image selection ...............................130 Image size ..........................................143 Index print .........................................126 ISO sensitivity ...................................175

J JPEG .....................................................143 Jump cut .............................................. 57

L Landscape ..................................33, 176 Language ....................................25, 189 Lens .....................21, 34, 153, 192, 223 Lens cap ............................................... 22 Lens mount .......................................158 Live image control ............................ 36 Load from/save to card .................181 Long exposure NR ..........................153

M Manual ..................................39, 44, 142 Manual focus ....................................157 Matrix (Metering) ............................149 Max. shots per minute ..................168 Maximum aperture ........................223 Memory card ...18, 20, 185, 194, 206 Memory card access lamp ............. 30 Memory card capacity ..................206 Metering ............................................149 Microphone ...............................55, 168 microSD card ....................................194 Miniature effect ................................. 39 Monitor .......................................... 4, 185 Monochrome ...................................176 Motion Snapshot mode ................. 74 Mount adapter ....................... 192, 227 MOV ..................................145, 148, 208 Movie before/after .........................147 Movie menu ......................................164

237

n

Movie sound options .................... 168 Movie-record button .......................55 Movies .................................. 54, 57, 167 Multi selector ........................................ 7

N NEF (RAW) ................................143, 145 Network connection ........................93 Neutral ............................................... 176 Nikon Transfer 2 .............................. 119 NMS .................................. 145, 148, 208 Normal panorama .................144, 207 Number of copies ........................... 124 Number of shots saved ................ 146

O On release, record .......................... 146 Optical VR .......................................... 153

P Page size (PictBridge) .................... 124 Photo information ......................... 103 PictBridge .................................123, 231 Picture Control .......................176, 180 PIN-entry WPS ....................................96 Pixel mapping .................................. 191 Playback ...................................... 31, 103 Playback menu ................................ 128 Playback zoom ................................ 108 Portrait ........................................ 33, 176 Portrait (Soft) ................................... 148 Power connector ...................192, 195 Power drive zoom .............................34 Power switch .......................................23 Preset manual .........................170, 172 Press the shutter-release button all the way down ............................30, 33

Press the shutter-release button halfway .........................................29, 33

Print border ...................................... 124 Print date ........................................... 127 Print DPOF print order .................. 126 Print time stamp ............................. 124

Printing ...............................................123 Programmed auto ............39, 41, 142 Protect .................................................131 Push-button WPS .............................. 95

Q Quick adjust ......................................178

R Rating ........................................ 110, 131 Rear-curtain sync .............................. 87 Red-eye reduction ..................... 85, 87 Removing the lens from the camera 22

Reset file numbering .....................188 Reset movie options ......................166 Reset processing options .............170 Reset setup options .......................185 Reset shooting options .................142 Reset Wi-Fi settings .......................... 98 Resize ..................................................133 Retractable lens barrel button .... 22, 24, 224

Rotate tall ...........................................131

S Saturation ..........................................178 Saturation (Toy camera effect) ...149 Scene auto selector ........................142 Scene selection .................................. 39 Select color .......................................... 52 Select images for printing ...........126 Select to send to smart device ...101 Selective color ............................. 39, 52 Self-timer ............................................. 81 Sensitivity ..........................................175 Setup menu ......................................183 Sharpening ........................................178 Shooting menu ................................139 Shutter button AE lock ..................187 Shutter speed .............................. 42, 44 Shutter-priority auto ........39, 42, 142

238

n

Shutter-release button ..... 29, 33, 65, 68, 70, 75, 187

Silent photography ........................186 Single AF ............................................155 Single frame ........................................ 80 Single-point ......................................159 Size .................133, 143, 167, 216, 220 Slide show ..........................................111 Slot empty release lock .................185 Slow motion ...............................57, 166 Slow sync ............................................. 87 Slow view ............................................. 67 Smart Photo Selector .......................69 Soft ................................................39, 148 Sound settings .................................187 Speaker ................................................... 3 Spot (Metering) ................................149 sRGB .....................................................151 SSID ........................................................97 Standard .............................................176 Start printing (PictBridge) ............125 Strap .......................................................16 Subject tracking ..............................159 System requirements .....................116

T Tap shooting options .......................90 Television ...........................................121 Temperature warnings .................. xvii Thumbnail playback ......................106 Time ..............................................25, 189 Time stamp (PictBridge) ...............124 Time zone ..........................................189 Time zone and date ........................189 Timer ...................................................... 81 Toning ....................................... 178, 179 Touch screen ....................................... 11 Toy camera effect .....................39, 149 Trimming movies ............................135

U Underwater .......................................170 Underwater flash units ..................193

USB ............................................. 118, 123 USB cable ................................. 118, 123

V View SSID ............................................. 97 ViewNX 2 ............................................114 Vignetting ..........................................149 Vivid .....................................................176 Volume ........................................60, 113 VR ................................................ 153, 154

W Waterproof case .................... 170, 192 White balance ..................................170 Wide panorama ..................... 144, 207 Wi-Fi ................................................xix, 93 Wi-Fi upload ...............................99, 128 Wind noise reduction ....................168 Wireless .........................................xix, 93 Wireless Mobile Utility ............. 93, 94

Z Zoom guide ........................................ 34 Zoom ring ............................22, 34, 224

</

Manualsnet FAQs

If you want to find out how the 1 J4 Nikon works, you can view and download the Nikon 1 J4 Reference Manual on the Manualsnet website.

Yes, we have the Reference Manual for Nikon 1 J4 as well as other Nikon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Reference Manual should include all the details that are needed to use a Nikon 1 J4. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Nikon 1 J4 Reference Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Nikon 1 J4 Reference Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Nikon 1 J4 Reference Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Nikon 1 J4 Reference Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Nikon 1 J4 Reference Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.