MSI A320I Pro AC, B350I Pro AC, B350I S01 Quick Start Guide PDF

1 of 150
1 of 150

Summary of Content for MSI A320I Pro AC, B350I Pro AC, B350I S01 Quick Start Guide PDF

1< 1> Contents

Contents Safety Information ...........................................................................................2

Specifications ...................................................................................................3

Rear I/O Panel .................................................................................................6 LAN Port LED Status Table .................................................................................6

Overview of Components ................................................................................7 CPU Socket .........................................................................................................8 DIMM Slots ..........................................................................................................9 PCI_E1: PCIe Expansion Slots ............................................................................9 JFP1, JFP2: Front Panel Connectors ...............................................................10 SATA1~4: SATA 6Gb/s Connectors....................................................................10 ATX_PWR1, CPU_PWR1: Power Connectors....................................................11 JUSB1: USB 2.0 Connector ...............................................................................12 JUSB2: USB 3.1 Gen1 Connector .....................................................................12 CPU_FAN1, SYS_FAN1: Fan Connectors ..........................................................13 JCI1: Chassis Intrusion Connector ...................................................................14 JAUD1: Front Audio Connector .........................................................................14 JRGB1~2: LED strip connector .........................................................................15 JBAT1: Clear CMOS (Reset BIOS) Jumper .......................................................15 EZ Debug LED: Debug LED indicators ..............................................................15

BIOS Setup .....................................................................................................16 Entering BIOS Setup .........................................................................................16 Resetting BIOS ..................................................................................................17 Updating BIOS ...................................................................................................17

Software Description .....................................................................................18 Installing Windows 7 64-bit/ Windows 10 64-bit ..........................................18 Installing Drivers ..............................................................................................18 Installing Utilities ..............................................................................................18

Thank you for purchasing the MSI A320I PRO AC/ B350I PRO AC/ B350I-S01 motherboard. This User Guide gives information about board layout, component overview, BIOS setup and software installation.

2 Safety Information

Safety Information y The components included in this package are prone to damage from electrostatic

discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly.

y Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start.

y Hold the motherboard by the edges to avoid touching sensitive components.

y It is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard.

y Store the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed.

y Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case.

y Do not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user.

y If you need help during any installation step, please consult a certified computer technician.

y Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component.

y Keep this user guide for future reference.

y Keep this motherboard away from humidity.

y Make sure that your electrical outlet provides the same voltage as is indicated on the PSU, before connecting the PSU to the electrical outlet.

y Place the power cord such a way that people can not step on it. Do not place anything over the power cord.

y All cautions and warnings on the motherboard should be noted.

y If any of the following situations arises, get the motherboard checked by service personnel:

Liquid has penetrated into the computer.

The motherboard has been exposed to moisture.

The motherboard does not work well or you can not get it work according to user guide.

The motherboard has been dropped and damaged.

The motherboard has obvious sign of breakage.

y Do not leave this motherboard in an environment above 60C (140F), it may damage the motherboard.

3Safety Information Specications

Specifications

CPU Supports AMD Ryzen 1st and 2nd Generation/ Ryzen with Radeon Vega Graphics/ Athlon with Radeon Vega Graphics and A-series/ Athlon X4 processors for Socket AM4

Chipset AMD A320/ B350 chipset

Memory

y 2x DDR4 memory slots, support up to 32GB

Supports DDR4 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/ 3200(OC)+ MHz*

y Dual channel memory architecture

y Supports ECC UDIMM memory (non-ECC mode)

y Support non-ECC UDIMM memory

* A-series/ Athlon X4 processors support up to 2400 MHz only. Please refer www.msi.com for more information on compatible memory.

Expansion Slots

y 1x PCIe 3.0 x16 slot

Ryzen series processors support x16 mode

Ryzen with Radeon Vega Graphics and A-series / Athlon X4 processors support X8 mode

Athlon with Radeon Vega Graphics processors support x4 mode

Onboard Graphics

y 1x DisplayPort 1.2 port, supporting a maximum resolution of 4096x2160@60Hz* (B350I PRO-AC/ A320I PRO-AC)

y 1x HDMI1.4 port, supporting a maximum resolution of 4096x2160@24Hz* (B350I PRO-AC/ A320I PRO-AC) * Only support when using Ryzen with Radeon Vega Graphics/ Athlon with Radeon Vega Graphics and A-series processors.

Storage

AMD A320/ B350 Chipset

y 4x SATA 6Gb/s ports

Supports RAID 0, RAID1 and RAID 10

y 1x M.2 port (M2_1), supports PCIe 3.0 x 4 (Ryzen Series processors) or PCIe 3.0 x2 (Athlon with Radeon Vega Graphics and A-series / Athlon X4 processors) and SATA 6Gb/s, 2280 storage device

Audio y Realtek ALC887 Codec

y 7.1-Channel High Definition Audio

Continued on next page

4 Specications

Continued from previous page

LAN 1x Realtek 8111H Gigabit LAN controller

Wireless LAN & Bluetooth

Intel Dual Band Wireless-AC 3168 module (B350I PRO-AC/ A320I PRO-AC)

y The Wireless module is pre-install in the M2_2 (Key E) slot.

y Supports Wi-Fi 1x1 802.11ac, dual band (2.4GHz,5GHz) up to 433 Mbps speed.

y Supports Bluetooth 4.2, 4.1, BLE, 4.0, 3.0, 2.1, 2.1+EDR

USB

y 2x USB 3.1 Gen2 (SuperSpeed USB 10Gbps) ports on the back panel (B350I PRO-AC/ B350I-S01)

y 4x USB 3.1 Gen1 (SuperSpeed USB) ports (2 ports on the back panel, 2 ports available through the internal USB connectors)

y 4x USB 2.0 (High-speed USB) ports (2 ports on the back panel, 2 ports available through the internal USB connectors)

Back Panel Connectors

y 1x PS/2 keyboard/ mouse combo port

y 2x USB 2.0 Type-A ports

y 1x DisplayPort port (A320I PRO AC/ B350I PRO AC)

y 1x HDMI port (A320I PRO AC/ B350I PRO AC)

y 2x USB 3.1 Gen2 Type-A ports (B350I PRO AC/ B350I-S01)

y 1x LAN (RJ45) port

y 2x USB 3.1 Gen1 Type-A ports

y 2x WiFi Antenna connectors (A320I PRO AC/ B350I PRO AC)

y 3x audio jacks

Continued on next page

5Specications Specications

Continued from previous page

Internal Connectors

y 1x 24-pin ATX main power connector

y 1x 8-pin ATX 12V power connector

y 4x SATA 6Gb/s connectors

y 1x USB 2.0 connectors (supports additional 2 USB 2.0 ports)

y 1x USB 3.1 Gen1 connector (supports additional 2 USB 3.1 Gen1 ports)

y 1x 4-pin CPU fan connector

y 1x 4-pin system fan connector

y 1x Front panel audio connector

y 2x Front panel connectors

y 1x Chassis Intrusion connector

y 2x LED strip connector

y 1x Clear CMOS jumper

I/O Controller NUVOTON 6795D Controller Chip

Hardware Monitor

y CPU/System temperature detection

y CPU/System fan speed detection

y CPU/System fan speed control

Form Factor y Mini-ITX Form Factor

y 6.7 in. x 6.7 in. (17.0 cm x 17.0 cm)

BIOS Features

y 1x 128 Mb flash

y UEFI AMI BIOS

y ACPI 5.0, SM BIOS 3.0

y Multi-language

Software

y Drivers

y SUPER CHARGER

y COMMAND CENTER

y LIVE UPDATE 6

y MYSTIC LIGHT

y NETWORK GENIE

y MSI SMART TOOL

y X-BOOST

y RAMDISK

y Norton Security

y Google Chrome,Google Toolbar, Google Drive

y CPU-Z MSI GAMING

6 Rear I/O Panel

Rear I/O Panel

Audio 7.1-channel Configuration To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1 connector and follow the below steps.

1. Click on the Realtek HD Audio Manager > Advanced Settings to open the dialog below.

2. Select Mute the rear output device, when a front headphone plugged in.

3. Plug your speakers to audio jacks on rear and front I/O panel. When you plug into a device at an audio jack, a dialogue window will pop up asking you which device is current connected.

PS/2

LAN USB 2.0

(B350I PRO AC & B350I-S01) USB 3.1 Gen2

USB 3.1 Gen1

DisplayPort

Line-in

Line-out

Mic in

Wi-Fi Antenna Connectors

Link/ Activity LED

Status Description Off No link

Yellow Linked

Blinking Data activity

Speed LED

Status Description Off 10 Mbps connection

Green 100 Mbps connection

Orange 1 Gbps connection

LAN Port LED Status Table

(A320I PRO AC & B350I PRO AC) (A320I PRO AC & B350I PRO AC)

(A320I PRO AC & B350I PRO AC)

7Rear I/O Panel Overview of Components

Overview of Components

SYS_FAN1 EZ Debug LED CPU_FAN1

JUSB2

ATX_PWR1

JUSB1

CPU Socket

JFP2

JFP1 PCI_E1

JAUD1

M2_1

JRGB2

JRGB1

DIMMA1

DIMMB1

JBAT1

CPU_PWR1

SA TA

3 / S

AT A4

SA TA

1 / S

AT A2

Top View

Bottom View

8 Overview of Components

CPU Socket Please install the CPU into the CPU socket as shown below.

Important

y When changing the processor, the system configuration could be cleared and reset BIOS to default values due to the AM4 processors architecture.

y Always unplug the power cord from the power outlet before installing or removing the CPU.

y When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability.

y Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.

y Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.

y If you purchased a separate CPU and heatsink/ cooler, Please refer to the documentation in the heatsink/ cooler package for more details about installation.

1

3

5

4

6

7

8

2

9Overview of Components Overview of Components

DIMM Slots Please install the memory module into the DIMM slot as shown below.

Important

y Due to chipset resource usage, the available capacity of memory will be a little less than the amount of installed.

y Based on processor specification, the Memory DIMM voltage below 1.35V is suggested to protect the processor.

y Due to AM4 CPU/memory controller official specification limitation, the frequency of memory modules may operate lower than the marked value under the default state. Please refer www.msi.com for more information on compatible memory.

PCI_E1: PCIe Expansion Slots

Important

y When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion cards documentation to check for any necessary additional hardware or software changes.

y If you install a large and heavy graphics card, you need to use a tool such as MSI Gaming Series Graphics Card Bolster to support its weight to prevent deformation of the slot.

1 2 3

2

PCI_E1

Processor

Slot Ryzen Series

Ryzen with Radeon Vega Graphics and

A-series / Athlon X4

Athlon with Radeon Vega

Graphics PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4

10 Overview of Components

SATA1~4: SATA 6Gb/s Connectors These connectors are SATA 6Gb/s interface ports. Each connector can connect to one SATA device.

SATA1

SATA2 SATA3

SATA4

Important

y Please do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission otherwise.

y SATA cables have identical plugs on either sides of the cable. However, it is recommended that the flat connector be connected to the motherboard for space saving purposes.

JFP1, JFP2: Front Panel Connectors These connectors connect to the switches and LEDs on the front panel.

1

2 10

9

JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED -

5 Reset Switch 6 Power Switch

7 Reset Switch 8 Power Switch

9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

JFP1

11Overview of Components Overview of Components

ATX_PWR1, CPU_PWR1: Power Connectors These connectors allow you to connect an ATX power supply.

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V

2 +3.3V 14 -12V

3 Ground 15 Ground

4 +5V 16 PS-ON#

5 Ground 17 Ground

6 +5V 18 Ground

7 Ground 19 Ground

8 PWR OK 20 Res

9 5VSB 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 +3.3V 24 Ground

5

4 1

8

CPU_PWR1

1 Ground 5 +12V

2 Ground 6 +12V

3 Ground 7 +12V

4 Ground 8 +12V

Important

Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.

12 Overview of Components

JUSB2: USB 3.1 Gen1 Connector This connector allows you to connect USB 3.1 Gen1 ports on the front panel.

1 10

1120

1 Power 11 USB2.0+

2 USB3_RX_DN 12 USB2.0-

3 USB3_RX_DP 13 Ground

4 Ground 14 USB3_TX_C_DP

5 USB3_TX_C_DN 15 USB3_TX_C_DN

6 USB3_TX_C_DP 16 Ground

7 Ground 17 USB3_RX_DP

8 USB2.0- 18 USB3_RX_DN

9 USB2.0+ 19 Power

10 NC 20 No Pin

Important

Note that the Power and Ground pins must be connected correctly to avoid possible damage.

JUSB1: USB 2.0 Connector This connector allows you to connect USB 2.0 ports on the front panel.

1

2 10

9

1 VCC 2 VCC

3 USB0- 4 USB1-

5 USB0+ 6 USB1+

7 Ground 8 Ground

9 No Pin 10 NC

Important

y Note that the VCC and Ground pins must be connected correctly to avoid possible damage.

y In order to recharge your iPad,iPhone and iPod through USB ports, please install MSI SUPER CHARGER utility.

13Overview of Components Overview of Components

CPU_FAN1, SYS_FAN1: Fan Connectors Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. DC Mode fan connectors control fan speed by changing voltage. When you plug a 3-pin (Non-PWM) fan to a fan connector in PWM mode, the fan speed will always maintain at 100%, which might create a lot of noise. You can follow the instruction below to adjust the fan connector to PWM or DC Mode.

Switching fan mode and adjusting fan speed You can switch between PWM mode and DC mode and adjust fan speed in BIOS > HARDWARE MONITOR.

Select PWM mode or DC mode

Important

Make sure fans are working properly after switching the PWM/ DC mode.

There are gradient points of the fan speed that allow you to adjust fan speed in relation to CPU temperature.

Default PWM Mode fan connector

Default DC Mode fan connector

1

CPU_FAN1

1

SYS_FAN1

PWM Mode pin definition

1 Ground 2 +12V

3 Sense 4 Speed Control Signal

DC Mode pin definition

1 Ground 2 Voltage Control

3 Sense 4 NC

Pin definition of fan connectors

14 Overview of Components

JCI1: Chassis Intrusion Connector This connector allows you to connect the chassis intrusion switch cable.

Normal

(default)

Trigger the chassis intrusion event

Using chassis intrusion detector 1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis.

2. Close the chassis cover.

3. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.

4. Set Chassis Intrusion to Enabled.

5. Press F10 to save and exit and then press the Enter key to select Yes.

6. Once the chassis cover is opened again, a warning message will be displayed on screen when the computer is turned on.

Resetting the chassis intrusion warning 1. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.

2. Set Chassis Intrusion to Reset.

3. Press F10 to save and exit and then press the Enter key to select Yes.

JAUD1: Front Audio Connector This connector allow you to connect audio jacks on the front panel.

1

2 10

9

1 MIC L 2 Ground

3 MIC R 4 NC

5 Head Phone R 6 MIC Detection

7 SENSE_SEND 8 No Pin

9 Head Phone L 10 Head Phone Detection

15Overview of Components Overview of Components

JRGB1~2: LED strip connector This connector allows you to connect the 5050 RGB LED strips.

Important

y This connector supports 5050 RGB multi-color LED strips (12V/G/R/B) with the maximum power rating of 3A (12V). Please keeping the LED strip shorter than 2 meters to prevent dimming.

y Always turn off the power supply and unplug the power cord from the power outlet before installing or removing the RGB LED strip.

y Please use MSIs software to control the extended LED strip.

1

1 +12V 2 G

3 R 4 B 1

JRGB1/ 2

5050 LED strip

JBAT1: Clear CMOS (Reset BIOS) Jumper There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the system configuration, set the jumpers to clear the CMOS memory.

Keep Data (default)

Clear CMOS/ Reset BIOS

Resetting BIOS to default values 1. Power off the computer and unplug the power cord.

2. Use a jumper cap to short JBAT1 for about 5-10 seconds.

3. Remove the jumper cap from JBAT1.

4. Plug the power cord and power on the computer.

EZ Debug LED: Debug LED indicators These LEDs indicate the status of the motherboard.

BOOT VGA DRAM CPU

BOOT - indicates booting device is not detected or fail.

VGA - indicates GPU is not detected or fail.

DRAM - indicates DRAM is not detected or fail.

CPU - indicates CPU is not detected or fail.

16 BIOS Setup

BIOS Setup The default settings offer the optimal performance for system stability in normal conditions. You should always keep the default settings to avoid possible system damage or failure booting unless you are familiar with BIOS.

Important

y BIOS items are continuous update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be held for reference only. You could also refer to the HELP information panel for BIOS item description.

y The pictures in this chapter are for reference only and may vary from the product you purchased.

y The BIOS items will vary with the processor.

Entering BIOS Setup Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot Menu message appears on the screen during the boot process.

Function key F1: General Help

F2: Add/ Remove a favorite item

F3: Enter Favorites menu

F4: Enter CPU Specifications menu

F5: Enter Memory-Z menu

F6: Load optimized defaults

F7: Switch between Advanced mode and EZ mode

F8: Load Overclocking Profile

F9: Save Overclocking Profile

F10: Save Change and Reset*

F12: Take a screenshot and save it to USB flash drive (FAT/ FAT32 format only).

* When you press F10, a confirmation window appears and it provides the modification information. Select between Yes or No to confirm your choice.

17BIOS Setup BIOS Setup

Resetting BIOS You might need to restore the default BIOS setting to solve certain problems. There are several ways to reset BIOS:

y Go to BIOS and press F6 to load optimized defaults.

y Short the Clear CMOS jumper on the motherboard.

Important

Please refer to the Clear CMOS jumper section for resetting BIOS.

Updating BIOS

Updating BIOS with M-FLASH Before updating:

Please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file into the USB flash drive.

Updating BIOS:

1. Press Del key to enter the BIOS Setup during POST.

2. Insert the USB flash drive that contains the update file into the computer.

3. Select the M-FLASH tab and click on Yes to reboot the system and enter the flash mode.

4. Select a BIOS file to perform the BIOS update process.

5. After the flashing process is 100% completed, the system will reboot automatically.

Updating the BIOS with Live Update 6 Before updating:

Make sure the LAN driver is already installed and the Internet connection is set properly.

Updating BIOS:

1. Install and launch MSI LIVE UPDATE 6.

2. Select BIOS Update.

3. Click on Scan button.

4. Click on Download icon to download and install the latest BIOS file.

5. Click Next and choose In Windows mode. And then click Next and Start to start updating BIOS.

6. After the flashing process is 100% completed, the system will restart automatically.

18 Software Description

Software Description Please download and update the latest utilities and drivers at www.msi.com

Installing Windows 7 64-bit/ Windows 10 64-bit 1. Power on the computer.

2. Insert the Windows 7/ 10 disc into your optical drive.

Note: Due to chipset limitation, during the Windows 7 installation process, USB optical drives and USB pen drives are not supported. You can use MSI Smart Tool to install Windows 7.

3. Press the Restart button on the computer case.

4. Press F11 key during the computer POST (Power-On Self Test) to get into Boot Menu.

5. Select your optical drive from the Boot Menu.

6. Press any key when screen shows Press any key to boot from CD or DVD... message.

7. Follow the instructions on the screen to install Windows 7/ 10.

Installing Drivers 1. Start up your computer in Windows 7/ 10.

2. Insert MSI Driver Disc into your optical drive.

3. The installer will automatically appear and it will find and list all necessary drivers.

4. Click Install button.

5. The software installation will then be in progress, after it has finished it will prompt you to restart.

6. Click OK button to finish.

7. Restart your computer.

Installing Utilities Before you install utilities, you must complete drivers installation.

1. Insert MSI Driver Disc into your optical drive.

2. The installer will automatically appear.

3. Click Utilities tab.

4. Select the utilities you want to install.

5. Click Install button.

6. The utilities installation will then be in progress, after it has finished it will prompt you to restart.

7. Click OK button to finish.

8. Restart your computer.

1< 1>

...........................................................................................................2

...................................................................................................................3

I/O .....................................................................................................6 LAN LED ...................................................................................6

........................................................................................................7 CPU ..............................................................................................................8 DIMM ...........................................................................................................9 PCI_E1: PCIe ........................................................................................9 JFP1, JFP2: ............................................................................10 SATA1~4: SATA 6Gb/s ............................................................................10 ATX_PWR1, CPU_PWR1: ................................................................11 JUSB1: USB 2.0 .....................................................................................12 JUSB2: USB 3.1 Gen1 ............................................................................12 CPU_FAN1, SYS_FAN1: .....................................................................13 JCI1: ........................................................................................14 JAUD1: .........................................................................14 JRGB1~2: LED ............................................................................15 JBAT1: CMOS (Reset BIOS()) ............................................15 EZ LED: LED ................................................................ 15

BIOS() ........................................................................................16 BIOS() ...........................................................................................16 BIOS() ...........................................................................................17 BIOS() .....................................................................................17

...............................................................................................18 Windows 7 64-bit/ Windows 10 64-bit ............................................18 ..............................................................................................18 ..............................................................................................18

MSI A320I PRO AC/ B350I PRO AC/ B350I-S01 . , , BIOS() .

2

y (ESD) .

y . , .

y .

y ESD . ESD , .

y .

y .

y . , .

y .

y .

y .

y .

y PSU PSU .

y . .

y .

y , .

.

.

.

.

.

y 60C (140F) . .

3

CPU AM4 AMD Ryzen 1 2 / Radeon Ryzen/ Radeon Athlon A-/ Athlon X4

AMD A320/ B350

y DDR4 2 , 32GB DDR4 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/ 3200(OC)+ *

y y ECC UDIMM (non-ECC )

y non-ECC UDIMM *A- / Athlon X4 2400 MHz . www.msi.com .

y PCIe 3.0 x16 1 Ryzen x16 Radeon Ryzen A-/

Athlon X4 X8 Radeon Athlon x4

y DisplayPort 1.2 1, 4096x2160@60Hz* (B350I PRO-AC/ A320I PRO-AC)

y HDMI 1.4 1, 4096x2160@24Hz* (B350I PRO-AC/ A320I PRO-AC) *Radeon Ryzen / Radeon Athlon A- .

AMD A320/ B350 y SATA 6Gb/s 4

RAID 0, RAID1 RAID 10 y M.2 (M2_1) 1, PCIe 3.0 x 4 (Ryzen ) PCIe 3.0 x2 (Radeon Athlon A- / Athlon X4 ) SATA 6Gb/s, 2280

y Realtek ALC887 y 7.1- HD

4

LAN Realtek 8111H Gigabit LAN 1

LAN Bluetooth

Intel -AC 3168 (B350I PRO-AC/ A320I PRO-AC)

y M2_2 (KeyE) .

y Wi-Fi 1x1 802.11ac, (2.4GHz,5GHz) 433 Mbps

y Supports 4.2, 4.1, BLE, 4.0, 3.0, 2.1, 2.1+EDR

USB

y (B350I PRO-AC/ B350I-S01) USB 3.1 Gen2 ( USB 10Gbps) 2

y USB 3.1 Gen1 ( USB) 4 ( 2, USB 2 )

y USB 2.0 ( USB) 4 ( 2, USB 2 )

y PS/2 / 1 y USB 2.0 A 2 y DisplayPort (A320I PRO AC/ B350I PRO AC) 1 y HDMI (A320I PRO AC/ B350I PRO AC) 1 y USB 3.1 Gen2 A 2(B350I PRO AC/ B350I-S01)

y LAN (RJ45) 1 y USB 3.1 Gen1 A 2 y WiFi (A320I PRO AC/ B350I PRO AC) 2 y 3

y 24 ATX 1 y 8 ATX 12V 1 y SATA 6Gb/s 4

y USB 2.0 1( USB 2.0 2 )

y USB 3.1 Gen1 1 ( USB 3.1 Gen1 2 )

y 4 CPU 1 y 4 1 y 1 y 2 y 1 y LED 2 y 1

5

I/O NUVOTON 6795D

y CPU/ y CPU/ y CPU/

y Mini-ITX y 6.7 in. x 6.7 in. (17.0 cm x 17.0 cm)

BIOS()

y 128 Mb 1 y UEFI AMI BIOS()

y ACPI 5.0, SM BIOS() 3.0

y

y y y y 6

y

y y MSI y X- y y

y Google Chrome,Google Toolbar, Google Drive : , ,

y CPU-Z MSI

6 I/O

I/O

7.1- 7.1 I/O JAUD1 . .

1. Realtek HD Audio Manager (Realtek HD ) > Advanced Settings( ) .

2. [Mute the rear output device, when a front headphone plugged in]( ) .

3. I/O . .

PS/2

LAN USB 2.0

(B350I PRO AC & B350I-S01) USB 3.1 Gen2

USB 3.1 Gen1

DisplayPort

Line Line

Mic in

Wi-Fi

LED

Description 10 Mbps .

100 Mbps .

1 Gbps

LAN LED (A320I PRO AC & B350I PRO AC) (A320I PRO AC & B350I PRO AC)

(A320I PRO AC & B350I PRO AC)

/ LED

LAN

.

LAN

.

LAN

.

7 I/O

SYS_FAN1

EZ LED CPU_FAN1

JUSB2

ATX_PWR1

JUSB1

CPU

JFP2

JFP1 PCI_E1

JAUD1

M2_1

JRGB2

JRGB1

DIMMA1

DIMMB1

JBAT1

CPU_PWR1

SA TA

3 / S

AT A4

SA TA

1 / S

AT A2

8

CPU CPU CPU .

y , AM4 BIOS .

y CPU . y CPU , CPU . CPU .

y CPU . y CPU CPU . CPU ( ) .

y CPU / , / .

1

3

5

4

6

7

8

2

9

DIMM DIMM .

y . y CPU CPU DIMM 1.35V . y AM4 CPU/ . www.msi.com .

PCI_E1: PCIe

y . .

y , MSI Gaming Series Graphics Card Bolster .

1 2 3

2

PCI_E1

Ryzen

Radeon Ryzen A- / Athlon X4

Radeon

Athlon PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4

10

SATA1~4: SATA 6Gb/s SATA 6Gb/s . SATA

SATA1

SATA2 SATA3

SATA4

y SATA 90 . , . y SATA .

JFP1, JFP2: LED .

1

2 10

9

JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED -

5 Reset Switch 6 Power Switch

7 Reset Switch 8 Power Switch

9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

JFP1

11

ATX_PWR1, CPU_PWR1: ATX .

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V

2 +3.3V 14 -12V

3 Ground 15 Ground

4 +5V 16 PS-ON#

5 Ground 17 Ground

6 +5V 18 Ground

7 Ground 19 Ground

8 PWR OK 20 Res

9 5VSB 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 +3.3V 24 Ground

5

4 1

8

CPU_PWR1

1 Ground 5 +12V

2 Ground 6 +12V

3 Ground 7 +12V

4 Ground 8 +12V

ATX .

12

JUSB2: USB 3.1 Gen1 USB 3.1 Gen1 .

1 10

1120

1 Power 11 USB2.0+

2 USB3_RX_DN 12 USB2.0-

3 USB3_RX_DP 13 Ground

4 Ground 14 USB3_TX_C_DP

5 USB3_TX_C_DN 15 USB3_TX_C_DN

6 USB3_TX_C_DP 16 Ground

7 Ground 17 USB3_RX_DP

8 USB2.0- 18 USB3_RX_DN

9 USB2.0+ 19 Power

10 NC 20 No Pin

.

JUSB1: USB 2.0 USB 2.0 .

1

2 10

9

1 VCC 2 VCC

3 USB0- 4 USB1-

5 USB0+ 6 USB1+

7 Ground 8 Ground

9 No Pin 10 NC

y VCC . y USB iPad,iPhone iPod MSI SUPER CHARGER .

13

CPU_FAN1, SYS_FAN1: PWM (Pulse Width Modulation) DC . PWM 12V . DC . PWM 3- (Non-PWM) , 100% . PWM DC .

PWM DC BIOS ()> Hardware Monitor( ) .

PWM DC

PWM/ DC , .

CPU .

PWM

DC

1

CPU_FAN1

1

SYS_FAN1

PWM 1 Ground 2 +12V

3 Sense 4 Speed Control Signal

DC 1 Ground 2 Voltage Control

3 Sense 4 NC

14

JCI1: .

( )

1. JCI1 / .

2. .

3. BIOS() > SETTINGS() > Security() > Chassis Intrusion Configuration( ) .

4. Chassis Intrusion( ) Enabled() .

5. F10 . Enter Yes .

6. .

1. BIOS() > SETTINGS() > Security() > Chassis Intrusion

Configuration( ) .

2. Chassis Intrusion( ) Reset() .

3. F10 . Enter Yes .

JAUD1: .

1

2 10

9

1 MIC L 2 Ground

3 MIC R 4 NC

5 Head Phone R 6 MIC Detection

7 SENSE_SEND 8 No Pin

9 Head Phone L 10 Head Phone Detection

15

JRGB1~2: LED 5050 RGB LED .

y 3A (12V) 5050 RGB LED .

LED 2m . y RGB LED .

y MSI LED .

1

1 +12V 2 G

3 R 4 B 1

JRGB1/ 2

5050 LED

JBAT1: CMOS (Reset BIOS()) CMOS . CMOS

( )

CMOS / BIOS

BIOS() 1. .

2. JBAT1 5-10 .

3. JBAT1 .

4. .

EZ LED: LED LED .

BOOT VGA DRAM CPU

BOOT - .

VGA - GPU .

DRAM - DRAM .

CPU - CPU .

16 BIOS()

BIOS() . BIOS , .

y BIOS . BIOS . BIOS HELP() .

y . y BIOS .

BIOS() Press DEL key to enter Setup Menu, F11 to enter Boot Menu(DEL , F11 ) Delete .

F1: F2: / F3:

F4: F5: Memory-Z

F6: F7: EZ

F8: F9:

F10: *

F12: USB (FAT/ FAT32 )

* F10 . Yes No .

17BIOS() BIOS()

BIOS() BIOS() . BIOS .

y BIOS() F6 .

y CMOS .

BIOS() CMOS .

BIOS() M-FLASH BIOS() BIOS MSI BIOS USB .

BIOS 1. POST Del BIOS() .

2. USB .

3. M-FLASH Yes .

4. BIOS() BIOS() .

5. 100% .

Updating the BIOS() with Live Update 6 Live Update 6 BIOS LAN .

BIOS

1. MSI LIVE UPDATE 6 .

2. BIOS() Update .

3. Scan .

4. Download BIOS .

5. Next In Windows mode Next Start BIOS( ) .

6. 100% .

18

www.msi.com

Windows 7 64-bit/ Windows 10 64-bit 1. .

2. Windows 7/ 10 .

: Windows 7 USB USB . MSI Smart Tool(MSI ) Windows 7 .

3. Restart( ) .

4. POST (Power-On Self Test) F11 .

5. .

6. Press any key to boot from CD or DVD... .

7. Windows 7/ 10 .

1. Windows 7/ 10 .

2. MSI .

3. .

4. Install() .

5. . .

6. OK() .

7. .

.

1. MSI .

2. .

3. Utilities() .

4. .

5. Install() .

6. . .

7. OK() .

8. .

1< 1> Table des matires

Table des matires Informations de scurit .................................................................................2

Spcifications ...................................................................................................3

Panneau arrire Entre/ Sortie ......................................................................6 Tableau explicatif de ltat de la LED du port LAN ............................................6

Vue densemble des composants ...................................................................7 Socket processeur ..............................................................................................8 Slots DIMM ..........................................................................................................9 PCI_E1: Slots dextension PCIe .........................................................................9 JFP1, JFP2: Connecteurs de panneau avant ....................................................10 SATA1~4: Connecteurs SATA 6 Gb/s.................................................................10 ATX_PWR1, CPU_PWR1: Connecteurs dalimentation ...................................11 JUSB1: Connecteur USB 2.0 .............................................................................12 JUSB2: Connecteur USB 3.1 Gen1 ...................................................................12 CPU_FAN1, SYS_FAN1: Connecteurs pour ventilateurs ..................................13 JCI1: Connecteur intrusion chssis..................................................................14 JAUD1: Connecteur audio avant .......................................................................14 JRGB1~2: Connecteurs de ruban LED ............................................................15 JBAT1: Cavalier Clear CMOS (Rinitialisation BIOS)........................................15 EZ Debug LED: Indicateurs LED de dbogage .................................................15

Configuration du BIOS ...................................................................................16 Entrer dans linterface Setup du BIOS ............................................................16 Rinitialiser le BIOS ..........................................................................................17 Mettre le BIOS jour.........................................................................................17

Informations sur les logiciels........................................................................18 Installer Windows 7 64-bit/ Windows 10 64-bit ............................................18 Installer les pilotes ...........................................................................................18 Installer les utilitaires .......................................................................................18

Merci davoir achet une carte mre MSI A320I PRO AC/ B350I PRO AC/ B350I-S01. Ce manuel dutilisateur fournit des informations sur le schma, la vue densemble des composants, la conguration du BIOS et linstallation des logiciels.

2 Informations de scurit

Informations de scurit y Les composants dans lemballage peuvent tre endommags par des dcharges

lectrostatiques (ESD). Pour vous assurer de correctement monter votre ordinateur, veuillez vous rfrer aux instructions ci-dessous.

y Assurez-vous de bien connecter tous les composants. En cas de mauvaise connexion, il se peut que lordinateur ne reconnaisse pas le composant et que le dmarrage choue.

y Veuillez tenir la carte mre par les bords pour viter de toucher les composants sensibles.

y Il est recommand de porter un bracelet antistatique lors de la manipulation de la carte mre pour prvenir tout dommage. Si vous navez pas de bracelet antistatique, touchez un objet mtallique reli la terre avant de manipuler la carte mre afin de vous dcharger de votre charge statique. Touchez rgulirement lobjet mtallique pendant toute la manipulation.

y Tant que la carte mre nest pas installe, conservez-la dans un rcipient protg contre les ondes lectrostatiques ou sur une couche antistatique.

y Avant de dmarrer lordinateur, vrifiez si toutes les vis et les composants mtalliques sont bien fixs sur la carte mre ou ailleurs dans le botier de lordinateur.

y Ne dmarrez pas lordinateur avant davoir termin linstallation. Ceci peut endommager les composants ou vous blesser.

y Si vous avez besoin daide pendant linstallation, veuillez consulter un technicien informatique certifi.

y Avant dinstaller les composants dordinateur, veuillez toujours mettre hors tension et dbrancher le cordon dalimentation.

y Gardez ce manuel pour rfrences futures.

y Protgez ce manuel contre lhumidit.

y Avant de brancher le bloc dalimentation sur la sortie lectrique, veuillez vous assurer que la tension de la sortie lectrique est bien gale celle du bloc dalimentation.

y Placez le cordon dalimentation de faon viter que lon marche dessus. Ne posez rien sur le cordon dalimentation.

y Veuillez prter attention toutes les alertes et remarques indiques sur la carte mre.

y Dans un cas comme ci-dessous, faites appel au service autoris pour vrifier votre carte mre :

Un liquide a pntr dans lordinateur.

La carte mre a t expose de lhumidit.

La carte mre ne fonctionne pas comme indiqu dans les instructions.

La carte mre est tombe par terre et a t endommage.

La carte mre est casse.

y Ne pas mettre la carte mre dans un environnement dont la temprature est suprieure 60C (140F) sous peine de lendommager.

3Informations de scurit Spcications

Spcifications

CPU

Support des processeurs AMD Ryzen de 1re et 2me gnration/ des processeurs Ryzen avec processeur graphique Radeon Vega/ des processeurs Athlon avec processeur graphique Radeon Vega et processeur de srie A/ Athlon X4 pour socket AM4

Chipset chipset AMD A320/ B350

Mmoire

y 2 x slots pour mmoire DDR4, support jusqu 32 Go

Support DDR4 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/ 3200(OC)+ MHz*

y Architecture de mmoire double canal

y Support mmoire ECC UDIMM (mode non-ECC)

y Support mmoire non-ECC UDIMM * Les processeurs de srie A ou Athlon X4 supportent seulement jusqu 2400 MHz. Veuillez vous rfrer au site www.msi.com pour plus dinformations sur la mmoire compatible.

Slots dextension

y 1 x slot PCIe 3.0 x16

Les processeurs de srie Ryzen supportent mode x16

Les processeurs Ryzen avec processeur graphique Radeon Vega et processeur de srie A/ Athlon X4 supportent mode x8

Les processeurs Athlon avec processeur graphique Radeon Vega supportent mode x4

Sorties vido intgres

y 1 x port DisplayPort 1.2, supportant une rsolution maximum de 4096x2160@60Hz* (B350I PRO-AC/ A320I PRO-AC)

y 1 x port HDMI1.4, supportant une rsolution maximum de 4096x2160@24Hz* (B350I PRO-AC/ A320I PRO-AC) * Cette rsolution est seulement supporte lors de lutilisation des processeurs Ryzen avec processeur graphique Radeon Vega/ des processeurs Athlon avec processeur graphique Radeon Vega et processeur de srie A.

Stockage

Chipset AMD A320/ B350

y 4 x ports SATA 6 Gb/s

Support des architectures RAID 0, RAID1 et RAID 10

y 1x port M.2 (M2_1), support PCIe 3.0 x4(des processeurs srie Ryzen) ou PCIe 3.0 x2 (des processeurs Athlon avec processeur graphique Radeon Vega et processeur srie-A/ Processeur Athlon X4)et des priphriques de stockage SATA 6 Gb/s 2280

Suite du tableau sur la page suivante

4 Spcications

Suite du tableau de la page prcdente

Audio y Realtek ALC887 Codec

y Audio haute dfinition 7,1

LAN 1 x contrleur Realtek 8111H Gigabit LAN

Wireless LAN et Bluetooth

Module Intel Dual Band Wireless-AC 3168 (B350I PRO-AC/ A320I PRO-AC)

y Le module sans fil est prinstall dans le slot M2_2 (Touche E).

y Support Wi-Fi 1x1 802.11ac, double bande (2.4GHz,5GHz) jusqu la vitesse de 433 Mbps.

y Support Bluetooth 4.2, 4.1, BLE, 4.0, 3.0, 2.1, 2.1+EDR

USB

y 2 x ports USB 3.1 Gen2 SuperSpeed USB 10Gbps sur le panneau arrire (B350I PRO-AC/ B350I-S01)

y 4 x ports USB 3.1 Gen1 SuperSpeed USB (2 ports sur le panneau arrire, 2 ports disponibles par lintermdiaire des connecteurs USB internes)

y 4 x ports USB 2.0 High-speed USB (2 ports sur le panneau arrire, 2 ports disponibles par lintermdiaire des connecteurs USB internes)

Connecteurs sur le panneau arrire

y 1 x port clavier/ souris PS/2

y 2 x ports USB 2.0 Type-A

y 1 x port DisplayPort (A320I PRO AC/ B350I PRO AC)

y 1 x port HDMI (A320I PRO AC/ B350I PRO AC)

y 2 x ports USB 3.1 Gen2 Type-A (B350I PRO AC/ B350I-S01)

y 1 x port LAN (RJ45)

y 2 x ports USB 3.1 Gen1 Type-A

y 2 x connecteurs dantenne WiFi (A320I PRO AC/ B350I PRO AC)

y 3 x jacks audio

Suite du tableau sur la page suivante

5Spcications Spcications

Suite du tableau de la page prcdente

Connecteurs internes

y 1 x connecteur dalimentation principal ATX 24 broches

y 1 x connecteur dalimentation ATX 12V 8 broches

y 4 x connecteurs SATA 6 Gb/s

y 1 x connecteur USB 2.0 (support de 2 autres ports USB 2.0)

y 1 x connecteur USB 3.1 Gen1 (support de 2 autres ports USB 3.1 Gen1)

y 1 x connecteur de ventilateurs CPU 4 broches

y 1 x connecteur de ventilateurs systme 4 broches

y 1 x connecteur audio avant

y 2 x connecteurs de panneau avant

y 1 x connecteur intrusion chssis

y 2 x connecteurs de ruban LED

y 1 x cavalier Clear CMOS

Contrleur E/S Contrleur NUVOTON 6795D

Moniteur systme

y Dtection de la temprature du CPU et du systme

y Dtection de la vitesse du ventilateur du CPU et du systme

y Contrle de la vitesse du ventilateur du CPU et du systme

Dimensions y Format Mini-ITX

y 17,0 cm x 17,0 cm (6,7 x 6,7)

Fonctions BIOS

y 1 x flash BIOS 128 Mb

y UEFI AMI BIOS

y ACPI 5.0, SM BIOS 3.0

y Multilingue

Logiciel

y Pilotes

y SUPER CHARGER

y COMMAND CENTER

y LIVE UPDATE 6

y MYSTIC LIGHT

y NETWORK GENIE

y MSI SMART TOOL

y X-BOOST

y RAMDISK

y Norton Security

y Google Chrome, Google Toolbar et Google Drive

y CPU-Z MSI GAMING

6 Panneau arrire Entre/ Sortie

Panneau arrire Entre/ Sortie

Configuration audio 7,1-canal Pour rgler le systme audio 7,1, connectez le module audio entre/ sortie du panneau avant au connecteur JAUD1 et suivez les tapes ci-dessous.

1. Cliquez sur Realtek HD Audio Manager > Advanced Settings (Paramtres avancs) pour ouvrir le dialogue suivant.

2. Choisissez Mute the rear output device, when a front headphone plugged in (Passer le priphrique arrire en silencieux quand un casque est branch lavant).

3. Branchez vos haut-parleurs aux prises audio sur les panneaux entre/sortie arrire et avant. Lorsquun priphrique est branch sur une prise audio, une fentre de dialogue apparatet vous demande de choisir le priphrique connect que vous souhaitez utiliser.

PS/2

LAN USB 2.0

(B350I PRO AC et B350I-S01) USB 3.1 Gen2

USB 3.1 Gen1

DisplayPort

Entre Ligne

Sortie Ligne

Entre Microphone

Connecteurs dantenne Wi-Fi

LED indiquant la connexion et lactivit

Etat Description Eteint Pas de connexion

Jaune Connexion correcte

Clignote Activit en cours

LED indiquant la vitesse

Etat Description Eteint Dbit de 10 Mbps

Vert Dbit de 100 Mbps

Orange Dbit de 1 Gbps

Tableau explicatif de ltat de la LED du port LAN

(A320I PRO AC et B350I PRO AC) (A320I PRO AC et B350I PRO AC)

(A320I PRO AC et B350I PRO AC)

7Panneau arrire Entre/ Sortie Vue densemble des composants

Vue densemble des composants

M2_1

Vue de dessus

Vue de dessous

SYS_FAN1 EZ Debug LED CPU_FAN1

JUSB2

ATX_PWR1

JUSB1

Socket processeur

JFP2

JFP1 PCI_E1

JAUD1 JRGB2

JRGB1

DIMMA1

DIMMB1

JBAT1

CPU_PWR1

SA TA

3 / S

AT A4

SA TA

1 / S

AT A2

8 Vue densemble des composants

Socket processeur Installer le CPU dans le socket du processeur comme indiqu ci-dessous.

Important

y Lorsque vous changez le processeur, il se peut que la configuration du systme soit efface et que le BIOS soit rinitialis ses valeurs par dfaut en raison de larchitecture du processeur AM4.

y Avant dinstaller ou de retirer le processeur du socket, veillez toujours dbrancher le cble dalimentation de la prise lectrique.

y Lors de linstallation dun processeur, noubliez pas dinstaller un ventilateur pour processeur. Un ventilateur de processeur est ncessaire pour protger le processeur contre la surchauffe et maintenir la stabilit du systme.

y Assurez-vous de ltanchit entre le ventilateur et le processeur avant de dmarrer votre systme.

y La surchauffe peut facilement endommager le processeur et la carte mre. Assurez-vous toujours que le systme de refroidissement fonctionne correctement pour protger le processeur de la surchauffe. Assurez-vous dappliquer une couche de pte thermique (ou adhsif thermique) entre le processeur et le systme de refroidissement afin damliorer la dissipation de la chaleur.

y Si vous avez achetez un processeur indpendamment du ventilateur, veuillez vous rfrer la documentation dans le paquet du ventilateur pour plus dinformations concernant linstallation.

1

3

5

4

6

7

8

2

9Vue densemble des composants Vue densemble des composants

Slots DIMM Insrer le module de mmoire dans lemplacement DIMM comme indiqu ci- dessous.

Important

y Du fait des ressources utilises par le chipset, la capacit de mmoire disponible est un peu moins leve que celle installe.

y Bas sur les spcifications du processeur, une tension dune barrette mmoire en dessous de 1.35V est conseille pour protger le processeur.

y Du fait des limites officiels des spcifications du contrleur CPU/ mmoire AM4, les modules de mmoire peuvent fonctionner une frquence rduite par rapport la valeur indique en mode dfaut. Veuillez vous rfrer au site www.msi.com pour plus dinformations sur la mmoire compatible.

PCI_E1: Slots dextension PCIe

Important

y Veillez toujours mettre lordinateur hors tension et dbrancher le cordon dalimentation avant dinstaller les cartes dextension. Rfrez-vous la documentation des cartes pour vrifier si un composant ou un logiciel doit tre modifi.

y Si vous installez une carte graphique lourde, il vous faut utiliser un outil comme la barre de support MSI Gaming Series pour supporter son poids et pour viter la dformation du slot.

1 2 3

2

PCI_E1

Processeur

Slot Srie Ryzen

Ryzen avec graphique Radeon

Vega et Srie-A / Athlon X4

Athlon avec graphique Radeon

Vega

PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4

10 Vue densemble des composants

SATA1~4: Connecteurs SATA 6 Gb/s Ces connecteurs utilisent une interface SATA 6 Gb/s. Chaque connecteur peut tre reli un appareil SATA.

SATA1

SATA2 SATA3

SATA4

Important

y Veuillez ne pas plier le cble SATA 90 car cela pourrait entraner une perte de donnes pendant la transmission.

y Le cble SATA dispose de prises identiques sur chaque ct. Nanmoins, il est recommand de connecter la prise plate sur la carte mre pour un gain despace.

JFP1, JFP2: Connecteurs de panneau avant Ces connecteurs se lient aux interrupteurs et indicateurs LED du panneau avant.

1

2 10

9

JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED -

5 Reset Switch 6 Power Switch

7 Reset Switch 8 Power Switch

9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

JFP1

11Vue densemble des composants Vue densemble des composants

ATX_PWR1, CPU_PWR1: Connecteurs dalimentation Ces connecteurs vous permettent de relier une alimentation ATX.

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V

2 +3.3V 14 -12V

3 Ground 15 Ground

4 +5V 16 PS-ON#

5 Ground 17 Ground

6 +5V 18 Ground

7 Ground 19 Ground

8 PWR OK 20 Res

9 5VSB 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 +3.3V 24 Ground

5

4 1

8

CPU_PWR1

1 Ground 5 +12V

2 Ground 6 +12V

3 Ground 7 +12V

4 Ground 8 +12V

Important

Veuillez vous assurer que tous les cbles dalimentation sont branchs aux connecteurs adquats afin garantir une opration stable de la carte mre.

12 Vue densemble des composants

JUSB2: Connecteur USB 3.1 Gen1 Ce connecteur vous permet de relier un port USB 3.1 Gen1 sur le panneau avant.

1 10

1120

1 Power 11 USB2.0+

2 USB3_RX_DN 12 USB2.0-

3 USB3_RX_DP 13 Ground

4 Ground 14 USB3_TX_C_DP

5 USB3_TX_C_DN 15 USB3_TX_C_DN

6 USB3_TX_C_DP 16 Ground

7 Ground 17 USB3_RX_DP

8 USB2.0- 18 USB3_RX_DN

9 USB2.0+ 19 Power

10 NC 20 No Pin

Important

Notez que les cbles dalimentation et de terre doivent tre branchs correctement afin dviter dendommager la carte.

JUSB1: Connecteur USB 2.0 Ce connecteur vous permet de relier des ports USB 2.0 sur le panneau avant.

1

2 10

9

1 VCC 2 VCC

3 USB0- 4 USB1-

5 USB0+ 6 USB1+

7 Ground 8 Ground

9 No Pin 10 NC

Important

y Notez que les broches VCC et Terre doivent tre branches correctement afin dviter tout dommage sur la carte mre.

y Pour recharger votre iPad, iPhone ou iPod par lintermdiaire dun port USB, veuillez installer lutilitaire MSI SUPER CHARGER.

13Vue densemble des composants Vue densemble des composants

CPU_FAN1, SYS_FAN1: Connecteurs pour ventilateurs Les connecteurs pour ventilateurs peuvent tre utiliss en mode PWM (Pulse Width Modulation) et en mode DC. En mode PWM, les connecteurs fournissent une sortie de 12V constante et ajustent la vitesse des ventilateurs avec un signal de contrle de vitesse. En mode DC, les connecteurs contrlent la vitesse des ventilateurs en modifiant la tension. Quand vous branchez un ventilateur 3 broches (Non-PWM) un connecteur de ventilateur de mode PWM, la vitesse sera toujours maintenue 100% et cela occasionnera du bruit. Vous pouvez suivre les instructions ci-dessous pour rgler manuellement le connecteur de ventilateur en mode PWM ou mode DC.

Basculer entre les modes des ventilateurs et ajuster la vitesse Vous pouvez alterner entre le mode PWM et le mode DC et ajuster la vitesse des ventilateurs dans le BIOS > HARDWARE MONITOR.

Choisissez le mode PWM ou le mode DC

Important

Veuillez vous assurer que les ventilateurs fonctionnent correctement aprs avoir bascul entre les modes PWM et DC.

Il y a des points de gradient de la vitesse du ventilateur qui vous permet dajuster la vitesse de ventilateur par rapport la temprature du processeur.

Connecteurs pour ventilateurs en mode PWM par dfaut

Connecteurs pour ventilateurs en mode DC par dfaut

1

CPU_FAN1

1

SYS_FAN1

Dfinition des broches en mode PWM

1 Ground 2 +12V

3 Sense 4 Speed Control Signal

Dfinition des broches en mode DC

1 Ground 2 Voltage Control

3 Sense 4 NC

Dfinition des broches des connecteurs de ventilateur

14 Vue densemble des composants

JCI1: Connecteur intrusion chssis Ce connecteur est reli un cble dinterrupteur intrusion chssis.

Normal

(dfaut)

Commencer lactivit intrusion chssis

Utilisation du dtecteur dintrusion chssis 1. Reliez le connecteur JCI1 linterrupteur ou au capteur dintrusion chssis situ

sur le botier du PC.

2. Fermez le couvercle du botier.

3. Allez dans le BIOS > SETTINGS (Rglages) > Security (Scurit) > Chassis Intrusion Configuration (Configuration intrusion chssis).

4. Rglez Chassis Intrusion (Intrusion chssis) sur Enabled (Activ).

5. Appuyez sur F10 pour sauvegarder et quitter. Ensuite appuyez sur la touche Enter (Entre) pour choisir Yes (Oui).

6. Dsormais, si le botier du PC est ouvert quand lordinateur est allum, vous recevrez un message dalerte lcran.

Rinitialisation de lalerte intrusion chssis 1. Allez dans le BIOS > SETTINGS (Rglages) > Security (Scurit) > Chassis

Intrusion Configuration (Configuration intrusion chssis).

2. Mettez Chassis Intrusion (Intrusion chssis) en Reset (Remettre).

3. Appuyez sur F10 pour sauvegarder et quitter. Ensuite appuyez sur la touche Enter (Entre) pour choisir Yes (Oui).

JAUD1: Connecteur audio avant Ce connecteur se lie aux jacks audio du panneau avant.

1

2 10

9

1 MIC L 2 Ground

3 MIC R 4 NC

5 Head Phone R 6 MIC Detection

7 SENSE_SEND 8 No Pin

9 Head Phone L 10 Head Phone Detection

15Vue densemble des composants Vue densemble des composants

JRGB1~2: Connecteurs de ruban LED Ces connecteurs vous permettent de connecter un ruban LED RGB de type de 5050.

Important

y Ce connecteur supporte des rubans LED RGB (rouge/vert/bleu) de type 5050 avec une puissance nominale maximale de 3A (12V). Veuillez garder la longueur du ruban LED infrieure 2 mtres pour viter la gradation des couleurs.

y Avant dinstaller ou de retirer le ruban LED RGB, veillez toujours teindre lalimentation et dbrancher le cble dalimentation de la prise lectrique.

y Veuillez utiliser un logiciel MSI ddi pour contrler le ruban dextension LED.

JBAT1: Cavalier Clear CMOS (Rinitialisation BIOS) Une mmoire CMOS est intgre et est alimente en externe par une batterie situe sur la carte mre afin de conserver les donnes de configuration systme. Si vous souhaitez nettoyer la configuration systme, placez le cavalier sur Effacer CMOS de manire nettoyer la mmoire CMOS.

Conserver les donnes (dfaut)

Effacer CMOS/ Rinitialiser BIOS

Rinitialiser le BIOS aux valeurs par dfaut 1. Eteignez lordinateur et dbranchez le cble dalimentation de la prise lectrique.

2. Utilisez un couvercle de cavalier pour fermer JBAT1 pour environ 5-10 secondes.

3. Enlevez le couvercle de cavalier du JBAT1.

4. Branchez de nouveau le cble dalimentation votre ordinateur et allumez-le.

1

1 +12V 2 G

3 R 4 B 1

JRGB1/ 2

ruban LED de type 5050

EZ Debug LED: Indicateurs LED de dbogage Ces LEDs indiquent ltat de la carte mre.

BOOT VGA DRAM CPU

BOOT - indique que le priphrique de dmarrage nest pas dtect ou que son initialisation a chou.

VGA - indique que le GPU nest pas dtect ou que son initialisation a chou.

DRAM - indique que la mmoire DRAM nest pas dtecte ou que son initialisation a chou.

CPU - indique que le CPU nest pas dtect ou que son initialisation a chou.

16 Conguration du BIOS

Configuration du BIOS Les rglages par dfaut fournissent une performance optimale pour la stabilit du systme en conditions normales. Veillez toujours garder les rglages par dfaut pour viter dendommager le systme ou tout problme au dmarrage, sauf si vous tes familier avec le BIOS.

Important

y Le BIOS est constamment mis jour afin doffrir de meilleures performances systme. Par consquent, la description peut diffrer selon la version de BIOS utilise et nest donc donne qu titre de rfrence. Vous pouvez aussi vous rfrer longlet Help (Aide) pour obtenir la description des fonctions du BIOS.

y Les photos ne sont donnes qu titre de rfrence et peuvent varier selon le produit que vous achetez.

y Les lments du BIOS peuvent varier selon le processeur.

Entrer dans linterface Setup du BIOS Pendant le dmarrage, lorsquapparat le message Press DEL key to enter Setup Menu, F11 to enter Boot Menu sur lcran, veuillez appuyer sur la touche Suppr.

Touches de fonction F1: Aide gnrale

F2: Ajouter ou supprimer un lment favori

F3: Entrer dans le menu Favoris

F4: Entrer dans le menu de rglages du processeur

F5: Entrer dans le menu Memory-Z

F6: Charger les rglages par dfaut

F7: Alterner entre le mode avanc et le mode simplifi

F8: Charger le profil doverclocking

F9: Sauvegarder le profil doverclocking

F10: Sauvegarder les modifications et rglages*

F12: Prendre une capture dcran et la conserver dans le lecteur flash USB (au format FAT/ FAT32 uniquement).

* Lorsque vous appuyez sur F10, une fentre de confirmation apparat et fournit linformation de modification. Choisissez entre Oui et Non pour confirmer.

17Conguration du BIOS Conguration du BIOS

Rinitialiser le BIOS Il se peut que vous ayez besoin de rcuprer les rglages BIOS par dfaut pour rsoudre des problmes. Pour rinitialiser les rglages du BIOS, veuillez suivre lune des mthodes suivantes :

y Allez dans le Setup du BIOS et appuyez sur F6 pour charger les rglages par dfaut.

y Court-circuitez le cavalier Clear CMOS sur la carte mere.

Important

Veuillez vous rfrer la section Cavalier Clear CMOS pour en savoir plus sur la rinitialisation du BIOS.

Mettre le BIOS jour

Mettre le BIOS jour avec M-FLASH Avant la mise jour :

Veuillez tlcharger la dernire version de BIOS compatible votre carte mre sur le site MSI. Ensuite, veuillez sauvegarder le nouveau BIOS sur le lecteur flash USB.

Mettre le BIOS jour:

1. Appuyez sur la touche Suppr pour entrer dans linterface Setup du BIOS pendant le processus de POST.

2. Connectez le lecteur Flash USB contenant le profil lordinateur.

3. Choisissez longlet M-FLASH et cliquez sur Yes (Oui) pour redmarrer le systme et entrer dans le mode Flash.

4. Choisissez un profil BIOS pour commencer la mise jour du BIOS.

5. Une fois la mise jour termine, le systme redmarrera automatiquement.

Mettre le BIOS jour avec Live Update 6 Avant la mise jour :

Assurez-vous que le lecteur LAN est bien install et que lordinateur est correctement connect internet.

Mettre le BIOS jour :

1. Installez et lancez MSI LIVE UPDATE 6.

2. Choisissez BIOS Update (Mettre le BIOS jour).

3. Cliquez sur le bouton Scan.

4. Cliquez sur licne Download pour tlcharger et installer la dernire version du BIOS.

5. Cliquez sur Next (Suivant) et choisissez le mode In Windows. Ensuite, cliquez sur Next (Suivant) et Start (Commencer) pour lancer la mise jour du BIOS.

6. Une fois la mise jour termine, le systme redmarrera automatiquement.

18 Informations sur les logiciels

Informations sur les logiciels Veuillez vous rfrer au site www.msi.com pour tlcharger et mettre jour les derniers utilitaires et pilotes.

Installer Windows 7 64-bit/ Windows 10 64-bit 1. Allumez lordinateur.

2. Insrez le disque de Windows 7/ 10 dans le lecteur optique.

Remarque : Du fait des limites du chipset pendant linstallation de Windows 7, les lecteurs optiques USB et les cls USB ne seront pas supports. Vous pouvez utiliser MSI Smart Tool pour installer Windows 7.

3. Appuyez sur le bouton Restart du botier de lordinateur.

4. Appuyez sur la touche F11 pendant le POST (Power-On Self Test) du systme pour entrer dans le menu Boot Menu.

5. Choisissez le lecteur optique du Boot Menu.

6. Appuyez sur nimporte quelle touche lorsquapparat le message (Press any key to boot from CD or DVD).

7. Suivez les instructions lcran pour installer Windows 7/ 10.

Installer les pilotes 1. Allumez lordinateur sous Windows 7/ 10.

2. Insrez le disque MSI Driver Disc dans le lecteur optique.

3. Loutil dinstallation apparat automatiquement. Il trouvera et listera tous les pilotes dont vous avez besoin.

4. Cliquez sur le bouton Install.

5. Linstallation des pilotes commence. Une fois termine, il vous sera demand de redmarrer.

6. Cliquez sur le bouton OK pour terminer.

7. Redmarrez votre ordinateur.

Installer les utilitaires Avant dinstaller les utilitaires, il faut complter linstallation des pilotes.

1. Insrez le disque MSI Driver Disc dans le lecteur optique.

2. Loutil dinstallation apparat automatiquement.

3. Cliquez sur longlet Utilities.

4. Choisissez les utilitaires que vous voulez installer.

5. Cliquez sur le bouton Install.

6. Linstallation des utilitaires commence. Une fois termine, il vous sera demand de redmarrer.

7. Cliquez sur le bouton OK pour terminer.

8. Redmarrez votre ordinateur.

1< 1> Inhalt

Inhalt Sicherheitshinweis ..........................................................................................2

Spezifikationen ................................................................................................3

Rckseite E/A ..................................................................................................6 LAN Port LED Zustandstabelle ...........................................................................6

bersicht der Komponenten ...........................................................................7 CPU Sockel..........................................................................................................8 DIMM-Steckpltze ..............................................................................................9 PCI_E1: PCIe Erweiterungssteckpltze .............................................................9 JFP1, JFP2: Frontpanel-Anschlsse ................................................................10 SATA1~4: SATA 6Gb/s Anschlsse ...................................................................10 ATX_PWR1, CPU_PWR1: Stromanschlsse .....................................................11 JUSB1: USB 2.0 Anschluss ...............................................................................12 JUSB2: USB 3.1 Gen1 Anschluss......................................................................12 CPU_FAN1, SYS_FAN1: Stromanschlsse fr Lfter ......................................13 JCI1: Gehusekontaktanschluss ......................................................................14 JAUD1: Audioanschluss des Frontpanels ........................................................14 JRGB1~2: LED-Streifen Anschluss ..................................................................15 JBAT1: Clear CMOS Steckbrcke (Reset BIOS)................................................15 EZ Debug LED: Debug LED-Anzeigen ..............................................................15

BIOS-Setup ....................................................................................................16 ffnen des BIOS Setups ....................................................................................16 Reset des BIOS .................................................................................................17 Aktualisierung des BIOS ...................................................................................17

Softwarebeschreibung ..................................................................................18 Installation von Windows 7 64-Bit/ Windows10 64-Bit.................................18 Installation von Treibern ...................................................................................18 Installation von Utilities ....................................................................................18

Danke, dass Sie sich fr das MSI A320I PRO AC/ B350I PRO AC/ B350I-S01 Motherboard entschieden haben. Dieses Handbuch gibt informationen ber Motherboard-Layout, Komponentenbersicht, BIOS-Setup und Software.

2 Sicherheitshinweis

Sicherheitshinweis y Die im Paket enthaltene Komponenten sind der Beschdigung durch

elektrostatischen Entladung (ESD). Beachten Sie bitte die folgenden Hinweise, um die erfolgreichen Computermontage sicherzustellen.

y Stellen Sie sicher, dass alle Komponenten fest angeschlossen sind. Lockere Steckverbindungen knnen Probleme verursachen, zum Beispiel: Der Computer erkennt eine Komponente nicht oder startet nicht.

y Halten Sie das Motherboard nur an den Rndern fest, und verhindern Sie die Berhrung der sensiblen Komponenten.

y Um eine Beschdigung der Komponenten durch elektrostatische Entladung (ESD) zu vermeiden, sollten Sie eines elektrostatischen Armbands whrend der Handhabung des Motherboards tragen. Wenn kein elektrostatischen Handgelenkband vorhanden ist, sollten Sie Ihre statische Elektrizitt ableiten, indem Sie ein anderes Metallobjekt berhren, bevor Sie das Motherboard anfassen.

y Bewahren Sie das Motherboard in einer elektrostatische Abschirmung oder einem Antistatiktuch auf, wenn das Motherboard nicht installiert ist.

y berprfen Sie vor dem Einschalten des Computers, dass sich keine losen Schrauben und andere Bauteile auf dem Motherboard oder im Computergehuse befinden.

y Bitte starten Sie den Computer nicht, bevor die Installation abgeschlossen ist. Dies knnte permanente Schden an den Komponenten sowie zu das Verletzung des Benutzers verursachen.

y Sollten Sie Hilfe bei der Installation bentigen, wenden Sie sich bitte an einen zertifizierten Computer-Techniker.

y Schalten Sie die Stromversorgung aus und ziehen Sie das das Stromkabel ab, bevor Sie jegliche Computer-Komponente ein- und ausbauen.

y Bewahren Sie die Bedienungsanleitung als knftige Referenz auf.

y Halten Sie das Motherboard von Feuchtigkeit fern.

y Bitte stellen Sie sicher, dass Ihre Netzspannung den Hinweisen auf dem Netzteil vor Anschluss des Netzteils an die Steckdose entspricht.

y Verlegen Sie das Netzkabel so, dass niemand versehentlich darauf treten kann. Stellen Sie nichts auf dem Netzkabel ab.

y Alle Achtungs- und Warnhinweise auf dem Motherboard mssen befolgt werden.

y Falls einer der folgenden Umstnde eintritt, lassen Sie bitte das Motherboard von Kundendienstpersonal prfen:

Flssigkeit ist in dem Computer eingedrungen.

Das Motherboard wurde Feuchtigkeit ausgesetzt.

Das Motherboard funktioniert nicht richtig oder Sie knnen es nicht wie in der Bedienungsanleitung beschrieben bedienen.

Das Motherboard ist heruntergefallen und beschdigt.

Das Motherboard weist offensichtlich Zeichen eines Schadens auf.

y Nutzen und lagern Sie das Gert nicht an Stellen, an denen Temperaturen von mehr als 60C herrschen - das Motherboard kann in diesem Fall Schaden nehmen.

3Sicherheitshinweis Spezikationen

Spezifikationen

CPU Untersttzt AMD Ryzen 1. und 2. Generation Prozessoren/ Ryzen Prozessoren mit Radeon Vega Grafikprozessor / Athlon Prozessoren mit Radeon Vega Grafikprozessor und A-Serie/ Athlon X4 Prozessoren fr Sockel AM4.

Chipsatz AMD A320/ B350 Chipsatz

Speicher

y 2x DDR4 Speicherpltze, aufrstbar bis 32GB

Untersttzt DDR4 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/ 3200(OC)+ MHz*

y Dual-Kanal-Speicherarchitektur

y Untersttzt ECC UDIMM-Speicher (non-ECC Modus)

y Untersttzt non-ECC UDIMM-Speicher

* A-Serie / Athlon X4 Prozessoren nur untersttzt bis zu 2400 MHz. Weitere Informationen zu kompatiblen Speicher finden Sie unter: http://www.msi.com

Erweiterung- anschlsse

y 1x PCIe 3.0 x16-Steckplatz

Ryzen Serie Prozessoren untersttzen den Modus x16

Ryzen Prozessoren mit Radeon Vega Grafikprozessor und A-Serie/ Athlon X4 Prozessoren untersttzen den Modus x8

Athlon Prozessoren mit Radeon Vega Grafikprozessor untersttzen den Modus x4

Onboard-Grafik

y 1x DisplayPort 1.2 Anschluss, Untersttzung einer maximalen Auflsung von 4096x2160@60Hz* (B350I PRO-AC/ A320I PRO-AC)

y 1x HDMI 1.4 Anschluss, Untersttzung einer maximalen Auflsung von 4096x2160@24Hz* (B350I PRO-AC/ A320I PRO-AC) * Diese Funktion wird nur bei der Verwendung von Ryzen Prozessoren mit Radeon Vega Grafikprozessor/ Athlon mit Radeon Vega Grafikprozessor und A-Serie Prozessoren untersttzt..

Aufbewahrung

AMD A320/ B350 Chipsatz

y 4x SATA 6Gb/s Anschlsse

Untersttzt RAID 0, RAID1 und RAID 10

y Der M.2 Anschluss (M2_1) x1, untersttzt PCIe 3.0 x 4 (Ryzen Serie Prozessoren) oder PCIe 3.0 x2 (Athlon Prozessoren mit Radeon Vega Grafikprozessor und A-Serie / Athlon X4 Prozessoren) und SATA 6Gb/s, 2280 Speichergert

Fortsetzung auf der nchsten Seite

4 Spezikationen

Fortsetzung der vorherigen Seite

Audio y Realtek ALC887 Codec

y 7.1-Kanal-HD-Audio

LAN 1x Realtek 8111H Gigabit LAN Controller

Wireless LAN & Bluetooth

Intel Dualband Wireless-AC 3168 Modul (B350I PRO-AC/ A320I PRO-AC)

y Der Wireless-Modul ist im M2_2 (Key E)-Steckplatz vorinstalliert.

y Untersttzt Wi-Fi 1x1 802.11ac, Dualband (2,4 GHz, 5 GHz) mit Datenraten von bis zu 433 Mbps.

y Untersttzt Bluetooth 4.2, 4.1, BLE, 4.0, 3.0, 2.1, 2.1+EDR

USB

y 2x USB 3.1 Gen2 (SuperSpeed USB 10Gbps) Anschlsse an der rckseitigen Anschlussleiste (B350I PRO-AC/ B350I-S01)

y 4x USB 3.1 Gen1 (SuperSpeed USB) Anschlsse (2 Anschlsse an der rckseitigen Anschlussleiste, 2 Anschlsse stehen durch die internen USB Anschlsse zur Verfgung)

y 4x USB 2.0 (High-speed USB) Anschlsse (2 Anschlsse an der rckseitigen Anschlussleiste, 2 Anschlsse stehen durch die internen USB Anschlsse zur Verfgung)

Hintere Ein-/ und Ausgnge

y 1x PS/2 Maus- / Tastatur-Combo-Anschluss

y 2x USB 2.0 Typ-A Anschlsse

y 1x DisplayPort Anschluss (A320I PRO AC/ B350I PRO AC)

y 1x HDMI Anschluss (A320I PRO AC/ B350I PRO AC)

y 2x USB 3.1 Gen2 Typ-A Anschlsse (B350I PRO AC/ B350I-S01)

y 1x LAN (RJ45) Anschluss

y 2x USB 3.1 Gen1 Typ-A Anschlsse

y 2x WiFi Antennenanschlsse (A320I PRO AC/ B350I PRO AC)

y 3x Audiobuchsen

Fortsetzung auf der nchsten Seite

5Spezikationen Spezikationen

Fortsetzung der vorherigen Seite

Interne Anschlsse

y 1x 24-poliger ATX Stromanschluss

y 1x 8-poliger ATX 12V Stromanschluss

y 4x SATA 6Gb/s Anschlsse

y 1x USB 2.0 Anschluss (untersttzt zustzliche 2 USB 2.0 -Ports)

y 1x USB 3.1 Gen1 Anschluss (untersttzt zustzliche 2 USB 3.1 Gen1-Ports)

y 1x 4-poliger CPU-Lfter-Anschluss

y 1x 4-poliger System-Lfter-Anschluss

y 1x Audioanschluss des Frontpanels

y 2x Frontpanel-Anschlsse

y 1x Gehusekontaktschalter

y 2x LED-Streifen Anschlsse

y 1x Clear CMOS Steckbrcke

E/A Anschluss NUVOTON 6795D Controller Chip

Hardware Monitor

y CPU/System Temperaturerfassung

y CPU/System Geschwindigkeitserfassung

y CPU/System Lfterdrehzahlregelung

Formfaktor y Mini-ITX Formfaktor

y 6,7 Zoll x 6,7 Zoll (17,0 cm x 17,0 cm)

BIOS Funktionen

y 1x 128 Mb Flash

y UEFI AMI BIOS

y ACPI 5.0, SM BIOS 3.0

y Mehrsprachenuntersttzung

Software

y Treiber

y SUPER CHARGER

y COMMAND CENTER

y LIVE UPDATE 6

y MYSTIC LIGHT

y NETWORK GENIE

y MSI SMART TOOL

y X-BOOST

y RAMDISK

y Norton Security

y Google Chrome, Google Toolbar, Google Drive

y CPU-Z MSI GAMING

6 Rckseite E/A

Rckseite E/A

Audio 7.1-Kanal Konfiguration Um 7.1-Kanal-Audio zu konfigurieren, mssen Sie den Front-Audio-Anschluss mit dem JAUD1 Anschluss verbinden und folgen Sie die untenstehenden Schritten.

1. Klicken Sie auf Realtek HD Audio Manager > Advanced Settings, um das Dialogfeld zu ffnen.

2. Whlen Sie Mute the rear output device (die rckseitigen Ausgnge stumm schalten) aus, wenn ein Front-Kopfhrer eingesteckt wird.

3. Schlieen Sie Ihre Lautsprecher an die Ausgangsbuchsen auf der Rckseite und am Frontpanel an. Nach dem Anschluss eines Audio-Klinkensteckers erscheint ein Dialogfenster und fragt nach einer Besttigung fr das angeschlossene Gert.

PS/2

LAN USB 2.0

(B350I PRO AC & B350I-S01) USB 3.1 Gen2

USB 3.1 Gen1

DisplayPort

Line-In

Line-Out

Mic In

Wi-Fi Antennenanschlsse

Verbindung/ Aktivitt LED

Zustand Bezeichnung

Aus Keine Verbindung

Gelb Verbindung

Blinkt Datenaktivitt

Geschwindigkeit LED

Zustand Bezeichnung

Aus 10 Mbps-Verbindung

Grn 100 Mbps-Verbindung

Orange 1 Gbps-Verbindung

LAN Port LED Zustandstabelle

(A320I PRO AC & B350I PRO AC) (A320I PRO AC & B350I PRO AC)

(A320I PRO AC & B350I PRO AC)

7Rckseite E/A bersicht der Komponenten

bersicht der Komponenten

M2_1

Draufsicht

Unteransicht

SYS_FAN1 EZ Debug LED CPU_FAN1

JUSB2

ATX_PWR1

JUSB1

CPU Sockel

JFP2

JFP1 PCI_E1

JAUD1 JRGB2

JRGB1

DIMMA1

DIMMB1

JBAT1

CPU_PWR1

SA TA

3 / S

AT A4

SA TA

1 / S

AT A2

8 bersicht der Komponenten

CPU Sockel Installieren Sie bitte die CPU in den CPU Sockel, wie unten aufgezeigt.

Wichtig

y Bei einem Wechsel des Prozessors sollte aufgrund der AM4-Prozessorarchitektur die Systemkonfiguration gelscht und das BIOS auf die Standardwerte zurckgesetzt werden.

y Ziehen Sie das Netzkabel ab, bevor Sie die CPU ein- und ausbauen. y Wenn Sie die CPU einbauen, denken sie bitte daran einen CPU-Khler zu

installieren. Ein CPU-Khlkrper ist notwendig, um eine berhitzung zu vermeiden und die Systemstabilitt beizubehalten.

y Stellen Sie sicher, dass Ihr Khlkrper eine feste Verbindung mit der CPU hergestellt hat, bevor Sie Ihr System starten.

y berhitzung beschdigt die CPU und das System nachhaltig. Stellen Sie stets eine korrekte Funktionsweise des CPU Khlers sicher, um die CPU vor berhitzung zu schtzen. Stellen Sie sicher, dass eine gleichmige Schicht thermischer Paste oder thermischen Tapes zwischen der CPU und dem Khlkrper vorhanden ist, um die Wrmeableitung zu erhhen.

y Verwenden Sie bitte die Installationsanweisung des Khlkrpers/Khlers, falls Sie eine seperate CPU oder einen Khlkrper/ Khler erworben haben.

1

3

5

4

6

7

8

2

9bersicht der Komponenten bersicht der Komponenten

DIMM-Steckpltze Setzen Sie bitte ein Speichermodul wie untern gezeigt in den DIMM-Steckplatz ein.

Wichtig

y Aufgrund der Chipsatzressourcennutzung wird die verfgbare Kapazitt des Speichers kleiner sein als die Gre der installierten Speicherkapazitt.

y Basierend auf der Prozessorspezifikation wird eine Speicherspannung unter 1,35 Volt vorgeschlagen, um der Prozessor zu schtzen.

y Speichermodule knnen auf Basis der offizielle Spezifikation des AM4 Prozessors/ Speicher-Controllers mit einer niedrigeren Frequenz unter dem Standardzustand arbeiten. Weitere Informationen zu kompatiblen Speichermodulen finden Sie unter: http://www.msi.com.

PCI_E1: PCIe Erweiterungssteckpltze

PCI_E1

Wichtig

y Achten Sie darauf, dass Sie den Strom abschalten und das Netzkabel aus der Steckdose herausziehen, bevor Sie eine Erweiterungskarte installieren oder entfernen. Lesen Sie bitte auch die Dokumentation der Erweiterungskarte, um notwendige zustzliche Hardware oder Software-nderungen zu berprfen.

y Wenn Sie eine groe und schwere Grafikkarte einbauen, bentigen Sie einen Grafikkarten-Stabilisator (Graphics Card Bolster) der das Gewicht trgt und eine Verformung des Steckplatzes vermeidet.

1 2 3

2

Prozessor

Steckplatz Ryzen Serie

Ryzen Prozessoren mit Radeon Vega

Grafikprozessor und A-Serie / Athlon X4

Prozessoren

Athlon Prozessoren mit Radeon Vega

Grafikprozessor

PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4

10 bersicht der Komponenten

SATA1~4: SATA 6Gb/s Anschlsse Dieser Anschluss basiert auf der Hochgeschwindigkeitsschnittstelle SATA 6Gb/s. Pro Anschluss kann ein SATA Gert angeschlossen werden.

SATA1

SATA2 SATA3

SATA4

Wichtig

y Knicken Sie das SATA-Kabel nicht in einem 90 Winkel. Datenverlust knnte die Folge sein.

y SATA-Kabel haben identische Stecker an beiden Enden. Es wird empfohlen den flachen Stecker auf dem Motherboard einstecken.

JFP1, JFP2: Frontpanel-Anschlsse Diese Anschlsse verbinden die Schalter und LEDs des Frontpanels.

1

2 10

9

JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED -

5 Reset Switch 6 Power Switch

7 Reset Switch 8 Power Switch

9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

JFP1

11bersicht der Komponenten bersicht der Komponenten

ATX_PWR1, CPU_PWR1: Stromanschlsse Mit diesen Anschlssen verbinden Sie die ATX Stromstecker.

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V

2 +3.3V 14 -12V

3 Ground 15 Ground

4 +5V 16 PS-ON#

5 Ground 17 Ground

6 +5V 18 Ground

7 Ground 19 Ground

8 PWR OK 20 Res

9 5VSB 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 +3.3V 24 Ground

5

4 1

8

CPU_PWR1

1 Ground 5 +12V

2 Ground 6 +12V

3 Ground 7 +12V

4 Ground 8 +12V

Wichtig

Stellen Sie sicher, dass alle Anschlsse mit den richtigen Anschlssen des Netzteils verbunden sind, um einen stabilen Betrieb der Hauptplatine sicherzustellen.

12 bersicht der Komponenten

JUSB2: USB 3.1 Gen1 Anschluss Mit diesem Anschluss knnen Sie den USB 3.1 Gen1 Anschluss auf dem Frontpanel verbinden.

1 10

1120

1 Power 11 USB2.0+

2 USB3_RX_DN 12 USB2.0-

3 USB3_RX_DP 13 Ground

4 Ground 14 USB3_TX_C_DP

5 USB3_TX_C_DN 15 USB3_TX_C_DN

6 USB3_TX_C_DP 16 Ground

7 Ground 17 USB3_RX_DP

8 USB2.0- 18 USB3_RX_DN

9 USB2.0+ 19 Power

10 NC 20 No Pin

Wichtig

Bitte beachten Sie, dass Sie die mit Stromfhrende Leitung und Erdleitung bezeichneten Pins korrekt verbinden mssen, ansonsten kann es zu Schden kommen.

JUSB1: USB 2.0 Anschluss Mit diesem Anschluss knnen Sie die USB 2.0 Anschlsse auf dem Frontpanel verbinden.

1

2 10

9

1 VCC 2 VCC

3 USB0- 4 USB1-

5 USB0+ 6 USB1+

7 Ground 8 Ground

9 No Pin 10 NC

Wichtig

y Bitte beachten Sie, dass Sie die mit VCC (Stromfhrende Leitung) und Ground (Erdleitung) bezeichneten Pins korrekt verbinden mssen, ansonsten kann es zu Schden kommen.

y Um das iPad, iPhone und den iPod ber USB-Anschlsse aufzuladen, installieren Sie bitte die MSI SUPER CHARGER Software.

13bersicht der Komponenten bersicht der Komponenten

CPU_FAN1, SYS_FAN1: Stromanschlsse fr Lfter FDiese Anschlsse knnen im PWM (Pulse Width Modulation) Modus oder DC- Modus betrieben werden. Im PWM-Modus bieten die Lfteranschlsse konstante 12V Ausgang und regeln die Lftergeschwindigkeit per Drehzahlsteuersignal. Im DC-Modus bestimmen die Lfteranschlsse die Lftergeschwindigkeit durch ndern der Spannung. Wenn Sie einen 3-Pin (Non-PWM) Lfter an einen PWM-Modus Lfteranschluss anschlieen, luft der Lfter mit hchster Drehzahl und kann unangenehm laut werden. Folgen Sie den folgenden Anweisungen, um den PWM- oder DC-Modus auszuwhlen.

Umschalten des Lfter-Modus und Anpassung der Lfterdrehzahl Sie knnen unter BIOS > HARDWARE MONITOR zwischen dem PWM- und DC-Modus umschalten und die Lfterdrehzahl ndern.

Whlen Sie den PWM- oder DC-Modus aus

Wichtig

berprfen Sie die ordnungsgeme Funktion der Lfter nach dem Umschalten des PWM-/ DC-Modus.

Die Gradientenpunkte des Lfterverlaufs erlauben die Anpasssung der Lfterdrehzahl in Abhngigkeit von der CPU-Temperatur.

Lfteranschluss des Standard- PWM-Modus

Lfteranschluss des Standard-DC-Modus

1

CPU_FAN1

1

SYS_FAN1

Pin-Belegung des PWM-Modus

1 Ground 2 +12V

3 Sense 4 Speed Control Signal

Pin-Belegung des DC-Modus

1 Ground 2 Voltage Control

3 Sense 4 NC

Pin-Belegung der Lfteranschlsse

14 bersicht der Komponenten

JCI1: Gehusekontaktanschluss Dieser Anschluss wird mit einem Kontaktschalter verbunden.

Normal

(Standardwert)

Lse den Gehuseeingriff aus

Gehusekontakt-Detektor verwenden 1. Schlieen Sie den JCI1-Anschluss am Gehusekontakt-Schalter/ Sensor am

Gehuse an.

2. Schlieen Sie die Gehuseabdeckung.

3. Gehen Sie zu BIOS > SETTINGS > Security > Chassis Intrusion Configuration.

4. Stellen Sie Chassis Intrusion auf Enabled.

5. Drcken Sie F10 zum Speichern und Beenden und drcken Sie dann die Enter- Taste, um Ja auszuwhlen.

6. Bei eingeschaltetem Computer wird eine Warnmeldung auf dem Bildschirm angezeigt, wenn die Gehuseabdeckung wieder geffnet wird.

Gehusekontakt-Warnung zurcksetzen 1. Gehen Sie zu BIOS > SETTINGS > Security > Chassis Intrusion Configuration.

2. Stellen Sie Chassis Intrusion auf Reset.

3. Drcken Sie F10 zum Speichern und Beenden und drcken Sie dann die Enter- Taste, um Ja auszuwhlen.

JAUD1: Audioanschluss des Frontpanels Dieser Anschluss ermglicht den Anschluss von Audiobuchsen eines Frontpanels.

1

2 10

9

1 MIC L 2 Ground

3 MIC R 4 NC

5 Head Phone R 6 MIC Detection

7 SENSE_SEND 8 No Pin

9 Head Phone L 10 Head Phone Detection

15bersicht der Komponenten bersicht der Komponenten

JRGB1~2: LED-Streifen Anschluss Mit diesen Anschlsse knnen Sie den 5050 RGB LED-Streifen anschlieen.

Wichtig

y Dieser Anschluss untersttzt die RGB Mehr-Farb-LED-Streifen (12V/G/R/B) mit der maximalen Leistung von 3A (12V). Beachten Sie bitte, dass die Lnge des LED-Streifens maximal 2 Meter betragen darf um eine Verdunkelung der LED zu verhindern.

y Schalten Sie die Stromversorgung aus und ziehen Sie das Netzkabel ab, bevor Sie die RGB-LED-Streifen ein- und ausbauen.

y Bitte verwenden Sie die MSI-Software zur Steuerung des LED-Leuchtstreifens.

JBAT1: Clear CMOS Steckbrcke (Reset BIOS) Der Onboard CMOS Speicher (RAM) wird durch eine externe Spannungsversorgung durch eine Batterie auf dem Motherboard versorgt, um die Daten der Systemkonfiguration zu speichern. Wenn Sie die Systemkonfiguration lschen wollen, mssen Sie die Steckbrcke fr kurze Zeit umsetzen.

Daten beibehalten (Standardwert)

CMOS-Daten lschen/ Reset des BIOS

Rcksetzen des BIOS auf Standardwerte 1. Schalten Sie den Computer ab und ziehen Sie das Netzkabel ab.

2. Verwenden Sie eine Steckbrcke, um JBAT1 fr 5-10 Sekunden kurzzuschlieen.

3. Entfernen Sie die Steckbrcke von JBAT1.

4. Stecken Sie das Kabel Ihres Computers in die Steckdose hinein und schalten Sie den Computer ein.

EZ Debug LED: Debug LED-Anzeigen Diese LEDs zeigen den Status des Motherboards an.

BOOT VGA DRAM CPU

BOOT - Boot-Gert wird nicht erkannt oder ist fehlerhaft.

VGA - GPU wird nicht erkannt oder ist fehlerhaft.

DRAM - DRAM wird nicht erkannt oder ist fehlerhaft.

CPU - CPU wird nicht erkannt oder ist fehlerhaft.

1

1 +12V 2 G

3 R 4 B 1

JRGB1/ 2

5050 LED Streifen

16 BIOS-Setup

BIOS-Setup Die Standardeinstellungen bieten die optimale Leistung fr die Systemstabilitt unter Normalbedingungen. Sie sollten immer die Standardeinstellungen behalten, um mgliche Schden des Systems oder Boot-Fehler zu vermeiden, auer Sie besitzen ausreichende BIOS Kenntnisse.

Wichtig

y BIOS Funktionen werden fr eine bessere Systemleistung kontinuierlich aktualisiert. Deswegen knnen die Beschreibungen leicht von der letzten Fassung des BIOS abweichen und sollten demnach nur als Anhaltspunkte dienen. Fr eine Beschreibung der BIOS Funktionen rufen Sie die HELP Informationstafel aus.

y Die Bilder in diesem Kapitel stellen lediglich Referenzen dar und knnen von dem von Ihnen erworbenen Produkt abweichen.

y Die BIOS-Funktion variiert je nach dem Prozessor.

ffnen des BIOS Setups Whrend des BOOT-Vorgangs drcken Sie die Taste Delete, wenn die Meldung Press DEL key to enter Setup Menu, F11 to enter Boot Menu erscheint.

Funktionstasten F1: Allgemeine Hilfe

F2: Hinzufgen/Entfernen eines Favoritenpunkts

F3: ffnen des Favoriten Mens

F4: ffnen des Mens CPU-Spezifikationen

F5: ffnen des Memory-Z Mens

F6: Laden der ursprnglichen Setup-Standardwerte

F7: Wechselt zwischen dem Erweiterten-Modus und EZ-Modus

F8: OC-Profil wird vom USB-Stick geladen

F9: OC-Profil wird auf einem USB-Stick gespeichert

F10: Speichern oder Zurcksetzen der nderungen*

F12: Macht einen Screenshot und speichert auf einen FAT/FAT32-USB-Laufwerk.

* Beim Drcken der F10 Taste wird das Fenster zum Speichern der Einstellungen angezeigt. Whlen Sie Yes, um die Wahl zu besttigen, oder No, um die derzeitige Einstellung beizubehalten.

17BIOS-Setup BIOS-Setup

Reset des BIOS Sie knnen die Werkseinstellung wieder herstellen, um bestimmte Probleme zu lsen. Es gibt verschiedene Mglichkeiten, um das BIOS zurckzusetzen:

y ffnen Sie das BIOS und drcken Sie F6, um optimierten Einstellungen zu laden.

y Schlieen Sie die Clear CMOS Steckbrcke an das Motherboard an.

Wichtig

Bitte lesen Sie fr Informationen zum BIOS-Reset im Bereich Clear CMOS Steckbrcke nach.

Aktualisierung des BIOS

Aktualisierung des BIOS mit dem M-FLASH-Programm Vorbereitung:

Laden Sie bitte die neueste BIOS Version, die dem Motherboard-Modell entspricht, von der ofziellen MSI Website herunter und speichern Sie die BIOS-Datei auf USB- Flash-Laufwerk.

BIOS-Aktualisierungsschritte:

1. Drcken Sie whrend des POST-Vorgangs die Taste (Entf), um das BIOS zu ffnen.

2. Schlieen das USB-Flashlaufwerk mit der BIOS-Datei an den Computer.

3. Whlen Sie die Registerkarte M-FLASH und klicken Sie auf Yes (Ja), um das System neu zu starten. Rufen Sie den Flash-Modus auf.

4. Whlen Sie die BIOS-Datei zur Durchfhrung des BIOS-Aktualisierungsprozesses aus.

5. Nachdem das Flashen des BIOS vollstndig ist, startet das System automatisch neu.

Aktualisierung des BIOS mit Live Update 6 Vorbereitung:

Stellen Sie sicher, dass zuvor die LAN-Treiber installiert wurden und eine Internetverbindung eingerichtet ist.

BIOS-Aktualisierungsschritte:

1. Installieren und starten Sie MSI LIVE UPDATE 6.

2. Whlen Sie BIOS Update aus.

3. Klicken Sie auf die Scan Taste.

4. Klicken Sie auf dieses Download-Icon, um die neueste BIOS-Datei zu laden und zu installieren.

5. Klicken Sie auf Next (Weiter) und whlen Sie In Windows Mode aus. Und klicken dann auf Next (Weiter) und Start (Starten), um das BIOS-Update zu starten.

6. Nachdem das Flashen des BIOS vollstndig ist, startet das System automatisch neu.

18 Softwarebeschreibung

Softwarebeschreibung Laden Sie die neuesten Treiber und Dienstprogramme von www.msi.com herunter und aktualisieren Sie sie.

Installation von Windows 7 64-Bit/ Windows10 64-Bit 1. Schalten Sie den Computer ein.

2. Legen Sie die Windows 7/ 10 Disk in das optisches Laufwerk. Hinweis: Auf Grund einer Chipsatz-Limitierung werden whrend des Windows 7 Installationsprozesses keine optischen Laufwerke und USB-Laufwerke oder USB-Sticks untersttzt.Zur einfachen Windows 7-Installation knnen Sie das MSI Smart Tool verwenden.

3. Drcken Sie die Taste Restart auf dem Computergehuse. 4. Drcken Sie die F11-Taste whrend des POST-Vorgangs (Power-On Self Test), um

das Bootmenu zu ffnen. 5. Whlen Sie das optische Laufwerk aus dem Bootmenu.

6. Wenn eine entsprechende Meldung Press any key to boot from CD or DVD... angezeigt wird, drcken Sie eine beliebige Taste.

7. Folgen Sie den Anweisungen auf dem Bildschirm, um das Dienstprogramm Windows 7/10 zu installieren.

Installation von Treibern 1. Starten Sie Ihren Computer mit Windows 7/ 10.

2. Legen Sie die MSI Treiber Disk in das optisches Laufwerk. 3. Der Installer wird automatisch erscheint und findet und finden Sie die bentigten

Treiber in die Liste.

4. Klicken Sie auf Install. 5. Die Software-Installation ist im Gange. Wenn die Installation abgeschlossen ist,

werden Sie dazu aufgefordet, den Computer neu zu starten. 6. Klicken Sie auf OK zum Beenden. 7. Starten Sie Ihren Computer neu.

Installation von Utilities Bevor Sie Anwendungen installieren, mssen Sie die Treiber-Installation vollstndig beendet haben.

1. Legen Sie die MSI Treiber Disk in das optisches Laufwerk. 2. Der Installer wird automatisch erscheint. 3. Klicken Sie auf Utilities. 4. Whlen Sie die Dienstprogramme, die installiert werden soll. 5. Klicken Sie die Taste Install. 6. Die Utilities-Installation ist im Gange. Wenn die Installation abgeschlossen ist,

werden Sie dazu aufgefordet, den Computer neu zu starten. 7. Klicken Sie auf OK zum Beenden. 8. Starten Sie Ihren Computer neu.

1< 1>

................................................2

..................................................................3

/ ..................................................6 LAN ...............................................6

...........................................................7 .......................................................................................8 DIMM .......................................................................................................9 PCI_E1: PCIe ...................................................................9 JFP1, JFP2: .....................................................10 SATA1~4: SATA 6 / ......................................................................10 ATX_PWR1, CPU_PWR1: ...................................11 JUSB1: USB 2.0 ................................................................................12 JUSB2: USB 3.1 Gen1 .........................................................................12 CPU_FAN1, SYS_FAN1: .........................................13 JCI1: ..................................................14 JAUD1: ....................................................14 JRGB1~2: LED ........................................................................15 JBAT1: CMOS ( BIOS) .............................15 EZ Debug LED: ...............................15

BIOS ..........................................................................................16 BIOS ..................................................................................16 BIOS .......................................................................................................17 BIOS ...........................................................................................17

...............................................18 Windows 7 64-/ Windows 10 64- ..................................18 ...................................................................................18 ...........................................................................................18

MSI A320I PRO AC/ B350I PRO AC/ B350I-S01. , BIOS .

2

y , . , , .

y , . , .

y .

y . , , , .

y , , .

y , .

y , . , .

y , , .

y .

y .

y .

y , , .

y , . .

y , .

y :

.

.

.

.

.

y 60 C (140 F), .

3

AMD Ryzen 1- 2- / Ryzen Radeon Vega / Athlon c Radeon Vega A / Athlon X4 AM4

AMD A320/ B350

y 2x DDR4 32 DDR4 1866/ 2133/ 2400/ 2667(OC)/

2933(OC)/ 3200(OC)+ *

y y ECC UDIMM ( non-ECC)

y non-ECC UDIMM

* A / Athlon X4 2400 . , www. msi.com .

y 1x PCIe 3.0 x16

Ryzen x16

Ryzen Radeon Vega A / Athlon X4 x8

Athlon Radeon Vega x4

y 1x DisplayPort 1.2, 4096x2160@60* (B350I PRO-AC/ A320I PRO-AC)

y 1x HDMI1.4, 4096x2160@24* (B350I PRO-AC/ A320I PRO-AC)

* Ryzen Radeon Vega / Athlon Radeon Vega A.

AMD A320/ B350

y 4x SATA 6/ RAID 0, RAID1 RAID 10

y 1x M.2 (M2_1), PCIe 3.0 x 4 ( Ryzen) PCIe 3.0 x2 ( Athlon Radeon Vega A / Athlon X4) SATA 6/, 2280

4

y Realtek ALC887 Codec

y 7.1- High Definition Audio

LAN 1x Realtek 8111H

Wi-Fi Bluetooth

Intel Dual Band Wireless-AC 3168 (B350I PRO-AC/ A320I PRO-AC)

y M2_2 ( E).

y Wi-Fi 1x1 802.11ac, (2.4 , 5 ) 433 /.

y Bluetooth 4.2, 4.1, BLE, 4.0, 3.0, 2.1, 2.1+EDR

USB

y 2x USB 3.1 Gen2 (SuperSpeed USB 10Gbps) (B350I PRO-AC/ B350I-S01)

y 4x USB 3.1 Gen1 (SuperSpeed USB) (2 , 2 USB)

y 4x USB 2.0 (High-speed USB) (2 , 2 USB)

y 1x PS/2 / y 2x USB 2.0 Type-A

y 1x DisplayPort (A320I PRO AC/ B350I PRO AC)

y 1x HDMI (A320I PRO AC/ B350I PRO AC)

y 2x USB 3.1 Gen2 Type-A (B350I PRO AC/ B350I-S01)

y 1x LAN (RJ45)

y 2x USB 3.1 Gen1 Type-A

y 2x WiFi (A320I PRO AC/ B350I PRO AC)

y 3x

5

y 1x 24- ATX

y 1x 8- ATX 12 y 4x SATA 6/ y 1x USB 2.0 ( 2- USB 2.0)

y 1x USB 3.1 Gen1 ( 2- USB 3.1 Gen1)

y 1x 4- y 1x 4- y 1x y 2x y 1x y 2x LED

y 1x CMOS

- NUVOTON 6795D

y CPU/ y CPU/ y CPU/

- y Mini-ITX - y 6.7 x 6.7 (17.0 x 17.0 )

BIOS

y 1x 128 y UEFI AMI BIOS

y ACPI 5.0, SM BIOS 3.0

y

y y SUPER CHARGER

y COMMAND CENTER

y LIVE UPDATE 6

y MYSTIC LIGHT

y NETWORK GENIE

y MSI SMART TOOL

y X-BOOST

y RAMDISK

y Norton Security

y Google Chrome, Google Toolbar, Google Drive

y CPU-Z MSI GAMING

6 /

/

Audio 7.1- 7.1 JAUD1. . 1. Realtek HD Audio Manager > Advanced Settings, , .

2. Mute the rear output device, when a front headphone plugged in.

3. . .

PS/2

LAN USB 2.0

(B350I PRO AC & B350I-S01) USB 3.1 Gen2

USB 3.1 Gen1

DisplayPort

Wi-Fi

/

.

. 10 /

100 /

1 /

LAN (A320I PRO AC & B350I PRO AC)

(A320I PRO AC & B350I PRO AC)

(A320I PRO AC & B350I PRO AC)

7 /

M2_1

SYS_FAN1 EZ Debug LED CPU_FAN1

JUSB2

ATX_PWR1

JUSB1

JFP2

JFP1 PCI_E1

JAUD1 JRGB2

JRGB1

DIMMA1

DIMMB1

JBAT1

CPU_PWR1

SA TA

3 / S

AT A4

SA TA

1 / S

AT A2

8

, , .

!

y - 4, BIOS .

y , .

y . , , .

y .

y . . ( ) .

y , . .

1

3

5

4

6

7

8

2

9

DIMM , DIMM, .

!

y , , .

y , DIMM 1.35 . .

y - 4/ , . - www.msi.com.

PCI_E1: PCIe

!

y , . .

y , , MSI Gaming Series Graphics Card Bolster .

1 2 3

2

PCI_E1

Ryzen

Ryzen

Radeon Vega A / Athlon X4

Athlon Radeon Vega

PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4

10

SATA1~4: SATA 6 / SATA 6 /. SATA.

SATA1

SATA2 SATA3

SATA4

!

y SATA . , .

y SATA . , .

JFP1, JFP2: , .

1

2 10

9

JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED -

5 Reset Switch 6 Power Switch

7 Reset Switch 8 Power Switch

9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

JFP1

11

ATX_PWR1, CPU_PWR1: ATX.

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V

2 +3.3V 14 -12V

3 Ground 15 Ground

4 +5V 16 PS-ON#

5 Ground 17 Ground

6 +5V 18 Ground

7 Ground 19 Ground

8 PWR OK 20 Res

9 5VSB 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 +3.3V 24 Ground

5

4 1

8

CPU_PWR1

1 Ground 5 +12V

2 Ground 6 +12V

3 Ground 7 +12V

4 Ground 8 +12V

!

.

12

JUSB2: USB 3.1 Gen1 USB 3.1 Gen1 .

1 10

1120

1 Power 11 USB2.0+

2 USB3_RX_DN 12 USB2.0-

3 USB3_RX_DP 13 Ground

4 Ground 14 USB3_TX_C_DP

5 USB3_TX_C_DN 15 USB3_TX_C_DN

6 USB3_TX_C_DP 16 Ground

7 Ground 17 USB3_RX_DP

8 USB2.0- 18 USB3_RX_DN

9 USB2.0+ 19 Power

10 NC 20 No Pin

!

, , .

JUSB1: USB 2.0 USB 2.0 .

1

2 10

9

1 VCC 2 VCC

3 USB0- 4 USB1-

5 USB0+ 6 USB1+

7 Ground 8 Ground

9 No Pin 10 NC

!

y , , VCC .

y , iPad, iPhone iPod USB, , MSI SUPER CHARGER.

13

CPU_FAN1, SYS_FAN1: : PWM (PulseWidth Modulation) . PWM 12, . , . , 3- (Non-PWM) PWM, . . , PWM DC, .

BIOS > HARDWARE MONITOR : PWM DC, .

PWM DC

!

, PWM/ DC.

.

PWM

1

CPU_FAN1

1

SYS_FAN1

PWM

1 Ground 2 +12V

3 Sense 4 Speed Control Signal

DC

1 Ground 2 Voltage Control

3 Sense 4 NC

14

JCI1: .

( )

1. JCI1.

2. .

3. BIOS > SETTINGS > Security > Chassis Intrusion Configuration.

4. Chassis Intrusion Enabled.

5. F10, , Enter, Yes.

6. .

1. BIOS > SETTINGS > Security > Chassis Intrusion Configuration.

2. Chassis Intrusion, Reset.

3. F10, , Enter, Yes.

JAUD1: .

1

2 10

9

1 MIC L 2 Ground

3 MIC R 4 NC

5 Head Phone R 6 MIC Detection

7 SENSE_SEND 8 No Pin

9 Head Phone L 10 Head Phone Detection

15

JBAT1: CMOS ( BIOS) CMOS . ( CMOS ), .

( )

/ BIOS

BIOS 1. .

2. , JBAT1 5-10 .

3. JBAT1.

4.

EZ Debug LED: .

BOOT VGA DRAM CPU

BOOT - .

VGA - .

DRAM - DRAM .

CPU - .

JRGB1~2: LED 5050 RGB.

!

y 5050 RGB (12/G/R/B) 3 (12). , 2 , .

y RGB, .

y MSI .

1

1 +12V 2 G

3 R 4 B 1 JRGB1/ 2

5050 LED

16 BIOS

BIOS . BIOS, . , .

!

y , BIOS . BIOS . BIOS, HELP.

y .

y BIOS .

BIOS Delete, Press DEL key to enter Setup Menu, F11 to enter Boot Menu .

F1: F2: / F3: F4: F5: Memory-Z

F6: F7: EZ

F8: F9:

F10: *

F12: USB - ( FAT / FAT32 ).

* F10 . Yes No, .

17 BIOS BIOS

BIOS BIOS . :

y BIOS F6 .

y Clear CMOS . !

BIOS, CMOS.

BIOS

BIOS M-FLASH :

, BIOS MSI, . BIOS - USB.

BIOS:

1. Del BIOS POST.

2. - USB, .

3. M-FLASH Yes .

4. BIOS BIOS.

5. , .

BIOS Live Update 6 :

, . BIOS:

1. MSI LIVE UPDATE 6.

2. BIOS Update.

3. Scan.

4. Download, BIOS.

5. Next In Windows mode. Next Start BIOS.

6. , .

18

C : www.msi.com.

Windows 7 64-/ Windows 10 64- 1. .

2. Windows 7/ 10 .

: - , Windows 7, USB . MSI Smart Tool Windows 7.

3. Restart .

4. F11 POST (Power-On Self Test) , .

5. .

6. , Press any key to boot from CD or DVD...

7. , Windows 7/ 10.

1. Windows 7/ 10.

2. MSI Driver Disc .

3. , .

4. Install.

5. . .

6. OK .

7. .

.

1. MSI Driver Disc .

2. .

3. Utilities.

4. .

5. Install.

6. . .

7. OK .

8. .

1< 1>

...........................................................................................................2

..................................................................................................................3

I/O ....................................................................................................6 LAN LED .........................................................................................6

...........................................................................................................7 CPU .............................................................................................................8 DIMM ...........................................................................................................9 PCI_E1: PCIe .......................................................................................9 JFP1, JFP2: ................................................................................10 SATA1~4: SATA 6Gb/s ...............................................................................10 ATX_PWR1, CPU_PWR1: ...................................................................11 JUSB1: USB 2.0 ........................................................................................12 JUSB2: USB 3.1 Gen1 ...............................................................................12 CPU_FAN1, SYS_FAN1: .....................................................................13 JCI1: ....................................................................................14 JAUD1: .......................................................................................14 JRGB1~2: LED ...................................................................................15 JBAT1: CMOS ( BIOS) ................................................................15 EZ Debug LED: LED ......................................................................15

BIOS .......................................................................................................16 BIOS ..................................................................................................16 BIOS ..........................................................................................................17 BIOS ..........................................................................................................17

.........................................................................................................18 Windows 7 64-bit/ Windows 10 64-bit ..................................................18 ............................................................................................................18 ............................................................................................................18

MSI A320I PRO AC/ B350I PRO AC/ B350I-S01 ,,BIOS

2

y (ESD),

y y , y , (ESD) , ESD ,

y , y ,

y

y ,, y ,, y y y ,

y , y y ,

,

y 60 ( 140 ),

3

CPU AM4 AMD Ryzen A-series/

Athlon

AMD A320/ B350

y 2 DDR4 , 32GB

DDR4 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/ 3200(OC)+ MHz*

y y ECC UDIMM (-ECC )

y -ECC UDIMM * A-series/ Athlon 2400 MHz www.msi.com ,

y 1 PCIe 3.0 x16

AMD Ryzen x16 A-series/ Athlon x8

y 1 DisplayPort 1.2 , 4096x2160@60Hz* (B350I PRO-AC/ A320I PRO-AC)

y 1 HDMI1.4 , 4096x2160@24Hz* (B350I PRO-AC/ A320I PRO-AC) * Gen A-series/ Athlon

AMD A320/ B350 y 4 SATA 6Gb/s

RAID 0,RAID1 RAID 10

y 1 M.2 (M2_1), PCIe 3.0 x 4 ( AMD Ryzen ) PCIe 3.0 x2 ( A-series/ AthlonTM ) SATA 6Gb/s,2280

y Realtek ALC887 y 7.1-

LAN 1 Realtek 8111H

4

LAN

Intel Wireless-AC 3168 (B350I PRO-AC/ A320I PRO-AC)

y M2_2 (E Key) y Wi-Fi 1x1 802.11ac, (2.4GHz,5GHz) 433 Mbps

y 4.2, 4.1, BLE, 4.0, 3.0, 2.1, 2.1+EDR

USB

y 2 USB 3.1 Gen2 (SuperSpeed USB 10Gbps) (B350I PRO-AC/ B350I-S01)

y 4 USB 3.1 Gen1 (SuperSpeed USB) (2 , USB 2 )

y 4 USB 2.0 (High-speed USB) (2 , USB 2 )

y 1 PS/2 / y 2 USB 2.0 Type-A y 1 DisplayPort (A320I PRO AC/ B350I PRO AC)

y 1 HDMI (A320I PRO AC/ B350I PRO AC)

y 2 USB 3.1 Gen2 Type-A (B350I PRO AC/ B350I-S01)

y 1 LAN (RJ45) y 2 USB 3.1 Gen1 Type-A y 2 WiFi (A320I PRO AC/ B350I PRO AC)

y 3

y 1 24-pin ATX y 1 8-pin ATX 12V y 4 SATA 6Gb/s y 1 USB 2.0 ( 2 USB 2.0 )

y 1 USB 3.1 Gen1 ( 2 USB 3.1 Gen1 )

y 1 4-pin CPU y 1 4-pin y 1 y 2 y 1 y 2 LED y 1 CMOS

5

I/O NUVOTON 6795D

y CPU/ y CPU/ y CPU/

y Mini-ITX y 6.7 x 6.7 (17.0 x 17.0 )

BIOS

y 1 128 Mb flash

y UEFI AMI BIOS

y ACPI 5.0, SM BIOS 3.0

y

y y y COMMAND CENTER

y LIVE UPDATE 6 y RGB LED y y MSI y y y

y Google ,Google ,Google y MSI GAMING CPU-Z

6 I/O

I/O

7.1- 7.1 , I/O JAUD1 , 1. Realtek HD Audio Manager > Advanced Settings

2. Mute the rear output device, when a front headphone plugged in ,

3. I/O ,

PS/2

LAN USB 2.0

(B350I PRO AC B350I-S01) USB 3.1 Gen2

USB 3.1 Gen1

DisplayPort

Wi-Fi

/

10 Mbps

100 Mbps

1 Gbps

LAN LED (A320I PRO AC B350I PRO AC)

(A320I PRO AC B350I PRO AC)

(A320I PRO AC B350I PRO AC)

7 I/O

M2_1

SYS_FAN1 EZ Debug LED CPU_FAN1

JUSB2

ATX_PWR1

JUSB1

CPU

JFP2

JFP1 PCI_E1

JAUD1 JRGB2

JRGB1

DIMMA1

DIMMB1

JBAT1

CPU_PWR1

SA TA

3 / S

AT A4

SA TA

1 / S

AT A2

8

CPU CPU CPU ,

y , AM4 , BIOS

y CPU ,, y CPU , CPU CPU

y CPU CPU y CPU ,, CPU , CPU ( )

y CPU / ,/

1

3

5

4

6

7

8

2

9

DIMM DIMM ,

y , y , 1.35V y AM4 CPU /, www.msi.com ,

PCI_E1: PCIe

y ,,

y , MSI ,

1 2 3

2

PCI_E1

Radeon Vega Graphics A-series/ Athlon X4

Radeon Vega GraphicsAthlon

PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4

10

SATA1~4: SATA 6Gb/s SATA 6Gb/s SATA

SATA1

SATA2 SATA3

SATA4

y SATA 90 , y SATA ,,

JFP1, JFP2: LED

1

2 10

9

JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED -

5 Reset Switch 6 Power Switch

7 Reset Switch 8 Power Switch

9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

JFP1

11

ATX_PWR1, CPU_PWR1: ATX

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V

2 +3.3V 14 -12V

3 Ground 15 Ground

4 +5V 16 PS-ON#

5 Ground 17 Ground

6 +5V 18 Ground

7 Ground 19 Ground

8 PWR OK 20 Res

9 5VSB 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 +3.3V 24 Ground

5

4 1

8

CPU_PWR1

1 Ground 5 +12V

2 Ground 6 +12V

3 Ground 7 +12V

4 Ground 8 +12V

ATX ,

12

JUSB2: USB 3.1 Gen1 USB 3.1 Gen1

1 10

1120

1 Power 11 USB2.0+

2 USB3_RX_DN 12 USB2.0-

3 USB3_RX_DP 13 Ground

4 Ground 14 USB3_TX_C_DP

5 USB3_TX_C_DN 15 USB3_TX_C_DN

6 USB3_TX_C_DP 16 Ground

7 Ground 17 USB3_RX_DP

8 USB2.0- 18 USB3_RX_DN

9 USB2.0+ 19 Power

10 NC 20 No Pin

,

JUSB1: USB 2.0 USB 2.0

1

2 10

9

1 VCC 2 VCC

3 USB0- 4 USB1-

5 USB0+ 6 USB1+

7 Ground 8 Ground

9 No Pin 10 NC

y ,VCC y iPad,iPhone iPod USB , MSI SUPER

CHARGER

13

CPU_FAN1, SYS_FAN1: PWM () DC PWM 12V DC 3 (-PWM) PWM , 100%, PWM DC

PWM DC , BIOS > HARDWARE MONITOR

PWM DC

PWM/ DC ,

, CPU

PWM

DC 1

CPU_FAN1

1

SYS_FAN1

PWM 1 Ground 2 +12V

3 Sense 4 Speed Control Signal

DC 1 Ground 2 Voltage Control

3 Sense 4 NC

14

JCI1:

()

1. JCI1 / 2. 3. BIOS > SETTINGS > Security > Chassis Intrusion Configuration 4. Chassis Intrusion Enabled 5. F10 , Enter Yes 6. ,,

1. BIOS > SETTINGS > Security > Chassis Intrusion Configuration 2. Chassis Intrusion Reset 3. F10 , Enter Yes

JAUD1:

1

2 10

9

1 MIC L 2 Ground

3 MIC R 4 NC

5 Head Phone R 6 MIC Detection

7 SENSE_SEND 8 No Pin

9 Head Phone L 10 Head Phone Detection

15

JBAT1: CMOS ( BIOS) CMOS , , CMOS

()

CMOS/ BIOS

BIOS 1. , 2. JBAT1 5-10 3. JBAT1 4.

EZ Debug LED: LED LED

BOOT VGA DRAM CPU

BOOT - VGA - GPU DRAM - DRAM CPU - CPU

JRGB1~2: LED 5050 RGB LED

y 5050 RGB LED (12V/G/R/B) 3A (12V)

LED 2 , y RGB LED ,, y MSI LED

1

1 +12V 2 G

3 R 4 B 1

JRGB1/ 2

5050 LED

16 BIOS

BIOS ,, , BIOS

y ,BIOS , , BIOS

y , y BIOS

BIOS , Press DEL key to enter Setup Menu, F11 to enter Boot Menu ,Delete

F1: F2: / F3: Favorites

F4: CPU F5: Memory-Z

F6: F7: EZ

F8: F9:

F10: *

F12: USB (FAT/ FAT32 )

* F10 ,, Yes No

17BIOS BIOS

BIOS BIOS BIOS

y BIOS , F6 y CMOS

CMOS ,BIOS

BIOS

M-FLASH BIOS MSI BIOS BIOS U BIOS 1. POST Del BIOS 2. U 3. M-FLASH Yes, flash 4. BIOS BIOS 5. 100% ,

Live Update 6 BIOS LAN BIOS 1. MSI LIVE UPDATE 6 2. BIOS Update 3. Scan 4. Download BIOS 5. Next, In Windows mode Next Start BIOS 6. 100% ,

18

www.msi.com

Windows 7 64-bit/ Windows 10 64-bit 1. 2. Windows 7/ 10 , Windows 7 , USB U MSI Smart Tool Windows 7

3. Restart 4. POST() F11 5. 6. Press any key to boot from CD or DVD... 7. Windows 7/ 10

1. Windows 7/ 10 2. MSI 3. , 4. Install 5. 6. OK 7.

, 1. MSI 2. 3. Utilities 4. 5. Install 6. 7. OK 8.

1< 1>

...........................................................................................................2

.......................................................................................................3

I/O ............................................................................................................6 LED ...................................................................................6

...........................................................................................................7 CPU .............................................................................................................8 ..........................................................................................................9 PCI_E1: PCIe .......................................................................................9 JFP1, JFP2: ................................................................................10 SATA1~4: SATA 6Gb/s ...............................................................................10 ATX_PWR1, CPU_PWR1: ...................................................................11 JUSB1: USB 2.0 ........................................................................................12 JUSB2: USB 3.1 Gen1 ...............................................................................12 CPU_FAN1, SYS_FAN1: .............................................................13 JCI1: ...........................................................................................14 JAUD1: .......................................................................................14 JRGB1~2: LED ...................................................................................15 JBAT1: CMOS ( BIOS) .........................................................15 EZ Debug LED: LED ......................................................................15

BIOS .......................................................................................................16 BIOS ..................................................................................................16 BIOS ..........................................................................................................17 BIOS ..........................................................................................................17

.........................................................................................................18 Windows 7 64-bit/ Windows 10 64-bit ..................................................18 ....................................................................................................18 ....................................................................................................18

MSI A320I PRO AC/ B350I PRO AC/ B350I-S01 BIOS

2

y (ESD)

y

y y

y y y y y y y y

y

y y

y 60C (140F)

3

AM4 AMD Ryzen / Radeon Vega Ryzen / Radeon Vega Athlon A / Athlon X4

AMD A320/ B350

y 2 DDR4 32GB

DDR4 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/ 3200(OC)+ MHz*

y y ECC UDIMM ( -ECC )

y -ECC UDIMM * A / Athlon X4 2400 MHz www.msi.com

y 1 PCIe 3.0 x16 Ryzen x16 Radeon Vega Ryzen A / Athlon X4 x8 Radeon Vega Athlon x4

y 1 DisplayPort 1.2 4096x2160@60Hz* (B350I PRO-AC/ A320I PRO-AC)

y 1 HDMI1.4 4096x2160@24Hz* (B350I PRO-AC/ A320I PRO-AC) * Radeon Vega Ryzen / Radeon Vega Athlon A

AMD A320/ B350 y 4 SATA 6Gb/s

RAID 0 RAID1 RAID 10

y 1 M.2 (M2_1) PCIe 3.0 x 4 ( RYZEN ) PCIe 3.0 x2 (Radeon Vega Athlon A / Athlon X4 ) SATA 6Gb/s 2280

y Realtek ALC887 y 7.1

1 Realtek 8111H Gigabit

4

Intel Wireless-AC 3168 (B350I PRO-AC/ A320I PRO-AC)

y M2_2 (E Key) y Wi-Fi 1x1 802.11ac (2.4GHz,5GHz)

433 Mbps y 4.2 4.1 4.0 3.0 2.1 2.1+EDR

USB

y 2 USB 3.1 Gen2 (SuperSpeed USB 10Gbps) (B350I PRO-AC/ B350I-S01)

y 4 USB 3.1 Gen1 (SuperSpeed USB) (2 2 USB )

y 4 USB 2.0 (High-speed USB) (2 USB )

y 1 PS/2 / y 2 USB 2.0 Type-A y 1 DisplayPort (A320I PRO AC/ B350I PRO AC)

y 1 HDMI (A320I PRO AC/ B350I PRO AC)

y 2 USB 3.1 Gen2 Type-A (B350I PRO AC/ B350I-S01)

y 1 LAN (RJ45) y 2 USB 3.1 Gen1 Type-A y 2 WiFi (A320I PRO AC/ B350I PRO AC)

y 3

y 1 24-pin ATX y 1 8-pin ATX 12V y 4 SATA 6Gb/s y 1 USB 2.0 ( 2 USB 2.0 )

y 1 USB 3.1 Gen1 2 USB 3.1 Gen1 )

y 1 4-pin CPU y 1 4-pin y 1 y 2 y 1 y 2 LED y 1 CMOS

5

I/O NUVOTON 6795D

y CPU/ y CPU/ y CPU/

y Mini-ITX

y 6.7 x 6.7 (17.0 x 17.0 )

BIOS

y 1 128 Mb flash

y UEFI AMI BIOS

y ACPI 5.0, SM BIOS 3.0

y

y y SUPER CHARGER

y COMMAND CENTER

y LIVE UPDATE 6

y MYSTIC LIGHT

y NETWORK GENIE

y MSI SMART TOOL

y X-BOOST

y RAMDISK y Norton Security

y Google ChromeGoogle Google y CPU-Z MSI GAMING

6 I/O

I/O

7.1 7.1 I/O JAUD1 1. Realtek HD Audio Manager > Advanced Settings

2. 3. I/O

PS/2

USB 2.0

(B350I PRO AC & B350I-S01) USB 3.1 Gen2

USB 3.1 Gen1

DisplayPort

Wi-Fi

/

10 Mbps

100 Mbps

1 Gbps

LED (A320I PRO AC & B350I PRO AC)

(A320I PRO AC & B350I PRO AC)

(A320I PRO AC & B350I PRO AC)

7 I/O

M2_1

SYS_FAN1 EZ Debug LED CPU_FAN1

JUSB2

ATX_PWR1

JUSB1

CPU

JFP2

JFP1 PCI_E1

JAUD1 JRGB2

JRGB1

DIMMA1

DIMMB1

JBAT1

CPU_PWR1

SA TA

3 / S

AT A4

SA TA

1 / S

AT A2

8

CPU CPU CPU

y AM4 BIOS y y CPU CPU

y CPU y CPU CPU CPU

y CPU / /

1

3

5

4

6

7

8

2

9

DIMM

y y 1.35V y AM4 CPU/ www.msi.com

PCI_E1: PCIe

PCI_E1

y

y MSI Gaming Series

1 2 3

2

Ryzen Radeon Vega Ryzen A / Athlon

X4

Radeon Vega Athlon

PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4

10

SATA1~4: SATA 6Gb/s SATA 6Gb/s SATA

SATA1

SATA2 SATA3

SATA4

y SATA 90 y SATA

JFP1, JFP2: LED

1

2 10

9

JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED -

5 Reset Switch 6 Power Switch

7 Reset Switch 8 Power Switch

9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

JFP1

11

ATX_PWR1, CPU_PWR1: ATX

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V

2 +3.3V 14 -12V

3 Ground 15 Ground

4 +5V 16 PS-ON#

5 Ground 17 Ground

6 +5V 18 Ground

7 Ground 19 Ground

8 PWR OK 20 Res

9 5VSB 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 +3.3V 24 Ground

5

4 1

8

CPU_PWR1

1 Ground 5 +12V

2 Ground 6 +12V

3 Ground 7 +12V

4 Ground 8 +12V

ATX

12

JUSB2: USB 3.1 Gen1 USB 3.1 Gen1

1 10

1120

1 Power 11 USB2.0+

2 USB3_RX_DN 12 USB2.0-

3 USB3_RX_DP 13 Ground

4 Ground 14 USB3_TX_C_DP

5 USB3_TX_C_DN 15 USB3_TX_C_DN

6 USB3_TX_C_DP 16 Ground

7 Ground 17 USB3_RX_DP

8 USB2.0- 18 USB3_RX_DN

9 USB2.0+ 19 Power

10 NC 20 No Pin

JUSB1: USB 2.0 USB 2.0

1

2 10

9

1 VCC 2 VCC

3 USB0- 4 USB1-

5 USB0+ 6 USB1+

7 Ground 8 Ground

9 No Pin 10 NC

y y USB iPadiPhone iPod MSI SUPER CHARGER

13

CPU_FAN1, SYS_FAN1: (PWM) DC PWM 12V DC 3 ( PWM) PWM 100% PWM DC

PWM DC BIOS > HARDWARE MONITOR

PWM DC

PWM/ DC

CPU

PWM

DC

1

CPU_FAN1

1

SYS_FAN1

PWM 1 Ground 2 +12V

3 Sense 4 Speed Control Signal

DC 1 Ground 2 Voltage Control

3 Sense 4 NC

14

JCI1:

()

1. JCI1 2. 3. BIOS > SETTINGS > Security > Chassis Intrusion Configuration 4. Chassis Intrusion Enabled 5. F10 Enter Yes 6.

1. BIOS > SETTINGS > Security > Chassis Intrusion Configuration 2. Chassis Intrusion Reset 3. F10 Enter Yes

JAUD1:

1

2 10

9

1 MIC L 2 Ground

3 MIC R 4 NC

5 Head Phone R 6 MIC Detection

7 SENSE_SEND 8 No Pin

9 Head Phone L 10 Head Phone Detection

15

JBAT1: CMOS ( BIOS) CMOS CMOS

()

CMOS/

BIOS

BIOS 1. 2. JBAT1 5-10 3. JBAT1 4.

EZ Debug LED: LED LED

BOOT VGA DRAM CPU

BOOT - VGA - DRAM - CPU - CPU

JRGB1~2: LED LED

y 5050 RGB LED 3A (12V) LED 2 , LED

y LED y MSI LED

1

1 +12V 2 G

3 R 4 B 1

JRGB1/ 2

5050 LED

16 BIOS

BIOS BIOS

y BIOS BIOS HELP BIOS

y y BIOS

BIOS DEL F11 Boot Menu Delete

F1: F2: / F3:

F4: CPU F5: Memory-Z

F6: F7: EZ

F8:

F9:

F10: *

F12: USB FAT / FAT32

* F10

17BIOS BIOS

BIOS BIOS BIOS

y BIOS F6 y CMOS

CMOS BIOS

BIOS

M-FLASH BIOS MSI BIOS BIOS USB BIOS 1. POST Del BIOS 2. USB 3. M-FLASH

4. BIOS BIOS 5. 100%

Live Update 6 BIOS BIOS 1. MSI LIVE UPDATE 6 2. BIOS Update (BIOS ) 3. Scan () 4. Download () BIOS 5. Next () In Windows mode Next () Start ( ) BIOS

6. 100%

18

www.msi.com

Windows 7 64-bit/ Windows 10 64-bit 1. 2. Windows 7/ 10 Windows 7 USB USB MSI Smart Tool Windows 7

3. 4. (POST) F11 5. 6. Press any key to boot from CD or DVD... 7. Windows 7/ 10

1. Windows 7/ 10 2. MSI 3.

4. 5. 6. 7.

1. MSI 2. 3. 4. 5. 6. 7. 8.

1< 1>

.....................................................................................2

..................................................................................................................3

I/O ...................................................................................................6 LANLED .........................................................................................6

......................................................................................7 CPU .........................................................................................................8 DIMM ......................................................................................................9 PCI_E1: PCIe ...................................................................................9 JFP1JFP2: ..............................................................10 SATA1~4: SATA 6Gb/s ......................................................................10 ATX_PWR1CPU_PWR1: .........................................................11 JUSB1: USB 2.0................................................................................12 JUSB2: USB 3.1 Gen1 ......................................................................12 CPU_FAN1SYS_FAN1: .........................................................13 JCI1: ..................................................................14 JAUD1: ...............................................................14 JRGB1~2: LED ..................................................................15 JBAT1: CMOS (BIOS) .....................................................15 EZ Debug LED: LED .....................................................15

BIOS ....................................................................................................16 BIOS .............................................................................16 BIOS ...................................................................................................17 BIOS ....................................................................................17

........................................................................................18 Windows 7 64-bit/ Windows 10 64-bit ...................................18 ...................................................................................18 .............................................................................18

MSI A320I PRO AC/ B350I PRO AC/ B350I-S01 BIOS

2

y (ESD)PC

y

y y (ESD) ESD

y

y PC

y PC

y PC

y PCPC

y y y

y y y

PC

y 60OC (140OF)

3

CPU AM4 AMD Ryzen1/2/ Radeon Vega Ryzen/ Radeon VegaAthlon A/ Athlon X4

AMD A320/ B350

y DDR4232GB DDR4 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/ 3200(OC)+

MHz* y y ECC UDIMM (non-ECC )

y Non-ECC UDIMM * A / Athlon X4 2400 MHz www.msi.com

y PCIe 3.0 x16 x1

Ryzen x16 Radeon VegaRyzenA-series /

Athlon X4 X8 Radeon VegaAthlon

X4

y DisplayPort 1.2 x14096x2160@60Hz * (B350I PRO-AC/ A320I PRO-AC)

y HDMI1.4 x14096x2160@24Hz * (B350I PRO-AC/ A320I PRO-AC) * Radeon Vega Ryzen / Radeon Vega Athlon A

AMD A320/ B350 y SATA 6Gb/s x4

RAID 0RAID 1RAID 10 y M.21 (M2_1)PCIe 3.0 x 4 (Ryzen )PCIe 3.0 x2 (Radeon Vega Athlon A/ Athlon X4)SATA 6Gb/s2280

y Realtek ALC887 y 7.1HD

LAN Realtek 8111H Gigabit LAN x1

4

LAN & Bluetooth

Intel Dual Band Wireless-AC 3168 (B350I PRO-AC/ A320I PRO-AC)

y M2_2 (KeyE)

y Wi-Fi 1x1 802.11ac (2.4GHz5GHz)433 Mbps

y Bluetooth 4.2, 4.1, BLE, 4.0, 3.0, 2.1, 2.1+EDR

USB

y USB 3.1 Gen2 (SuperSpeed USB 10Gbps) x2 (B350I PRO-AC/ B350I-S01)

y USB 3.1 Gen1 (SuperSpeed USB) x4(2 USB2)

y USB 2.0 (High-speed USB) x4 (2 USB2)

y PS/2/ x1

y USB 2.0 Type-A x2

y DisplayPort x1 (A320I PRO AC/ B350I PRO AC)

y HDMI x1 (A320I PRO AC/ B350I PRO AC)

y USB 3.1 Gen2 Type-A x2 (B350I PRO AC/ B350I-S01)

y LAN (RJ45) x1

y USB 3.1 Gen1 Type-A x2

y WiFi x2 (A320I PRO AC/ B350I PRO AC)

y x3

y 24ATX x1

y 8ATX 12V x1

y SATA 6Gb/s x4

y USB 2.0 x1 (2USB 2.0)

y USB 3.1 Gen1 x1 (2USB 3.1 Gen1 )

y 4CPU x1

y 4 x1

y x1

y x2

y x1

y LED x2

y CMOS x1

5

I/O NUVOTON 6795D

y CPU/ y CPU/ y CPU/

y Mini-ITX y 6.7 in. x 6.7 in. (17.0 cm x 17.0 cm)

BIOS

y 128 Mb x1

y UEFI AMI BIOS

y ACPI 5.0, SM BIOS 3.0

y

y y SUPER CHARGER

y COMMAND CENTER

y LIVE UPDATE 6

y MYSTIC LIGHT

y NETWORK GENIE

y MSI SMART TOOL

y X-BOOST

y RAMDISK

y Norton Security

y Google Chrome,Google Toolbar, Google Drive

y CPU-Z MSI GAMING

6 I/O

I/O

7.1 7.1I/O JAUD1 1. Realtek HD Audio Manager > Advanced Settings

2. Mute the rear output device, when a front headphone plugged in ( )

3. I/O

PS/2

LAN USB 2.0

(B350I PRO AC & B350I-S01) USB 3.1 Gen2

USB 3.1 Gen1

DisplayPort

Wi-Fi

/ LED

Off

LED

Off 10 Mbps

100 Mbps

1 Gbps

LANLED (A320I PRO AC & B350I PRO AC)

(A320I PRO AC & B350I PRO AC)

(A320I PRO AC & B350I PRO AC)

7I/O

M2_1

SYS_FAN1 EZ Debug LED CPU_FAN1

JUSB2

ATX_PWR1

JUSB1

CPU

JFP2

JFP1 PCI_E1

JAUD1 JRGB2

JRGB1

DIMMA1

DIMMB1

JBAT1

CPU_PWR1

SA TA

3 / S

AT A4

SA TA

1 / S

AT A2

8

CPU CPUCPU

y AM4 BIOS

y CPU

y CPUCPUCPU

y CPUCPU

y CPUCPU CPU CPUCPU

y CPUCPUCPU

1

3

5

4

6

7

8

2

9

DIMM DIMM

y

y CPU1.35VDIMM

y AM4 CPU/ www.msi.com

PCI_E1: PCIe

PCI_E1

y

y MSI Gaming Series Graphics Card Bolster

1 2 3

2

Ryzen

Radeon Vega Ryzen A / Athlon X4

Radeon Vega

Athlon PCI_E1 PCIe 3.0 x16 PCIe 3.0 x8 PCIe 3.0 x4

10

SATA1~4: SATA 6Gb/s SATA 6Gb/s SATA

SATA1

SATA2 SATA3

SATA4

y SATA90

y SATA

JFP1JFP2: LED

1

2 10

9

JFP1

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED -

5 Reset Switch 6 Power Switch

7 Reset Switch 8 Power Switch

9 Reserved 10 No Pin

1

JFP2

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HD D L

ED RE

SET SW

HDD LED HDD LED - HDD LED +

POWER LED - POWER LED +

POWER LED

JFP1

11

ATX_PWR1CPU_PWR1: ATX

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V

2 +3.3V 14 -12V

3 Ground 15 Ground

4 +5V 16 PS-ON#

5 Ground 17 Ground

6 +5V 18 Ground

7 Ground 19 Ground

8 PWR OK 20 Res

9 5VSB 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 +3.3V 24 Ground

5

4 1

8

CPU_PWR1

1 Ground 5 +12V

2 Ground 6 +12V

3 Ground 7 +12V

4 Ground 8 +12V

ATX

12

JUSB2: USB 3.1 Gen1 USB 3.1 Gen1

1 10

1120

1 Power 11 USB2.0+

2 USB3_RX_DN 12 USB2.0-

3 USB3_RX_DP 13 Ground

4 Ground 14 USB3_TX_C_DP

5 USB3_TX_C_DN 15 USB3_TX_C_DN

6 USB3_TX_C_DP 16 Ground

7 Ground 17 USB3_RX_DP

8 USB2.0- 18 USB3_RX_DN

9 USB2.0+ 19 Power

10 NC 20 No Pin

JUSB1: USB 2.0 USB 2.0

1

2 10

9

1 VCC 2 VCC

3 USB0- 4 USB1-

5 USB0+ 6 USB1+

7 Ground 8 Ground

9 No Pin 10 NC

y VCC y USBiPadiPhoneiPod MSI SUPER CHARGER

13

CPU_FAN1SYS_FAN1: PWM ()DCPWM 12V DC 3 (Non-PWM)PWM 100% PWM/DC

BIOS > HARDWARE MONITORPWMDC

PWM/DC

PWM/ DC

CPU

PWM

DC

1

CPU_FAN1

1

SYS_FAN1

PWM 1 Ground 2 +12V

3 Sense 4 Speed Control Signal

DC 1 Ground 2 Voltage Control

3 Sense 4 NC

14

JCI1:

()

1. JCI1/ 2. 3. BIOS > SETTINGS > Security > Chassis Intrusion Configuration 4. Chassis IntrusionEnabled 5. F10Enter

Yes 6.

1. BIOS > SETTINGS > Security > Chassis Intrusion Configuration 2. Chassis IntrusionReset 3. F10Enter

Yes

JAUD1:

1

2 10

9

1 MIC L 2 Ground

3 MIC R 4 NC

5 Head Phone R 6 MIC Detection

7 SENSE_SEND 8 No Pin

9 Head Phone L 10 Head Phone Detection

15

JRGB1~2: LED 5050 RGB LED

y 3A (12V)5050 RGBLED (12V/G/

R/B) 2m2m LED

y LED

y MSI LED

JBAT1: CMOS (BIOS) CMOS CMOS

()

CMOS/ BIOS

BIOS 1. PC 2. JBAT15-10 3. JBAT1 4.

EZ Debug LED: LED LED

BOOT VGA DRAM CPU

BOOT - VGA - GPU DRAM - DRAM CPU - CPU

1

1 +12V 2 G

3 R 4 B 1

JRGB1/ 2

5050 LED

16 BIOS

BIOS BIOS BIOS

y BIOSBIOS BIOS HELP

y

y BIOS

BIOS Press DEL key to enter Setup Menu, F11 to enter Boot Menu Delete

F1: F2: Favorites/ F3: Favorites

F4: CPU F5: Memory-Z

F6: optimized defaults F7: EZ

F8: OC F9: OC

F10: *

F12: USB (FAT/ FAT32 )

* F10Yes No

17BIOS BIOS

BIOS BIOSBIOS

y BIOSoptimized defaults y CMOS

BIOSCOMS

BIOS M-FLASHBIOS :

MSIWEBBIOSUSB BIOS:

1. POST BIOS 2. BIOSUSBUSB

3. M-FLASHYes

4. BIOSBIOS 5.

Live Update 6BIOS :

LAN BIOS: 1. MSI LIVE UPDATE 6 2. BIOS 3. 4. BIOS

5. Next In Windows modeNext Start BIOS

6.

18

www.msi.com

Windows 7 64-bit/ Windows 10 64-bit 1. PC 2. Windows 7/ 10

: Windows 7USB USBMSI Smart ToolWindows 7

3. PCRestart 4. POST (Power-On Self Test)F11 5. 6. Press any key to boot from CD or DVD... (Enter)

7. Windows 7/ 10

1. Windows 7/ 10 2. MSI 3. 4. Install 5.

6. OK 7. PC

1. MSI 2. 3. Utilities 4. 5. Install 6.

7. OK 8. PC

i< 1> Regulatory Notices

FCC Compliance Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

y Reorient or relocate the receiving antenna. y Increase the separation between the equipment and receiver.

y Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

y Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

Tested to comply with FCC standards FOR HOME OR OFFICE USE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CE Conformity Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable:

RED 2014/53/EU; Low Voltage Directive 2014/35/ EU; EMC Directive 2014/30/EU; RoHS Directive 2011/65/EU. Compliance with these directives is assessed using applicable European Harmonized Standards. The point of contact for regulatory matters is MSI, MSI-NL Eindhoven 5706 5692 ER Son.

C-Tick Compliance

B ( )

(B) , .

B

VCCI-B

Battery Information European Union:

Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the

local regulations. Taiwan:

For better environmental protection, waste batteries should be collected separately for recycling or special disposal.

California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit:

http://www.dtsc.ca.gov/hazardouswaste/ perchlorate/

CAUTION: There is a risk of explosion, if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.

Chemical Substances Information In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: http://www.msi.com/html/popup/csr/evmtprtt_ pcm.html

Regulatory Notices

ii Regulatory Notices

WEEE (Waste Electrical and Electronic Equipment) Statement ENGLISH To protect the global environment and as an environmentalist, MSI must remind you that... Under the European Union (EU) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of electrical and electronic equipment cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points.

DEUTSCH Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt Gem der Richtlinie 2002/96/EG ber Elektro- und Elektronik-Altgerte drfen Elektro- und Elektronik-Altgerte nicht mehr als kommunale Abflle entsorgt werden. MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Europische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurckzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgertesammelstelle in Ihrer Nhe.

FRANAIS En tant qucologiste et afin de protger lenvironnement, MSI tient rappeler ceci... Au sujet de la directive europenne (EU) relative aux dchets des quipement lectriques et lectroniques, directive 2002/96/EC, prenant effet le 13 aot 2005, que les produits lectriques et lectroniques ne peuvent tre dposs dans les dcharges ou tout simplement mis la poubelle. Les fabricants de ces quipements seront obligs de rcuprer certains produits en fin de vie. MSI prendra en compte cette exigence relative au retour des produits en fin de vie au sein de la communaut europenne. Par consquent vous pouvez retourner localement ces matriels dans les points de collecte.

MSI , , .... () ( WEEE 2002/96/EC), 13 2005 , , , , . MSI , MSI EC, . .

ESPAOL MSI como empresa comprometida con la proteccin del medio ambiente, recomienda: Bajo la directiva 2002/96/EC de la Unin Europea en materia de desechos y/o equipos electrnicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como elctricos y equipos electrnicos no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrnicos, estn obligados a hacerse cargo de dichos productos al termino de su perodo de vida. MSI estar comprometido con los trminos de recogida de sus productos vendidos en la Unin Europea al final de su periodo de vida. Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de estos residuos.

NEDERLANDS Om het milieu te beschermen, wil MSI u eraan herinneren dat. De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten.

iiiRegulatory Notices Regulatory Notices

SRPSKI Da bi zatitili prirodnu sredinu, i kao preduzee koje vodi rauna o okolini i prirodnoj sredini, MSI mora da vas podesti da Po Direktivi Evropske unije (EU) o odbaenoj ekektronskoj i elektrinoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod elektronsku i elektrinu opremu ne mogu vie biti odbaeni kao obian otpad i proizvoai ove opreme bie prinueni da uzmu natrag ove proizvode na kraju njihovog uobiajenog veka trajanja. MSI e potovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode moete vratiti na lokalnim mestima za prikupljanje.

POLSKI Aby chroni nasze rodowisko naturalne oraz jako firma dbajca o ekologi, MSI przypomina, e... Zgodnie z Dyrektyw Unii Europejskiej (UE) dotyczc odpadw produktw elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), ktra wchodzi w ycie 13 sierpnia 2005, tzw. produkty oraz wyposaenie elektryczne i elektroniczne nie mog by traktowane jako mieci komunalne, tak wic producenci tych produktw bd zobowizani do odbierania ich w momencie gdy produkt jest wycofywany z uycia. MSI wypeni wymagania UE, przyjmujc produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z uycia. Produkty MSI bdzie mona zwraca w wyznaczonych punktach zbiorczych.

TRKE evreci zelliiyle bilinen MSI dnyada evreyi korumak iin hatrlatr: Avrupa Birlii (AB) Kararnamesi Elektrik ve Elektronik Malzeme At, 2002/96/EC Kararnamesi altnda 13 Austos 2005 tarihinden itibaren geerli olmak zere, elektrikli ve elektronik malzemeler dier atklar gibi pe atlamayacak ve bu elektonik cihazlarn reticileri, cihazlarn kullanm sreleri bittikten sonra rnleri geri toplamakla ykml olacaktr. Avrupa Birliine satlan MSI markal rnlerin kullanm sreleri bittiinde MSI rnlerin geri alnmas istei ile ibirlii ierisinde olacaktr. rnlerinizi yerel toplama noktalarna brakabilirsiniz.

ESKY Zle nm na ochran ivotnho prosted - spolenost MSI upozoruje... Podle smrnice Evropsk unie (EU) o likvidaci elektrickch a elektronickch vrobk 2002/96/ EC platn od 13. srpna 2005 je zakzno likvidovat elektrick a elektronick vrobky v bnm komunlnm odpadu a vrobci elektronickch vrobk, na kter se tato smrnice vztahuje, budou povinni odebrat takov vrobky zpt po skonen jejich ivotnosti. Spolenost MSI spln poadavky na odebrn vrobk znaky MSI, prodvanch v zemch EU, po skonen jejich ivotnosti. Tyto vrobky mete odevzdat v mstnch sbrnch.

MAGYAR Annak rdekben, hogy krnyezetnket megvdjk, illetve krnyezetvdknt fellpve az MSI emlkezteti nt, hogy ... Az Eurpai Uni (EU) 2005. augusztus 13-n hatlyba lp, az elektromos s elektronikus berendezsek hulladkairl szl 2002/96/EK irnyelve szerint az elektromos s elektronikus berendezsek tbb nem kezelhetek lakossgi hulladkknt, s az ilyen elektronikus berendezsek gyrti kteless vlnak az ilyen termkek visszavtelre azok hasznos lettartama vgn. Az MSI betartja a termkvisszavtellel kapcsolatos kvetelmnyeket az MSI mrkanv alatt az EU-n bell rtkestett termkek esetben, azok lettartamnak vgn. Az ilyen termkeket a legkzelebbi gyjthelyre viheti.

ITALIANO Per proteggere lambiente, MSI, da sempre amica della natura, ti ricorda che. In base alla Direttiva dellUnione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono pi essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguer a tale Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti allinterno dellUnione Europea alla fine del loro ciclo di vita. possibile portare i prodotti nel pi vicino punto di raccolta

iv Regulatory Notices

JIS C 0950 JIS C 0950200671 http://www.msi.com/html/popup/csr/ cemm_jp.html http://tw.msi.com/html/popup/csr_tw/ cemm_jp.html

India RoHS This product complies with the India E-waste (Management and Handling) Rule 2011 and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Trkiye EEE ynetmelii Trkiye Cumhuriyeti: EEE Ynetmeliine Uygundur

, 3 2008 1057.

Vit Nam RoHS K t ngy 01/12/2012, tt c cc sn phm do cng ty MSI sn xut tun th Thng t s 30/2011/TT-BCT quy nh tm thi v gii hn hm lng cho php ca mt s ha cht c hi c trong cc sn phm in, in t

Wireless Radio Use This device is restricted to indoor use when operating in the 2.4GHz, 5GHz frequency band.

Cet appareil doit tre utilis lintrieur.

.

2.4GHz, 5GHz NCC 2.4GHz, 5GHz Products with radio functionality (EMF) This product incorporates a radio transmitting and receiving device. For computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements. Products designed to be operated at closer proximities, such as tablet computers, comply with applicable EU requirements in typical operating positions. Products can be operated without maintaining a separation distance unless otherwise indicated in instructions specific to the product.

Restrictions for products with radio functionality CAUTION: IEEE 802.11x wireless LAN with

5.155.35 GHz frequency band is restricted for indoor use only in all European Union member states, EFTA (Iceland, Norway,

Liechtenstein), and most other European countries (e.g., Switzerland, Turkey, Republic of Serbia). Using this WLAN application outdoors might lead to interference issues with existing radio services.

Radio frequency bands and maximum power levels Features :802.11 a/b/g/n/ac, BT Frequency Range :2.4GHz, 5GHz Modulation :FHSS, DSSS, OFDM Power Output :10, 20, 23 Channel Band Width :1, 5, 20 ,40 , 80MHz

vRegulatory Notices Regulatory Notices

Environmental Policy y The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.

y Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.

y Visit the MSI website and locate a nearby distributor for further recycling information.

Users may also reach us at gpcontdev@msi. com for information regarding proper Disposal, Take-back, Recycling, and Disassembly of MSI products.

Trademark Recognition All product names used in this manual are the properties of their respective owners and are acknowledged.

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE)

*

**

SJ/T 11364 : GB/T 26572 : GB/T 26572 RHS * : **

(Pb)

(Hg)

(Cd)

(Cr+6)

(PBB)

(PBDE)

1. 0.1 wt % 0.01 wt % 2. 3.

vi Regulatory Notices

Technical Support If a problem arises with your system and no solution can be obtained from the user guide, please contact your place of purchase or local distributor. Alternatively, please try t

Manualsnet FAQs

If you want to find out how the A320I Pro AC MSI works, you can view and download the MSI A320I Pro AC, B350I Pro AC, B350I S01 Quick Start Guide on the Manualsnet website.

Yes, we have the Quick Start Guide for MSI A320I Pro AC as well as other MSI manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a MSI A320I Pro AC. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the MSI A320I Pro AC, B350I Pro AC, B350I S01 Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This MSI A320I Pro AC, B350I Pro AC, B350I S01 Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download MSI A320I Pro AC, B350I Pro AC, B350I S01 Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print MSI A320I Pro AC, B350I Pro AC, B350I S01 Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the MSI A320I Pro AC, B350I Pro AC, B350I S01 Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.