MSI A320M-A Pro Quick Start Guide PDF

1 of 148
1 of 148

Summary of Content for MSI A320M-A Pro Quick Start Guide PDF

1< 1> Contents

Contents Safety Information ...........................................................................................2

Specifications ...................................................................................................3

Package contents ............................................................................................5

Rear I/O Panel .................................................................................................6 LAN Port LED Status Table ........................................................................................6

Overview of Components ................................................................................7 CPU Socket .................................................................................................................8 DIMM Slots..................................................................................................................9 PCI_E1~2: PCIe Expansion Slots ................................................................................9 JFP1, JFP2: Front Panel Connectors .......................................................................10 SATA1~4: SATA 6Gb/s Connectors ...........................................................................10 ATX_PWR1, CPU_PWR1: Power Connectors ...........................................................11 CPU_FAN1, SYS_FAN1: PWM Fan Connectors .......................................................11 JUSB1, JUSB2: USB 2.0 Connectors ........................................................................12 JUSB3: USB 3.2 Gen1 Connector .............................................................................12 JAUD1: Front Audio Connector ................................................................................13 JCOM1: Serial Port Connector .................................................................................13 JTPM1: TPM Module Connector ...............................................................................13 JCI1: Chassis Intrusion Connector ...........................................................................14 JBAT1: Clear CMOS (Reset BIOS) Jumper ...............................................................14

BIOS Setup .....................................................................................................15 Entering BIOS Setup .................................................................................................15 Resetting BIOS ..........................................................................................................16 Updating BIOS...........................................................................................................16

Installing OS, Drivers & Utilities ...................................................................17 Installing Windows 10 .............................................................................................17 Installing Drivers ......................................................................................................17 Installing Utilities .....................................................................................................17

Thank you for purchasing the MSI A320M-A PRO mother- board. This User Guide gives information about board layout, component overview, BIOS setup and software installation.

2 Safety Information

Safety Information The components included in this package are prone to damage from electrostatic

discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly.

Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start.

Hold the motherboard by the edges to avoid touching sensitive components. It is recommended to wear an electrostatic discharge (ESD) wrist strap when

handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard.

Store the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed.

Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case.

Do not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user.

If you need help during any installation step, please consult a certified computer technician.

Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component.

Keep this user guide for future reference. Keep this motherboard away from humidity. Make sure that your electrical outlet provides the same voltage as is indicated on

the PSU, before connecting the PSU to the electrical outlet. Place the power cord such a way that people can not step on it. Do not place

anything over the power cord. All cautions and warnings on the motherboard should be noted. If any of the following situations arises, get the motherboard checked by service

personnel: Liquid has penetrated into the computer. The motherboard has been exposed to moisture. The motherboard does not work well or you can not get it work according to

user guide. The motherboard has been dropped and damaged. The motherboard has obvious sign of breakage.

Do not leave this motherboard in an environment above 60C (140F), it may damage the motherboard.

3Safety Information Specifications

Specifications

CPU Supports 1st, 2nd and 3rd Gen AMD Ryzen / Ryzen with Radeon Vega Graphics and 2nd Gen AMD Ryzen with Radeon Graphics / Athlon with Radeon Vega Graphics and A-series / Athlon X4 Desktop Processors for Socket AM4

Chipset AMD A320 Chipset

Memory

2x DDR4 memory slots, support up to 32GB* Support 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/

3200(OC)+ MHz Dual channel memory architecture Supports non-ECC UDIMM memory Supports ECC UDIMM memory (non-ECC mode)

* Please refer www.msi.com for more information on compatible memory.

Expansion Slots

1x PCIe 3.0 x16 slot Supports x16 speed with 1st, 2nd and 3rd Gen AMD

Ryzen processors Supports x8 speed with Ryzen with Radeon Vega

Graphics and 2nd Gen AMD Ryzen with Radeon Graphics processors

Supports x4 speed with AMD Athlon with Radeon Vega Graphics Processors

1x PCIe 2.0 x1 slot

Onboard Graphics

1x DVI-D port, supports a maximum resolution of 1920x1200@60Hz*

1x HDMI port 1.4, supports a maximum resolution of 4096x2160@30Hz* * Only support when using AMD Ryzen with Radeon Vega Graphics and 2nd Gen AMD Ryzen with Radeon Graphics/ Athlon with Radeon Vega Graphics Processors * Maximum shared memory of 2048 MB

Storage AMD A320 Chipset

4x SATA 6Gb/s ports Supports RAID 0, RAID 1 and RAID 10

Continued on next page

4 Specifications

Continued from previous page

USB

AMD A320 Chipset 6x USB 3.2 Gen1 (SuperSpeed USB) (4 Type-A ports on the

back panel, 2 ports available through the internal connectors) 6x USB 2.0 (High-speed USB) ports (2 Type-A ports on the

back panel, 4 ports available through the internal connectors)

Audio Realtek ALC892 Codec 7.1-Channel High Definition Audio

LAN 1x Realtek 8111H Gigabit LAN controller

Back Panel Connectors

1x PS/2 keyboard port 1x PS/2 mouse port 1x DVI-D port 1x HDMI port 4x USB 3.2 Gen1 Type-A ports 1x LAN (RJ45) port 2x USB 2.0 Type-A ports 3x Audio jacks

Internal Connectors

1x 24-pin ATX main power connector 1x 4-pin ATX 12V power connector 4x SATA 6Gb/s connectors 1x USB 3.2 Gen1 connector (supports additional 2 USB 3.2

Gen1 ports) 2x USB 2.0 connectors (supports additional 4 USB 2.0 ports) 1x 4-pin CPU fan connector 1x 4-pin system fan connector 1x Front panel audio connector 1x Serial port connector 2x Front panel connectors 1x TPM module connector 1x Chassis Intrusion connector 1x Clear CMOS jumper

I/O Controller NUVOTON NCT5565 Controller Chip

Continued on next page

5Specifications Package contents

Continued from previous page

Hardware Monitor

CPU/System temperature detection CPU/System fan speed detection CPU/System fan speed control

Form Factor m-ATX Form Factor 8.9 in. x 7.4 in. (22.6 cm x 18.7 cm)

BIOS Features

1x 128 Mb flash UEFI AMI BIOS ACPI 6.1 , SM BIOS 2.8 Multi-language

Software

Drivers SUPER CHARGER COMMAND CENTER LIVE UPDATE 6 SMART TOOL X-BOOST CPU-Z MSI GAMING Google Chrome, Google Toolbar, Google Drive Norton Internet Security Solution

Package contents Please check the contents of your motherboard package. It should contain:

Motherboard Driver DVD Quick Installation Guide I/O Shielding SATA 6G Cable Case Badge Product Registration Card

Important If any of the above items are damaged or missing, please contact your retailer.

6 Rear I/O Panel

Rear I/O Panel

Link/ Activity LED Status Description Off No link

Yellow Linked

Blinking Data activity

Speed LED Status Description Off 10 Mbps connection

Green 100 Mbps connection

Orange 1 Gbps connection

LAN Port LED Status Table

PS/2 Keyboard

PS/2 Mouse LAN

DVI-D USB 2.0

USB 3.2 Gen1

Line-in

Mic in

Line-out

Audio 7.1-channel Configuration To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1 connector and follow the below steps. 1. Click on the Realtek HD Audio Manager > Advanced Settings to open the dialog

below.

2. Select Mute the rear output device, when a front headphone plugged in. 3. Plug your speakers to audio jacks on rear and front I/O panel. When you plug into

a device at an audio jack, a dialogue window will pop up asking you which device is current connected.

7Rear I/O Panel Overview of Components

Overview of Components

PCI_E1 JBAT1

PCI_E2

ATX_PWR1

JCOM

JUSB2

JUSB3JUSB1

JCI1

JFP1

SATA4

SATA3

SATA2

SATA1

JFP2JAUD1

JTPM1

CPU Socket

CPU_PWR1

DIMMA1 DIMMB1

SYS_FAN1

CPU_FAN1

52.00mm*

* Distance from the center of the CPU to the nearest DIMM slot.

8 Rear I/O Panel

CPU Socket Please install the CPU into the CPU socket as shown below.

1

3

5

4

6

7

8

2

Important Always unplug the power cord from the power outlet before installing or removing

the CPU. Please retain the CPU protective cap after installing the processor. MSI will deal

with Return Merchandise Authorization (RMA) requests if only the motherboard comes with the protective cap on the CPU socket.

When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability.

Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.

Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.

If you purchased a separate CPU and heatsink/ cooler, Please refer to the docu- mentation in the heatsink/ cooler package for more details about installation.

9Rear I/O Panel Rear I/O Panel

DIMM Slots Please install the memory module into the DIMM slot as shown below.

1

1 2

3

3

2

Important Due to chipset resource usage, the available capacity of memory will be a little less

than the amount of installed. Please note that the maximum capacity of addressable memory is 4GB or less

for 32-bit Windows OS due to the memory address limitation. Therefore, we recom- mended that you to install 64-bit Windows OS if you want to install more than 4GB memory on the motherboard.

PCI_E1~2: PCIe Expansion Slots

Processors

Slots

1st, 2nd and 3rd Gen AMD Ryzen

Ryzen with Radeon Vega Graphics/ 2nd Gen AMD Ryzen with Radeon Graphics and A-series/ Athlon X4

Athlon with Radeon Vega Graphics

PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4 PCI_E2 PCIe 2.0 x1 PCIe 2.0 x1 PCIe 2.0 x1

Important If you install a large and heavy graphics card, you need to use a tool such as MSI

Gaming Series Graphics Card Bolster to support its weight to prevent deformation of the slot.

When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion cards documentation to check for any necessary additional hardware or software changes.

10 Rear I/O Panel

SATA1~4: SATA 6Gb/s Connectors These connectors are SATA 6Gb/s interface ports. Each connector can connect to one SATA device.

SATA4

SATA2 SATA3 SATA1

Important Please do not fold the SATA cable at a 90-degree angle. Data loss may result

during transmission otherwise. SATA cables have identical plugs on either sides of the cable. However, it is

recommended that the flat connector be connected to the motherboard for space saving purposes.

JFP1, JFP2: Front Panel Connectors These connectors connect to the switches and LEDs on the front panel.

1

2 10

9 JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED - 5 Reset Switch 6 Power Switch 7 Reset Switch 8 Power Switch 9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

11Rear I/O Panel Rear I/O Panel

ATX_PWR1, CPU_PWR1: Power Connectors These connectors allow you to connect an ATX power supply.

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V 2 +3.3V 14 -12V 3 Ground 15 Ground 4 +5V 16 PS-ON# 5 Ground 17 Ground 6 +5V 18 Ground 7 Ground 19 Ground 8 PWR OK 20 Res 9 5VSB 21 +5V

10 +12V 22 +5V 11 +12V 23 +5V 12 +3.3V 24 Ground

Important Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.

3 2 1 4 CPU_PWR1

1 Ground 3 +12V

2 Ground 4 +12V

CPU_FAN1, SYS_FAN1: PWM Fan Connectors PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. When you plug a 3-pin (Non-PWM) fan to a fan connector in PWM mode, the fan speed will always maintain at 100%, which might create a lot of noise. You can adjust fan speed in BIOS > Advanced > Hardware Monitor.

1

CPU_FAN1/ SYS_FAN1

PWM Mode pin definition

1 Ground 2 +12V

3 Sense 4 Speed Control Signal

12 Rear I/O Panel

JUSB3: USB 3.2 Gen1 Connector These connectors allow you to connect USB 3.2 Gen1 ports on the front panel.

1 10

1120

1 Power 11 USB2.0+ 2 USB3_RX_DN 12 USB2.0- 3 USB3_RX_DP 13 Ground 4 Ground 14 USB3_TX_C_DP 5 USB3_TX_C_DN 15 USB3_TX_C_DN 6 USB3_TX_C_DP 16 Ground 7 Ground 17 USB3_RX_DP 8 USB2.0- 18 USB3_RX_DN 9 USB2.0+ 19 Power

10 NC 20 No Pin

Important Note that the Power and Ground pins must be connected correctly to avoid possible damage.

JUSB1, JUSB2: USB 2.0 Connectors These connectors allow you to connect USB 2.0 ports on the front panel.

1

2 10

9

1 VCC 2 VCC 3 USB0- 4 USB1- 5 USB0+ 6 USB1+ 7 Ground 8 Ground 9 No Pin 10 NC

Important Note that the VCC and Ground pins must be connected correctly to avoid possible

damage. In order to recharge your iPad,iPhone and iPod through USB ports, please install

MSI SUPER CHARGER software.

13Rear I/O Panel Rear I/O Panel

JAUD1: Front Audio Connector This connector allow you to connect audio jacks on the front panel.

1

2 10

9

1 MIC L 2 Ground 3 MIC R 4 NC 5 Head Phone R 6 MIC Detection 7 SENSE_SEND 8 No Pin 9 Head Phone L 10 Head Phone Detection

JCOM1: Serial Port Connector This connector allows you to connect the optional serial port with bracket.

1

2 10

9

1 DCD 2 SIN 3 SOUT 4 DTR 5 Ground 6 DSR 7 RTS 8 CTS 9 RI 10 No Pin

JTPM1: TPM Module Connector This connector is for TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages.

1

2 14

13

1 LPC Clock 2 3V Standby power 3 LPC Reset 4 3.3V Power 5 LPC address & data pin0 6 Serial IRQ 7 LPC address & data pin1 8 5V Power 9 LPC address & data pin2 10 No Pin

11 LPC address & data pin3 12 Ground 13 LPC Frame 14 Ground

14 Rear I/O Panel

JBAT1: Clear CMOS (Reset BIOS) Jumper There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the system configuration, set the jumpers to clear the CMOS memory.

Keep Data (default)

Clear CMOS/ Reset BIOS

Resetting BIOS to default values 1. Power off the computer and unplug the power cord 2. Use a jumper cap to short JBAT1 for about 5-10 seconds. 3. Remove the jumper cap from JBAT1. 4. Plug the power cord and power on the computer.

JCI1: Chassis Intrusion Connector This connector allows you to connect the chassis intrusion switch cable.

Normal (default)

Trigger the chassis intrusion event

Using chassis intrusion detector 1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the

chassis. 2. Close the chassis cover. 3. Go to BIOS > Security > Chassis Intrusion Configuration. 4. Set Chassis Intrusion to Enabled. 5. Press F10 to save and exit and then press the Enter key to select Yes. 6. Once the chassis cover is opened again, a warning message will be displayed on

screen when the computer is turned on.

Resetting the chassis intrusion warning 1. Go to BIOS > Security > Chassis Intrusion Configuration. 2. Set Chassis Intrusion to Reset. 3. Press F10 to save and exit and then press the Enter key to select Yes.

15Rear I/O Panel BIOS Setup

BIOS Setup The default settings offer the optimal performance for system stability in normal conditions. You should always keep the default settings to avoid possible system damage or failure booting unless you are familiar with BIOS.

Important BIOS items are continuous update for better system performance. Therefore, the

description may be slightly different from the latest BIOS and should be held for reference only. You could also refer to the HELP information panel for BIOS item description.

The pictures in this chapter are for reference only and may vary from the product you purchased.

The BIOS items will vary with the processor.

Entering BIOS Setup Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot Menu message appears on the screen during the boot process.

Function key F1: General Help list F4: Enter CPU Specifications menu F5: Enter Memory-Z menu F6: Load optimized defaults F10: Save Change and Reset* F12: Take a screenshot and save it to USB flash drive (FAT/ FAT32 format only).

* When you press F10, a confirmation window appears and it provides the modification information. Select between Yes or No to confirm your choice.

16 BIOS Setup

Resetting BIOS You might need to restore the default BIOS setting to solve certain problems. There are several ways to reset BIOS:

Go to BIOS and press F6 to load optimized defaults. Short the Clear CMOS jumper on the motherboard.

Important Please refer to the Clear CMOS jumper section for resetting BIOS.

Updating BIOS Updating BIOS with M-FLASH Before updating: Please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file into the USB flash drive. Updating BIOS: 1. Insert the USB flash drive that contains the update file into the computer. 2. Press Del key to enter the BIOS Setup during POST. 3. Go to BIOS > M-FLASH > Select one file to update BIOS, select a BIOS file to

perform the BIOS update process. 4. After the flashing process is 100% completed, the system will reboot

automatically.

Updating the BIOS with Live Update 6 Before updating: Make sure the LAN driver is already installed and the internet connection is set properly. Updating BIOS: 1. Install and launch MSI LIVE UPDATE 6. 2. Select BIOS Update. 3. Click on Scan button. 4. Click on Download icon to download and install the latest BIOS file. 5. Click Next and choose In Windows mode. And then click Next and Start to start

updating BIOS. 6. After the flashing process is 100% completed, the system will restart

automatically.

17BIOS Setup Installing OS, Drivers & Utilities

Installing OS, Drivers & Utilities Please download and update the latest utilities and drivers at www.msi.com

Installing Windows 10 1. Power on the computer. 2. Insert the Windows 10 installation disc/USB into your computer. 3. Press the Restart button on the computer case. 4. Press F11 key during the computer POST (Power-On Self Test) to get into Boot

Menu. 5. Select the Windows 10 installation disc/USB from the Boot Menu. 6. Press any key when screen shows Press any key to boot from CD or DVD...

message. 7. Follow the instructions on the screen to install Windows 10.

Installing Drivers 1. Start up your computer in Windows 10. 2. Insert MSI Driver Disc into your optical drive. 3. Click the Select to choose what happens with this disc pop-up notification,

then select Run DVDSetup.exe to open the installer. If you turn off the AutoPlay feature from the Windows Control Panel, you can still manually execute the DVDSetup.exe from the root path of the MSI Driver Disc.

4. The installer will find and list all necessary drivers in the Drivers/Software tab. 5. Click the Install button in the lower-right corner of the window. 6. The drivers installation will then be in progress, after it has finished it will prompt

you to restart. 7. Click OK button to finish. 8. Restart your computer.

Installing Utilities Before you install utilities, you must complete drivers installation. 1. Open the installer as described above. 2. Click the Utilities tab. 3. Select the utilities you want to install. 4. Click the Install button in the lower-right corner of the window. 5. The utilities installation will then be in progress, after it has finished it will

prompt you to restart. 6. Click OK button to finish. 7. Restart your computer.

18 Installing OS, Drivers & Utilities

1< 1>

..........................................................................................................2

...................................................................................................................3

........................................................................................................5

I/O .....................................................................................................6 LAN LED ...........................................................................................6

........................................................................................................7 CPU .....................................................................................................................8 DIMM ...................................................................................................................9 PCI_E1~2: PCIe ..........................................................................................9 JFP1, JFP2: ....................................................................................10 SATA1~4: SATA 6Gb/s ...................................................................................10 ATX_PWR1, CPU_PWR1: .......................................................................11 CPU_FAN1, SYS_FAN1: PWM ..................................................................11 JUSB1, JUSB2: USB 2.0 ................................................................................12 JUSB3: USB 3.2 Gen1 ....................................................................................12 JAUD1: .......................................................................................13 JCOM1: .......................................................................................13 JTPM1: TPM ..........................................................................................13 JCI1: ..............................................................................................14 JBAT1: CMOS (Reset BIOS) ...................................................................14

BIOS() ........................................................................................15 BIOS ..................................................................................................................15 BIOS ..................................................................................................................16 BIOS() ............................................................................................16

OS, & ...................................................................17 Windows 10 ...............................................................................................17 .....................................................................................................17 ......................................................................................................17

MSI A320M-A PRO . , , BIOS .

2

(ESD)

. . ,

.

. ESD

. ESD , .

.

.

. , .

.

. . . PSU PSU

. . . . , .

. . . . .

60C (140F) . .

3

CPU AM4 1,2 3 AMD Ryzen / Radeon Ryzen/ Radeon 2 AMD Ryzen / Radeon Athlon A-series / Athlon X4

AMD A320

DDR4 2, 32GB * 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/ 3200(OC)+ MHz

non-ECC UDIMM ECC UDIMM (non-ECC )

* www.msi. com .

PCIe 3.0 x16 1 1,2 3 AMD Ryzen x16 Radeon Ryzen Radeon

2 AMD Ryzen x8 Radeon AMD Athlon

x4 PCIe 2.0 x1 1

DVI-D 1, 1920x1200@60Hz * HDMI 1.4 1, 4096x2160@30Hz *

* Radeon AMD Ryzen Radeon 2 AMD Ryzen / Radeon Athlon . * 2048 MB

AMD A320

SATA 6Gb/s 4 RAID 0, RAID 1 RAID 10

4

USB

AMD A320 USB 3.2 Gen1 ( USB) 6 ( A 4

, 2) USB 2.0 ( USB) 6 ( A 2,

4)

Realtek ALC892 7.1- HD

LAN Realtek 8111H Gigabit LAN 1

PS/2 1 PS/2 1 DVI-D 1 HDMI 1 USB 3.2 Gen1 A 4 LAN (RJ45) 1 USB 2.0 A 2 3

24 ATX 1 4 ATX 12V 1 SATA 6Gb/s 4 USB 3.2 Gen1 1 ( USB 3.2 Gen1 2) USB 2.0 2 ( USB 2.0 4) 4 CPU 1 4 1 1 1 2 TPM 1 1 CMOS 1

I/O NUVOTON NCT5565

5

CPU/ CPU/ CPU/

m-ATX 8.9 in. x 7.4 in. (22.6 cm x 18.7 cm)

BIOS

128 Mb 1 UEFI AMI BIOS ACPI 6.1 , SM BIOS 2.8

6 X- CPU-Z MSI : , ,

. :

DVD I/O SATA 6G

.

6 I/O

I/O

LAN LED

PS/2

PS/2 LAN

DVI-D USB 2.0

USB 3.2 Gen1

7.1- 7.1 I/O JAUD1 . . 1. Realtek HD Audio Manager(Realtek HD ) > Advanced Settings(

) .

2. Mute the rear output device, when a front headphone plugged in( ) .

3. I/O . .

/ LED

LAN .

LAN .

LAN .

LED

10 Mbps .

100 Mbps .

1 Gbps .

7 I/O

PCI_E1 JBAT1

PCI_E2

ATX_PWR1

JCOM

JUSB2

JUSB3JUSB1

JCI1

JFP1

SATA4

SATA3

SATA2

SATA1

JFP2JAUD1

JTPM1

CPU

CPU_PWR1

DIMMA1 DIMMB1

SYS_FAN1

CPU_FAN1

52.00mm*

* CPU DIMM

8 I/O

CPU CPU CPU .

1

3

5

4

6

7

8

2

CPU . , CPU . CPU

MSI (RMA) CPU , CPU . CPU .

CPU , CPU . CPU .

CPU . CPU CPU

. CPU ( ) .

CPU / , / .

9 I/O I/O

DIMM DIMM .

1

1 2

3

3

2

. 4GB 32-(Windows OS)

. 4GB 64- Windows OS

PCI_E1~2: PCIe

,

MSI .

. .

1, 2 3 AMD Ryzen

Radeon Ryzen/ Radeon 2 AMD Ryzen A- / Athlon X4

Radeon Athlon

PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4 PCI_E2 PCIe 2.0 x1 PCIe 2.0 x1 PCIe 2.0 x1

10 I/O

SATA1~4: SATA 6Gb/s SATA 6Gb/s . SATA .

SATA4

SATA2 SATA3 SATA1

SATA 90 . , . SATA

.

JFP1, JFP2: LED .

1

2 10

9 JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED - 5 Reset Switch 6 Power Switch 7 Reset Switch 8 Power Switch 9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

11 I/O I/O

ATX_PWR1, CPU_PWR1: ATX .

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V 2 +3.3V 14 -12V 3 Ground 15 Ground 4 +5V 16 PS-ON# 5 Ground 17 Ground 6 +5V 18 Ground 7 Ground 19 Ground 8 PWR OK 20 Res 9 5VSB 21 +5V

10 +12V 22 +5V 11 +12V 23 +5V 12 +3.3V 24 Ground

ATX .

3 2 1 4 CPU_PWR1

1 Ground 3 +12V

2 Ground 4 +12V

CPU_FAN1, SYS_FAN1: PWM PWM 12V . PWM 3- (Non-PWM) , 100% . BIOS > Advanced > Hardware Monitor( ) .

1

CPU_FAN1/ SYS_FAN1

PWM

1 Ground 2 +12V

3 Sense 4 Speed Control Signal

12 I/O

JUSB3: USB 3.2 Gen1 USB 3.2 Gen1 .

1 10

1120

1 Power 11 USB2.0+ 2 USB3_RX_DN 12 USB2.0- 3 USB3_RX_DP 13 Ground 4 Ground 14 USB3_TX_C_DP 5 USB3_TX_C_DN 15 USB3_TX_C_DN 6 USB3_TX_C_DP 16 Ground 7 Ground 17 USB3_RX_DP 8 USB2.0- 18 USB3_RX_DN 9 USB2.0+ 19 Power

10 NC 20 No Pin

.

JUSB1, JUSB2: USB 2.0 USB 2.0 .

1

2 10

9

1 VCC 2 VCC 3 USB0- 4 USB1- 5 USB0+ 6 USB1+ 7 Ground 8 Ground 9 No Pin 10 NC

VCC . USB iPad,iPhone iPod MSI SUPER CHARGER

.

13 I/O I/O

JAUD1: .

1

2 10

9

1 MIC L 2 Ground 3 MIC R 4 NC 5 Head Phone R 6 MIC Detection 7 SENSE_SEND 8 No Pin 9 Head Phone L 10 Head Phone Detection

JCOM1: .

1

2 10

9

1 DCD 2 SIN 3 SOUT 4 DTR 5 Ground 6 DSR 7 RTS 8 CTS 9 RI 10 No Pin

JTPM1: TPM TPM (Trusted Platform Module) . TPM .

1

2 14

13

1 LPC Clock 2 3V Standby power 3 LPC Reset 4 3.3V Power 5 LPC address & data pin0 6 Serial IRQ 7 LPC address & data pin1 8 5V Power 9 LPC address & data pin2 10 No Pin

11 LPC address & data pin3 12 Ground 13 LPC Frame 14 Ground

14 I/O

JBAT1: CMOS (Reset BIOS) CMOS . CMOS .

( )

CMOS / BIOS

BIOS 1. . 2. JBAT1 5-10 . 3. JBAT1 . 4. .

JCI1: .

( )

1. JCI1 / . 2. . 3. BIOS > Security() > Chassis Intrusion Configuration( )

. 4. Chassis Intrusion( ) Enabled() . 5. F10 . Enter Yes . 6. .

1. BIOS > Security() > Chassis Intrusion Configuration( )

. 2. Chassis Intrusion( ) Reset() . 3. F10 . Enter Yes .

15 I/O BIOS()

BIOS() . BIOS , .

BIOS .

BIOS . BIOS HELP() .

. BIOS .

BIOS DEL , F11 Delete .

F1: F4: CPU F5: Memory-Z(-Z) F6: F10: * F12: USB (FAT/ FAT32 ).

* F10 . Yes() No() .

16 BIOS()

BIOS BIOS . BIOS .

BIOS F6 . CMOS .

BIOS CMOS .

BIOS() M-FLASH BIOS BIOS MSI BIOS USB . BIOS : 1. USB . 2. POST Del BIOS . 3. BIOS > M-FLASH > Select one file to update BIOS , BIOS

BIOS . 4. 100% .

Live Update 6 BIOS LAN . BIOS : 1. MSI LIVE UPDATE 6 . 2. BIOS Update . 3. Scan . 4. Download BIOS . 5. Next In Windows mode Next Start BIOS

. 6. 100% .

17BIOS() OS, &

OS, & www.msi.com .

Windows 10 1. . 2. Windows 10 /USB . 3. Restart . 4. POST (Power-On Self Test) F11 . 5. Windows 10 /USB . 6. Press any key to boot from CD or DVD...

. 7. Windows 10 .

1. Windows 10 . 2. MSI . 3. Select to choose what happens with this disc , Run

DVDSetup.exe . MSI DVDSetup.exe .

4. Drivers/Software . 5. Install . 6. . . 7. OK . 8. .

. 1. . 2. Utilities . 3. . 4. Install . 5. . . 6. OK . 7. .

18 OS, &

1< 1> Table des matires

Table des matires Informations de scurit .................................................................................2

Spcifications ...................................................................................................3

Contenu ............................................................................................................5

Panneau arrire Entre / Sortie .....................................................................6 Tableau explicatif de ltat de la LED du port LAN ....................................................6

Vue densemble des composants ...................................................................7 Socket processeur ......................................................................................................8 Slots DIMM .................................................................................................................9 PCI_E1~2 : Slots dextension PCIe .............................................................................9 JFP1, JFP2 : Connecteurs de panneau avant ..........................................................10 SATA1~4 : Connecteurs SATA 6Gb/s ........................................................................10 ATX_PWR1, CPU_PWR1 : Connecteurs dalimentation ...........................................11 CPU_FAN1, SYS_FAN1 : Connecteurs de ventilateur PWM ....................................11 JUSB1, JUSB2 : Connecteurs USB 2.0 .....................................................................12 JUSB3 : Connecteur USB 3.2 Gen1 ..........................................................................12 JAUD1 : Connecteur audio avant..............................................................................13 JCOM1 : Connecteur de port srie ...........................................................................13 JTPM1 : Connecteur de module TPM .......................................................................13 JCI1 : Connecteur intrusion chssis ........................................................................14 JBAT1 : Cavalier Clear CMOS (Rinitialisation BIOS) ..............................................14

Configuration du BIOS ...................................................................................15 Entrer dans linterface Setup du BIOS .....................................................................15 Rinitialiser le BIOS .................................................................................................16 Mettre le BIOS jour ................................................................................................16

Installer OS, Pilotes & Utilitaires ..................................................................17 Installer Windows 10 ..............................................................................................17 Installer les pilotes ...................................................................................................17 Installer les utilitaires ..............................................................................................18

Merci davoir achet une carte mre MSI A320M-A PRO. Ce manuel dutilisateur fournit des informations sur le schma, la vue densemble des composants, la configuration du BIOS et linstallation des logiciels.

2 Informations de scurit

Informations de scurit Les composants dans lemballage peuvent tre endommags par des dcharges

lectrostatiques (ESD). Pour vous assurer de correctement monter votre ordinateur, veuillez vous rfrer aux instructions ci-dessous.

Assurez-vous de bien connecter tous les composants. En cas de mauvaise connexion, il se peut que lordinateur ne reconnaisse pas le composant et que le dmarrage choue.

Veuillez tenir la carte mre par les bords pour viter de toucher les composants sensibles.

Il est recommand de porter un bracelet antistatique lors de la manipulation de la carte mre pour prvenir tout dommage. Si vous navez pas de bracelet antistatique, touchez un objet mtallique reli la terre avant de manipuler la carte mre afin de vous dcharger de votre charge statique. Touchez rgulirement lobjet mtallique pendant toute la manipulation.

Tant que la carte mre nest pas installe, conservez-la dans un rcipient protg contre les ondes lectrostatiques ou sur une couche antistatique.

Avant de dmarrer lordinateur, vrifiez si toutes les vis et les composants mtalliques sont bien fixs sur la carte mre ou ailleurs dans le botier de lordinateur.

Ne dmarrez pas lordinateur avant davoir termin linstallation. Ceci peut endommager les composants ou vous blesser.

Si vous avez besoin daide pendant linstallation, veuillez consulter un technicien informatique certifi.

Avant dinstaller les composants dordinateur, veuillez toujours mettre hors tension et dbrancher le cordon dalimentation.

Gardez ce manuel pour rfrences futures. Protgez ce manuel contre lhumidit. Avant de brancher le bloc dalimentation sur la sortie lectrique, veuillez

vous assurer que la tension de la sortie lectrique est bien gale celle du bloc dalimentation.

Placez le cordon dalimentation de faon viter que lon marche dessus. Ne posez rien sur le cordon dalimentation.

Veuillez prter attention toutes les alertes et remarques indiques sur la carte mre.

Dans un cas comme ci-dessous, faites appel au service autoris pour vrifier votre carte mre :

Un liquide a pntr dans lordinateur. La carte mre a t expose de lhumidit. La carte mre ne fonctionne pas comme indiqu dans les instructions. La carte mre est tombe par terre et a t endommage. La carte mre est casse.

Ne pas mettre la carte mre dans un environnement dont la temprature est suprieure 60C (140F) sous peine de lendommager.

3Informations de scurit Spcifications

Spcifications

CPU

Socket AM4 pour processeurs AMD Ryzen de 1re, 2me et 3me gnration / Ryzen avec curs graphiques Radeon Vega / AMD Ryzen avec curs graphiques Radeon de 2me gnration / Athlon avec curs graphiques Radeon Vega et srie A / Athlon X 4

Chipset Chipset AMD A320

Mmoire

2 x slots pour mmoire DDR4, support jusqu 32GO* Support 1866 / 2133 / 2400 / 2667(OC) / 2933(OC) /

3200(OC)+ MHz Architecture mmoire double canal Support mmoire non-ECC UDIMM Support mmoire ECC UDIMM (mode non-ECC)

* Veuillez vous rfrer au site www.msi.com pour plus dinformations sur la mmoire compatible.

Slots dextension

1 x slot PCIe 3.0 x 16 Le mode x 16 est support par les processeurs AMD

Ryzen de 1re, 2me et 3me gnration Le mode x 8 est support par les processeurs

Ryzen avec curs graphiques Radeon Vega et par les processeurs AMD Ryzen avec curs graphiques Radeon de 2me gnration

Le mode x 4 est support par les processeurs AMD Athlon avec curs graphiques Radeon Vega

1 x slot PCIe 2.0 x 1

Sorties vido intgres

1 x port DVI-D, supportant une rsolution maximum de 1920 x 1200@60Hz*

1 x port HDMI 1.4, supportant une rsolution maximum de 4096 x 2160@30Hz* * Cette rsolution est seulement supporte lors de lutilisation des processeurs AMD Ryzen avec curs graphiques Radeon Vega / AMD Ryzen avec curs graphiques Radeon de 2me gnration / Athlon avec curs graphiques Radeon Vega * La mmoire partage maximale est de 2048 MB

Stockage Chipset AMD A320

4 x ports SATA 6Gb/s Support des architectures RAID 0, RAID 1 et RAID 10

Suite du tableau sur la page suivante

4 Spcifications

Suite du tableau de la page prcdente

USB

Chipset AMD A320 6 x ports USB 3.2 Gen1 (SuperSpeed USB) (4 ports Type-A

sur le panneau arrire, 2 ports disponibles par lintermdiaire des connecteurs internes)

6 x ports USB 2.0 (High-speed USB) (2 ports Type-A sur le panneau arrire, 4 ports disponibles par lintermdiaire des connecteurs internes)

Audio Realtek ALC892 Codec Audio haute dfinition 7,1

LAN 1 x contrleur Realtek 8111H Gigabit LAN

Connecteurs sur le panneau arrire

1 x port clavier PS/2 1 x port souris PS/2 1 x port DVI-D 1 x port HDMI 4 x ports USB 3.2 Gen1 Type-A 1 x port LAN (RJ45) 2 x ports USB 2.0 Type-A 3 x jacks audio

Connecteurs internes

1 x connecteur dalimentation principal ATX 24 broches 1 x connecteur dalimentation ATX 12V 4 broches 4 x connecteurs SATA 6Gb/s 1 x connecteur USB 3.2 Gen1 (support de 2 autres ports USB

3.2 Gen1) 2 x connecteurs USB 2.0 (support de 4 autres ports USB 2.0) 1 x connecteur de ventilateur CPU 4 broches 1 x connecteur de ventilateur systme 4 broches 1 x connecteur audio avant 1 x connecteur de port srie 2 x connecteurs de panneau avant 1 x connecteur de module TPM 1 x connecteur intrusion chssis 1 x cavalier Clear CMOS

Contrleur E/S Contrleur NUVOTON NCT5565

Suite du tableau sur la page suivante

5Spcifications Contenu

Suite du tableau de la page prcdente

Moniteur systme

Dtection de la temprature du CPU et du systme Dtection de la vitesse du ventilateur du CPU et du systme Contrle de la vitesse du ventilateur du CPU et du systme

Dimensions Format m-ATX 22,6 cm x 18,7 cm (8,9 x 7,4)

Fonctions BIOS

1 x flash 128 Mb UEFI AMI BIOS ACPI 6.1, SM BIOS 2.8 Multilingue

Logiciel

Pilotes SUPER CHARGER COMMAND CENTER LIVE UPDATE 6 SMART TOOL X-BOOST CPU-Z MSI GAMING Google Chrome, Google Toolbar, Google Drive Norton Internet Security Solution

Contenu Vrifiez tous les articles dans le carton demballage de votre carte mre. Lemballage doit contenir :

Carte mre DVD de pilotes Guide dinstallation rapide Protection I/O Shielding Cble SATA 6G Insigne pour chssis Carte denregistrement de produit

Important Veuillez contacter votre revendeur si un des lments ci-dessus est endommag ou manquant.

6 Panneau arrire Entre / Sortie

Panneau arrire Entre / Sortie

LED indiquant la connexion et lactivit Etat Description Eteint Pas de connexion

Jaune Connexion correcte

Clignote Activit en cours

LED indiquant la vitesse Etat Description Eteint Dbit de 10 Mbps

Vert Dbit de 100 Mbps

Orange Dbit de 1 Gbps

Tableau explicatif de ltat de la LED du port LAN

Clavier PS/2

Souris PS/2 LAN

DVI-D USB 2.0

USB 3.2 Gen1

Entre Ligne

Entre Microphone

Sortie Ligne

Configuration audio 7.1 Pour rgler le systme audio 7,1, connectez le module audio entre / sortie du panneau avant au connecteur JAUD1 et suivez les tapes ci-dessous. 1. Cliquez sur Realtek HD Audio Manager > Advanced Settings (Paramtres

avancs) pour ouvrir le dialogue suivant.

2. Choisissez Mute the rear output device, when a front headphone plugged in (Passer le priphrique arrire en silencieux quand un casque est branch lavant).

3. Branchez vos haut-parleurs aux prises audio sur les panneaux entre / sortie arrire et avant. Lorsquun priphrique est branch sur une prise audio, une fentre de dialogue apparatet vous demande de choisir le priphrique connect que vous souhaitez utiliser.

7Panneau arrire Entre / Sortie Vue densemble des composants

Vue densemble des composants

PCI_E1 JBAT1

PCI_E2

ATX_PWR1

JCOM

JUSB2

JUSB3JUSB1

JCI1

JFP1

SATA4

SATA3

SATA2

SATA1

JFP2JAUD1

JTPM1

Socket processeur

CPU_PWR1

DIMMA1 DIMMB1

SYS_FAN1

CPU_FAN1

52.00mm*

* Distance entre le centre du CPU et le slot DIMM le plus proche.

8 Vue densemble des composants

Socket processeur Installer le CPU dans le socket du processeur comme indiqu ci-dessous.

1

3

5

4

6

7

8

2

Important Avant dinstaller ou de retirer le processeur du socket, veillez toujours dbranch-

er le cble dalimentation de la prise lectrique. Veuillez garder le capot de protection du processeur aprs linstallation du

processeur. Selon les exigences de RMA (Return Merchandise Authorization), MSI nacceptera pas les cartes mre dont le capot de protection aura t retir.

Lors de linstallation dun processeur, noubliez pas dinstaller un ventilateur pour processeur. Un ventilateur de processeur est ncessaire pour protger le proces- seur contre la surchauffe et maintenir la stabilit du systme.

Assurez-vous de ltanchit entre le ventilateur et le processeur avant de dmar- rer votre systme.

La surchauffe peut facilement endommager le processeur et la carte mre. Assurez-vous toujours que le systme de refroidissement fonctionne correctement pour protger le processeur de la surchauffe. Assurez-vous dappliquer une couche de pte thermique (ou adhsif thermique) entre le processeur et le systme de refroidissement afin damliorer la dissipation de la chaleur.

Si vous avez achetez un processeur indpendamment du ventilateur, veuillez vous rfrer la documentation dans le paquet du ventilateur pour plus dinformations concernant linstallation.

9Vue densemble des composants Vue densemble des composants

Slots DIMM Insrer le module de mmoire dans lemplacement DIMM comme indiqu ci- dessous.

1

1 2

3

3

2

Important Du fait des ressources utilises par le chipset, la capacit de mmoire disponible

est un peu moins leve que celle installe. Veuillez noter que la capacit maximum de la mmoire est de 4 GO ou moins pour

le systme dexploitation Windows 32-bit du fait de la limitation de mmoire. Par consquent, il est recommand dinstaller le systme dexploitation Windows 64-bit si vous voulez installer une mmoire de plus de 4 GO sur la carte mre.

PCI_E1~2 : Slots dextension PCIe

Processeurs

Slots

AMD Ryzen de 1re, 2me et 3me gnration

Ryzen avec curs graphiques Radeon Vega / AMD Ryzen avec curs graphiques Radeon de 2me gnration et srie A / Athlon X4

Athlon avec curs graphiques Radeon Vega

PCI_E1 PCIe 3.0 x 16 PCIe 3.0 x 8 PCIe 3.0 x 4 PCI_E2 PCIe 2.0 x 1 PCIe 2.0 x 1 PCIe 2.0 x 1

Important Si vous installez une carte graphique lourde, il vous faut utiliser un outil comme

la barre de support MSI Gaming Series pour supporter son poids et pour viter la dformation du slot.

Veillez toujours mettre lordinateur hors tension et dbrancher le cordon dal- imentation avant dinstaller les cartes dextension. Rfrez-vous la documentation des cartes pour vrifier si un composant ou un logiciel doit tre modifi.

10 Vue densemble des composants

JFP1, JFP2 : Connecteurs de panneau avant Ces connecteurs se lient aux interrupteurs et indicateurs LED du panneau avant.

1

2 10

9 JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED - 5 Reset Switch 6 Power Switch 7 Reset Switch 8 Power Switch 9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

SATA1~4 : Connecteurs SATA 6Gb/s Ces connecteurs utilisent une interface SATA 6Gb/s. Chaque connecteur peut tre reli un appareil SATA.

SATA4

SATA2 SATA3 SATA1

Important Veuillez ne pas plier le cble SATA 90 car cela pourrait entraner une perte de

donnes pendant la transmission. Le cble SATA dispose de prises identiques sur chaque ct. Nanmoins, il est

recommand de connecter la prise plate sur la carte mre pour un gain despace.

11Vue densemble des composants Vue densemble des composants

ATX_PWR1, CPU_PWR1 : Connecteurs dalimentation Ces connecteurs vous permettent de relier une alimentation ATX.

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V 2 +3.3V 14 -12V 3 Ground 15 Ground 4 +5V 16 PS-ON# 5 Ground 17 Ground 6 +5V 18 Ground 7 Ground 19 Ground 8 PWR OK 20 Res 9 5VSB 21 +5V

10 +12V 22 +5V 11 +12V 23 +5V 12 +3.3V 24 Ground

Important Veuillez vous assurer que tous les cbles dalimentation sont branchs aux connecteurs adquats afin garantir une opration stable de la carte mre.

3 2 1 4 CPU_PWR1

1 Ground 3 +12V

2 Ground 4 +12V

CPU_FAN1, SYS_FAN1 : Connecteurs de ventilateur PWM En mode PWM, les connecteurs fournissent une sortie de 12V constante et ajustent la vitesse des ventilateurs avec un signal de contrle de vitesse. Quand vous branchez un ventilateur 3 broches (Non-PWM) un connecteur de ventilateur de mode PWM, la vitesse sera toujours maintenue 100% et cela occasionnera du bruit. Vous pouvez ajuster la vitesse des ventilateurs dans le BIOS > Advanced > Hardware Monitor.

1

CPU_FAN1 / SYS_FAN1

Dfinition des broches en mode PWM

1 Ground 2 +12V

3 Sense 4 Speed Control Signal

12 Vue densemble des composants

JUSB3 : Connecteur USB 3.2 Gen1 Ces connecteurs vous permettent de relier des ports USB 3.2 Gen1 sur le panneau avant.

1 10

1120

1 Power 11 USB2.0+ 2 USB3_RX_DN 12 USB2.0- 3 USB3_RX_DP 13 Ground 4 Ground 14 USB3_TX_C_DP 5 USB3_TX_C_DN 15 USB3_TX_C_DN 6 USB3_TX_C_DP 16 Ground 7 Ground 17 USB3_RX_DP 8 USB2.0- 18 USB3_RX_DN 9 USB2.0+ 19 Power

10 NC 20 No Pin

Important Notez que les cbles dalimentation et de terre doivent tre branchs correctement afin dviter dendommager la carte.

JUSB1, JUSB2 : Connecteurs USB 2.0 Ces connecteurs vous permettent de relier des ports USB 2.0 sur le panneau avant.

1

2 10

9

1 VCC 2 VCC 3 USB0- 4 USB1- 5 USB0+ 6 USB1+ 7 Ground 8 Ground 9 No Pin 10 NC

Important Notez que les broches VCC et Terre doivent tre branches correctement afin

dviter tout dommage sur la carte mre. Pour recharger votre iPad, iPhone ou iPod par lintermdiaire dun port USB,

veuillez installer le logiciel MSI SUPER CHARGER.

13Vue densemble des composants Vue densemble des composants

JAUD1 : Connecteur audio avant Ce connecteur se lie aux jacks audio du panneau avant.

1

2 10

9

1 MIC L 2 Ground 3 MIC R 4 NC 5 Head Phone R 6 MIC Detection 7 SENSE_SEND 8 No Pin 9 Head Phone L 10 Head Phone Detection

JCOM1 : Connecteur de port srie Ce connecteur vous permet de relier un port srie en option.

1

2 10

9

1 DCD 2 SIN 3 SOUT 4 DTR 5 Ground 6 DSR 7 RTS 8 CTS 9 RI 10 No Pin

JTPM1 : Connecteur de module TPM Ce connecteur est reli un module TPM (Trusted Platform Module). Veuillez vous rfrer au manuel du module TPM pour plus dinformations.

1

2 14

13

1 LPC Clock 2 3V Standby power 3 LPC Reset 4 3.3V Power 5 LPC address & data pin0 6 Serial IRQ 7 LPC address & data pin1 8 5V Power 9 LPC address & data pin2 10 No Pin

11 LPC address & data pin3 12 Ground 13 LPC Frame 14 Ground

14 Vue densemble des composants

JCI1 : Connecteur intrusion chssis Ce connecteur est reli un cble dinterrupteur intrusion chssis.

Normal (dfaut)

Commencer lactivit intrusion chssis

Utilisation du dtecteur dintrusion chssis 1. Reliez le connecteur JCI1 linterrupteur ou au capteur dintrusion chssis situ

sur le botier du PC. 2. Fermez le couvercle du botier. 3. Allez dans le BIOS > Security (Scurit) > Chassis Intrusion Configuration

(Configuration intrusion chssis). 4. Rglez Chassis Intrusion (Intrusion chssis) sur Enabled (Activ). 5. Appuyez sur F10 pour sauvegarder et quitter. Ensuite appuyez sur la touche

Enter (Entre) pour choisir Yes (Oui). 6. Dsormais, si le botier du PC est ouvert quand lordinateur est allum, vous

recevrez un message dalerte lcran.

Rinitialisation de lalerte intrusion chssis 1. Allez dans le BIOS > Security (Scurit) > Chassis Intrusion Configuration

(Configuration intrusion chssis). 2. Mettez Chassis Intrusion (Intrusion chssis) en Reset (Remettre). 3. Appuyez sur F10 pour sauvegarder et quitter. Ensuite appuyez sur la touche

Enter (Entre) pour choisir Yes (Oui).

JBAT1 : Cavalier Clear CMOS (Rinitialisation BIOS) Une mmoire CMOS est intgre et est alimente en externe par une batterie situe sur la carte mre afin de conserver les donnes de configuration systme. Si vous souhaitez nettoyer la configuration systme, placez le cavalier sur Effacer CMOS de manire nettoyer la mmoire CMOS.

Conserver les donnes (dfaut)

Effacer CMOS / Rinitialiser BIOS

Rinitialiser le BIOS aux valeurs par dfaut 1. Eteignez lordinateur et dbranchez le cble dalimentation de la prise lectrique. 2. Utilisez un couvercle de cavalier pour fermer JBAT1 pour environ 5-10 secondes. 3. Enlevez le couvercle de cavalier du JBAT1. 4. Branchez de nouveau le cble dalimentation votre ordinateur et allumez-le.

15Vue densemble des composants Configuration du BIOS

Configuration du BIOS Les rglages par dfaut fournissent une performance optimale pour la stabilit du systme en conditions normales. Veillez toujours garder les rglages par dfaut pour viter dendommager le systme ou tout problme au dmarrage, sauf si vous tes familier avec le BIOS.

Important Le BIOS est constamment mis jour afin doffrir de meilleures performances sys-

tme. Par consquent, la description peut diffrer selon la version de BIOS utilise et nest donc donne qu titre de rfrence. Vous pouvez aussi vous rfrer longlet Help (Aide) pour obtenir la description des fonctions du BIOS.

Les photos ne sont donnes qu titre de rfrence et peuvent varier selon le produit que vous achetez.

Les lments du BIOS peuvent varier selon le processeur.

Entrer dans linterface Setup du BIOS Pendant le dmarrage, lorsquapparat le message Press DEL key to enter Setup Menu, F11 to enter Boot Menu sur lcran, veuillez appuyer sur la touche Suppr.

Touches de fonction F1 : Aide gnrale F4 : Entrer dans le menu de rglages du processeur F5 : Entrer dans le menu Memory-Z F6 : Charger les rglages par dfaut F10 : Sauvegarder les modifications et rglages* F12 : Prendre une capture dcran et la conserver dans le lecteur flash USB (au format FAT / FAT32 uniquement).

* Lorsque vous appuyez sur F10, une fentre de confirmation apparat et fournit linformation de modification. Choisissez entre Oui et Non pour confirmer.

16 Configuration du BIOS

Rinitialiser le BIOS Il se peut que vous ayez besoin de rcuprer les rglages BIOS par dfaut pour rsoudre des problmes. Pour rinitialiser les rglages du BIOS, veuillez suivre lune des mthodes suivantes :

Allez dans le Setup du BIOS et appuyez sur F6 pour charger les rglages par dfaut.

Court-circuitez le cavalier Clear CMOS sur la carte mere.

Important Veuillez vous rfrer la section cavalier Clear CMOS pour en savoir plus sur la rinitialisation du BIOS.

Mettre le BIOS jour Mettre le BIOS jour avec M-FLASH Avant la mise jour : Veuillez tlcharger la dernire version de BIOS compatible votre carte mre sur le site MSI. Ensuite, veuillez sauvegarder le nouveau BIOS sur le lecteur flash USB. Mettre le BIOS jour : 1. Connectez le lecteur Flash USB contenant le profil lordinateur. 2. Appuyez sur la touche Suppr pour entrer dans linterface Setup du BIOS pendant

le processus de POST. 3. Allez dans le BIOS > M-FLASH > Select one file to update BIOS, choisissez un

profil BIOS pour commencer la mise jour du BIOS. 4. Une fois la mise jour termine, le systme redmarrera automatiquement.

Mettre le BIOS jour avec Live Update 6 Avant la mise jour : Assurez-vous que le lecteur LAN est bien install et que lordinateur est correctement connect internet. Mettre le BIOS jour : 1. Installez et lancez MSI LIVE UPDATE 6. 2. Choisissez BIOS Update (Mettre le BIOS jour). 3. Cliquez sur le bouton Scan. 4. Cliquez sur licne Download pour tlcharger et installer la dernire version

du BIOS. 5. Cliquez sur Next (Suivant) et choisissez le mode In Windows. Ensuite, cliquez sur

Next (Suivant) et Start (Commencer) pour lancer la mise jour du BIOS. 6. Une fois la mise jour termine, le systme redmarrera automatiquement.

17Configuration du BIOS Installer OS, Pilotes & Utilitaires

Installer OS, Pilotes & Utilitaires Veuillez vous rfrer au site www.msi.com pour tlcharger et mettre jour les derniers utilitaires et pilotes

Installer Windows 10 1. Allumez lordinateur. 2. Insrez le disque ou la cl USB dinstallation de Windows 10 dans votre

ordinateur. 3. Appuyez sur le bouton Restart du botier de lordinateur. 4. Appuyez sur la touche F11 pendant le POST (Power-On Self Test) du systme

pour entrer dans le menu Boot Menu. 5. Choisissez le disque ou la cl USB dinstallation de Windows 10 dans le menu

de dmarrage. 6. Appuyez sur nimporte quelle touche lorsquapparat le message Press any key

to boot from CD or DVD... 7. Suivez les instructions lcran pour installer Windows 10.

Installer les pilotes 1. Allumez lordinateur sous Windows 10. 2. Insrez le disque MSI Driver Disc dans le lecteur optique. 3. Cliquez sur la fentre popup Select to choose what happens with this disc, puis

choisissez Run DVDSetup.exe pour ouvrir loutil dinstallation. Si vous dsactivez la fonction AutoPlay dans le panneau de configuration Windows, vous pouvez quand mme excuter manuellement DVDSetup.exe partir du chemin daccs depuis la racine du disque de pilotes MSI.

4. Loutil dinstallation trouvera et listera tous les pilotes dont vous avez besoin dans Drivers / Software.

5. Cliquez sur le bouton Install dans le coin infrieur droit de la fentre. 6. Linstallation des pilotes commence. Une fois termine, il vous sera demand de

redmarrer. 7. Cliquez sur le bouton OK pour terminer. 8. Redmarrez votre ordinateur.

18 Installer OS, Pilotes & Utilitaires

Installer les utilitaires Avant dinstaller les utilitaires, il faut complter linstallation des pilotes. 1. Ouvrez loutil dinstallation comme dcrit ci-dessus. 2. Cliquez sur longlet Utilities. 3. Choisissez les utilitaires que vous voulez installer. 4. Cliquez sur le bouton Install dans le coin infrieur droit de la fentre. 5. Linstallation des utilitaires commence. Une fois termine, il vous sera demand

de redmarrer. 6. Cliquez sur le bouton OK pour terminer. 7. Redmarrez votre ordinateur.

1< 1> Inhalt

Inhalt Sicherheitshinweis ..........................................................................................2

Spezifikationen ................................................................................................3

Packungsinhalt ................................................................................................5

Rckseite E/A ..................................................................................................6 LAN Port LED Zustandstabelle ..................................................................................6

bersicht der Komponenten ...........................................................................7 CPU Sockel .................................................................................................................8 DIMM Steckpltze .......................................................................................................9 PCI_E1~2: Erweiterungssteckpltze ..........................................................................9 JFP1, JFP2: Frontpanel-Anschlsse .......................................................................10 SATA1~4: SATA 6Gb/s Anschlsse ...........................................................................10 ATX_PWR1, CPU_PWR1: Stromanschlsse ............................................................11 CPU_FAN1, SYS_FAN1: Stromanschlsse fr PWM Lfter ....................................11 JUSB1, JUSB2: USB 2.0 Anschlsse ........................................................................12 JUSB3: USB 3.2 Gen1 Anschluss .............................................................................12 JAUD1: Audioanschluss des Frontpanels ................................................................13 JCOM1: Serieller Anschluss .....................................................................................13 JTPM1: TPM Anschluss ............................................................................................13 JCI1: Gehusekontaktanschluss ..............................................................................14 JBAT1: Clear CMOS Steckbrcke (Reset des BIOS) ................................................14

BIOS-Setup ....................................................................................................15 ffnen des BIOS Setups ...........................................................................................15 Reset des BIOS .........................................................................................................16 Aktualisierung des BIOS...........................................................................................16

Installation von OS, Treibern und Utilities ....................................................17 Installation von Windows 10 ...................................................................................17 Installation von Treibern ..........................................................................................17 Installation von Utilities ............................................................................................18

Danke, dass Sie sich fr das MSI A320M-A PRO Mother- board entschieden haben. Dieses Handbuch gibt informa- tionen ber Motherboard-Layout, Komponentenbersicht, BIOS-Setup und Softwareinstallation.

2 Sicherheitshinweis

Sicherheitshinweis Die im Paket enthaltene Komponenten sind der Beschdigung durch

elektrostatischen Entladung (ESD). Beachten Sie bitte die folgenden Hinweise, um die erfolgreichen Computermontage sicherzustellen.

Stellen Sie sicher, dass alle Komponenten fest angeschlossen sind. Lockere Steckverbindungen knnen Probleme verursachen, zum Beispiel: Der Computer erkennt eine Komponente nicht oder startet nicht.

Halten Sie das Motherboard nur an den Rndern fest, und verhindern Sie die Berhrung der sensiblen Komponenten.

Um eine Beschdigung der Komponenten durch elektrostatische Entladung (ESD) zu vermeiden, sollten Sie eines elektrostatischen Armbands whrend der Handhabung des Motherboards tragen. Wenn kein elektrostatischen Handgelenkband vorhanden ist, sollten Sie Ihre statische Elektrizitt ableiten, indem Sie ein anderes Metallobjekt berhren, bevor Sie das Motherboard anfassen.

Bewahren Sie das Motherboard in einer elektrostatische Abschirmung oder einem Antistatiktuch auf, wenn das Motherboard nicht installiert ist.

berprfen Sie vor dem Einschalten des Computers, dass sich keine losen Schrauben und andere Bauteile auf dem Motherboard oder im Computergehuse befinden.

Bitte starten Sie den Computer nicht, bevor die Installation abgeschlossen ist. Dies knnte permanente Schden an den Komponenten sowie zu das Verletzung des Benutzers verursachen.

Sollten Sie Hilfe bei der Installation bentigen, wenden Sie sich bitte an einen zertifizierten Computer-Techniker.

Schalten Sie die Stromversorgung aus und ziehen Sie das das Stromkabel ab, bevor Sie jegliche Computer-Komponente ein- und ausbauen.

Bewahren Sie die Bedienungsanleitung als knftige Referenz auf. Halten Sie das Motherboard von Feuchtigkeit fern. Bitte stellen Sie sicher, dass Ihre Netzspannung den Hinweisen auf dem Netzteil

vor Anschluss des Netzteils an die Steckdose entspricht. Verlegen Sie das Netzkabel so, dass niemand versehentlich darauf treten kann.

Stellen Sie nichts auf dem Netzkabel ab. Alle Achtungs- und Warnhinweise auf dem Motherboard mssen befolgt werden. Falls einer der folgenden Umstnde eintritt, lassen Sie bitte das Motherboard von

Kundendienstpersonal prfen: Flssigkeit ist in dem Computer eingedrungen. Das Motherboard wurde Feuchtigkeit ausgesetzt. Das Motherboard funktioniert nicht richtig oder Sie knnen es nicht wie in der

Bedienungsanleitung beschrieben bedienen. Das Motherboard ist heruntergefallen und beschdigt. Das Motherboard weist offensichtlich Zeichen eines Schadens auf.

Nutzen und lagern Sie das Gert nicht an Stellen, an denen Temperaturen von mehr als 60C herrschen - das Motherboard kann in diesem Fall Schaden nehmen.

3Sicherheitshinweis Spezifikationen

Spezifikationen

CPU

Untersttzt die AMD Ryzen der 1., 2. und 3. Generation Prozessoren/ Ryzen Prozessoren mit Radeon Vega Grafikprozessoren und AMD Ryzen der 2. Generation Prozessoren mit Radeon Grafikprozessoren/ Athlon Prozessoren mit Radeon Vega-Grafik-Desktop-Prozessoren und A-Serie Prozessoren/ Athlon X4 Desktop-Prozessoren fr Sockel AM4

Chipsatz AMD A320 Chipsatz

Speicher

2x DDR4 Speicherpltze, aufrstbar bis 32 GB* Untersttzt 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/

3200(OC)+ MHz Dual-Kanal-Speicherarchitektur Untersttzen non-ECC UDIMM-Speicher Untersttzen ECC UDIMM-Speicher (non-ECC Modus)

* Weitere Informationen zu kompatiblen Speicher finden Sie unter: www.msi.com.

Erweiterung- anschlsse

1x PCIe 3.0 x16 Steckplatz Untersttzt x16 Geschwindigkeit mit AMD Ryzen der 1.,

2. und 3. Generation Prozessoren Untersttzt x8 Geschwindigkeit mit Ryzen Prozessoren

mit Radeon Vega Grafikprozessoren und AMD Ryzen der 2. Generation Prozessoren mit Radeon Grafikprozessoren

Untersttzt x4 Geschwindigkeit mit AMD Athlon Prozessoren mit Radeon Vega Grafikprozessoren

1x PCIe 2.0 x1 Steckplatz

Onboard-Grafik

1x DVI-D Anschluss, Untersttzung einer maximalen Auflsung von 1920x1200@60Hz*

1x HDMI 1.4 Anschluss, Untersttzung einer maximalen Auflsung von 4096x2160@30Hz* * Diese Funktion wird nur bei der Verwendung von Ryzen Prozessoren mit Radeon Vega Grafikprozessoren und AMD Ryzen der 2. Generation Prozessoren mit Radeon Grafikprozessoren/ Athlon Prozessoren mit Radeon Vega Grafikprozessoren. * Der maximale gemeinsame Speicher des Prozessors betrgt 2048 MB.

Aufbewahrung AMD A320 Chipsatz

4x SATA 6Gb/s Anschlsse Untersttzt RAID 0, RAID1 und RAID 10

Fortsetzung auf der nchsten Seite

4 Spezifikationen

Fortsetzung der vorherigen Seite

USB

AMD A320 Chipsatz 6x USB 3.2 Gen1 (SuperSpeed USB) (4 Typ-A Anschlsse an

der rckseitigen Anschlussleiste, 2 Anschlsse stehen durch die internen USB Anschlsse zur Verfgung)

6x USB 2.0 (High-speed USB) ports (2 Typ-A Anschlsse an der rckseitigen Anschlussleiste, 4 Anschlsse stehen durch die internen USB Anschlsse zur Verfgung)

Audio Realtek ALC892 Codec 7.1-Kanal-HD-Audio

LAN 1x Realtek 8111H Gigabit LAN Controller

Hintere Ein-/ und Ausgnge

1x PS/2 Tastaturanschluss 1x PS/2 Mausanschluss 1x DVI-D Anschluss 1x HDMI Anschluss 4x USB 3.2 Gen1 Typ-A Anschlsse 1x LAN (RJ45) Anschluss 2x USB 2.0 Typ-A Anschlsse 3x Audiobuchsen

Interne Anschlsse

1x 24-poliger ATX Stromanschluss 1x 4-poliger ATX 12V Stromanschluss 4x SATA 6Gb/s Anschlsse 1x USB 3.2 Gen1 Anschluss (untersttzt zustzliche 2 USB

3.2 Gen1 Anschlsse) 2x USB 2.0 Anschlsse (untersttzt zustzliche 4 USB 2.0

Anschlsse) 1x 4-poliger CPU-Lfter-Anschluss 1x 4-poliger System-Lfter-Anschluss 1x Audioanschluss des Frontpanels 1x Serieller Anschluss 2x Frontpanel-Anschlsse 1x TPM Anschluss 1x Gehusekontaktschalter 1x Clear CMOS Steckbrcke

E/A Anschluss NUVOTON NCT5565 Controller Chip

Fortsetzung auf der nchsten Seite

5Spezifikationen Packungsinhalt

Fortsetzung der vorherigen Seite

Hardware- Monitor

CPU/System Temperaturerfassung CPU/System Geschwindigkeitserfassung CPU/System Lfterdrehzahlregelung

Formfaktor m-ATX Formfaktor 8,9 Zoll x 7,4 Zoll (22,6 cm x 18,7 cm)

BIOS Funktionen

1x 128 Mb Flash UEFI AMI BIOS ACPI 6.1, SM BIOS 2.8 Mehrsprachenuntersttzung

Software

Treiber SUPER CHARGER COMMAND CENTER LIVE UPDATE 6 SMART TOOL X-BOOST CPU-Z MSI GAMING Google Chrome, Google Toolbar, Google Drive Norton Internet Security Lsung

Packungsinhalt berprfen Sie den Packungsinhalt des Mainboards. Die Packung sollte enthalten:

Motherboard Treiber-DVD Schnellinstallationsanleitung Anschlussblende SATA 6G Kabel Gehuse-Aufkleber Produktregistrierungskarte

Wichtig Falls einer der oben aufgefhrten Artikel beschdigt ist oder fehlt, wenden Sie sich bitte an Ihren Hndler.

6 Rckseite E/A

Rckseite E/A

Verbindung/ Aktivitt LED Zustand Bezeichnung Aus Keine Verbindung

Gelb Verbindung

Blinkt Datenaktivitt

Geschwindigkeit LED Zustand Bezeichnung Aus 10 Mbps-Verbindung

Grn 100 Mbps-Verbindung

Orange 1 Gbps-Verbindung

LAN Port LED Zustandstabelle

PS/2 Tastatur

PS/2 Maus LAN

DVI-D USB 2.0

USB 3.2 Gen1

Line-In

Mic In

Line-Out

Audio 7.1-Kanal Konfiguration Um 7.1-Kanal-Audio zu konfigurieren, mssen Sie den Front-Audio-Anschluss mit dem JAUD1 Anschluss verbinden und folgen Sie die untenstehenden Schritten. 1. Klicken Sie auf Realtek HD Audio Manager > Advanced Settings, um das

Dialogfeld zu ffnen.

2. Whlen Sie Mute the rear output device (die rckseitigen Ausgnge stumm schalten) aus, wenn ein Front-Kopfhrer eingesteckt wird.

3. Schlieen Sie Ihre Lautsprecher an die Ausgangsbuchsen auf der Rckseite und am Frontpanel an. Nach dem Anschluss eines Audio-Klinkensteckers erscheint ein Dialogfenster und fragt nach einer Besttigung fr das angeschlossene Gert.

7Rckseite E/A bersicht der Komponenten

bersicht der Komponenten

PCI_E1 JBAT1

PCI_E2

ATX_PWR1

JCOM

JUSB2

JUSB3JUSB1

JCI1

JFP1

SATA4

SATA3

SATA2

SATA1

JFP2JAUD1

JTPM1

CPU Sockel

CPU_PWR1

DIMMA1 DIMMB1

SYS_FAN1

CPU_FAN1

52,00mm*

* Abstand zwischen der Mitte der CPU und dem nchsten DIMM Steckplatz.

8 bersicht der Komponenten

CPU Sockel Installieren Sie bitte die CPU in den CPU Sockel, wie unten aufgezeigt.

1

3

5

4

6

7

8

2

Wichtig Ziehen Sie das Netzkabel ab, bevor Sie die CPU ein- und ausbauen. Bitte bewahren Sie die CPU Schutzkappe nach der Installation des Prozessors auf.

MSI wird RMA (Return Merchandise Authorization) Anfragen nur dann behandeln, wenn die Schutzklappe auf dem CPU-Sockel des Motherboards sitzt.

Wenn Sie die CPU einbauen, denken sie bitte daran einen CPU-Khler zu installie- ren. Ein CPU-Khlkrper ist notwendig, um eine berhitzung zu vermeiden und die Systemstabilitt beizubehalten.

Stellen Sie sicher, dass Ihr Khlkrper eine feste Verbindung mit der CPU herg- estellt hat, bevor Sie Ihr System starten.

berhitzung beschdigt die CPU und das System nachhaltig. Stellen Sie stets eine korrekte Funktionsweise des CPU Khlers sicher, um die CPU vor berhitzung zu schtzen. Stellen Sie sicher, dass eine gleichmige Schicht thermischer Paste oder thermischen Tapes zwischen der CPU und dem Khlkrper vorhanden ist, um die Wrmeableitung zu erhhen.

Verwenden Sie bitte die Installationsanweisung des Khlkrpers/Khlers, falls Sie eine seperate CPU oder einen Khlkrper/ Khler erworben haben.

9bersicht der Komponenten bersicht der Komponenten

DIMM Steckpltze Setzen Sie bitte ein Speichermodul wie untern gezeigt in den DIMM-Steckplatz ein.

1

1 2

3

3

2

Wichtig Aufgrund der Chipsatzressourcennutzung wird die verfgbare Kapazitt des Spe-

ichers kleiner sein als die Gre der installierten Speicherkapazitt. Bitte beachten Sie, dass die maximale Kapazitt eines 32-Bit-Windows-Be-

triebssystem bei 4GB oder weniger liegt. Wenn Sie mehr als 4 GB Speicher auf dem Motherboard einbauen mchten, empfehlen wir deshalb, ein 64-Bit-Windows-Be- triebssystem zu installieren.

PCI_E1~2: Erweiterungssteckpltze

Prozessoren

Steckpltze

AMD Ryzen der 1., 2. und 3. Generation Prozessoren

Ryzen Prozessoren mit Radeon Vega Grafikprozessor/ AMD Ryzen der 2. Generation Prozessoren mit Radeon Grafikprozessor und A-Serie/ Athlon X4

Athlon Prozessoren mit Radeon Vega Grafikprozessor

PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4 PCI_E2 PCIe 2.0 x1 PCIe 2.0 x1 PCIe 2.0 x1

Wichtig Wenn Sie eine groe und schwere Grafikkarte einbauen, bentigen Sie einen

Grafikkarten-Stabilisator (Graphics Card Bolster) der das Gewicht trgt und eine Verformung des Steckplatzes vermeidet.

Achten Sie darauf, dass Sie den Strom abschalten und das Netzkabel aus der Steckdose herausziehen, bevor Sie eine Erweiterungskarte installieren oder ent- fernen. Lesen Sie bitte auch die Dokumentation der Erweiterungskarte, um notwen- dige zustzliche Hardware oder Software-nderungen zu berprfen.

10 bersicht der Komponenten

JFP1, JFP2: Frontpanel-Anschlsse Diese Anschlsse verbinden mit den Schaltern und LEDs auf des Frontpanels.

1

2 10

9 JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED - 5 Reset Switch 6 Power Switch 7 Reset Switch 8 Power Switch 9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

SATA1~4: SATA 6Gb/s Anschlsse Diese Anschlsse basieren auf der Hochgeschwindigkeitsschnittstelle SATA 6Gb/s. Pro Anschluss kann ein SATA Gert angeschlossen werden.

SATA4

SATA2 SATA3 SATA1

Wichtig Knicken Sie das SATA-Kabel nicht in einem 90 Winkel. Datenverlust knnte die

Folge sein. SATA-Kabel haben identische Stecker an beiden Enden. Es wird empfohlen den

flachen Stecker auf dem Motherboard einstecken.

11bersicht der Komponenten bersicht der Komponenten

ATX_PWR1, CPU_PWR1: Stromanschlsse Mit diesen Anschlssen verbinden Sie die ATX Stromstecker.

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V 2 +3.3V 14 -12V 3 Ground 15 Ground 4 +5V 16 PS-ON# 5 Ground 17 Ground 6 +5V 18 Ground 7 Ground 19 Ground 8 PWR OK 20 Res 9 5VSB 21 +5V

10 +12V 22 +5V 11 +12V 23 +5V 12 +3.3V 24 Ground

Wichtig Stellen Sie sicher, dass alle Anschlsse mit den richtigen Anschlssen des Netzteils verbunden sind, um einen stabilen Betrieb der Hauptplatine sicherzustellen.

3 2 1 4 CPU_PWR1

1 Ground 3 +12V

2 Ground 4 +12V

CPU_FAN1, SYS_FAN1: Stromanschlsse fr PWM Lfter Im PWM-Modus bieten die Lfteranschlsse konstante 12V Ausgang und regeln die Lftergeschwindigkeit per Drehzahlsteuersignal. Wenn Sie ein 3-Pin (Non-PWM) Lfter an einen PWM-Modus Lfteranschluss anschlieen, luft der Lfter mit hchster Drehzahl und kann unangenehm laut werden. Sie knnen unter BIOS > Advanced > Hardware Monitor die Lfterdrehzahl ndern.

1

CPU_FAN1/ SYS_FAN1

Pin-Belegung des PWM-Modus

1 Ground 2 +12V

3 Sense 4 Speed Control Signal

12 bersicht der Komponenten

JUSB3: USB 3.2 Gen1 Anschluss Mit diesem Anschluss knnen Sie den USB 3.2 Gen1 Anschluss auf dem Frontpanel verbinden.

1 10

1120

1 Power 11 USB2.0+ 2 USB3_RX_DN 12 USB2.0- 3 USB3_RX_DP 13 Ground 4 Ground 14 USB3_TX_C_DP 5 USB3_TX_C_DN 15 USB3_TX_C_DN 6 USB3_TX_C_DP 16 Ground 7 Ground 17 USB3_RX_DP 8 USB2.0- 18 USB3_RX_DN 9 USB2.0+ 19 Power

10 NC 20 No Pin

Wichtig Bitte beachten Sie, dass Sie die mit Stromfhrende Leitung und Erdleitung bezeichneten Pins korrekt verbinden mssen, ansonsten kann es zu Schden kommen.

JUSB1, JUSB2: USB 2.0 Anschlsse Mit diesen Anschlss knnen Sie die USB 2.0 Anschlsse auf dem Frontpanel verbinden.

1

2 10

9

1 VCC 2 VCC 3 USB0- 4 USB1- 5 USB0+ 6 USB1+ 7 Ground 8 Ground 9 No Pin 10 NC

Wichtig Bitte beachten Sie, dass Sie die mit VCC (Stromfhrende Leitung) und Ground

(Erdleitung) bezeichneten Pins korrekt verbinden mssen, ansonsten kann es zu Schden kommen.

Um das iPad, iPhone und den iPod ber USB-Anschlsse aufzuladen, installieren Sie bitte die MSI SUPER CHARGER Software.

13bersicht der Komponenten bersicht der Komponenten

JAUD1: Audioanschluss des Frontpanels Dieser Anschluss ermglicht den Anschluss von Audiobuchsen eines Frontpanels.

1

2 10

9

1 MIC L 2 Ground 3 MIC R 4 NC 5 Head Phone R 6 MIC Detection 7 SENSE_SEND 8 No Pin 9 Head Phone L 10 Head Phone Detection

JCOM1: Serieller Anschluss Mit diesem Anschluss knnen Sie das optionale serielle Schnittstelle mit dem Einbausatze verbinden.

1

2 10

9

1 DCD 2 SIN 3 SOUT 4 DTR 5 Ground 6 DSR 7 RTS 8 CTS 9 RI 10 No Pin

JTPM1: TPM Anschluss Dieser Anschluss wird fr das TPM Modul (Trusted Platform Module) verwendet. Weitere Informationen ber den Einsatz des optionalen TPM Modules entnehmen Sie bitte dem TPM Plattform Handbuch.

1

2 14

13

1 LPC Clock 2 3V Standby power 3 LPC Reset 4 3.3V Power 5 LPC address & data pin0 6 Serial IRQ 7 LPC address & data pin1 8 5V Power 9 LPC address & data pin2 10 No Pin

11 LPC address & data pin3 12 Ground 13 LPC Frame 14 Ground

14 bersicht der Komponenten

JCI1: Gehusekontaktanschluss Dieser Anschluss wird mit einem Kontaktschalter verbunden.

Normal (Standardwert)

Lse den Gehuseeingriff aus

Gehusekontakt-Detektor verwenden 1. Schlieen Sie den JCI1-Anschluss am Gehusekontakt-Schalter/ Sensor am

Gehuse an. 2. Schlieen Sie die Gehuseabdeckung. 3. Gehen Sie zu BIOS > Security > Chassis Intrusion Configuration. 4. Stellen Sie Chassis Intrusion auf Enabled. 5. Drcken Sie F10 zum Speichern und Beenden und drcken Sie dann die Enter-

Taste, um Ja auszuwhlen. 6. Bei eingeschaltetem Computer wird eine Warnmeldung auf dem Bildschirm

angezeigt, wenn die Gehuseabdeckung wieder geffnet wird.

Gehusekontakt-Warnung zurcksetzen 1. Gehen Sie zu BIOS > Security > Chassis Intrusion Configuration. 2. Stellen Sie Chassis Intrusion auf Reset. 3. Drcken Sie F10 zum Speichern und Beenden und drcken Sie dann die Enter-

Taste, um Ja auszuwhlen.

JBAT1: Clear CMOS Steckbrcke (Reset des BIOS) Der Onboard CMOS Speicher (RAM) wird durch eine externe Spannungsversorgung durch eine Batterie auf dem Motherboard versorgt, um die Daten der Systemkonfiguration zu speichern. Wenn Sie die Systemkonfiguration lschen wollen, mssen Sie die Steckbrcke fr kurze Zeit umsetzen.

Daten beibehalten (Standardwert)

Clear CMOS/ Reset BIOS

Rcksetzen des BIOS auf Standardwerte 1. Schalten Sie den Computer ab und ziehen Sie das Netzkabel ab. 2. Verwenden Sie eine Steckbrcke, um JBAT1 fr 5-10 Sekunden kurzzuschlieen. 3. Entfernen Sie die Steckbrcke von JBAT1. 4. Stecken Sie das Kabel Ihres Computers in die Steckdose hinein und schalten Sie

den Computer ein.

15bersicht der Komponenten BIOS-Setup

BIOS-Setup Die Standardeinstellungen bieten die optimale Leistung fr die Systemstabilitt unter Normalbedingungen. Sie sollten immer die Standardeinstellungen behalten, um mgliche Schden des Systems oder Boot-Fehler zu vermeiden, auer Sie besitzen ausreichende BIOS Kenntnisse.

Wichtig BIOS Funktionen werden fr eine bessere Systemleistung kontinuierlich aktualis-

iert. Deswegen knnen die Beschreibungen leicht von der letzten Fassung des BIOS abweichen und sollten demnach nur als Anhaltspunkte dienen. Fr eine Beschrei- bung der BIOS Funktionen rufen Sie die HELP Informationstafel aus.

Die Bilder .in diesem Kapitel stellen lediglich Referenzen dar und knnen von dem von Ihnen erworbenen Produkt abweichen.

Die BIOS-Funktion variiert je nach dem Prozessor.

ffnen des BIOS Setups Whrend des BOOT-Vorgangs drcken Sie die Taste Delete, wenn die Meldung Press DEL key to enter Setup Menu, F11 to enter Boot Menu erscheint.

Funktionstasten F1: Allgemeine Hilfe F4: ffnen das CPU-Spezifikationen-Men F5: ffnen das Memory-Z-Men F6: Laden der ursprnglichen Setup-Standardwerte F10: Speichern oder Zurcksetzen der nderungen* F12: Machen einen Screenshot und speichern auf einen FAT/FAT32-USB-Laufwerk.

* Beim Drcken der F10 Taste wird das Fenster zum Speichern der Einstellungen angezeigt. Whlen Sie Yes, um die Wahl zu besttigen, oder No, um die derzeitige Einstellung beizubehalten.

16 BIOS-Setup

Reset des BIOS Sie knnen die Werkseinstellung wieder herstellen, um bestimmte Probleme zu lsen. Es gibt verschiedene Mglichkeiten, um das BIOS zurckzusetzen:

ffnen Sie das BIOS und drcken Sie F6, um optimierten Einstellungen zu laden. Schlieen Sie die Clear CMOS Steckbrcke an das Motherboard an.

Wichtig Bitte lesen Sie fr Informationen zum BIOS-Reset im Bereich Clear CMOS Steckbrcke nach.

Aktualisierung des BIOS Aktualisierung des BIOS mit dem M-FLASH-Programm Vorbereitung: Laden Sie bitte die neueste BIOS Version, die dem Motherboard-Modell entspricht, von der offiziellen MSI Website herunter und speichern Sie die BIOS-Datei auf USB- Flash-Laufwerk. BIOS-Aktualisierungsschritte: 1. Schlieen das USB-Flashlaufwerk mit der BIOS-Datei an den Computer. 2. Drcken Sie whrend des POST-Vorgangs die Taste (Entf), um das BIOS zu

ffnen. 3. Gehen Sie zu BIOS > M-FLASH > Select one file to update BIOS. Whlen Sie die

BIOS-Datei zur Durchfhrung des BIOS-Aktualisierungsprozesses aus. 4. Nachdem das Flashen des BIOS vollstndig ist, startet das System automatisch

neu.

Aktualisierung des BIOS mit Live Update 6 Vorbereitung: Stellen Sie sicher, dass zuvor die LAN-Treiber installiert wurden und eine Internetverbindung eingerichtet ist. BIOS-Aktualisierungsschritte: 1. Installieren und starten Sie MSI LIVE UPDATE 6. 2. Whlen Sie BIOS Update aus. 3. Klicken Sie auf die Scan Taste. 4. Klicken Sie auf dieses Download-Icon, um die neueste BIOS-Datei zu laden und

zu installieren. 5. Klicken Sie auf Next (Weiter) und whlen Sie In Windows Mode aus. Und klicken

dann auf Next (Weiter) und Start (Starten), um das BIOS-Update zu starten. 6. Nachdem das Flashen des BIOS vollstndig ist, startet das System automatisch

neu.

17BIOS-Setup Installation von OS, Treibern und Utilities

Installation von OS, Treibern und Utilities Laden Sie die neuesten Treiber und Dienstprogramme von www.msi.com herunter und aktualisieren Sie sie

Installation von Windows 10 1. Schalten Sie den Computer ein. 2. Legen Sie die Windows 10 Disk oder das USB-Flashlaufwerk in das optisches

Laufwerk. 3. Drcken Sie die Taste Restart auf dem Computergehuse. 4. Drcken Sie die F11-Taste whrend des POST-Vorgangs (Power-On Self Test),

um das Bootmenu zu ffnen. 5. Whlen Sie die Windows 10 Disk oder das USB-Flashlaufwerk aus dem

Bootmenu. 6. Wenn eine entsprechende Meldung Press any key to boot from CD or DVD...

angezeigt wird, drcken Sie eine beliebige Taste. 7. Folgen Sie den Anweisungen auf dem Bildschirm, um das Dienstprogramm

Windows 10 zu installieren.

Installation von Treibern 1. Starten Sie Ihren Computer mit Windows 10. 2. Legen Sie die MSI Treiber Disk in das optisches Laufwerk. 3. Klicken Sie auf die Pop-up-Meldung Whlen Sie eine Aktion fr

Wechseldatentrger aus und whlen Sie DVD Setup.exe starten aus, aus, um den Installer zu ffnen. Wenn Sie die AutoPlay-Funktionen in der Windows- Systemsteuerung ausschalten, knnen Sie das Programm DVD Setup.exe im Hauptverzeichnis der MSI Treiber CD auch manuell ausfhren.

4. Der Installer wird findet eine Liste aller bentigten Treiber auf der Treiber/ Software-Registerkarte.

5. Klicken Sie auf Install in der rechten unteren Ecke des Fensters. 6. Die Treiber-Installation luft. Wenn die Installation abgeschlossen ist, werden Sie

dazu aufgefordet, den Computer neu zu starten. 7. Klicken Sie auf OK zum Beenden. 8. Starten Sie Ihren Computer neu.

18 Installation von OS, Treibern und Utilities

Installation von Utilities Bevor Sie Anwendungen installieren, mssen Sie die Treiber-Installation vollstndig beendet haben. 1. ffnen Sie den Installer wie beschrieben. 2. Klicken Sie auf Utilities. 3. Whlen Sie die Dienstprogramme, die installiert werden soll. 4. Klicken Sie die Taste Install in der rechten unteren Ecke des Fensters. 5. Die Utilities-Installation ist im Gange. Wenn die Installation abgeschlossen ist,

werden Sie dazu aufgefordet, den Computer neu zu starten. 6. Klicken Sie zum Beenden auf OK. 7. Starten Sie Ihren Computer neu.

1< 1>

.......................................................2

.......................................................................3

........................................................................................5

/ .........................................................6 LAN .............................................................6

.................................................................7 .................................................................................................8 DIMM ...............................................................................................................9 PCI_E1~2: PCIe .........................................................................9 JFP1, JFP2: ................................................................10 SATA1~4: SATA 6 / ..............................................................................10 ATX_PWR1, CPU_PWR1: ..............................................11 CPU_FAN1, SYS_FAN1: ...................................................11 JUSB1, JUSB2: USB 2.0 ...........................................................................12 JUSB3: USB 3.2 Gen1 ..................................................................................12 JAUD1: ................................................................13 JCOM1: ............................................................13 JTPM1: TPM ...................................................................................13 JCI1: ...............................................................14 JBAT1: CMOS ( BIOS) .........................................14

BIOS .............................................................................................15 BIOS ............................................................................................15 BIOS ...............................................................................................................16 BIOS .....................................................................................................16

, .............................................................17 Windows 10 ...........................................................................................17 ..............................................................................................17 .....................................................................................................17

MSI A320M-A PRO. , BIOS .

2

,

. , , .

, . , .

.

. , , , .

, , .

, .

, . , .

, , .

.

. .

, , .

, . .

, .

:

. .

. . .

60 C (140 F), .

3

AMD Ryzen 1-, 2- 3- / Ryzen Radeon Vega AMD Ryzen 2- Radeon/ Athlon Radeon Vega A- / Athlon X4 AM4

AMD A320

2x DDR4, 32* 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/

3200(OC)+ non-ECC UDIMM ECC UDIMM ( non-ECC)

* , www.msi.com .

1x PCIe 3.0 x16 AMD Ryzen 1-, 2- 3-

x16 Ryzen Radeon Vega

AMD Ryzen 2- Radeon x8

AMD Athlon Radeon Vega x4

1x PCIe 2.0 x1

1x DVI-D, 1920x1200@60*

1x HDMI 1.4, 4096x2160@30* * AMD Ryzen Radeon Vega AMD Ryzen 2- Radeon/ Athlon Radeon Vega * - 2048

AMD A320 4x SATA 6 / RAID 0, RAID 1 RAID 10

4

USB

AMD A320 6x USB 3.2 Gen1 (SuperSpeed USB) (4 Type-A

, 2 )

6x USB 2.0 (High-speed USB) (2 Type-A , 4 )

Realtek ALC892 Codec 7.1- High Definition Audio

LAN 1x Realtek 8111H

1x PS/2 1x PS/2 1x DVI-D 1x HDMI 4x USB 3.2 Gen1 Type-A 1x LAN (RJ45) 2x USB 2.0 Type-A 3x

1x 24- ATX 1x 4- ATX 12 4x SATA 6/ 1x USB 3.2 Gen1 ( 2-

USB 3.2 Gen1) 2x USB 2.0 ( 4-

USB 2.0) 1x 4- 1x 4- 1x 1x 2x 1x TPM 1x 1x CMOS

- NUVOTON NCT5565

5

CPU/ CPU/ CPU/

- m-ATX - 8.9 x 7.4 (22.6 x 18.7 )

BIOS

1x 128 UEFI AMI BIOS ACPI 6.1 , SM BIOS 2.8

SUPER CHARGER COMMAND CENTER LIVE UPDATE 6 SMART TOOL X-BOOST CPU-Z MSI GAMING Google Chrome, Google Toolbar, Google Drive Norton Internet Security Solution

. :

SATA 6/

! - , , .

6 /

/

/ .

. 10 /

100 /

1 /

LAN

PS/2

PS/2 LAN

DVI-D USB 2.0

USB 3.2 Gen1

Audio 7.1- 7.1 JAUD1. . 1. Realtek HD Audio Manager > Advanced Settings,

, .

2. Mute the rear output device, when a front headphone plugged in. 3. .

.

7 /

PCI_E1 JBAT1

PCI_E2

ATX_PWR1

JCOM

JUSB2

JUSB3JUSB1

JCI1

JFP1

SATA4

SATA3

SATA2

SATA1

JFP2JAUD1

JTPM1

CPU_PWR1

DIMMA1 DIMMB1

SYS_FAN1

CPU_FAN1

52.00*

* DIMM.

8

, , .

1

3

5

4

6

7

8

2

! ,

. ,

. , , MSI , .

. , , .

.

. . ( ) .

, . .

9

DIMM , DIMM, .

1

1 2

3

3

2

! ,

, . , ,

32- Windows, 4 . 4 , 64- Windows.

PCI_E1~2: PCIe

AMD Ryzen 1-, 2- 3-

Ryzen Radeon Vega/ AMD Ryzen 2- Radeon A-/ Athlon X4

Athlon Radeon Vega

PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4 PCI_E2 PCIe 2.0 x1 PCIe 2.0 x1 PCIe 2.0 x1

! ,

, MSI Gaming Series Graphics Card Bolster .

, . .

10

JFP1, JFP2: , .

1

2 10

9 JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED - 5 Reset Switch 6 Power Switch 7 Reset Switch 8 Power Switch 9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

SATA1~4: SATA 6 / SATA 6 /. SATA.

SATA4

SATA2 SATA3 SATA1

! SATA . ,

. SATA . ,

.

11

ATX_PWR1, CPU_PWR1: ATX.

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V 2 +3.3V 14 -12V 3 Ground 15 Ground 4 +5V 16 PS-ON# 5 Ground 17 Ground 6 +5V 18 Ground 7 Ground 19 Ground 8 PWR OK 20 Res 9 5VSB 21 +5V

10 +12V 22 +5V 11 +12V 23 +5V 12 +3.3V 24 Ground

! .

3 2 1 4 CPU_PWR1

1 Ground 3 +12V

2 Ground 4 +12V

CPU_FAN1, SYS_FAN1: PWM 12, . 3- (Non-PWM) PWM, . . BIOS > Advanced > Hardware Monitor.

1

CPU_FAN1/ SYS_FAN1

PWM

1 Ground 2 +12V

3 Sense 4 Speed Control Signal

12

JUSB3: USB 3.2 Gen1 USB 3.1 Gen1 .

1 10

1120

1 Power 11 USB2.0+ 2 USB3_RX_DN 12 USB2.0- 3 USB3_RX_DP 13 Ground 4 Ground 14 USB3_TX_C_DP 5 USB3_TX_C_DN 15 USB3_TX_C_DN 6 USB3_TX_C_DP 16 Ground 7 Ground 17 USB3_RX_DP 8 USB2.0- 18 USB3_RX_DN 9 USB2.0+ 19 Power

10 NC 20 No Pin

! , , .

JUSB1, JUSB2: USB 2.0 USB 2.0 .

1

2 10

9

1 VCC 2 VCC 3 USB0- 4 USB1- 5 USB0+ 6 USB1+ 7 Ground 8 Ground 9 No Pin 10 NC

! , ,

VCC . , iPad, iPhone iPod USB, ,

MSI SUPER CHARGER.

13

JAUD1: .

1

2 10

9

1 MIC L 2 Ground 3 MIC R 4 NC 5 Head Phone R 6 MIC Detection 7 SENSE_SEND 8 No Pin 9 Head Phone L 10 Head Phone Detection

JCOM1: , .

1

2 10

9

1 DCD 2 SIN 3 SOUT 4 DTR 5 Ground 6 DSR 7 RTS 8 CTS 9 RI 10 No Pin

JTPM1: TPM (Trusted Platform Module). . .

1

2 14

13

1 LPC Clock 2 3V Standby power 3 LPC Reset 4 3.3V Power 5 LPC address & data pin0 6 Serial IRQ 7 LPC address & data pin1 8 5V Power 9 LPC address & data pin2 10 No Pin

11 LPC address & data pin3 12 Ground 13 LPC Frame 14 Ground

14

JCI1: .

( )

1. JCI1. 2. . 3. BIOS > Security > Chassis Intrusion Configuration. 4. Chassis Intrusion to Enabled. 5. F10, ,

Enter, Yes. 6.

.

1. BIOS > Security > Chassis Intrusion Configuration. 2. Chassis Intrusion Reset. 3. F10, ,

Enter, Yes.

JBAT1: CMOS ( BIOS) CMOS . ( CMOS ), .

( )

/ BIOS

BIOS 1. . 2. , JBAT1

5-10 . 3. JBAT1. 4. .

15 BIOS

BIOS . BIOS, . , .

! , BIOS .

BIOS . BIOS, HELP.

.

BIOS .

BIOS Delete, Press DEL key to enter Setup Menu, F11 to enter Boot Menu .

F1: F4: F5: Memory-Z F6: F10: * F12: USB - ( FAT / FAT32 ).

* F10 . Yes No, .

16 BIOS

BIOS BIOS . :

BIOS F6 .

CMOS .

! BIOS, CMOS.

BIOS BIOS M-FLASH : , BIOS MSI, . BIOS - USB. BIOS: 1. - USB, . 2. Del BIOS POST. 3. BIOS > M-FLASH > Select one file to update BIOS

BIOS BIOS. 4. ,

.

BIOS Live Update 6 : , . BIOS: 1. MSI LIVE UPDATE 6. 2. BIOS Update. 3. Scan. 4. Download,

BIOS. 5. Next In Windows mode.

Next Start BIOS. 6. ,

.

17 BIOS ,

, C : www.msi.com.

Windows 10 1. . 2. Windows 10

USB USB -, Windows 10.

3. Restart . 4. F11 POST (Power-On Self Test) ,

. 5. / USB - . 6. , Press any

key to boot from CD or DVD... 7. , Windows 10.

1. Windows 10. 2. MSI Driver Disc . 3. Select to choose what happens with this disc

Run DVDSetup.exe, . Windows , DVDSetup.exe MSI Driver Disc.

4. Drivers/Software.

5. Install . 6. .

. 7. OK . 8. .

. 1. , . 2. Utilities. 3. . 4. Install . 5. .

. 6. OK . 7. .

18 ,

1< 1>

...........................................................................................................2

..................................................................................................................3

...........................................................................................................5

I/O ....................................................................................................6 LAN LED .................................................................................................6

...........................................................................................................7 CPU .....................................................................................................................8 DIMM ..................................................................................................................9 PCI_E1~2: PCIe ...........................................................................................9 JFP1, JFP2: ........................................................................................10 SATA1~4: SATA 6Gb/s ......................................................................................10 ATX_PWR1, CPU_PWR1: ..........................................................................11 CPU_FAN1, SYS_FAN1: PWM ...................................................................11 JUSB1, JUSB2: USB 2.0 ...................................................................................12 JUSB3: USB 3.2 Gen1 .......................................................................................12 JAUD1: ...............................................................................................13 JCOM1: ..............................................................................................13 JTPM1: TPM ..............................................................................................13 JCI1: ...........................................................................................14 JBAT1: CMOS ( BIOS) ........................................................................14

BIOS .......................................................................................................15 BIOS ..........................................................................................................15 BIOS ..................................................................................................................16 BIOS ..................................................................................................................16

.............................................................17 Windows 10 .....................................................................................................17 ...................................................................................................................17 ...................................................................................................................17

MSI A320M-A PRO BIOS

2

(ESD)

(ESD) ESD

60 ( 140 )

3

CPU AM4 AMD / Radeon Vega Graphics Radeon Graphics AMD / Radeon Vega Graphics Athlon A-series / Athlon X4

AMD A320

2 DDR4 32GB* 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/ 3200(OC)+

MHz

-ECC UDIMM ECC UDIMM (-ECC )

* www.msi.com

1 PCIe 3.0 x16 AMD x16 Radeon Vega Graphics Radeon

Graphics AMD x8 Radeon Vega Graphics AMD Athlon

x4 1 PCIe 2.0 x1

1 DVI-D 1920x1200@60Hz* 1 HDMI 1.4 4096x2160@30Hz*

* Radeon Vega Graphics AMD Radeon Graphics AMD / Radeon Vega Graphics Athlon * 2048 MB

AMD A320

4 SATA 6Gb/s RAID 0RAID1 RAID 10

4

USB

AMD A320 6 USB 3.2 Gen1 (SuperSpeed USB) (4 Type-A

2 ) 6 USB 2.0 (High-speed USB) (2 Type-A

4 )

Realtek ALC892 7.1-

LAN 1 Realtek 8111H

1 PS/2 1 PS/2 1 DVI-D 1 HDMI 4 USB 3.2 Gen1 Type-A 1 LAN (RJ45) 2 USB 2.0 Type-A 3

1 24-pin ATX 1 4-pin ATX 12V 4 SATA 6Gb/s 1 USB 3.2 Gen1 ( 2 USB 3.2 Gen1 ) 2 USB 2.0 ( 4 USB 2.0 ) 1 4-pin CPU 1 4-pin 1 1 2 1 TPM 1 1 CMOS

I/O NUVOTON NCT5565

5

CPU/ CPU/ CPU/

m-ATX 8.9 x 7.4 (22.6 x 18.7 )

BIOS

1 128 Mb flash UEFI AMI BIOS ACPI 6.1 , SM BIOS 2.8

COMMAND CENTER LIVE UPDATE 6 MSI GAMING CPU-Z Google Google Google

DVD I/O SATA 6G

6 I/O

I/O

/

10 Mbps

100 Mbps

1 Gbps

LAN LED

PS/2

PS/2 LAN

DVI-D USB 2.0

USB 3.2 Gen1

7.1- 7.1 I/O JAUD1 1. Realtek HD Audio Manager > Advanced Settings

2. Mute the rear output device, when a front headphone plugged in

3. I/O

7 I/O

PCI_E1 JBAT1

PCI_E2

ATX_PWR1

JCOM

JUSB2

JUSB3JUSB1

JCI1

JFP1

SATA4

SATA3

SATA2

SATA1

JFP2JAUD1

JTPM1

CPU

CPU_PWR1

DIMMA1 DIMMB1

SYS_FAN1

CPU_FAN1

52.00*

* CPU DIMM

8

CPU CPU CPU

1

3

5

4

6

7

8

2

CPU CPU (RMA)

CPU CPU CPU CPU

CPU CPU CPU

CPU CPU ( )

CPU / /

9

DIMM DIMM

1

1 2

3

3

2

32 Windows

4GB 4GB 64 Windows

PCI_E1~2: PCIe

MSI

AMD

Radeon Vega Graphics / Radeon Graphics AMD A-series/ Athlon X4

Radeon Vega Graphics Athlon

PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4 PCI_E2 PCIe 2.0 x1 PCIe 2.0 x1 PCIe 2.0 x1

10

SATA1~4: SATA 6Gb/s SATA 6Gb/s SATA

SATA4

SATA2 SATA3 SATA1

SATA 90 SATA

JFP1, JFP2: LED

1

2 10

9 JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED - 5 Reset Switch 6 Power Switch 7 Reset Switch 8 Power Switch 9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

11

ATX_PWR1, CPU_PWR1: ATX

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V 2 +3.3V 14 -12V 3 Ground 15 Ground 4 +5V 16 PS-ON# 5 Ground 17 Ground 6 +5V 18 Ground 7 Ground 19 Ground 8 PWR OK 20 Res 9 5VSB 21 +5V

10 +12V 22 +5V 11 +12V 23 +5V 12 +3.3V 24 Ground

ATX

3 2 1 4 CPU_PWR1

1 Ground 3 +12V

2 Ground 4 +12V

CPU_FAN1, SYS_FAN1: PWM 12V 3 (-PWM) PWM 100% BIOS > Advanced > Hardware Monitor

1

CPU_FAN1/ SYS_FAN1

PWM

1 Ground 2 +12V

3 Sense 4 Speed Control Signal

12

JUSB3: USB 3.2 Gen1 USB 3.2 Gen1

1 10

1120

1 Power 11 USB2.0+ 2 USB3_RX_DN 12 USB2.0- 3 USB3_RX_DP 13 Ground 4 Ground 14 USB3_TX_C_DP 5 USB3_TX_C_DN 15 USB3_TX_C_DN 6 USB3_TX_C_DP 16 Ground 7 Ground 17 USB3_RX_DP 8 USB2.0- 18 USB3_RX_DN 9 USB2.0+ 19 Power

10 NC 20 No Pin

JUSB1, JUSB2: USB 2.0 USB 2.0

1

2 10

9

1 VCC 2 VCC 3 USB0- 4 USB1- 5 USB0+ 6 USB1+ 7 Ground 8 Ground 9 No Pin 10 NC

VCC iPadiPhone iPod USB MSI SUPER

CHARGER

13

JAUD1:

1

2 10

9

1 MIC L 2 Ground 3 MIC R 4 NC 5 Head Phone R 6 MIC Detection 7 SENSE_SEND 8 No Pin 9 Head Phone L 10 Head Phone Detection

JCOM1:

1

2 10

9

1 DCD 2 SIN 3 SOUT 4 DTR 5 Ground 6 DSR 7 RTS 8 CTS 9 RI 10 No Pin

JTPM1: TPM TPM () TPM

1

2 14

13

1 LPC Clock 2 3V Standby power 3 LPC Reset 4 3.3V Power 5 LPC address & data pin0 6 Serial IRQ 7 LPC address & data pin1 8 5V Power 9 LPC address & data pin2 10 No Pin

11 LPC address & data pin3 12 Ground 13 LPC Frame 14 Ground

14

JBAT1: CMOS ( BIOS) CMOS CMOS

()

CMOS/ BIOS

BIOS 1. 2. JBAT1 5-10 3. JBAT1 4.

JCI1:

()

1. JCI1 / 2. 3. BIOS > Security > Chassis Intrusion Configuration 4. Chassis Intrusion Enabled 5. F10 Enter Yes 6.

1. BIOS > Security > Chassis Intrusion Configuration 2. Chassis Intrusion Reset 3. F10 Enter Yes

15 BIOS

BIOS BIOS

BIOS

BIOS BIOS

BIOS Press DEL key to enter Setup Menu, F11 to enter Boot Menu Delete

F1: F4: CPU F5: Memory-Z F6: F10: * F12: U (FAT/ FAT32 )

* F10 Yes No

16 BIOS

BIOS BIOS BIOS

BIOS F6 CMOS

CMOS BIOS

BIOS M-FLASH BIOS MSI BIOS BIOS U BIOS 1. U 2. POST Del BIOS 3. BIOS > M-FLASH > Select one file to update BIOS BIOS

BIOS 4. 100%

Live Update 6 BIOS LAN BIOS 1. MSI LIVE UPDATE 6 2. BIOS Update 3. Scan 4. Download BIOS 5. Next In Windows mode Next Start BIOS 6. 100%

17BIOS

www.msi.com

Windows 10 1. 2. Windows 10 / USB 3. Restart 4. POST () F11 5. Windows 10 /USB 6. Press any key to boot from CD or DVD... 7. Windows 10

1. Windows 10 2. MSI 3. Select to choose what happens with this disc Run

DVDSetup.exe Windows AutoPlay MSI DVDSetup.exe

4. Drivers/Software 5. Install 6. 7. OK 8.

1. 2. Utilities 3. 4. Install 5. 6. OK 7.

18

1< 1>

...........................................................................................................2

..................................................................................................................3

.......................................................................................................5

I/O ............................................................................................................6 LED ..........................................................................................6

...........................................................................................................7 CPU .....................................................................................................................8 ..................................................................................................................9 PCI_E1~2: PCIe ...........................................................................................9 JFP1, JFP2: ........................................................................................10 SATA1~4: SATA 6Gb/s ......................................................................................10 ATX_PWR1, CPU_PWR1: ..........................................................................11 CPU_FAN1, SYS_FAN1: PWM ...........................................................11 JUSB1, JUSB2: USB 2.0 ...................................................................................12 JUSB3: USB 3.2 Gen1 .......................................................................................12 JAUD1: ................................................................................................13 JCOM1: ..................................................................................................13 JTPM1: TPM ..............................................................................................13 JCI1: ...................................................................................................14 JBAT1: CMOS ( BIOS) ...............................................................14

BIOS .......................................................................................................15 BIOS ..........................................................................................................15 BIOS ..................................................................................................................16 BIOS ..................................................................................................................16

.............................................................17 Windows 10 .....................................................................................................17 ............................................................................................................17 ............................................................................................................17

MSI A320M-A PRO BIOS

2

(ESD)

60C (140F)

3

AM4 AMD Ryzen/ Radeon Vega Ryzen/ Radeon AMD Ryzen / Radeon Vega Athlon/ A- / Athlon X4

AMD A320

2 DDR4 32GB* 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/ 3200(OC)+

MHz non-ECC UDIMM ECC UDIMM (-ECC )

* www.msi.com

1 PCIe 3.0 x16 AMD Ryzen x16 Radeon Vega Ryzen /

Radeon AMD Ryzen x8

Radeon Vega AMD Athlon x4

1 PCIe 2.0 x1

1 DVI-D 1920x1200 @60Hz* 1 HDMI 1.4 4096x2160@30Hz*

* Radeon Vega Ryzen / Radeon AMD Ryzen / Radeon Vega Athlon * 2048 MB

AMD A320

4 SATA 6Gb/s RAID 0RAID 1 RAID 10

4

USB

AMD A320 6 USB 3.2 Gen1 (SuperSpeed USB) (4 Type-A

2 ) 6 USB 2.0 (High-speed USB) (2 Type-A

4 )

Realtek ALC892 7.1

1 Realtek 8111H Gigabit

1 PS/2 1 PS/2 1 DVI-D 1 HDMI 4 USB 3.2 Gen1 Type-A 1 LAN (RJ45) 2 USB 2.0 Type-A 3

1 24-pin ATX 12V 1 4-pin ATX 12V 4 SATA 6Gb/s 1 USB 3.2 Gen1 ( 2 USB 3.2 Gen1 ) 2 USB 2.0 ( 4 USB 2.0 ) 1 4-pin CPU 1 4-pin 1 1 2 1 TPM 1 1 CMOS

I/O NUVOTON NCT5565

5

CPU/ CPU/ CPU/

m-ATX 8.9 x 7.4 (22.6 x 18.7 )

BIOS

1 128 Mb flash UEFI AMI BIOS ACPI 6.1, SM BIOS 2.8

SUPER CHARGER COMMAND CENTER LIVE UPDATE 6 SMART TOOL X-BOOST CPU-Z MSI GAMING Google ChromeGoogle Google Norton Internet Security Solution

DVD I/O SATA 6G

6 I/O

I/O

/

10 Mbps

100 Mbps

1 Gbps

LED

PS/2

PS/2

DVI-D USB 2.0

USB 3.2 Gen1

7.1 7.1 I/O JAUD1 1. Realtek HD Audio Manager > Advanced Settings

2. 3. I/O

7 I/O

PCI_E1 JBAT1

PCI_E2

ATX_PWR1

JCOM

JUSB2

JUSB3JUSB1

JCI1

JFP1

SATA4

SATA3

SATA2

SATA1

JFP2JAUD1

JTPM1

CPU

CPU_PWR1

DIMMA1 DIMMB1

SYS_FAN1

CPU_FAN1

52.00mm*

* CPU DIMM

8

CPU CPU CPU

1

3

5

4

6

7

8

2

CPU CPU

Return Merchandise Authorization (RMA)

CPU CPU

CPU CPU CPU CPU

/ /

9

DIMM

1

1 2

3

3

2

32 Windows

4GB 4GB 64 Windows

PCI_E1~2: PCIe

AMD Ryzen

Radeon Vega Ryzen/ Radeon AMD Ryzen / A- / Athlon X4

Radeon Vega Athlon

PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4 PCI_E2 PCIe 2.0 x1 PCIe 2.0 x1 PCIe 2.0 x1

MSI Gaming Series

10

JFP1, JFP2: LED

1

2 10

9 JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED - 5 Reset Switch 6 Power Switch 7 Reset Switch 8 Power Switch 9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

SATA1~4: SATA 6Gb/s SATA 6Gb/s SATA

SATA4

SATA2 SATA3 SATA1

SATA 90 SATA

11

ATX_PWR1, CPU_PWR1: ATX

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V 2 +3.3V 14 -12V 3 Ground 15 Ground 4 +5V 16 PS-ON# 5 Ground 17 Ground 6 +5V 18 Ground 7 Ground 19 Ground 8 PWR OK 20 Res 9 5VSB 21 +5V

10 +12V 22 +5V 11 +12V 23 +5V 12 +3.3V 24 Ground

ATX

3 2 1 4 CPU_PWR1

1 Ground 3 +12V

2 Ground 4 +12V

CPU_FAN1, SYS_FAN1: PWM PWM 12V 3 ( PWM) PWM 100% BIOS > Advanced > Hardware Monitor

1

CPU_FAN1/ SYS_FAN1

PWM

1 Ground 2 +12V

3 Sense 4 Speed Control Signal

12

JUSB3: USB 3.2 Gen1 USB 3.2 Gen1

1 10

1120

1 Power 11 USB2.0+ 2 USB3_RX_DN 12 USB2.0- 3 USB3_RX_DP 13 Ground 4 Ground 14 USB3_TX_C_DP 5 USB3_TX_C_DN 15 USB3_TX_C_DN 6 USB3_TX_C_DP 16 Ground 7 Ground 17 USB3_RX_DP 8 USB2.0- 18 USB3_RX_DN 9 USB2.0+ 19 Power

10 NC 20 No Pin

JUSB1, JUSB2: USB 2.0 USB 2.0

1

2 10

9

1 VCC 2 VCC 3 USB0- 4 USB1- 5 USB0+ 6 USB1+ 7 Ground 8 Ground 9 No Pin 10 NC

VCC USB iPadiPhone iPod MSI SUPER CHARGER

13

JAUD1:

1

2 10

9

1 MIC L 2 Ground 3 MIC R 4 NC 5 Head Phone R 6 MIC Detection 7 SENSE_SEND 8 No Pin 9 Head Phone L 10 Head Phone Detection

JCOM1:

1

2 10

9

1 DCD 2 SIN 3 SOUT 4 DTR 5 Ground 6 DSR 7 RTS 8 CTS 9 RI 10 No Pin

JTPM1: TPM (TPM) TPM

1

2 14

13

1 LPC Clock 2 3V Standby power 3 LPC Reset 4 3.3V Power 5 LPC address & data pin0 6 Serial IRQ 7 LPC address & data pin1 8 5V Power 9 LPC address & data pin2 10 No Pin

11 LPC address & data pin3 12 Ground 13 LPC Frame 14 Ground

14

JCI1:

()

1. JCI1 2. 3. BIOS > Security > Chassis Intrusion Configuration 4. Chassis Intrusion Enabled 5. F10 Enter Yes 6.

1. BIOS > Security > Chassis Intrusion Configuration 2. Chassis Intrusion Reset. 3. F10 Enter Yes

JBAT1: CMOS ( BIOS) CMOS CMOS

()

CMOS/ BIOS

BIOS 1. 2. JBAT1 5-10 3. JBAT1 4.

15 BIOS

BIOS BIOS

BIOS BIOS

HELP BIOS BIOS

BIOS DEL F11 Boot Menu Delete

F1: F4: CPU F5: Memory-Z F6: F10: * F12: USB FAT/ FAT32

* F10

16 BIOS

BIOS BIOS BIOS

BIOS F6 CMOS

CMOS BIOS

BIOS M-FLASH BIOS MSI BIOS BIOS USB BIOS 1. USB 2. POST Del BIOS 3. BIOS > M-FLASH > Select one file to update BIOS BIOS

BIOS 4. 100%

Live Update 6 BIOS BIOS 1. MSI LIVE UPDATE 6 2. BIOS Update (BIOS ) 3. Scan () 4. Download () BIOS 5. Next () In Windows mode Next () Start

() BIOS 6. 100%

17BIOS

www.msi.com

Windows 10 1. 2. Windows10 3. 4. (POST) F11 5. Windows 10 / USB 6. Press any key to boot from CD or DVD... 7. Windows 10

1. Windows 10 2. MSI 3. DVDSetup.exe

Windows MSI DVDSetup.exe

4. / 5. 6. 7. 8.

1. 2. 3. 4. 5. 6. 7.

18

1< 1>

.....................................................................................2

..................................................................................................................3

.............................................................................................5

I/O ...................................................................................................6 LANLED .................................................................................................6

......................................................................................7 CPU .................................................................................................................8 DIMM ..............................................................................................................9 PCI_E1~2: PCIe .......................................................................................9 JFP1JFP2: .....................................................................10 SATA1~4: SATA 6Gb/s .............................................................................10 ATX_PWR1CPU_PWR1: .................................................................11 CPU_FAN1SYS_FAN1: PWM ........................................................11 JUSB1JUSB2: USB 2.0 ..........................................................................12 JUSB3: USB 3.2 Gen1 ..............................................................................12 JAUD1: .......................................................................13 JCOM1: ............................................................................13 JTPM1: TPM............................................................................13 JCI1: .........................................................................14 JBAT1: CMOS (BIOS) ............................................................14

BIOS ....................................................................................................15 BIOS .....................................................................................15 BIOS ..........................................................................................................16 BIOS ...........................................................................................16

OS ......................................17 Windows 10 ......................................................................................17 ..........................................................................................17 .....................................................................................17

MSI A320M-A PRO BIOS

2

(ESD)PC

(ESD)

ESD

PC

PC PC

PCPC

PC

60OC (140OF)

3

CPU AM4 1/2/3AMD Ryzen/ Radeon Vega RyzenRadeon2 AMD Ryzen/ Radeon VegaAthlon A-series / Athlon X4

AMD A320

DDR4232GB* 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/ 3200(OC)+ MHz

Non-ECC UDIMM ECC UDIMM (non-ECC)

* www.msi.com

PCIe 3.0 x16 x1 AMD Ryzen1/2/3 x16 Radeon VegaAMD Ryzen

/Radeon2AMD Ryzen x8

Radeon VegaAMD Athlon x4

PCIe 2.0 x1 x1

DVI-D x11920x1200@60Hz *

HDMI 1.4 x14096x2160@30Hz* * Radeon VegaRyzen/ Radeon 2AMD Ryzen/Radeon Vega Athlon * 2048 MB

AMD A320

SATA 6Gb/s x4 RAID 0RAID 1RAID 10

USB

AMD A320 USB 3.2 Gen1 x6 (4 Type-A

2) USB 2.0 (High-speed USB) x6 (2 Type-A

4)

4

Realtek ALC892 7.1HD

LAN Realtek 8111H Gigabit LAN x1

PS/2 x1 PS/2 x1 DVI-D x1 HDMI x1 USB 3.2 Gen1 Type-A x4 LAN (RJ45) x1 USB 2.0 Type-A x2 x3

24ATX x1 4ATX 12V x1 SATA 6Gb/s x4 USB 3.2 Gen1 x1 (2USB 3.2 Gen1

) USB 2.0 x2 (4USB 2.0) 4CPU x1 4 x1 x1 x1 x2 TPM x1 x1 CMOS x1

I/O NUVOTON NCT5565

CPU/ CPU/ CPU/

m-ATX 8.9 in. x 7.4 in. (22.6 cm x 18.7 cm)

5

BIOS

128 Mb x1 UEFI AMI BIOS ACPI 6.1 , SM BIOS 2.8

SUPER CHARGER COMMAND CENTER LIVE UPDATE 6 SMART TOOL X-BOOST CPU-Z MSI GAMING Google Chrome, Google Toolbar, Google Drive Norton Internet Security Solution

DVD I/O SATA 6G

6 I/O

I/O

/ LED

Off

LED

Off 10 Mbps

100 Mbps

1 Gbps

LANLED

PS/2

PS/2 LAN

DVI-D USB 2.0

USB 3.2 Gen1

7.1 7.1I/O JAUD1 1. Realtek HD Audio Manager > Advanced Settings

2. Mute the rear output device, when a front headphone plugged in ( )

3. I/O

7I/O

PCI_E1 JBAT1

PCI_E2

ATX_PWR1

JCOM

JUSB2

JUSB3JUSB1

JCI1

JFP1

SATA4

SATA3

SATA2

SATA1

JFP2JAUD1

JTPM1

CPU

CPU_PWR1

DIMMA1 DIMMB1

SYS_FAN1

CPU_FAN1

52.00mm*

* CPUDIMM

8 I/O

CPU CPUCPU

1

3

5

4

6

7

8

2

CPU

CPUCPUCPU

CPUCPU

CPUCPUCPU

CPUCPU

CPUCPU CPU CPUCPU

CPUCPUCPU

9I/O I/O

DIMM DIMM

1

1 2

3

3

2

32bitWindows OS4GB

4GB64bit Windows OS

PCI_E1~2: PCIe

MSI Gaming Series Graphics Card Bolster

1/2/3 AMD Ryzen

Radeon Vega RyzenRadeon 2 AMD RyzenA-series/ Athlon X4

Radeon Vega AMD Athlon

PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4 PCI_E2 PCIe 2.0 x1 PCIe 2.0 x1 PCIe 2.0 x1

10 I/O

JFP1JFP2: LED

1

2 10

9 JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED - 5 Reset Switch 6 Power Switch 7 Reset Switch 8 Power Switch 9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

SATA1~4: SATA 6Gb/s SATA 6Gb/s SATA

SATA4

SATA2 SATA3 SATA1

SATA90

SATA

11I/O I/O

ATX_PWR1CPU_PWR1: ATX

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V 2 +3.3V 14 -12V 3 Ground 15 Ground 4 +5V 16 PS-ON# 5 Ground 17 Ground 6 +5V 18 Ground 7 Ground 19 Ground 8 PWR OK 20 Res 9 5VSB 21 +5V

10 +12V 22 +5V 11 +12V 23 +5V 12 +3.3V 24 Ground

ATX

3 2 1 4 CPU_PWR1

1 Ground 3 +12V

2 Ground 4 +12V

CPU_FAN1SYS_FAN1: PWM PWM12V 3 (Non-PWM)PWM 100% BIOS > Advanced > Hardware Monitor

1

CPU_FAN1/ SYS_FAN1

PWM

1 Ground 2 +12V

3 Sense 4 Speed Control Signal

12 I/O

JUSB3: USB 3.2 Gen1 USB 3.2 Gen1

1 10

1120

1 Power 11 USB2.0+ 2 USB3_RX_DN 12 USB2.0- 3 USB3_RX_DP 13 Ground 4 Ground 14 USB3_TX_C_DP 5 USB3_TX_C_DN 15 USB3_TX_C_DN 6 USB3_TX_C_DP 16 Ground 7 Ground 17 USB3_RX_DP 8 USB2.0- 18 USB3_RX_DN 9 USB2.0+ 19 Power

10 NC 20 No Pin

JUSB1JUSB2: USB 2.0 USB 2.0

1

2 10

9

1 VCC 2 VCC 3 USB0- 4 USB1- 5 USB0+ 6 USB1+ 7 Ground 8 Ground 9 No Pin 10 NC

VCC

USBiPadiPhoneiPod MSI SUPER CHARGER

13I/O I/O

JAUD1:

1

2 10

9

1 MIC L 2 Ground 3 MIC R 4 NC 5 Head Phone R 6 MIC Detection 7 SENSE_SEND 8 No Pin 9 Head Phone L 10 Head Phone Detection

JCOM1:

1

2 10

9

1 DCD 2 SIN 3 SOUT 4 DTR 5 Ground 6 DSR 7 RTS 8 CTS 9 RI 10 No Pin

JTPM1: TPM TPM (Trusted Platform Module)TPM

1

2 14

13

1 LPC Clock 2 3V Standby power 3 LPC Reset 4 3.3V Power 5 LPC address & data pin0 6 Serial IRQ 7 LPC address & data pin1 8 5V Power 9 LPC address & data pin2 10 No Pin

11 LPC address & data pin3 12 Ground 13 LPC Frame 14 Ground

14 I/O

JBAT1: CMOS (BIOS) CMOS CMOS

()

CMOS/ BIOS

BIOS 1. PC 2. JBAT15-10 3. JBAT1 4.

JCI1:

()

1. JCI1/ 2. 3. BIOS > Security > Chassis Intrusion Configuration 4. Chassis IntrusionEnabled 5. F10Enter

Yes 6.

1. BIOS > Security > Chassis Intrusion Configuration 2. Chassis IntrusionReset 3. F10Enter

Yes

15I/O BIOS

BIOS BIOS BIOS

BIOSBIOS

BIOS HELP

BIOS

BIOS Press DEL key to enter Setup Menu, F11 to enter Boot Menu Delete

F1: F4: CPU F5: Memory-Z F6: optimized defaults F10: * F12: USB (FAT/ FAT32 ) * F10Yes No

16 BIOS

BIOS BIOSBIOS

BIOSoptimized defaults CMOS

CMOSPCBIOS COMS

BIOS M-FLASHBIOS : MSIWEBBIOSUSB BIOS: 1. BIOSUSBUSB

2. POST BIOS 3. BIOS > M-FLASH > Select one file to update BIOSBIOS

BIOS 4.

MSI DRAGON CENTERBIOS : LAN BIOS: 1. MSI LIVE UPDATE 6 2. BIOS

3. 4. BIOS

5. Next In Windows mode Next Start

BIOS

6.

17BIOS OS

OS www.msi.com

Windows 10 1. PC 2. Windows 10/USB 3. PCRestart 4. POST (Power-On Self Test)F11 5. 6. Press any key to boot from CD or DVD...

(Enter) 7. Windows 10

1. Windows 10 2. MSI 3. Select to choose what happens with this disc

Run DVDSetup.exe Windows MSI DVDSetup.exe

4. /

5. Install 6.

7. OK 8. PC

1. 2. Utilities 3. 4. Install 5.

6. OK 7. PC

18 OS

i< 1> Regulatory Notices

FCC Compliance Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the

equipment and receiver. Connect the equipment into an outlet on

a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

Tested to comply with FCC standards FOR HOME OR OFFICE USE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CE Conformity Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable:

RED 2014/53/EU; Low Voltage Directive 2014/35/ EU; EMC Directive 2014/30/EU; RoHS Directive 2011/65/EU. Compliance with these directives is assessed using applicable European Harmonized Standards. The point of contact for regulatory matters is MSI, MSI-NL Eindhoven 5706 5692 ER Son.

C-Tick Compliance

B ( ) (B) , .

B

VCCI-B

Battery Information European Union:

Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.

Taiwan: For better environmental protection, waste batteries should be collected separately for recycling or special disposal.

California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit:

http://www.dtsc.ca.gov/hazardouswaste/ perchlorate/

CAUTION: There is a risk of explosion, if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.

Chemical Substances Information In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: http://www.msi.com/html/popup/csr/evmtprtt_ pcm.html

Regulatory Notices

ii Regulatory Notices

WEEE (Waste Electrical and Electronic Equipment) Statement ENGLSH To protect the global environment and as an environmentalist, MSI must remind you that... Under the European Union (EU) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of electrical and electronic equipment cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points. DEUTSCH Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt Gem der Richtlinie 2002/96/EG ber Elektro- und Elektronik-Altgerte drfen Elektro- und Elektronik-Altgerte nicht mehr als kommunale Abflle entsorgt werden. MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Europische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurckzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgertesammelstelle in Ihrer Nhe. FRANAIS En tant qucologiste et afin de protger lenvironnement, MSI tient rappeler ceci... Au sujet de la directive europenne (EU) relative aux dchets des quipement lectriques et lectroniques, directive 2002/96/EC, prenant effet le 13 aot 2005, que les produits lectriques et lectroniques ne peuvent tre dposs dans les dcharges ou tout simplement mis la poubelle. Les fabricants de ces quipements seront obligs de rcuprer certains produits en fin de vie. MSI prendra en compte cette exigence relative au retour des produits en fin de vie au sein de la communaut europenne. Par consquent vous pouvez retourner localement ces matriels dans les points de collecte. MSI , , .... () ( WEEE 2002/96/ EC), 13 2005 , ,

, , . MSI , MSI EC, . . ESPAOL MSI como empresa comprometida con la proteccin del medio ambiente, recomienda: Bajo la directiva 2002/96/EC de la Unin Europea en materia de desechos y/o equipos electrnicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como elctricos y equipos electrnicos no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrnicos, estn obligados a hacerse cargo de dichos productos al termino de su perodo de vida. MSI estar comprometido con los trminos de recogida de sus productos vendidos en la Unin Europea al final de su periodo de vida. Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de estos residuos. NEDERLANDS Om het milieu te beschermen, wil MSI u eraan herinneren dat. De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten. SRPSKI Da bi zatitili prirodnu sredinu, i kao preduzee koje vodi rauna o okolini i prirodnoj sredini, MSI mora da vas podesti da Po Direktivi Evropske unije (EU) o odbaenoj ekektronskoj i elektrinoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod elektronsku i elektrinu opremu ne mogu vie biti odbaeni kao obian otpad i proizvoai ove opreme bie prinueni da uzmu natrag ove proizvode na kraju njihovog uobiajenog veka trajanja. MSI e potovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode moete vratiti na lokalnim mestima za prikupljanje.

iiiRegulatory Notices Regulatory Notices

POLSKI Aby chroni nasze rodowisko naturalne oraz jako firma dbajca o ekologi, MSI przypomina, e... Zgodnie z Dyrektyw Unii Europejskiej (UE) dotyczc odpadw produktw elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), ktra wchodzi w ycie 13 sierpnia 2005, tzw. produkty oraz wyposaenie elektryczne i elektroniczne nie mog by traktowane jako mieci komunalne, tak wic producenci tych produktw bd zobowizani do odbierania ich w momencie gdy produkt jest wycofywany z uycia. MSI wypeni wymagania UE, przyjmujc produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z uycia. Produkty MSI bdzie mona zwraca w wyznaczonych punktach zbiorczych. TRKE evreci zelliiyle bilinen MSI dnyada evreyi korumak iin hatrlatr: Avrupa Birlii (AB) Kararnamesi Elektrik ve Elektronik Malzeme At, 2002/96/EC Kararnamesi altnda 13 Austos 2005 tarihinden itibaren geerli olmak zere, elektrikli ve elektronik malzemeler dier atklar gibi pe atlamayacak ve bu elektonik cihazlarn reticileri, cihazlarn kullanm sreleri bittikten sonra rnleri geri toplamakla ykml olacaktr. Avrupa Birliine satlan MSI markal rnlerin kullanm sreleri bittiinde MSI rnlerin geri alnmas istei ile ibirlii ierisinde olacaktr. rnlerinizi yerel toplama noktalarna brakabilirsiniz. ESKY Zle nm na ochran ivotnho prosted - spolenost MSI upozoruje... Podle smrnice Evropsk unie (EU) o likvidaci elektrickch a elektronickch vrobk 2002/96/ EC platn od 13. srpna 2005 je zakzno likvidovat elektrick a elektronick vrobky v bnm komunlnm odpadu a vrobci elektronickch vrobk, na kter se tato smrnice vztahuje, budou povinni odebrat takov vrobky zpt po skonen jejich ivotnosti. Spolenost MSI spln poadavky na odebrn vrobk znaky MSI, prodvanch v zemch EU, po skonen jejich ivotnosti. Tyto vrobky mete odevzdat v mstnch sbrnch. MAGYAR Annak rdekben, hogy krnyezetnket megvdjk, illetve krnyezetvdknt fellpve az MSI emlkezteti nt, hogy ... Az Eurpai Uni (EU) 2005. augusztus 13-n hatlyba lp, az elektromos s elektronikus berendezsek hulladkairl szl 2002/96/ EK irnyelve szerint az elektromos s elektronikus berendezsek tbb nem kezelhetek lakossgi hulladkknt, s az ilyen elektronikus berendezsek gyrti kteless vlnak az ilyen termkek visszavtelre azok hasznos lettartama vgn. Az MSI

betartja a termkvisszavtellel kapcsolatos kvetelmnyeket az MSI mrkanv alatt az EU-n bell rtkestett termkek esetben, azok lettartamnak vgn. Az ilyen termkeket a legkzelebbi gyjthelyre viheti. ITALIANO Per proteggere lambiente, MSI, da sempre amica della natura, ti ricorda che. In base alla Direttiva dellUnione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono pi essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguer a tale Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti allinterno dellUnione Europea alla fine del loro ciclo di vita. possibile portare i prodotti nel pi vicino punto di raccolta

JIS C 0950 JIS C 0950200671 http://www.msi.com/html/popup/csr/ cemm_jp.html http://tw.msi.com/html/popup/csr_tw/ cemm_jp.html

India RoHS This product complies with the India E-waste (Management and Handling) Rule 2011 and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Trkiye EEE ynetmelii Trkiye Cumhuriyeti: EEE Ynetmeliine Uygundur

, 3 2008 1057.

Vit Nam RoHS K t ngy 01/12/2012, tt c cc sn phm do cng ty MSI sn xut tun th Thng t s 30/2011/TT-BCT quy nh tm thi v gii hn hm lng cho php ca mt s ha cht c hi c trong cc sn phm in, in t

iv Regulatory Notices

Environmental Policy The product has been designed

to enable proper reuse of parts and recycling and should not be thrown away at its end of life.

Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.

Visit the MSI website and locate a nearby distributor for further recycling information.

Users may also reach us at gpcontdev@msi. com for information regarding proper Disposal, Take-back, Recycling, and Disassembly of MSI products.

Copyright Micro-Star Intl Co.,Ltd.

Copyright 2019 All rights reserved. The MSI logo used is a registered trademark of Micro-Star Intl Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice.

Trademark Recognition All product names used in this manual are the properties of their respective owners and are acknowledged.

Technical Support If a problem arises with your system and no solution can be obtained from the user guide, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance.

Visit the MSI website for technical guide, BIOS updates, driver updates, and other information: http://www.msi.com

Register your product at: http://register. msi.com

Revision History Version 1.0, 2019/08, First release.

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE)

*

**

SJ/T 11364 : GB/T 26572 : GB/T 26572 RHS * : **

(Pb)

(Hg)

(Cd)

(Cr+6)

(PBB)

(PBDE)

Manualsnet FAQs

If you want to find out how the A320M-A Pro MSI works, you can view and download the MSI A320M-A Pro Quick Start Guide on the Manualsnet website.

Yes, we have the Quick Start Guide for MSI A320M-A Pro as well as other MSI manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a MSI A320M-A Pro. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the MSI A320M-A Pro Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This MSI A320M-A Pro Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download MSI A320M-A Pro Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print MSI A320M-A Pro Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the MSI A320M-A Pro Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.