Mitsubishi GOT1000 GT15-70STAND Stand User's Manual PDF

1 of 1
1 of 1

Summary of Content for Mitsubishi GOT1000 GT15-70STAND Stand User's Manual PDF

User's Manual

GT15-90STAND GT15-80STAND GT15-70STAND GT05-50STAND

Thank you for choosing Mitsubishi Electric Graphic Operation Terminal (GOT).

2004 MITSUBISHI ELECTRIC CORPORATION

GOT2000/GOT1000 Series STAND

Prior to use, please read both this manual and detailed manual thoroughly to fully understand the product.

MODEL GT15-STAND-U

MODEL CODE

1D7M00

IB(NA)-0800294-H(1806)MEE

SAFETY PRECAUTIONS (Always read these precautions before using this equipment.)

Before using this product, please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly. The precautions given in this manual are concerned with this prod- uct. In this manual, the safety precautions are ranked as "WARNING" and "CAUTION".

Note that the CAUTION level may lead to a serious accident according to the circumstances. Always follow the precautions of both levels because they are import- ant to personal safety. Please save this manual to make it accessible when required and always forward it to the end user.

Indicates that incorrect handling may cause hazardous conditions, resulting in death or severe injury.

Indicates that incorrect handling may cause hazardous conditions, resulting in medium or slight personal injury or physical damage.

WARNING

CAUTION

[INSTALLATION PRECAUTIONS]

[PRECAUTIONS FOR USE]

[DISPOSAL PRECAUTIONS]

Manuals

The following shows manuals relevant to this product.

For relevant manuals, refer to the PDF manuals stored in the GT Designer3 DVD-ROM.

Referenced Standard: GB/T15969.2 (Requirement of Chinese standardized law)

Make sure to externally shut off the all phases of the system power supply before mounting/removing the GOT onto/from the stand. Failure to do so may cause the unit to fail or malfunction.

Use this stand in an environment which satisfies the general specifications of the GOT to be used. Using in an environment other than that satisfies the general specifications may cause an electric shock, a fire, or damage or deterioration to the GOT. For the general specifications of the GOT, refer to the detailed manual.

Be careful not to get your finger caught when removing the angle adjusting screws from the stand and adjusting the mounting angle.

When mounting the GOT onto the stand, fix it with the mounting fixtures securely and tighten the screws in the specified torque rage. Loose tightening may cause the GOT to drop off from the stand. For the specified torque range of the mounting screws, refer to the detailed manual.

Make sure that mounting angle is 45, 55, 65 or 75 degrees, when adjusting the mounting angel with the GOT mounted on the stand. If mounting angle is set to other than above, the GOT bottom may interfere with the stand bottom, resulting in the GOT damage.

Install this stand on a horizontal and stable place. If this stand is used on an unstable place, the GOT may fall down, causing a damage to the GOT or an injury to the user.

Dispose of this product as industrial waste.

Detailed Manual

Manual name Manual number

(Type code)

GOT2000 Series User's Manual (Hardware) (Sold separately)

SH-081194ENG (1D7MJ5)

GT16 User's Manual (Hardware) (Sold separately)

SH-080928ENG (1D7MD3)

GT15 User's Manual (Sold separately)

SH-080528ENG (1D7M23)

Relevant Manuals

WARNING

CAUTION

CAUTION

CAUTION

1. Overview

This User's Manual describes the stand for the GOT2000/GOT1000 series (hereafter abbreviated to the stand). The stand is useful for debugging the GOT screen data, as it can set the GOT at a proper angle on a table.

2. SPECIFICATIONS

The general specifications of the stand is the same as that of the GOT. For the general specifications of the GOT, refer to the detailed manual. The following shows the screen size supported by the stand.

Product name Model name Description

Stand

GT15-90STAND For 15" GOT

GT15-80STAND For 12.1" GOT

GT15-70STAND For 10.4", 8.4" GOT

GT05-50STAND For 5.7" GOT

3. How to Use Stand

(1) GT15-90STAND, GT15-80STAND, GT15-70STAND GT2710 is mounted on GT15-70STAND in the following example.

1) Adjust the mounting angle with the angle adjusting screw.

(For GT15-70STAND)

2) Put the GOT into the opening section of the stand from the back. GT15-70STAND has two opening sections. The bigger one is for the 10.4" GOT and the smaller one is for the 8.4" GOT.

3) Put the mounting fixtures into the holes for the GOT mounting fixtures and fasten the mounting screws in the specified torque range (0.36 Nm to 0.48 Nm) to fix the GOT.

4) After the installation, perform wiring, etc.

(2) GT05-50STAND GT2705 is mounted on GT05-50STAND in the following example.

1) Determine the angle for installing the GOT. Slide the angle adjustment fitting as shown below to determine the angle. The angle can be adjusted to 75, 65, 55 or 45. When installing multiple units to the GOT, use the stand with 75 or 65 degrees for securing lead-in allowances for cables at the bottom of the GOT.

2) Once the angle is determined, insert the angle adjustment fitting's fixing hook into the hook insertion section on the bottom of the stand.

3) Securely tighten the fixing screw.

4) Put the GOT into the opening section of the stand from the back.

5) Put the mounting fixtures into the holes for the GOT mounting fixtures and fasten the mounting screws in the specified torque range (0.36 Nm to 0.48 Nm) to fix the GOT.

6) After the installation, perform wiring, etc.

4. External Dimensions

Unit: mm (inch) * Dimensions for mounting angle of 75 degrees

Model name

Type of GOT mounted

A B C* D E F

GT15- 90STAND

When 15" GOT is

mounted

444 (17.5)

200 (7.9)

364 (14.3)

4 (0.16)

65 (2.56)

8.7 (0.34)

GT15- 80STAND

When 12.1" GOT is

mounted

334 (13.1)

200 (7.9)

345 (13.6)

4 (0.16)

63 (2.48)

8.7 (0.34)

GT15- 70STAND

When 10.4" GOT is

mounted

314 (12.4)

300 (11.8)

327 (12.9)

4 (0.16)

63 (2.48)

8.7 (0.34)

When 8.4" GOT is

mounted

314 (12.4)

335 (13.2)

294 (11.6)

4 (0.16)

63 (2.48)

8.7 (0.34)

GT05- 50STAND

When 5.7" GOT is

mounted

210 (0.83)

260 (10.24)

254 (10)

4 (0.16)

40 (1.57)

5 (0.2)

Model name Weight

GT15-90STAND 1.7kg(3.7lb)

GT15-80STAND 1.9kg(4.2lb)

GT15-70STAND 1.5kg(3.3lb)

GT05-50STAND 1.1kg(2.4lb)

A

(The above is the GT15-70STAND)

F FB

C

4 5 5 5 65 75

D E

Warranty Mitsubishi Electric will not be held liable for damage caused by factors found not to be the cause of Mitsubishi Electric; machine damage or lost profits caused by faults in the Mitsubishi Electric products; damage, secondary damage, accident compensation caused by special factors unpredictable by Mitsubishi Electric; damages to products other than Mitsubishi Electric products; and to other duties.

For safe use This product has been manufactured as a general-purpose part for

general industries, and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life.

Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger movement vehicles, consult with Mitsubishi Electric.

This product has been manufactured under strict quality control. However, when installing the product where major accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.

USA

Brazil

Mexico

Germany

UK

Italy

Spain

France

Czech

Turkey

Poland

Russia

South Africa

China

Taiwan

Korea

Singapore

Thailand

Indonesia

Vietnam

India

Australia

Country/Region Sales office/Tel Mitsubishi Electric Automation, Inc. 500 Corporate Woods Parkway, Vernon Hills, IL 60061, U.S.A. Tel: +1-847-478-2100 Mitsubishi Electric do Brasil Comercio e Servicos Ltda. Avenida Adelino Cardana, 293, 21 andar, Bethaville, Barueri SP, Brasil CEP 06401-147 Tel: +55-11-4689-3000 Mitsubishi Electric Automation, Inc. Mexico Branch Mariano Escobedo #69, Col. Zona Industrial, Tlalnepantla Edo. Mexico, C.P.54030 Tel: +52-55-3067-7511 Mitsubishi Electric Europe B.V. German Branch Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany Tel: +49-2102-486-0 Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Hertfordshire, AL10 8XB, U.K. Tel: +44-1707-28-8780 Mitsubishi Electric Europe B.V. Italian Branch Centro Direzionale Colleoni - Palazzo Sirio, Viale Colleoni 7, Agrate Brianza (MB), Italy Tel: +39-039-60531 Mitsubishi Electric Europe B.V. Spanish Branch Carretera de Rubi 76-80-Apdo.420, 08190 Sant Cugat del Valles (Barcelona), Spain Tel: +34-935-65-3131 Mitsubishi Electric Europe B.V. French Branch 25, Boulevard des Bouvets, 92741 Nanterre Cedex, France Tel: +33-1-55-68-55-68 Mitsubishi Electric Europe B.V. Czech Branch Avenir Business Park, Radlicka 751/113e, 158 00 Praha 5, Czech Republic Tel: +420-251-551-470 Mitsubishi Electric Turkey A.S. Umraniye Branch Serifali Mahallesi Nutuk Sokak No:5, TR-34775 Umraniye / Istanbul, Turkey Tel: +90-216-526-3990 Mitsubishi Electric Europe B.V. Polish Branch ul. Krakowska 50, 32-083 Balice, Poland Tel: +48-12-347-65-00 Mitsubishi Electric (Russia) LLC St. Petersburg Branch Piskarevsky pr. 2, bld 2, lit Sch, BC Benua, office 720; RU-195027 St. Petersburg, Russia Tel: +7-812-633-3497 Adroit Technologies 20 Waterford Office Park, 189 Witkoppen Road, Fourways, Johannesburg, South Africa Tel: +27-11-658-8100 Mitsubishi Electric Automation (China) Ltd. No.1386 Hongqiao Road, Mitsubishi Electric Automation Center, Shanghai, China Tel: +86-21-2322-3030 SETSUYO ENTERPRISE CO., LTD. 6F, No.105, Wugong 3rd Road, Wugu District, New Taipei City 24889, Taiwan Tel: +886-2-2299-2499 Mitsubishi Electric Automation Korea Co., Ltd. 7F-9F, Gangseo Hangang Xi-tower A, 401, Yangcheon-ro, Gangseo-Gu, Seoul 07528, Korea Tel: +82-2-3660-9530 Mitsubishi Electric Asia Pte. Ltd. 307 Alexandra Road, Mitsubishi Electric Building, Singapore 159943 Tel: +65-6473-2308 Mitsubishi Electric Factory Automation (Thailand) Co., Ltd. 12th Floor, SV.City Building, Office Tower 1, No. 896/19 and 20 Rama 3 Road, Kwaeng Bangpongpang, Khet Yannawa, Bangkok 10120, Thailand Tel: +66-2682-6522 to 31 PT. Mitsubishi Electric Indonesia Gedung Jaya 11th Floor, JL. MH. Thamrin No.12, Jakarta Pusat 10340, Indonesia Tel: +62-21-3192-6461 Mitsubishi Electric Vietnam Co., LTD. Ho Chi Minh Head Office Unit 01-04, 10th Floor, Vincom Center, 72 Le Thanh Ton Street, District 1, Ho Chi Minh City, Vietnam Tel: +84-8-3910-5945 Mitsubishi Electric India Pvt. Ltd. Pune Branch Emerald House, EL -3, J Block, M.I.D.C., Bhosari, Pune - 411026, Maharashtra, India Tel: +91-20-2710-2000 Mitsubishi Electric Australia Pty. Ltd. 348 Victoria Road, P.O. Box 11, Rydalmere, N.S.W. 2116, Australia Tel: +61-2-9684-7777

HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN

When exported from Japan, this manual does not require application to the Ministry of Economy, Trade and Industry for service transaction permission.

Specifications subject to change without not

Manualsnet FAQs

If you want to find out how the GOT1000 Mitsubishi works, you can view and download the Mitsubishi GOT1000 GT15-70STAND Stand User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Mitsubishi GOT1000 as well as other Mitsubishi manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Mitsubishi GOT1000. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Mitsubishi GOT1000 GT15-70STAND Stand User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Mitsubishi GOT1000 GT15-70STAND Stand User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Mitsubishi GOT1000 GT15-70STAND Stand User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Mitsubishi GOT1000 GT15-70STAND Stand User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Mitsubishi GOT1000 GT15-70STAND Stand User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.