Contents

MSI Codex B930 User's Manual PDF

1 of 27
1 of 27

Summary of Content for MSI Codex B930 User's Manual PDF

MAG Codex Series Personal Computer

Codex B930

2 Contents

Contents Getting Started .............................................................................................................. 3

Package Contents ................................................................................................... 3 Safety & Comfort Tips ............................................................................................ 3 System Overview..................................................................................................... 4 Hardware Setup ...................................................................................................... 9

System Operations ..................................................................................................... 11 Power Management ............................................................................................. 11 Network Connection (Windows 10) ...................................................................... 13 System Recovery (Windows 10) ............................................................................ 16 System Recovery (F3 Hotkey Recovery) (Optional) .............................................. 20

Safety Instructions ...................................................................................................... 21

Regulatory Notices ..................................................................................................... 23

Revision V2.1, 2021/02

3Getting Started

Getting Started This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity.

Package Contents Personal Computer Codex B930

Documentation

Quick Start Guide (Optional)

User Guide (Optional)

Warranty Card

Warranty Book

Accessories

Power Cord

Mouse (Optional)

Keyboard (Optional)

Important Contact your place of purchase or local distributor if any of the items is damaged or missing.

Package contents may vary by country. The included power cord is exclusively for this personal computer and should not be used with other products.

Safety & Comfort Tips Choosing a good workspace is important if you have to work with your PC for a long period of time.

Your work area should have enough illumination. Choose the proper desk and chair and adjust their height to fit your posture when operating.

When sitting on the chair, sit straight and keep a good posture. Adjust the chairs back (if available) to support your back comfortably.

Place you feet flat and naturally on the floor, so that your knees and elbows have the proper position (about 90-degree) when operating.

Put your hands on the desk naturally to support your wrists. Avoid using your PC in a place where discomfort may occur (such as on the bed). The PC is an electrical device. Please treat it with great care to avoid personal injury.

4 Getting Started

System Overview Codex B930 (H510M PRO)

109765

1

2

3 4

11

21

12

7

8

14

17 16

15

13

7

5Getting Started

Codex B930 (Z590 PRO WIFI)

109865

1

2

3 4

22

7

11

8

24

17

20

19

15

14

23

18

25

7

13

12

16

6 Getting Started

1 Power Button Press the power button to turn the system on and off.

2 Ventilator The ventilator on the enclosure is used for air convection and to prevent the equipment from overheating. Do not cover the ventilator.

3 Power Supply Switch Switch this switch to I can turn on the power supply. Switch it to 0 to cut off the power circulation.

4 Power Jack Power supplied through this jack supplies power to your system.

5 Microphone Jack This connector is provided for microphones.

6 Headphone Jack This connector is provided for headphones or speakers.

7 USB 2.0 Port This connector is provided for USB peripheral devices. (Speed up to 480 Mbps)

Important High-speed devices are recommended for USB 3.2 ports whereas low- speed devices, such as mouse or keyboard, are suggested to be plugged into the USB 2.0 ports.

8 USB 3.2 Gen 1 Port This connector is provided for USB peripheral devices. (Speed up to 5 Gbps)

9 USB 3.2 Gen 1 Port (Type-C) This connector is provided for USB peripheral devices. This connector can provide up to 5V/3A of power. (Speed up to 10 Gbps)

10 Hard Disk Drive LED This indicator shows the activity status of the HDD. It flashes when the system is accessing data on the HDD and remains off when no disk activity is detected.

11 HDMI-Out Port The High-Definition Multimedia Interface (HDMI) is an all-digital audio/video interface capable of transmitting uncompressed streams. HDMI supports all TV format, including standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable.

7Getting Started

12 DisplayPort 1.4 Port Supports a maximum resolution of 4K 60Hz.

Important Graphics specifications may vary depending on the installed CPU. For processors without integrated graphics, connect your monitor to the discrete graphics card.

13 PS/2 Keyboard / Mouse Port The PS/2 keyboard / Mouse DIN connector for PS/2 keyboard / Mouse.

14 LAN Jack The standard RJ-45 LAN jack is provided for connection to the Local Area Network (LAN). You can connect a network cable to it. Codex B930 (H510M PRO)

LINK/ACT LED

SPEED LED

LED Status Description

Link/ Activity LED

Off No link Yellow Linked Blinking Data activity

Speed LED Off 10 Mbps Green 100 Mbps Orange 1 Gbps

Codex B930 (Z590 PRO WIFI)

LINK/ACT LED

SPEED LED

LED Status Description

Link/ Activity LED

Off No link Yellow Linked Blinking Data activity

Speed LED Off 10 Mbps Green 100/1000 Mbps Orange 2.5 Gbps

15 Mic This connector is provided for microphones.

16 Line-Out This connector is provided for headphones or speakers.

17 Line-In This connector is provided for external audio output devices.

18 SS-Out Side surround sound line out in 7.1 channel mode.

8 Getting Started

19 CS-Out Center/ subwoofer line out in 5.1/ 7.1 channel mode.

20 RS-Out Rear surround sound line out in 4/ 5.1/ 7.1 channel mode.

21 VGA Port The VGA port supports monitors and other VGA interface devices.

22 Flash BIOS Button Press the Flash BIOS button to flash BIOS, and the LED starts flashing. The LED will be turned off when the process is completed.

23 Wi-Fi Antenna Connector This connector is provided for Wi-Fi Antenna, supports the latest Intel Wi-Fi 6E solution with 6GHz spectrum, MU-MIMO and BSS color technology and delivering speeds up to 2400Mbps.

24 USB 3.2 Gen 2x2 Port (Type-C) This connector is provided for USB peripheral devices. This connector can provide up to 5V/3A of power. (Speed up to 20 Gbps)

25 USB 3.2 Gen 2 Port This connector is provided for USB peripheral devices. (Speed up to 10 Gbps)

9Getting Started

Hardware Setup Connect your peripheral devices to suitable ports.

Important For detailed instructions on how to connect, please refer to the manuals of your peripheral devices.

Reference image only. Appearance will vary.

Connect the power cord to the system and electrical outlet. Power Rating Codex B930 (H510M PRO) 500W: 100-240V~, 50-60Hz, 7-3A

Codex B930 (Z590 PRO WIFI) 750W: 100-240V~, 50-60Hz, 10-5A 850W: 100-240V~, 50-60Hz, 11-5.5A

Switch the power supply switch to I.

Important When unplugging the AC power cord, always hold the connector part of the cord. Never pull the cord directly.

10 Getting Started

Press the power button to power on the system.

11System Operations

System Operations This chapter provides you with essential information on system operations.

Important All information is subject to change without prior notice.

Power Management Power management of personal computers (PCs) and monitors has the potential to save significant amounts of electricity as well as deliver environmental benefits. To be energy efficient, turn off your display or set your PC to sleep mode after a period of user inactivity.

Power Management in Windows 10 [Power Options] in Windows OS allow you to control the power management features of your display, hard drive, and battery. Right-click [Start] , select [Control Panel] from the list and then click [System and Security].

Select [Power Options] and choose a power plan that suits your personal needs. You may also fine-tune the settings by clicking [Change plan settings].

The Shut Down Computer menu presents the options of Sleep (S3/S4) & Shut Down (S5) for rapid and easy management of your system power.

Power Management The power management feature allows the computer to initiate a low-power or Sleep mode after a period of user inactivity. To take advantage of these potential energy savings, the power management feature has been preset to behave in the following ways when the system is operating on AC power:

Turn off the display after 10 minutes Initiate Sleep after 30 minutes

12 System Operations

Waking the System Up The computer shall be able to wake up from power saving mode in response to a command from any of the following:

the power button, the network (Wake On LAN), the mouse, the keyboard.

Energy Saving Tips: Turn off the monitor by pressing the monitor power button after a period of user inactivity.

Tune the settings in Power Options under Windows OS to optimize your PCs power management.

Install power saving software to manage your PCs energy consumption. Always disconnect the AC power cord or switch the wall socket off if your PC would be left unused for a certain time to achieve zero energy consumption.

13System Operations

Network Connection (Windows 10) Wired Network 1. Right-click [Start] and select [Network Connections] from the list. 2. Select [Ethernet] and then [Network and Sharing Center].

3. Select [Set up a new connection or network].

4. Choose [Connect to the Internet] and click [Next].

14 System Operations

5. Select [Broadband (PPPoE)] to connect using DSL or cable that requires a user name and password.

6. Type the information from your Internet Service Provider (ISP) and click [Connect] to establish your LAN connection.

15System Operations

Wireless Network 1. Go to [Start] , click [Settings] and select [Network and Internet]. 2. A list of available WLAN connections pops up. Choose a connection from the list. 3. To establish a new connection, select [Network and Sharing Center].

4. Select [Set up a new connection or network]. 5. Followingly, choose [Manually connect to a wireless network] and click [Next] to

continue. 6. Enter information for the wireless network you intend to add and click [Next] to

proceed.

7. A new WLAN connection has been made.

16 System Operations

System Recovery (Windows 10) The purposes for using the System Recovery Function may include:

Restore the system back to the initial status of original manufacturers default settings.

When some errors have occurred to the operating system in use. When the operating system is affected by virus and is not able to work normally. When you want to install the OS with other built-in languages.

Before using the System Recovery Function, please back up the important data saved on your system drive to other storage devices. If the following solution fails to recover your system, please contact the authorized local distributor or service center for further assistance.

17System Operations

Reset this PC 1. Go to [Start] , click [Settings] and select [Update and security]. 2. Select [Recovery] and click [Get started] under [Reset this PC] to start the system

recovery.

3. The [Choose an option] screen pops up. Choose between [Keep my files] and [Remove everything].

Reset this PC Keep my files

Remove everything

Only the drive where Windows is installed

Just remove my files

Remove files and clean the drive

All drives Just remove my files

Remove files and clean the drive

18 System Operations

Keep my files 1. Select [Keep my files].

2. The [Your apps will be removed] screen shows a list of apps that will need to be reinstalled from the web or installation discs. Click [Next] to continue.

3. The next screen will show the changes to be made during the process. Click [Reset] to start the system reset.

19System Operations

Remove everything 1. Select [Remove everything].

2. If you have multiple hard drives, a screen will pop up, asking you to choose between [Only the drive where Windows is installed] and [All drives].

3. Then select between [Just remove my files] and [Remove files and clean the drive].

4. The next screen will show the changes to be made during the process. Click [Reset] to start the system reset.

20 System Operations

System Recovery (F3 Hotkey Recovery) (Optional) Precautions for Using the System Recovery Function 1. If your hard drive and system encountered non-recoverable problems, please use

the F3 Hotkey recovery from the Hard Drive first to perform the System Recover Function.

2. Before using the System Recovery Function, please backup the important data saved on your system drive to other storage devices.

Recovering the system with the F3 Hotkey Follow the instructions below to continue: 1. Restart the PC. 2. Press the F3 hotkey on the keyboard promptly when the MSI greeting appears on

the display. 3. On the [Choose an Option] screen, select [Troubleshoot]. 4. On the [Troubleshoot] screen, select [Restore MSI factory] to reset the system to

the default settings. 5. On the [RECOVERY SYSTEM] screen, select [System Partition Recovery]. 6. Follow the on-screen instructions to continue and complete the Recovery Function.

21Safety Instructions

Safety Instructions Read the safety instructions carefully and thoroughly. All cautions and warnings on the device or User Guide should be noted. Refer servicing to qualified personnel only.

Power Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the device to the power outlet.

If the power cord comes with a 3-pin plug, do not disable the protective earth pin from the plug. The device must be connected to an earthed mains socket-outlet.

Please confirm the power distribution system in the installation site shall provide the circuit breaker rated 120/240V, 20A (maximum).

Always unplug the power cord before installing any add-on card or module to the device.

Always disconnect the power cord or switch the wall socket off if the device would be left unused for a certain time to achieve zero energy consumption.

Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord.

If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.

Battery Please take special precautions if this device comes with a battery.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.

Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, which can result in an explosion.

Avoid leaving a battery in an extremely high temperature or extremely low air pressure environment that can result in an explosion or the leakage of flammable liquid or gas.

Do not ingest battery. If the coin/button cell battery is swallowed, it can cause severe internal burns and can lead to death. Keep new and used batteries away from children.

European Union: Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.

Taiwan: For better environmental protection, waste batteries should be collected separately for recycling or special disposal.

22 Safety Instructions

California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: https://dtsc.ca.gov/perchlorate/

Environment To reduce the possibility of heat-related injuries or of overheating the device, do not place the device on a soft, unsteady surface or obstruct its air ventilators.

Use this device only on a hard, flat and steady surface. To prevent fire or shock hazard, keep this device away from humidity and high temperature.

Do not leave the device in an unconditioned environment with a storage temperature above60orbelow0,whichmaydamagethedevice.

Themaximumoperatingtemperatureisaround35. When cleaning the device, be sure to remove the power plug. Use a piece of soft cloth rather than industrial chemical to clean the device. Never pour any liquid into the opening; that could damage the device or cause electric shock.

Always keep strong magnetic or electrical objects away from the device. If any of the following situations arises, get the device checked by service personnel: The power cord or plug is damaged. Liquid has penetrated into the device. The device has been exposed to moisture. The device does not work well or you can not get it working according to the User

Guide. The device has dropped and damaged. The device has obvious sign of breakage.

23Regulatory Notices

Regulatory Notices CE Conformity Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable:

RED 2014/53/EU Low Voltage Directive 2014/35/EU EMC Directive 2014/30/EU RoHS Directive 2011/65/EU ErP Directive 2009/125/EC

Compliance with these directives is assessed using applicable European Harmonized Standards. The point of contact for regulatory matters is MSI, MSI-NL Eindhoven 5706 5692 ER Son.

Products with Radio Functionality (EMF) This product incorporates a radio transmitting and receiving device. For computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements. Products designed to be operated at closer proximities, such as tablet computers, comply with applicable EU requirements in typical operating positions. Products can be operated without maintaining a separation distance unless otherwise indicated in instructions specific to the product.

Restrictions for Products with Radio Functionality (select products only)

CAUTION: IEEE 802.11x wireless LAN with 5.15~5.35 GHz frequency band is restricted for indoor use only in all European Union member states, EFTA (Iceland, Norway, Liechtenstein), and most other European countries (e.g., Switzerland, Turkey, Republic of Serbia). Using this WLAN application outdoors might lead to interference issues with existing radio services.

CAUTION: Fixed outdoor installations for WiGig application (57~66 GHz frequency band) are excluded in all European Union member states, EFTA (Iceland, Norway, Liechtenstein), and other European countries (e.g., Switzerland, Turkey, Republic of Serbia).

Radio frequency bands and maximum power levels Features 802.11 a/b/g/n/ac, BT Frequency Range 2.4 GHz, 5 GHz Modulation FHSS, DSSS, OFDM Power Output 10, 20, 23 Channel Bandwidth 1, 5, 20, 40, 80 MHz

24 Regulatory Notices

FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help. Notice 1 The changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Notice 2 Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626) 913-0828 www.msi.com

WEEE Statement Under the European Union (EU) Directive on Waste Electrical and Electronic Equipment, Directive 2012/19/EU, products of electrical and electronic equipment cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.

25Regulatory Notices

Chemical Substances Information In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: https://storage-asset.msi.com/html/popup/csr/evmtprtt_pcm.html

RoHS Statement Japan JIS C 0950 Material Declaration A Japanese regulatory requirement, defined by specification JIS C 0950, mandates that manufacturers provide material declarations for certain categories of electronic products offered for sale after July 1, 2006. https://storage-asset.msi.com/html/popup/csr/cemm_jp.html

India RoHS This product complies with the India E-waste (Management and Handling) Rule 2011 and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Turkey EEE Regulation Conforms to the EEE Regulations of the Republic Of Turkey

Ukraine Restriction of Hazardous Substances The equipment complies with requirements of the Technical Regulation, approved bytheResolutionofCabinetofMinistryofUkraineasofDecember3,20081057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.

Vietnam RoHS As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.

26 Regulatory Notices

Green Product Features Reduced energy consumption during use and stand-by Limited use of substances harmful to the environment and health Easily dismantled and recycled Reduced use of natural resources by encouraging recycling Extended product lifetime through easy upgrades Reduced solid waste production through take-back policy

Environmental Policy The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.

Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.

Visit the MSI website and locate a nearby distributor for further recycling information.

Users may also reach us at gpcontdev@msi.com for information regarding proper disposal, take-back, recycling, and disassembly of MSI products.

Upgrade and Warranty Please note that certain components preinstalled in the product may be upgradable or replaceable by users request. For any further information about the product users purchased, please contact the local dealer. Do not attempt to upgrade or replace any component of the product if you are not an authorized dealer or service center, since it may cause the warranty void. It is strongly recommended that you contact the authorized dealer or service center for any upgrade or replace service.

Acquisition of Replaceable Parts Please be noticed that the acquisition of replaceable parts (or compatible ones) of the product users purchased in certain countries or territories may be fulfilled by the manufacturer within 5 years at most since the product has been discontinued, depending on the official regulations declared at the time. Please contact the manufacturer via https://www.msi.com/support/ for the detailed information about the acquisition of spare parts.

27Regulatory Notices

Copyright and Trademarks Notice Copyright Micro-Star Intl Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Intl Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice.

T

Manualsnet FAQs

If you want to find out how the Codex B930 MSI works, you can view and download the MSI Codex B930 User's Manual on the Manualsnet website.

Yes, we have the User's Manual for MSI Codex B930 as well as other MSI manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a MSI Codex B930. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the MSI Codex B930 User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This MSI Codex B930 User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download MSI Codex B930 User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print MSI Codex B930 User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the MSI Codex B930 User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.