This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in this manual.
Warranty Exclusion of loss in opportunity and secondary loss from warranty liability Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation to: (1) Damages caused by any cause found not to be the responsibility of
Mitsubishi. (2) Loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi
products. (3) Special damages and secondary damages whether foreseeable or not,
compensation for accidents, and compensation for damages to products other than Mitsubishi products.
(4) Replacement by the user, maintenance of on-site equipment, start-up test run and other tasks.
For safe use This product has been manufactured as a general-purpose part for general industries, and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life. Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger movement vehicles, consult with Mitsubishi Electric. This product has been manufactured under strict quality control. However when installing the product where major accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
JY997D62101E
Side A
Side
A
ENGLISH
CHINESE Side B
Safety Precaution (Read these precautions before using.)
Before using this product, please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly. The precautions given in this manual are concerned with this product. In this manual, the safety precautions are ranked as "WARNING" and "CAUTION".
Depending on circumstances, procedures indicated by "CAUTION" may also be linked to serious results. In any case, it is important to follow the directions for usage.
Indicates that incorrect handling may cause hazardous conditions, resulting in death or severe injury.
Indicates that incorrect handling may cause hazardous conditions, resulting in medium or slight personal injury or physical damage.
MOUNTING PRECAUTIONS
When attaching the protective sheet, make sure to fit it on the display section closely without leaving any clearance between them. Failure to do so may cause a malfunction.
STARTUP/MAINTENANCE PRECAUTIONS
Check the status of the protection sheet visually by to the daily inspection. When there is too much dirt and cracks, proceeds replacement promptly. Using the productive sheet of decreased visibility may cause a malfunction.
DISPOSAL PRECAUTIONS
When disposing of this product, treat it as industrial waste.
2014 MITSUBISHI ELECTRIC CORPORATION
Manual The following shows manuals relevant to this product.
Detailed Manual
For detailed manuals, refer to the PDF manuals stored in the DVD-ROM for the drawing software used.
Relevant Manuals For relevant manuals, refer to the Help or the PDF manuals stored in the DVD-ROM for the drawing software used. The latest manuals are also available from MITSUBISHI ELECTRIC FA Global Website (http://www.MitsubishiElectric.co.jp/fa).
Referenced Standard: GB/T15969.2 (Requirement of Chinese standardized law)
1. Overview The GT21 protective sheet (hereinafter called the protective sheet) protects the GOT display surface from blemishes or stains while touch keys are operated. Select the clear sheet (display section) if luminance is more important, and select the antiglare sheet (display section) if antireflection is more important.
The following protective sheets are available:
Manual name Manual number (Model code)
GOT2000 Series Users Manual (Hardware) SH-081194ENG-A (1D7MJ5)
GOT2000 Series Users Manual (Utility) SH-081195ENG-A (1D7MJ6)
Model name Contents
For GT2103 GT21-03PSGC-UC Antiglare type, 5 sheets
GT21-03PSCC-UC Clear type, 5 sheets
For GT2104R GT21-04RPSGC-UC Antiglare type, 5 sheets
GT21-04RPSCC-UC Clear type, 5 sheets
For GT2104P GT21-04PSGC-UC Antiglare type, 5 sheets
GT21-04PSCC-UC Clear type, 5 sheets
For GT2105 GT21-05PSGC Antiglare type, 5 sheets
GT21-05PSCC Clear type, 5 sheets
2. Part Names and External Dimensions
(For GT2103, GT2104R, GT2104P)
(For GT2105)
3. Operating atmosphere Must be free of lamp black, corrosive gas, flammable gas, or excessive amount of electroconductive dust particles and must be no direct sunlight. (Same as for saving) General specifications other than the above are same as those of the GOT main unit. Refer to the following.
GOT2000 Series User's Manual
Type A B
For GT2103 110 mm (4.34") 71 mm (2.8")
For GT2104R 125 mm (4.93") 99 mm (3.9")
For GT2104P 142 mm (5.6") 73 mm (2.88")
Protective film
Release paper
Adhesive part
160 (6.3")
13 1
(5 .1
6" )
Unit: mm (inch)
Adhesive part
4. Installation Procedure
1) If a protective sheet is on the GOT, peel off the protective sheet from the bottom-right corner of the GOT display section, and clean the GOT surface.
2) Peel the release paper from the back of the new protective sheet, and attach its adhesive side to the GOT display section. When attaching the protect ive sheet, make sure to fit it on the display section closely without leaving any clearance between them.
3) Peel off the protective film on the protective sheet.
GT21-05PSC, GT21-04RPSC-UC, GT21-04PSC-UC, GT21-03PSC-UC
GT21 Protective Sheet General Description
This manual describes the part names, dimensions, mounting, and specifications of the product. Before use, read this manual and manuals of relevant products fully to acquire proficiency in handling and operating the product. Make sure to learn all the product information, safety information, and precautions. And, store this manual in a safe place so that you can take it out and read it whenever necessary. Always forward it to the end user. Registration Ethernet is a trademark of Xerox Corporation in the United States.The company name and the product name to be described in this manual are the registered trademarks or trademarks of each company.
Effective Jun. 2018 Specifications are subject to change without notice.
Manual Number JY997D62101E
Date Jun. 2018