Mitsubishi GOT2000 GT25-05PSGC Sheet User's Manual PDF

1 of 1
1 of 1

Summary of Content for Mitsubishi GOT2000 GT25-05PSGC Sheet User's Manual PDF

User's Manual

Thank you for purchasing Mitsubishi Electric Graphic Operation Terminal.

GOT2000 Series Protective Sheet for GT27/GT25/GT23/GT2107

GT27-15PSCC GT25-08PSCC GT27-15PSGC GT25-08PSGC GT25-12PSCC GT21-07WPSCC GT25-12PSGC GT21-07WPSGC GT25-12WPSCC GT25-05PSCC GT25-12WPSGC GT25-05PSGC GT25-10PSCC GT25-05PSCC-2 GT25-10PSGC GT25-05PSGC-2 GT25-10WPSCC GT25-12PSCC-UC GT25-10WPSGC GT25-10PSCC-UC

GT25-08PSCC-UC

Prior to use, please read both this manual and detailed manual thoroughly to fully understand the product.

MODEL GT27/GT25-PS-U-JE

MODEL CODE

1D7MH9

IB(NA)-0800499-G(2101)MEE

2013 MITSUBISHI ELECTRIC CORPORATION

SAFETY PRECAUTIONS (Always read these precautions before using this equipment.)

Before using this product, please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly. The precautions given in this manual are concerned with this product. In this manual, the safety precautions are ranked as "WARNING" and "CAUTION".

Note that the CAUTION level may lead to a serious accident according to the circumstances. Always follow the precautions of both levels because they are important to personal safety. Please save this manual to make it accessible when required and always forward it to the end user.

[INSTALLATION PRECAUTIONS]

[STARTUP AND MAINTENANCE PRECAUTIONS]

Indicates that incorrect handling may cause hazardous conditions, resulting in death or severe injury.

Indicates that incorrect handling may cause hazardous conditions, resulting in medium or slight personal injury or physical damage.

When attaching the protective sheet onto the GOT display section, make sure to fit the protective sheet onto the section closely without leaving any air between them. Failure to do so may cause a malfunction/

Daily check the protective sheet with eyes. When you find extreme dirt or scratches on the surface, immediately replace it with new one. Using the productive sheet of decreased visibility may cause a malfunction.

WARNING

CAUTION

CAUTION

WARNING

[DISPOSAL PRECAUTIONS]

[TRANSPORTATION PRECAUTIONS]

Manuals

The following shows manuals relevant to this product.

For detailed manuals and relevant manuals, refer to the e-Manual or PDF manuals stored in the DVD-ROM for the screen design software used.

The latest manuals are also available from MITSUBISHI ELECTRIC FA Global Website (www.MitsubishiElectric.com/fa).

Referenced Standard: GB/T15969.2 (Requirement of Chinese standardized law)

Packing List After unpacking the box, check that the following products are included.

Dispose of this product as industrial waste.

When fumigants that contain halogen materials such as fluorine, chlorine, bromine, and iodine are used for disinfecting and protecting wooden packaging from insects, they cause malfunction when entering our products. Please take necessary precautions to ensure that remaining materials from fumigant do not enter our products, or treat packaging with methods other than fumigation (heat method). Additionally, disinfect and protect wood from insects before packing products.

Manual name Manual number (Model code)

GOT2000 Series User's Manual (Hardware) (Sold separately)

SH-081194ENG (1D7MJ5)

Model Product Quantity

GT27-15PSCC GT27-15PSGC GT25-12PSCC GT25-12PSGC GT25-10PSCC GT25-10PSGC GT25-12WPSCC GT25-12WPSGC GT25-10WPSCC GT25-10WPSGC GT25-08PSCC GT25-08PSGC GT21-07WPSCC GT21-07WPSGC GT25-05PSCC GT25-05PSGC GT25-05PSCC-2 GT25-05PSGC-2 GT25-12PSCC-UC GT25-10PSCC-UC GT25-08PSCC-UC

GOT2000 series protective sheet 5

GOT2000 Series Protective Sheet for GT27/GT25/GT23/GT2107 User's Manual (This manual)

1

CAUTION

CAUTION

1. OVERVIEW

This User's Manual describes GOT 2000 series protective sheet (hereinafter referred to as the protective sheet). Use the protective sheet to protect the display section surface from scratches and dirt when operating the touch keys on the GOT display section.

2. SPECIFICATIONS

The following shows the performance specifications and models of the protective sheets, and applicable GOT screen sizes. The general specifications for the protective sheet are the same as those of the GOT. For the general specifications of the GOT, refer to the GOT2000 Series User's Manual (Hardware).

The clear protective sheets and the antiglare protective sheets are available. The clear protective sheets have excellent transparency and do not reduce the brightness of the GOT screen. The antiglare protective sheets are anti-reflection coated and suitable for use in an environment where the GOT screen is difficult to see because of the reflected light.

*1: The protective sheet is shaped not to cover the USB environmental protection cover.

3. EXTERNAL DIMENSIONS

(1) GT27-15PSCC, GT27-15PSGC, GT25-12PSCC, GT25-12PSGC, GT25-10PSCC, GT25-10PSGC, GT25-08PSCC, GT25-08PSGC, GT25-05PSCC, GT25-05PSGC

Product Model Description

Protective sheet

GT27-15PSGC For 15"

Antiglare type Transparent With a hole for the USB

environmental protection cover

GT25-12PSGC For 12.1"

GT25-10PSGC For 10.4"

GT25-08PSGC For 8.4"

GT25-05PSGC For 5.7" (GT2705)

GT25-05PSGC-2 For 5.7" (GT2505)

GT25-12WPSGC For 12.1" Wide Antiglare type Transparent Without a hole for the USB

environmental protection cover*1

GT25-10WPSGC For 10.1" Wide

GT21-07WPSGC For 7" Wide

GT27-15PSCC For 15"

Clear type Transparent With a hole for the USB

environmental protection cover

GT25-12PSCC For 12.1"

GT25-10PSCC For 10.4"

GT25-08PSCC For 8.4"

GT25-05PSCC For 5.7" (GT2705)

GT25-05PSCC-2 For 5.7" (GT2505)

GT25-12WPSCC For 12.1" Wide Clear type Transparent Without a hole for the USB

environmental protection cover*1

GT25-10WPSCC For 10.1" Wide

GT21-07WPSCC For 7" Wide

GT25-12PSCC-UC For 12.1" Clear type Transparent Without a hole for the USB

environmental protection cover

GT25-10PSCC-UC For 10.4"

GT25-08PSCC-UC For 8.4"

B A

Hole for the human sensor (Only for 15 and 12.1)

Finger gripHole for the USB environmental protection cover

Joining surface

(2) GT25-12WPSCC, GT25-12WPSGC, GT25-10WPSCC, GT25-10WPSGC, GT21-07WPSCC, GT21-07WPSGC, GT25-12PSCC-UC, GT25-10PSCC- UC, GT25-08PSCC-UC

(3) GT25-05PSCC-2, GT25-05PSGC-2

Unit: mm (inch)

Item A B

15" protective sheet 392(15.4) 287(11.3)

12.1" protective sheet 312(12.3) 234(9.21)

12.1" Wide protective sheet 297(11.7) 198(7.80)

10.4" protective sheet 299(11.8) 206(8.11)

10.1" Wide protective sheet 250(9.84) 173(6.81)

8.4" protective sheet 237(9.33) 182(7.17)

7" Wide protective sheet 187(7.36) 121(4.76)

5.7" protective sheet (for GT2705) 163(6.42) 127(5.00)

5.7" protective sheet (for GT2505) 160(6.30) 127(5.00)

B

A Hole for the human sensor (Only for 12.1)

Finger grip

Joining surface

B

Finger grip

A Joining surface

4. INSTALLATION AND REMOVAL

For attaching and removing the protective sheet, refer to the example of the GT2712.

1) If the old protective sheet is attached, slowly remove the sheet from the finger grip part of the lower right of the GOT. Clean the GOT surface.

2) Peel the release paper off the back of the new protective sheet. Position the hole for the USB environmental protection cover of the protective sheet to the USB environmental protection cover of the GOT. If the protective sheet without the hole for the USB environmental protection cover is attached, position the sheet from the upper left of the GOT.

3) To attach the protective sheet, attach it from one direction gradually. Make sure to fit the protective sheet onto the joining surface closely without leaving any air between them. Attach the protective sheet with adding additional pressure sufficiently to the adhesive side of the outer circumference. To hold adequate strength of the adhesive joining, use the GOT after a lapse of about 24 hours.

5. PRECAUTIONS FOR USE

1) The protective sheet is consumable supplies. If you find scratches or extreme dirt by the periodic check, replace it with new one.

2) Do not push the protective sheet with something whose the point is sharp, such as a mechanical pencil or screwdriver. Doing so may cause scratches or be damaged.

3) Do not wash the protective sheet with using bleach, thinner, organic solvent, caustic chemical, and others. Doing so may change in shape or color.

4) Do not expose the protective sheet to direct sunlight. If the protective sheet gets dust, wipe the sheet with a damp cloth.

5) When using GT25-05PSCC-2 or GT25-05PSGC-2, remove the protective film from the sheet surface.

Warranty Mitsubishi Electric will not be held liable for damage caused by factors found not to be the cause of Mitsubishi Electric; machine damage or lost profits caused by faults in the Mitsubishi Electric products; damage, secondary damage, accident compensation caused by special factors unpredictable by Mitsubishi Electric; damages to products other than Mitsubishi Electric products; and to other duties.

For safe use This product has been manufactured as a general-purpose part for

general industries, and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life.

Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger movement vehicles, consult with Mitsubishi Electric.

This product has been manufactured under strict quality control. However, when installing the product where major accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.

Country/Region Sales office/Tel

USA Mitsubishi Electric Automation, Inc. 500 Corporate Woods Parkway, Vernon Hills, IL 60061, U.S.A. Tel: +1-847-478-2100

Brazil Mitsubishi Electric do Brasil Comercio e Servicos Ltda. Avenida Adelino Cardana, 293, 21 andar, Bethaville, Barueri SP, Brazil Tel: +55-11-4689-3000

Mexico Mitsubishi Electric Automation, Inc. Mexico Branch Boulevard Miguel de Cervantes Saavedra 301, Torre Norte Piso 5, Ampliacion Granada, Miguel Hidalgo, Ciudad de Mexico, Mexico, C.P.11520 Tel: +52-55-3067-7512

Germany Mitsubishi Electric Europe B.V. German Branch Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany Tel: +49-2102-486-0

UK Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, UK-Hatfield, Hertfordshire, AL10 8XB, U.K. Tel: +44-1707-28-8780

Italy Mitsubishi Electric Europe B.V. Italian Branch Centro Direzionale Colleoni - Palazzo Sirio, Viale Colleoni 7, 20864 Agrate Brianza (MB), Italy Tel: +39-039-60531

Spain Mitsubishi Electric Europe B.V. Spanish Branch Carretera de Rubi, 76-80-Apdo. 420, E-08190 Sant Cugat del Valles (Barcelona), Spain Tel: +34-935-65-3131

France Mitsubishi Electric Europe B.V. French Branch 25, Boulevard des Bouvets, 92741 Nanterre Cedex, France Tel: +33-1-55-68-55-68

Czech Mitsubishi Electric Europe B.V. Czech Branch Pekarska 621/7, 155 00 Praha 5, Czech Republic Tel: +420-255 719 200

Turkey Mitsubishi Electric Turkey A.S. Umraniye Branch Serifali Mahallesi Nutuk Sokak No:5, TR-34775 Umraniye / Istanbul, Turkey Tel: +90-216-526-3990

Poland Mitsubishi Electric Europe B.V. Polish Branch ul. Krakowska 48, 32-083 Balice, Poland Tel: +48-12-347-65-00

Russia Mitsubishi Electric (Russia) LLC St. Petersburg Branch Piskarevsky pr. 2, bld 2, lit "Sch", BC "Benua", office 720; 195027 St. Petersburg, Russia Tel: +7-812-633-3497

South Africa Adroit Technologies 20 Waterford Office Park, 189 Witkoppen Road, Fourways, South Africa Tel: +27-11-658-8100

China Mitsubishi Electric Automation (China) Ltd. Mitsubishi Electric Automation Center, No.1386 Hongqiao Road, Shanghai, China Tel: +86-21-2322-3030

Taiwan SETSUYO ENTERPRISE CO., LTD. 6F, No.105, Wugong 3rd Road, Wugu District, New Taipei City 24889, Taiwan Tel: +886-2-2299-2499

Korea Mitsubishi Electric Automation Korea Co., Ltd. 7F to 9F, Gangseo Hangang Xi-tower A, 401, Yangcheon-ro, Gangseo-Gu, Seoul 07528, Korea Tel: +82-2-3660-9569

Singapore Mitsubishi Electric Asia Pte. Ltd. 307 Alexandra Road, Mitsubishi Electric Building, Singapore 159943 Tel: +65-6473-2308

Thailand Mitsubishi Electric Factory Automation (Thailand) Co., Ltd. 12th Floor, SV.City Building, Office Tower 1, No. 896/19 and 20 Rama 3 Road, Kwaeng Bangpongpang, Khet Yannawa, Bangkok 10120, Thailand Tel: +66-2682-6522 to 31

Indonesia PT. Mitsubishi Electric Indonesia Gedung Jaya 8th Floor, JL. MH. Thamrin No.12, Jakarta Pusat 10340, Indonesia Tel: +62-21 3192-6461

Vietnam Mitsubishi Electric Vietnam Company Limited 11th & 12th Floor, Viettel Tower B, 285 Cach Mang Thang 8 Street, Ward 12, District 10, Ho Chi Minh City, Vietnam. Tel: +84-28-3910-5945

India Mitsubishi Electric India Pvt. Ltd. Pune Branch Emerald House, EL-3, J Block, M.I.D.C., Bhosari, Pune - 411026, Maharashtra, India Tel: +91-20-2710-2000

Australia MITSUBISHI ELECTRIC AUSTRALIA PTY. LTD. 348 Victoria Road, P.O. Box 11, Rydalmere, N.S.W 2116, Australia Tel: +61-2-9684-7777

HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN

When exported from Japan, this manual does not require application to the Ministry of Economy, Trade and Industry for service transaction permission.

Specifications subject to change without notice. Printed in Japan, January 2021.

Manualsnet FAQs

If you want to find out how the GOT2000 Mitsubishi works, you can view and download the Mitsubishi GOT2000 GT25-05PSGC Sheet User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Mitsubishi GOT2000 as well as other Mitsubishi manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Mitsubishi GOT2000. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Mitsubishi GOT2000 GT25-05PSGC Sheet User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Mitsubishi GOT2000 GT25-05PSGC Sheet User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Mitsubishi GOT2000 GT25-05PSGC Sheet User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Mitsubishi GOT2000 GT25-05PSGC Sheet User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Mitsubishi GOT2000 GT25-05PSGC Sheet User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.