User's Manual GT15-90PSCB GT15-90PSCW GT15-90PSGB GT15-90PSGW GT15-80PSCB GT15-80PSCW GT15-80PSGB GT15-80PSGW GT15-70PSCB GT15-70PSCW GT15-70PSGB GT15-70PSGW GT15-60PSCB GT15-60PSCW GT15-60PSGB GT15-60PSGW GT15-50PSCB GT15-50PSCW GT15-50PSGB GT15-50PSGW
Thank you for purchasing the GOT1000 Series.
GT15 PROTECTIVE SHEET
Prior to use, please read both this manual and detailed manual thoroughly to fully understand the product.
MODEL GT15-PS-U
MODEL CODE 1D7M01
IB(NA)-0800295-D(0603)MEE
SAFETY PRECAUTIONS (Always read these precautions before using this equipment.)
Before using this product, please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly. The precautions given in this manual are concerned with this prod- uct. In this manual, the safety precautions are ranked as "DANGER" and "CAUTION".
Note that the CAUTION level may lead to a serious accident according to the circumstances. Always follow the precautions of both levels because they are impor- tant to personal safety. Please save this manual to make it accessible when required and always forward it to the end user.
Indicates that incorrect handling may cause hazardous conditions, resulting in death or severe injury.
Indicates that incorrect handling may cause hazardous conditions, resulting in medium or slight personal injury or physical damage.
DANGER
CAUTION
[INSTALLATION PRECAUTIONS]
[STARTUP AND MAINTENANCE PRECAUTIONS]
[DISPOSAL PRECAUTIONS]
Manuals
The following shows manuals relevant to this product.
For relevant manuals, refer to the PDF manual stored within the drawing software used.
2004 MITSUBISHI ELECTRIC CORPORATION
When attaching the protective sheet onto the GOT display section, make sure to fit the protective sheet onto the section closely without leaving any clearance between them. Failure to do so may cause a malfunction
Daily check the protective sheet with eyes. When you find extreme dirt or scratches on the surface, immediately replace it with new one. Using the productive sheet of decreased visibility may cause a malfunction.
Dispose of this product as industrial waste.
Detailed Manual
Manual name Manual number (Type code)
GT15 User's Manual (Option)
SH-080528ENG (1D7M23)
Relevant Manuals
CAUTION
CAUTION
CAUTION
1. Overview
This User's Manual describes the GT15 protective sheet (hereafter abbreviated to the protective sheet). There are the following protective sheet types. Refer to the GT15 User's Manual for the applicable GOT.
*1 The frame is white. Use it when making the GOT front section (other than the display section) white.
Use the protective sheet to protect the display section surface from scratches and dirt when operating the touch keys on the GOT display section. Select the clear protective sheet when the display intensity is more required, or select the antiglare protective sheet when prevention of reflections is more required.
Product name Model name Description
Protective sheet
GT15-90PSCB 15" protective sheet Clear
GT15-90PSGB 15" protective sheet Antiglare
GT15-90PSCW *1 15" protective sheet Clear (Frame: White)
GT15-90PSGW *1 15" protective sheet Antiglare (Frame: White)
GT15-80PSCB 12.1" protective sheet Clear
GT15-80PSGB 12.1" protective sheet Antiglare
GT15-80PSCW *1 12.1" protective sheet Clear (Frame: White)
GT15-80PSGW *1 12.1" protective sheet Antiglare (Frame: White)
GT15-70PSCB 10.4" protective sheet Clear
GT15-70PSGB 10.4" protective sheet Antiglare
GT15-70PSCW *1 10.4" protective sheet Clear (Frame: White)
GT15-70PSGW *1 10.4" protective sheet Antiglare (Frame: White)
GT15-60PSCB 8.4" protective sheet Clear
GT15-60PSGB 8.4" protective sheet Antiglare
GT15-60PSCW *1 8.4" protective sheet Clear (Frame: White)
GT15-60PSGW *1 8.4" protective sheet Antiglare (Frame: White)
GT15-50PSCB 5.7" protective sheet Clear
GT15-50PSGB 5.7" protective sheet Antiglare
GT15-50PSCW *1 5.7" protective sheet Clear (Frame: White)
GT15-50PSGW *1 5.7" protective sheet Antiglare (Frame: White)
2. Part Names and External Dimensions
(1) 15"/12.1"/10.4"/8.4" protective sheet
Unit: mm (inch)
(2) 5.7" protective sheet
Unit :mm (inch)
Item A B
15" Protective sheet 381 (15.0) 280 (11.0)
12.1" Protective sheet 310 (12.2) 236 (9.3)
10.4" Protective sheet 297 (11.7) 208 (8.2)
8.4" Protective sheet 235 (9.3) 184 (7.2)
Item A B 5.7" protective sheet 160(6.3) 131(5.12)
B
A
Hole for mounting USB environmental protection cover
Pinch this part and remove the old protective sheet from the GOT.
In the case of GT15-W, the frame (shaded area) is white.
Remove the sheet's Protective Film
A
B
Remove the sheet's Protective Film
Hole for mounting USB environmental protection cover
Pinch this part and remove the old protective sheet from the GOT.
In the case of GT15-W, the frame (shaded area) is white.
3. Installation Procedure
(1) Remove the old protective sheet from the GOT, and clean the GOT surface. (Peel the protective sheet off slowly.)
(2) Peel the release paper from the back of the new protective sheet, and attach its adhesive side to the GOT display section. When attaching the protective sheet, make sure to fit it on the display section closely without leaving any clearance between them.
(3) Peel the protective film off the protective sheet.
Warranty Mitsubishi will not be held liable for damage caused by factors found not to be the cause of Mitsubishi; machine damage or lost profits caused by faults in the Mitsubishi products; damage, secondary damage, accident compensation caused by special factors unpredictable by Mitsubishi; damages to products other than Mitsubishi products; and to other duties.
For safe use This product has been manufactured as a general-purpose part for
general industries, and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life.
Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger movement vehicles, consult with Mitsubishi.
This product has been manufactured under strict quality control. However, when installing the product where major accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.
Country/Region Sales office/Tel
U.S.A Mitsubishi Electric Automation Inc. 500 Corporate Woods Parkway Vernon Hills, IL 60061 Tel : +1-847-478-2100
Brazil MELCO-TEC Rep. Com.e Assessoria Tecnica Ltda. Rua Correia Dias, 184, Edificio Paraiso Trade Center-8 andar Paraiso, Sao Paulo, SP Brazil Tel : +55-11-5908-8331
Germany Mitsubishi Electric Europe B.V. German Branch Gothaer Strasse 8 D-40880 Ratingen, GERMANY Tel : +49-2102-486-0
U.K Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Herts., AL10 8XB,UK Tel : +44-1707-276100
Italy Mitsubishi Electric Europe B.V. Italian Branch Centro Dir. Colleoni, Pal. Perseo-Ingr.2 Via Paracelso 12, 20041 Agrate B., Milano, Italy Tel : +39-039-6053344
Spain Mitsubishi Electric Europe B.V. Spanish Branch Carretera de Rubi 76-80 08190 - Sant Cugat del Valles, Barcelona, Spain Tel : +34-93-565-3131
France Mitsubishi Electric Europe B.V. French Branch 25 Boulevard des Bouvets, F-92741 Nanterre Cedex, France TEL: +33-1-5568-5568
South Africa Circuit Breaker Industries LTD. Tripswitch Drive, Elandsfontein Gauteng, South Africa Tel : +27-11-928-2000
Hong Kong Ryoden Automation Ltd. 10th Floor, Manulife Tower, 169 Electric Road, North Point, HongKong Tel : +852-2887-8870
China Ryoden Automation Shanghai Ltd. 3F Block5 Building Automation Instrumentation Plaza 103 Cao Bao Rd. Shanghai 200233 China Tel : +86-21-6120-0808
Taiwan Setsuyo Enterprise Co., Ltd. 6F., No.105 Wu-Kung 3rd.RD, Wu-Ku Hsiang, Taipei Hsine, Taiwan Tel : +886-2-2299-2499
Korea HAN NEUNG TECHNO CO.,LTD. 1F Dong Seo Game Channel Bldg.,660-11, Deungchon-dong Kangsec-ku, Seoul, Korea Tel : +82-2-3660-9552
Singapore Mitsubishi Electric Asia Pte, Ltd. 307 Alexandra Road #05-01/02, Mitsubishi Electric Building Singapore 159943 Tel : +65-6473-2308
Thailand F. A. Tech Co.,Ltd. 898/28,29,30 S.V.City Building,Office Tower 2, Floor 17-18 Rama 3 Road, Bangkpongpang, Yannawa, Bangkok 10120 Tel : +66-2-682-6522
Indonesia P.T. Autoteknindo SUMBER MAKMUR Jl. Muara Karang Selatan Block a Utara No.1 Kav. No.11 Kawasan Industri/Pergudangan Jakarta - Utara 14440 Tel : +62-21-663-0833
India Messung Systems Put,Ltd. Electronic Sadan NO:111 Unit No15, M.I.D.C BHOSARI, PUNE-411026, India Tel : +91-20-712-2807
Australia Mitsubishi Electric Australia Pty. Ltd. 348 Victoria Road, PostalBag, No 2, Rydalmere, N.S.W 2116, Australia Tel : +61-2-9684-7777
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
When exported from Japan, this manual does not require application to the Ministry of Economy, Trade and Industry for service transaction permission.
Specifications subject to change without notice. Printed in Japan on recycled paper.