Contents

Mitsubishi GT25 Mobile App Operating Manual PDF

1 of 60
1 of 60

Summary of Content for Mitsubishi GT25 Mobile App Operating Manual PDF

Pocket GOT Operating Manual

-GOT2000 Series (GT27, GT25, GT23 (Some Functions Only), and GT21 (Some Functions Only)) -GT SoftGOT2000 (Some Functions Only) -GOT SIMPLE Series (Some Functions Only) -Android

1

SAFETY PRECAUTIONS Always read the precautions before using this product. Also read this manual and the relevant manuals mentioned in this manual carefully, and use the product properly while paying full attention to safety. Note that the precautions in this manual apply only to this product. The safety precautions are divided into the following levels: warnings and cautions.

Note that failure to observe CAUTION may lead to a serious accident depending on the circumstances. Make sure to observe both warnings and cautions to ensure personal safety. Ensure that this manual is easily accessible to all users of this product.

[Precautions for Remote Control]

[Design Precautions]

WARNING Remote control is available through a network by using GOT functions, including the SoftGOT-GOT

link function, the remote personal computer operation function, the VNC server function, and the GOT Mobile function. If these functions are used to perform remote control of control equipment, the field operator may not notice the remote control, possibly leading to an accident. In addition, a communication delay or interruption may occur depending on the network environment, and remote control of control equipment cannot be performed normally in some cases. Before using the above functions to perform remote control, fully grasp the circumstances of the field site and ensure safety.

When operating the server (GOT) of the GOT Mobile function to disconnect a client, notify the operator of the client about the disconnection beforehand. Not doing so may cause an accident.

WARNING To maintain the security (confidentiality, integrity, and availability) of the GOT and the system against

unauthorized access, DoS*1 attacks, computer viruses, and other cyberattacks from unreliable networks and devices via network, take appropriate measures such as firewalls, virtual private networks (VPNs), and antivirus solutions. Mitsubishi Electric shall have no responsibility or liability for any problems involving GOT trouble and system trouble by unauthorized access, DoS attacks, computer viruses, and other cyberattacks. *1 DoS: A denial-of-service (DoS) attack disrupts services by overloading systems or exploiting vulnerabilities, resulting in a denial-of-service (DoS) state.

WARNING

CAUTION

Indicates that incorrect handling may cause hazardous conditions, resulting in death or severe injury.

Indicates that incorrect handling may cause hazardous conditions, resulting in minor or moderate injury or property damage.

2

[Precautions for Exclusive Authorization Control]

WARNING Make sure to fully understand the GOT network interaction function before using this function to

control the authorization among pieces of equipment to prevent simultaneous operations. The exclusive authorization control of the GOT network interaction function can be enabled or disabled for each screen. (For all screens, the exclusive authorization control is disabled by default.) Properly determine the screens for which the exclusive authorization control is required, and set the control by screen. A screen for which the exclusive authorization control is disabled can be operated simultaneously from pieces of equipment. Make sure to determine the operation period for each operator, fully grasp the circumstances of the field site, and ensure safety to perform operations.

3

C O

N TE

N TS

CONTENTS SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 RELEVANT MANUALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 TERM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

CHAPTER 1 FEATURES 7

CHAPTER 2 INSTALLATION PROCEDURE OF POCKET GOT 9

CHAPTER 3 START AND DISPLAY SCREEN OF POCKET GOT 11

CHAPTER 4 SETUP FOR USING POCKET GOT 13 4.1 GOT Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.2 Mobile Terminal Settings (Wi-Fi Setting). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.3 Registration of Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 4.4 Registration of Alarm Notification Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 4.5 Working Memo Transmission Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 4.6 GOT Mobile Connection Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4.7 Updating and Deleting the Connection Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

CHAPTER 5 ALARM RECEPTION 25 5.1 Checking Received Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 5.2 Checking Alarms of Each GOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 5.3 Changing the GOT to be Monitored. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5.4 Reordering the Icons in the Connected GOT List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 5.5 Receiving Notifications on a Smart Watch via the Mobile Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 5.6 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

CHAPTER 6 SENDING WORKING MEMO 37 6.1 Working Memo Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 6.2 Functions of Working Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 6.3 Menu for Working Memo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 6.4 Interacting with Process Remote Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

CHAPTER 7 DISPLAYING MOBILE SCREEN 41 7.1 How to Display Mobile Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

CHAPTER 8 TROUBLESHOOTING 43

CHAPTER 9 RESTRICTIONS 45

CHAPTER 10 OPEN SOURCE SOFTWARE 47 10.1 Arc.UserDialogs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 10.2 NETStandard.Library. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 10.3 Newtonsoft.Json . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 10.4 Prism.Unity.Forms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 10.5 ReactiveProperty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 10.6 Rg.Plugins.Popup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

4

10.7 System.ComponentModel.Annotations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 10.8 System.Threading.Tasks.Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 10.9 Xamarin.Essentials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 10.10 Xamarin.Forms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

CHAPTER 11 Upgraded Additional Function List 53 REVISIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 INTELLECTUAL PROPERTY RIGHTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

5

INTRODUCTION Thank you for downloading Pocket GOT Mobile App (hereafter referred to as Pocket GOT). This manual describes the features of Pocket GOT, installation procedure, uninstallation procedure, and how to use the app. Before using the product, read this manual carefully and make sure you understand the functions and performance of Pocket GOT for correct use.

RELEVANT MANUALS The following shows the manuals relevant to this product. If you need the printed manuals, consult your local sales office.

Manual list

e-Manual refers to the Mitsubishi Electric FA electronic book manuals that can be browsed using a dedicated tool. e-Manual has the following features: Required information can be cross-searched in multiple manuals. Other manuals can be accessed from the links in the manual. Hardware specifications of each part can be found from the product figures. Pages that users often browse can be bookmarked. Sample programs can be copied to the engineering tool.

GOT manuals

Manual related to iQ Monozukuri Process Remote Monitoring

Manual name Manual number (Model code)

Format

GT Designer3 (GOT2000) Screen Design Manual SH-081220ENG (1D7ML9)

PDF e-Manual

GT SoftGOT2000 Version1 Operating Manual SH-081201ENG PDF e-Manual

Manual name Manual number (Model code)

Format

Instruction manual for iQ Monozukuri Process Remote Monitoring SH-082168ENG PDF e-Manual

6

TERM Unless otherwise specified, this manual uses the following terms.

Term Description Pocket GOT A mobile application that can be run on Android OS

iQ Monozukuri Process Remote Monitoring An application package to collect multiple production line information on a personal computer through the on-site GOTs and display the information on a GT SoftGOT2000 module in the computer to monitor the lines or manage the process

Working memo Information recorded using the working memo function of Pocket GOT Daily work reports, field equipment status reports, and other information can be recorded with texts and images from a mobile terminal.

User alarm Alarms set by the user and collected on the GOT A user-created comment can be displayed as an alarm message when an alarm occurs. Pocket GOT's user alarm receive function enables you to check the user alarm occurring in the GOT on a mobile terminal.

GOT Mobile function A function for monitoring connected devices from an information device (such as a tablet device) via GOTs

VNC server function A function to operate GOTs remotely from a personal computer, which is in a remote location, via Ethernet using Virtual Network Computing (VNC)

GT SoftGOT2000 An abbreviation for the monitoring software, GT SoftGOT2000 Version1 GT SoftGOT2000 is the software that has the same functions as the GOT2000 Series and is used to display lamps, data, and messages on personal computers and panel controllers.

GT Designer3 Software to design screens for the GOT2000 Series

1 FEATURES 7

1 1 FEATURES

Receiving user alarms Pocket GOT collects the conditions of user alarms occurring in the GOT being monitored, and notifies the users with sound and vibration when detecting the following alarm status changes. Occurred Checked Reset The app also notifies the users with sound and vibration of the app log when failing to obtain alarms from the GOT. Checked, Reset, and app logs are notified only when the mobile terminal is not in sleep mode. User alarms worth of up to 40 alarm IDs are displayed. Up to five alarms can be displayed in one alarm ID. Up to 20 GOTs can be registered in Pocket GOT. By using the GOT Mobile function, you can check the status of the GOT where the user alarm has occurred on the mobile terminal. For details on user alarms and the GOT Mobile function, refer to the following. GT Designer3 (GOT2000) Screen Design Manual The following shows which models support alarm receiving and the GOT Mobile function. : Available, : Not available

*1 It is recommended to use GT SoftGOT2000 (Multiple channels) for GT SoftGOT2000.

Pocket GOT's user alarm receive function uses the GOT Mobile function to receive alarms. To use the GOT Mobile function, purchase a GOT Mobile function license. Register the purchased license number to the monitored GOT.

Model Availability GT27

GT25

GT23

GT21

GT SoftGOT2000 *1

GS21

8 1 FEATURES

Sending working memos The working memos of Pocket GOT can be used to share the information on the on-site equipment and status report at the time of error occurrence. The following working memos can be created with the mobile application Pocket GOT. Text memo Memo with pictures taken Memo with images saved in the mobile terminal The created working memos can be sent to the connected GOT using the FTP function of the GOT and saved in the SD card installed in the GOT. iQ Monozukuri Process Remote Monitoring collects the working memos saved in the SD card of the GOT so that they can be checked at once on the personal computer. For the details of iQ Monozukuri Process Remote Monitoring, refer to the following. Instruction manual for iQ Monozukuri Process Remote Monitoring

The following shows which models support working memo. : Available, : Available to some models only, : Not available

*1 Only available to the following models that support the FTP server function. GT2107-W GT2104-R GT2104-PMBD GT2103-PMBD

Model Availability GT27

GT25

GT23

GT21 *1

GT SoftGOT2000

GS21

HUB

router

Receive a user alarm

Send a working memo

iQ Monozukuri Process Remote Monitoring

Collect working memos

2 INSTALLATION PROCEDURE OF POCKET GOT 9

2

2 INSTALLATION PROCEDURE OF POCKET GOT Install Pocket GOT to the mobile terminal. Check Google Play for the operating environment of the Android OS mobile terminal to which Pocket GOT is to be installed.

Download from Google Play Download Pocket GOT from Google Play and install it to the mobile terminal.

1. Enter [Pocket GOT] or [MITSUBISHI ELECTRIC CORPORATION] in Google Play, and search for the Pocket GOT application.

2. Download the application, and Pocket GOT is installed. Check that the icon of Pocket GOT is displayed on the home screen.

Update Update Pocket GOT when the latest version is released. After the update is complete, check that Pocket GOT is updated to the latest version.

Uninstall Select Pocket GOT and uninstall it.

10 2 INSTALLATION PROCEDURE OF POCKET GOT

MEMO

3 START AND DISPLAY SCREEN OF POCKET GOT 11

3

3 START AND DISPLAY SCREEN OF POCKET GOT

Starting Pocket GOT Tap the icon of Pocket GOT on the home screen of the mobile terminal.

12 3 START AND DISPLAY SCREEN OF POCKET GOT

Display screen When Pocket GOT is started, the [Connected GOT list] screen is displayed. The following screens can be displayed by operating the [Connected GOT list] screen.

[Connected GOT list] screen

[System setting] screen

Check the alarms on [Alarm list]Check the details on the mobile screen

Create a working memo on [Working memo]

Send the working memo to the GOT

[Monitor target batch edit] screen

[Connected GOT setting] screen

[Sort connected GOT list] screen

4 SETUP FOR USING POCKET GOT 13

4

4 SETUP FOR USING POCKET GOT This chapter describes the settings for using the GOT as an access point.

Required devices Prepare the following devices before configuring the settings. Personal computer on which GT Designer3 is installed GOT to which a wireless LAN communication unit is connected Mobile terminal (Android device) on which Pocket GOT is installed

Setting procedure The following describes the setting procedure to use Pocket GOT.

1. GOT settings Configure the settings required for the GOT to communicate with Pocket GOT. Page 14 GOT Settings

2. Mobile terminal settings Configure the settings required for the mobile terminal to communicate with the GOT. Page 16 Mobile Terminal Settings (Wi-Fi Setting)

3. Pocket GOT settings Configure the settings required to use Pocket GOT on the mobile terminal. Page 18 Registration of Basic Settings Page 20 Registration of Alarm Notification Setting Page 22 Working Memo Transmission Setting Page 23 GOT Mobile Connection Setting

14 4 SETUP FOR USING POCKET GOT 4.1 GOT Settings

4.1 GOT Settings Configure the GOT settings required to receive alarms and send working memos with Pocket GOT. Configure the settings with GT Designer3. For the details of the setting method, refer to the following manual. GT Designer3 (GOT2000) Screen Design Manual

Wireless LAN setting The GOT operates as a wireless LAN access point. Connect Pocket GOT and the GOT for which the wireless LAN is set via Wi-Fi.

User alarm observation A user-created comment is displayed as an alarm message when an alarm occurs in the GOT. Pocket GOT receives and displays the alarm occurred in the connected GOT.

[GOT Ethernet Setting][GOT Setup]

[User Alarm Observation]

4 SETUP FOR USING POCKET GOT 4.1 GOT Settings 15

4

GOT Mobile function The GOT operates as a GOT Mobile function server. Pocket GOT displays the mobile screen of the connected GOT on the browser of the mobile terminal.

FTP server function You can read/write files from/to an FTP client using the GOT as the FTP server. Pocket GOT (FTP client) sends working memos to the FTP server (GOT), and saves the memos to the SD card inserted in the GOT.

[GOT Mobile Setting] ([Basic Setting]) [GOT Mobile Setting] ([Authentication Setting])

[Controller Setting]

16 4 SETUP FOR USING POCKET GOT 4.2 Mobile Terminal Settings (Wi-Fi Setting)

4.2 Mobile Terminal Settings (Wi-Fi Setting) Configure the Wi-Fi setting in the mobile terminal to enable connection to the GOT which is set as the access point of the wireless LAN.

The Wi-Fi setting screen differs depending on the mobile terminal. For the details, refer to the manual of the mobile terminal used. The following model is used in this chapter. Manufacturer: SHARP Model name: AQUOS Sense3 plus Model: SH-RM11 OS: Android 9

1. Select the GOT to be used as the access point. Display the Wi-Fi setting screen of the mobile terminal, and tap the name set in [SSID] in [GOT Setup] in GT Designer3.

2. Set the details of the access point. Enter [Password], tap [Advanced options], and change [IP settings] from [DHCP] to [Static]. Then, the IP address of the mobile terminal can be set.

Tap the name set in [SSID]

Tap [Advanced options]

Tap [DHCP] in [IP settings]

Tap [Static]

Enter [Password]

4 SETUP FOR USING POCKET GOT 4.2 Mobile Terminal Settings (Wi-Fi Setting) 17

4

3. Set the IP address of the mobile terminal. Set the first to third octets to the same values as the IP address of the GOT. Set the fourth octet to a value different from the IP address of the GOT. The following shows the setting example when the IP address of the GOT is set to [192.168.4.20].

Return to the Wi-Fi setting screen. If [Connected] is displayed, the access point setting is complete.

1 9 2 . 1 6 8 . 4 . 2 1

Set the same values as the GOT IP address

Set a different value from the GOT IP address

Mobile terminal IP address :

1 9 2 . 1 6 8 . 4 . 2 0GOT IP address :

Tap [IP Address]

Enter the IP address to be set for the mobile terminal

When [Connected] is displayed, the setting is complete

18 4 SETUP FOR USING POCKET GOT 4.3 Registration of Basic Settings

4.3 Registration of Basic Settings Configure the settings required to register the basic settings of the connected GOT.

Registration of a new connection 1. Tap [Basic settings] on the [Connected GOT setting] screen.

2. Set each item on the [Basic settings] screen.

3. After entering each item, tap the arrow on the upper-left corner of the [Basic settings] screen to return to the [Connected GOT setting] screen.

Tap [Register] on the [Connected GOT setting] screen to complete the registration.

No. Item Description 1) Display image Set the image to be displayed on the [Connected GOT list] screen.

2) [Name] Set a name of the connected GOT.

3) [IP address] Set the IP address of the connected GOT.

4) [Register] Register the information set in the [Basic settings] screen. If there is any problem with the settings, an error message is displayed.

2)

3)

1) Tap to display the [Basic Setting] screen

4)

Tap [Register]

Tap

4 SETUP FOR USING POCKET GOT 4.3 Registration of Basic Settings 19

4

Registration by utilizing the registered connection 1. Tap [Utilize] from the menu on the [Connected GOT setting] screen.

2. [Utilized GOT] is displayed. Select the source GOT from the list of registered GOTs.

3. Tap [Basic settings] on the [Connected GOT setting] screen displayed. The [Basic settings] screen of the source GOT is displayed. Utilize the settings and register them. The items to be set are the same as those for a new registration.

Tap to display [Utilized GOT]

Select the utilized GOT

Tap

20 4 SETUP FOR USING POCKET GOT 4.4 Registration of Alarm Notification Setting

4.4 Registration of Alarm Notification Setting Configure the settings required to register the alarm notification setting.

1. Tap [Alarm notification setting] on the [Connected GOT setting] screen.

2. Set each item on the [Alarm notification setting] screen.

No. Item Description 1) [Port No.] Set the port number to communicate with the GOT.

2) [GOT Mobile operator name] Set the operator name to log in to the GOT Mobile.

3) [GOT Mobile password] Set the password to log in to the GOT Mobile.

4) [Alarm cycle (All GOT common setting)] Set the alarm cycle.

5) [Set as the monitor target] Set the GOT as the monitor target.

6) [Alarm status notification] Set whether to notify the mobile terminal of the alarm status when an alarm is checked or reset. [Notify "Checked" (only when released from sleep)] [Notify "Restored" (only when released from sleep)]

Notification is not provided when the mobile terminal is in sleep mode. Even though this setting is disabled, only the alarms whose statuses are Occurred are notified in the following cases within one alarm cycle of Pocket GOT. An alarm occurred and it was checked. An alarm occurred and it was reset.

For notification when this setting is disabled, refer to the following. Page 35 Alarms to be notified

7) [Notification priority setting]

If multiple alarms occur simultaneously in one connected GOT, the alarms are notified according to the settings for [Priority item (only when released from sleep)] and [Priority order (only when released from sleep)]. If there are multiple high-priority alarms, the notifications are prioritized in the following order. 1: Alarm occurrence date and time (descending order) 2: Alarm ID (ascending order) 3: Monitored alarm No. (ascending order) If the mobile terminal is in sleep mode, this setting is not applied. The alarm with the most recent occurrence date and time is prioritized.

[Priority item (only when released from sleep)]

Set the priority item for notification. [Alarm update date and time]: Update date and time of the alarm occurred, checked, and reset [Level]: Level of the alarm [Alarm status]: Occurred, checked, or reset

[Priority order (only when released from sleep)]

Set the priority order for the item set for [Priority item (only when released from sleep)].*1

[Ascending] [Descending]

8) [Comment column No.] Select the comment column No. to be displayed in the user alarm.

9) [Test communication] Perform a test communication with the GOT.

10) [Register] Register the information set in the [Connected GOT setting] screen.

1)

2)

3)

4)

5)

6)Tap to display the [Alarm notification setting] screen

7)

10)

8)

9)

4 SETUP FOR USING POCKET GOT 4.4 Registration of Alarm Notification Setting 21

4

*1 The following shows the ascending and descending orders for each priority item.

Priority item Descending order Ascending order [Alarm update date and time]

Oldest to newest Newest to oldest

[Level] Lowest to highest Highest to lowest

[Alarm status] Checked reset occurred Occurred reset checked

22 4 SETUP FOR USING POCKET GOT 4.5 Working Memo Transmission Setting

4.5 Working Memo Transmission Setting Configure the settings required to send working memos.

1. Tap [Working memo transmission setting] on the [Connected GOT setting] screen.

2. Set each item on the [Working memo transmission setting] screen.

No. Item Description 1) [FTP login name] Enter the login name to log in to the FTP server (GOT).

2) [FTP password] Enter the password to log in to the FTP server (GOT).

3) [Register] Register the information set in the [Working memo transmission setting] screen.

1)

2)Tap to display the [Working memo transmission setting] screen

3)

4 SETUP FOR USING POCKET GOT 4.6 GOT Mobile Connection Setting 23

4

4.6 GOT Mobile Connection Setting Configure the settings required to display the mobile screen.

1. Tap [GOT Mobile connection setting] on the [Connected GOT setting] screen.

2. Set each item on the [GOT Mobile connection setting] screen.

No. Item Description 1) [Port No.] Set the port number to communicate with the GOT.

2) [Client No.] Set the client No. of the GOT Mobile function.

3) [Initial display screen No.] Set the number of the mobile screen to be displayed for the first time.

4) [Auto fit] Automatically adjusts the mobile screen display according to the screen size of the mobile terminal.

5) [Hide menu] Hides the menu when the mobile screen is displayed.

6) [Andon login] Displays the mobile screen as an ANDON display.

7) [Display disconnection screen] Displays the disconnection screen when the communication of the GOT Mobile function is disconnected.

8) [Register] Register the information set in the [GOT Mobile connection setting] screen.

1)

2)

3)

4)

Tap to display the [GOT Mobile connection setting] screen

5)

6)

7)8)

24 4 SETUP FOR USING POCKET GOT 4.7 Updating and Deleting the Connection Setting

4.7 Updating and Deleting the Connection Setting Update or delete information of the GOT set on the [Connected GOT list] screen.

Updating the information of the registered connection 1. Tap [Connected GOT setting] from the menu of [Alarm list] or [Working memo].

2. The [Connected GOT setting] screen is displayed. Edit each setting.

3. After the editing is complete, return to the [Connected GOT setting] screen and tap [Update].

Deleting the registered connection 1. Tap [Connected GOT setting] from the menu of [Alarm list] or [Working memo].

2. The [Connected GOT setting] screen is displayed. Tap [Delete].

3. [Do you delete this connection setting?] is displayed. Select [Delete].

Tap to display the [Connected GOT setting] screen

Edit each setting

Update after editing

Select [Delete]

Tap [Delete]

Tap to display the [Connected GOT setting] screen

5 ALARM RECEPTION 5.1 Checking Received Alarms 25

5

5 ALARM RECEPTION

5.1 Checking Received Alarms Unread alarms can be checked with the number of GOTs with alarms and status icons on the [Connected GOT list] screen. When alarms are received while the application is hidden, the mobile terminal notification function displays the notifications from the connected GOTs individually on the lock screen or home screen. If alarms are received from multiple connected GOTs, the notifications are displayed altogether. The display, however, may differ depending on the specifications of the mobile terminal. When the application is displayed with notifications displayed, the notifications are deleted.

To receive alarm notifications, set the mobile terminal not to restrict the use of applications in the background. It can be set as follows in the case of the reference model (AQUOS Sense3 plus) used in this manual. [Settings App] [Apps & notifications] [Pocket GOT] [Advanced] [Battery] [Background restriction]

No. Item Description 1) All alarm monitor button In the ON state, communication is established with the GOT at the set monitoring cycle to acquire alarm

information. During alarm monitoring, the [Monitoring all alarms.] notification is always displayed. In the OFF state, alarm monitoring is not performed.

2) Number of GOTs with alarms Displays the number of GOTs with unread alarms.

3) Reload button Tap this button to start communication with the GOT to be monitored for alarms and acquire information on the alarms that are currently occurring.

4) Status icon A green icon is displayed when communication with the GOT is enabled and there are any unread alarms. A gray icon is displayed when communication with the GOT is disabled regardless of whether there is any unread alarm or not. No icon is displayed when communication with the GOT is enabled and either of the following cases applies. There is no unread alarm. Unread alarms have just been read.

When the application is hidden, the notification is displayed at receipt of an alarm.

2)

Tap the notification

When no alarm occurs When an alarm occurs

3)

4)

1) Notification displayed when 1) is ON

26 5 ALARM RECEPTION 5.1 Checking Received Alarms

Alarm notification display The alarm notification display differs depending on whether the mobile terminal screen is on or off. When the mobile terminal screen is turned on, the alarm display changes to the display of when the screen is on. The following shows notification display examples. Example of notification display when the screen is off (sleep mode)

Example of notification display when the screen is on

5 ALARM RECEPTION 5.2 Checking Alarms of Each GOT 27

5

5.2 Checking Alarms of Each GOT

Alarm list display Tap the GOT to be checked for alarms on the [Connected GOT list] screen to display [Alarm list]. The following items are displayed in [Alarm list]. [Application log] If no alarm can be acquired from the GOT, the cause is displayed. [User alarm] The alarms acquired from the GOT are displayed. User alarms worth of up to 40 alarm IDs are displayed. Up to five alarms can be displayed within one alarm ID.

[Application log details] display Tap the application log displayed on [Alarm list] to display [Application log details].

Tap the GOT to check alarms

Tap the application log

28 5 ALARM RECEPTION 5.2 Checking Alarms of Each GOT

[User alarm details] display Tap the user alarm displayed on [Alarm list] to display [User alarm details].

Alarm sorting Tap the menu button on [Alarm list] and tap [Sort] to display [Select the sort key]. Select the key to sort the alarms.

Tap the user alarm

Tap [Sort]

Tap the menu button

5 ALARM RECEPTION 5.2 Checking Alarms of Each GOT 29

5

Alarm filtering Tap the menu button on [Alarm list] and tap [Filter] to display [Filter]. Select a filter to narrow down the alarms.

Tap [Filter].

Tap the menu button.

30 5 ALARM RECEPTION 5.3 Changing the GOT to be Monitored

5.3 Changing the GOT to be Monitored The following describes how to change the GOT to be monitored.

1. Tap [Monitor target batch edit] in the menu on the [Connected GOT list] screen to display the [Monitor target batch edit] screen.

2. Tap the monitoring button to change the GOT to be monitored.

Monitoring buttonTap to display the [Monitor target batch edit] screen

5 ALARM RECEPTION 5.4 Reordering the Icons in the Connected GOT List 31

5

5.4 Reordering the Icons in the Connected GOT List The icons on the [Connected GOT list] screen can be reordered with the move buttons. Four move buttons are provided as shown below.

The following shows how to reorder the icons on the [Connected GOT list] screen.

1. Tap [Sort] in the menu on the [Connected GOT list] screen to display the [Sort connected GOT list] screen.

2. Select an icon to be moved.

No. Item Description 1) Move to the top button Moves the icon to the top.

2) Move forward button Moves the icon one position forward.

3) Move backward button Moves the icon one position backward.

4) Move to the end button Moves the icon to the end.

1) 3)2) 4)

Tap to display the [Sort connected GOT list] screen.

Tap the icon to be moved.

32 5 ALARM RECEPTION 5.4 Reordering the Icons in the Connected GOT List

3. Tap any of the move buttons to move the icon to an intended position.

4. Tap [Apply] to close the [Sort connected GOT list] screen.

Before moving the icon

Move buttons

[Apply]

After moving the icon

5 ALARM RECEPTION 5.5 Receiving Notifications on a Smart Watch via the Mobile Terminal 33

5

5.5 Receiving Notifications on a Smart Watch via the Mobile Terminal

Configure the settings so that the notifications displayed on the mobile terminal are notified to a smart watch. This enables the smart watch to receive alarm notifications via the mobile terminal. The alarms received on the mobile terminal are also displayed on a smart watch. The contents of the display may differ depending on the smart watch. For details on the alarm, check Pocket GOT on the mobile terminal.

For how to configure the settings to notify the notifications displayed on the mobile terminal to a smart watch, refer to the manual of the mobile terminal or the smart watch to be used. Settings are not required for Pocket GOT. Direct interaction between the smart watch and GOT is not available.

An alarm occurs.

GOT being monitored

Notification received on the mobile terminal is notified to

the smart watch.

Check Pocket GOT on the mobile terminal for details on

the alarm.

Smart watch

Pocket GOT Occurred [GOT3] An abnormal temperature has been detected.

Mobile terminal

34 5 ALARM RECEPTION 5.6 Precautions

5.6 Precautions

When a communication error has occurred with 20 mobile terminals connected Up to 20 mobile terminals can be connected to one GOT simultaneously. When a mobile terminal has a communication error, the GOT remains in the connected state during the alarm monitoring cycle + 1 minute maximum. Therefore, when a communication error occurs in one of the 20 mobile terminals that are connected to one GOT, no additional mobile terminal can be connected during the alarm monitoring cycle + 1 minute maximum. The following shows an example.

Alarm monitoring while the mobile terminal is in sleep mode The application operates in the background during alarm monitoring. The operations of this application are restricted during sleep mode by the power saving setting of the mobile terminal and alarms cannot be monitored in the specified alarm cycle of Pocket GOT. If there are no alarm notifications during sleep mode, set the mobile terminal not to restrict the use of applications in the background.

Precautions for collection cycle Depending on the number of GOTs to be monitored for alarms and performance of the mobile terminal on which the application runs, such as a CPU score, number of threads, and memory size, collection may not be possible as specified in the collection cycle setting.

Precautions for connection to GT SoftGOT2000 Up to 20 mobile terminals can be simultaneously connected to one personal computer on which GT SoftGOT2000 runs. When Pocket GOT and the GOT Mobile function are used, up to 20 mobile terminals can be simultaneously connected to one personal computer on which GT SoftGOT2000 runs. Example: When 15 mobile terminals using the GOT Mobile function are connected, up to 5 mobile terminals using Pocket GOT can be connected.

Device 1 Device 2 Device 3 Device 20

A GOT is connected to 20 mobile terminals

(Example)

Communication error in the device 20

The GOT is connected to the mobile terminals 1 to 20 during the alarm monitoring cycle + 1 minute maximum

Device 1 Device 2 Device 3 Device 20 Device 21

Device 21 cannot be connected to the GOT during the alarm

monitoring cycle + 1 minute maximum

When a communication error occurs in a device

5 ALARM RECEPTION 5.6 Precautions 35

5

Number of alarms that can be received from one alarm ID Up to five alarms can be received from one alarm ID. If there are more than five alarms, the one with the most recent occurrence date and time is received. If there are alarms with the same occurrence date and time, the one with the smallest monitored alarm number is received. The alarms older than the most recent five alarms are not displayed in the alarm list. To check all the alarms, do so using the GOT Mobile function of Pocket GOT.

Behavior of the mobile terminal when waking up from sleep mode The Pocket GOT's alarm cycle is reset when the mobile terminal screen is turned on. Only occurrences are notified while the mobile terminal is in sleep mode. The contents of notification upon turning on of the screen depend on the statuses of the alarms after their occurrences are notified during sleep mode. If an alarm status remains unchanged after occurrence: The notification received during sleep mode is notified again. If an alarm statuses is changed after occurrence: Checked or reset is notified. If multiple alarms are occurring: The notifications are provided according to the notification priority setting. For the notification priority setting, refer to the following. Page 20 Registration of Alarm Notification Setting For notification receive examples, refer to the following. Page 35 Alarms to be notified

Alarms to be notified High-priority notifications are displayed one by one per connected GOT. Only the alarms whose statuses are Occurred in the GOT are notified while the mobile terminal is in sleep mode. The following shows notification receive examples when the mobile terminal screen is off (sleep mode) and on. Example 1) While the mobile terminal is in sleep mode, the following occurs within one alarm cycle of Pocket GOT. Occurrence only

Alarm notification setting Occurred: Always ON Checked: ON Reset: ON

GOT alarm status

Occurred Checked Reset

Alarm notification status

Occurred Occurred Checked Reset

Pocket GOT's alarm cycle

Resetting the alarm cycle with screen turning on

: Mobile terminal screen off (sleep mode)

: Mobile terminal screen on

Mobile terminal's screen status

The notification received during sleep mode is

notified again when the mobile terminal screen

is turned on.

36 5 ALARM RECEPTION 5.6 Precautions

Example 2) While the mobile terminal is in sleep mode, the following occurs within one alarm cycle of Pocket GOT. Occurred, checked, and reset in one alarm event (Alarm notification setting for Checked and that for Reset are on.)

*1 If one alarm occurs and is checked within one alarm cycle of Pocket GOT, Checked is notified when the screen is turned on. Example 3) When the mobile terminal screen is on, the following occurs within one alarm cycle of Pocket GOT. Occurred, checked, and reset in one alarm event (Alarm notification setting for Checked and that for Reset are off.)

*1 If one alarm occurs and is checked within one alarm cycle of Pocket GOT, Occurred is notified when the alarm notification setting for check is off.

Alarms to be notified while the mobile terminal is in sleep mode Only occurrences are notified while the mobile terminal is in sleep mode. The notification display differs depending on the GOT Mobile function version of the system application (extended function).

Example of notification display during sleep mode GOT Mobile function version of the system application (extended function)

[There is new information] is displayed. Earlier than 01.45.000 (Earlier than GT Designer3 Version 1.275M)

The message set in the user alarm settings is displayed. 01.45.000 or later (GT Designer3 Version 1.275M or later)

Occurred Checked Reset

Alarm notification setting Occurred: Always ON Checked: ON Reset: ON

GOT alarm status

Alarm notification status

Pocket GOT's alarm cycle

The notification is not provided during

sleep mode. Reset

Reset is notified when the mobile terminal screen is turned on.

Resetting the alarm cycle with screen turning on

*1

: Mobile terminal screen off (sleep mode)

: Mobile terminal screen on

Mobile terminal's screen status

Occurred Checked Reset

Alarm notification setting Occurred: Always ON Checked: OFF Reset: OFF

GOT alarm status

Alarm notification status

Pocket GOT's alarm cycle

Occurred

Occurred is notified because Checked and

Reset notifications are off.

: Mobile terminal screen on

Mobile terminal's screen status

*1

6 SENDING WORKING MEMO 6.1 Working Memo Screen Display 37

6

6 SENDING WORKING MEMO

6.1 Working Memo Screen Display The following describes how to display the working memo screen.

1. Select the connected GOT on the [Connected GOT list] screen to display [Alarm list].

2. Tap the [Working memo] tab and create a working memo.

Select a GOT

38 6 SENDING WORKING MEMO 6.2 Functions of Working Memo

6.2 Functions of Working Memo The following describes the functions of the working memo.

No. Item Description 1) Header memo Displays the [Header memo detail edit] screen for entering the header of the working memo when tapped.

2) New text memo Displays the text memo detail edit screen, and registers the created text memo. Up to 15 text memos can be registered.

3) Camera shooting Displays the camera shooting screen and registers the captured image as an image memo. Up to 3 images can be registered in combination with image selection.

4) Image selection Displays the image selection screen, and registers the selected image as an image memo. Up to 3 images can be registered in combination with camera shooting.

5) Send working memo Sends the created working memo and saves it to the SD card inserted in the GOT.

6) Date Set the date to be displayed in the header memo.

7) Time Set the time to be displayed in the header memo.

8) [Title] Enter the title to be displayed in the header memo.

9) [Place] Enter the place to be displayed in the header memo.

10) [Prepared by] Enter the person who filled out the memo to be displayed in the header memo.

2) 3) 4) 5)

1) 7)

8)

9)

10)

6)

[Header memo detail edit] screen[Working memo]

6 SENDING WORKING MEMO 6.3 Menu for Working Memo 39

6

6.3 Menu for Working Memo The following shows the menu of the working memo.

No. Item Description 1) [Connected GOT setting] Displays the [Connected GOT setting] screen.

2) [Save working memo] Saves the working memo being edited to the mobile terminal.

3) [Edit working memo] Opens the list of saved working memos. Select the one to display and edit.

4) [Delete working memo] Opens the list of saved working memos. Select the one to delete.

5) [Edit a sent working memo] Opens the list of working memos saved in the SD card inserted in the GOT. Select the one to display and edit.

6) [Set as the default screen] Sets the screen currently displayed as the default screen to be displayed when the [Working memo] tab is opened.

7) [Create a new entry] Deletes the current edition and displays a new working memo.

1)

4)

2) 3)

7) 6) 5)

40 6 SENDING WORKING MEMO 6.4 Interacting with Process Remote Monitoring

6.4 Interacting with Process Remote Monitoring The equipment status on the GOT recorded in the working memo is collected by iQ Monozukuri Process Remote Monitoring, and can be checked at once on the personal computer. For the details of the Process Remote Monitoring, refer to the following. Instruction manual for iQ Monozukuri Process Remote Monitoring

HUB

router

Excel

HTML formatCSV format

7 DISPLAYING MOBILE SCREEN 7.1 How to Display Mobile Screen 41

7

7 DISPLAYING MOBILE SCREEN The GOT Mobile function is used to monitor controllers from information devices such as tablets through the GOT.

7.1 How to Display Mobile Screen The following describes how to display the mobile screen.

1. Tap the GOT to be checked on the [Connected GOT list] to display the [Alarm list].

2. Tap [GOT Mobile connection] in [Alarm list].

Tap a GOT

Tap [GOT Mobile connection]

42 7 DISPLAYING MOBILE SCREEN 7.1 How to Display Mobile Screen

3. When the default browser has been set, the connection authentication screen is displayed. When the default browser has not been set, the connection authentication screen is displayed when the browser is selected. Select Google Chrome as the browser.

4. After logging into the browser, the mobile screen is displayed.

Select the browser to be displayed (Only when the default browser is not set)

Connection authentication screen

Display the mobile screen

8 TROUBLESHOOTING 43

8

8 TROUBLESHOOTING For the troubleshooting for Pocket GOT, refer to the following.

Symptom Cause Corrective action The communication between Pocket GOT and GOT timed out, although it had been possible until now.

The communication between Pocket GOT and GOT has been interrupted.

Check the connection status with the GOT. The power is ON. The GOT is not offline. There is no problem with the connection between

the access point and GOT.

Check the connection status of the mobile terminal. The Wi-Fi connection status is stable.

Pocket GOT cannot communicate with the GOT.

Common The mobile terminal and GOT are not connected to the same network. (For example, the mobile terminal is not connected to Wi-Fi.)

Connect the GOT and mobile terminal to the same network such as Wi-Fi.

The IP address is different. Check the IP address of Pocket GOT and GOT. Set an IP address that can be communicated with.

Factor on the GOT side The FTP server setting on the GOT side is not configured. Or, the setting is not correct.

Check the FTP server setting on the GOT side.

Factor on the mobile terminal side

The information of the GOT registered in Pocket GOT is not correct.

Check that the GOT information is registered correctly in the connected GOT setting of Pocket GOT.

The FTP server setting of Pocket GOT is not configured. Or, the setting is not correct.

Check that the FTP setting of Pocket GOT is the same as the FTP setting of the GOT.

The Wi-Fi setting on the mobile terminal is not correct although a wireless LAN communication unit is used on the GOT side.

Disable DHCP in the Wi-Fi setting on the mobile terminal side and set the static IP address.

Match the static IP address on the mobile terminal side to the static IP address of the wireless LAN IP address on the GOT side.

Additional condition Two or more mobile terminals cannot be connected to GT27 and GT25.

The FTP server (GOT) is being accessed from multiple mobile terminals simultaneously.

Enable multiple access on the GOT side. The number of simultaneously connectable devices can be increased up to four devices using GS404. (GT27 and GT25)

When an import or export is performed, the directory of the connected GOT information cannot be set in the system setting.

The directory path including the file name (with an extension) is longer than 247 characters.

Select a folder with a short directory path. Edit the directory path to make it shorter.

Alarm monitoring delays or no notification is provided while the mobile terminal is in sleep mode.

Pocket GOT operates in the background during alarm monitoring. Due to the setting of the mobile terminal, application operations or wireless LAN may be restricted while the mobile terminal is in sleep mode, and operation cannot be performed according to the specified collection cycle.

Check the setting of the mobile terminal. Clear the setting related to power saving. Configure the setting to allow background

operation of Pocket GOT even during sleep mode. Configure the setting to maintain the wireless LAN

connection even during sleep mode. Turn off the Bluetooth scanning for location

information. Change the communication settings for mobile

data used in the background. Disable battery optimization for Pocket GOT.

The application notification setting is not allowed. Check the device setting and allow the Pocket GOT notification.

The trial period of the GOT Mobile function has expired.

Check the GOT Mobile function license is installed on the GOT to be monitored.

Pocket GOT was shut down when another application was operated.

Restart Pocket GOT and start monitoring.

When the battery capacity is low, the Android OS is in power saving mode.

Check the setting on the device and cancel the power saving mode.

44 8 TROUBLESHOOTING

Notifications cannot be received on a smart watch.

Pairing between the mobile terminal and smart watch is not established.

Check the pairing between the mobile terminal and smart watch. Establish pairing if it is not established.

Notification setting is not configured for the smart watch.

Check the notification setting of the mobile terminal and that of the smart watch.

Notification is not available depending on mobile terminal and smart watch combinations.

Check if notification is available for the mobile terminal and smart watch combination.

Pairing is canceled when the mobile terminal enters sleep mode.

Check the setting of the mobile terminal. Clear the setting related to power saving. Turn off the Bluetooth scanning for location

information.

The import destination or export destination set in the application with version 1.0.0.0 is not displayed.

The application is compatible with Android 11. Specification of an import destination or export destination is abolished in the application with version 1.0.0.1 or later.

Tap twice [Application version] in the [System setting] screen to display the import destination or export destination set in the application with version 1.0.0.0.

Import or export operation does not work. For import and export operations, an Android file manager app is used. Some file manager apps may not operate properly. Example: When performing an import or export after deleting a folder or file selected in the file manager app

Update the file manager app version. User a different file manager app. Do not delete a folder or file sleeted in the file

manager app before import or export operation.

Symptom Cause Corrective action

9 RESTRICTIONS 45

9 9 RESTRICTIONS The following shows the restrictions for Pocket GOT.

No. Item Description 1 Storage of the mobile terminal If there is not enough free space for storage, this mobile application may not operate properly.

2 Memory of the mobile terminal If there is not enough memory for operation, this mobile application may not operate properly. Shut down other mobile applications that are running at the same time to free up memory before using this mobile application.

3 Font size setting of the mobile terminal When the font size is set to other than the default, the text layout may be broken or the displayed text may be cut off.

4 Continuous tapping of the button When a button (such as the [Back] button) is tapped quickly in succession, the screen may return multiple times. In this case, data may not be saved or other malfunctions may occur.

5 Operation while the activity indicator is displayed

If the screen is transitioned during processing of this mobile application, the processing may be interrupted. If the processing is interrupted, some buttons cannot be pressed. In this case, restart this mobile application.

6 Resolution If the resolution of the mobile terminal to be used is low, the screen may not be displayed properly.

7 Mobile application privileges Some functions cannot be used for this mobile application unless access to the camera and storage and other privileges are enabled. When you enable a privilege while using this mobile application, restart the application. When this mobile application is restarted while it is being used, the interrupted contents may not be saved.

8 Sleep mode of the mobile terminal screen

When the mobile terminal screen is in the sleep mode, it may restrict the operation of this mobile application. This mobile application may not operate properly after returning from the sleep mode.

9 Battery consumption of the mobile terminal

Alarm monitoring runs in Pocket GOT's alarm cycles even while the mobile terminal is in sleep mode. Setting a short alarm cycle may affect the battery consumption.

10 Starting multiple mobile applications When multiple mobile applications are started, they may be automatically shut down due to the function of Android OS. After operating an application other than this mobile application, check that this mobile application is running.

46 9 RESTRICTIONS

MEMO

10 OPEN SOURCE SOFTWARE 10.1 Arc.UserDialogs 47

10

10 OPEN SOURCE SOFTWARE

10.1 Arc.UserDialogs The MIT License (MIT) Copyright (c) 2016 Allan Ritchie

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

10.2 NETStandard.Library The MIT License (MIT) Copyright (c) .NET Foundation and Contributors All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

48 10 OPEN SOURCE SOFTWARE 10.3 Newtonsoft.Json

10.3 Newtonsoft.Json The MIT License (MIT) Copyright 2020 Newtonsoft Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

10.4 Prism.Unity.Forms The MIT License (MIT) Copyright (c) .NET Foundation All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

10 OPEN SOURCE SOFTWARE 10.5 ReactiveProperty 49

10

10.5 ReactiveProperty The MIT License (MIT) Copyright (c) 2018 neuecc, xin9le, okazuki Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

10.6 Rg.Plugins.Popup The MIT License (MIT) Copyright (c) 2020 Kirill Lyubimov Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

50 10 OPEN SOURCE SOFTWARE 10.7 System.ComponentModel.Annotations

10.7 System.ComponentModel.Annotations The MIT License (MIT) Copyright (c) .NET Foundation and Contributors All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

10.8 System.Threading.Tasks.Extensions The MIT License (MIT)

Copyright (c) .NET Foundation and Contributors

All rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

10 OPEN SOURCE SOFTWARE 10.9 Xamarin.Essentials 51

10

10.9 Xamarin.Essentials Xamarin.Essentials The MIT License (MIT) Copyright (c) Microsoft Corporation All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

10.10 Xamarin.Forms The MIT License (MIT) Copyright (c) Microsoft Corporation All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

52 10 OPEN SOURCE SOFTWARE 10.10 Xamarin.Forms

MEMO

11 Upgraded Additional Function List 53

11

11 Upgraded Additional Function List This chapter describes the functions added by upgraded Pocket GOT version.

Added or modified function Applicable Pocket GOT version Supported: Alarm notification to a smart watch via mobile terminal 1.0.0.1

Compatible with Android 11

Added: Alarm statuses (Checked, Reset) to be notified 1.0.0.2

Supported: Notification priority setting

Supported: Reordering of the icons on the [Connected GOT list] screen

Supported: [Alarm list] filtering

Increased: Contents of the alarm notification

Supported: Display of the input range on the [Alarm notification setting] screen and on the [GOT Mobile connection setting] screen

54 11 Upgraded Additional Function List

MEMO

55

REVISIONS * The manual number is given on the bottom left of the back cover.

Revision date * Manual No. Revision February 2022 SH(NA)-082512ENG-A First edition

October 2022 SH(NA)-082512ENG-B Compatible with Pocket GOT Version1.0.0.2 Added: Alarm statuses (Checked, Reset) to be notified Supported: Notification priority setting Supported: Reordering of the icons on the [Connected GOT list] screen Supported: [Alarm list] filtering Increased: Contents of the alarm notification

This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in this manual.

2022 MITSUBISHI ELECTRIC CORPORATION

56 SH(NA)-082512ENG-B

INTELLECTUAL PROPERTY RIGHTS Trademarks Microsoft, Microsoft Access, Excel, SQL Server, Visual Basic, Visual C++, Visual C#, Windows, Windows NT, Windows Server, and Windows Vista are trademarks of the Microsoft group of companies. Unicode is either a registered trademark or a trademark of Unicode, Inc. in the United States and other countries. Android, Google Chrome, Google Play, and Google Play Logo are either trademarks or registered trademarks of Google LLC. SHARP and AQUOS are either registered trademarks or trademarks of Sharp Corporation. Bluetooth is either a trademark or registered trademark of Bluetooth SIG, Inc. The company names, system names and product names mentioned in this technical bulletin are either registered trademarks or trademarks of their respective companies. In some cases, trademark symbols such as '' or '' are not specified in this technical bulletin. Copyrights The screens (screenshots) are used in accordance with the Microsoft Corporation guideline.

SH(NA)-082512ENG-B(2210)MEE MODEL: - MODEL CODE: -

Specifications subject to change without notice.

When exported from Japan, this manual does not require application to the Ministry of Economy, Trade and Industry for service transaction permission.

HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN NAGOYA WORKS : 1-14 , YADA-MINAMI 5-CHOME , HIGASHI

Manualsnet FAQs

If you want to find out how the GT25 Mitsubishi works, you can view and download the Mitsubishi GT25 Mobile App Operating Manual on the Manualsnet website.

Yes, we have the Operating Manual for Mitsubishi GT25 as well as other Mitsubishi manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operating Manual should include all the details that are needed to use a Mitsubishi GT25. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Mitsubishi GT25 Mobile App Operating Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Mitsubishi GT25 Mobile App Operating Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Mitsubishi GT25 Mobile App Operating Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Mitsubishi GT25 Mobile App Operating Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Mitsubishi GT25 Mobile App Operating Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.