Mitsubishi GOT2000 GT15-60ATT-77 Attachment User's Manual PDF

1 of 1
1 of 1

Summary of Content for Mitsubishi GOT2000 GT15-60ATT-77 Attachment User's Manual PDF

User's Manual

GT15-70ATT-98 GT15-70ATT-87 GT15-60ATT-97 GT15-60ATT-96 GT15-60ATT-87 GT15-60ATT-77 GT15-50ATT-95W GT15-50ATT-85

Thank you for choosing Mitsubishi Electric Graphic Operation Terminal (GOT).

2004 MITSUBISHI ELECTRIC CORPORATION

ATTACHMENT (for 5.7", 8.4", 10.4")

(for GOT2000/GOT1000 Series)

Prior to use, please read both this manual and detailed manual thoroughly to fully understand the product.

MODEL GT15-ATT-U

MODEL CODE

1D7M02

IB(NA)-0800296-H(2208)MEE

lSAFETY PRECAUTIONSl (Always read these precautions before using this equipment.)

Before using this product, please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly. The precautions given in this manual are concerned with this prod- uct. In this manual, the safety precautions are ranked as "DANGER" and "CAUTION".

Note that the CAUTION level may lead to a serious accident according to the circumstances. Always follow the precautions of both levels because they are import- ant to personal safety. Please save this manual to make it accessible when required and always forward it to the end user.

Indicates that incorrect handling may cause hazardous conditions, resulting in death or severe injury.

Indicates that incorrect handling may cause hazardous conditions, resulting in medium or slight personal injury or physical damage.

WARNING

CAUTION

[INSTALLATION PRECAUTIONS]

[DISPOSAL PRECAUTIONS]

Manuals

The following shows manuals relevant to this product.

For relevant manuals, refer to the PDF manuals stored in the GT Designer3 DVD-ROM.

Referenced Standard: GB/T15969.2 (Requirement of Chinese standardized law)

Product Components The attachment consists of the following items.

When mounting the attachment to the control panel, tighten clamp screws in the specified torque range so that it will be securely fixed. Failure to do so may cause the attachment to drop from the control panel.

When mounting the GOT to the attachment, tighten clamp screws in the range of 0.36 to 0.48Nm so that it will be securely fixed. Loose tightening may cause the GOT to drop from the attachment. Overtightening may damage and drop screws and/or GOT, causing the GOT to drop off, fail or malfunction.

Dispose of this product as industrial waste.

Detailed Manual

Manual name Manual number

(Type code)

GOT2000 Series Users Manual (Hardware) (Sold separately)

SH-081194ENG (1D7MJ5)

GT16 User's Manual (Hardware) (Sold separately)

SH-080928ENG (1D7MD3)

GT15 User's Manual (Sold separately)

SH-080528ENG (1D7M23)

Relevant Manuals

Model Product Quantity

GT15-70ATT-98 Attachment 1

Clamp screw (M4x8mm) 4

GT15-70ATT-87 Attachment 1

GT15-60ATT-97 GT15-60ATT-96 GT15-60ATT-87 GT15-60ATT-77

Attachment 1

Clamp screw (M4x8mm) 4

GT15-50ATT-95W GT15-50ATT-85

Attachment 1

CAUTION

CAUTION

1. Overview

This User's Manual describes the GOT2000/GOT1000 series panel fixing attachment (hereafter abbreviated as the attachment). The attachment is used for replacing the products listed in the table below with the GOT2000 series or GOT1000 series. Use of the attachment eliminates the need for additional machining of the control panel or similar enclosure. There are the following attachment types. Refer to the following manuals for the applicable GOT. GOT2000 Series User's Manual (Hardware) GT16 User's Manual (Hardware) GT15 User's Manual

*1 The GP250 and GP260 manufactured by SCHNEIDER EJH can also be replaced.

2. Specifications

The following table indicates the performance specifications of the attachment. The general specifications of the attachment are the same as those of the GOT. For the general specifications of the GOT, refer to the user's manual of the GOT for which the attachment is to be used. After replacement, GOT with the attachment is IP4X-rated but not IP67F-rated (waterproof and dustproof).

Unit: kg (lb)

Unit: kg (lb)

Product Model Description

Attachment

GT15-70ATT-98 For replacing GT168 , GT158 , A985GOT *1

GT15-70ATT-87 For replacing A870GOT-SWS/ TWS or A8GT-70GOT-TB/TW/ SB/SW

GT15-60ATT-97 For replacing GT167 , GT157 , or A97 GOT

GT15-60ATT-96 For replacing A960GOT

GT15-60ATT-87 For replacing A870GOT-EWS, A8GT-70GOT-EB/EW, A77GOT- EL, or A77GOT-EL-S5/S3

GT15-60ATT-77 For replacing A77GOT-CL, A77GOT-CL-S5/S3, A77GOT-L, or A77GOT-L-S5/S3

GT15-50ATT-95W For replacing A956WGOT, F940WGOT

GT15-50ATT-85 For replacing A85 GOT

Item Specifications

GT15- 70ATT-98

GT15- 60ATT-97

GT15- 60ATT-96

GT15- 70ATT-87

Mounting panel thickness

2 to 3 mm (0.08 to 0.12 inch)

Weight 0.29(0.64) 0.40(0.88) 0.24(0.53) 0.12(0.26)

Item

Specifications

GT15- 60ATT-87

GT15- 50ATT-85

GT15- 50ATT-

95W

GT15- 60ATT-77

Mounting panel thickness

2 to 3 mm (0.08 to 0.12 inch)

Weight 0.25(0.55) 0.11(0.24) 0.17(0.37) 0.34(0.75)

3. Part Names and External Dimensions

(1) GT15-70ATT-98, GT15-60ATT-97, GT15-60ATT-96, GT15-60ATT-87, GT15-60ATT-77

Unit: mm (inch)

Model name A B C

GT15-70ATT-98 314 (12.4) 240 (9.4) 8.5 (0.3)

GT15-60ATT-97 300 (11.8) 212 (8.3) 8.5 (0.3)

GT15-60ATT-96 270 (10.6) 195 (7.7) 8.5 (0.3)

GT15-60ATT-87 278 (10.9) 195 (7.7) 8.5 (0.3)

GT15-60ATT-77 313 (12.3) 195 (7.7) 8.5 (0.3)

No. Name Description

1 Upper hook Hook for hanging the attachment on the control panel upper part.

2 Lower hook Hook for hanging the attachment on the control panel lower part.

3 Clamp screw Screw for fixing the attachment to the control panel (M4x8mm)

C

B

A

1)

3)

2)

(2) GT15-70ATT-87

Unit: mm (inch)

(3) GT15-50ATT-95W, GT15-50ATT-85

Unit: mm (inch)

4. Installation Procedure

(1) GT15-70ATT-98, GT15-60ATT-97, GT15-60ATT-96, GT15-60ATT-87, GT15-60ATT-77

The following figures show an example of the GT15-60ATT-97 installation. Follow the same procedure for installing the other models. 1) The model is indicated on the attachment.

The upper part of the attachment has the model indication. (Example of model indication)

Model A B C

GT15-70ATT-87 311 (12.2) 222 (8.7) 5.5 (0.2)

Model A B C

GT15-50ATT-95W 216 (8.1) 137 (5.4) 2.6 (0.1)

GT15-50ATT-85 194 (7.6) 137 (5.4) 2.6 (0.1)

C

B

A

C

B

A

Upper part

Lower part

Upper part

Lower part

Model

2) Hang the two upper hooks on the upper part over the mounting holes in the control panel. Refer to the figure shown in 1).

3) While lifting the attachment upward, hang the two lower hooks on the lower part of the control panel.

4) Fix the attachment to the control panel with four clamp screws in the torque range of 0.2 to 0.28Nm.

5) Place the GOT into the attachment from the front, and fix it by tightening the mounting screws included with the GOT in the torque range of 0.36 to 0.48Nm.

(2) GT15-70ATT-87, GT15-50ATT-95W, GT15-50ATT-85

The following figures show an example of the GT15-70ATT-87 installation. Follow the same procedure for installing the other models.

1) The model is indicated on the attachment. The position of the model indication does not affect the performance of the attachment. (Example of model indication)

2) Remove two-sided tapes from the rear face of the attachment.

3) Fix the attachment to fit the mouting hole on the control panel. If the control panel is dirty, the attachment might fall, causing an injury. Wipe the control panel, and then install the attachment.

4) Place the GOT into the attachment from the front, and fix it by tightening the mounting screws included with the GOT in the torque range of 0.36 to 0.48Nm.

Upper part

Lower part

Upper part

Lower part

Model

Warranty Mitsubishi Electric will not be held liable for damage caused by factors found not to be the cause of Mitsubishi Electric; machine damage or lost profits caused by faults in the Mitsubishi Electric products; damage, secondary damage, accident compensation caused by special factors unpredictable by Mitsubishi Electric; damages to products other than Mitsubishi Electric products; and to other duties.

For safe use This product has been manufactured as a general-purpose part for

general industries, and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life.

Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger movement vehicles, consult with Mitsubishi Electric.

This product has been manufactured under strict quality control. However, when installing the product where major accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.

Country/Region Sales office/Tel

USA Mitsubishi Electric Automation, Inc. 500 Corporate Woods Parkway, Vernon Hills, IL 60061, U.S.A. Tel: +1-847-478-2100

Brazil Mitsubishi Electric do Brasil Comercio e Servicos Ltda. Avenida Adelino Cardana, 293, 21 andar, Bethaville, Barueri SP, Brazil Tel: +55-11-4689-3000

Mexico Mitsubishi Electric Automation, Inc. Mexico Branch Boulevard Miguel de Cervantes Saavedra 301, Torre Norte Piso 5, Ampliacion Granada, Miguel Hidalgo, Ciudad de Mexico, Mexico, C.P.11520 Tel: +52-55-3067-7512

Germany Mitsubishi Electric Europe B.V. German Branch Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany Tel: +49-2102-486-0

UK Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, UK-Hatfield, Hertfordshire, AL10 8XB, U.K. Tel: +44-1707-28-8780

Italy Mitsubishi Electric Europe B.V. Italian Branch Centro Direzionale Colleoni - Palazzo Sirio, Viale Colleoni 7, 20864 Agrate Brianza (MB), Italy Tel: +39-039-60531

Spain Mitsubishi Electric Europe B.V. Spanish Branch Carretera de Rubi, 76-80-Apdo. 420, E-08190 Sant Cugat del Valles (Barcelona), Spain Tel: +34-935-65-3131

France Mitsubishi Electric Europe B.V. French Branch 25, Boulevard des Bouvets, 92741 Nanterre Cedex, France Tel: +33-1-55-68-55-68

Czech Mitsubishi Electric Europe B.V. Czech Branch Pekarska 621/7, 155 00 Praha 5, Czech Republic Tel: +420-255 719 200

Turkey Mitsubishi Electric Turkey A.S. Umraniye Branch Serifali Mahallesi Nutuk Sokak No:5, TR-34775 Umraniye / Istanbul, Turkey Tel: +90-216-526-3990

Poland Mitsubishi Electric Europe B.V. Polish Branch ul. Krakowska 48, 32-083 Balice, Poland Tel: +48-12-347-65-00

Russia Mitsubishi Electric (Russia) LLC St. Petersburg Branch Piskarevsky pr. 2, bld 2, lit "Sch", BC "Benua", office 720; 195027 St. Petersburg, Russia Tel: +7-812-633-3497

South Africa Adroit Technologies 20 Waterford Office Park, 189 Witkoppen Road, Fourways, South Africa Tel: +27-11-658-8100

China Mitsubishi Electric Automation (China) Ltd. Mitsubishi Electric Automation Center, No.1386 Hongqiao Road, Shanghai, China Tel: +86-21-2322-3030

Taiwan SETSUYO ENTERPRISE CO., LTD. 6F, No.105, Wugong 3rd Road, Wugu District, New Taipei City 24889, Taiwan Tel: +886-2-2299-2499

Korea Mitsubishi Electric Automation Korea Co., Ltd. 7F to 9F, Gangseo Hangang Xi-tower A, 401, Yangcheon-ro, Gangseo-Gu, Seoul 07528, Korea Tel: +82-2-3660-9569

Singapore Mitsubishi Electric Asia Pte. Ltd. 307 Alexandra Road, Mitsubishi Electric Building, Singapore 159943 Tel: +65-6473-2308

Thailand Mitsubishi Electric Factory Automation (Thailand) Co., Ltd. 12th Floor, SV.City Building, Office Tower 1, No. 896/19 and 20 Rama 3 Road, Kwaeng Bangpongpang, Khet Yannawa, Bangkok 10120, Thailand Tel: +66-2682-6522 to 31

Indonesia PT. Mitsubishi Electric Indonesia Gedung Jaya 8th Floor, JL. MH. Thamrin No.12, Jakarta Pusat 10340, Indonesia Tel: +62-21 3192-6461

Vietnam Mitsubishi Electric Vietnam Company Limited 11th & 12th Floor, Viettel Tower B, 285 Cach Mang Thang 8 Street, Ward 12, District 10, Ho Chi Minh City, Vietnam. Tel: +84-28-3910-5945

India Mitsubishi Electric India Pvt. Ltd. Pune Branch Emerald House, EL-3, J Block, M.I.D.C., Bhosari, Pune - 411026, Maharashtra, India Tel: +91-20-2710-2000

Australia MITSUBISHI ELECTRIC AUSTRALIA PTY. LTD. 348 Victoria Road, P.O. Box 11, Rydalmere, N.S.W 2116, Australia Tel: +61-2-9684-7777

HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN N

Manualsnet FAQs

If you want to find out how the GT15-60ATT-77 Mitsubishi works, you can view and download the Mitsubishi GOT2000 GT15-60ATT-77 Attachment User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Mitsubishi GT15-60ATT-77 as well as other Mitsubishi manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Mitsubishi GT15-60ATT-77. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Mitsubishi GOT2000 GT15-60ATT-77 Attachment User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Mitsubishi GOT2000 GT15-60ATT-77 Attachment User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Mitsubishi GOT2000 GT15-60ATT-77 Attachment User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Mitsubishi GOT2000 GT15-60ATT-77 Attachment User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Mitsubishi GOT2000 GT15-60ATT-77 Attachment User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.