Mitsubishi GOT2000 GT25-WLAN-U-JE LAN User's Manual PDF

1 of 1
1 of 1

Summary of Content for Mitsubishi GOT2000 GT25-WLAN-U-JE LAN User's Manual PDF

User's Manual

GT25-WLAN

Thank you for choosing Mitsubishi Electric Graphic Operation Terminal (GOT)

2013 MITSUBISHI ELECTRIC CORPORATION

GOT2000 Series Wireless LAN Communication Unit

Prior to use, please read both this manual and detailed manual thoroughly to fully understand the product.

MODEL GT25-WLAN-U-JE

MODEL CODE

1D7MM2

IB(NA)-0800522-M(2202)MEE

SAFETY PRECAUTIONS (Always read these precautions before using this equipment.)

Before using this product, please read this manual and the relevant manuals intro- duced in this manual carefully and pay full attention to safety to handle the product correctly. The precautions given in this manual are concerned with this product. In this manual, the safety precautions are ranked as "WARNING" and "CAUTION".

Note that the CAUTION level may lead to a serious accident according to the circumstances. Always follow the precautions of both levels because they are important to per- sonal safety. Please save this manual to make it accessible when required and always forward it to the end user.

[DESIGN PRECAUTIONS]

[INSTALLATION PRECAUTIONS]

Indicates that incorrect handling may cause hazardous conditions, resulting in death or severe injury.

Indicates that incorrect handling may cause hazardous conditions, resulting in medium or slight personal injury or physical damage.

To maintain the security (confidentiality, integrity, and availability) of the GOT and the system against unauthorized access, DoS*1 attacks, computer viruses, and other cyberattacks from unreliable networks and devices via network, take appropriate measures such as firewalls, virtual private networks (VPNs), and antivirus solutions. Mitsubishi Electric shall have no responsibility or liability for any problems involving GOT trouble and system trouble by unauthorized access, DoS attacks, computer viruses, and other cyberattacks. *1 DoS: A denial-of-service (DoS) attack disrupts services by overloading systems or exploiting vulnerabilities, resulting in a denial-of-service (DoS) state.

Be sure to shut off all phases of the external power supply used by the system before mounting or removing this unit to/from the GOT. Not doing so can cause a unit failure or malfunction.

WARNING

CAUTION

WARNING

WARNING

[INSTALLATION PRECAUTIONS]

[STARTUP AND MAINTENANCE PRECAUTIONS]

[PRECAUTIONS FOR REMOTE CONTROL]

[DISPOSAL PRECAUTIONS]

[TRANSPORTATION PRECAUTIONS]

Before Using the Product

[Precautions for Use] Do not modify this wireless LAN communication unit in any way. Doing so is prohibited by the Japan Radio Law. Data transfer in wireless LAN communication may not be as stable as that in cable communication. A packet loss may occur depending on the surrounding environment and the installation location. Be sure to perform a confirmation of operation before using this product.

Use this unit in the environment that satisfies the general specifications described in the GOT2000 Series User's Manual (Hardware). Not doing so can cause an electric shock, fire, malfunction or product damage or deterioration.

Do not drop the unit or subject it to string shock. A unit damage may result.

When installing this unit to the GOT, fit it to the side interface of GOT and tighten the mounting screws in the specified torque range (0.10 Nm to 0.14 Nm) with a Phillips-head screwdriver No.1. When the GOT is installed vertically, its side interface is positioned on the bottom. To prevent the falling of the wireless LAN communication unit from the side interface, install or remove the unit while holding it with hands. Undertightening can cause a drop, failure or malfunction. Overtightening can cause a drop, failure or malfunction due to screw or unit damage.

Before starting cleaning, always shut off GOT power externally in all phases. Not doing so can cause a unit failure or malfunction. Undertightening can cause the GOT to drop, short circuit or malfunction. Overtightening can cause a short circuit or malfunction due to the damage of the screws or unit.

Do not disassemble or modify any unit. This will cause failure, malfunction, injuries, or fire.

Do not touch the conductive areas and electronic parts of this unit directly. Doing so can cause a unit malfunction or failure.

Always make sure to touch the grounded metal to discharge the electricity charged in the body, etc., before touching the unit. Failure to do so may cause a failure or malfunctions of the unit.

Remote control is available through a network by using GOT functions, including theSoftGOT-GOT link function, the remote personal computer operation function, the VNC server function, and the GOT Mobile function. If these functions are used to perform remote control of control equipment, the field operator may not notice the remote control, possibly leading to an accident. In addition, a communication delay or interruption may occur depending on the network environment, and remote control of control equipment cannot be performed normally in some cases. Before using the above functions to perform remote control, fully grasp the circumstances of the field site and ensure safety.

Dispose of this product as industrial waste.

Make sure to transport the GOT main unit and/or relevant unit(s) in the manner they will not be exposed to the impact exceeding the impact resistance described in the general specifications of the User's Manual for the GOT used, as they are precision devices. Failure to do so may cause the unit to fail. Check if the unit operates correctly after transportation.

When fumigants that contain halogen materials such as fluorine, chlorine, bromine, and iodine are used for disinfecting and protecting wooden packaging from insects, they cause malfunction when entering our products. Please take necessary precautions to ensure that remaining materials from fumigant do not enter our products, or treat packaging with methods other than fumigation (heat method). Additionally, disinfect and protect wood from insects before packing products.

CAUTION

WARNING

CAUTION

WARNING

CAUTION

CAUTION

[Precautions for radio-frequency interference] 1) This product operates in the 2.4 GHz band, which is used for industrial, scientific

and medical applications (such as microwave ovens), customer-premises radio stations for identifying mobile units (licensed), specific low-power radio stations (license-free), and amateur radio stations (licensed).

2) Before using this product, make sure that customer-premises radio stations for identifying mobile units, specific low-power radio stations, and amateur radio stations are not operational near the product.

3) In the event that this product causes harmful radio-frequency interference with a customer-premises radio station for identifying mobile units, immediately stop the emission of radio waves and take countermeasures to prevent interference, such as changing the frequency and location of the product.

4) Contact your local sales office if you have any problems caused by this product, such as harmful radio-frequency interference with the radio stations mentioned above.

[Security Precautions] Wireless LAN uses radio waves instead of LAN cables to send and receive data between a computer and a wireless LAN access point, making it possible to freely establish a LAN connection within a range of the radio waves. However, radio waves can be received through obstacles, such as walls, when within the range. Therefore, if security settings are not made, the following problems may occur.

Unauthorized viewing of data An unauthorized third party can intercept the radio waves and sneak a look at user ID and password.

Unauthorized access An unauthorized third party can access network and cause the following damage: - Intercepting personal information and confidential information (information

leak) - Using a false identity to communicate and disclose information illegally

(identity theft) - Changing and transmitting intercepted data (tampering) - Damaging data and systems by spreading a computer virus (destruction)

The wireless LAN communication unit and wireless LAN access point have security features to counter these problems. Configuring the security settings before using the wireless LAN equipment can help to prevent these problems from occurring. The security settings of the wireless LAN equipment are not configured at the time of purchase. To reduce security problems, configure all security settings of the wireless LAN equipment according to the manual before using the wireless LAN communication unit and wireless LAN access point. Please be aware that the security settings do not provide complete security protection due to wireless LAN specifications. If you are unable to configure the security settings yourself, please contact your local authorized dealer. The customer is responsible for configuring the security settings and understanding the risks inherent in using the product without the security settings configured.

Manuals The following shows manuals relevant to this product.

For detailed manuals and relevant manuals, refer to the e-Manual or PDF manuals stored in the DVD-ROM for the screen design software used.

The latest manuals are also available from MITSUBISHI ELECTRIC FA Global Website (www.MitsubishiElectric.com/fa).

Compliance with the new China RoHS directive GOT

6 6

Manual name Manual number (Model code)

GOT2000 Series User's Manual (Hardware) (Sold separately)

SH-081194ENG (1D7MJ5)

GOT2000 Series User's Manual (Utility) (Sold separately)

SH-081195ENG (1D7MJ6)

GOT2000 Series Connection Manual (Microcomputers, MODBUS/Fieldbus Products, Peripherals) For GT Works3 Version1

SH-081200ENG

Note: This symbol mark is for China only.

Pb

Hg

Cd

Cr(VI)

PBB

PBDE

SJ/T11364 : GB/T26572

: GB/T26572

Referenced Standard: GB/T15969.2 (Requirement of Chinese standardized law)

Packing List After unpacking the box, check that the following products are included.

FCC Part 15 Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC CAUTION Change or modifications not expressly approved by the party responsible for compliance could void the users authority to operate to the equipment.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled enviroment and meets the FCC radio frequency(RF) EXposure Guidelines in Supplement C to OET65. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body (excluding extremities:hands, wrists, feet and ankles).

1. OVERVIEW This users manual describes the GOT2000 Series wireless LAN communication unit (hereinafter referred to as the wireless LAN communication unit). The wireless LAN communication unit is used to perform the operations such as transferring data from a personal computer to the GOT or FA transparent function in wireless LAN communication. 1) GOT action mode: access point

The GOT operates as a wireless LAN access point (base station) to communicate with other stations (clients) such as a personal computer.

Model Product Quantity

GT25- WLAN

Wireless LAN communication unit 1

GOT2000 LAN / GOT2000 Series Wireless LAN Communication Unit User's Manual (This manual)

1

GOT2000 /GOT2000 LAN

1

Pb

Hg

Cd

Cr(VI)

PBB

PBDE

GT25-WLAN

Personal computer

GOT

Access point (base station)

Station (client)

Smartphone

Station (client)

2) GOT action mode: station The GOT operates as a station (client) to connect to a wireless LAN access point (base station). Other stations (clients) such as a personal computer can communicate with the GOT through the wireless LAN access point (base station).

For the usable GOTs, refer to the following. GOT2000 Series User's Manual (Hardware)

For the setting and system configuration of wireless LAN function, refer to the following.

GT Designer3 (GOT2000) Screen Design Manual GOT2000 Series User's Manual (Utility) GOT2000 Series Connection Manual (Microcomputers, MODBUS/Fieldbus Products, Peripherals) For GT Works3 Version1

2. SPECIFICATIONS The following shows the performance specifications of the wireless LAN communication unit. The general specifications of the wireless LAN communication unit are the same as those of the GOT. For the general specifications of the GOT, refer to the following.

GOT2000 Series User's Manual (Hardware) Use compatible versions of the screen design software and BootOS. - Screen design software:

GT Works3 Version1.105K or later (for use as a station (client)) GT Works3 Version1.144A or later (for use as an access point (base station) or a station (client))

- BootOS : Version C or later

*1 IEEE802.11n only supports 2.4-GHz-bandwidth. *2 The values of data rates (11Mbps and others), used in this document and the

setting screen, are the theoretical maximum of the wireless LAN standard. These values do not indicate the effective data rates.

*3 When security authentication is performed by WEP or TKIP method, the wireless LAN communication unit cannot communicate by IEEE802.11n. To communicate by IEEE 802.11n, perform the security authentication by WPA-PSK(AES) or WPA2-PSK(AES) method.

*4 A wireless LAN access point (commercial product) compatible with IEEE802.11b/g/n standards is required separately.

*5 The product with hardware version A or later (manufactured in December 2013) complies with the regulation. The product with hardware version A can be used only in Japan.

*6 The product with hardware version B or later (manufactured from October 2014) complies with the regulation. The product with hardware version B or later can be used in Japan, the United States, the EU member states, Switzerland, Norway, Iceland, and Liechtenstein.

*7 The product with hardware version D or later (manufactured from May 2016) complies with the regulation. The product with hardware version D or later can be used in Japan, the United States, the EU member states, Switzerland, Norway, Iceland, Liechtenstein, China (excluding Hong Kong, Macao, and Taiwan), and South Korea.

*8 The product complies with the RE Directive from March 31, 2017.

Item Specifications

Wireless LAN communication specifications

Standard*1 IEEE802.11b/g/n compatible

Channel 11ch (1 to 11ch)

Data rates*2 IEEE802.11b: up to 11Mbps IEEE802.11g: up to 54Mbps IEEE802.11n: up to 72.2Mbps

Maximum RF power 15dBm2dB

Bandwidth (Center frequency) 2412 to 2462 MHz

Wireless connection mode Infrastructure mode

Security*3 64bit/128bit WEP WPA-PSK(TKIP, AES) WPA2-PSK(TKIP, AES)

Number of antennae 1 (Build-in chip antenna)

Action mode Access point (base station), station (client) *4

Maximum number of connectable stations (GOT action mode: access point)

5

Internal current consumption 3.3VDC 0.4A

Weight 0.01kg

Compliance with Japan Radio Law*5, FCC standards*6, RE Directive*8 (R&TTE Directive*6)SRRC*7, KC*7, Radio Equipment Regulations (UKCA)*9

GT25-WLAN Personal computerGOT

Wireless LAN access point (base station)

Station (client) Station (client)

*9 The product with hardware version G or later (manufactured from October 2021) complies with the regulation. The product with hardware version G or later can be used in Japan, the United States, the EU member states, the UK, Switzerland, Norway, Iceland, Liechtenstein, China (excluding Hong Kong, Macao, and Taiwan), and South Korea.

3. PART NAMES AND EXTERNAL DIMENSIONS

4. INSTALLATION AND REMOVAL PROCEDURE

4.1 Unit Installation The installation procedure for the wireless LAN communication unit is explained using the GT2712.

1) Turn off the GOT. 2) Remove the side interface cover of the GOT.

3) Fit the locating lug of the wireless LAN communication unit into the locating groove of the GOT, and install the wireless LAN communication unit to the extension connector.

No. Name Description

1) Mounting screw Screw for fixing the GOT

2) Rating plate -

3) Locating lug Locating lug fit into the locating groove of the GOT

4) Extension connector Extension connector connected to the side interface of the GOT

6. 5

36(1.42)

28 .5

(1 .1

2)

27 (1

.0 6)

1. 5

2)

4)

3)

1)

Unit : mm (inch)

(0 .0

59 )

(0 .2

6)

4) Tighten the mounting screws (2 places) of the wireless LAN communication unit with a No.1 Phillips screwdriver and a torque of 0.10Nm to 0.14Nm to fix the unit.

5) Install the side interface cover to the GOT.

4.2 Unit Removal For removing the wireless LAN communication unit, reverse the procedure of the installation.

5. RE Directive/Radio Equipment Regulations (UKCA)

5.1 RE Directive

EU Declaration of Conformity

5.2 Radio Equipment Regulations (UKCA)

UK Declaration of Conformity

6. PRECAUTIONS To use the wireless LAN communication unit, installing the system application and setting the controller are required.

For the settings and system configuration, refer to the following.

GOT2000 Series Connection Manual (Microcomputers, MODBUS/Fieldbus Products, Peripherals) For GT Works3 Version1

Warranty Mitsubishi Electric will not be held liable for damage caused by factors found not to be the cause of Mitsubishi Electric; machine damage or lost profits caused by faults in the Mitsubishi Electric products; damage, secondary damage, accident compensation caused by special factors unpredictable by Mitsubishi Electric; damages to products other than Mitsubishi Electric products; and to other duties.

For safe use This product has been manufactured as a general-purpose part for

general industries, and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life.

Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger movement vehicles, consult with Mitsubishi Electric.

This product has been manufactured under strict quality control. However, when installing the product where major accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.

HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN

When exported from Japan, this manual does not require application to the Ministry of Economy, Trade and Industry for service transaction permission.

Specifications subject to change without notice. Printed in Japan, February 2022.

Manualsnet FAQs

If you want to find out how the GOT2000 Mitsubishi works, you can view and download the Mitsubishi GOT2000 GT25-WLAN-U-JE LAN User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Mitsubishi GOT2000 as well as other Mitsubishi manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Mitsubishi GOT2000. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Mitsubishi GOT2000 GT25-WLAN-U-JE LAN User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Mitsubishi GOT2000 GT25-WLAN-U-JE LAN User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Mitsubishi GOT2000 GT25-WLAN-U-JE LAN User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Mitsubishi GOT2000 GT25-WLAN-U-JE LAN User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Mitsubishi GOT2000 GT25-WLAN-U-JE LAN User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.