Mitsubishi GOT1000 1D7MD9 Cover User's Manual PDF

1 of 1
1 of 1

Summary of Content for Mitsubishi GOT1000 1D7MD9 Cover User's Manual PDF

User's Manual

GT16-50PCO

Thank you for choosing Mitsubishi Electric Graphic Operation Terminal (GOT).

2011 MITSUBISHI ELECTRIC CORPORATION

GT16 Protective Cover for Oil

Prior to use, please read both this manual and detailed manual thoroughly to fully understand the product.

MODEL GT16-PCO-U

MODEL CODE

1D7MD9

IB(NA)-0800472-E(1906)MEE

SAFETY PRECAUTIONS (Always read these precautions before using this equipment.)

Before using this product, please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly. The precautions given in this manual are concerned with this product. In this manual, the safety precautions are ranked as "WARNING" and "CAUTION".

Note that the CAUTION level may lead to a serious accident according to the circumstances. Always follow the precautions of both levels because they are important to personal safety. Please save this manual to make it accessible when required and always forward it to the end user.

Indicates that incorrect handling may cause hazardous conditions, resulting in death or severe injury.

Indicates that incorrect handling may cause hazardous conditions, resulting in medium or slight personal injury or physical damage.

WARNING

CAUTION

[INSTALLATION PRECAUTIONS]

[DISPOSAL PRECAUTIONS]

Manuals

The following manuals are related to this product.

For relevant manuals, refer to the PDF manuals stored in the DVD-ROM for the drawing software used.

Referenced Standard: GB/T15969.2 (Requirement of Chinese standardized law)

Packing List

The following item is included.

Be sure to shut off all phases of the external power supply used by the system before mounting or removing the GOT main unit to/from the panel. Not doing so can cause the unit to fail or malfunction.

When mounting the GOT to the control panel, make sure to tighten screws within the specified torque range. Undertightening can cause the GOT to drop, short circuit or malfunction. Overtightening can cause a drop, short circuit or malfunction due to the damage of the screws or the GOT.

Dispose of the product as industrial waste.

Detailed Manual

Manual name Manual Number

(Model code)

GT16 User's Manual (Hardware) (Sold separately)

SH-080928ENG (1D7MD3)

Relevant Manuals

Manual name Item Quantity

GT16-50PCO

Protective cover for oil 1

GT16 Protective Cover for Oil User's Manual (This manual)

1

WARNING

CAUTION

CAUTION

1. Overview

This users manual explains the GT16 protective cover for oil (hereinafter referred to as protective cover for oil). Use of the protective cover for oil improves oil resistance and chemical resistance of the GOT.*1

*1 Note that the structure does not guarantee protection in all users' environments. The protective cover for oil may not be used in an environment where it is exposed to oil or chemicals for a long time, or where oil mist fills the air.

The following table shows protective covers for oil and the applicable GOT.

2. Specifications

2.1 General specifications

2.2 Performance specifications

The performance specifications of the protective cover for oil are indicated below.

2.3 Oil resistance, chemical resistance

The protective cover for oil is made of materials with high oil and chemical resistance so that the cover can be used in various oil and chemical atmospheres. Because oils, including cutting oils, contain a small amount of additives depending on oil products, oil resistance of the cover cannot be stated. Prior to use the cover, test the cover in operating environments, and then check the oil and chemical resistance of the cover.

Test contents and oil resistance of cover The protective cover for oil is soaked in the following oils for 2000 hours, and then oil resistance of the cover is checked.

Model Applicable GOT

GT16-50PCO GT1655

Item Specifications

Operating ambient temperature 0C to 50C

Storage ambient temperature -20C to 50C

Operating ambient humidity 10% RH to 90% RH, non-condensing

Storage ambient humidity 10% RH to 90% RH, non-condensing

Item GT16-50PCO

Level of protection

IP67 Caution:The protective cover for oil may not be used

in an environment where it is exposed to oil or chemicals for a long time, or where oil mist fills the

air.

Material Cover: Nitrile rubber, Display: PET sheet

Weight 0.086kg

POINT

For installing the GOT with the protective cover for oil, the control panel thickness must be 2 to 3mm because of the cover thickness. (Control panel thickness without the cover: 2 to 4mm)

3. External Dimensions

Unit: mm (inch)

Oil type Product

Change in appearance

and dimension

Adhesion between

cover and sheet

Oil resistance

Water- insoluble cutting oil

Grinding oil (Yushiron oil CL35)

No change No change

Water- soluble cutting oil

Grinding oil (Noritake cool CG-50P)

No change No change

Dimensions GT16-50PCO

W 178

(7.01)

H 146

(5.75)

D 12

(0.47)

D

Protective cover for oilH

W

4. Installation Procedure

(1)Align the POWER LED window of the cover and the POWER LED of the GOT front panel to ensure that the cover orientation is appropriate.

(2) Stretch one corner of the cover, and fit it to the corner of the GOT front panel.

(3) Starting from one corner, fit the other corners of the cover sequentially to the corners of the GOT, and then the sides (in the order of the arrows from A to D). Make sure that the gasket of the GOT rear face is entirely covered.

POINT

To prevent liquid ingress into the control panel, make sure that the gasket is completely covered.

Protective cover for oil POWER LED window

POWER LED

GOT

GOT

Protective cover for oil

Do not overstretch or overbend the cover. Doing so may cause a separation between the sheet and rubber.

Stretch the corner of the cover and fit it to the corner of the GOT.

A

B

C

D

Starting from the upper left corner, fit the sides of the protective cover for oil in the order from A to D.

Make sure that the corners of the protective cover for oil align those of the GOT front panel.

(4) Mount the GOT onto the control panel. When the control panel is dirty, clean the control panel. The panel cutting dimensions and mounting screw tightening torque with the protective cover for oil are the same as those without the cover. Mount the GOT onto the control panel by referring to GT16 User's Manual (Hardware).

POINT

For attaching the protective cover for oil to the GOT already mounted on the control panel, follow the procedures as below. Remove the GOT from the control panel.Make sure to

externally shut off all phases of the power supply and remove all cables from the GOT in advance.

Clean dirt off surfaces of the GOT and control panel.

Protective cover for oil

Panel cut dimensions

Mounting metal fixture Control panel

5. Precautions for Use

(1) The protective cover for oil is a consumable product. Check the cover for scratch, damage or dirt at regular intervals, and replace with new one if necessary.

(2) Do not push the protective cover for oil with pointed tools, including mechanical pencils and screwdrivers. Doing so causes scratches and damages of the cover.

(3) Do not clean the protective cover for oil with bleaches, thinners, organic solvents, corrosive chemicals, and others. Doing so causes changes in shape and color of the cover.

(4) When the protective cover for oil is attached to the GOT, do not stretch and bend the cover too much. Doing so may cause a separation between the sheet and rubber.

(5) Do not place or use the protective cover for oil in direct sunshine.

(6) When the protective cover for oil gets dusts, wipe the dusts off with a damp cloth.

(7) White particles may adhere to the rubber frame of the protective cover for oil, which does not affect the quality of the cover. Wipe the frame with a cloth moistened with isopropyl alcohol or ethanol as necessary.

(8) When the protective cover for oil is used, the USB connector on the GOT front face cannot be used.

(9) Do not attach and remove the protective cover for oil frequently. Doing so reduces oil resistance and chemical resistance.

(10) Note that the structure does not guarantee protection in all users' environments. The protective cover for oil may not be used in an environment where it is exposed to oil or chemicals for a long time, or where oil mist fills the air.

Warranty Mitsubishi Electric will not be held liable for damage caused by factors found not to be the cause of Mitsubishi Electric; machine damage or lost profits caused by faults in the Mitsubishi Electric products; damage, secondary damage, accident compensation caused by special factors unpredictable by Mitsubishi Electric; damages to products other than Mitsubishi Electric products; and to other duties.

For safe use This product has been manufactured as a general-purpose part for

general industries, and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life.

Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger movement vehicles, consult with Mitsubishi Electric.

This product has been manufactured under strict quality control. However, when installing the product where major accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.

USA

Brazil

Mexico

Germany

UK

Italy

Spain

France

Czech

Turkey

Poland

Russia

South Africa

China

Taiwan

Korea

Singapore

Thailand

Indonesia

Vietnam

India

Australia

Country/Region Sales office/Tel

Mitsubishi Electric Automation, Inc. 500 Corporate Woods Parkway, Vernon Hills, IL 60061, U.S.A. Tel: +1-847-478-2100 Mitsubishi Electric do Brasil Comercio e Servicos Ltda. Avenida Adelino Cardana, 293, 21 andar, Bethaville, Barueri SP, Brasil CEP 06401-147 Tel: +55-11-4689-3000 Mitsubishi Electric Automation, Inc. Mexico Branch Mariano Escobedo #69, Col. Zona Industrial, Tlalnepantla Edo. Mexico, C.P.54030 Tel: +52-55-3067-7511 Mitsubishi Electric Europe B.V. German Branch Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany Tel: +49-2102-486-0 Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Hertfordshire, AL10 8XB, U.K. Tel: +44-1707-28-8780 Mitsubishi Electric Europe B.V. Italian Branch Centro Direzionale Colleoni - Palazzo Sirio, Viale Colleoni 7, Agrate Brianza (MB), Italy Tel: +39-039-60531 Mitsubishi Electric Europe B.V. Spanish Branch Carretera de Rubi 76-80-Apdo.420, 08190 Sant Cugat del Valles (Barcelona), Spain Tel: +34-935-65-3131 Mitsubishi Electric Europe B.V. French Branch 25, Boulevard des Bouvets, 92741 Nanterre Cedex, France Tel: +33-1-55-68-55-68 Mitsubishi Electric Europe B.V. Czech Branch Avenir Business Park, Radlicka 751/113e, 158 00 Praha 5, Czech Republic Tel: +420-251-551-470 Mitsubishi Electric Turkey A.S. Umraniye Branch Serifali Mahallesi Nutuk Sokak No:5, TR-34775 Umraniye / Istanbul, Turkey Tel: +90-216-526-3990 Mitsubishi Electric Europe B.V. Polish Branch ul. Krakowska 50, 32-083 Balice, Poland Tel: +48-12-347-65-00 Mitsubishi Electric (Russia) LLC St. Petersburg Branch Piskarevsky pr. 2, bld 2, lit Sch, BC Benua, office 720; RU-195027 St. Petersburg, Russia Tel: +7-812-633-3497 Adroit Technologies 20 Waterford Office Park, 189 Witkoppen Road, Fourways, Johannesburg, South Africa Tel: +27-11-658-8100 Mitsubishi Electric Automation (China) Ltd. No.1386 Hongqiao Road, Mitsubishi Electric Automation Center, Shanghai, China Tel: +86-21-2322-3030 SETSUYO ENTERPRISE CO., LTD. 6F, No.105, Wugong 3rd Road, Wugu District, New Taipei City 24889, Taiwan Tel: +886-2-2299-2499 Mitsubishi Electric Automation Korea Co., Ltd. 7F-9F, Gangseo Hangang Xi-tower A, 401, Yangcheon-ro, Gangseo-Gu, Seoul 07528, Korea Tel: +82-2-3660-9530 Mitsubishi Electric Asia Pte. Ltd. 307 Alexandra Road, Mitsubishi Electric Building, Singapore 159943 Tel: +65-6473-2308 Mitsubishi Electric Factory Automation (Thailand) Co., Ltd. 12th Floor, SV.City Building, Office Tower 1, No. 896/19 and 20 Rama 3 Road, Kwaeng Bangpongpang, Khet Yannawa, Bangkok 10120, Thailand Tel: +66-2682-6522 to 31 PT. Mitsubishi Electric Indonesia Gedung Jaya 11th Floor, JL. MH. Thamrin No.12, Jakarta Pusat 10340, Indonesia Tel: +62-21-3192-6461 Mitsubishi Electric Vietnam Co., LTD. Ho Chi Minh Head Office Unit 01-04, 10th Floor, Vincom Center, 72 Le Thanh Ton Street, District 1, Ho Chi Minh City, Vietnam Tel: +84-8-3910-5945 Mitsubishi Electric India Pvt. Ltd. Pune Branch Emerald House, EL -3, J Block, M.I.D.C., Bhosari, Pune - 411026, Maharashtra, India Tel: +91-20-2710-2000 Mitsubishi Electric Australia Pty. Ltd. 348 Victoria Road, P.O. Box 11, Rydalmere, N.S.W. 2116, Australia Tel: +61-2-9684-7777

HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN

When exported from Japan, this manual does not require application to the Ministry of Economy, Trade and Industry for service transaction permission.

Specifications subject to change witho

Manualsnet FAQs

If you want to find out how the GOT1000 Mitsubishi works, you can view and download the Mitsubishi GOT1000 1D7MD9 Cover User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Mitsubishi GOT1000 as well as other Mitsubishi manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Mitsubishi GOT1000. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Mitsubishi GOT1000 1D7MD9 Cover User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Mitsubishi GOT1000 1D7MD9 Cover User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Mitsubishi GOT1000 1D7MD9 Cover User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Mitsubishi GOT1000 1D7MD9 Cover User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Mitsubishi GOT1000 1D7MD9 Cover User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.